Rf engineer jobs in Passaic, New JerseyCreate job alerts

This is a field-based position located in Ohio (Cleveland) area.

Senior Embedded Linux Engineer. Troubleshoot and optimize embedded systems for performance, stability, and RF compliance. Hands-on experience with embedded Linux platforms (e.

Job DescriptionJob Title: RF Test EngineerJob Description This role focuses on the design, development, documentation, and production support of RF and microwave components, including active and passive devices, for the telecommunications industry. The RF Test Engineer performs hands-on testing, optimization, and troubleshooting of RF components and systems in both prototype and production environments, ensuring products meet performance specifications and quality standards. Responsibilities • Design, develop, and support the documentation and production of RF and microwave components, including active and passive devices for telecommunications applications., • Follow established RF test procedures and accurately complete detailed test reports for all tested products., • Troubleshoot and optimize discrete power amplifier modules and low noise amplifiers (LNAs) in both prototype and production stages., • Define and construct RF test setups to measure VSWR, gain, group delay, phase variation, IP3, P1dB/P3dB compression points, noise figure, and harmonics for narrowband and broadband high-power amplifiers., • Perform RF testing using network analyzers, power meters, noise figure meters, and other RF test instruments to validate performance and identify issues., • Define and construct test setups to measure VSWR, insertion loss, group delay, and phase variation for passive filtering products., • Test, characterize, and optimize Distributed Antenna Systems (DAS) and related systems, including bi-directional amplifiers and tower-mounted amplifiers for public safety and carrier applications., • Read, interpret, and apply information from electronic and mechanical blueprints to support testing and troubleshooting activities., • Communicate technical information clearly and effectively with internal teams and external clients to resolve issues and support product performance., • Manage multiple tasks and priorities simultaneously while adapting quickly to changing production requirements and schedules., • Document new designs and test configurations thoroughly to support future repeat orders and ensure consistent product performance., • Perform component-level troubleshooting and board-level repair using oscilloscopes, spectrum analyzers, network analyzers, and other laboratory test equipment., • Use test equipment and tools, including PCB test fixtures and soldering equipment, to diagnose, repair, and validate electronic assemblies., • Maintain accurate records of test setups, results, and corrective actions to support continuous improvement and traceability.Essential Skills, • 3–5 years of hands-on experience in testing and optimizing active and passive discrete RF components., • Strong experience in RF testing and RF test equipment at the component level., • Proficiency with RF test instruments such as oscilloscopes, spectrum analyzers, network analyzers, power meters, and noise figure meters., • Demonstrated component-level troubleshooting skills for RF and electronic assemblies., • Experience with board repair, electronic troubleshooting, and use of laboratory test equipment., • Ability to read and understand electronic and mechanical blueprints., • Ability to read and speak English to interpret technical documentation and communicate effectively., • Ability to read and interpret documents such as safety rules and operating procedures., • Strong knowledge of Microsoft Office applications for reporting, documentation, and communication., • Ability to communicate technical information clearly with internal teams and clients., • Ability to work well both in a group and independently, managing tasks and priorities effectively., • Strong interpersonal and communication skills to collaborate within a test engineering team.Additional Skills & Qualifications, • Experience testing and optimizing Distributed Antenna Systems (DAS), bi-directional amplifiers, and tower-mounted amplifiers for public safety and carrier applications., • Experience defining and constructing RF test setups to measure VSWR, gain, group delay, phase variation, IP3, compression points, noise figure, harmonics, insertion loss, and related parameters., • Familiarity with testing passive filtering products and characterizing their RF performance., • Experience with PCB-level work, including soldering and rework for RF and electronic assemblies., • Ability to document new designs, test procedures, and configurations for future repeat orders and production use., • Strong attention to detail in completing test reports and maintaining accurate records of test results., • Proficiency in using microscopes and other laboratory tools for inspection and detailed work on electronic assemblies., • AutoCAD experience or familiarity is a plus for interpreting or supporting design documentation.Work Environment The RF Test Engineer works as part of a dedicated RF test technician team within an engineering-focused environment. The role involves close collaboration with test engineering leadership and engineering teams to support a growing product portfolio in the RF and microwave domain. Work is hands-on and laboratory-based, using advanced RF test equipment such as network analyzers, spectrum analyzers, power meters, noise figure meters, oscilloscopes, microscopes, and other laboratory instruments. The organization is experiencing significant growth and is actively introducing new products, creating opportunities to support new designs and contribute to the expansion of the business. The environment values teamwork, clear communication, and adaptability to changing production requirements, with a strong emphasis on safety, adherence to operating procedures, and high-quality technical documentation. Job Type & Location This is a Contract to Hire position based out of Fair Lawn, NJ. Pay and Benefits The pay range for this position is $25.00 - $35.00/hr. Individual compensation offered for this position within this range will depend on many factors, including qualifications, skills, relevant experience, job knowledge, geographic location, internal equity, and other pertinent job-related factors. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Fair Lawn,NJ. Application Deadline This position is anticipated to close on Sep 23, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 20,000 consultants and 5,000 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. We are proud to be an Engineering News-Record (ENR) Top 500 Design Firm for our engineering design services and a ClearlyRated Best of Staffing® winner for both client and talent service. The company is an equal opportunity employer and will consider all applications withoutregard to race, sex, age, color, religion, national origin, veteran status, disability,sexual orientation, gender identity, genetic information or any characteristic protectedby law. If you would like to request a reasonable accommodation, such as the modification oradjustment of the job application process or interviewing process due to a disability,please email actalentaccommodation@actalentservices.com for other accommodation options. San Francisco Fair Chance Ordinance:Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in thecity and county of San Francisco, we will consider for employment qualified applicantswith arrest and conviction records. Massachusetts Lie Detector:It is unlawful in Massachusetts to require or administer a lie detector test as acondition of employment or continued employment. An employer who violates this lawshall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI):We may use Artificial Intelligence (AI) to support parts of our hiring process,including sourcing, screening, and evaluating candidates. AI helps assess applicationsand qualifications, but final decisions are made by our hiring team. By applying, youacknowledge and agree that your application may be reviewed using AI tools.

Job DescriptionAbout Thea Energy: Thea Energy is leveraging recent breakthroughs in stellarator physics and engineering to create a faster and simpler approach to commercializing fusion energy. The company is reinventing the stellarator using computer-controlled arrays of planar coils thereby replacing the intricate, complex modular magnets required in all other stellarator architectures. Thea Energy is on a mission to create a limitless source of zero emission energy for a sustainable future. Position Overview:Thea Energy is seeking a Sr. Plasma Control Engineer to develop and deploy novel plasma control algorithms for the Eos stellarator, with a strong emphasis on AI and ML assisted control, real-time state estimation, and digital twins. This role sits in the Electrical Engineering and Controls Systems (EECS) team and works day to day with plasma physics, diagnostics, and plant control engineers to bridge plasma physics objectives with plasma control and plant control implementation. If you can develop plasma control algorithms that are robust, constraint-aware, and ready for experimental operation, covering scenario design, supervisory control, and closed-loop regulation of core profiles, edge and divertor regimes, and off-normal response, we would like to hear from you. You will also contribute to subsystem digital twins and data pipelines that enable model development, validation, and deployment.Key Responsibility Areas:Plasma control algorithms and real-time software: • Develop, test, and iterate plasma control algorithms for Eos PCS, including multi-rate feedback, supervisory logic, and constraint handling., • Build AI/ML assisted control modules, such as learning-augmented MPC, reinforcement learning in simulation, physics-based models augmented with data-driven corrections, and adaptive control and auto-tuning across operating conditions, • Develop and deploy real-time state estimation and multi-diagnostic data fusion to produce control-grade plasma state, including robust profile reconstruction and regime indicators suitable for closed-loop operation., • Develop anomaly detection and early-warning indicators across plasma and plant signals, with clear thresholds and graded mitigation actions., • Partner with plasma physicists to translate physics goals into control objectives, observables, constraints, and validation tests.Digital twins and modeling:, • Design and maintain digital twin models for plasma control loops and coupled plant subsystems, enabling simulation, optimization, and controller development and validation., • Build model validation workflows, including post-shot reconstruction, scenario sweeps, sensitivity studies, and uncertainty-aware comparisons against experimental dataData and integration:, • Build and maintain data pipelines for time-series control and diagnostic data, including labeling, archiving, and training and inference workflows., • Integrate algorithms into the control stack in collaboration with EECS, ensuring compatibility with real-time constraints and low-latency inference where needed., • Maintain high software quality: version control, test coverage, reproducible environments, and operational readiness documentation.Ideal Experience & Skillsets: Required qualifications: • BS or MS in Electrical Engineering, Computer Science, Physics, Applied Mathematics, or related field., • 3 or more years of experience developing control algorithms, ML models, or real-time scientific software for complex physical systems., • Strong programming skills in Python, MATLAB and C++., • Experience with time-series data processing, signal conditioning, system identification, and validation on real data., • Practical familiarity with modern ML tooling (PyTorch, TensorFlow, or JAX) and deploying models into production code paths., • Working knowledge of modern control methods, such as state estimation, constrained optimization, MPC, and robust control. Preferred qualifications: • Experience with plasma control, stellarators or tokamaks, or adjacent fields such as accelerators and large scientific infrastructure., • Prior work on digital twins, real-time simulators, or physics-informed ML for physical systems., • Experience integrating with experimental control and data systems (for example EPICS, MDSplus, SCADA, OPC UA)., • Familiarity with low-latency deployment and inference engines such as ONNX Runtime and TensorRT., • Background in any of the following plant subsystems is a plus: power electronics, cryogenics, vacuum and pumping, high-power RF systems, and safety controls. Tools and platforms: • Languages and frameworks: Python, MATLAB, C++, PyTorch or TensorFlow or JAX, Jupyter, • Data infrastructure: MDSplus, EPICS, HDF5, InfluxDB, OPC UA, Kafka or ZeroMQ, • Dev workflows: Git, Docker, MLflow, CI pipelines, • Simulation and modeling: MATLAB Simulink, Modelica, FMI, and custom physics solversCompany Benefits:, • Salary range $120,000-$160,000, • Comprehensive health benefits (e.g. medical/dental/vision), • Employee equity stock options, • 20 days PTORequirements:, • Ability to occasionally lift up to 50 lbs., • Ability to perform activities such as typing, standing, or sitting for extended periods of time., • Willingness to occasionally travel or work required nights/weekends/on-call., • Ability to work in a facility that contains industrial hazards including heat, cold, noise, fumes, strong magnets, high voltage, high current, pressure systems, and cryogenics.It’s not necessary to meet all of the skillsets outlined above. Please feel free to send us a note and tell us why you would still be a great fit for this role or Thea Energy. Diversity and Inclusion: Thea Energy is an equal opportunity employer committed to creating a company of diverse backgrounds. By creating a diverse environment, we will bring new ideas and approaches to solving some of the world’s hardest (and most important) problems. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, gender, sexual orientation, gender identity or expression, national origin, family or marital status, age, disability, veteran’s status, or other characteristic protected by applicable laws and regulations. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job DescriptionRF Test Engineer This role focuses on the design, development, documentation, and production support of RF and microwave components, including active and passive devices, for the telecommunications industry. The RF Test Engineer performs hands-on testing, optimization, and troubleshooting of RF components and systems in both prototype and production environments, ensuring products meet performance specifications and quality standards. Responsibilities • Design, develop, and support the documentation and production of RF and microwave components, including active and passive devices for telecommunications applications., • Follow established RF test procedures and accurately complete detailed test reports for all tested products., • Troubleshoot and optimize discrete power amplifier modules and low noise amplifiers (LNAs) in both prototype and production stages., • Define and construct RF test setups to measure VSWR, gain, group delay, phase variation, IP3, P1dB/P3dB compression points, noise figure, and harmonics for narrowband and broadband high-power amplifiers., • Perform RF testing using network analyzers, power meters, noise figure meters, and other RF test instruments to validate performance and identify issues., • Define and construct test setups to measure VSWR, insertion loss, group delay, and phase variation for passive filtering products., • Test, characterize, and optimize Distributed Antenna Systems (DAS) and related systems, including bi-directional amplifiers and tower-mounted amplifiers for public safety and carrier applications., • Read, interpret, and apply information from electronic and mechanical blueprints to support testing and troubleshooting activities., • Communicate technical information clearly and effectively with internal teams and external clients to resolve issues and support product performance., • Manage multiple tasks and priorities simultaneously while adapting quickly to changing production requirements and schedules., • Document new designs and test configurations thoroughly to support future repeat orders and ensure consistent product performance., • Perform component-level troubleshooting and board-level repair using oscilloscopes, spectrum analyzers, network analyzers, and other laboratory test equipment., • Use test equipment and tools, including PCB test fixtures and soldering equipment, to diagnose, repair, and validate electronic assemblies., • Maintain accurate records of test setups, results, and corrective actions to support continuous improvement and traceability. Essential Skills • 3–5 years of hands-on experience in testing and optimizing active and passive discrete RF components., • Strong experience in RF testing and RF test equipment at the component level., • Proficiency with RF test instruments such as oscilloscopes, spectrum analyzers, network analyzers, power meters, and noise figure meters., • Demonstrated component-level troubleshooting skills for RF and electronic assemblies., • Experience with board repair, electronic troubleshooting, and use of laboratory test equipment., • Ability to read and understand electronic and mechanical blueprints., • Ability to read and speak English to interpret technical documentation and communicate effectively., • Ability to read and interpret documents such as safety rules and operating procedures., • Strong knowledge of Microsoft Office applications for reporting, documentation, and communication., • Ability to communicate technical information clearly with internal teams and clients., • Ability to work well both in a group and independently, managing tasks and priorities effectively., • Strong interpersonal and communication skills to collaborate within a test engineering team. Additional Skills & Qualifications • Experience testing and optimizing Distributed Antenna Systems (DAS), bi-directional amplifiers, and tower-mounted amplifiers for public safety and carrier applications., • Experience defining and constructing RF test setups to measure VSWR, gain, group delay, phase variation, IP3, compression points, noise figure, harmonics, insertion loss, and related parameters., • Familiarity with testing passive filtering products and characterizing their RF performance., • Experience with PCB-level work, including soldering and rework for RF and electronic assemblies., • Ability to document new designs, test procedures, and configurations for future repeat orders and production use., • Strong attention to detail in completing test reports and maintaining accurate records of test results., • Proficiency in using microscopes and other laboratory tools for inspection and detailed work on electronic assemblies., • AutoCAD experience or familiarity is a plus for interpreting or supporting design documentation. Work Environment The RF Test Engineer works as part of a dedicated RF test technician team within an engineering-focused environment. The role involves close collaboration with test engineering leadership and engineering teams to support a growing product portfolio in the RF and microwave domain. Work is hands-on and laboratory-based, using advanced RF test equipment such as network analyzers, spectrum analyzers, power meters, noise figure meters, oscilloscopes, microscopes, and other laboratory instruments. The organization is experiencing significant growth and is actively introducing new products, creating opportunities to support new designs and contribute to the expansion of the business. The environment values teamwork, clear communication, and adaptability to changing production requirements, with a strong emphasis on safety, adherence to operating procedures, and high-quality technical documentation Job Type & Location This is a Contract to Hire position based out of Fair Lawn, NJ. Pay and Benefits The pay range for this position is $25.00 - $35.00/hr. Individual compensation offered for this position within this range will depend on many factors, including qualifications, skills, relevant experience, job knowledge, geographic location, internal equity, and other pertinent job-related factors. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Fair Lawn,NJ. Application Deadline This position is anticipated to close on Sep 23, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 20,000 consultants and 5,000 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. We are proud to be an Engineering News-Record (ENR) Top 500 Design Firm for our engineering design services and a ClearlyRated Best of Staffing® winner for both client and talent service. The company is an equal opportunity employer and will consider all applications withoutregard to race, sex, age, color, religion, national origin, veteran status, disability,sexual orientation, gender identity, genetic information or any characteristic protectedby law. If you would like to request a reasonable accommodation, such as the modification oradjustment of the job application process or interviewing process due to a disability,please email actalentaccommodation@actalentservices.com for other accommodation options. San Francisco Fair Chance Ordinance:Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in thecity and county of San Francisco, we will consider for employment qualified applicantswith arrest and conviction records. Massachusetts Lie Detector:It is unlawful in Massachusetts to require or administer a lie detector test as acondition of employment or continued employment. An employer who violates this lawshall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI):We may use Artificial Intelligence (AI) to support parts of our hiring process,including sourcing, screening, and evaluating candidates. AI helps assess applicationsand qualifications, but final decisions are made by our hiring team. By applying, youacknowledge and agree that your application may be reviewed using AI tools.

Job DescriptionAbout the Role A well-established RF and microwave component manufacturer is looking for a Manufacturing Engineer to support production of high-performance components (VCOs, frequency synthesizers, filters, mixers, and couplers) used in defense, communications, and industrial applications. This is a hands-on, floor-facing role: you will work directly with SMT placement equipment and assembly teams, hand-solder prototype and first-article builds, and drive process improvements that keep production running smoothly. If you enjoy being on the floor as much as at a workstation, and you want to work on cutting-edge RF hardware, this is a strong fit. Salary range: $72,000 - $92,000/year What You'll Do ●Support and improve SMT and hand-assembly processes for RF and microwave components, including operation and programming of Mydata SMT placement equipment. ●Build and hand-solder prototype and first-article assemblies (connectors, coax cable, test fixtures) to IPC workmanship standards. ●Design and build tooling, jigs, and fixtures to support production and reduce assembly time or defects. ●Troubleshoot production issues on the floor, working directly with assemblers and operators to resolve fit, yield, or process problems. ●Support new product introduction (NPI) by helping transition new designs from engineering into a repeatable, efficient production process. ●Document work instructions, process routers, and process improvements; contribute to continuous improvement initiatives. ●Work within ESD-controlled environments when handling RF-sensitive components. What We're Looking For ●Bachelor's degree in Manufacturing, Mechanical, Industrial Engineering, or related field, or equivalent hands-on production experience. ●Proven hand-soldering skill, ideally to IPC-A-610 or similar workmanship standards. ●Experience with SMT placement equipment; Mydata / Mycronic experience is a strong plus, but not required if you have equivalent SMT platform experience and can ramp up quickly. ●Comfort working directly on the production floor alongside assemblers and operators, not solely at a desk. ●Ability to read and interpret assembly drawings, BOMs, and mechanical/electrical schematics. ●Experience in RF/microwave, electronics, or precision manufacturing environments strongly preferred. ●A process-improvement mindset: you notice yield, quality, or efficiency issues on the line and take initiative to fix them. Why Apply ●Work on advanced RF and microwave hardware used in defense and communications applications. ●Direct hire opportunity with a stable, established manufacturer. ●A role that blends engineering problem-solving with real hands-on floor work - not a purely desk-bound position. Experience with SMT placement equipment (Mydata/Mycronic experience a plus) Proven hand-soldering skill, ideally to IPC-A-610 standards Comfortable working directly on the production floor Bachelor's degree in Manufacturing, Mechanical, or Industrial Engineering, or equivalent hands-on experience By applying for this job, you agree to receive calls, Al-generated calls, text messages, or emails from Synerfac Technical Staffing and our contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undeliverable messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy at www.synerfac.com/privacy/

Job Description RF Field Engineer Location: Clifton, NJ C Squared Systems, LLC is an RF engineering, consulting, and software development company specializing in providing services for seamless wireless coverage from RF analysis to design and implementation of DAS systems and Wi-Fi networks to remote monitoring and management of complex multi-vendor environments. Site Portal®, a customizable Web-based software, was engineered by C Squared Systems to remotely monitor and manage these complex multi-vendor environments. Since 1999, C Squared Systems has executed turnkey in-building wireless solutions using state-of-the-art analysis tools to deliver RF solutions that exceed project scope and customer expectations. Our experience, technical expertise, and diverse projects in the wireless realm have allowed C Squared Systems to continually evolve as new technologies are developed and the demands of our customers change. C2 Systems is currently seeking a Radio Frequency (RF)/Field Engineer to join our team. If you are highly motivated and have the ability to work in a fast paced environment, this may be the role for you. You will be interacting with customers and co-workers on a daily basis and providing timely and detailed updates. This position will require you to be in the field 90% of the time. Primary Responsibilities: • Takes the lead on system commissioning, integrations, and activations, • Performs system tests using scanners, spectrum analyzers, transmitters, and other electronic test equipment, • Performs site surveys and in-depth walkthroughs, • Works (hands on) with system components such as antennas, fiber optics, coax, and RF amplifiers, • Troubleshoots and repairs systems for optimal performance, • Application of RF principles/theory (signal path, power, frequency, noise, modulations, etc.), • Multi-tasks on projects on a day-to-day basis, • Maintains test equipment and tools for continuous use, • Travel to various job sites within the tri-state and outlying regions (NY, PA, NJ, CT) Skills/Qualifications: • 2 year college degree (preferably technical) with relevant coursework, • 2+ years of related experience preferred (previous experience with DAS architecture and other cellular systems), • Knowledge of various wireless technologies (CDMA, WCDMA, GSM, LTE, etc.), • Possess strong technical aptitude and the desire to learn and advance within a technical field, • Comfortable working in high pressure situations, • Ability to receive and give direction on an as needed basis, • Knowledge of RF optimization techniques and best practices, • Proficient in basic computer applications (MS Office, etc.), • Must have a valid driver’s license with reliable transportation In addition, you should have the following characteristics: • Self-motivated and have the ability to work effectively under minimal supervision and direction, • Ability to work in groups, • Passion for learning new technologies, • Ability to work in a fast-paced environment, • Strong written and verbal English communication skills

Job Description Job Title: Senior Engineer, Hardware Location: Hoboken, NJ Division: Technology Department: Engineering About Us Quantum Computing Inc. (QCi) (Nasdaq: QUBT) is an innovative, integrated photonics company that provides accessible and affordable quantum machines to the world today. QCi products are designed to operate at room temperature and low power at an affordable cost. The Company’s portfolio of core technology and products offer unique capabilities in the areas of high-performance computing, artificial intelligence, cyber security as well as remote sensing applications. Position Description: We are seeking an experienced and talented Senior Hardware Engineer to be part of our hardware development efforts. As a Senior Hardware Engineer, you will be responsible for designing, developing, and testing advanced hardware systems. This position offers a unique opportunity to apply your expertise and skills in a challenging and innovative technology environment. This position offers a unique opportunity to be at the forefront of quantum technology, contributing to the advancement of groundbreaking solutions in the rapidly evolving field of quantum computing. If you are passionate about changing the world by empowering revolutionary new quantum technologies, we want to hear from you! Duties and Responsibilities: • Support the development of several platforms based around classical and quantum photonics as a senior hardware engineer., • Work alongside other hardware engineers to design custom electronics using Altium Designer., • Evaluate critical component performance via board-level and system-level lab testing (ADCs, DACs, FPGAs, TDCs, etc.), • Work with firmware engineers, software engineers, and quantum scientists during various phases of lab testing., • Work with contract manufacturers during manufacturing phases to procure custom electronics, addressing and mitigating any necessary design changes along the way., • Validate the performance of custom electronics with lab testing. Document any issues uncovered during testing., • Maintain documentation expected at milestone events during the entire design cycle (theory of operations, manufacturing documentation, validation testing results, etc.), • Integrate hardware into the complete system by working closely with mechanical, firmware, and FPGA engineers. Required Skills and Experience: • Bachelor of Science (BS) in Electrical Engineering or Computer Engineering (EE or CE) from an accredited university., • BS in EE or CE and 8+ years of experience or MS EE or CE with 4+ years of experience., • Proven experience designing PCBs from schematic capture, layout design, and review., • Experience with at least one ECAD suite (Altium, OrCAD, Allegro, CircuitMaker, or others) Altium is strongly preferred., • Familiarity with PCB design best practices related to Signal Integrity, Power Integrity, and EMI/EMC compliance., • Strong foundation in PCB design related to DFM, DFT, and DFA best practices., • Strong electrical engineering fundamentals in Analog, Power, and Digital Electronics., • Advanced experience with voltage regulators, LDO, and switch mode power supplies (SMPS)., • Experience with analog electronics design (op-amps, TIAs, filters, etc.), • Experience with digital electronics design (Logic Gates, Flip Flops, Microcontrollers, RAM, ROM, Flash, etc.), • Advanced knowledge of simulation tools such as SPICE., • Strong experience with low to medium-speed digital interfaces and protocols (I2C, CAN, UART, SPI, etc.)\, • Hands-on experience with board bring-up, debugging, testing, and integration with lab instruments such as: DMMs, Oscilloscopes, Logic Analyzers, and Spectrum Analyzers., • Able to code C, C++, MATLAB/Octave, or Python., • Working knowledge of Verilog is a huge plus., • Able to lift weights up to 50lbs (occasionally)., • Excellent problem-solving and analytical skills., • Excellent written and verbal communication skills., • Detail-oriented. Additional Preferred Skills: • Master of Science (MS) degree in Electrical Engineering or Computer Engineering (EE or ECE)., • Experience designing electronics with complex computing devices such as FPGAs, MCUs, CPUs, DSPs, etc., • Experience working with optoelectronics., • Experience with high-speed serial protocols (USB, PCIe, Ethernet, etc.), • Experience with RF analog, digital, and mixed-signal electronics., • Experience designing systems to meet compliance and certification requirements (e.g., CE/FCC)., • Experience integrating custom ASICs into designs., • FPGA/SoC/MCU lab validation with lab equipment., • Experience writing low-level firmware (C, Verilog, VHDL, etc.), • Experience with manual board prototyping/refurbing using essential equipment like soldering irons and hot air guns. Quantum Computing Inc. (QCi) is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, protected veteran status, or any other characteristic protected by applicable federal, state, or local law. Incumbent(s) in this position may be required to perform other duties and special assignments not specifically stated above. Statements outlined in this section are designated as essential job functions in accordance with the Americans with Disabilities Act of 1990.

Job Description Overview: Tekmar Sales Inc. is a leading manufacturer's representative organization specializing in marketing and selling advanced electronic components in RF, Microwave, Millimeter-wave, analog, and digital domains as well as RF and Microwave test equipment. Covering New York, New Jersey, and Eastern Pennsylvania, Role: Sales Engineer Location: Must be located in and work from the Northern New Jersey area Responsibilities: • Support existing customers., • Generate new business in the Northern New Jersey area Qualifications: • Understanding of RF and Microwave components and test equipment., • Proficiency in sales., • Excellent communication and customer service skills., • Bachelor’s degree in Engineering, Business, or a related field. \nCompany Description Tekmar Sales Inc. is a leading manufacturer's representative organization specializing in marketing and selling advanced electronic components in RF, Microwave, Millimeter-wave, analog, and digital domains as well as RF and Microwave test equipment. Covering New York, New Jersey, and Eastern Pennsylvania, Tekmar Sales Inc. is a leading manufacturer's representative organization specializing in marketing and selling advanced electronic components in RF, Microwave, Millimeter-wave, analog, and digital domains as well as RF and Microwave test equipment. Covering New York, New Jersey, and Eastern Pennsylvania,

Job Description Job Title: RF/Systems Engineer Location: Hoboken, NJ Division: Revenue Department: Defense About Us: Quantum Computing Inc. (QCi) (Nasdaq: QUBT) is an innovative, integrated photonics company that provides accessible and affordable quantum machines to the world today. QCi products are designed to operate at room temperature and low power at an affordable cost. The Company’s portfolio of core technology and products offer unique capabilities in the areas of high-performance computing, artificial intelligence, cyber security as well as remote sensing applications. Position Description: We are seeking an experienced and talented RF/Systems Engineer to be part of our developmental efforts. As an RF/Systems Engineer you will be responsible for researching, designing, developing, and applying novel and advanced physical effects in the fields of photonics, quantum sensing, and beyond to the practical missions of RF communications and signal intelligence to provide new strategic capabilities for the warfighter. The ideal candidate will have a strong background in experimentation and the scientific method, having designed and carried out experiments and test plans, as well as a strong background in RF and electromagnetic theory, simulation, and correlating theoretical and simulated predictions with experimentally measured results. This position offers a unique opportunity to apply your expertise and skills in a challenging and innovative technology environment. This position offers a unique opportunity to be at the forefront of quantum technology, contributing to the advancement of groundbreaking solutions in the rapidly evolving field of quantum computing. Duties and Responsibilities: • Support the development of several platforms based around the application of classical and quantum photonics to tactical RF systems as an RF/Systems engineer., • Work alongside other physicists and engineers to design novel and mission- enabling tactical RF systems, • Evaluate critical component performance via board-level and system-level lab testing (LNAs, HPAs, filters, couplers, mixing blocks, etc.), • Work with hardware engineers, mechanical engineers, and quantum scientists during various phases of lab testing., • Evaluate, design, or simulate custom RF antenna apertures, microwave and photonic structures, and devise methods to fabricate and experimentally verify performance., • Integrate custom components into larger tactical systems., • Maintain documentation expected at milestone events during the entire design cycle (theory of operations, manufacturing documentation, validation testing results, etc.), • Perform integration testing to validate system performance. Required Skills and Experience: • Bachelor of Science (BS) in Physics, Engineering Physics, RF Engineering, or Electrical Engineering from an accredited university., • Knowledge of antennas and microwave/photonic circuits., • Experience with at least one computational EM solver (Ansys HFSS, CST Microwave Studio, FEKO, AWG Microwave Office, or others) as well as understanding of the underlying mathematics of various simulation methods (MoM, FDTD, FEM) and their strengths and limitations., • Familiarity with microwave PCB design best practices related to Signal Integrity, Power Handling, Impedance Matching and EMI/EMC compliance., • Strong foundation in PCB and antenna design related to DFM, DFT, and DFA best practices., • Strong electrical engineering fundamentals in Analog, Power, and Digital Electronics., • Advanced experience with amplifiers, hybrid couplers, circulators, attenuators, mixers and waveguides., • Experience with microwave network design and optimization., • Experience in hardware production, quality verification, analyzing variability and determining tolerances., • Advanced experience comparing experimental measurement with simulated prediction of electromagnetic effects., • Strong experience with RF communication bands, modulations and protocols., • Hands-on experience with tuning, testing, troubleshooting, and integration with lab instruments such as: DMMs, Oscilloscopes, Vector Network Analyzers, and Spectrum Analyzers., • Software knowledge across C, C++, MATLAB/Octave, or Python., • Able to lift weights up to 50lbs (occasionally)., • DoD Security Clearance, or ability to obtain one, required., • Excellent problem-solving and analytical skills., • Excellent written and verbal communication skills., • Detail-oriented. Additional Preferred Skills: • Master of Science (MS) degree in Applied Physics, RF Engineering, or Electrical Engineering., • Experience designing integrated electronics, LNAs, mode forming networks, etc., • Experience working with optoelectronics., • Experience with military tactical radios and tactical protocols (Phantom, Saturn, Link-16, etc.), • Experience with RF analog, digital, and mixed-signal electronics., • Experience designing systems to meet compliance and certification requirements (e.g., CE/FCC)., • Experience with quantum sensing., • Proficiency in RF performance validation in anechoic chambers., • Experience with radars and radar cross section., • Solid background in signal processing, communication theory, and link analysis., • Experience in satellite communication and system considerations., • Experience with manual board prototyping/refurbing using essential equipment like soldering irons and hot air guns. Incumbent(s) in this position may be required to perform other duties and special assignments not specifically stated above. Statements outlined in this section are designated as essential job functions in accordance with the Americans with Disabilities Act of 1990.

Job Description Data Collection Specialist Company Overview Communication Technology Services (CTS) is one of the largest integrators and managed service providers in the U.S., specializing in the design, installation, and support of Distributed Antenna Systems (DAS), Small Cell, and 4G/5G Private Wireless Networks. We are driven by the desire to solve complex customer problems, the excitement of deploying new technologies, and our dedication to delivering advanced wireless solutions as simple, scalable offerings for our customers. We are seeking a Data Collections Specialist to support our National Team. This role is ideal for candidates who are flexible, hands-on, and eager to travel, as it requires up to 75% National Travel. Candidates may be based anywhere in the U.S., with all travel fully supported by CTS. Position Summary The is an entry-level or junior position within the CTS Engineering team, designed for individuals who are in the process of being trained to take on the full responsibilities of the role. This position will typically be paired with a System Performance Engineer to accelerate skill development through hands-on mentorship and field experience. On-site activities include benchmark data collection, post-deployment data collection, commissioning activity, and basic troubleshooting. There is a heavy emphasis on rapid learning and assessment of skills so that the individual can be sent to remote locations and trusted to complete a project independently. ESSENTIAL RESPONSIBILITIES Conduct benchmark walk data collections using SeeHawk Touch platform in accordance with CTS standards and project specifications Perform proof-of-product walk data collections using LML data collection platform for post-deployment validation Execute post-deployment data collection activities to verify system performance against design requirements Participate in commissioning processes alongside the National System Performance Engineering (SPE) team Perform basic troubleshooting of data collection platforms and field equipment in real-time during deployments Maintain and care for assigned LML and scanner kits in coordination with the reporting manager and equipment vendor Submit travel requests and timesheets accurately and on time in compliance with CTS administrative procedures Recognize and report anomalies in walk data KPIs, DAS alarms, and related performance indicators Support senior SPEs in commissioning activities including signal readings and RF measurements Travel to remote project sites independently as competency is demonstrated, completing data collection assignments without on-site supervision JOB REQUIREMENTS Education & Experience High school diploma or GED required; Associate’s degree in Electronics, Telecommunications, IT, or a related technical field preferred 0–2 years of experience in a technical or field-based role; prior internship or coursework in RF, wireless, or networking is a plus Valid driver’s license with a clean driving record and the ability to travel extensively (up to75% or more) Technical Skills Basic understanding of wireless communication concepts (cellular, Wi-Fi, RF signal propagation) or demonstrated aptitude to learn quickly Comfort with technology platforms, software tools, and data collection instruments;willingness to master SeeHawk Touch and LML platforms Familiarity with or ability to learn RF metrics including signal strength (RSRP), signal quality (RSRQ/SINR), and interference measurements Basic math proficiency with the ability to develop working knowledge of RF mathematics as applied to walk data and commissioning Ability to understand signal architecture concepts for LTE, NR (5G), and Public Safetysystems through structured training Professional Competencies Strong learning agility — must demonstrate the ability to rapidly absorb new technicalconcepts and apply them in the field under time pressure High degree of self-motivation and accountability; must be capable of working independently at remote sites after initial training period Detail-oriented with strong organizational skills; data collection requires precision andconsistent adherence to established workflows Effective communication skills for coordinating with SPE team members, project managers,and administrative staff Problem-solving mindset with the ability to troubleshoot equipment and software issues in the field without immediate on-site support Professional demeanor representing CTS at client sites; commitment to CTS values of respect, integrity, and excellence Physical & Work Environment Requirements Ability to walk, stand, and carry equipment (up to 30 lbs) for extended periods during walk data collections in various building environments Willingness to work in active construction sites, mechanical rooms, rooftops, and otherindustrial environments as required by project needs Flexibility to travel on short notice and work variable hours including occasional weekends based on project schedules Comfort working at heights and in confined spaces as dictated by in-building wireless infrastructure locations Willingness to perform telecom installation and QOI testing job duties if required.

Mechanical Engineering, Physics or a related field with a minimum of three (3) years of mechanical engineering experience, with a demonstrated record of successful contributions. Position Description The NSLS-II RF Group designs, fabricates, operates, and maintains multiple high power Radio Frequenc

Coordinate vendor selection activities, including RFP/RFQ processes, proposal evaluation, and contract scoping. Oversee CRO and vendor performance through governance meetings, action tracking, issue resolution, and performance monitoring. The position serves as an operational interface between inter

Our capabilities include programme, project, cost, asset and commercial management, controls and performance, procurement and supply chain, net zero and digital solutions. Support design, engineering and construction team through planning, design, preconstruction and construction activities. Oversee

You will collaborate closely with engineering, product, customer engineering, and site reliability teams to drive continuous improvement across the entire support lifecycle. Experience supporting or working alongside high-performance compute or AI/ML infrastructure environments. High-visibility role

You help protect project performance by proactively managing risks, dependencies, and scope shifts. Participate in performance assessments and apply feedback to strengthen leadership, coordination, and delivery discipline. These work environment characteristics represent the conditions encountered w

The position is also responsible for performing sales and service functions for targeted markets, programs and sales as assigned. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Performs the functions of a Customer Service Project Man

Lead annual budget planning and monitoring for complex, value‑based fee arrangements, ensuring real‑time visibility into financial performance.

Perform all responsibilities of a Customer Service Engineer as outlined in the quality management system. Bachelor’s or Associate's Degree in Electronic Engineering, Biomedical Engineering Technology, or other technical electronics discipline, military equivalent, or 2+ years related work experien

Identify and manage the project team/project managers and communicate project status and performance to executive leadership. Lead the preparation of civil engineering project proposals. Act as a team resource on complex engineering issues.

Maintain accurate and up-to-date account information within the CRM system, tracking engagement activities, customer health metrics, key performance indicators, and expansion pipeline. Ability to perform at both strategic and tactical levels.

Ranked among the nation's top A/E firms by Engineering News-Record, LiRo-Hill provides construction management, engineering, environmental, architectural, and program management solutions. Perform technical reviews and provide constructive feedback to ensure highquality deliverables. This role invol

You will partner with customer executives and technical leads while orchestrating internal alignment across Solutions Architects, Junior Technical Program Managers, Implementation Engineers, Product and Engineering Managers. Strategic Influence: Demonstrated ability to build strong cross-functional

LiRo-Hill is ranked among the nation's top A/E firms by Engineering News-Record, LiRo-Hill provides construction management, engineering, environmental, architectural, and program management solutions. Administer agreements, monitor contract performance, and review project schedules, payments,. Bach

Lead Client Services Project Manager.At NiCE, we don't limit our challenges.We set the highest standards and execute beyond them.And if you're like us, we can offer you the ultimate career opportunity that will light a fire within you.Project Manager, NiCE Actimize.The Project Manager (PM) in NICE A

Coordinate and work cross-functionally with internal departments (ie: Product, Sales, Engineering) to resolve client issues or requests.

Senior Client Service Project Manager.Toppan Merrill is a global technology leader committed to simplifying the complexity of regulatory disclosure and communications.We offer the most intuitive end-to-end SaaS platform for complex compliant content creation and enhancement of multi-stakeholder coll

Lead Client Services Project Manager, Actimize.At NiCE, we don't limit our challenges.We set the highest standards and execute beyond them.And if you're like us, we can offer you the ultimate career opportunity that will light a fire within you.Project Manager, NiCE Actimize.The Project Manager (PM)

RIVERSIDE BUILDERS OVERVIEW: We are seeking a highly organized and detail-oriented Construction Assistant to support our Service Manager in overseeing high-end residential concierge service, maintenance, and small-scale construction projects.This role blends office coordination with on-site involvem

Project Manager + Business Analyst.MUST in the capacity of a Project Manager + Business Analyst.Experience working on enterprise programs with a focus on finance and tax related topics.General Ledger (GL) reconciliation and related knowledge Accounting and Tax knowledge on IT projects is a MUST.Bank

Experience with Agile, Scrum, Waterfall, or hybrid project methodologies.

This position is also involves performing a wide range of tasks related to service development, including project implementations, supervisory function to support the Director/Manager, and designing solutions for both clients and Pasona internal. Perform other duties as assigned.

Requirements Basic Qualifications Bachelor's degree in Architecture, Engineering (Civil, Structural, Mechanical, Electrical), or Construction Management. Engineering degrees must be from ABET-accredited programs. Project Manager (Architect/Engineer) to lead small design and construction projects for

Lead and facilitate engineering design staff. Bachelor's Degree in Civil Engineering or related field. NJ Professional Engineering license.

This is a short-term contract, with opportunities for ongoing work for high performers.

Create and manage submittal schedules, coordinate reviews with the design team, lead submittal meetings, and ensure timely processing of RFIs. Serve as the primary point of contact for owners, architects, engineers, and consultants; lead OAC meetings and maintain proactive communication. Lead weekly

Manage project documentation, contracts, submittals, RFIs, change orders, and closeout requirements. Bachelor’s degree in Construction Management, Engineering, Architecture, or related field preferred. Competitive salary and performance-based incentives.

Provide technical leadership and conduct engineering/design quality reviews. Bachelor's degree in Civil Engineering, Landscape Architecture, or related field. So if you're excited about this role, but your past experience doesn't align perfectly with every qualification in the position description,

Competitive assemble the project team by preparing and administering Requests for Proposals (RFP's), make recommendations for award, and negotiate contracts as may be required by the client. Education and Experience - Bachelor's Degree in Architecture, Engineering, Construction Management, or relate

Plans, organizes and integrates cross-functional information technology projects that are significant in scope and impact.Lead and integrate cross-functional IT projects with significant scope and impact.Manage budgets, team tasks, goal setting, and team planning meetings.Oversee projects within the

We're seeking a proactive and detail-oriented Junior Project Manager to support the daily operations of our IT Program Management Office (PMO) and Change Management (CM) functions.This role plays a key part in maintaining process integrity, driving compliance, and promoting the value of PMO and CM a

Strong familiarity with email marketing platforms, especially Mailchimp.Location: New York, NY 10027 (Hybrid - 2 days on 3 remote - 9-5pm EST).Contract: 6 month contract (Need Locals).Customer Interview Process: Two video interview with eplus and One round with end client + team member- virtual inte

Lead coordination between clients, architects, engineers, consultants and subcontractors. Manage project documentation, RFIs, submittals and approvals. Monitor project costs and financial performance.