Trabajos simulation engineer en Bay Shore, New YorkCrear alertas

Job Description Principal Electrical Engineer Responsibilities: • To take primary technical leadership in the design, management, and support for our motion control product lines:, • Synchro / Resolver to Digital converters, • DATEL A to D, and D to A converters, • Switched-mode multi-phase Brushless DC Motor (BLDC) drivers & controllers, • This role requires a deep understanding of analog / mixed signal circuit analysis and design techniques, to meet demanding dynamic range, EMI, noise and power specifications. The candidate should possess strong technical leadership, in order to drive our interdisciplinary Engineering team through all phases of product life cycle development- from requirements, architecture, and detailed design, through to design validation, device verification, qualification, including support for the handoffs to test and product manufacturing. Our product lines require continuous obsolescence review, with support for alternate part qualification or redesign, to help our military & aerospace customers manage the product life cycle., • Extract clear requirements and specs from marketing inputs, customer documents & meetings., • Engage early with the customer, to guide requirements toward those that yield a more realizable, higher value product., • Distill large-scale designs down to their architectural elements, and develop unique, innovative analog & digital hardware solutions. Consider & pursue patent applications as differentiators to secure our competitive advantage., • Generate reports, present findings & provide continuous feedback to the team throughout the review process- good communication is essential., • Develop creative approaches that favorably optimize complex design tradeoffs for: product cost, performance, feature set, time to market, and technical risk., • Follow a defined design process, coordinating technical reviews with the associated disciplines to facilitate good DFM outcomes in terms of yields, cost and performance., • Manage support and verification activities (thermal, electrical stress, worst-case, FMEA, tolerance, aging, and EMI analyses, performance simulations, and design verification) to ensure all requirements are met for the intended application., • Develop project plans, budgets, schedules; identify the resources required to get from market requirement to product release. Identify risks and develop contingency plans to mitigate schedule / technical threats to the program., • Provide technical guidance, including material and labor cost estimates to support winning tactical business opportunities and proposals., • Mentor, coach, and train engineers to greater levels of technical and professional achievement., • Adopt and support legacy product lines, resolving new vendor materials / product issues as they arise., • Investigate new methods, processes, techniques, tools, components, and technologies that may lead to improvements in quality, timeliness, and efficiency., • Conduct in-depth technical interviews and make hiring recommendations to further build out a capable and talented technical Engineering team.Qualifying Experience:, • Bachelor’s degree in Electrical Engineering; Graduate Engineering degree preferred., • Deep bench of Analog Circuit design:, • Multiple A to D architectures (multi-pass SAR, Flash, Sigma Delta, Pipeline) and D to A (serial DACs, R2R, current steering, charge scaling)., • Low noise and high dynamic range techniques, sample acquisition and hold circuits, Bandgap references., • Oscillators, VCO’s, Op-amps, Switched Capacitor Circuits; Active Filters, single ended / common & differential mode circuits. PCB design techniques for low noise, low EMI, and high current., • Type 2 control loops as used in Synchro to digital converters; resolver to synchro transformers, phase / frequency control loops, stability analysis. Comfortable with analysis in both time & frequency domains., • Control theory and Matrix mathematics including Z domain transform for digital control; Clark and Park transform theory., • Sensors / detectors- inductive, Hall, optical, LVDT, Synchro / Resolvers and Encoders., • Proficient with CAD tools such as LT-Spice, P-Spice, OrCAD, Allegro and Pantheon., • Analog / mixed signal ASIC design and verification using Cadence, Synopsis, or Siemens tool suites a plus., • Power electronics / power management (Buck/Boost, LDO, Charge Pump, Inverters using MOSFET, IGBT, SiC and GaN devices)., • Motor control system simulation, • Space-level radiation hardened design for analog and digital circuits- rad lot testing, ionizing radiation, single event upset and total dose analysis regarding component selection., • High level understanding of thermal, electrical stress, worst case, FMEA, tolerance, aging, and design for low EMI.

Job Description Mission Critical … Join PDC and make a Difference For more than 50 years, Power Device Corporation (PDC) has been recognized as a world leader in the design and manufacture of high-reliability Connectivity, Power, and Control solutions for the Aerospace, Defense, and Space industries. Our dedication to supplying quality products, on-time delivery, and superior support, has contributed to the success of our customers and the critical missions they serve. To continue to meet our customer’s mission critical needs, PDC is seeking an Senior Electrical Engineer – Analog/Digital to join our respected and valued team. In this role, you will be responsible for supporting the Business Unit Team in designing, maintaining, and validating firmware for PDC’s industry-leading portfolio of Power Distribution, Power Generation and Motor Control products. Your expertise will be vital in providing technical support to customers, developing new product ideas, supporting product roadmaps and working with the Business Unit Team and Engineering Teams in responding to customer proposals. This role is 100% on-site in our Bohemia, NY office. The compensation range for this role is $120,000 to $160,000. This position requires a U.S Person or a person who can qualify for a department of state of commercial license. *We are not accepting applications from independent recruiters or agencies at this time for this role; should this change the posting will be updated to reflect submission information. Job Qualifications - Education/Experience • Bachelor’s degree in Electrical Engineering is required. Graduate degree desirable., • Seven (7) to ten (10) years of experience in Analog and Digital Circuit design, which includes analog to digital conversion, processor/microcontroller, I/O communications and discrete I/Os., • Experience in power electronics design, thermal analysis, electrical stress analysis, worst case analysis, FMEA analysis, tolerance analysis, aging analysis and EMI analysis., • Experience with Power devices Mosfet, IGBT, SiC and GaN., • Familiarity with MIL-STD-1275/704 and DO-160 DC and AC input power specifications, familiarity with DC/DC converters., • Experienced in PWB layout techniques for determining current density requirements and voltage breakdown requirements in power distribution systems. Layout techniques for passing MIL-STD-461 and DO-160 EMI requirements., • Familiarity with multiple communication protocols including CAN, RS232/422/485, SPI, JTAG, PCI, PCIe, 1G/10G Ethernet., • Experience in space level radiation hardness, ionizing radiation, single event upset and total dose analysis for component selection, • Experience with CAD tools such as LT-Spice, P-Spice, OrCAD, Mozaix, Allegro and Pantheon are desirable, • Experience with Motor control simulation including Matlab Simulink or equivalent., • Control theory and Matrix mathematics including Z domain transform for digital control., • A/D conversion and sensor knowledge including LVDT, Resolvers and Encoders., • Clark and Park transform theory Primary/Essential Duties: • Provide technical leadership to lead engineering projects/team through all phases of the product life cycle from requirements, conceptual development and detail design, verification through qualification, manufacturing transition and production support., • Develop clearly written requirements and design specifications from a marketing or customer requirement document., • Perform original and innovative analog and digital hardware design and distill large scale designs into architectural elements. Generate design reports and present findings to the team – e.g., at design reviews. Facilitate the design of products by coordinating engineering teams of varied technical disciplines through clearly documented design documents. Co-ordinate technical meetings and reviews with other groups., • Develop creative approaches that favorably optimize complex design tradeoffs for various elements of a design such as product cost, performance, feature set, time to market, and technical risk., • Conceive methods for achieving product requirements and specifications using appropriate circuit design, process, manufacturing and mechanical techniques. Anticipate possible difficulties and develop alternate methods., • Perform thermal analysis, electrical stress analysis, worst case analysis, FMEA analysis, tolerance analysis, aging analysis, EMI analysis, simulations, and design verification to ensure that the designs meet the requirements of harsh environments for the applications., • Develop plans, budgets, schedules, and identify resources required to develop products from market requirement through product release. Identify risk areas and develop contingency plans to eliminate or mitigate risk that could result in schedule delays or failure to meet specification or design plan requirements., • Mentor, coach, and train engineers to facilitate their ability to progress to higher levels of technical and professional achievement., • Contribute technical input to proposals, as well as material and labor cost estimates in support of winning tactical business opportunities and proposals., • Provide support for new and legacy products by investigating and resolving issues using tools such as Oscilloscope, Analyzers, DMM, etc., • Work with other departments as appropriate to lead vendor or engineering outsource selection decisions based on uniform technical performance, risk and cost tradeoffs., • Take the initiative to research, develop, propose, evaluate and/or implement new methods, processes, techniques, tools, components, or technology that improve quality, timeliness and/or performance of DDC’s products or the efficiency or cost effectiveness of DDC’s engineering work., • Conduct in-depth technical interviews and make assessments and recommendations that support the hiring of capable and talented technical staff in Engineering Power Device Corporation provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.

Job Description iRocket is developing fully autonomous, fully reusable small launch vehicles to provide responsive, cost-effective access to space. Our mission is to catalyze a new era of space exploration through innovation in propulsion, structures, and sustainable launch systems. The Role: We are seeking a Mechanical Engineer to contribute to the design, development, and transition of mechanical components and systems from development through production. You’ll partner with propulsion, manufacturing, integration, and test teams to help deliver high-performance, reliable rocket hardware. • Act as Responsible Engineer for key subsystems or components (e.g., valves, mechanical assemblies), • Advance design of parts and assemblies: create CAD models, drawings, and associated documentation, • Perform mechanical analyses, calculations, and design iterations to meet performance, mass, and reliability targets, • Collaborate with manufacturing teams to ensure designs are manufacturable, and iterate designs based on feedback, • Support fabrication, post-processing, inspection, and tolerance verification of parts, • Assist with integration, assembly, and test of mechanical and propulsion subsystems, • Create schematics, document design and manufacturing processes, and maintain records, • Participate in test campaigns, support troubleshooting, and analyze results, • Communicate progress, issues, and tradeoffs clearly across cross-functional teams, • Ensure safe practices and adherence to PPE and safety standards in lab, shop, and test areas Requirements • Bachelor’s degree in Mechanical Engineering or a related engineering discipline, • 3+ years of experience in mechanical design, development, fabrication, assembly, or test, • Proficiency in CAD, • Knowledge of GD&T, tolerance design, part and assembly drawings, • Strong problem solving, analytical thinking, and collaboration skills, • Excellent written and verbal communication skills, • Ability to manage multiple tasks in a fast-paced environment, • Experience in aerospace, propulsion, or high-reliability systems, • Hands-on engineering background (design to bench to manufacturing), • Experience with simulation or analysis tools (e.g. ANSYS, FEA), • Experience scripting or using tools such as MATLAB or Python, • Health Care Plan (Medical, Dental & Vision), • Retirement Plan (401k, IRA), • Life Insurance (Basic, Voluntary & AD&D), • Paid Time Off (Vacation, Sick & Public Holidays), • Family Leave (Maternity, Paternity), • Short Term & Long Term Disability, • Wellness Resources

Job DescriptionBenefits: • 401(k), • 401(k) matching, • Competitive salary, • Dental insurance, • Health insurance, • Paid time off, • Tuition assistance The RF Engineer applies principles of RF/Electrical Engineering to solve complex technical challenges in research, development, and manufacturing environments. The role focuses on the design, development, testing, and production of RF Power Amplifier devices and systems, providing solutions to both routine and complex engineering issues under general supervision. Key Responsibilities: • Evaluate and test RF circuits, systems, and modules to meet specifications; modify as needed to achieve performance goals, • Conduct Acceptance Test Procedures (ATPs) on complete RF Power Amplifier Systems, • Develop and prototype new RF power amplifier gain stages, ensuring compliance with high-performance specifications, • Collaborate with engineering and manufacturing teams to ensure accurate data transfer and process control during product transition to manufacturing, • Design and develop next-generation RF systems specifically tailored for defense and medical applications in the IMHZ-2GHZ range, • Provide technical support and coordination to facilitate product development, manufacturing, and the transition of new designs into production, • Assist in preparing technical bids and proposals; occasionally attend customer design reviews and field-testing activitiesQualifications: Education: • Bachelors degree in Electrical Engineering (BSEE), Mechanical Engineering, Applied Science, or equivalent experience without a degreeExperience:, • 35 years of experience in microwave/RF design and developmentTechnical Skills:, • Proficiency in RF/microwave design and PCB layout, • Hands-on experience with testing, tuning, and modifying RF circuits, • Familiarity with CAD and simulation tools (ADS, HFSS, AutoCAD, PADS is a plus), • Skilled in using RF test equipment such as network analyzers, spectrum analyzers, power meters, and oscilloscopesSpecialized Knowledge:, • Experience in high-power solid-state amplifier design, • Familiarity with both packaged surface mount components and bare die technologies, • Experience with circuits operating up to 2GHZPreferred Qualifications:, • Proven experience in designing high-power solid-state RF amplifiers, • Knowledge of advanced simulation tools and RF design techniques, • Willingness and ability to travel occasionally for customer support and field service

Job DescriptionSenior Electrical Engineer – Analog & Digital Circuit Design | Power Electronics Expert We are seeking an experienced Senior Electrical Engineer with deep expertise in analog and digital circuit design and power electronics to join our engineering team. This role offers the opportunity to provide technical leadership across the complete product lifecycle—from initial requirements and architecture through production and sustainment—while working on cutting-edge harsh-environment applications. If you're passionate about innovative hardware design and thrive in a collaborative, technically challenging environment, this position is for you. Key Responsibilities • Lead technical initiatives throughout the full product lifecycle, including requirements definition, architecture development, design qualification, production support, and long-term sustainment, • Design, analyze, simulate, and verify innovative analog and digital hardware circuits for demanding harsh-environment applications, • Develop comprehensive design documentation, technical requirements, and deliver presentations at critical design reviews, • Balance and optimize complex engineering tradeoffs involving performance specifications, cost constraints, project schedules, and risk management, • Provide hands-on troubleshooting, technical analysis, and engineering support for manufacturing operations, supplier relationships, and legacy product lines, • Mentor junior and mid-level engineers, contribute to business development proposals, prepare cost estimates, and participate in technical hiring decisionsRequired Qualifications, • Bachelor's degree in Electrical Engineering (Master's degree strongly preferred), • Minimum 7-10 years of professional experience in analog circuit design and digital circuit design, including expertise in A/D conversion, processors, microcontrollers, I/O interfaces, and communication systems, • Proven background in power electronics design using MOSFET, IGBT, SiC, and GaN semiconductor devices, • Hands-on experience with DC/DC converters and regulatory compliance including MIL-STD-1275, MIL-STD-704, DO-160, and MIL-STD-461, • Advanced knowledge of critical engineering analyses: thermal analysis, electrical stress analysis, worst-case circuit analysis, tolerance analysis, aging analysis, FMEA, EMI/EMC, and radiation effects (SEU, TID), • Demonstrated proficiency in printed wiring board (PWB) layout for high-power, high-voltage, and EMI-compliant circuit designs, • Strong understanding of communication protocols including CAN bus, RS-232/422/485, SPI, JTAG, PCI/PCIe, and 1G/10G Ethernet, • Experience with motor control systems, control theory, Z-domain analysis, Clark and Park transforms, and sensor interfaces (LVDT, resolvers, encoders), • Join a well-established, stable company with a proven track record of success and innovation, • Work on a diverse product portfolio serving multiple industries and customers across various sectors, • Engage with advanced technologies and tackle challenging engineering problems in harsh-environment applications, • Collaborate within a supportive, professional work environment that values technical excellence and continuous improvement, • Receive a comprehensive benefits package designed to support your health, financial security, and work-life balance

Job DescriptionSalary: $120K-$150K Position: Sr. Electrical Design Engineer / Project Engineer III Location: Bohemia, New York Overview: We are seeking a highly skilled Electrical Design Engineerwith a strong foundation in electrical and power supply concepts, combined with hands-on experience in designing and optimizing power supply systems. The ideal candidate will have a solid theoretical background in electrical engineering, specifically in power supply design, and experience with designing for manufacturing. Key Responsibilities: • Apply a strong theoretical background in Electrical/Power Supply Concepts to design and develop power supply systems that meet the required specifications and standards., • Design for Manufacturing (DFM): Ensure all designs are optimized for ease of manufacturing, considering cost, scalability, and quality control., • Utilize hands-on experience in electrical power supply design to innovate, troubleshoot, and refine power supply products. Qualifications: • Bachelors degree in electrical engineering or a related field., • 5-10 years of hands-on experience in power supply electrical design, • Thermal system design for power supply, • Knowledge of safety and reliability standards for power conversion devices, • Knowledge in firmware programming a plus, • Knowledgeable in simulation, computation program is a plus, • Manufacturing best practices knowledge is a plus Benefits: • 401(k), • 401(k) matching, • Dental insurance, • Health insurance, • Life insurance, • Paid time off, • Vision insurance

Job Description Mechanical Engineer Behlman Electronics, a leading power supply design firm located on Long Island, NY which was founded over sixty-five years ago as an engineering, manufacturing, and consulting firm for power products. Over that time, it has grown to become a leading power solutions provider for applications demanding cutting edge performance for commercial, industrial, and military mission-critical applications, is looking for a motivated technically minded individual for a position on its Engineering Team Job Description: The selected candidate will be expected to execute in a small, yet diverse, team environment through all phases of the product life cycle, this includes concept development, detail design, qualification, manufacturing transition, and production support. The engineer will be responsible for supporting the development of innovative and robust power supply solutions to meet demanding customer requirements and will leverage their mechanical engineering expertise to perform detailed design and analyses. Day to day, activities include working with 3D solid models, drawings, performing analyses to assure fit & function; performing thermal, structural/stress, and vibration analyses; assessing designs against environmental requirements. Desired Skills and Education: • Required Education: Bachelor's Degree in Mechanical Engineering or equivalent degree, • 3-5 years of relevant experience preferred., • Knowledge in fundamentals of mechanical design, analysis, and documentation principles, • Experience in Electronics Packaging and thermal simulation and analytical techniques. (Computational Fluid Dynamics, Finite Element Analysis etc)., • Experience with CAD development tools such as Inventor, Solidworks or Creo., • Strong written and verbal communication skills Salary - $90,000 - $100,000 Based on Experience. 401K Health Insurance Vision and Dental Insurance Life Insurance Paid Time off (Vacation, Holidays, sick leave etc.) Flexible Spending Accounts Tuition Assistance End of year time off Opportunities for advancement This is an on-site position and candidates must be a US Citizen or Permanent Resident. Company DescriptionBehlman Electronics Inc., an ISO 9001:2008 company, designs and manufactures a wide array of power productsBehlman Electronics Inc., an ISO 9001:2008 company, designs and manufactures a wide array of power products

Job Description Join North Wind – Accelerating Hypersonic Innovation At North Wind, we are advancing hypersonic technologies through cutting-edge research, system development, and flight testing. Our team drives innovation in high-speed aerodynamics, propulsion systems, and mission-critical components, supporting every phase of hypersonic programs—from R&D to flight testing. If you are passionate about pushing technological boundaries in a dynamic environment, we invite you to join us. Lead Engineer – Advanced Data Science for Aerospace Systems Key technical leadership position that drives the development and adoption of advanced data science methods with artificial intelligence (AI) and machine learning (ML) for aerospace ground and flight test techniques and modeling and simulation (M&S) capabilities across North Wind. Experienced in the creation and application of neural networks for surrogate models and other ML approaches for aerospace domain problems. Practitioner of computational fluid dynamics (CFD) and / or finite element analysis (FEA) codes. Skilled communicator who can operate as an individual contributor and a leader while supporting engineers to learn new AI/ML methods. Responsibilities: Development of AI/ML Tools for Aerospace Projects: Leads technical efforts to apply machine learning, artificial intelligence, and advanced data science methods to develop new ground and flight test techniques and M&S capabilities and workflows, with specific application for a new wind tunnel facility complex. Performs CFD and / or FEA and develops scalable model training processes and algorithms to build fast-running surrogate models of complex physical processes. Supports the development and implementation of AI/ML for test facility digital twins and integration of M&S workflows for multi-discipline design, analysis, and optimization and uncertainty quantification. Supports integration of wind tunnel facility data collection and use of AI for predictive maintenance. Advanced Data Science Strategy: Force multiplier who leads North Wind’s ML adoption, including helping engineering leadership select and integrate new tools and processes leveraging advanced data science methods. Strategically recommends projects across North Wind where AI and ML will strengthen technical execution. Creates and leads training sessions with engineering staff to support AI/ML up-skilling. Builds a cadre of ML practitioners across North Wind. Recommends high performance computing hardware architectures to support North Wind AI/ML vision and strategy. Engages in technical forums, conferences, and working groups, with specific focus on ML applied to high-speed aerospace systems. Team Management & Collaboration: Creates and leads highly functioning teams to develop AI/ML solutions and products. Effectively communicates the value proposition of advanced data science methods to grow team-wide understanding and interest. Fosters a collaborative and inclusive work environment. Preferred Education / Experience: • Advanced degree in Mechanical Engineering, Aerospace Engineering, or a related discipline, • Minimum 7-10 years of experience in engineering projects pertinent to the responsibilities listed above, • Strong knowledge of AI/ML tools, model training software, and technologies, • Skilled in building data pipelines and ML models using modern software libraries, including applications for deep learning and Bayesian modeling, • Proficient in aerospace industry standard CFD and / or FEA codes and tools, • Experienced in uncertainty quantification in the aerospace domain, • Deep understanding of engineering principles, including mechanical, electromechanical, and aerospace systems design, test, and evaluation, • Proficiency in interpreting engineering plans, technical drawings, and specifications, • Ability to define complex problems, analyze data, interpret abstract concepts, and develop effective solutions, • Demonstrated leadership of cross-functional teams from project conception to completion; guiding teams through planning, execution, and delivery phases, • Skilled in project management, prioritization, budgeting, and delivering results on time, • Excellent written and verbal communication skills, with the ability to tailor messaging to technical and non-technical audiences, • Proficient in Microsoft Office and engineering-related software tools, • Active U.S. security clearance strongly preferred; candidates must be U.S. citizens and eligible to obtain and maintain a clearance Additional Preferred Qualifications: • Experience with aerospace test systems and / or vehicle development programs, • Background in early-stage research and development, product development methodologies, and innovation strategy, • Familiarity with Department of Defense (DoD) acquisition processes, R&D funding, and technology development programs

Job Description iRocket (Innovative Rocket Technologies Inc.) is pioneering fully autonomous, fully reusable small launch vehicles to enable responsive, lower-cost access to space. We combine advanced propulsion, reuse, and sustainable propellant technologies to push the frontier of commercial space. The Role: We are seeking a Propulsion Engineer to join our propulsion team and contribute to the design, development, testing, and qualification of propulsion systems for our launch vehicles. You will work closely with integration, test, design, and manufacturing teams to bring propulsion systems from concept to flight readiness. • Support design, development, and testing of propulsion systems (e.g. liquid rocket engines, pressure-fed or pump-fed systems, component-level systems), • Participate in test campaigns, including planning, instrumentation, execution, and post-test analysis, • Develop and maintain test procedures, control sequences, and configuration files for propulsion testing, • Troubleshoot issues in propulsion subsystems (fluid, mechanical, thermal) during testing and integration, • Collaborate with cross-functional teams (mechanical, thermal, controls, electronics, systems) to ensure subsystem integration, • Perform calculations and simulations to support sizing, performance prediction, and optimization, • Support Test Readiness Reviews (TRRs), Failure Review Boards, and design reviews, • Implement continuous improvements to increase test efficiency, safety, and reliability, • Bachelor’s degree in Aerospace Engineering, Mechanical Engineering, or a related discipline, • 2+ years of experience in propulsion, test, or fluid/thermal systems development and testing, • Familiarity with liquid or hybrid rocket engine systems, fluid dynamics, thermodynamics, and heat transfer, • Experience with instrumentation, sensors, data acquisition, control systems, • Proficiency with scripting or programming (Python, MATLAB, etc.), • Ability to read and interpret engineering drawings, P&IDs, and technical specifications, • Strong problem-solving, data analysis, and communication skills, • Ability to work in multidisciplinary teams and in a fast-paced, evolving environment, • Experience with cryogenic fluids, high-pressure systems, or oxidizer/fuel systems, • Experience with CAD, simulation tools (CFD, thermodynamics, structural), or propulsion modeling, • Familiarity with propulsion test stands, plumbing, valve systems, or turbomachinery, • Experience in space, launch vehicle, or high-reliability systems, • Health Care Plan (Medical, Dental & Vision), • Retirement Plan (401k, IRA), • Life Insurance (Basic, Voluntary & AD&D), • Paid Time Off (Vacation, Sick & Public Holidays), • Family Leave (Maternity, Paternity), • Short Term & Long Term Disability, • Wellness Resources

Job DescriptionElectrical Design Engineer - CPU & DDR Board Design Job Title: Electrical Design Engineer - CPU & DDR Board Design Location: Bohemia, NY on-site Salary: $80k-$140k /yr depending on experience Requirements: BSEE or higher, 3+ yrs exp in Electrical Design, Circuit Design involving CPU's, microprosessors, DDR memory, oscilloscopes Position Overview We are seeking an experienced Electrical Design Engineer specializing in Circuit Design with CPU and DDR Board design to join our innovative team. The ideal candidate will be responsible for designing and implementing electrical circuits for a variety of applications, ensuring they meet specifications and standards. Key Responsibilities • Design and develop electrical circuit schematics and layouts., • Conduct simulations and analysis of circuit designs using industry-standard software., • Collaborate with cross-functional teams to integrate circuit designs into larger systems., • Perform testing and validation of electrical designs to ensure functionality and reliability., • Troubleshoot and debug circuit issues as they arise during development and production., • Prepare documentation for designs, including specifications, test plans, and reports., • Bachelor's degree in Electrical Engineering or a related field., • Proven experience in circuit design and development., • Strong understanding of electrical engineering principles and practices., • Proficiency with oscilloscopes and other electrical testing apparatus., • Familiarity with PCB design and schematic capture tools is a plus., • Experience in analog and digital electronics design., • Knowledge of simulation software such as Spice, VHDL, or Verilog is desirable., • Competitive Salary depending on experience, • Annual bonus (prorated in the first year), • Medical, dental, and vision coverage, • 401(k) plan with company match, • Paid Vacation: 2 weeks to start (prorated in the first year), • 9/80 summer schedule (discretionary), • Paid winter break, • Amazing company culture, • Career Growth, • and more! • For this position, you must be currently authorized to work in the United States without the need for sponsorship for a non-immigrant visa. This job was first posted by CyberCoders on 02/24/2026 and applications will be accepted on an ongoing basis until the position is filled or closed.CyberCoders is proud to be an Equal Opportunity Employer All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, age, sexual orientation, gender identity or expression, national origin, ancestry, citizenship, genetic information, registered domestic partner status, marital status, status as a crime victim, disability, protected veteran status, or any other characteristic protected by law. Our hiring process includes AI screening for keywords and minimum qualifications. Recruiters review all results. CyberCoders will consider qualified applicants with criminal histories in a manner consistent with the requirements of applicable state and local law, including but not limited to the Los Angeles County Fair Chance Ordinance, the San Francisco Fair Chance Ordinance, and the California Fair Chance Act. CyberCoders is committed to working with and providing reasonable accommodation to individuals with physical and mental disabilities. Individuals needing special assistance or an accommodation while seeking employment can contact a member of our Human Resources team at to make arrangements.

Job Description A confidential, industry-leading RF/microwave manufacturer is looking for an experienced RF Amplifier Design Engineer to design, develop, and test low noise and medium power amplifiers using both discrete transistor and MMIC technologies. You’ll work across hybrid and surface-mount designs, run linear and nonlinear simulations, support production, and contribute directly to new product development. This is a hands-on engineering role with real visibility inside the organization. What You’ll Do * Design, develop, and test discrete and MMIC-based low noise/medium-power amplifiers * Build new RF and microwave circuits, components, and products * Perform linear and nonlinear simulations for active and passive circuits * Define specs for microwave components and subassemblies * Support high-reliability testing and screening requirements * Generate design reviews, test reports, and documentation * Work with manufacturing teams to ensure efficient build processes * Estimate project schedules, track engineering labor, and support technical proposals What You Need * Bachelor’s in Electrical Engineering with 4+ years experience, or Master’s with 2+ * At least 2 years designing and simulating low noise amplifiers * Experience designing passive RF/microwave components (couplers, dividers, attenuators) * Experience designing for manufacturability and managing engineering projects * Proficient with linear CAE tools plus exposure to nonlinear CAE * Hands-on lab/test experience: VNAs, noise figure analyzers, spectrum analyzers, power meters, signal generators * Ability to work under a microscope in a cleanroom environment * Familiarity with semiconductor devices like GaAs and GaN * Strong communication skills * Must be able to obtain a Secret-level security clearance Preferred Experience * Familiarity with MIL-specs: MIL-PRF-38534, MIL-STD-202 * Experience aligning and tuning fine-pitch circuits under a microscope * Knowledge of oscillator, synthesizer, PIN-diode, and filter design * System-level cascade and spur analysis * Proficiency with Keysight ADS, RFPro, Ansys HFSS, and EM simulation tools * CAD familiarity: AutoCAD, Inventor * Design/test experience up to 26 GHz or higher (40 GHz preferred) * Hybrid chip-and-wire and PCB SMT manufacturing exposure * Wire bonding experience

Job DescriptionHardware Design Engineer FPGA/Analog Job Title: Hardware Design Engineer - FPGA/Analog Location: Suffolk County, NY on-site Salary: $85k-$140k DOE Requirements: BSEE or related degree, 3+ years experience in Mixed Signal Embedded HW design, PCB, FPGA/VHDL development Position Overview We are seeking a talented Hardware Design Engineer with a strong background in FPGA and Analog design to join our innovative engineering team. The ideal candidate will contribute to the development of cutting-edge hardware solutions, ensuring high performance and reliability in our products. Key Responsibilities • Design and develop PCB layouts for complex electronic systems, • Implement FPGA designs using various hardware description languages such as Verilog and VHDL, • Conduct simulations and timing analysis to validate designs, • Collaborate with cross-functional teams to integrate analog and mixed-signal components into designs, • Debug and troubleshoot hardware issues in prototypes and production units, • Conduct signal processing analysis and optimize circuit designs for performance, • Document designs and create detailed specifications and reports, • BS in Electrical Engineering or a related fieldor related, • 3+years exp in PCB design and layout, Mixed-Signal Embedded Hawdware Design, • Proficiency in FPGA development and design methodologies, • Solid understanding of electrical engineering principles and mixed-signal design, • Experience with Verilog, VHDL, and other hardware description languages, • Familiarity with digital design, synthesis, and simulation tools, • Knowledge of circuit design and signal processing techniques, • Experience with ORCAD, LTSpice, and Vivado is a plus, • Strong problem-solving skills and attention to detail, • Competitive Salary, • Medical/Dental/Vision, • Life and AD&D, • 401(k) with matching, • Vacation, • PTO/Sick Time, • Tution Reimbursement, • Annual Bonus, • Career and Education development, • Schedule Flexibility, • and More! • For this position, you must be currently authorized to work in the United States without the need for sponsorship for a non-immigrant visa. This job was first posted by CyberCoders on 02/20/2026 and applications will be accepted on an ongoing basis until the position is filled or closed.CyberCoders is proud to be an Equal Opportunity Employer All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, age, sexual orientation, gender identity or expression, national origin, ancestry, citizenship, genetic information, registered domestic partner status, marital status, status as a crime victim, disability, protected veteran status, or any other characteristic protected by law. Our hiring process includes AI screening for keywords and minimum qualifications. Recruiters review all results. CyberCoders will consider qualified applicants with criminal histories in a manner consistent with the requirements of applicable state and local law, including but not limited to the Los Angeles County Fair Chance Ordinance, the San Francisco Fair Chance Ordinance, and the California Fair Chance Act. CyberCoders is committed to working with and providing reasonable accommodation to individuals with physical and mental disabilities. Individuals needing special assistance or an accommodation while seeking employment can contact a member of our Human Resources team at to make arrangements.

Job Description Join North Wind – Accelerating Hypersonic Innovation At North Wind, we are advancing hypersonic technologies through cutting-edge research, system development, and flight testing. Our team drives innovation in high-speed aerodynamics, propulsion systems, and mission-critical components, supporting every phase of hypersonic programs—from R&D to flight testing. If you are passionate about pushing technological boundaries in a dynamic environment, we invite you to join us. The Lead Engineer – Digital Integrated Systems is a key technical leadership position that reports to the Office of the Chief Engineer and drives the technical execution of the company’s digital engineering (DE) vision for current and future projects. Experienced in architecting, designing, and integrating digital engineering hardware and software platforms for multi-domain, complex systems. A practitioner of digital engineering tools and model-based approaches who will help guide the company’s digital transformation. Skilled communicator who can operate as an individual contributor and a leader while distilling the value proposition of digital engineering and building company-wide interest in adoption of new digitally integrated approaches and processes. Responsibilities: Digital Engineering Platform Development: Leads the architecture development, design, build, integration, and deployment of a digital engineering hardware and software platform for a new wind tunnel facility complex. Develops digital engineering technology solutions that evolve with the project, are scalable to new applications, and are aligned with government architectures and frameworks. Engages the team to develop the critical DE data flows and workflows that streamline test conduct and improve test utility for aerospace system developers. Leads the development and implementation of DE platform tools, including digital twins, use of machine learning (ML) and artificial intelligence (AI) for improved design processes and test techniques, and integration of modeling and simulation (M&S) workflows for multi-domain design, analysis, and optimization. Digital Transformation: Guides the company’s digital modernization, including helping engineering leadership select and integrate new DE software tools and processes. Engages engineering workforce to support selection and adoption of new DE-related tools and workflows. Creates and leads training sessions with engineering staff to support DE upskilling. Team Management & Collaboration: Creates and leads highly functioning teams to develop digital engineering solutions and products. Effectively communicates the value proposition of digital engineering to grow team-wide understanding and interest. Fosters a collaborative and inclusive work environment that encourages innovation, accountability, and professional growth. Technical Expertise: Experience in architecting, designing and integrating a digital engineering hardware and software platform for a multi-domain, physical system / product. Practitioner of product lifecycle management tools, model-based systems engineering, and creating digital threads between software tools to integrate complex workflows and system development. Cross-functional Support: Partners with Division and Functional leadership to ensure alignment and seamless integration of digital initiatives. Performance Monitoring & Optimization: Tracks and analyzes digital performance metrics, providing insights and recommendations for improvement. Preferred Education / Experience: • Advanced degree in Mechanical Engineering, Aerospace Engineering, or a related discipline, • Minimum 10 years of experience in engineering projects pertinent to the responsibilities listed above, • Strong knowledge of digital engineering tools and technologies, including model-based systems engineering (MBSE), product lifecycle management (PLM) tools, digital twins, digital threads, and cloud-based platforms, • Demonstrated success driving the technical execution of digital engineering platforms and initiatives, • Deep understanding of engineering principles, including mechanical, electromechanical, and aeronautical systems design, test, and evaluation, • Proficiency in interpreting engineering plans, technical drawings, and specifications, • Ability to define complex problems, analyze data, interpret abstract concepts, and develop effective solutions, • Skilled in project management, prioritization, budgeting, and delivering results on time, • Familiarity with Department of Defense (DoD) acquisition processes, R&D funding, and technology development programs, • Excellent written and verbal communication skills, with the ability to tailor messaging to technical and non-technical audiences, • Proficient in Microsoft Office and engineering-related software tools., • Experience with aerospace test systems and / or vehicle development programs, • Background in early-stage research and development, product development methodologies, and innovation strategy

Bachelors or Masters degree in Computer Engineering, Electrical Engineering, or relevant discipline. Partner with engineers to integrate hardware and software components. We are looking for a Mid–Senior Embedded Software Engineer to join our team focused on designing, developing, and maintaining f

The successful candidate will be responsible for: • Working with a team to maintain OpenShift clusters on premises and in the cloud • Designing and extending CI/CD pipelines that embody DevSecOps best practices, from automated testing to continuous compliance • Lead modernization of legacy ser

Lead integration and test of electro-optical/infrared systems and related hardware/software Lead product test and design verification, requirements sell-off, and end item data package generation efforts Support/lead data analysis and modeling and simulation Evaluate space vehicle and end customer ne

If you’re ready to shape the future of naval technology in a collaborative and supportive environment, we want to hear from you! Required Combination of Knowledge and Skill Bachelors degree from an accredited college or university in Computer Science, Computer Engineering, or Electrical Engineerin

Required Combination of Knowledge and Skill Candidates for Software Developer internship positions must be: Pursuing Computer and Electrical Engineering, Computer Science, Information Technology, Information Science, or related BS, MS or PhD degrees from an accredited college or university Must have

Collaborate with design engineering teams to enhance manufacturability of products.

Job Title: Lead, Reliability Systems Engineer - Team Lead. Join our mission-critical team as a Reliability Engineer, ensuring the success of cutting-edge Ground, Space, and Airborne Systems.

BS or MS in Computer Engineering, Electrical Engineering, or related field. We’re seeking a to design, develop, and maintain firmware for low-power, connected embedded systems. Collaborate with engineers to integrate hardware and software components.

The ideal candidate for this position will be proficient in all aspects of the systems engineering process, will have direct and significant experience designing and testing complex systems, and will be comfortable coordinating teams of technical personnel. Support/lead data analysis and modeling an

Focusing on the Non-Recurring Engineering (NRE) activities early in the design process, the NPI Engineer will help drive affordability, producibility and technology trends into our factories to maximize design flexibility, manufacturability, and lower overall product costs. The New Product Introduct

Bachelor's Degree in Computer Science, Electrical Engineering, Computer Engineering, or other scientific degree with strong software content. We are actively seeking an Entry Level Software Engineer with a range of skills and a passion for learning new things who can apply their skills to developing

You’ll work hands-on with both RF and networking technologies, bridging the gap between hardware and system-level design, while collaborating with diverse engineering teams across the organization. Collaborate with Chief Engineers, program managers, and cross-functional teams to deliver robust, sc

During formal acceptance testing, the engineer will be responsible for hands-on engineering support of the system, including troubleshooting and live target data analysis. This position is for an experienced Radar System Integration and Test engineer who will provide leadership to Integration and Te

To be eligible, applicants must be pursuing a Master’s Degree in systems engineering, Electrical Engineering, Mechanical Engineering, Computer Engineering, Computer Science, Physics, Mathematics, Aviation, Aerospace Engineering, or related field or have completed their Master’s degree within the

Job Title: Lead RF Manufacutring Engineer. Manages manufacturing engineers/SMT and machinist staff. Use creativity to work within an innovative experienced team of manufacturing and engineering professionals to determine, revise and review economic methods, operation sequences and tooling.

Bachelor's degree in Electrical, Systems Engineering, Computer Engineering, Mathematics or related STEM discipline from an accredited college. As a lead engineer, you will help shape the future of mission and avionics systems while mentoring the next generation of engineers. Lockheed Martin RMS is s

Job Title: Lead Quality Engineer. Bachelor's degree Engineering and minimum 9 years prior relevant experience. Minimum 7+ years in aerospace quality engineering.

Master's degree in computer science, Electrical Engineering, or related disciplines with a minimum of three years of industry experience [a bachelor's degree in computer science, Electrical Engineering, or related disciplines with a minimum of five years of industry experience may be substituted as

Process Engineer Job Duties: Oversees and assesses existing processes and workflows. Utilizes process simulation software to test and find the most appropriate production strategies.