Simulation engineer jobs in Austin, TexasCreate job alerts

Electronic Repair Engineer JOB SUMMARY: The purpose of the job is to repair, upgrade, modify, or verify sub components of a wide variety of complex automatic/logic controlled electronic or electro-mechanical equipment at a component level. Important duties include using advanced diagnostic techniques; improvising circuits or equipment to special needs; working independently on assigned projects; performing complex analysis of major malfunctions to the component level; performing calibrations traceable to the National Bureau of Standards. Important skills and abilities include setting up, operating and adjusting complex instrumentation; knowledge of analog, digital, and RF electronics; moderate circuit design abilities; high level of mechanical ability (i.e. considerable knowledge of pneumatics, hydraulics and fluidics); and safe working procedures. • Individual must be able to work with minimum supervision in high pressure environment, subject to shifts in priorities., • Individual must be able to effectively interface with customers, suppliers, employees and management., • Individual must be able to accurately provide repair estimates, for both cost and time., • Individual must be able to document repair procedures and train others to perform said repairs., • Individual needs organizational skills necessary to maintain stocking levels of key components., • Candidate needs to have basic knowledge of Microsoft Office and the ability to master database programs., • Individual must be able to lift 50+ pounds in the course of carrying out job duties and follow all safety procedures, including but limited to electrical, chemical and mechanical safety procedures. EDUCATION AND EXPERIENCE: Individual must have BS degree in Electrical Engineering plus three to four years of directly related electro-mechanical experience. Individual must be able to effectively troubleshoot to the component level. Must be capable of interpreting electrical datasheets and related terminology. Previous experience as a Hardware Engineer in repairing is highly preferred. Individual must have proficient soldering/de-soldering skills including Surface Mount, Ball Grid Array, high density components. Equivalent combination of education and experience may be acceptable. SPECIFIC SKILLS AND TARGETED EXPERIENCE: • High Power DC supply repair, testing and calibration ranging from 1kW to 80kW., • AC and DC Servo/Stepper motor rebuild and test., • Embedded systems hardware/firmware including CPLD, FPGA, MPU, etc., • Senior experience in AC and DC circuitry, advance test equipment, simulation software, and discrete semiconductor characteristics., • Labview, Python, Multi-Sim, or equivalent electrical design software., • Hardware programming language (JTAG, etc.)

Power Electronics Design Engineer Austin, TX (Relocation support provided) Base salary + RSUs + Annual Bonus + Insurances About the Company An exciting opportunity for an innovative engineer to contribute to the advancement of next-generation power switching and driver technologies. This role involves hands-on design, development, and validation of advanced power electronics circuits for applications in electric vehicles, renewable energy, energy storage, and industrial systems. The ideal candidate is a self-starter with deep technical expertise and thrives in a dynamic, collaborative environment focused on cutting-edge energy solutions. About the Role This role involves hands-on design, development, and validation of advanced power electronics circuits for applications in electric vehicles, renewable energy, energy storage, and industrial systems. Responsibilities • Design, develop, and test PCB-based power drivers, converters, inverters, and solid-state circuit breakers according to technical and customer requirements., • Characterize discrete and module-level power devices and generate datasheets and performance comparisons., • Support application engineering teams to interface effectively with customers and partners., • Develop validation and prototype test plans for power electronics circuits., • Prepare and present technical documentation, including whitepapers and external-facing technical materials., • Provide technical leadership and mentorship to engineering technicians and junior staff. Qualifications • Masters in Power Electronics with 3+ years of industry experience Required Skills • Expertise in DC/AC converter, inverter, solid-state circuit breaker, and gate driver design., • Strong proficiency in power electronics analysis, circuit simulation, PCB design, and lab testing., • Working knowledge of power device physics (IGBT, SiC, BJT, MOSFET, FRD)., • Familiarity with microcontroller coding and embedded systems., • Software proficiency in Altium, SPICE, C++, or Python., • Excellent organizational skills and ability to meet project deadlines. Equal Opportunity Statement This company is committed to fostering an inclusive and diverse workplace, prohibiting discrimination based on race, color, religion, gender, national origin, age, disability, veteran status, marital status, pregnancy, gender identity, sexual orientation, or any other legally protected status.

Summary The Principal Power Engineer develops new electrical systems/circuits for various applications. Research system ideas and draw up plans for these systems, and capture them in schematics and system specifications. Test, simulate, validate and qualify their systems and make adjustments as needed. Provide support throughout the manufacturing of the electrical systems they have designed. The Principal Power Engineer works in cross functional teams with other designers, customers, manufacturing engineering and project leadership to ensure robust and high quality product development. Enhance designs with feedback from reviews in areas such as manufacturing, test, supply chain, reliability, industrial design and simulations. Detailed Description Performs tasks such as, but not limited to, the following: • Work autonomously and take initiatives to manage team priorities, • Provide technical guidance and support to Staff and Sr. engineers, • Design, develop and implement technical solutions for complex projects. Participate in project planning and scheduling., • Propose innovative solutions for performance, reliability, and features of system or product., • Global SME with comprehensive knowledge and industry recognition. Provides technical leadership and direction to a global team of engineers., • Reviews and interprets customer specifications and may act as primary customer contact., • Analyze trade-offs in complex systems and recommend solutions. Develop and lead deployment strategies and plans., • Lead and manage schematic design, Bills of material, power tree, drawings, board layout, and cross-functional design reviews, • Lead power bring-up, debugging, and support for manufacturing assembly, and deployment, • Takes responsibility for non-technical elements of an engineering project (people, financials etc.), • Lead relationships with key vendors and partners., • Keep up to date with relevant industry knowledge and regulations, and share within team, • Liaison with suppliers, customers, contractors, and other internal teams., • Analyze and create reports and documentation of specifications, design, testing, debugging, and etc., • May be a recognized expert (go to person) in one or more technical areas. Knowledge/Skills/Competencies • Considered a Subject Matter Expert in the area of power design, such as single/multi-phase DC/DC converter, point-of-load converter, LDO, MOSFETs, magnetics, hot-swap circuitry of how-swap controller, load switches, current sense circuit and amplifier, and etc, • Experienced in designing power systems for networking, compute, or storage products, • Experienced in high-current, low-voltage power subsystems for CPU, GPU, ASIC, SoC, and FPGA, • Experienced in PCB stack-up, power planes, and tools used to simulate voltage gradients, • Familiar with schematic capture and CAD layout tools or equivalent ones, • Proficient with circuit simulation tools such as SIMPLIS, PSPICE, and LTSPICE, or equivalent tools, • Experienced with end-to-end power delivery network design, and simulation using circuit simulation tools, Sigrity PowerDC/SI, ANSYS SIWave or equivalent, and board level correlation, • Knowledge of high-density power modules and Vertical Power Delivery (Knowledge on Integrated Voltage Regulator (IVR) is a plus), • Experienced with power integrity evaluation, • Experienced with design and troubleshooting of power management interfaces such as PMBus, AVS, SVID and SVI2/3., • Experienced with defining specifications and validation of power connectors, cable assemblies and fuses, • Familiar with NPI hardware design and deployment cycle, • Experienced with development of test automation for power validation that is a plus., • Excellent verbal and written communication skills, and ability to present to various audiences effectively Physical Demands • Duties of this position are performed in a normal office environment., • Duties may require extended periods of sitting and sustained visual concentration on a computer monitor or on numbers and other detailed data., • Repetitive manual movements (e.g., data entry, using a computer mouse, using a calculator, etc.) are frequently required., • Occasional travel may be required. Typical Experience • 11+ years' relevant work experience with 3+ in a leadership capacity. Typical Education • Bachelor degree or consideration of an equivalent combination of education and experience., • Educational Requirements may vary by Geography

Job Title: Silicon CAD (Power) Engineer IV Location: Role is ONSITE- US: Austin, TX or Sunnyvale, CA Duration: 12 Months About the Role: Top 3 Must-Have Skills: • Power analysis and reduction (with industry tools), • RTL-to-GDSII flow and low-power implementation, • Experience with synthesis and Place and Route (PnR) flows., • Experience analyzing Intellectual Property (IP) design for power characteristics and building run-time estimation models for use by software/firmware teams., • Skills in data analysis and data modeling, including the application of machine learning approaches., • Must Have: Bachelor degree in Electrical/Computer Engineering or Computer Science, • Perform comprehensive power analysis at various design stages, spanning from RTL to GDSII., • Contribute to the development, improvement, and automation of various power analysis flows., • This includes gathering and analyzing large datasets for power modeling via automated processes., • Demonstrated experience with RTL-to-GDSII design flow usage and development in advanced technology nodes (7nm and below)., • Expertise in low-power implementation and signoff, including power gating, multiple voltage rails, and Unified Power Format (UPF) usage., • Proven experience in power analysis and reduction utilizing industry-standard tools such as PrimeTime PX/PrimePower., • Proficiency in scripting languages, with a strong emphasis on Python and ML/AI frameworks., • Working knowledge of RTL design principles., • Experience in RTL power optimization using specialized tools like Power-Artist., • Experience with synthesis and Place and Route (PnR) flows., • Experience analyzing Intellectual Property (IP) design for power characteristics and building run-time estimation models for use by software/firmware teams., • 2 O 30-minute rounds of interviews, • Confirming basic concepts, technical Python coding questions (5-10 min)

Job Posting Title: Thermal Mechanical Modeling Engineer Hiring Department: Texas Institute for Electronics Position Open To: All Applicants Weekly Scheduled Hours: 40 FLSA Status: To Be Determined at Offer Earliest Start Date: Ongoing Position Duration: Expected to Continue Location: AUSTIN, TX Job Details: About Us The___is a University of Texas at Austin-supported semiconductor consortium of state and local government, preeminent defense electronics and semiconductor companies, national labs and nationally recognized academic institutions. Our mission is to develop and execute a state-of-the-art 3D Heterogenous Integration manufacturing technology roadmap, and to provide critical pilot manufacturing capabilities to address national security needs and catalyze domestic economic growth. Join the Texas Institute for Electronics (TIE) and help us push the boundaries in critical semiconductor domains, including advanced packaging, with the aim of reestablishing U.S. prominence in semiconductor manufacturing. With over $1 billion in funding from the US DoD and the state of Texas, we're at the forefront of creating cutting-edge semiconductor manufacturing equipment and processes that will set the course for future advancements in semiconductor logic, memory, heterogeneous integration, chip cooling and more. Situated in the heart of Austin - named "America's Coolest City" by Expedia and "The Best Place to Live in the U.S." by U.S. News and World Report - the Texas Institute for Electronics embodies the city's innovative spirit. UT Austin, recognized by Forbes as one of ___, provides outstanding ___ and ___ packages that include: • Competitive health benefits (employee premiums covered at 100%, family premiums at 50%), • Voluntary Vision, Dental, Life, and Disability insurance options, • Generous paid vacation, sick time, and holidays, • Teachers Retirement System of Texas, a defined benefit retirement plan, with 8.25% employer matching funds, • Additional Voluntary Retirement Programs: Tax Sheltered Annuity 403(b) and a Deferred Compensation program 457(b), • Flexible spending account options for medical and childcare expenses, • Robust free training access through LinkedIn Learning plus professional conference opportunities, • Tuition assistance, • Expansive employee discount program including athletic tickets, • Free access to UT Austin's libraries and museums with staff ID card, • Free rides on all UT Shuttle and Austin CapMetro buses with staff ID card, • For more details, please see ___ and ___ and ___ Must be eligible to work in the United States on a full-time basis for any employer without sponsorship. This role is to lead and execute comprehensive thermal and mechanical simulations for advanced 2.5D/3.0D heterogeneous integration and multi-material packages. The position will also collaborate with EDA vendors, OSATs, and foundries, and stay current with next-gen interface standards to guide technical strategy and mentor junior engineers. • Own and execute hands-on semiconductor package mechanical and thermal simulations for advanced 2.5D/3.0D heterogeneous integration and multi-material packages., • Perform modeling, extraction, and verification of high-speed interconnects, power delivery networks, thermal management, and mechanical stress across chiplets and advanced substrates., • Build and validate comprehensive ADK/PDK models (electrical, EM, thermal, mechanical) that accurately represent package-level behavior and enable system-level co-design., • Run end-to-end simulation workflows including thermal/structural reliability checks, and co-simulation across domains., • Collaborate directly with EDA vendors (Cadence, Ansys, Synopsys, Siemens, Keysight, etc.), OSATs, and foundries to develop, test, and refine package simulation flows., • Generate user guides, reference flows, scripts, and automation that make SI/PI/multiphysics enablement repeatable and accessible to design teams., • Stay current with next-gen interface standards (PCIe Gen6/7, CXL, UCIe, UALink, SerDes, HBM) and incorporate their requirements into package design methodologies., • Guide technical strategy for SI/PI flows, mentor junior engineers, and represent TIE in working groups, customer design reviews, and industry forums., • Other related functions as assigned., • BS in Electrical Engineering, Computer Engineering, Applied Physics, or related discipline., • 3 or more years of direct, hands-on experience in multiphysics simulations for advanced packaging, 2.5D/3DIC, or heterogeneous integration platforms., • Strong expertise with EDA/EM/multiphysics tools: Ansys HFSS/SIwave, Cadence Sigrity/Clarity, Synopsys RaptorX, Siemens HyperLynx, Keysight ADS, COMSOL, CST Studio., • Proven ability to extract/package-level models (dielectric/thermal constants, warpage/stress data) and integrate them into design enablement flows., • Hands-on scripting/automation skills (Python, Tcl, SKILL, etc.) to streamline simulation flows., • You're energized by ambiguity, act with urgency, and take personal ownership for outcomes. You make things happen., • Execution mindset. You have demonstrated experience working in a hands-on role driving progress across multiple initiatives without layers of management., • Location. Austin, Texas is required for close collaboration with our engineering teams and partners., • MS or PhD in Electrical Engineering, Applied Physics, or related discipline., • 5 or more years of direct, hands-on experience in multiphysics simulations for advanced packaging, 2.5D/3DIC, or heterogeneous integration platforms., • Deep experience with multi-material packages (Si, glass, organics, Cu, RDL, TSV, hybrid bonding, etc.)., • Expertise in system-level co-simulation spanning electrical, thermal, and mechanical domains for high-power/high-bandwidth-density packages., • Familiarity with industry standards (IEEE, JEDEC, OIF, UCIe, 3Dblox, JEP30) and experience contributing to working groups., • Background in high-speed interconnect modeling and compliance testing for PCIe, CXL, UCIe, SerDes, HBM, or similar standards., • Demonstrated experience creating and validating PDK/ADK simulation collateral spanning thermal, and mechanical domains., • Track record of technical publications, patents, or open-source contributions in SI/PI/multiphysics simulation and design enablement. TIE Pays Industry Competitive Salaries • Uniforms and/or personal protection equipment (furnished), • May work in all weather conditions, • May work in extreme temperatures, • May work around chemical fumes, • May work around standard office conditions, • May work around biohazards, • May work around chemicals, • May work around electrical and mechanical hazards, • Repetitive use of a keyboard at a workstation, • Use of manual dexterity (ex: using a mouse), • Climbing of stairs, • Climbing of ladders, • Lifting and moving 30 pounds, • Monday - Friday, • Occasional nights/weekends required, • Resume/CV, • 3 work references with their contact information; at least one reference should be from a supervisor, • Letter of interest Importantfor applicants who are NOT current university employees or contingent workers:You will be prompted to submit your resume the first time you apply, then you will be provided an option to upload a new Resume for subsequent applications. Any additional Required Materials (letter of interest, references, etc.) will be uploaded in the Application Questions section; you will be able to multi-select additional files. Before submitting your online job application, ensure thatALLRequired Materials have been uploaded. Once your job application has been submitted, you cannot make changes. Important for Current university employees and contingent workers:As a current university employee or contingent worker, you MUST apply within Workday by searching for Find UT Jobs. If you are a current University employee, log-in to Workday, navigate to your Worker Profile, click the Career link in the left hand navigation menu and then update the sections in your Professional Profile before you apply. This information will be pulled in to your application. The application is one page and you will be prompted to upload your resume. In addition, you must respond to the application questionspresented to upload any additional Required Materials (letter of interest, references, etc.) that were noted above. Employment Eligibility: Regular staff who have been employed in their current position for the last six continuous months are eligible for openings being recruited for through University-Wide or Open Recruiting, to include both promotional opportunities and lateral transfers. Staff who are promotion/transfer eligible may apply for positions without supervisor approval. Retirement Plan Eligibility: The retirement plan for this position is Teacher Retirement System of Texas (TRS), subject to the position being at least 20 hours per week and at least 135 days in length. This position has the option to elect the Optional Retirement Program (ORP) instead of TRS, subject to the position being 40 hours per week and at least 135 days in length. Background Checks: A criminal history background check will be required for finalist(s) under consideration for this position. Equal Opportunity Employer: The University of Texas at Austin, as an ___,complies with all applicable federal and state laws regarding nondiscrimination and affirmative action. The University is committed to a policy of equal opportunity for all persons and does not discriminate on the basis of race, color, national origin, age, marital status, sex, sexual orientation, gender identity, gender expression, disability, religion, or veteran status in employment, educational programs and activities, and admissions. Pay Transparency: The University of Texas at Austin will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information. Employment Eligibility Verification: If hired, you will be required to complete the federal Employment Eligibility Verification I-9 form. You will be required to present acceptable and original ___ to prove your identity and authorization to work in the United States. Documents need to be presented no later than the third day of employment. Failure to do so will result in loss of employment at the university. E-Verify: The University of Texas at Austin use E-Verify to check the work authorization of all new hires effective May 2015. The university's company ID number for purposes of E-Verify is 854197. For more information about E-Verify, please see the following: • ___ [PDF], • ___ [PDF], • ___ [PDF] Compliance: Employees may be required to report violations of law under Title IX and the Jeanne Clery Disclosure of Campus Security Policy and Crime Statistics Act (Clery Act). If this position is identified a Campus Security Authority (Clery Act), you will be notified and provided resources for reporting. Responsible employees under Title IX are defined and outlined in ___. The Clery Act requires all prospective employees be notified of the availability of the Annual Security and Fire Safety report. You may ___ or obtain a copy at University Compliance Services, 1616 Guadalupe Street, UTA 2.206, Austin, Texas 78701.

Hungry for challenges? Join a group with innovation at its heart and contribute to the automotive revolution! OPmobility is a world-leading provider of innovative solutions for a unique, safer and more sustainable mobility experience. Innovation-driven since its creation, the Group develops and produces intelligent exterior systems, customized complex modules, lighting systems, clean energy systems and electrification solutions for all mobility companies. With a €11.4 billion economic revenue in 2023, a global network of 152 plants and 40 R&D centers, OPmobility relies on its 40,300 employees to meet the challenges of transforming mobility. OPmobility Modules develops, assembles and delivers complex, just-in-sequence modules for mass production. World leader, HBPO, now 100% OPmobility, specializes in highly integrated modules, including front-end & cockpit modules, center consoles and charge lid modules. Through new BEVs architectures, it constantly develops new modules with customized solutions. Our ambition? Provide automakers with cutting-edge equipment and solutions to develop tomorrow’s clean and connected car. Process Engineering Manager Location: 12621 Harris Branch Pkwy, Manor, TX 78653 Schedule: Full-time, Onsite Department: Industrial Engineering About the Role We are seeking a Process Engineering Manager to lead process optimization and injection molding operations in a high-volume manufacturing environment. This role is critical for ensuring productivity, quality, and compliance while driving continuous improvement and automation initiatives. Key Responsibilities Lead Process Control: Maintain stable injection processes and guarantee 95% productivity. Drive Continuous Improvement: Implement SMED methodology for mold changes and TPM programs for machines and peripheral equipment. Develop and Qualify Processes: Oversee injection mold testing, process development, and qualification using scientific techniques and DoE. Team Leadership: Coordinate operational staff and provide technical training on injection molding equipment. Automation & Maintenance: Ensure optimal performance of automation systems, arm ends, and feeders. Compliance & Standards: Ensure adherence to ISO 9001, ISO 14001, IATF 16949, ISO 45001, and ISO 50001 standards. Kaizen Leadership: Champion process improvement activities and lead cross-functional teams. What We’re Looking For Education: Bachelor’s degree in Chemical, Mechanical, or related Engineering field. Experience: 7+ years in plastic injection processes (machines >1500 tons) or process engineering. 3+ years in end-of-arm automation. Skills: Expertise in Lean Manufacturing, TPM, SMED, hydraulics, pneumatics, and robotics. Strong leadership, problem-solving, and analytical skills. Proficiency in process simulation software and engineering tools. Certifications: Professional Engineer (PE) preferred. Languages: English required; Spanish or German a plus. Why Join Us? Lead high-impact engineering initiatives in a global manufacturing organization. Work in a collaborative environment with cutting-edge technology and automation. Opportunities for career advancement and professional development. This is an onsite position in Manor, TX. Remote work is not available. ✅ Apply today and help us shape the future of advanced manufacturing! As a responsible company, OPmobility pays particular attention to diversity and equality within its teams and the Group commits to treat all job applications equally. Date: Apr 1, 2026 Location: Austin-Texas, TX, US, 78653 Job Requisition ID: 387970 Other jobs in Industrial

This Jobot Job is hosted by: Holly Leahy Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $150,000 - $200,000 per year A bit about us: We are seeking a dedicated and detail-oriented Quality Technician to join our team. As a Quality Technician, you will play a critical role in ensuring the highest standards of quality in the manufacturing and assembly of cutting-edge electronics and components. This position will require you to collaborate closely with various teams to drive improvements and ensure products meet strict specifications and functional requirements. Why join us? premiere medical, dental, vision, and life insurance plans 401k Inclusive, flexible work environment. We offer healthy snacks and daily catered meals, in addition to family-friendly company events featuring our CEO’s famous BBQ! Job Details About the Role Join a world-class team building the next generation of high-performance compute hardware for artificial intelligence and machine learning applications. We’re developing industry-leading AI accelerators that push the limits of scale, speed, and efficiency—empowering researchers and enterprises to train and deploy the largest AI models with unprecedented ease. As a Senior Design Verification Engineer, you’ll own the end-to-end verification of a critical subsystem in our next-generation AI processor. You’ll collaborate with experts across architecture, RTL design, physical design, firmware, and validation to ensure flawless execution from concept to post-silicon bring-up. This is a high-impact role where your technical insight, leadership, and creativity will directly shape the success of our products. Key Responsibilities Own and drive the full verification lifecycle for a major IP block—from initial strategy through post-silicon validation. Define and implement advanced verification methodologies, test plans, and coverage metrics that ensure top-tier quality and performance. Develop and maintain UVM-based, constrained-random and directed testbenches. Collaborate closely with architecture and design teams to review specifications and ensure functional correctness and testability. Debug complex issues spanning simulation, emulation, and silicon. Enhance verification infrastructure and flows for improved scalability, coverage, and turnaround time. Mentor and guide junior engineers, promoting best practices and technical excellence. Provide clear communication and technical leadership on progress, risks, and schedules across teams. Qualifications 10+ years of design verification experience in complex ASIC/SoC projects. Deep proficiency in SystemVerilog and UVM. Strong understanding of verification planning, coverage closure, and constrained-random methodologies. Experience with industry-standard EDA tools, simulators, and debugging environments. Skilled in scripting languages (Python, Perl, or similar) for automation and productivity. Demonstrated success in cross-functional collaboration and problem-solving. Bachelor’s or Master’s degree in Electrical Engineering, Computer Engineering, or a related field. Preferred Experience Verification of memory controllers, high-performance interconnects, or compute subsystems. Exposure to emulation, FPGA prototyping, or post-silicon bring-up. Contributions to developing scalable, reusable verification environments and methodologies. Proven ability to influence verification strategy and mentor others in advanced techniques. Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

Job Posting Title: Senior or Principal Signal Power Integrity and Multiphysics Engineer, Texas Institute for Electronics Hiring Department: Texas Institute for Electronics Position Open To: All Applicants Weekly Scheduled Hours: 40 FLSA Status: To Be Determined at Offer Earliest Start Date: Ongoing Position Duration: Expected to Continue Location: AUSTIN, TX Job Details: Applicants must be eligible to work in the United States on a full-time basis for any employer without sponsorship. The___is a transformative, well-funded semiconductor foundry venture combining the agility of a startup with the scale of a national initiative. A key part of our mission is to advance the state of the art in 3D heterogeneous integration (3DHI), chiplet-based architectures, and multi-component microsystems- catalyzing breakthroughs across microelectronics, artificial intelligence, quantum computing, high-performance computing, and next-generation healthcare devices. Backed by $1.4 billion in combined funding from DARPA, Texas state initiatives, and strategic partners, we are building foundational capabilities in advanced packaging and integrated design infrastructure to restore U.S. leadership in microelectronics manufacturing. Our 3DHI and chiplet integration platforms integrate novel thermal management and advanced interconnect solutions to deliver unprecedented performance and energy efficiency. Operating at the intersection of defense electronics and commercial markets, TIE offers a rare opportunity to reimagine an industry from the ground up and build transformative products with global impact. With over $1 billion in funding from the US DoD and the state of Texas, we'reat the forefront of creating cutting-edge semiconductor manufacturing equipment and processes that will set the course for future advancements in semiconductor logic, memory, heterogeneous integration, chip cooling and more. Situated in the heart of Austin - named "America's Coolest City" by Expedia and "The Best Place to Live in the U.S." by U.S. News and World Report - the Texas Institute for Electronics embodies the city's innovative spirit. UT Austin, recognized by Forbes as one of ___, provides outstanding ___ and ___ packages that include: * Competitive health benefits (employee premiums covered at 100%, family premiums at 50%) * Voluntary Vision, Dental, Life, and Disability insurance options * Generous paid vacation, sick time, and holidays * Teachers Retirement System of Texas, a defined benefit retirement plan, with employer matching funds * Additional Voluntary Retirement Programs: Tax Sheltered Annuity 403(b) and a Deferred Compensation program 457(b) * Flexible spending account options for medical and childcare expenses * Robust free training access through LinkedIn Learning plus professional conference opportunities * Tuition assistance * Expansive employee discount program including athletic tickets * Free access to UT Austin's libraries and museums with staff ID card * Free rides on all UT Shuttle and Austin CapMetro buses with staff ID card For more details, please see: ___ and ___ This role is to lead and execute comprehensive Signal Integrity (SI), Power Integrity (PI), and Multiphysics simulations for advanced 2.5D/3.0D heterogeneous integration and multi-material packages. The position will also collaborate with EDA vendors, OSATs, and foundries, and stay current with next-gen interface standards to guide technical strategy and mentor junior engineers. • Own and execute hands-on SI/PI and Multiphysics simulations for advanced 2.5D/3.0D heterogeneous integration and multi-material packages., • Perform modeling, extraction, and verification of high-speed interconnects, power delivery networks, thermal management, and mechanical stress across chiplets and advanced substrates., • Build and validate comprehensive ADK/PDK models (electrical, EM, thermal, mechanical) that accurately represent package-level behavior and enable system-level co-design., • Run end-to-end simulation workflows including EM extraction, S-parameter generation, PDN impedance analysis, crosstalk/eye diagram simulations, thermal/structural reliability checks, and co-simulation across domains., • Collaborate directly with EDA vendors (Cadence, Ansys, Synopsys, Siemens, Keysight, etc.), OSATs, and foundries to develop, test, and refine package simulation flows., • Generate user guides, reference flows, scripts, and automation that make SI/PI/multiphysics enablement repeatable and accessible to design teams., • Stay current with next-gen interface standards (PCIe Gen6/7, CXL, UCIe, UALink, SerDes, HBM) and incorporate their requirements into package design methodologies., • Guide technical strategy for SI/PI flows, mentor junior engineers, and represent TIE in working groups, customer design reviews, and industry forums., • Other related functions as assigned., • BS in Electrical Engineering, Computer Engineering, Applied Physics, or related discipline., • 8 or more years of direct, hands-on experience in signal integrity, power integrity, and multiphysics simulations for advanced packaging, 2.5D/3DIC, or heterogeneous integration platforms., • 12 or more years of direct, hands-on experience in signal integrity, power integrity, and multiphysics simulations for advanced packaging, 2.5D/3DIC, or heterogeneous integration platforms. For both titles:, • Strong expertise with EDA/EM/multiphysics tools: Ansys HFSS/SIwave, Cadence Sigrity/Clarity, Synopsys RaptorX, Siemens HyperLynx, Keysight ADS, COMSOL, CST Studio., • Proven ability to extract/package-level models (RLC, S-parameters, dielectric/thermal constants, warpage/stress data) and integrate them into design enablement flows., • Demonstrated experience creating and validating PDK/ADK simulation collateral spanning SI/PI, RF, thermal, and mechanical domains., • Hands-on scripting/automation skills (Python, Tcl, SKILL, etc.) to streamline simulation flows., • Startup DNA. You're energized by ambiguity, act with urgency, and take personal ownership for outcomes. You make things happen., • Execution mindset. You have demonstrated experience working in a hands-on role driving progress across multiple initiatives without layers of management., • Location. Austin, Texas is preferred for close collaboration with our engineering teams and partners. Hybrid work arrangements may be possible with travel up to 30-50%. Such arrangements are subject to University review and approval in relation to jurisdictional employment-related laws, rules, and regulations. Relevant education and experience may be substituted as appropriate. • MS or PhD in Electrical Engineering, Applied Physics, or related discipline., • Deep experience with multi-material packages (Si, glass, organics, Cu, RDL, TSV, hybrid bonding, etc.)., • Expertise in system-level co-simulation spanning electrical, thermal, and mechanical domains for high-power/high-bandwidth-density packages., • Familiarity with industry standards (IEEE, JEDEC, OIF, UCIe, 3Dblox, JEP30) and experience contributing to working groups., • Background in high-speed interconnect modeling and compliance testing for PCIe, CXL, UCIe, SerDes, HBM, or similar standards., • Track record of technical publications, patents, or open-source contributions in SI/PI/multiphysics simulation and design enablement. TIE Pays Industry Competitive Salaries • May work in all weather conditions, • May work in extreme temperatures, • May work around chemical fumes, • Climbing of stairs, • Climbing of ladders, • Lifting and moving 30 pounds, • Monday - Friday 8am to 5pm, • Occasional/frequent nights/weekends required, • Resume/CV, • 3 work references with their contact information; at least one reference should be from a supervisor, • Letter of interest Importantfor applicants who are NOT current university employees or contingent workers:You will be prompted to submit your resume the first time you apply, then you will be provided an option to upload a new Resume for subsequent applications. Any additional Required Materials (letter of interest, references, etc.) will be uploaded in the Application Questions section; you will be able to multi-select additional files. Before submitting your online job application, ensure thatALLRequired Materials have been uploaded. Once your job application has been submitted, you cannot make changes. Important for Current university employees and contingent workers:As a current university employee or contingent worker, you MUST apply within Workday by searching for Find UT Jobs. If you are a current University employee, log-in to Workday, navigate to your Worker Profile, click the Career link in the left hand navigation menu and then update the sections in your Professional Profile before you apply. This information will be pulled in to your application. The application is one page and you will be prompted to upload your resume. In addition, you must respond to the application questionspresented to upload any additional Required Materials (letter of interest, references, etc.) that were noted above. Employment Eligibility: Regular staff who have been employed in their current position for the last six continuous months are eligible for openings being recruited for through University-Wide or Open Recruiting, to include both promotional opportunities and lateral transfers. Staff who are promotion/transfer eligible may apply for positions without supervisor approval. Retirement Plan Eligibility: The retirement plan for this position is Teacher Retirement System of Texas (TRS), subject to the position being at least 20 hours per week and at least 135 days in length. This position has the option to elect the Optional Retirement Program (ORP) instead of TRS, subject to the position being 40 hours per week and at least 135 days in length. Background Checks: A criminal history background check will be required for finalist(s) under consideration for this position. Equal Opportunity Employer: The University of Texas at Austin, as an ___,complies with all applicable federal and state laws regarding nondiscrimination and affirmative action. The University is committed to a policy of equal opportunity for all persons and does not discriminate on the basis of race, color, national origin, age, marital status, sex, sexual orientation, gender identity, gender expression, disability, religion, or veteran status in employment, educational programs and activities, and admissions. Pay Transparency: The University of Texas at Austin will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information. Employment Eligibility Verification: If hired, you will be required to complete the federal Employment Eligibility Verification I-9 form. You will be required to present acceptable and original ___ to prove your identity and authorization to work in the United States. Documents need to be presented no later than the third day of employment. Failure to do so will result in loss of employment at the university. E-Verify: The University of Texas at Austin use E-Verify to check the work authorization of all new hires effective May 2015. The university's company ID number for purposes of E-Verify is 854197. For more information about E-Verify, please see the following: • ___ [PDF], • ___ [PDF], • ___ [PDF] Compliance: Employees may be required to report violations of law under Title IX and the Jeanne Clery Disclosure of Campus Security Policy and Crime Statistics Act (Clery Act). If this position is identified a Campus Security Authority (Clery Act), you will be notified and provided resources for reporting. Responsible employees under Title IX are defined and outlined in ___. The Clery Act requires all prospective employees be notified of the availability of the Annual Security and Fire Safety report. You may ___ or obtain a copy at University Compliance Services, 1616 Guadalupe Street, UTA 2.206, Austin, Texas 78701.

Job Posting Title: Senior Software Engineer, Texas Institute for Electronics Hiring Department: Texas Institute for Electronics Position Open To: All Applicants Weekly Scheduled Hours: 40 FLSA Status: To Be Determined at Offer Earliest Start Date: Ongoing Position Duration: Expected to Continue Location: AUSTIN, TX Job Details: About Us The___is a University of Texas at Austin-supported semiconductor consortium of state and local government, preeminent defense electronics and semiconductor companies, national labs and nationally recognized academic institutions. Our mission is to develop and execute a state-of-the-art 3D Heterogenous Integration manufacturing technology roadmap, and to provide critical pilot manufacturing capabilities to address national security needs and catalyze domestic economic growth. Join the Texas Institute for Electronics (TIE) and help us push the boundaries in critical semiconductor domains, including advanced packaging, with the aim of reestablishing U.S. prominence in semiconductor manufacturing. With over $1 billion in funding from the US DoD and the state of Texas, we're at the forefront of creating cutting-edge semiconductor manufacturing equipment and processes that will set the course for future advancements in semiconductor logic, memory, heterogeneous integration, chip cooling and more. Situated in the heart of Austin - named "America's Coolest City" by Expedia and "The Best Place to Live in the U.S." by U.S. News and World Report - the Texas Institute for Electronics embodies the city's innovative spirit. UT Austin, recognized by Forbes as one of ___, provides outstanding ___ and ___ packages that include: • Competitive health benefits (employee premiums covered at 100%, family premiums at 50%), • Voluntary Vision, Dental, Life, and Disability insurance options, • Generous paid vacation, sick time, and holidays, • Teachers Retirement System of Texas, a defined benefit retirement plan, with 8.25% employer matching funds, • Additional Voluntary Retirement Programs: Tax Sheltered Annuity 403(b) and a Deferred Compensation program 457(b), • Flexible spending account options for medical and childcare expenses, • Robust free training access through LinkedIn Learning plus professional conference opportunities, • Tuition assistance, • Expansive employee discount program including athletic tickets, • Free access to UT Austin's libraries and museums with staff ID card, • Free rides on all UT Shuttle and Austin CapMetro buses with staff ID card, • For more details, please see ___ and ___ and ___ Must be eligible to work in the United States on a full-time basis for any employer without sponsorship. The Senior Software Engineer will lead and contribute to software and controls development for advanced semiconductor manufacturing equipment and processes. This role emphasizes innovation in areas such as logic, memory, heterogeneous integration, chip cooling, and image processing technologies. • Lead software development for novel semiconductor manufacturing equipment, including control systems and automation software, • Design and implement software for image processing and computer vision applications in semiconductor inspection and metrology, • Collaborate with cross-functional teams to integrate hardware and software subsystems, • Develop and maintain software requirements, architecture, and documentation, • Support procurement and evaluation of equipment sub-systems, • Participate in research and development activities to advance semiconductor manufacturing capabilities, • Other related functions as assigned, • Bachelor's degree in Computer Science, Electrical Engineering, or a related discipline, • Minimum of 5 years of experience in software engineering or related fields, • Proficiency in programming languages such as C, C++, Python, and MATLAB, • Experience with control and simulation tools such as Simulink, • Strong understanding of software architecture, object-oriented programming, build systems, and version control, • Demonstrated experience with software requirements and specifications, • Hands-on experience with image processing or computer vision algorithms and tools, • Excellent written and verbal communication skills, • Master's degree or higher in a relevant technical field, • Experience in research or start-up environments, • Prior experience in software development for hardware control and instrumentation, • Experience with image processing libraries (e.g., OpenCV, MATLAB Image Processing Toolbox), • Familiarity with machine vision systems used in semiconductor or high-tech manufacturing, • Experience developing real-time or embedded software systems TIE Pays Industry-Competitive Salaries • Work is performed on-site in a scientific research environment, with dynamic work conditions and frequent interruptions., • May work around standard office conditions, • Repetitive use of a keyboard at a workstation, • Use of manual dexterity (ex: using a mouse), • Monday - Friday, flexible between 7am and 6pm, • Work outside standard office hours could be required on an occasional basis during peak periods and special events., • Resume/CV, • 3 work references with their contact information; at least one reference should be from a supervisor, • Letter of interest (optional) Importantfor applicants who are NOT current university employees or contingent workers:You will be prompted to submit your resume the first time you apply, then you will be provided an option to upload a new Resume for subsequent applications. Any additional Required Materials (letter of interest, references, etc.) will be uploaded in the Application Questions section; you will be able to multi-select additional files. Before submitting your online job application, ensure thatALLRequired Materials have been uploaded. Once your job application has been submitted, you cannot make changes. Important for Current university employees and contingent workers:As a current university employee or contingent worker, you MUST apply within Workday by searching for Find UT Jobs. If you are a current University employee, log-in to Workday, navigate to your Worker Profile, click the Career link in the left hand navigation menu and then update the sections in your Professional Profile before you apply. This information will be pulled in to your application. The application is one page and you will be prompted to upload your resume. In addition, you must respond to the application questionspresented to upload any additional Required Materials (letter of interest, references, etc.) that were noted above. Employment Eligibility: Regular staff who have been employed in their current position for the last six continuous months are eligible for openings being recruited for through University-Wide or Open Recruiting, to include both promotional opportunities and lateral transfers. Staff who are promotion/transfer eligible may apply for positions without supervisor approval. Retirement Plan Eligibility: The retirement plan for this position is Teacher Retirement System of Texas (TRS), subject to the position being at least 20 hours per week and at least 135 days in length. This position has the option to elect the Optional Retirement Program (ORP) instead of TRS, subject to the position being 40 hours per week and at least 135 days in length. Background Checks: A criminal history background check will be required for finalist(s) under consideration for this position. Equal Opportunity Employer: The University of Texas at Austin, as an ___,complies with all applicable federal and state laws regarding nondiscrimination and affirmative action. The University is committed to a policy of equal opportunity for all persons and does not discriminate on the basis of race, color, national origin, age, marital status, sex, sexual orientation, gender identity, gender expression, disability, religion, or veteran status in employment, educational programs and activities, and admissions. Pay Transparency: The University of Texas at Austin will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information. Employment Eligibility Verification: If hired, you will be required to complete the federal Employment Eligibility Verification I-9 form. You will be required to present acceptable and original ___ to prove your identity and authorization to work in the United States. Documents need to be presented no later than the third day of employment. Failure to do so will result in loss of employment at the university. E-Verify: The University of Texas at Austin use E-Verify to check the work authorization of all new hires effective May 2015. The university's company ID number for purposes of E-Verify is 854197. For more information about E-Verify, please see the following: • ___ [PDF], • ___ [PDF], • ___ [PDF] Compliance: Employees may be required to report violations of law under Title IX and the Jeanne Clery Disclosure of Campus Security Policy and Crime Statistics Act (Clery Act). If this position is identified a Campus Security Authority (Clery Act), you will be notified and provided resources for reporting. Responsible employees under Title IX are defined and outlined in ___. The Clery Act requires all prospective employees be notified of the availability of the Annual Security and Fire Safety report. You may ___ or obtain a copy at University Compliance Services, 1616 Guadalupe Street, UTA 2.206, Austin, Texas 78701.

Job Posting Title: CAD/EDA Engineer I, CAD/EDA Engineer II, Senior CAD/EDA Engineer, Texas Institute for Electronics Hiring Department: Texas Institute for Electronics Position Open To: All Applicants Weekly Scheduled Hours: 40 FLSA Status: Exempt Earliest Start Date: Immediately Position Duration: Expected to Continue Location: PICKLE RESEARCH CAMPUS Job Details: The ___ is a public-private partnership of preeminent semiconductor systems and defense electronics companies, national labs, and academic institutions. Our mission is to advance the state-of-the-art in critical semiconductor domains such as advanced packaging, and in the process to help restore U.S. leadership in semiconductor manufacturing. We are developing cutting-edge semiconductor manufacturing equipment and processes that will define future roadmaps of semiconductor logic, memory, heterogenous integration, chip cooling, etc. We are seeking a number of motivated individuals to join our team and help us in achieving the above goals. TIE is part of the ___ at The University of Texas at Austin (UT Austin), a global leader in technology innovation and engineering education for over a century. With 11 undergraduate and 13 graduate programs, over 20 research centers and a faculty community that boasts one of the highest number of National Academy of Engineering members among U.S. universities, Texas Engineering has launched some of the nation's most accomplished leaders and pioneered world-changing solutions in virtually every industry, from space exploration to energy to health care. Situated in the heart of Austin - named "America's Coolest City" by Expedia and "The Best Place to Live in the U.S." by U.S. News and World Report - the Cockrell School embodies the city's innovative spirit. Major companies with Austin campuses, such as Dell, National Instruments, Apple, IBM, Samsung, Google, Tesla, and many others, continue to recruit Cockrell School students at a remarkable rate, launching thousands of successful careers and developing Texas Engineers into industry leaders. At UT Austin, we say "What starts here changes the world." As a member of the university community, you will be part of an organization that is internationally recognized for our academic programs and research. Your work will have meaning and make a difference not only in the lives of our faculty, staff, and students, but also those who are impacted by our first class academic and research programs. UT Austin, recognized by Forbes as one of ___, provides outstanding ___ and ___ packages that include: * Competitive health benefits (employee premiums covered at 100%, family premiums at 50%) * Voluntary Vision, Dental, Life, and Disability insurance options * Generous paid vacation, sick time, and holidays * Teachers Retirement System of Texas, a defined benefit retirement plan, with 7.75% employer matching funds * Additional Voluntary Retirement Programs: Tax Sheltered Annuity 403(b) and a Deferred Compensation program 457(b) * Flexible spending account options for medical and childcare expenses * Robust free training access through LinkedIn Learning plus professional conference opportunities * Tuition assistance * Expansive employee discount program including athletic tickets * Free access to UT Austin's libraries and museums with staff ID card * Free rides on all UT Shuttle and Austin CapMetro buses with staff ID card Multiple vacancies available. This position may be filled at a higher-level title, relative to the experience and qualifications of the selected candidate. Applicants must be authorized to work in the United States on a full-time basis for any employer without sponsorship. Relocation assistance may be available. We are bringing advanced semiconductor 3DHI packaging/manufacturing back to the USA and looking for motivated individuals to join our team. Implement automation and workflows for custom integrated circuit design and 3DHI modeling across the wide range of EDA IC design tools. Develop and maintain automation scripts in Linux environments, as well as Windows applications. Define design flows andprovide user support for TIE's Assembly Design Kits (ADK's), while helping to ensure interoperability with our partner PDK's. Work closely with EDA vendors and our internal Design and Processes engineering teams to develop and define TIE's preferred tool sets that will enable 3DHI system design for our potential customer base and our internal design/modeling teams. Senior positions will help set TIE's overall EDA/Design methodologies and process strategies. • Create and maintain scripts/automation to assure compatibility and integration with wide range of EDA IC design/modeling tools to enable simulation/emulation, physical verification, parasitic extraction, and 3DHI modeling., • Help develop, deploy, and maintain TIE's ADK (Assembly Design Kits)., • Maintain interoperability and compatibility of TIE's design kits with our partner PDK's, our internal PDK's & ADK's, and vendor EDA tool revisions., • Developing innovative physical design place & route methodology and flow solutions to meet current and future design challenges., • Help establish and validate physical design methodologies, flow automation and infrastructure for our internal 3D heterogenous micro-system modeling teams., • Automation of Test structure layouts to help drive next generation processing capabilities across a wide range of materials., • Support TIE's standard cell offerings and drive validation/simulation/emulation capability around those standard cells., • Facilitate and oversee project tapeouts., • Providing technical leadership, mentoring and customer support for our internal design and 3D modeling teams., • CAD/EDA Engineer I: Bachelor's degree in Electrical Engineering, Computer Science or closely related field., • CAD/EDA Engineer II: Bachelor's degree in Electrical Engineering, Computer Science or closely related field, Minimum of three years industry experience., • Senior CAD/EDA Engineer: Bachelor's degree in Electrical Engineering, Computer Science or closely related field, Minimum of ten years industry experience., • Experience in developing and customizing high performance semiconductor IC design, layout, & validation flows using industry-standard EDA tools ( Cadence, Synopsys, Ansys, Siemens...), • Excellent UNIX and scripting programming skills (Perl, Python, TCL or similar languages)., • Experience with software build automation and version control software., • Proficiency in both Linux and Windows environments., • Prior CAD support experience in semiconductor IC design, including oversight of product tapeouts., • Strong teamwork, collaboration, and communication abilities, with the ability to contribute to company-wide consensus on design flows, tools, and methodologies., • Ability to thrive in a fast-paced environment and manage multiple projects simultaneously. Relevant education and/or industry experience may be substituted as appropriate. • Master's or advanced degree in semiconductor engineering fields such as Electrical Engineering, Computer Science, or other relevant disciplines., • Previous experience in setting up and facilitating Design environments and maintaining design kit operability and coordination for cross functional design, modeling, and/or layout teams., • Previous experience integrating PDK and/or ADK's to enable 2.5D or 3D SoC's., • Experience evaluating EDA tool capabilities driving EDA vendors to make tool improvements or enable new functions to meet advanced or unique design requirements., • Experience in a startup or research and development (R&D) environment. TIE Pays Industry Competitive Salaries • Work is performed on-site in a scientific research environment and prototyping facility with dynamic work conditions collaborating simultaneously with many partners/customers in parallel., • Work outside standard office hours could be required on an occasional basis during peak periods and special events., • Resume/CV, • 3 work references with their contact information; at least one reference should be from a supervisor, • Letter of interest Important for applicants who are NOT current university employees or contingent workers: You will be prompted to submit your resume in the first step of the online job application process. Then, any additional Required Materials will be uploaded in the My Experience section; you can multi-select the additional files or click the Upload button for each file. Before submitting your online job application, ensure thatALLRequired Materials have been uploaded. Once your job application has been submitted, you cannot make changes. Important for Current university employees and contingent workers: As a current university employee or contingent worker, you MUST apply within Workday by searching for Find Jobs. Before you apply though, log-in to Workday, navigate to your Worker Profile, click the Career link in the left hand navigation menu and then update the sections in your Professional Profile. This information will be pulled in to your application. The application is one page and you will need to click the Upload button multiple times in order to attach your Resume, References and any additional Required Materials noted above. Employment Eligibility: Regular staff who have been employed in their current position for the last six continuous months are eligible for openings being recruited for through University-Wide or Open Recruiting, to include both promotional opportunities and lateral transfers. Staff who are promotion/transfer eligible may apply for positions without supervisor approval. Retirement Plan Eligibility: The retirement plan for this position is Teacher Retirement System of Texas (TRS), subject to the position being at least 20 hours per week and at least 135 days in length. Background Checks: A criminal history background check will be required for finalist(s) under consideration for this position. Equal Opportunity Employer: The University of Texas at Austin, as an ___,complies with all applicable federal and state laws regarding nondiscrimination and affirmative action. The University is committed to a policy of equal opportunity for all persons and does not discriminate on the basis of race, color, national origin, age, marital status, sex, sexual orientation, gender identity, gender expression, disability, religion, or veteran status in employment, educational programs and activities, and admissions. Pay Transparency: The University of Texas at Austin will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information. Employment Eligibility Verification: If hired, you will be required to complete the federal Employment Eligibility Verification I-9 form. You will be required to present acceptable and original ___ to prove your identity and authorization to work in the United States. Documents need to be presented no later than the third day of employment. Failure to do so will result in loss of employment at the university. E-Verify: The University of Texas at Austin use E-Verify to check the work authorization of all new hires effective May 2015. The university's company ID number for purposes of E-Verify is 854197. For more information about E-Verify, please see the following: • ___ [PDF], • ___ [PDF], • ___ [PDF] Compliance: Employees may be required to report violations of law under Title IX and the Jeanne Clery Disclosure of Campus Security Policy and Crime Statistics Act (Clery Act). If this position is identified a Campus Security Authority (Clery Act), you will be notified and provided resources for reporting. Responsible employees under Title IX are defined and outlined in ___. The Clery Act requires all prospective employees be notified of the availability of the Annual Security and Fire Safety report. You may ___ or obtain a copy at University Compliance Services, 1616 Guadalupe Street, UTA 2.206, Austin, Texas 78701.

Principal Thermal Controls Engineer Thermal Engineering leads and delivers the development of innovative and compliant thermal design solutions, as well as cross-functional interfaces for computer systems and peripherals. Our team conducts the analysis, feasibility studies and testing of thermal products, instruments, subassemblies and packaging for new and existing products – and then oversees the introduction of design changes to the manufacturing organizations. As AI growth is accelerating, Dell Technologies is developing ground-breaking technologies and customer-focused solutions to lead the industry. We're developing best-in class networking, storage, infrastructure, and server products to serve AI, Cloud, High Performance Computing (HPC), Edge and Enterprise workloads. Join us to do the best work of your career and make a profound social impact as a Principal Thermal Controls Engineer on our Thermal Engineering team in Austin, Texas What you'll achieve Dell Technologies is seeking a Principal Thermal Controls Engineer to define and architect next-generation thermal control strategies that enable efficient, reliable cooling for Dell's most advanced platforms. This role leads development of thermal control algorithms, simulation using Simulink, and definition of firmware requirements guiding BMC/embedded firmware teams. A strong preference will be given to candidates capable of driving digital-thread workflows and leveraging automation or AI tools to generate, validate, and optimize thermal control data. You will: • Architect next-generation thermal control strategies for Dell PowerEdge servers, storage, AI/HPC, telco, and rack-level platforms, enabling efficient, reliable, and acoustically optimized cooling, • Develop advanced, model-based control algorithms using Simulink to manage fans, pumps, cold plates, and power-thermal interactions across air and liquid cooling systems, • Lead simulation-driven design by building thermal system models and running scenario-based analyses to tune algorithms, predict edge cases, and define platform requirements ahead of hardware availability, • Define firmware requirements and interfaces for thermal sensing, telemetry, and control, and partner closely with BMC/embedded firmware teams to ensure accurate implementation, • Drive digital thread and automation initiatives, leveraging AI-assisted tools to generate and optimize thermal control parameters while serving as a technical authority and mentor across product lines Take the first step towards your dream career Every Dell Technologies team member brings something unique to the table. Here's what we are looking for with this role: Essential Requirements • 8+ years of experience in thermal controls, systems controls, or related engineering disciplines, with strong domain knowledge of server, storage, or HPC platform architectures, • Expert in model-based thermal control development, including Simulink and MBSE techniques to link simulation, controls, firmware, and validation workflows, • Deep understanding of thermal and cooling systems, including air and liquid architectures, fans, pumps, sensors, and thermal management components, • Experience with embedded/BMC firmware integration, including Redfish, IPMI, sensor interfaces, and the ability to author clear, detailed firmware requirements and collaborate closely with firmware teams, • Proven technical leadership and communication skills, with experience driving digital thread initiatives and using automation, scripting, or AI-based tools to generate and validate thermal control parameter tables Desired Skills • Familiarity with model-based systems engineering and advanced thermal control methods, such as PID, adaptive or AI-assisted controls, state-machine modeling, and using CFD or thermal simulation insights to inform control strategies for high-power, air- or liquid-cooled systems, • Exposure to digital thread concepts and platform-level control strategy, including linking simulation, controls, firmware, and validation workflows, as well as using automation, scripting, or AI-based tools to help generate, validate, or optimize thermal control parameters and support architectural decisions Compensation Dell is committed to fair and equitable compensation practices. The base salary range for this position is $144,500-$187,000. Benefits and Perks of working at Dell Technologies Your life. Your health. Supported by your benefits. You can explore the overall benefits experience that awaits you as a Dell Technologies team member — right now at ___ Who we are We believe that each of us has the power to make an impact. That's why we put our team members at the center of everything we do. If you're looking for an opportunity to grow your career with some of the best minds and most advanced tech in the industry, we're looking for you. Dell Technologies is a unique family of businesses that helps individuals and organizations transform how they work, live and play. Join us to build a future that works for everyone because Progress Takes All of Us. Dell Technologies is committed to the principle of equal employment opportunity for all employees and to providing employees with a work environment free of discrimination and harassment. Read the full Equal Employment Opportunity Policy ___ Job ID:R287059

Principal Engineer, Solutions Architect – Liquid Cooling (RDHx & CDU Systems) When our customers are looking for consultative IT expertise, where else would they turn but to the company driving human progress through technology? Our Solutions Architecture team within Professional Services are specialists in package customization and integration as well as total, end-to-end solutions in targeted industry segments. After detailed consultation with our customers and careful analysis, we develop new IT systems or replace existing systems that support customers' strategic, operational and financial goals. Join us to do the best work of your career and make a profound social impact as a Principal Engineer, Solutions Architect – Liquid Cooling (RDHx & CDU Systems) on our Solutions Architecture Team in Austin, Texas. Or Remote United States Ability to travel to customer locations) What you'll achieve We are seeking a Senior Solutions Architect (SA) specializing in Data Center Liquid Cooling, with emphasis on rear-door heat exchangers (RDHx) and cooling distribution units (CDUs). This is a new capability within our organization, and you will serve as our primary expert in liquid-based thermal solutions for high-density compute environments. In this post-sales architecture role, you will work directly with customers to understand their requirements, design full liquid cooling solutions, support field teams during deployments, and help shape our internal best practices around liquid cooling technologies. You will: Customer Engagement & Post-Sales Architecture • Lead technical discovery sessions with customers to gather thermal, environmental, mechanical, and operational requirements, • Design end-to-end liquid cooling solutions featuring rear-door heat exchangers, CDUs, manifolds, hoses, fittings, and facility water loop considerations, • Produce detailed solution designs including schematics, BOMs, system flow diagrams, thermal performance expectations, and installation guidelines, • Support field engineering teams during installation, commissioning, and validation of RDHx and CDU systems, • Provide technical oversight on-site or remotely, ensuring the deployed system aligns with the approved design, • Troubleshoot flow rates, pressure drops, temperature deltas, coolant quality, sensor behavior, and CDU operational parameters, • Serve as the internal authority on liquid cooling within engineering, operations, sales, and product, • Develop internal documentation: reference architectures, best practices, safety guidelines, and deployment playbooks, • Train field teams and adjacent groups unfamiliar with liquid cooling practices, • Define standards and repeatable processes for liquid cooling implementations., • Contribute to service offerings that support deployment, maintenance, and ongoing optimization of liquid cooling systems Essential Requirements • 7+ years in data center infrastructure, solutions architecture, mechanical/thermal engineering, or HPC environments, • Hands-on experience with:, • Rear-door heat exchangers (enclosed or active systems), • Cooling Distribution Units (CDUs), Secondary Fluids Network (SFN) design and fabrication, • Coolant loop design, manifolds, flexible hose routing, connectors, drip-less fittings, sensors, etc., • Rack and system level liquid cooling technologies, including multiple cooling loops, and direct-to-chip cooling, • Strong understanding of:, • Heat transfer, thermodynamics, and fluid mechanics, • Facility water loops and integration points, • Flow balancing, delta-T analysis, and pump performance curves, • Leak detection and safety best practices, • Familiarity with data center power/cooling concepts (rack-level thermals, airflow management). Architecture & Customer-Facing Skills • Experience conducting customer requirement gathering and converting needs into detailed solution architectures, • Ability to write clear architectural documentation, diagrams, and BOMs, • Comfort supporting deployments hands-on and resolving technical issues in the field, • Ability to travel to customer's locations1 Soft Skills • Excellent communication and customer engagement skills, • Ability to simplify complex engineering topics for non-technical audiences, • Self-starter comfortable defining processes and building practice maturity, • Working cross-functionally across different teams Desirable Requirements • Bachelor's degree or higher in Mechanical Engineering, Thermal Engineering, or similar field, • Proficiency with Thermal Simulation tools (ANSYS Icepak, FloTHERM, FloEFD, ANSYS Mechanical), • Experience with high-density compute environments (AI/ML, HPC, GPU racks), • Data center-related certifications (CDCP, CDCS, DCEP Generalist, DCEP-HVAC Specialist etc.), • Familiarity with RDHx and CDU vendors such as Vertiv, Schneider Electric, Motivair, Liebert, Rittal, nVent, CoolIT, etc., • Knowledge of monitoring and control systems (Modbus, BACnet, SNMP, CDU controllers) Compensation: Dell is committed to Fair and Equitable compensation practices. The Base Salary Range for this role is $170,850 to $ 221,100. Benefits and Perks of working at Dell Technologies Your life. Your health. Supported by your benefits. You can explore the overall benefits experience that awaits you as a Dell Technologies team member — right now at ___ Who we are We believe that each of us has the power to make an impact. That's why we put our team members at the center of everything we do. If you're looking for an opportunity to grow your career with some of the best minds and most advanced tech in the industry, we're looking for you. Dell Technologies is a unique family of businesses that helps individuals and organizations transform how they work, live and play. Join us to build a future that works for everyone because Progress Takes All of Us. Dell Technologies is committed to the principle of equal employment opportunity for all employees and to providing employees with a work environment free of discrimination and harassment. Read the full Equal Employment Opportunity Policy ___ Job ID:R286406

Electrical Engineer Power Systems Join us as a Electrical Engineer Power Systems on our Concept Engineering team in Hopkinton, MA or Round Rock, TX to do the best work of your career and make a profound social impact. Dell’s Concept Engineering organization is responsible for exploring the boundaries of next‑generation datacenter and AI server architectures. Our cross‑functional team develops early‑phase designs, proof‑of‑concept systems, and technology demonstrations that influence Dell’s long-term product strategy. We work at the intersection of electrical, mechanical, thermal, and system architecture to define what comes next. What you’ll achieve We are seeking a highly experienced Electrical Engineer specializing in high‑current and high‑voltage power distribution . If you have designed power distribution systems for demanding environments—such as electric vehicles, industrial power systems, high‑density compute platforms, or advanced energy storage—this role will leverage your deep expertise. You will architect and design high-current DC bus bars, power shelves, HV/LV distribution networks, and high‑power PCB assemblies that support the next generation of AI compute platforms and datacenter rack-level architectures. This is an early‑concept role: you will explore new technologies, build prototypes, evaluate new materials, and guide system‑level decisions long before products enter development. You will: * Lead the design, architecture, and analysis of high‑current, low‑voltage DC power‑distribution systems (1 kW–100 kW+) for AI server and rack‑scale platforms, including bus bars, high‑power PCBAs, and early‑phase power‑delivery concepts * Develop rack‑level power‑delivery components such as power shelves and battery interfaces, creating system‑level topologies focused on safety, thermal performance, and electrical integrity * Perform advanced simulations for current density, thermal behavior, electromagnetic/inductive/resistive effects, isolation/creepage/clearance, and EMI/EMC in high‑current applications * Collaborate cross‑functionally with mechanical, thermal, and architecture teams to deliver manufacturable, scalable designs and support rapid prototyping, bring‑up, and early validation * Document designs, drive trade studies, stay current on materials/connector technologies, and contribute to product strategy for next‑generation AI server power‑delivery platforms Essential Requirements * Bachelor’s or Master’s degree in Electrical Engineering (or related field) with 10+ years of experience in high‑power electrical system design across EV power paths, industrial/UPS systems, or high‑current DC/HV distribution * Expertise in designing high‑current DC bus bars, power shelves, and high‑power distribution assemblies * Strong experience with high‑current PCB design, including heavy‑copper layouts, embedded bus bars, and >100 Amps trace design * Deep understanding of UL/IEC safety standards, creepage/clearance requirements, and power‑system protection principles * Strong cross‑functional communication skills with the ability to operate effectively in early‑concept, ambiguous design environments Desirable Requirements * Experience with rack‑scale or server‑level power architectures, AI server design constraints (thermal, mechanical, interconnect), and hands‑on work such as rapid prototyping, custom bus‑bar fabrication, or HV system bring‑up * Strong proficiency with simulation tools, including multiphysics solvers (Ansys, COMSOL), SPICE/PLECS for power‑system modeling, and thermal‑analysis tools for high‑current conductors Compensation Dell is committed to fair and equitable compensation practices. The salary range for this position is $221k - $286k. Benefits and Perks of working at Dell Technologies Your life. Your health. Supported by your benefits. You can explore the overall benefits experience that awaits you as a Dell Technologies team member — right now at MyWellatDell.com Who we are We believe that each of us has the power to make an impact. That’s why we put our team members at the center of everything we do. If you’re looking for an opportunity to grow your career with some of the best minds and most advanced tech in the industry, we’re looking for you. Dell Technologies is a unique family of businesses that helps individuals and organizations transform how they work, live and play. Join us to build a future that works for everyone because Progress Takes All of Us. Dell Technologies is committed to the principle of equal employment opportunity for all employees and to providing employees with a work environment free of discrimination and harassment. Read the full Equal Employment Opportunity Policy here . #LI-Onsite Job ID: R287237

Summary The Principal Power Engineer develops new electrical systems/circuits for various applications. Research system ideas and draw up plans for these systems, and capture them in schematics and system specifications. Test, simulate, validate and qualify their systems and make adjustments as needed. Provide support throughout the manufacturing of the electrical systems they have designed. The Principal Power Engineer works in cross functional teams with other designers, customers, manufacturing engineering and project leadership to ensure robust and high quality product development. Enhance designs with feedback from reviews in areas such as manufacturing, test, supply chain, reliability, industrial design and simulations. Detailed Description Performs tasks such as, but not limited to, the following: • Work autonomously and take initiatives to manage team priorities, • Provide technical guidance and support to Staff and Sr. engineers, • Design, develop and implement technical solutions for complex projects. Participate in project planning and scheduling., • Propose innovative solutions for performance, reliability, and features of system or product., • Global SME with comprehensive knowledge and industry recognition. Provides technical leadership and direction to a global team of engineers., • Reviews and interprets customer specifications and may act as primary customer contact., • Analyze trade-offs in complex systems and recommend solutions. Develop and lead deployment strategies and plans., • Lead and manage schematic design, Bills of material, power tree, drawings, board layout, and cross-functional design reviews, • Lead power bring-up, debugging, and support for manufacturing assembly, and deployment, • Takes responsibility for non-technical elements of an engineering project (people, financials etc.), • Lead relationships with key vendors and partners., • Keep up to date with relevant industry knowledge and regulations, and share within team, • Liaison with suppliers, customers, contractors, and other internal teams., • Analyze and create reports and documentation of specifications, design, testing, debugging, and etc., • May be a recognized expert (go to person) in one or more technical areas. Knowledge/Skills/Competencies • Considered a Subject Matter Expert in the area of power design, such as single/multi-phase DC/DC converter, point-of-load converter, LDO, MOSFETs, magnetics, hot-swap circuitry of how-swap controller, load switches, current sense circuit and amplifier, and etc, • Experienced in designing power systems for networking, compute, or storage products, • Experienced in high-current, low-voltage power subsystems for CPU, GPU, ASIC, SoC, and FPGA, • Experienced in PCB stack-up, power planes, and tools used to simulate voltage gradients, • Familiar with schematic capture and CAD layout tools or equivalent ones, • Proficient with circuit simulation tools such as SIMPLIS, PSPICE, and LTSPICE, or equivalent tools, • Experienced with end-to-end power delivery network design, and simulation using circuit simulation tools, Sigrity PowerDC/SI, ANSYS SIWave or equivalent, and board level correlation, • Knowledge of high-density power modules and Vertical Power Delivery (Knowledge on Integrated Voltage Regulator (IVR) is a plus), • Experienced with power integrity evaluation, • Experienced with design and troubleshooting of power management interfaces such as PMBus, AVS, SVID and SVI2/3., • Experienced with defining specifications and validation of power connectors, cable assemblies and fuses, • Familiar with NPI hardware design and deployment cycle, • Experienced with development of test automation for power validation that is a plus., • Excellent verbal and written communication skills, and ability to present to various audiences effectively Physical Demands • Duties of this position are performed in a normal office environment., • Duties may require extended periods of sitting and sustained visual concentration on a computer monitor or on numbers and other detailed data., • Repetitive manual movements (e.g., data entry, using a computer mouse, using a calculator, etc.) are frequently required., • Occasional travel may be required. Typical Experience • 11+ years' relevant work experience with 3+ in a leadership capacity. Typical Education • Bachelor degree or consideration of an equivalent combination of education and experience., • Educational Requirements may vary by Geography

Qualcomm Technologies, Inc. Engineering Group, Engineering Group > CPU Engineering General Summary: As a Physical Design Clock Engineer, you will work with microarchitecture, RTL design, CAD, block level and top level physical design teams to create best in class clocking solutions for next generation CPUs. * Experience in all aspects of construction and analysis of low skew and low power clock generation and distribution. * Experience in clock H-tree, mesh, spines and CTS implementations. * Good understanding of device physics, RC delay and electrical aspects. * Proficiency in SPICE simulation and analysis for circuit design and verification. * MS in Electrical Engineering; 8+ years of practical experience. * Skilled in chip physical design, standard cell optimizations, and clock construction. * Defined clock methodology across various designs. * Preferred experience in deep submicron process technology nodes. * Proficient in PLL specifications, clock skew estimation, and jitter measurements. * Strong communication skills for team collaboration and issue resolution. * Work with design teams to understand, implement and validate CPU clocking. * Drive overall clock generation and distribution methodology of CPU. * Work with CAD & block level designers to implement the clocking techniques for optimizing skew and power. * Perform jitter analysis and measurements and provide feedback to block level and top level physical design engineers on key fixes required. This position is open to both locations Austin and Santa Clara. The compensations will be adjusted based on the location. Minimum Qualifications: Qualcomm is an equal opportunity employer. If you are an individual with a disability and need an accommodation during the application/hiring process, rest assured that Qualcomm is committed to providing an accessible process. You may e-mail ___ or call Qualcomm's toll-free number found ___. Upon request, Qualcomm will provide reasonable accommodations to support individuals with disabilities to be able participate in the hiring process. Qualcomm is also committed to making our workplace accessible for individuals with disabilities. (Keep in mind that this email address is used to provide reasonable accommodations for individuals with disabilities. We will not respond here to requests for updates on applications or resume inquiries). To all Staffing and Recruiting Agencies: Our Careers Site is only for individuals seeking a job at Qualcomm. Staffing and recruiting agencies and individuals being represented by an agency are not authorized to use this site or to submit profiles, applications or resumes, and any such submissions will be considered unsolicited. Qualcomm does not accept unsolicited resumes or applications from agencies. Please do not forward resumes to our jobs alias, Qualcomm employees or any other company location. Qualcomm is not responsible for any fees related to unsolicited resumes/applications. EEO Employer: Qualcomm is an equal opportunity employer; all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, Veteran status, or any other protected classification. Qualcomm expects its employees to abide by all applicable policies and procedures, including but not limited to security and other requirements regarding protection of Company confidential information and other confidential and/or proprietary information, to the extent those requirements are permissible under applicable law. Pay range and Other Compensation & Benefits: $148,300.00 - $222,500.00 The above pay scale reflects the broad, minimum to maximum, pay scale for this job code for the location for which it has been posted. Even more importantly, please note that salary is only one component of total compensation at Qualcomm. We also offer a competitive annual discretionary bonus program and opportunity for annual RSU grants (employees on sales-incentive plans are not eligible for our annual bonus). In addition, our highly competitive benefits package is designed to support your success at work, at home, and at play. Your recruiter will be happy to discuss all that Qualcomm has to offer – and you can review more details about our US benefits at this ___. If you would like more information about this role, please contact ___.

Principal Engineer, Solutions Architect – Liquid Cooling (RDHx & CDU Systems) When our customers are looking for consultative IT expertise, where else would they turn but to the company driving human progress through technology? Our Solutions Architecture team within Professional Services are specialists in package customization and integration as well as total, end-to-end solutions in targeted industry segments. After detailed consultation with our customers and careful analysis, we develop new IT systems or replace existing systems that support customers' strategic, operational and financial goals. Join us to do the best work of your career and make a profound social impact as a Principal Engineer, Solutions Architect – Liquid Cooling (RDHx & CDU Systems) on our Solutions Architecture Team in Austin, Texas. Or Remote United States Ability to travel to customer locations) What you'll achieve We are seeking a Senior Solutions Architect (SA) specializing in Data Center Liquid Cooling, with emphasis on rear-door heat exchangers (RDHx) and cooling distribution units (CDUs). This is a new capability within our organization, and you will serve as our primary expert in liquid-based thermal solutions for high-density compute environments. In this post-sales architecture role, you will work directly with customers to understand their requirements, design full liquid cooling solutions, support field teams during deployments, and help shape our internal best practices around liquid cooling technologies. You will: Customer Engagement & Post-Sales Architecture • Lead technical discovery sessions with customers to gather thermal, environmental, mechanical, and operational requirements, • Design end-to-end liquid cooling solutions featuring rear-door heat exchangers, CDUs, manifolds, hoses, fittings, and facility water loop considerations, • Produce detailed solution designs including schematics, BOMs, system flow diagrams, thermal performance expectations, and installation guidelines, • Support field engineering teams during installation, commissioning, and validation of RDHx and CDU systems, • Provide technical oversight on-site or remotely, ensuring the deployed system aligns with the approved design, • Troubleshoot flow rates, pressure drops, temperature deltas, coolant quality, sensor behavior, and CDU operational parameters, • Serve as the internal authority on liquid cooling within engineering, operations, sales, and product, • Develop internal documentation: reference architectures, best practices, safety guidelines, and deployment playbooks, • Train field teams and adjacent groups unfamiliar with liquid cooling practices, • Define standards and repeatable processes for liquid cooling implementations., • Contribute to service offerings that support deployment, maintenance, and ongoing optimization of liquid cooling systems Essential Requirements • 7+ years in data center infrastructure, solutions architecture, mechanical/thermal engineering, or HPC environments, • Hands-on experience with:, • Rear-door heat exchangers (enclosed or active systems), • Cooling Distribution Units (CDUs), Secondary Fluids Network (SFN) design and fabrication, • Coolant loop design, manifolds, flexible hose routing, connectors, drip-less fittings, sensors, etc., • Rack and system level liquid cooling technologies, including multiple cooling loops, and direct-to-chip cooling, • Strong understanding of:, • Heat transfer, thermodynamics, and fluid mechanics, • Facility water loops and integration points, • Flow balancing, delta-T analysis, and pump performance curves, • Leak detection and safety best practices, • Familiarity with data center power/cooling concepts (rack-level thermals, airflow management). Architecture & Customer-Facing Skills • Experience conducting customer requirement gathering and converting needs into detailed solution architectures, • Ability to write clear architectural documentation, diagrams, and BOMs, • Comfort supporting deployments hands-on and resolving technical issues in the field, • Ability to travel to customer's locations1 Soft Skills • Excellent communication and customer engagement skills, • Ability to simplify complex engineering topics for non-technical audiences, • Self-starter comfortable defining processes and building practice maturity, • Working cross-functionally across different teams Desirable Requirements • Bachelor's degree or higher in Mechanical Engineering, Thermal Engineering, or similar field, • Proficiency with Thermal Simulation tools (ANSYS Icepak, FloTHERM, FloEFD, ANSYS Mechanical), • Experience with high-density compute environments (AI/ML, HPC, GPU racks), • Data center-related certifications (CDCP, CDCS, DCEP Generalist, DCEP-HVAC Specialist etc.), • Familiarity with RDHx and CDU vendors such as Vertiv, Schneider Electric, Motivair, Liebert, Rittal, nVent, CoolIT, etc., • Knowledge of monitoring and control systems (Modbus, BACnet, SNMP, CDU controllers) Compensation: Dell is committed to Fair and Equitable compensation practices. The Base Salary Range for this role is $170,850 to $ 221,100. Benefits and Perks of working at Dell Technologies Your life. Your health. Supported by your benefits. You can explore the overall benefits experience that awaits you as a Dell Technologies team member — right now at MyWellatDell.com Who we are We believe that each of us has the power to make an impact. That's why we put our team members at the center of everything we do. If you're looking for an opportunity to grow your career with some of the best minds and most advanced tech in the industry, we're looking for you. Dell Technologies is a unique family of businesses that helps individuals and organizations transform how they work, live and play. Join us to build a future that works for everyone because Progress Takes All of Us. Dell Technologies is committed to the principle of equal employment opportunity for all employees and to providing employees with a work environment free of discrimination and harassment. Read the full Equal Employment Opportunity Policy here . Job ID: R286406

Principal Thermal Controls Engineer Thermal Engineering leads and delivers the development of innovative and compliant thermal design solutions, as well as cross-functional interfaces for computer systems and peripherals. Our team conducts the analysis, feasibility studies and testing of thermal products, instruments, subassemblies and packaging for new and existing products – and then oversees the introduction of design changes to the manufacturing organizations. As AI growth is accelerating, Dell Technologies is developing ground-breaking technologies and customer-focused solutions to lead the industry. We're developing best-in class networking, storage, infrastructure, and server products to serve AI, Cloud, High Performance Computing (HPC), Edge and Enterprise workloads. Join us to do the best work of your career and make a profound social impact as a Principal Thermal Controls Engineer on our Thermal Engineering team in Austin, Texas What you'll achieve Dell Technologies is seeking a Principal Thermal Controls Engineer to define and architect next-generation thermal control strategies that enable efficient, reliable cooling for Dell's most advanced platforms. This role leads development of thermal control algorithms, simulation using Simulink, and definition of firmware requirements guiding BMC/embedded firmware teams. A strong preference will be given to candidates capable of driving digital-thread workflows and leveraging automation or AI tools to generate, validate, and optimize thermal control data. You will: • Architect next-generation thermal control strategies for Dell PowerEdge servers, storage, AI/HPC, telco, and rack-level platforms, enabling efficient, reliable, and acoustically optimized cooling, • Develop advanced, model-based control algorithms using Simulink to manage fans, pumps, cold plates, and power-thermal interactions across air and liquid cooling systems, • Lead simulation-driven design by building thermal system models and running scenario-based analyses to tune algorithms, predict edge cases, and define platform requirements ahead of hardware availability, • Define firmware requirements and interfaces for thermal sensing, telemetry, and control, and partner closely with BMC/embedded firmware teams to ensure accurate implementation, • Drive digital thread and automation initiatives, leveraging AI-assisted tools to generate and optimize thermal control parameters while serving as a technical authority and mentor across product lines Take the first step towards your dream career Every Dell Technologies team member brings something unique to the table. Here's what we are looking for with this role: Essential Requirements • 8+ years of experience in thermal controls, systems controls, or related engineering disciplines, with strong domain knowledge of server, storage, or HPC platform architectures, • Expert in model-based thermal control development, including Simulink and MBSE techniques to link simulation, controls, firmware, and validation workflows, • Deep understanding of thermal and cooling systems, including air and liquid architectures, fans, pumps, sensors, and thermal management components, • Experience with embedded/BMC firmware integration, including Redfish, IPMI, sensor interfaces, and the ability to author clear, detailed firmware requirements and collaborate closely with firmware teams, • Proven technical leadership and communication skills, with experience driving digital thread initiatives and using automation, scripting, or AI-based tools to generate and validate thermal control parameter tables Desired Skills • Familiarity with model-based systems engineering and advanced thermal control methods, such as PID, adaptive or AI-assisted controls, state-machine modeling, and using CFD or thermal simulation insights to inform control strategies for high-power, air- or liquid-cooled systems, • Exposure to digital thread concepts and platform-level control strategy, including linking simulation, controls, firmware, and validation workflows, as well as using automation, scripting, or AI-based tools to help generate, validate, or optimize thermal control parameters and support architectural decisions Compensation Dell is committed to fair and equitable compensation practices. The base salary range for this position is $144,500-$187,000. Benefits and Perks of working at Dell Technologies Your life. Your health. Supported by your benefits. You can explore the overall benefits experience that awaits you as a Dell Technologies team member — right now at MyWellatDell.com Who we are We believe that each of us has the power to make an impact. That's why we put our team members at the center of everything we do. If you're looking for an opportunity to grow your career with some of the best minds and most advanced tech in the industry, we're looking for you. Dell Technologies is a unique family of businesses that helps individuals and organizations transform how they work, live and play. Join us to build a future that works for everyone because Progress Takes All of Us. Dell Technologies is committed to the principle of equal employment opportunity for all employees and to providing employees with a work environment free of discrimination and harassment. Read the full Equal Employment Opportunity Policy here . Job ID: R287059

Job Description We are seeking a EO/IR Systems Engineer to develop laser, electro-optic, and infrared systems for our defense aerospace customers. As an individual contributor, you will work as part of a cross-functional, multi-disciplinary team contributing to the design, modeling, simulation, and testing efforts that will evolve next-generation of autonomous systems supporting the digital/electronic warfare battle environment. We support next-generation threat detection, countermeasures and defensive counter-attack solutions to provide customers and users full-spectrum electronic capabilities to enhance mission survivability. This position is in Austin, TX with a relocation to our new state of the art Howard Lane facility. Candidates for this position can expect to work in small to, equity mid-size teams that are cooperative, dependable, and supportive working as both co-located and geographically distributed. The successful candidate will be responsible for requirements analysis and decomposition, system design, and collaboration with engineers from other disciplines. BAE Systems Countermeasures & Electromagnetic Attack Solutions business is a product-driven group dedicated to the mission. Spanning air, land, sea, and space, we are developing the technology of tomorrow, delivered today. Drawing strength from our differences, we are innovating for the future. Our flexible work environment, 9/80 schedule, provides you a chance to change the world without giving up your personal life. We put our customers first exemplified by our mission: We Protect Those Who Protect Us. As an individual contributor, you will be responsible for and supporting of bringing technologies to bear on next-generation military/commercial applications. You will also perform, delivering technical value, in BAE Systems Countermeasure & Attack Solutions (CEMA) Business Area. CEMA has immediate openings for systems engineering in the (ISS) Product Lines. Also, as a technical contributor, you will work with other engineering staff members to grow and capture our knowledge through engineering changes, lessons learned and product/process improvements in your area(s) of expertise. Since cultural and behavioral principles are a special part of our systems engineering organization, we are also looking for team players. Sound like a team you want to be a part of? If so, we want what you ve got. Come build your career with us at BAE Systems in one of the fastest growing metropolitan cities in the US - Austin Texas, where the housing market and cost of living is affordable & the people are warm and friendly. Responsibilities * Supporting existing EO/IR SME in design, development, test & integration of mission critical systems * Understanding and implementing test requirements in the process of building, integrating and testing laser optical systems for test equipment and measurement techniques. * Presenting contributions and lessons learned to teammates through Agile Scrum Methodology Because this role involves a combination of collaborative/in-person and independent work, it will take the form of a hybrid work format, with time split between working onsite and remotely. Required Education, Experience, & Skills * Bachelor s degree in engineering or related STEM field with 3 to 4 years related experience or a Master s degree and 2 years related experience * Experience on laser development programs, or other electro-optic/infrared development programs * Proficient with Python and/or MATLAB software. * Must possess an Active Secret Clearance and be eligible for an SAP/SAR Clearance * Experience in optical and opto-mechanical systems. Preferred Education, Experience, & Skills * Possessing an ability to be cleared for an active Secret Clearance to support designing military products, specifically countermeasure systems, EO/IR camera systems, or soft kill countermeasure systems * Experience with MBSE Digital Engineering and SysML applications/tools like MagicDraw * Strong background in requirements analysis and design. * Experience with integration and test is also desirable * Excellent communication and collaboration skills, with the ability to work effectively with engineers in other disciplines * System Engineering life cycle practices and processes (INCOSE) * Specific skills within the domains of active EO/IR, passive EO/IR or Electronic Warfare (EW) * Executing tasks in Agile Environments (Sprints, Daily Scrums, Retrospectives, Planning Poker) Pay Information Full-Time Salary Range: $97008 - $164914 Please note: This range is based on our market pay structures. However, individual salaries are determined by a variety of factors including, but not limited to: business considerations, local market conditions, and internal equity, as well as candidate qualifications, such as skills, education, and experience. Employee Benefits: At BAE Systems, we support our employees in all aspects of their life, including their health and financial well-being. Regular employees scheduled to work 20 hours per week are offered: health, dental, and vision insurance; health savings accounts; a 401(k) savings plan; disability coverage; and life and accident insurance. We also have an employee assistance program, a legal plan, and other perks including discounts on things like home, auto, and pet insurance. Our leave programs include paid time off, paid holidays, as well as other types of leave, including paid parental, military, bereavement, and any applicable federal and state sick leave. Employees may participate in the company recognition program to receive monetary or non-monetary recognition awards. Other incentives may be available based on position level and/or job specifics. Senior EO/IR Systems Engineer (Hybrid) 122231BR EEO Career Site Equal Opportunity Employer. Minorities . females . veterans . individuals with disabilities . sexual orientation . gender identity . gender expression

Job Seekers can review the Job Applicant Privacy Policy by clicking here () . Job Description : Summary This Warehouse Automation Engineering position can be responsible for he effort in identifying, evaluating, piloting and deploying new warehouse automation technologies, followed by the installation and deployment of new and optimizatoin of warehouse automation technologies. This dedicated teams and capability differentiates Ryder by driving efficiencies to grow existing and win new business. This position will require a breadth of knowledge across many business types and automation technologies. Work directly with internal operations, solution design, continuous improvement, information technology, product teams and stakeholders to identify, select, and deploy new technology with automation partners. Consult with internal and external contacts to quickly demonstrate the value and feasibility of warehouse automation capabilities to create a competitive differentiator. Work directly with the customer and business owners to identify new ideas and collaborate across verticals, regions, and functional areas to evaluate, pilot, develop and implement warehouse automation solutions. Essential Functions * RFP and New Business Support:- Lead minor RFP project and support lead engineer on major RFP projects by leading automation selection and validation on new business sale projects by identifying potential automation technologies.- Build ROI and justification based upon multiple criteria in order to select the optimal solution design- Support build of presentation with Lead Automation Solutions Engineer * SOW (Scope of Work) Contractual Validation:-Support automation project lead on identifying gaps in vendor FSD/SOW using the FSD Checklist process * Design Validation:- Provide input on automation solution designs to ensure that key items are considered for implementation and ongoing operational performance- Review design options for clearance issues, power requirments, cost effeictiveness and SLA targets. * Automation Procurement:- Help lead build collateral for vendor tech review request and requests for quotes.- Review design options for various vendors and solutions * Implementation Project Management:- Some Project Management of smaller projects, including updating of Punch List, Project Plan- Track milestones and requirements for implementation of projects * Implementation Support: - Attend implementation status calls when needed. - Verify and prioritize optimal on-stie support is utilized on all projects - Ensure communication to vendor and on-site staff and handle escalation events. - Coordiante support for onsite team for post-go live hypercare . - Support on-site Solution Acceptance Test (SAT) testing plan - Support tracking of Punch List after go-live for Uptime items * Data Analytics:- Profile data from dashboard and systems to support system optimization projects- Perform data analysis on reports technology controls systems and WMS/WES * Implementation Commissioning and Solution Validation:- Support Solutions Acceptance Testing (SAT )testing plan- Support tracking of Punch List * Strategy and Success Measurements:- Review team strategy with manager to set personal goals * Financial Responsibilities:- Validate spend with manager- Support Project Leads on tracking project budget * Automation Troubleshooting:- Partner with vendor to resolve Priority 1-5 tickets related to down/degregated performance with site automation- Join on P1/P1 Resolutions calls Additional Responsibilities * Support vendor communication for minor projects. * Develops pilot activities and the hypothesis to be tested. Defines the proof of concept, formalizes the team, identifies a pilot location, obtains approvals, evaluates vendors and determines a pilot timeline. Deploys acceptable pilots to quickly evaluate business fit & operational feasibility. These results will help feed the solution design team to include proven technologies into new business proposals. Evaluate, pilot and deploy new warehouse automation technologies. * Validation of new technology and automation will be supported by this role through Proof of Concept implementations. These POC implementations will be driven by the automation team, as they will also coordinate the value-justification of the project with Senior Management and the cross-functional team involved. * Performs other duties as assigned. Skills and Abilities * Driven to help organizations innovate with new warehouse automation capabilities or technologies., Required * Strong planning, time management, collaboration, decision making, organization and presentation skills, Required * High degree of comfort and ease with ambiguity and uncertainty., Required * Ability to create and maintain professional relationships within all levels of the organization (peers, work groups, customers, supervisors)., Required * Ability to work independently and as a member of a team., Required * Ability to work independently and as a member of a team., Required * Passion for understanding clients and internal customer's vision and business goals., Required * Ability to champion ambiguous scenarios and challenges., Required * Natural sense of leadership and ownership - in research, pilot and thought leadership activity., Required * Problem-solver, curious, hands-on mentality., Required * Act as a change agent in adopting warehouse automation technologies to deliver significant operational improvement across the organization and to coach business owners and functional leads in the deployment of these new technologies., Required * Demonstrated success in assessing, developing and deploying new offerings or incremental enhancement., Required Qualifications * Bachelor's Degree in Industrial Engineering, Mechanical Engineering or related field of study, Required * Master's Degree in Industrial Engineering, Mechanical Engineering or related field of study, Preferred * 3 years or more in 3 years or more experience in warehouse automation, material handling technologies, industrial engineering or warehouse systems integration., Preferred * 2 years or more in Demonstrated experience in warehouse automation, Preferred * 2 years or more in Experience in warehouse automation that may would preferable include some of the following, sortation conveyor, goods-to-person, autonomous vehicles/robots, ASRS's, Required * Automation, Management Consulting, Physical & Process Robotic experience. Beginner, Required * Knowledge of Warehouse Management operations, data analytics, Industrial Engineering, warehouse types (ambient, temp control) and Lean methods. Beginner, Required * Knowledge of all available material handling equipment and automation types such as: forklift applications, racking designs, packaging devices and automation design. Intermediate, Required * Warehouse Design Tools i.e.; CAD, slotting, MOST, simulation, WMS, Labor Mgt. Network Design Tools a plus (e.g., Llamasoft). Data Visualization Software (e.g., Tableau, Power BI) a plus. Beginner, Required * Industrial or Mechanical Engineering or with equivalent warehouse operational knowledge. Beginner, Required * Experienced in financial business case analysis to help support targeted return on investment. Intermediate, Preferred Travel Compensation Information : The compensation offered to a candidate may be influenced by a variety of factors, including the candidate's relevant experience; education, including relevant degrees or certifications; work location; market data/ranges; internal equity; internal salary ranges; etc. The position may also be eligible to receive an annual bonus, commission, and/or long-term incentive plan based on the level and/or type. Compensation ranges for the position are below: Pay Type : Salaried 100000 115000 Benefits Information : For all Full-time positions only : Ryder offers comprehensive health and welfare benefits, to include medical, prescription, dental, vision, life insurance and disability insurance options, as well as paid time off for vacation, illness, bereavement, family and parental leave, and a tax-advantaged 401(k) retirement savings plan. For more information about benefits, click here () to download the comprehensive benefits summary. Ryder is proud to be an Equal Opportunity Employer and Drug Free workplace. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, sexual orientation, gender identity, age, status as a protected veteran, among other things, or status as a qualified individual with disability. Important Note : Some positions require additional screening that may include employment and education verification; motor vehicle records check and a road test; and/or badging or background requirements of the customer to which you are assigned. Ryder will only communicate with an applicant directly from a [@ryder.com] email address and will never conduct an interview online through a chat type forum, messaging app (such as WhatsApp or Telegram), or via an online questionnaire. During an interview, Ryder will never ask for any form of payment or banking details and will never solicit personal information outside of the formal submitted application through . Should you have any questions regarding the application process or to verify the legitimacy of an interview or Ryder representative, please contact Ryder at . Current Employees : If you are a current employee at Ryder, please click here () to log in to Workday to apply using the internal application process. Job Seekers can review the Job Applicant Privacy Policy by clicking here () . #wd

Job DescriptionPlease Note: To conform with the United States Government Space Technology Export Regulations, the applicant must be a U.S. citizen, lawful permanent resident of the U.S., conditional resident, asylee or refugee (protected individuals as defined by 8 U.S.C. 1324b(a)(3)), or eligible to obtain the required authorizations from the U.S. Department of State. At CesiumAstro, we are developers and pioneers of out-of-the-box communication systems for satellites, UAVs, launch vehicles, and other space and airborne platforms. We take pride in our dynamic and cross-functional work environment, which allows us to learn, develop, and engage across our organization. If you are looking for hands-on, interactive, and autonomous work, CesiumAstro is the place for you. We are actively seeking passionate, collaborative, energetic, and forward-thinking individuals to join our team. We are seeking an Engineering Manager, RF Hardware to lead and coordinate our RF teams across multiple sites and product lines. This leadership role is critical to ensuring design consistency, best practices, and high-quality deliverables across a broad portfolio of hardware platforms. This position is a highly technical leadership role responsible for delivering well-engineered RF hardware—on schedule—across all product lines. This role provides technical ownership for board- and box-level RF hardware development while leading team execution, staffing, and engineering process maturity in a fast-growing aerospace and defense startup environment. In addition to people and process leadership, this role contributes hands-on technical expertise to critical RF hardware designs, reviews, and debug efforts, ensuring products are scalable, manufacturable, and testable at production volumes.JOB DUTIES AND RESPONSIBILITIES • Maintain technical integrity and engineering excellence for RF electronics development across the company., • Establish, mature, scale, and enforce engineer-friendly RF hardware development processes, including analysis and simulation templates, schematic design standards, layout best practices, and design and review checklists., • Lead and participate in rigorous design reviews, ensuring appropriate subject matter expert (SME) engagement., • Apply strong working knowledge of adjacent disciplines—power electronics, digital electronics, mechanical engineering, and firmware/software—to ensure board- and system-level success., • Contribute directly to board-level and unit-level RF hardware designs as needed., • Lead or support critical debug efforts across development and production phases., • Ensure RF hardware designs are buildable and testable at scale using DFM and DFT best practices., • Drive disciplined handoff from engineering to manufacturing through close collaboration with manufacturing engineering, supply chain, and production test engineering., • Ensure designs meet quality, reliability, and scalability requirements for production environments., • Lead RF component selection strategies aligned with product requirements, customer needs, and industry trends., • Manage RF supplier relationships and technology roadmaps to support long-term product evolution., • Partner with Supply Chain to ensure component availability, risk mitigation, and cost awareness.TEAM LEADERSHIP, STAFFING & PERFORMANCE RESPONSIBILITIES, • Build, scale, and lead a high-performing RF hardware engineering team., • Advocate for realistic schedules, then hold the team accountable to delivery commitments., • Lead hiring activities, including writing job descriptions, conducting interviews, and making hire/no-hire decisions., • Establish clear development paths and growth opportunities for high-performing engineers., • Address performance issues promptly and constructively., • Actively close skill gaps through hands-on contribution or targeted hiring., • Provide one-on-one coaching, mentoring, and technical guidance., • Serve as a key contributor to early-stage engineering execution planning, including collaboration with Business Development., • Drive design commonality and reuse across products to accelerate execution and reduce risk., • Plan and manage budgets related to staffing, capital equipment, and design/analysis software., • Maintain strong working relationships across Engineering, Manufacturing, Supply Chain, Quality, and Operations.JOB REQUIREMENTS AND MINIMUM QUALIFICATIONS, • Bachelor’s degree in Electrical Engineering or related field required., • Minimum of 7-9 years of progressive RF hardware engineering experience, preferably in aerospace, defense, or regulated manufacturing, including 1–3 years in leadership/management experience., • Demonstrated deep expertise in RF hardware design at the board and system levels., • Strong understanding of RF components, system architectures, and signal integrity principles., • Working knowledge of power electronics, digital electronics, mechanical integration, and firmware interactions., • Experience supporting design for manufacturability (DFM), design for test (DFT), and transition from development to production., • Proven ability to conduct rigorous technical reviews, mentor engineers, and communicate effectively across disciplines., • Ability to balance technical rigor with execution speed in a fast-paced development environment., • Proficiency with RF simulation and analysis tools such as ADS, HFSS, CST, or equivalent., • Experience using schematic capture and PCB layout tools., • Familiarity with product lifecycle management (PLM) systems., • Proficiency with Microsoft Office tools, including Excel, PowerPoint, and Word.

Job DescriptionPlease Note: To conform with the United States Government Space Technology Export Regulations, the applicant must be a U.S. citizen, lawful permanent resident of the U.S., conditional resident, asylee or refugee (protected individuals as defined by 8 U.S.C. 1324b(a)(3)), or eligible to obtain the required authorizations from the U.S. Department of State. At CesiumAstro, we are developers and pioneers of out-of-the-box communication systems for satellites, UAVs, launch vehicles, and other space and airborne platforms. We take pride in our dynamic and cross-functional work environment, which allows us to learn, develop, and engage across our organization. If you are looking for hands-on, interactive, and autonomous work, CesiumAstro is the place for you. We are actively seeking passionate, collaborative, energetic, and forward-thinking individuals to join our team. We are looking to add a Senior RF Engineer I to our team. The ideal candidate has experience in board-level RF electronics design. If you enjoy working in a startup environment, and are passionate about developing leading-edge RF hardware for satellites, spacecraft, and aerospace systems, we would like to hear from you. In this position, you will be responsible for RF circuits and systems through all phases of the development process. The ideal candidate will be proficient in board-level schematic design and PCB layout of RF circuits, and system-level communications concepts such as link budgets and modulation schemes. The work will include many aspects of phased array communication systems, including RF front-ends, frequency converters and synthesizers, filters, beamformers, power dividers, and phased array antennas. As a Cesium hardware team member, you will be responsible for RF hardware designs from initial concept through requirements definition, part selection, detailed design, analysis, manufacturing, testing, qualification, and in-orbit support of Cesium's products. Hardware design tasks will include block diagrams, detailed schematics, PCB layout and routing, simulations, and test design. The successful candidate will also present engineering design review materials to our customers and executive team, as well as participate in proposal-writing efforts. As such, excellent written and verbal communication skills are required.JOB REQUIREMENTS AND MINIMUM QUALIFICATIONS • Bachelor of Science (BS) or Master of Science (MS) degree in Electrical Engineering (EE) from an accredited university or institution., • Minimum of 4 years of industry experience in design and analysis of RF electronics design, analysis, test, and troubleshooting., • Experience with professional simulation tools such as CST and ADS, as well as EDA tools such Altium., • Hands-on experience with lab instruments such as vector network analyzers, spectrum analyzers, signal generators, and oscilloscopes., • Excellent written and verbal communication skills.PREFERRED EXPERIENCE, • MATLAB or other programming languages., • Aerospace electronics design, development, and qualification., • Worst-case circuit analysis, failure method and criticality analyses, and reliability analysis., • Antenna design.

Job Description No sponsorship available. No third-party candidates. This company was founded by a trio of experienced engineers aiming to innovate underwater audio technology. Our client is continuing to scale and will need you, a skilled Senior FPGA Engineer, to play a key role in bringing the bringing the technology to life. What you get to do: -Design and develop embedded systems built on FPGA technology -Create digital logic design using Verilog / SystemVerilog -Implement high-speed DSP algorithms in digital logic -Develop custom IP cores from scratch -Work with innovative simulation tools and write custom test utilities What you need to succeed: -5+ years of RPGA engineering experience -Proven ability to write mathematical algorithms to run on a GPU in Windows -Previous experience using Verilog / SystemVerilog for digital logic design -Hands-on experience with C, embedded C, MATLAB, and/or Python -Bachelors degree in Electrical Engineering or Computer Engineering What’s in it for you: As a full-time employee, you’ll have access to great internal benefits, professional development, and more! Apply online today to learn more about this new opportunity! Company DescriptionTechnology Navigators is a technical staffing firm specialized in recruiting skilled technologists for project-oriented consulting and contract positions. We've been firmly rooted in the Austin technology community since 1999, and have been providing companies that develop, build, and use technology with the people they need to grow their business for over two decades.Technology Navigators is a technical staffing firm specialized in recruiting skilled technologists for project-oriented consulting and contract positions. We've been firmly rooted in the Austin technology community since 1999, and have been providing companies that develop, build, and use technology with the people they need to grow their business for over two decades.

Job DescriptionPlease Note: To conform with the United States Government Space Technology Export Regulations, the applicant must be a U.S. citizen, lawful permanent resident of the U.S., conditional resident, asylee or refugee (protected individuals as defined by 8 U.S.C. 1324b(a)(3)), or eligible to obtain the required authorizations from the U.S. Department of State. At CesiumAstro, we are developers and pioneers of out-of-the-box communication systems for satellites, UAVs, launch vehicles, and other space and airborne platforms. We take pride in our dynamic and cross-functional work environment, which allows us to learn, develop, and engage across our organization. If you are looking for hands-on, interactive, and autonomous work, CesiumAstro is the place for you. We are actively seeking passionate, collaborative, energetic, and forward-thinking individuals to join our team. We are looking to add an experienced Principal GNC Engineer I to our team. If you are great at what you do, enjoy working in a startup environment, and are passionate about developing GNC systems for leading-edge spacecraft, and aerospace communication systems, we would like to hear from you. In this position, you will draw on your experience on previous spacecraft to operate on a small team in the design and analysis of GNC systems for CesiumAstro satellites and payloads. You will be responsible for Guidance, Navigation, and Control through all stages of design, integration, test, and operations. As such, you will perform trade studies, lead design reviews, create models, and complete simulations and system testing. You will build, test, and fly hardware and software. As a CesiumAstro spacecraft team member, you will work on a small team to develop satellites and put them in orbit. Your work will have a direct impact on the success of the company. You will work closely with the engineering team, program management to ensure the successful build and launch of our satellite. Element will be the largest, most powerful rideshare satellite in LEO. We’re launching eight of them in the next four years, starting with our first launch this year. Together, our small team will design, build, and iterate to reduce mass and cost while increasing performance, reliability, and manufacturability of a new generation of satellites. Let’s build! JOB REQUIREMENTS AND MINIMUM QUALIFICATIONS • Master of Science (MS), or Doctorate (Ph.D.) degree in Aerospace Engineering from an accredited university or institution, • Minimum of 9 years of industry experience in satellite attitude and orbit systems, • Deep expertise in spacecraft attitude estimation, guidance, and control, including nonlinear state estimation theory and implementation (e.g., Extended Kalman Filters (EKF), Multiplicative EKF (MEKF), Unscented Kalman Filters (UKF), or other nonlinear observers); coordinate frame transformations; linear algebra; and nonlinear systems, • Experience with multiple spaceflight missions from concept to operations, • Experience in low earth orbit satellites, • Experience with post-CDR test failures and on-orbit failures that guide your design and test philosophies, • Experience with successful and unsuccessful recovery from on-orbit failures, • Experience in conceptualization, architecture design, requirements specification, design, test, and operations of various GNC architectures and components, • Familiarity with space mission simulation tools such as STK, Basilisk, GMAT, or FreeFlyer, • Experience defining spacecraft trajectories and orbital requirements, • Fluency with Python and C++, or other modeling languages, • Familiarity with spacecraft mission design including events, pointing modes, maneuver planning, and operations, • Excellent written and verbal communication skills PREFERRED EXPERIENCE, • Demonstrated experience designing, implementing, tuning, and validating flight-grade state estimators, including covariance propagation, bias estimation, sensor fusion (e.g., IMU, star tracker, GNSS, magnetometer), and Monte Carlo-based performance analysis, • Experience performing observability analysis, estimator consistency analysis (e.g., NEES/NIS), and robustness evaluation under sensor degradation or fault conditions, • Experience architecting end-to-end ADCS estimation pipelines, including fault detection, measurement rejection, mode-dependent filter configurations, and on-orbit estimator anomaly resolution, • CubeSat and SmallSat experience, • Hands-on experience with spacecraft instrumentation, subsystems, and test labs, • Experience with multiple mission simulation and flight architectures which drives your vision for the next generation of space software, • Experience in LEO, MEO, GEO, and deep space satellites

Job Description Company Summary We are a well-established leader in millturn CNC technology. We specialize in large, complex multi-function machines designed for handling very large and heavy workpieces. Our company is expanding its presence in the US, with operations becoming increasingly self-sustaining through dedicated regional sales and technical support teams. Job Summary Position: Applications Engineer (CNC Programmer/Machine Setup Professional) Focus: Qualification and runoff of new machines, development and tryout of new cutting sequences, production support, and customer training on our machines at customer sites throughout the U.S. The role is highly customer-facing and travel-intensive (60–80%), involving hands-on technical work, programming, troubleshooting, and training at customer facilities. Candidates should be comfortable with autonomy, travel, and both technical and instructional responsibilities. Responsibilities • Program and troubleshoot complex millturn parts from various industries using state-of-the-art CNC technology., • Discuss machining process-related topics with customers and the applications department., • Conduct cycle time calculations and process sequence charts., • Perform qualification and runoff of new machines at customer sites., • Develop, program, and try out new cutting sequences., • Provide production support at customer facilities., • Train customer personnel on programming and operation of millturn machines. Hard/Technical Skills • Experience with macro programming and use of variables in CNC code (G and M code proficiency required; macro-level programming preferred), • Solid understanding of CNC machine functions, work holding principles, and tool setup., • Strong background in applied metal cutting (turning, milling, drilling, etc.)., • Hands-on experience setting up and operating multi-axes machine tools., • Ability to read and evaluate complex 2-D part drawings and 3-D models., • Proficiency in Microsoft Office applications (Word and Excel)., • Valid driver's license and clean driving record., • Excellent planning skills and efficient time management., • Strong communication skills (verbal and written) for effective interaction with customers and internal teams., • Customer-directed and service-oriented mindset., • Ability to define problems, collect data, establish facts, and draw valid conclusions., • Experience with Siemens (Sinumerik 840D) control system., • Experience with CAD/CAM and CNC simulation., • Hands-on experience setting up and operating multi-axes multi-function millturn-type machine tools., • Familiarity with workpiece probes for in-machine measurement and alignment., • Macro programming and use of variables in CNC code., • Conversational programming experience., • Experience with exotic alloys., • Personable, presentable, and comfortable instructing/communicating with customers and small groups. Compensation & Benefits • Base Salary: $80,000 – $100,000 (depending on experience)., • Annual Bonus: (dependent on company performance)., • Car Allowance: $750/month., • Mileage Reimbursement, • Per Diem: $69/day for food while traveling., • Travel Expenses: All flights, hotels, rental cars, etc., reimbursed (employees book their own travel and submit expense reports)., • Remote / field-based; candidate can reside anywhere in the US with reasonable access to a major airport., • Extensive travel required (60–80%+), primarily nationwide in the US

Job DescriptionPlease Note: To conform with the United States Government Space Technology Export Regulations, the applicant must be a U.S. citizen, lawful permanent resident of the U.S., conditional resident, asylee or refugee (protected individuals as defined by 8 U.S.C. 1324b(a)(3)), or eligible to obtain the required authorizations from the U.S. Department of State. At CesiumAstro, we are developers and pioneers of out-of-the-box communication systems for satellites, UAVs, launch vehicles, and other space and airborne platforms. We take pride in our dynamic and cross-functional work environment, which allows us to learn, develop, and engage across our organization. If you are looking for hands-on, interactive, and autonomous work, CesiumAstro is the place for you. We are actively seeking passionate, collaborative, energetic, and forward-thinking individuals to join our team. We are looking to add a Senior Electronics Engineer II to our Digital/Mixed-Signal Electronics team. If you enjoy working in a startup environment and are passionate about developing leading-edge electronics for satellites, spacecraft, and aerospace systems, we would like to hear from you. At the Senior II level, you will be tasked with full-stack hardware development for complex modules and small systems. You will have the opportunity to start at concept development and progress through detailed design, analysis, layout, build, test, and delivery, doing hands-on work at each phase. The Senior II level also introduces technical leadership opportunities, gaining responsibility for small teams of hardware engineers developing new products and systems. At a small company and a startup, your work will make direct contributions to the success of the business. The work is challenging and impactful, requiring both breadth and depth of technical knowledge. Our products are made for high-reliability space and airborne applications, so designs require high levels of technical rigor while maintaining the agility of a startup environment. The successful candidate will also present engineering design review materials to our customers and executive team. As such, excellent written and verbal communication skills are required.JOB DUTIES AND RESPONSIBILITIES • Own end-to-end design of complex electronics modules and small systems, from concept and architecture through schematic, layout, test, and production., • This role focuses on digital and mixed-signal hardware development for space applications. Product lines include state-of-the-art software-defined radios (SDRs), single-board computers (SBCs), and control & telemetry subsystems for complex phased array antenna payloads., • Lead small teams of hardware engineers to develop new products with multiple electronics modules., • Develop hardware architecture and write hardware requirements for systems of moderate complexity., • Perform detailed and complete schematic design for complex boards, ranging from key components to supporting passives., • Perform detailed PCB layout in Altium Designer for complex boards, often working with a PCB Designer., • Complete board-level and box-level analysis such as worst-case circuit analysis, signal integrity analysis, and power integrity analysis, and guide interpretation of results., • Develop bring-up plans and design verification plans for new hardware and systems., • Perform bring-up and key verification testing of modules and small integrated systems, often working with a technician to complete validation., • Release modules and assemblies to production, working with the Manufacturing and Test Engineering teams., • Mentor junior and senior engineers to build technical understanding and professional development., • Use working knowledge of adjacent fields, such as software and mechanical, to streamline development of electronics modules and systems.JOB REQUIREMENTS AND MINIMUM QUALIFICATIONS, • Bachelor of Science (BS) degree or higher in Electrical Engineering from an accredited university., • Minimum of 6 years of relevant experience in board-level electronics design, analysis, and test., • Significant experience designing electronics with rigor, in teams that value thorough analysis and testing. Aerospace design experience preferred but not required., • Expertise in aspects of digital and mixed-signal electronics, such as signal integrity, implementing FPGAs on boards, ADCs/DACs, and telemetry subsystems. Experience with high-speed digital (e.g. 10+ Gbps SerDes) and SDR applications are preferred but not required., • Experience owning the design phase of complex board-level electronics, including trade studies, key part selection, and detailed design., • Experience delivering hardware designs through production and deployment., • Expertise in PCB layout, including high-density interconnect (HDI) stackup design and high-speed routing., • Experience running board-level signal integrity and/or power integrity simulation tools such as Ansys SIwave, ADS SIPro, or Mentor Hyperlynx., • Proven success in debugging, root cause analysis, and design reviews., • Strong working knowledge of adjacent fields, such as software and mechanical, that guides hardware design and system design., • Expert-level proficiency in electronics design tools such as Altium., • Extensive lab experience for bring-up and verification of new hardware., • Excellent written and spoken communication skills.PREFERRED EXPERIENCE, • 8+ years of professional electronics design experience., • Experience leading small teams of hardware engineers to develop multi-module assemblies, including hardware architecture, requirements, make/buy decisions, and interconnects., • Expertise in high-speed digital electronics (e.g. 10+ Gbps SerDes), including signal integrity simulation and lab verification, SerDes optimization (e.g. emphasis and drive level), and high-speed interconnect solutions., • Expertise in software-defined radio (SDR) applications., • Direct experience designing high-reliability electronics for space or defense applications, including part derating, worst-case analysis, and thermal constraints.

Job Description Join our Team! We offer 100% employer-paid benefits and an opportunity to work on cutting edge technologies in a dynamic team! Do you have a passion for working with customers and expanding a client base? Are you a dynamic, detail-oriented professional? If so, check out this great opportunity with Acutronic. We are looking for a Sales Engineer to join our Austin, TX team. Our ideal candidate would have at least three years of experience in aerospace/defense sales. Sales Engineer (Aerospace) • Lead the effort to generate technical proposals, costs back-up sheets, quotation documents, budgetary estimates, cover letters, and other customer requested documentation, • Approach existing and new customers to promote the sales of our Aerospace Component Division products, in order to responsibly grow revenues, assist in managing commercial and technical risks, and meeting overall financial objectives, • Create/update product datasheets, technical notes, quotation templates and standard budgets to support Acutronic marketing and productization efforts, • Prepare and deliver technical presentations that explain products or services to customers and prospective customers, • Conduct market analysis using tools to understand existing customers and platforms, identify new customers and platforms and to determine future product development Your qualifications/skills should include: • Bachelor of Science degree in Mechanical Engineering, Electrical Engineering, or a related field from an accredited college or university, preferred, • At least three years of sales experience in the aerospace components industry, preferred, • A combination of experience and education will be considered, • Must be a US Person We Offer: • Employer-paid medical, dental, and vision insurance, • 401k match, • Company-paid holidays and Paid Time-Off, • 9/80 schedule Position Type/Physical Demands: • Work is generally performed in an office environment, • 10-15% domestic travel required to support customer / supplier About Acutronic: The Acutronic Group has a proud history of building technologies and teams that are crucial to the aerospace, defense, and transportation industries. Acutronic’s Simulation & Test Division is the global market leader in high-performance motion simulation and test equipment. Our rate tables and advanced centrifuges are used to test or calibrate inertial sensors, navigation systems, and stabilized electro-optics. Hardware-In-the-Loop motion simulators replicate the flight motion profiles and engagement scenarios of missiles. Geotechnical centrifuges and their related accessories are designed to study the behavior of structures, soil mechanics, and earthquakes. Our vibration test systems (shaker tables) allow users to carry out environmental tests to ensure the robustness or quality of manufactured products. The Division also develops and refurbishes stabilized or gimbaled-platforms utilized in applications such as tracking mounts, gun turrets, and directed-energy systems. Acutronic’s Aerospace Components Divison manufactures specialty components for use on uncrewed aerial vehicles, land defense applications, and missile systems. These products are used on next-generation aerospace programs and include a range of electric power systems, servo-actuators, micro-turbines, and Hybrid-Electric-Propulsion-Systems. We offer standard products and excel at designing highly customized solutions for demanding mission requirements. The Acutronic Group employs approximately 300 employees across sites in Austin, Texas; Pittsburgh, Pennsylvania; Switzerland; Germany; France; and India. Acutronic Turbines Inc. 3401 Ed Bluestein Blvd, Austin, TX 78721 acutronic.com +1 737 212 9013 Acutronic is an Equal Opportunity Employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability or protected veteran status. If you have a disability or special need that requires accommodation, please contact us at or phone 412.926.1200. Powered by JazzHR Om83fB2Q8z

Job DescriptionPlease Note: To conform with the United States Government Space Technology Export Regulations, the applicant must be a U.S. citizen, lawful permanent resident of the U.S., conditional resident, asylee or refugee (protected individuals as defined by 8 U.S.C. 1324b(a)(3)), or eligible to obtain the required authorizations from the U.S. Department of State. At CesiumAstro, we are developers and pioneers of out-of-the-box communication systems for satellites, UAVs, launch vehicles, and other space and airborne platforms. We take pride in our dynamic and cross-functional work environment, which allows us to learn, develop, and engage across our organization. If you are looking for hands-on, interactive, and autonomous work, CesiumAstro is the place for you. We are actively seeking passionate, collaborative, energetic, and forward-thinking individuals to join our team. We are looking to add a Senior Verification Engineer I to our team. If you enjoy working in a startup environment and are passionate about developing leading-edge phased arrays for satellites, spacecraft, and aerospace systems, we would like to hear from you.JOB DUTIES AND RESPONSIBILITIES • Contribute to the evaluation and technical implementation of FPGA and digital design simulation, verification and emulation infrastructure., • Contribute to the development, maintenance and phased deployment of continuous integration and regression testing infrastructure., • Develop state-of-the-art UVMf-based top-level and module-level testbenches using block-to-top best practices for reusability, including both control and data plane stimulation using VIP & System Verilog DPI-C integration with existing MATLAB and Python numerical models., • Lead the development of reusable custom VIP modules., • Work closely with the engineering and senior leadership teams to train and mentor engineers at all experience levels on UVMf testbench usage and modern approaches to FPGA/digital design. Work with the modeling and scientific staff to implement DPI-C dataplane verification interfaces into existing MATLAB and Python models., • Aid the Lead Verification Engineer in evaluating current processes regarding FPGA and digital design with a focus on Xilinx TLM models and QEMU-RP integration., • Work closely with vendors to define requirements of future simulation model deliverables., • Maintain up-to-date knowledge of industry best-practices regarding FPGA and digital design methodologies., • Work closely with the engineering leadership team to evaluate and non-disruptively implement process improvements.JOB REQUIREMENTS AND MINIMUM QUALIFICATIONS, • A Bachelor of Science (BS) or Master of Science (MS) degree in Computer Science, Electrical Engineering, or Computer Engineering., • Minimum of 4 years of industry experience in verification and automation., • Deep knowledge of FPGA digital design verification techniques including VHDL, Verilog, SystemVerilog, C/C++, SystemC, UVM/UVMf, DPI-C, TLM, Formal CDC and functional analysis, QEMU and VIP., • Expert-level knowledge of digital design automation infrastructure, including CI, regression testing and HIL testing., • Competency with Linux., • Advanced-level knowledge of vendor-provided FPGA development tools with a focus on Xilinx tools., • Desire and ability to train and mentor while maintaining a positive and productive attitude.

Job DescriptionPlease Note: To conform with the United States Government Space Technology Export Regulations, the applicant must be a U.S. citizen, lawful permanent resident of the U.S., conditional resident, asylee or refugee (protected individuals as defined by 8 U.S.C. 1324b(a)(3)), or eligible to obtain the required authorizations from the U.S. Department of State. At CesiumAstro, we are developers and pioneers of out-of-the-box communication systems for satellites, UAVs, launch vehicles, and other space and airborne platforms. We take pride in our dynamic and cross-functional work environment, which allows us to learn, develop, and engage across our organization. If you are looking for hands-on, interactive, and autonomous work, CesiumAstro is the place for you. We are actively seeking passionate, collaborative, energetic, and forward-thinking individuals to join our team. We are actively seeking passionate, collaborative, energetic, and forward-thinking individual to join our team as a Principal RF Engineer I. The ideal candidate has extensive experience in board-level and system-level RF electronics design. If you enjoy working in a startup environment and are passionate about developing leading-edge phased arrays for satellites, spacecraft, and aerospace systems, we would like to hear from you. In this position, you will be responsible for RF circuits, modules, and systems through all phases of the development process. The ideal candidate will be proficient in board-level schematic design and PCB layout of RF circuits, system-level communications concepts such as link budgets and modulation schemes, and end-to-end RF product development. The work will include many aspects of phased array communication systems, including RF front ends, frequency converters and synthesizers, filters, beamformers, power dividers, and phased array antennas. As a principal hardware team member, you will be responsible for RF system and hardware designs from initial concept through requirements definition, architecture definition, part selection, detailed design, analysis, manufacturing, testing, qualification, and in-orbit support of Cesium's products. Hardware design tasks will include block diagrams, detailed schematics, PCB layout and routing, simulations, and test design. Principal Engineers also serve as technical and professional mentors in their field and may be given the opportunity to lead company programs. The successful candidate will also present engineering design review materials to our customers and executive team, as well as participate in proposal-writing efforts. As such, excellent written and verbal communication skills are required.Successful candidates will require: • Bachelor of Science (BS)) degree in Electrical Engineering (EE) from an accredited university or institution. Master of Science (MS) desired., • Minimum of 9 years of industry experience in design and analysis of RF electronics and systems., • Expert-level proficiency in professional simulation tools such as CST and ADS, as well as EDA tools such Altium., • Extensive hands-on experience with lab instruments such as vector network analyzers, spectrum analyzers, signal generators, and oscilloscopes., • Excellent written and verbal communication skills.Preferred experience includes:, • Python or other programming languages., • Aerospace electronics design, development, and qualification., • Worst-case circuit analysis, failure method and criticality analyses, and reliability analysis., • Antenna design

Job DescriptionPlease Note: To conform with the United States Government Space Technology Export Regulations, the applicant must be a U.S. citizen, lawful permanent resident of the U.S., conditional resident, asylee or refugee (protected individuals as defined by 8 U.S.C. 1324b(a)(3)), or eligible to obtain the required authorizations from the U.S. Department of State. At CesiumAstro, we are developers and pioneers of out-of-the-box communication systems for satellites, UAVs, launch vehicles, and other space and airborne platforms. We take pride in our dynamic and cross-functional work environment, which allows us to learn, develop, and engage across our organization. If you are looking for hands-on, interactive, and autonomous work, CesiumAstro is the place for you. We are actively seeking passionate, collaborative, energetic, and forward-thinking individuals to join our team. We are looking to add a Principal Hardware Engineer I to our team. If you are great at what you do, enjoy working in a startup environment, and are passionate about developing leading-edge electronics for satellites, spacecraft, and aerospace systems, we would like to hear from you. At the Principal level, you will be tasked with full-stack hardware development for complex modules and hardware systems. You will have the opportunity to start at concept development and progress through detailed design, analysis, layout, build, test, and delivery, doing hands-on work at each phase. The Principal level also includes technical leadership opportunities, gaining responsibility for critical designs and teams of engineers developing new products and systems. At a small company and a startup, your work will make direct contributions to the success of the business. The work is challenging and impactful, requiring both breadth and depth of technical knowledge. Our products are made for high-reliability space and airborne applications, so designs require high levels of technical rigor while maintaining the agility of a startup environment. The successful candidate will also present engineering design review materials to our customers and executive team. As such, excellent written and verbal communication skills are required.JOB DUTIES AND RESPONSIBILITIES • Own end-to-end design of complex electronics modules and systems, from concept and architecture through schematic, layout, test, and production. Products may include high-speed digital, power electronics, and/or RF., • Lead teams of hardware engineers to develop new products with multiple electronics modules., • Provide subject matter expertise in support of hardware development across the company., • Develop hardware architecture and write hardware requirements for systems of high complexity., • Perform detailed and complete schematic design for complex boards, ranging from key components to supporting passives., • Perform detailed PCB layout in Altium Designer for complex boards, often working with a PCB Drafter., • Complete analysis such as worst-case circuit analysis, signal integrity analysis, and power integrity analysis. Guide analysis methodology., • Develop bring-up plans and design verification plans for new hardware and complex systems., • Perform bring-up and key verification testing of modules and complex integrated systems, often working with a team to complete validation., • Release modules and assemblies to production, working with the Manufacturing and Test Engineering teams., • Mentor junior and senior engineers to build technical understanding and professional development., • Use strong working knowledge of adjacent fields, such as software and mechanical, to streamline development of complex hardware systems.JOB REQUIREMENTS AND MINIMUM QUALIFICATIONS, • Bachelor of Science (BS) degree or higher in Electrical Engineering from an accredited university., • Minimum of 9 years of industry or university research experience in board-level electronics design, analysis, and test., • Direct experience designing high-reliability electronics and small systems for space or defense applications, including part derating, worst-case analysis, and thermal constraints., • Experience owning the design phase of complex board-level electronics and small hardware systems, including architecture design, trade studies, key part selection, and detailed design., • Multiple experiences delivering hardware products through production and deployment., • Expertise in PCB layout and manufacturing, including high-density interconnect (HDI) stackup design, IPC standards, and industry best practices., • Expertise derisking designs with board-level signal integrity and/or power integrity simulation tools such as Ansys SIwave, ADS SIPro, or Mentor Hyperlynx., • Strong understanding of adjacent fields, such as software and mechanical, that contributes to judicious design of hardware system architectures., • Expert-level proficiency in electronics design tools such as Altium., • Extensive lab experience for bring-up and verification of new hardware, based on in-depth understanding of specialized lab equipment., • Excellent written and spoken communication skills.PREFERRED EXPERIENCE, • Experience leading teams of hardware engineers to develop multi-module assemblies, including hardware architecture, requirements, and interconnects.

Job DescriptionPlease Note: To conform with the United States Government Space Technology Export Regulations, the applicant must be a U.S. citizen, lawful permanent resident of the U.S., conditional resident, asylee or refugee (protected individuals as defined by 8 U.S.C. 1324b(a)(3)), or eligible to obtain the required authorizations from the U.S. Department of State. At CesiumAstro, we are developers and pioneers of out-of-the-box communication systems for satellites, UAVs, launch vehicles, and other space and airborne platforms. We take pride in our dynamic and cross-functional work environment, which allows us to learn, develop, and engage across our organization. If you are looking for hands-on, interactive, and autonomous work, CesiumAstro is the place for you. We are actively seeking passionate, collaborative, energetic, and forward-thinking individuals to join our team. We are looking to add a Senior Mechanical Engineer I to our Mechanical Engineering team. If you enjoy working in a startup environment and are passionate about developing space hardware for leading-edge communications satellites, we would like to hear from you. In this position, you will be responsible for mechanical design aspects of Cesium phased array antennas, subsystems, and interfaces through all phases of the development process. The ideal candidate will be versatile and proficient in mechanical analysis, electronics packaging, computer-aided design (CAD), mechanical interfaces, thermal architecture, spacecraft propulsion, deployable and actuated structures, and environmental qualification of spacecraft antennas and payloads. You will be responsible for mechanical designs from concept through space flight including requirements definition, architecture trades and block diagrams, analysis, manufacturing, testing, qualification, and in-orbit support. The successful candidate will also present engineering design review materials to our customers and executive team, as well as participate in proposal-writing efforts. As such, excellent written and verbal communication skills are required. JOB REQUIREMENTS AND MINIMUM QUALIFICATIONS • Bachelor of Science (BS) in Mechanical or Aerospace Engineering from an accredited university or institution, • Minimum of 4 years of experience in space antenna and payload mechanical engineering to include electronics packaging, thermal, shock, vibration, stress dynamics, and cost. A Master's degree may count as two years of experience., • Experience in conducting architectural trade studies including parametric and first-order cost and physical analysis, • Experience with professional mechanical and FEA CAD tools, such as Ansys Mechanical, SolidWorks Simulation, and Thermal Desktop, • Experience with CNC manufacturing and GD&T, • Experience with advanced aerospace manufacturing and materials including sandwich panels and carbon composites, OR experience with high-reliability deployment mechanisms for space applications (including deployment, HDRMs, power delivery, etc.)., • Proficiency in detailed mechanical design (3D CAD, drawings, etc.), • Experience designing and manufacturing mechanisms and mechanical actuators, • Experience with EMI/EMC mitigation techniques, • Familiarity with satellite thermal architectures including heat pipes, phase change materials, contact resistance, and surface finishes as well as fundamental understandings of orbital thermal control in a LEO environment., • Familiarity with launch and LEO environments (thermal, shock, vibe, radiation, etc), • Familiarity with design for test, manufacturability, assembly, and reliability, • Excellent written and verbal communication skills PREFERRED EXPERIENCE, • Python, C++, or other programming languages, • Experience with large, deployable antenna arrays which drive your vision for the next generation of on-orbit communications and sensor arrays., • Robotics and control systems experience

Job DescriptionPlease Note: To conform with the United States Government Space Technology Export Regulations, the applicant must be a U.S. citizen, lawful permanent resident of the U.S., conditional resident, asylee or refugee (protected individuals as defined by 8 U.S.C. 1324b(a)(3)), or eligible to obtain the required authorizations from the U.S. Department of State. At CesiumAstro, we are developers and pioneers of out-of-the-box communication systems for satellites, UAVs, launch vehicles, and other space and airborne platforms. We take pride in our dynamic and cross-functional work environment, which allows us to learn, develop, and engage across our organization. If you are looking for hands-on, interactive, and autonomous work, CesiumAstro is the place for you. We are actively seeking passionate, collaborative, energetic, and forward-thinking individuals to join our team. We are looking to add a Senior RF Engineer II to our team. The ideal candidate has experience in board-level RF electronics design. If you enjoy working in a startup environment and are passionate about developing leading-edge RF hardware for satellites, spacecraft, and aerospace systems, we would like to hear from you. In this position, you will be responsible for RF circuits and systems through all phases of the development process. The ideal candidate will be proficient in board-level schematic design and PCB layout of RF circuits, and system-level communications concepts such as link budgets and modulation schemes. The work will include many aspects of phased array communication systems, including RF front-ends, frequency converters and synthesizers, filters, beamformers, power dividers, and phased array antennas. As a Cesium hardware team member, you will be responsible for RF hardware designs from initial concept through requirements definition, part selection, detailed design, analysis, manufacturing, testing, qualification, and in-orbit support of Cesium's products. Hardware design tasks will include block diagrams, detailed schematics, PCB layout and routing, simulations, and test design. The successful candidate will also present engineering design review materials to our customers and executive team, as well as participate in proposal-writing efforts. As such, excellent written and verbal communication skills are required.JOB REQUIREMENTS AND MINIMUM QUALIFICATIONS • A Bachelor of Science (BS) or Master of Science (MS) degree in Electrical Engineering (EE) from an accredited university or institution., • 6+ years of industry experience in design and analysis of RF electronics design, analysis, test, and troubleshooting., • Experience with professional simulation tools such as CST and ADS, as well as EDA tools such Altium., • Hands-on experience with lab instruments such as vector network analyzers, spectrum analyzers, signal generators, and oscilloscopes., • Excellent written and verbal communication skills.PREFERRED EXPERIENCE, • Experience with MATLAB or other programming languages., • Experience in aerospace electronics design, development, and qualification., • Knowledge of worst-case circuit analysis, failure method and criticality analyses, and reliability analysis., • Experience with antenna design.

Job DescriptionSaronic Technologies is a leader in revolutionizing autonomy at sea, dedicated to developing state-of-the-art solutions that enhance maritime operations through autonomous and intelligent platforms. Position OverviewSaronic Technologies is seeking a Senior Electrical Engineer specializing in ruggedized computing and networking systems to join our Electrical Engineering – Advanced Development group.This role will focus on the research, evaluation, and development of robust onboard computing architectures, embedded systems, and high-reliability network solutions that power Saronic’s autonomous vessel platforms.The ideal candidate will have deep experience designing and validating ruggedized electronic systems for mission-critical applications, including embedded computing, network topologies, data management, and environmental hardening for commercial maritime and defense use cases.This position bridges R&D, systems engineering, and hands-on integration - supporting both technology evaluation and fleet deployment.Key Responsibilities • Lead R&D initiatives in ruggedized computing and networking architectures for autonomous surface vessels., • Design, evaluate, and integrate embedded computing systems, data acquisition units, and network infrastructures optimized for high performance in harsh marine environments., • Conduct benchmarking and trade studies on ruggedized COTS and custom computing solutions (edge computers, network switches, routers, storage units, etc.)., • Develop and validate system architectures for high-availability networks supporting autonomy, sensing, and control subsystems., • Collaborate with software, autonomy, and mechanical engineering teams to ensure reliable data throughput and system resilience across vessel networks., • Specify and validate environmental and EMC/EMI compliance for computing and networking hardware., • Prototype and test system configurations in laboratory and field conditions, including shock, vibration, temperature, and humidity testing., • Author technical documentation, including R&D reports, trade studies, wiring diagrams, and integration standards., • Mentor junior engineers and contribute to internal design guidelines for next-generation computing and network systems., • Support system integration and troubleshooting during prototype builds, dockside commissioning, and sea trials.Required Qualifications, • B.S. or M.S. in Electrical Engineering, Computer Engineering, or related discipline., • 7+ years of experience in electrical or systems engineering focused on computing and networking technologies in ruggedized or mission-critical environments., • Expertise in embedded computing platforms, network design, and hardware integration., • Experience with Ethernet, CAN, serial, and fiber-optic communication protocols and their implementation in distributed systems., • Proven track record of benchmarking and trade study development for hardware performance and reliability., • Familiarity with marine, aerospace, automotive or defense environmental standards (MIL-STD-810, MIL-STD-461, IEC 60945, etc.)., • Strong understanding of power distribution, grounding, and thermal management in dense electronics enclosures., • Excellent communication skills and experience producing clear technical documentation and reports., • Hands-on experience with system integration and environmental testing.Preferred Qualifications, • Experience developing or integrating ruggedized computing solutions for maritime or defense systems., • Familiarity with network security, IEEE 1588/PTP Protocol, VLAN management, and deterministic networking for real-time systems., • Knowledge of data logging, storage, and redundancy architectures in distributed sensor networks., • Experience with hardware-in-the-loop (HITL) and hardware-software co-simulation environments., • Background in autonomous or remote vehicle platforms., • Understanding of cybersecurity standards and secure network design principles., • Experience using 3D CAD tools to communicate with other engineering groups (e.g. Siemens NX, Creo, SolidWorks), • Experience utilizing ECAD tools to define/draw single line diagrams and schematics (e.g. Altium, Zuken, AutoCAD, Siemens Capital)Benefits, • Medical Insurance: Comprehensive health insurance plans covering a range of services, • Dental and Vision Insurance: Coverage for routine dental check-ups, orthodontics, and vision care, • Saronic pays 100% of the premium for employees and 80% for dependents, • Time Off: Generous PTO and Holidays, • Parental Leave: Paid maternity and paternity leave to support new parents, • Competitive Salary: Industry-standard salaries with opportunities for performance-based bonuses, • Retirement Plan: 401(k) plan, • Stock Options: Equity options to give employees a stake in the company’s success, • Life and Disability Insurance: Basic life insurance and short- and long-term disability coverage, • Additional Perks: Free lunch benefit and unlimited free drinks and snacks in the office Physical Requirements, • Prolonged periods of sitting at a desk and working on a computer., • Occasional standing and walking within the office., • Manual dexterity to operate a computer keyboard, mouse, and other office equipment., • Visual acuity to read screens, documents, and reports., • Occasional reaching, bending, or stooping to access file drawers, cabinets, or office supplies.

Job Description We’re making the world a more walkable place. Through intuitive personal mobility, we make walking faster, more efficient, and more accessible to empower people to choose walking over sitting in traffic. By giving people the ability to Moonwalk, we believe the path forward to a better future is easily reached on your own two feet. Help us advance the world’s fastest shoes by designing, prototyping, and testing reliable and innovative hardware. We want an engineer ready to push the boundaries and one who makes the impossible a reality. We are looking for a work ethic similar to an engineer in Formula One. You must deliver and iterate quickly. We are not here for mediocrity, we are here to create elegant engineering designs. Is it demanding? Sure, but it is also rewarding and fun. While we embark on developing the next generation of Moonwalkers, we need to add to the Gait Control team, where we are looking for a person with real-world experience in developing a bipedal locomotion controller and an eye for detail. You will work with our mechanical team on the sensor and actuator packaging, the electronics team to balance performance and cost, and our software team to run your controller in the most efficient and reliable fashion. We are covered in Wired, CNET, Gizomodo, PCMag and many other tech press. Responsibilities: • The Gait Control Engineer is a critical position and will be responsible for leading the development of the gait control algorithm by applying machine learning, sensor fusion and bipedal locomotion control., • You will prototype novel algorithms in simulation and evaluate them on the actual prototype., • You will develop control strategies for various poses and gait, implement and evaluate the control system onto the real-world machine., • You will solve complex problems through efficient models that run on low-cost embedded systems with limited computational resources., • You will act as a solid system expert in ensuring safe and intuitive response of Shift shoes at all times., • You will be responsible for determining how to best design for performance requirements and system safety. You will determine what is most important, potential problems that may arise and for developing designs and solutions to enhance performance and reception., • You will develop production-quality embedded code with the firmware team and own your algorithms from design to production. Requirements • At least 2 years research and development experience in bipedal locomotion, actuated prosthetics, or humanoid robotics, and published papers in internationally recognized conference or journals., • Forward and Inverse Kinematics and Dynamics., • Model predictive control., • Expertise in control systems, state estimation, multibody dynamics, or optimization, • Sensor fusion and state estimation., • Proficient with Matlab, Python or other prototyping language., • Demonstrated excellence in real-time control and processing using C and C++., • Familiar with Matlab Simulink or physical model simulation such as Mujuco., • Experience developing, debugging, and optimizing real-time controls on highly dynamic machines., • Strong intuition for physical movement in machines, and insight into the physics of motion., • Opportunities for participation in our Employee Options programs, • 401K retirement plan, • Excellent medical, dental, and vision insurance, • Sick and Vacation time (Flex time for salary positions), and Paid Holidays, • Massive Growth Opportunities and a long-term career, • Casual and comfortable work environment

Job Description Lead Robotics Engineer – Real-Time Interceptor Systems Austin, TX | On-site Opportunity Summary Join a venture-backed defense technology team developing robotic systems designed to detect, track, and physically intercept small autonomous aerial threats in real time. These systems operate under strict latency and reliability constraints and are built for immediate deployment, not long-cycle research. This role owns the control layer that converts perception outputs into precise physical motion. You will design and implement control systems that drive high-speed actuation and ensure stability in dynamic environments. The work sits at the intersection of robotics, embedded systems, and real-world performance, with direct impact on deployed hardware. About Us We are an early-stage, venture-backed engineering team focused on building practical defense systems for modern operational environments. The team operates with a strong bias toward execution, rapid iteration, and real-world validation. Engineers are expected to work across software and hardware, take ownership of systems, and contribute directly to field-ready capabilities. Job Duties • Design and deploy real-time control systems for robotic platforms operating under dynamic conditions, • Develop and tune control algorithms to ensure stability, responsiveness, and accuracy at high speeds, • Convert perception and tracking outputs into reliable actuator commands with minimal latency, • Build embedded software in Rust, C, or C++ for direct hardware control and system coordination, • Integrate actuators, motor controllers, sensors, and compute into fully functional robotic systems, • Implement state estimation pipelines using IMU and vision-based inputs, • Own system performance across simulation, hardware testing, and field deployment, • Develop tools for calibration, logging, diagnostics, and system validation, • Debug issues across software, hardware, and system integration layers, • Collaborate with cross-functional teams to deliver complete, production-ready systems Qualifications • 5+ years of experience building robotic or embedded systems in real-world environments, • Strong understanding of control systems, dynamics, and real-time system behavior, • Experience implementing control algorithms on physical hardware, • Proficiency in Rust, C, or C++ with an emphasis on performance and reliability, • Experience with embedded systems and hardware communication protocols such as CAN, SPI, or UART, • Comfortable working directly with hardware, including debugging and system bring-up, • Track record of delivering systems that operate reliably outside of controlled environments, • U.S. Citizenship and ability to obtain a security clearance Preferred Experience • Experience working on high-speed or safety-critical robotic systems, • Background in aerospace, robotics, or defense-related applications, • Familiarity with ROS2 or similar robotics frameworks, • Experience with edge compute platforms such as NVIDIA Jetson, • Exposure to guidance, navigation, and control systems or HITL environments, • Experience in early-stage or fast-paced engineering teams Why Join Us • Direct ownership of critical system components that impact deployed hardware, • Fast iteration cycles with regular real-world testing and validation, • Small, highly technical team with high trust and autonomy, • Opportunity to work on systems where performance and reliability are essential, • Early-stage environment with meaningful ownership and growth potential Compensation Details $200,000 - $300,000 #LI-AV

Job DescriptionLast Energy is a pioneering US technology company deploying next-generation modular nuclear power plants. With projects underway in the US and UK, we’re transforming how nuclear energy is designed, built, and delivered—through high-throughput manufacturing, efficient supply chains, and rapid deployment strategies. As a Senior Mechanical Engineer at Last Energy, you’ll work directly with the CEO and core leadership team to drive forward the most critical mechanical and system-level challenges shaping our fleet-wide product. This is a role for builders, doers, and innovators who thrive in a fast-paced, hands-on environment where decisions are made quickly and your ideas directly shape the product.Key Duties & Responsibilities • Lead design and execution of critical mechanical systems and components that enable scalable, manufacturable nuclear power plants, • Collaborate daily with the CEO and executive team on the company’s most urgent engineering priorities—your technical insights will directly inform product strategy and deployment timelines, • Drive concept development, detailed CAD modeling, and rapid prototyping of novel industrial systems, • Perform structural, thermal, and fluid analyses using advanced simulation tools (FEA, CFD) to validate and optimize designs, • Design and analyze complex mechanical assemblies, • Integrate mechanical, electrical, and control systems into cohesive plant-level solutions, • Oversee prototype fabrication, assembly, and testing, both in-house and with external partners, • Develop fixtures, tooling, and manufacturing aids to streamline build and test operations, • Continuously optimize designs for manufacturability and deployment speed, balancing performance with cost and scalability, • Operate autonomously, driving projects from concept to reality in a startup culture that values speed, ingenuity, and accountabilityQualifications, • Bachelor’s degree in Mechanical Engineering or a related field (advanced degree a plus), • 4+ years of hands-on mechanical design and analysis experience in high-growth, high-urgency environments (startup or advanced manufacturing preferred), • Deep proficiency with CAD tools (SolidWorks, AutoCAD, or equivalent), • Demonstrated expertise in FEA and CFD using software such as ANSYS, LS-DYNA, Nastran, or similar., • Strong foundation in materials science, stress analysis, and thermal/fluid systems, • Proven ability to turn concepts into tested prototypes quickly, with minimal oversight, • Exceptional communication and collaboration skills, especially when interfacing with executives and cross-functional teams, • A bias toward action, creative problem solving, and the drive to own complex problems end-to-endLast Energy provides decarbonized, reliable, affordable nuclear energy at scale by innovating on the delivery model, not the reactor. By significantly reducing the time and cost of deployment, we are decarbonizing global energy production, increasing access to 24/7 baseload power, and creating a scalable clean energy future for humanity.

Job DescriptionPlease Note: To conform with the United States Government Space Technology Export Regulations, the applicant must be a U.S. citizen, lawful permanent resident of the U.S., conditional resident, asylee or refugee (protected individuals as defined by 8 U.S.C. 1324b(a)(3)), or eligible to obtain the required authorizations from the U.S. Department of State. At CesiumAstro, we are developers and pioneers of out-of-the-box communication systems for satellites, UAVs, launch vehicles, and other space and airborne platforms. We take pride in our dynamic and cross-functional work environment, which allows us to learn, develop, and engage across our organization. If you are looking for hands-on, interactive, and autonomous work, CesiumAstro is the place for you. We are actively seeking passionate, collaborative, energetic, and forward-thinking individuals to join our team. We are looking to add a Senior GNC Engineer I to our team. If you are great at what you do, enjoy working in a startup environment, and are passionate about developing GNC systems for leading-edge spacecraft, and aerospace communication systems, we would like to hear from you. In this position, you will draw on your experience on previous spacecraft to operate on a small team in the design and analysis of GNC systems for CesiumAstro satellites and payloads. You will be responsible for Guidance, Navigation, and Control through all stages of design, integration, test, and operations. As such, you will perform trade studies, lead design reviews, create models, and complete simulations and system testing. You will build, test, and fly hardware and software. As a CesiumAstro spacecraft team member, you will work on a small team to develop satellites and put them in orbit. Your work will have a direct impact on the success of the company. You will work closely with the engineering team, program management to ensure the successful build and launch of our satellite. Element will be the largest, most powerful rideshare satellite in LEO. We’re launching eight of them in the next four years, starting with our first launch this year. Together, our small team will design, build, and iterate to reduce mass and cost while increasing performance, reliability, and manufacturability of a new generation of satellites. Let’s build! JOB REQUIREMENTS AND MINIMUM QUALIFICATIONS • Master of Science (MS), or Doctorate (Ph.D.) degree in Aerospace Engineering from an accredited university or institution, • Minimum of 6 years of industry experience in satellite attitude and orbit systems, • Expertise in attitude estimation, guidance, and control; coordinate frame transformations; linear algebra; and non-linear systems, • Experience with multiple spaceflight missions from concept to operations, • Experience in low earth orbit satellites, • Experience with post-CDR test failures and on-orbit failures that guide your design and test philosophies, • Experience with successful and unsuccessful recovery from on-orbit failures, • Experience in conceptualization, architecture design, requirements specification, design, test, and operations of various GNC architectures and components, • Familiarity with space mission simulation tools such as STK, Basilisk, GMAT, or FreeFlyer, • Experience defining spacecraft trajectories and orbital requirements, • Fluency with Python and C++, or other modeling languages, • Familiarity with spacecraft mission design including events, pointing modes, maneuver planning, and operations, • Excellent written and verbal communication skills PREFERRED EXPERIENCE, • A focus on satellite navigation, orbit determination, and propulsive maneuvers, • CubeSat and SmallSat experience, • Hands-on experience with spacecraft instrumentation, subsystems, and test labs, • Experience with multiple mission simulation and flight architectures which drives your vision for the next generation of space software, • Experience in LEO, MEO, GEO, and deep space satellites

Job Description Join our Team! We offer 100% employer-paid benefits and an opportunity to join a dynamic team working on cutting edge technologies! Acutronic is looking for a Test Engineer III who will perform a wide range of tasks including: product testing, validation/qualification, assembly, supply chain, inventory, and quality management; as well as manufacturing and engineering tasks. The goal and purpose of the Test Engineer’s job duties will be to maintain robust operational systems to achieve manufacturing consistency, drive continual improvement, and reduce product defects and human error. Test Engineer III Your Roles/Responsibilities: • Develop and execute test procedures and functional testing for jet engine systems and subsystems, • Select and integrate appropriate test equipment, instrumentation, and data acquisition systems to support required data collection for jet engine system and subsystem testing, • Ensure instrumentation and test equipment remain calibrated in accordance with internal standards, • Collect, analyze, and post-process test data in accordance with internal and customer requests, • Generate test reports, documentation, and data packages, • Develop test standards, procedures, standard work, and safety protocols, • Continuously improve test facilities, data acquisition capabilities, and test equipment, • Develop relevant procedures and instructions to support QC methods, changes or formalized decisions, • Design and implement sampling procedures and related instructions for recording, evaluating, and reporting quality data, • Lead and/or support negotiations with customers concerning quality demand fulfillment(s); and/or resolution of quality deficiencies including preparing external customer documentation Your Profile/Qualifications/Skills: • Bachelor’s degree in Mechanical Engineering, Aerospace Engineering, or a related field required, • At least seven years of experience in testing of aerospace systems, • Strong background in measurement of pressures, temperatures, fluid flow, vibration, etc; with experience in standard measurement techniques, instrumentation options, and data acquisition systems, • Working knowledge of LabView or similar data acquisition systems We Offer: • Employer-paid medical, dental, and vision insurance, • 401k match, • Company-paid holidays and Paid-Leave Time, • 9/80 schedule About Acutronic: The Acutronic Group has a proud history of building technologies and teams that are crucial to the aerospace, defense, and transportation industries. Acutronic’s Simulation & Test Division is the global market leader in high-performance motion simulation and test equipment. Our rate tables and advanced centrifuges are used to test or calibrate inertial sensors, navigation systems, and stabilized electro-optics. Hardware-In-the-Loop motion simulators replicate the flight motion profiles and engagement scenarios of missiles. Geotechnical centrifuges and their related accessories are designed to study the behavior of structures, soil mechanics, and earthquakes. Our vibration test systems (shaker tables) allow users to carry out environmental tests to ensure the robustness or quality of manufactured products. The Division also develops and refurbishes stabilized or gimbaled-platforms utilized in applications such as tracking mounts, gun turrets, and directed-energy systems. Acutronic’s Aerospace Components Division manufactures specialty components for use on uncrewed aerial vehicles, land defense applications, and missile systems. These products are used on next-generation aerospace programs and include a range of electric power systems, servo-actuators, micro-turbines, and Hybrid-Electric-Propulsion-Systems. We offer standard products and excel at designing highly customized solutions for demanding mission requirements. The Acutronic Group employs approximately 300 employees across sites in Austin, Texas; Pittsburgh, Pennsylvania; Switzerland; Germany; France; and India. Acutronic Integrated Systems Inc. 3401 Ed Bluestein Blvd, Austin, TX 78721 acutronic.com +1 737 212 9013 Acutronic is an Equal Opportunity Employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability or protected veteran status. If you have a disability or special need that requires accommodation, please contact us at or phone 412.926.1200. Powered by JazzHR Bw790DrSFK

Job DescriptionPlease Note: To conform with the United States Government Space Technology Export Regulations, the applicant must be a U.S. citizen, lawful permanent resident of the U.S., conditional resident, asylee or refugee (protected individuals as defined by 8 U.S.C. 1324b(a)(3)), or eligible to obtain the required authorizations from the U.S. Department of State. At CesiumAstro, we are developers and pioneers of out-of-the-box communication systems for satellites, UAVs, launch vehicles, and other space and airborne platforms. We take pride in our dynamic and cross-functional work environment, which allows us to learn, develop, and engage across our organization. If you are looking for hands-on, interactive, and autonomous work, CesiumAstro is the place for you. We are actively seeking passionate, collaborative, energetic, and forward-thinking individuals to join our team. We are seeking a Senior Power Electronics Engineer I (2025121) to join our growing spacecraft payload development team. In this position, you will contribute across the entire development lifecycle of next-generation power electronics hardware for satellites and space power systems payloads—from working to define power system architectures and trade studies to detailed circuit design, simulation, printed circuit board (PCB) layout, verification and integration testing, production transition, and manufacturing support. DUTIES AND RESPONSIBILITIES * Define electrical power system architecture, and derive power subsystem requirements * Design DC-DC power converters, power management and control circuits from concept to production release * Perform detailed design for low to high complexity analog and power electronics circuits ranging from single DC-DC power converters to multi-output power supply modules * Perform modeling and analysis of analog and power electronics designs including worst-case circuit analysis (WCA), stress analysis, small signal modeling analysis, failure modes and effects analysis (FMEA), reliability analysis, and power integrity analysis * Develop design verification test plans, requirement compliance matrices, system integration and qualification test plans, and production acceptance test plans for power converters and power supply designs * Perform board bring-up and design verification testing of analog and power electronics circuits * Perform system integration, qualification testing, and production release of power supply modules and power systems * Perform research and monitor power electronics industry trends to drive innovation and generate intellectual property in this area REQUIREMENTS AND MINIMUM QUALIFICATIONS * Bachelor of Science (BS) degree or higher in Electrical Engineering (or related) from an accredited university * Minimum of 4 years of experience designing analog and power electronics * Experience with power stage design of common DC-DC power converter topologies (e.g. discrete linear regulators, Buck, Boost, Buck-boost, Flyback) * Experience with voltage mode control and peak current mode control modeling and characterization for DC-DC converters * Knowledge of control theory and stability of power electronics, including experience characterizing control loops and impedances in the laboratory * Experience designing power filters for low noise outputs and for power line electromagnetic compatibility (EMC) * Hands-on experience with testing and troubleshooting electronics and power converters using laboratory instruments such as oscilloscopes, impedance analyzers, spectrum analyzers, electronic loads, and signal generators * Experience with electronics schematic capture and printed circuit board (PCB) layout tools such as Altium, OrCAD, Allegro or Xpedition * Experience with analysis and simulation tools such as SPICE, LTSPICE, SIMetrix/SIMPLIS, PLECS, Simulink, MATLAB, MathCAD, ANSYS Q3D and SiWave, or HyperLynx * Excellent written and verbal communication skills PREFERRED EXPERIENCE * Master of Science or PhD in Electrical Engineering with research focus in power electronics * Experience designing high-reliability analog and power electronics for automotive, space or defense applications * Knowledge of space radiation environments and radiation effects in electronics * Experience in power electronics applications utilizing GaN or SiC wide bandgap power semiconductor devices * Experience developing design verification test plans, requirement compliance matrices, system integration and qualification test plans, and production acceptance test plans * Experience performing worst-case circuit analysis (WCA), stress analysis, failure modes and effects analysis (FMEA), and reliability analysis for power supplies * Experience running board-level power integrity simulation using tools such as Ansys SiWave, or HyperLynx * Experience with power magnetics modeling, design and laboratory characterization * Knowledge of soft switching and resonant power converter topologies (e.g. LLC, CLLC, series resonant, phase shifted full bridge, dual active bridge, etc.) * Knowledge of power stage design for inverters and motor drives * Experience with advanced control schemes for DC-DC power converters (e.g. constant on-time control, boundary mode control, average current mode control) * Programming skills to support hardware test and data processing (Python, MATLAB, etc.) CesiumAstro considers several factors when extending an offer, including but not limited to, the role and associated responsibilities, a candidate’s work experience, education/training, and key skills. Full-time employment offers include company stock options and a generous benefits package including health, dental, vision, HSA, FSA, life, disability and retirement plans. CesiumAstro is an Equal Opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, protected Veteran Status, or any other characteristic protected by applicable federal, state, or local law. Please note: CesiumAstro does not accept unsolicited resumes from contract agencies or search firms. Any unsolicited resumes submitted to our website or to CesiumAstro team members will be considered property of CesiumAstro, and we will not be obligated to pay any referral fees. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description Electrical / System Engineer Interested in getting in at the ground floor of a new, disruptive company attacking an important multi-billion-dollar problem? Businesses and consumers continue to demand increasing data services at an exponential rate -- streaming, deep learning, analytics, loT connectivity, and more. What this means is higher performing CPUs, components, servers, and ultimately Data and Edge computing centers, all generating excessive heat that is increasingly difficult to manage with traditional cooling systems. Accelsius is developing revolutionary direct-to-chip, 2-Phase cooling technologies that empower and enable Server OEMs, Data Centers, Edge Computing Operators, and 5G Edge deployments to meet performance, sustainability, scale, and cost goals while serving this high-growth market for data services. Accelsius is hiring an Electrical Engineer with broad, systems-level skills. You’ll work on everything from sensor interfaces and power conversion to leading sensor integration and hands-on bring-up/debug across complex electro-mechanical systems. On our Systems Engineering team, you’ll architect, build, and troubleshoot the electronics that power our enterprise cooling platforms—delivering reliable, testable hardware for data-center deployment. Role Responsibilities: • Responsible for the overall design of power delivery subsystems in our enterprise cooling solutions as well as system boards that use sensor input for control loops., • Works with other engineering teams on component selection and system architecture of electro-mechanical aspects of the rack cooling solution., • Candidate should have multiple years of experience in electrical or complex system design and completed products that have made it into full production., • Previous design experience based around automation with analogue and digital feedback desired., • Component selection knowledge with broad understanding of what’s currently available from the industry and suppliers. This can vary from small electrical components to large valves, pumps, and pressure sensors. Willingness to learn from vendors and trade events is key., • Skills in schematic design, with familiarity in board layout, and routing using Altium is a bonus., • Candidates should have familiarity with common datacenter power distribution and cooling norms and practices., • Experience around typical serial IO interfaces, i2c, SPI, RS485, and analog signal conditioning for use by A2D., • Experience in board bring-up and debug using typical lab equipment. Troubleshooting thought process is important., • Candidates must enjoy being on a talented team while learning and sharing knowledge., • B.S. in electrical engineering, mechatronics engineering or related fields preferred. The position is onsite based in Austin, Texas. This position includes the responsibilities outlined above and may also encompass additional duties as assigned to meet business and compliance needs. Accelsius does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity or expression, national origin, age, disability, veteran status, marital status, or based on an individual's status in any group or class protected by applicable federal, state or local law. Accelsius encourages applications from minorities, women, the disabled, protected veterans, and all other qualified applicants.

Job Description Hyliion is committed to creating innovative solutions that enable clean, flexible and affordable electricity production. The Company's primary focus is to develop distributed power generators that can operate on various fuel sources to future-proof against an ever-changing energy economy. Job Purpose and Overview Step into the world of metal additive manufacturing for the KARNO generator, where advanced laser powder-bed fusion meets real engineering challenge. Engineers in this group work across machine behavior, process optimization, material performance, data analytics, and hardware development to ensure high-quality, repeatable production using metal laser powder-bed fusion systems. If you're the kind of engineer who enjoys digging into machine behavior, fine-tuning laser strategies, studying how materials evolve layer by layer, and pushing metal AM systems to run cleaner, faster, and more consistently, this team is built for you. The work is hands-on, data-driven, and central to scaling a first-of-its-kind distributed power technology. In this role, you'll move across the entire additive manufacturing ecosystem. You'll investigate how machine settings influence melt pools, porosity, and microstructure, and you'll design controlled experiments to refine parameters and boost repeatability. A big part of the job involves troubleshooting machine quirks, interpreting sensor data, and making sense of real-time process feedback. You'll also be working closely with design, materials, and hardware teams to bring complex AM components from early prototypes into reliable production. Along the way, you'll help build the systems, standards, and workflows that turn metal AM into a high-trust, high-reliability manufacturing process for power-generation hardware. Duties and Responsibilities: Parameter Development Focus • Identify and optimize critical-to-function (CTF) parameters that drive mechanical performance, density, porosity, microstructure, and repeatability., • Design and execute experiments (DOE) to map the process window, understand sensitivities, and reduce variation., • Build and maintain parameter sets for new alloys, new hardware, and new machine configurations., • Work with sensor data, log files, and monitoring systems to correlate in-process signatures with part quality., • Improve AM machine capability through hardware tuning, sensor integration, calibration routines, and control-system optimization., • Lead machine troubleshooting, repair activities, and upgrades to improve uptime, repeatability, and print speeds., • Conduct machine characterization using advanced tools and metrology equipment to map laser optics, powder behavior, thermal gradients, and recoater performance., • Support machine-level IQ/OQ/MQ qualification and ongoing PM/maintenance strategies. Qualifications Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Education, Experience and Certifications Required • Bachelor's degree in mechanical, materials science, aerospace, or related engineering discipline., • Requires a minimum of 5 years of engineering experience after earning a bachelor's degree; relevant graduate project work can be applied toward requirements., • Direct, hands-on experience with laser powder bed fusion (LPBF) additive manufacturing REQUIRED., • Background in fabrication, prototyping, testing, or process development within an engineering environment., • Ability to interpret engineering drawings, apply GD&T, and understand material properties data., • Strong analytical and root-cause problem-solving skills., • Build prep/simulation software like ANSYS Additive Suite, 3DXpert, or Dyndrite., • Experience developing AM parameters, designing DOEs, or using statistical analysis tools (SPC, JMP, Minitab, Python, MATLAB)., • Experience troubleshooting AM machines, calibrating optics, repairing systems, or working with machine sensors and controls., • Knowledge of DFAM principles, heat-treat processes, and additive-appropriate material behaviors (e.g., nickel alloys, titanium)., • Familiarity with CAD tools (NX, SolidWorks, or similar) and simulation/analysis workflows., • Experience with IQ/OQ/MQ qualification approaches., • Strong communication skills and ability to present findings to cross-functional teams. These engineers sit at the core of enabling scalable, high-performance additive manufacturing for the KARNO generator platform. Your work directly influences machine capability, part quality, manufacturability, and the timeline for scaling production of a first-of-its-kind power-generation technology. Role Classification and Working Conditions This is a salaried, exempt-level position. This position typically works in an office environment; and given the nature of our business is also exposed to operations/warehouses/production environments. Physical/Other Requirements • Ability to lift and/or move up to 50 pounds., • Ability to travel domestically, as needed, by plane, automobile, etc. approximately 30% of the time, Benefits: • Medical Plans, with PPO or HDHP options, • Dental Plans, with buy-up option, • Vision Plan, • Life Insurance and Accidental Death & Dismemberment Plans, with buy-up options, • Short Term Disability, paid for by the company, • Long Term Disability, paid for by the company, • Flexible Spending Accounts (FSA), • Health Savings Account (HSA), • 401k/Roth 401k, • Voluntary Accident Plans, • Voluntary Critical Illness Plans

Job DescriptionAbout us: Mythic is building the future of AI computing with breakthrough analog technology that delivers 100× the performance of traditional digital systems at the same power and cost. This unlocks bigger, more capable models and faster, more responsive applications—whether in edge devices like drones, robotics, and sensors, or in cloud and data center environments. Our technology powers everything from large language models and CNNs to advanced signal processing, and is engineered to operate from –40 °ree;C to +125 °ree;C, making it ideal for industrial, automotive, aerospace, and defense. We’ve raised over $100M from world-class investors including Softbank, Threshold Ventures, Lux Capital, and DCVC, and secured multi-million-dollar customer contracts across multiple markets. Mythic's Digital Design Team is seeking a Silicon Emulation Engineer to support the development and validation of AI accelerator and AI-centric SoCs using hardware emulation platforms. This role is critical to enabling early bring-up, software validation, and performance analysis of neural network accelerators prior to silicon availability. The engineer will work closely with RTL, verification, compiler, firmware, and ML software teams to ensure functional correctness, performance targets, and system-level integration of AI workloads.What You'll Do • Develop and maintain emulation platforms for AI accelerator / AI-centric SoCs, • Integrate large-scale RTL (compute, DMA, memory subsystems, interconnects) into emulation environments, • Enable early firmware, driver, runtime, and ML stack bring-up on emulated hardware, • Support execution of AI inference workloads (e.g., CNNs, transformers) on emulated Mythic accelerators, • Collaborate with compiler, runtime, and ML teams to debug HW/SW co-design issues, • Develop scripts and automation for emulation builds, regressions, and workload execution, • Analyze performance, bandwidth utilization, latency, and throughput of AI workloads in emulation, • Debug complex issues spanning RTL, firmware, drivers, and user-space ML frameworks, • Support post-silicon correlation and performance validation when applicable, • Document emulation flows, performance methodologies, and debug proceduresWhat We're Looking For, • Bachelor’s, Master's, or Doctorate degree in Electrical Engineering, Computer Engineering, Computer Science, or related field, • Strong understanding of SoC architectures and AI accelerator design concepts, • Experience with RTL simulation and emulation (Verilog/SystemVerilog), • Familiarity with hardware emulation platforms (e.g. Cadence Palladium), • Experience working in Linux-based environments, • Proficiency in scripting (Python, Tcl, Bash), • Strong debugging skills across hardware and software layersNice to Have, • Experience with NPU, DSP, or GPU-class accelerators, • Experience running or debugging ML inference workloads on pre-silicon platforms, • Knowledge of AI software stacks (runtime, compiler, graph execution), • Familiarity with DMA engines, memory hierarchies, and high-bandwidth interconnects, • Understanding of AXI/AMBA protocols and cache coherency, • Experience with FPGA prototyping or hybrid emulation flows, • Exposure to performance modeling or architectural trade-off analysisThe proposed salary range for this position is $120,000–$225,000 annually. Actual compensation depends on experience, skills, qualifications, and location.At Mythic, we foster a collaborative and respectful environment where people can do their best work. We hire smart, capable individuals, provide the tools and support they need, and trust them to deliver. Our team brings a wide range of experiences and perspectives, which we see as a strength in solving hard problems together. We value professionalism, creativity, and integrity, and strive to make Mythic a place where every employee feels they belong and can contribute meaningfully.

Job DescriptionAbout Paradromics Brain-related illness is one of the last great frontiers in medicine, not because the brain is unknowable, but because it has been inaccessible. Paradromics is building a brain-computer interface (BCI) platform that records brain activity at the highest possible resolution: the individual neuron. AI algorithms then decode this massive amount of brain-data, enabling the seamless translation of thought into treatments. Our first clinical application, the Connexus® BCI, will help people who are unable to speak, due to ALS, spinal cord injuries and stroke, to communicate independently through digital devices. However, the capabilities of our BCI platform go far beyond our first application. With the brain in direct communication with digital devices, we can leverage technology to transform how we treat conditions ranging from sensory and motor deficits to untreatable mental illness. The Role We are looking for an exceptional scientist/engineer to bridge the gap between silicon microfabrication and complex, real-world systems. While many can build a MEMS device in a vacuum, we need someone who understands the physics of integrating those devices into heterogeneous material stacks without compromising performance. You will span the disciplines of materials physics, thermomechanical simulation, and micro-assembly and testing to solve complex challenges in wafer-level and die-level bonding. You will be the primary technical owner of the interface between our core semiconductor devices and the macro-packaging world. Responsibilities • Lead the development of novel bonding processes (wafer-to-wafer, die-to-wafer) involving dissimilar materials., • Optimize protocols for various bonding processes including wafer bonding, diffusion bonding, laser bonding, and more, focusing on interface mechanics, intermetallic formation, and stress management., • Use FEA tools (COMSOL, ANSYS) to model thermal dissipation and perform thermomechanical analysis in multi-material stacks., • Oversee or execute cleanroom processes (lithography, deposition, etching) required to prepare surfaces for high-fidelity integration., • Utilize SEM, TEM, CSAM, and mechanical pull-testing to validate bond quality and reliability under thermal cycling., • Translate complex material requirements into specs for foundry partners or equipment vendors., • Collaborate with Electrical Engineering and Electrode Manufacturing teams to support infrastructure and integration needs., • Optimize development processes and translate them into manufacturing protocols.Required Qualifications, • Ph.D. or M.S. in Materials Science, Applied Physics, Mechanical Engineering, or Electrical Engineering., • 5+ years of hands-on experience in heterogeneous integration or advanced packaging., • Deep expertise in the physics and chemistry of adhesion and bonding with proven experience in at least two of the following: wafer bonding (fusion, anodic, eutectic), TLP (Transient Liquid Phase) bonding, or laser-assisted bonding., • A portfolio of work demonstrating the integration of silicon devices with non-silicon materials (e.g., ceramics, glass, metals, polymers, or III-V semiconductors)., • Proficiency in finite element analysis for thermal and structural mechanics., • Hands-on cleanroom experiences, specifically regarding surface activation and planarization (CMP) for bonding., • Hands-on experiences and knowledge with mechanical and electrical testing instruments, and building customized test setups.Preferred Qualifications, • Familiarity with the requirements and testing of hermetic packaging for MEMS, • Familiarity with methods and instruments for package and interface integrity characterization., • Familiarity with polymer-to-inorganic material adhesion and testing., • Experience designing micro-heaters or managing high-heat-flux devices. Paradromics is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, or national origin. Powered by JazzHR MdfB1h3sRL

Job DescriptionSenior Analog/Mixed-Signal Design Engineer focusing on high-performance analog-to-digital and digital-to-analog converters. The successful candidate in this role will do high performance transistor level design starting from initial specification, through design and layout supervision, silicon evaluation and characterization to final product introduction to market. Qualifications • 5+ years of experience in high-performance analog or mixed-signal IC development in advanced CMOS processes, • Thorough familiarity with high-speed, high-resolution analog-to-digital (ADC) or digital-to-analog (DAC) data converter design techniques. Experience in designing high performance building block circuits such as bandgap reference, op-amp, comparators, oscillators, DLL, PLL etc., • Must have a track record of successfully taking designs to production, • Must have experience with evaluating silicon on bench and familiarity with standard lab equipment, • Strong intuitive and analytical understanding of transistor-level circuit design including noise and mismatch analysis, • Experience with analog and digital behavioral modeling, and/or synthesis of digital control blocks, • Familiar with Cadence schematic capture, virtuoso, Spectre and/or HSPICE circuit simulation tools, • MATLAB understanding would be preferred but not mandatory, • Familiar with designing circuits for electromigration and ESD compliance in submicron CMOS process, • Must be familiar with layout parasitic extraction tools and layout dependent impairments in advanced CMOS processes, • Must be able to work independently, create and adhere to schedules, • Must possess strong written and verbal communication skills with an ability to work with teams spread across geographic locations

Job Description Ready to simulate success? Join our innovative team! Are you a problem-solver who thrives on tackling complex engineering challenges? Do you geek out over the power of simulation tools like Ansys to bring ideas to life? If so, we want you to be part of our cutting-edge team! At OsteoCentric Technologies, we’re redefining what’s possible. As an FEA (Finite Element Analysis) Engineer, you’ll have the opportunity to shape the future, working on groundbreaking projects that make a real impact. With access to state-of-the-art tools, a collaborative team of experts, and an environment that values innovation, this is your chance to flex your technical muscles and take your career to the next level. The FEA Engineer is responsible for performing advanced simulation and analysis using Ansys software (Mechanical, Motion, LS-DYNA, or optiSLang) to support product design and development. They will perform complex simulations, analyze results, and offer optimization recommendations for OsteoCentric products in the Medical Device and Industrial spaces. This role requires a proactive, collaborative engineer with experience in finite element analysis (FEA), dynamic modeling, or optimization processes, capable of working cross-functionally to drive innovation and product quality. This position is required to work in our North Austin office. In this role you will: • Develop, set up, and execute simulation models using Ansys Mechanical, Ansys Motion, Ansys LS-DYNA, or Ansys optiSLang, depending on project requirements., • Perform finite element analysis (FEA) for structural, thermal, and/or dynamic simulations, and provide insights for design improvements., • Collaborate with design, R&D, and product development teams to define simulation requirements and translate them into functional models., • Analyze and interpret simulation results, generating comprehensive reports to inform engineering and design decisions., • Conduct sensitivity and optimization studies using Ansys tools to ensure robustness and reliability in product design., • Troubleshoot and validate models to ensure accuracy and alignment with real-world testing and performance., • Participate in product testing and validation to correlate simulation data with physical data., • Stay current with advances in simulation technology and incorporate new methodologies to enhance simulation capabilities., • Prepare, deliver, and support technical presentations, publications, and IP filings based on the learnings from simulations, for both internal and external audiences., • Function as simulation Subject Matter Expert (SME), including training others on the mechanics and use of simulation tools, administrating and coordinating licenses and subscriptions, and recommending appropriate hardware., • Strong understanding of finite element analysis (FEA) and dynamic modeling principles., • Proficiency in developing, validating, and optimizing complex simulation models., • Familiarity with multi-physics simulation, particularly structural, thermal, and/or dynamic analyses., • Knowledge of scripting languages (e.g., Python) and familiarity with CAD software (e.g. SolidWorks)., • Strong analytical, problem-solving, and decision-making abilities., • Excellent verbal and written communication skills, with the ability to create clear and actionable reports., • Bachelor’s degree in Mechanical Engineering, Aerospace Engineering, or Biomedical Engineering (with Mechanical concentration) from an accredited institution. Graduate degrees and certificates are preferred., • Minimum of 5 years of experience in engineering simulation, specifically with Ansys tools. UnifiMI Industrial was founded in 2024 and is a wholly-owned subsidiary of OsteoCentric Technologies. OsteoCentric was founded in 2015 to design, develop and innovate new advanced medical device technologies. Our flagship UnifiMI technologies have revolutionized the implant to bone interface utilizing both patented minimally invasive bone preparation technology and unique next-generation thread geometries. Our goal is to leverage MIS technology to significantly improve and accelerate a patient’s path to recovery. Our two state-of-the-art global innovation headquarters are located in Austin, Texas and Logan, Utah. Fun facts about us: • 70+ patents globally, • 100,000+ surgical implants used, • Devices in 90+ level one trauma centers, • 20 FDA Clearances and counting, • 11 Commercialized Products Benefits: • Significant employer contributions to Health, Vision, and Dental plans, • A fully employer-sponsored life insurance plan, • Voluntary: Additional Life/AD&D Insurance, Long Term Disability, Short-Term Disability, Accident Insurance, Critical Illness Insurance, and Hospital Indemnity Insurance, • 401(k) Plan, • 15 days of Paid Time Off (PTO), • 8 Holidays + 2 Floating Holidays of your choice, • We do not accept applications from third-party recruiters or staffing agencies., • We cannot sponsor work visas. Applicants must have authorization to work in the United States without sponsorship.

Job DescriptionLast Energy is seeking an experienced Thermofluids Engineer for the development of thermal systems components within our comprehensive Power Plant System. The successful candidate will leverage their expertise in Computational Fluid Dynamics (CFD), and system-level codes to perform in-depth multiscale analyses of heat transfer in internal turbulent flows at both the component and system levels. Key Duties & Responsibilities • Application of standard methods of design and analysis to provide pragmatic engineering solutions to fluid and heat transfer systems across the plant, • Perform steady-state/transient fluid flow and heat transfer analysis of industrial turbulent systems at the component (equipment) and system (plant) levels, • Model and simulate single and multiphase flows, • Experience with system codes - MELCOR, RELAP, etc. preferred but not required, • 2D/3D Component level analysis through the use of Finite Volume Method (CFD) codes with and without high-performance computing resources, • 1D system-level analysis via “system” codes, dynamic process simulators, and/or heat and flow network codes, • Conduct thorough validation and verification of numerical models, ensuring accuracy and reliability in simulation results, • Aid in the design of laboratory and rig-scale experiments for verification and validation of thermal systems, • Develop system/component design requirements and acceptance criteria in line with best practices and regulatory guidance, • Oversight of external Scopes of Work and academic activitiesQualifications, • Bachelor's degree in Mechanical or Chemical Engineering, • Masters or PhD degree in Mechanical or Chemical Engineering is preferred, • 5+ years of experience in a relevant profession, • Experience with computational simulation tools, such as ANSYS/CFX/Fluent, OpenFOAM, COMSOL, MATLAB, Simulink, Simscape, Modelica, Aspen, Python, or StarCCM+, • Programming experience for providing numerical solutions is preferred, • Potential Fluid-Structure Interaction (FSI) coupled analysis between FEA and CFD codes for challenging structural problems is preferred, • Experience with standard “hand-calculation” engineering design methods for scoping and verification activities, • Proficiency in utilizing advanced optimization techniques to enhance thermal system performance, • Strong analytical and problem-solving skills, • Excellent communication skills and the ability to work in cross-functional teams, • Creative thinking and a passion for innovation in thermal design

Job DescriptionSaronic Technologies is a leader in revolutionizing autonomy at sea, dedicated to developing state-of-the-art solutions that enhance maritime operations through autonomous and intelligent platforms. We are seeking a Structures Engineer to join our innovative team. The successful candidate will lead the structural design efforts for our advanced maritime technologies, ensuring the integrity and reliability of our autonomous surface vessels (ASVs).Responsibilities • Own structural design of ASV systems and/or subsystems from concept through prototyping and production efforts, • Maintain and track design gates (PDR, CDR) and schedules for owned hardware, • Prepare and conduct design reviews of owned structural systems/subsystems, • Support initial prototyping and build of new ASV platforms and variants, • Support procurement of prototype hardware and supplier selection process, • Produce engineering design definition artifacts to include:, • 3d models in Siemens NX (preferred), orSolidworks, • 2d drawings that comply with applicable standards (ASME Y14.5), • Conduct preliminary structural sizing by performing hand calculations based on engineering first principles with respect to design requirements., • Collaborate with hardware, product development, and production to optimize designs based on understood and discovered load cases., • Generate comprehensive technical reports and documentation to communicate design decisions, recommendations, and rationale to internal teams and stakeholders Qualifications, • Bachelor’s degree or greater in Mechanical Engineering or a related field, • 2+ years experience in structural analysis and simulation, using both stress hand calculations and finite element analysis (FEA) software such as Femap (preferred) or ANSYS., • Strong understanding of structural mechanics and materials science, with experience applying these concepts to real-world engineering problems., • Demonstrated ability to lead and mentor junior engineers, providing technical guidance and expertise in structural analysis methodologies and best practices., • Excellent problem-solving skills and a track record of innovative thinking to address challenging engineering issues., • Effective communication skills with the ability to convey complex technical concepts clearly and concisely to diverse audiences.

Job DescriptionPlease Note: To conform with the United States Government Space Technology Export Regulations, the applicant must be a U.S. citizen, lawful permanent resident of the U.S., conditional resident, asylee or refugee (protected individuals as defined by 8 U.S.C. 1324b(a)(3)), or eligible to obtain the required authorizations from the U.S. Department of State. At CesiumAstro, we are developers and pioneers of out-of-the-box communication systems for satellites, UAVs, launch vehicles, and other space and airborne platforms. We take pride in our dynamic and cross-functional work environment, which allows us to learn, develop, and engage across our organization. If you are looking for hands-on, interactive, and autonomous work, CesiumAstro is the place for you. We are actively seeking passionate, collaborative, energetic, and forward-thinking individuals to join our team. We are seeking a Principal Power Electronics Engineer I (2025538) to join our growing spacecraft payload development team. In this position, you will contribute across the entire development lifecycle of next-generation power electronics hardware for satellites and space power systems payloads—from leading the definition of power system architectures and trade studies to detailed circuit design, simulation, printed circuit board (PCB) layout, verification and integration testing, production transition, and manufacturing support. DUTIES AND RESPONSIBILITIES * Define electrical power system architecture, and derive power subsystem requirements * Design DC-DC power converters, motor drives, inverters, power management and control circuits from concept to production release * Perform detailed design for low to high complexity analog and power electronics circuits ranging from single DC-DC power converters to multi-output power supply modules * Perform modeling and analysis of analog and power electronics designs including worst-case circuit analysis (WCA), stress analysis, small signal modeling analysis, failure modes and effects analysis (FMEA), reliability analysis, and power integrity analysis * Develop design verification test plans, requirement compliance matrices, system integration and qualification test plans, and production acceptance test plans for power converters and power supply designs * Lead board bring-up and design verification testing of power electronics circuits and modules * Lead system integration, qualification campaigns, and release of analog and power electronics designs into production * Mentor younger engineers and foster knowledge sharing * Lead a small team of power electronics engineers to drive project execution * Perform research and monitor power electronics industry trends to drive innovation and generate intellectual property in this area REQUIREMENTS AND MINIMUM QUALIFICATIONS * Bachelor of Science (BS) degree or higher in Electrical Engineering (or related) from an accredited university. * Minimum of 9 years of experience designing analog and power electronics * Experience working with electrical power systems and subsystems, including developing power architecture and power requirements, performing trade studies for size, weight, power, and cost optimization (SWAP-C), selecting power converter topologies, and defining power management and control blocks * Experience with modeling and control of DC-DC converters and power stage design of different isolated and non-isolated DC-DC power converters (e.g. discrete linear regulators, Buck, Boost, Buck-boost, Flyback, Forward, Half-bridge, Full bridge, and Resonant converters) * Experience designing custom signal and power magnetics, and power filters for low noise and electromagnetic compatibility (EMC) * Experience developing design verification test plans, requirement compliance matrices, system integration and qualification test plans, and production acceptance test plans * Experience performing worst-case circuit analysis (WCA), stress analysis, failure modes and effects analysis (FMEA), and reliability analysis for power supplies * Extensive hands-on experience with testing and troubleshooting electronics and power converters using laboratory instruments such as oscilloscopes, impedance analyzers, spectrum analyzers, electronic loads, and signal generators * Experience with electronics schematic capture and printed circuit board (PCB) layout tools such as Altium, OrCAD, Allegro or Xpedition * Experience with analysis and simulation tools such as SPICE, LTSPICE, SIMetrix/SIMPLIS, PLECS, Simulink, MATLAB, MathCAD, ANSYS Q3D and SiWave, or HyperLynx * Excellent written and verbal communication skills PREFERRED EXPERIENCE * Master of Science or PhD in Electrical Engineering with research focus in power electronics * Experience designing high-reliability analog and power electronics for automotive, space or defense applications * Knowledge of space radiation environments and radiation effects in electronics * Experience in power electronics applications utilizing GaN or SiC wide bandgap power semiconductor devices * Experience running board-level power integrity simulation using tools such as Ansys SiWave, or HyperLynx * Experience with soft switching and resonant power converter topologies (e.g. LLC, CLLC, series resonant, phase shifted full bridge, dual active bridge, etc.) * Experience with power stage design for inverters and motor drives * Knowledge of modeling and control of inverters and motor drives * Experience with advanced control schemes for DC-DC power converters (e.g. voltage mode with feedforward control, constant on-time control, V2 constant on-time control, phase shift modulation, average current mode control) * Experience with isolation and grounding, failure mode effects analysis and fault tolerant design, and thermal management of power electronics * Programming skills to support hardware test and data processing (Python, MATLAB, etc.) * Knowledge of maximum power point tracking (MPPT) for solar power applications, battery sizing and battery management systems, power conversion for electric propulsion systems, power conditioning, power management, and power distribution units for spacecraft technology * Experience designing and testing power electronics units to meet industry standards and requirements in the automotive, industrial, space or military markets (e.g., FCC, CISPR, UL safety, ECSS, NASA, MIL standards) CesiumAstro considers several factors when extending an offer, including but not limited to, the role and associated responsibilities, a candidate’s work experience, education/training, and key skills. Full-time employment offers include company stock options and a generous benefits package including health, dental, vision, HSA, FSA, life, disability and retirement plans. CesiumAstro is an Equal Opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, protected Veteran Status, or any other characteristic protected by applicable federal, state, or local law. Please note: CesiumAstro does not accept unsolicited resumes from contract agencies or search firms. Any unsolicited resumes submitted to our website or to CesiumAstro team members will be considered property of CesiumAstro, and we will not be obligated to pay any referral fees. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job DescriptionAnalog/Mixed-Signal Design Engineer focusing on high-performance analog-to-digital and digital-to-analog converters. The successful candidate in this role will design high performance transistor level circuits starting from initial specification, through design and layout supervision, silicon evaluation and characterization to final product introduction to market. Qualifications • 2+ years of experience in high-performance analog or mixed-signal IC development in advanced CMOS processes, • Familiarity with high-speed, high-resolution analog-to-digital (ADC) or digital-to-analog (DAC) data converter design and building block circuits such as bandgap reference, op-amp, comparators, oscillators, DLL, PLL etc., • Must have experience with evaluating silicon on bench and familiarity with standard lab equipment, • Strong intuitive and analytical understanding of transistor-level circuit design including noise and mismatch analysis, • Experience with analog and digital behavioral modeling, • Familiar with Cadence schematic capture, virtuoso, Spectre and/or HSPICE circuit simulation tools, • Must be familiar with layout parasitic extraction tools and layout dependent impairments in advanced CMOS processes, • Must be able to work independently, create and adhere to schedules, • Must possess strong written and verbal communication skills with an ability to work with teams spread across geographic locations