Trabajos rf engineer en New York, New YorkCrear alertas

All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, ve

Job DescriptionJob Title: RF Test Engineer Job Description Join our dynamic team as an RF Test Engineer, where you will be involved in the design, development, documentation, and production of RF and Microwave components for the telecommunications industry. This role requires expertise in both active and passive devices, ensuring high-quality testing and optimization of cutting-edge products. Responsibilities • Follow test procedures and complete comprehensive test reports for tested products., • Troubleshoot and optimize discrete Power Amplifier Modules and Low Noise Amplifiers (LNAs) during both prototype and production stages., • Define and construct test setups to measure VSWR, Gain, Group Delay, Phase Variation, IP3, P3dB compression points, Noise Figure, and Harmonics for narrow and broad band high power amplifiers., • Perform RF testing using Network Analyzers, Power Meters, Noise Figure Meters, and other testing equipment., • Define and construct test setups to measure VSWR, Insertion Loss, Group Delay, and Phase Variation for passive filtering products., • Test and optimize Distributed Antenna Systems (DAS) such as Bi-Directional and Tower Mounted amplifiers for public safety and carrier applications., • Read and understand electronic and mechanical blueprints., • Communicate technical information effectively internally and with clients., • Manage tasks and priorities efficiently while adapting to changes in production requirements., • Document new designs to ensure repeatability for future orders.Essential Skills, • 3-5 years of hands-on experience in testing and optimizing active/passive discrete RF components., • Proficiency in component level troubleshooting and testing., • Experience with testing equipment such as oscilloscopes, spectrum analyzers, network analyzers, and other laboratory test equipment., • Strong skills in board repair, electronics, and soldering., • Ability to read and understand schematics and engineering diagrams.Additional Skills & Qualifications, • Proficiency in English for reading and speaking., • Ability to work well both in a team and independently., • Excellent interpersonal and communication skills., • Ability to read and interpret documents such as safety rules and operating procedures., • Strong knowledge of Microsoft Office; AutoCAD is a plus.Work Environment This role involves working within the RF Test Technician team, reporting directly to the team lead. The environment is supportive and collaborative, with opportunities for growth as the company expands and introduces new products. You will use a variety of test equipment, including Network and Spectrum Analyzers, Power Meters, and Noise Figure Meters, in a well-equipped lab setting. Job Type & Location This is a Permanent position based out of Fair Lawn, NJ. Pay and Benefits The pay range for this position is $75000.00 - $95000.00/yr. working with client to get company benefits Workplace Type This is a fully onsite position in Fair Lawn,NJ. Application Deadline This position is anticipated to close on Dec 17, 2025. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email for other accommodation options.

Job DescriptionSenior Network EngineerEmployment Type: Full TimeDepartment: Information Technology CGS is seeking an experienced Senior Lead Network Engineer to join a team focused on the evaluation, enhancement, and maintenance of a large-scale network project that includes both wired and wireless network infrastructure and related hardware & software. The project's objectives are to evaluate the current setup of existing disparate networks and design & implement a network infrastructure that encompasses the wireless, wired, and software network requirements. The project will also include consultation regarding hardware and software necessary to facilitate the proper support for this encompassing infrastructure, and the associated systems testing, vulnerability assessments, and quality assurance needed to implement the new setup. This Network Engineer will interface with state and local governmental personnel, internal stakeholders, subject matter experts, and vendor(s) who will provide development services. CGS brings motivated, highly skilled, and creative people together to solve the government’s most dynamic problems with cutting-edge technology. To carry out our mission, we are seeking candidates who are excited to contribute to government innovation, appreciate collaboration, and can anticipate the needs of others. Here at CGS, we offer an environment in which our employees feel supported, and we encourage professional growth through various learning opportunities. Skills and attributes for success:- Operate and manage NPS network infrastructure;- Improve infrastructure monitoring and reporting capabilities based on the deployment of network management software;- Develop, maintain and deliver infrastructure documentation relating to the network infrastructure within the NPS environment;- Review current best practices and provide recommendations for architecture, design, management and operation of the network infrastructure;- Administration of the Cloudpath (or equivalent) onboarding process, monitoring and troubleshooting of wireless network health, maintenance of wireless network infrastructure, implementation of network security patches and software/firmware updates, from 0800 to 1700 PST, Monday-Friday;- Assess the NPS network infrastructure and make recommendations on improvement and optimization;- Define and conduct testing procedures for new infrastructure projects;- Implement technology solutions within the NPS network environment;- Provide design guidance on network solutions within NPS infrastructure projects;- Provide informal training and knowledge transfer to NPS resources on best practices and theory of operation relating to network products. Qualifications:- Bachelor’s Degree from an accredited college or university in Engineering, Computer Science, Business, Information systems or a related discipline.- Strong documentation skills including updating JIRA Tickets, Wiki Pages and Network Diagrams- Ability to communicate with end users, cross-organizational staff and technical assistance center.- CWNA Certification or equivalent- BCNE Certification or equivalent- Experience utilizing (RF) site survey tools such as Ekahau, RF Scanners and Wireshark packet capture software- Strong knowledge of layer 2 switching and layer 3 routing protocols; including VLANs, 802.1w, OSPF and VRRP- Strong knowledge of network security including; 802.1x, MAC Authentication, ACLs, RADIUS and Certificate of Authority (CA)- Strong knowledge of troubleshooting RF and LAN issues- Working knowledge of LINUX, MS Server 2013, VMware, etc.- A Master’s Degree in Engineering, Computer Science, Business, Information systems or a related discipline- At least 3 years experience with disaster recovery plan creation / implementation testing or projects - Experience with penetration testing, vulnerability assessment, and vulnerability testing- Experience with cyber threat information collection and analysis- Working knowledge of Agile/SCUM project management methodologies- Additional Industry certifications/licences Our Commitment:Contact Government Services (CGS) strives to simplify and enhance government bureaucracy through the optimization of human, technical, and financial resources. We combine cutting-edge technology with world-class personnel to deliver customized solutions that fit our client’s specific needs. We are committed to solving the most challenging and dynamic problems. For the past seven years, we’ve been growing our government-contracting portfolio, and along the way, we’ve created valuable partnerships by demonstrating a commitment to honesty, professionalism, and quality work.Here at CGS we value honesty through hard work and self-awareness, professionalism in all we do, and to deliver the best quality to our consumers mending those relations for years to come. We care about our employees. Therefore, we offer a comprehensive benefits package.- Health, Dental, and Vision- Life Insurance- 401k- Flexible Spending Account (Health, Dependent Care, and Commuter)- Paid Time Off and Observance of State/Federal Holidays Contact Government Services, LLC is an Equal Opportunity Employer. Applicants will be considered without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. Join our team and become part of government innovation!Explore additional job opportunities with CGS on our Job Board: more information about CGS please visit: or contact:Email: #CJ We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description RF Field Engineer Location: Clifton, NJ C Squared Systems, LLC is an RF engineering, consulting, and software development company specializing in providing services for seamless wireless coverage from RF analysis to design and implementation of DAS systems and Wi-Fi networks to remote monitoring and management of complex multi-vendor environments. Site Portal®, a customizable Web-based software, was engineered by C Squared Systems to remotely monitor and manage these complex multi-vendor environments. Since 1999, C Squared Systems has executed turnkey in-building wireless solutions using state-of-the-art analysis tools to deliver RF solutions that exceed project scope and customer expectations. Our experience, technical expertise, and diverse projects in the wireless realm have allowed C Squared Systems to continually evolve as new technologies are developed and the demands of our customers change. C2 Systems is currently seeking a Radio Frequency (RF)/Field Engineer to join our team. If you are highly motivated and have the ability to work in a fast paced environment, this may be the role for you. You will be interacting with customers and co-workers on a daily basis and providing timely and detailed updates. This position will require you to be in the field 90% of the time. Primary Responsibilities: • Takes the lead on system commissioning, integrations, and activations, • Performs system tests using scanners, spectrum analyzers, transmitters, and other electronic test equipment, • Performs site surveys and in-depth walkthroughs, • Works (hands on) with system components such as antennas, fiber optics, coax, and RF amplifiers, • Troubleshoots and repairs systems for optimal performance, • Application of RF principles/theory (signal path, power, frequency, noise, modulations, etc.), • Multi-tasks on projects on a day-to-day basis, • Maintains test equipment and tools for continuous use, • Travels to various job sites within Maryland and outlying regions (DC, Northern Virginia, Pennsylvania and Delaware) Skills/Qualifications: • 2 year college degree (preferably technical) with relevant coursework, • 2+ years of related experience preferred (previous experience with DAS architecture and other cellular systems), • Knowledge of various wireless technologies (CDMA, WCDMA, GSM, LTE, etc.), • Possess strong technical aptitude and the desire to learn and advance within a technical field, • Comfortable working in high pressure situations, • Ability to receive and give direction on an as needed basis, • Knowledge of RF optimization techniques and best practices, • Proficient in basic computer applications (MS Office, etc.), • Must have a valid driver’s license with reliable transportation In addition, you should have the following characteristics: • Self-motivated and have the ability to work effectively under minimal supervision and direction, • Ability to work in groups, • Passion for learning new technologies, • Ability to work in a fast-paced environment, • Strong written and verbal English communication skills

Job Description Job Title: Optical Engineer & Color Scientist Location: Port Washington, NY Position Summary: The Optical Engineer will lead end-to-end optical system design, LED Selection and color science development for advanced LED lighting products across downlighting, projection, track, and linear platforms. This role combines deep expertise in photometric analysis, spectral modeling, LED package characterization, optical simulation, and standards compliance. The ideal candidate will be highly skilled in designing optical architectures for COB and discrete LED engines, optimizing beam performance, color quality, efficacy, and ensuring compliance with emerging Dark Sky, WELL standards and other sustainability standards. This position collaborates closely with product management, mechanical engineering, electrical engineering, and manufacturing teams to deliver world-class optical and color-rendering performance. Key Responsibilities: Optical Design & Engineering • Lead the design and development of complete optical systems for COB, discrete LED, and multi-source architectures., • Create optical solutions for downlights, projectors, wall washers, track heads, and linear systems using reflectors, TIR lenses, hybrid optics, mixing chambers, and light guides., • Perform optical simulations and ray-tracing (e.g., LightTools, TracePro, Zemax, SPEOS) to optimize beam quality, output, UGR, and efficiency., • Develop beam distributions including spot, narrow, medium, wide, oval, asymmetric, wall-wash, and custom profiles., • Evaluate and specify secondary optics from global suppliers; interpret intensity distribution, candela plots, IES files, and lens datasheets.LED Selection, Color Science & Photometry, • Conduct in-depth analysis of LED specification and color science including spectral power distribution (SPD), wavelength curves, CCT, CRI/TM-30, Duv, gamut, R9/Rf/Rg, and full binning structures., • Evaluate and compare LED packages from major suppliers (e.g., Cree, Nichia, Citizen, Lumileds, Samsung, Seoul, Luminus, Bridgelux)., • Interpret LED manufacturer data including LM-80, IS, TM-21/TM-28, TM-30, thermal derating, voltage/current curves, and optical efficiency., • Develop color mixing strategies for tunable white and RGB/RGBW systems including chromaticity stability, thermal droop compensation, and spectral optimization., • Optimize color mixing strategies with optical designs for various products., • Support calibration, tolerance analysis, and performance modeling for optical and chromatic uniformity.Standards Compliance & Sustainability, • Ensure optical and color performance meets or exceeds industry standards including:, • LM-80, LM-79, TM-21, TM-30, TM-20, • Zhaga, ANSI, IES, UL/ETL, cUL, CCC, TISI, etc., • WELL Building standards, Dark Sky / IDA compliance, Turtle Friendly applications (uplight control, CCT limits, spectral considerations), • Apply eco-design principles related to efficacy, energy use, material choices, and emerging sustainability requirements.Optical Prototyping, Testing & Validation, • Lead photometric validation, lab testing, and prototype evaluation to verify distribution, color consistency, and system efficacy., • Working with the test team in our China factory, interpret data from goniophotometers, integrating spheres, and spectrometers., • Support thermal-optical trade-off analysis and long-term lumen maintenance modeling.Cross-Functional Collaboration, • Working closely with multiple development teams, Global R&D (primary function), Functional R&D, Modern Forms R&D, Schonbek R&D, to support incoming projects, support and recommendations, evaluations and feedback etc., • Work closely with product managers to convert market/architectural needs into optical requirements., • Partner with mechanical engineers to integrate optics into housings, heatsinks, trims, and glare-control systems., • Provide technical guidance to NPI, quality, and manufacturing teams for LED selection, optics sourcing, and supplier qualification., • Support a multi-year global product roadmap aligned with commercial growth objectives., • Support high-quality product specifications, business cases, and PRDs (Product Requirement Documents)., • Support comprehensive competitive analysis, positioning frameworks, and training deliverables., • Regular performance analysis and competitive comparisons of WAC Products optics & fixture performance vs the market, • Develop new products that meet leading sustainability and material transparency standards, including RED List compliance, DECLARE certification, and WELL Building Standards., • Support and maintain a robust system to track material composition, supplier data, and documentation required for Environmental Product Declarations (EPDs)., • Integrate eco-design principles into the product development process to reduce environmental impact, improve material efficiency, and support circularity., • Support product documentation, transparency data, and sustainability attributes are readily available to meet growing specifier and regulatory requirements., • Drive adoption of sustainability-focused product features that increase market competitiveness and support environmentally driven project specifications. Requirements: Education • Bachelor’s degree in Engineering, Industrial Design, Architecture, Business, or related field required., • Master’s or PHD degree (Optical Engineering, Physics, Color Science, Photonics, or related field) preferred but not required.Technical Expertise, • 5–10+ years of optical engineering experience in the LED lighting industry., • Strong proficiency in optical simulation tools (Zemax, LightTools, TracePro, OpticStudio, etc.)., • Demonstrated experience designing optics for:, • COB LED systems, • Discrete LED arrays / boards, • Downlights, projectors, linear, wall wash, accent lighting, • Deep knowledge of LED color science, SPD analysis, binning, and photometric evaluation., • Strong understanding of optical materials, TIR lenses, reflectors, micro-optics, diffusers, and color-mixing chambers., • Able to read and interpret spectral graphs, candela plots, IES files, LED datasheets, and thermal-electrical curves.Industry & Standards Knowledge, • Familiarity with major LED suppliers and their product ecosystems., • Comprehensive knowledge of LM-80, LM-79, TM-21, TM-30, TM-20, ANSI C78.377, WELL, IDA/“Dark Sky,” and related industry protocols., • Experience with performance modeling of efficacy, CCT/CRI stability, and thermal behavior., • Experience in tunable white, human-centric lighting, UV/IR LEDs, or narrow-band LED design., • Familiarity with goniophotometer software, integrating sphere systems, and hands-on optical prototyping., • Knowledge of environmental product declarations (EPDs), eco-design standards, and green-building frameworks.Professional Skills, • Strong analytical, experimental, and problem-solving abilities., • Excellent communication and documentation skills; able to translate complex optical science for cross-functional teams., • Ability to manage multiple projects, meet deadlines, and support rapid development cycles., • Comfortable working with global teams and vendors.Travel Requirements, • If not located at NY HQ, travel at least 6x per year to HQ for team meetings., • International travel 30–40%, primarily to our factories in China and Thailand., • Additional travel to global trade shows (Lightapalooza, LEDucation, Light & Building), industry conferences (IALD), customer sites, and Company Launch Events. We recognize people as our most valuable asset. Our competitive salary and benefits package includes: paid time off; medical & dental coverage (including family coverage), vision, life, 401(k); tuition assistance; and continuous training and development. For immediate consideration, please apply as directed. Given the high volume of responses, only qualified candidates will be contacted. WAC is an equal opportunity employer and provides equal employment opportunities to all employees and applicants for employment without regard to race, color, religion, sex, gender, gender identity, sexual orientation, national origin, age, disability, genetics, or any other protected characteristic. In addition to federal law requirements, WAC complies with applicable state and local laws governing non-discrimination in employment in all of its locations. This policy applies to all terms and conditions of employment, including, but not limited to, recruiting, hiring, placement, promotion, termination, recall, transfer, leaves of absence, compensation, and training. Please note, all responsibilities outlined in the above job description are subject to change as needed. All efforts will be made to ensure proper notice is given for changes in responsibilities. Monday through Friday, 8am - 5pm Monday through Friday, 8am - 5pm

Job Description Public Safety RF Engineer Location: Clifton NJ Description C Squared Systems, LLC is an RF engineering, consulting, and software development company specializing in providing services for seamless wireless coverage from RF analysis to design and implementation of DAS systems and Wi-Fi networks to remote monitoring and management of complex multi-vendor environments. Site Portal®, a customizable Web-based software, was engineered by C Squared Systems to remotely monitor and manage these complex multi-vendor environments. Since 1999, C Squared Systems has executed turnkey in-building wireless solutions using state-of-the-art analysis tools to deliver RF solutions that exceed project scope and customer expectations. Our experience, technical expertise, and diverse projects in the wireless realm have allowed C Squared Systems to continually evolve as new technologies are developed and the demands of our customers change. C Squared Systems is currently seeking a Public Safety RF Engineer responsible for public safety system engineering functions relating to RF/Wireless communications pertaining to In-Building and outdoor, passive and active (Distributed Antenna System) systems. The incumbent will work hand in hand with senior public safety RF engineers in various aspects of DAS design, installation, commissioning, testing, troubleshooting and remote monitoring. The incumbent will also perform various operational support functions such as parts procurement, equipment repair/return, inventory, and documentation. Domestic travel will be expected approximately 25-50% of the time, with the majority of that being within the Greater New York area, but does include other markets as needed. Primary Responsibilities: • Design of Radio Frequency (RF) wireless communication systems and technology, • Experience working with large county or statewide P-25T, P-25C, and analog systems, • Develop Request for Information (RFIs) and Requests for Proposals (RFPs) evaluate solutions, manage implementations, and perform Independent Verification & Validation, • Coordinating with AHJ’s, FCC License holders, Carriers, End Users, Facility Managers, and Equipment Vendors, • Supporting the efforts of our technicians and engineers and directly supporting customers, • Ensuring customer satisfaction, • Work hands on with system components such as antennas, fiber optics, coax, and RF amplifiers and receivers, • Radio Frequency Exposure Studies, Intermodulation and Interference Analysis, • Multi-task projects on a day-to-day basis, • Travel to various job sites within Greater New York and other markets., • Strong background in public safety wireless communications, • Experience working with large county or statewide P-25T, P-25C, and analog systems, • Experience with RF Coverage modeling, RF design, and optimization, • Experience with LMR site equipment configuration and test, • Experience in land mobile radio, project management skills, knowledge of database reporting tools., • Familiarity with Public Safety organization operations, • Knowledge of other wireless technologies such as TETRA, GSM, UMTS, CDMA, WiFi, LTE and embedded systems, • Knowledge of microwave, circuit based, and fiber backhaul., • Knowledge of IP-based dispatch consoles and voice recorders, • Professional level certification in Wireless Communications (e.g., ETA, CWNA, Microsoft Wireless Communications Engineering Technologies, GROL Certification), • Experience or familiarity with radio frequency devices and/or systems is highly desirable., • Experience troubleshooting public safety DAS systems including ADRF, Comba, Zinwave, etc., • Familiar with the basics of IP Networking, • Multifaceted Professional capable interfacing with customers, • Proficient in basic computer applications (MS Outlook, MS Word, MS Excel, etc.), • Ability to learn quickly and understand technical materials, • Ability to shift gears quickly as priorities change, • A solid understanding of fundamental engineering principles and the ability to effectively work on multiple engineering projects simultaneously, • Requires knowledge of radio frequency and fiber optic communication technology, • Must be able to work effectively within a diverse work force including engineers, project managers, skilled craft workers, consultants, customers, and regulatory agency personnel, • Must have strong interpersonal and communications skills to be able to effectively communicate complex issues with peers, supervisors, and managers. Must be authorized to work in the US, be willing to travel up to 50%, have a clean driving record and be able to pass a company background check., • A minimum of a bachelor’s degree, preferably in electrical engineering or similar discipline with at least 5 years Land Mobile Radio (LMR) engineering experience. Master’s degree preferred. An equivalent combination of advanced education, training, and experience will be considered.

Job DescriptionNetwork EngineerEmployment Type: Full Time, Experienced levelDepartment: Information Technology CGS is seeking an experienced Network Engineer to join a team focused on the evaluation, enhancement, and maintenance of a large scale network project that includes both wired and wireless network infrastructure and related hardware & software. The project's objectives are to evaluate the current setup of existing disparate networks and design & implement a network infrastructure that encompasses the wireless, wired, and software network requirements. The project will also include consultation regarding hardware and software necessary to facilitate the proper support for this encompassing infrastructure, and the associated systems testing, vulnerability assessments, and quality assurance needed to implement the new setup. This Network Engineer will interface with state and local governmental personnel, internal stakeholders, subject matter experts, and vendor(s) who will provide development services. CGS brings motivated, highly skilled, and creative people together to solve government’s most dynamic problems with cutting edge technology. To carry out our mission, we are seeking candidates that are excited to contribute to government innovation, appreciate collaboration, and can anticipate the needs of others. Here at CGS, we offer an environment in which our employees feel supported, and we encourage professional growth through various learning opportunities. Skills and attributes for success:- Operate and manage NPS network infrastructure;- Improve infrastructure monitoring and reporting capabilities based on the deployment of network management software;- Develop, maintain and deliver infrastructure documentation relating to the network infrastructure within the NPS environment;- Review current best practices and provide recommendations for architecture, design, management and operation of the network infrastructure;- Administration of the Cloudpath (or equivalent) onboarding process, monitoring and troubleshooting of wireless network health, maintenance of wireless network infrastructure, implementation of network security patches and software/firmware updates, from 0800 to 1700 PST, Monday-Friday;- Assess the NPS network infrastructure and make recommendations on improvement and optimization;- Define and conduct testing procedures for new infrastructure projects;- Implement technology solutions within the NPS network environment;- Provide design guidance on network solutions within NPS infrastructure projects;- Provide informal training and knowledge transfer to NPS resources on best practices and theory of operation relating to network products. Qualifications:- Bachelor’s Degree from an accredited college or university in Engineering, Computer Science, Business, Information systems or a related discipline.- Strong documentation skills including updating JIRA Tickets, Wiki Pages and Network Diagrams- Ability to communicate with end users, cross-organizational staff and technical assistance center.- CWNA Certification or equivalent- BCNE Certification or equivalent- Experience utilizing (RF) site survey tools such as Ekahau, RF Scanners and Wireshark packet capture software- Strong knowledge of layer 2 switching and layer 3 routing protocols; including VLANs, 802.1w, OSPF and VRRP- Strong knowledge of network security including; 802.1x, MAC Authentication, ACLs, RADIUS and Certificate of Authority (CA)- Strong knowledge of troubleshooting RF and LAN issues- Working knowledge of LINUX, MS Server 2013, VMware, etc.- A Master’s Degree in Engineering, Computer Science, Business, Information systems or a related discipline- At least 3 years experience with disaster recovery plan creation / implementation testing or projects - Experience with penetration testing, vulnerability assessment, and vulnerability testing- Experience with cyber threat information collection and analysis- Working knowledge of Agile/SCUM project management methodologies- Additional Industry certifications/licences Our commitmentContact Government Services (CGS) strives to simplify and enhance government bureaucracy through the optimization of human, technical, and financial resources. We combine cutting edge technology with world-class personnel to deliver customized solutions that fit our clients’ specific needs. We are committed to solving the most challenging and dynamic problems. For the past seven years we’ve been growing our government-contracting portfolio, and along the way we’ve created valuable partnerships by demonstrating a commitment to honesty, professionalism, and quality work. Here at CGS we value honesty through hard work and self-awareness, professionalism in all we do, and to deliver the best quality to our consumers mending those relations for years to come. We care about our employees. Therefore, we offer a comprehensive benefits package:- Health, Dental, and Vision- Life Insurance- 401k- Flexible Spending Account (Health, Dependent Care, and Commuter)- Paid Time Off and Observance of State/Federal Holidays Contact Government Services, LLC is an Equal Opportunity Employer. Applicants will be considered without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran Join our team and become part of meaningful government innovation! Explore additional job opportunities with CGS on our Job Board: For more information about CGS please visit: or contact:Email: #CJ We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job DescriptionSenior Lead Network Engineer IIEmployment Type: Full TimeDepartment: Information Technology CGS is seeking an experienced Senior Lead Network Engineer to join a team focused on the evaluation, enhancement, and maintenance of a large-scale network project that includes both wired and wireless network infrastructure and related hardware & software. The project's objectives are to evaluate the current setup of existing disparate networks and design & implement a network infrastructure that encompasses the wireless, wired, and software network requirements. The project will also include consultation regarding hardware and software necessary to facilitate the proper support for this encompassing infrastructure, and the associated systems testing, vulnerability assessments, and quality assurance needed to implement the new setup. This Network Engineer will interface with state and local governmental personnel, internal stakeholders, subject matter experts, and vendor(s) who will provide development services. CGS brings motivated, highly skilled, and creative people together to solve the government’s most dynamic problems with cutting-edge technology. To carry out our mission, we are seeking candidates who are excited to contribute to government innovation, appreciate collaboration, and can anticipate the needs of others. Here at CGS, we offer an environment in which our employees feel supported, and we encourage professional growth through various learning opportunities. Skills and attributes for success:- Operate and manage NPS network infrastructure;- Improve infrastructure monitoring and reporting capabilities based on the deployment of network management software;- Develop, maintain and deliver infrastructure documentation relating to the network infrastructure within the NPS environment;- Review current best practices and provide recommendations for architecture, design, management and operation of the network infrastructure;- Administration of the Cloudpath (or equivalent) onboarding process, monitoring and troubleshooting of wireless network health, maintenance of wireless network infrastructure, implementation of network security patches and software/firmware updates, from 0800 to 1700 PST, Monday-Friday;- Assess the NPS network infrastructure and make recommendations on improvement and optimization;- Define and conduct testing procedures for new infrastructure projects;- Implement technology solutions within the NPS network environment;- Provide design guidance on network solutions within NPS infrastructure projects;- Provide informal training and knowledge transfer to NPS resources on best practices and theory of operation relating to network products. Qualifications:- Bachelor’s Degree from an accredited college or university in Engineering, Computer Science, Business, Information systems or a related discipline.- Strong documentation skills including updating JIRA Tickets, Wiki Pages and Network Diagrams- Ability to communicate with end users, cross-organizational staff and technical assistance center.- CWNA Certification or equivalent- BCNE Certification or equivalent- Experience utilizing (RF) site survey tools such as Ekahau, RF Scanners and Wireshark packet capture software- Strong knowledge of layer 2 switching and layer 3 routing protocols; including VLANs, 802.1w, OSPF and VRRP- Strong knowledge of network security including; 802.1x, MAC Authentication, ACLs, RADIUS and Certificate of Authority (CA)- Strong knowledge of troubleshooting RF and LAN issues- Working knowledge of LINUX, MS Server 2013, VMware, etc.- A Master’s Degree in Engineering, Computer Science, Business, Information systems or a related discipline- At least 3 years experience with disaster recovery plan creation / implementation testing or projects - Experience with penetration testing, vulnerability assessment, and vulnerability testing- Experience with cyber threat information collection and analysis- Working knowledge of Agile/SCUM project management methodologies- Additional Industry certifications/licences Our Commitment:Contact Government Services (CGS) strives to simplify and enhance government bureaucracy through the optimization of human, technical, and financial resources. We combine cutting-edge technology with world-class personnel to deliver customized solutions that fit our client’s specific needs. We are committed to solving the most challenging and dynamic problems. For the past seven years, we’ve been growing our government-contracting portfolio, and along the way, we’ve created valuable partnerships by demonstrating a commitment to honesty, professionalism, and quality work.Here at CGS we value honesty through hard work and self-awareness, professionalism in all we do, and to deliver the best quality to our consumers mending those relations for years to come. We care about our employees. Therefore, we offer a comprehensive benefits package.- Health, Dental, and Vision- Life Insurance- 401k- Flexible Spending Account (Health, Dependent Care, and Commuter)- Paid Time Off and Observance of State/Federal Holidays Contact Government Services, LLC is an Equal Opportunity Employer. Applicants will be considered without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. Join our team and become part of government innovation!Explore additional job opportunities with CGS on our Job Board: more information about CGS please visit: or contact:Email: #CJ We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job DescriptionWelcome to Fi. We’re a passionate team from Square, Google, TikTok, Peloton, Uber, and more working to transform the human-pet relationship. Our mission? Develop cutting-edge technology to revolutionize what it means to be a pet parent. The pet industry remains firmly stuck in the past and we are here to change that. Fi is leveraging our team's talent and expertise to improve the lives of millions of pets in the U.S. Real-time location tracking, activity, sleep and behavior monitoring – and that's just the beginning. The most exciting aspect of our work? Bridging the communication gap between pets and humans. Imagine a world where everyone knows how their pet feels in real time and how to keep their best friend in good shape. That's the future we're building at Fi. If you're someone who thrives in innovative, collaborative work environments and feels strongly about helping pets live longer, better lives, Fi could be the perfect fit. Join us in our pursuit of the “impossible,” or as we call it here “let me find a way,” to redefine the future of pet ownership together. Fi is looking for a Staff Electrical Engineer! Do you dream of designing hardware that solves real-world problems and improves lives—both human and pets? As our Staff Electrical Engineer, you’ll lead the charge in designing and building the electronics that power Fi’s groundbreaking products. This is your chance to push the boundaries of innovation, tackle complex technical challenges, and make an impact at a fast-growing hardware startup.What You’ll Do: • Lead the design: Own the end-to-end electronics design for Fi products, from proof-of-concept to mass production., • Innovate and optimize: Contribute to system architecture, schematic capture, PCB layout, and component selection to ensure performance, reliability, and manufacturability., • A seat at the table: Work closely with leadership, firmware, mechanical, and overseas engineering teams to drive board bring-up, validation, and safety testing, ensuring seamless integration and reliability., • Push boundaries: Optimize system architecture and power management strategies for ultra-low-power performance—because every microamp matters., • Scale production: Work closely with overseas CM/JDM partners to drive efficient design, testing, and manufacturing processes.What You'll Bring:, • Experience: 8+ years in high-volume consumer electronics design., • Education: Bachelor’s or Master’s degree in Electrical Engineering, Computer Engineering, or a related field., • Expertise in circuit design: Low-power systems, lithium-ion battery-powered devices, RF systems (Wi-Fi, LTE, GNSS, and antenna design), sensing technologies, and digital communication buses., • Technical skills: Proficiency in schematic capture and PCB layout (Altium preferred), advanced lab skills with tools like DMMs, oscilloscopes, spectrum analyzers, and logic analyzers, and the ability to solder SMD components down to 0201 level under a microscope., • Collaborative mindset: Strong communication skills and experience working with technical and non-technical teams across multiple countries., • Firmware understanding: Familiarity with firmware concepts and experience with C or Python for embedded systems testing and debugging., • Track record: Proven experience leading the electronics design lifecycle from prototype through to mass production., • Flexibility: Willingness to travel to China as needed., • Animal lover: A passion for animals is a plus—our NYC office is pet-friendly!Why You’ll Love Us:, • Time to Recharge: Enjoy flexible PTO to take the breaks you need., • Top-Notch Health Coverage: We’ve got your back (and teeth and eyes) with full medical, dental, and vision insurance., • Wellness Perks: Free access to One Medical, Kindbody, and Talkspace to keep you feeling your best., • Give Back to the Pups: Make tails wag with a $500 annual donation to a dog charity of your choice through our BarkBack Program., • Free Fi Membership: Your furry best friend(s) get all the benefits of a Fi collar, on us!, • Love for Friends + Family: Share the Fi magic with loved ones through our gifting program.The anticipated base salary range for this position is $150,00–$225,000. Actual compensation will vary based on multiple factors, including skills, experience, market conditions, and role scope, which may evolve during the hiring process. As a fast-growing Series B startup, Fi evaluates compensation opportunistically to align with the right candidate. This role is also eligible for equity compensation.Fi is an equal opportunity employer that is committed to diversity and inclusion in the workplace. We prohibit discrimination and harassment of any kind based on race, color, sex, religion, sexual orientation, national origin, disability, genetic information, pregnancy, or any other protected characteristic as outlined by federal, state, or local laws. This policy applies to all employment practices within our organization, including hiring, promotion, termination, layoff, recall, leave of absence, compensation, benefits, training, and apprenticeship. Fi makes hiring decisions based solely on qualifications, merit, and our needs at the time.

Skills and Experience: Required Qualifications: Bachelor’s degree in Electrical Engineering, RF Engineering, or related field (Master’s or PhD preferred). Evaluate antenna integration into host platforms for mechanical, thermal, and electrical compatibility.

Job DescriptionDescriptionThe Applications Engineer is responsible for the support of the sales, marketing and manufacturing of ceramic capacitor products serving all target markets. The person acts as technical liaison to customers and will also heavily interact with internal production personal as well as external vendors. An intimate knowledge of processes, capabilities and MIL Standards is essential. Key Responsibilities • Field customer technical questions., • Interact with customers to define custom part requirements and evaluate feasibility., • Ensure all customer drawings are up to date., • Participate in the ECN process., • Work with engineering team to define testing and evaluation where required., • Works with Product Managers to design and develop new products., • Coordinate with Sales to fully understand their requirements and applications., • International travel and training for new products/processes may be required., • Work with the Quality department to address quality issues., • Maintain catalogue, datasheet and website technical content., • BS degree preferably in Electrical Engineering discipline., • 3-5 years’ work experience in a technical role with customer interaction., • Experience with capacitive and or RF products/applications., • Self-directed, highly professional and collaborative., • Strong verbal and written communication skills., • Strong attention to detail and propensity for accuracy of work product., • Accountability to the timelines of task completion., • Able to manage multiple tasks and priorities within a fast-paced workplace., • Medical, dental and vision insurance plans, • Prescription Drug Plans, • Basic Life Insurance, • 401k plan with company match, • Tuition Reimbursement Program, • Security Clearance Incentive Program, • Employee Referral Program, • Overtime opportunities, • Flexible Paid Time Off ITAR Statement: Please note that this position may require access to technical data controlled under the International Traffic in Arms Regulations (ITAR) or Export Administration Regulations (EAR). Applicants must be U.S. persons (citizens, lawful permanent residents, or individuals granted refugee or asylee status) or have the necessary authorization to access controlled technical data. Compliance with ITAR and EAR regulations is a condition of employment. Notice to Staffing Agencies, Search Firms and Recruitment Agencies: The recruitment process at Knowles is managed through the Human Resources department. Knowles does not accept resumes submitted from 3rd party agencies outside of our system. To submit resumes, 3rd party agencies will need to be a pre-approved vendor with a valid contract in place, be actively engaged by Knowles to recruit for a specific position and have agency log in credentials to submit candidates to our careers portal. Please do not submit resumes via e-mail, through our external website or directly to our employees. Any resumes submitted in this way become the property of Knowles and will not be eligible for any placement fee.

A global technology company is seeking a Reliability Engineer in New York to conduct reliability studies and coordinate qualification of new products. Key responsibilities include designing and executing qualification tests and collaborating with engineering teams to ensure product reliability. The

A wireless engineering firm is seeking a Senior RF Engineer/VoNR Optimization Engineer in New York to lead performance analysis and optimization. Responsibilities include benchmarking major carriers and analyzing VoNR performance through drive testing. Candidates should have 3-7 years of RF engineer

Position Summary The Development Test Engineer I is responsible for performing electrical tests of RF components, verifying the test data, and preparing test reports. Qualifications * BS Electrical Engineering or related field of study * Knowledge of engineering testing procedures and processes. Mi

A leading RF components manufacturer in New York seeks an Engineering professional to design and scale automated production test systems for RF and Microwave components.