Trabajos sheet metal en Hoboken, New JerseyCrear alertas

Job DescriptionBenefits: • 401(k), • Company car, • Competitive salary, • Dental insurance, • Free uniforms, • Health insurance, • Opportunity for advancement, • Paid time off, • Parental leave, • Training & development, • Vision insurance We are looking to fill a full time permanent HVAC Installer Position: We are a Lite Commercial and Residential Contractor. Our installs are high end residential split systems, lite commercial split & package systems, sheetmetal ductwork and Heat pump Systems. We offer top wages and benefits with support for a path to achieve maximum potential. • Experience with residential and light commercial HVAC equipment, furnaces, boiler, water heaters, split systems duct free and roof top units, • Experience with sheet metal ductwork, duct work fittings and accessories, • Experience with piping, cutting, soldering, brazing threading and pipe associated craft, • Ability to install humidification systems and associated accessories, • Familiar with control wiring, thermostats and their installation, • Be able to install and start up installed equipment and adjust to the manufacturers and job specifications, • Be able to troubleshoot, adapt and resolve / repair all issues that arise during installation that would keep the equipment from functioning properly, • Perform required documentation for each installation with a complete startup record, • Must have a customer service attitude, • Must work well within a team environment, • Continuously improve knowledge of general HVAC practices, • Must have a clean valid Drivers LicenseWe offer the following: * Top pay for your dedication, time and knowledge, • Vacation, sick and personal days, • 7 Paid Holidays, • Company clothing and apparel, • Health Benefits, • Retirement Plan (401K Plan), • Profit Sharing Participation, • Bonus and incentive program, • Company outings and events, • On and off site training opportunitiesOur company provides a family environment where you are treated and respected and given the opportunity to grow, learn and enjoy your life! Required experience: • 5 years HVAC Installation experienceJob Type: Full-time Benefits: • 401(k), • Dental insurance, • Employee discount, • Health insurance, • Paid time off, • Referral program, • Vision insuranceSchedule:, • 10 hour shift, • 8 hour shiftSupplemental Pay:, • Signing bonusEducation:, • High school or equivalent (Preferred)Experience:, • HVAC: 2 years (Required)License/Certification:, • EPA Universal Certification (Preferred)Work Location: Multiple locations

Job Description A1 EMS INC. — Expert Mechanical Services is hiring experienced HVAC installers and installation mechanics for commercial and residential projects throughout Long Island and New York City. We are looking for dependable mechanics who take pride in their work, understand proper installation practices, and can complete assigned work without constant supervision. You should be comfortable working with a team, coordinating with the office, and representing the company professionally at customer locations. A minimum of five years of hands-on HVAC installation experience is required. This is not an entry-level or helper position. Responsibilities • Install and replace rooftop units, split systems, heat pumps, ductless systems, furnaces, and air handlers, including removal of existing equipment and coordination of new equipment placement., • Install and connect sheet-metal ductwork, transitions, dampers, supports, insulation, and related air-distribution components., • Install refrigerant piping, braze with nitrogen flow, pressure-test for leaks, evacuate systems using a micron gauge, and charge equipment according to manufacturer requirements., • Install condensate drains, traps, drain pans, pumps, and overflow protection. Install thermostats and low-voltage controls, and coordinate regulated electrical and gas work with appropriately licensed trades., • Read plans, wiring diagrams, and installation instructions. Complete startup checks, verify system operation, document readings, maintain clean jobsites, and direct helpers when assigned. Required Qualifications • At least five years of hands-on HVAC installation experience. Trade school is valuable but does not replace the required field experience., • Ability to independently complete installation tasks, use trade tools properly, identify installation problems, and follow manufacturer requirements., • EPA Section 608 Type II or Universal certification., • Valid driver’s license and the ability to meet agreed reporting arrangements and travel between assigned jobs. Work is performed throughout both Long Island and New York City., • Reliable attendance, professional communication, accurate job documentation, safe work practices, and authorization to work in the United States. Preferred Experience Commercial rooftop replacements, installation crew leadership, boiler and hydronic installations, advanced sheet-metal work, and equipment startup experience are valuable. EPA Universal certification, OSHA 30, NYC SST credentials, A2L refrigerant training, and manufacturer training are a plus. Required site-specific credentials must be obtained before applicable assignments. Compensation and Schedule Base pay: $35–$50 per hour. Starting pay will reflect your relevant experience, installation skills, certifications, and ability to independently complete or lead installations. Overtime is paid in accordance with applicable law. Normal working hours, reporting arrangements, travel requirements, and any scheduled overtime or weekend work will be reviewed during the hiring process. Work Environment This is an in-person field position involving rooftops, ladders, mechanical rooms, and handling tools and equipment. Applicants must be able to perform the essential duties safely, with or without reasonable accommodation, using appropriate lifting equipment or assistance. How to Apply Apply through this posting with your resume or a brief work history. A formal resume is helpful but not required. Please include answers to the following questions: • How many years of hands-on HVAC installation experience do you have?, • What types of equipment have you installed, and which installation tasks can you complete independently?, • Which EPA certification and other trade or safety credentials do you hold?, • Can you work at assigned jobs throughout both Long Island and New York City?, • What hourly rate are you seeking within the posted range, and when would you be available to start?

Job Description We are looking for a skilled and detail-oriented HVAC Sheet Metal Project Estimator to join our team. This role is responsible for preparing accurate cost estimates for HVAC sheet metal fabrication and installation projects. Responsibilities: • Prepare accurate and complete HVAC sheet metal estimates for fabrication and installation projects, • Perform quantity takeoffs for sheet metal, equipment, and accessories, • Review project specifications, drawings, and contract documents, • Determine project scope of work and required estimate components, • Develop detailed labor and material cost estimates, • Prepare and manage change orders based on revised mechanical/shop drawings, • Maintain organized files of all working documents, including pricing from suppliers and cost data, • Collaborate effectively with internal teams and vendors Qualifications: • Minimum 2-5+ years of sheet metal estimating experience preferred, • Strong knowledge of HVAC systems and sheet metal fabrication, • Proven ability to prepare accurate and complete estimates, • Excellent verbal and written communication skills, • Strong organizational and time management skills, • Ability to prioritize multiple projects and deadlines, • Detail-oriented with strong analytical and problem-solving skills, • Strong negotiation and leadership abilities, • Self-motivated with a strong work ethic.\nCompany Description Founded in 1992, ALL-CITY METAL, INC., is a leader in both sheet metal HVAC fabrication and installation, as well as the fabrication, manufacturing and installation of Trash Compactors, Trash Chutes, Linen Chutes and chute doors. We are a full service company that designs and manufactures our products onsite in the USA. We offer a variety of products including the above and related specialty items, accessories, hardware and components. Founded in 1992, ALL-CITY METAL, INC., is a leader in both sheet metal HVAC fabrication and installation, as well as the fabrication, manufacturing and installation of Trash Compactors, Trash Chutes, Linen Chutes and chute doors. We are a full service company that designs and manufactures our products onsite in the USA. We offer a variety of products including the above and related specialty items, accessories, hardware and components.

Job Description A well established HVAC organization is looking for an experienced HVAC Installer to join our growing team serving primarily Jersey City and the surrounding Hudson County area. We have been serving customers since 1953, and while we are a smaller company today, with approximately 10 employees, we are growing. This is an opportunity to join a close-knit team where your experience matters, your work is visible, and you can take ownership of installations from start to finish. This is a hands-on role for an experienced installer who knows how to work through the challenges that come with HVAC installation in a city, including tight spaces, multi-story buildings, difficult equipment access, custom ductwork, and situations where a crane simply is not an option. If you take pride in doing the job correctly, can work with minimal supervision, and have broad residential and light commercial installation experience, we want to hear from you. What You'll Do As an HVAC Installer, you will install and replace residential and light commercial HVAC equipment while ensuring every job is completed safely, professionally, and in accordance with applicable codes. Responsibilities include: • Install and replace furnaces, air conditioning systems, condensers, air handlers, heat pumps, boilers, water heaters, mini-split systems, rooftop units, and related HVAC equipment., • Perform residential and light commercial installations throughout Hudson County, primarily in Jersey City., • Disassemble and reassemble packaged HVAC units on site when equipment cannot be moved into place by crane., • Fabricate, modify, and install ductwork transitions on site as required for individual installations., • Install sheet metal, flexible ductwork, vents, and other air distribution components., • Safely transport equipment and components through tight stairwells, attics, crawl spaces, closets, rooftops, and other challenging installation environments., • Read and interpret equipment specifications, installation instructions, mechanical plans, and technical documentation., • Complete installations in compliance with manufacturer requirements and applicable local, state, and federal codes., • Follow proper refrigerant handling and job-site safety procedures., • Coordinate with management and dispatch to keep installations on schedule., • Troubleshoot installation-related issues and determine appropriate solutions in the field., • Maintain clean, safe, and organized job sites., • Test completed installations and verify proper system operation., • Explain newly installed systems and basic operation to homeowners and customers., • Use company mobile applications, tablets, and field-service software to document work as required. Required Qualifications Candidates must meet the following requirements: • 5+ years of hands-on HVAC installation experience., • Demonstrated experience installing and working with:, • Mini-split systems, • Boilers, • Water heaters, • Rooftop units (RTUs), • Hot-air furnaces, • Central air conditioning systems, • Heat pumps, • Residential and light commercial HVAC systems, • Hands-on experience disassembling and reassembling packaged HVAC units., • Ability to fabricate and modify ductwork and duct transitions on site., • Strong knowledge of HVAC installation procedures, equipment, tools, and safety practices., • Ability to use hand tools, power tools, sheet-metal tools, and HVAC installation equipment safely and effectively., • Ability to independently work through field installation challenges and troubleshoot problems as they arise., • Valid driver's license, • Fluent English, • Ability to safely lift and carry at least 50 pounds, including equipment and components.

Job Description Essential HVAC Installer Duties & Responsibilities The primary function is the installation of new or replacement HVAC systems (furnaces, air conditioners, heat pumps, air handlers, etc.) in residential or commercial settings. System Installation: Installing heating, cooling, and ventilation equipment according to manufacturer specifications and company requirements. Ductwork: Fabricating and installing sheet metal and flex duct systems, vents, and air distribution components. Piping & Wiring: Installing copper refrigerant lines (including brazing and soldering), properly connecting gas lines, and wiring both low and high voltage to the equipment. Blueprint Reading: Interpreting blueprints, schematics, and technical diagrams to plan system layouts and complete installations correctly. Performance Testing: Performing system start-ups and testing performance, checking refrigerant levels, airflow, and calibrating thermostats. Compliance: Ensuring all installations comply with local, state, and federal codes, including proper safety procedures and refrigerant handling regulations. Customer Interaction: Explaining the system operation and maintenance to the customer and ensuring a high level of satisfaction. Logistics: Pre-measuring jobs to determine material needs, verifying, loading, and stocking company vehicles with equipment and parts. ✨ Key Skills and Qualifications Required Skills & Qualifications Technical: • Proficiency with hand and power tools, • Strong mechanical aptitude and problem-solving skills, • Ability to read and interpret technical documents Physical: • Physical ability to lift heavy equipment (up to 50-100 lbs), • Comfort working in confined spaces (attics, crawl spaces) and on roofs/ladders, • Ability to work in various weather conditions and extreme temperatures Professional: • Valid NJ driver's license, • Must have 4 years of experience, • Excellent customer service and communication skills, • High level of attention to detail and commitment to safety, • Ability to work independently and as part of a team We value our team and are committed to supporting your long-term financial well-being. Following one year of continuous employment with our company, you will become eligible for enhanced benefits.

Mechanical Engineer Brooklyn, NY About the Company Aerflo is redefining hydration on the go with the world's first portable soda maker that turns still water into sparkling water anytime, anywhere. Rooted in innovation, good design, and sustainability, we're building a future where sparkling water is more accessible, less wasteful, and infinitely more enjoyable. OVERVIEW We are seeking an enthusiastic and creative Principal Mechanical Engineer to help drive our engineering and product roadmap to and through commercial launch. Qualifications • 4+ years mechanical design or equivalent experience, • B.S. in Mechanical Engineering experience, • Experience developing product from concept through to launch, • Experience doing development and production planning work with contract manufacturers, • Proficient in Onshape or similar CAD package (Solidworks, NX or similar), • Experience in quality management and quality systems (e.g. Six Sigma, FAI, CPK etc.), • Demonstrated ability to work proactively to identify issues and propose solutions., • Experience in Design for Manufacturability (DFM), and Design for Assembly (DFA), statistical tolerance analysis techniques, functional dimensioning, and geometric tolerancing, with focus on high volume manufacturing, • Experience with core manufacturing methods including sheet metal, injection molding, machining and casting, • Willingness to be hands-on with prototyping and testing, • Able to work in a fast-paced, ever changing environment to deliver optimal solutions at prescribed time frame, • Happy and able to travel internationally (~5%), • Self-motivated, hands on and good team player alongside strong leadership skills, • Proficient in failure analysis as to identify sources of variation contributing to failure mode Ideal if • Experience designing systems, O-rings, and seals for high pressure gas, • Ideally have experience of working in a regulated industry, • Direct experience with startups/growth-stage companies Responsibilities • Play an active part to provide leadership within the ME department, • You will play a key role in ensuring mechanical design robustness, manufacturability, time to market, and cost goals are all met, • Problem solving and root cause analysis of product failures, • Write and implement test plans at the design and production phases, • Design CAD drawings, mechanical renderings, and other relevant mechanical design content, • Create 2D drawings for design and ensure appropriate product definitions and design controls, • Troubleshoot and solve performance problems during development and in production, • Clearly document and communicate your work to engineering and product teams, • Create and lead engineering changes for updates and improvements to existing products, • Collaborate with a global network of suppliers throughout development phases to ensure quality and performance, • To create and maintain a culture of high standards to meet the vision and mission of the ME department, • Safeguarding product quality – responsible to drive DPPM at customer to minimum by analyzing failure and implementing corrective actions (Internal/External). Who you will work with • You will report directly to the Co-President, • You will work multi-functional with many teams including Program Management, Product Management, Operations, Quality, Supply Chain Compensation Compensation will be determined by experience and demonstrated impact. In addition to base salary, this role is eligible for an annual performance bonus and participation in the company's long-term incentive plan. Benefits include 401(k), full health coverage, and paid time off. Final compensation will depend on a variety of factors determining the base pay at offer, including but not limited to: skills, qualifications, and experience. Candidates must be authorized to work in the United States on a full-time basis without the need for current or future employer-sponsored work authorization. Equal Opportunity Statement Aerflo is an equal opportunity employer and celebrates diversity. We are committed to creating a workplace founded on mutual respect, equal opportunity, and freedom from discrimination or harassment. We make employment decisions based on business needs, job requirements, and individual qualifications. If you require accommodations during the recruitment process, please let us know.

About Sims Metal Sims Metal (Sims) is a global leader in metal recycling. With facilities across the globe, Sims plays an intrinsic role in the circular economy by making resources available for future use. As responsible corporate citizens, we continuously seek new ways to broaden our participation in the environmental sector, ensuring that our future is as bright, safe, and secure as ever in our long history. Purpose of Role Reporting to the Financial Controller, the Accounting Manager supports the financial control and reporting function to ensure the accuracy, integrity, and timeliness of financial information. Working closely with the Financial Controller and the broader finance team, this role supports financial reporting, compliance, internal controls, and cash flow monitoring. The position also serves as the Business Unit’s primary technical accounting expert, provides accounting guidance to operational and commercial stakeholders, supports audit processes, and contributes to ongoing process improvements within the finance function. Principal Accountabilities Financial Reporting • Assist in preparing monthly, quarterly, and annual financial statements, including the Balance Sheet, Profit & Loss, and Cash Flow., • Support compliance with applicable accounting standards (IFRS) and internal reporting policies., • Assist with Business Unit reporting requirements for half-year and year-end reporting cycles, including supporting disclosures and audit deliverables., • Support coordination of external and statutory audits, including preparation of audit schedules and responding to queries. Internal Controls & Governance • Support the implementation and monitoring of internal control policies and procedures., • Assist in maintaining documentation of financial processes and controls., • Contribute to strengthening the control environment and identifying areas for improvement. Technical Accounting & Advisory • Act as the primary technical accounting expert for the Business Unit. Where relevant, provide technical accounting training and guidance to finance and operational teams., • Provide accounting and financial guidance on contracts, capital projects, restructures, strategic initiatives, system or process changes, and acquisition activities., • Assess accounting treatment for significant and non-routine transactions, with reference to IFRS 15 Revenue from Contracts with Customers, IFRS 16 Leases, IAS 36 Impairment of Assets, IAS 37 Provisions, Contingent Liabilities and Contingent Assets, and IFRS 3 Business Combinations., • Prepare accounting position papers and technical assessments for review by Group Finance., • Ensure local accounting practices remain aligned with Group Accounting Policies., • Partner with Group Finance to support implementation of new and revised IFRS standards within the Business Unit. Balance Sheet, Capital & Asset Planning • Oversee the balance sheet reconciliation process, ensure timely resolution of reconciling items, and confirm that balance sheet positions accurately reflect underlying business activities., • Review capitalization assessments and asset disposals, ensuring alignment with Group capital expenditure policies and IFRS requirements., • Support impairment assessments and asset valuation reviews where required. Cash Flow & Working Capital • Assist with cash flow monitoring and liquidity reporting., • Support working capital analysis across receivables, payables, and inventory., • Partner with Treasury and operational teams to improve cash management processes. Financial Analysis • Perform financial analysis and assist with interpretation of financial statement trends., • Support collaboration with FP&A and business unit teams to provide reporting insights. Key Performance Indicators (KPIs) • No reported non-compliance with IFRS or Group Accounting Policies., • Monthly reporting timetables met., • Timely completion of the BU component audit and delivery of local audited accounts to statutory timelines., • Reduction in audit issues, with internal and external audit findings remediated within agreed timeframes., • Timely completion of balance sheet reconciliations and reduction in aged reconciling items., • High-quality technical accounting assessments delivered on time., • Successful implementation of new and revised accounting standards Experience / Qualifications Required • Degree in Finance, Accounting, Economics, or related discipline, • Strong knowledge of IFRS and technical accounting requirements., • Proven experience partnering with business stakeholders to deliver financial insights and support data-driven decision-making., • CA/CPA qualification (or equivalent),, • Understanding of internal controls frameworks., • Experience working with internal and external auditors., • ERP system experience, • Experience with reconciliation and reporting tools, such as BlackLine and Power BI, and familiarity with Hyperion HFM Sims Limited is proud to be an equal opportunity employer. We value the diversity of all employees and are committed to creating an inclusive working environment where everyone can contribute, advance on merit, and realize their full potential. The company does not discriminate regarding race, sex, religion, color, national origin, citizenship status, disability, age, marital or familial status, sexual orientation, gender identity, gender expression, veteran status, housing status, source of income, or any other status protected by federal, state, or local laws. This applies to any employment decision, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Qualified applicants with a disability needing a reasonable accommodation may request such without fear of reprisal or discrimination. If you are passionate about and eager to make a difference in the recycling industry, we invite you to apply today and help us secure our future at Sims Limited. To learn more about Sims Limited, please visit www.simsltd.com for more information on Sims and its commitment to sustainability.

Mechanical / Optomechanical Engineer — Job Description The role Mechanical / Optomechanical Engineer — Production Engineering · Brooklyn Navy Yard, NY · Full-time, on-site We are seeking a Mechanical/Optomechanical Engineer to join our Production Engineering Team at Qunnect. As a core member of the design team, you'll transform quantum-optics prototypes into rack-mounted products that are optimized for manufacturing and robust performance. The role entails general mechanical design (chassis, enclosures, structures and rack integration) and optomechanical design of the fiber/free-space assemblies inside our Carina product suite. You'll own the documentation, fixtures and processes that support the assembly, characterization and support teams. This is a full-time, on-site, mid-level role in a fast-paced, multidisciplinary R&D setting. You'll sit in Production Engineering and work closely with our prototype engineers, our science team, and the assembly technicians who build our products. The majority of this role will be production work, with a share supporting new designs in prototyping. About Qunnect. Qunnect is a dynamic, venture-backed startup at the Brooklyn Navy Yard. We build and deploy first-in-class hardware that transforms existing telecom fiber into quantum-secure networks for defense, intelligence, financial services and critical infrastructure customers. Our products sit at the intersection of optics, atomic physics and electronics, and are deployed on commercial fiber networks in the US and Europe. Key responsibilities Mechanical Design • Chassis and enclosures. Design 19" rack-mount chassis, module housings and internal structures in sheet metal and machined parts, balancing stiffness, weight, cost and serviceability., • Rack and system integration. Package optical modules, electronics, power supplies, cabling and fiber management into complete cabinet systems, with sensible airflow and heat management, and own the mechanical side of interfaces with the electrical team., • Field robustness. Design for shipping, installation and uncontrolled telecom environments, and back it up with analysis and test where it matters. Optomechanical Design • Design for production. Take prototype optomechanical layouts — diode laser mounts, atomic vapor cell assemblies, polarization optics, fiber couplers and free-space beam paths — and redesign them for stability, manufacturability and cost., • Alignment and stability. Design epoxied and fixed-optic assemblies, with the tolerance stack-ups and alignment budgets to show they hold alignment through temperature changes, transport and service. Process Responsibilities • Define interfaces. Specify and document the mechanical and optical interfaces between modules and subsystems so teams can design to them independently., • Build the manufacturing package. Produce drawings, BOMs, assembly and alignment procedures, and acceptance tests; design the fixtures and tooling technicians use on the floor., • Run change control. Release and revise designs through our Engineering Change Order process, and help build out the design-specification and PLM infrastructure around it as we grow., • Close the loop with the floor. Work hands-on with assembly technicians to diagnose yield and build problems, then fix the root cause in the design or process., • Manage vendors. Work with machine shops, sheet-metal fabricators and optics suppliers; qualify suppliers and incoming parts., • Support deployments. When necessary, help our field support team install and support our systems at customer and partner facilities, incorporating feedback into future designs. Required qualifications • B.S. or M.S. in Mechanical Engineering (preferred), Optical Engineering, Physics or a related field., • 3–6 years designing precision mechanical or optomechanical hardware, with at least one design you carried from concept into production or repeated builds., • Strong 3D CAD (SolidWorks preferred) and clear, production-ready drawings., • Design for manufacturing across machined, sheet-metal and purchased parts, including DFM feedback from shops and fabricators., • Thermal design fundamentals: heat paths, forced-air cooling, and thermal expansion effects on precision assemblies., • Optomechanical fundamentals: kinematic and fixed/epoxied optic mounting, and translating optical requirements (pointing, beam height, coupling efficiency) into mechanical tolerances., • Hands-on lab and build skills, including basic free-space alignment and fiber coupling., • Clear technical writing., • Strong communication skills and a collaborative mindset; comfortable working across physics, electrical and manufacturing teams., • Proficiency with modern digital tools to streamline your workflow. Preferred qualifications • Experience packaging diode lasers (butterfly, ECDL, DBR) and managing optical feedback and isolation., • Polarization-maintaining fiber, polarization optics and fiber management in compact enclosures., • GD&T, and FEA for structural or thermal analysis (SolidWorks Simulation, ANSYS, COMSOL)., • Designing rack-mounted or field-deployed instruments, including integrating third-party equipment such as cryostats, compressors or UPS units., • Setting up or working within PLM and formal change-control systems., • Python, MATLAB or Mathematica for analysis, modeling or test automation, including analyzing test data to evaluate build quality or system performance. Compensation and logistics • Job type: Full-time, on-site at our Brooklyn Navy Yard lab and production facility, with potential for travel to customer sites and network deployments., • Reports to: Head of Product, within Production Engineering., • Compensation: $125,000 to $175,000 USD per year, commensurate with experience, • Benefits: 401(k) with company matching; health, vision and dental insurance; paid time off., • Supplemental compensation: Bonus pay and stock options. We don't expect candidates to match every qualification above — if the work excites you, apply. At Qunnect, we offer a stimulating and collaborative work environment, competitive compensation, and the chance to build hardware at the forefront of quantum networking. Must be physically located in the United States and legally able to work in the United States. We are not able to support work authorization sponsorship for this role. Qunnect is an equal opportunity employer. We do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status.

Job Description Job Title: Switchgear Design Engineer (UL891) Job Location: Charleston, SC / North Charleston, SC In-Office, Hybrid or Remote: On-site Working Hours: Full-time Languages: English required What the Client Offers: Salary: USD $105,000 – $140,000 Comprehensive benefits package Paid time off + 10 company holidays Tuition reimbursement 401(k) with strong employer contribution Stable, growth-oriented environment within a specialized engineering sector Relocation support available for the right candidate About the Client: Inner Circle Agency is hiring on behalf of a well-established engineering and manufacturing organization specializing in power distribution and electrical infrastructure. The company supports critical industries including energy, telecommunications, and industrial systems, delivering high-performance, safety-compliant solutions. Role Overview: Our client is seeking a detail-oriented Switchgear Design Engineer (UL891) to design low voltage switchboards and panelboards. This role is based in the Charleston area, with relocation support available for the right candidate. You will play a key role in developing complex electrical systems and collaborating with cross-functional teams to bring designs from concept to production. Key Responsibilities: Design low voltage switchboards and panelboards in compliance with applicable standards and regulations Create 3D sheet metal components and flat patterns Develop complex 3D assemblies with large multi-component BOMs Produce wiring diagrams including PLCs, relays, breakers, and power systems Generate 2D drawings including layouts, single-line diagrams, and front views Collaborate with engineering, manufacturing, and vendors to ensure accurate execution Translate client requirements into practical and efficient design solutions Qualifications:Required: Bachelor’s degree in Mechanical or Electrical Engineering (or related field) 4 - 8 years of professional experience (working for UL891 OEM or Equivalent) Strong proficiency in 2D and 3D CAD software (Autodesk preferred) Solid understanding of electrical systems and design principles Strong communication and collaboration skills Preferred: Experience with UL standards (UL891, UL67, UL508A, UL1558) Familiarity with the National Electrical Code (NEC) Experience sizing conductors and overcurrent protection devices (OCPDs) Knowledge of control circuits and electrical logic

Job Description MR. AIR NYC Lead Ductless / Heat Pump Installer Job type: Full-time Work location: Based in Brooklyn, with field installations throughout New York City Base pay: $40-$52 per hour, based on relevant experience, demonstrated competency, and leadership ability About the Position MR. AIR NYC is seeking an experienced Lead HVAC Installer to independently lead complex ductless mini-split, heat-pump, and related HVAC installations throughout New York City. Our work includes residential and light-commercial projects in brownstones, townhouses, apartments, condominiums, co-ops, commercial spaces, and older NYC buildings. Projects may involve challenging equipment access, line-set routing, condensate management, masonry, finished interiors, roof access, electrical coordination, and occupied spaces. This is a senior field position for an installer who can lead a crew, solve difficult jobsite conditions, maintain high workmanship standards, communicate professionally, and help develop less-experienced installers. Responsibilities • Lead installation crews from jobsite arrival through system commissioning and customer handoff., • Review project scope, equipment, drawings, routing, access, materials, and job readiness before work begins., • Assign responsibilities based on crew members' skills and level of supervision required., • Identify conditions that differ from the approved scope and escalate significant design or project conflicts before making changes., • Install and supervise ductless mini-split, heat-pump, multi-zone, cassette, concealed-ducted, VRF, and related systems., • Install and verify refrigerant piping, flare preparation, torque practices, insulation, supports, and piping protection., • Perform or verify nitrogen pressure testing, evacuation, micron testing, startup, and commissioning., • Install and verify electrical and communication wiring within the scope of the HVAC installation., • Install and verify condensate piping, pumps, float switches, drains, and terminations., • Identify installation conditions that may create water-leak, drainage, access, or serviceability problems., • Maintain high workmanship standards for equipment placement, routing, supports, line-hide, penetrations, sealing, patching, cleanup, and property protection., • Verify proper system operation before completing each installation., • Complete required project documentation and photographs., • Communicate professionally with customers, office personnel, and other project stakeholders., • Maintain jobsite organization and follow company safety requirements., • Confirm that crews have the appropriate tools, ladders, materials, equipment, and access to perform work safely., • Stop and escalate work when a project is not ready or cannot be completed safely or according to approved requirements. Crew Leadership and Training • Lead Installers are expected to help develop less-experienced field employees. Responsibilities include:, • Demonstrating proper installation procedures., • Explaining why specific installation methods and standards are required., • Giving helpers and developing installers clear assignments., • Supervising appropriate hands-on work., • Inspecting work and providing constructive technical feedback., • Participating in competency evaluations and signoffs., • Helping develop future Assistant Leads and Lead Installers., • Participating in paid field-training sessions., • Communicating field problems constructively to sales, design, operations, and service personnel., • Raising safety, material, access, scope, and project-readiness concerns early. Qualifications • Approximately 5+ years of HVAC installation experience strongly preferred., • Significant ductless mini-split and heat-pump installation experience., • Demonstrated experience independently leading HVAC installations., • EPA Section 608 certification appropriate to the work; Universal certification strongly preferred., • Strong knowledge of refrigerant-piping and installation practices., • Experience with nitrogen pressure testing, evacuation, and micron-level verification., • Strong condensate and water-management practices., • Ability to read manufacturer installation instructions, equipment schedules, project plans, and technical documentation., • Working knowledge of HVAC electrical and control wiring., • Ability to identify field conditions that require escalation., • Experience directing helpers or developing installers., • Professional customer communication skills., • Ability to work safely in active residential and commercial environments throughout New York City., • Ability to communicate technical instructions, safety concerns, workmanship corrections, and jobsite information effectively with coworkers, customers, and office personnel. + Preferred Experience • Experience with any of the following is especially valuable, • Mitsubishi Electric, CITY MULTI/VRF, Fujitsu, or Daikin systems., • Multi-zone systems, branch boxes, ceiling cassettes, or concealed ducted systems., • Sheet-metal or duct-fabrication work., • Brownstone, townhouse, historic-building, or retrofit HVAC projects., • Difficult interior or exterior line-set routing., • Core drilling, masonry, carpentry, or finish work., • Condensate-pump and complex drainage systems., • Roof installations., • Training apprentices, helpers, or developing installers., • Additional language skills that support effective communication within a multilingual workforce. Compensation and Benefits • Base pay is $40-$52 per hour, based on relevant experience, demonstrated technical competency, and leadership ability., • Company Truck, • Fuel Card, • Referral Program, • Professional Development Assistance, • IRA Similar to 401(k), • Health Insurance, • Retirement Plan, • Tools Provided, • Paid Time Off (PTO), • Employee Discount, • Employee Assistance Program, • Paid Holidays, • Flexible Schedule (no Sundays, Sometimes Saturdays), • No On Call, • Paid technical training and field-lab sessions are part of this position. Career Development Qualified Lead Installers may advance into positions such as Senior Lead Installer, Field Trainer, Installation Supervisor, or Field Operations leadership based on technical skill, workmanship, reliability, communication, leadership, and ability to develop others. Hiring Process Qualified candidates may participate in: 1. An initial experience and availability screen., 2. A structured technical interview., 3. A practical installation assessment., 4. A crew-leadership and communication assessment., 5. Verification of relevant credentials and driving qualifications, where applicable. 6. Reference checks., 6. A paid field assessment, where appropriate. Any field assessment involving productive work will be paid. Candidates will not be charged fees to apply for or obtain this position. MR. AIR NYC provides equal employment opportunities to qualified applicants and employees without unlawful discrimination based on protected characteristics.

Job Description Full-Time Positions Available: • Sheet Metal Duct Shop Fabricator, • Sheet Metal Duct Installer (Tin Knocker) and or HELPER, • HVAC Service Technician/Mechanic, • Delivery Driver, • Bookkeeper (Office Worker) ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- Sheet Metal Duct Shop Fabricator: We have a full operating sheet metal fabrication shop. We fabricate duct work for commercial and residential buildings. Responsibilities • Operate Plasma to cut 5'x10' sheets of metal., • Operate machines to cut, shape, and form sheet metal including roller, rotodie, shear, punch press, hand brake, weighting machine, plasma cutters, and more., • Drill and punch holes in metal, for electrical components, screws, bolts, or rivets., • Fasten seams and joints together with welds, bolts, cement, rivets, solder, caulks, metal drive clips, and bonds to assemble components into products or to repair sheet metal items., • Trim, file, grind, buff, and smooth surfaces, seams, and joints of assembled parts, using hand tools and portable power tools., • Finish parts, using hacksaws, and hand, rotary, or squaring shears., • Develop and lay out patterns that use materials most efficiently., • Insulate ductwork using glue & pinspotter., • Maintain equipment, making repairs and modifications when necessary. --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- Sheet Metal Duct Installer (Tin knockers) Position: Responsibilities: • · Installation of a variety of Commercial HVAC equipment, • · Installation of a variety of HVAC DUCTWORK (round, spiral, rectangular), • · Sheet metal Fabrication in the field as necessary., • · Responsible for sheet metal measurements, sketching and ordering ductwork. Requirements: • · Reading and interpreting blueprints, • · To have a basic understanding of central air conditioning systems, • · Should be reliable, self-motivated, have the ability and knowledge to read specifications and Shop Drawings., • · Should possess good communication skills, • · Must be able to maintain a safe work area, • · Should also have a flexible attitude and should be willing to travel at any given point of time --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- HVAC Service Mechanic Position: Responsibilities: · Install new heating, ventilation, and air conditioning systems · Inspect and perform equipment repairs and replacements · Perform routine preventative maintenance · Respond to emergency maintenance requests · Adhere to all safety policies and procedures · Responsible for the installation of large mini-split systems, including refrigeration piping, pipe insulation, and control wiring · Perform start-up of newly installed HVAC systems · Perform Service repairs and troubleshooting diagnostics to existing HVAC systems · Perform in the field using related experience and knowledge of codes and specifications. Qualifications: · Previous experience in HVAC or other related fields (minimum of 5 years prior experience) · Familiarity with HVAC wiring diagrams · Ability to handle physical workload · Run Refrigeration piping · Strong problem solving and critical thinking skills · Qualified individuals most possess a full-range of mechanical knowledge · Ability to Navigate NYC Subway Systems Delivery Driver: • Looking for a driver to deliver Duct work and material to job sites daily., • When not making deliveries, driver will help fabricate duct work Education · Technical trade school diploma and training certificate is a plus · Minimum of 5 years’ experience in a commercial HVAC application and Ductwork installation • Helpers Minimum of 2 years' experience in commercial and or Residential · OSHA 30 hours \nCompany Description We've been in business for 40 + years and continue to grow each and every day. We're looking for highly motivated individuals to join the success of keeping New York City happy. We've been in business for 40 + years and continue to grow each and every day. We're looking for highly motivated individuals to join the success of keeping New York City happy.

Job Description Mechanical Engineer Mechanical Engineer – Mid-Level Reports To: Mechanical Engineering Manager We are seeking a Mechanical Engineer to take ownership of the design, engineering, documentation, and technical support of assigned mechanical projects. This is a hands-on role requiring strong knowledge of machine design, power transmission, manufacturing, fabrication, and mechanical systems. The ideal candidate can take a project from specification and concept through design, fabrication, testing, and final documentation while working closely with Sales, Drafting, Electrical Engineering, Production, and Service. Background Requirements • Bachelor of Science degree in Mechanical Engineering., • 3–7 years of relevant mechanical engineering experience, preferably in machine design, industrial equipment, or manufacturing., • Strong background in machine design and power transmission technologies., • Working knowledge of sheet metal fabrication, structural steel, welding, shop fabrication processes, and manufacturing methods., • Understanding of strength of materials, thermodynamics, fluid dynamics, and mechanical engineering principles., • Practical experience with AutoCAD; experience with Autodesk Inventor is preferred., • Strong understanding of engineering drawings, tolerances, materials, components, and manufacturing processes., • Strong analytical, problem-solving, organizational, and communication skills. Primary Responsibilities • Take full responsibility for the engineering and design of assigned mechanical projects, from initial specifications through production, testing, and project closeout., • Review machine specifications for completeness, technical feasibility, and manufacturability., • Perform engineering calculations to determine equipment requirements and support sound component, machine, and feeder design., • Create or direct the creation of layouts, sketches, detail drawings, assembly drawings, approval drawings, and 3D models., • Work closely with the Drafting Department to ensure drawings are accurate, complete, and meet engineering requirements., • Review completed drawings for accuracy, dimensions, tolerances, and technical content., • Create and maintain accurate Bills of Materials (BOMs) and engineering documentation., • Specify, document, and procure non-stock and buy-out components., • Recommend product improvements and manufacturing methods that improve quality, performance, reliability, cost, or manufacturability., • Coordinate with Electrical Engineering on electro-mechanical design and integration issues., • Support Sales with technical information, project requirements, and customer-related engineering questions., • Prepare drawing transmittals and approval documentation for customer review., • Work directly with Production to resolve engineering issues and provide assembly instructions, drawing clarifications, and technical support., • Perform periodic in-process fabrication and assembly inspections to ensure work meets engineering requirements., • Perform incoming inspections of specialty buy-out components., • Perform final inspections of completed equipment and ensure all equipment documentation is accurate and up to date., • Provide technical assistance to the Service Department, particularly during equipment testing and commissioning., • Close out assigned projects and provide all required documentation to Sales in a timely manner., • Maintain accurate records of project work and time spent on assigned tasks., • Follow all company policies, procedures, engineering standards, and safety requirements. What Makes You a Great Fit You are a practical, hands-on engineer who understands that good mechanical design must work in the real world. You can move comfortably between engineering calculations, CAD drawings, the production floor, and conversations with customers, suppliers, drafters, and technicians. You take ownership of your projects, pay attention to detail, solve problems quickly, and look for ways to make equipment safer, more reliable, easier to manufacture, and more cost-effective. What We Offer • Competitive salary and benefits package., • Professional growth opportunities in a collaborative team environment., • Exposure to diverse, technically challenging projects., • Supportive workplace culture with opportunities for mentorship and leadership., • A dynamic, flexible culture, that promotes collaboration and professional/ personal growth of each team member., • To be a part of a well-established team that values hard work, innovation & knows the value of its people., • Coaching, mentoring helping team members realize their potential, aiding in defining goals and executing them., • We are privately owned with an aggressive growth strategy; Making way for ample advancement opportunities to transition into operations and/or direct management., • Competitive base package + bonus plan, • We have continuous training, and are firm believers that a strong, knowledgeable, well-trained staff is the reason we are at the top of our field, having continued success., • Our goal as leaders is to provide value, value to our clients, vendors and more importantly to our team - YOU! Mechanical Engineer | Mid-Level Mechanical Engineer | Mechanical Design Engineer | Machine Design | Mechanical Design | Power Transmission | AutoCAD | Autodesk Inventor | Industrial Equipment | Machine Engineering | Manufacturing | Sheet Metal Fabrication | Structural Steel | Welding | Mechanical Systems | Engineering Drawings | CAD | BOM | Bills of Materials | DFM | Design for Manufacturing | Quality Inspection | Equipment Design | Electro-Mechanical Systems | Product Improvement Looking forward to getting to know you… We are, and work with clients that are equal opportunity employers and considers all applicants for positions without regard to race, color, religion, gender, sexual orientation, age, national origin, disability, veteran status, or any other protected status.

Job Description Position Title: Assembly Technician Location: Brooklyn, NY (E. Williamsburg) Duration: 60–90-day Contract-to-Hire, with the potential to convert to FTE. Employment Type: Contract role on W-2 through Above and Beyond Talent Acquisition, Inc. (A&B Talent) Work Arrangement: On-site 2nd shift (3 pm-11 pm) Pay rate: 25/hr plus OT Client Info / Who they are: Above and Beyond Talent Acquisition represents an innovative industrial technology company transforming control panel manufacturing through software-enabled design and automated fabrication. Their technology is helping modernize the industrial supply chain by significantly reducing lead times for critical electrical equipment from months to just days. The company has raised over $23M from leading investors and is focused on building scalable technology to improve how essential industrial equipment is designed and manufactured. Who we are looking for / Requirements: • High school diploma or equivalent, • Mechanically inclined and experience doing light sheet metal modification work, • Attention to detail in following written instructions, • Understanding of electrical fundamentals (AC vs DC voltage, function of overcurrent protection devices, sizing of wiring), • Proficient in Microsoft Office, • Able to work on your feet 8 hours/day, • Able to lift items that are 25 lbs, • Available to work in-person in Brooklyn, NY Monday through Friday. Preferred • Experience working in a UL 508A panel shop or with industrial control panels, • Familiar with DTM, E3, EPLAN, or AutoCAD Electrical Performance Objectives / What you'll be doing: • Modify enclosures to include cutouts for panel-mounted devices., • Retrieve components from stockroom and help maintain stockroom inventory levels, • Mount components to the panel and wire them together based on work instructions, • Complete inspection procedures to ensure panels were assembled correctly, • Assist with preparing completed panels for shipping, and help load/unload goods from trucks when needed., • Test new methods and operate prototype automated equipment to help improve the speed and quality of the panels Podium builds, and provide constructive and detailed feedback. Perks of working with us/ What we offer • Eligibility for Health, dental, and vision insurance, • Participation in Company 401K plan w/ Employer Match The salary, other compensation, and benefits information are accurate as of the date of this posting. The Company reserves the right to modify this information at any time, subject to applicable law. “Above and Beyond Talent is an equal opportunity employer and staffing firm.”

Job Description Position Title: Assembly Technician Location: Brooklyn, NY (E. Williamsburg) Duration: 60–90-day Contract-to-Hire, with the potential to convert to FTE. Employment Type: Contract role on W-2 through Above and Beyond Talent Acquisition, Inc. (A&B Talent) Work Arrangement: On-site 2nd shift (3 pm-11 pm) Pay rate: 25/hr plus OT Client Info / Who they are: Above and Beyond Talent Acquisition represents an innovative industrial technology company transforming control panel manufacturing through software-enabled design and automated fabrication. Their technology is helping modernize the industrial supply chain by significantly reducing lead times for critical electrical equipment from months to just days. The company has raised over $23M from leading investors and is focused on building scalable technology to improve how essential industrial equipment is designed and manufactured. Who we are looking for / Requirements: High school diploma or equivalent Mechanically inclined and experience doing light sheet metal modification work Attention to detail in following written instructions Understanding of electrical fundamentals (AC vs DC voltage, function of overcurrent protection devices, sizing of wiring) Proficient in Microsoft Office Able to work on your feet 8 hours/day Able to lift items that are 25 lbs Available to work in-person in Brooklyn, NY Monday through Friday. Preferred Experience working in a UL 508A panel shop or with industrial control panels Familiar with DTM, E3, EPLAN, or AutoCAD Electrical Performance Objectives / What you'll be doing: Modify enclosures to include cutouts for panel-mounted devices. Retrieve components from stockroom and help maintain stockroom inventory levels Mount components to the panel and wire them together based on work instructions Complete inspection procedures to ensure panels were assembled correctly Assist with preparing completed panels for shipping, and help load/unload goods from trucks when needed. Test new methods and operate prototype automated equipment to help improve the speed and quality of the panels Podium builds, and provide constructive and detailed feedback. Perks of working with us/ What we offer Eligibility for Health, dental, and vision insurance Participation in Company 401K plan w/ Employer Match The salary, other compensation, and benefits information are accurate as of the date of this posting. The Company reserves the right to modify this information at any time, subject to applicable law. “Above and Beyond Talent is an equal opportunity employer and staffing firm.”

Job Description:\n\nDOT Construction is seeking an experienced, hands-on Working Workshop Lead to oversee daily operations within our construction workshop and fabrication area while actively working alongside the crew. This is a working leadership position. The Workshop Lead is expected to remain on the tools, lead by example, lay out work, fabricate components, review drawings, train craftsmen, solve fabrication issues, inspect finished products, and ensure that everything produced in the workshop meets DOT Construction quality standards. The Workshop Lead will coordinate daily shop production, manpower, materials, tools, equipment, fabrication sequencing, quality control, safety, housekeeping, inventory, and preparation of completed work for delivery to active construction projects. The ideal candidate understands how to build high-quality work and how to lead others in producing it consistently. Hands On Workshop Leadership Lead the Shop From the Floor Take ownership of daily workshop operations and ensure fabricated products are completed safely, accurately, efficiently, and to a professional commercial-construction standard. Be a Working Lead Work alongside the crew and participate directly in the production activities required to meet project schedules and quality expectations, including: · Construction layout and measurement · Cutting, fitting, fabrication, and assembly · Finish carpentry, cabinetry, millwork, and architectural woodwork · Metal fabrication and miscellaneous steel work where applicable · Drilling, fastening, hardware installation, sanding, and surface preparation · Specialty construction assemblies, mockups, prototypes, and prefabricated field assemblies · Repairs, modifications, punch-list corrections, and preparation for field installation Lead by Example Set the standard for craftsmanship, accuracy, productivity, professionalism, safety, organization, cleanliness, material care, tool care, and accountability. The Workshop Lead should not accept work that fails to meet the approved drawings or DOT Construction quality standards. Craftsmanship and Quality Control Build It Right Before It Leaves the Shop DOT Construction expects a high level of craftsmanship from every product fabricated within the workshop. Quality must be maintained throughout the fabrication process, not checked only after production is complete. The Working Workshop Lead will establish and maintain a shop culture in which craftsmen take pride in the finished product. Responsibilities include: · Review drawings, details, and approved submittals before fabrication begins. · Verify dimensions before materials are cut and confirm field dimensions when required. · Verify material type, thickness, grade, finish, grain, and orientation. · Establish and enforce fabrication tolerances. · Check squareness, level, plumb, alignment, fit, joint quality, and consistent reveals. · Verify fastener type, spacing, placement, and attachment methods. · Inspect exposed finished surfaces and prevent scratches, dents, chips, gouges, poor cuts, glue residue, and excessive weld marks. · Verify hardware placement and confirm completed assemblies operate correctly. · Check finished dimensions before shipment and require immediate correction of deficient work. · Protect completed products from damage and perform a final quality-control inspection before release to the field. Nothing should leave the DOT Construction workshop unless it is ready to be installed and presented to the owner, architect, or client with confidence. Construction Drawing and Shop Drawing Review Know What You Are Building Before Cutting Material The Working Workshop Lead must be comfortable reading and interpreting construction information, including: · Architectural and structural drawings · Interior elevations, wall sections, and construction details · Finish, door, and hardware schedules · Millwork, shop, and fabrication drawings · Manufacturer instructions and approved product data · Submittals, RFIs, addenda, field sketches, and project specifications · Verified field dimensions and installation requirements The Workshop Lead must compare drawings, measurements, materials, and fabrication requirements before materials are cut or assemblies are built. When information appears incomplete, conflicting, or incorrect, follow this process: · Stop the questionable fabrication before material is wasted. · Verify the drawing, detail, field condition, or dimension. · Document the discrepancy clearly. · Notify the Project Manager or Superintendent. · Obtain direction or clarification before proceeding. · Resume fabrication after the requirement is understood and documented. The Workshop Lead is expected to identify problems before they become wasted material, rework, schedule delays, or field installation problems. Production Planning and Workflow Know What Needs to Be Built Next The Working Workshop Lead must understand what the crew is building today and what will be required over the coming weeks. Responsibilities include: · Review upcoming fabrication requirements and approved production information. · Establish daily and weekly production goals. · Prioritize fabrication according to project schedules and field installation needs. · Coordinate regularly with Project Managers and Superintendents. · Determine manpower needs and assign work according to employee skill level. · Confirm required materials, approved drawings, and field dimensions are available. · Identify long-lead materials and production constraints early. · Sequence fabrication, finishing, staging, and delivery efficiently. · Develop recovery plans when production begins falling behind. · Prevent field crews from waiting on shop-fabricated materials whenever reasonably possible. A successful Workshop Lead should understand tomorrow's workload and prepare the crew, materials, tools, and information required to execute it. Crew Leadership and Training The Working Workshop Lead will supervise craftsmen, helpers, laborers, and other employees assigned to the workshop. Responsibilities include: · Assign daily work and explain fabrication requirements clearly. · Demonstrate proper construction and fabrication techniques. · Train less experienced employees and develop their ability to work independently. · Inspect work during fabrication and correct poor workmanship immediately. · Establish reasonable production expectations and monitor employee productivity. · Teach proper tool usage and reinforce safe work practices. · Maintain professional conduct and accountability throughout the shop. · Identify employees capable of taking on greater responsibility. The Workshop Lead must be capable of teaching the work as well as performing it. When an employee does not understand how an item should be built, the Lead should demonstrate the correct method. Material Management Treat Materials Like Company Money Material waste directly affects project profitability. The Working Workshop Lead will maintain control of shop materials and ensure employees use them responsibly. · Review material requirements and quantities before fabrication. · Coordinate purchasing needs with Project Management. · Inspect incoming materials for damage, conformity, and usable condition. · Organize and protect lumber, sheet goods, metals, hardware, finished materials, and specialty products. · Maintain usable remnants when practical and plan cuts to maximize material yield. · Separate damaged, nonconforming, or rejected materials. · Track specialty materials and identify shortages early. · Prevent employees from cutting expensive material before dimensions and requirements are confirmed. Tools and Equipment The Workshop Lead will help maintain accountability for company tools, shop equipment, and fabrication machinery. Equipment may include: · Table saws, miter saws, track saws, circular saws, band saws, and chop saws · Drill presses, routers, sanders, planers, jointers, grinders, and metal-cutting equipment · Welding equipment, compressors, pneumatic tools, and cordless tools · Clamps, layout equipment, levels, lasers, jigs, and specialty fabrication equipment · Forklifts, pallet jacks, ladders, portable lifts, and other material-handling equipment Responsibilities include maintaining tools in safe operating condition, keeping machine guards in place, removing damaged tools from service, maintaining organized storage, preventing avoidable loss, coordinating maintenance, tracking consumables, and ensuring employees use the correct tool for each task. Prefabrication and Field Support A major function of the DOT Construction workshop is to support active project teams. The Workshop Lead may oversee fabrication of: · Custom blocking, backing assemblies, wood framing assemblies, and temporary construction components · Architectural trim, millwork, cabinetry, shelving, casework, and finish components · Door and hardware modifications, equipment supports, specialty brackets, and metal frames · Miscellaneous steel items, equipment stands, protective barriers, templates, and jigs · Mockups, prototypes, and project-specific fabricated assemblies Shop fabrication should make field installation faster, cleaner, safer, and more predictable. Completed work must be clearly identified, protected, and prepared for efficient installation. Mockups and Prototypes Before repetitive fabrication begins, the Working Workshop Lead may be required to produce a first-piece assembly, prototype, or mockup to verify: · Dimensions, materials, appearance, fit, and finish · Hardware, attachment methods, fabrication sequence, and installation requirements Once approved, the accepted mockup establishes the quality standard for the remaining production run. Repeated fabrication must remain consistent with that standard. Finish Quality Special attention must be given to items that will remain visible after construction is complete. Finished work should be exhibited: · Straight cuts, clean edges, tight joints, and smooth transitions · Consistent reveals, uniform spacing, proper alignment, and accurate dimensions · Correct fastener placement with minimal exposed fasteners where they are not intended · Professional surface preparation and a clean, consistent finish · Properly installed hardware and correct fit, function, and operation The completed work must withstand close review and reflect professional commercial-construction craftsmanship. Safety Management Maintain a Professional and Safe Workshop The Working Workshop Lead is responsible for maintaining a safe workshop environment. Responsibilities include: · Enforce DOT Construction safety requirements and applicable OSHA standards. · Require proper personal protective equipment and safe machine operation. · Maintain guards, electrical connections, clear walkways, access, and egress. · Control sawdust, sparks, fabrication debris, cords, hoses, and trip hazards. · Maintain safe material stacking, lifting practices, and material-handling operations. · Keep fire extinguishers accessible and store flammable materials correctly. · Remove damaged tools and equipment from service. · Conduct or participate in toolbox talks and correct unsafe conditions immediately. Production goals never justify unsafe work. The Workshop Lead is expected to plan the work so employees can meet quality and schedule requirements safely. Workshop Organization and Housekeeping The condition of the shop reflects the quality and discipline of the company. The Working Workshop Lead will maintain: · Clean workstations and defined fabrication areas · Organized tools, material racks, hardware storage, cords, and hoses · Clear aisles, access routes, exits, and loading areas · Proper scrap disposal and regular removal of waste · Protected finished-product storage and clearly identified staging areas · Orderly storage for ladders, portable equipment, and material-handling devices Housekeeping is part of daily production. Work areas should be reset throughout the day and ready for the next operation. Shipping Staging and Delivery Preparation Before fabricated materials leave the shop, the Working Workshop Lead will ensure they are properly prepared for transportation and field installation. Responsibilities include: · Complete the final quality-control inspection and verify quantities. · Confirm the project destination and installation location. · Label components and match loose hardware to the correct assemblies. · Protect exposed finishes and package items to prevent transportation damage. · Coordinate loading sequence, delivery timing, and field receiving requirements. · Provide applicable installation drawings, templates, or information with specialty assemblies. Products should arrive at the jobsite ready to be installed, with deficiencies corrected before shipment. Communication and Documentation The Workshop Lead will maintain regular communication with DOT Construction Project Managers and field Superintendents regarding: · Daily production status and completed quantities · Upcoming fabrication and delivery requirements · Material shortages, deliveries, and long-lead concerns · Drawing conflicts and outstanding field dimensions · Equipment issues and manpower requirements · Quality concerns, rework, and corrective action · Schedule concerns, change-order fabrication, and delivery readiness · Shop photographs and other required production documentation When a fabrication issue may affect project cost, quality, or schedule, the Workshop Lead must communicate it promptly and provide enough detail for Project Management to act. Extra Work and Change Management The Workshop Lead must recognize when requested fabrication may fall outside the original project scope. When additional work is requested: · Identify and describe the requested work. · Notify the Project Manager before proceeding whenever possible. · Document labor, materials, and equipment used. · Take photographs and maintain fabrication records when appropriate. · Obtain proper direction and track the work to completion. Shop labor and material have value and must be documented accurately. What We Look for inWhy Join DOT Construction in South Texas? \r\nThe South Texas commercial and industrial construction market continues to grow, and DOT Construction has a strong, multi-year project pipeline. We are looking for experienced craftsmen and construction professionals who want a long-term opportunity, steady work, and a defined career path with a growing contractor.\r\n\r\nOur workshop supports field operations by producing high-quality fabricated components, assemblies, architectural finishes, specialty items, and project-specific materials before they are delivered to the jobsite.\r\n\r\nQuality craftsmanship matters at DOT Construction. We are seeking a skilled construction professional who takes pride in producing clean, accurate work and understands that every item leaving the workshop represents the quality of our company.\r\n\r\nWorking in Texas also means zero state individual income tax and a competitive cost of living, providing an excellent opportunity for experienced construction professionals interested in relocating to South Texas.

Job Description TopView Sightseeing is a New York City-based company offering a variety of sightseeing bus tours. We own and manage the portfolio of brands, including TopView Sightseeing, Event Cruises NYC, Liberty Cruise, Bike Rental Central Park, and Attraction Pass. TopView Sightseeing serves over 500k customers annually, creating unforgettable experiences for New Yorkers and visitors. Join TopView Sightseeing as a Metal Fabricator in Ridgewood, Queens! About the Role: As a Metal Fabricator, you will play a crucial role in the construction of our new fleet of sightseeing buses. You will utilize your expertise in metal fabrication, including welding and assembly techniques, to contribute to exciting and innovative projects. Responsibilities: • Fabricate, assemble, and install sheet metal products., • Light welding: MIG and stick welding as required., • Operate fabricating machines: Cutting, bending, straightening, and shaping metal., • Perform various metalworking tasks: Riveting, drilling, gluing, grinding, and joint preparation., • Maintain a clean and safe workspace., • Contribute to a positive and collaborative team environment. Qualifications: • 1+ years of experience in metal fabrication, • Experience with aluminum and steel fabrication, • Proficiency in using various power tools, • Ability to lift up to 50 lbs., • Ability to pass a pre-employment drug screen, • MIG welding experience (preferred), • Bilingual (English/Spanish) (preferred) Benefits: • Competitive Pay: $20.00 - $22.00 per hour, • Excellent Benefits: Health, dental, vision insurance, • Union Membership: Join TWU Local 100 after 90 days, • Paid Time Off, • Employee Discount Schedule: • 8-hour shifts: 5:30 AM - 2:30 PM (Monday-Friday) or Tuesday-Saturday, • Weekends as needed Powered by JazzHR TFNj6sevjw

Job DescriptionIn your role as a Draftsperson, you excel in CAD drafting, engineering, and 3D modeling, playing a key role in the design direction and engineering methods of each project assigned to you. Your responsibilities include creating, reviewing, and distributing technical drawings and cut files for assigned projects. You help ensure that department tasks stay on track and are prioritized according to the production schedule. Additionally, you assist the Digital Fabrication Office with department improvements, new techniques, and standard engineering practices. You are also responsible for troubleshooting any unforeseen challenges that arise. Please see the 2 bullet points below - we are not considering any applications that do not meet these requirements at the time: • This position operates out of our facility in Brooklyn NY, remote work is not available., • Strong Solidworks proficiency is mandatory. For consideration please submit a resume, and portfolio that includes samples of build drawings to jobs@bednarkinc.com. Below is a more detailed description of this work: • Proficient in creating technical drawings, renderings, and cut files in CAD/3D modeling software. (Solidworks proficiency mandatory, AutoCAD recommend/optional)., • Interprets the Project conception based on sketches, renderings and/or other provided information., • Creates technical drawings, renderings, and 3D models according to the project budget, fabrication capabilities, finishing capabilities, and installation requirements., • Exhibits keen knowledge of home building hardware, furniture hardware, cabinetry hardware, retail fixture hardware, signage, and tradeshow hardware., • Exhibits keen knowledge of standard & special wood, metal, plastic-based engineered sheet goods as well as their applications, properties, dimensions and availability., • Displays competence and awareness of Bednark's fabrication, finishing, CNC machining, and tooling capabilities., • Maintains detail and solution-oriented throughout the entire drafting process., • Strives to learn and develop a strong familiarity with basic kinetic and automation engineering, structural engineering methods, and ballast calculations. Previous Work Experience in One or More of the Following Areas Is a Must: • General Contracting., • Carpentry., • Metalwork., • Cabinet Making., • CNC Programmer or Machinist. Our Ideal Candidate: • Must be detail-oriented and organized., • Strong verbal and written communication skills with the ability to read, understand and produce drawings and details., • Ability to work independently and in a team-oriented environment., • Experienced in visualizing a project through the production & installation process., • Must have regular and punctual attendance., • Ability to meet deadlines. Experience With One or More of the Following Programs Is a Plus: • Rhino., • Fusion360., • AutoCad., • Adobe Illustrator.

Job Description Job Title: Press Brake Operator (2nd Shift) Location: Kearny, New Jersey Compensation: $49,920.00 to $56,160.00 Contractor Work Model: Onsite Hours: 40.0 hours per week Responsibilities • Operate and program CNC Press Brake machines, primarily Amada, setting up machinery, and performing test runs on materials., • Use CAD programs, basic hand tools, measurement instruments, and fine measuring tools to ensure accurate production., • Inspect production parts for defects and ensure they meet quality standards., • Perform routine maintenance on machinery to maintain optimal operation., • Communicate with production leads to meet deadlines and follow production schedules., • Maintain a clean and safe work environment, adhering to safety, operational, and regulatory standards in collaboration with Quality and Environmental Departments. Requirements • High school diploma or equivalent required; post-high school education or training preferred., • At least one (1) year of manufacturing experience pressing, bending, or stamping metal., • Familiar with Press Brake programming and setup., • Ability to read and interpret 2D prints, 3D models, and work instructions., • Experience in sheet metal fabrication is required., • Willingness to work in a fast-paced manufacturing environment. System One, and its subsidiaries including Joulé and Mountain Ltd., are leaders in delivering outsourced services and workforce solutions across North America. We help clients get work done more efficiently and economically, without compromising quality. System One not only serves as a valued partner for our clients, but we offer eligible employees health and welfare benefits coverage options including medical, dental, vision, spending accounts, life insurance, voluntary plans, as well as participation in a 401(k) plan. System One is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender identity, age, national origin, disability, family care or medical leave status, genetic information, veteran status, marital status, or any other characteristic protected by applicable federal, state, or local law. Ref: #562-Joule Staffing - Edison

Job Description Commercial Sheet Metal Working Foreman $130,000–$160,000 Annual Earning Potential | $2,500 Sign-On Bonus | NYC Metro We are hiring an experienced Commercial Sheet Metal Working Foreman to lead a small field crew performing commercial ductwork, damper repairs, and mechanical retrofit work throughout the NYC metro area. This is an opportunity for an experienced foreman or lead mechanic who wants steady commercial work, strong earning potential, and a path into greater field leadership as the company grows. You do not need specialized fire/smoke damper experience. If you're strong with commercial ductwork, know how to lead a crew, and can solve problems in the field, we can train you on the specialized work. What You'll Do • Lead a crew of approximately 2–4 field employees, • Perform and oversee commercial ductwork and damper repairs, • Cut, modify, patch, and install ductwork, access doors, dampers, and transitions, • Coordinate materials, tools, and project requirements, • Train and mentor less-experienced technicians, • Communicate with facility personnel and company leadership, • Keep projects moving safely, professionally, and on schedule Most of the work is in hospitals and healthcare facilities, with additional university, school, and institutional projects. What We're Looking For • 5+ years of commercial ductwork or sheet metal experience, • Foreman, lead mechanic, or senior technician experience, • Strong hands-on ductwork knowledge, • Ability to lead while still working alongside your crew, • Professional communication and customer-facing skills, • Valid driver's license Fire/smoke damper, controls, BMS, air balancing, firestopping, and healthcare experience are strong pluses, but not required. Compensation & Benefits • $130,000–$160,000 annual earning potential, including available overtime, • $2,500 sign-on bonus after 6 months, • 401(k) with up to 4% company contribution, • Approximately 11 paid holidays, • Paid vacation and sick time, • Paid training and certifications, • Company-provided major tools and equipment, • Company vehicle or mileage/travel reimbursement depending on arrangement, • Company iPad, • Supplemental AFLAC benefits available Schedule & Travel Most projects are throughout New York City and the surrounding metro area. The normal schedule is approximately 8:00 AM–4:00 PM, with opportunities for additional earnings through evening, weekend, and other off-hours project work. There is no on-call requirement. Employees typically dispatch directly to the project rather than reporting to a shop every morning. Why This Opportunity? This is a growing operation with a strong pipeline of hospital and institutional work. You'll have direct access to leadership, significant responsibility in the field, and the opportunity to help shape how projects and crews are run. For the right person, this isn't just another mechanic position. We're looking for someone who can help build crews, develop younger technicians, take ownership of projects, and grow into a larger field leadership role. If you're an experienced commercial ductwork professional ready for more responsibility, stronger earning potential, and room to grow, apply today.

Job Description Full time position for a Mechanical Designer to generate and update 3D Autodesk Inventor models for product, tools, and fixture components and assemblies. Generate and update detailed dimensioned drawings for components and assemblies. Generate & update bills of materials. · Develop design concepts and prepares documents for custom designs. Corrects and updates design documents as needed. · Uses computer aided design technologies to develop sketches, drawings and assembly documents. Reviews drawings and documents to assure compliance with company design and production standards. · Ability to read/interpret assembly and product specification drawings. · Create sheet metal fabrication drawings to comply with standards. · Generate assembly drawings for production and customer documentation. · Generate Bill of Materials for data entry and prepare Engineering Change Orders as necessary. · Highly motivated, self-starter · Experience with Autodesk Inventor and AutoCAD. · Sheet metal experience a plus. \nCompany Description VAC-U-MAX specializes in design and manufacture of pneumatic systems and support equipment for conveying, weighing and batching of dry materials. The primary technology for conveying is vacuum, but positive pressure pneumatic systems as well as mechanical conveyors are used as applications dictate. An equally important activity is design and manufacture of heavy duty industrial vacuum cleaners, ranging from small air and electric powered drum styled units to large electric and diesel powered units. VAC-U-MAX specializes in design and manufacture of pneumatic systems and support equipment for conveying, weighing and batching of dry materials. The primary technology for conveying is vacuum, but positive pressure pneumatic systems as well as mechanical conveyors are used as applications dictate. An equally important activity is design and manufacture of heavy duty industrial vacuum cleaners, ranging from small air and electric powered drum styled units to large electric and diesel powered units.

Job Description Manufacturing Manager (Electro-Mechanical Equipment) We are seeking an experienced Manufacturing Manager (or) a seasoned Supervisor ready to transition to a PM with a background in manufacturing of electro-mechanical machinery, and capital equipment. (We will invest in your training, bringing you up to speed with our products) Responsibilities: • Maintained current production schedule, updated daily to track all aspects of equipment orders as they progress and communicate progress., • Manage six (6) supervisors directly, and fifty (60) indirect reports., • Provide the means to establish realistic production schedules that can be met, and schedules that will allow the Company to be competitive with respect to equipment manufacturing lead-times., • Ensure the accurate and timely entry of Production Department data into the IT system., • Conduct weekly production meetings with all applicable Production Personnel to discuss all aspects of production scheduling., • Ensure the proper handling and disposal of all hazardous materials used in the manufacturing process, • Prepare and conduct timely performance reviews for subordinate employees, • Work closely with the 'Materials Manager', who in turn, works closely with the Purchasing Department., • Assist in developing accurate manufacturing time studies that are necessary to develop realistic production scheduling and equipment manufacturing costs, • Ensure that all departments provide the type of cooperation that is essential for Production to meet commitments., • Conduct production meetings to ensure solid inter-departmental communication and continuity regarding all production-related matters., • Ensure a safe and secure work environment within the manufacturing facility., • Prioritize safety as a core value in all aspects of production., • Foster a culture of safety and accountability to minimize workplace incidents and enhance workforce well-being and productivity., • Ensure that the Production Testing Facilities in both buildings are appropriately equipped and maintained clean and tidy Requirements: • Ability to lead, mentor and coach team members., • Solid track record in overall plant management, • Strong work ethic and a high-energy level, • Prior experience with an ERP or MRP system, • Experience in supervision of the production department of a small to medium-size manufacturer., • Exposure to organizations that have in-house sheet metal, welding & fabrication, machine shops., • Mechanical or Industrial Engineering degree, a plus- NOT required., • Experience organizing production operations with a specialty machinery manufacturer., • Organizational Skills:, • Ensuring smooth manufacturing processes, • Meeting deadlines, • Efficiently utilizing resources, • Problem-Solving:, • Identifying issues, • Analyzing root causes, • Implementing effective solutions, • Communication:, • Facilitating clear communication between departments, • Communicating effectively with the workforce, • Adaptability:, • Adjusting production schedules, • Modifying processes, • Allocating resources to adapt to changing environments., • Attention to Detail:, • Maintaining precise specifications, • Upholding quality standards throughout production, • Safety Focus:, • Creating and maintaining a safe work environment, • Promoting a safety culture among the workforce, • Customer Focus:, • Understanding and meeting customer needs, • Ensuring timely delivery and maintaining quality Qualifications: • Close vision, and color vision ability required, • Safely and effectively lifting, carrying, and moving objects of varying weights, • Bending, stooping, reaching, balancing, standing, and walking for extended periods and maintaining the necessary physical dexterity and coordination, • Working in various environmental conditions, which may include exposure to varying temperatures, and noise levels at times Physical Requirements: • Safely and effectively lift, carry, and move objects of varying weights., • Bending, stooping, kneeling, reaching, climbing, balancing, standing, and walking, for extended periods and maintain the necessary physical dexterity and coordination., • Work in various environmental conditions, which may include exposure to varying temperatures, weather, and noise levels. What we offer: • A dynamic, flexible culture, that promotes collaboration and professional/ personal growth of each team member., • To be a part of a well-established team that values hard work, innovation & knows the value of its people., • Coaching and mentoring, helping team members realize their potential, aiding in defining goals and executing them., • We have an aggressive growth strategy; Making way for ample advancement opportunities to transition into operations and/or direct management., • Competitive base package + bonus plan, • We have continuous training, and are firm believers that a strong, knowledgeable, well-trained staff is the reason we are at the top of our field, having continued success., • Our goal as leaders is to provide value, value to our clients, vendors and more importantly to our team- YOU. Looking forward to getting to know you… We are, and work with clients that are equal opportunity employers and considers all applicants for positions without regard to race, color, religion, gender, sexual orientation, age, national origin, disability, veteran status, or any other protected status.

Job Description Job description: About Done Right Hood & Fire Safety Done Right Hood & Fire Safety is a rapidly growing fire life-safety and mechanical services company specializing in commercial kitchen exhaust systems, fire suppression, fabrication, installation, and compliance services throughout New York City, Long Island, and Westchester County. We partner with some of the region’s most recognized restaurants, hospitality groups, and commercial facilities, delivering reliable solutions built on technical expertise, accountability, and long-term relationships. As our company continues to expand, we are seeking a Field Project Manager who thrives outside the office, someone who leads projects directly in the field and ensures successful execution from start to finish. This is not a drafting-only role. We are looking for a hands-on leader who spends approximately 80% of their time on job sites and 20% coordinating internally. Why Join Done Right Hood & Fire Safety? • Stable and rapidly growing company, • Long-term career opportunity with advancement potential, • Direct collaboration with executive leadership, • Diverse projects across NYC’s restaurant and commercial sectors, • Strong team culture focused on accountability and growth, • Exposure to engineering, construction, fabrication, and fire life-safety industries, • Competitive compensation based on experience Benefits & Schedule • Health Insurance, • Dental Insurance, • Vision Insurance, • Commuter Benefits Program, • Paid Holidays, • Paid Sick Time & PTO, • Stable Monday–Friday Schedule, • Full-Time, Long-Term Career Position Position Overview The Field Project Manager is responsible for overseeing mechanical kitchen exhaust and fire suppression projects from kickoff through completion. This role requires an individual comfortable managing active construction environments, coordinating multiple trades, and representing Done Right Hood & Fire Safety directly with clients, contractors, and inspectors. The ideal candidate understands plans and installations but is primarily focused on execution, coordination, and leadership in the field, not sitting behind a desk producing drawings. Key Responsibilities • Review and interpret architectural, mechanical, and construction drawings and specifications., • Prepare accurate project estimates and quotations., • Solicit and coordinate pricing from vendors, suppliers, and subcontractors., • Analyze project requirements and develop competitive bid proposals., • Negotiate pricing, terms, and contracts with general contractors and project stakeholders., • Follow up on bids and proposals to maximize project awards and close sales opportunities., • Schedule and coordinate equipment purchases, fabrication, and material procurement., • Manage equipment deliveries and ensure materials arrive on schedule., • Develop and maintain project schedules, including installation timelines and job durations., • Coordinate labor, subcontractors, and field crews to meet project milestones., • Monitor project costs, change orders, and profitability., • Communicate regularly with contractors, vendors, and customers regarding project status., • Ensure projects are completed safely, on time, and within budget.Qualifications, • Experience in kitchen exhaust systems, HVAC, sheet metal, mechanical contracting, or commercial construction preferred., • Strong ability to read and interpret blueprints, plans, and specifications., • Experience with estimating, project management, procurement, and scheduling., • Proven ability to negotiate contracts and close awarded projects., • Strong organizational, communication, and time-management skills., • Ability to manage multiple projects simultaneously., • Proficiency with Microsoft Office and estimating/project management software., • Self-motivated, detail-oriented, and results-driven.If you think you have what it takes please send a copy of your resume and we will reach out to you for an interview if you qualify! Powered by JazzHR J2da6lvegB

Job DescriptionAbout Us: We are a rapidly growing manufacturing company specializing in custom enclosures designed to meet the unique needs of a variety of industries. Our success is built on a commitment to quality craftsmanship, innovative solutions, and exceptional customer service. As we continue to expand, we are seeking a dynamic and experienced leader to join our team and help drive our continued growth and excellence. Job Summary: We are seeking a canidate with experience, excellent communication skills, and proficiency in TurboCAD. This individual will oversee sales and estimating operations, create and review technical drawings, and ensure projects are accurately executed from concept through completion. Responsibilities: • Communicate directly with customers to understand project requirements and provide accurate quotes, • Prepare and review cost estimates, technical drawings, and related documentation, • Create or modify detailed TurboCAD drawings for customer approval and production, • Coordinate with production and engineering teams to ensure design accuracy and timely delivery, • Develop and maintain strong, long-term customer relationships, • Implement process improvements to enhance efficiency and profitability, • Track project progress and report on sales performance Qualifications: • Proven experience in sales, estimating, or manufacturing, • Proficient in TurboCAD (experience with other CAD software is a plus), • Strong communication, leadership, and organizational skills, • Background in enclosure manufacturing, sheet metal, or fabrication preferred, • Detail-oriented and able to manage multiple projects simultaneously, • Proficient in Microsoft Office (Excel, Word, Outlook), • Comfortable working in a fast-paced, growing company environment Required Experience: • 2+ years of hands-on experience creating and editing TurboCAD drawings, • Demonstrated success in customer communication, quoting, and project coordination Benefits: • Competitive pay (base + performance incentives), • Health and dental insurance, • Paid time off and holidays, • IBEW Local 3 Union, • Pension / Retirement Plan

Job Description Job Title: Press Brake Operator (3rd Shift) Location: Kearny, New Jersey Compensation: $49,920.00 to $56,160.00 Hours: 11pm-7:30am Responsibilities • Operate and program CNC Press Brake machines, primarily Amada, setting up machinery, and performing test runs on materials., • Use CAD programs, basic hand tools, measurement instruments, and fine measuring tools to ensure accurate production., • Inspect production parts for defects and ensure they meet quality standards., • Perform routine maintenance on machinery to maintain optimal operation., • Communicate with production leads to meet deadlines and follow production schedules., • Maintain a clean and safe work environment, adhering to safety, operational, and regulatory standards in collaboration with Quality and Environmental Departments. Requirements • High school diploma or equivalent required; post-high school education or training preferred., • At least one (1) year of manufacturing experience pressing, bending, or stamping metal., • Familiar with Press Brake programming and setup., • Ability to read and interpret 2D prints, 3D models, and work instructions., • Experience in sheet metal fabrication is required., • Willingness to work in a fast-paced manufacturing environment. System One, and its subsidiaries including Joulé and Mountain Ltd., are leaders in delivering outsourced services and workforce solutions across North America. We help clients get work done more efficiently and economically, without compromising quality. System One not only serves as a valued partner for our clients, but we offer eligible employees health and welfare benefits coverage options including medical, dental, vision, spending accounts, life insurance, voluntary plans, as well as participation in a 401(k) plan. System One is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender identity, age, national origin, disability, family care or medical leave status, genetic information, veteran status, marital status, or any other characteristic protected by applicable federal, state, or local law. Ref: #562-Joule Staffing - Edison

Job Description Commercial Sheet Metal Working Foreman $130,000–$160,000 Annual Earning Potential | $2,500 Sign-On Bonus | NYC Metro We are hiring an experienced Commercial Sheet Metal Working Foreman to lead a small field crew performing commercial ductwork, damper repairs, and mechanical retrofit work throughout the NYC metro area. This is an opportunity for an experienced foreman or lead mechanic who wants steady commercial work, strong earning potential, and a path into greater field leadership as the company grows. You do not need specialized fire/smoke damper experience. If you're strong with commercial ductwork, know how to lead a crew, and can solve problems in the field, we can train you on the specialized work. What You'll Do • Lead a crew of approximately 2–4 field employees, • Perform and oversee commercial ductwork and damper repairs, • Cut, modify, patch, and install ductwork, access doors, dampers, and transitions, • Coordinate materials, tools, and project requirements, • Train and mentor less-experienced technicians, • Communicate with facility personnel and company leadership, • Keep projects moving safely, professionally, and on schedule Most of the work is in hospitals and healthcare facilities, with additional university, school, and institutional projects. What We're Looking For • 5+ years of commercial ductwork or sheet metal experience, • Foreman, lead mechanic, or senior technician experience, • Strong hands-on ductwork knowledge, • Ability to lead while still working alongside your crew, • Professional communication and customer-facing skills, • Valid driver's license Fire/smoke damper, controls, BMS, air balancing, firestopping, and healthcare experience are strong pluses, but not required. Compensation & Benefits • $130,000–$160,000 annual earning potential, including available overtime, • $2,500 sign-on bonus after 6 months, • 401(k) with up to 4% company contribution, • Approximately 11 paid holidays, • Paid vacation and sick time, • Paid training and certifications, • Company-provided major tools and equipment, • Company vehicle or mileage/travel reimbursement depending on arrangement, • Company iPad, • Supplemental AFLAC benefits available Schedule & Travel Most projects are throughout New York City and the surrounding metro area. The normal schedule is approximately 8:00 AM–4:00 PM, with opportunities for additional earnings through evening, weekend, and other off-hours project work. There is no on-call requirement. Employees typically dispatch directly to the project rather than reporting to a shop every morning. Why This Opportunity? This is a growing operation with a strong pipeline of hospital and institutional work. You'll have direct access to leadership, significant responsibility in the field, and the opportunity to help shape how projects and crews are run. For the right person, this isn't just another mechanic position. We're looking for someone who can help build crews, develop younger technicians, take ownership of projects, and grow into a larger field leadership role. If you're an experienced commercial ductwork professional ready for more responsibility, stronger earning potential, and room to grow, apply today.

Job Description Travel Required: 30-mile radius from Westbury to Manhattan We are seeking an HVAC Sheetmetal Drafter to become part of our team! Our projects intersect many sectors from Leading Technology Firms/Hotels/Educational Campuses/Bio Labs/Multi-Family Housing/Commercial Industries/Finance Industry/Tenant Fit out and more...Employees gain a wealth of experience through drafting different projects and regularly interact with Design Professionals to gain project approval. Qualifications: • Proficiency in CAD, Navisworks, and other drafting tools, • Strong understanding of mechanical engineering principles and design standards, • Detail-oriented individual with strong analytical and problem-solving abilities, • Self-motivated and driven self-starter with high integrity, • Excellent communication, interpersonal, and commitment to getting the job completed with accuracy, • 6–10 years of relevant experience required Responsibilities: • Work with senior draftsmen, estimating team and project management team to understand the scope of work and installation intent to accurately design and produce shop drawings and as-built drawings, • Field Surveying Job Site to confirm dimensions, • Ensure compliance with benchmarks, ceiling heights and tolerances, • Flag conflicts on shop drawings that require architect/engineer review, • Ability to layout equipment and orientation of mechanical equipment as required, • Conduct thorough reviews of mechanical plans and drawings for accuracy, compliance, and feasibility, • Produce accurate shop drawings based on industry standard and norms, • Review and modify designs if mechanical plans presented are not achievable \nCompany Description Founded in 1992, ALL-CITY METAL, INC., is a leader in both sheet metal HVAC fabrication and installation, as well as the fabrication, manufacturing and installation of Trash Compactors, Trash Chutes, Linen Chutes and chute doors. We are a full service company that designs and manufactures our products onsite in the USA. We offer a variety of products including the above and related specialty items, accessories, hardware and components. Founded in 1992, ALL-CITY METAL, INC., is a leader in both sheet metal HVAC fabrication and installation, as well as the fabrication, manufacturing and installation of Trash Compactors, Trash Chutes, Linen Chutes and chute doors. We are a full service company that designs and manufactures our products onsite in the USA. We offer a variety of products including the above and related specialty items, accessories, hardware and components.

Job Description About Roanwell Roanwell designs and manufactures communication products for demanding applications, including headsets, handsets, cable assemblies, and electromechanical assemblies. Our work combines established product lines with new-product development in a high-mix, low-volume manufacturing environment. About the role We are seeking a hands-on Mechanical Engineer to support existing products and develop new mechanical designs from concept through production. You will work directly with Engineering, Operations, Quality, and suppliers to solve build problems, improve product reliability and manufacturability, and turn designs into accurate, repeatable manufacturing processes. The role includes regular work on the production floor and in prototype and test areas, with priorities balanced between production needs and development milestones. What you will do • Design and improve mechanical parts, acoustic housings, ruggedized enclosures, seals, and electromechanical assemblies using SolidWorks. Develop concepts, prototypes, detailed drawings, and production-ready designs., • Support existing products by resolving fit, tolerance, material, and assembly issues. Evaluate obsolete components, supplier changes, and replacement materials while maintaining product requirements., • Apply design for manufacturability and assembly, engineering calculations, material selection, and tolerance stack-up analysis to improve performance, reliability, and cost., • Work alongside production and Quality teams to investigate defects, troubleshoot build problems, and implement and verify corrective actions., • Design and support the procurement of assembly fixtures, inspection gages, tooling, and test fixtures that improve consistency and reduce assembly time and rework., • Create and maintain controlled CAD models, drawings, bills of materials, engineering changes, and assembly instructions. Support accurate manufacturing-system BOMs and routings as applicable., • Develop and execute mechanical and environmental verification plans with relevant specialists. Document results and support qualification testing against customer and product requirements., • Collaborate with suppliers on manufacturability, quotations, tooling, and component tolerances. Support Quality in first-article inspections and resolving discrepancies., • Coordinate mechanical interfaces with electrical and acoustic engineering resources. Track technical tasks, communicate risks, and carry changes through release and successful production implementation. Required qualifications • Bachelor’s degree in Mechanical Engineering, Manufacturing Engineering, or a related engineering discipline., • At least 3 years of relevant experience in mechanical design, prototype development, and manufacturing support, with examples of designs or improvements carried through to production., • Strong SolidWorks skills, including part modeling, assemblies, and detailed manufacturing drawings., • Working proficiency in geometric dimensioning and tolerancing (GD&T), ASME Y14.5 drawing practices, tolerance analysis, and engineering fundamentals., • Hands-on experience troubleshooting physical parts and assemblies, using appropriate measurement tools, and working directly with manufacturing teams., • Practical knowledge of manufacturing processes such as machining, injection molding, sheet metal fabrication, or additive manufacturing, and the ability to evaluate supplier capabilities., • Experience maintaining engineering documentation, BOMs, and revision control., • Ability to investigate problems systematically, manage competing priorities, and communicate clearly with production personnel, suppliers, and technical colleagues. Preferred qualifications • Experience with electro-acoustic products, communication equipment, ruggedized electronics, environmental seals, or precision electromechanical assemblies., • Experience designing assembly fixtures, inspection tools, or manufacturing tooling., • Familiarity with environmental qualification testing, including vibration, temperature, and ingress protection; MIL-STD-810 experience is useful., • Experience in defense, aerospace, or another controlled manufacturing environment, including AS9100 or ISO 9001 quality systems., • Experience with root cause analysis, corrective action, design or process FMEA, and first-article inspection support., • FEA experience and the ability to interpret simulation results alongside calculations and physical testing., • Familiarity with ERP/MRP and quality-management systems; MISys or UniPoint experience is helpful. You do not need every preferred qualification to apply. We value demonstrated engineering judgment, practical problem-solving, and the ability to deliver reliable results. What success looks like You will help production resolve engineering issues promptly, release accurate and usable documentation, reduce recurring defects and rework, and deliver agreed development milestones. Early priorities include learning our products and processes, taking ownership of assigned open issues, and completing a documented improvement or design release. \nCompany Description Roanwell Corporation is an OEM that designs and manufactures rugged acoustic communications equipment, emergency locator transmitters primarily, and cable assemblies for the commercial marine, aviation and defense markets. Roanwell Corporation is an OEM that designs and manufactures rugged acoustic communications equipment, emergency locator transmitters primarily, and cable assemblies for the commercial marine, aviation and defense markets.

Job Description We are looking to hire a Sheet Metal and Damper Repair Mechanic Helper to join our team! Your main responsibilities will be to assist lead installing various types of dampers including fire, smoke, and fire/smoke damper, installing duct access doors, and other various sheet metal modifications. Overview A Sheet Metal and Damper Repair Mechanic Helper is responsible for assisting the lead technician in completing inspections on, making repairs to, and installing new fire/smoke dampers in compliance with the National Fire Protection Agency (NPFA) NPFA 90A, NFPA 80, & NFPA 105 standards and in accordance with the Absolute Facilities Group (AFG) Training Methods and Procedures Manual. This position works in all aspects of fire, smoke, and combination dampers within mostly indoor climates, above ceilings, and inside ductwork, working on systems designed and tested as a component of the life safety assemblies. Most of the work takes place primarily in a healthcare setting such as hospitals, clinics, and nursing homes. Role and Responsibilities • MUST show up on time, follow safety and cleanliness protocols, and regulations per the jobsite foreman/manager., • Assist with and perform inspections and repairs on fire/smoke dampers in compliance with the NPFA 90A, NFPA 80, & NFPA 105 standards and in accordance with AFG’s Training Methods and Procedures Manual., • Installing new fire/smoke dampers, installing sheet metal access doors, and other ductwork related modifications., • Misc. maintenance work including minor masonry repairs, fire stopping, cleaning, etc., as needed., • Maintaining jobsite inventory of supplies, site tools and equipment., • Provide accurate and complete documentation of prior conditions and work performed for customer reporting using phone/tablet., • Maintain professional and timely communication with customers and AFG management. Job Requirements • Good verbal and written communication skills., • Must be self-motivated and possess the ability to perform work throughout a facility self-directed which includes communication with customers and staff., • Maintain a professional appearance which includes consistent on-time arrival at job sites., • Administer proper infectious control measures as per hospital requirements when performing inspections and repairs., • Demonstrate ability to read, follow, and label Life Safety Plans/Drawings., • Capable of aligning work schedule with the on-site need for tools and materials, which includes unloading and loading of these materials and tools, and any other necessary equipment., • Some knowledge of computer software preferred (Microsoft Word & Excel, Email, and Adobe Acrobat), • Efficient with smartphones, tablets, computers, and chosen applications for daily reporting., • 20% out-of-town travel required (30+ miles). Additional Requirements • Valid driver license with an acceptable driving record., • Preferred construction experience with basic tools. Physical Demands and Work Environment The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. • 8:00am – 4:00pm regular work hours at jobsites throughout NYC, • The employee is regularly required to stand; walk; sit; use hands to finger, handle, or feel objects, tools or controls; reach with hands and arms; climb stairs & ladders; balance; stoop, kneel, crouch or crawl; talk and hear., • Associate is required to spend 50% or more of inspection and repair time climbing and using various ladders to access dampers., • Specific vision abilities required by the job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus., • Must be able to lift and/or move up to 40 pounds independently., • Working extended hours which includes evenings and weekends (compensation provided)., • Paid Holidays & Paid Time Off (vacation, sick, personal), • 401k with Employer Matching up to 5%\nCompany Description We specialize in Operation, Inspections, Repairs, and Renovations of Healthcare Facilities in the NYC area. We specialize in Operation, Inspections, Repairs, and Renovations of Healthcare Facilities in the NYC area.

Job Summary Amfas International is looking for a senior manufacturing engineer to serve as the technical authority behind the products we build. Amfas supplies Cast, CNC Machined, Forged, Welded, MIM, Stamped, Plastic injection, and Assembled industrial components through a global supply base. We own a North American assembly and third-party logistics facility, and work with partner factories around the world. This role reviews customer designs, determines how parts should be made, guides tooling and fixture design, selects and suggests materials and processes, and sets the technical standard our supply base is expected to meet. This is a senior individual contributor role with no direct reports. Engineering team coordination and program scheduling stay with engineering management. This position exists to provide technical depth: walking shop floors at our facility and at suppliers, evaluating process capability, and leading root cause on difficult quality and process failures. It is also a customer liaison role, joining customer engineering calls, presenting findings, and visiting customer sites to keep Amfas aligned with what the customer needs. The position is remote in the United States or northern Mexico and travels 25 percent or more. Position Scope • Owns technical decisions: process selection and routing, tooling and fixture direction, material selection, and design for manufacturability judgment., • Provides technical evaluation when new suppliers are being considered. Finding sources and selecting suppliers stays with the sourcing and commercial team., • Technical mentor to Amfas engineers globally, with no supervisory responsibility. Program timelines and engineering team management stay with engineering management. Essential Duties and Responsibilities • Serve as the senior technical authority on manufacturing processes across machining, casting, fabrication, and assembly., • Review customer drawings, models, and specifications, provide design for manufacturability guidance, and set the manufacturing approach and process routing for new parts, including material selection, secondary operations, and finishing., • Design or direct the design of tooling, dies, molds, gauges, and fixtures, review supplier tooling proposals, and approve design changes, drawing revisions, and deviation requests., • Provide technical review on new quotes, confirming parts can be produced as priced and identifying cost drivers, tolerance risk, and process alternatives., • Evaluate prospective and current suppliers on equipment, process capability, tooling practice, and engineering competence, and visit plants to verify parts are built to the agreed method., • Lead root cause analysis and corrective action on complex quality and process failures, and support APQP and PPAP activity including process flow, FMEA, control plans, and capability studies., • Act as the senior technical contact for customer engineering teams, and translate customer requirements into clear manufacturing requirements for the supply base., • Mentor Amfas engineering staff globally and maintain internal technical standards. Requirements · Bachelor’s degree in Mechanical, Manufacturing, or Industrial Engineering, or equivalent, plus 15 or more years of manufacturing engineering experience with substantial production floor exposure · Deep process knowledge across CNC machining and turning, metal casting (die, investment, or sand), sheet metal and weld fabrication, and mechanical assembly · Tooling, die, and fixture design experience highly desirable · Strong materials knowledge across brass and copper alloys, steels, stainless, and aluminum, plus heat treatment, plating, and surface finishing · Fluent in engineering drawings, GD&T, and tolerance stack up, and proficient in 3D CAD · Working knowledge of APQP, PPAP, FMEA, control plans, and ISO 9001 · Excellent written and spoken English, with the presence to represent Amfas in front of customer engineering and executive teams · Based in the United States or northern Mexico, able to travel 25 percent or more including international travel Preferred Qualifications · Experience at a contract manufacturer, job shop, foundry, or die caster · Experience qualifying or developing suppliers in Asia, particularly China and India · Conversational Spanish, and familiarity with USMCA and IMMEX manufacturing in Mexico is a plus · CAM, CMM programming, or metrology experience · Experience serving security hardware, plumbing, appliance, automotive, or industrial equipment customers

We are seeking a Design Engineer to join a reputable company in the Des Moines IA metro! The ideal candidate will be responsible for executing design process from ideation to production. You will draw new designs and update our current designs. During the creation process, you will ensure that our designs meeting all necessary design responsibilities. Location: Pella, IA Role Type: Long Term Contract Rate: 28-38/hr W2 - The rate may be negotiable based on experience, education, geographic location, and other factors. Responsibilities • Draw, update, and maintain designs, • Manage multiple complex projects at the same time, • Ensure our designs meet manufacturing, technical and customer Responsibilities, • Ensure that all design projects are completed within budget and time Qualifications • Bachelor's Degree or equivalent experience in Mechanical Engineering or relevant technical degree - mechanical, manufacturing engineer, aerospace engineer, Industrial engineer., • Solidworks, Hydraulics, Structures, FEA, GD&T, Sheet Metal, Print Creation and Print Reading (Weld and Part), ECN Process, • CAD experience, • Strong organizational and communication skills If you are interested in this opening, then please click APPLY NOW. For other opportunities available at Akkodis go to www.akkodis.com. If you have questions about the position, please contact (insert recruiter name) at (insert recruiter phone number) or (insert recruiter email). Equal Opportunity Employer/Veterans/Disabled Benefit offerings available for our associates include medical, dental, vision, life insurance, short-term disability, additional voluntary benefits, EAP program, commuter benefits and a 401K plan. Our benefit offerings provide employees the flexibility to choose the type of coverage that meets their individual needs. In addition, our associates may be eligible for paid leave including Paid Sick Leave or any other paid leave required by Federal, State, or local law, as well as Holiday pay where applicable. To read our Candidate Privacy Information Statement, which explains how we will use your information, please visit https://www.modis.com/en-us/candidate-privacy/ 8/3/2023 The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: • The California Fair Chance Act, • Los Angeles City Fair Chance Ordinance, • Los Angeles County Fair Chance Ordinance for Employers, • San Francisco Fair Chance Ordinance The below disclaimer is a new requirement for any job postings IF hiring restrictions are imposed AND where the candidate will be remote, OR where the candidate will work in Unincorporated LA County. Your Akkodis Ops Compliance Team will provide the appropriate required language for your job posting. IMPORTANT: To comply with the LOS ANGELES COUNTY FAIR CHANCE LAW, any job postings that are REMOTE or where the candidate will work in Los Angeles County, must include language related to local, state, or federal laws or industry specific regulations, if applicable. Please contact your Akkodis Ops Compliance Team for direction before posting. The following local, state, or federal laws or regulations impose restrictions or prohibit the hiring of individuals with specified criminal history for this position:

We're looking for motivated individuals to join our team at LKQ Corporation. With opportunities for growth, competitive benefits, and a supportive work environment, LKQ is the place to be. Apply now and take the first step toward a rewarding career! Starting at $20+ per hr. Monday - Friday, 8am-4:30pm (No Weekends) Excellent Benefits Package: Includes Health Benefits, PTO, Paid Holidays, and Employer contributed 401k, just to list a few. The Parts Puller is responsible for performing day-to-day activities of the Production Yard or Warehouse in accordance with current federal, state/provincial, and local standards, guidelines, and regulations governing this facility. This position may be directed by the Production/Yard Leader to assure that the parts are handled in a safe, efficient, and proper manner. • Safely maneuver around the yard or warehouse., • Find/Retrieve parts., • Package parts for delivery/or prepping, • Any paperwork involved with the parts., • Pull work orders., • Use hand tools and power tools to remove parts from cars., • Operate a powered industrial truck (forklift) or order picker., • Pull and prep all sheet metal and other orders., • Tag all parts properly for the destination., • Communicate with Sales and Dispatch., • Must display a positive and friendly attitude as well as appropriate behavior during work hours., • Cleanliness must be maintained in the work area., • Assume other duties as assigned., • Not responsible for supervising employees. Education & Experience • High School Diploma/GED., • A working knowledge of automotive parts., • Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rates, ratios, and percentages and to draw and interpret graphs., • Frequent use of Outlook, Word, Excel, graphics, etc., • Basic messages communicated orally. May write brief messages and keep simple records. May explain and offer guidance on routine procedures., • Problems encountered are routine, somewhat repetitive, and generally solved by following clear directions and procedures., • Decisions generally affect own job or assigned functional area., • Results are defined and existing practices are used as guidelines for how to complete work activities; works closely with supervisor/manager who provides broad guidance and overall direction., • Prioritize assigned and routine tasks. Handle appropriately., • While performing the duties of this job, the employee is occasionally required to stand, walk, push, pull, squat, bend, reach, climb stairs, balance, stoop, kneel, crouch, or sit for extended periods., • The employee must occasionally lift and/or move up to 75 pounds. On occasions, an employee may be asked to lift and/or move up to 100 pounds., • The employee may be exposed to hazardous situations, conditions, and equipment. Must be able to work in cramped spaces or underneath vehicles that may require getting into awkward positions. May regularly wear personal protective equipment (PPE). May be exposed to extreme temperatures and high noise levels., • Travel may be required periodically, including overnight stays (contingent on position requirements). Benefits: • Health/Dental/Vision Insurance, • Paid Time Off, • Paid Parental Leave, • Fertility Coverage, • 401k with Generous Company Match, • Company Paid Life Insurance and Long-Term Disability, • Short-Term Disability, • Employee Assistance Program, • Tuition Reimbursement, • Employee Discounts, • PNC Daily Pay Option Join us for an exciting career journey with positive, driven individuals.

Mechanical Engineer – Modular R&D Location: Austin, TX Compensation: $170,000-$250,000 DOE Relocation: Comprehensive relocation assistance will be provided for non-locals. About the Opportunity We are supporting a rapidly scaling data center company that is hiring a Mechanical Engineer into its Modular R&D team. This business builds gigawatt-scale data centers in months rather than years, and that speed lives in the modular product. The data center is engineered as a manufactured unit rather than a construction project, and this role sits right at the center of that. This is a hands-on product engineering role, not a consultancy design seat. You will take mechanical systems from concept through released drawings, first article and rate production, on a compressed schedule where the factory is building from your work the same month you release it. Key Responsibilities • Engineer the mechanical systems of the modular product: cooling, piping and airflow from concept through to released drawings, • Own the liquid cooling loops, pumps and heat rejection design that the modular product's density depends on, • Solve the integration problems where mechanical meets structural and electrical: routing, interfaces and tolerances where the disciplines collide, • Support the factory and the field, answering mechanical RFIs same-day and engineering fixes into the next revision, • Prototype and validate: mockups, fit checks and first-article reviews you attend in person, • Take designs from concept to the manufacturing line in weeks rather than months, • Design repeatability in from the start so drawings, tolerances and BOMs hold up under rate manufacturing What We're Looking For • Hands-on mechanical engineering experience on complex physical products or modular construction, • Experience designing cooling, piping and airflow systems from concept through to released drawings, • Ability to produce drawing packages that build clean, with the instinct to fix the drawing rather than the workaround when a fabricator does call, • Experience working across mechanical, structural and electrical interfaces, including routing, tolerances and integration points where the disciplines collide, • Experience supporting production launches of your own designs through first article and into rate manufacturing, • Strong understanding of how engineering decisions affect manufacturability, repeatability and cost at volume, • A practical, hands-on engineering mindset with a willingness to attend mockups, fit checks and first-article reviews in person, • Ability to iterate quickly without losing configuration control, • Comfortable working in a fast-moving environment where decisions often need to be made quickly, • Strong communication skills, with the ability to turn factory and field questions around the same day, • A collaborative approach to problem solving rather than throwing issues over the wall to the next discipline The above is a starting point rather than a checklist. If you do not fit the role exactly but can point to where you would, that is worth a conversation. Preferred Experience Experience in one or more of the following would be particularly valuable: • Liquid cooling depth, • Sheet metal and piping design, • 3D CAD mastery (SolidWorks, Inventor or Revit), • Design for Manufacturing instincts, • Modular or prefabricated manufacturing, • New product introduction and first-article builds, • Data center infrastructure, • High-growth or startup environments The Human This role is best suited to an engineer who wants to see their designs become physical products. You should enjoy being close to production, talking directly with the people building the product and solving problems as they happen rather than reviewing them weeks later from behind a desk. You do not need to have come from a data center background. What matters is that you understand your technical area, can work effectively in a manufacturing environment and are comfortable taking ownership of problems from identification through resolution. The environment is fast-paced, highly ambitious and execution-focused. The successful candidate will play a critical role in turning engineering intent into a manufactured product as the operation scales.

SHIFT: Friday - Tuesday 11:00PM - 7:30AM (Starts Friday @ 11:00PM) Primarily responsible for hands-on maintenance of HVAC systems and related auxiliary equipment. Required Education: High School diploma. Preferred Education: Some college education in engineering and/or a completion certificate from a recognized trade school; familiarity with PC. Required Experience: 3 years mechanical maintenance experience with absorption/freon A/C equipment and stream/related heating systems. Required Skills, Knowledge and Abilities: Strong knowledge/skills in mechanical systems; intermediate knowledge/skills in electrical and plumbing systems; working knowledge/skills of refrigeration cycle, common parts, pneumatic/electric/electronic control systems; basic knowledge/skills in brazing, soldering, insulation, measuring, carpentry and sheet metal; basic knowledge of safety standards/regulation, current CFC regulation, physics and math; ability to read blueprints, schematics, wiring diagrams and nameplates; good communication skills; ability to follow written and verbal instructions; New York City Refrigeration Engineer's license and EPA-CFC Universal certification. In compliance with NYC's Pay Transparency Act, the hourly rate for this position is USD $52.688. This rate is based on bargaining unit contracts. This pay range represents base pay only and excludes any additional items such as incentives, bonuses, clinical compensation, or other items. NYU aims to be among the greenest urban campuses in the country and carbon neutral by 2040. NYU is an Equal Opportunity Employer and is committed to a policy of equal treatment and opportunity in every aspect of its recruitment and hiring process without regard to age, alienage, caregiver status, childbirth, citizenship status, color, creed, disability, domestic violence victim status, ethnicity, familial status, gender and/or gender identity or expression, marital status, military status, national origin, parental status, partnership status, predisposing genetic characteristics, pregnancy, race, religion, reproductive health decision making, sex, sexual orientation, unemployment status, veteran status, or any other legally protected basis. All interested persons are encouraged to apply at all levels.

Required Skills & Experience -Minimum 5 years of NC programming experience for turret punch presses and laser cutting machines within a sheet metal fabrication environment. Ability to read and interpret engineering drawings and specifications. Preferred Skills & Experience -Experience with S

Dyna-Vac Equipment is Hiring Welder/Fabricators and Assembly Techs in Stittsville, NY!Will accept trainees!Assembly TechJob Description: Mechanic tech with knowledge in Hydraulic Systems, Mechanical Pump Drives and Equipment Assembly. Strong Mechanical background is mandatory. You will be working in the assembly of various vacuum pumping machines that incorporate Hydraulic and hydrostatic systems, pumps and motors, mechanical drives, PTO systems and more... Must be able to follow directions and be a team player. Salary depends on experience. Job is: Full Time Work Hours 6am-4:30pm Please check normal work days Monday, Tuesday, Wednesday, Thursday Number of Years of Education Needed? 12 Specialized education required? No Years of Experience Required 2 Will you accept related experience? Yes Will you accept a trainee? Yes Are you interested in On-The-Job Training? Yes Are you interested in an Apprenticeship? Yes Are you on a public transportation route? No Is a driver's license required? Yes Salary Range $18-22/hourIs salary negotiable? Yes Health Insurance? Yes Dental Insurance? Yes Paid Vacation? Yes Sick Leave? Yes Paid Holidays? Yes Retirement Plan? YesWelder/FabricatorJob Description Dyna-Vac Equipment is Hiring... We need an experienced Welder/Fabricator. Experience with MIG Welding, Working with Structural Steel, Plate and Sheet Metal, Must be Creative, Dependable and a Team Player... Apply in person or send a resume 8963 State Route 365, Stittville NY 13469 Salary dependent on experience, Call for an appointment 315-865-8084Great Opportunity for the right person....Duties include: Fit up and welding steel tanks up to 4000 gallons Shearing and bending steel sheet and plate Fabricating sub-frames and trailer frames Fabricating a wide variety of componentsCapabilities Must have a good knowledge of MIG weldingFamiliar with Steel Fabricating Equipment, Shears, Brakes, Saws, Etc. Good mechanical background Must be able to work from drawings Must be in good physical condition and capable of lifting up to 50lbs General math knowledge Must have good work ethicsShop Equipment you will be using... MIG and TIG Welders Press Brake, Shear, Plate Roll, Angle Roll Band Saw, Chop Saw Lathe, Milling Machine, Drill Press Plasma Table Huge assortment of hand toolsGreat opportunity for the right person. Job is: Full Time Work Hours 6am-4:40pm Please check normal work days Monday, Tuesday, Wednesday, Thursday Overtime? No Number of Years of Education Needed? 12 Specialized education required? No Years of Experience Required 2 Will you accept related experience? Yes Will you accept a trainee? Yes Are you interested in On-The-Job Training? Yes Are you interested in an Apprenticeship? Yes Are you on a public transportation route? No Is a driver's license required? Yes Salary Range 18-25/hour Pay Frequency Hourly Is salary negotiable? Yes Health Insurance? Yes Dental Insurance? Yes Paid Vacation? Yes Sick Leave? Yes Paid Holidays? Yes Retirement Plan? YesDescription of products or services: Vacuum Pumping and Sewer Cleaning Machines

*THIS POSITION IS REQUIRED TO BE IN OUR LAS VEGAS, NV OFFICE 5X PER WEEK, WE ARE NOT ABLE TO OFFER FULL REMOTE TO OUT OF STATE CANDIDATES* About the Company Right from the start, American Locker has continually led the industry we invented with an unstoppable series of innovative solutions - like inventing the first coin-operated locker. Our years of innovative American manufacturing have led us to create the widest range of customized solutions in the industry. Our smart locker systems are built to satisfy any solution with maximum security; intelligent key-less lockers that accept credit cards, charge laptops, send text messages, and more. We’re seeking a Manufacturing Engineering Manager to provide leadership for the American Locker manufacturing business and be accountable for overall operational and financial performance. In this role, you will lead manufacturing readiness activities for products moving from prototype through production, manage production releases and execution, rapid prototyping and new product introduction lead the way for continuous improvement and operational efficiency. Manufacturing Engineering & Production Readiness • Lead manufacturing readiness activities for products moving from prototype through production, • Develop and maintain routing, work instructions, and labor standards, • Ensure BOMs, drawings, and specifications are complete and ready for production, • Coordinate first-article builds and production launches, • Partner with Product/Design Engineering and Operations to resolve manufacturability issues, • Identify and address engineering gaps that create production delays, rework, or inefficiencies Production Release & Execution • Support the release of work orders into production systems such as MIE Trak, • Ensure jobs have the engineering information and documentation needed for successful execution, • Troubleshoot manufacturing engineering issues affecting production, • Improve consistency in how work moves from order to instruction to build, • Partner with Operations to address production constraints and recurring issues Rapid Prototyping & New Product Introduction • Lead manufacturing engineering activities for prototypes and new product introductions, • Provide hands-on support for prototyping, particularly in sheet metal fabrication, • Translate product concepts and designs into practical manufacturing processes, • Develop repeatable processes for moving new products into production, • Identify manufacturability risks early and work cross-functionally to resolve them Continuous Improvement & Operational Efficiency • Lead and support Lean and Six Sigma improvement initiatives within manufacturing, • Analyze labor, cycle times, workflow, and production constraints, • Improve cell layouts, material flow, ergonomics, and standard work, • Identify opportunities to reduce scrap, rework, and non-value-added labor, • Partner with Operations on Kaizen events and continuous improvement activities, • Track results and ensure improvements are sustained Engineering Change & Quality • Manage the Engineering Change Order (ECO) process within manufacturing, • Ensure engineering changes are communicated and implemented effectively on the production floor, • Lead or participate in root cause analysis for engineering-related defects, • Develop and implement corrective actions in partnership with Quality and Operations, • Support ISO requirements and quality system compliance, • Identify recurring issues and help drive permanent solutions Leadership & Team Development • Lead and develop a small manufacturing engineering team, currently consisting of two direct reports, • Set clear priorities, expectations, and accountability for the team, • Assign and manage day-to-day manufacturing engineering work, • Coach and develop team members while building stronger technical capability, • Establish practical processes and structure where additional clarity or consistency is needed, • Escalate significant risks, resource needs, and priorities to manufacturing leadership What Success Looks Like • Manufacturing processes are clearly documented, repeatable, and increasingly scalable, • Production disruptions caused by engineering gaps are reduced, • New products transition successfully from prototype to production, • Routings, work instructions, BOMs, drawings, and labor standards are accurate and maintained, • Improvements in efficiency, throughput, scrap, rework, and quality can be demonstrated, • Engineering changes are implemented consistently and timely, • Manufacturing Engineering, Operations, Quality, and Product/Design Engineering work effectively together, • The manufacturing engineering team has clear priorities and accountability Key Metrics • Labor variance vs. standard, • Scrap and rework, • Cycle time and throughput, • First-pass yield / first-article success, • ECO cycle time, • Repeat defects and corrective action effectiveness, • Production disruptions attributable to engineering issues AT A MINIMUM, YOU SHOULD HAVE • 5+ years of manufacturing engineering experience, • Previous experience leading or managing manufacturing engineering employees or technical teams, • 3+ years of hands-on sheet metal manufacturing experience, • Experience with rapid prototyping and new product introduction (NPI), • Experience developing routings, work instructions, and labor standards, • Working knowledge of BOMs, drawings, specifications, and engineering change processes, • Strong background in Lean Manufacturing and/or Six Sigma, • Demonstrated experience solving manufacturing and production problems cross-functionally, • Experience working in or improving an established manufacturing environment Leadership & Mindset • Hands-on leader who is comfortable working directly with the team and on the manufacturing floor, • Takes ownership and follows issues through to resolution, • Comfortable working in an environment where processes continue to evolve, • Able to establish structure and improve processes without overcomplicating them, • Uses data and practical problem-solving to make decisions, • Collaborates effectively across Engineering, Operations, and Quality, • Willing to ask for support and escalate issues when appropriate, • Motivated by continuous improvement and helping modernize manufacturing operations Benefits We’ve got you covered. From 401k with matching, generous PTO, And excellent medical, dental, and vision - we’re there for you! • You’ll have opportunities to advance. We’re fans of helping our employees learn different aspects of the business, be challenged with new tasks, mentored, and grow., • We celebrate one another's differences and ideas. We're proud of our culture of diversity and inclusion - and, we have programs that bring us together on important issues and provide educational opportunities for all employees, • A generous benefits package (Medical, Vision, Dental), • 401K with employer match, • Accrued Paid Time Off, • The pay range for this role is $115,000 - $125,000 per year, depending on experience, skills, and location. This range reflects what we believe in good faith we'd pay for this position at the time of posting, and final offers may vary based on qualifications and business needs. Equal Opportunity Employer Luxer One is an Equal Opportunity Employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, veteran status, or any other legally protected status.

Working knowledge of plumbing, piping, HVAC, and sheet metal trades and field installation methods. MissionHires is seeking a detail-oriented Plumbing or Sheet Metal Detailer on behalf of a construction company. Create shop drawings for plumbing, piping, HVAC, and/or sheet metal systems on construct

TECHNICAL SALES ENGINEER / REGIONAL SALES MANAGER Industrial Surface Inspection Systems ABOUT WINTRISS ENGINEERING Wintriss Engineering Corporation develops advanced automated surface inspection systems for industrial manufacturing. Our Web Ranger™ systems help manufacturers across plastic films, nonwovens, coated and laminated materials, composites and prepregs, metal foils and coil, paper, and other continuous web and sheet processes detect defects, cut scrap and yield losses, and optimize production. We're hiring a Technical Sales Engineer / Regional Sales Manager to grow an assigned territory by combining technical depth, consultative selling, and proactive business development. THE OPPORTUNITY This is a hunting role, not a catalog-sales or pure account-management position. You'll prospect for new accounts, open doors with technical and management decision-makers, and create opportunities in target industries — while also expanding relationships with existing Wintriss customers. Day to day, that means walking a production line with a process engineer, discussing defect-detection needs with a quality manager, reviewing automation requirements with controls engineers, and presenting the financial and operational case for a solution to plant and corporate leadership. You'll work directly with Wintriss engineering and applications teams to turn what you learn on the floor into an engineered inspection solution. KEY RESPONSIBILITIES • Prospect for and develop new business within your territory and target industries, identifying manufacturers and facilities that are strong candidates for automated surface inspection., • Build a pipeline through direct outreach, referrals, industry networking, trade shows, and targeted account development., • Manage and grow existing customer relationships, spotting opportunities for new systems, upgrades, expansions, and additional production lines., • Develop relationships with plant, engineering, quality, operations, and corporate decision-makers., • Conduct plant visits and production-line evaluations to understand processes and inspection requirements — defect types, specs, line speeds, web widths, resolution, and quality objectives., • Partner with Wintriss engineering, applications, service, and project teams to shape technically appropriate solutions., • Present technical solutions and business value to engineering, quality, operations, purchasing, and executive stakeholders., • Prepare, present, negotiate, and follow through on proposals, managing opportunities from prospecting through order., • Maintain an accurate pipeline, activity history, and forecast., • Represent Wintriss at trade shows, conferences, and industry events., • Track competitive technologies and emerging applications in automated surface inspection. WHAT WE'RE LOOKING FOR A technically capable, business-development-oriented sales professional experienced selling engineered solutions into industrial manufacturing — someone who can hunt for new business, not just manage an existing book. Relevant backgrounds: • Automated surface inspection or machine vision systems, • Industrial cameras, lighting, optics, or image-processing technology, • Industrial automation and controls, • Capital equipment or manufacturing process equipment, • Industrial quality-control or process-monitoring systems Direct experience with automated surface inspection systems is a strong plus, but not required for a candidate with strong industrial technical-sales and new-business-development experience. You'll also stand out with: • A track record prospecting for, developing, and closing new accounts — building and running a pipeline independently rather than relying on inbound leads., • Success growing existing accounts by uncovering additional applications across lines or facilities., • Comfort with technically complex, longer sales cycles for engineered solutions., • Ability to read specs, drawings, and layouts, and translate customer requirements into technical solutions., • Strong presentation, negotiation, and relationship-building skills across technical and executive audiences., • Working knowledge of industrial cameras, lighting, optics, controls, networking, PLCs, or automation systems., • Self-motivated and organized, comfortable managing a territory independently across multiple simultaneous opportunities. MANUFACTURING EXPERIENCE Experience with continuous web, sheet, or coil manufacturing processes is especially valuable, including: • Plastic film extrusion and converting, • Nonwovens, • Coating and laminating, • Battery separator and functional films, • Composites and prepregs, • Copper and aluminum foil, • Aluminum coil processing and coating, • Paper and paperboard, • Other continuous web, sheet, or coil-processing applications EDUCATION Bachelor's degree in Engineering, Electrical Engineering, Industrial Technology, Automation, Manufacturing, Business, or a related field preferred but not required. Significant relevant industry experience — particularly in surface inspection, machine vision, industrial automation, capital equipment, or continuous-process manufacturing — may substitute for formal education. TERRITORY & TRAVEL You'll develop and manage an assigned territory in the U.S. and/or Canada, covering both established Wintriss customers and significant new-business development opportunities. You're expected to actively expand the customer base in your territory rather than relying solely on existing accounts. Specific assignment depends on your location, industry experience, and existing customer relationships. Expect 50–70% travel for plant visits, production-line evaluations, technical and commercial meetings, proposal reviews, new-business development, and industry events. You should be comfortable working in active industrial manufacturing environments. COMPENSATION & BENEFITS A competitive package designed to reward both new-business development and long-term account growth, based on your technical background, industry knowledge, sales experience, and customer relationships. Includes: • Competitive base salary, • Performance-based sales commission, • Company-paid business travel expenses and mileage reimbursement, • Cell phone and business technology support, • Health and other employee benefits, • Paid vacation and holidays, • Company retirement programs, where applicable WHY WINTRISS ENGINEERING This role puts you at the intersection of technology, manufacturing, and business development, selling sophisticated engineered systems that directly affect a manufacturer's product quality, yield, productivity, and profitability. You'll act as a technical resource and trusted advisor rather than simply an equipment vendor — walking the line with a process engineer one day, discussing defect-detection requirements with a quality manager, and presenting ROI to plant or corporate management the next. If you enjoy technology, manufacturing, prospecting, problem-solving, and customer interaction, this role offers the opportunity to build a territory, develop long-term customer relationships, and have a direct impact on both Wintriss Engineering's growth and your own earning potential.

CAD Software: 3DX, CATIA V5/V6 Primary / Secondary Structural Design experience including sheet metal, machined and composite parts Experience with GD&T preferred Aerospace experience preferred Experience with ENOVIA LCA a plus Experience with additional CAD programs (UG NX, PTC CREO, SolidWorks) a

Is this the role you are looking for If so read on for more details, and make sure to apply today.AP100 & Amada Equipment Join a leading manufacturing organization where your expertise in sheet metal programming directly impacts production efficiency, quality, and innovation.This is an excellent opp

As one of the state's top roofing contractors, we have a well-established, continuously growing full service commercial roofing company, including sheet metal. We are seeking an experienced assertive, dynamic, ambitious Commercial Roofing Estimator who can continue our long tradition of successful r

Job Description Architectural Grille, a Division of Giumenta Corporation, located at 42 Second Avenue, Brooklyn, NY, 11215 is a family-owned and operated manufacturing company that has been in business since 1945. We are currently seeking to add a member to our growing team. The main responsibility will be to assist in reading plans to identify where we are specified. Create quotes and follow up with clients for status via phone, email, and in person. Client Relationship/ Estimating Duties/Responsibilities: • Prepare Quotes for clientele., • Follow up with clientele via phone on the quote and project status., • Visit local clientele when applicable., • Track and document quote status in Salesforce, • Read and fully understand project drawings, and blueprints to locate where our product is called out for estimating purposes., • Create take off’s / grille schedules to be utilized by the estimating department or to be prepared by this employee to create estimates., • Experience with Auto-cad a plus, • Additional duties may be assigned to meet business needs. Qualifications/Requirements: • Ability to read blueprints and do take-offs required., • Estimating the experience needed, • CAD software & PC usage, • Dodge experience is a plus but not required., • Salesforce experience is a plus but not required., • Sheet metal knowledge/experience is a plus but not required., • Able to work with mathematical and structural concepts., • Able to solve practical problems and interpret a variety of instructions furnished in written, oral diagram or schedule form., • Neat and organized., • Ability to work in a team atmosphere., • Ability to communicate in a clear and concise manner to achieve the intended objective.

Overview The Sheet Metal Engineering Program Manager serves as a key member of the engineering team and is responsible for leading the successful execution of new and existing sheet metal products throughout the entire manufacturing lifecycle. The role is responsible for managing program schedules,

Job Description The Switchboard Engineer II is responsible for Designing Low Voltage Switchboards and Panelboards. This role requires great attention to detail with a preference for self-starting mentality. All products must be designed using applicable safety standards & regulations (National Electric Code, Underwriters, Laboratories, etc). The Engineer will also be responsible for mentoring and leading other team members as needed. Primary Job Responsibilities: • Design 3D sheet metal parts with flat patterns, • Complete 3D Assemblies (150+ Item BOM), • Follow design life cycle states and design standards, • Create wiring diagrams using PLCs, breaker accessories, relays, contractors, power supplies, etc., • Create and understand 2D Front View, One-Line/Single-Line and Layout drawings using CAD Software, • Ensure clear communication between Engineering, Manufacturing and other key stakeholders., • Work in a team environment to analyze requirements from clients and develop design solutions, • Ensure clear communication with suppliers/vendors on an as-needed basis Qualifications / Experience: • Bachelors of Science degree in Mechanical or Electrical Engineering or similar, • 4 - 8 years of professional experience (working for UL891 OEM or Equivalent), • Proficiency in 2D and 3D CAD software (Autodesk Suite preferred), • Proficient with Microsoft Office Products, • Excellent Oral & Written Communication Skills Preferred Qualifications: • Experience with UL891, UL67, UL508A or UL1558, • Experience reading/understanding National Electric Code, • Experience sizing conductors and OCPDs, • Experience with Control Circuits and Logic Who are we: Raycap Inc. creates products that protect and support the world’s most valuable assets. We design and support advanced solutions for telecommunications, industrial, renewable energy, transportation, defense and other applications worldwide. We offer: • A competitive benefit package, • Paid Time Off, • 10 company paid holidays, • Tuition Reimbursement, • A generous 401(k) employer contribution Raycap is an Equal Opportunity / Affirmative Action Employer. All qualified applicants receive consideration for employment without regard to age, disability, race, color, national origin, sex, marital status, sexual orientation, gender identity, religion, creed, veteran or military status, or other protected status. We participate in E-verify for all employment verifications. Drug-free workplace.

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives you th

Want to be your own boss? With the Spark Driver™ app, you can make some extra cash by shopping and delivering for customers of Walmart and other local businesses.Available in more than 3,650 cities and all 50 states, the Spark Driver platform makes it possible for you to reach thousands of custome

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives you th

Want to be your own boss? With the Spark Driver™ app, you can make some extra cash by shopping and delivering for customers of Walmart and other local businesses.Available in more than 3,650 cities and all 50 states, the Spark Driver platform makes it possible for you to reach thousands of custome