Trabajos rf engineer en Atlanta, GeorgiaCrear alertas

Description Leidos’ NISC IV program seeks an Electrical Engineer/Radio Frequency (RF) Engineer to support the Federal Aviation Administration (FAA) Spectrum Engineering Services Group in Seattle, Denver, or Salt Lake City. The Spectrum Engineering Group is responsible for securing, managing, and protecting all civil aviation spectrum resources to ensure interference-free operation of FAA communications, navigation, and surveillance (CNS) systems across the National Airspace System (NAS). The ideal candidate will have an electrical engineering degree and with at least 4 years of experience in Radio Frequency Spectrum Analysis, interference mitigation, radio direction finding, and field investigations using industry-standard text equipment. The engineer will conduct interference analysis using databases, logs, and historical patterns and conduct on-site investigations as needed. The engineer will work closely with regulatory bodies, engineering teams, and project managers to support spectrum-related initiatives across various projects to ensure mission-critical systems remain compliant and interference-free. In-office Up to 50% travel Primary Responsibilities • Monitor and receive reports of radio frequency interference affecting the National Air Space (NAS) operations., • Evaluate the urgency and impact of incoming RFI reports to prioritize responses., • Conduct both remote and on-site Radio Frequency Interference (RFI) investigations using historical data, databases, logs, and RF analysis tools., • Conduct RFI field investigation using equipment such as spectrum analyzers, direction finders, and portable antennas to pinpoint the sources of interference when a physical search is warranted., • Interpret technical data and apply mitigation best practices to resolve radio frequency interference issues with minimal disruption to the National Air Space (NAS) operations., • Coordinate and communicate with system users, engineering leads, and regional frequency managers., • Prepare comprehensive reports summarizing the interference issues, investigative methods used, findings, and resolutions implemented for review by senior management and other stakeholders as required., • Travel required for conducting on-site RFI investigations and analysis within any state within the Western Service Area. Required Qualifications • Bachelor’s degree (preferred in in electrical engineering) or an equivalent technical field or military training., • 4+ years of prior relevant experience in radio frequency (RF) engineering., • Proficient in the use of Microsoft Office (Word, Excel, PowerPoint)., • Ability to learn FAA-specific software and systems., • Active security clearance or ability to obtain one if required., • Must be a US citizen. Preferred Qualifications • Experience with Spectrum Analyzers and Direction Finding (DF) equipment., • Exposure to RF modeling, frequency assignment tools, or engineering databases., • Experience with aeronautical maps and chart plotting., • Ability to interpret technical data and apply mitigation best practices to resolve RF interference issues affecting aviation systems., • Ability to perform Free-Space Path Loss (FSPL) calculations, Link Budgets, dBW/dBm/Watt conversions., • Knowledge of roles and responsibilities of spectrum management within the National Airspace System (NAS)., • Knowledge of frequency management practices, including engineering, assignment, and protection of radio frequencies, and the National Telecommunication and Information Administration (NTIA) Redbook., • Knowledge of and experience with various frequency policy organizations, including National Telecommunications and Information Administration (NTIA), Interdepartmental Radio Advisory Committee (IRAC), and associated sub-committees, and the Federal Communications Commission (FCC). If you're looking for comfort, keep scrolling. At Leidos, we outthink, outbuild, and outpace the status quo — because the mission demands it. We're not hiring followers. We're recruiting the ones who disrupt, provoke, and refuse to fail. Step 10 is ancient history. We're already at step 30 — and moving faster than anyone else dares. July 23, 2026 For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above. Pay Range $87,100.00 - $157,450.00 The Leidos pay range for this job level is a general guideline only and not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law. About Leidos Leidos is an industry and technology leader serving government and commercial customers with smarter, more efficient digital and mission innovations. Headquartered in Reston, Virginia, with 47,000 global employees, Leidos reported annual revenues of approximately $16.7 billion for the fiscal year ended January 3, 2025. For more information, visit _. Pay and Benefits Pay and benefits are fundamental to any career decision. That's why we craft compensation packages that reflect the importance of the work we do for our customers. Employment benefits include competitive compensation, Health and Wellness programs, Income Protection, Paid Leave and Retirement. More details are available at _. Securing Your Data Beware of fake employment opportunities using Leidos’ name. Leidos will never ask you to provide payment-related information during any part of the employment application process (i.e., ask you for money), nor will Leidos ever advance money as part of the hiring process (i.e., send you a check or money order before doing any work). Further, Leidos will only communicate with you through emails that are generated by the Leidos.com automated system – never from free commercial services (e.g., Gmail, Yahoo, Hotmail) or via WhatsApp, Telegram, etc. If you received an email purporting to be from Leidos that asks for payment-related information or any other personal information (e.g., about you or your previous employer), and you are concerned about its legitimacy, please make us aware immediately by emailing us at _. If you believe you are the victim of a scam, contact your local law enforcement and report the incident to the _. Commitment to Non-Discrimination All qualified applicants will receive consideration for employment without regard to sex, race, ethnicity, age, national origin, citizenship, religion, physical or mental disability, medical condition, genetic information, pregnancy, family structure, marital status, ancestry, domestic partner status, sexual orientation, gender identity or expression, veteran or military status, or any other basis prohibited by law. Leidos will also consider for employment qualified applicants with criminal histories consistent with relevant laws.

Electrical Engineer \n \n PYRRHUS is looking for an Electrical Engineer to own PCB design for our innovative weapon-mounted remote control system, from schematic capture through fabrication, assembly, and test. You'll design both analog and digital circuits and get hands-on with bring-up and debugging on the bench. You'll work alongside other engineers on the team throughout the process, from firmware and mechanical to RF layout support and testing. \n \n What You'll Do \n\n • Own the PCB layouts\n, • Design analog and digital circuits for sensors, payload electronics, and communication modules\n, • Design for manufacturability (DFM) and design for assembly (DFA) to support production-scale builds\n, • May work with PCB fabrication and contract assembly vendors - quoting, DFM reviews, issue resolution\n, • Develop and run test procedures for board bring-up and validation\n, • Select and integrate RF communication components; work with modulation/encoding schemes (e.g., FSK, LoRa)\n, • Build, rework, and debug prototypes yourself - soldering, rework, bench instrumentation (scope, multimeter, spectrum analyzer)\n, • Collaborate with firmware and mechanical engineering on system-level integration\n\n \n Required Qualifications \n\n • 5+ years of experience designing PCBs that shipped to production, including assembly and test\n, • Proficiency in Altium Designer and/or KiCad\n, • Strong fundamentals in analog and digital circuit design\n, • Working knowledge of RF communication techniques: FSK, LoRa, modulation, encoding/decoding\n, • Able to produce a complete, correct RF schematic\n, • Hands-on lab experience - comfortable soldering, reworking boards, and debugging hardware yourself\n, • Bachelor's degree in Electrical Engineering or equivalent\n\n \n Preferred Qualifications \n\n • Experience working with PCB fab/assembly vendors\n, • Experience designing to military specifications (MIL-STD)\n, • Prior work with weapon-mounted devices/electronics \n, • Prior work on small UAV, drone, or other size/weight/power-constrained electronics\n, • Experience building RF transmitter/receiver modules for video transmission\n, • Prior U.S. military service, especially in Army, Marine Corps, Airborne, Ranger, SOF units (or any other relevant units). \n, • Active or prior Secret clearance is a plus.\n\n \n About PYRRHUS \n PYRRHUS was forged from battlefield frustration: the technology built for the modern Warfighter kept creating the very problems it promised to solve. \n That's why we built LADRS (Laser Aiming & Drone Remote System), our answer to one of the most dangerous problems on the modern battlefield: cognitive overload. \n PYRRHUS is a venture-backed Warfighter technology company, and LADRS is just the start. Everything we build is aimed at giving U.S. and allied Warfighters an unfair & decisive edge. This is a ground-floor role for someone ready to grow with the company. \n \n Work Environment \n\n • We believe in the mission: increasing the lethality and survivability of U.S. and allied Warfighters.\n, • Based at the PYRRHUS offices in the Atlanta, GA metro area.\n, • Open to local or relocating candidates. \n, • Travel 5%-10% CONUS/OCONUS to customer sites, exercises, and industry events.\n\n \n Compensation \n Compensation reflects a range of factors including relevant experience, education, certifications, specialized skills, geographic location, and business needs, and will be discussed during the interview process. \n \n Benefits & Perks \n We offer competitive pay and a real benefits package: \n\n • Comprehensive medical, dental, and vision plans\n, • Equity grants for new hires\n, • Unlimited PTO\n, • Generous company holiday calendar\n, • FSA\n, • HSA\n\n \n ITAR Compliance \n To conform to U.S. Government defense technology export regulations, including the International Traffic in Arms Regulations (ITAR), you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or otherwise eligible to obtain the required authorizations from the U.S. Department of State. \n \n Equal Opportunity Statement \n PYRRHUS is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, protected veteran status, or any other characteristic protected by applicable federal, state, or local law. \n \n Application Requirements \n If you're interested, please use this form or email tools@pyrrhusaero.com to submit: \n\n • Resume/CV highlighting relevant experience\n, • Brief description of your most challenging technical problem and how you solved it\n, • Cover letter explaining your interest and relevant background\n, • Portfolio or GitHub links showcasing relevant projects (especially autonomous systems, computer vision, or embedded work)\n

Job DescriptionHermeus is a venture-backed defense aviation company reclaiming the lost art of rapid iterative prototyping to build the fastest aircraft in the world today. By prioritizing relentless hardware iteration, we deliver high-speed systems at the pace of the modern battlefield. We work with the Department of War to provide the high-speed capabilities our nation and its allies need to maintain a durable, asymmetric advantage. About The Role: This role requires strong RF fundamentals, broad electrical systems experience, and the ability to move quickly from architecture to hardware integration and test. You will work closely with avionics, GNC, flight software, manufacturing, quality, test, and operations teams to deliver reliable communication, telemetry, navigation, and sensor/instrumentation systems. Responsibilities • Define RF system requirements, architectures, interfaces, and verification approaches., • Develop block diagrams, link budgets, interface documentation, test plans, and integration procedures., • Design, build, integrate, and test RF hardware including antennas, radios, RF modules, cabling, connectors, and supporting electrical assemblies., • Execute RF testing, including conducted RF tests, antenna measurements, environmental testing, and system-level validation., • Troubleshoot RF performance issues and drive corrective actions through design, build, integration, and test., • Support aircraft and ground station integration, ground test, flight test, and off-nominal troubleshooting., • Analyze RF test and flight data, document results, and communicate risks and recommendations., • Support regulatory coordination related to FCC, FAA, AFTRCC, and other RF spectrum or flight test requirements.Requirements, • Bachelor’s degree in electrical engineering or a related field., • 4+ years of experience with RF, antenna, radio, telemetry, communication, or electrical systems., • Experience with RF/electrical test equipment such as VNAs, spectrum analyzers, power meters, signal generators, oscilloscopes, and multimeters., • Strong RF fundamentals, including propagation, impedance matching, VSWR, gain/loss, noise figure, filtering, and link performance., • Experience developing RF test plans, procedures, setups, or data analysis workflows., • Strong hands-on troubleshooting skills in lab, integration, or test environments., • Ability to work cross-functionally and clearly communicate technical tradeoffs, results, risks, and recommendations., • Bias toward action and willingness to work hands-on with hardware.Preferred Skills and Experience, • Master’s degree focused on antennas, RF systems, microwave circuits, communications, or related field., • Experience with L, S, C, Ku, or Ka-band systems., • Aerospace, defense, aircraft, spacecraft, UAV, missile, or flight test experience., • Experience with antennas, telemetry, radios, navigation, communication links, or RF instrumentation., • Familiarity with modulation schemes such as QAM, BPSK, QPSK, or SOQPSK., • Experience with HFSS, CST, FEKO, ADS, MATLAB, Python, or similar tools., • Hands-on prototyping skills, including soldering, cable fabrication, and connectorization., • EMI/EMC or qualification testing experience, including MIL-STD-461, MIL-STD-810, MIL-STD-704, MIL-STD-464, or DO-160., • Startup, rapid prototyping, or agile hardware development experience., • Ability to travel on short notice for integration, ground test, or flight test support.The salary information provided is a general guideline only. Hermeus takes various factors into account, including, but not limited to, the position's scope and responsibilities, the candidate's professional background, education and training, essential skills, and market and business considerations, when presenting a job offer. Salary is only one part of our total compensation and benefits package. Hermeus offers competitive salary and equity, unlimited PTO policy, paid parental leave, potential for year-end bonuses, and more! 100% employer-paid health care401k & Retirement PlansUnlimited PTOWeekly Paid Office LunchesEnd of Year BonusesFully stocked breakroomsStock Options Paid Parental LeaveU.S. EXPORT CONTROL COMPLIANCE STATUS The person hired will have access to information and items subject to U.S. export controls, and therefore, must either be a “U.S. person” as defined by 22 C.F.R. § 120.62 or otherwise eligible for deemed export licensing. US persons include U.S. citizens, U.S. nationals, lawful permanent residents (green card holders), and asylees and refugees with such status granted, not pending. EQUAL OPPORTUNITYHermeus is an Equal Opportunity Employer. Employment decisions at Hermeus are based solely on merit, competence, and qualifications, without regard to race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability, or any other legally protected status. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description Are you passionate about pioneering innovations in the semiconductor industry? At Falcomm, we are on a mission to transform semiconductor technologies into tangible, real-world solutions. We specialize in crafting energy-efficient power amplifier products that set the standard for excellence in performance. As an RF Power Amplifier Design Engineer, you will join our dedicated team of experts who are committed to pushing the boundaries of semiconductor technology. Your role will be instrumental in shaping products that not only meet but exceed our customers' expectations. We are looking for an individual who thrives in a fast-paced environment, is eager to contribute to cutting-edge projects, and is motivated by the challenge of creating real-world applications of semiconductor innovation. If you have a creative mindset and a strong background in RFIC/MMIC design, we invite you to come and make your mark at Falcomm, where innovation meets sustainability in energy-efficient solutions. Become part of a dynamic team where your skills and ideas can truly elevate the field of semiconductors and help us fulfill our vision of delivering unmatched power amplifier technologies. Responsibilities • Design and develop RF power amplifiers for applications such as SATCOM, Wi-Fi, and cellular., • Collaborate with cross-functional teams to integrate RF power amplifier designs into larger SoC systems., • Create prototype and test RF power amplifier designs to ensure reliability and performance under real-world conditions., • Present detailed design reviews covering IC, package, electromagnetic (EM), simulation results, measurement data, and thermal considerations; all related to continuous improvement of RF design processes., • Stay on top of industry trends and advancements in semiconductor technology., • Support all stages of product development, from concept to mass production. Requirements • Masters or PhD in Electrical Engineering or a related field; with an educational emphasis on RF/microwave integrated circuits design., • 3+ years of experience in RF power amplifier design and development up to 60GHz., • PA tapeout experience using SOI or SiGe technologies., • Strong knowledge of differential and single-ended power amplifiers including modes of operation, matching, bias, and architecture considerations., • Strong circuit design skills, experience with IC layout, PEX extraction, performing electromigration analysis, and simulation of both linear and non-linear behavior of RF PAs to meet performance targets such as gain, linearity, power, and bandwidth., • Strong EM knowledge of passive components including couplers, baluns, and matching networks., • Proficiency in simulation and design tools such as Cadence Virtuoso, Keysight ADS, Keysight SystemVue, Siemens Calibre, etc., • Experience with EM simulators such as HFSS, Momentum, and EMX., • Knowledge of RF transceiver architectures, digital communication systems, spread spectrum, single and multi-carrier techniques and modulation types such as QPSK, APSK and QAM, • Must be willing to work on-site full-time at our office in Atlanta, GA. Preferred Qualifications • RF/microwave design experience in the Ku, K, Ka, Q, or V-band frequency ranges., • Familiarity with radio related test equipment such as spectrum analyzers, vector signal analyzers, vector signal generator, network analyzers, and hands-on experience in a lab with equipment for RF testing and measurement., • Excellent analytical and problem-solving skills to troubleshoot design issues. Benefits • Competitive salary based on experience; $160,000-$225,000 annually., • Generous Equity Package, • Coverage of premium for comprehensive Health, Dental, and Vision Insurance, • 401(k) Retirement Plan, • Flexible Paid Time Off (PTO) and Sick Leave, • Signing bonuses and relocation bonuses DISCLOSURE • Falcomm is an Equal Opportunity Employer; employment with Falcomm is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status., • Applicants wishing to view a copy of Falcomm’s Affirmative Action Plan for veterans and individuals with disabilities, or applicants requiring reasonable accommodation to the application/interview process should notify Falcomm., • To conform to U.S. Government export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State.

Job Description Hermeus is a venture-backed defense aviation company reclaiming the lost art of rapid iterative prototyping to build the fastest aircraft in the world today. By prioritizing relentless hardware iteration, we deliver high-speed systems at the pace of the modern battlefield. We work with the Department of War to provide the high-speed capabilities our nation and its allies need to maintain a durable, asymmetric advantage. About The Role: This is a hands-on, cross-functional role supporting GNC, power distribution, instrumentation, communications, RF systems, flight software, test, manufacturing, and vehicle integration. You will own detailed hardware design while also understanding how that hardware performs at the subsystem and integrated vehicle level. Responsibilities: • Design, analyze, integrate, and test avionics and electrical systems for flight vehicles, ground test assets, and supporting infrastructure., • Own electrical hardware from concept through design, procurement, build, checkout, qualification, and vehicle integration., • Develop schematics, wiring diagrams, harness/interface definitions, test plans, procedures, and technical documentation., • Support architecture trades across power distribution, instrumentation, controls, data acquisition, communication buses, and RF interfaces., • Work with GNC, flight software, propulsion, structures, hydraulics, test, manufacturing, and operations teams to define requirements and integrated solutions., • Perform electrical design analysis, including power budgets, signal integrity, thermal considerations, grounding/bonding, and interface compatibility., • Bring up, troubleshoot, and modify electrical systems at the bench, subsystem, and vehicle level., • Support ground test, environmental test, integrated vehicle test, and flight test campaigns., • Maintain configuration control over avionics hardware, drawings, wiring diagrams, work instructions, test procedures, and as-built documentation., • Support design reviews, test readiness reviews, failure investigations, and risk mitigation planning., • Work hands-on with technicians, test engineers, and manufacturing teams to quickly resolve issues and keep hardware moving.Requirements:, • Bachelor’s degree in electrical engineering or a related engineering discipline., • 4+ years of experience in electrical hardware design, avionics integration, instrumentation, control systems, digital communication buses, analog design, power electronics, harness design, or vehicle electrical systems., • Experience creating or interpreting schematics, wiring diagrams, interface control documents, or test procedures., • Strong troubleshooting skills and comfort working hands-on with electrical hardware., • Ability to work cross-functionally with engineering, test, manufacturing, and operations teams., • Bias toward action and willingness to operate in a fast-paced hardware development environment.Preferred Skills and Experience:, • Master’s degree in electrical engineering, mechanical engineering, aerospace engineering, or a related discipline., • Experience with embedded systems, device integration, verification and validation, environmental qualification, ground testing, or flight testing., • Experience with avionics devices, sensors, data acquisition, telemetry, instrumentation, or signal conditioning hardware., • Familiarity with tools such as DMMs, oscilloscopes, power supplies, SPICE, MATLAB, LabVIEW, or Ansys., • Experience with Altium Designer, Siemens NX, Teamcenter, Git, Jira, Jama, Confluence, or similar tools., • Familiarity with avionics interfaces and hardware such as RS-485, Ethernet, ARINC-429, CAN, GPS, INS, FPGAs, D38999-style connectors, or similar., • Familiarity with aerospace standards such as IPC-620, MIL-STD-810, MIL-STD-704, MIL-STD-461, MIL-STD-464, MIL-HDBK-516, or DO-160., • Experience with DC power systems, batteries, motors, generators, power distribution, grounding, bonding, or EMI/EMC., • Experience supporting vehicle bring-up, integrated checkout, anomaly resolution, or test operations., • Project experience with aircraft, launch vehicles, spacecraft, UAVs, missiles, defense systems, or other complex hardware platforms., • Ability to travel on short notice to support test campaigns. Avionics Electrical Engineer I $91,800-$112,200 Avionics Electrical Engineer II $114,750-$140,250 The salary range listed for this role is intended as a general guideline. Final compensation will be determined based on a variety of factors, including role scope and responsibilities, relevant experience, education and training, key skills, market data, and business needs. At Hermeus, compensation is only one part of our total rewards package. We offer competitive pay, equity, and a range of benefits designed to support our team. Benefits: • Health & Wellness: 100% employer-paid healthcare and pet insurance, • Financial: Competitive pay, stock options, 401(k) retirement plan, and potential year-end bonuses, • Time Off: Paid parental leave, 12 federal holidays, unlimited PTO for exempt employees, and generous accrued PTO for non-exempt employees, • Office Perks: Weekly paid office lunches and fully stocked breakrooms U.S. EXPORT CONTROL COMPLIANCE STATUS The person hired will have access to information and items subject to U.S. export controls, and therefore, must either be a “U.S. person” as defined by 22 C.F.R. § 120.62 or otherwise eligible for deemed export licensing. US persons include U.S. citizens, U.S. nationals, lawful permanent residents (green card holders), and asylees and refugees with such status granted, not pending. EQUAL OPPORTUNITY Hermeus is an Equal Opportunity Employer. Employment decisions at Hermeus are based solely on merit, competence, and qualifications, without regard to race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability, or any other legally protected status. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description Are you passionate about pioneering innovations in the semiconductor industry? At Falcomm, we are on a mission to transform semiconductor technologies into tangible, real-world solutions. We specialize in crafting energy-efficient RF products that set the standard for excellence in performance. As an RFIC Test Engineer, you will perform tests on Power Amplifiers, LNAs, and other circuits on-chip. Additional responsibilities will include developing test methodologies, documenting test and calibration procedures, and automating test processes. Your role will be instrumental in characterizing and validating products that not only meet but exceed our customers' expectations. We need a BSEE or MSEE with at least two years of experience in RF/mmWave Test and Characterization of compound semiconductors and/or silicon integrated circuits up to 100GHz in frequency range. We are looking for an individual who thrives in a fast-paced environment, is eager to contribute to cutting-edge projects, and is motivated by the challenge of creating real-world applications of semiconductor innovation. RESPONSIBILITIES: • Perform on-chip electrical testing of power amplifiers, LNAs, and other RFICs, • Set up the RF test bench for measurements and conduct manual on-wafer/on-die probing, • RFIC device characterization and performance measurements, • Design RF PCBs for RFIC products and internal use, • Analyze test data and prepare characterization reports, • Automate RFIC testing through scripting, • Validate setups by comparing setup performance to a standard Requirements • BS or MS in electrical engineering or related technical field, • 2+ years of hands-on experience in RF and mmWave testing and characterization of compound semiconductor and/or silicon-based integrated circuits., • Skilled in manual on-die probing and test setup configuration, including calibration, measurement automation, and data analysis., • Hands-on experience with operation and/or programming of on-wafer test equipment such as network analyzers, signal generators, power supplies, power meters, and spectrum analyzers., • Understanding of RF theory and standard test practices., • Must be willing to work on-site full-time at our office in Atlanta, GA Preferred skills: • Experience performing HTOL and temperature testing, • Experience with built-in self-test methods, • Experience scripting in python and/or MATLab for measurement automation, • Experience with power amplifier and LNA measurement and characterization, • Experience in RFIC design and characterization Benefits • Competitive Salary and Equity Package, • Comprehensive Health, Dental, and Vision Insurance, • 401(k) Retirement Plan, • Paid Time Off (PTO) and Sick Leave DISCLOSURE • Falcomm is an Equal Opportunity Employer; employment with Falcomm is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status., • Applicants wishing to view a copy of Falcomm’s Affirmative Action Plan for veterans and individuals with disabilities, or applicants requiring reasonable accommodation to the application/interview process should notify Falcomm., • To conform to U.S. Government export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State.

Job Description Are you passionate about developing advanced hardware for next-generation wireless technologies? At Falcomm, we are transforming innovative semiconductor research into real-world solutions through high-performance, energy-efficient RF power amplifier technologies. Our mission is to enable faster, more efficient wireless communication systems by pushing the boundaries of RF design and integration. Falcomm is seeking an RF/mmWave PCB Engineer to design and develop high-frequency printed circuit boards supporting RFIC and RF front-end systems. This role will focus on PCB architecture, layout, and signal integrity optimization for RF and mmWave applications. The position requires close collaboration with RFIC designers, system engineers, packaging teams, and test engineers to ensure robust performance from prototype through production. Responsibilities: • Design and develop high-frequency PCBs for RF and mmWave systems supporting RFIC and RF front-end architectures, specifically in use cases up to 50GHz.., • Perform PCB layout for high-speed and high-frequency circuits while maintaining signal integrity and minimizing loss., • Work with RFIC, packaging, and system teams to integrate RF components, amplifiers, and supporting circuitry., • Evaluate and select appropriate PCB materials, stack-ups, and transmission line structures for high-frequency performance., • Conduct signal integrity and electromagnetic simulations to validate PCB designs., • Support hardware bring-up, debugging, and RF measurement activities., • Document design methodologies, test results, and hardware performance. Requirements • Bachelor’s degree in Electrical Engineering, Computer Engineering, Computer Science, or a related discipline., • 1-3 years of experience designing high-frequency PCBs for RF or microwave systems., • Strong understanding of RF transmission lines, impedance matching, and signal integrity principles., • Must be willing to work full-time, onsite, in Atlanta, GA. Preferred Skills: • Experience designing PCBs for RF or mmWave systems including high power rf amplifiers, mixers, LNAs, or RF front-end modules., • Proficiency with PCB design tools such as Altium, Cadence Allegro, or similar platforms., • Knowledge of high-frequency materials and stack-up design for RF applications., • Experience supporting RF hardware testing and measurement using laboratory equipment. Benefits • Competitive Salary and Equity Package, • Comprehensive Health, Dental, and Vision Insurance, • 401(k) Retirement Plan, • Paid Time Off (PTO) and Sick Leave Disclosure: • Falcomm is an Equal Opportunity Employer; employment with Falcomm is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status., • Applicants wishing to view a copy of Falcomm’s Affirmative Action Plan for veterans and individuals with disabilities, or applicants requiring reasonable accommodation to the application/interview process should notify Falcomm., • To conform to U.S. Government export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State.

Job Description Are you passionate about pioneering innovations in the semiconductor industry? At Falcomm, we are on a mission to transform semiconductor technologies into tangible, real-world solutions. We specialize in crafting energy-efficient power amplifier products that set the standard for excellence in performance. As an RFIC EM Design Engineer, you will join our dedicated team of experts who are committed to pushing the boundaries of semiconductor technology. Your role will be instrumental in simulating and shaping products that will not only meet but exceed our customers' expectations. We are looking for an individual who thrives in a fast-paced environment, is eager to contribute to cutting-edge projects, and is motivated by the challenge of creating real-world applications of semiconductor innovation. If you have a creative mindset and a strong background in RFIC EM design, we invite you to come and make your mark at Falcomm, where innovation meets sustainability in energy-efficient solutions. Become part of a dynamic team where your skills and ideas can truly elevate the field of semiconductors and help us fulfill our vision of delivering unmatched power amplifier technologies. Responsibilities: • Lead the design of RF circuits and work closely with RFIC design engineers to optimize overall performance., • Collaborate across various teams to convert customer specifications into design requirements., • Assist in prototype development, including evaluation, troubleshooting, and optimization, to ensure timely delivery of samples to the customer., • Prepare detailed documentation and reports on design optimization processes and results., • Stay on top of industry trends and advancements in semiconductor technology. Requirements • MSEE or PhD, • At least 2 years of experience in Electromagnetics (EM), • Strong knowledge of RF/Microwave principles and Electromagnetic theory, • Solid understanding of module components, such as power amplifiers, low noise amplifiers, RF switches, couplers, filters, and multi-chip modules, • Proficient in creating 3D circuit models using EM tools and running simulations on passive RF structures, with the ability to translate between models, simulations, physical implementation, and measured performance, • Excellent analytical and problem-solving skills to collect data and troubleshoot design issues., • Strong communication skills and ability to work in a collaborative team environment, • Proficient with tools such as, Spectre RF, ADS, Matlab, and HFSS, • Must be willing to work on-site full-time at our office in Atlanta, GA. Benefits • Competitive Salary and Equity Package, • Comprehensive Health, Dental, and Vision Insurance, • 401(k) Retirement Plan, • Paid Time Off (PTO) and Sick Leave DISCLOSURE • Falcomm is an Equal Opportunity Employer; employment with Falcomm is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status., • Applicants wishing to view a copy of Falcomm’s Affirmative Action Plan for veterans and individuals with disabilities, or applicants requiring reasonable accommodation to the application/interview process should notify Falcomm., • To conform to U.S. Government export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State.

Job Description TRC is working alongside a nimble firm in the aerospace arena that is seeking an Aerospace Engineer to help develop next-generation spacecraft, small satellites, reentry capsules, and hypersonic flight systems. As a Senior Avionics Engineer, you will lead the design, development, integration, and testing of avionics hardware, including PCBs, power systems, telemetry, instrumentation, and embedded electronics, supporting programs from concept through flight test. US Citizenship required. Key Responsibilities Design and develop avionics subsystems, power systems, PCBs, wiring harnesses, and electronic assemblies. Perform analog, digital, and mixed-signal circuit design for control, communication, propulsion, and power applications. Conduct requirements development, trade studies, verification testing, and release-to-production activities. Integrate and validate custom and COTS avionics hardware for ground and flight systems. Support avionics mission assurance, safety requirements, and process improvements. Qualifications BS in Electrical Engineering, Computer Engineering, or related field. Hands-on experience with PCB design, schematic capture, integration, and testing (Altium preferred). Experience with microcontrollers, power management/distribution, RF systems, and sensor interfaces. Knowledge of analog and digital circuit design, including Ethernet communications and ARM-based systems. Proficiency using electronic test equipment (oscilloscopes, multimeters, logic analyzers, etc.). Understanding of EMI, bonding, grounding, and systems engineering principles. Strong communication and teamwork skills. U.S. Citizenship required; must be eligible for a DoD Secret Clearance. Preferred Qualifications MS degree in a relevant engineering discipline. Aerospace, spacecraft, UAV, aircraft, or launch vehicle avionics experience. Familiarity with UART, RS-232/422/485, CAN, SPI, Ethernet, RTDs, thermocouples, and industrial I/O. Knowledge of aerospace and military standards such as MIL-STD-810, MIL-STD-461, RCC-319/324, and NASA-8739.

Job Description Are you passionate about ensuring the reliability and performance of advanced semiconductor technologies? At Falcomm, we are transforming innovative semiconductor research into real-world solutions through high-performance, energy-efficient RF power amplifier technologies. Our mission is to deliver reliable, high-efficiency wireless solutions that enable the next generation of communication systems. Falcomm is seeking an RFIC Reliability Engineer to lead reliability analysis and qualification activities for RF integrated circuits and semiconductor products. This role will focus on evaluating device reliability, identifying failure mechanisms, and developing testing methodologies to ensure long-term performance and robustness of RFIC technologies. The position requires close collaboration with RFIC designers, process engineers, packaging teams, and manufacturing partners to support product development from early design through production. Responsibilities: • Conducting reliability modeling for all RFIC designs using validated device degradation models (e.g., HCI, BTI, EM)., • Analyze device degradation mechanisms and perform failure analysis to identify root causes of reliability issues., • Define and execute reliability qualification plans including stress testing, accelerated life testing, and environmental testing., • Develop and implement reliability testing strategies for RFIC devices and semiconductor products., • Collaborate with RFIC design, packaging, and manufacturing teams to improve product reliability and robustness., • Review design and process changes to assess potential reliability impacts., • Support silicon bring-up, characterization, and long-term reliability validation., • Document reliability methodologies, test results, and qualification reports. Requirements • Bachelor’s degree in Electrical Engineering, Computer Engineering, Computer Science, or a related discipline., • 3-5 years reliability engineering experience., • Strong understanding of semiconductor device physics and reliability mechanisms., • Must be willing to work full-time, onsite, in Atlanta, GA. Preferred Skills: • Experience with RFIC technologies such as SOI and GaN., • Experience using tools such as Cadence RelXpert and Voltus-Fi for device reliability and peak metal temperatures, • Knowledge of semiconductor reliability testing methods including HTOL, HAST, electromigration, and thermal cycling., • Experience with failure analysis techniques and reliability modeling., • Strong analytical and communication skills with the ability to work across engineering teams. Benefits • Competitive Salary and Equity Package, • Comprehensive Health, Dental, and Vision Insurance, • 401(k) Retirement Plan, • Paid Time Off (PTO) and Sick Leave Disclosure: • Falcomm is an Equal Opportunity Employer; employment with Falcomm is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status., • Applicants wishing to view a copy of Falcomm’s Affirmative Action Plan for veterans and individuals with disabilities, or applicants requiring reasonable accommodation to the application/interview process should notify Falcomm., • To conform to U.S. Government export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State.

Job Description Are you passionate about pioneering innovations in the semiconductor industry? At Falcomm, we are on a mission to transform semiconductor technologies into tangible, real-world solutions. We specialize in crafting energy-efficient power amplifier products that set the standard for excellence in performance. As a RF/mm-Wave GaN Power Amplifier Design Engineer, you will join our dedicated team of experts who are committed to pushing the boundaries of semiconductor technology. Your role will be instrumental in shaping products that not only meet but exceed our customers' expectations. We are looking for an individual who thrives in a fast-paced environment, is eager to contribute to cutting-edge projects, and is motivated by the challenge of creating real-world applications of semiconductor innovation. We invite you to come and make your mark at Falcomm, where innovation meets sustainability in energy-efficient solutions. Become part of a dynamic team where your skills and ideas can truly elevate the field of semiconductors and help us fulfill our vision of delivering unmatched power amplifier technologies. RESPONSIBILITIES: • Design and develop RF power amplifiers for applications such as SATCOM, Wi-Fi, and cellular., • Collaborate effectively with colleagues at all levels within the organization, demonstrating problem-solving skills, data analysis, and critical thinking., • Create test plans for RF power amplifier designs to ensure reliability and performance under real-world conditions., • Perform EM design using HFSS on die, on package and on PCB., • Present detailed design reviews covering IC, package, electromagnetic (EM), simulation results, measurement data, and thermal considerations; all related to continuous improvement of RF design processes., • Stay on top of industry trends and advancements in semiconductor technology., • Support all stages of product development, from concept to mass production. Requirements • Master's degree in Electrical Engineering or a related field, with an educational emphasis on RF/microwave integrated circuits design., • 3+ years of experience in RF power amplifier design and development up to 60GHz., • PA tapeout experience using GaN technologies., • Familiarity with RF GaN device physics, including trapping and thermals, and transistor models., • Strong knowledge of power amplifiers including modes of operation, matching, bias, and architecture considerations., • Strong circuit design skills, experience with IC layout, PEX extraction, performing electromigration analysis, and simulation of both linear and non-linear behavior of RF PAs to meet performance targets such as gain, linearity, power, and bandwidth., • Strong EM knowledge of passive components including couplers, baluns, and matching networks., • Proficiency in simulation and design tools such as Cadence Virtuoso, Keysight ADS, Keysight SystemVue, Siemens Calibre, HFSS, Momentum, and EMX., • Knowledge of RF transceiver architectures, digital communication systems, spread spectrum, single and multi-carrier techniques and modulation types such as QPSK, APSK and QAM. Preferred skills: • PhD in Electrical Engineering or a related field, with an educational emphasis on RF/microwave integrated circuits design., • Understanding of PA thermal and packaging constraints., • RF/microwave design experience in the Ku, K, Ka, Q, or V-band frequency ranges., • Familiarity with radio related test equipment such as spectrum analyzers, vector signal analyzers, vector signal generators, and network analyzers, and hands-on experience in a lab with equipment for RF testing and measurement. Benefits • Competitive salary based on experience; $160,000-$225,000 annually., • Generous Equity Package, • Coverage of premium for comprehensive Health, Dental, and Vision Insurance, • 401(k) Retirement Plan, • Flexible Paid Time Off (PTO) and Sick Leave, • Signing bonuses and relocation bonuses DISCLOSURE • Falcomm is an Equal Opportunity Employer; employment with Falcomm is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status., • Applicants wishing to view a copy of Falcomm’s Affirmative Action Plan for veterans and individuals with disabilities, or applicants requiring reasonable accommodation to the application/interview process should notify Falcomm., • To conform to U.S. Government export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State.

Job Description Are you passionate about advancing semiconductor technology and wireless communication systems? At Falcomm, we are transforming innovative semiconductor research into real-world solutions by developing energy-efficient RF power amplifiers and RF front-end technologies. Our mission is to deliver high-performance wireless solutions that improve efficiency, performance, and scalability in modern communication systems. Falcomm is seeking an Analog RFIC Engineer to design and develop high-performance analog and RF integrated circuits that support our next-generation wireless technologies. This role will contribute to the design of critical analog and RF building blocks used in advanced RF front-end architectures. The position requires strong technical expertise and close collaboration with RFIC designers, system engineers, layout engineers, and test teams to deliver robust semiconductor solutions from concept through silicon validation. Responsibilities: • Design and develop analog and RF integrated circuit blocks including bias networks, regulators, amplifiers, and supporting analog circuitry., • Perform schematic design, circuit simulation, and performance optimization using industry-standard design tools., • Collaborate with RFIC designers and system engineers to integrate analog circuits into RF front-end architectures., • Work with layout engineers to ensure designs meet performance, area, and reliability requirements., • Support silicon validation, characterization, and debugging of fabricated chips., • Document design methodologies, simulation results, and measurement data., • Participate in design reviews and contribute to continuous improvement of design processes. Requirements • Bachelor’s degree in Electrical Engineering, Computer Engineering, Computer Science, or a related discipline., • 1-3 year of Experience with analog circuit design., • Strong understanding of analog circuit design principles and semiconductor device behavior., • Must be willing to work full-time, onsite, in Atlanta, GA. Preferred Skills: • Experience designing analog or RF circuits in CMOS, SOI, or similar semiconductor processes., • Familiarity with RFIC design tools such as Cadence Virtuoso, Spectre, or ADS., • Understanding of RF front-end architectures and wireless communication systems., • Experience supporting silicon validation and measurement of integrated circuits. Benefits • Competitive Salary and Equity Package, • Comprehensive Health, Dental, and Vision Insurance, • 401(k) Retirement Plan, • Paid Time Off (PTO) and Sick Leave Disclosure: • Falcomm is an Equal Opportunity Employer; employment with Falcomm is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status., • Applicants wishing to view a copy of Falcomm’s Affirmative Action Plan for veterans and individuals with disabilities, or applicants requiring reasonable accommodation to the application/interview process should notify Falcomm., • To conform to U.S. Government export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State.

Job Description Senior Lead Network Engineer II Employment Type: Full Time Department: Information Technology CGS is seeking an experienced Senior Lead Network Engineer to join a team focused on the evaluation, enhancement, and maintenance of a large-scale network project that includes both wired and wireless network infrastructure and related hardware & software. The project's objectives are to evaluate the current setup of existing disparate networks and design & implement a network infrastructure that encompasses the wireless, wired, and software network requirements. The project will also include consultation regarding hardware and software necessary to facilitate the proper support for this encompassing infrastructure, and the associated systems testing, vulnerability assessments, and quality assurance needed to implement the new setup. This Network Engineer will interface with state and local governmental personnel, internal stakeholders, subject matter experts, and vendor(s) who will provide development services. CGS brings motivated, highly skilled, and creative people together to solve the government’s most dynamic problems with cutting-edge technology. To carry out our mission, we are seeking candidates who are excited to contribute to government innovation, appreciate collaboration, and can anticipate the needs of others. Here at CGS, we offer an environment in which our employees feel supported, and we encourage professional growth through various learning opportunities. Skills and attributes for success: - Operate and manage NPS network infrastructure; - Improve infrastructure monitoring and reporting capabilities based on the deployment of network management software; - Develop, maintain and deliver infrastructure documentation relating to the network infrastructure within the NPS environment; - Review current best practices and provide recommendations for architecture, design, management and operation of the network infrastructure; - Administration of the Cloudpath (or equivalent) onboarding process, monitoring and troubleshooting of wireless network health, maintenance of wireless network infrastructure, implementation of network security patches and software/firmware updates, from 0800 to 1700 PST, Monday-Friday; - Assess the NPS network infrastructure and make recommendations on improvement and optimization; - Define and conduct testing procedures for new infrastructure projects; - Implement technology solutions within the NPS network environment; - Provide design guidance on network solutions within NPS infrastructure projects; - Provide informal training and knowledge transfer to NPS resources on best practices and theory of operation relating to network products. Qualifications: - Bachelor’s Degree from an accredited college or university in Engineering, Computer Science, Business, Information systems or a related discipline. - Strong documentation skills including updating JIRA Tickets, Wiki Pages and Network Diagrams - Ability to communicate with end users, cross-organizational staff and technical assistance center. - CWNA Certification or equivalent - BCNE Certification or equivalent - Experience utilizing (RF) site survey tools such as Ekahau, RF Scanners and Wireshark packet capture software - Strong knowledge of layer 2 switching and layer 3 routing protocols; including VLANs, 802.1w, OSPF and VRRP - Strong knowledge of network security including; 802.1x, MAC Authentication, ACLs, RADIUS and Certificate of Authority (CA) - Strong knowledge of troubleshooting RF and LAN issues - Working knowledge of LINUX, MS Server 2013, VMware, etc. - A Master’s Degree in Engineering, Computer Science, Business, Information systems or a related discipline - At least 3 years experience with disaster recovery plan creation / implementation testing or projects - Experience with penetration testing, vulnerability assessment, and vulnerability testing - Experience with cyber threat information collection and analysis - Working knowledge of Agile/SCUM project management methodologies - Additional Industry certifications/licences Our Commitment: Contact Government Services (CGS) strives to simplify and enhance government bureaucracy through the optimization of human, technical, and financial resources. We combine cutting-edge technology with world-class personnel to deliver customized solutions that fit our client’s specific needs. We are committed to solving the most challenging and dynamic problems. For the past seven years, we’ve been growing our government-contracting portfolio, and along the way, we’ve created valuable partnerships by demonstrating a commitment to honesty, professionalism, and quality work. Here at CGS we value honesty through hard work and self-awareness, professionalism in all we do, and to deliver the best quality to our consumers mending those relations for years to come. We care about our employees. Therefore, we offer a comprehensive benefits package. - Health, Dental, and Vision - Life Insurance - 401k - Flexible Spending Account (Health, Dependent Care, and Commuter) - Paid Time Off and Observance of State/Federal Holidays Contact Government Services, LLC is an Equal Opportunity Employer. Applicants will be considered without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. Join our team and become part of government innovation! Explore additional job opportunities with CGS on our Job Board: https://cgsfederal.com/join-our-team/ For more information about CGS please visit: https://www.cgsfederal.com or contact: Email: info@cgsfederal.com #CJ We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description Are you passionate about building advanced semiconductor systems that power next-generation wireless technologies? At Falcomm, we are transforming innovative semiconductor research into real-world products through energy-efficient RF power amplifier and wireless solutions. Our mission is to push the boundaries of performance, efficiency, and integration in modern communication systems. Falcomm is seeking an ASIC Engineer to support the development of mixed-signal and digital integrated circuits that interface with our RF technologies. This role will contribute to the design, implementation, and verification of ASIC components within larger system-on-chip platforms. The position requires strong collaboration with RFIC, analog, verification, and system engineering teams to deliver high-performance silicon solutions. Responsibilities: • Design and implement digital and/or mixed-signal ASIC blocks from specification to tapeout, • Develop RTL (Verilog/SystemVerilog) and/or transistor-level designs depending on focus area, • Collaborate with RFIC, analog, and system engineers to integrate digital logic within RF and mixed-signal chip architectures., • Perform synthesis, timing closure, and power optimization, • Work with verification engineers to define testbenches and ensure robust design validation, • Support functional verification and debugging of ASIC components in collaboration with verification teams., • Assist with synthesis, timing analysis, and physical implementation activities to ensure design readiness for tape-out., • Contribute to silicon bring-up, debugging, and post-silicon validation activities., • Document design architecture, implementation details, and verification results. Requirements • Bachelor’s or Master's degree in Electrical Engineering, Computer Engineering, Computer Science, or a related discipline., • 1-3 years of experience developing and implementing in ASIC design., • Strong experience with RTL design (Verilog/SystemVerilog) and/or analog/mixed-signal IC design, • Solid understanding of digital design fundamentals (timing, clocking, power, etc.), • Experience with ASIC tool flows (e.g., Synopsys, Cadence, or similar), • Familiarity with verification methodologies (UVM is a plus), • Strong problem-solving skills and ability to work across disciplines, • Must be willing to work full-time, onsite, in Atlanta, GA. Preferred Skills • Strong problem-solving skills in complex digital design areas such as clock domain crossing, timing optimization, and low-power design techniques., • Hands-on experience with industry EDA tools including HDL simulators, linting tools, and FPGA development platforms., • Proficiency in scripting languages such as Python or TCL to support design automation and verification workflows. Benefits • Competitive Salary and Equity Package, • Comprehensive Health, Dental, and Vision Insurance, • 401(k) Retirement Plan, • Paid Time Off (PTO) and Sick Leave Disclosure: • Falcomm is an Equal Opportunity Employer; employment with Falcomm is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status., • Applicants wishing to view a copy of Falcomm’s Affirmative Action Plan for veterans and individuals with disabilities, or applicants requiring reasonable accommodation to the application/interview process should notify Falcomm., • To conform to U.S. Government export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State.

Job Description Hermeus is a venture-backed defense aviation company reclaiming the lost art of rapid iterative prototyping to build the fastest aircraft in the world today. By prioritizing relentless hardware iteration, we deliver high-speed systems at the pace of the modern battlefield. We work with the Department of War to provide the high-speed capabilities our nation and its allies need to maintain a durable, asymmetric advantage. As Senior Avionics Electrical Engineer at Hermeus, you will be responsible for the design, testing, and integration of GNC systems, electrical hardware, control software, power distribution, and RF communications for our hypersonic vehicles. Responsibilities: • You will shape the future of commercial supersonic and hypersonic flight. Our team is responsible for the design, testing, and integration of GNC systems, electrical hardware, control software, power distribution, and RF communications., • The Senior Electrical Engineer position requires system-level architects who are also experts in their specialized areas., • As an Avionics Electrical Engineer, you'll take charge of designing and testing custom electrical systems for both ground test and flight applications., • You will ensure the seamless integration and compatibility of your designs at the sub-system and integrated system level., • As a member of the avionics team, you'll have the opportunity to work across disciplines to create control and instrumentation systems for engine, structural, hydraulic, and electrical systems. Requirements:, • Bachelor's degree in electrical engineering, • 5+ years of experience in multiple of the following areas: electrical hardware design, control systems, instrumentation and signal conditioning, digital communication busses, analog design and simulation, power electronics, harness designPreferred Skills and Experience:, • Master's degree in electrical, mechanical, aerospace engineering or similar disciplines, • Demonstrated project experience with embedded design, device integration, V&V, environmental qualification and/or flight testing, • Familiarity with test and simulation tools (DMM, Oscilloscope, power supplies, SPICE, Ansys), • Experience with electrical and mechanical design and version control software (Altium Designer, Siemens NX, Teamcenter, Capital Harness, Git, Teamcenter), • Experience with avionics devices and protocols (RS-485, ARINC-685, FPGAs, GPS, INS, D38999 style connectors, etc.), • Strong analysis and troubleshooting skills, • Familiarity with aerospace industry standards (IPC-620, MIL-STD-810, MIL-STD-704, MIL-HDBK-516C, MIL-STD-464D, DO-160G), • Experience working with DC power systems (Batteries, Motors, Generators, etc.), • A bias towards action, and a willingness to work hands-on to make it happen, • Engineering project team experience, • Ability to travel on short notice to support test campaigns The salary range listed for this role is intended as a general guideline. Final compensation will be determined based on a variety of factors, including role scope and responsibilities, relevant experience, education and training, key skills, market data, and business needs. At Hermeus, compensation is only one part of our total rewards package. We offer competitive pay, equity, and a range of benefits designed to support our team. Benefits: • Health & Wellness: 100% employer-paid healthcare and pet insurance, • Financial: Competitive pay, stock options, 401(k) retirement plan, and potential year-end bonuses, • Time Off: Paid parental leave, 12 federal holidays, unlimited PTO for exempt employees, and generous accrued PTO for non-exempt employees, • Office Perks: Weekly paid office lunches and fully stocked breakrooms U.S. EXPORT CONTROL COMPLIANCE STATUS The person hired will have access to information and items subject to U.S. export controls, and therefore, must either be a “U.S. person” as defined by 22 C.F.R. § 120.62 or otherwise eligible for deemed export licensing. US persons include U.S. citizens, U.S. nationals, lawful permanent residents (green card holders), and asylees and refugees with such status granted, not pending. EQUAL OPPORTUNITY Hermeus is an Equal Opportunity Employer. Employment decisions at Hermeus are based solely on merit, competence, and qualifications, without regard to race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability, or any other legally protected status. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description SPACEWORKS At SpaceWorks Enterprises, we specialize in next-generation high-speed flight systems, human and robotic spacecraft, as well as entry, descent & landing technologies. Our core competencies include conducting preliminary design of aerospace concepts, performing detailed multidisciplinary engineering analysis, developing commercial aerospace software, prototyping spacecraft hardware components, and conducting market and economic research within the aerospace industry. We serve clients across the Department of War, NASA, and the commercial space sector. A DAY IN THE LIFE The Senior Avionics Engineer will work with a small team of electrical and embedded software engineers on the design, development, testing, and evaluation of future spacecraft, small satellites, reentry capsules, and hypersonic flight systems, with specific emphasis on printed circuit boards, power systems, telemetry, and instrumentation. The position will span a broad range of product life cycle stages from concept development to flight test of prototype hardware. The Senior Avionics Engineer tasks will include: • Conceptual design of avionics subsystems for advanced concept spacecraft and aircraft, including power system sizing, component selection, and design trade studies, • Developing printed circuit boards, wiring harnesses, power systems, and avionics assemblies, starting with conceptualization and requirements definition, and moving to design, prototyping, verification, and release to production, • Designing and analyzing analog, digital, and mixed-signal circuits for power, command and control, communication, and propulsion subsystems, • Integrating and validating custom and commercial off-the-shelf avionics for ground and flight-test applications, • Supporting development of avionics mission and safety requirements as well as improving avionics development processes WHAT WE OFFER At SpaceWorks, we believe in cultivating a culture that offers the opportunity to grow both personally and professionally. It is our firm belief that work-life balance is critical to strong, happy, healthy employees. As we challenge what is possible and push the boundaries of innovation, we stand together as a team. Here you will find a community that is dedicated to our mission as well as your personal goals. Here are just a few of the benefits we offer to our employees - • Comprehensive healthcare coverage options including medical, telemedicine, vision, dental, long term disability, short term disability, health savings accounts, and flexible spending accounts, • Flexible work schedules - the position is in-office at our facility in Atlanta, GA, however we do offer telework days, compressed workweek options, core hours, and flex time to provide flexibility to our employees, • Time to reset - paid time off, paid holidays, and paid parental leave, • 401k + company match, opportunities for bonuses, employee experience events throughout the year, employee assistance program, and more WHAT WE ARE LOOKING FOR • BS degree in Electrical Engineering, Computer Engineering, or similar, • Experience with avionics systems engineering including requirements generation, power budgets, link budgets, mass budgets, functional and environmental testing, and cost analysis, • Direct experience with hands-on design and integration of microcontrollers, printed circuit boards, power management and distribution, and RF subsystems, • Direct hands-on experience with circuit design, schematic capture and PCB layout, and verification testing (Altium preferred), • Direct experience with analog signal conditioning circuitry related to reading sensors including amplification and filtering, • Direct experience with digital circuitry related to driving motors/solenoids, ARM microcontrollers, and Ethernet communications, • Experience with electronics test equipment (multimeter, oscilloscope, network analyzer, logic analyzer, etc...), • Understanding of EMI, bonding, and grounding architectures, • Highly organized team player with strong written and verbal communications skills, • Must be a U.S. citizen and eligible to obtain a DoW Secret Security Clearance BONUS POINTS IF YOU HAVE... • MS degree in Electrical Engineering, Electronics Engineering, Computer Engineering, or similar is an advantage, • Experience with high-reliability systems and dynamic environments of launch vehicles, aircraft, UAVs, and/or spacecraft, • Experience with SPI, Serial (UART, RS-232, 422, and 485), Ethernet, CAN, RTDs, Thermocouples, 4-20 mA and 0-5 VDC protocols, • Familiarity with federal, military, and industry standards, requirements, and best practices for avionics design and test (MIL-810, SMC-S-016, RCC-319/324, MIL-461, NASA-8739) If this job description resonates with you, we encourage you to apply even if you don’t meet all the requirements above. We’re interested in getting to know you and what you bring to the table! Check out our website to learn more about us and apply so that we can learn more about you! https://www.spaceworks.aero/ SEI Group is an equal opportunity employer. We prohibit discrimination and harassment of any kind based on race, color, sex, religion, sexual orientation, national origin, disability, genetic information, pregnancy, or any other protected characteristic as outlined by federal, state, or local laws.

Job DescriptionHermeus is a venture-backed defense aviation company reclaiming the lost art of rapid iterative prototyping to build the fastest aircraft in the world today. By prioritizing relentless hardware iteration, we deliver high-speed systems at the pace of the modern battlefield. We work with the Department of War to provide the high-speed capabilities our nation and its allies need to maintain a durable, asymmetric advantage. As an RF systems engineer you will be responsible for identifying RF hardware requirements, creating system architectures, and building/testing/integrating the RF solutions – both on the aircraft and ground station. This position will require strong fundamentals, wide-breadth design experience, and efficient troubleshooting skills. You’ll be responsible for high-ownership technical delivery while working with a multi-disciplinary team of engineering, manufacturing, and quality professionals.Responsibilities • Simulate/model RF hardware for communication systems and sensors/instruments., • Develop test concepts and test procedures for RF and Environmental testing, including far field and near field measurements (plus vibration, shock, thermal and thermal vacuum)., • Define hardware architecture and specifications for the RF system blocks, interfaces, and housing. Design, build and test microwave circuits and assemblies., • End-to-end design validation and testing of RF product performance. Lead and conduct troubleshooting or root cause hardware performance challenges., • Work with manufacturing and production teams on procuring and integrating quality RF module and antenna subsystems into our aircraft., • Perform data analysis of RF systems, generate documentation/slides and present results to team.Requirements, • Bachelor's degree in electrical engineering or related discipline., • 4+ years of professional experience designing and testing electrical, antenna and/or RF hardware and systems., • Experience with RF/Antenna Systems in L/S/C/Ku and Ka-Band frequencies.Preferred Skills and Experience, • Demonstrated experience working collaboratively in cross-functional teams., • Strong troubleshooting and problem diagnostic skills, • Understanding of electromagnetic propagation, impedance matching, Smith Chart, VSWR, P1dB, IIP3, NF, and etc., • Understanding of digital modulation such as QAM, BPSK, QPSK, and SOQPSK or similar., • Experience working with VNA, spectrum analyzers, RF power meters, and other relevant RF test equipment., • Experience with test equipment automation and scripting, • Strong hands-on skills including prototyping/soldering and the use of a full range of instrumentation including multimeters, oscilloscopes, current meters, etc, • Support ongoing regulatory filling including FCC, FAA, and AFTRCC., • Previous Experience on Integration and Test of an RF Systems (of any kind) with Radio as an integral part of RF Systems., • Master's degree with emphasis in Antenna, Electromagnetic theory and/or microwave circuits., • Experience using in HFSS (or similar antenna simulation tools)., • Familiarity with Antenna design, including types and tradeoffs., • EMI/EMC testing per MIL-STD-461., • Prior experience working on an airborne vehicle., • Experience in a startup or agile development environment., • Experience with Python or other scripting languages to aid automation, data analysis, etc, • Ability to travel on short notice to support test campaigns The salary information provided is a general guideline only. Hermeus takes various factors into account, including, but not limited to, the position's scope and responsibilities, the candidate's professional background, education and training, essential skills, and market and business considerations, when presenting a job offer. Salary is only one part of our total compensation and benefits package. Hermeus offers competitive salary and equity, unlimited PTO policy, paid parental leave, potential for year-end bonuses, and more! 100% employer-paid health care401k & Retirement PlansUnlimited PTOWeekly Paid Office LunchesEnd of Year BonusesFully stocked breakroomsStock Options Paid Parental Leave The salary range listed for this role is intended as a general guideline. Final compensation will be determined based on a variety of factors, including role scope and responsibilities, relevant experience, education and training, key skills, market data, and business needs. At Hermeus, compensation is only one part of our total rewards package. We offer competitive pay, equity, and a range of benefits designed to support our team. Benefits: • Health & Wellness: 100% employer-paid healthcare and pet insurance, • Financial: Competitive pay, stock options, 401(k) retirement plan, and potential year-end bonuses, • Time Off: Paid parental leave, 12 federal holidays, unlimited PTO for exempt employees, and generous accrued PTO for non-exempt employees, • Office Perks: Weekly paid office lunches and fully stocked breakrooms U.S. EXPORT CONTROL COMPLIANCE STATUS The person hired will have access to information and items subject to U.S. export controls, and therefore, must either be a “U.S. person” as defined by 22 C.F.R. § 120.62 or otherwise eligible for deemed export licensing. US persons include U.S. citizens, U.S. nationals, lawful permanent residents (green card holders), and asylees and refugees with such status granted, not pending. EQUAL OPPORTUNITYHermeus is an Equal Opportunity Employer. Employment decisions at Hermeus are based solely on merit, competence, and qualifications, without regard to race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability, or any other legally protected status. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description About the Team: The STR Sensors Division specializes in the development of advanced sensor systems, with a particular focus on airborne and surface-based radar, space-based sensing, electronic warfare, and underwater acoustics. This position is within the Space Missions and Sensing (SMS) Sector of the Sensors Division. In this sector, we develop and deliver technology to advance space-based sensing, space control, and counter-sensing missions. The Role: The SMS Sector is seeking a RF System Engineer to lead small teams to design, develop, integrate and test novel sensing and counter sensing systems for radar, electronic warfare, and signal processing systems. This position offers significant opportunities for career growth within a fast-paced and rapidly expanding company. What you will do: • Lead and work with small, multi-disciplinary teams to design, build, and test RF hardware systems. Systems are predominantly field deployable prototypes with the objective of transitioning to low-volume product systems., • Lead the team to quantify goals, system performance objectives, metrics, dependencies, and risks to guide your work., • Lead the design of RF hardware systems, tasking and guiding other engineers on your team to create drawings, select parts and components, and write specifications for components such as antennas, positioners, cables, transceiver assemblies, amplifiers, filters, etc., • Lead the integration and test of complete RF systems including antennas, feeds, waveguides, positioners, processing hardware, and the software providing system control, waveform processing, calibration, health and status functions and the user interface., • Work with mechanical engineers, software and firmware developers, system engineers, and test engineers to troubleshoot, identify, and resolve issues, • Conduct performance trade studies and analyses of proposed hardware architectures and work with Systems Engineers and other team leads to derive, develop, and verify requirements, • Develop component and system test plans and lead testing to verify system compliance with requirements and demonstrate/document system performance, • Conduct over-the-air system demonstrations, identifying hardware readiness, test architecture, performance metrics, data management, operational procedures, and performance reports, • Work with signal processing team to develop test concepts and methods, • Conduct performance analysis through simulations and real-world testing to validate system performance, • Review system effectiveness and identify opportunities to advance and/or mature subsystems and system capabilities, • Prepare documentation, design specifications, test plans, and reports Who you are: • This position requires the ability to obtain a security clearance, for which U.S. citizenship is required by U.S. Government, • BS in Electrical Engineering, Applied Mathematics, Physics, or a related technical discipline, • 10+ years experience working with RF components and subsystems, including T/R modules, rotary joints, antennas, positioners, filters, radiating structures, isolators, amplifiers, ADCs/DACs, and system signal processing, calibration and control software, • Experience with developing requirements and verification plans for complex systems and subsystems, • Design experience with RF system, subsystem and/or component analysis (frequency planning, link budget analysis, transceiver architectures, cascade analysis), • RF testing and characterization experience from component to system level, • Experience leading teams for the integration and test of RF systems including front- end hardware, back-end hardware and software, • Proficiency in MATLAB and/or Python and/or other higher-level languages, • Strong mathematical, troubleshooting, written, and verbal communication skills Even Better: • Active Secret, Top Secret, or TS/SCI Clearance, • Advanced degree in Electrical Engineering, Applied Mathematics, Physics, or a related technical discipline, • Experience with:, • RF systems engineering and technologies in one or more of the following areas: sensing and electronic warfare applications including electronic attack, electronic protection, cognitive EW, radar, and advanced ESM techniques, • EM Field Solvers (ANSYS HFSS, Sonnet), • Interacting with decision-makers and customers to translate mission needs into an end-to-end analytical solution, • RF Integrated Circuits, • RF Transceiver building blocks (power amplifiers, low-noise amplifiers, oscillators, mixers, filters), • High-power RF design and testing, • Automated or semi-automated digital and RF test set development and implementation, • Knowledge of:, • Mechanical design, • Software development, integration, and familiarity with C/C++ and Python, • Designing and debugging for EMI/EMC requirements, • FPGA hardware inference designs, • Background in designing for manufacturability, producibility, and cost constraints, • Ability to apply novel, innovative and interdisciplinary approaches to challenging engineering problems, • Ability to create and present briefings to customers and senior management to provide both high-level and deep technical solution explanations Join us and be part of a team that's making an impact at the forefront of technology and innovation. Pay Information Full-Time Salary Range: $160,000 - $220,000 The salary range listed is based on external market data. Offers are based on factors, such as but not limited to, the candidate's experience, education, training, key skills/critical skills, security clearances, and prevailing market and business conditions. STR is a growing technology company with locations near Boston, MA, Arlington, VA, near Dayton, OH, Melbourne, FL, and Carlsbad, CA. We specialize in advanced research and development for defense, intelligence, and national security in: cyber; next generation sensors, radar, sonar, communications, and electronic warfare; and artificial intelligence algorithms and analytics to make sense of the complexity that is exploding around us. STR is committed to creating a collaborative learning environment that supports deep technical understanding and recognizes the contributions and achievements of all team members. Our work is challenging, and we go home at night knowing that we pushed the envelope of technology and made the world safer. STR is not just any company. Our people, culture, and attitude along with their unique set of skills, experiences, and perspectives put us on a trajectory to change the world. We can't do it alone, though - we need fellow trailblazers. If you are one, join our team and help to keep our society safe! Visit us at www.str.us for more info. STR is an equal opportunity employer. We are fully dedicated to hiring the most qualified candidate regardless of race, color, religion, sex (including gender identity, sexual orientation and pregnancy), marital status, national origin, age, veteran status, disability, genetic information or any other characteristic protected by federal, state or local laws. If you need a reasonable accommodation for any portion of the employment process, email us at appassist@str.us and provide your contact info. Pursuant to applicable federal law and regulations, positions at STR require employees to obtain national security clearances and satisfy the requirements for compliance with export control and other applicable laws.

Job Description Senior Network Engineer Employment Type: Full Time Department: Information Technology CGS is seeking an experienced Senior Lead Network Engineer to join a team focused on the evaluation, enhancement, and maintenance of a large-scale network project that includes both wired and wireless network infrastructure and related hardware & software. The project's objectives are to evaluate the current setup of existing disparate networks and design & implement a network infrastructure that encompasses the wireless, wired, and software network requirements. The project will also include consultation regarding hardware and software necessary to facilitate the proper support for this encompassing infrastructure, and the associated systems testing, vulnerability assessments, and quality assurance needed to implement the new setup. This Network Engineer will interface with state and local governmental personnel, internal stakeholders, subject matter experts, and vendor(s) who will provide development services. CGS brings motivated, highly skilled, and creative people together to solve the government’s most dynamic problems with cutting-edge technology. To carry out our mission, we are seeking candidates who are excited to contribute to government innovation, appreciate collaboration, and can anticipate the needs of others. Here at CGS, we offer an environment in which our employees feel supported, and we encourage professional growth through various learning opportunities. Skills and attributes for success: - Operate and manage NPS network infrastructure; - Improve infrastructure monitoring and reporting capabilities based on the deployment of network management software; - Develop, maintain and deliver infrastructure documentation relating to the network infrastructure within the NPS environment; - Review current best practices and provide recommendations for architecture, design, management and operation of the network infrastructure; - Administration of the Cloudpath (or equivalent) onboarding process, monitoring and troubleshooting of wireless network health, maintenance of wireless network infrastructure, implementation of network security patches and software/firmware updates, from 0800 to 1700 PST, Monday-Friday; - Assess the NPS network infrastructure and make recommendations on improvement and optimization; - Define and conduct testing procedures for new infrastructure projects; - Implement technology solutions within the NPS network environment; - Provide design guidance on network solutions within NPS infrastructure projects; - Provide informal training and knowledge transfer to NPS resources on best practices and theory of operation relating to network products. Qualifications: - Bachelor’s Degree from an accredited college or university in Engineering, Computer Science, Business, Information systems or a related discipline. - Strong documentation skills including updating JIRA Tickets, Wiki Pages and Network Diagrams - Ability to communicate with end users, cross-organizational staff and technical assistance center. - CWNA Certification or equivalent - BCNE Certification or equivalent - Experience utilizing (RF) site survey tools such as Ekahau, RF Scanners and Wireshark packet capture software - Strong knowledge of layer 2 switching and layer 3 routing protocols; including VLANs, 802.1w, OSPF and VRRP - Strong knowledge of network security including; 802.1x, MAC Authentication, ACLs, RADIUS and Certificate of Authority (CA) - Strong knowledge of troubleshooting RF and LAN issues - Working knowledge of LINUX, MS Server 2013, VMware, etc. - A Master’s Degree in Engineering, Computer Science, Business, Information systems or a related discipline - At least 3 years experience with disaster recovery plan creation / implementation testing or projects - Experience with penetration testing, vulnerability assessment, and vulnerability testing - Experience with cyber threat information collection and analysis - Working knowledge of Agile/SCUM project management methodologies - Additional Industry certifications/licences Our Commitment: Contact Government Services (CGS) strives to simplify and enhance government bureaucracy through the optimization of human, technical, and financial resources. We combine cutting-edge technology with world-class personnel to deliver customized solutions that fit our client’s specific needs. We are committed to solving the most challenging and dynamic problems. For the past seven years, we’ve been growing our government-contracting portfolio, and along the way, we’ve created valuable partnerships by demonstrating a commitment to honesty, professionalism, and quality work. Here at CGS we value honesty through hard work and self-awareness, professionalism in all we do, and to deliver the best quality to our consumers mending those relations for years to come. We care about our employees. Therefore, we offer a comprehensive benefits package. - Health, Dental, and Vision - Life Insurance - 401k - Flexible Spending Account (Health, Dependent Care, and Commuter) - Paid Time Off and Observance of State/Federal Holidays Contact Government Services, LLC is an Equal Opportunity Employer. Applicants will be considered without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. Join our team and become part of government innovation! Explore additional job opportunities with CGS on our Job Board: https://cgsfederal.com/join-our-team/ For more information about CGS please visit: https://www.cgsfederal.com or contact: Email: info@cgsfederal.com #CJ We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description Network Engineer Employment Type: Full Time, Experienced level Department: Information Technology CGS is seeking an experienced Network Engineer to join a team focused on the evaluation, enhancement, and maintenance of a large scale network project that includes both wired and wireless network infrastructure and related hardware & software. The project's objectives are to evaluate the current setup of existing disparate networks and design & implement a network infrastructure that encompasses the wireless, wired, and software network requirements. The project will also include consultation regarding hardware and software necessary to facilitate the proper support for this encompassing infrastructure, and the associated systems testing, vulnerability assessments, and quality assurance needed to implement the new setup. This Network Engineer will interface with state and local governmental personnel, internal stakeholders, subject matter experts, and vendor(s) who will provide development services. CGS brings motivated, highly skilled, and creative people together to solve government’s most dynamic problems with cutting edge technology. To carry out our mission, we are seeking candidates that are excited to contribute to government innovation, appreciate collaboration, and can anticipate the needs of others. Here at CGS, we offer an environment in which our employees feel supported, and we encourage professional growth through various learning opportunities. Skills and attributes for success: - Operate and manage NPS network infrastructure; - Improve infrastructure monitoring and reporting capabilities based on the deployment of network management software; - Develop, maintain and deliver infrastructure documentation relating to the network infrastructure within the NPS environment; - Review current best practices and provide recommendations for architecture, design, management and operation of the network infrastructure; - Administration of the Cloudpath (or equivalent) onboarding process, monitoring and troubleshooting of wireless network health, maintenance of wireless network infrastructure, implementation of network security patches and software/firmware updates, from 0800 to 1700 PST, Monday-Friday; - Assess the NPS network infrastructure and make recommendations on improvement and optimization; - Define and conduct testing procedures for new infrastructure projects; - Implement technology solutions within the NPS network environment; - Provide design guidance on network solutions within NPS infrastructure projects; - Provide informal training and knowledge transfer to NPS resources on best practices and theory of operation relating to network products. Qualifications: - Bachelor’s Degree from an accredited college or university in Engineering, Computer Science, Business, Information systems or a related discipline. - Strong documentation skills including updating JIRA Tickets, Wiki Pages and Network Diagrams - Ability to communicate with end users, cross-organizational staff and technical assistance center. - CWNA Certification or equivalent - BCNE Certification or equivalent - Experience utilizing (RF) site survey tools such as Ekahau, RF Scanners and Wireshark packet capture software - Strong knowledge of layer 2 switching and layer 3 routing protocols; including VLANs, 802.1w, OSPF and VRRP - Strong knowledge of network security including; 802.1x, MAC Authentication, ACLs, RADIUS and Certificate of Authority (CA) - Strong knowledge of troubleshooting RF and LAN issues - Working knowledge of LINUX, MS Server 2013, VMware, etc. - A Master’s Degree in Engineering, Computer Science, Business, Information systems or a related discipline - At least 3 years experience with disaster recovery plan creation / implementation testing or projects - Experience with penetration testing, vulnerability assessment, and vulnerability testing - Experience with cyber threat information collection and analysis - Working knowledge of Agile/SCUM project management methodologies - Additional Industry certifications/licences Our commitment Contact Government Services (CGS) strives to simplify and enhance government bureaucracy through the optimization of human, technical, and financial resources. We combine cutting edge technology with world-class personnel to deliver customized solutions that fit our clients’ specific needs. We are committed to solving the most challenging and dynamic problems. For the past seven years we’ve been growing our government-contracting portfolio, and along the way we’ve created valuable partnerships by demonstrating a commitment to honesty, professionalism, and quality work. Here at CGS we value honesty through hard work and self-awareness, professionalism in all we do, and to deliver the best quality to our consumers mending those relations for years to come. We care about our employees. Therefore, we offer a comprehensive benefits package: - Health, Dental, and Vision - Life Insurance - 401k - Flexible Spending Account (Health, Dependent Care, and Commuter) - Paid Time Off and Observance of State/Federal Holidays Contact Government Services, LLC is an Equal Opportunity Employer. Applicants will be considered without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran Join our team and become part of meaningful government innovation! Explore additional job opportunities with CGS on our Job Board: https://cgsfederal.com/join-our-team/ For more information about CGS please visit: https://www.cgsfederal.com or contact: Email: info@cgsfederal.com #CJ We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description Are you passionate about solving complex thermal challenges in advanced semiconductor technologies? At Falcomm, we are transforming innovative semiconductor research into real-world solutions through high-performance, energy-efficient RF power amplifier technologies. Our mission is to deliver next-generation wireless solutions that maximize performance while improving efficiency and reliability. Falcomm is seeking an RFIC Thermal Engineer to analyze, model, and optimize thermal performance in RF integrated circuits and semiconductor packages. This role will focus on understanding heat dissipation, thermal reliability, and thermal management strategies for high-power RF devices. The position requires collaboration with RFIC designers, packaging engineers, and system teams to ensure devices operate reliably under demanding performance conditions. Responsibilities: • Develop thermal models for RFIC devices, packages, and modules to evaluate heat dissipation and temperature distribution., • Perform thermal simulations and analysis to support design optimization and reliability improvements., • Collaborate with RFIC design and packaging teams to develop thermal management strategies., • Evaluate thermal performance across different packaging technologies and materials., • Support silicon validation and characterization related to thermal performance., • Analyze thermal failure mechanisms and recommend design or process improvements., • Document analysis methods, results, and recommendations. Requirements • Bachelor’s degree in Electrical Engineering, Computer Engineering, Computer Science, or a related discipline., • 3-5 years experience with thermal analysis, modeling, or simulation in semiconductor or electronic systems., • Strong understanding of heat transfer principles and thermal management techniques for RFICs and MMICs., • Must be willing to work full-time, onsite, in Atlanta, GA. Preferred Skills: • Experience with thermal simulation tools such as ANSYS, COMSOL, or similar platforms., • Familiarity with semiconductor packaging technologies and thermal interface materials., • Experience analyzing high-power devices such as RF amplifiers or high-frequency ICs., • Strong analytical and problem-solving skills with the ability to collaborate across engineering teams. Benefits • Competitive Salary and Equity Package, • Comprehensive Health, Dental, and Vision Insurance, • 401(k) Retirement Plan, • Paid Time Off (PTO) and Sick Leave Disclosure: • Falcomm is an Equal Opportunity Employer; employment with Falcomm is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status., • Applicants wishing to view a copy of Falcomm’s Affirmative Action Plan for veterans and individuals with disabilities, or applicants requiring reasonable accommodation to the application/interview process should notify Falcomm., • To conform to U.S. Government export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State.

Job Description Senior RF Communications Engineer$140,000-$175,000 Base SalarySigning Bonus • Equity • Relocation AssistanceHybrid | Huntsville, AL | Full-Time | 9/80 ScheduleThis isn't another defense contractor job.Join a mission-focused engineering team developing next-generation RF communications and Electronic Warfare capabilities for national defense. This role is centered on the hands-on development of operational RF communications systems, including waveforms, signal processing, SDR implementation, system integration, and performance in challenged or contested RF environments. Work across SDR, radar, resilient networking, secure communications, and RF sensing technologies while contributing directly to systems from design through integration, testing, and field demonstration.Why experienced engineers choose Secmation Spend your time building, integrating, and testing advanced RF systems. Contribute to system development from early design through field deployment. Work directly with experienced engineers, DoD customers, and mission users. Solve challenging RF, Electronic Warfare, SDR, radar, and secure communications problems. Collaborate with a small, highly technical team where every engineer has real impact. Build technology designed to transition into operational use.What you'll build and contributeContribute directly to the development of advanced RF technologies that support critical defense missions. This is a highly hands-on individual-contributor role focused on communications-system design and implementation, modeling, integration, HWIL testing, field demonstration, validation, and operational deployment. A core focus is developing and evaluating RF communications capabilities that must perform in challenged or contested environments. The position does not carry technical team-lead responsibilities.You'll work across: Electronic Warfare capabilities and applications, with opportunities to support Electronic Attack, Electronic Support, Electronic Protection, and countermeasure development. Software Defined Radiosolutions, including software, embedded processing, and integration with firmware-based radio platforms and secure embedded communications systems. Tactical RF communications, SATCOM, resilient networking, radar, and RF sensing technologies. AI-enabled RF analysis, mission systems, and adaptive signal-processing capabilities as part of the broader program environment. RF algorithm development, communications-system modeling, mission simulation, and scenario development using MATLAB, Python, or comparable tools. System integration, hardware-in-the-loop testing, field testing, validation, and live customer demonstrations. Close collaboration with RF, software, hardware, cybersecurity, and systems engineers across the program.What we're looking for U.S. citizenship and an active DoD Secret security clearance arerequired, with the ability to obtain and maintain TS/SCI.Bachelor's degree in Electrical Engineering or a related technical discipline. 8+ years of relevant experience in RF systems, communications engineering, SDR, radar, Electronic Warfare, or a related field. Demonstrated hands-on experience developing RF communications systems from design through implementation, integration, test, and operational demonstration or deployment. Experience with SDR frameworks and platforms such as GNU Radio, REDHAWK, USRP/UHD, Epiq, or comparable technologies. Experience using MATLAB, Python, or comparable tools for RF modeling, simulation, algorithm development, or data analysis. Experience with C/C++ for embedded or systems-level applications. Experience supporting system integration, HWIL testing, mission simulation, field testing, validation, or customer demonstrations. Experience with one or more of the following: tactical communications, SATCOM, resilient networking, radar, RF sensing, or Electronic Warfare systems. Deep understanding of communications-system design, including waveforms, modulation/demodulation, coding, synchronization, link performance, RF/DSP tradeoffs, waveform performance analysis, and related signal-processing techniques. Ability to independently lead analysis of communications-system behavior in challenged or contested RF environments and develop technical approaches to improve friendly-system performance, resilience, and mission effectiveness or to influence/degrade adversary RF system performance. Ability to independently execute complex technical tasks while collaborating effectively within a multidisciplinary engineering team. Strong technical communication skills, including the ability to document and present findings to internal teams, program leadership, and government stakeholders.Preferred Qualifications Experience with Electronic Attack, Electronic Support, Electronic Protection, or countermeasure development. Experience integrating software with firmware-based SDR or embedded radio platforms. Experience supporting defense or government programs through field testing or operational deployment. Exposure to AI-enabled RF analysis or adaptive mission systems.Compensation & Benefits $140,000-$175,000 base salarySigning bonus Company equity Relocationassistance Hybrid 9/80 schedule with every other Friday off Paid time off and flexible work schedules Comprehensive medical, dental, and vision insurance Life and short- and long-term disability insurance 401(k) retirement benefits with company contributionWork Environment Hybrid role with on-site workrequired in Huntsville, Alabama. Flexible 9/80 work schedule supporting every other Friday off. Collaborative,fast-paced, and technically innovative environment with distributed team integration.About SecmationSecmation develops AI-enabled software, embedded cybersecurity, secure RF systems, and advanced communications technologies for the U.S. defense community. Our mission is to deliver next-generation secure technologies for Electronic Warfare, autonomous systems, and critical defense applications.Small company. Big mission. Real engineering.Equal Opportunity EmployerSecmation is proud to be an equal opportunity employer. We are committed to building a diverse and inclusive team. All qualified applicants will be considered for employment without regard to any status protected by applicable law.The salary range represents a general guideline. Secmation considers the scope and responsibilities of the position, as well as a candidate's experience, education, skills, work location, current market conditions, and other bona fide factors when determining compensation.

Job Description Are you passionate about applying machine learning to transform the future of RF hardware? At Falcomm, we are revolutionizing wireless communications by integrating AI-driven solutions into the design of our energy-efficient Power Amplifier (PA) products. We are seeking a full-time AI/CAD Software Engineer to join our team. You will lead the development of intelligent tools that enhance RF workflows, automate complex EM simulations, and accelerate the tape-out of high-performance PAs. This role sits at the intersection of software engineering, machine learning, and RF physics, perfect for a developer who wants to get close to the hardware. Responsibilities: • End-to-End ML Pipeline Development: Architect and maintain robust code for training and serving ML models that predict and optimize RF performance metrics., • PA Design Automation: Automate the creation and management of large-scale datasets derived from PA load-pull and electromagnetic (EM) simulations., • Tool Integration: Seamlessly integrate ML inference engines into existing RF EDA infrastructure to provide real-time feedback to PA designers., • Software Engineering Excellence: Establish best practices including comprehensive testing, CI/CD pipelines, and code reviews within an agile hardware team., • Cross-Functional Collaboration: Partner closely with RF/PA architects to translate complex impedance matching and linearity requirements into deployable software solutions. Requirements • Bachelor’s or Master’s degree in Computer Science, Electrical Engineering, or a related field., • 2+ years of professional experience in software engineering or machine learning., • Proficiency in Python: Advanced scripting, object-oriented programming, and automation skills., • ML Framework Expertise: Experience building models using PyTorch, TensorFlow, or scikit-learn., • Data Engineering: Strong grasp of data processing libraries (pandas, numpy, scipy) and file I/O operations., • Software Fundamentals: Solid understanding of algorithms, data structures, and version control (Git)., • RF Domain Knowledge: RF front-end architectures, or a strong understanding of RF metrics (PAE, Gain, ACLR, EVM). Preferred Skills (The "RF/PA Plus") • RF PA Domain Knowledge: Experience with Power Amplifier design and an understanding of RF PA metrics., • RF/EM Simulation Tools: Hands-on experience with Cadence Virtuoso, Ansys HFSS, or Keysight ADS., • Open Source Innovation: Experience utilizing or contributing to open-source RF/EDA alternatives (e.g., gdsfactory, KLayout, Qucs, openEMS)., • Simulation Scripting: Familiarity with automating RF simulations via SKILL, AEL, or Python APIs., • Physics-Informed ML: Interest or experience in applying ML to physics-based problems or electromagnetic modeling. Benefits • Competitive Salary and Equity Package, • Comprehensive Health, Dental, and Vision Insurance, • 401(k) Retirement Plan, • Paid Time Off (PTO) and Sick Leave DISCLOSURE • Falcomm is an Equal Opportunity Employer; employment with Falcomm is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status., • Applicants wishing to view a copy of Falcomm’s Affirmative Action Plan for veterans and individuals with disabilities, or applicants requiring reasonable accommodation to the application/interview process should notify Falcomm., • To conform to U.S. Government export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State.

Job DescriptionBenefits: • 401(k), • Dental insurance, • Health insurance, • Vision insurance About Satwave AI Satwave AI is an innovative Atlanta-based startup in the Satellite Communications industry. We design and build leading-edge flat panel array antennas and advanced antenna systems for commercial, defense, and government customers. Our multidisciplinary team of software, embedded, hardware, and RF engineers takes on hard technical problems and carries designs from concept through test, integration, and delivery. We work in a small team environment where each engineer has a direct effect on the product and on the success of the company. About the role The Program Management Professional is responsible for planning and leading our development programs from initiation through close-out. This role coordinates a multidisciplinary engineering team, manages cost, schedule, and technical performance, and serves as the primary point of contact for our customers, including defense and government customers. The ideal candidate should possess a strong background in technical program management and the experience to manage complex programs to their contract requirements. Education Bachelor’s or Master’s Degree in Engineering, Engineering Management, Business, or a related field; Master’s preferred Responsibilities · Plan, organize, and lead development programs through the full project lifecycle, including planning, execution, monitoring and controlling, and close-out · Develop project plans that define the major tasks and milestones based on scope, schedule, budget, resources, and personnel · Manage cost, schedule, and technical performance, and report status to management and customers · Develop and maintain integrated program schedules, identify the critical path, and track progress against milestones · Work with the engineering team to estimate the duration of tasks for the creation of a schedule · Plan and allocate resources and staffing across programs, and work with the engineering leads to secure the personnel needed to meet program commitments · Coordinate a multidisciplinary team across software, embedded, hardware, and RF engineering to meet program requirements · Work with agile development teams, and understand how a new requirement, enhancement, or defect affects program scope, schedule, and system architecture · Identify, track, and mitigate program risks, and maintain a risk register · Manage program scope, requirements, and changes, and control the program baseline · Serve as the primary point of contact for customers, and manage expectations, deliverables, and communications · Prepare for and lead program reviews such as the System Requirements Review, Preliminary Design Review, and Critical Design Review · Manage compliance with the contract requirements defined in the Statement of Work or Performance Work Statement · Track and deliver Contract Data Requirements List (CDRL) items in accordance with their Data Item Descriptions and their required delivery dates · Track program budgets and support earned value management where required · Coordinate the procurement of long lead items with the supply chain and vendors · Assure that program deliverables meet the quality requirements before delivery · Maintain program documentation, action items, and meeting records · Manage program close-out, including final deliverables, documentation, and contract completion · Support proposal efforts, including reviewing the Statement of Work or Performance Work Statement and estimating the cost and schedule for new work Skills and Experience · 7 or more years of experience in program or project management, with time spent on engineering or hardware development programs · Experience managing government or defense programs, including DoD contracts and milestone reviews (required) · A Project Management certification such as the PMP (required) · Familiarity with program management best practices, including scheduling, risk management, and earned value management · Experience developing and maintaining integrated master schedules with tools such as Microsoft Project or Primavera · Experience planning resources and staffing across concurrent programs · Experience working with agile development teams and their sprint, release, and issue tracking processes · Familiarity with government contract types, the Statement of Work and the Performance Work Statement, and CDRL deliverables and their Data Item Descriptions · Ability to read and understand technical requirements and communicate effectively with a multidisciplinary engineering team · Experience coordinating cost, schedule, and technical performance across multiple teams · Excellent written and verbal communication skills · Willingness to travel occasionally for customer meetings, program reviews, and field testing · Must be a U.S. person as defined by ITAR and EAR, due to work on export controlled technology · Ability to work independently and to lead others

Job ID: 01861333Posted: Posted 30+ Days AgoStart Date: 2026-07-27Location: US-GA-ATLANTA-100 ~ 100 Galleria Pkwy SE ~ GALLERIACountry: United States of AmericaTime Type: Full timeDate Posted:2026-07-27 Country:United States of America Location:US-GA-ATLANTA-100 ~ 100 Galleria Pkwy SE ~ GALLERIA P

Job DescriptionThe Problem As Flock expands our fleet of autonomous Unmanned Aerial Systems (UAS) and docking infrastructure, ensures 24/7 critical field reliability requires high-integrity hardware-software integration. Operating in unpredictable real-world environments without constant on-site oversight means our drones and ground stations rely on seamless radio connectivity, pristine battery systems, and immediate diagnostic triage. You will serve as the technical bridge between field operations and core engineering by diving into telemetry, leading hardware bring-up, and ensuring field data directly drives our next generation of autonomous hardware. What You'll Own Diagnose & Triage Complex Fleet Issues Telemetry & Analytics Monitoring in post-flight telemetry using diagnostic tools like Foxglove and Grafana, establishing performance KPIs and real-time visibility dashboards for vehicle heartbeats. Hardware Bring-Up & Field Validation by leading hands-on bring-up, QA testing, and field validation of new docking hardware and drone airframes using industrial automation principles to ensure round-the-clock reliability. Engineering Feedback Loops by translating edge-case hardware failures and signal into clear, actionable bug reports and design feedback for the core Engineering team. Maintenance & Support Playbooks by developing, maintaining, and continuously refining preventative inspection schedules, technical SOPs, and troubleshooting guides to scale our global fleet capabilities. What This Role is Not This isn't a desk-only or purely remote role. You will work hands-on with physical hardware at our Atlanta facility and deploy directly to client sites (up to 25% travel). This is not a high-level software development job. You won't write core drone flight software, build cloud platforms, or engineer embedded firmware from scratch; your focus is deep technical triage, telemetry analysis, and hardware-system integration. This isn't a transactional help-desk ticket pusher. You are an engineer who owns the technical lifecycle, failure mode analysis, and continuous feedback loop between live operations and design teams. What You Bring Education & Background: Bachelor’s Degree in Mechanical Engineering, Electrical Engineering, Robotics, or proven hands-on experience in the UAS/Robotics space. Domain Experience: 3+ years troubleshooting and maintaining Unmanned Aerial Systems, including multi-rotor flight hardware and autopilot firmware. Diagnostics Stack: Hands-on proficiency with hardware diagnostic tools (Multimeters, Oscilloscopes) and telemetry/monitoring suites (Grafana, Foxglove, or similar). Communication & RF Infrastructure: Deep familiarity with GPS, LTE, RF communications systems, and signal strength/throughput troubleshooting between UAS hardware and ground infrastructure. Technical Translation: Strong written and verbal communication skills with a proven track record of converting complex hardware failures into clean engineering documentation. Nice to Haves: Working knowledge of radar systems, familiarity with Battery Management Systems (BMS) and safe handling of Li-ion chemistries, and an FAA Part 107 Remote Pilot Certificate (required upon hire). Logistics Location & Travel: Onsite at our Atlanta-based manufacturing facility for hands-on collaboration, with up to 25% travel expected to client sites. Compensation In this role, you'll receive a starting salary between $100,000 and $140,000 as well as Flock Stock Options. Base salary is determined by job-related experience, education/training, as well as market indicators. Your recruiter will discuss this in depth with you during our first chat. Why Flock 💚 Every community deserves to be safe. Flock builds the technology that makes that real: last year we supported over 1 million criminal investigations and helped locate more than 10,000 missing people. We're 1,700 people building the impossible with over $1B in funding, and the expectations are high on purpose. If you want a role where the stakes are real and the pace matches, this is it. 📍Some problems get solved faster in the same room, so we prioritize candidates in Atlanta and Boston. Hub-based roles mean real in-person time with your coworkers. Remote roles exist, and when a posting is open to remote work, it says so. 🌟 the impossible takes every kind of mind. Flock is an equal opportunity employer, and we know the best solutions come from diverse perspectives, experiences, and skills working together with mutual respect. Everyone is welcome to apply. If you need assistance or an accommodation due to a disability, email recruiting@flocksafety.com; your information stays confidential and is used only to arrange the right accommodation for your interviews. 💰 On compensation: we pay fairly for the work. Base salary is determined by job-related experience, education, training, and market indicators. The range in this posting covers base salary only and doesn't include equity, sales bonus plans where applicable, or benefits. The range may be adjusted over time, and this posting may span more than one career level. 📣 One last thing: all legitimate communication from Flock comes from an email ending in @flocksafety.com or noreply@ashbyhq.com. We never make offers through messaging apps or third parties, and we never request payment or sensitive personal information during hiring. If you encounter suspicious outreach about a Flock role, report it to recruiting@flocksafety.com. Compensation Range: $100K - $140K

Job Description About the Team: The Sensors Division at STR focuses on technology development for advanced sensor systems, particularly in the areas of airborne/surface-based radar, electronic warfare, underwater acoustics, hyperspectral imaging, and EO/IR sensing. Within this role, we perform work on full system prototypes, experiment campaigns and technology component development. Development roles within the Sensors Division include RF analog/digital hardware, acoustic hardware, signal processing algorithms, machine learning algorithms, tracking/fusion, as well as real-time embedded processor implementation. Within the Sensors Division, the Real-time Architectures, Integration and Demonstration (RAID) Group focuses on transition of algorithms from concept to real-time software, providing open architecture expertise, and facilitating integration of capabilities for experimentation, test, and deployment. The Role: The RAID Group is seeking a Lead Software Engineer with demonstrated expertise in GPU programming and optimization to design, develop, and implement real-time software for RF sensor systems compliant with open architecture standards. You will work as part of focused teams to transition advanced signal processing algorithms from research prototypes into production-quality software for embedded and distributed computing platforms. You will be responsible for architecting software components, implementing real-time processing pipelines, and optimizing performance for resource-constrained systems. A successful candidate will have experience developing high-performance C/C++ software for sensor systems. Strong understanding of real-time systems, multithreaded programming, and signal processing are essential. Experience with open architecture frameworks and standards is highly desired. Strong technical, interpersonal, and communication skills are important for working in collaborative, multi-disciplinary teams. What you will do: • Design and implement real-time software components for RF sensor signal processing systems, • Develop and optimize GPU-accelerated algorithms for signal processing pipelines using CUDA, • Translate algorithm specifications (MATLAB, Python) into optimized C/C++ implementations, • Architect software components compliant with open architecture standards, • Integrate and optimize code for real-time performance on multi-core CPUs and GPUs with strict latency requirements, • Develop unit tests, integration tests, and performance benchmarks; promote testing best practices, • Document software designs, APIs, implementation details, and technical reports, • Contribute to briefings and presentations for program reviews and customer meetings, • Collaborate with algorithm developers, systems engineers, RF hardware engineers, and integration teams across programs, • Contribute to proposal development efforts including technical approach, • Perform peer reviews and suggest next steps for technical work, • Support approximately 20% travel for integration events, customer meetings, and field demonstrations Who you are: • Ability to obtain and retain a Secret Security Clearance, for which U.S Citizenship is needed by the U.S government, • PhD + 2 years, MS + 5 years, or BS + 7 years in Computer Science, Computer Engineering, Electrical Engineering, or related field, • Experience with GPU programming and optimization (CUDA), • Strong proficiency in C/C++ for high-performance, real-time applications, • Experience with Linux and embedded systems development, • Experience with real-time signal processing, • Experience with multithreaded programming, thread safety, and synchronization, • Experience with version control systems (Git) and collaborative development practices, • Good technical writing and communication skills Even Better: • Active Security Clearance at the Secret or Top Secret level (strongly preferred due to clearance processing time), • Proficiency in MATLAB and/or Python for algorithm prototyping, • Experience with open architecture standards and frameworks, • Understanding of RF signal processing concepts, • Familiarity with containerization, CI/CD pipelines, and DevOps practices, • Prior contributions to proposal development and technical writing Pay Information Full-Time Salary Range: $157,000 - $223,000 The salary range listed is based on external market data. Offers are based on factors, such as but not limited to, the candidate's experience, education, training, key skills/critical skills, security clearances, and prevailing market and business conditions. STR is a growing technology company with locations near Boston, MA, Arlington, VA, near Dayton, OH, Melbourne, FL, and Carlsbad, CA. We specialize in advanced research and development for defense, intelligence, and national security in: cyber; next generation sensors, radar, sonar, communications, and electronic warfare; and artificial intelligence algorithms and analytics to make sense of the complexity that is exploding around us. STR is committed to creating a collaborative learning environment that supports deep technical understanding and recognizes the contributions and achievements of all team members. Our work is challenging, and we go home at night knowing that we pushed the envelope of technology and made the world safer. STR is not just any company. Our people, culture, and attitude along with their unique set of skills, experiences, and perspectives put us on a trajectory to change the world. We can't do it alone, though - we need fellow trailblazers. If you are one, join our team and help to keep our society safe! Visit us at www.str.us for more info. STR is an equal opportunity employer. We are fully dedicated to hiring the most qualified candidate regardless of race, color, religion, sex (including gender identity, sexual orientation and pregnancy), marital status, national origin, age, veteran status, disability, genetic information or any other characteristic protected by federal, state or local laws. If you need a reasonable accommodation for any portion of the employment process, email us at appassist@str.us and provide your contact info. Pursuant to applicable federal law and regulations, positions at STR require employees to obtain national security clearances and satisfy the requirements for compliance with export control and other applicable laws.

Job Description Are you passionate about designing advanced semiconductor layouts that enable next-generation wireless technologies? At Falcomm, we are transforming innovative semiconductor research into real-world solutions through high-performance, energy-efficient RF power amplifier technologies. Our mission is to deliver cutting-edge wireless solutions that push the boundaries of efficiency, integration, and performance. Falcomm is seeking a Senior RFIC Layout Engineer to support the physical implementation of RF and mmWave integrated circuits. This role focuses on developing high-quality IC layouts for RF front-end circuits while ensuring compliance with foundry design rules and performance requirements. The position requires close collaboration with RFIC designers, verification teams, and fabrication partners to ensure successful tape-out and silicon performance. Responsibilities: • Develop and implement layout for RF and analog integrated circuits including amplifiers, mixers, oscillators, and supporting RF blocks., • Work closely with circuit designers to translate schematics into optimized physical layouts that meet performance and area requirements., • Ensure layouts comply with foundry design rules and support design verification processes including DRC, LVS, and parasitic extraction., • Optimize layout for RF performance, signal integrity, matching, and noise isolation., • Support tape-out preparation and coordinate with fabrication partners during the manufacturing process., • Collaborate with cross-functional teams including RF design, packaging, and testing., • Document layout methodologies and contribute to best practices for RFIC physical design. Requirements • Bachelor’s degree in Electrical Engineering, Computer Engineering, Computer Science, or a related discipline., • 5+ years of experience in RFIC or analog IC layout design., • Must be willing to work full-time, onsite, in Atlanta, GA. Preferred Skills: • Familiarity with advanced semiconductor processes such as SOI and GaN., • Understanding of RF layout techniques including matching, shielding, guard rings, and isolation structures., • Experience supporting tape-out and post-silicon validation. Benefits • Competitive Salary and Equity Package, • Comprehensive Health, Dental, and Vision Insurance, • 401(k) Retirement Plan, • Paid Time Off (PTO) and Sick Leave Disclosure: • Falcomm is an Equal Opportunity Employer; employment with Falcomm is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status., • Applicants wishing to view a copy of Falcomm’s Affirmative Action Plan for veterans and individuals with disabilities, or applicants requiring reasonable accommodation to the application/interview process should notify Falcomm., • To conform to U.S. Government export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State.

Job Description About the Team: The Real-time Architectures, Integration, and Demonstration (RAID) Group focuses on transition of algorithms from concept to real-time software, providing open architecture expertise, and facilitating integration of capabilities for experimentation, test, and deployment. The Role: As a Senior Software Engineer for Integration and Test you will focus on supporting the development, integration, and validation of real-time RF sensor software systems. You will work as part of a multi-disciplinary team to implement software components, integrate algorithms into open architecture frameworks, and develop test infrastructure to validate system performance. This role emphasizes hands-on software development, open system integration, integrating software components across distributed architectures and with hardware platforms, and rigorous testing of real-time applications. What you will do: • Implement software components for real-time sensor systems in C/C++, • Integrate signal processing algorithms into open architecture software frameworks, • Develop and execute integration tests and system-level validation tests, • Debug software issues in real-time, multi-threaded, and distributed systems, • Work with senior engineers to translate algorithm specifications into software implementations, • Develop test scripts and automated testing infrastructure, • Perform hands-on lab work with signal processing hardware and test equipment, • Document software designs, test procedures, results, and technical reports, • Support system demonstrations and field testing activities, • Participate in code reviews and contribute to software quality improvements, • Collaborate with cross-functional teams including algorithm developers, systems engineers, and integration staff, • Support approximately 20% travel for integration events, field testing, and customer demonstrations Who you are: • Active clearance at the Secret level with ability to obtain and maintain a Top Secret security clearance, for which U.S. citizenship is a government requirement, • BS, MS, or PhD in Computer Science, Computer Engineering, Electrical Engineering, or a related field with relevant experience depending on degree (BS +5 years, MS +3 years, PhD +1 year), • Experienced in software development (internships and academic projects count), • Strong proficiency in C/C++ programming, • Experience with version control systems (Git), • Experience with Linux, • Strong debugging and troubleshooting skills, • Strong willingness to learn signal processing and real-time embedded systems Even Better: • Active Top Secret clearance (TS/SCI preferred), • Effective written and verbal communication skills, • Proficiency in Python or MATLAB, • Experience with hands-on hardware testing and lab equipment, • Coursework or experience in signal processing, • Experience with real-time or embedded software development, • Knowledge of multithreaded programming and synchronization, • Understanding of open architecture principles and standards Join us and be part of a team that's making an impact at the forefront of technology and innovation. Pay Information Full-Time Salary Range: $134,000 - $184,000 The salary range listed is based on external market data. Offers are based on factors, such as but not limited to, the candidate's experience, education, training, key skills/critical skills, security clearances, and prevailing market and business conditions. STR is a growing technology company with locations near Boston, MA, Arlington, VA, near Dayton, OH, Melbourne, FL, and Carlsbad, CA. We specialize in advanced research and development for defense, intelligence, and national security in: cyber; next generation sensors, radar, sonar, communications, and electronic warfare; and artificial intelligence algorithms and analytics to make sense of the complexity that is exploding around us. STR is committed to creating a collaborative learning environment that supports deep technical understanding and recognizes the contributions and achievements of all team members. Our work is challenging, and we go home at night knowing that we pushed the envelope of technology and made the world safer. STR is not just any company. Our people, culture, and attitude along with their unique set of skills, experiences, and perspectives put us on a trajectory to change the world. We can't do it alone, though - we need fellow trailblazers. If you are one, join our team and help to keep our society safe! Visit us at www.str.us for more info. STR is an equal opportunity employer. We are fully dedicated to hiring the most qualified candidate regardless of race, color, religion, sex (including gender identity, sexual orientation and pregnancy), marital status, national origin, age, veteran status, disability, genetic information or any other characteristic protected by federal, state or local laws. If you need a reasonable accommodation for any portion of the employment process, email us at appassist@str.us and provide your contact info. Pursuant to applicable federal law and regulations, positions at STR require employees to obtain national security clearances and satisfy the requirements for compliance with export control and other applicable laws.

Job Description About the Team: The Sensors Division at STR focuses on technology development for advanced sensor systems and platforms in support of national security. We have a particular focus on airborne/surface/space-based radar, electronic warfare, underwater acoustics, hyperspectral imaging, and EO/IR sensing. We work on full system prototypes, experiment campaigns, and next generation technology components. Specific technical areas include RF analog/digital hardware, acoustic hardware, signal processing algorithms, machine learning algorithms, tracking/fusion, autonomous systems, as well as real-time embedded processor implementation. The Systems Autonomy, Analysis, and Modeling (SAAM) Group within the Sensors Division uses modeling and simulation (M&S) to analyze system capabilities, develop enabling algorithms, and take these integrated systems through test. We focus on the capabilities and limitations of ground, air, surface, and space sensing and counter-sensing platforms and the resource management of these assets to assure the mission success of US air and space assets. SAAM also leverages the emerging use of autonomy and Artificial Intelligence in uncrewed systems and techniques to collect, fuse, and understand sensor data across full systems of systems to assure mission success. SAAM is developing software and hardware tools and datasets to support these analyses, including algorithms, processing chains, and scenarios to inform and deploy onto both prototype demonstration systems & operational systems. Our main customer focus is on Air Force, Navy, and DARPA research programs. The Role: As an Autonomy Software Engineer in the SAAM group, you will work as a part of high-performing teams focused on autonomy development and mission systems integration within demanding customer environments. You will ensure that these teams are executing at a high level to develop robust, fielded solutions that also lay the groundwork for future programs to build on. What you will do: • System Development: leverage mature hardware systems and develop code to integrate them together, collaborating with SMEs across STR to leverage advanced algorithms where needed, • System Test: work closely with test leads in the SAAM group to leverage testing capabilities across M&S and live test, leveraging Live-Virtual-Constructive (LVC) infrastructure, • Leadership: lead small, focused teams to implement and test real-time applications featuring open architecture software principles, implementing real-time systems in Modern C++ from verified algorithms written in higher-level languages such as MATLAB, • Customer engagement: support potential and current customer discussions to better understand their requirements and shape product development Who you are: • Self-motivated with demonstrated ability to excel under limited guidance, • Strong proficiency in modern C++ development, including multi-threaded applications, • Experience with test-driven development and CI/CD practices, • Familiarity with cross-platform development (Windows, Linux, iOS) and version control workflows, • Experience with hardware/software integration, • Minimum of 2 years relevant experience with PhD, 5 years with MS, or 7 years with BS, • Ability to obtain and maintain a secret security clearance, for which U.S citizenship is needed by the U.S government Even Better: • Active Secret or Top Secret security clearance, • 5+ years of C++ programming experience with open architecture systems, • Experience with safety-critical software architectures, • Experience with real-time software development and algorithm optimization, • Familiarity with network protocols and debugging, • Familiarity with relevant open standards such as OMS/UCI and A-GRA, • Experience with software quality tools (static/dynamic analysis, automated testing frameworks) Pay Information Full-Time Salary Range: $174,000 - $225,000 The salary range listed is based on external market data. Offers are based on factors, such as but not limited to, the candidate's experience, education, training, key skills/critical skills, security clearances, and prevailing market and business conditions. STR is a growing technology company with locations near Boston, MA, Arlington, VA, near Dayton, OH, Melbourne, FL, and Carlsbad, CA. We specialize in advanced research and development for defense, intelligence, and national security in: cyber; next generation sensors, radar, sonar, communications, and electronic warfare; and artificial intelligence algorithms and analytics to make sense of the complexity that is exploding around us. STR is committed to creating a collaborative learning environment that supports deep technical understanding and recognizes the contributions and achievements of all team members. Our work is challenging, and we go home at night knowing that we pushed the envelope of technology and made the world safer. STR is not just any company. Our people, culture, and attitude along with their unique set of skills, experiences, and perspectives put us on a trajectory to change the world. We can't do it alone, though - we need fellow trailblazers. If you are one, join our team and help to keep our society safe! Visit us at www.str.us for more info. STR is an equal opportunity employer. We are fully dedicated to hiring the most qualified candidate regardless of race, color, religion, sex (including gender identity, sexual orientation and pregnancy), marital status, national origin, age, veteran status, disability, genetic information or any other characteristic protected by federal, state or local laws. If you need a reasonable accommodation for any portion of the employment process, email us at appassist@str.us and provide your contact info. Pursuant to applicable federal law and regulations, positions at STR require employees to obtain national security clearances and satisfy the requirements for compliance with export control and other applicable laws.

Job Description RF Engineer – Advanced RF Measurement Systems Location: Kennesaw, GA (Lab-Based + Limited Travel) Compensation: Competitive Base Salary + Benefits Employment Type: Full-Time About the Role Our client is seeking a hands-on RF Engineer to design, build, and support sophisticated RF measurement systems used for antenna characterization, radar cross-section (RCS) testing, and electromagnetic materials analysis. This is an end-to-end engineering role—ideal for someone who enjoys taking systems from concept to reality, working directly with hardware, and supporting real-world measurement environments. What You’ll Be Working On Design Complete RF Measurement Systems Build VNA-centric systems for antenna testing, RCS measurement, and EM material characterization. Architect RF Signal Chains Design and integrate RF front-ends including switches, amplifiers, couplers, filters, and calibration paths. Build & Validate Systems Assemble hardware, integrate mechanical positioners and scanners, perform calibration, and verify system performance. Solve Complex Measurement Problems Debug RF, mechanical, and software issues to ensure stable, repeatable, high-quality measurements. Install & Support Systems Support on-site installations, train users, and provide post-deployment troubleshooting. Create Clear Documentation Produce wiring diagrams, test procedures, calibration workflows, and user guides to support long-term system reliability. What We’re Looking For Bachelor’s degree in Electrical Engineering or equivalent hands-on experience Strong RF/microwave fundamentals (S-parameters, matching, noise, dynamic range) Proven experience working with Vector Network Analyzers Hands-on comfort with RF lab tools and precision connectors Methodical troubleshooting mindset and strong documentation habits Ability to manage multiple technical workstreams independently Bonus Experience (Not Required) Antenna measurement systems (near-field, far-field, anechoic chambers) RCS measurement concepts and calibration techniques EM materials testing and parameter extraction RF front-end design experience Test automation or instrumentation control (Python, MATLAB, LabVIEW, etc.) Familiarity with major RF instrumentation vendors What Success Looks Like You can turn a vague measurement requirement into a robust, repeatable system You’re just as comfortable tightening a precision connector as you are tuning a calibration workflow Customers trust you during installs and rely on your technical judgment Travel & Environment Primarily lab-based Occasional travel for installations and customer support (≈10%)

Job Description Are you passionate about supporting innovation in the semiconductor industry? At Falcomm, we are transforming advanced semiconductor technologies into real-world solutions through high-performance, energy-efficient RF power amplifier products. Our mission is to deliver cutting-edge wireless solutions that push the boundaries of performance and efficiency. Falcomm is seeking an IT/EDA Systems Engineer who will sit at the intersection of IT infrastructure, Linux engineering environments, and semiconductor design toolchains. A successful candidate will oversee the reliability and scalability of enterprise infrastructure while supporting EDA tools, simulation clusters, and Linux compute environments used by engineering teams. Responsibilities: • Manage enterprise IT infrastructure including servers, storage, networking, and virtualization environments., • Deploy, maintain, and optimize EDA environments used for RFIC and semiconductor design, • Collaborate with the external Managed Service Provider (MSP) to maintain IT systems, troubleshoot issues, and ensure timely resolution of support tickets., • Administer Cadence design tools and related toolchains, • Manage EDA license servers and license utilization, • Maintain Linux-based compute clusters used for simulation and verification, • Optimize compute infrastructure for EDA simulation workloads, • Manage Linux infrastructure (RHEL / Ubuntu / CentOS) supporting engineering teams, • Maintain high-performance storage systems used for design data, • Develop scripts and automation to improve infrastructure reliability and operational efficiency, • Automate system provisioning, configuration, and monitoring using Python, Bash, or similar tools, • Maintain corporate IT infrastructure including servers, networking, and cloud services, • Manage authentication systems, backups, and disaster recovery, • Support internal teams with infrastructure needs Requirements • Bachelor’s degree in Computer Science, Electrical Engineering, IT, or related field, • 3-5+ years of experience managing IT infrastructure or engineering compute environments, • Strong Linux system administration experience, • Experience supporting EDA tools, • Experience managing software license servers, • Strong understanding of:, • Networking, • Storage systems, • Linux environments, • Engineering compute infrastructure, • Strong troubleshooting and problem-solving skills, • Must be willing to work full-time, onsite, in Atlanta, GA. Preferred Skills: • Experience supporting RFIC, ASIC, or semiconductor design teams, • Experience with HPC clusters or distributed compute systems, • Experience with automation tools and scripting (Python, Bash, Ansible), • Familiarity with CI/CD and infrastructure automation Benefits • Competitive Salary and Equity Package, • Comprehensive Health, Dental, and Vision Insurance, • 401(k) Retirement Plan, • Paid Time Off (PTO) and Sick Leave Disclosure: • Falcomm is an Equal Opportunity Employer; employment with Falcomm is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status., • Applicants wishing to view a copy of Falcomm’s Affirmative Action Plan for veterans and individuals with disabilities, or applicants requiring reasonable accommodation to the application/interview process should notify Falcomm., • To conform to U.S. Government export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State.

Job Description Hermeus is a venture-backed defense aviation company reclaiming the lost art of rapid iterative prototyping to build the fastest aircraft in the world today. By prioritizing relentless hardware iteration, we deliver high-speed systems at the pace of the modern battlefield. We work with the Department of War to provide the high-speed capabilities our nation and its allies need to maintain a durable, asymmetric advantage. About The Role: The Mission Systems Engineering team develops the Mission Management System—the software platform connecting mission subsystems, autonomy services, operator interfaces, communications links, and telemetry across Hermeus aircraft and ground systems. As a Senior/Principal Mission Software Engineer, you will architect, build, integrate, and validate critical portions of this platform. You will work across software, avionics, communications, autonomy, simulation, and flight operations to solve complex problems in distributed, hardware-connected environments. This is a hands-on technical leadership role with the opportunity to define foundational architecture and directly influence how Hermeus aircraft are commanded, monitored, tested, and expanded with new mission capabilities. Responsibilities: Own major Mission Management System capabilities from architecture through integration, testing, and operational use Design and develop high-performance C++ software for command and control, telemetry, mission workflows, and subsystem coordination Define scalable architectures, interfaces, APIs, protocols, and message schemas Integrate autonomy services, sensors, payloads, radios, tactical datalinks, and third-party systems Make technical decisions involving performance, reliability, latency, fault tolerance, and extensibility Diagnose complex issues across distributed software, networks, embedded hardware, avionics, and communications systems Partner with systems, avionics, autonomy, networking, flight-test, and operations teams Build and improve simulation, software-in-the-loop, hardware-in-the-loop, and system-integration environments Lead design reviews, code reviews, technical trade studies, and integration activities Identify technical risks and drive solutions in environments where requirements are still evolving Mentor engineers and establish strong software architecture and development practices Support ground and flight-test campaigns, including real-time troubleshooting Requirements: Bachelor’s degree in Computer Science, Computer Engineering, Electrical Engineering, Software Engineering, or a related field 7+ years of professional software-development experience for Senior-level consideration 10+ years of relevant experience, or an equivalent record of technical leadership and impact, for Principal-level consideration Advanced proficiency with modern C++, including C++17 or newer Experience designing and delivering complex, production-quality software systems Strong knowledge of concurrency, memory management, software architecture, and performance-oriented development Experience with distributed, real-time, embedded, robotic, aerospace, or other hardware-connected systems Experience with TCP, UDP, multicast, and socket-level network programming Ability to define architectures, interfaces, protocols, and system boundaries in ambiguous environments Experience integrating software with hardware, external services, or independently developed subsystems Strong debugging skills across software, networking, and hardware interfaces Ability to clearly communicate technical decisions, risks, and tradeoffs across multidisciplinary teams Demonstrated ownership through design, implementation, integration, testing, and deployment Preferred Skills and Experience: Experience with mission systems, command-and-control software, mission planning, ground-control systems, autonomy platforms, or operator-facing applications Aerospace, defense, robotics, autonomous vehicle, or spacecraft experience Experience with RF communications, SATCOM, line-of-sight radios, or tactical datalinks Familiarity with publish/subscribe architectures or middleware such as DDS, ZeroMQ, ActiveMQ, or Kafka Experience integrating third-party sensors, payloads, autonomy services, radios, or mission subsystems Knowledge of avionics architectures, aircraft networks, telemetry, and command-and-control workflows Linux software development and deployment experience Experience developing fault-tolerant or degraded-mode behaviors for distributed systems Experience with simulation, SIL, HIL, system-integration labs, ground tests, or flight tests Familiarity with standards such as DO-178C, ARINC, FACE, OMS/UCI, STANAG, or MIL-STD Experience establishing technical direction or influencing execution across multiple teams Experience working in a startup or rapid-prototyping environment Senior - 150,000 - 200,000 Principal - 170,00 - 230,000 U.S. Citizenship Requirement Due to U.S. Government requirements associated with access to Controlled Cryptographic Items (CCI) and related controlled information, this position is limited to U.S. citizens. U.S. permanent residents (Green Card holders) are not eligible for this role. The salary range listed for this role is intended as a general guideline. Final compensation will be determined based on a variety of factors, including role scope and responsibilities, relevant experience, education and training, key skills, market data, and business needs. At Hermeus, compensation is only one part of our total rewards package. We offer competitive pay, equity, and a range of benefits designed to support our team. Benefits: • Health & Wellness: 100% employer-paid healthcare and pet insurance, • Financial: Competitive pay, stock options, 401(k) retirement plan, and potential year-end bonuses, • Time Off: Paid parental leave, 12 federal holidays, unlimited PTO for exempt employees, and generous accrued PTO for non-exempt employees, • Office Perks: Weekly paid office lunches and fully stocked breakrooms U.S. EXPORT CONTROL COMPLIANCE STATUS The person hired will have access to information and items subject to U.S. export controls, and therefore, must either be a “U.S. person” as defined by 22 C.F.R. § 120.62 or otherwise eligible for deemed export licensing. US persons include U.S. citizens, U.S. nationals, lawful permanent residents (green card holders), and asylees and refugees with such status granted, not pending. EQUAL OPPORTUNITY Hermeus is an Equal Opportunity Employer. Employment decisions at Hermeus are based solely on merit, competence, and qualifications, without regard to race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability, or any other legally protected status. #LI-JC3 We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

The role is responsible for ensuring reliable data exchange, interface performance, system availability, interoperability compliance, and operational support across healthcare organizations and connected systems. Monitor system health, performance, availability, and uptime to ensure reliable exchang

This role involves both on-site and remote service, ensuring the reliability and performance of our systems. Perform startup, commissioning, service, and preventive maintenance on LayerZero equipment:. Field service work is performed at customer sites through the US and Canada.

Field Service Technicians interface with our customers daily, keeping their systems up and running, ensuring optimal performance. We are looking for a Field Service Technicians perform all customer support duties and responsibilities relating to KPI products, including preventative maintenance, corr

You will collaborate closely with engineering, product, customer engineering, and site reliability teams to drive continuous improvement across the entire support lifecycle. Coordinate with site reliability engineers to proactively reduce reactive customer issues. Provide structured product feedback

The Field Service Technician may also perform equipment refurbishment, installation, relocation, discontinuance, product level engineering and configuration changes, upgrades and/or modifications, to products using well established documentation and procedures. Travel within assigned territory or na

Perform preventative maintenance (oil change, valve adjustment, lube and check.

An individual may be required to perform twisting activities, dependent on the type of position they need to place themselves in while performing his/her job duties. The Associate Field Service Technician may also perform equipment refurbishment, installation, relocation, discontinuance, product lev

To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. To perform this job successfully, an individual should have strong PC skills, proficient in MS Office Word, Excel, and MS. Journeyman Electrician/ HVAC/Commissioning Certification or License f

While performing the responsibilities of the job, these work environment characteristics are representative of the environment the job holder will encounter. Reasonable accommodations may be made to enable people with disabilities to perform the essential functions of the job. While performing the d

Schneider Electric - - Responsibilities: Pre-site, startup, repair, preventive maintenance on equipment; Diagnose and repair HVAC/Cooling equipment in customer sites; Complete field service reports and expense reports; Travel regionally/countrywide for local or national support; Assist Field Project

Perform Short Circuit, Protective Device Coordination, and Arc Flash (SCCAF) studies using SKM Power Tools or similar software. Coordinate with design engineers to ensure alignment between study models and construction documents. Hands-on experience performing SCCAF studies using SKM Power Tools (or

Schneider Electric - - Responsibilities: Perform on-site assembly, startup, diagnostic, repair and preventive maintenance on HVAC/R equipment; Troubleshoot with customers and third-party partners; Complete field service and expense reports; Assist Field Project Manager on startups and escalations; T

EPC or engineering consulting experience. Bachelor's degree in Electrical Engineering. Strong understanding of electrical substation engineering and design principles.

The field service technician performs different types of support at the customers location, such as troubleshooting, setup, and installation of systems and equipment. Perform other duties assigned by the manager.

Experience with industry-specific engineering and design software. Professional Engineer (PE) license. EPC or engineering consulting experience.