Sheet metal jobs in New York, New YorkCreate job alerts

Job Description Company Overview: Interstate Air Conditioning & Heating employs a staff of over 75, including service technicians, piping mechanics, sheet metal installers, project managers,estimators, and administrators. Our firm offers a complete rang of Commercial HVAC services throughout New York & New Jersey. Job Summary: This position is responsible for managing an active sheet metal fabrication shop. This position requires someone with managerial experience along with lots of shop experience. Responsibilities and Duties: • Manage between 5 - 10 tin knockers, • Input fittings into plasma and coil line., • Maintain equipment, making repairs and modifications when necessary., • Order Material, • Keep Inventory, • Minimum 10 years of duct fabrication experience., • Minimum 1 year as a shop formen., • Osha Certified. nkTPKBkD14

Job Description Company Overview: Interstate Air Conditioning & Heating employs a staff of over 75, including service technicians, piping mechanics, sheet metal installers, project managers,estimators, and administrators. Our firm offers a complete rang of Commercial HVAC services throughout New York & New Jersey. Job Summary: This position is responsible for diagnosing & repairing HVAC system's ,on time and to the customer’s satisfaction. This position has working conditions that expose you to various weather conditions and require you to work outside normal working hours including evening, weekends, and holidays. This position will be for our New Jersey department. You will not need to travel to New York. Responsibilities and Duties: • Diagnose HVAC Systems, • Repair HVAC Units, • Perform Preventive Maintenance, • Minimum 5 Years Experience, • Clean Driver's License, • EPA Certified, • Competitive Salary, • Incentives, • Excellent Training Programs, • PTO, • Medical eVj83Rjmh7

Job Description Company Overview: Interstate Air Conditioning & Heating employs a staff of over 75, including service technicians, piping mechanics, sheet metal installers, project managers,estimators, and administrators. Our firm offers a complete rang of Commercial HVAC services throughout New York & New Jersey. Job Summary: This position is responsible for diagnosing & repairing HVAC system's ,on time and to the customer’s satisfaction. This position has working conditions that expose you to various weather conditions and require you to work outside normal working hours including evening, weekends, and holidays Responsibilities and Duties: • Diagnose PTAC and WSHP Systems, • Repair PTAC , WSHP , Window Units, • Perform Preventive Maintenance, • Minimum 5 Years Experience, • Clean Driver's License, • EPA Certified, • Competitive Salary, • Incentives, • Excellent Training Programs, • PTO, • Medical oN2s1tGwrn

Job Description The Residential HVAC Installer we are looking for naturally works hard, shows up on time, and doesn't cut corners. They enjoy fixing and building, they take pride in their work, and they remain calm under pressure. If you're passionate about helping others, have a strong work ethic, solves problems no one else can, this HVAC Installer role is for you. Efficient Air Service in Riverdale, NJ is looking for a full-time Residential HVAC Installer! Our next HVAC Installer will benefit from a steady flow of work coming through our system all year long. The driven installer we're looking for doesn't shy away from tough installations-they take the initiative, tackle challenges head-on, and keep the team moving forward. Taking care of clients & clear communication are essential. Our standards are high, but so is the potential for growth and achievement. If you're ready to step up, take charge, and level up your career, apply today. Join a team that refuses to settle for anything less than excellence. We're only looking for top performers-do you think you have what it takes? Apply now! POSITION OVERVIEW: • Highlights: Work with an experienced team that prioritizes its employees and customers., • Job Type: HVAC Installer, • Work Hours: Full-time - Monday through Friday, 7:00 AM to 4:00 PM, • Annual Compensation: $40,000 - $100,000+, • Benefits: Medical, life insurance, a 401K with match, a company vehicle, PTO, year-round work, uniforms, tool allowance, opportunities for advancement, training., • High school diploma or equivalent, • Valid NJ driver's license, • 2+ years in residential HVAC install experience, • EPA certifications (Type II or Universal), • Advanced knowledge of HVAC systems, tools, and troubleshooting strategies, • Excellent communication and customer service skills, • Ability to climb ladders, work in confined spaces, work in various environmental conditions, and lift up to 50 lbs. *Experience in plumbing or sheet metal fabrication is a plus THE HISTORY AND CORE VALUES THAT GUIDE EFFICIENT AIR SERVICE Efficient Air Service, a family-owned business established in 2005 by Albert Balonze, has been built on a foundation of excellence, trust, and commitment to outstanding service. From day one, we've taken pride in delivering honest, high-quality work and have earned the loyalty of repeat customers through integrity and reliability. Our highly trained technicians bring a confident, can-do attitude to every job, ensuring 100% satisfaction with each service we provide. Whether in the field or in the office, we foster a supportive, fast-paced environment where teamwork and positivity thrive. Our employees are at the heart of our company, and we celebrate their individual and collective achievements as the driving force behind our success. As we grow, we remain deeply committed to our core values- upholding excellence in everything we do, maintaining a positive attitude, delivering exceptional service, and building trust with both our employees and customers. These principles continue to guide us, helping us preserve the personal touch of a small business while expanding our reach and impact. TAKE THE NEXT STEP! Take the first step toward an exciting career with Efficient Air Service by completing our 3-minute, mobile-friendly initial application. We're ready to welcome you to a team where your expertise and leadership make a difference every day!

Job Description Roofing Service Technician We are looking for a Roofing Service Technician to join our organization. If you are a person with a strong work ethic, and basic knowledge of construction or roofing who wants to become a commercial roofing professional and join our team. We will provide extensive paid training for you to be able make repairs and/or repair recommendations, perform evaluations and Roofing Preventative Maintenance to low slope roofing systems. You must be professional, presentable, and a good communicator as you will be dealing directly with clients daily. • Excellent earnings - $23.00- $29.00 per hour (Based on your commercial roofing experience)., • Three (3) annual bonus opportunities (safety bonus of up to $1,500.00 per year, individual performance bonus & company bottom-line bonus)., • GREAT BENEFITS- Paid Time Off, Health Insurance, Dental, Vision Care benefits, Free life insurance policy, and 401K plan., • Opportunity to advance, learn, grow, and increase your earning potential., • A military-friendly and veteran-friendly employer.What you'll do:, • Always follow safety on the job and while driving., • Inspect problem roofs, perform roof repair, and preventative maintenance., • Communication: Speaks clearly and persuasively in positive or negative situations; listens and gets clarification; responds well to questions., • Dependability: Completes tasks on time; Follows instructions, responds to management direction., • Drives a company vehicle to clients’ buildings daily.What you'll need:, • Minimum 1 year of relevant roofing or construction experience, or military experience., • Driver's License (REQUIRED)., • 21 years of age or older (REQUIRED to drive company vehicle)., • High school diploma, or equivalent (REQUIRED)., • Ability to travel out of town, for up to 4 weeks at a time, when local work is not available (REQUIRED)., • Ability to work overtime and weekends when required., • Must be able to lift up to 50 pounds at a time on a regular basis throughout the day., • Must be able to frequently ascend/descend ladder from 10 to 40’ in height., • Must be able to remain in a stationary position for an extended period of time., • Constantly works in outdoor weather conditions., • Must be able to work in varied extreme weather conditions (extreme hot and extreme cold weather)., • Load and unload material and equipment and materials from variant heights., • Shovel loose materials such as gravel, sand metal snow, or dirt. Simon Roofing is an Equal Opportunity Employer and does not discriminate against any applicant on race, color, religion, national origin, gender, marital status, age, disability, sexual orientation, military/veteran status, or any other status protected by the Federal or State law or local ordinance. Note: The statements herein are intended to describe the general nature and levels of work performed by employees, but are not a complete list of responsibilities, duties, and skills required of the personnel so classified. Furthermore, they do not establish a contract for employment and are subject to change at the discretion of the employer. FL License Number: CCC048202 I certify the information I have provided in this Employment Application is true and complete to the best of my knowledge. I understand that, if hired, discovery of any false information provided or any relevant information omitted (no matter when discovered) may result in the immediate termination of my employment. I authorize Simon Roofing and Sheet Metal Corp. (the "Company") to make whatever inquiries it deems necessary or appropriate of any person or organization to verify any of the information I have provided in this application and to determine my qualifications and abilities. I hereby release the Company from any and all claims or action or causes of action arising out of the Company's lawful inquiries and/or its determination of my qualifications and abilities. Powered by JazzHR fF2MNvYedy

Job Description Company Overview: Interstate Air Conditioning & Heating employs a staff of over 50, including service technicians, piping mechanics, sheet metal installers, project managers,estimators, and administrators. Our firm offers a complete rang of Commercial HVAC services throughout New York & New Jersey. Job Summary: This position is responsible for Installing HVAC system's , HVAC Sheet Metal Ductwork on time and to the customer’s satisfaction. This position has working conditions that expose you to various weather conditions and require you to work outside normal working hours including evening, weekends, and holidays Responsibilities and Duties: • Drilling, • Installing Hangers, • Hanging Ductwork, • Minimum 1 Year Experience, • Construction Experience, • Osha Certified, • Self-starter with ability to work with little supervision Powered by JazzHR hVZirb4bw0

Job DescriptionBenefits: • 401(k), • Bonus based on performance About Us Lightning Mechanical is a trusted HVAC contractor serving New Jersey and the greater Tri-State area since 2005. We specialize in commercial, industrial, and multi-tenant HVAC services. Our expertise spans repair, maintenance, installation, and custom sheet metal fabrication. We provide factory-trained service, installation, and maintenance for Daikin VRV and Applied systems, along with many other VRF manufacturers setting us apart as a leader in the region. We are positioned for continued growth and are seeking a senior-level Estimator who can play a critical role in driving profitability and ensuring accurate project forecasting. Position Summary The Senior HVAC Estimator will be a key contributor to Lightning Mechanicals growth strategy. This individual will be responsible not only for preparing accurate bids but also for shaping the companys estimating processes, guiding project selection, and contributing to overall business development strategy. This is a high-impact role suited for a seasoned professional with the expertise to influence margins and secure profitable work for a growing company. Responsibilities • Lead the full estimating process for commercial and industrial HVAC projects, from review of specs/drawings to final bid submission., • Develop detailed cost breakdowns including labor, equipment, subcontractors, and materials., • Partner with leadership to evaluate project opportunities, ensuring bids align with strategic growth objectives., • Provide value engineering solutions to keep bids competitive without compromising quality., • Build and maintain strong vendor and subcontractor networks to secure competitive pricing., • Standardize and improve estimating procedures and tools to drive efficiency and consistency., • Support business development by providing pricing insights and participating in client-facing discussions as needed., • Assist with AIA billing and project documentation as required. Qualifications • Minimum 10 years of experience in HVAC estimating, with a proven track record in commercial and industrial projects., • Strong understanding of HVAC systems, equipment, and construction practices., • Familiarity with AIA billing processes (preferred)., • Demonstrated ability to influence project selection and contribute to profitability strategies., • Proficiency in estimating software and Microsoft Office Suite., • Excellent communication and negotiation skills, with the ability to work cross-functionally with leadership, PMs, and clients., • Highly organized, detail-oriented, and comfortable working in a fast-paced environment. Compensation & Benefits • Competitive salary: $110,000 $150,000 per year, commensurate with experience., • Health, dental, and vision insurance options., • 401(k) retirement plan., • Paid time off and holidays., • Career growth opportunities in a company on track for continued expansion.

Job Description Duties: Performs corrective and preventive maintenance on all electrical/HVAC systems such as high voltage switch gear, three phase motor control centers, emergency generators, transformers, distribution system, etc. Read prepare blueprints, circuit diagrams related to electic HVAC, refrigeration, estimate order and install according to code all new eletrical equipment and systems. Achieve working knowledge of pneumatic/electric control system and plumbing associated with HVAC and refrigeration systems. Be familiar with all HVAC, refrigeration, ice machine, etc. Able to perform preventive maintenance on chillers, air handling units, reheat coils, thermostats, air conditioning units, exhaust fan ducts, fan coil units, water coolers, pumps, plumbing and electrical work associated with HVAC. Inspect and measure building to determine air flow requirements. Perform installation/make modifications of ducting, registers, and other sheet metal work. Knoweldge of basic painting and carpentry.

Job Description Company Overview: Interstate Air Conditioning & Heating employs a staff of over 100, including service technicians, piping mechanics, sheet metal installers, project managers,estimators, and administrators. Our firm offers a complete rang of Commercial HVAC services throughout New York & New Jersey. Job Summary: This position is responsible for assisting senior technicians in diagnosing & repairing HVAC system's ,on time and to the customer’s satisfaction. This position has working conditions that expose you to various weather conditions and require you to work outside normal working hours including evening, weekends, and holidays Responsibilities and Duties: • Assist Technicians in Diagnosing HVAC Systems, • Assist Technicians in Repairing HVAC Units, • Perform Preventive Maintenance, • Clean Driver's License, • Competitive Salary, • Incentives, • Excellent Training Programs, • PTO, • Medical, • 401K ANKDqOcLee

Job Description Company Overview: Interstate Air Conditioning & Heating employs a staff of over 75, including service technicians, piping mechanics, sheet metal installers, project managers,estimators, and administrators. Our firm offers a complete rang of Commercial HVAC services throughout New York & New Jersey. Job Summary: This position is responsible for diagnosing & repairing HVAC system's ,on time and to the customer’s satisfaction. This position has working conditions that expose you to various weather conditions and require you to work outside normal working hours including evening, weekends, and holidays Responsibilities and Duties: • Diagnose HVAC Systems, • Repair HVAC Units, • Perform Preventive Maintenance, • Minimum 5 Years Experience, • Clean Driver's License, • EPA Certified, • Competitive Salary, • Incentives, • Excellent Training Programs, • PTO, • Medical oMccAn1LFv

Job DescriptionDescription: Job Responsibilities • Lead and install sheet metal ductwork systems for HVAC projects, ensuring quality and compliance with plans and specifications., • Read and interpret blueprints, layouts, and SMACNA standards for proper duct installation., • Collaborate with technicians, installers, project managers, and contractors to meet project goals., • Support both new construction and retrofit projects., • Work independently while maintaining communication with the superintendent, builder, and management., • Identify and resolve potential issues proactively to keep projects on schedule., • Help coordinate project scheduling and assign appropriate technician and installer support., • Proven experience in sheet metal installation for HVAC systems., • Strong understanding of ductwork systems and layout., • Ability to manage multiple priorities with strong attention to detail., • Demonstrated problem-solving and decision-making skills., • Reliable, proactive, and able to work independently or as part of a team., • Excellent attendance and communication skills., • Knowledge of IECC energy codes and practices., • Familiarity with SMACNA standards and industry best practices. Requirements: Eligibility Requirements • Employment/education will be verified., • Applicants must be currently authorized to work in the United States on a full-time basis., • Encon is a drug free workplace and requires post-offer pre-employment drug testing., • Must have reliable transportation., • This position requires a valid driver’s license., • Eligible to work weekends and nights as needed. Physical Requirements • Able to work in a variety of extreme weather, hot and cold conditions., • Able to work safely in confined spaces such as attics, basements, closets, and crawl spaces., • Able to work safely at elevated heights such as rooftops, ceilings, and ladders., • Able to bend, crawl, stoop, stretch, and reach., • Able to walk on uneven surfaces., • Able to work off a ladder, sometimes at heights., • Able to safely lift 50 pounds. Encon Heating & AC complies with applicable Federal civil rights laws and does not discriminate on the basis of race, color, national origin, age, disability, or sex. Encon Heating & AC does not exclude people or treat them differently because of race, color, national origin, age, disability, or sex. CT LIC # HTG-0386317-S1 Putnam NY LIC# 31097 Westchester NY LIC # WC-33774-H21 MEC # 1093 AA/EOE

Job DescriptionDescription: The job of the Lead HVAC installer involves installing residential and light commercial systems, including light metal fabrication, and duct work installation. The lead installer will report to the HVAC Division Manager and lead a small crew in the installation of condensers, air handlers, furnaces, mini-splits and AIQ products. The ideal candidate will possess leadership ability on the job, have a strong working knowledge of HVAC systems, and be able to work both independently and as part of a team. • Install HVAC equipment as “lead installer” in residential and light commercial settings, • Possess a minimum 5 years’ experience installing or equivalent expertise, • Build and install duct work, including light sheet metal fabrication, • Act as primary liaison between HVAC division manager and install techs/helpers, • Boiler install experience a plus, but not necessary, • Knowledge of Trane and Mitsu equipment a plus but not necessary, • Provide excellent customer service and ensure customer satisfaction, • Attend period, paid training and stay up to date with industry trends and developmentsRequirements:, • High school diploma or equivalent, • Technical school training or apprenticeship in HVAC installation and repair, • Experience in HVAC installation and repair, • Strong mechanical aptitude and problem-solving skills, • Knowledge of HVAC systems and components, • Ability to read and interpret blueprints and schematics, • Excellent communication and customer service skills, • Valid driver's license and reliable transportation, • Ability to lift heavy equipment and work in confined spaces

Job DescriptionWe are looking to fill a full time permanent HVAC Installer Position: We are a Lite Commercial and Residential Contractor. Our installs are high end residential split systems, lite commercial split & package systems, sheetmetal ductwork and Heat pump Systems. We offer top wages and benefits with support for a path to achieve maximum potential. • Experience with residential and light commercial HVAC equipment, furnaces, boiler, water heaters, split systems duct free and roof top units, • Experience with sheet metal ductwork, duct work fittings and accessories, • Experience with piping, cutting, soldering, brazing threading and pipe associated craft, • Ability to install humidification systems and associated accessories, • Familiar with control wiring, thermostats and their installation, • Be able to install and start up installed equipment and adjust to the manufacturers and job specifications, • Be able to troubleshoot, adapt and resolve / repair all issues that arise during installation that would keep the equipment from functioning properly, • Perform required documentation for each installation with a complete startup record, • Must have a customer service attitude, • Must work well within a team environment, • Continuously improve knowledge of general HVAC practices, • Must have a clean valid Drivers LicenseWe offer the following: * Top pay for your dedication, time and knowledge, • Vacation, sick and personal days, • 7 Paid Holidays, • Company clothing and apparel, • Health Benefits, • Retirement Plan (401K Plan), • Profit Sharing Participation, • Bonus and incentive program, • Company outings and events, • 5 years HVAC Installation experienceJob Type: Full-time Benefits: • 401(k), • Dental insurance, • Employee discount, • Health insurance, • Paid time off, • Referral program, • Vision insuranceSchedule:, • 10 hour shift, • 8 hour shiftSupplemental Pay:, • Signing bonusEducation:, • High school or equivalent (Preferred)Experience:, • HVAC: 2 years (Required)License/Certification:, • EPA Universal Certification (Preferred)Work Location: Multiple locations

Job Description We are looking for a Heating Ventilation And Air Conditioning Mechanic to join our team! You will install, service, and repair heating and air conditioning systems. Responsibilities: • Install new heating, ventilation, and air conditioning systems, • Inspect and perform equipment repairs and replacements., • Fabricate sheet metal ductwork in our shop., • Install sheet metal ductwork in the field., • Install refrigerant piping., • Install chilled water piping systems, • Previous experience in HVAC or other related fields., • Familiarity with reading sheet metal shop drawings, • Familiarity with HVAC wiring diagrams, • Ability to handle physical workload, • Strong problem solving and critical thinking skills

Job Description Essential HVAC Installer Duties & Responsibilities The primary function is the installation of new or replacement HVAC systems (furnaces, air conditioners, heat pumps, air handlers, etc.) in residential or commercial settings. * System Installation: Installing heating, cooling, and ventilation equipment according to manufacturer specifications and company requirements. * Ductwork: Fabricating and installing sheet metal and flex duct systems, vents, and air distribution components. * Piping & Wiring: Installing copper refrigerant lines (including brazing and soldering), properly connecting gas lines, and wiring both low and high voltage to the equipment. * Blueprint Reading: Interpreting blueprints, schematics, and technical diagrams to plan system layouts and complete installations correctly. * Performance Testing: Performing system start-ups and testing performance, checking refrigerant levels, airflow, and calibrating thermostats. * Compliance: Ensuring all installations comply with local, state, and federal codes, including proper safety procedures and refrigerant handling regulations. * Customer Interaction: Explaining the system operation and maintenance to the customer and ensuring a high level of satisfaction. * Logistics: Pre-measuring jobs to determine material needs, verifying, loading, and stocking company vehicles with equipment and parts. ✨ Key Skills and Qualifications Required Skills & Qualifications Technical: • Proficiency with hand and power tools, • Strong mechanical aptitude and problem-solving skills, • Physical ability to lift heavy equipment (up to 50-100 lbs), • Comfort working in confined spaces (attics, crawl spaces) and on roofs/ladders, • Valid NJ driver's license, • Must have 4 years of experience, • Excellent customer service and communication skills, • High level of attention to detail and commitment to safety, • Ability to work independently and as part of a team We value our team and are committed to supporting your long-term financial well-being. Following one year of continuous employment with our company, you will become eligible for enhanced benefits.

Job Description Commercial Duct work installation for HVAC systems. Immediate opportunity. Must have own transportation, solid references, and a clean security check. Our work is primarily prevailing wage with some private work. This is a prevailing wage position, with rates from $64 to $92.00 per hour. Pay Seven paid holidays, one week vacation per year. Company DescriptionEACM CORP is a Mechanical Contracting Company, we install complete HVAC Systems . We work mostly with State entities, municipalities, and Government entities.EACM CORP is a Mechanical Contracting Company, we install complete HVAC Systems . We work mostly with State entities, municipalities, and Government entities.

Job Description Company Overview: Interstate Air Conditioning & Heating employs a staff of over 50, including service technicians, piping mechanics, sheet metal installers, project managers, estimators, and administrators. Our firm offers a complete rang of Commercial HVAC services throughout New York & New Jersey. Job Summary: This position is responsible for managing an active refrigerant and mechanical piping crew. This position requires someone with managerial experience along with lots of piping experience. This position has working conditions that expose you to various weather conditions and require you to work outside normal working hours including evening, weekends, and holidays Responsibilities and Duties: • Manage between 5 - 10 pipping installers, • Order Materials, • Keep Inventory, • Running Pipe, • Brazing, • Soldering, • Minimum 5 Year Experience, • Construction Experience, • Osha Certified SdDO9glDaq

Job DescriptionSalary: MISSION: The mission of Marion P. Thomas Charter School is to build culturally rich, transformative educational spaces that cultivate successful, lifelong innovators who use their passions, character, and intellect to better themselves, the greater Newark community, and the world beyond. WHO YOU ARE: Under the supervision of the Director of Facilities, conducts a wide range of routine maintenance and repair activities across various disciplines, including masonry, plastering, carpentry, painting, plumbing, steamfitting, sheet metal work, electrical tasks, glazing, and mechanical maintenance. Additionally, undertakes related duties as needed. Do you have what it takes? • Knowledge and Abilities:, • Knowledge of standard tools, materials, methods, practices, occupational hazards, and safety precautions involved in performing general maintenance and repair work., • Ability to understand, remember, and carry out oral and written directions., • Ability to take safety precautions in performing the work., • Ability to obtain, store, safeguard, distribute, and property use equipment, materials, and supplies. THE ROLE: • Erects simple forms, mixes cement, and aggregates, pours same, and does the finishing work involved in concrete structures., • Patches and repairs brick and concrete structures., • Repairs damaged and plastered walls and ceilings., • Spackles, and paints interior and exterior metal, wood, and masonry surfaces., • Repairs plumbing stoppages and repairs leaks in copper, soil, and iron pipes., • Replaces washers and gaskets, and makes general service repairs., • Does general sheet metal work involved in repairing roofs, drainboards, and rainspouts., • Replaces light bulbs, fuses, wall plates, fixture cords, and switches., • Replaces broken glass and reputties., • Changes lubricants, refuels, and does light maintenance work on equipment and vehicles., • Cleans tools and equipment., • Maintain simple records., • Will be required to learn to utilize various types of electronic and/or manual recording and computerized information systems used by the district., • Performs other duties as assigned., • Term of Employment: Per Diem, • Union: Unaffiliated Are You Ready To Join The Village? Heres what you can expect- • The opportunity to join an experienced, diverse, and mission-driven team that is passionate about educational equity, • Healthcare: Medical, dental, vision, STD, LTD, and Life Insurance policies, • Family Focus: Parental/Family leave so you can care for your loved ones, • Pension: Eligibility for participation in the state pension plan, • Learning & Development: A culture that encourages and promotes professional growth and development, • Bonus We do our best work to succeed together. When goals are reached and if eligible, you'll be rewarded. Next Steps: MPTCS is currently reviewing applications on a rolling basis. Due to the high volume of responses received not every applicant will be contacted. If you meet the qualifications, you will be contacted to move forward in the selection process. Marion P. Thomas Charter School provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

As a family-run, high-tech company with nearly 19,000 employees at 71 locations worldwide, we are looking for forward thinkers with unconventional ideas and drive to join our team. Our company culture, which values collaboration and mutual trust, creates the ideal framework for boldly trying new things and questioning the status quo. Our technologies inspire people to develop and produce things that are currently unimaginable. Whether lasers, machine tools, EUV or electronics - TRUMPF is building technological worlds for future generations. Are you ready for new challenges? Do you thrive when solving problems on your own or as part of a team? Do you enjoy travel, learning about new places, and meeting new people? Are you interested in becoming a skilled mobile service technician? This opportunity reports into our Farmington, CT office and is offered as 100% remote. Your new role: TRUMPF Field Service Engineer * Travel to install, services, troubleshoot and repair TRUMPF CNC fabricating machine tools at customer sites throughout the United States, Canada and Mexico * Provide high-quality technical service to customers to ensure optimal sheet metal machine performance. * Document customer machine information and technical conditions and make improvement suggestions. * Train customers to operate and/or service machines to ensure maximum productivity. * Act as a TRUMPF Service ambassador and work directly with customers during installations and repairs to enable their business success. In return we offer • Competitive salary, • A generous benefits package that includes medical, vision, dental, 401K plans, and parental leave, • Flexible, professional, curious, and bold!, • A hands-on problem solver experienced in electronics, digital circuits, wiring, mechanics, and hydraulics., • Focused on customer service and quality., • Technologically savvy and experienced in software and file management., • At TRUMPF, you can develop your career by working on a wide range of innovative products across many exciting technologies., • You have the opportunity to continuously grow within your existing role and be rewarded for it., • We are an international company, offering employees opportunities in the U.S. and around the globe., • We are a family-owned business with a long-term strategy. We care about all the members of our team. TRUMPF Inc. endeavors to make TRUMPF careers pages accessible to any and all users. If you would like to contact us regarding the accessibility of our website or need assistance in completing the applications process, please contact our HR department at 860.255.6000 or at ___.This contact information is for accommodation requests only and can not be used to inquire about the status of application.

Job Description A Metal Shop in Paterson, NJ is looking for a Sheet Metal Helper experienced on Power Brake, Power Shear and general fabricating, must be able to read a ruler. Please contact (973)881-0480

Press Brake Operator | Pembroke, NH | Global Food Processing Equipment Manufacturer This Jobot Job is hosted by: Andrew Kraig Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $20 - $30 per hour A bit about us: Founded over seven decades ago and based in Pembroke, NH, with other offices and facilities worldwide, we are a global leader in designing and manufacturing industrial food processing and packaging equipment. We build customized production lines (from frying and baking systems to conveyors and inspection technology) that help major food brands produce safe, consistent, and high-quality products efficiently. Why join us? • Competitive Compensation: Excellent hourly pay (DOE), • 401(k), • Comprehensive Benefits: Medical, Dental, Vision, Life Insurance, • Generous PTO, Sick Time, Vacation, Paid Holidays & Your Birthday Off, • Stable Employer: Decades of steady growth with a strong backlog, • Consistent Day Shift: Typical hours 7:00am–3:30pm (shop 5:00am–5:30pm) Job Details Key Responsibilities: • Set up and operate CNC press brake machines to bend, form, or punch metals, • Interpret technical drawings, blueprints, and schematics to complete jobs accurately, • Select and install tooling, adjust machine settings, and ensure precision alignment, • Measure and inspect finished parts using calipers, micrometers, and other tools, • Perform rework or fitting adjustments on pieces that fail inspection, • Handle and move materials safely, occasionally lifting up to 70 lbs, • High School Diploma or GED required, • Minimum 1–2 years of experience operating a press brake or similar CNC machinery, • Strong ability to read and interpret blueprints and technical drawings, • Hands-on experience using measuring tools such as calipers and micrometers, • Physical ability to stand for long periods and lift up to 70 lbs, • Experience in sheet metal, food processing, or sanitary manufacturing industries preferred, • Proven ability to work independently while maintaining quality and accuracy Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

HVAC repair, installation and management companies in the New York & New Jersey Market. They fabricate and assemble sheet metal using machines and hand tools to produce high quality HVAC ductwork.

Interstate Air Conditioning & Heating employs a staff of over 50, including service technicians, piping mechanics, sheet metal installers, project managers, estimators, and administrators.

Req Number 159597 Shift Details: Mondays, 11:30am-8pm and other days as needed for PTO coverage ( 8 hour shifts, the earliest shift starting at 6:30am) Operates Magnetic Resonance Imaging (MRI) equipment, prepares patients for examination, and ensures that proper information has been obtained for the physician to make a diagnosis. Assists in the management of patient flow, data reconstruction and sending images to PACS for physician's diagnosis. * Performs thorough screening of patients prior to procedure. * Ensures no metal objects accompany patient into procedure room. * Checks patient creatinine level and calculates glomerular filtration rate (GFR) to determine if patient can receive IV contrast material. * Reviews and ensures accuracy of screening forms completed by patient, including the IV contrast materials information sheet * Prepares patients for examination. * Explains procedures and sets up equipment to administer the proper procedure in a timely fashion. * Ensures that a consent form for IV contrast materials has been obtained. * Performs MRI procedures to include: abdominal, thoracic, neurological exams, extremities, sub-periosteal implant planning, radiation therapy treatment planning, biopsies etc. * Prepares patient for exam by placing and positioning patient on exam table within the gantry. * Enters patient history data and other pertinent information obtained from a requisition completed by Radiologist to include anatomical area of interest. * Select, determine and ensure appropriate radiofrequency and image coil is used based on the anatomical part being imaged. Ensures proper coil positioning. * Transmits cases to on-call Radiologist through use of Tele-Radiology system. * Administers intravenous (IV) and oral contrast agents as per Radiologist order: * Verifies that there are no contraindications to administration of the IV contrast agent. * Calculates contrast dose based on patient's weight. * Performs venipuncture of the appropriate gauge necessary for examination. * Explains in layman's terms the administration of IV contrast, and completes the IV Contrast Information Sheet with information provided by the patient, family member or health care proxy. * Utilizes appropriate flush technique for existing IV line, if needed and utilizes power injector to administer IV contrast. * Recognizes and assists in the treatment contrast agent reactions and IV extravasations \ * Performs related duties, as required. *ADA Essential Functions * Graduate of an accredited Radiologic Technology program, required. * New York State Department of Health licensure as a Radiologic Technologist with certification in IV contrast administration, required. * American Registry of Radiologic Technologists (ARRT) registration, required. * Magnetic Resonance Imaging R.T.(MR)(ARRT), required within eighteen (18) of entry date into position. * Certified in Basic Life Support (BLS or BCLS), required. * Prior radiology experience, required. Experience in MRI, preferred. Knowledge of MRI equipment and protocols, required *Additional Salary Detail The salary range and/or hourly rate listed is a good faith determination of potential base compensation that may be offered to a successful applicant for this position at the time of this job advertisement and may be modified in the future. When determining a team member's base salary and/or rate, several factors may be considered as applicable (e.g., location, specialty, service line, years of relevant experience, education, credentials, negotiated contracts, budget and internal equity). The salary range for this position is $70.39-$70.39/hour It is Northwell Health's policy to provide equal employment opportunity and treat all applicants and employees equally regardless of their age, race, creed/religion, color, national origin, immigration status or citizenship status, sexual orientation, military or veteran status, sex/gender, gender identity, gender expression, disability, pregnancy, genetic information or genetic predisposition or carrier status, marital or familial status, partnership status, victim of domestic violence, sexual or other reproductive health decisions, or other characteristics protected by applicable law.

Aerotek - - Responsibilities: Install square and spiral duct work for HVAC systems; Perform sheet metal installation and fabrication tasks; Install and configure roof top fans and exhaust systems; Read and interpret blueprints for installation projects; Ensure all installations meet quality standar

Job DescriptionWe are currently hiring for 1st OR 2ND Shift Production Laborers (Grinders) to join our team. The Production Laborers is responsible for assisting with general production needs in accordance with their designated manufacturing areas. Responsibilities Ensure work areas are clean and clear of debris and scrap material, placed in proper receptacles Assists with general production labor needs such as: Grinding or deburring parts Punching cut parts out of sheet metal Placing and organizing punch parts onto pallets Moving material using pallet jack and/or forklift to appropriate work areas Operating the PEM inserter machine Ability to read and interpret technical drawings, including material type and thickness Skilled in identifying burrs and surface imperfections on metal parts Proficient in using and reading calipers and other precision measuring tools Strict adherence to Personal Protective Equipment (PPE) requirements All other duties as assigned Has the obligation to be aware of and comply with environmental, safety policies and regulations and always endures duties of high-quality standards Job Requirements Ability to work effectively with limited to no supervision Experience in warehouse environment preferred Ability to communicate verbally Excellent time management skills Willingness to adapt and work in a fast-paced manufacturing environment Schedule: 7am to 3:30pm Pay: $20-24/hr.

Job DescriptionBenefits: • Union Benefits, • Holiday Pay, • 401(k), • 401(k) matching, • Competitive salary Responsibilities Ensure work areas are clean and clear of debris and scrap material, placed in proper receptacles Assists with general production labor needs such as: Grinding or deburring parts Punching cut parts out of sheet metal Placing and organizing punch parts onto pallets Moving material using pallet jack and/or forklift to appropriate work areas Operating the PEM inserter machine Ability to read and interpret technical drawings, including material type and thickness Skilled in identifying burrs and surface imperfections on metal parts Proficient in using and reading calipers and other precision measuring tools Strict adherence to Personal Protective Equipment (PPE) requirements All other duties as assigned Has the obligation to be aware of and comply with environmental, safety policies and regulations and always endures duties of high-quality standards Job Requirements Ability to work effectively with limited to no supervision Experience in warehouse environment preferred Ability to communicate verbally Excellent time management skills Willingness to adapt and work in a fast-paced manufacturing environment Schedule: 3pm to 12am Pay: $20-24/hr.

Job Description Simon Roofing is a roofing industry leader with over 125 years in business with 66 locations throughout the USA. We specialize in roofing service, restorations and replacements. We are looking for employees with great work-ethic, and drive to join our organization at all levels. At Simon Roofing we offer an established career path that will enable you to advance in compensation, responsibility, status, and authority to the degree that your abilities and desire allow. Who you are: As a Field Analyst/Inspector This career will consist of hands-on technician evaluations to all types of commercial roofing systems throughout your area and the U.S. We offer more than a job; we offer a challenging career that will enable you to advance in compensation, responsibility, status and authority to the degree that your abilities and desire allow while working for an industry leader. What you'll do: • Complete and accurate work-ups that communicate requirements, • Understand and identify problems and challenges to each roofing system inspected, • Complete all reports and records in a timely manner, • Accurate and prompt communication with customer and sales, • Follows all Simon policies, processes, and procedures to both the letter and the spirit, • Team effectiveness- Collaborate with Sales Team, Estimating, Production, and any other departments to ensure customer satisfaction, • Self-development in coordination to coaching and guidance from Sales Manager, • Minimum 3 years commercial roofing experience, and knowledge in commercial roofing systems., • Two years Roof Inspecting experience., • Valid Driver's License., • Degree in Construction Management or work experience equivalent., • Ability to travel throughout the US (approximately 60% of time)., • Ability to train other employees on the evaluation process., • Starting pay between $50,000 and $70,000 (based on experience), • Opportunity to learn, grow, and increase your earning potential., • Three (3) annual bonus opportunities (safety bonus, performance & company bottom-line bonus), • Health Insurance, Dental, Vision Care benefits., • 401K plan., • Free life insurance. Simon Roofing is an Equal Opportunity Employer and does not discriminate against any applicant on race, color, religion, national origin, gender, marital status, age, disability, sexual orientation, military/veteran status, or any other status protected by the Federal or State law or local ordinance. Note: The statements herein are intended to describe the general nature and levels of work performed by employees, but are not a complete list of responsibilities, duties, and skills required of the personnel so classified. Furthermore, they do not establish a contract for employment and are subject to change at the discretion of the employer. FL License Number: CCC048202 I certify the information I have provided in this Employment Application is true and complete to the best of my knowledge. I understand that, if hired, discovery of any false information provided or any relevant information omitted (no matter when discovered) may result in the immediate termination of my employment. I authorize Simon Roofing and Sheet Metal Corp. (the "Company") to make whatever inquiries it deems necessary or appropriate of any person or organization to verify any of the information I have provided in this application and to determine my qualifications and abilities. I hereby release the Company from any and all claims or action or causes of action arising out of the Company's lawful inquiries and/or its determination of my qualifications and abilities. Powered by JazzHR rhptyyH1d9

We are seeking an experienced Sheet Metal Foreman who will lead a crew of 5-10 members on-site, effectively managing and working alongside the team. Experience as a Sheet Metal Foreman.

Job Description Manufacturing Manager (Electro-Mechanical Equipment) We are seeking an experienced Manufacturing Manager (or) a seasoned Supervisor ready to transition to a PM with a background in manufacturing of electro-mechanical machinery, and capital equipment. (We will invest in your training, bringing you up to speed with our products) Responsibilities: • Maintained current production schedule, updated daily to track all aspects of equipment orders as they progress and communicate progress., • Manage six (6) supervisors directly, and fifty (60) indirect reports., • Provide the means to establish realistic production schedules that can be met, and schedules that will allow the Company to be competitive with respect to equipment manufacturing lead-times., • Ensure the accurate and timely entry of Production Department data into the IT system., • Conduct weekly production meetings with all applicable Production Personnel to discuss all aspects of production scheduling., • Ensure the proper handling and disposal of all hazardous materials used in the manufacturing process, • Prepare and conduct timely performance reviews for subordinate employees, • Work closely with the 'Materials Manager', who in turn, works closely with the Purchasing Department., • Assist in developing accurate manufacturing time studies that are necessary to develop realistic production scheduling and equipment manufacturing costs, • Ensure that all departments provide the type of cooperation that is essential for Production to meet commitments., • Conduct production meetings to ensure solid inter-departmental communication and continuity regarding all production-related matters., • Ensure a safe and secure work environment within the manufacturing facility., • Prioritize safety as a core value in all aspects of production., • Foster a culture of safety and accountability to minimize workplace incidents and enhance workforce well-being and productivity., • Ensure that the Production Testing Facilities in both buildings are appropriately equipped and maintained clean and tidy Requirements: • Ability to lead, mentor and coach team members., • Solid track record in overall plant management, • Strong work ethic and a high-energy level, • Prior experience with an ERP or MRP system, • Experience in supervision of the production department of a small to medium-size manufacturer., • Exposure to organizations that have in-house sheet metal, welding & fabrication, machine shops., • Mechanical or Industrial Engineering degree, a plus- NOT required., • Experience organizing production operations with a specialty machinery manufacturer., • Organizational Skills:, • Ensuring smooth manufacturing processes, • Meeting deadlines, • Efficiently utilizing resources, • Problem-Solving:, • Identifying issues, • Analyzing root causes, • Implementing effective solutions, • Communication:, • Facilitating clear communication between departments, • Communicating effectively with the workforce, • Adaptability:, • Adjusting production schedules, • Modifying processes, • Allocating resources to adapt to changing environments., • Attention to Detail:, • Maintaining precise specifications, • Upholding quality standards throughout production, • Safety Focus:, • Creating and maintaining a safe work environment, • Promoting a safety culture among the workforce, • Customer Focus:, • Understanding and meeting customer needs, • Ensuring timely delivery and maintaining quality Qualifications: • Close vision, and color vision ability required, • Safely and effectively lifting, carrying, and moving objects of varying weights, • Bending, stooping, reaching, balancing, standing, and walking for extended periods and maintaining the necessary physical dexterity and coordination, • Working in various environmental conditions, which may include exposure to varying temperatures, and noise levels at times Physical Requirements: • Safely and effectively lift, carry, and move objects of varying weights., • Bending, stooping, kneeling, reaching, climbing, balancing, standing, and walking, for extended periods and maintain the necessary physical dexterity and coordination., • Work in various environmental conditions, which may include exposure to varying temperatures, weather, and noise levels. What we offer: • A dynamic, flexible culture, that promotes collaboration and professional/ personal growth of each team member., • To be a part of a well-established team that values hard work, innovation & knows the value of its people., • Coaching and mentoring, helping team members realize their potential, aiding in defining goals and executing them., • We have an aggressive growth strategy; Making way for ample advancement opportunities to transition into operations and/or direct management., • Competitive base package + bonus plan, • We have continuous training, and are firm believers that a strong, knowledgeable, well-trained staff is the reason we are at the top of our field, having continued success., • Our goal as leaders is to provide value, value to our clients, vendors and more importantly to our team- YOU. Looking forward to getting to know you… We are, and work with clients that are equal opportunity employers and considers all applicants for positions without regard to race, color, religion, gender, sexual orientation, age, national origin, disability, veteran status, or any other protected status.

Job DescriptionWe are currently hiring for 2nd Shift Production Laborers (Grinders) to join our team. The Production Laborers is responsible for assisting with general production needs in accordance with their designated manufacturing areas. Responsibilities Ensure work areas are clean and clear of debris and scrap material, placed in proper receptacles Assists with general production labor needs such as: Grinding or deburring parts Punching cut parts out of sheet metal Placing and organizing punch parts onto pallets Moving material using pallet jack and/or forklift to appropriate work areas Operating the PEM inserter machine Ability to read and interpret technical drawings, including material type and thickness Skilled in identifying burrs and surface imperfections on metal parts Proficient in using and reading calipers and other precision measuring tools Strict adherence to Personal Protective Equipment (PPE) requirements All other duties as assigned Has the obligation to be aware of and comply with environmental, safety policies and regulations and always endures duties of high-quality standards Job Requirements Ability to work effectively with limited to no supervision Experience in warehouse environment preferred Ability to communicate verbally Excellent time management skills Willingness to adapt and work in a fast-paced manufacturing environment Schedule: 3pm to 12am Pay: $20-24/hr.

Job Description Parabit Systems is a full-service engineering, design, integration, and manufacturing company located in the heart of Long Island, just 30 minutes from New York City. Our reach is nationwide, with satellite offices in Miami, Los Angeles, San Francisco, and Chicago. From total security solutions, to self-service kiosks and digital signage, Parabit's mission is to enhance and protect your business. Prerequisites: • 3+ solid years of welding experience, • Ability to weld TIG, • Must have experience working with thin gauge stainless steel, cold-rolled steel, and aluminum, • Self-Motivated with a strong work ethic, • Able to read fabrication drawings, • Able to work with a team as well as stand out on their own, • Work within tight tolerances, • Provide a high-quality product, • Knowledge of sheet metal fabrication, • Welding certification required Benefits: • Medical, • Dental, • Vision, • 401K, • Group Life, • PTO All employment candidates must pass: a NON-DOT Drug screening, Criminal and Credit Background Check and a Driver License Check prior to employment.

Sheet Metal Installation Technician. Lead and install sheet metal ductwork systems for HVAC projects, ensuring quality and compliance with plans and specifications. Proven experience in sheet metal installation for HVAC systems.

Construction Force Services is in need of journeymen commercial carpenters capable of doing metal framing, sheet rock, and ceiling work independently.

Job DescriptionBenefits: • Holiday Pay, • 401(k), • 401(k) matching, • Health insurance, • Paid time off, • Profit sharing Responsibilities Ensure work areas are clean and clear of debris and scrap material, placed in proper receptacles Assists with general production labor needs such as: Grinding or deburring parts Punching cut parts out of sheet metal Placing and organizing punch parts onto pallets Moving material using pallet jack and/or forklift to appropriate work areas Operating the PEM inserter machine Ability to read and interpret technical drawings, including material type and thickness Skilled in identifying burrs and surface imperfections on metal parts Proficient in using and reading calipers and other precision measuring tools Strict adherence to Personal Protective Equipment (PPE) requirements All other duties as assigned Has the obligation to be aware of and comply with environmental, safety policies and regulations and always endures duties of high-quality standards Job Requirements Ability to work effectively with limited to no supervision Experience in warehouse environment preferred Ability to communicate verbally Excellent time management skills Willingness to adapt and work in a fast-paced manufacturing environment Schedule: 7am to 3:30pm Pay: $20-24/hr.

Job Description Raycap, Inc., an industry leader in manufacturing solutions for telecommunications, renewable energy, transportation, defense, and other applications, is seeking Third Shift Laser Cutting Operators for our Kearny, NJ facility. This is a fast-paced role within a sheet metal manufacturing environment. The Laser Operator is responsible for all functions related to daily production output. This position requires the use of computers, CAD programs, basic hand tools, and precision measurement instruments. Third Shift Schedule: Monday–Friday, 11:00 p.m.–7:30 a.m. Includes an additional shift differential Primary Job Responsibilities: • Program, set up, and operate CNC lasers—preferably AMADA systems, • Collaborate with production leads to meet demand and stay on schedule, • Inspect parts to ensure they meet quality standards and are free of defects, • Perform routine maintenance on machinery, • Maintain a clean and safe work area, • Partner with Quality, Environmental, and H&S teams to ensure compliance with all operational and regulatory requirements, • Minimum of 2 years’ experience in laser programming and setup, preferably with AMADA equipment or similar sheet metal CNC systems, • Ability to read and interpret 2D prints, 3D models, and work instructions, • Knowledge of sheet metal processes, nitrogen usage, and feed rates, • Proficiency with basic measurement instruments to verify component accuracy, • Strong verbal communication skills, • Excellent time management, • Ability to lift up to 50 lbs., and to stand, bend, and move frequently throughout the shift, • Experience in sheet metal fabrication, • Understanding of laser machine capabilities and limitations, including cut settings, • Experience with NC coding, including making edits based on job requirements UNION: IBEW Local Union 3 BENEFITS: Please reference the IBEW Local 3 Union Contract for details on all benefits. • Medical/Dental/Vision/HRA/Annuity - 6 months from date of hire, • Vacation Time - will begin effective June 30th, after 6 months of continuous employment, • Sick Time - will begin accruing from day one, • Mandatory Union Dues - $7/week, $28/month, • Mandatory One-Time $182 Union Application Fee Drug-free workplace.

Job Description Raycap, Inc., an industry leader in manufacturing solutions for telecommunications, renewable energy, transportation, defense, and other applications, is currently looking for second shift Press Brake/Machine Operators in our Kearny, NJ facility. This is a fast-paced position in a sheet metal manufacturing environment. Job Summary: The Press Brake operator is responsible for all functions related to daily production output. This position requires the use of computers, CAD programs, basic hand tools, and measurement instruments. Third shift: Monday-Friday, 11:00 p.m. through 7:00 a.m. Primary Job Responsibilities: • Program, set up and operate a CNC Press Brake, preferably Amada, • Communicate with production leads on meeting demands and following schedules, • Inspect production parts for defects and quality standards, • Perform routine maintenance on machinery, • Maintain work area and ensure a clean, safe work environment, • Experience in sheet metal fabrication, • 2 years of minimum experience in programming and setup, • Ability to read and interpret 2D prints, 3D models, and work instructions, • Knowledge of press brake tooling, • Ability to use basic measurement instruments to verify that components meet requirements, • Ability to communicate verbally, • Excellent time management skills, • Ability to Lift up to 50 lbs, Stand and Bend frequently without issue UNION: IBEW Local Union 3 BENEFITS: Please reference the IBEW Local 3 Union Contract for details on all benefits. • Medical/Dental/Vision/HRA/Annuity - 6 months from date of hire, • Vacation Time - will begin effective June 30th, after 6 months of continuous employment, • Sick Time - will begin accruing from day one, • Mandatory Union Dues - $7/week, $28/month, • Mandatory One-Time $182 Union Application Fee, • 12 Paid Holidays Raycap is an Equal Opportunity / Affirmative Action Employer. All qualified applicants receive consideration for employment without regard to age, disability, race, color, national origin, sex, marital status, sexual orientation, religion, creed, veteran or military status, or other protected status. We participate in E-verify for all employment verifications. Drug-free workplace.

Interstate Air Conditioning & Heating employs a staff of over 50, including service technicians, piping mechanics, sheet metal installers, project managers,estimators, and administrators.

Construction Force Services is in need of Journeymen Commercial Carpenters capable of doing metal framing, sheet rock, and ceiling work independently.

Interstate Air Conditioning & Heating employs a staff of over 50, including service technicians, piping mechanics, sheet metal installers, project managers,estimators, and administrators.

Our Metals location based in Long Island City is seeking an Inside Sales Representative. Prior experience with sheet metal fabrication or metal roofing is a plus. Create customer sales orders, remanufacturing paperwork, purchase orders, and other data entry tasks through agility and the Google suite

Job Description Help Power American HVAC Manufacturing You keep production moving—safely, precisely, and on time. At Worthington Enterprises, your work ensures materials arrive where they should, machines are set up correctly, and finished products meet exacting standards. The Challenge Can you read a tape measure, spot a defect, and shift gears quickly? On any given shift you may build arbors to prep equipment, stage parts for a press or paint line, operate a forklift or crane to move product, assist with welding or testing, and verify incoming shipments are accurate and damage-free—all while keeping your area clean and your team informed. Pay & Shifts • Pay: $17–$20 per hour, • 2nd shift: 2:00 PM – 10:30 PM, • 3rd shift: 10:00 PM – 6:30 AM Core Responsibilities, • Execute production activities: assembly, material movement, machine setup (building arbors), press or paint line operation, welding, testing, and quality control., • Move, stage, and transport materials and products using forklifts, cranes, pallet jacks, and banding tools., • Receive, inspect, unload, and store inbound goods; verify counts; report damage or defects., • Inspect finished products; communicate and document nonconforming results., • Keep a clean, organized, and safe work environment; complete general housekeeping., • Partner with teammates and supervisors to achieve daily goals., • Perform other duties as assigned to support safe, efficient, quality operations. Qualifications, • High school diploma or equivalent., • 0–6 months of relevant experience preferred (warehouse/manufacturing/material handling)., • Can operate forklifts, cranes, pallet jacks, and banding tools; required OSHA safety training., • Forklift and crane license., • Physically able to lift up to 50 lbs; stand for long periods; perform repetitive tasks., • Basic math, computer, and tape measure reading skills., • Strong hand–eye coordination and mechanical aptitude are advantageous., • Detail-focused; follow written instructions, production orders, and bills of material., • Effective communication and collaborative mindset., • Unwavering commitment to safety protocols and quality standards. Preferred Proficiencies, • Material Handler Experience, • Machine Safety Inspections, • Manual Machining Skills, • Experience in a Manufacturing Environment Tech You’ll Operate

Job Description Job Summary The Switchboard Engineer I is responsible for Designing Low Voltage Switchboards and Panelboards. This role requires great attention to detail and a self-starting mentality. All products must be designed using applicable safety standards & regulations (National Electrical Code, Underwriters Laboratories, etc.). Primary Job Responsibilities • Design 3D Sheet Metal Parts With Flat Patterns, • Complete 3D Assemblies (150+ Item BOM), • Create Wiring Diagrams Using PLCs, Breaker Accessories, Relays, Contactors, Power Supplies etc., • Create & Understand 2D Front View, One-Line/Single-Line & Layout Drawings Using CAD Software, • Ensure Clear Communication Between Engineering, Manufacturing & Other Key Stakeholders, • Work In A Team Environment to Analyze Requirements From Clients & Develop Design Solutions, • Bachelor’s Degree of Science in Mechanical or Electrical Engineering or Similar, • 2-5 Years Of Work Experience (Electro-Mechanical Industry Preferred), • Proficiency In 2D & 3D CAD Software (AutoDesk Suite preferred), • Proficient With Microsoft Office Products, • Experience With UL891, UL67, UL508A or UL1558, • Experience Reading/Understanding National Electric Code, • Experience Sizing Conductors & OCPDs Raycap, Inc. has decades of experience creating products that protect and support the world’s most valuable assets from power and lightning surges. We focus on 5 Core Values of Customer Focus, Talent, Excellence, Innovation and Integrity, and those values show in everything we do. We also believe it is very important to invest in our employees, and we are proud to offer: • A very competitive benefit package, • Paid Time Off, • 10 company paid holidays, • Tuition Reimbursement, • A generous 401(k) employer contribution Raycap is an Equal Opportunity / Affirmative Action Employer. All qualified applicants receive consideration for employment without regard to age, disability, race, color, national origin, sex, marital status, sexual orientation, religion, creed, veteran or military status, or other protected status. We participate in E-verify for all employment verifications. Drug-free workplace

Job DescriptionHVAC Sheet Metal/ Ductwork - PM This is a full-time role of Project Manager. You will be responsible for overseeing all aspects of sheet metal work in HVAC system installations, from design through to completion. This includes managing the team, coordinating with other trades, ensuring adherence to safety protocols, and meeting budget and timeline requirements. The PM ensures that the sheet metal components of HVAC systems are fabricated, installed, and maintained to the highest standards of quality and efficiency. Qualifications • 5+ years of experience in HVAC sheet metal work, with at least 2-3 years in a supervisory or project management role., • Extensive knowledge of HVAC systems, sheet metal fabrication, and installation techniques., • Excellent organizational and time-management skills., • Prior experience working with HVAC design software, AutoCAD, or similar tools is a plus, • Ability to prioritize and manage multiple projects simultaneously., • Knowledge of SMACNA standards., • Familiarity with HVAC codes, standards (e.g., SMACNA), and regulations., • Speaking Spanish is a plus.

Job Description We are seeking an HVAC Sheetmetal Drafter to become part of our team! Our projects intersect many sectors from Leading Technology Firms/Hotels/Educational Campuses/Bio Labs/Multi-Family Housing/Commercial Industries/Finance Industry/Tenant Fit out and more...Employees gain a wealth of experience through drafting different projects and regularly interact with Design Professionals to gain project approval. Qualifications: • Proficiency in CAD, Navisworks, and other drafting tools, • Strong understanding of mechanical engineering principles and design standards, • Detail-oriented individual with strong analytical and problem-solving abilities, • Self-motivated and driven self-starter with high integrity, • Work with senior draftsmen, estimating team and project management team to understand the scope of work and installation intent to accurately design and produce shop drawings and as-built drawings, • Field Surveying Job Site to confirm dimensions, • Ensure compliance with benchmarks, ceiling heights and tolerances, • Flag conflicts on shop drawings that require architect/engineer review, • Ability to layout equipment and orientation of mechanical equipment as required, • Conduct thorough reviews of mechanical plans and drawings for accuracy, compliance, and feasibility, • Produce accurate shop drawings based on industry standard and norms, • Review and modify designs if mechanical plans presented are not achievableCompany DescriptionFounded in 1992, ALL-CITY METAL, INC., is a leader in both sheet metal HVAC fabrication and installation, as well as the fabrication, manufacturing and installation of Trash Compactors, Trash Chutes, Linen Chutes and chute doors. We are a full service company that designs and manufactures our products onsite in the USA. We offer a variety of products including the above and related specialty items, accessories, hardware and components.Founded in 1992, ALL-CITY METAL, INC., is a leader in both sheet metal HVAC fabrication and installation, as well as the fabrication, manufacturing and installation of Trash Compactors, Trash Chutes, Linen Chutes and chute doors. We are a full service company that designs and manufactures our products onsite in the USA. We offer a variety of products including the above and related specialty items, accessories, hardware and components.

Job Description TopView Sightseeing is a New York City-based company offering a variety of sightseeing bus tours. We own and manage the portfolio of brands, including TopView Sightseeing, Event Cruises NYC, Liberty Cruise, Bike Rental Central Park, and Attraction Pass. TopView Sightseeing serves over 500k customers annually, creating unforgettable experiences for New Yorkers and visitors. Join TopView Sightseeing as a Metal Fabricator in Ridgewood, Queens! About the Role: As a Metal Fabricator, you will play a crucial role in the construction of our new fleet of sightseeing buses. You will utilize your expertise in metal fabrication, including welding and assembly techniques, to contribute to exciting and innovative projects. Responsibilities: • Fabricate, assemble, and install sheet metal products., • Light welding: MIG and stick welding as required., • Operate fabricating machines: Cutting, bending, straightening, and shaping metal., • Perform various metalworking tasks: Riveting, drilling, gluing, grinding, and joint preparation., • Maintain a clean and safe workspace., • 1+ years of experience in metal fabrication, • Experience with aluminum and steel fabrication, • Proficiency in using various power tools, • Ability to lift up to 50 lbs., • Ability to pass a pre-employment drug screen, • MIG welding experience (preferred), • Competitive Pay: $20.00 - $22.00 per hour, • Excellent Benefits: Health, dental, vision insurance, • Union Membership: Join TWU Local 100 after 90 days, • Paid Time Off, • 8-hour shifts: 5:30 AM - 2:30 PM (Monday-Friday) or Tuesday-Saturday TFNj6sevjw

Job Description Position Description A client of AlphaStaffHCM is seeking a motivated and enthusiastic Mechanical Engineer to join our dynamic engineering team. As a Mechanical Engineer, you will play a key role in the design, development, and testing of hardware components for our innovative projects. This position drives the mechanical design of server chassis for quantum photonic systems, the structural platforms that house, support, and stabilize quantum computing hardware ensuring precise integration of electronics, power distribution, cabling, cooling and optical components. This position offers a unique opportunity to be at the forefront of quantum technology, contributing to the advancement of groundbreaking solutions in the rapidly evolving field of quantum computing. If you are passionate about changing the world by empowering revolutionary new quantum technologies, we want to hear from you! Duties and Responsibilities • Closely work with engineering teams to review the product specification and design of chassis mechanical, thermal, system architecture to enable competitive, high quality server chassis products, • Support the development of several platforms based around classical and quantum photonics as a mechanical engineer., • Drive designs from concept to mass production, focusing on functionality, reliability, manufacturability and cosmetic requirements., • Create and publish detailed 3D CAD and 2D drawings for designs including GD&T, material selection and manufacturing methods., • Collaborate with external vendors and manufacturers to support product development, prototyping, and production readiness, • Cross-functional work with internal teams such as hardware, photonics, operations, and product managers to deliver products that meet performance, cost, and schedule requirements., • Participate in the prototyping and assembly of products and proof-of-concept models. Soldering work will be present., • Work closely with senior engineers to implement design changes and enhancements., • Maintain accurate documentation of design changes, test procedures, and project progress., • Prepare reports and presentations for detailed design reviews. Required Skills and Experience • Bachelor of Science (BS) or Master of Science (MS) in Mechanical Engineering, Product Design or related field from an accredited university., • Minimum 3-4 years of full-time experience in the design and correlation of mechanical components including: plastic or metal parts, mechanical assemblies, printed circuit boards or flexes., • Product development and management experience in server chassis mechanical, thermal, and system design, • Experience with server system architecture and server chassis layout optimization, • Experience in developing server product architectures and carrying through to production., • General technical knowledge in multiple manufacturing methods used in consumer products such as 3D printing, urethane casting, injection molding, sheet metal, CNC machining etc., • System integration experience, including electro-opto mechanical components (Optics, lens, Motors, Mirrors, translation stages etc.), heat transfer and product architecture, • Experience with using CAD tools such as Solidworks, NX or Creo, and PDM tools such as Solidworks PDM, Windchill (Solidworks and SolidworksPDM experience is preferred), • Familiar with product development cycles, • Experience working with manufacturing vendors and suppliers, • Ability to work in a startup environment., • Technical knowledge in general materials., • Able to lift weights up to OSHA limit (50 lbs.) when required (occasionally)., • Excellent problem-solving and analytical skills., • Excellent written and verbal communication skills., • Detail-oriented. Preferred Skills and Experience • Prior work on server chassis design or data center server hardware is highly valued, as it demonstrates familiarity with the unique challenges of complex system integration of optical, electrical, and mechanical components., • Experience with designing airflow paths, heat sinks, fans, or liquid cooling loops that keep cutting-edge systems within safe temperatures., • Strong understanding of compliance-driven design requirements, including EMI and ESD. Disclaimers: AlphaStaff, Inc. and the Client are equal employment opportunity employers and do not discriminate against any applicant or employee based on race, color, sex, sexual orientation, gender identity, religion, national origin, age, past or present military service, disability, genetic information, or any other basis protected by applicable federal, state, or local laws.

Job Description We are a premier architectural lighting design and manufacturing company in northern New Jersey seeking a Lighting Applications Product Engineer to join our team. This role is ideal for someone who enjoys working at the intersection of architectural design, product engineering, and real-world manufacturing. You will play a key role in supporting sales by translating architectural requirements conveyed in ceiling plans into functional configurations of our products, providing approval and manufacturing drawings, and helping support the manufacturing process to ensure successful production execution. Key Responsibilities • Extract detailed requirements from architectural drawings in support of sales process., • Collaborate with sales teams to evaluate fixture capabilities that align with project goals, • Design and layout companies commercial lighting fixtures to meet architectural and performance requirements, • Create and/or revise detailed CAD drawing submittals for client approval, • Create drawings and CNC control programs for factory fabrication of lighting fixtures, • Work closely with manufacturing to ensure feasibility, efficiency, and quality, • Troubleshoot and resolve technical issues related to fabrication and installation Qualifications • Bachelor’s degree in Engineering, Industrial Design, or related field (or equivalent experience), • Experience in:, • Lighting industry, OR, • Product design / engineered-to-order manufacturing, • Proficiency in AutoCAD, SolidWorks, or similar CAD software, • Strong understanding of:, • LED lighting systems and components, • Electrical fundamentals (drivers, wiring, controls), • Manufacturing processes (sheet metal, extrusion, assembly), • Ability to interpret architectural drawings and specifications, • Strong communication and problem-solving skills Compensation & Benefits • Salary: $60,000 – $80,000 (based on experience), • Health benefits, • Paid time off, • Opportunity to work on custom, high-impact projects in a growing company Why Join Us • Work on unique, custom-engineered products—not commodity items, • Direct impact on projects from concept through manufacturing, • Collaborative environment with engineering, sales, and production, • Opportunity for growth in a specialized, high-value niche Apply Now If you are a motivated engineer who enjoys solving real-world design challenges and working with both customers and manufacturing teams, we’d like to hear from you.