Sheet metal jobs in Rochester, New YorkCreate job alerts

Job Description Job Title: Construction Laborer Job Description This role supports experienced plumbing and HVAC technicians on commercial construction projects by assisting with material staging, basic installations, and general labor tasks. You will work closely with skilled tradespeople, learn the plumbing and HVAC trades on the job, and build a long-term career as a technician. The position is ideal for individuals with construction experience who are motivated to develop new technical skills and grow within the industry. Responsibilities • Assist plumbing and HVAC technicians with day-to-day tasks on commercial construction job sites., • Stage and organize materials, tools, and equipment needed for plumbing and HVAC installations., • Use basic hand tools and power tools safely and correctly to support installation and construction activities., • Help with installation tasks related to plumbing and HVAC systems under the guidance of skilled technicians., • Perform general labor duties such as lifting, carrying, and positioning materials and equipment., • Support the new construction department by completing assigned tasks efficiently and on schedule., • Follow safety procedures and site rules, including compliance with OSHA standards and company policies., • Maintain a clean, organized, and safe work area on job sites., • Travel reliably to and from various commercial construction job sites as scheduled., • Demonstrate a strong work ethic, willingness to learn, and drive to grow into a long-term plumbing or HVAC technician role. Essential Skills • At least 1 year of construction experience with a strong interest in entering the plumbing or HVAC trade., • Experience performing general labor duties on construction sites., • Ability to use basic hand tools safely and effectively., • Ability to use basic power tools safely and effectively., • Reliability and consistent attendance, including dependable transportation to and from job sites., • Willingness to obtain OSHA 10 certification if not already held., • Strong work ethic and motivation to develop into a long-term plumbing or HVAC technician., • Ability to work effectively on commercial construction projects as part of a team. Additional Skills & Qualifications • Previous experience as a construction laborer., • Exposure to plumbing or HVAC work in a commercial construction setting., • Familiarity with sheet metal work., • Interest in developing skills as a plumber or HVAC technician., • Comfort working with a variety of hand tools and power tools., • Ability to follow instructions from skilled technicians and supervisors., • Willingness to participate in ongoing training and skill development., • Valid OSHA 10 certification is a plus if already obtained. Why Work Here? The organization offers a comprehensive benefits package that supports both your professional growth and personal well-being. You can access medical, dental, and vision insurance, as well as life and disability coverage and supplemental insurance options. The company promotes financial security through a 401(k) plan and rewards your time and commitment with paid holidays and paid time off. You can also enjoy company social outings that foster team connection and a positive culture. For eligible employees, a company vehicle and a tool reimbursement program may be available, reflecting a strong investment in your success and career development. Work Environment You will work on commercial construction job sites across the Rochester area. The schedule typically runs Monday through Friday from 7:00 a.m. to 3:30 p.m., with opportunities for additional hours as project needs arise. The environment is hands-on and field-based, involving active work with hand tools, power tools, and materials related to plumbing, HVAC, and general construction. You will collaborate closely with skilled technicians and other crew members in a structured, safety-focused setting that emphasizes adherence to OSHA standards and safe work practices. Job Type & Location This is a Permanent position based out of Rochester, NY. Pay and Benefits The pay range for this position is $19.00 - $23.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Rochester,NY. Application Deadline This position is anticipated to close on Aug 17, 2026. About Aerotek Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools. \nCompany Description We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow. We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job DescriptionPEKO Precision Products: We Make Products That Matter PEKO is a full-service, debt-free, privately-owned contract manufacturer with over 60 years embedded in the Rochester, NY community. In collaboration with our valued business partners, we deliver new product development (NPI) strategies for product commercialization and provide solutions in the medical, industrial, defense, and renewable energy industries. Enriching life is a crucial component of what we do daily. The Opportunity: Welder Your Role: The welder is responsible for welding various sheet metal parts to both commercial, AWS and ASME standards via customer drawings. The welder will use the following processes GTAW, GMAW-S and GMAW-P on common base metals such as, but not limited to Aluminum, Stainless Steel and Cold Rolled Steel. Reports To: Welding Supervisor Essential Functions: • Weld components using various techniques, • Follow and comply with all safety and work rules and regulations, • Proficiency with metal fabrication tools that are common with the Welding industry., • Maintain departmental housekeeping standards, • Good organizational, communication and problem-solving skills, • Proficiently read and interpret blueprints and technical drawings, • Perform quality checks to ensure that fabricated metal components meet the required standards and specifications., • Collaborate and work with team members to complete projects on time and according to customer requirements., • Rig and lift heavy objects safely, • Additional duties as needed and assigned. Required Qualifications: • 3+ years MIG/TIG welding experience and/or technical school or equivalent combination., • Highschool, GED or equivalent is required, • Familiarity with AWS standards preferred, • Proven experience as a fabricator/welder or similar role, • Understanding of welding symbols, • Knowledge of relevant codes, standards, and safety regulations Work Authorization: US Persons PEKO Perks: • Competitive Total Rewards, • Tuition Reimbursement (IRS Allowable pre-tax Max), • 401K, Medical, Dental, Vision, • Flexible Spending & Health Savings Accounts, • Life, Short and Long-Term Disability, • Recognition Awards & Discretionary Benefits Our Core Values: • Compassion: We care for our talented and loyal PEKO family., • Safety: A commitment to providing a safe, clean, and positive workplace., • Integrity: We believe in transparency, honesty, and respect for all stakeholders., • Agility: We are dedicated to a financially prudent organization., • Endurance: Fostering the belief that PEKO people are resilient problem-solvers impacting the future., • Get a glimpse of why we are #PEKOProud: #PEKOProud - YouTube Other: • This position may require you to follow other job-related instructions and to perform other job-related duties as requested or assigned, subject to all applicable state and federal laws. Duties, responsibilities, and activities may change at any time with or without notice., • For more available opportunities at PEKO, please visit our website: Jobs & Career Opportunities | Rochester NY | PEKO Precision Products A reasonable estimate of the compensation range for this position is $21.00 - $29.00 per hour. The wage range for this role considers a wide range of factors when making compensation decisions including skill sets; experience and training; licensure and certifications; and other business and organizational requirements. PEKO Precision Products, Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfers, leaves of absence, compensation and training. Powered by JazzHR 0gZl30JUWA

Job Description METAL FINISHER Advantech Industries Inc. is a family-owned manufacturing company based in Rochester, New York, specializing in CNC machining, sheet metal fabrication, welding, and assembly services. The company, founded in 2002, serves multiple industries, including defense, medical, and aerospace, and operates out of a 250,000-square-foot facility. Advantech Industries Inc. is currently recruiting a Metal Finisher. DUTIES & RESPONSIBILITIES The Metal Finisher is responsible for reviewing blueprints and work orders to understand the product specifications, such as dimensions, tolerances, quantities, tolling instructions and fixturing. Duties include, but are not limited to, the following: • Sets up and operates machinery that grinds, smooths and buffs metal parts to achieve the specified finish., • Hand and power tools are also used to smooth burrs and sharp edges., • Will visually inspect, move, count, tag and pack parts., • May use micrometers and gauges to inspect parts., • Records job data on work order throughout processes. SKILLS & QUALIFICATIONS • With limited supervision and quality work ethic, functions as a member of a customer-driven quality team whose goal is to ensure that product quality requirements established by the customer have been achieved., • Holds oneself accountable for doing whatever is needed to meet the commitments made around project outcomes., • Maintains adequate levels of performance and motivation despite job tasks that are routine, repetitive, and/or non-stimulating., • Ability to understand and carry out oral and written directives., • Ability to work well under pressure, to adhere to deadlines and the ability to be flexible., • Thorough operational knowledge and skills of specific equipment to be operated., • Ability to operate assigned equipment safely and efficiently., • Ability to keep record of time spent and material used., • Ability to use precision measuring tools and equipment, read drawings and blueprints, and be familiar with common machine tools., • Ability to add, subtract, multiply and divide in all units of measure, using whole numbers, common fractions and decimals. JOB BENEFITS • Vacation, • Sick Days, • Holidays, • Health Insurance, • Dental Insurance, • Vision Insurance, • Life Insurance, • Voluntary Disability Insurance, • 401(k) Plan with Company Match According to the New York Pay Transparency law, pay range for this job is $19.00 - $25.00 / hour. The actual compensation will be determined based on experience and other factors permitted by law. Advantech Industries Inc. is a Drug-Free Workplace. Employment is contingent upon the successful completion of a pre-employment drug screen. ITAR Restricted: This position is restricted to US Citizens, Permanent Residents or Green Card Holders EOE/AA Race/Color/Sex/Religion/National Origin/Disability/Veteran Advantech Industries Inc. is committed to providing a work environment that is free from unlawful discrimination and harassment in any form and will make reasonable accommodation for qualified individuals with disabilities unless doing so would result in an undue hardship. If you are interested in applying for employment and feel you need a reasonable accommodation pursuant to the ADA, you are encouraged to contact Human Resources. Monday through Friday 7:30 am to 4:00 pm Full time employment

Job Description WELDER/FABRICATOR Advantech Industries Inc. is a family-owned manufacturing company based in Rochester, New York, specializing in CNC machining, sheet metal fabrication, welding, and assembly services. The company, founded in 2002, serves multiple industries, including defense, medical, and aerospace, and operates out of a 250,000-square-foot facility. Advantech Industries Inc. is currently recruiting a high-level Welder/Fabricator to fabricate ferrous and non-ferrous components for our customers. DUTIES & RESPONSIBILITIES As a Welder/Fabricator you will be responsible for reading and interpreting engineering blueprints, fabricating components or structures and performing in-process quality checks on finished products. Duties include, but are not limited to, the following: • Perform MIG, TIG, robotic, and spot welding to join components and produce consistent, straight weld beads., • Read and interpret blueprints to ensure accuracy of welds and adherence to specifications., • Set up and operate one or more work centers to support production requirements., • Grind and finish welded parts to meet quality standards., • Pull parts in and out of work areas as needed to maintain workflow. SKILLS & QUALIFICATIONS • Ability to TIG/MIG weld steel, stainless steel, and aluminum., • Proficiency with metal fabrication tools that are common within the welding industry., • Ability to lift and manipulate large metal objects., • Familiarity with conducting in-process inspections using measuring devices such as calipers and height gages., • Alignment with the requirements and principles of the Advantech Quality Management System and ISO 9001:2015., • Skills to operate assigned equipment safely and efficiently., • Capacity to handle changes in business operations and adjust to new situations., • Preparedness to sit or stand for an extended period, lift or move heavy items, and operate welding equipment., • Ability to work with limited supervision., • A High School Diploma or equivalent required., • A minimum of 5 years of welding/fabrication experience., • AWS certification a plus. JOB BENEFITS • Vacation, • Sick Days, • Holidays, • Health Insurance, • Dental Insurance, • Vision Insurance, • Life Insurance, • Voluntary Disability Insurance, • 401(k) Plan with Company Match According to the New York Pay Transparency law, pay range for this job is $18.00 - $37.00 / hour. The actual compensation will be determined based on experience and other factors permitted by law. Advantech Industries Inc. is a Drug-Free Workplace. Employment is contingent upon the successful completion of a pre-employment drug screen. ITAR Restricted: This position is restricted to US Citizens, Permanent Residents or Green Card Holders EOE/AA Race/Color/Sex/Religion/National Origin/Disability/Veteran Advantech Industries Inc. is committed to providing a work environment that is free from unlawful discrimination and harassment in any form and will make reasonable accommodation for qualified individuals with disabilities unless doing so would result in an undue hardship. If you are interested in applying for employment and feel you need a reasonable accommodation pursuant to the ADA, you are encouraged to contact Human Resources. Monday through Friday 7:30 am to 4:30 pm Full Time Employment

Job Description Cannon Industries A global company with headquarters in Rochester, New York, Cannon Industries has grown to become one of the leading sheet metal and custom weld fabricators in the contract manufacturing industry. Our quality standards are unsurpassed in the industry because we know that our customers’ standards grow with each passing year. Computer controlled processes, operators and technicians with decades of experience, and strict procedures for quality control have led Cannon Industries to step ahead of the competition, by earning ISO:9001, ISO:14001 and TS:16949 certifications. Cannon Industries, Inc. is a drug, smoke and alcohol-free working environment. General Job Description Under the direction of the Welding Group Leader or Supervisor, the Welder works from customer drawings and a traveler to fabricate and weld components to produce the highest quality products at the lowest cost, while meeting departmental performance standards, customer specifications and delivery requirements, in accordance with company policies and procedures. A Class A Welder is capable of performing all aspects of welding. Can weld any type of project while consistently meeting or exceeding cycle times. Have the ability to fabricate from prints without the aid of fixtures. Able to do prototypes while also working with engineering to develop fixtures. Capable of being certified. Requires little to no supervisor and has the ability to interpret blueprints and understands weld symbols at an advanced level. Minimum Qualifications: • Job knowledge through suitable education or prior work experience, • Have the ability to regularly lift and/or move 25-50 pounds, • Meet minimum 20/20 vision standards (with corrective lenses if needed), • Score a minimum score on the in-house welding test, • Knowledge on how to set-up weld machine and lay a quality bead for both Mig and Tig, • Ability to read and understand blueprints and weld symbols at an advanced level, • Knowledge of the metric system preferred, • Accurately measure and lay out locations for welded components, • Adjust weld as needed to accommodate varying thicknesses of steel, • Operate grinder, drill, band saw, torch, • Complete and maintain all required paperwork, records, documentation, etc., • Follow and comply with all safety and work rules and regulations. Maintain departmental housekeeping standards Specific Duties: • Using MIG and/or TIG, weld components together according to blueprints and Traveler, • While performing the duties of this job, the employee is regularly required to stand, use hands, stoop, kneel, or crouch., • Specific vision abilities required by this job include close vision, peripheral vision, depth perception, and ability to adjust focus., • Must work at a reasonable pace (measured by production efficiency) and within our quality standards to insure timely completion, • Check and verify part numbers prior to assembly of product to customer specifications, • Notify supervisor of part shortages before the part runs out Protective clothing/equipment requirement: • Must supply his/her own welding helmet and safety shoes, • Requires the use of safety glasses and shoes, welding helmet, grinding shield, tight-fitting clothing without tears, hearing protection and gloves This list of duties and responsibilities is not intended to be all-inclusive and may be expanded to include other duties and responsibilities as it may be deemed necessary.

Job DescriptionPEKO Precision Products: We Make Products That Matter PEKO is a full-service, debt-free, privately-owned contract manufacturer with over 50 years embedded in the Rochester, NY community. In collaboration with our valued business partners, we deliver new product introduction (NPI) strategies for product commercialization and provide solutions in the medical, industrial, defense, and renewable energy industries. Enriching life is a crucial component of what we do daily. The Opportunity: Press Brake Operator PRIMARY FUNCTION: The Press Brake Operator is responsible for the set-up, adjustment, and operation of our press brake machines to perform a wide variety of prototype jobs, short run parts, and long run parts. The operator will need to inspect parts and make adjustments to ensure adherence to quality standards. May also be asked to help in other areas such as: machining, pemming, laser/deburring. ESSENTIAL FUNCTIONS: • Set up, run, and adjust machines to ensure quality parts, • Read blueprints and apply knowledge of GD&T principles., • Works independently and with team members to help get difficult jobs done., • Able to float and help in different sheet metal departments as needed. Reports To: Sheet Metal Supervisor Basic Qualifications: • 2+ years of press brake experience, • High school diploma or equivalent, • Attention to detailPreferred Qualifications:, • Knowledge of Amada-type machines a plus, • Panel bender and slip roll knowledge a plusWork Authorization:, • US Persons, • Must be able to work in the United States without corporate sponsorship now and in the futurePEKO Perks:, • Competitive Total Rewards, • Tuition Reimbursement (IRS Allowable pre-tax Max), • 401K, Medical, Dental, Vision, • Flexible Spending & Health Savings Accounts, • Life, Short and Long-Term Disability, • Recognition Awards & Discretionary Benefits Our Core Values: Agility We are committed to maintaining a financially prudent and adaptable organization, ready to meet evolving challenges with confidence. Compassion We care deeply for our talented and loyal PEKO family, fostering a supportive and inclusive workplace culture. Endurance We believe in the resilience of our people—problem solvers who shape the future through perseverance and innovation. Integrity We uphold transparency, honesty, and respect in all interactions with employees, customers, and stakeholders. Safety We prioritize a safe, clean, and positive work environment where every team member can thrive. Salary Range: A reasonable estimate of the compensation range for this position is $24-$28/hour. The wage range for this role considers a wide range of factors when making compensation decisions, including skill sets, experience and training, licensure and certifications, as well as other business and organizational requirements. Other: • This position may require you to follow other job-related instructions and to perform other job-related duties as requested or assigned, subject to all applicable state and federal laws. Duties, responsibilities, and activities are subject to change at any time, with or without notice., • Project a positive and professional image of the company and of management to employees at all levels. For more available opportunities at PEKO, please visit our website: Jobs & Career Opportunities | Rochester NY | PEKO Precision Products Get a glimpse of why we are #PEKOProud: #PEKOProud - YouTube https://youtu.be/dDT1Cp908ns PEKO Precision Products, Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfers, leaves of absence, compensation and training. Powered by JazzHR CTvLGoTeB6

Job Description PRESS BRAKE SET UP/OPERATOR Advantech Industries Inc. is a family-owned manufacturing company based in Rochester, New York, specializing in CNC machining, sheet metal fabrication, welding, and assembly services. The company, founded in 2002, serves multiple industries, including defense, medical, and aerospace, and operates out of a 250,000-square-foot facility. Advantech Industries Inc. is currently recruiting a Press Brake Set Up/Operator. DUTIES & RESPONSIBILITIES The Press Brake Set Up/Operator is responsible for the set up and observation of machines to verify the accuracy of the machine settings and to detect the malfunction or out-of-tolerance machining, by using precision measuring instruments such as micrometers and calipers. Duties include, but are not limited to, the following: • Set-up an Amada Press Brake machine following the project details and blueprints., • Observe machine operation to verify accuracy of machine settings and to detect malfunctions or out-of-tolerance machining., • Inspect "first-part", consult with quality assurance and inspect work pieces throughout the production run for out of tolerance machining., • Using precision measuring instruments such as micrometer and dial caliper, ensure quality products are produced according to project specifications., • Periodically operate power roller conveyor and do work by hand. SKILLS & QUALIFICATIONS • With limited supervision and quality work ethic, function as a member of a customer-driven team whose goal is to ensure that product quality requirements established by the customer have been achieved., • Hold oneself accountable for doing whatever is needed to meet the commitments made around project outcomes., • Maintain adequate levels of performance and motivation despite job tasks that are routine, repetitive, and/or non-stimulating., • Ability to understand and carry out oral and written directives., • Ability to work well under pressure, to adhere to deadlines and the ability to be flexible., • Thorough operational knowledge and skills of press brake equipment to be operated, including inspection equipment., • Ability to operate assigned equipment safely and efficiently., • Ability to keep record of time spent and material used., • Ability to use precision measuring tools such as calipers., • Ability to add, subtract, multiply and divide in all units of measure, using whole numbers, common fractions and decimals., • High School Diploma or equivalent required., • 5 years of experience in manufacturing. JOB BENEFITS • Vacation, • Sick Days, • Holidays, • Health Insurance, • Dental Insurance, • Vision Insurance, • Life Insurance, • Voluntary Disability Insurance, • 401(k) Plan with Company Match According to the New York Pay Transparency law, pay range for this job is $23.00 - $32.00 / hour. The actual compensation will be determined based on experience and other factors permitted by law. Advantech Industries Inc. is a Drug-Free Workplace. Employment is contingent upon the successful completion of a pre-employment drug screen. ITAR Restricted: This position is restricted to US Citizens, Permanent Residents or Green Card Holders EOE/AA Race/Color/Sex/Religion/National Origin/Disability/Veteran Advantech Industries Inc. is committed to providing a work environment that is free from unlawful discrimination and harassment in any form and will make reasonable accommodation for qualified individuals with disabilities unless doing so would result in an undue hardship. If you are interested in applying for employment and feel you need a reasonable accommodation pursuant to the ADA, you are encouraged to contact Human Resources. Monday through Friday 7:30 am to 4:00 pm Full time employment

Job Description Cannon Industries A global company with headquarters in Rochester, New York, Cannon Industries has grown to become one of the leading sheet metal and custom weld fabricators in the contract manufacturing industry. Our quality standards are unsurpassed in the industry because we know that our customers’ standards grow with each passing year. Computer controlled processes, operators and technicians with decades of experience, and strict procedures for quality control have led Cannon Industries to step ahead of the competition, by earning QS:9000, ISO:9002, and TS:16949 certifications. Cannon Industries, Inc. is a drug, smoke and alcohol-free working environment. General Job Description: Sets up and operates horizontal and vertical CNC mills. Requires only general supervision. Minimum Qualifications: • Job knowledge through suitable education or prior work experience, • Able to read blueprints, • 4th axis experience, • Programming a must, • Know correct speeds and feeds, tooling, design and manufacturing of fixtures Specific Duties: • Program and Set up horizontal & vertical CNC mills, • Make proper set-up to give rigidity to work piece, • Work with materials such as cast iron, steel, bronze, brass and other non-ferrous materials, • Hold tolerance of .003 inch, • Manufacture and inspect blueprint, • Upkeep daily preventative maintenance log Physical Demands: • Must be able to lift up to 50 lbs. regularly, • Requires frequent bending, stooping, squatting, pushing and pulling of parts and part containers, • May be required to stand for long periods of time, • May involve some repetitive motions, • Due to the open environment of the warehouse, must be able to work in various weather and temperature conditions to include extreme heat, humidity and cold This list of duties and responsibilities is not intended to be all-inclusive and may be expanded to include other duties and responsibilities as it may be deemed necessary. Benefits • 401(K), • Health Insurance, • Paid time off, • Vision Insurance, • Dental Insurance, • Life Insurance

Job DescriptionWe are a growing HVAC contracting company specializing in new construction installations, complete system replacements, HVAC redesign projects, service repairs, and preventative maintenance. We pride ourselves on quality workmanship, professionalism, and providing energy-efficient comfort solutions for our customers. We are seeking a skilled HVAC Installation & Service Technician to join our team. This role is primarily focused on new system installations, equipment replacements, and redesigning existing HVAC systems, while also supporting service and maintenance operations as needed. Responsibilities • Install heating, cooling, ventilation, and indoor air quality systems in new construction and existing buildings., • Remove and replace outdated HVAC equipment., • Modify and redesign ductwork and HVAC layouts to improve system performance and efficiency., • Perform startup, testing, balancing, and commissioning of HVAC equipment., • Diagnose and repair HVAC system issues when required., • Conduct preventative maintenance on residential and light commercial systems., • Ensure all work complies with local codes, manufacturer requirements, and company quality standards., • Communicate professionally with customers, contractors, and team members., • Complete job documentation and maintain accurate records. Qualifications • 2-5 years of HVAC installation experience preferred., • Experience with new construction, retrofits, and system replacement projects., • Ability to layout and install ductwork and equipment., • Valid driver's license with a clean driving record., • Strong mechanical aptitude and troubleshooting skills., • Ability to safely use hand and power tools., • Ability to lift 50+ pounds and work in attics, crawl spaces, rooftops, and construction environments. Preferred Qualifications • NATE Certification., • Experience with residential and light commercial projects., • Sheet metal fabrication experience., • Experience with heat pumps, high-efficiency furnaces, and VRF/mini-split systems. What We Offer • Competitive wages and overtime opportunities., • Steady year-round work., • Health insurance and retirement benefits., • Paid holidays and vacation., • Company vehicle negotiable, • Opportunities for advancement into Lead Installer or Project Supervisor roles.

Job DescriptionDescriptionPosition Overview Kennedy Mechanical is a well-established company committed to quality workmanship, customer satisfaction, and employee development! We are seeking a skilled and dependable HVAC Installer to join our team due to growth. We provide challenging and consistent year-round work, the opportunity for advancement, training, and a safe work environment. We offer competitive pay (based on experience), paid holidays, paid time off, and industry leading benefits. Responsibilities • Perform installation of HVAC related equipment, • Carry out wiring of both low and line voltage to cooling and heating equipment, • Read and interpret blueprints, schematics, and installation manuals, • Ensure proper sizing, placement, and setup of equipment, • Perform installation of copper refrigerant lines to air conditioning units, including brazing and soldering, • Perform installation of flex and sheet metal duct systems in light commercial and residential buildings, • Fabricate/ connection of gas lines to heating equipment, • Provide necessary support to other team members to be able to complete tasks on time, • Create and maintain cordial and collaborative working relationships, • Follow all safety procedures and company policies Qualifications • 2+ years of HVAC Installation experience preferred, • Possess effective verbal and written communication skills, • Must have an honest and dependable personality, • Strong mechanical aptitude and problem-solving skills, • Strong ability to distinguish between various HVAC equipment, • Self-motivated individual with strong ability to follow instructions and work alone, as well as work effectively within a team, • Ability to lift items weighing 50+ pounds safely, • Ability to climb ladders, stoop, balance, crouch, crawl, or/and kneel continually Benefits • Competitive pay based on experience, • Health, dental, and vision insurance, • 401(k) with company match, • Paid time off (PTO) and paid holidays, • Company paid short- and long-term disability, • Company paid life insurance, • Company vehicle (for applicable roles), • Supportive team environment and strong safety culture

Job Description General Job Summary: This position involves all phases of the laser turret combo operation, including tool building, repair, set-up and operation to complete sheet metal production per work instructions/blueprint specifications. Essential Duties and Responsibilities: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individual with disabilities to perform the essential job functions. • Refers to production control document/blueprint for job specifics., • Builds and repairs tools per job specifications., • Sets up machine to run job., • Installs and removes required tools for job., • Loads sheet metal on machine., • Runs program and observes operation., • May make minor adjustments in the computer program as necessary., • Unloads finished pieces and inspects per specifications of job., • De-burrs and buffs pieces as needed., • Assists with other duties as assigned by supervisor/ manager. Supervisory Responsibilities: None Education Experience High school diploma or general education degree (GED) 2-3 years related experience or trainingOne-year certificate from college or technical school preferred or equivalent combination of education and experience. Computer Skills: Ability to use computer for operation purposes as well as understand use of CNC machine controller. Other Requirements: Ability to use calipers and micrometers, hand jacks and grinders. Ability to read blueprints. Knowledge of CNC. Ability to program is a plus. Language Skills: Intermediate Skills: Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers or Associates of organization. Mathematical Skills: Basic Skills: Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, https://mcalpinind.sharepoint.com/sites/HRSharepointTeam/Shared Documents/General/Job Descriptions/Grade 9/911 CNC Operator Set up updated 2-13.doc common fractions, and decimals. Reasoning Ability: Intermediate Skills: Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. Physical Demands: The physical demands described here are representative of those that must be met by an Associate to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.While performing the duties of this job the Associate is regularly required to stand; walk; sit; maneuver through the office and factory; use hands to finger, handle, or feel; reach with hands and arms; grasping and twisting; talk or hear; lift and/or move equipment/product weighing up to 50 pounds. Work with another associate to lift anything greater than 50lbs PPE Must wear safety glasses with side shields and steel toe/composite shoes while on the production floor. Gloves may be required if handling parts. Hearing protection is required in designated areas. Work Environment: The work environment characteristics described here are representative of those Associate encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform within the described work environment.While performing the duties of this job the Associate is regularly exposed to extreme heat; extreme cold; wet and/or humid conditions. While performing the duties of this job the noise level in the work environment is usually loud.This job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee. Duties, responsibilities, and activities may change at any time with or without notice You should be proficient in: • CNC Tooling, • CNC Machine Setup & Changeover, • Machine Setups for Production Runs

Job Description Cannon Industries A global company with headquarters in Rochester, New York, Cannon Industries has grown to become one of the leading sheet metal and custom weld fabricators in the contract manufacturing industry. Our quality standards are unsurpassed in the industry because we know that our customers’ standards grow with each passing year. Computer controlled processes, operators and technicians with decades of experience, and strict procedures for quality control have led Cannon Industries to step ahead of the competition, by earning QS:9000, ISO:9002, and TS:16949 certifications. Cannon Industries, Inc. is a drug, smoke and alcohol-free working environment. General Job Description: Performs duties of an expediting nature, including close follow-up in operational details to assure timely processing and shipment of parts and production with established schedules and priorities. Keeps supervision informed at all times of work in process, status. Contacts clerical engineering and supervisory personnel as required or as assigned to provide assistance in resolving problems and ensuring timely action with respect to such things as material procurement, parts scheduling, dispatching, assembly, inspection and shipment of products. Minimum Qualifications: • Entry level, high school diploma or equivalent, • Minimum 1-year manufacturing knowledge and/or production control experience, • QA inspection experience helpful, • Fluent in verbal and written English, • Must be Forklift Certified Specific Duties: • Provide material support to work center, • Pull kits of raw materials for work orders and issue them to work centers, • Stage job materials to be shipped for outside operation, • Move in-process materials between work centers, QA and shipping/receiving to efficiently facilitate production and finished goods availability, • Assure conformance to all materials handling, identification and storage policies, • Assist in maintaining accurate inventory records, • Assist in performing all inventory transactions on the computer system, • Assist in performing shipping and receiving activities and preparation of related paperwork, • Recommend continuous improvement actions for improving work processes

Job Description TOOL CRIB ATTENDANT Advantech Industries Inc. is a family-owned manufacturing company based in Rochester, New York, specializing in CNC machining, sheet metal fabrication, welding, and assembly services. The company, founded in 2002, serves multiple industries, including defense, medical, and aerospace, and operates out of a 250,000-square-foot facility. Advantech Industries Inc. is currently seeking a Tool Crib Attendant. DUTIES & RESPONSIBILITIES Reporting directly to the Plant Manager, this position is responsible for maintaining accurate inventory of all shop tools and equipment as well as repairing or replacing tools/equipment as needed. The person in this position assists the work group in the areas of manufacturing to specifications, meeting quality requirements and meeting production requirements. Duties include, but are not limited to, the following: • Maintain tracking system of all shop tools & equipment inventory., • Investigate tool quality problems and recommend and/or implement changes or improvements in tooling processes or methods etc., • Maintain working relationships with outside tooling vendors., • Receive requisition requests from different departments, gather items requested and keep records of items dispensed from and returned to tool crib., • Maintain minimum quantities of commonly used tools and equipment., • Ensure compliance of Federal (OSHA), State, and Local safety laws., • Responsible for ensuring accurate inventory by reviewing inventory summaries and details., • Assist and train attendants who possess less experience or fewer skills., • Ensures proper preventative maintenance and repairs of all tools and equipment., • Secure diagnostic and/or repair work from outside repair facilities, if required. SKILLS & QUALIFICATIONS • Must have a thorough knowledge of tooling for CNC machines., • With limited supervision and quality work ethic, functions as a member of a customer-driven quality team whose goal is to ensure that products quality requirements established by the customer have been achieved., • Holds oneself accountable for doing whatever is needed to meet the commitments made around project outcomes., • Maintains adequate levels of performance and motivation despite job tasks that are routine, repetitive, and/or non-stimulating., • Ability to understand and carry out oral and written directives., • Ability to work well under pressure, to adhere to deadlines and the ability to be flexible., • Ability to add, subtract, multiply and divide in all units of measure, using whole numbers, common fractions and decimals., • Sufficient computer skills to keep inventory records accurate., • High School Diploma or equivalent required. JOB BENEFITS • Vacation, • Sick Days, • Holidays, • Health Insurance, • Dental Insurance, • Vision Insurance, • Life Insurance, • Voluntary Disability Insurance, • 401(k) Plan with Company Match According to the New York Pay Transparency law, pay range for this job is $17.00 - $27.00 / hour. The actual compensation will be determined based on experience and other factors permitted by law. Advantech Industries Inc. is a Drug-Free Workplace. Employment is contingent upon the successful completion of a pre-employment drug screen. ITAR Restricted: This position is restricted to US Citizens, Permanent Residents or Green Card Holders EOE/AA Race/Color/Sex/Religion/National Origin/Disability/Veteran Advantech Industries Inc. is committed to providing a work environment that is free from unlawful discrimination and harassment in any form and will make reasonable accommodation for qualified individuals with disabilities unless doing so would result in an undue hardship. If you are interested in applying for employment and feel you need a reasonable accommodation pursuant to the ADA, you are encouraged to contact Human Resources. Monday through Friday 7:30 am to 4:00 pm Full time employment

Job Description Position:Manufacturing Floater Reports to:Plant Manager & Facility Group Leader Cannon Industries A global company with headquarters in Rochester, New York, Cannon Industries has grown to become one of the leading sheet metal and custom weld fabricators in the contract manufacturing industry. Our quality standards are unsurpassed in the industry because we know that our customers’ standards grow with each passing year. Computer controlled processes, operators and technicians with decades of experience, and strict procedures for quality control have led Cannon Industries to step ahead of the competition, by earning ISO:9001, ISO:14001 and TS:16949 certifications. Cannon Industries, Inc. is a drug, smoke and alcohol free working environment. General Job Description Under the direction of the Plant Supervisor, floats between manufacturing departments depending on where the biggest need are at the time. May perform duties for rework, in Welding, CNC, Punch Press, Brake Press, Laser, Turret, Finishing/Grinding, Shipping and Receiving, and Assembly. Minimum Qualifications: -Have the ability to constantly lift and/or move 1-50 pounds -Knowledge of how to read and understand blueprints preferred -Knowledge of the metric system preferred -Complete and maintain all required paperwork, records, documentation, etc. -Follow and comply with all safety and work rules and regulations. Maintain departmental housekeeping standards Specific Duties: 1.Safely operates machinery in various departments to help meet production goals. 2.Operates machinery in various departments to help meet production goals, including Machine Operator, Assembly, Spot Welding & Grinding 3.Works with Plant Manager to determine where he/she should work that day 4.Meet quality and performance measures in accordance with Company standards 5.Ability to be flexible and perform a wide variety of functions within a working day Protective clothing/equipment requirement: -This position requires frequent walking, standing, bending (neck & waist), sitting, squatting, climbing, kneeling, twisting (neck & waist), and using both the dominate and non-dominate hands -Constant lifting and/or moving between 1-50 lbs, regular lifting and/or moving between 51-75 lbs, and occasional lifting and/or moving between 76-100 lbs required -Regularly works around heavy machinery equipment, -Exposure to extreme temperatures, humidity, and heights -Requires the use of safety glasses and shoes, tight-fitting clothing without tears, hearing protection and gloves

Job Description CNC PROGRAMMER Advantech Industries Inc. is a family-owned manufacturing company based in Rochester, New York, specializing in CNC machining, sheet metal fabrication, welding, and assembly services. The company, founded in 2002, serves multiple industries, including defense, medical, and aerospace, and operates out of a 250,000-square-foot facility. Advantech Industries Inc. is currently recruiting CNC Programmers. DUTIES & RESPONSIBILITIES The CNC Programmer is responsible for generating programs for milling centers, turning centers and multi-tasking CNC equipment, while updating and managing CNC programs and manufacturing processes to consistently produce precision products. Duties include, but are not limited to, the following: • Use CAD skills to create work holding and fixturing layouts, program CNC machine tools using Solid Works and Mastercam Programming software, and create geometry as needed., • Generate programs for milling centers, turning centers and muti-tasking CNC equipment., • Update and manage CNC programs and manufacturing processes to consistently produce a precision product., • Create manufacturing tool list for CNC programs. SKILLS & QUALIFICATIONS • With limited supervision and quality work ethic, functions as a member of a customer-driven quality team whose goal is to ensure that product quality requirements established by the customer have been achieved., • Superior communication skills and ability to develop teamwork among staff; interface with department supervisors and machinists on a regular basis., • Must be diplomatic and possess good human interaction skills., • Holds oneself accountable for doing whatever is needed to meet the commitments made around project outcomes., • Ability to multitask using the appropriate level of priority setting., • Maintains adequate levels of performance and motivation despite job tasks that are routine, repetitive, and/or non-stimulating., • Ability to work well under pressure, to adhere to deadlines and the ability to be flexible., • Must be proficient with Solid Works and Mastercam., • Experience with Mazatrol and Fanuc a plus., • Must be proficient in cutting speeds and feeds., • Ability to operate assigned equipment safely and efficiently., • Ability to keep record of time spent and material used., • Ability to use precision measuring tools and equipment, read drawings and blueprints, and be familiar with common machine tool., • Ability to add, subtract, multiply and divide in all units of measure, using whole numbers, common fractions and decimals., • High School Diploma or equivalent required. Associate's degree in industrial technologies preferred., • Minimum 5 years of experience. JOB BENEFITS • Vacation, • Sick Days, • Holidays, • Health Insurance, • Dental Insurance, • Vision Insurance, • Life Insurance, • Voluntary Disability Insurance, • 401(k) Plan with Company Match According to the New York Pay Transparency law, pay range for this job is $28.00 - $43.00 / hour. The actual compensation will be determined based on experience and other factors permitted by law. Advantech Industries Inc. is a Drug-Free Workplace. Employment is contingent upon the successful completion of a pre-employment drug screen. ITAR Restricted: This position is restricted to US Citizens, Permanent Residents or Green Card Holders EOE/AA Race/Color/Sex/Religion/National Origin/Disability/Veteran Advantech Industries Inc. is committed to providing a work environment that is free from unlawful discrimination and harassment in any form and will make reasonable accommodation for qualified individuals with disabilities unless doing so would result in an undue hardship. If you are interested in applying for employment and feel you need a reasonable accommodation pursuant to the ADA, you are encouraged to contact Human Resources. Monday through Friday 7:30 am to 4:00 pm Full time employment

Job Description CNC MACHINIST - B-SHIFT Advantech Industries Inc. is a family-owned manufacturing company based in Rochester, New York, specializing in CNC machining, sheet metal fabrication, welding, and assembly services. The company, founded in 2002, serves multiple industries, including defense, medical, and aerospace, and operates out of a 250,000-square-foot facility. Advantech Industries Inc. is currently recruiting CNC Machinists for B-Shift. Hours are Monday – Thursday, 3:45pm – 2:15am. DUTIES & RESPONSIBILITIES Duties include, but are not limited to, the following: • Set up machine and observe machine operations to verify accuracy of machine settings and to detect malfunctions or out-of-tolerance machining by using precision measuring instruments such as micrometers and calipers., • Set up and control operation of computerized deburring and tooling machine to perform a variety of machining operations which include drilling, chamfering, and deburring., • Inspect "first part" and inspect work pieces throughout the production run for out-of-tolerance machining., • Clean machine and work area., • Provide aid and guidance to machine operators with less experience or skill. SKILLS & QUALIFICATIONS • With limited supervision and quality work ethic, functions as a member of a customer-driven quality team whose goal is to ensure that product quality requirements established by the customer have been achieved., • Holds oneself accountable for doing whatever is needed to meet the commitments made around project outcomes., • Maintains adequate levels of performance and motivation despite job tasks that are routine, repetitive, and/or non-stimulating., • Ability to understand and carry out oral and written directives., • Ability to work well under pressure, to adhere to deadlines and the ability to be flexible., • Thorough operational knowledge and skills of specific CNC mills and CNC lathes to be operated with the ability to calculate and set machine controls either manually or by entering commands., • Ability to operate assigned equipment safely and efficiently., • Ability to keep record of time spent and material used., • Ability to use precision measuring tools and equipment, read drawings and blueprints, and be familiar with common machine and measuring tools, including micrometers and calipers., • Ability to add, subtract, multiply and divide in all units of measure, using whole numbers, common fractions and decimals., • A High School Diploma or equivalent required., • 5 years of previous CNC setup and operation experience., • Experience on Mazak or Haas CNC Machines is preferred., • Alignment with the requirements and principles of the Advantech Quality Management System and ISO 9001: 2015., • Capacity to handle changes in business operations and adjust to new situations., • Preparedness to stand for extended periods, life heavy items, and operate equipment. JOB BENEFITS • Vacation, • Sick Days, • Holidays, • Health Insurance, • Dental Insurance, • Vision Insurance, • Life Insurance, • Voluntary Disability Insurance, • 401(k) Plan with Company Match According to the New York Pay Transparency law, pay range for this job is $23.00 - $37.00 / hour. The actual compensation will be determined based on experience and other factors permitted by law. Advantech Industries Inc. is a Drug-Free Workplace. Employment is contingent upon the successful completion of a pre-employment drug screen. ITAR Restricted: This position is restricted to US Citizens, Permanent Residents or Green Card Holders EOE/AA Race/Color/Sex/Religion/National Origin/Disability/Veteran Advantech Industries Inc. is committed to providing a work environment that is free from unlawful discrimination and harassment in any form and will make reasonable accommodation for qualified individuals with disabilities unless doing so would result in an undue hardship. If you are interested in applying for employment and feel you need a reasonable accommodation pursuant to the ADA, you are encouraged to contact Human Resources. Monday through Thursday 3:45 pm to 2:15 am Full time employment

Job Description QUALITY ENGINEER Advantech Industries, Inc. is a family-owned manufacturing company based in Rochester, New York, specializing in CNC machining, sheet metal fabrication, welding, and assembly services. The company, founded in 2002, serves multiple industries, including defense, medical, and aerospace, and operates out of a 250,000-square-foot facility. We are looking for a Quality Engineer to monitor and improve the quality of our operational processes and outputs. The Quality Engineer’s responsibilities include designing quality standards, equipment, process, and products, developing quality control systems, and determining corrective actions. You will also work with managers and supervisors to implement quality measures. A successful Quality Engineer should have excellent troubleshooting skills and be able to ensure that processes and products consistently meet established quality standards. DUTIES & RESPONSIBILITIES: • Review customer quality specification/PO flow downs, codes and technical design documents/drawings to provide an accurate inspection plan., • Participate in contract review meetings to initiate and advise on inspection plans., • Utilize HQA Inspection Manager software to bubble drawings, create FAI reports, and identify critical dimensions to be verified and recorded on an in-process inspection report., • Develop quality plans for manufacturing based on customer RFQ., • Collaborate with operations managers to develop and implement controls and improvements., • Ensure that workflows, processes, and products comply with safety regulations., • Investigate and troubleshoot product or production issues., • Develop corrective actions, solutions, and improvements., • Monitor and analyze quality performance., • Update our Quality Management System (QMS) with incidents, fixes and improvements., • Manage calibration system in Inspection Manager Software., • Assign gauging to check critical dimensions., • Work with customers regarding quality questions and issues. SKILLS & QUALIFICATIONS: • Hands on experience with Quality Management Systems (QMS) and testing methodologies., • In-depth understanding of technical documentation., • In-depth understanding of machining and sheet metal fabrication including print reading and GD&T., • Strong analytical and problem-solving skills., • Excellent project management skills., • Solid computer and organizational skills., • Ability to work well under pressure, to adhere to deadlines and the ability to be flexible., • Superior communication skills and ability to develop teamwork among staff., • Holds oneself accountable for doing whatever is needed to meet the commitments made around project outcomes., • High school diploma or GED., • 5 years of experience in Quality Engineering, Quality Assurance, or a similar role., • Additional certification in Quality Assurance is a plus. JOB BENEFITS: • Vacation, • Paid Sick Leave, • Holidays, • Health, • Dental, • Vision, • Life Insurance, • Voluntary Disability Insurance, • 401(k) Plan with company match According to the New York Pay Transparency law, pay range for this job is $25.00 - $35.00 / hour. The actual compensation will be determined based on experience and other factors permitted by law. Advantech Industries Inc. is a Drug-Free Workplace. Employment is contingent upon the successful completion of a pre-employment drug screen. ITAR Restricted: This position is restricted to US Citizens, Permanent Residents or Green Card Holders EOE/AA Race/Color/Sex/Religion/National Origin/Disability/Veteran Advantech Industries Inc. is committed to providing a work environment that is free from unlawful discrimination and harassment in any form and will make reasonable accommodations for qualified individuals with disabilities unless doing so would result in an undue hardship. If you are interested in applying for employment and feel you need a reasonable accommodation pursuant to the ADA, you are encouraged to contact Human Resources.Monday through Friday 7:30 am to 4:00 pm Full time employment (39.75 hours per week) Monday through Friday 7:30 am to 4:00 pm Full-Time employment (39.75 hours per week)

Job Description Cannon Industries A global company with headquarters in Rochester, New York, Cannon Industries has grown to become one of the leading sheet metal and custom weld fabricators in the contract manufacturing industry. Our quality standards are unsurpassed in the industry because we know that our customers’ standards grow with each passing year. Computer controlled processes, operators and technicians with decades of experience, and strict procedures for quality control have led Cannon Industries to step ahead of the competition, by earning QS:9000, ISO:9002, and TS:16949 certifications. Cannon Industries, Inc. is a drug, smoke and alcohol -free working environment. General Job Description: In this position, the Quality Technician performs dimensional and/or functional inspection on purchased materials and manufactured parts. Uses technical expertise and inspection instrumentation to verify conformance of materials/parts to prints, process sheets and specifications. Minimum Qualifications: • Know & understand the use of all inspection equipment including (but not limited to):, • Micrometers, • Calipers, • Dial Indicators, • Height Gages, • Optical Comparators, • Gage Pins and Gage Blocks, • Sine Blocks and Setups, • Surface Finish Testers, • CMM, • Thread Gages, • Understand basic Geometric Tolerance. Able to read and understand drawings, • Knowledgeable about current quality system standards such as ISO-9002 and/or TS16949, • Ability to multitask in response to numerous demands; time management skills, • Computer literate: Excel, Word, etc., • Attention to detail Desired Skills: • Experience with inspection and measuring equipment calibration, • Previous auditing experience and skills, • Experience writing procedures and work instructions, • PPAP documentation experience Specific Duties: • Perform first piece, in-process and final inspections, • Provide inspection results for inclusion PPAP's, • Understand cosmetic part requirements based on specific customer standards, • Provide inspection support based on needs of Manufacturing and Engineering Managers, • Maintain up to date documentation by completing all necessary paperwork, i.e. in-process inspection records, signing off on travelers, 1st piece inspection tags, etc., • Perform basic training as required for operator or team leader for First-Piece and In-Process Inspection, • Provide continuous feedback to Production regarding quality, engineering and manufacturing-related issues, • Suggest process improvements, • Perform part and process related internal audits, • Maintain QA Lab and equipment in clean, orderly condition, • Special projects and assignments Physical Requirements: • Regularly lifts and/or moves 25-50 lbs., • Requires frequent reaching, handling and grasping, • Requires occasional climbing of stairs, balancing, bending, crouching, fine manipulation and feeling This list of duties and responsibilities is not intended to be all-inclusive and may be expanded to include other duties and responsibilities as it may be deemed necessary. Benefits • 401(k), • Health Insurance, • Paid time off, • Vision Insurance, • Dental Insurance, • Life Insurance

Job DescriptionDescription: Summary: The CNC Machinist is responsible for the safe operation and set up of a wide variety of Computerized Numerical Control Machining Centers (CNC) or other production machines using programs and tooling that have been previously used to manufacture a product and is capable of doing this with little supervision. • Must work with Management to debug and optimize manufacturing processes for jobs or machines which they are responsible., • Must demonstrate a very high level of competency with all types of metal working equipment, both manual and CNC., • Must demonstrate the ability to debug machining processes and communicate those processes for manufacturing., • Must be able to diagnose process problems and determine the cause of the problem., • Must be able to implement corrective action to prevent reoccurrence of problems., • Must be aware of the budget and delivery requirements for work assigned to them and report to management any difficulties that would cause the cost of the work to exceed budget or miss a scheduled delivery., • Must have a thorough understanding of safe operation of metal working equipment, including but not limited to starting and stopping the machining cycle, interrupting the machine cycle, performing offsets to tool length and diameter and restarting the machining cycle., • Must have a thorough knowledge of CNC program code and be able to document and perform edits of the code to enhance machining processes., • Installs machining fixtures and tooling using Tool Sheet and Setup instructions with no supervision., • Orients fixtures and tools to machine coordinate systems, inputs machine, fixture and tool offsets., • Loads appropriate CNC program into machine control., • Loads material into holding fixtures, following verbal and/or written instructions., • Produces “first piece” from setup while observing machining cycle to prevent damage to work piece, tooling, machine or injury to operator., • Must be able to read, understand and interpret blueprints and specifications, including GD&T., • Observes and listens to machine operation to detect malfunctions, such as worn or damaged cutting tools., • Performs a variety of inspection and gaging operations to insure maintenance of quality standards and specifications and have the ability to record the results of these inspections., • Notifies supervisor of discrepancies., • Must be able to train CNC Operators in the safe operation of the machines that they have set up., • Cleans machine, tooling, and parts as instructed., • Performs daily preventative machine maintenance as instructed., • Other duties as assigned. Requirements: Education • High school diploma or general education degree (GED) required., • 5+ years related experience and/or training; or equivalent combination of education and experience required. Skills: • Ability to read and interpret documents such as safety rules, operating and maintenance instructions, procedure manuals, mechanical drawings and specifications., • Ability to write routine reports and correspondence., • Ability to speak effectively before groups of customers or employees., • Ability to add and subtract four-digit numbers and to multiply and divide., • Ability to perform these operations using units of measurement, volume, and distance. Basic understanding of Geometry and Trigonometry., • Ability to apply common sense understanding to carry out complex instructions furnished in written, oral, or diagram form., • Ability to deal with problems involving several variables in situations requiring a high level of judgment and reasoning., • Microsoft Office Suite, • Epicor Vista™ integrated manufacturing and accounting solution, • Adobe Acrobat, • Windows Operating Systems, • Internet Explorer or equivalent, • Must be able to read, understand and interpret mechanical drawings., • Working knowledge of “G” & “M” Codes is required., • Demonstrate a working understanding of CNC Machine Coordinate Systems., • Demonstrate competency on a wide variety of machines and controls.

Job Description Kamco Supply is a 2nd Generation owned company that started 35 years ago in 1 location in Connecticut. It has grown to 9 branches from Buffalo NY to Cranston RI with a current fleet of 75 trucks of which 35 are boom truck and 3 are 8 story booms and over 500,000sf of warehouse/showroom space. SUMMARY: The job responsibilities for this position include all aspects of the preparation of hollow metal/stainless steel doors and panels including door hardware preps (locks, hinges, strikes, closers, etc.), door lite preparation (cutting opening, kit installation, glazing, etc.), installing reinforcements, custom sizing of doors, and metal work. More specifically, the job activities include interpretation of shop orders, shop drawings and hardware templates to prep door/panel components to specifications. The prepping process includes arc welding, cutting, grinding/polishing, cleaning of metal, touch-up spray painting, cutting and installing glass and packaging. Other activities include: fork lift operation, raw material inventory management and other material handling activities. Maintain 5-S standards and housekeeping of Door Shop area along with tools and workbenches. Also expected to actively support and participate in Continuous Improvements activities by applying Lean Manufacturing tools to daily activities, such as warehouse, inventory management and other material handling activities. ESSENTIAL DUTIES AND RESPONSIBILITIES: Including but not limited to: • Identifying and obtaining pertinent information from shop orders, shop drawings and hardware templates regarding hardware and manufacturing specifications., • Set-up and operation of various bench and hand power tools including bench and hand grinders, cut-off saws, band saw and plasma cutting torch., • Set-up and operation of and arc welding equipment in prepping and modifying metal doors/panels and their components and other light gage sheet metal. Cuts door down in size with power hand saw and cuts preps with other power tools., • Working with variety of materials including: sheet metal, body putty, sanding/grinding and spray painting of metal doors sheet steel and caulks and glass., • Working safely and maintaining consistent quality of work at efficient productivity rates. Safe operation of fork lifts for movement of materials., • Maintain accurate paper work and record keeping for production history and for inventory control., • Accurately pulling and marking doors required for job., • Welds in flat, horizontal and possibly vertical positions. Manually guides electrode or gun along weld line, maintaining length of arc and speed of movement to form specified depth of fusion and bead, as judged from color of metal, sound of weld, and size of molten puddle., • Grinds welds and body putty repairs flush and smooth, with proper feathering of affected area to flat surfaces. Clean and prep doors for prime paint touch-up, if applicable by sanding marks and damage and removing weld spatter and grinding dust., • Effectively communicating with supervisor/lead person, co-workers, office personnel and internal customers. Actively participate in door and process design and improvement activities., • Assisting in other operations, as needed, including warehouse support, special project installations and other production area support. COMPETENCIES: To perform the job successfully, an individual should demonstrate the following: • Analytical: Synthesizes complex or diverse information; Uses intuition and experience to complement data., • Design: Translates concepts and information into images; Uses feedback to modify designs; Demonstrates attention to detail., • Problem Solving: Identifies and resolves problems in a timely manner; Gathers and analyzes information skillfully; Develops alternative solutions; Works well in group problem solving situations; Uses reason even when dealing with emotional topics., • Technical Skills: Strives to continuously build knowledge and skills; Shares expertise with others., • Interpersonal Skills: Focuses on solving conflict, not blaming; Maintains confidentiality; Listens to others without interrupting; Keeps emotions under control; Remains open to others' ideas and tries new things., • Oral Communication: Speaks clearly and persuasively in positive or negative situations; Listens and gets clarification; Responds well to questions; Participates in meetings., • Written Communication: Able to read and interpret written information., • Teamwork: Balances team and individual responsibilities; Exhibits objectivity and openness to others' views; Gives and welcomes feedback; Contributes to building a positive team spirit; Puts success of team above own interests; Able to build morale and group commitments to goals and objectives; Supports everyone's efforts to succeed., • Quality Management: Looks for ways to improve and promote quality; Demonstrates accuracy and thoroughness., • Cost Consciousness: Develops and implements cost saving measures., • Organizational Support: Follows policies and procedures; Completes administrative tasks correctly and on time; Supports organization's goals and values., • Judgement: Displays willingness to make decisions; Exhibits sound and accurate judgment; Supports and explains reasoning for decisions; Includes appropriate people in decision-making process., • Motivation: Demonstrates persistence and overcomes obstacles; Measures self against standard of excellence., • Professionalism: Approaches others in a tactful manner; Reacts well under pressure; Treats others with respect and consideration regardless of their status or position; Accepts responsibility for own actions; Follows through on commitments., • Quality: Demonstrates accuracy and thoroughness; Looks for ways to improve and promote quality; Applies feedback to improve performance; Monitors own work to ensure quality., • Quantity: Meets productivity standards; Completes work in timely manner; Strives to increase productivity; Works quickly., • Safety and Security: Observes safety and security procedures; Determines appropriate action beyond guidelines; Reports potentially unsafe conditions ; Uses equipment and materials properly., • Adaptability: Adapts to changes in the work environment; Changes approach or method to best fit the situation; Able to deal with frequent change, delays, or unexpected events., • Attendance/Punctuality: Is consistently at work and on time., • Dependability: Follows instructions, responds to management direction; Takes responsibility for own actions; Keeps commitments; Commits to long hours of work when necessary to reach goals.; Completes tasks on time or notifies appropriate person with an alternate plan., • Initiative: Looks for and takes advantage of opportunities; Asks for and offers help when needed., • Innovation: Meets challenges with resourcefulness; Generates suggestions for improving work. QUALIFICATIONS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • Education / Experience: High school diploma or general education degree (GED); or one to three months related experience and/or training; or equivalent combination of education and experience., • Language Skills: Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write simple correspondence. Ability to effectively present information in one-on-one and small group situations to other employees of the organization., • Mathematical Skills: Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret bar graphs. Ability to calculate figures and amounts such as area, circumference, and volume. Ability to apply concepts of basic geometry., • Reasoning Ability: Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form., • To perform this job successfully, employee must be willing to:, • Work with minimal supervision., • Work individually and with others., • Participate in problem solving and Lean Activities and identification of unsafe conditions related to job., • Learn and understand basic principles of metal forming., • Perform other activities as requested by supervisor and/or lead person. CERTIFICATES, LICENSES, REGISTRATIONS: Forklift Safe Operation Certificate is required through internal training and certification. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand, walk, bend, use hands to finger, handle, or feel; and reach with hands and arms, perform low level activity and grip up to 35# force. Occasionally sit, lift up to 90# Floor to 36", lift up to 30# Waist to 79" push/pull up to 110# on Hand Truck vertical pull up to 65#, climb/step up 19". Heavier loads are typically handled with OH cranes and other lifting devices. Specific vision abilities required by this job include close vision, depth perception and ability to adjust focus. WORK ENVIRONMENT: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly exposed to moving mechanical parts of machinery and hand power tools and sharp edges on material. The employee is occasionally exposed to risk of electrical shock, risk of radiation (in the electromagnetic fields around the welding equipment), and vibration from hand power tools. The noise level in the work environment is usually very loud. The employee is occasionally exposed to fumes or airborne particles. Employees are required to wear protective clothing, steel toe safety shoes, safety glasses and ear plugs in designated work areas.

Job Description Position:Powder Coat Lead Cannon Industries A global company with headquarters in Rochester, New York, Cannon Industries has grown to become one of the leading sheet metal and custom weld fabricators in the contract manufacturing industry. Our quality standards are unsurpassed in the industry because we know that our customers’ standards grow with each passing year. Computer controlled processes, operators and technicians with decades of experience, and strict procedures for quality control have led Cannon Industries to step ahead of the competition, by earning ISO:9002, ISO:14001, and TS:16949 certifications. Cannon Industries, Inc. is a drug, smoke and alcohol-free working environment. General Job Description: In this position, the Powder Coat Group Leader sets up and operates five stage washer, dryer, bake over and powder coating equipment. Prep work experience is a must. The Powder Coat Supervisor also works closely with the Plant Supervisor and others to accomplish all tasks and goals. Responsible for overseeing the work of all powder coaters and hangers. Minimum Qualifications: • Good verbal and written communication skills, • Have a team player attitude that promotes commitment, reliability and follow through, • Detail oriented with strong organizational skills, • Proven record of strong leadership and motivational skills coupled with sound decision making capabilities, • Ability to resolve problems using logical, systematic and sequential approaches, • Ability to delegate responsibility and to work with others while coaching and developing their capabilities, • Knowledge of OSHA and other environmental requirements in compliance with all federal, state and local laws and regulations, • Ability to read and understand blueprints, • Experience in the utilization of lean manufacturing practices and ISO/TS Quality Systems, • One year of powder coating experience is preferred, • Ability to lift up to 50 lbs regularly Benefits This is a Full Time Salaried position.

Job Description Commercial HVAC Technician & Sheet Metal Worker We are seeking experienced Commercial HVAC Technicians and Sheet Metal Workers to join our team in Rochester, NY. The ideal candidates will specialize in the installation, maintenance, and repair of HVAC systems and sheet metal components for commercial buildings. This position requires expertise in large-scale systems, attention to detail, and a commitment to safety and quality work. Key Responsibilities: • HVAC System Installation & Maintenance: Install, assemble, and repair commercial HVAC systems, including ductwork, air handlers, chillers, boilers, and ventilation systems., • Sheet Metal Fabrication & Installation: Measure, cut, assemble, and install sheet metal ductwork and components according to project specifications., • Blueprint & Code Compliance: Read and interpret blueprints, specifications, and building codes to ensure proper installation and compliance., • Welding & Fabrication: Perform welding, soldering, and cutting of HVAC ductwork and sheet metal using specialized tools and equipment., • Safety Adherence: Maintain a safe working environment and follow OSHA, company, and industry safety protocols. Qualifications: • Minimum of 3 years of experience as an HVAC Technician or Sheet Metal Worker, specifically in commercial construction., • Extensive knowledge of commercial HVAC systems, ductwork fabrication, and hydronic systems., • Ability to read and interpret commercial blueprints and schematics., • Proficiency in using HVAC-specific tools, including duct fabrication equipment, metal cutting tools/ machines, and welding tools., • Physical stamina to lift heavy materials, climb ladders, and work in challenging environments. Total Compensation up to $72.24 per hour including premium benefits. \nCompany Description Great time to get involved with this rapidly growing company! Great time to get involved with this rapidly growing company!

Job DescriptionDescription: Description Weco is a value-added single-source contract manufacturer of machined components, finished fabricated sheet metal, and assembled metal products. Our three facilities encompass all aspects of metal product manufacturing including our own on-site finishing with powder, paint, and graphics capability. We serve the OEM Industrial, Healthcare/Medical Device, Aerospace/Defense, Renewable Energy, and Electronics by manufacturing both conventional and the most technically demanding items. We have been doing just that for companies from Fortune 500 to small and midsize firms since 1952. Benefits: • Competitive salary and benefits package, • Opportunity to work with a team of talented professionals, • Challenging and rewarding work environment, • Generous Paid Time Off, • Several health insurance plan options with a generous employer contribution to the premium, • Long term disability fully paid for by the company, • Enhanced short term disability fully paid for by the company, • Life insurance fully paid for by the company, • Employee Assistance program, • Dental and vision insurance, • 401k plan with company match, • HRA and HSA options for pre-tax savings with an employer funded HRA benefit, • Pet insurance enrollment option The hours for this position are Monday - Thursday 3:00 pm - 1:30 am. Summary: The CNC Machinist is responsible for the safe operation and set up of a wide variety of Computerized Numerical Control Machining Centers (CNC) or other production machines using programs and tooling that have been previously used to manufacture a product and is capable of doing this with little supervision. • Must work with Management to debug and optimize manufacturing processes for jobs or machines which they are responsible., • Must demonstrate a very high level of competency with all types of metal working equipment, both manual and CNC., • Must demonstrate the ability to debug machining processes and communicate those processes for manufacturing., • Must be able to diagnose process problems and determine the cause of the problem., • Must be able to implement corrective action to prevent reoccurrence of problems., • Must be aware of the budget and delivery requirements for work assigned to them and report to management any difficulties that would cause the cost of the work to exceed budget or miss a scheduled delivery., • Must have a thorough understanding of safe operation of metal working equipment, including but not limited to starting and stopping the machining cycle, interrupting the machine cycle, performing offsets to tool length and diameter and restarting the machining cycle., • Must have a thorough knowledge of CNC program code and be able to document and perform edits of the code to enhance machining processes., • Installs machining fixtures and tooling using Tool Sheet and Setup instructions with no supervision., • Orients fixtures and tools to machine coordinate systems, inputs machine, fixture and tool offsets., • Loads appropriate CNC program into machine control., • Loads material into holding fixtures, following verbal and/or written instructions., • Produces “first piece” from setup while observing machining cycle to prevent damage to work piece, tooling, machine or injury to operator., • Must be able to read, understand and interpret blueprints and specifications, including GD&T., • Observes and listens to machine operation to detect malfunctions, such as worn or damaged cutting tools., • Performs a variety of inspection and gaging operations to insure maintenance of quality standards and specifications and have the ability to record the results of these inspections., • Notifies supervisor of discrepancies., • Must be able to train CNC Operators in the safe operation of the machines that they have set up., • Cleans machine, tooling, and parts as instructed., • Performs daily preventative machine maintenance as instructed., • Other duties as assigned. Requirements: Education • High school diploma or general education degree (GED) required., • 5+ years related experience and/or training; or equivalent combination of education and experience required. Skills: • Ability to read and interpret documents such as safety rules, operating and maintenance instructions, procedure manuals, mechanical drawings and specifications., • Ability to write routine reports and correspondence., • Ability to speak effectively before groups of customers or employees., • Ability to add and subtract four-digit numbers and to multiply and divide., • Ability to perform these operations using units of measurement, volume, and distance. Basic understanding of Geometry and Trigonometry., • Ability to apply common sense understanding to carry out complex instructions furnished in written, oral, or diagram form., • Ability to deal with problems involving several variables in situations requiring a high level of judgment and reasoning., • Microsoft Office Suite, • Epicor Vista™ integrated manufacturing and accounting solution, • Adobe Acrobat, • Windows Operating Systems, • Internet Explorer or equivalent, • Must be able to read, understand and interpret mechanical drawings., • Working knowledge of “G” & “M” Codes is required., • Demonstrate a working understanding of CNC Machine Coordinate Systems., • Demonstrate competency on a wide variety of machines and controls.

Job Description CNC MACHINIST - A SHIFT Advantech Industries Inc. is a family-owned manufacturing company based in Rochester, New York, specializing in CNC machining, sheet metal fabrication, welding, and assembly services. The company, founded in 2002, serves multiple industries, including defense, medical, and aerospace, and operates out of a 250,000-square-foot facility. We are currently recruiting CNC Machinists. DUTIES & RESPONSIBILITIES • Sets up machine and observes machine operation to verify accuracy of machine settings and to detect malfunctions or out-of-tolerance machining, using precision measuring instruments such as micrometer and caliper., • Sets up and controls operation of computerized deburring and tooling machine to perform series of machining operations, such as drilling, chamfering, and deburring., • Inspects "first part" and inspects work pieces throughout the production run for out-of-tolerance machining., • Clean machine and work area., • Provide aid and guidance to machine operators with less experience or skill. SKILLS & QUALIFICATIONS • With limited supervision and quality work ethic, functions as a member of a customer-driven quality team whose goal is to ensure that product quality requirements established by the customer have been achieved, • Holds oneself accountable for doing whatever is needed to meet the commitments made around project outcomes, • Maintains adequate levels of performance and motivation despite job tasks that are routine, repetitive, and/or non-stimulating, • Ability to understand and carry out oral and written directives, • Ability to work well under pressure, to adhere to deadlines and the ability to be flexible, • Thorough operational knowledge and skills of specific CNC mills and CNC lathes to be operated with the ability to calculate and set machine controls either manually or by entering commands, • Ability to operate assigned equipment safely and efficiently, • Ability to keep record of time spent and material used, • Ability to use precision measuring tools and equipment, read drawings and blueprints, and be familiar with common machine and measuring tools, including micrometers and calipers, • Ability to add, subtract, multiply and divide in all units of measure, using whole numbers, common fractions and decimals, • A HS Diploma or GED, • 5 years of previous CNC setup and operation experience, • Experience on Mazak or Haas Machines preferred, • Alignment with the requirements and principles of the Advantech Quality Management System and ISO 9001: 2015, • Capacity to handle changes in business operations and adjust to new situations, • Preparedness to stand for extended periods, life heavy items, and operate equipment JOB BENEFITS • Vacation, • Sick Days, • Holidays, • Health Insurance, • Dental Insurance, • Vision Insurance, • Life Insurance, • Voluntary Disability Insurance, • 401(k) Plan with Company Match According to the New York Pay Transparency law, pay range for this job is $23.00 - $37.00 / hour. The actual compensation will be determined based on experience and other factors permitted by law. Advantech Industries Inc. is a Drug-Free Workplace. Employment is contingent upon the successful completion of a pre-employment drug screen. ITAR Restricted: This position is restricted to US Citizens, Permanent Residents or Green Card Holders EOE/AA Race/Color/Sex/Religion/National Origin/Disability/Veteran Advantech Industries Inc. is committed to providing a work environment that is free from unlawful discrimination and harassment in any form and will make reasonable accommodation for qualified individuals with disabilities unless doing so would result in an undue hardship. If you are interested in applying for employment and feel you need a reasonable accommodation pursuant to the ADA, you are encouraged to contact Human Resources. Monday through Friday 7:30 am to 4:00 pm Full time employment

Job Description Advantech Industries Inc. is a family-owned manufacturing company based in Rochester, New York, specializing in CNC machining, sheet metal fabrication, welding, and assembly services. The company, founded in 2002, serves multiple industries, including defense, medical, and aerospace, and operates out of a 250,000-square-foot facility. Advantech Industries Inc. is currently recruiting a Quality Director. DUTIES & RESPONSIBILITIES Duties include, but are not limited to, the following: • Promote and support the requirements and principles of the Company's Quality Management System (QMS) per the AS9100D & ISO9001:2015 standards., • Lead and manage the Quality Department, including Quality Engineers, Quality Technicians, and Quality Inspectors, by overseeing workflow, setting priorities, allocating resources, and holding the team accountable for meeting internal production schedules and customer deadlines., • Plan, schedule, and conduct internal audits of each department to verify compliance with the QMS and identify opportunities for improvement., • Develop, implement, and monitor Corrective and Preventive Actions (CAPAs) and Opportunities for Improvement (OFIs) resulting from internal and external audits, customer feedback, and quality system findings to drive continuous improvement and ensure compliance with the QMS., • Serve as the primary quality representative during daily contract reviews, identifying quality risks, inspection requirements, and gaging needs prior to production., • Partner with Production, Engineering, Scheduling, and other cross-functional teams to align quality resources with production schedules, drive continuous improvement initiatives, and enhance overall product quality and customer satisfaction., • Act as the primary point of contact for customer and supplier quality audits, demonstrating compliance with customer requirements and applicable quality standards., • Manage customer quality relationships by serving as the primary point of contact for quality concerns, surveys, self-assessments, root cause investigations, corrective actions, and ongoing communication to ensure customer quality requirements are consistently met., • Champion a culture of quality throughout the organization by providing training and promoting adherence to the QMS., • Oversee first article, in-process, shop floor, and final inspection activities to ensure compliance with quality standards., • Prepare and review customer data packages and quality documentation prior to shipment, when required., • Monitor quality system performance, analyze quality metrics, and report results and improvement opportunities to executive leadership., • Ensure customer requirements remain a primary focus throughout the organization., • Maintain the integrity of the QMS during organizational, process, or product changes., • Ensure quality processes consistently achieve intended results and support operational excellence. SKILLS & QUALIFICATIONS • With limited supervision and quality work ethic, functions as a lead member of a customer-driven quality team whose goal is to ensure that product quality requirements established by the customer have been achieved., • Holds oneself accountable for doing whatever is needed to meet the commitments made around project outcomes., • Ability to work well under pressure, to adhere to deadlines and the ability to be flexible., • Strong attention to detail., • Strong verbal and written communication skills., • Ability to collaborate effectively with cross-functional teams and build strong working relationships throughout the organization., • Strong analytical, problem-solving, and decision-making skills., • Strong leadership skills with the ability to mentor, develop, and hold team members accountable., • Strong customer focus with the ability to understand, manage, and exceed customer quality expectations., • Formal education or training in a manufacturing or quality related field is required., • 15 years of experience in the field of precision part manufacturing is required., • 15 years of experience managing an AS9100 or ISO9001 quality system is required. JOB BENEFITS • Vacation, • Sick Days, • Holidays, • Health Insurance, • Dental Insurance, • Vision Insurance, • Life Insurance, • Voluntary Disability Insurance, • 401(k) Plan with Company Match According to the New York Pay Transparency law, pay range for this job is $100,000 - $160,000 per year. The actual compensation will be determined based on experience and other factors permitted by law. Advantech Industries Inc. is a Drug-Free Workplace. Employment is contingent upon the successful completion of a pre-employment drug screen. ITAR Restricted: This position is restricted to US Citizens, Permanent Residents or Green Card Holders EOE/AA Race/Color/Sex/Religion/National Origin/Disability/Veteran Advantech Industries Inc. is committed to providing a work environment that is free from unlawful discrimination and harassment in any form and will make reasonable accommodation for qualified individuals with disabilities unless doing so would result in an undue hardship. If you are interested in applying for employment and feel you need a reasonable accommodation pursuant to the ADA, you are encouraged to contact Human Resources.

Job DescriptionPEKO Precision Products: We Make Products That Matter PEKO is a full-service, debt-free, privately-owned contract manufacturer with over 60 years embedded in the Rochester, NY community. In collaboration with our valued business partners, we deliver new product development (NPI) strategies for product commercialization and provide solutions in the medical, industrial, defense, and renewable energy industries. Enriching life is a crucial component of what we do daily. The Opportunity: Mechanical Engineer Your Role: As a Mechanical Engineer, you will support the NPI (New Product Introduction) division in the design and development of cutting-edge technology, new products, processes, and automation for OEMs and startups. This role provides expertise to solve, design, process, and manufacturing challenges using various tools of the trade, including CAD, FEA, and other hands-on activities. Reports To: Engineering Manager Essential Functions: • Using CAD and other tools, ability to generate designs and manufacturing drawings adhering to customer specifications within defined cost, quality and delivery parameters., • Provide concepts and drawings in analog and digital formats., • Provide engineering analysis to support manufacturing, design and process development, • Apply knowledge in mechanical power transmission, fluid power, mechanical components, fabrication and basic automation for design and development., • Work with and support cross-disciplinary teams to solve product design, manufacturing and process problems., • Ability to respond quickly and professionally adhering to delivery requirements., • Participate in customer meetings and travel (<5days/year) as required., • Utilize problem solving and creative thinking skills to develop solutions and implement design options with customers, suppliers and manufacturing, while working collaboratively within a team environment., • Hands on: assembly / testing support to support prototyping and process development Basic Qualifications: • CAD for 3D design and detailing; Solidworks, Inventor and/or CREO skills required., • Experienced in technical communication internally and externally; email, technical write-up, presentation, meetings., • MS Office: Word, Excel and PowerPoint., • Engineering Design: CAD, FEA, FMEA techniques, Analysis (stress, displacement, thermal), DFMA, tolerance analysis and GDT., • Experienced in developing and communicating project progress., • Experience with various manufacturing processes, i.e. machining (CNC, Mill, Lathe), sheet metal, welding, and materials., • Minimum education: BSME – 4 YEAR Mechanical Engineering / Engineering Technology Degree, • 3-5 years Engineering Design or problem solving with commercial or industrial equipment/processes., • 1-2 years minimum CAD design experience in SolidWorks or CREO., • Experience with various manufacturing processes i.e, machining, sheet metal manufacture, plastics processing, costing & finishing in general. Preferred Experience: • Knowledge of industrial control systems and software a plus Work Authorization: US Persons PEKO Perks: • Competitive Compensation, • Tuition Reimbursement (IRS Allowable pre-tax Max), • 401K, Medical, Dental, Vision, • Flexible Spending & Health Savings Accounts, • Life, Short and Long-Term Disability, • Recognition Awards & Discretionary Benefits Our Core Values: Agility We are committed to maintaining a financially prudent and adaptable organization, ready to meet evolving challenges with confidence. Compassion We care deeply for our talented and loyal PEKO family, fostering a supportive and inclusive workplace culture. Endurance We believe in the resilience of our people—problem solvers who shape the future through perseverance and innovation. Integrity We uphold transparency, honesty, and respect in all interactions with employees, customers, and stakeholders. Safety We prioritize a safe, clean, and positive work environment where every team member can thrive. Other: • This position may require you to follow other job-related instructions and to perform other job-related duties as requested or assigned, subject to all applicable state and federal laws. Duties, responsibilities, and activities may change at any time with or without notice., • For more available opportunities at PEKO, please visit our website: Jobs & Career Opportunities | Rochester NY | PEKO Precision Products A reasonable estimate of the compensation range for this position is $75,000-$85,000 per year. The wage range for this role considers a wide range of factors when making compensation decisions including but not limited to skill sets; experience and training; licensure and certifications; and other business and organizational requirements. PEKO Precision Products, Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfers, leaves of absence, compensation and training. Powered by JazzHR Gm7sriQesf

Job DescriptionPEKO is a full-service, debt-free, privately-owned contract manufacturer with over 50 years embedded in the Rochester, NY community. In collaboration with our valued business partners, we deliver new product development (NPI) strategies for product commercialization and provide solutions in the medical, industrial, defense, and renewable energy industries. Enriching life is a crucial component of what we do daily. The Opportunity: Powder Coater Primary Function: The Powder Coater is responsible for preparing and painting various sheet metal products. They will securely hang prepared parts in the spray booth and then operate a powder coating spray gun. Once the item has been sprayed, the Powder Coater will place parts into oven for processing and examine the finished products for compliance. Essential Functions: • Follows work instructions to powder coat sheet metal parts for various customers., • Reviews finished parts, ensuring compliance with customer quality standards., • Assists on other projects as assigned. Reports To: Industrial Paint Manager What We’re Looking For: • Highschool or GED Equivalent, • 1 year powder coating experience preferable, • Attention to detail, • Possess through understanding of all processes in the painting area, • Ability to understand and carry out complicated verbal and written instructionsWork Authorization: US Persons PEKO Perks: • Competitive Compensation, • Tuition Reimbursement (IRS Allowable pre-tax Max), • 401K, Medical, Dental, Vision, • Flexible Spending & Health Savings Accounts, • Life, Short and Long-Term Disability, • Recognition Awards & Discretionary Benefits Our Core Values: • Compassion: We care about our talented and loyal PEKO family., • Safety: We are committed to providing a safe, clean, and positive workplace., • Integrity: We believe in transparency, honesty, and respect for all stakeholders., • Agility: We are dedicated to maintaining an agile and financially prudent organization., • Endurance: We foster the belief that PEKO people are resilient problem-solvers impacting the future., • Get a glimpse of why we are #PEKOProud: #PEKOProud - YouTube Other: • This position may require you to follow other job-related instructions and to perform other job-related duties as requested or assigned, subject to all applicable state and federal laws. Duties, responsibilities, and activities may change at any time with or without notice., • For more available opportunities at PEKO, please visit our website: Jobs & Career Opportunities | Rochester NY | PEKO Precision Products Individual compensation packages are based on a variety of factors unique to the candidate, including skill set, experience, qualifications, and other job-related reasons. A reasonable estimate of the compensation range for this position is $20.00-$24.00 per hour. PEKO Precision Products, Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfers, leaves of absence, compensation and training. Powered by JazzHR pDKwgbrL3T

Job Description Position:Manufacturing/Production Engineer Reports to:Plant Manager Cannon Industries A global company with headquarters in Rochester, New York, Cannon Industries has grown to become one of the leading sheet metal and custom weld fabricators in the contract manufacturing industry. Our quality standards are unsurpassed in the industry because we know that our customers’ standards grow with each passing year. Computer controlled processes, operators and technicians with decades of experience, and strict procedures for quality control have led Cannon Industries to step ahead of the competition, by earning ISO:9002, ISO:14001, and TS:16949 certifications. Cannon Industries, Inc. is a drug, smoke and alcohol-free working environment. General Job Description: Manage engineering and project management effort for the company. This includes scheduling and completing engineering tasks on time and within budget. Administer Engineering document control. Supervise, mentor and train subordinates. Communicate with customers and production to ensure conforming product. Plan and allocate jobs. Resolve conflicts to meet deadlines. Minimum Qualifications: • Excellent verbal and written communication skills, • Have a team player attitude that promotes commitment, reliability and follow through, • Detail oriented with strong organizational skills, • Proven record of strong leadership and motivational skills coupled with sound decision making capabilities, • Ability to resolve problems using logical, systematic and sequential approaches, • Good computer skills with a proficiency in Microsoft Word and Excel, • Strong knowledge of best practices, methods and techniques pertaining to building, facilities and equipment maintenance and repair, • A minimum of five years relevant experience, • Degree in Mechanical Engineering or another related field required Supervisory Specific Duties: • Voice all concerns while working with production staff, Quality Assurance, Engineering and Operations any and all current or potential problems affecting production., • Review all new project release packages to verify that customers’ specifications are achievable., • Participate in new product launch meetings, • Assist Quality Assurance with establishing inspection documents and procedures., • Recommend continuous improvement actions for improving work processes. Departmental Specific Duties: • Quoting/Cost Estimating including; developing a Bill of Materials (BOM) for purchasing to facilitate pricing inquiries, calculating material usages, etc., • Review all new project release packages to verify that customer’s specifications are achievable. Participate in new-product-launch meetings, • Responsible for developing the manufacturing process for all parts. Assist operators with questions and provide technical advice., • Work with Production to improve efficiency on new and existing jobs, • Drive process improvements to generate cost reduction ideas., • Monitor actual job cost vs quoted job cost, • Help write the process sheets (travelers) for each job, • Analyze and improve processes for time/cost efficiencies, • Establish and maintain “machine utilization status”, • Help to create new travelers and/or modify existing travelers as per post program evaluation meetings, • Design machining, welding, inspection and assembly fixtures, • Help provide technical direction to operators as needed, • Supervise tools, fixtures, etc. if need, • Maintain engineering drawing and program files, • Must collaborate with customers to achieve desired results, • Provide engineering support to meet production schedules This list of duties and responsibilities is not intended to be all-inclusive and may be expanded to include other duties and responsibilities as it may be deemed necessary. Benefits • 401 (k), • Health Insurance, • Paid time off, • Vision Insurance, • Dental Insurance, • Life Insurance

Job Description CNC OPERATOR Advantech Industries Inc. is a family-owned manufacturing company based in Rochester, New York, specializing in CNC machining, sheet metal fabrication, welding, and assembly services. The company, founded in 2002, serves multiple industries, including defense, medical, and aerospace, and operates out of a 250,000-square-foot facility. Advantech Industries Inc. is currently recruiting CNC Operators. DUTIES & RESPONSIBILITIES The CNC Operator is responsible for the observation of machines to verify the accuracy of the machine settings and to detect malfunctions or out-of-tolerance machining, by using precision measuring instruments such as micrometers and calipers. Additionally, the CNC Operator is responsible for the controlled operation of computerized deburring and tooling machines to perform a variety of machining operations, which include drilling and deburring and the completion of first piece and in-process inspections. Duties include, but are not limited to, the following: • Observes CNC Mill or CNC Lathe machine operation to verify accuracy of machine settings and to detect malfunctions or out-of-tolerance machining, using precision measuring instruments such as micrometer and dial caliper., • Maintain a clean machine and work area., • Controls operation of computerized deburring and tooling machine to perform series of machining operations, such as drilling and deburring., • Inspects “first part” and inspects work pieces throughout the production run, for out-of-tolerance machining. SKILLS & QUALIFICATIONS • With limited supervision and quality work ethic, functions as a member of a customer-driven quality team whose goal is to ensure that product quality requirements established by the customer have been achieved, • Holds oneself accountable for doing whatever is needed to meet the commitments made around project outcomes, • Maintains adequate levels of performance and motivation despite job tasks that are routine, repetitive, and/or non-stimulating, • Ability to understand and carry out oral and written directives, • Ability to work well under pressure, to adhere to deadlines and the ability to be flexible, • Thorough operational knowledge and skills of specific equipment to be operated, • Ability to operate assigned equipment safely and efficiently, • Ability to keep record of time spent and material used, • Ability to use precision measuring tools and equipment, read drawings and blueprints, and be familiar with common machine and measuring tools, including micrometers and calipers, • Ability to add, subtract, multiply and divide in all units of measure, using whole numbers, common fractions and decimals JOB BENEFITS • Vacation, • Sick Days, • Health Insurance, • Dental Insurance, • Vision Insurance, • Life Insurance, • Voluntary Disability Insurance, • 401(k) Plan with Company Match According to the New York Pay Transparency law, pay range for this job is $17.00 - $29.00 / hour. The actual compensation will be determined based on experience and other factors permitted by law. Advantech Industries Inc. is a Drug-Free Workplace. Employment is contingent upon the successful completion of a pre-employment drug screen. ITAR Restricted: This position is restricted to US Citizens, Permanent Residents or Green Card Holders EOE/AA Race/Color/Sex/Religion/National Origin/Disability/Veteran Advantech Industries Inc. is committed to providing a work environment that is free from unlawful discrimination and harassment in any form and will make reasonable accommodation for qualified individuals with disabilities unless doing so would result in an undue hardship. If you are interested in applying for employment and feel you need a reasonable accommodation pursuant to the ADA, you are encouraged to contact Human Resources. Monday through Friday 7:30 am to 4:00 pm Full time employment

Job Description LASER SET-UP OPERATOR Advantech Industries Inc. is a family-owned manufacturing company based in Rochester, New York, specializing in CNC machining, sheet metal fabrication, welding, and assembly services. The company, founded in 2002, serves multiple industries, including defense, medical, and aerospace, and operates out of a 250,000-square-foot facility. Advantech Industries Inc. is currently recruiting a Laser Set Up/Operator. DUTIES & RESPONSIBILITIES The Laser Set Up/Operator is responsible for the set up and observation of lasers to verify the accuracy of the machine settings and to detect the malfunction or out-of-tolerance operation, by using precision measuring instruments such as micrometers and calipers. Additionally, the Laser Set Up/Operator is responsible for the loading, unloading of the laser and manual deburring of parts. Duties include, but are not limited to, the following: • Follow directions to produce required quantity of parts., • Follow all safety rules regarding machine operation and proper guarding., • Responsible for taking care of routine machine maintenance and keeping work area in neat condition., • Debur parts., • Set up job according to specifications or work order., • Move raw material to machines for finishing., • Create release of lasered parts from stock material by shaking., • Move finished parts to the next operation., • Use prints to set up machine for production., • Shear material., • Move material up to 50 pounds., • Assist in the training of new employees. SKILLS & QUALIFICATIONS • With limited supervision and quality work ethic, functions as a member of a customer-driven quality team whose goal is to ensure that product quality requirements established by the customer have been achieved., • Holds oneself accountable for doing whatever is needed to meet the commitments made around project outcomes., • Maintains adequate levels of performance and motivation despite job tasks that are routine, repetitive, and/or non-stimulating., • Ability to understand and carry out oral and written directives., • Ability to work well under pressure, to adhere to deadlines and the ability to be flexible., • Thorough operational knowledge and skills of specific equipment to be operated, including laser equipment., • Ability to operate assigned equipment safely and efficiently., • Ability to keep record of time spent and material used., • Ability to use precision measuring tools, such as calipers., • Ability to read drawings and blueprints and be familiar with common machine tools., • Ability to add, subtract, multiply and divide in all units of measure, using whole numbers, common fractions and decimals. JOB BENEFITS • Vacation, • Sick Days, • Holidays, • Health Insurance, • Dental Insurance, • Vision Insurance, • Life Insurance, • Voluntary Disability Insurance, • 401(k) Plan with Company Match According to the New York Pay Transparency law, pay range for this job is $24.00 - $32.00 / hour. The actual compensation will be determined based on experience and other factors permitted by law. Advantech Industries Inc. is a Drug-Free Workplace. Employment is contingent upon the successful completion of a pre-employment drug screen. ITAR Restricted: This position is restricted to US Citizens, Permanent Residents or Green Card Holders EOE/AA Race/Color/Sex/Religion/National Origin/Disability/Veteran Advantech Industries Inc. is committed to providing a work environment that is free from unlawful discrimination and harassment in any form and will make reasonable accommodation for qualified individuals with disabilities unless doing so would result in an undue hardship. If you are interested in applying for employment and feel you need a reasonable accommodation pursuant to the ADA, you are encouraged to contact Human Resources. Monday through Friday 7:30 am to 4:00 pm Full time employment

Job DescriptionDescription: General Job Summary: This position involves all phases of the laser turret combo operation, including tool building, repair, set-up and operation to complete sheet metal production per work instructions/blueprint specifications. Essential Duties and Responsibilities: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individual with disabilities to perform the essential job functions. • Refers to production control document/blueprint for job specifics., • Builds and repairs tools per job specifications., • Sets up machine to run job., • Installs and removes required tools for job., • Loads sheet metal on machine., • Runs program and observes operation., • May make minor adjustments in the computer program as necessary., • Unloads finished pieces and inspects per specifications of job., • De-burrs and buffs pieces as needed., • Assists with other duties as assigned by supervisor/ manager. Supervisory Responsibilities: None Requirements: Education High school diploma or general education degree (GED) One-year certificate from college or technical school preferred or equivalent combination of education and experience. Experience 2-3 years related experience or training Computer Skills: Ability to use computer for operation purposes as well as understand use of CNC machine controller. Other Requirements: Ability to use calipers and micrometers, hand jacks and grinders. Ability to read blueprints. Knowledge of CNC. Ability to program is a plus. Language Skills: Intermediate Skills: Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers or Associates of organization. Mathematical Skills: Basic Skills: Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Reasoning Ability: Intermediate Skills: Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. Physical Demands: The physical demands described here are representative of those that must be met by an Associate to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job the Associate is regularly required to stand; walk; sit; maneuver through the office and factory; use hands to finger, handle, or feel; reach with hands and arms; grasping and twisting; talk or hear; lift and/or move equipment/product weighing up to 50 pounds. Work with another associate to lift anything greater than 50lbs Work Environment: The work environment characteristics described here are representative of those Associate encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform within the described work environment. While performing the duties of this job the Associate is regularly exposed to extreme heat; extreme cold; wet and/or humid conditions. While performing the duties of this job the noise level in the work environment is usually loud.

Job Description ESTIMATOR Advantech Industries Inc. is a family-owned manufacturing company based in Rochester, New York, specializing in CNC machining, sheet metal fabrication, welding, and assembly services. The company, founded in 2002, serves multiple industries, including defense, medical, and aerospace, and operates out of a 250,000-square-foot facility. We are seeking an Estimator to develop accurate cost estimates and production timelines for CNC machining projects to support competitive pricing and profitable project execution. DUTIES & RESPONSIBILITIES Duties include, but are not limited to, the following: • Establish and maintain accurate cycle times for CNC machining operations, including mills and lathes., • Analyze customer requirements, drawings, specifications, and manufacturing processes to develop accurate cost estimates and project timelines., • Generate and analyze cost estimates for production jobs., • Collaborate with engineering, production, purchasing, and sales teams to ensure estimates reflect manufacturing capabilities and requirements., • Collect and track material costs to support accurate pricing and budgeting., • Gather and evaluate finishing costs to ensure complete cost assessments., • Support manufacturing operations by performing Process Engineering functions as needed. SKILLS & QUALIFICATIONS • Functions as a member of a customer-driven quality team, ensuring product quality requirements are met with limited supervision and a strong commitment to quality., • Demonstrates strong communication, teamwork, and interpersonal skills, with the ability to remain diplomatic and work effectively with others., • Takes accountability for meeting project commitments, effectively prioritizing tasks, multitasking, and maintaining flexibility to meet deadlines in a fast-paced environment., • Possesses thorough operational knowledge of assigned equipment and the ability to operate it safely and efficiently., • Accurately tracks and records time spent and materials used., • High school diploma or equivalent required, associate's degree preferred., • Vocational or Trade School a plus but not required., • At least five years' experience in manufacturing or related field required, experience estimating CNC production jobs preferred., • Working knowledge of CNC machining processes, including mills and lathes, with the ability to estimate cycle times and tooling requirements., • Ability to interpret technical drawings, blueprints, and GD&T. JOB BENEFITS • Vacation, • Sick Days, • Holidays, • Health Insurance, • Dental Insurance, • Vision Insurance, • Life Insurance, • Voluntary Disability Insurance, • 401(k) Plan with Company Match According to the New York Pay Transparency law, pay range for this job is $90,000 - $125,000 / annual salary. The actual compensation will be determined based on experience and other factors permitted by law. Advantech Industries Inc. is a Drug-Free Workplace. Employment is contingent upon the successful completion of a pre-employment drug screen. ITAR Restricted: This position is restricted to US Citizens, Permanent Residents or Green Card Holders EOE/AA Race/Color/Gender/Sexual Orientation/Gender Identity/Religion/National Origin/Disability/Veteran Advantech Industries Inc. is committed to providing a work environment that is free from unlawful discrimination and harassment in any form and will make reasonable accommodation for qualified individuals with disabilities unless doing so would result in an undue hardship. If you are interested in applying for employment and feel you need a reasonable accommodation pursuant to the ADA, you are encouraged to contact Human Resources.

Job Description PROCESS ENGINEER Advantech Industries Inc. is a family-owned manufacturing company based in Rochester, New York, specializing in CNC machining, sheet metal fabrication, welding, and assembly services. The company, founded in 2002, serves multiple industries, including defense, medical, and aerospace, and operates out of a 250,000-square-foot facility. Advantech Industries Inc. is currently recruiting a Process Engineer. DUTIES & RESPONSIBILITIES Under the supervision of the Engineering Manager, the Process Engineer is responsible for developing detailed work instructions for each job, ensuring all products are manufactured in strict accordance with customer-supplied designs and specifications. The Process Engineer works to ensure efficient, accurate, and repeatable production processes while supporting overall quality and operational objectives. SKILLS & QUALIFICATIONS This role requires a strong understanding of a wide range of manufacturing operations, including CNC machining (mills and lathes), sheet metal fabrication (press brakes, lasers, and turret punches), welding, and mechanical assembly. • With limited supervision and quality work ethic, functions as a member of a customer-driven quality team whose goal is to ensure that product quality requirements established by the customer have been achieved., • Superior communication skills and ability to develop teamwork among staff., • Must be diplomatic and possess good human interaction skills., • Holds oneself accountable for doing whatever is needed to meet the commitments made around project outcomes., • Ability to multitask using the appropriate level of priority setting., • Maintains adequate levels of performance and motivation despite job tasks that are routine, repetitive, and/or non-stimulating., • Ability to work well under pressure, to adhere to deadlines and the ability to be flexible., • Thorough operational knowledge and skills of specific equipment to be operated., • Ability to operate assigned equipment safely and efficiently., • Ability to keep record of time spent and material used., • Ability to use precision measuring tools and equipment, read drawings and blueprints, and be familiar with common machine tools., • Ability to add, subtract, multiply and divide in all units of measure, using whole numbers, common fractions and decimals., • High School Diploma or equivalent required., • College degree preferred but not required., • 10 years of machining or manufacturing experience required, with at least three years of job processing experience preferred. JOB BENEFITS • Vacation, • Sick Days, • Holidays, • Health Insurance, • Dental Insurance, • Vision Insurance, • Life Insurance, • Voluntary Disability Insurance, • 401(k) Plan with Company Match According to the New York Pay Transparency law, pay range for this job is $70,000 - $92,000 / annual salary. The actual compensation will be determined based on experience and other factors permitted by law. Advantech Industries Inc. is a Drug-Free Workplace. Employment is contingent upon the successful completion of a pre-employment drug screen. ITAR Restricted: This position is restricted to US Citizens, Permanent Residents or Green Card Holders EOE/AA Race/Color/Gender/Sexual Orientation/Gender Identity/Religion/National Origin/Disability/Veteran Advantech Industries Inc. is committed to providing a work environment that is free from unlawful discrimination and harassment in any form and will make reasonable accommodation for qualified individuals with disabilities unless doing so would result in an undue hardship. If you are interested in applying for employment and feel you need a reasonable accommodation pursuant to the ADA, you are encouraged to contact Human Resources.

A global company with headquarters in Rochester, New York, Cannon Industries has grown to become one of the leading sheet metal and custom weld fabricators in the contract manufacturing industry. Our quality standards are unsurpassed in the industry because we know that our customers' standards grow with each passing year. Computer controlled processes, operators and technicians with decades of experience, and strict procedures for quality control have led Cannon Industries to step ahead of the competition, by earning ISO:9002, ISO:14001 and TS:16949 certifications. Cannon Industries, Inc. is a drug, smoke and alcohol-free working environment. Responsible for safely operating a large commercial vehicle to transport goods, ensuring timely deliveries, maintaining vehicle safety, and complying with all Federal and company regulations. Roughly 80% of all deliveries will be in the local Rochester, NY area, while the other 20% will require over-the-road, long distance travel. • Pick-up and drop-off product to all Cannon Industries and Burnett Process facilities, • Assist Material Handlers with lifting, banding and shrink-wrapping parts ready to be transported, • Deliver and pick-up product from outside services, • Deliver and pick-up product from purchasing department, • Check incoming packages or individual items for correct quantity, inspects for damage to outer container and notes any irregularities on carrier's bill of lading, • Maintain log of all parts and product transported throughout the facility, ensuring the quantities are correct and proper quality paperwork is attached where applicable, • Perform maintenance check and fluid levels before start of transport, including fuel, • Work with supervisor to make sure all permits and DOT requirements are up to date, • Keep truck and box van clean and free of debris, both interior and exterior, • Inspect truck and box van for damage prior to start of transport

Job Description Cannon Industries, Inc. A global company with headquarters in Rochester, New York, Cannon Industries has grown to become one of the leading sheet metal and custom weld fabricators in the contract manufacturing industry. Our quality standards are unsurpassed in the industry because we know that our customers’ standards grow with each passing year. Computer controlled processes, operators and technicians with decades of experience, and strict procedures for quality control have led Cannon Industries to step ahead of the competition, by earning QS:9000, ISO:9002, and TS:16949 certifications. Cannon Industries, Inc. is a drug, smoke and alcohol-free working environment. General Job Description: Performs duties of a clerical nature, including close attention to operational details to assure timely processing of shipping paperwork and documentation to meet customer requirements. Updates Plant Manager throughout shift with status and progress against customers schedule requirements. Informs customer service of issues relative to order processing. Minimum Qualifications: • Entry level, high school diploma or equivalent, • Minimum 2-years or more experience in Shipping and Receiving, • Good organizational and multitasking skills, • Excellent clerical skills Specific Job Duties: • Process customer shipping documents in Job Boss including pack list, pick list and BOL (bill of lading), • Ensure all skids & cartons are accurately counted and labeled prior to loading the carrier, • Performs inventory transactions & makes material adjustments (location to location), • Print customer labels for packages, cartons, skids, tubs and returnable containers, • Prepares paperwork for accounting department to process export documentation for international shipments, • Assist in processing receiving paperwork form outside services, • Assist purchasing with receiving paperwork, • Process Fed-Ex and UPS documentation online for overnight and expedited shipments, • Assist with processing/packaging customer expedites, • Assist with packing parts as necessary, • Verifies that all shipping paperwork is accurate and complete before forwarding to customer service and accounting, • Immediately notify Customer Service if product is in jeopardy of not shipping, • Set-up carriers for customer pick-ups when required, • Review all daily shipping requirements from Customer Service This list of duties and responsibilities is not intended to be all-inclusive and may be expanded to include other duties and responsibilities as it may be deemed necessary.

Job Description Cannon Industries A global company with headquarters in Rochester, New York, Cannon Industries has grown to become one of the leading sheet metal and custom weld fabricators in the contract manufacturing industry. Our quality standards are unsurpassed in the industry because we know that our customers’ standards grow with each passing year. Computer controlled processes, operators and technicians with decades of experience, and strict procedures for quality control have led Cannon Industries to step ahead of the competition, by earning QS:9000, ISO:9002, and TS:16949 certifications. Cannon Industries, Inc. is a drug, smoke and alcohol-free working environment. General Job Description: Performs custodial maintenance duties on a daily basis, including dusting, mopping, finishing and buffing floors, vacuuming and shampooing carpets and restocking restrooms. Minimum Qualifications: • Must be able to stand, crouch, bend, stretch, creep and crawl, • Must be able to do occasional heavy lifting (50+ lbs.), • Must be able to grasp with hands, have full range of motion with arms Specific Duties: • Vacuum all carpeted areas, • Empty waste bins from offices and factory, • Water plants, • Add water to humidifiers, • Dust the office area and polish all office furniture, • Clean all plant and office room areas, • Sweep and mop lunchroom, • Use walk behind floor scrubber daily on factory floors, • Sweep, clean, mop restrooms in office and factory, • Clean interior windows off the building, • Periodically clean light fixtures and ventilation ducts, • Maintain inventory of all cleaning supplies, • Empty and dispose of recycled material, • Clean and polish drinking fountains daily, • Sweep, mop and wax all hallway floors, • Shovel snow and salt outside building, including front entrance, employee entrance, sidewalks and walkways, • Keep outside building and fenced perimeter free of paper and trash, • Perform all duties in a professional manner This list of duties and responsibilities is not intended to be all-inclusive and may be expanded to include other duties and responsibilities as it may be deemed necessary. Benefits • 401(k), • Health Insurance, • Paid time off, • Vision Insurance, • Dental Insurance, • Life Insurance

$30 - $100/hourpayautodesk inventorparametric 3d cad modelinggd&t (asme y14.5)design for manufacturability (dfm)technical drawing interpretationassembly-level designreverse engineering (scan-to-cad, point cloud-to-model)manufacturing process knowledge (injection molding, sheet metal, cnc machining, casting)cad model auditingcad automation and scripting (python, ilogic, vba, nx open)documentationwritten and verbal communicationproblem-solvingattention to detailmicro1 is the leading AI data lab for training frontier models and evaluating AI agents. Experts contribute their diverse subject matter knowledge across domains such as finance, healthcare, STEM engineering, and more. micro1 transforms that real-world expertise into high-quality training data, evaluations, and feedback loops that improve how AI systems learn, reason, and perform. Our platform identifies and vets top talent through an AI recruiter, enabling high-quality expert contributions at scale. We aim to enable 1 billion people to do meaningful work by applying their expertise to AI. As our global expert network grows, micro1 is building the human intelligence layer for frontier AI. Role Title: Autodesk Inventor Specialist Role Type: Contractor Location: Remote micro1 is engaging Autodesk Inventor Specialists to contribute to a customer-focused project involving advanced mechanical design. In this role, you'll apply your expertise to help train next-generation AI systems. Your work will shape how models learn, reason, and perform through high-quality, real-world input. No prior experience in AI is required — your domain knowledge is what matters. Scope of Work • Develop fully-parametric 3D CAD models of mechanical parts and assemblies based on detailed written briefs using Autodesk Inventor (or comparable platforms)., • Edit and update existing models to reflect revised requirements, ensuring all changes remain fully parametric and in line with best practices., • Audit and review CAD models for compliance with dimensional, tolerance, and manufacturability criteria, identifying and documenting any gaps or issues., • Create and interpret detailed technical drawings, applying ASME Y14.5 or equivalent GD&T standards., • Ensure robust Design for Manufacturability (DFM) considerations across processes such as injection molding, sheet metal, CNC machining, and casting/forging., • Support AI training initiatives by providing clear documentation and rationale for design decisions, edits, and audits., • Communicate effectively in written and verbal formats, delivering precise feedback and solution-oriented insights to project stakeholders. Preferred Qualifications • Minimum 4 years of hands-on parametric modeling experience for edit-level tasks; 10+ years for complex creation work., • Expertise in Autodesk Inventor, with fluency in similar platforms like FreeCAD, SolidWorks, or Fusion 360 considered highly relevant., • Demonstrated proficiency with GD&T (ASME Y14.5 or equivalent), with practical, real-world application., • Proven DFM experience covering at least two to three manufacturing processes (e.g., injection molding, sheet metal, CNC, casting)., • Experience with reverse engineering workflows, such as scan-to-CAD or point cloud-to-model reconstruction., • Ability to manage assembly-level designs and complex mechanical systems, not just single-part modeling., • Familiarity with CAD automation, scripting (Python, iLogic, VBA, NX Open), or similar tools for enhancing workflow efficiency.

$40 - $100/hourpayautodesk fusion 360parametric cad modelingsolidworksinventorfreecadgd&t (asme y14.5)dfm (design for manufacturability)mechanical assembly modelingmanufacturing process knowledge (injection molding, sheet metal, cnc machining, casting/forging)cad model auditingreverse engineering (scan-to-cad, point cloud conversion)cad automationpythonilogicnx openvbatechnical documentationdesign rationale communicationattention to detailproblem-solvingclear written and verbal communicationmicro1 is the leading AI data lab for training frontier models and evaluating AI agents. Experts contribute their diverse subject matter knowledge across domains such as finance, healthcare, STEM engineering, and more. micro1 transforms that real-world expertise into high-quality training data, evaluations, and feedback loops that improve how AI systems learn, reason, and perform. Our platform identifies and vets top talent through an AI recruiter, enabling high-quality expert contributions at scale. We aim to enable 1 billion people to do meaningful work by applying their expertise to AI. As our global expert network grows, micro1 is building the human intelligence layer for frontier AI. Role Title: Autodesk Fusion 360 Specialist Role Type: Contractor Location: Remote micro1 is engaging Autodesk Fusion 360 Specialists to contribute expertise on a high-impact customer project focused on advanced parametric CAD modeling. In this role, you'll apply your expertise to help train next-generation AI systems. Your work will shape how models learn, reason, and perform through high-quality, real-world input. No prior experience in AI is required — your domain knowledge is what matters. Note on Software: We're looking for experts with strong 3D parametric CAD modelling experience — for example, in Autodesk Fusion 360 Specialist. This experience is directly transferable to FreeCAD, which is the software this project will focus on. Prior FreeCAD experience is ideal. Scope of Work • Develop fully parametric 3D models of mechanical parts and assemblies based on detailed written briefs, emphasizing robust sketching, constraints, and feature trees., • Edit and update existing parametric CAD models to reflect evolving requirements, ensuring manufacturability and compliance with specifications., • Audit and review CAD models for dimensional accuracy, tolerance application, and alignment with design intent, calling out any gaps or deviations., • Support AI model training by delivering consistent, high-quality CAD data and clear documentation of design decisions., • Apply deep working knowledge of manufacturing processes—such as injection molding, sheet metal fabrication, CNC machining, and casting/forging—to optimize designs for production., • Communicate design rationale, feedback, and technical insights with clarity—both in writing and verbally—in support of collaboration and continuous project improvement. Preferred Qualifications • Extensive hands-on experience with parametric CAD platforms (ideally FreeCAD, with strong proficiency in Autodesk Fusion 360, SolidWorks, or Inventor acceptable)., • Proven application of GD&T principles (ASME Y14.5 or equivalent) in real-world projects., • Demonstrated DFM expertise across at least 2-3 manufacturing processes relevant to the project scope., • 4+ years of applied experience for model editing tasks; 10+ years for complex model creation assignments., • Proven ability to tackle assembly-level modeling, not just single-part tasks., • Experience in reverse engineering workflows, such as scan-to-CAD or point cloud conversions, is highly valued., • Familiarity with CAD automation or scripting (e.g., Python, iLogic, NX Open, VBA) considered a strong plus for automating and standardizing workflows.

Job Description ASSEMBLER Advantech Industries Inc. is a family-owned manufacturing company based in Rochester, New York, specializing in CNC machining, sheet metal fabrication, welding, and assembly services. The company, founded in 2002, serves multiple industries, including defense, medical, and aerospace, and operates out of a 250,000-square-foot facility. Advantech Industries Inc. is currently recruiting Assemblers. DUTIES & RESPONSIBILITIES Duties include, but are not limited to, the following: • Assembles product according to project specifications., • Visually inspects parts and assembled pieces for defects and touches up paint finish as needed., • Assists Shipping and Receiving with preparing the final product for delivery. SKILLS & QUALIFICATIONS • Ability to use an air gun, air drivers, other hand and power tools and a pallet truck., • Alignment with the requirements and principles of the Advantech Quality Management System and ISO 9001:2015., • Skills to operate assigned equipment safely and efficiently., • Capacity to handle changes in business operations and adjust to new situations., • Preparedness to sit for extended periods and manipulate items with dexterity., • Ability to work with limited supervision., • 1 - 2 years of previous manufacturing experience., • High School Diploma or equivalent required. JOB BENEFITS • Vacation, • Sick Days, • Holidays, • Health Insurance, • Dental Insurance, • Vision Insurance, • Life Insurance, • Voluntary Disability Insurance, • 401(k) Plan with Company Match According to the New York Pay Transparency law, pay range for this job is $18.00 - $27.00 / hour. The actual compensation will be determined based on experience and other factors permitted by law. Advantech Industries Inc. is a Drug-Free Workplace. Employment is contingent upon the successful completion of a pre-employment drug screen. ITAR Restricted: This position is restricted to US Citizens, Permanent Residents or Green Card Holders EOE/AA Race/Color/Sex/Religion/National Origin/Disability/Veteran Advantech Industries Inc. is committed to providing a work environment that is free from unlawful discrimination and harassment in any form and will make reasonable accommodation for qualified individuals with disabilities unless doing so would result in an undue hardship. If you are interested in applying for employment and feel you need a reasonable accommodation pursuant to the ADA, you are encouraged to contact Human Resources. Monday through Friday 7:30 am to 4:00 pm Full time employment

L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers' mission and quest for professional growth. L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do.\n \n \nL3Harris is the Trusted Disruptor in defense tech. With customers' mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security.\n \n Job Title: Tool Maker B \n \n Job Code: 39876 \n \n Job Location: Rochester, NY \n \n Job Schedule: 9/80 (Every other Friday off) \n \n Job Description: \n \n \nThe Assembly & Integration Focus Factory of L3Harris Space and Mission Systems located in Rochester, New York, is looking for an experienced Tool Maker to join the Composite Structures team. Candidate must possess a machining and fabrication background and ability to work within tight tolerance specifications. Scope is focused on the timely execution of assigned tasks as an individual contributor and function well within a team environment. This role involves working directly with engineers on the design, development and fabrication of new and existing products to optimize design for manufacturability. \n \n Essential Functions: \n \n \n• Read engineering drawings/blueprints/schematics and detailed work instructions \n \n • Maintain accurate records and manufacturing documentation \n \n • Must be mechanically inclined with ability to work with very fragile and precise assemblies \n \n • Speak clearly and concisely and present ideas effectively to individuals or groups \n \n • Identify problems and suggest solutions \n \n • Understand and adhere to established policies, procedures, and proper labor charging practices \n \n • Perform as an individual contributor as well as within a team environment \n \n • Demonstrate appropriate computer knowledge \n \n • Proficiently operating mills, surface grinder, and lathe \n \n • Ability to obtain a U.S. Government Security Clearance \n \n Qualifications: \n \n \n• High School Diploma or equivalent and a minimum of 4 years prior relevant experience; Or, 2 years post-Secondary/Associates Degree with 2 to 4 years of prior related experience \n \n Preferred Additional Skills: \n \n \n• Willingness to work overtime, shift work, weekends, holidays, and some travel \n \n • Skilled Journeyman's Certification \n \n • Experience with G-Code and G-Code Macro's for machine programming \n \n • Experience with CNC programming utilizing Mastercam \n \n • Experience with Prototrak programming and operation \n \n • Experience working with composite materials \n \n • Experience working in a mechanical fabrication discipline \n \n • Experience with MIG/TIG welding \n \n • Experience with sheet metal fabrication \n \n \nIn compliance with pay transparency requirements, the salary range for this role in New York state is $55,000-$102,000. This is not a guarantee of compensation or salary, as final offer amount may vary based on factors including but not limited to experience and geographic location. L3Harris also offers a variety of benefits, including health and disability insurance, 401(k) match, flexible spending accounts, EAP, education assistance, parental leave, paid time off, and company-paid holidays. The specific programs and options available to an employee may vary depending on date of hire, schedule type, and the applicability of collective bargaining agreements. \n \n \n#LI-CG1 \n \n \nL3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law.\n \n \nPlease be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information. \n \n \nBy submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions.\n \n \nL3Harris Technologies is an E-Verify Employer. Please click here for the E-Verify Poster in English or Spanish . For information regarding your Right To Work, please click here for English or Spanish .

Your Role: The welder is responsible for welding various sheet metal parts to both commercial, AWS and ASME standards via customer drawings. The welder will use the following processes GTAW, GMAW-S and GMAW-P on common base metals such as, but not limited to Aluminum, Stainless Steel and Cold Rolled

Your Role: The welder is responsible for welding various sheet metal parts to both commercial, AWS and ASME standards via customer drawings. The welder will use the following processes GTAW, GMAW-S and GMAW-P on common base metals such as, but not limited to Aluminum, Stainless Steel and Cold Rolled

The Opportunity: Quality Inspector. Your Role: The Quality Inspector is responsible for conducting inspections of sheet metal, assemblies, and machined parts.

Your Role: The welder is responsible for welding various sheet metal parts to both commercial, AWS and ASME standards via customer drawings. The welder will use the following processes GTAW, GMAW-S and GMAW-P on common base metals such as, but not limited to Aluminum, Stainless Steel and Cold Rolled

Rochester, NY, United States $ 20.00 - 25.00 (US Dollar) Job Overview: We are seeking a highly motivated and skilled Quality Inspector to join our team! We are looking for individuals that performs final visual and simple mechanical inspection of sheet metal parts and assemblies for quality defects, appearance and finishes from specifications. Key Responsibilities: • Follows all safety process and procedures in accordance with the job and Company policy., • Understands and follows all quality procedures., • May require supervision to help determine the best way to accomplish tasks in a timely and efficient manner., • Interprets written procedures and drawing notes., • Visually inspects piece per written sample procedure., • May inspect and sort during manufacturing process (in-process sorts)., • Performs final inspection before product is shipped., • Assists with other duties as assigned by supervisor/manager. Qualifications: Education High school diploma or general education degree (GED) required or equivalent combination of education and experience. Experience 1-2 years related experience or training. Hours: • Full Time - 40 hours per week, • Monday - Friday Benefits: • Competitive salary and benefits package., • Opportunity to work in a dynamic and innovative environment., • Professional growth and development opportunities., • Collaborative and supportive work culture. Contact Us: • Email: pbanahene@pmbtalent.com, • Call: 585-420-8599 Equal Employment Opportunity: Our client is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or protected veteran status. In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States and to complete the required employment eligibility verification document form upon hire.

Reports to: Maintenance Manager Plumbing and Metal. The Millwright/Metal Fabricator will work in our Maintenance/Metal Shop and report to the Brewing Maintenance Manager.

The Millwright/Metal Fabricator will work in our Maintenance/Metal Shop and report to the Brewing Maintenance Manager. Demonstrate a good understanding of fluid mechanics (hydraulics and pneumatics) and all of the components involved (valves, cylinders, pumps, and compressors). Mechanical power tran

Nesco Resource - - Responsibilities: Weld sheet metal parts using MIG and TIG techniques; Perform grinding, packing, and other finishing tasks; Maintain high quality standards while working at production pace; Operate center lap machines and hand blasters; Follow ISO 9001 quality system procedures.