Trabajos sheet metal en Hackensack, New JerseyCrear alertas

Job Description Roofing Service Technician We are looking for a Roofing Service Technician to join our organization. If you are a person with a strong work ethic, and basic knowledge of construction or roofing who wants to become a commercial roofing professional and join our team. We will provide extensive paid training for you to be able make repairs and/or repair recommendations, perform evaluations and Roofing Preventative Maintenance to low slope roofing systems. You must be professional, presentable, and a good communicator as you will be dealing directly with clients daily. • Excellent earnings - $23.00- $29.00 per hour (pay is based on experience; on average our Service Technicians make $77,000+ per year)., • Forty & more hours per week (with overtime work and pay of 10-15 hours per week)., • Three (3) annual bonus opportunities (safety bonus of up to $1,500.00 per year, individual performance bonus & company bottom-line bonus)., • GREAT BENEFITS- Paid Time Off, Health Insurance, Dental, Vision Care benefits, Free life insurance policy, and 401K plan., • Opportunity to advance, learn, grow, and increase your earning potential., • Training available for experienced construction candidates., • A military-friendly and veteran-friendly employer. What you'll do:, • Always follow safety on the job and while driving., • Inspect problem roofs, perform roof repair, and preventative maintenance., • Communication: Speaks clearly and persuasively in positive or negative situations; listens and gets clarification; responds well to questions., • Dependability: Completes tasks on time; Follows instructions, responds to management direction., • Drives a company vehicle to clients’ buildings daily. What you'll need: • Minimum 1 year of relevant roofing or construction experience, or military experience., • Driver's License (REQUIRED)., • 21 years of age or older (REQUIRED to drive company vehicle)., • High school diploma, or equivalent (REQUIRED)., • Ability to travel out of town, for up to 4 weeks at a time, when local work is not available (REQUIRED)., • Must be able to work overtime in emergency situations., • Weekend work as needed., • Ability to communicate effectively through written correspondence and verbally in English. Physical Working Conditions: • Must be able to lift up to 50 pounds at a time on a regular basis throughout the day., • Must be able to frequently ascend/descend ladder from 10 to 40’ in height., • Must be able to remain in a stationary position for an extended period of time., • Constantly works in outdoor weather conditions., • Must be able to work in varied extreme weather conditions (extreme hot and extreme cold weather)., • Load and unload material and equipment and materials from variant heights., • Shovel loose materials such as gravel, sand metal snow, or dirt. Simon Roofing is an Equal Opportunity Employer and does not discriminate against any applicant on race, color, religion, national origin, gender, marital status, age, disability, sexual orientation, military/veteran status, or any other status protected by the Federal or State law or local ordinance. Note: The statements herein are intended to describe the general nature and levels of work performed by employees, but are not a complete list of responsibilities, duties, and skills required of the personnel so classified. Furthermore, they do not establish a contract for employment and are subject to change at the discretion of the employer. FL License Number: CCC048202 I certify the information I have provided in this Employment Application is true and complete to the best of my knowledge. I understand that, if hired, discovery of any false information provided or any relevant information omitted (no matter when discovered) may result in the immediate termination of my employment. I authorize Simon Roofing and Sheet Metal Corp. (the "Company") to make whatever inquiries it deems necessary or appropriate of any person or organization to verify any of the information I have provided in this application and to determine my qualifications and abilities. I hereby release the Company from any and all claims or action or causes of action arising out of the Company's lawful inquiries and/or its determination of my qualifications and abilities. Powered by JazzHR xvLIn3IefK

Job DescriptionNOW HIRING – HVAC SERVICE TECHNICIAN Established Commercial HVAC Service Contractor An established and growing commercial HVAC service contractor is seeking a reliable, motivated, and experienced HVAC Service Technician to join our team! We are looking for a qualified individual with 3 or more years of HVAC experience preferred, including preventive maintenance, troubleshooting, service, repairs, and light installation work. Responsibilities include servicing commercial and residential heating and air conditioning systems, including rooftop units (RTUs), split systems, furnaces, mini-splits, and related HVAC equipment. Daily duties include performing routine maintenance, replacing air filters, diagnosing electrical and mechanical problems, replacing defective components, and performing basic sheet metal fabrication and ductwork installation as needed. Qualified candidates must possess a valid driver’s license with a clean driving record, have good mechanical and troubleshooting skills, and be comfortable working on ladders, including standard A-frame ladders. Applicants should be dependable, professional, and capable of working both independently and as part of a team. Our company services commercial and residential properties throughout Northern New Jersey and New York City, offering a variety of service and maintenance projects. We offer full-time, year-round employment, competitive pay based on experience, and a company vehicle. This is an excellent opportunity to join an established company offering steady work, a supportive team environment, and long-term career opportunities. Interested candidates are encouraged to apply!

Job Description A Metal Shop in Paterson, NJ is looking for a Sheet Metal Helper experienced on Power Brake, Power Shear and general fabricating, must be able to read a ruler. Please contact (973)881-0480

\n Job Title: Facilities Maintenance Technician \n Location: Inwood, NY, 11096 \n Duration: 2 Months \n Job Type: Temporary Assignment \n Work Type: Onsite \n Shift: 1st Shift \n \n Overview: \n \n TekWissen is a global workforce management provider headquartered in Ann Arbor, Michigan that offers strategic talent solutions to our clients world-wide. Our client provides services to the travel industry, including catering, onboard retail, food service provisioning, and food logistics and is a supplier to many major airlines. \n \n Job Description : \n \n Summary: \n\n • The Facilities Maintenance Technician's primary role is to perform various skilled and semiskilled tasks to maintain a 24/7 facilities operation.\n, • Responsibilities include maintaining the mechanical, electrical, and life safety equipment as well as, the appearances of the facilities and grounds at various property locations.\n, • The position also assists with scheduling and overseeing the work performed by various contractors ensuring they use safe practices, do quality work and clean up their work area.\n, • Therefore, this person must be self directed and be able to prioritize.\n\n Essential Duties and Responsibilities: \n\n • Schedules, oversees and may assist assigned contractors ensuring the safety, quality and cleanliness of work performed.\n, • Escorts contractors in critical areas when required.\n, • Performs building repairs including drywall, paint, wall-covering, ceiling tile and grid, carpet and tile flooring, door and door hardware.\n, • Performs plumbing repairs including faucets, sinks, urinals, toilets, drains, and valves.\n, • Performs exterior repairs including but not limited to irrigation, signs, fence, roof, and metal siding.\n, • Performs daily site inspections of the facilities and mechanical equipment to ensure proper operation.\n, • Performs preventive maintenance to building systems and equipment as assigned and creates equipment check sheets as requested.\n, • Provides a report to the Maintenance Coordinator noting any problems found.\n, • Performs repairs of Heat Ventilation Air Conditioning (HVAC) systems, which may include heating boilers, air conditioning units, VAV boxes, exhaust fans, building automation controls and filter replacement.\n, • Performs electrical repairs, such as replacing lamps, ballasts, switches, receptacles, cord caps, wiring of single and three phase motors, and installation of circuits.\n, • Manages work requests, creates spreadsheets for and maintains an inventory of tools and supplies, creates online purchase orders for parts and supplies as required.\n, • Manages office furniture reconfigurations, furniture moves and office moves, as requested.\n\n Skills/Experience: \n\n • Qualifications:\n\n Education: \n\n • High School Diploma or GED required.\n\n Work Experience: \n\n • Requires at least 2 full years of recent related experience.\n\n Skills: \n\n • Working knowledge of electrical and plumbing systems.\n, • Must pass company testing for welder.\n, • Sheet metal mechanic.\n\n Communication Skills: \n\n • Good written and oral communication skills.\n\n Certificates, Licenses and Registrations: \n\n • Ability to obtain Airport Transport Authority badge required.\n, • Ability to obtain Customs Seal for Airport Transport Authority badge required.\n\n Environmental Requirements: \n\n • Regularly stands, walks, bends, lifts, and moves intermittently during shifts of 10+ hours.\n, • In a normal production kitchen facility there may be physical discomfort due to temperature and noise.\n, • Ability to lift 25 lbs.\n, • Push and pull or maneuver 50-75 lbs.\n, • Ability to work outdoors 50% of the time.\n, • Ability to work at heights of or about 50 feet.\n\n Demonstrated Competencies to be Successful in the Position: \n\n • Thinking - Information search and analysis, problem resolution skills.\n, • Engaging - understanding others, team leadership, developing people.\n, • Inspiring - influencing and building relationships, motivating and inspiring, communicating effectively.\n, • Achieving - delivering business results under pressure, championing performance improvement, customer focus.\n, • They are not intended to be an exhaustive list of all duties, responsibilities, and skills required.\n, • Management reserves the right to modify, add, or remove duties and to assign other duties as necessary.\n, • In addition, reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of this position.\n, • Candidates will be required to go through Pre-employment drug screen, criminal background check, and/or airport fingerprinting.\n, • gategroup is an equal opportunity employer committed to workforce diversity.\n, • All qualified applicants will receive consideration for employment and will not be discriminated against on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, veteran status, disability status or other category under applicable law.\n\n TekWissen® Group is an equal opportunity employer supporting workforce diversity. \n

Automation Engineering Manager – Robotics & Automation Job reference Number: 343267-1444-26254 Industry Sector: Automation Engineering Manager, Automation Engineer, Robotics Engineer, Robotics, Manufacturing Engineering, Engineering Manager, Automation, Industrial Robots, Cobots, Universal Robots, Fanuc, Amada, Robotic Welding, Robotic Bending, Press Brakes, Sheet Metal, Metal Fabrication, Manufacturing, CNC, Panel Benders, Laser Cutting, End of Arm Tooling, EOAT, Grippers, Vacuum Systems, Fixtures, Mechatronics, Production Engineering, Process Engineering Location: Yonkers, New York Working Hours: 8:30 – 5:00 Remuneration: $100,000 - $135,000 (neg.) & benefits package The role of the Automation Engineering Manager – Robotics & Automation will involve: • Hands-on technical ownership of robotics and automation within a high-mix sheet metal manufacturing environment, • Programming, teaching and optimising Universal Robots cobots, Amada robotic bending cells, Fanuc deburring robots and robotic welding equipment, • Selecting and specifying grippers, suction cups, vacuum systems, fixtures, regrip stations and other end-of-arm tooling, • Improving the utilisation, productivity and performance of existing robotic and automated cells, • Managing and developing a library of 2,000+ existing robot programmes through naming standards, revision control, routings and setup documentation, • Evaluating future automation opportunities and identifying where existing robotics can be redeployed before new capital investment is made, • Training and developing robot programmers, setup personnel and operators to ensure automated cells can operate effectively across shifts, • Supporting preventative maintenance, troubleshooting and spare-parts requirements for robotic cells, • Establishing appropriate safety standards for collaborative and industrial robot cells, including risk assessments, guarding, light curtains and interlocks The ideal applicant will be an Automation Engineering Manager – Robotics & Automation with: • Must have 7+ years' experience within sheet metal fabrication, metal forming or a closely related manufacturing environment, • Must have at least 3 years' hands-on experience programming and running industrial robots or cobots in production, • Must have hands-on Universal Robots experience, including PolyScope, URCaps or equivalent, • Experience with robotic press brake tending, ideally Amada or comparable bending automation, • Experience selecting and applying end-of-arm tooling including mechanical grippers, vacuum/suction cups, magnetic grippers and quick-change systems, • Ideally have Amada robotic bending and Fanuc robot experience, including teach pendant and Roboguide or similar, • Experience with Salvagnini panel benders or comparable panel-bending technology would be advantageous, • Ideally have experience with laser cutting automation, nesting and the transition from cutting to forming, • High-mix, low-volume manufacturing experience would be advantageous, • Would consider someone studying this at university/a recent graduate

Job Description We are currently looking for a Manufacturing Engineer with 3D CAD Design Proficiency for our client, a manufacturing company located in Yonkers, NY. This is a Permanent Direct Hire opportunity. Hours: 7am-4pm. Salary: $92-102K DOE. Job Description: • Provides assistance to the Production Engineering Manager for all aspects of planning functions., • Researches and analyzes production specifications and plant capacity to determine manufacturing processes., • Plans, prepares, and issues parts and material schedules that anticipates and coordinates with production sequences., • Researches, plans, and schedules manufacture of jigs, fixtures, and production aids based on requirements of production sequences., • Develops procedures for the construction of production aids and modifications of these as needed., • Research, design, evaluate, install, operate, and maintain mechanical products, equipment, systems and processes to meet requirements, applying knowledge of engineering principles., • Develop and test models of alternate designs and processing methods to assess feasibility, operating condition effects, possible new applications and necessity of modification., • Estimate costs and submit bids for engineering, construction, or extraction projects, and prepare contract documents., • Uses computer assisted design/drafting (SolidWorks, AutoCAD) equipment and software to develop production (shop) drawings., • Creates and revises production drawings (detail and assembly drawings)., • Utilizes knowledge of various machines, engineering practices, mathematics, materials, and other physical sciences to complete drawings., • Drafts detailed Multiview drawings of individual parts from assembly drawings., • Creates DXF files as used in writing CNC programs, completes CNC programs., • Responsible for maintaining an organized file system for Production Drawings. Job Specification:, • Must have a minimum of five (5) years’ experience in plant engineering or production planning., • Bachelor of Science degree in Mechanical, and/or Electrical Engineering (or equivalent experience) is required., • Must have direct work experience with production processes, manufacturing technologies, and facility equipment including machinery, overhead cranes, jigs, fixtures, rigging, and production aids., • Must have excellent communication and problem-solving skills., • Able to create 2D or 3D designs to run simulations, analyze and test., • This position requires direct exposure to work conditions on the factory shop floor., • Ability to work with mathematical concepts such as statistical inference, and fundamentals of plane and solid geometry and trigonometry. Ability to apply concept such as fractions, percentages, ratios, and proportions to practical situations. Comfortable working with metric system., • Solid understanding of drafting techniques and familiarity with engineering terminology., • Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists., • Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form., • High skill level in SolidWorks CAD software, AutoCAD version 2000 or higher., • Skilled in PC usage and associated software including Microsoft Office (Word, Excel)., • Ability to learn new graphic software to complete CAM programs for Laser and Turret Punch machines., • Working Knowledge of Sheet metal fabrication equipment such as Brake Press and Shear a plus.

Job Description Mechanical Engineer Mechanical Engineer – Mid-Level Reports To: Mechanical Engineering Manager We are seeking a Mechanical Engineer to take ownership of the design, engineering, documentation, and technical support of assigned mechanical projects. This is a hands-on role requiring strong knowledge of machine design, power transmission, manufacturing, fabrication, and mechanical systems. The ideal candidate can take a project from specification and concept through design, fabrication, testing, and final documentation while working closely with Sales, Drafting, Electrical Engineering, Production, and Service. Background Requirements • Bachelor of Science degree in Mechanical Engineering., • 3–7 years of relevant mechanical engineering experience, preferably in machine design, industrial equipment, or manufacturing., • Strong background in machine design and power transmission technologies., • Working knowledge of sheet metal fabrication, structural steel, welding, shop fabrication processes, and manufacturing methods., • Understanding of strength of materials, thermodynamics, fluid dynamics, and mechanical engineering principles., • Practical experience with AutoCAD; experience with Autodesk Inventor is preferred., • Strong understanding of engineering drawings, tolerances, materials, components, and manufacturing processes., • Strong analytical, problem-solving, organizational, and communication skills. Primary Responsibilities • Take full responsibility for the engineering and design of assigned mechanical projects, from initial specifications through production, testing, and project closeout., • Review machine specifications for completeness, technical feasibility, and manufacturability., • Perform engineering calculations to determine equipment requirements and support sound component, machine, and feeder design., • Create or direct the creation of layouts, sketches, detail drawings, assembly drawings, approval drawings, and 3D models., • Work closely with the Drafting Department to ensure drawings are accurate, complete, and meet engineering requirements., • Review completed drawings for accuracy, dimensions, tolerances, and technical content., • Create and maintain accurate Bills of Materials (BOMs) and engineering documentation., • Specify, document, and procure non-stock and buy-out components., • Recommend product improvements and manufacturing methods that improve quality, performance, reliability, cost, or manufacturability., • Coordinate with Electrical Engineering on electro-mechanical design and integration issues., • Support Sales with technical information, project requirements, and customer-related engineering questions., • Prepare drawing transmittals and approval documentation for customer review., • Work directly with Production to resolve engineering issues and provide assembly instructions, drawing clarifications, and technical support., • Perform periodic in-process fabrication and assembly inspections to ensure work meets engineering requirements., • Perform incoming inspections of specialty buy-out components., • Perform final inspections of completed equipment and ensure all equipment documentation is accurate and up to date., • Provide technical assistance to the Service Department, particularly during equipment testing and commissioning., • Close out assigned projects and provide all required documentation to Sales in a timely manner., • Maintain accurate records of project work and time spent on assigned tasks., • Follow all company policies, procedures, engineering standards, and safety requirements. What Makes You a Great Fit You are a practical, hands-on engineer who understands that good mechanical design must work in the real world. You can move comfortably between engineering calculations, CAD drawings, the production floor, and conversations with customers, suppliers, drafters, and technicians. You take ownership of your projects, pay attention to detail, solve problems quickly, and look for ways to make equipment safer, more reliable, easier to manufacture, and more cost-effective. What We Offer • Competitive salary and benefits package., • Professional growth opportunities in a collaborative team environment., • Exposure to diverse, technically challenging projects., • Supportive workplace culture with opportunities for mentorship and leadership., • A dynamic, flexible culture, that promotes collaboration and professional/ personal growth of each team member., • To be a part of a well-established team that values hard work, innovation & knows the value of its people., • Coaching, mentoring helping team members realize their potential, aiding in defining goals and executing them., • We are privately owned with an aggressive growth strategy; Making way for ample advancement opportunities to transition into operations and/or direct management., • Competitive base package + bonus plan, • We have continuous training, and are firm believers that a strong, knowledgeable, well-trained staff is the reason we are at the top of our field, having continued success., • Our goal as leaders is to provide value, value to our clients, vendors and more importantly to our team - YOU! Mechanical Engineer | Mid-Level Mechanical Engineer | Mechanical Design Engineer | Machine Design | Mechanical Design | Power Transmission | AutoCAD | Autodesk Inventor | Industrial Equipment | Machine Engineering | Manufacturing | Sheet Metal Fabrication | Structural Steel | Welding | Mechanical Systems | Engineering Drawings | CAD | BOM | Bills of Materials | DFM | Design for Manufacturing | Quality Inspection | Equipment Design | Electro-Mechanical Systems | Product Improvement Looking forward to getting to know you… We are, and work with clients that are equal opportunity employers and considers all applicants for positions without regard to race, color, religion, gender, sexual orientation, age, national origin, disability, veteran status, or any other protected status.

Job Description Facilities Maintenance Technician Location: Inwood, NY (JFK AREA#ZIME Pay: $29–$32 per hour Schedule: 8:00 AM–4:30 PM; flexibility required Start Date: As soon as possible About the Position Staffing Network is seeking an experienced Facilities Maintenance Technician to support daily maintenance and repairs at a facility in the JFK area. The ideal candidate has a strong background in building or apartment maintenance, can troubleshoot problems independently, and can prioritize work in a busy environment. Responsibilities • Perform general building repairs, including drywall, painting, flooring, ceiling tiles, doors, and door hardware., • Repair plumbing fixtures, including faucets, sinks, toilets, drains, and valves., • Maintain and repair HVAC equipment, including heating and cooling systems, exhaust fans, controls, and filters., • Perform electrical repairs involving lighting, switches, outlets, motors, and circuits., • Conduct daily facility inspections and preventive maintenance; report equipment issues., • Complete exterior repairs involving fencing, signs, roofing, siding, and irrigation., • Coordinate and oversee contractors to ensure safe, quality work and clean work areas., • Track maintenance requests, maintain tool and supply inventories, and prepare purchase orders., • Assist with furniture moves and office reconfigurations. Required Qualifications, • At least 2 years of recent, related facilities or building maintenance experience., • High school diploma or GED., • Working knowledge of electrical and plumbing systems., • Sheet metal experience and ability to pass company welding testing., • Strong troubleshooting, organization, and written and verbal communication skills., • Ability to work independently and manage competing priorities., • Ability to obtain the required Airport Transport Authority badge and Customs Seal. Preferred Experience, • Maintenance experience in a commercial kitchen or food production facility., • Experience working with commercial kitchen equipment, including Hobart or similar equipment., • HVAC maintenance and repair experience. Physical Requirements and Work Environment, • Ability to stand, walk, bend, and move throughout the shift., • Ability to lift 25 pounds and push, pull, or maneuver 50–75 pounds., • Ability to work outdoors approximately 50% of the time., • Ability to work at heights of approximately 50 feet.

Job Description Facilities Maintenance Technician Staffing Network Location: JFK Airport Area, Inwood, NY 11096 Schedule: Monday-Friday, 8:00 AM - 4:30 PM (flexibility required) Pay Rate: $29.00 - $32.50HR Position Overview Staffing Network is seeking a skilled Facilities Maintenance Technician to support a busy 24/7 facility operation near JFK Airport. This role is responsible for maintaining building systems, performing repairs, supporting facility operations, and ensuring equipment and grounds remain in excellent condition. The ideal candidate is self-motivated, dependable, and able to prioritize multiple maintenance needs. Based on the provided job requirements. Key Responsibilities • Perform general building maintenance and repairs., • Repair and maintain drywall, paint, ceilings, flooring, doors, and hardware., • Troubleshoot and repair plumbing systems including sinks, toilets, urinals, drains, and valves., • Conduct preventive maintenance on facility equipment and systems., • Perform HVAC maintenance and repairs, including air conditioning units, exhaust fans, filters, boilers, and controls., • Conduct electrical repairs including lighting, switches, receptacles, motors, and circuits., • Complete daily facility inspections and report maintenance issues., • Coordinate and oversee contractors to ensure safe, quality work., • Manage work orders, maintenance inventories, and purchase requests., • Assist with office and furniture moves and facility reconfigurations., • Support exterior maintenance including roofing, fencing, signage, irrigation systems, and siding. Required Qualifications, • High School Diploma or GED., • Minimum of 2 years of recent facilities, building maintenance, apartment maintenance, or related experience., • Working knowledge of electrical and plumbing systems., • Strong troubleshooting and problem-solving skills., • Ability to work independently and prioritize tasks., • Strong written and verbal communication skills., • Ability to obtain Airport Authority and Customs badges as required., • Welding knowledge and ability to pass welding testing., • Experience working in commercial kitchens or food production environments. (preferred), • HVAC experience. (preferred), • Sheet metal experience. (preferred)Physical Requirements, • Ability to lift up to 25 lbs. and move up to 75 lbs., • Ability to stand, walk, bend, and perform physical work throughout the day., • Ability to work outdoors approximately 50% of the time., • Comfortable working at heights up to 50 feet. What We're Looking For, • Maintenance workers with strong facilities or apartment maintenance backgrounds., • Individuals who thrive in a fast-paced environment and can support overflow maintenance needs., • Team players who are safety-focused, detail-oriented, and customer-service driven. Apply Today! If you have hands-on maintenance experience and are ready to join a dynamic facilities team, Staffing Network wants to hear from you. Submit your resume today for immediate consideration. #ZRDFW

Automation Engineering Manager – Robotics & Automation \n \n Job reference Number: 343267-1444-26254 \n \n Industry Sector: Automation Engineering Manager, Automation Engineer, Robotics Engineer, Robotics, Manufacturing Engineering, Engineering Manager, Automation, Industrial Robots, Cobots, Universal Robots, Fanuc, Amada, Robotic Welding, Robotic Bending, Press Brakes, Sheet Metal, Metal Fabrication, Manufacturing, CNC, Panel Benders, Laser Cutting, End of Arm Tooling, EOAT, Grippers, Vacuum Systems, Fixtures, Mechatronics, Production Engineering, Process Engineering \n \n Location: Yonkers, New York \n \n Working Hours: 8:30 – 5:00 \n \n Remuneration: $100,000 - $135,000 (neg.) & benefits package \n \n The role of the Automation Engineering Manager – Robotics & Automation will involve: \n \n\n • Hands-on technical ownership of robotics and automation within a high-mix sheet metal manufacturing environment\n, • Programming, teaching and optimising Universal Robots cobots, Amada robotic bending cells, Fanuc deburring robots and robotic welding equipment\n, • Selecting and specifying grippers, suction cups, vacuum systems, fixtures, regrip stations and other end-of-arm tooling\n, • Improving the utilisation, productivity and performance of existing robotic and automated cells\n, • Managing and developing a library of 2,000+ existing robot programmes through naming standards, revision control, routings and setup documentation\n, • Evaluating future automation opportunities and identifying where existing robotics can be redeployed before new capital investment is made\n, • Training and developing robot programmers, setup personnel and operators to ensure automated cells can operate effectively across shifts\n, • Supporting preventative maintenance, troubleshooting and spare-parts requirements for robotic cells\n, • Establishing appropriate safety standards for collaborative and industrial robot cells, including risk assessments, guarding, light curtains and interlocks\n\n \n The ideal applicant will be an Automation Engineering Manager – Robotics & Automation with: \n \n\n • Must have 7+ years' experience within sheet metal fabrication, metal forming or a closely related manufacturing environment\n, • Must have at least 3 years' hands-on experience programming and running industrial robots or cobots in production\n, • Must have hands-on Universal Robots experience, including PolyScope, URCaps or equivalent\n, • Experience with robotic press brake tending, ideally Amada or comparable bending automation\n, • Experience selecting and applying end-of-arm tooling including mechanical grippers, vacuum/suction cups, magnetic grippers and quick-change systems\n, • Ideally have Amada robotic bending and Fanuc robot experience, including teach pendant and Roboguide or similar\n, • Experience with Salvagnini panel benders or comparable panel-bending technology would be advantageous\n, • Ideally have experience with laser cutting automation, nesting and the transition from cutting to forming\n, • High-mix, low-volume manufacturing experience would be advantageous\n, • Would consider someone studying this at university/a recent graduate\n\n

Job Description Flue Tech Inc. - Norwood, New Jersey Flue Tech Inc. is a premium fireplace, chimney, venting, and specialty construction company serving the Tri-State area since 1999 - more than 27 years. We work on high-end residential and commercial projects throughout New Jersey, New York City, New York, Connecticut, and select projects beyond the region. We are seeking a reliable, mechanically inclined Fireplace & Chimney Apprentice to join our field team. This is a full-time, year-round, paid hands-on trade-development position with a path to becoming a Field Technician and advancing into higher-level field roles. Direct fireplace or chimney experience is not required; construction or skilled-trade experience is a plus. What You Will Learn and Do • Assist lead technicians and managers with fireplace, chimney, venting, liner, repair, restoration, and installation projects., • Set up and protect work areas in occupied residential and commercial environments., • Retrieve, organize, load, unload, and maintain tools and materials., • Assist with masonry preparation, material handling, installation support, job-site cleanup, and vehicle organization., • Learn proper ladder, roof, tool, equipment, and job-site safety procedures., • Follow drawings, measurements, manufacturer instructions, and field direction as your skills develop., • Help document work with photos, field notes, completion information, and material requirements., • Maintain a professional appearance and communicate appropriately with clients, contractors, and Flue Tech team members. What We Are Looking For • Dependable, punctual, organized, and willing to learn., • Strong mechanical aptitude and practical problem-solving ability., • Comfort working outdoors year-round and at heights when properly trained and equipped., • Ability to safely perform physically demanding construction work., • Valid driver's license and ability to meet company driving requirements., • Team-oriented attitude and professional conduct on premium job sites. Helpful Background Construction, masonry, carpentry, roofing, HVAC/mechanical work, sheet metal, plumbing, general labor, or other hands-on trade experience is helpful but not required. OSHA, CSIA, NFI, F.I.R.E., or manufacturer certifications are a plus. Compensation and Benefits $18.50-$23.00 per hour, depending on experience and demonstrated capability. Full-time year-round work with overtime opportunities. Current benefits include health and dental coverage, 401(k), paid vacation, paid holidays, training, and performance-based bonus opportunities subject to company plan terms. Schedule Primarily weekday daytime work, with overtime and occasional weekend work as project needs require.

Job Description Full time position for a Mechanical Designer to generate and update 3D Autodesk Inventor models for product, tools, and fixture components and assemblies. Generate and update detailed dimensioned drawings for components and assemblies. Generate & update bills of materials. · Develop design concepts and prepares documents for custom designs. Corrects and updates design documents as needed. · Uses computer aided design technologies to develop sketches, drawings and assembly documents. Reviews drawings and documents to assure compliance with company design and production standards. · Ability to read/interpret assembly and product specification drawings. · Create sheet metal fabrication drawings to comply with standards. · Generate assembly drawings for production and customer documentation. · Generate Bill of Materials for data entry and prepare Engineering Change Orders as necessary. · Highly motivated, self-starter · Experience with Autodesk Inventor and AutoCAD. · Sheet metal experience a plus. \nCompany Description VAC-U-MAX specializes in design and manufacture of pneumatic systems and support equipment for conveying, weighing and batching of dry materials. The primary technology for conveying is vacuum, but positive pressure pneumatic systems as well as mechanical conveyors are used as applications dictate. An equally important activity is design and manufacture of heavy duty industrial vacuum cleaners, ranging from small air and electric powered drum styled units to large electric and diesel powered units. VAC-U-MAX specializes in design and manufacture of pneumatic systems and support equipment for conveying, weighing and batching of dry materials. The primary technology for conveying is vacuum, but positive pressure pneumatic systems as well as mechanical conveyors are used as applications dictate. An equally important activity is design and manufacture of heavy duty industrial vacuum cleaners, ranging from small air and electric powered drum styled units to large electric and diesel powered units.

Job Description A Metal Shop in Paterson, NJ is looking for a Sheet Metal Mechanic experienced in Fabricating and Assembly of Stainless Steel Equipment, Shear, Punching and Notching

Job Description Manufacturing Manager (Electro-Mechanical Equipment) We are seeking an experienced Manufacturing Manager (or) a seasoned Supervisor ready to transition to a PM with a background in manufacturing of electro-mechanical machinery, and capital equipment. (We will invest in your training, bringing you up to speed with our products) Responsibilities: • Maintained current production schedule, updated daily to track all aspects of equipment orders as they progress and communicate progress., • Manage six (6) supervisors directly, and fifty (60) indirect reports., • Provide the means to establish realistic production schedules that can be met, and schedules that will allow the Company to be competitive with respect to equipment manufacturing lead-times., • Ensure the accurate and timely entry of Production Department data into the IT system., • Conduct weekly production meetings with all applicable Production Personnel to discuss all aspects of production scheduling., • Ensure the proper handling and disposal of all hazardous materials used in the manufacturing process, • Prepare and conduct timely performance reviews for subordinate employees, • Work closely with the 'Materials Manager', who in turn, works closely with the Purchasing Department., • Assist in developing accurate manufacturing time studies that are necessary to develop realistic production scheduling and equipment manufacturing costs, • Ensure that all departments provide the type of cooperation that is essential for Production to meet commitments., • Conduct production meetings to ensure solid inter-departmental communication and continuity regarding all production-related matters., • Ensure a safe and secure work environment within the manufacturing facility., • Prioritize safety as a core value in all aspects of production., • Foster a culture of safety and accountability to minimize workplace incidents and enhance workforce well-being and productivity., • Ensure that the Production Testing Facilities in both buildings are appropriately equipped and maintained clean and tidy Requirements: • Ability to lead, mentor and coach team members., • Solid track record in overall plant management, • Strong work ethic and a high-energy level, • Prior experience with an ERP or MRP system, • Experience in supervision of the production department of a small to medium-size manufacturer., • Exposure to organizations that have in-house sheet metal, welding & fabrication, machine shops., • Mechanical or Industrial Engineering degree, a plus- NOT required., • Experience organizing production operations with a specialty machinery manufacturer., • Organizational Skills:, • Ensuring smooth manufacturing processes, • Meeting deadlines, • Efficiently utilizing resources, • Problem-Solving:, • Identifying issues, • Analyzing root causes, • Implementing effective solutions, • Communication:, • Facilitating clear communication between departments, • Communicating effectively with the workforce, • Adaptability:, • Adjusting production schedules, • Modifying processes, • Allocating resources to adapt to changing environments., • Attention to Detail:, • Maintaining precise specifications, • Upholding quality standards throughout production, • Safety Focus:, • Creating and maintaining a safe work environment, • Promoting a safety culture among the workforce, • Customer Focus:, • Understanding and meeting customer needs, • Ensuring timely delivery and maintaining quality Qualifications: • Close vision, and color vision ability required, • Safely and effectively lifting, carrying, and moving objects of varying weights, • Bending, stooping, reaching, balancing, standing, and walking for extended periods and maintaining the necessary physical dexterity and coordination, • Working in various environmental conditions, which may include exposure to varying temperatures, and noise levels at times Physical Requirements: • Safely and effectively lift, carry, and move objects of varying weights., • Bending, stooping, kneeling, reaching, climbing, balancing, standing, and walking, for extended periods and maintain the necessary physical dexterity and coordination., • Work in various environmental conditions, which may include exposure to varying temperatures, weather, and noise levels. What we offer: • A dynamic, flexible culture, that promotes collaboration and professional/ personal growth of each team member., • To be a part of a well-established team that values hard work, innovation & knows the value of its people., • Coaching and mentoring, helping team members realize their potential, aiding in defining goals and executing them., • We have an aggressive growth strategy; Making way for ample advancement opportunities to transition into operations and/or direct management., • Competitive base package + bonus plan, • We have continuous training, and are firm believers that a strong, knowledgeable, well-trained staff is the reason we are at the top of our field, having continued success., • Our goal as leaders is to provide value, value to our clients, vendors and more importantly to our team- YOU. Looking forward to getting to know you… We are, and work with clients that are equal opportunity employers and considers all applicants for positions without regard to race, color, religion, gender, sexual orientation, age, national origin, disability, veteran status, or any other protected status.

Job DescriptionLaser / Punch Press Programmer Location: Bergen County, NJ (on-site) Salary: $80,000 - $100,000 Type: Full-time, Exempt Reports to: Production Manager About the Opportunity A precision medical device contract manufacturer is looking for a hands-on Laser / Punch Press Supervisor to lead its sheet metal fabrication department. You'll own programming, scheduling, tooling, and people for the department. This is a strong fit for an experienced programmer who is ready to run a team in a regulated, high-quality environment. What You'll Do Develop and oversee CNC programs for laser cutting and turret punch press components, delivered on time and right the first time Run day-to-day department operations and partner with the Production Manager and other supervisors across two facilities Schedule and stage work orders, assign operators, and give them the job information they need Step in as a backup programmer or operator when needed Design and select tooling for specific materials and processes Review ECNs and update programs according to internal procedures Coordinate with Maintenance to keep equipment properly maintained, and make sure operators handle routine upkeep Help manage the team, including hiring, training, corrective actions, and annual reviews Drive continuous improvement in run rate, quality, and efficiency across programs, processes, and tooling Support special projects such as quoting, purchasing, and validating new equipment and technology What You Bring 10+ years of laser and/or punch press experience, including 5+ years of hands-on programming Experience with Amada, LVD, Trumpf, or comparable equipment. Amada AP100 programming is a strong plus. Ability to set up and run laser and punch jobs from supplied layouts, and to choose the right tooling Experience in a highly regulated manufacturing environment. Medical device or ISO 13485 experience is a plus. Working knowledge of GMP Strong GD&T, blueprint reading, and knowledge of sampling and inspection plans Comfort with precision measuring instruments Proficiency with AutoCAD, SolidWorks, MS Office, and production or ERP systems Leadership and communication skills to work with all levels of the plant and, occasionally, customers A record of success in a fast-paced, deadline-driven shop Bachelor's degree preferred, or equivalent experience Physical Requirements Standing for long periods, with frequent bending, stooping, pushing, and pulling Lifting up to 25 lbs Keeping work areas clean, organized, and safe 10+ years of laser and/or punch press experience, including 5+ years of hands-on programming Experience with Amada, LVD, Trumpf, or comparable equipment. Amada AP100 programming is a strong plus. Ability to set up and run laser and punch jobs from supplied layouts, and to choose the right tooling Experience in a highly regulated manufacturing environment. Medical device or ISO 13485 experience is a plus. Working knowledge of GMP Strong GD&T, blueprint reading, and knowledge of sampling and inspection plans Comfort with precision measuring instruments Proficiency with AutoCAD, SolidWorks, MS Office, and production or ERP systems Leadership and communication skills to work with all levels of the plant and, occasionally, customers A record of success in a fast-paced, deadline-driven shop Bachelor's degree preferred, or equivalent experience By applying for this job, you agree to receive calls, Al-generated calls, text messages, or emails from Synerfac Technical Staffing and our contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undeliverable messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy at www.synerfac.com/privacy/

Job DescriptionJob Title: Sheet Metal Mechanic Press Brake OperatorJob Description This role focuses on setting up and operating press brakes to produce complex formed sheet metal parts in a high-quality, high-precision fabrication environment. You will select appropriate tooling, perform complete setups, verify part quality, and support continuous improvement across fabrication operations while working with advanced sheet metal technologies. Responsibilities • Set up and operate press brakes for production runs, ensuring efficient and accurate operation throughout each job., • Select proper tooling and dies based on material type, thickness, and specific part requirements., • Produce complex formed sheet metal components by executing precise and repeatable bends., • Perform complete press brake setups, including programming, tooling changes, and adjustments for different jobs., • Check and inspect finished parts to verify dimensions, tolerances, and overall quality against blueprints and specifications., • Troubleshoot forming and production issues, identifying root causes and implementing corrective actions to maintain productivity., • Maintain production quality standards by following fabrication best practices and established procedures., • Support fabrication operations by collaborating with other departments involved in sheet metal fabrication, coating, and assembly., • Assist with process improvements to enhance efficiency, quality, and safety in press brake and sheet metal operations., • Train and mentor less experienced press brake operators, sharing knowledge of tooling, setup, and fabrication techniques., • Perform setup, repair, and troubleshooting functions on press brakes and related equipment as needed.Essential Skills, • Several years of hands-on press brake setup experience in a production or industrial environment., • Strong knowledge of dies, tooling selection, and their application to various sheet metal materials and part designs., • Background as a sheet metal mechanic with experience in sheet metal fabrication and forming processes., • Ability to read and interpret blueprints and use them to produce accurate formed parts., • Proficiency in performing complete press brake setups, including complex bend sequences., • Solid understanding of sheet metal forming principles and fabrication best practices., • Capability to troubleshoot setup and production issues and implement effective solutions., • Ability to train and support less experienced operators in press brake operation and setup., • Commitment to maintaining production quality standards and meeting dimensional and cosmetic requirements.Additional Skills & Qualifications, • Experience working with advanced fabrication technologies such as CNC punching and fiber laser cutting., • Familiarity with industrial production environments involving paint preparation, coating, molding, and spraying processes., • Comfort working with a variety of metals and structural components in a full-service fabrication setting., • Experience supporting welding, powder coating, assembly, or related fabrication and finishing operations., • Strong attention to detail and ability to consistently inspect and verify finished components.Why Work Here? You join a long-established sheet metal fabrication organization with over a century of industry experience, offering a stable environment and deep expertise to learn from. The facility specializes in precision sheet metal manufacturing and provides exposure to advanced technologies such as CNC punching, laser cutting, welding, powder coating, assembly, and engineering services. You work with state-of-the-art manufacturing equipment in a full-service fabrication operation, gaining opportunities to expand your technical skills, collaborate with experienced professionals, and grow within a modern, technology-driven production environment. Work Environment This is a first-shift position, typically running from 6:00 AM to 2:30 PM, in an industrial production environment. Work takes place on the manufacturing floor with regular handling and forming of various metals. The facility is equipped with advanced fabrication technologies, including press brakes, CNC punching equipment, fiber lasers, and coating and finishing systems, providing a hands-on, fast-paced setting focused on precision sheet metal fabrication. Job Type & Location This is a Contract to Hire position based out of Totowa, NJ. Pay and Benefits The pay range for this position is $26.00 - $35.00/hr. Individual compensation offered for this position within this range will depend on many factors, including qualifications, skills, relevant experience, job knowledge, geographic location, internal equity, and other pertinent job-related factors. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: Medical, dental & vision Critical Illness, Accident, and Hospital 401(k) Retirement Plan Pre-tax and Roth post-tax contributions available Life Insurance (Voluntary Life & AD&D for the employee and dependents) Short and long-term disability Health Spending Account (HSA) Transportation benefits Employee Assistance Program Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Totowa,NJ. Application Deadline This position is anticipated to close on Oct 21, 2026. About Aerotek Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

Industry Sector: Automation Engineering Manager, Automation Engineer, Robotics Engineer, Robotics, Manufacturing Engineering, Engineering Manager, Automation, Industrial Robots, Cobots, Universal Robots, Fanuc, Amada, Robotic Welding, Robotic Bending, Press Brakes, Sheet Metal, Metal Fabrication, Ma

Turret Punch Press OperatorThis role focuses on setting up and operating CNC turret punch presses and CNC laser machines to produce precision sheet metal components. You ensure parts meet specifications through accurate setup, tooling changes, and rigorous inspection, while maintaining production quality, efficiency, and safety in a sheet metal manufacturing environment.Responsibilities:Set up and operate CNC turret punch presses and CNC laser equipment in a sheet metal fabrication environment.Change punches and tooling as required to meet specific job and part requirements.Perform machine setups to ensure optimal operation, accuracy, and throughput.Produce parts to specification by following work instructions and engineering drawings.Perform first-piece inspections to verify initial setups and adjust as needed.Conduct in-process inspections to monitor part quality throughout production runs.Measure parts using precision tools such as calipers and micrometers to confirm dimensional accuracy.Read and interpret blueprints to understand part geometry, tolerances, and fabrication requirements.Maintain production quality and efficiency by monitoring machine performance and workflow.Operate safely at all times in an industrial sheet metal manufacturing environment, following established safety procedures.Work independently with minimal training, taking ownership of assigned machines and production tasks.Collaborate with team members in fabrication, welding, and other departments to support overall production needs.Essential Skills:Hands-on experience operating CNC turret punch presses and/or CNC laser equipment.Ability to perform machine setups, including loading programs, adjusting settings, and aligning tooling.Proficiency in changing punches and tooling on CNC turret punch presses.Skill in measuring parts using precision inspection tools such as calipers and micrometers.Capability to perform first-piece and in-process inspections to maintain consistent part quality.Experience working in sheet metal fabrication environments.Ability to read and interpret blueprints for sheet metal components.Comfort working independently with minimal training in a production setting.Understanding of safe work practices in an industrial and sheet metal manufacturing environment.Additional Skills & Qualifications:Experience with welding processes, including MIG welding, in a fabrication setting.Experience in fixture design for sheet metal fabrication.Preferred experience with Amada EM2510NT Turret Punch equipment.Preferred experience with Amada Apelio VIPA Turret Punch/Laser combination machines.Preferred experience with Amada LCG2000 Fiber Laser systems.Preferred experience with Amada Regius Fiber Laser equipment.Experience working with automated tower loading systems.Exposure to press brake operations and general sheet metal forming.Familiarity with powder coating, assembly, and related fabrication processes is beneficial.Why Work Here?You join a fabrication organization with over a century of sheet metal experience, offering deep expertise and stability in the industry. The facility specializes in precision sheet metal manufacturing and provides exposure to advanced technologies, including CNC punching, laser cutting, welding, powder coating, assembly, and engineering services. Team members work with state-of-the-art equipment in a full-service fabrication environment, gaining hands-on experience with modern machinery and processes while contributing to high-quality custom products.Work Environment:This position is based on the production floor in an industrial sheet metal manufacturing facility. Work is performed on 1st shift (6:00 AM 2:30 PM) and 2nd shift (2:30 PM 10:30 PM), with operations centered around CNC turret punches, fiber lasers, welding, and other fabrication equipment. The environment involves working around automated tower loading systems and various fabrication technologies, primarily producing mostly custom products in smaller customer order quantities. Employees can expect a busy, hands-on setting where attention to safety, quality, and efficient workflow is essential.Job Type & Location:This is a Contract to Hire position based out of Totowa, NJ.Pay and Benefits:The pay range for this position is $23.00 - $30.00/hr. Individual compensation offered for this position within this range will depend on many factors, including qualifications, skills, relevant experience, job knowledge, geographic location, internal equity, and other pertinent job-related factors. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: Medical, dental & vision Critical Illness, Accident, and Hospital 401(k) Retirement Plan Pre-tax and Roth post-tax contributions available Life Insurance (Voluntary Life & AD&D for the employee and dependents) Short and long-term disability Health Spending Account (HSA) Transportation benefits Employee Assistance Program Time Off/Leave (PTO, Vacation or Sick Leave)Workplace Type:This is a fully onsite position in Totowa, NJ.Application Deadline:This position is anticipated to close on Oct 21, 2026.

Job Description Experienced Fireplace & Chimney Technician / Field Manager Flue Tech Inc. — Norwood, NJ Full-Time | $25–$35/hour DOE Flue Tech Inc. is looking for an experienced construction or specialty-trades professional to join our field team. This is a hands-on field leadership position for someone who can perform high-quality work, run jobs, supervise technicians and helpers, solve problems in the field, and represent Flue Tech professionally with clients and contractors. Direct fireplace and chimney experience is preferred, but we will also consider strong candidates from related skilled trades who have the construction experience, mechanical aptitude, and leadership ability to learn our systems. WHAT YOU'LL DO • Lead and perform fireplace, chimney, venting, liner, restoration, repair, and specialty installation projects. • Manage technicians and helpers, materials, tools, and daily job-site execution. • Review drawings, measurements, specifications, manufacturer instructions, and project documentation. • Identify field conditions affecting scope, materials, scheduling, safety, or completion. • Coordinate professionally with clients, contractors, architects, designers, project managers, and our office team. • Maintain clean, organized job sites and premium workmanship standards., • Document completed work with photos, field notes, material requirements, and completion information. • Train and supervise developing technicians and apprentices. WHO WE'RE LOOKING FOR Strong candidates will have: • Multiple years of hands-on construction or skilled-trade experience., • Experience independently running jobs, leading crews, or supervising field personnel. • Strong mechanical aptitude and problem-solving ability., • Ability to read drawings, measurements, specifications, and installation instructions. • Professional communication and customer-service skills., • A valid driver's license and ability to operate company vehicles., • Ability to safely perform physical construction work, including ladder and roof work when required. RELEVANT EXPERIENCE Experience in any of the following may be a strong fit: Fireplace & chimney work • Masonry • HVAC/mechanical • Roofing • Sheet metal • Carpentry • Plumbing • Commercial construction • Specialty installation • Construction foreman/crew leadership Fireplace and chimney experience is highly valuable, but it is not the only path into this position. CERTIFICATIONS OSHA 10/30, CSIA, NFI, F.I.R.E., manufacturer certifications, and other relevant construction or mechanical credentials are valuable and may affect starting compensation. Certifications are preferred, but strong relevant field experience can substitute. COMPENSATION $25–$35 per hour, depending on experience. Starting pay will be based on relevant trade experience, technical ability, certifications, leadership experience, and the level of responsibility the candidate can assume. Candidates who can independently manage complex field projects, supervise crews, and professionally represent Flue Tech with clients and contractors will be considered toward the upper end of the range. ABOUT FLUE TECH INC. Flue Tech Inc. is a premium fireplace, chimney, venting, and specialty construction company serving New Jersey, New York City, New York, Connecticut, and select projects beyond the region. Our work includes high-end residential and commercial fireplace installations, chimney systems, restorations, custom fabrication, draft systems, specialty venting, and technically challenging fireplace and chimney projects. If you take pride in quality workmanship, organization, technical problem-solving, and leading work properly in the field, we want to hear from you.

Required Skills & Experience -3+ years of metal fabrication experience, specifically working with rails, stairs, and beams. Hands-on experience fabricating metal components from raw material through finished product. Apply Today If you're an experienced Metal Fabricator looking to take on diverse pr

Applying for this role online is quick and easy – and you could even schedule your first day of work within 10 minutes!.Provide some basic information to start the application process.Watch a short video to see what the job is like.Complete our online application process.Receive your job offer and

A precision manufacturer specializing in custom-engineered metal bellows, electroforms, and related assemblies for highly demanding applications. Midnight SKILLS & COMPETENCIES: * Must be proficient in reading and interpreting blueprints, specification sheets, and/or mechanical drawings and in preci

Applying for this role online is quick and easy – and you could even schedule your first day of work within 10 minutes!.Provide some basic information to start the application process.Watch a short video to see what the job is like.Complete our online application process.Receive your job offer and

A precision manufacturer specializing in custom-engineered metal bellows, electroforms, and related assemblies for highly demanding applications.

Applying for this role online is quick and easy – and you could even schedule your first day of work within 10 minutes!.Provide some basic information to start the application process.Watch a short video to see what the job is like.Complete our online application process.Receive your job offer and

Maintenance Technician (1st Shift).We are seeking a skilled and detail-oriented Maintenance Technician / Controls Specialist to support the ongoing reliability, performance, and efficiency of our manufacturing operations.This role is responsible for maintaining plant equipment, troubleshooting elect

Applying for this role online is quick and easy – and you could even schedule your first day of work within 10 minutes!.Provide some basic information to start the application process.Watch a short video to see what the job is like.Complete our online application process.Receive your job offer and

Overnight Maintenance Technician | Commercial Office, NYC | $34-$36 per hour.Hays Facilities Management are partnered with a leading building owner to hire an Overnight Maintenance Technician.The job duties of the Overnight Maintenance Tech will include, among others:.Oversight of maintenance relate

Applying for this role online is quick and easy – and you could even schedule your first day of work within 10 minutes!.Provide some basic information to start the application process.Watch a short video to see what the job is like.Complete our online application process.Receive your job offer and

THIRD-PARTY AGENCIES: PLEASE DO NOT CONTACT US REGARDING THIS POSITION.The Malwin Company is an aerospace and defense enterprise that brings together specialized engineering, manufacturing, and technology capabilities under one organization.Our teams design, develop, manufacture, and support highly

Applying for this role online is quick and easy – and you could even schedule your first day of work within 10 minutes!.Provide some basic information to start the application process.Watch a short video to see what the job is like.Complete our online application process.Receive your job offer and

Ability to read printed and digital documents, spreadsheets, building plans, and blueprints.

A global leader in supporting large-scale construction projects across infrastructure, commercial, and industrial sectors.It focuses on delivering safe, efficient, and customized systems backed by engineering expertise and on-site technical support.The ideal candidate will promote company safety ini

May be required to setup and operate multiple machining operations including but not limited to: lathe, drill press, grinder, and other metalworking tools to make and repair parts.

Performs exterior repairs including but not limited to irrigation, signs, fence, roof, and metal siding. Performs preventive maintenance to building systems and equipment as assigned and creates equipment check sheets as requested. Manages work requests, creates spreadsheets for and maintains an inv

PrideStaff - - Responsibilities: Accurately receive and pull products to meet operational needs; Complete necessary paperwork and submit to appropriate department; Review inventory discrepancies and notify the Manager; Rack and tag merchandise for easy access and traceability; Collaborate with Ware

Baldor Specialty Foods - 155 Food Center Drive - Responsibilities: Select and handle product carefully; Build pallets and shrink wrap; Operate forklift and pallet jack; Receive and pick orders from order sheet; Maintain clean, safe workspace and comply with safety regulations.

Responsibilities: Loading and unloading of goods; Selecting and palletizing inventory; Auditing and repacking; Sorting and housekeeping; Duties as assigned by site leadership.

CMA CGM Group - - Responsibilities: Develop and provide excellent customer service to internal and external customers; Execute manual labor functions such as picking inventory and loading goods; Coordinate receipt, storage, and distribution of materials; Prepare and assemble orders and move materia