Trabajos research engineer en Valley Stream, New YorkCrear alertas

Job Description CNC Machine Maintenance Engineer - Massapequa, NY About our Client: Our Client is a global provider within a wide range of areas, including but not limited to aerospace and defense platforms, automation and manufacturing, and the medical and healthcare fields, all aiming toward advancing cutting-edge research and development. Higher Talent Group values its reputation for finding high-quality people, which is why we will conduct a screening to determine if this is a good fit for you. We will share further details such as the culture, how progression works within the company, etc. SUMMARY OF POSITION The CNC Machine Maintenance Engineer position is responsible for performing highly diversified duties to install, troubleshoot, repair, and maintain production and facility equipment according to safety, predictive, and productive maintenance systems and processes to support the achievement of the site’s business goals and objectives. ESSENTIAL DUTIES AND RESPONSIBILITIES The essential duties and responsibilities of this position are listed below. This list is not all-inclusive and may be amended from time to time. • Perform highly diversified duties to install and maintain production machines and the plant facility’s equipment., • Provide emergency/unscheduled repairs of production equipment during production and perform scheduled maintenance repairs of production equipment during machine service. Must have experience with Vacuum Braze Ovens., • Perform simple machinist duties and responsibilities., • Perform mechanical skills, including, but not limited to, mechanical, electrical, pneumatic, hydraulic, troubleshooting, and repair of production machines., • Read and interpret equipment manuals and work orders to perform required maintenance and service., • Diagnose problems, replace or repair parts, test, and make adjustments., • Perform regular preventive maintenance on machines, equipment, and plant facilities., • Perform a variety of plumbing maintenance and carpentry functions., • Use a variety of hand and power tools, electric meters, and material handling equipment in performing duties., • Detect faulty operations, defective material, and report those and any unusual situations to proper supervision., • Comply with safety regulations and maintain clean and orderly work areas. QUALIFICATIONS, KNOWLEDGE, SKILLS, AND EXPERIENCE REQUIRED • Technical Capacity., • Good Troubleshooting Ability., • Ethical Conduct., • Communication Proficiency., • Results Driven., • Initiative., • Valid Driver’s License., • Experience with the maintenance of CNC Machines or Vacuum Braze Ovens EDUCATION AND/OR EXPERIENCE • High school diploma/GED and completion of a craft apprenticeship, or an equivalent number of years of education and production maintenance experience., • 2+ years of manufacturing experience; some hydraulic, pneumatic, mechanical, and industrial skills with PLC experience, Industrial and Commercial electric, and HVAC., • AA in mechanical or electrical Engineering or a Certificate in Analytical Troubleshooting preferred. 5+ years in manufacturing/facilities maintenance preferred. PHYSICAL DEMANDS • While performing the duties of this job, the employee is regularly required to talk and hear. This position is very active and requires standing, walking, bending, kneeling, stooping, crouching, crawling, and climbing all day. The employee must frequently lift and/or move items over 50 pounds., • Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Fine manipulation and repetitive motion may be required for some duties. OTHER • Due to contracts with the United States Government, the candidate must be either a U.S. citizen or a Green card holder. COMPENSATION The anticipated salary range for this position is $110,000 to $125,000 annually. This range reflects the base salary for candidates who meet the requirements of the role, including experience, education, and location. Salary Disclaimer: Where a specific pay range is noted, it is a good-faith estimate only. At the time of this posting, the actual salary offered will be based on experience, skills, qualifications, market/business considerations, and geographic location. BENEFITS • Medical Plan, • Telehealth, • Prescription Drug Program, • Employee Assistance Program (EAP), • Dental Plan, • Vision Plan, • Retirement Plan with company match, • Paid Time Off, • Health Savings Account and/or Flexible Spending Accounts, • Life and AD&D Insurance, • Disability Insurance (Short and Long Term offerings) NOTE The above is presented as a matter of occupational information and guidance only; all other reasonable tasks, duties, and responsibilities that management may deem necessary for satisfactory performance may be included. ABOUT HIGHER TALENT GROUP Higher Talent Group offers candidates full-time opportunities at companies hiring nationwide. We also provide resume and career coaching services for individuals who require assistance in getting back into the workforce or for candidates who want to start looking for a new opportunity discreetly. Want to learn more? Check out our website for additional information.

Leads research, design, and development activities to improve NYPA's energy services. Designs, constructs, and tests equipment. Ensures that standards of quality, cost, safety, reliability, timeliness, and performance are met throughout all engineering activities. Provide technical expertise to power-producing machines, such as generators and turbines, as well as rotating machines, such as refrigeration and building systems and fire protection. Ensures that standards of quality, cost, safety, reliability, timeliness and performance are met throughout all engineering activities. • Provide lead engineer function in support of a wide range of design modification projects, equipment applications and failure research, engineering studies, and operations and maintenance activities., • Perform site visits to complete field condition assessments, and equipment evaluations and develop technical recommendations with moderate complexity., • Perform occasional emergency response, including outside of normal business hours., • Independently coordinate cross disciplinary activities for the successful development and execution of projects., • Select and apply codes, standards and procedures to work tasks appropriately., • Perform evaluations to ensure engineering requirements and Authority specifications are satisfied., • Provide technical leadership in state-of-the-art engineering and analytical techniques., • Review designs, calculations, specifications, and reports produced by other internal engineers and external consultants., • Provide direction and review for the mechanical design and drafting personnel in the development of project drawings (site-based)., • For assigned work and projects, provide supervision of maintenance department(s) staff, and contractors, and prepare and monitor the day-to-day work activities of the crafts. Work with planners in scheduling work activities; oversee the safety of employees. Review job packages to ensure they are complete and current prior to performance of the work. Review completed work, job packages, and work orders to verify all steps are complete and to ensure that all data/information is recorded., • Proficient in the design, operation and maintenance of mechanical systems specific to the electric utility industry and power system components with projects related to power generating plant and substation facilities (site-based). (site-based), • Working knowledge of mechanical - commercial and industrial facilities and their various systems and components]., • Ability to apply diverse technical principles and practices, with the understanding of the NYPA's policies, operations and objectives, to engineering deliverables., • Working knowledge of applicable codes, standards, regulations., • Strong verbal and written communication skills., • Collaborative and team-oriented with ability to build relationships with vendors and stakeholders., • Ability to coordinate the technical and commercial aspects of projects., • Ability to perform engineering calculations, and complete specifications, scopes of work, reports, and interdisciplinary design packages., • Competent in the use of Microsoft Office applications., • Working experience with a Mechanical design or forecasting software preferred (site-based)., • Ability to effectively manage and prioritize multiple projects., • Proficient in the design, operation and maintenance of , mechanical systems for commercial and industrial facilities and their various systems and components (Customer-based)., • Bachelor of Science Degree in Mechanical Engineering, or equivalent, from an accredited college or university., • Minimum of eight (8+) years of work-related experience., • New York State Engineer in Training certification preferred., • Approximately 10% travel primarily within NY State. The New York Power Authority is committed to providing fair, competitive, and market-informed compensation. The estimated salary range for this position is $120,000 - $180,000. The salary offered will be determined based on the successful candidates' relevant experience, knowledge, skills, and abilities. The New York Power Authority and Canal Corporation believes that diversity, equity, and inclusion drive our success, and we encourage women, people of color, LGBTQIA+ individuals, people with disabilities, members of ethnic minorities, foreign-born residents and veterans to apply. As an equal opportunity employer, NYPA/Canals is committed to building inclusive, innovative work environments with employees who reflect communities across New York and enthusiastically serve them. We proudly celebrate diversity and do not discriminate based on race/color, creed/religion, national origin, citizenship or immigration status, age, disability, military status, gender/sex, sexual orientation, gender identity/expression, pregnancy and related conditions, familial/marital status, domestic violence victim status, predisposing genetic characteristics, arrest/criminal conviction record or any other category protected by law. NYPA/Canals will also provide reasonable accommodations during the hiring process related to candidates' disabilities, pregnancy-related conditions, religious observances/practices and/or domestic violence concerns. To request an accommodation, please email___.

Responsibilities Provide lead engineer function in support of a wide range of design modification projects, equipment applications and failure research, engineering studies, and operations and maintenance activities. Review designs, calculations, specifications, and reports produced by other intern

Job DescriptionLocation: New York Job Type: Full-Time Salary: Competitive, base on experience Benefits: Health, 401(K) At the company, we are dedicated to providing innovative engineering solutions for a wide range of building systems. We specialize in designing and optimizing mechanical, electrical and plumbing systems to help create sustainable and efficient environments. Our team works collaboratively on projects of all sizes, delivering high-quality solutions that meet our clients' needs. We are seeking a highly skilled and motivated MEP Engineer to join our team. As an MEP Engineer, you will work closely with architects, contractors, and your team to ensure that systems are efficient, cost-effective, and compliant with all regulations and client specifications. Responsibilities include but are not limited to the following: • Design and review HVAC, electrical, fire alarm, plumbing, and sprinkler systems for various projects using AutoCad., • Perform calculations and estimate sizes of systems for projects of all sizes., • Create plans, schematics, make equipment selections, load calculations, systems narratives and specifications., • Conduct field surveys and site evaluations., • Confer with other consultants, clients, and contractors to resolve issues and provide technical information/solutions., • Discuss and provide feedback on equipment selections with manufacturers representatives and project managers., • Research and analyze design specifications, manuals and other data to evaluate the feasibility, cost and maintenance requirements of designs., • Review applicable design standard requirements, codes and regulations as they relate and impact design development., • Complete assignments in a timely manner required to meet deadlines.Qualifications:, • Bachelors degree in Mechanical, Electrical, or a related field., • Proficient in AutoCad and/or Revit, • Proven experience as an MEP Engineer, with expertise in designing MEP systems in commercial and residential buildings., • Strong communication, analytical, and interpersonal skills, • Preferably multi-disciplinary and has strong knowledge of Mechanical, Electrical, and Plumbing systems and local building codes, regulations, and industry standards., • Ability to quickly assess building systems and equipment., • Capable of time management and continued organization., • Ability to multitask and work effectively in a team or individual situations., • Strong problem-solving and critical-thinking abilities., • EIT or PE preferred

Job Description Quality Engineer II - Massapequa, NY About our Client: Our Client is a global provider within a wide range of areas, including but not limited to aerospace and defense platforms, automation and manufacturing, and the medical and healthcare fields, all aiming toward advancing cutting-edge research and development. Higher Talent Group values its reputation for finding good quality people, which is why we will provide a screening to see if this is a good fit for you. We will share further details such as the culture, how progression works within the company, etc. SUMMARY OF POSITION The Quality Engineer II position will work closely to solve quality problems and support new development programs, legacy programs, and conduct internal audits. SUPERVISORY RESPONSIBILITIES • This job has no supervisory responsibilities. ESSENTIAL DUTIES AND RESPONSIBILITIES The essential duties and responsibilities of this position are listed below. This list is not all-inclusive and may be amended from time to time. • Working closely with Engineering to ensure that designs meet applicable quality requirements., • Plan and perform internal quality audits and execute action items., • Lead quality initiatives to reduce scrap and rework by developing and facilitating cross-functional teams., • Conducting quality investigations., • Be an active participant in the material review board., • Provide quality function support by working closely with Sales, Engineering, and Manufacturing to manage customer relations, expectations, needs and satisfaction., • Independently drive and direct actions with departmental groups to maintain MRB and RMA issues., • Drive key quality performance metrics: DPPM, OTD, Cost of Quality, Customer Scorecards, Internal Audit Risk and Effectiveness, Supplier Performance, Contract Review., • Source inspection liaison, • Travel to customer and supplier locations as required. SECONDARY DUTIES AND RESPONSIBILITIES • Supporting new product introduction programs by creating and maintaining the following, as required:, • Production Part Approval Process, • Advanced Product Quality Planning, • Zero Defects Program, • Control Plans, • Inspection Plans, • Inspection Reports, • First Article Inspection Reports, • Supplier Approval and Development, • Attend NPI meetings, including, • Preliminary Design Reviews, • Critical Design Reviews, • Make Buy Reviews, • Monitor the Progress of NPI programs through manufacturing and into production, • Conduct purchase order reviews related to NPI and production programs, • Interact with customers on NPI and production programs, • Engage in problem-solving with engineering, operations, and supply chain on NPI and production programs, • Support shipments of NPI and production programs, • Conduct internal audits, • Become a designated quality representative when required by the customer QUALIFICATIONS, KNOWLEDGE, SKILLS, AND EXPERIENCE REQUIRED • Knowledge of aerospace quality requirements and specifications., • Proven track record of partnering with manufacturing and engineering, • Experience with root cause analysis and corrective action. Experience with formal quality and operations systems., • Capable of reviewing and interpreting drawings, contracts / POs, and applicable processing standards., • Skilled at performing First Article inspections., • Proficiency with MS Office applications: Word, Excel, PowerPoint, and Outlook., • An understanding of the use and application of statistics and SPC., • Six Sigma preferred EDUCATION AND/OR EXPERIENCE • Bachelor’s Degree in Engineering required, • 9 to 10 plus years working in the aerospace and or automotive industry in a quality, engineering, or manufacturing capacity., • Previous experience in a high-mix, low-volume job shop, • Ability to manage priorities and meet deadlines in a fast-paced environment, • Working knowledge of ISO 9001:2015 and AS9100D Quality Management System processes., • Due to ITAR restrictions, an export license may be required OTHER SKILLS • Computer Literacy in Excel, Minitab, CAD, and Visio, • Advanced problem-solving and advanced data analysis techniques, • Knowledge in and experience in 8D problem-solving techniques, SPC, and statistical analysis PHYSICAL DEMANDS • Continuous periods of sitting at a desk and working on a computer and phone., • Prolonged time standing., • Must be able to occasionally lift 25 pounds at a time., • Frequently required to stand, walk, and reach with arms and hands. OTHER • Due to contracts with the United States Government, the candidate must be either a U.S. citizen or a Green card holder. COMPENSATION The anticipated salary range for this position is $100,000 to $120,000 annually. This range reflects the base salary for candidates who meet the requirements of the role, including experience, education, and location. Salary Disclaimer: Where a specific pay range is noted, it is a good-faith estimate only. At the time of this posting, the actual salary offered will be based on experience, skills, qualifications, market/business considerations, and geographic location. BENEFITS • Medical Plan, • Telehealth, • Prescription Drug Program, • Employee Assistance Program (EAP), • Dental Plan, • Vision Plan, • Retirement Plan with company match, • Paid Time Off, • Health Savings Account and/or Flexible Spending Accounts, • Life and AD&D Insurance, • Disability Insurance (Short and Long Term offerings) NOTE The above is presented as a matter of occupational information and guidance only; all other reasonable tasks, duties, and responsibilities that management may deem necessary for satisfactory performance may be included. ABOUT HIGHER TALENT GROUP Higher Talent Group offers candidates full-time opportunities at companies hiring nationwide. We also provide resume and career coaching services for individuals who require assistance in getting back into the workforce or for candidates who want to start looking for a new opportunity discreetly. Want to learn more? Check out our website for additional information.

Job Description About the job Seeking an experienced Director of Product Management with a strong background in medical devices (spine) and product management to lead the product life cycle from concept and development to innovation of Class I, Class II and Class III medical devices. The ideal candidate will have expertise in understanding our customers and develop an intuition around our products to ensure exceptional experience from introduction to delivery of product. Proven leadership skills are essential as the role will also involve working with key stakeholders including cross functional leaders, KOL’s, clients and vendors both domestically and international to ensure the successful execution of product to our end user. Key Responsibilities: Product Strategy & Support • Identify and execute product strategy for the company’s full portfolio to ensure it aligns with business goals., • Contribute to the strategic direction while focusing on cutting-edge technologies and providing regular updates to key stakeholders and senior management., • Identify, develop and execute strategic marketing and business plans to ensure maximum outcome with the goal of continued optimization., • Analyze trends and conduct market research and competitive analysis including voice of customer programs from concept to product launch including feasibility assessment, clinical validation and commercialization., • Collaborate closely with surgeons, clinical specialists, and hospital procurement teams to collect feedback and identify new product opportunities and continuous improvement., • Build key metrics and KPIs to optimize marketing and business strategies., • Lead in developing business cases and financial models to support new product programs and existing product enhancements., • Develop and execute comprehensive product and marketing strategies for the orthopedic/spinal portfolio., • Partner with R&D and manufacturing to define product specifications, prioritize features, and ensure timely and compliant product development., • Lead go-to-market strategy, including product positioning, pricing, catalog development, and promotional planning., • Partner with key leaders to ensure successful results with P&L including achieving targets around sales revenue, margin and operating income., • Manage budget forecasts for both business and financial decisions., • Monitor product performance and collect feedback from customers to identify areas of opportunity for continuous improvement., • Maintain various performance dashboards including KPI’s., • Conduct regular analysis to identify areas for improvement including product enhancements., • Education: Bachelor’s degree in Business Administration, Marketing, Engineer, Life Sciences or similar field. MBA or similar advance degree preferred., • Minimum 7-10 years of experience mid to senior level marketing and/or product management – medical device (spine) industry required., • Experience in the product management of Class I, Class II and Class III medical devices (orthopedic industry a plus) with ability to be solution and results oriented., • Proven ability to influence without direct authority including experience in guiding key stakeholders, senior leadership and cross functional team members toward aligned goals., • Established success rate in testing and launching business processes and initiatives including validating workflow, successful implementations and measurable outcomes., • Strong analytical mindset with ability to interpret market data and customer feedback., • Excellent skills in presentation, communication, leadership, and problem-solving skills., • Computer Programs: MS Office Suite (Excel, Outlook, Word, PowerPoint), ERP Systems a plus., • Endoscopic Technologies: Experience with endoscopic instrument design, optics, and surgical tool integration, • Knowledge of regulatory requirements and clinical practice in medical device industry a plus. This position is full time, on-site and located in our headquarters in Baldwin, NY. An employment offer is based on the candidate's professional experience, specialty, skillset, education, geography, related licenses or certifications, and other business needs. The compensation range indicated does not include other forms of compensation or benefits. We value the diversity of our team and inspire creativity in our innovation. elliquence proudly provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any kind without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state and local laws. We are committed to working with and providing reasonable accommodation to individuals with disabilities. If you need any reasonable accommodation due to a disability for any part of the application process, please email . Powered by JazzHR DUYGGuQCTR

Work closely with an Agile team of experienced software engineers on projects that involve the development and analysis of innovative real-time signal processing solutions. Ability to collaborate effectively in a cross-functional team including hardware, software, and systems engineers. Job Title: S

The Consumer Insights Division of our organization is expanding its nationwide research team. No previous market research or industry experience required. Participate in nationally recognized research initiatives.

Join us to do the best work of your career and make a profound social impact as a Senior Systems Engineer on our Systems Engineering Team in. Familiarity with data science and ML workflows (feature engineering, experimentation, model training/deployment, RAG pipeline development, prompt engineering)

Consult with electrical engineers and other engineering staff to evaluate interface between hardware and software and operational performance requirements of the overall system. Work closely with an Agile team of experienced software engineers on projects that involve the development and analysis of

Join us to do the best work of your career and make a profound social impact as a Senior Systems Engineer on our Systems Engineering Team in. Familiarity with data science and ML workflows (feature engineering, experimentation, model training/deployment, RAG pipeline development, prompt engineering)

Join us to do the best work of your career and make a profound social impact as a Senior Systems Engineer on our Systems Engineering Team in. Familiarity with data science and ML workflows (feature engineering, experimentation, model training/deployment, RAG pipeline development, prompt engineering)

Familiarity with data science and ML workflows (feature engineering, experimentation, model training/deployment, RAG pipeline development, prompt engineering) and tools/languages such as Python, Spark, notebooks, and ML frameworks (e. Sales Engineer, Solutions Architect, Data Engineer, Analytics Con

Join a global team of 35 000 engineers, software developers, and cyber experts who turn complex challenges into reliable, next generation systems that keep warfighters ahead of emerging threats. At Lockheed Martin Rotary & Mission Systems, our Software Engineers create cutting-edge, real-ti

Sales Engineer, Solutions Architect, Data Engineer, Analytics Consultant, or Data Scientist with strong commercial exposure. Join us to do the best work of your career and make a profound social impact as a Senior Systems Engineer on our Systems Engineering Team in. Familiarity with data science and

This isn't a "sit-behind-a-desk" role—you will be the central hub connecting Engineering, Production, and the Customer. Facilitate weekly project reviews to keep Engineering, Procurement, and Production aligned. Proven project management experience specifically within a manufacturing or

Looking for an experienced Business Analyst/Project Manager who will be responsible for understanding and assessing the changing needs of the business.Frequently analyze the impacts of change, document and support communication between relevant groups and stakeholders, and capture requirements neede

DataAnnotation is committed to creating high-quality AI.Join our team to help train the next generation of AI while enjoying the flexibility of remote work and the freedom to set your own schedule.This role is designed to fit a variety of lifestyles — whether youre looking to contribute part-ti

Coordinate with architects, engineers, subcontractors, and vendors.

We rely on the dedication and innovation of our nearly 8000 engineers, scientists, technicians, and support personnel.

Project Manager for Epic Systems Revenue Cycle.We are seeking a highly skilled and experienced Project Manager to join our Project Management Office (PMO) within the IT department.The ideal candidate will have extensive experience in front and back-end revenue cycle workflows and Electronic Health R

This role is focused on training, implementation, and process improvement—not just system administration.This is a full-time, long-term position that will remain in place after the initial rollout.This position will work alongside our existing Implementation Specialist in an equal capacity.Support

Familiarity with data science and ML workflows (feature engineering, experimentation, model training/deployment, RAG pipeline development, prompt engineering) and tools/languages such as Python, Spark, notebooks, and ML frameworks (e. Sales Engineer, Solutions Architect, Data Engineer, Analytics Con

The ideal candidate will be responsible for all project direction, planning, completion, and financial outcome.In order to succeed in this position, the candidate must be organized and have excellent time management skills.Minimum of 2yr experience in project management and coordination in the const

Experience coordinating with expediters, architects, and engineers in NYC. Experience with value engineering and cost control.

We are seeking a skilled Project Manager to join our Project Management Office (PMO) within the IT department.The ideal candidate will have experience in clinical workflows and Electronic Health Record (EHR) systems.This role will be responsible for managing complex clinical projects, ensuring they

DataAnnotation is committed to creating high-quality AI.Join our team to help train the next generation of AI while enjoying the flexibility of remote work and the freedom to set your own schedule.This role is designed to fit a variety of lifestyles — whether you’re looking to con