Sheet metal jobs in Passaic, New JerseyCreate job alerts

Job Description Company Overview: Interstate Air Conditioning & Heating employs a staff of over 75, including service technicians, piping mechanics, sheet metal installers, project managers,estimators, and administrators. Our firm offers a complete rang of Commercial HVAC services throughout New York & New Jersey. Job Summary: This position is responsible for diagnosing & repairing HVAC system's ,on time and to the customer’s satisfaction. This position has working conditions that expose you to various weather conditions and require you to work outside normal working hours including evening, weekends, and holidays. This position will be for our New Jersey department. You will not need to travel to New York. Responsibilities and Duties: • Diagnose HVAC Systems, • Repair HVAC Units, • Perform Preventive Maintenance, • Minimum 5 Years Experience, • Clean Driver's License, • EPA Certified, • Competitive Salary, • Incentives, • Excellent Training Programs, • PTO, • Medical eVj83Rjmh7

Job Description Duties: Performs corrective and preventive maintenance on all electrical/HVAC systems such as high voltage switch gear, three phase motor control centers, emergency generators, transformers, distribution system, etc. Read prepare blueprints, circuit diagrams related to electic HVAC, refrigeration, estimate order and install according to code all new eletrical equipment and systems. Achieve working knowledge of pneumatic/electric control system and plumbing associated with HVAC and refrigeration systems. Be familiar with all HVAC, refrigeration, ice machine, etc. Able to perform preventive maintenance on chillers, air handling units, reheat coils, thermostats, air conditioning units, exhaust fan ducts, fan coil units, water coolers, pumps, plumbing and electrical work associated with HVAC. Inspect and measure building to determine air flow requirements. Perform installation/make modifications of ducting, registers, and other sheet metal work. Knoweldge of basic painting and carpentry.

Job DescriptionDescription: Job Responsibilities • Lead and install sheet metal ductwork systems for HVAC projects, ensuring quality and compliance with plans and specifications., • Read and interpret blueprints, layouts, and SMACNA standards for proper duct installation., • Collaborate with technicians, installers, project managers, and contractors to meet project goals., • Support both new construction and retrofit projects., • Work independently while maintaining communication with the superintendent, builder, and management., • Identify and resolve potential issues proactively to keep projects on schedule., • Help coordinate project scheduling and assign appropriate technician and installer support., • Proven experience in sheet metal installation for HVAC systems., • Strong understanding of ductwork systems and layout., • Ability to manage multiple priorities with strong attention to detail., • Demonstrated problem-solving and decision-making skills., • Reliable, proactive, and able to work independently or as part of a team., • Excellent attendance and communication skills., • Knowledge of IECC energy codes and practices., • Familiarity with SMACNA standards and industry best practices. Requirements: Eligibility Requirements • Employment/education will be verified., • Applicants must be currently authorized to work in the United States on a full-time basis., • Encon is a drug free workplace and requires post-offer pre-employment drug testing., • Must have reliable transportation., • This position requires a valid driver’s license., • Eligible to work weekends and nights as needed. Physical Requirements • Able to work in a variety of extreme weather, hot and cold conditions., • Able to work safely in confined spaces such as attics, basements, closets, and crawl spaces., • Able to work safely at elevated heights such as rooftops, ceilings, and ladders., • Able to bend, crawl, stoop, stretch, and reach., • Able to walk on uneven surfaces., • Able to work off a ladder, sometimes at heights., • Able to safely lift 50 pounds. Encon Heating & AC complies with applicable Federal civil rights laws and does not discriminate on the basis of race, color, national origin, age, disability, or sex. Encon Heating & AC does not exclude people or treat them differently because of race, color, national origin, age, disability, or sex. CT LIC # HTG-0386317-S1 Putnam NY LIC# 31097 Westchester NY LIC # WC-33774-H21 MEC # 1093 AA/EOE

Job Description Essential HVAC Installer Duties & Responsibilities The primary function is the installation of new or replacement HVAC systems (furnaces, air conditioners, heat pumps, air handlers, etc.) in residential or commercial settings. * System Installation: Installing heating, cooling, and ventilation equipment according to manufacturer specifications and company requirements. * Ductwork: Fabricating and installing sheet metal and flex duct systems, vents, and air distribution components. * Piping & Wiring: Installing copper refrigerant lines (including brazing and soldering), properly connecting gas lines, and wiring both low and high voltage to the equipment. * Blueprint Reading: Interpreting blueprints, schematics, and technical diagrams to plan system layouts and complete installations correctly. * Performance Testing: Performing system start-ups and testing performance, checking refrigerant levels, airflow, and calibrating thermostats. * Compliance: Ensuring all installations comply with local, state, and federal codes, including proper safety procedures and refrigerant handling regulations. * Customer Interaction: Explaining the system operation and maintenance to the customer and ensuring a high level of satisfaction. * Logistics: Pre-measuring jobs to determine material needs, verifying, loading, and stocking company vehicles with equipment and parts. ✨ Key Skills and Qualifications Required Skills & Qualifications Technical: • Proficiency with hand and power tools, • Strong mechanical aptitude and problem-solving skills, • Physical ability to lift heavy equipment (up to 50-100 lbs), • Comfort working in confined spaces (attics, crawl spaces) and on roofs/ladders, • Valid NJ driver's license, • Must have 4 years of experience, • Excellent customer service and communication skills, • High level of attention to detail and commitment to safety, • Ability to work independently and as part of a team We value our team and are committed to supporting your long-term financial well-being. Following one year of continuous employment with our company, you will become eligible for enhanced benefits.

Job DescriptionSalary: MISSION: The mission of Marion P. Thomas Charter School is to build culturally rich, transformative educational spaces that cultivate successful, lifelong innovators who use their passions, character, and intellect to better themselves, the greater Newark community, and the world beyond. WHO YOU ARE: Under the supervision of the Director of Facilities, conducts a wide range of routine maintenance and repair activities across various disciplines, including masonry, plastering, carpentry, painting, plumbing, steamfitting, sheet metal work, electrical tasks, glazing, and mechanical maintenance. Additionally, undertakes related duties as needed. Do you have what it takes? • Knowledge and Abilities:, • Knowledge of standard tools, materials, methods, practices, occupational hazards, and safety precautions involved in performing general maintenance and repair work., • Ability to understand, remember, and carry out oral and written directions., • Ability to take safety precautions in performing the work., • Ability to obtain, store, safeguard, distribute, and property use equipment, materials, and supplies. THE ROLE: • Erects simple forms, mixes cement, and aggregates, pours same, and does the finishing work involved in concrete structures., • Patches and repairs brick and concrete structures., • Repairs damaged and plastered walls and ceilings., • Spackles, and paints interior and exterior metal, wood, and masonry surfaces., • Repairs plumbing stoppages and repairs leaks in copper, soil, and iron pipes., • Replaces washers and gaskets, and makes general service repairs., • Does general sheet metal work involved in repairing roofs, drainboards, and rainspouts., • Replaces light bulbs, fuses, wall plates, fixture cords, and switches., • Replaces broken glass and reputties., • Changes lubricants, refuels, and does light maintenance work on equipment and vehicles., • Cleans tools and equipment., • Maintain simple records., • Will be required to learn to utilize various types of electronic and/or manual recording and computerized information systems used by the district., • Performs other duties as assigned., • Term of Employment: Per Diem, • Union: Unaffiliated Are You Ready To Join The Village? Heres what you can expect- • The opportunity to join an experienced, diverse, and mission-driven team that is passionate about educational equity, • Healthcare: Medical, dental, vision, STD, LTD, and Life Insurance policies, • Family Focus: Parental/Family leave so you can care for your loved ones, • Pension: Eligibility for participation in the state pension plan, • Learning & Development: A culture that encourages and promotes professional growth and development, • Bonus We do our best work to succeed together. When goals are reached and if eligible, you'll be rewarded. Next Steps: MPTCS is currently reviewing applications on a rolling basis. Due to the high volume of responses received not every applicant will be contacted. If you meet the qualifications, you will be contacted to move forward in the selection process. Marion P. Thomas Charter School provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

As a family-run, high-tech company with nearly 19,000 employees at 71 locations worldwide, we are looking for forward thinkers with unconventional ideas and drive to join our team. Our company culture, which values collaboration and mutual trust, creates the ideal framework for boldly trying new things and questioning the status quo. Our technologies inspire people to develop and produce things that are currently unimaginable. Whether lasers, machine tools, EUV or electronics - TRUMPF is building technological worlds for future generations. Are you ready for new challenges? Do you thrive when solving problems on your own or as part of a team? Do you enjoy travel, learning about new places, and meeting new people? Are you interested in becoming a skilled mobile service technician? This opportunity reports into our Farmington, CT office and is offered as 100% remote. Your new role: TRUMPF Field Service Engineer * Travel to install, services, troubleshoot and repair TRUMPF CNC fabricating machine tools at customer sites throughout the United States, Canada and Mexico * Provide high-quality technical service to customers to ensure optimal sheet metal machine performance. * Document customer machine information and technical conditions and make improvement suggestions. * Train customers to operate and/or service machines to ensure maximum productivity. * Act as a TRUMPF Service ambassador and work directly with customers during installations and repairs to enable their business success. In return we offer • Competitive salary, • A generous benefits package that includes medical, vision, dental, 401K plans, and parental leave, • Flexible, professional, curious, and bold!, • A hands-on problem solver experienced in electronics, digital circuits, wiring, mechanics, and hydraulics., • Focused on customer service and quality., • Technologically savvy and experienced in software and file management., • At TRUMPF, you can develop your career by working on a wide range of innovative products across many exciting technologies., • You have the opportunity to continuously grow within your existing role and be rewarded for it., • We are an international company, offering employees opportunities in the U.S. and around the globe., • We are a family-owned business with a long-term strategy. We care about all the members of our team. TRUMPF Inc. endeavors to make TRUMPF careers pages accessible to any and all users. If you would like to contact us regarding the accessibility of our website or need assistance in completing the applications process, please contact our HR department at 860.255.6000 or at ___.This contact information is for accommodation requests only and can not be used to inquire about the status of application.

Job Description A Metal Shop in Paterson, NJ is looking for a Sheet Metal Helper experienced on Power Brake, Power Shear and general fabricating, must be able to read a ruler. Please contact (973)881-0480

HVAC repair, installation and management companies in the New York & New Jersey Market. They fabricate and assemble sheet metal using machines and hand tools to produce high quality HVAC ductwork.

Job Description Simon Roofing is a roofing industry leader with over 125 years in business with 66 locations throughout the USA. We specialize in roofing service, restorations and replacements. We are looking for employees with great work-ethic, and drive to join our organization at all levels. At Simon Roofing we offer an established career path that will enable you to advance in compensation, responsibility, status, and authority to the degree that your abilities and desire allow. Who you are: As a Field Analyst/Inspector This career will consist of hands-on technician evaluations to all types of commercial roofing systems throughout your area and the U.S. We offer more than a job; we offer a challenging career that will enable you to advance in compensation, responsibility, status and authority to the degree that your abilities and desire allow while working for an industry leader. What you'll do: • Complete and accurate work-ups that communicate requirements, • Understand and identify problems and challenges to each roofing system inspected, • Complete all reports and records in a timely manner, • Accurate and prompt communication with customer and sales, • Follows all Simon policies, processes, and procedures to both the letter and the spirit, • Team effectiveness- Collaborate with Sales Team, Estimating, Production, and any other departments to ensure customer satisfaction, • Self-development in coordination to coaching and guidance from Sales Manager, • Minimum 3 years commercial roofing experience, and knowledge in commercial roofing systems., • Two years Roof Inspecting experience., • Valid Driver's License., • Degree in Construction Management or work experience equivalent., • Ability to travel throughout the US (approximately 60% of time)., • Ability to train other employees on the evaluation process., • Starting pay between $50,000 and $70,000 (based on experience), • Opportunity to learn, grow, and increase your earning potential., • Three (3) annual bonus opportunities (safety bonus, performance & company bottom-line bonus), • Health Insurance, Dental, Vision Care benefits., • 401K plan., • Free life insurance. Simon Roofing is an Equal Opportunity Employer and does not discriminate against any applicant on race, color, religion, national origin, gender, marital status, age, disability, sexual orientation, military/veteran status, or any other status protected by the Federal or State law or local ordinance. Note: The statements herein are intended to describe the general nature and levels of work performed by employees, but are not a complete list of responsibilities, duties, and skills required of the personnel so classified. Furthermore, they do not establish a contract for employment and are subject to change at the discretion of the employer. FL License Number: CCC048202 I certify the information I have provided in this Employment Application is true and complete to the best of my knowledge. I understand that, if hired, discovery of any false information provided or any relevant information omitted (no matter when discovered) may result in the immediate termination of my employment. I authorize Simon Roofing and Sheet Metal Corp. (the "Company") to make whatever inquiries it deems necessary or appropriate of any person or organization to verify any of the information I have provided in this application and to determine my qualifications and abilities. I hereby release the Company from any and all claims or action or causes of action arising out of the Company's lawful inquiries and/or its determination of my qualifications and abilities. Powered by JazzHR rhptyyH1d9

Job DescriptionBenefits: • Union Benefits, • Holiday Pay, • 401(k), • 401(k) matching, • Competitive salary Responsibilities Ensure work areas are clean and clear of debris and scrap material, placed in proper receptacles Assists with general production labor needs such as: Grinding or deburring parts Punching cut parts out of sheet metal Placing and organizing punch parts onto pallets Moving material using pallet jack and/or forklift to appropriate work areas Operating the PEM inserter machine Ability to read and interpret technical drawings, including material type and thickness Skilled in identifying burrs and surface imperfections on metal parts Proficient in using and reading calipers and other precision measuring tools Strict adherence to Personal Protective Equipment (PPE) requirements All other duties as assigned Has the obligation to be aware of and comply with environmental, safety policies and regulations and always endures duties of high-quality standards Job Requirements Ability to work effectively with limited to no supervision Experience in warehouse environment preferred Ability to communicate verbally Excellent time management skills Willingness to adapt and work in a fast-paced manufacturing environment Schedule: 3pm to 12am Pay: $20-24/hr.

Job DescriptionWe are currently hiring for 1st OR 2ND Shift Production Laborers (Grinders) to join our team. The Production Laborers is responsible for assisting with general production needs in accordance with their designated manufacturing areas. Responsibilities Ensure work areas are clean and clear of debris and scrap material, placed in proper receptacles Assists with general production labor needs such as: Grinding or deburring parts Punching cut parts out of sheet metal Placing and organizing punch parts onto pallets Moving material using pallet jack and/or forklift to appropriate work areas Operating the PEM inserter machine Ability to read and interpret technical drawings, including material type and thickness Skilled in identifying burrs and surface imperfections on metal parts Proficient in using and reading calipers and other precision measuring tools Strict adherence to Personal Protective Equipment (PPE) requirements All other duties as assigned Has the obligation to be aware of and comply with environmental, safety policies and regulations and always endures duties of high-quality standards Job Requirements Ability to work effectively with limited to no supervision Experience in warehouse environment preferred Ability to communicate verbally Excellent time management skills Willingness to adapt and work in a fast-paced manufacturing environment Schedule: 7am to 3:30pm Pay: $20-24/hr.

Job Description Manufacturing Manager (Electro-Mechanical Equipment) We are seeking an experienced Manufacturing Manager (or) a seasoned Supervisor ready to transition to a PM with a background in manufacturing of electro-mechanical machinery, and capital equipment. (We will invest in your training, bringing you up to speed with our products) Responsibilities: • Maintained current production schedule, updated daily to track all aspects of equipment orders as they progress and communicate progress., • Manage six (6) supervisors directly, and fifty (60) indirect reports., • Provide the means to establish realistic production schedules that can be met, and schedules that will allow the Company to be competitive with respect to equipment manufacturing lead-times., • Ensure the accurate and timely entry of Production Department data into the IT system., • Conduct weekly production meetings with all applicable Production Personnel to discuss all aspects of production scheduling., • Ensure the proper handling and disposal of all hazardous materials used in the manufacturing process, • Prepare and conduct timely performance reviews for subordinate employees, • Work closely with the 'Materials Manager', who in turn, works closely with the Purchasing Department., • Assist in developing accurate manufacturing time studies that are necessary to develop realistic production scheduling and equipment manufacturing costs, • Ensure that all departments provide the type of cooperation that is essential for Production to meet commitments., • Conduct production meetings to ensure solid inter-departmental communication and continuity regarding all production-related matters., • Ensure a safe and secure work environment within the manufacturing facility., • Prioritize safety as a core value in all aspects of production., • Foster a culture of safety and accountability to minimize workplace incidents and enhance workforce well-being and productivity., • Ensure that the Production Testing Facilities in both buildings are appropriately equipped and maintained clean and tidy Requirements: • Ability to lead, mentor and coach team members., • Solid track record in overall plant management, • Strong work ethic and a high-energy level, • Prior experience with an ERP or MRP system, • Experience in supervision of the production department of a small to medium-size manufacturer., • Exposure to organizations that have in-house sheet metal, welding & fabrication, machine shops., • Mechanical or Industrial Engineering degree, a plus- NOT required., • Experience organizing production operations with a specialty machinery manufacturer., • Organizational Skills:, • Ensuring smooth manufacturing processes, • Meeting deadlines, • Efficiently utilizing resources, • Problem-Solving:, • Identifying issues, • Analyzing root causes, • Implementing effective solutions, • Communication:, • Facilitating clear communication between departments, • Communicating effectively with the workforce, • Adaptability:, • Adjusting production schedules, • Modifying processes, • Allocating resources to adapt to changing environments., • Attention to Detail:, • Maintaining precise specifications, • Upholding quality standards throughout production, • Safety Focus:, • Creating and maintaining a safe work environment, • Promoting a safety culture among the workforce, • Customer Focus:, • Understanding and meeting customer needs, • Ensuring timely delivery and maintaining quality Qualifications: • Close vision, and color vision ability required, • Safely and effectively lifting, carrying, and moving objects of varying weights, • Bending, stooping, reaching, balancing, standing, and walking for extended periods and maintaining the necessary physical dexterity and coordination, • Working in various environmental conditions, which may include exposure to varying temperatures, and noise levels at times Physical Requirements: • Safely and effectively lift, carry, and move objects of varying weights., • Bending, stooping, kneeling, reaching, climbing, balancing, standing, and walking, for extended periods and maintain the necessary physical dexterity and coordination., • Work in various environmental conditions, which may include exposure to varying temperatures, weather, and noise levels. What we offer: • A dynamic, flexible culture, that promotes collaboration and professional/ personal growth of each team member., • To be a part of a well-established team that values hard work, innovation & knows the value of its people., • Coaching and mentoring, helping team members realize their potential, aiding in defining goals and executing them., • We have an aggressive growth strategy; Making way for ample advancement opportunities to transition into operations and/or direct management., • Competitive base package + bonus plan, • We have continuous training, and are firm believers that a strong, knowledgeable, well-trained staff is the reason we are at the top of our field, having continued success., • Our goal as leaders is to provide value, value to our clients, vendors and more importantly to our team- YOU. Looking forward to getting to know you… We are, and work with clients that are equal opportunity employers and considers all applicants for positions without regard to race, color, religion, gender, sexual orientation, age, national origin, disability, veteran status, or any other protected status.

Sheet Metal Installation Technician. Lead and install sheet metal ductwork systems for HVAC projects, ensuring quality and compliance with plans and specifications. Proven experience in sheet metal installation for HVAC systems.

Job DescriptionBenefits: • Holiday Pay, • 401(k), • 401(k) matching, • Health insurance, • Paid time off, • Profit sharing Responsibilities Ensure work areas are clean and clear of debris and scrap material, placed in proper receptacles Assists with general production labor needs such as: Grinding or deburring parts Punching cut parts out of sheet metal Placing and organizing punch parts onto pallets Moving material using pallet jack and/or forklift to appropriate work areas Operating the PEM inserter machine Ability to read and interpret technical drawings, including material type and thickness Skilled in identifying burrs and surface imperfections on metal parts Proficient in using and reading calipers and other precision measuring tools Strict adherence to Personal Protective Equipment (PPE) requirements All other duties as assigned Has the obligation to be aware of and comply with environmental, safety policies and regulations and always endures duties of high-quality standards Job Requirements Ability to work effectively with limited to no supervision Experience in warehouse environment preferred Ability to communicate verbally Excellent time management skills Willingness to adapt and work in a fast-paced manufacturing environment Schedule: 7am to 3:30pm Pay: $20-24/hr.

Job Description Raycap, Inc., an industry leader in manufacturing solutions for telecommunications, renewable energy, transportation, defense, and other applications, is seeking Third Shift Laser Cutting Operators for our Kearny, NJ facility. This is a fast-paced role within a sheet metal manufacturing environment. The Laser Operator is responsible for all functions related to daily production output. This position requires the use of computers, CAD programs, basic hand tools, and precision measurement instruments. Third Shift Schedule: Monday–Friday, 11:00 p.m.–7:30 a.m. Includes an additional shift differential Primary Job Responsibilities: • Program, set up, and operate CNC lasers—preferably AMADA systems, • Collaborate with production leads to meet demand and stay on schedule, • Inspect parts to ensure they meet quality standards and are free of defects, • Perform routine maintenance on machinery, • Maintain a clean and safe work area, • Partner with Quality, Environmental, and H&S teams to ensure compliance with all operational and regulatory requirements, • Minimum of 2 years’ experience in laser programming and setup, preferably with AMADA equipment or similar sheet metal CNC systems, • Ability to read and interpret 2D prints, 3D models, and work instructions, • Knowledge of sheet metal processes, nitrogen usage, and feed rates, • Proficiency with basic measurement instruments to verify component accuracy, • Strong verbal communication skills, • Excellent time management, • Ability to lift up to 50 lbs., and to stand, bend, and move frequently throughout the shift, • Experience in sheet metal fabrication, • Understanding of laser machine capabilities and limitations, including cut settings, • Experience with NC coding, including making edits based on job requirements UNION: IBEW Local Union 3 BENEFITS: Please reference the IBEW Local 3 Union Contract for details on all benefits. • Medical/Dental/Vision/HRA/Annuity - 6 months from date of hire, • Vacation Time - will begin effective June 30th, after 6 months of continuous employment, • Sick Time - will begin accruing from day one, • Mandatory Union Dues - $7/week, $28/month, • Mandatory One-Time $182 Union Application Fee Drug-free workplace.

Job Description Raycap, Inc., an industry leader in manufacturing solutions for telecommunications, renewable energy, transportation, defense, and other applications, is currently looking for second shift Press Brake/Machine Operators in our Kearny, NJ facility. This is a fast-paced position in a sheet metal manufacturing environment. Job Summary: The Press Brake operator is responsible for all functions related to daily production output. This position requires the use of computers, CAD programs, basic hand tools, and measurement instruments. Third shift: Monday-Friday, 11:00 p.m. through 7:00 a.m. Primary Job Responsibilities: • Program, set up and operate a CNC Press Brake, preferably Amada, • Communicate with production leads on meeting demands and following schedules, • Inspect production parts for defects and quality standards, • Perform routine maintenance on machinery, • Maintain work area and ensure a clean, safe work environment, • Experience in sheet metal fabrication, • 2 years of minimum experience in programming and setup, • Ability to read and interpret 2D prints, 3D models, and work instructions, • Knowledge of press brake tooling, • Ability to use basic measurement instruments to verify that components meet requirements, • Ability to communicate verbally, • Excellent time management skills, • Ability to Lift up to 50 lbs, Stand and Bend frequently without issue UNION: IBEW Local Union 3 BENEFITS: Please reference the IBEW Local 3 Union Contract for details on all benefits. • Medical/Dental/Vision/HRA/Annuity - 6 months from date of hire, • Vacation Time - will begin effective June 30th, after 6 months of continuous employment, • Sick Time - will begin accruing from day one, • Mandatory Union Dues - $7/week, $28/month, • Mandatory One-Time $182 Union Application Fee, • 12 Paid Holidays Raycap is an Equal Opportunity / Affirmative Action Employer. All qualified applicants receive consideration for employment without regard to age, disability, race, color, national origin, sex, marital status, sexual orientation, religion, creed, veteran or military status, or other protected status. We participate in E-verify for all employment verifications. Drug-free workplace.

Job Description Job Summary The Switchboard Engineer I is responsible for Designing Low Voltage Switchboards and Panelboards. This role requires great attention to detail and a self-starting mentality. All products must be designed using applicable safety standards & regulations (National Electrical Code, Underwriters Laboratories, etc.). Primary Job Responsibilities • Design 3D Sheet Metal Parts With Flat Patterns, • Complete 3D Assemblies (150+ Item BOM), • Create Wiring Diagrams Using PLCs, Breaker Accessories, Relays, Contactors, Power Supplies etc., • Create & Understand 2D Front View, One-Line/Single-Line & Layout Drawings Using CAD Software, • Ensure Clear Communication Between Engineering, Manufacturing & Other Key Stakeholders, • Work In A Team Environment to Analyze Requirements From Clients & Develop Design Solutions, • Bachelor’s Degree of Science in Mechanical or Electrical Engineering or Similar, • 2-5 Years Of Work Experience (Electro-Mechanical Industry Preferred), • Proficiency In 2D & 3D CAD Software (AutoDesk Suite preferred), • Proficient With Microsoft Office Products, • Experience With UL891, UL67, UL508A or UL1558, • Experience Reading/Understanding National Electric Code, • Experience Sizing Conductors & OCPDs Raycap, Inc. has decades of experience creating products that protect and support the world’s most valuable assets from power and lightning surges. We focus on 5 Core Values of Customer Focus, Talent, Excellence, Innovation and Integrity, and those values show in everything we do. We also believe it is very important to invest in our employees, and we are proud to offer: • A very competitive benefit package, • Paid Time Off, • 10 company paid holidays, • Tuition Reimbursement, • A generous 401(k) employer contribution Raycap is an Equal Opportunity / Affirmative Action Employer. All qualified applicants receive consideration for employment without regard to age, disability, race, color, national origin, sex, marital status, sexual orientation, religion, creed, veteran or military status, or other protected status. We participate in E-verify for all employment verifications. Drug-free workplace

Job Description Position Description A client of AlphaStaffHCM is seeking a motivated and enthusiastic Mechanical Engineer to join our dynamic engineering team. As a Mechanical Engineer, you will play a key role in the design, development, and testing of hardware components for our innovative projects. This position drives the mechanical design of server chassis for quantum photonic systems, the structural platforms that house, support, and stabilize quantum computing hardware ensuring precise integration of electronics, power distribution, cabling, cooling and optical components. This position offers a unique opportunity to be at the forefront of quantum technology, contributing to the advancement of groundbreaking solutions in the rapidly evolving field of quantum computing. If you are passionate about changing the world by empowering revolutionary new quantum technologies, we want to hear from you! Duties and Responsibilities • Closely work with engineering teams to review the product specification and design of chassis mechanical, thermal, system architecture to enable competitive, high quality server chassis products, • Support the development of several platforms based around classical and quantum photonics as a mechanical engineer., • Drive designs from concept to mass production, focusing on functionality, reliability, manufacturability and cosmetic requirements., • Create and publish detailed 3D CAD and 2D drawings for designs including GD&T, material selection and manufacturing methods., • Collaborate with external vendors and manufacturers to support product development, prototyping, and production readiness, • Cross-functional work with internal teams such as hardware, photonics, operations, and product managers to deliver products that meet performance, cost, and schedule requirements., • Participate in the prototyping and assembly of products and proof-of-concept models. Soldering work will be present., • Work closely with senior engineers to implement design changes and enhancements., • Maintain accurate documentation of design changes, test procedures, and project progress., • Prepare reports and presentations for detailed design reviews. Required Skills and Experience • Bachelor of Science (BS) or Master of Science (MS) in Mechanical Engineering, Product Design or related field from an accredited university., • Minimum 3-4 years of full-time experience in the design and correlation of mechanical components including: plastic or metal parts, mechanical assemblies, printed circuit boards or flexes., • Product development and management experience in server chassis mechanical, thermal, and system design, • Experience with server system architecture and server chassis layout optimization, • Experience in developing server product architectures and carrying through to production., • General technical knowledge in multiple manufacturing methods used in consumer products such as 3D printing, urethane casting, injection molding, sheet metal, CNC machining etc., • System integration experience, including electro-opto mechanical components (Optics, lens, Motors, Mirrors, translation stages etc.), heat transfer and product architecture, • Experience with using CAD tools such as Solidworks, NX or Creo, and PDM tools such as Solidworks PDM, Windchill (Solidworks and SolidworksPDM experience is preferred), • Familiar with product development cycles, • Experience working with manufacturing vendors and suppliers, • Ability to work in a startup environment., • Technical knowledge in general materials., • Able to lift weights up to OSHA limit (50 lbs.) when required (occasionally)., • Excellent problem-solving and analytical skills., • Excellent written and verbal communication skills., • Detail-oriented. Preferred Skills and Experience • Prior work on server chassis design or data center server hardware is highly valued, as it demonstrates familiarity with the unique challenges of complex system integration of optical, electrical, and mechanical components., • Experience with designing airflow paths, heat sinks, fans, or liquid cooling loops that keep cutting-edge systems within safe temperatures., • Strong understanding of compliance-driven design requirements, including EMI and ESD. Disclaimers: AlphaStaff, Inc. and the Client are equal employment opportunity employers and do not discriminate against any applicant or employee based on race, color, sex, sexual orientation, gender identity, religion, national origin, age, past or present military service, disability, genetic information, or any other basis protected by applicable federal, state, or local laws.

Job Description We are a premier architectural lighting design and manufacturing company in northern New Jersey seeking a Lighting Applications Product Engineer to join our team. This role is ideal for someone who enjoys working at the intersection of architectural design, product engineering, and real-world manufacturing. You will play a key role in supporting sales by translating architectural requirements conveyed in ceiling plans into functional configurations of our products, providing approval and manufacturing drawings, and helping support the manufacturing process to ensure successful production execution. Key Responsibilities • Extract detailed requirements from architectural drawings in support of sales process., • Collaborate with sales teams to evaluate fixture capabilities that align with project goals, • Design and layout companies commercial lighting fixtures to meet architectural and performance requirements, • Create and/or revise detailed CAD drawing submittals for client approval, • Create drawings and CNC control programs for factory fabrication of lighting fixtures, • Work closely with manufacturing to ensure feasibility, efficiency, and quality, • Troubleshoot and resolve technical issues related to fabrication and installation Qualifications • Bachelor’s degree in Engineering, Industrial Design, or related field (or equivalent experience), • Experience in:, • Lighting industry, OR, • Product design / engineered-to-order manufacturing, • Proficiency in AutoCAD, SolidWorks, or similar CAD software, • Strong understanding of:, • LED lighting systems and components, • Electrical fundamentals (drivers, wiring, controls), • Manufacturing processes (sheet metal, extrusion, assembly), • Ability to interpret architectural drawings and specifications, • Strong communication and problem-solving skills Compensation & Benefits • Salary: $60,000 – $80,000 (based on experience), • Health benefits, • Paid time off, • Opportunity to work on custom, high-impact projects in a growing company Why Join Us • Work on unique, custom-engineered products—not commodity items, • Direct impact on projects from concept through manufacturing, • Collaborative environment with engineering, sales, and production, • Opportunity for growth in a specialized, high-value niche Apply Now If you are a motivated engineer who enjoys solving real-world design challenges and working with both customers and manufacturing teams, we’d like to hear from you.

Job DescriptionThis is a temporary 6-month contracted W2 position. The pay range for this position is $40-$45/hr (depending on experience) • Interprets customer specifications to define requirements for mechanical designs., • Performs first principal analysis related to appropriate aspects of mechanical design., • Applies the 3D CAD system to create mechanical design and drawings., • Develops detailed fabrication and assembly drawings and performs tolerance analysis., • Develop prototypes for design evaluation., • Troubleshoot and resolve design & processing issues., • Contributes to details of design documentation using electronic documentation systems., • Collects, analyzes and interprets data to propose recommendations., • Develops & execute design verification protocols and technical reports., • Work with internal and external resources on fabrication, inspection, and testing of new product parts and assemblies., • Develop & debug prototype tooling / equipment and processes., • Develop test methods and fixtures., • Formulate plans & methods to accomplish assignments with appropriate oversight., • Works independently and prioritizes assigned tasks with guidance., • Contribute to project planning activities., • Design for Manufacturability and Assembly, DFM&A (cost/tooling/process considerations), preferably using SolidWorks CAD software., • Understanding in design and development of injection molded plastic, plastic extrusion, casting, sheet metal, metal stampings, additive manufacturing processes, and machined metal components, and assemblies with high part counts highly desirable., • Knowledge of mechanical design and development using metric ANSI/ISO dimensioning and drafting standards highly desirable., • Understanding of GD&T, mechanical measurement and testing equip., and statistical analysis of test data., • Experience with electronic document control systems in medical device and/or medical equipment design and development., • Highly skilled at analytical reasoning, mechanism design, creative problem solving, and mathematical analysis., • Ability to create and meet scheduled timelines (manage and coordinate tasks as required)., • Ability to work in a team environment., • Strong communication skills., • Competent in use of Microsoft Office tools., • Ability to operate test equipment such as various pressure and flow measurement equipment, temperature/humidity chambers, PC-based data recorders, simulators, DVM’s and oscilloscopes., • Familiarity and the ability to operate basic shop equipment such as hand tools, a drill, and Dremel., • Understand & interpret simple wiring diagrams., • BS in engineering discipline, mechanical preferred., • Minimum 2-4 years related experience, or an MS and less than one year experience., • Experience with a solid modeling CAD program, preferably Solidworks., • Experience in medical equipment / device design with experience in electromechanical, electro-pneumatic, and/or blood pumping equipment development., • Knowledge in medical device industry regulations and practices – ISO 13485, ISO 7198 & GMP., • Proficiency with Microsoft Windows, MS Office applications, and Adobe Acrobat., • Experience with Microsoft Visio and Microsoft Project preferred.#LI-RS1 Important Notice: Protecting Your Information Medvacon Talent Acquisition only conducts initial video interviews via Microsoft Teams or Zoom. All communication will come from an email address ending in @medvacon.com. If you receive a message that seems suspicious or is not from our official domain, please report it immediately to . Powered by JazzHR sQgsnMwpe0

Job DescriptionThis is a temporary 6-month contracted W2 position. The pay range for this position is $70-$85/hr (depending on prior experience) Job Functions: • Applies expertise as an emerging authority in the mechanical engineering discipline., • Conceives and develops solutions to difficult analytical and pneumatic/mechanical/electrical design problems., • Participates in establishing system or component design objectives and writes portions of complex specifications and engineering reports., • Reviews and helps to develop product specifications, • Conducts conceptual design studies using MCAD and other applicable design tools. Collaborates with other engineering functions, • Develops prototype hardware using internal manufacturing resources and outside vendors, • Tests product to verify that designs meet specification requirements such as environmental, regulatory and safety requirements, • Generates documentation supporting the design, • Design for Manufacturability and Assembly, DFM&A (cost/tooling/process considerations), preferably using SolidWorks CAD software., • Understanding in design and development of injection molded plastic, plastic extrusion, casting, sheet metal, metal stampings, additive manufacturing processes, and machined metal components, and assemblies with high part counts highly desirable., • Knowledge of mechanical design and development using metric ANSI/ISO dimensioning and drafting standards highly desirable., • Understanding of GD&T, mechanical measurement and testing equip., and statistical analysis of test data., • Experience with electronic document control systems in medical device and/or medical equipment design and development., • Highly skilled at analytical reasoning, mechanism design, creative problem solving, and mathematical analysis., • Ability to create and meet scheduled timelines (manage and coordinate tasks as required)., • Ability to work in a team environment., • Strong communication skills., • Familiarity with dimensioning and tolerance, thermal and structural analysis, and vibration testing/analysis, • Intermediate knowledge of FDA, IEC and UL standards relating to medical electronic equipment, • Strong technical and analytical ability, verbal and written communication skills, ingenuity and creativity, interpersonal and project management skills, • Ability to operate test equipment such as various pressure and flow measurement equipment, temperature/humidity chambers, PC-based data recorders, simulators, DVM’s and oscilloscopes, • BSME or MSME and a minimum of 10 years of related experience in design/product development of electro pneumatic assemblies including technical supervision of sub-projects, • Formal training in basic and advanced topics in Solid Works is strongly preferred, • Proficiency with Microsoft Windows, MS Office applications, and Adobe Acrobat, • Advanced proficiency with SolidWorks, MCAD/CAE software and database management software preferred, • Advanced proficiency with Microsoft Visio and Microsoft Project preferred Important Notice: Protecting Your Information Medvacon Talent Acquisition only conducts initial video interviews via Microsoft Teams or Zoom. All communication will come from an email address ending in @medvacon.com. If you receive a message that seems suspicious or is not from our official domain, please report it immediately to . Powered by JazzHR QpHnpP1sVI

Program, set up, and operate CNC lasers-preferably AMADA systems. Minimum of 2 years' experience in laser programming and setup, preferably with AMADA equipment or similar sheet metal CNC systems.

Your new role: TRUMPF Field Service Engineer Travel to install, services, troubleshoot and repair TRUMPF CNC fabricating machine tools at customer sites throughout the United States, Canada and Mexico Provide high-quality technical service to customers to ensure optimal sheet metal machine performa

Job Description A Metal Shop in Paterson, NJ is looking for a Sheet Metal Mechanic experienced in Fabricating and Assembly of Stainless Steel Equipment, Shear, Punching and Notching

We are seeking an experienced Sheet Metal Foreman who will lead a crew of 5-10 members on-site, effectively managing and working alongside the team. Assemble, install, and repair sheet metal products such as ducts, control boxes, and furnace casings. Use soldering and welding equipment to join sheet

Interstate Air Conditioning & Heating employs a staff of over 50, including service technicians, piping mechanics, sheet metal installers, project managers, estimators, and administrators. This position is responsible for managing an active sheet metal installation crew. This position requires someo

How you'll help us Keep Climbing (overview & key responsibilities).At Delta Air Lines, connection is at the heart of everything we do and guides our every action.We strive to welcome and care for all of our customers during their travels with us and aim to deliver an elevated experience.As a Lead Gr

How you'll help us Keep Climbing (overview & key responsibilities).At Delta Air Lines, connection is at the heart of everything we do and guides our every action.We strive to welcome and care for all of our customers during their travels with us and aim to deliver an elevated experience.As a Ground

How you'll help us Keep Climbing (overview & key responsibilities).At Delta Air Lines, connection is at the heart of everything we do and guides our every action.We strive to welcome and care for all of our customers during their travels with us and aim to deliver an elevated experience.As a Lead Gr

Join BLT’s team of dedicated professionals as a .This position performs various hands-on maintenance duties necessary to maintain and enhance the value of our luxury community located in Jersey City, NJ.Duties & Responsibilities of the .Assists in completing work in “make-ready” apartments,

How you'll help us Keep Climbing (overview & key responsibilities).At Delta Air Lines, connection is at the heart of everything we do and guides our every action.We strive to welcome and care for all of our customers during their travels with us and aim to deliver an elevated experience.As a Ground

Walmart is expanding its massive workforce, and American Career Guide is here to help you explore available roles at the retail giant.Positions are open across multiple departments, offering career paths for both entry-level talent and experienced professionals.Join the Walmart team and help provide

How you'll help us Keep Climbing (overview & key responsibilities).At Delta Air Lines, connection is at the heart of everything we do and guides our every action.We strive to welcome and care for all of our customers during their travels with us and aim to deliver an elevated experience.As a Ground

How you'll help us Keep Climbing (overview & key responsibilities).At Delta Air Lines, connection is at the heart of everything we do and guides our every action.We strive to welcome and care for all of our customers during their travels with us and aim to deliver an elevated experience.As a Ground

Brookdale Senior Living - 590 Old Hook Road - Responsibilities: Keeping our communities running in top-notch condition by performing maintenance on HVAC, elevator, fire and sprinkler equipment, generators, landscape, kitchen equipment and emergency pull cord equipment; Perform general maintenance pr

FedEx - 58 60 55 Drive - Responsibilities: Provide timely, quality maintenance for FedEx vehicle fleet and ground support equipment.Document work with appropriate repair orders and parts ordering using FedEx computer systems.Ensure work is in accordance with OSHA and DOT standards.Guide and support

Install or repair sheetrock and other wall coverings.

Aerotek - JobID: JP-005854546 [Production Operator / Assembly Line Worker] As a Mechanical Assembly Worker at Aerotek, you'll: Perform mechanical assembly on different electronic products; Read and interpret blueprints, and quality-check the final products; Perform other duties as assigned.

Crane Worldwide Logistics - 484 Washington Avenue - Responsibilities: Sign off bill of lading and cross check packing list; Pick, put away, and load/unload materials using warehouse equipment; Scan freight via warehouse management system with RF equipment; Counts, weighs, and records number of units

Aerotek - JobID: JP-005851603 [Production Operator / Assembly Line Worker] As an Assembler at Aerotek, you'll: Perform assembling, loading, and unloading of parts; Be involved in a fast-paced environment and many overtime opportunities; Perform other duties as assigned.

Responsibilities: Respond to work orders for minor repairs to equipment; Order and manage parts inventory; Complete daily reports and schedule/prioritize assignments; Read, understand, and follow service manual guidelines; Work safely and handle other duties as assigned.

Hackensack Meridian Health - - Responsibilities: Receives supplies/materials, unpacking boxes and verifying packing lists; Delivers supplies/materials as directed by supervisor; Removes empty containers and boxes, discarding them in the proper location; Assists in annual inventory; Identifies distr

Shamin Hotels - - Responsibilities: Troubleshoot and repair hotel equipment, facilities, and systems (including HVAC and electrical); Perform preventative maintenance and regular inspections; Coordinate maintenance staff; Inspect and repair minor problems in guest rooms; Inspect and repair minor pr

Marmon - - Responsibilities: Maintain and repair all production equipment; Perform preventive maintenance to production equipment; Organize and maintain an organized maintenance shop; Interact with Engineer & Production Team; coordinate jobs/projects on a daily basis; Review all work orders and com

Cardinal Health - - Responsibilities: Troubleshoot electrical and mechanical equipment including, not limited to conveyors, HVAC systems including chillers, boilers, air handler units, & split systems; Perform light electrical, plumbing repairs, installations, and system maintenance throughout the

UFC GYM - - Responsibilities: Conducts a daily safety walk-through of the Facility to identify and address any immediate safety concerns.Works on special projects as directed by the General Manager and Operations Manager.Maintains the history file on all equipment.Procure repair parts, materials, t