Trabajos structural welder en San Diego, CaliforniaCrear alertas

About the Organization IMIA,LLC is the only national marine surface preparation painting contractor servicing every U.S. Port with a mobile full time workforce that ensures that a quality product is delivered on time every time. IMIA, LLC has the equipment, seasoned deckplate supervision and mechanics, as well as rigorous corporate safety and quality programs and financial strength to support our customer's preservation needs in a truly superior and comprehensive fashion. IMIA, LLC offers a comprehensive benefit package to eligible employees. Eligible employees may enroll in: • Health, • Dental, • Vision, • Life, • LTD, • Accident, • Critical Illness, • 401k Employees and their household members are also eligible to participate in the company's Employee Assistance Program. Per Diem OR Dislocation Allowance may be provided to eligible employees to reimburse some or all of the cost an employee might be reasonably expected to incur for lodging, meals, and incidental expenses while traveling out of town for work. EOE Statement IMIA, LLC is an equal opportunity employer and provides equal employment opportunities (EEO) to all employees regardless of race, color, religion, gender, gender identity or expression, national origin, sexual orientation, age, sex, disability status, marital status, status as a covered veteran, genetics, or any other protected groups under state, federal or local Equal Opportunity Laws. This policy applies to all terms and conditions of employment including but not limited to hiring, placement, promotion, termination, layoff, recall, transfer, leave of absence, compensation, and training. Description Job title: Structural Welder Reports to: Production Superintendent PAY RANGE: $25 - $35 per hour (DOE) Job Overview Responsible for welding of steel, aluminum and stainless-steel materials using the SMAW, GTAW and/or GMAW processes in all positions. Required to perform miscellaneous tasks, as assigned by his or her supervisor. Education • Ensure work is done safely and meets quality standards, • Set up welding machines based on the job at hand or using a Welding Procedure Specification, • Must have own basic skill related tools and equipment if not supplied by the workplace, • Weld steel, aluminum and stainless steel components based on the required weld processes and parameters, • Adhere to the specific welding procedure specifications, • Set up welding cells for serial production runs, • Keep work areas clean and organized and take proper care of all equipment and facilities, • Follow all company rules and policies, • Provide a great level of attention to detail and focus on the given task, • Follow all safety rules and quality standards, • Work with team members to maximize productivity and efficiency, • Assist in the preparation of product for shipment, • Report any unsafe work conditions or practice to supervisor, • Six months to one-year related experience and/or training, • Experience with steel, aluminum and/or stainless steel required, • Experience with SMAW, GTAW and GMAW welding highly preferred, • Ability to follow instructions given both verbally and in written form, • Willingness to learn and work to the best of his/her abilities and have a dependable work ethic, • Knowledge of welding equipment and associated tooling including proper set up and use, • Ability to read and interpret documents furnished in written, oral, diagram or schedule form including but not limited to safety rules, operating and maintenance instructions, quality manuals and procedure manuals, • Familiarity with the metric system, • Ability to stand continuously for long periods of time, • Willing to work 40+ hours a week, • Pass substance abuse testing, • \nReasonable Accommodations may be made to enable qualified individuals with disabilities to perform essential job functions.\n\n Location California Salary Range $25 - $35 per hour (DOE) Exempt/Non-Exempt Non-Exempt This position is currently accepting applications.

About the Organization Founded in 1994 as a small, diversified professional services company, Delphinus today employs more than 650 professional and technical personnel supporting a customer base that spans the Defense and Federal markets. Headquartered in Newtown Square, PA, we have primary offices in Norfolk, VA; San Diego, CA; and Bremerton, WA. Company Benefits*: • Comprehensive health program for employee and dependents, • Company paid Dental and Vision, • 401(k) with company match, • Short-term and Long-term disability - Company paid, • Life Insurance and AD&D - Company paid, • Voluntary Spouse and Child Life Insurance, • Paid time off with company holiday, • Tuition Reimbursement Description Position Location: Chula Vista, CA Summary: Using welding/cutting equipment and various power and hand tools, the welder performs a variety of shop and shipboard welding trade functions. These functions include the repair and/or removal of old structural materials, the installation of new structural materials and complete fabrication of complex structural, mechanical and equipment foundations. Works under direct supervision and performs related work as required. Duties and Responsibilities include the following. Other duties may be assigned. • Applies basic welding processes to join, surface, fabricate, or repair parts of metal or other weldable materials., • Qualified in basic Shielded Metal Arc (SMAW) for various combinations of steel in all positions or Gas Metal Arc (GMAW) for aluminum (spray and pulsed transfer), • Works from blueprints, engineering sketches, and specification requirements to determine materials and construction process required to fabricate component parts to develop a complete unit as designed;, • May position pieces to be welded into jigs, holding fixtures, guides, and steps using measuring instruments and hand tools;, • Knowledge of the processes and procedures necessary for the proper removal of old equipment and foundations with minimal damage to surrounding materials., • Maintain certification in the welding procedure(s) as required by Quality Assurance Manager., • Fill out Objective Quality Evidence (OQE) forms, • Follow Quality Assurance welding procedures, • Performs all work in accordance with established safety procedures., • Participates in special projects as required.\n\n Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Language Ability: Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Math Ability: Requires basic math skills such as adding, subtracting, multiplying, division and fractions Reasoning Ability: Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. Computer Skills: Must possess basic computer skills to enter data into different data basis. Education/Experience: • Typically requires 1+ years related experience., • High School Diploma or GED, plus technical/vocational training or the equivalent combination., • Experience working in the marine welding/fitter trade gained through a formal apprenticeship or equivalent training is preferred., • Thorough knowledge of welding standards of SMAW, GMAW, GTAW and/or FCAW welding procedures., • Skill to make complete penetration and complete fusion welds. Equipment: • General Hand Tools, • Welding Machines, • Precision Measuring Instruments, • Pneumatic and Electric Hand Tools, • Knowledge, Skills and Other Abilities:, • Must have the ability to read and interpret blueprints, sketches, written technical instructions and manuals., • Must possess working knowledge of welding procedures and tools., • Knowledge of welding shrinkage, welding techniques and physical properties of metal., • Ability to qualify using welding procedures on plate and/or pipe., • Must be able to pass Workmanship Inspection training., • Must be able to read and understand material safety data sheets (MDS)., • Able to follow safety procedures.\n\n Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is required on a regular basis to stand, walk, sit, use hands, reach with hands and arms, climb, balance, stoop, kneel, crouch, crawl, talk and/or hear. Frequently the employee is required to carry objects that might weigh up to 50 pounds. The employee must be able to pass the vision test. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee will be working in a shipboard environment. The employee is occasionally exposed to work near moving mechanical parts or working in a confined space. The employee is regularly exposed to fumes or airborne particles. The noise level in the work environment is usually moderate. Wage Range: $21.83 - $38.00 In determining compensation, various factors will be considered, including but not limited to, educational background; relevant experience, knowledge, skills, and abilities, market factors; and geographic location. EOE Statement We are an equal employment opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status or any other characteristic protected by law. Exempt/Non-Exempt Non-Exempt Req Number WEL-26-00008 This position is currently accepting applications.

Job DescriptionAbout VetPowered: VetPowered, LLC, named Veteran Owned Small Business of the Year in the United States, is a rapidly growing San Diego-based corporation specializing in manufacturing, welding, fabrication, machinery repair, and customized training under private and U.S. Government contracts. VetPowered employs a highly trained workforce utilizing advanced CNC equipment. The company is focused on strengthening and supporting advanced manufacturing in the United States. Key Job Functions: At VetPowered, the Welder Fabricator is responsible for performing welding and metal fabrication work in support of shop operations and custom projects. This role requires strong technical skills, attention to detail, and the ability to work both independently and as part of a team. Work includes building, repairing, and modifying metal components and equipment based on drawings, samples, or direction. The position supports a mission-driven organization that values precision, professionalism, and service to the veteran community. Essential Duties and Responsibilities:• Perform certified welding and fabrication work to industry standards; a current, verifiable welding certification is required (not entry-level or hobby experience) • Measure, cut, fit, form, and shape metal components safely and accurately, • Perform TIG, MIG, and Stick welding on mild steel, stainless steel, aluminum, and specialty alloys including Inconel and Monel, • Build and repair welded structures, components, and equipment from drawings, samples, or direction, • Fabricate carts, pallets, trailers, bumpers, and custom metal projects using a range of materials and structural shapes, • Operate fabrication equipment including band saws, cold saws (manual, semi-automatic, and automatic), mills, shears, hydraulic brakes, plasma cutters, and related tools, • Utilize CNC equipment such as CNC shears, CNC press brakes, tube notchers, abrasive notchers, and other metalworking machinery as required, • Support and guide others as needed to ensure work is completed safely, accurately, and on schedule, • Load and unload equipment and materials safely onto vehicles and trailers; assist with pickup and delivery of materials as needed, • Operate a forklift safely or obtain forklift certification within a reasonable timeframe, • Work effectively across multiple projects while maintaining quality and attention to detail, • Communicate clearly and professionally with team members and leadership; identify issues and provide practical solutions, • Follow all company, state, and federal safety policies and procedures • Valid driver’s license with reliable transportation to and from the worksite, • Current or previous MIG and TIG welding certifications; must be able to requalify or certify within two (2) weeks of hire, • Successful completion of an entrance welding examination in MIG, TIG, and Stick welding on mild steel, aluminum, and stainless steel, including fabrication of a test piece, • Strong communication skills; experience with prototype development or jig design is a plus, • Eligibility to obtain a DBIDS Clearance, including the ability to meet background requirements, • Compliance with all applicable company, state, and federal safety regulations, • Attention to Detail- The ability to accomplish a task while demonstrating a thorough concern for all the areas involved, no matter how small., • All In-Brings their whole self to work and giving it their all no matter how difficult the job or situation., • Accountable- Taking personal responsibility for their work, owns mistakes, communicate honestly rather than hiding the truth, does not blame others or make excuses., • Adaptable- Easily adjusts to changing circumstances. Pay: The range of pay for this California-based position is $38.00 - 43.00 per hour. Incentive Compensation: Potential for bonus or incentive compensation after one full year of employment. The actual compensation offer will carefully consider a wide range of factors including skills, qualifications, experience, and location. If your experience differs from what is listed but you believe you can add value to VetPowered, you are encouraged to apply. Schedule: This position is Monday-Friday, 7:00am-3:30pm. Occasional weekends or schedule adjustments may be required to support Company goals and production needs. Benefits and Perks: VetPowered makes available comprehensive benefits the 1st of the month, following the date of hire. Options include Medical (50% employer contribution), dental and vision coverage (100% employer contribution), a 401k program with employer match up to $1,000 per year, 8 paid holidays, and paid time off. While the Company intends to maintain these employee benefits, it reserves the absolute right to modify, amend or terminate these benefits at any time and for any reason. Dress code: Position is provided VetPowered uniforms, and laundry service. Because the dress code does vary by position and department, please consult with your hiring manager to confirm your applicable dress code at the time of hire. Supervisory: None Physical Requirements: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk or hear. The employee frequently is required to stand; sit; walk; use hands to finger, handle or feel; and reach with hands and arms. The employee is regularly required to push, move, lift or otherwise bear 10-30lbs (35-75lb W/M). Applications may include but are not limited to repetitive work using a computer keyboard, mouse and headphones while sitting and/or standing at an assigned work desk area. Work Environment: The employee works in a contract manufacturing facility in an urban industrial neighborhood. Other areas within the facility are mixed use such as administration, classrooms, welding, and machining areas. Employee may have additional environmental hazards such as: chemical, electrical, flammable, or mechanical in nature. E-Verify Compliance Statement: VetPowered, LLC participates in the E-Verify program. We ensure employment eligibility of all employees by using the E-Verify electronic verification system. Policy for Discrimination, Harassment and Retaliation Prevention: VetPowered, LLC is committed to providing a professional work environment free from discrimination and harassment, including discrimination and harassment based on a protected characteristic, and an environment free from retaliation for participating in any protected activity covered by this policy. VetPowered, LLC employees are expected to assume responsibility for maintaining a work environment that is free from discrimination, harassment, and retaliation. Employees are encouraged to promptly report conduct that they believe violates this policy so that we have an opportunity to address and resolve any concerns. Managers and supervisors are required to promptly report conduct that they believe violates this policy. We are committed to responding to alleged violations of this policy in a timely and fair manner and to taking appropriate action aimed at ending the prohibited conduct. EEO Statement: VetPowered, LLC is committed to providing equal employment opportunities to all employees, applicants, unpaid interns, and volunteers without regard to actual or perceived: race (including hair texture or protected hairstyles, e.g. braids, locks, and twists), color, religion, religious creed (including religious dress and grooming practices), national origin (including language use restrictions), ancestry, citizenship, disability (mental and physical) including HIV and AIDS, medical condition (including cancer and genetic characteristics), genetic information, marital status, sex (including pregnancy, childbirth, breastfeeding, or related medical conditions), gender, gender identity, gender expression, age (40 years and over), sexual orientation, veteran and/or military status, family and medical leave status, domestic violence victim status, political affiliation, and any other status protected by federal, state, or local law. All openings are subject to change without notice, due to the volume of applications / resumes received, we are unable to respond to status inquiries. Please be assured that your information is being properly handled and forwarded to the appropriate hiring staff. If your skills and qualifications meet the needs of the job, you will be contacted. Powered by JazzHR uqoVAebrMC

About VetPowered: VetPowered, LLC, named Veteran Owned Small Business of the Year in the United States, is a rapidly growing San Diego-based corporation specializing in manufacturing, welding, fabrication, machinery repair, and customized training under private and U.S. Government contracts. VetPowered employs a highly trained workforce utilizing advanced CNC equipment. The company is focused on strengthening and supporting advanced manufacturing in the United States. Key Job Functions: At VetPowered, the Welder Fabricator is responsible for performing welding and metal fabrication work in support of shop operations and custom projects. This role requires strong technical skills, attention to detail, and the ability to work both independently and as part of a team. Work includes building, repairing, and modifying metal components and equipment based on drawings, samples, or direction. The position supports a mission-driven organization that values precision, professionalism, and service to the veteran community. Essential Duties and Responsibilities:• Perform certified welding and fabrication work to industry standards; a current, verifiable welding certification is required (not entry-level or hobby experience) • Measure, cut, fit, form, and shape metal components safely and accurately, • Perform TIG, MIG, and Stick welding on mild steel, stainless steel, aluminum, and specialty alloys including Inconel and Monel, • Build and repair welded structures, components, and equipment from drawings, samples, or direction, • Fabricate carts, pallets, trailers, bumpers, and custom metal projects using a range of materials and structural shapes, • Operate fabrication equipment including band saws, cold saws (manual, semi-automatic, and automatic), mills, shears, hydraulic brakes, plasma cutters, and related tools, • Utilize CNC equipment such as CNC shears, CNC press brakes, tube notchers, abrasive notchers, and other metalworking machinery as required, • Support and guide others as needed to ensure work is completed safely, accurately, and on schedule, • Load and unload equipment and materials safely onto vehicles and trailers; assist with pickup and delivery of materials as needed, • Operate a forklift safely or obtain forklift certification within a reasonable timeframe, • Work effectively across multiple projects while maintaining quality and attention to detail, • Communicate clearly and professionally with team members and leadership; identify issues and provide practical solutions, • Follow all company, state, and federal safety policies and procedures • Valid driver’s license with reliable transportation to and from the worksite\n, • Current or previous MIG and TIG welding certifications; must be able to requalify or certify within two (2) weeks of hire\n, • Successful completion of an entrance welding examination in MIG, TIG, and Stick welding on mild steel, aluminum, and stainless steel, including fabrication of a test piece\n, • Strong communication skills; experience with prototype development or jig design is a plus\n, • Eligibility to obtain a DBIDS Clearance, including the ability to meet background requirements\n, • Compliance with all applicable company, state, and federal safety regulations\n, • U.S. Citizenship or Permanent Resident Status required\n\n Mission and Values: Contribute to achievement of the Mission and Vision of our organization by being: \n\n • \nAttention to Detail- The ability to accomplish a task while demonstrating a thorough concern for all the areas involved, no matter how small.\n, • \nAll In-Brings their whole self to work and giving it their all no matter how difficult the job or situation.\n, • \nAccountable- Taking personal responsibility for their work, owns mistakes, communicate honestly rather than hiding the truth, does not blame others or make excuses.\n, • \nAdaptable- Easily adjusts to changing circumstances.\n, • \nAlways Improving- A constant, ongoing effort to improve something. This 'something' can be a product, a service, one's skill set, or a team's way of working.\n\n Important Notes Position Details: This is a full-time hourly (non-exempt) position (40+ hours/week). Overtime applies based on workload and production needs. Pay: The range of pay for this California-based position is $38.00 - 43.00 per hour. Incentive Compensation: Potential for bonus or incentive compensation after one full year of employment. The actual compensation offer will carefully consider a wide range of factors including skills, qualifications, experience, and location. If your experience differs from what is listed but you believe you can add value to VetPowered, you are encouraged to apply. Schedule: This position is Monday-Friday, 7:00am-3:30pm. Occasional weekends or schedule adjustments may be required to support Company goals and production needs. Benefits and Perks: VetPowered makes available comprehensive benefits the 1st of the month, following the date of hire. Options include Medical (50% employer contribution), dental and vision coverage (100% employer contribution), a 401k program with employer match up to $1,000 per year, 8 paid holidays, and paid time off. While the Company intends to maintain these employee benefits, it reserves the absolute right to modify, amend or terminate these benefits at any time and for any reason. Dress code: Position is provided VetPowered uniforms, and laundry service. Because the dress code does vary by position and department, please consult with your hiring manager to confirm your applicable dress code at the time of hire. Supervisory: None Physical Requirements: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk or hear. The employee frequently is required to stand; sit; walk; use hands to finger, handle or feel; and reach with hands and arms. The employee is regularly required to push, move, lift or otherwise bear 10-30lbs (35-75lb W/M). Applications may include but are not limited to repetitive work using a computer keyboard, mouse and headphones while sitting and/or standing at an assigned work desk area. Work Environment: The employee works in a contract manufacturing facility in an urban industrial neighborhood. Other areas within the facility are mixed use such as administration, classrooms, welding, and machining areas.

About VetPowered: VetPowered, LLC, named Veteran Owned Small Business of the Year in the United States, is a rapidly growing San Diego-based corporation specializing in manufacturing, welding, fabrication, machinery repair, and customized training under private and U.S. Government contracts. VetPowered employs a highly trained workforce utilizing advanced CNC equipment. The company is focused on strengthening and supporting advanced manufacturing in the United States. Key Job Functions: At VetPowered, the Welder Fabricator is responsible for performing welding and metal fabrication work in support of shop operations and custom projects. This role requires strong technical skills, attention to detail, and the ability to work both independently and as part of a team. Work includes building, repairing, and modifying metal components and equipment based on drawings, samples, or direction. The position supports a mission-driven organization that values precision, professionalism, and service to the veteran community. Essential Duties and Responsibilities:• Perform certified welding and fabrication work to industry standards; a current, verifiable welding certification is required (not entry-level or hobby experience) • Measure, cut, fit, form, and shape metal components safely and accurately, • Perform TIG, MIG, and Stick welding on mild steel, stainless steel, aluminum, and specialty alloys including Inconel and Monel, • Build and repair welded structures, components, and equipment from drawings, samples, or direction, • Fabricate carts, pallets, trailers, bumpers, and custom metal projects using a range of materials and structural shapes, • Operate fabrication equipment including band saws, cold saws (manual, semi-automatic, and automatic), mills, shears, hydraulic brakes, plasma cutters, and related tools, • Utilize CNC equipment such as CNC shears, CNC press brakes, tube notchers, abrasive notchers, and other metalworking machinery as required, • Support and guide others as needed to ensure work is completed safely, accurately, and on schedule, • Load and unload equipment and materials safely onto vehicles and trailers; assist with pickup and delivery of materials as needed, • Operate a forklift safely or obtain forklift certification within a reasonable timeframe, • Work effectively across multiple projects while maintaining quality and attention to detail, • Communicate clearly and professionally with team members and leadership; identify issues and provide practical solutions, • Follow all company, state, and federal safety policies and procedures • Valid driver’s license with reliable transportation to and from the worksite\n, • Current or previous MIG and TIG welding certifications; must be able to requalify or certify within two (2) weeks of hire\n, • Successful completion of an entrance welding examination in MIG, TIG, and Stick welding on mild steel, aluminum, and stainless steel, including fabrication of a test piece\n, • Strong communication skills; experience with prototype development or jig design is a plus\n, • Eligibility to obtain a DBIDS Clearance, including the ability to meet background requirements\n, • Compliance with all applicable company, state, and federal safety regulations\n, • U.S. Citizenship or Permanent Resident Status required\n\n Mission and Values: Contribute to achievement of the Mission and Vision of our organization by being: \n\n • \nAttention to Detail- The ability to accomplish a task while demonstrating a thorough concern for all the areas involved, no matter how small.\n, • \nAll In-Brings their whole self to work and giving it their all no matter how difficult the job or situation.\n, • \nAccountable- Taking personal responsibility for their work, owns mistakes, communicate honestly rather than hiding the truth, does not blame others or make excuses.\n, • \nAdaptable- Easily adjusts to changing circumstances.\n, • \nAlways Improving- A constant, ongoing effort to improve something. This 'something' can be a product, a service, one's skill set, or a team's way of working.\n\n Important Notes Position Details: This is a full-time hourly (non-exempt) position (40+ hours/week). Overtime applies based on workload and production needs. Pay: The range of pay for this California-based position is $38.00 - 43.00 per hour. Incentive Compensation: Potential for bonus or incentive compensation after one full year of employment. The actual compensation offer will carefully consider a wide range of factors including skills, qualifications, experience, and location. If your experience differs from what is listed but you believe you can add value to VetPowered, you are encouraged to apply. Schedule: This position is Monday-Friday, 7:00am-3:30pm. Occasional weekends or schedule adjustments may be required to support Company goals and production needs. Benefits and Perks: VetPowered makes available comprehensive benefits the 1st of the month, following the date of hire. Options include Medical (50% employer contribution), dental and vision coverage (100% employer contribution), a 401k program with employer match up to $1,000 per year, 8 paid holidays, and paid time off. While the Company intends to maintain these employee benefits, it reserves the absolute right to modify, amend or terminate these benefits at any time and for any reason. Dress code: Position is provided VetPowered uniforms, and laundry service. Because the dress code does vary by position and department, please consult with your hiring manager to confirm your applicable dress code at the time of hire. Supervisory: None Physical Requirements: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk or hear. The employee frequently is required to stand; sit; walk; use hands to finger, handle or feel; and reach with hands and arms. The employee is regularly required to push, move, lift or otherwise bear 10-30lbs (35-75lb W/M). Applications may include but are not limited to repetitive work using a computer keyboard, mouse and headphones while sitting and/or standing at an assigned work desk area. Work Environment: The employee works in a contract manufacturing facility in an urban industrial neighborhood. Other areas within the facility are mixed use such as administration, classrooms, welding, and machining areas.

About the Organization Founded in 1994 as a small, diversified professional services company, Delphinus today employs more than 650 professional and technical personnel supporting a customer base that spans the Defense and Federal markets. Headquartered in Newtown Square, PA, we have primary offices in Norfolk, VA; San Diego, CA; and Bremerton, WA. Company Benefits*: • Comprehensive health program for employee and dependents, • Company paid Dental and Vision, • 401(k) with company match, • Short-term and Long-term disability - Company paid, • Life Insurance and AD&D - Company paid, • Voluntary Spouse and Child Life Insurance, • Paid time off with company holiday, • Tuition Reimbursement Description Position Location: Chula Vista, CA Summary: Using welding/cutting equipment and various power and hand tools, the welder performs a variety of shop and shipboard welding trade functions. These functions include the repair and/or removal of old structural materials, the installation of new structural materials and complete fabrication of complex structural, mechanical and equipment foundations. Works under direct supervision and performs related work as required. Duties and Responsibilities include the following. Other duties may be assigned. • Applies basic welding processes to join, surface, fabricate, or repair parts of metal or other weldable materials., • Qualified in basic Shielded Metal Arc (SMAW) for various combinations of steel in all positions or Gas Metal Arc (GMAW) for aluminum (spray and pulsed transfer), • Works from blueprints, engineering sketches, and specification requirements to determine materials and construction process required to fabricate component parts to develop a complete unit as designed;, • May position pieces to be welded into jigs, holding fixtures, guides, and steps using measuring instruments and hand tools;, • Knowledge of the processes and procedures necessary for the proper removal of old equipment and foundations with minimal damage to surrounding materials., • Maintain certification in the welding procedure(s) as required by Quality Assurance Manager., • Fill out Objective Quality Evidence (OQE) forms, • Follow Quality Assurance welding procedures, • Performs all work in accordance with established safety procedures., • Participates in special projects as required.\n\n Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Language Ability: Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Math Ability: Requires basic math skills such as adding, subtracting, multiplying, division and fractions Reasoning Ability: Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. Computer Skills: Must possess basic computer skills to enter data into different data basis. Education/Experience: • Typically requires 1+ years related experience., • High School Diploma or GED, plus technical/vocational training or the equivalent combination., • Experience working in the marine welding/fitter trade gained through a formal apprenticeship or equivalent training is preferred., • Thorough knowledge of welding standards of SMAW, GMAW, GTAW and/or FCAW welding procedures., • Skill to make complete penetration and complete fusion welds. Equipment: • General Hand Tools, • Welding Machines, • Precision Measuring Instruments, • Pneumatic and Electric Hand Tools, • Knowledge, Skills and Other Abilities:, • Must have the ability to read and interpret blueprints, sketches, written technical instructions and manuals., • Must possess working knowledge of welding procedures and tools., • Knowledge of welding shrinkage, welding techniques and physical properties of metal., • Ability to qualify using welding procedures on plate and/or pipe., • Must be able to pass Workmanship Inspection training., • Must be able to read and understand material safety data sheets (MDS)., • Able to follow safety procedures.\n\n Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is required on a regular basis to stand, walk, sit, use hands, reach with hands and arms, climb, balance, stoop, kneel, crouch, crawl, talk and/or hear. Frequently the employee is required to carry objects that might weigh up to 50 pounds. The employee must be able to pass the vision test. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee will be working in a shipboard environment. The employee is occasionally exposed to work near moving mechanical parts or working in a confined space. The employee is regularly exposed to fumes or airborne particles. The noise level in the work environment is usually moderate. Wage Range: $21.83 - $38.00 In determining compensation, various factors will be considered, including but not limited to, educational background; relevant experience, knowledge, skills, and abilities, market factors; and geographic location. EOE Statement We are an equal employment opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status or any other characteristic protected by law. Exempt/Non-Exempt Non-Exempt Req Number WEL-26-00008 This position is currently accepting applications.

About VetPowered: VetPowered, LLC, named Veteran Owned Small Business of the Year in the United States, is a rapidly growing San Diego-based corporation specializing in manufacturing, welding, fabrication, machinery repair, and customized training under private and U.S. Government contracts. VetPowered employs a highly trained workforce utilizing advanced CNC equipment. The company is focused on strengthening and supporting advanced manufacturing in the United States. Key Job Functions: At VetPowered, the Welder Fabricator is responsible for performing welding and metal fabrication work in support of shop operations and custom projects. This role requires strong technical skills, attention to detail, and the ability to work both independently and as part of a team. Work includes building, repairing, and modifying metal components and equipment based on drawings, samples, or direction. The position supports a mission-driven organization that values precision, professionalism, and service to the veteran community. Essential Duties and Responsibilities:• Perform certified welding and fabrication work to industry standards; a current, verifiable welding certification is required (not entry-level or hobby experience) • Measure, cut, fit, form, and shape metal components safely and accurately, • Perform TIG, MIG, and Stick welding on mild steel, stainless steel, aluminum, and specialty alloys including Inconel and Monel, • Build and repair welded structures, components, and equipment from drawings, samples, or direction, • Fabricate carts, pallets, trailers, bumpers, and custom metal projects using a range of materials and structural shapes, • Operate fabrication equipment including band saws, cold saws (manual, semi-automatic, and automatic), mills, shears, hydraulic brakes, plasma cutters, and related tools, • Utilize CNC equipment such as CNC shears, CNC press brakes, tube notchers, abrasive notchers, and other metalworking machinery as required, • Support and guide others as needed to ensure work is completed safely, accurately, and on schedule, • Load and unload equipment and materials safely onto vehicles and trailers; assist with pickup and delivery of materials as needed, • Operate a forklift safely or obtain forklift certification within a reasonable timeframe, • Work effectively across multiple projects while maintaining quality and attention to detail, • Communicate clearly and professionally with team members and leadership; identify issues and provide practical solutions, • Follow all company, state, and federal safety policies and procedures • Valid driver’s license with reliable transportation to and from the worksite\n, • Current or previous MIG and TIG welding certifications; must be able to requalify or certify within two (2) weeks of hire\n, • Successful completion of an entrance welding examination in MIG, TIG, and Stick welding on mild steel, aluminum, and stainless steel, including fabrication of a test piece\n, • Strong communication skills; experience with prototype development or jig design is a plus\n, • Eligibility to obtain a DBIDS Clearance, including the ability to meet background requirements\n, • Compliance with all applicable company, state, and federal safety regulations\n, • U.S. Citizenship or Permanent Resident Status required\n\n Mission and Values: Contribute to achievement of the Mission and Vision of our organization by being: \n\n • \nAttention to Detail- The ability to accomplish a task while demonstrating a thorough concern for all the areas involved, no matter how small.\n, • \nAll In-Brings their whole self to work and giving it their all no matter how difficult the job or situation.\n, • \nAccountable- Taking personal responsibility for their work, owns mistakes, communicate honestly rather than hiding the truth, does not blame others or make excuses.\n, • \nAdaptable- Easily adjusts to changing circumstances.\n, • \nAlways Improving- A constant, ongoing effort to improve something. This 'something' can be a product, a service, one's skill set, or a team's way of working.\n\n Important Notes Position Details: This is a full-time hourly (non-exempt) position (40+ hours/week). Overtime applies based on workload and production needs. Pay: The range of pay for this California-based position is $38.00 - 43.00 per hour. Incentive Compensation: Potential for bonus or incentive compensation after one full year of employment. The actual compensation offer will carefully consider a wide range of factors including skills, qualifications, experience, and location. If your experience differs from what is listed but you believe you can add value to VetPowered, you are encouraged to apply. Schedule: This position is Monday-Friday, 7:00am-3:30pm. Occasional weekends or schedule adjustments may be required to support Company goals and production needs. Benefits and Perks: VetPowered makes available comprehensive benefits the 1st of the month, following the date of hire. Options include Medical (50% employer contribution), dental and vision coverage (100% employer contribution), a 401k program with employer match up to $1,000 per year, 8 paid holidays, and paid time off. While the Company intends to maintain these employee benefits, it reserves the absolute right to modify, amend or terminate these benefits at any time and for any reason. Dress code: Position is provided VetPowered uniforms, and laundry service. Because the dress code does vary by position and department, please consult with your hiring manager to confirm your applicable dress code at the time of hire. Supervisory: None Physical Requirements: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk or hear. The employee frequently is required to stand; sit; walk; use hands to finger, handle or feel; and reach with hands and arms. The employee is regularly required to push, move, lift or otherwise bear 10-30lbs (35-75lb W/M). Applications may include but are not limited to repetitive work using a computer keyboard, mouse and headphones while sitting and/or standing at an assigned work desk area. Work Environment: The employee works in a contract manufacturing facility in an urban industrial neighborhood. Other areas within the facility are mixed use such as administration, classrooms, welding, and machining areas.

About the Organization IMIA,LLC is the only national marine surface preparation painting contractor servicing every U.S. Port with a mobile full time workforce that ensures that a quality product is delivered on time every time. IMIA, LLC has the equipment, seasoned deckplate supervision and mechanics, as well as rigorous corporate safety and quality programs and financial strength to support our customer's preservation needs in a truly superior and comprehensive fashion. IMIA, LLC offers a comprehensive benefit package to eligible employees. Eligible employees may enroll in: • Health, • Dental, • Vision, • Life, • LTD, • Accident, • Critical Illness, • 401k Employees and their household members are also eligible to participate in the company's Employee Assistance Program. Per Diem OR Dislocation Allowance may be provided to eligible employees to reimburse some or all of the cost an employee might be reasonably expected to incur for lodging, meals, and incidental expenses while traveling out of town for work. EOE Statement IMIA, LLC is an equal opportunity employer and provides equal employment opportunities (EEO) to all employees regardless of race, color, religion, gender, gender identity or expression, national origin, sexual orientation, age, sex, disability status, marital status, status as a covered veteran, genetics, or any other protected groups under state, federal or local Equal Opportunity Laws. This policy applies to all terms and conditions of employment including but not limited to hiring, placement, promotion, termination, layoff, recall, transfer, leave of absence, compensation, and training. Description Job title: Structural Welder Reports to: Production Superintendent PAY RANGE: $25 - $35 per hour (DOE) Job Overview Responsible for welding of steel, aluminum and stainless-steel materials using the SMAW, GTAW and/or GMAW processes in all positions. Required to perform miscellaneous tasks, as assigned by his or her supervisor. Education • Ensure work is done safely and meets quality standards, • Set up welding machines based on the job at hand or using a Welding Procedure Specification, • Must have own basic skill related tools and equipment if not supplied by the workplace, • Weld steel, aluminum and stainless steel components based on the required weld processes and parameters, • Adhere to the specific welding procedure specifications, • Set up welding cells for serial production runs, • Keep work areas clean and organized and take proper care of all equipment and facilities, • Follow all company rules and policies, • Provide a great level of attention to detail and focus on the given task, • Follow all safety rules and quality standards, • Work with team members to maximize productivity and efficiency, • Assist in the preparation of product for shipment, • Report any unsafe work conditions or practice to supervisor, • Six months to one-year related experience and/or training, • Experience with steel, aluminum and/or stainless steel required, • Experience with SMAW, GTAW and GMAW welding highly preferred, • Ability to follow instructions given both verbally and in written form, • Willingness to learn and work to the best of his/her abilities and have a dependable work ethic, • Knowledge of welding equipment and associated tooling including proper set up and use, • Ability to read and interpret documents furnished in written, oral, diagram or schedule form including but not limited to safety rules, operating and maintenance instructions, quality manuals and procedure manuals, • Familiarity with the metric system, • Ability to stand continuously for long periods of time, • Willing to work 40+ hours a week, • Pass substance abuse testing, • \nReasonable Accommodations may be made to enable qualified individuals with disabilities to perform essential job functions.\n\n Location California Salary Range $25 - $35 per hour (DOE) Exempt/Non-Exempt Non-Exempt This position is currently accepting applications.

Summary You will serve as a WELDER LEADER (EXPERT) in the DEPARTMENT OF NAVY to include work sites of Portsmouth Naval Shipyard, Puget Sound Naval Shipyard, Norfolk Naval Shipyard, and Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility. This position is located in the Structural Shop (Shop 26). Applicants will only be considered for positions within their own UIC. For example: If you are within UIC 4523A, you will only be considered for positions within 4523A. Duties Help \n • You will perform reviews of documents associated with completed work and trade processes.\n, • You will keep shop personnel apprised of new technologies, procedures, and tooling improvements associated, approved, and adopted for welding work.\n, • You will provide process improvements and work with engineering to reduce cost and improve the overall efficiency of the welding and non-destructive test program.\n, • You will inspect completed and in process work for quality of workmanship and adherence to requirements, specifications, standards, plans and schedules.\n, • You will train and mentor less skilled employees, demonstrate proper work methods, and discuss viable alternatives and considerations.\n, • You will serve as an Expert Welder leading a group to ensure work assignments are completed.\n\n Requirements Help Conditions of employment \n • Must be a US Citizen.\n, • Must be determined suitable for federal employment.\n, • Must participate in the direct deposit pay program.\n, • New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit e-verify.gov\n, • Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.\n, • Males born after 12-31-59 must be registered for Selective Service.\n, • This is a bargaining unit position.\n, • You will be required to successfully complete a pre-appointment physical examination.\n, • This position requires the ability to lift and carry items weighing 50 pounds.\n, • Successful completion of a pre-employment drug test (including marijuana) is required. A tentative offer of employment will be rescinded if you fail to report to the drug test appointment or fail the test. You will be subject to random testing.\n, • You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.\n, • You will be required to wear personal protective equipment such as helmets, gloves, coveralls, glasses, goggles, respirators and safety shoes continuously for the duration of the work shift.\n, • Work is performed in areas where potentially harmful physical and chemical agents are present (e.g. fumes, dust, heat, ionizing and non-ionizing radiation and chemicals). You will be required to participate in medical surveillance programs.\n, • This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time.\n, • This position requires the ability to climb vertical ladders when working aboard ships and submarines, and occasional work from ladders, platforms and staging areas.\n, • This position may be subject to work an uncommon tour, including nights, weekends, and holidays to meet mission requirements. Overtime or night differential pay and/or unusual duty hours may be required.\n, • This position requires rotating shift work.\n, • Must hold two common welding qualifications in either SMAW, GTAW, GMAW, Flame Spray, Sub Arc, Hull Cuts, Robotic, etc.\n, • Must maintain visual inspection qualifications per VT-271.\n\n Qualifications Although a specific length of time and experience is not required for most trade and labor occupations, you must show through experience and training that you possess the quality level of knowledge and skill necessary to perform the duties of the position at the level for which you are applying. Qualification requirements emphasis is on quality of experience, not necessarily the length of time. Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the job elements and screen out listed below. This job has a screen-out element which will be used to determine minimum eligibility for this job. Applicants who do not receive a minimum of two points on the screen-out element(s) will be found ineligible. The Screen-out Element for this position is: ABILITY TO LEAD OR SUPERVISE. Applicants must meet the requirements of the Office of Personnel Management (OPM) Job Qualification Handbook for Trades and Labor Occupations. Additional qualification information can be found at: Education This job does not have an education qualification requirement. Additional information Salary is based on geographical location and is subject to change with the annual local wage surveys in accordance with the provisions of 5 CFR Part 532 for all employees whose official duty station is located within the geographic boundary of the wage area definition. For more information please visit: SALARY: Puget Sound Naval Shipyard: WA: CA: Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility: Portsmouth Naval Shipyard: ME: CA: Norfolk Naval Shipyard: VA: PA: This position is covered by the Department of Defense Priority Placement Program. Additional vacancies may be filled by this announcement. A tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointments. Temporary promotions may be extended up to 5 years at the discretion of management and in accordance with applicable regulations. Temporary actions taken under this announcement may be made permanent without further competition. Temporary actions taken under this announcement may be terminated at any time before the established not-to-exceed date. Certain incentives (such as Recruitment, Relocation or Student Loan Repayment) may be authorized to eligible selectees. Applicants rated ineligible on this vacancy announcement need to reapply and update their application package to be considered on future vacancies filled through this announcement. A relocation incentive may be authorized. A relocation incentive is generally a single payment intended to offset some of the relocation costs experienced by the selectee. Applicants selected and hired through this vacancy announcement need to reapply to be considered on future vacancies filled through this announcement. Referral lists will be issued on an as-needed basis as vacancies occur. All eligibility and qualifications must be met by the referral cut-off date. Federal annuitant information: The selection of an annuitant is subject to the Department of Defense and Department of the Navy policy on the employment of annuitants. Policy information may be found at: PPP applicants will be placed at the FPL, if determined Well Qualified (WQ). To receive priority consideration, the FPL must be the same grade level or equivalent of the retained grade or the grade held immediately prior to separation. Expand Hide additional information Candidates should be committed to improving the efficiency of the Federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution. Benefits Help A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits. Review our benefits Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.

Summary You will serve as a WELDER LEADER (EXPERT) in the DEPARTMENT OF NAVY to include work sites of Portsmouth Naval Shipyard, Puget Sound Naval Shipyard, Norfolk Naval Shipyard, and Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility. This position is located in the Structural Shop (Shop 26). Applicants will only be considered for positions within their own UIC. For example: If you are within UIC 4523A, you will only be considered for positions within 4523A. Duties Help \n • You will perform reviews of documents associated with completed work and trade processes.\n, • You will keep shop personnel apprised of new technologies, procedures, and tooling improvements associated, approved, and adopted for welding work.\n, • You will provide process improvements and work with engineering to reduce cost and improve the overall efficiency of the welding and non-destructive test program.\n, • You will inspect completed and in process work for quality of workmanship and adherence to requirements, specifications, standards, plans and schedules.\n, • You will train and mentor less skilled employees, demonstrate proper work methods, and discuss viable alternatives and considerations.\n, • You will serve as an Expert Welder leading a group to ensure work assignments are completed.\n\n Requirements Help Conditions of employment \n • Must be a US Citizen.\n, • Must be determined suitable for federal employment.\n, • Must participate in the direct deposit pay program.\n, • New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit e-verify.gov\n, • Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.\n, • Males born after 12-31-59 must be registered for Selective Service.\n, • This is a bargaining unit position.\n, • You will be required to successfully complete a pre-appointment physical examination.\n, • This position requires the ability to lift and carry items weighing 50 pounds.\n, • Successful completion of a pre-employment drug test (including marijuana) is required. A tentative offer of employment will be rescinded if you fail to report to the drug test appointment or fail the test. You will be subject to random testing.\n, • You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.\n, • You will be required to wear personal protective equipment such as helmets, gloves, coveralls, glasses, goggles, respirators and safety shoes continuously for the duration of the work shift.\n, • Work is performed in areas where potentially harmful physical and chemical agents are present (e.g. fumes, dust, heat, ionizing and non-ionizing radiation and chemicals). You will be required to participate in medical surveillance programs.\n, • This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time.\n, • This position requires the ability to climb vertical ladders when working aboard ships and submarines, and occasional work from ladders, platforms and staging areas.\n, • This position may be subject to work an uncommon tour, including nights, weekends, and holidays to meet mission requirements. Overtime or night differential pay and/or unusual duty hours may be required.\n, • This position requires rotating shift work.\n, • Must hold two common welding qualifications in either SMAW, GTAW, GMAW, Flame Spray, Sub Arc, Hull Cuts, Robotic, etc.\n, • Must maintain visual inspection qualifications per VT-271.\n\n Qualifications Although a specific length of time and experience is not required for most trade and labor occupations, you must show through experience and training that you possess the quality level of knowledge and skill necessary to perform the duties of the position at the level for which you are applying. Qualification requirements emphasis is on quality of experience, not necessarily the length of time. Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the job elements and screen out listed below. This job has a screen-out element which will be used to determine minimum eligibility for this job. Applicants who do not receive a minimum of two points on the screen-out element(s) will be found ineligible. The Screen-out Element for this position is: ABILITY TO LEAD OR SUPERVISE. Applicants must meet the requirements of the Office of Personnel Management (OPM) Job Qualification Handbook for Trades and Labor Occupations. Additional qualification information can be found at: Education This job does not have an education qualification requirement. Additional information Salary is based on geographical location and is subject to change with the annual local wage surveys in accordance with the provisions of 5 CFR Part 532 for all employees whose official duty station is located within the geographic boundary of the wage area definition. For more information please visit: SALARY: Puget Sound Naval Shipyard: WA: CA: Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility: Portsmouth Naval Shipyard: ME: CA: Norfolk Naval Shipyard: VA: PA: This position is covered by the Department of Defense Priority Placement Program. Additional vacancies may be filled by this announcement. A tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointments. Temporary promotions may be extended up to 5 years at the discretion of management and in accordance with applicable regulations. Temporary actions taken under this announcement may be made permanent without further competition. Temporary actions taken under this announcement may be terminated at any time before the established not-to-exceed date. Certain incentives (such as Recruitment, Relocation or Student Loan Repayment) may be authorized to eligible selectees. Applicants rated ineligible on this vacancy announcement need to reapply and update their application package to be considered on future vacancies filled through this announcement. A relocation incentive may be authorized. A relocation incentive is generally a single payment intended to offset some of the relocation costs experienced by the selectee. Applicants selected and hired through this vacancy announcement need to reapply to be considered on future vacancies filled through this announcement. Referral lists will be issued on an as-needed basis as vacancies occur. All eligibility and qualifications must be met by the referral cut-off date. Federal annuitant information: The selection of an annuitant is subject to the Department of Defense and Department of the Navy policy on the employment of annuitants. Policy information may be found at: PPP applicants will be placed at the FPL, if determined Well Qualified (WQ). To receive priority consideration, the FPL must be the same grade level or equivalent of the retained grade or the grade held immediately prior to separation. Expand Hide additional information Candidates should be committed to improving the efficiency of the Federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution. Benefits Help A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits. Review our benefits Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.

Job Description Company Overview: Continental Tide Defense Systems, Inc. (Continental Tide) is an industry leader, providing engineering and industrial services to the U.S. Navy, U.S. Coast Guard, Military Sealift Command, and other DoD organizations. At Continental Tide, we understand that a great company culture is one where employees know their voice is heard, no matter what their title is, and letting them grow in their role as the company does. We want to provide our employees with the opportunity to learn, be challenged and be in a position where they can succeed, develop new skills, and do things they wouldn't have the opportunity to do elsewhere. Our fast-paced and challenging environment, employees here at Continental Tide can catapult themselves to the top and we're looking for 'the best at what they do' to join our team and help us grow. *Please note due to the anticipated volume of responses, we will contact only those candidates who most closely match our requirements. Only local candidates will be considered. Veteran and retired candidates welcome! Job Overview: Continental Tide is seeking an experienced and skilled Welder. The successful candidate will join our Fleet Services Group performing various ship repair, modernization and Alteration Installation Team (AIT) projects. Essential Duties & Responsibilities: \n • Knowledgeable in joining, fabricating, and repairing metal and other weldable material by applying appropriate welding techniques.\n, • Perform various welding processes to repair, modify and install various pipes, structures, foundations and fittings associated with shipboard hydraulic, pneumatic and water systems.\n, • Fabricate and install fixtures and jigs required for welding process alignments. Interpret blueprints, specifications, diagrams or schematics to determine appropriate welding process. Must be able to select required welding filler materials, joint design, heat ranges and most effective or required welding process/procedure to ensure quality welding operations IAW TWD.\n, • Inspect completed welds to determine structural soundness and adherence to NAVSEA, ABS & AWS standards. Installs or repairs equipment, such as pipes, valves, floors and tank linings.\n, • Experienced in SMAW, GMAW & GTAW, Ship Fitting and OXY ACC & Propane GAS Cutting torch. Able to weld multiple types, thicknesses & sizes of pipe, plate & bar material in horizontal, overhead and/or vertical positions. Possess basic and some advanced specialized welder's tools.\n\n Experience and Skills Requirements: \n • Must possess a high school, trade or vocational school degree.\n, • 5-10 years of direct experience in ship repair and installation of HM&E systems and equipment.\n, • Ability to read and interpret ship installation drawings, installation specifications and NAVSEA Standard Items is preferred.\n, • Must have or have the ability to obtain a SECRET clearance.\n, • Must have the ability to obtain base access and security credentials.\n, • Ability to lift, carry and transport heavy equipment and boxes. The exact weight requirements will be determined by the specific job, but no less than 30 lbs.\n, • Ability to work on and climb ladders, work in extreme temperature environments, aboard ships, in shipyards, under industrial conditions and in confined spaces.\n, • Travel may be required within and outside of the continental United States.\n, • Due to export control regulations, this role is open to U.S. citizens only.\n\n Job Benefits Benefits: Continental Tide offers an empowering professional environment in a culture that stresses teamwork, shared responsibility for company and client success, and personal growth. We offer competitive wages in salaried and hourly positions, educational opportunities, competitive employee benefit options, and 401K plan with company match. Continental Tides Defense Systems, Inc. is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. See all of our latest opportunities at or follow us on our LinkedIn page at . To be considered you must apply by going to .

About the Organization IMIA,LLC is the only national marine surface preparation painting contractor servicing every U.S. Port with a mobile full time workforce that ensures that a quality product is delivered on time every time. IMIA, LLC has the equipment, seasoned deckplate supervision and mechanics, as well as rigorous corporate safety and quality programs and financial strength to support our customer's preservation needs in a truly superior and comprehensive fashion. IMIA, LLC offers a comprehensive benefit package to eligible employees. Eligible employees may enroll in: • Health, • Dental, • Vision, • Life, • LTD, • Accident, • Critical Illness, • 401k Employees and their household members are also eligible to participate in the company's Employee Assistance Program. Per Diem OR Dislocation Allowance may be provided to eligible employees to reimburse some or all of the cost an employee might be reasonably expected to incur for lodging, meals, and incidental expenses while traveling out of town for work. EOE Statement IMIA, LLC is an equal opportunity employer and provides equal employment opportunities (EEO) to all employees regardless of race, color, religion, gender, gender identity or expression, national origin, sexual orientation, age, sex, disability status, marital status, status as a covered veteran, genetics, or any other protected groups under state, federal or local Equal Opportunity Laws. This policy applies to all terms and conditions of employment including but not limited to hiring, placement, promotion, termination, layoff, recall, transfer, leave of absence, compensation, and training. Description Job title: Structural Welder Reports to: Production Superintendent PAY RANGE: $25 - $35 per hour (DOE) Job Overview Responsible for welding of steel, aluminum and stainless-steel materials using the SMAW, GTAW and/or GMAW processes in all positions. Required to perform miscellaneous tasks, as assigned by his or her supervisor. Education • Ensure work is done safely and meets quality standards, • Set up welding machines based on the job at hand or using a Welding Procedure Specification, • Must have own basic skill related tools and equipment if not supplied by the workplace, • Weld steel, aluminum and stainless steel components based on the required weld processes and parameters, • Adhere to the specific welding procedure specifications, • Set up welding cells for serial production runs, • Keep work areas clean and organized and take proper care of all equipment and facilities, • Follow all company rules and policies, • Provide a great level of attention to detail and focus on the given task, • Follow all safety rules and quality standards, • Work with team members to maximize productivity and efficiency, • Assist in the preparation of product for shipment, • Report any unsafe work conditions or practice to supervisor, • Six months to one-year related experience and/or training, • Experience with steel, aluminum and/or stainless steel required, • Experience with SMAW, GTAW and GMAW welding highly preferred, • Ability to follow instructions given both verbally and in written form, • Willingness to learn and work to the best of his/her abilities and have a dependable work ethic, • Knowledge of welding equipment and associated tooling including proper set up and use, • Ability to read and interpret documents furnished in written, oral, diagram or schedule form including but not limited to safety rules, operating and maintenance instructions, quality manuals and procedure manuals, • Familiarity with the metric system, • Ability to stand continuously for long periods of time, • Willing to work 40+ hours a week, • Pass substance abuse testing, • \nReasonable Accommodations may be made to enable qualified individuals with disabilities to perform essential job functions.\n\n Location California Salary Range $25 - $35 per hour (DOE) Exempt/Non-Exempt Non-Exempt This position is currently accepting applications.

Summary You will serve as a WELDER LEADER (EXPERT) in the DEPARTMENT OF NAVY to include work sites of Portsmouth Naval Shipyard, Puget Sound Naval Shipyard, Norfolk Naval Shipyard, and Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility. This position is located in the Structural Shop (Shop 26). Applicants will only be considered for positions within their own UIC. For example: If you are within UIC 4523A, you will only be considered for positions within 4523A. Duties Help \n • You will perform reviews of documents associated with completed work and trade processes.\n, • You will keep shop personnel apprised of new technologies, procedures, and tooling improvements associated, approved, and adopted for welding work.\n, • You will provide process improvements and work with engineering to reduce cost and improve the overall efficiency of the welding and non-destructive test program.\n, • You will inspect completed and in process work for quality of workmanship and adherence to requirements, specifications, standards, plans and schedules.\n, • You will train and mentor less skilled employees, demonstrate proper work methods, and discuss viable alternatives and considerations.\n, • You will serve as an Expert Welder leading a group to ensure work assignments are completed.\n\n Requirements Help Conditions of employment \n • Must be a US Citizen.\n, • Must be determined suitable for federal employment.\n, • Must participate in the direct deposit pay program.\n, • New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit e-verify.gov\n, • Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.\n, • Males born after 12-31-59 must be registered for Selective Service.\n, • This is a bargaining unit position.\n, • You will be required to successfully complete a pre-appointment physical examination.\n, • This position requires the ability to lift and carry items weighing 50 pounds.\n, • Successful completion of a pre-employment drug test (including marijuana) is required. A tentative offer of employment will be rescinded if you fail to report to the drug test appointment or fail the test. You will be subject to random testing.\n, • You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.\n, • You will be required to wear personal protective equipment such as helmets, gloves, coveralls, glasses, goggles, respirators and safety shoes continuously for the duration of the work shift.\n, • Work is performed in areas where potentially harmful physical and chemical agents are present (e.g. fumes, dust, heat, ionizing and non-ionizing radiation and chemicals). You will be required to participate in medical surveillance programs.\n, • This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time.\n, • This position requires the ability to climb vertical ladders when working aboard ships and submarines, and occasional work from ladders, platforms and staging areas.\n, • This position may be subject to work an uncommon tour, including nights, weekends, and holidays to meet mission requirements. Overtime or night differential pay and/or unusual duty hours may be required.\n, • This position requires rotating shift work.\n, • Must hold two common welding qualifications in either SMAW, GTAW, GMAW, Flame Spray, Sub Arc, Hull Cuts, Robotic, etc.\n, • Must maintain visual inspection qualifications per VT-271.\n\n Qualifications Although a specific length of time and experience is not required for most trade and labor occupations, you must show through experience and training that you possess the quality level of knowledge and skill necessary to perform the duties of the position at the level for which you are applying. Qualification requirements emphasis is on quality of experience, not necessarily the length of time. Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the job elements and screen out listed below. This job has a screen-out element which will be used to determine minimum eligibility for this job. Applicants who do not receive a minimum of two points on the screen-out element(s) will be found ineligible. The Screen-out Element for this position is: ABILITY TO LEAD OR SUPERVISE. Applicants must meet the requirements of the Office of Personnel Management (OPM) Job Qualification Handbook for Trades and Labor Occupations. Additional qualification information can be found at: Education This job does not have an education qualification requirement. Additional information Salary is based on geographical location and is subject to change with the annual local wage surveys in accordance with the provisions of 5 CFR Part 532 for all employees whose official duty station is located within the geographic boundary of the wage area definition. For more information please visit: SALARY: Puget Sound Naval Shipyard: WA: CA: Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility: Portsmouth Naval Shipyard: ME: CA: Norfolk Naval Shipyard: VA: PA: This position is covered by the Department of Defense Priority Placement Program. Additional vacancies may be filled by this announcement. A tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointments. Temporary promotions may be extended up to 5 years at the discretion of management and in accordance with applicable regulations. Temporary actions taken under this announcement may be made permanent without further competition. Temporary actions taken under this announcement may be terminated at any time before the established not-to-exceed date. Certain incentives (such as Recruitment, Relocation or Student Loan Repayment) may be authorized to eligible selectees. Applicants rated ineligible on this vacancy announcement need to reapply and update their application package to be considered on future vacancies filled through this announcement. A relocation incentive may be authorized. A relocation incentive is generally a single payment intended to offset some of the relocation costs experienced by the selectee. Applicants selected and hired through this vacancy announcement need to reapply to be considered on future vacancies filled through this announcement. Referral lists will be issued on an as-needed basis as vacancies occur. All eligibility and qualifications must be met by the referral cut-off date. Federal annuitant information: The selection of an annuitant is subject to the Department of Defense and Department of the Navy policy on the employment of annuitants. Policy information may be found at: PPP applicants will be placed at the FPL, if determined Well Qualified (WQ). To receive priority consideration, the FPL must be the same grade level or equivalent of the retained grade or the grade held immediately prior to separation. Expand Hide additional information Candidates should be committed to improving the efficiency of the Federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution. Benefits Help A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits. Review our benefits Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.

Job Description Company Overview: Continental Tide Defense Systems, Inc. (Continental Tide) is an industry leader, providing engineering and industrial services to the U.S. Navy, U.S. Coast Guard, Military Sealift Command, and other DoD organizations. At Continental Tide, we understand that a great company culture is one where employees know their voice is heard, no matter what their title is, and letting them grow in their role as the company does. We want to provide our employees with the opportunity to learn, be challenged and be in a position where they can succeed, develop new skills, and do things they wouldn't have the opportunity to do elsewhere. Our fast-paced and challenging environment, employees here at Continental Tide can catapult themselves to the top and we're looking for 'the best at what they do' to join our team and help us grow. *Please note due to the anticipated volume of responses, we will contact only those candidates who most closely match our requirements. Only local candidates will be considered. Veteran and retired candidates welcome! Job Overview: Continental Tide is seeking an experienced and skilled Welder. The successful candidate will join our Fleet Services Group performing various ship repair, modernization and Alteration Installation Team (AIT) projects. Essential Duties & Responsibilities: \n • Knowledgeable in joining, fabricating, and repairing metal and other weldable material by applying appropriate welding techniques.\n, • Perform various welding processes to repair, modify and install various pipes, structures, foundations and fittings associated with shipboard hydraulic, pneumatic and water systems.\n, • Fabricate and install fixtures and jigs required for welding process alignments. Interpret blueprints, specifications, diagrams or schematics to determine appropriate welding process. Must be able to select required welding filler materials, joint design, heat ranges and most effective or required welding process/procedure to ensure quality welding operations IAW TWD.\n, • Inspect completed welds to determine structural soundness and adherence to NAVSEA, ABS & AWS standards. Installs or repairs equipment, such as pipes, valves, floors and tank linings.\n, • Experienced in SMAW, GMAW & GTAW, Ship Fitting and OXY ACC & Propane GAS Cutting torch. Able to weld multiple types, thicknesses & sizes of pipe, plate & bar material in horizontal, overhead and/or vertical positions. Possess basic and some advanced specialized welder's tools.\n\n Experience and Skills Requirements: \n • Must possess a high school, trade or vocational school degree.\n, • 5-10 years of direct experience in ship repair and installation of HM&E systems and equipment.\n, • Ability to read and interpret ship installation drawings, installation specifications and NAVSEA Standard Items is preferred.\n, • Must have or have the ability to obtain a SECRET clearance.\n, • Must have the ability to obtain base access and security credentials.\n, • Ability to lift, carry and transport heavy equipment and boxes. The exact weight requirements will be determined by the specific job, but no less than 30 lbs.\n, • Ability to work on and climb ladders, work in extreme temperature environments, aboard ships, in shipyards, under industrial conditions and in confined spaces.\n, • Travel may be required within and outside of the continental United States.\n, • Due to export control regulations, this role is open to U.S. citizens only.\n\n Job Benefits Benefits: Continental Tide offers an empowering professional environment in a culture that stresses teamwork, shared responsibility for company and client success, and personal growth. We offer competitive wages in salaried and hourly positions, educational opportunities, competitive employee benefit options, and 401K plan with company match. Continental Tides Defense Systems, Inc. is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. See all of our latest opportunities at or follow us on our LinkedIn page at . To be considered you must apply by going to .

Job Description Company Overview: Continental Tide Defense Systems, Inc. (Continental Tide) is an industry leader, providing engineering and industrial services to the U.S. Navy, U.S. Coast Guard, Military Sealift Command, and other DoD organizations. At Continental Tide, we understand that a great company culture is one where employees know their voice is heard, no matter what their title is, and letting them grow in their role as the company does. We want to provide our employees with the opportunity to learn, be challenged and be in a position where they can succeed, develop new skills, and do things they wouldn't have the opportunity to do elsewhere. Our fast-paced and challenging environment, employees here at Continental Tide can catapult themselves to the top and we're looking for 'the best at what they do' to join our team and help us grow. *Please note due to the anticipated volume of responses, we will contact only those candidates who most closely match our requirements. Only local candidates will be considered. Veteran and retired candidates welcome! Job Overview: Continental Tide is seeking an experienced and skilled Welder. The successful candidate will join our Fleet Services Group performing various ship repair, modernization and Alteration Installation Team (AIT) projects. Essential Duties & Responsibilities: \n • Knowledgeable in joining, fabricating, and repairing metal and other weldable material by applying appropriate welding techniques.\n, • Perform various welding processes to repair, modify and install various pipes, structures, foundations and fittings associated with shipboard hydraulic, pneumatic and water systems.\n, • Fabricate and install fixtures and jigs required for welding process alignments. Interpret blueprints, specifications, diagrams or schematics to determine appropriate welding process. Must be able to select required welding filler materials, joint design, heat ranges and most effective or required welding process/procedure to ensure quality welding operations IAW TWD.\n, • Inspect completed welds to determine structural soundness and adherence to NAVSEA, ABS & AWS standards. Installs or repairs equipment, such as pipes, valves, floors and tank linings.\n, • Experienced in SMAW, GMAW & GTAW, Ship Fitting and OXY ACC & Propane GAS Cutting torch. Able to weld multiple types, thicknesses & sizes of pipe, plate & bar material in horizontal, overhead and/or vertical positions. Possess basic and some advanced specialized welder's tools.\n\n Experience and Skills Requirements: \n • Must possess a high school, trade or vocational school degree.\n, • 5-10 years of direct experience in ship repair and installation of HM&E systems and equipment.\n, • Ability to read and interpret ship installation drawings, installation specifications and NAVSEA Standard Items is preferred.\n, • Must have or have the ability to obtain a SECRET clearance.\n, • Must have the ability to obtain base access and security credentials.\n, • Ability to lift, carry and transport heavy equipment and boxes. The exact weight requirements will be determined by the specific job, but no less than 30 lbs.\n, • Ability to work on and climb ladders, work in extreme temperature environments, aboard ships, in shipyards, under industrial conditions and in confined spaces.\n, • Travel may be required within and outside of the continental United States.\n, • Due to export control regulations, this role is open to U.S. citizens only.\n\n Job Benefits Benefits: Continental Tide offers an empowering professional environment in a culture that stresses teamwork, shared responsibility for company and client success, and personal growth. We offer competitive wages in salaried and hourly positions, educational opportunities, competitive employee benefit options, and 401K plan with company match. Continental Tides Defense Systems, Inc. is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. See all of our latest opportunities at or follow us on our LinkedIn page at . To be considered you must apply by going to .

As an Experienced Structural Welder, you will report to the Production Superintendent and work on welding steel, aluminum, and stainless-steel materials using SMAW, GTAW, and/or GMAW processes.

This position is responsible for accomplishing, with minimal supervision, production welding on a ship or in a shop to support structural repairs and modernization of marine vessels including US Naval Vessels, Military Sealift Command, and commercial ships.

Labor One is hiring Journey-Level Structural Welders for a project in. Job Description: This position is responsible for accomplishing, with minimal supervision, production welding on a ship or in a shop to support structural repairs and modernization of marine vessels including US Naval Vessels, Mi

If you are a skilled and experienced structural welder looking for an opportunity to work in a dynamic shipyard environment, we encourage you to apply for the Structural Welder position at Talent Source. As a Structural Welder at Talent Source, you will play a crucial role in fabricating and welding

Job Description Labor One is hiring Journey-Level Structural Welders for a project in San Diego, California. Shipyard experience is required. Please contact our team for more information! Cell: (619)484-7267 ; (619)657-5507 or (858)717-1672 Walk-ins Accepted! Apply today! 1625 Hoover Avenue National City, CA 91950 Office Hours: 8:00 AM-5:00 PM General Information Job Description:This position is responsible for accomplishing, with minimal supervision, production welding on a ship or in a shop to support structural repairs and modernization of marine vessels including US Naval Vessels, Military Sealift Command, and commercial ships. The qualifications and general capabilities listed below are representative of the knowledge, skill, and ability desired by the shipyard. QUALIFICATIONS AND EXPERIENCE 1. Must be able to comprehend instructions, drawings, and general correspondence., 2. Must have a working knowledge of ship repair terminology and ship compartment naming convention., 3. Must be physically and medically capable to wear all required personal protective equipment (PPE) required for the job as prescribed under OSHA standards. PPE includes hard hat, safety glasses, steel toe shoes, goggles, respirator, safety harness, safety line, flotation gear, etc.), 4. Must be able to effectively confer job related information to the supervisor., 5. Must understand SMAW, FCAW, and GMAW., 6. Must be able to certify in all positions: • SMAW Full Penetration weld with permanent backing (ceramic and metal), • FCAW Full Penetration weld with permanent backing (ceramic and metal), • GMAW Full Penetration weld with permanent backing (ceramic and metal) 7. Must be able to interpret drawings, specifications, and Navy/MSC/ABS standards manuals., 8. Must possess a working knowledge of welding equipment and work processes used in marine welding., 9. Must be able to operate and care for welding equipment, portable power tools, and hand tools used to accomplish assigned work., 10. Be able to add, subtract, multiply, and divide whole numbers, fractions, and decimals., 11. Must understand the US customary and metric measurement system., 12. Must have up to four (4) years of welding experience in a related field. DUTIES AND RESPONSIBILITIES 1. Communicate with and provide direction to the welding helper and fire watch as needed to complete the assigned tasks., 2. Communicate explicitly with the Fire Watch and do not commence hot work until the area is ready in accordance with fire prevention protocol. ., 3. Arrive at the designated work site at the assigned time and end the shift as directed by the schedule and your supervisor., 4. Work shifts and overtime as assigned., 5. Be accountable for completion of daily work assignments. 6. Comply with OSHA standards and shipyards best safety practices., 6. Keep your work area clean and safe at all times, especially at the end of the shift., 7. Provide quality work and Objective Quality Evidence (OQE) as required by the work specifications or assigned by the supervisor., 8. Comply with the Company's “Non-Discrimination and Anti-Harassment Policy” which expects that all relationships among persons in the workplace will be businesslike and free of bias, prejudice, and harassment. WORK ENVIRONMENT The working environment in the shipyard varies from a normal office conditions to working outside where precipitation, wind, extreme cold, and extreme heat and high humidity are not unusual. When working inside of vessels the environment may be smoky, hot or cold, and have low levels of illumination may be present. There are heavy equipment and power tools operating almost at every location. Depending on the type of work available, reasonable accommodation may be made to enable individuals with disabilities to perform the job requirements. Personnel can expect to work in a variety of spaces from confined areas accessible only by manholes to high platforms accessible only by scaffolding or ladders. Work may also be accomplished using mechanical lifts as working platforms. The noise level in the shipyard environment is usually loud, especially inside of vessels. The noise encountered in the shop is generally low to moderate. The wearing of appropriate personal protective equipment is mandatory. There is always the potential of falling objects and personnel are occasionally exposed to moving mechanical parts during work. Appropriate PPE must always be worn. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Must be able to tour all vessels, piers, docks and work sites. While performing the duties of this job, the employee is regularly required to: stand; walk; use hands to finger, handle or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch or crawl; and talk or hear. The employee is occasionally required to sit. SPECIFIC PHYSICAL REQUIREMENTS: May be required to demonstrate any or all requirements. 1. Lift/push/pull 75 lbs lbs on an occasional basis (0-33% of the day)., 2. Lift/push/pull up to 20 lbs on a frequent basis (34-66% of the day)., 3. Perform prolonged standing (2-3 hours). Bend, squat crouch, crawl and kneel., 4. Climb in a safe manner (climbing, includes stairs, scaffolding, ladders and ramps)., 5. Work at a variety of levels and positions (ex. Waist, eye, above head)., 6. Good balance while working on uneven surfaces and maneuvering obstacles., 7. Sufficient handgrip and coordination to carry and operate tools and equipment., 8. Access work areas through 18” x 36” openings and work in confined spaces for prolonged periods of time (33-66% of the day)., 9. Respond to visual, verbal, and audible sounds/commands., 10. Work at heights above 12' from ladders, scaffolding, and manlifts., 11. Fully extend the arm while reaching overhead, reaching out, reaching to the side and reaching down., 12. Perceive attributes of an object/material such as size, shape, temperature and texture by means of receptors in the hands and fingers., 13. Turn head from side to side and about on the vertical axis. Turn body at the waist from side to side and about the vertical axis. Labor One Staffing is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other basis protected by local, state, or federal law.

Job Description Structural Welders (San Diego, CA)Lead MarineSan Diego, CA, USAFull Time$27.00 to $35.00Open to all shifts :1st Shift (6:00am-2:30pm), 2nd Shift (3:00pm-11:30pm)Lead Marine has immediate openings for Journeymen Structural Welders for the Shipyard Industry here in San Diego. This Welding job will be working on Naval Bases & Shipyards from 6:00am to 2:30pm and overtime as needed. DBIDs badge in hand is a plus. Must have 5 years of navy repair/marine welding experience. Pay is dependent on skills and capability.Qualified candidates please apply now!Responsibilities: • Multi-pass. All position fillet and butt welds using the following processes: SMAW, GMAW, and FCAW, • Heating - Oxygen/Propane Heating Torch., • Experience working in a physically demanding environment (shipboard, sub-assemblies, ladders, staging, etc.)., • Familiarity with OSHA regulations relative to the shipbuilding industry., • Air Carbon Arc Gouging., • Ability to properly use fillet and butt weld gauges, • Must be experienced with welding carbon steel and mild steel with ceramic tape backing.Requirements:, • Must comply with OSHA & NAVSEA standards, • Structural welders must have at least 5 years of structural welding experience, • Must have own hood, leathers, and hand tools., • Structural welders must be able to read and interpret welding symbols, prints, drawings, and prints., • Must be eligible to obtain DBIDs/Naval Base AccessAll Welders will be required to pass test below:, • SMAW (Shielded Metal Arc Welding) process in 2G, 3G, & 4G positions, • FCAW (Flux Core Arc Welding) process in 2G, 3G, & 4G positions, • GMAW (Gas Metal Arc Welding) process, • Air Carbon Arc Gouging proficiency testBenefits:, • Health insurance, • Paid holidays

Job Description Structural Welders (San Diego, CA)Lead MarineSan Diego, CA, USAFull Time$27.00 to $35.00Open to all shifts :1st Shift (6:00am-2:30pm), 2nd Shift (3:00pm-11:30pm)Lead Marine has immediate openings for Journeymen Structural Welders for the Shipyard Industry here in San Diego. This Welding job will be working on Naval Bases & Shipyards from 6:00am to 2:30pm and overtime as needed. DBIDs badge in hand is a plus. Must have 5 years of navy repair/marine welding experience. Pay is dependent on skills and capability.Qualified candidates please apply now!Responsibilities: • Multi-pass. All position fillet and butt welds using the following processes: SMAW, GMAW, and FCAW, • Heating - Oxygen/Propane Heating Torch., • Experience working in a physically demanding environment (shipboard, sub-assemblies, ladders, staging, etc.)., • Familiarity with OSHA regulations relative to the shipbuilding industry., • Air Carbon Arc Gouging., • Ability to properly use fillet and butt weld gauges, • Must be experienced with welding carbon steel and mild steel with ceramic tape backing.Requirements:, • Must comply with OSHA & NAVSEA standards, • Structural welders must have at least 5 years of structural welding experience, • Must have own hood, leathers, and hand tools., • Structural welders must be able to read and interpret welding symbols, prints, drawings, and prints., • Must be eligible to obtain DBIDs/Naval Base AccessAll Welders will be required to pass test below:, • SMAW (Shielded Metal Arc Welding) process in 2G, 3G, & 4G positions, • FCAW (Flux Core Arc Welding) process in 2G, 3G, & 4G positions, • GMAW (Gas Metal Arc Welding) process, • Air Carbon Arc Gouging proficiency testBenefits:, • Health insurance, • Paid holidays

Job Description Labor One is Structural Welders for Ship Repair project in San Diego, California. (4) years of welding experience is required. Please contact our team for more information! Cell: (619)484-7267 ; (619)657-5507 or (858)717-1672 Walk-ins Accepted! Apply today! 1625 Hoover Avenue National City, CA 91950 Office Hours: 8:00 AM-5:00 PM Job Description: This position is responsible for accomplishing, with minimal supervision, production welding on a ship or in a shop to support structural repairs and modernization of marine vessels including US Naval Vessels, Military Sealift Command, and commercial ships. The qualifications and general capabilities listed below are representative of the knowledge, skill, and ability desired by the shipyard. QUALIFICATIONS AND EXPERIENCE 1. Must be able to comprehend instructions, drawings, and general correspondence., 2. Must have a working knowledge of ship repair terminology and ship compartment naming convention., 3. Must be physically and medically capable to wear all required personal protective equipment (PPE) required for the job as prescribed under OSHA standards. PPE includes hard hat, safety glasses, steel toe shoes, goggles, respirator, safety harness, safety line, flotation gear, etc.), 4. Must be able to effectively confer job related information to the supervisor., 5. Must understand SMAW, FCAW, and GMAW., 6. Must be able to certify in all positions: • SMAW Full Penetration weld with permanent backing (ceramic and metal), • FCAW Full Penetration weld with permanent backing (ceramic and metal), • GMAW Full Penetration weld with permanent backing (ceramic and metal) 7. Must be able to interpret drawings, specifications, and Navy/MSC/ABS standards manuals., 8. Must possess a working knowledge of welding equipment and work processes used in marine welding., 9. Must be able to operate and care for welding equipment, portable power tools, and hand tools used to accomplish assigned work., 10. Be able to add, subtract, multiply, and divide whole numbers, fractions, and decimals., 11. Must understand the US customary and metric measurement system., 12. Must have up to four (4) years of welding experience in a related field. DUTIES AND RESPONSIBILITIES 1. Communicate with and provide direction to the welding helper and fire watch as needed to complete the assigned tasks., 2. Communicate explicitly with the Fire Watch and do not commence hot work until the area is ready in accordance with fire prevention protocol. ., 3. Arrive at the designated work site at the assigned time and end the shift as directed by the schedule and your supervisor., 4. Work shifts and overtime as assigned., 5. Be accountable for completion of daily work assignments.6. Comply with OSHA standards and the shipyards best safety practices., 6. Keep your work area clean and safe at all times, especially at the end of the shift., 7. Provide quality work and Objective Quality Evidence (OQE) as required by the work specifications or assigned by the supervisor., 8. Comply with the Company's “Non-Discrimination and Anti-Harassment Policy” which expects that all relationships among persons in the workplace will be businesslike and free of bias, prejudice, and harassment. WORK ENVIRONMENT The working environment in the shipyard varies from a normal office conditions to working outside where precipitation, wind, extreme cold, and extreme heat and high humidity are not unusual. When working inside of vessels the environment may be smoky, hot or cold, and have low levels of illumination may be present. There are heavy equipment and power tools operating almost at every location. Depending on the type of work available, reasonable accommodation may be made to enable individuals with disabilities to perform the job requirements. Personnel can expect to work in a variety of spaces from confined areas accessible only by manholes to high platforms accessible only by scaffolding or ladders. Work may also be accomplished using mechanical lifts as working platforms. The noise level in the shipyard environment is usually loud, especially inside of vessels. The noise encountered in the shop is generally low to moderate. The wearing of appropriate personal protective equipment is mandatory. There is always the potential of falling objects and personnel are occasionally exposed to moving mechanical parts during work. Appropriate PPE must always be worn. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Must be able to tour all vessels, piers, docks and work sites. While performing the duties of this job, the employee is regularly required to: stand; walk; use hands to finger, handle or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch or crawl; and talk or hear. The employee is occasionally required to sit. SPECIFIC PHYSICAL REQUIREMENTS: May be required to demonstrate any or all requirements. 1. Lift/push/pull 75 lbs lbs on an occasional basis (0-33% of the day)., 2. Lift/push/pull up to 20 lbs on a frequent basis (34-66% of the day)., 3. Perform prolonged standing (2-3 hours). Bend, squat crouch, crawl and kneel., 4. Climb in a safe manner (climbing, includes stairs, scaffolding, ladders and ramps)., 5. Work at a variety of levels and positions (ex. Waist, eye, above head)., 6. Good balance while working on uneven surfaces and maneuvering obstacles., 7. Sufficient handgrip and coordination to carry and operate tools and equipment., 8. Access work areas through 18” x 36” openings and work in confined spaces for prolonged periods of time (33-66% of the day)., 9. Respond to visual, verbal, and audible sounds/commands., 10. Work at heights above 12' from ladders, scaffolding, and manlifts., 11. Fully extend the arm while reaching overhead, reaching out, reaching to the side and reaching down., 12. Perceive attributes of an object/material such as size, shape, temperature and texture by means of receptors in the hands and fingers., 13. Turn head from side to side and about on the vertical axis. Turn body at the waist from side to side and about the vertical axis. 3rd Shift 40 hours a week/OT on approval Testing 2G/3G Flux Core (2 plates Only) Labor One Staffing is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other basis protected by local, state, or federal law.

Job Description Craft and Technical Solutions is an established Marine and Industrial Staffing Company with offices nationwide. We partner with businesses and jobseekers to place qualified individuals efficiently. Currently, CTS is reviewing resumes for Structural Welders in Sturgeon Bay, WI! Pay Rate: $30/hour and $660/week per diem Job Description: • Complete fillet and butt welds using the SMAW, GMAW, FCAW, and GMAW-P process (multi-pass) in 2G, 3G, and 4G positions., • Heat oxygen/propane heating torch., • Perform grinding and pick up work as needed., • Complete air carbon arc gouging., • Properly use fillet and butt gauges., • Minimum 8 years of naval/commercial welding experience., • Successfully pass several tests over a three-week period., • Must have reliable transportation., • Familiar with OSHA regulations relative to the shipbuilding industry., • Pass hair follicle test and background check., • Comfortable with heights and in confined spaces., • Lift 50lbs without assistance., • Must understand the layout of the ship and compartment identification., • Basic reading, writing and math skills required. CTS, LLC offers a comprehensive benefit package to eligible employees. Eligible employees may enroll in: • Health, • Dental, • Vision, • Voluntary Life/Voluntary AD&D, • Short-Term Disability, • Long-Term Disability, • Hospital Indemnity, • Accident, • Critical Illness Reasonable Accommodations may be made to enable qualified individuals with disabilities to perform essential job functions. Craft and Technical Solutions, LLC has a consistent policy that requires an online application to be completed before we can further consider you as an applicant for this position. CTS is an EOE AA M/F/Vet/Disability

Job Title: Package Assembler Job Location: San Diego, CA Shift Timings: 8:00AM - 5:00PM (Mon - Fri) Job Responsibilities: Assists with the packaging operations.Runs the packaging machines, loads items into containers.May weigh and label containers.May perform quality checks for defective items.Keeps

The Geo Group - - Responsibilities: Operate equipment and machinery for preventive, corrective, and emergency maintenance; Survey assigned jobs and ensure that sufficient and proper materials and tools are on hand; Direct and inspect the work of detainee maintenance staff, providing technical assis

Avenue5 Residential - - Responsibilities: Address apartment and property maintenance duties as specified by the maintenance supervisor and/or property manager; Maintain work order system by verifying all orders are completed in a timely manner to company standards and the resident's satisfaction; I

The Geo Group - - Responsibilities: Operate equipment and machinery for preventive, corrective, and emergency maintenance; Survey assigned jobs and ensure that sufficient and proper materials and tools are on hand; Direct and inspect the work of detainee maintenance staff, providing technical assis

Island Hospitality Management - - Responsibilities: Healthcare including Medical, Dental, and Vision Insurance; PTO and Payroll Incentives for Annual Wellness Exams; 401(k) Retirement plan - IHM Matches 100% up to 3% of your salary and an extra 50% on the next 2% of your salary; Employee Assistance

Sonepar - - Responsibilities: Perform all the duties and responsibilities of an Assembler II proficiently; Reads and deciphers schematics, blueprints, and assembly instructions; Cut, strip and crimp cables per schematics requirements; Populate panels boards with material / components per schematic

InterSolutions - - Responsibilities: Complete service tickets and work orders efficiently and accurately; Prepare vacant apartments for new residents by managing the turnover process; Keep grounds and common areas clean and free of debris; Deliver exceptional customer service to residents; Perform

Camping World - - Responsibilities: Provide and document complete diagnostic test and repair or replacement services to customers; Perform electrical, plumbing, carpentry and appliance maintenance; Track all parts and materials used in repairs or replacements; Keep supervisor appraised of work prog

Aerotek - - Responsibilities: Maintain and operate equipment such as boilers, hot water heaters, and rooftop HVAC units.Perform maintenance tasks in plumbing, carpentry, painting, cement applications, and electrical work.Monitor, adjust, and maintain the wastewater system, coordinating necessary re

LAZ Parking - - Responsibilities: Regular and punctual attendance is paramount to this position; Consult in daily preventative maintenance; Daily Maintenance of machines, painting of curbs and other misc work; Must be able to use Power tools; Report concerns or needs to direct supervisor in the cas

Aerotek - - Responsibilities: Repair, modify, install, assemble, remove, test, flush, and troubleshoot piping systems.Review technical details including specification items, drawings, manuals, and sketches; Adhere to applicable documents, references, and safety guidelines such as ABS, MIL STD, MSC

BrightView - - Responsibilities: Perform various irrigation pipefitter duties; Fit pipe of ½" through 4"; Take directions and complete tasks; Lift and carry up to 50 lbs; Work in extreme conditions near traffic and water.

InterSolutions - - Responsibilities: Complete service tickets and work orders efficiently and accurately; Prepare vacant apartments for new residents by managing the turnover process; Keep grounds and common areas clean and free of debris; Deliver exceptional customer service to residents; Perform

PrideStaff - - Responsibilities: Work collaboratively with another maintenance professional to complete tasks efficiently and to a high standard.Perform repairs, including replacing and fixing appliances.Repairing or replacing closet doors, shelving, and trim.Execute minor drywall repair and patchi

FedEx - - Responsibilities: Provide timely, quality maintenance for FedEx vehicle fleet and ground support equipment; Document work and maintain inventory using FedEx computer systems; Ensure work is in accordance with OSHA and DOT standards; Guide and support a staff of technicians and trainees; P

Enterprise - JobID: 545660 [Maintenance Mechanic] As a Maintenance Technician at Enterprise, you'll: Perform complete vehicle maintenance inspection including tires, brakes, and all fluid levels; Perform preventive maintenance (oil change, etc) service according to manufacturers specifications and g

Covenant Living Communities - - Responsibilities: Complete assigned work requests and assigned preventative maintenance work orders; Inspects facilities, systems and their components for safety and cleanliness and identifying necessary repairs; Must be able to use a variety of hand tools and small

Installer] - PT or FT / Easy Payments With Competitive Pay Rates / Flexible Scheduling / Access to Handy's Large Customer Base - As a Handy Pro Furniture Assembler you'll: Be responsible for for assembling a variety of furniture pieces in our customers' homes; Assemble a wide range of furniture item

Covenant Living Communities - - Responsibilities: Provide high quality skilled and specialized maintenance work in HVAC, refrigeration, electrical, plumbing, carpentry, and related areas; Complete maintenance assignments in apartments, common areas, offices and service areas; Complete preventative

Sunday-Thursday 8am-430pm, occasional 1pm-930pm.Vi is recognized as a Great Place to Work and one of Glassdoor's 100 Best Companies to work for.Learn from the best and accelerate your career with Vi.Generous Paid Time Off - start accruing on day one.Paid maternity and paternity benefits.Award-winnin

GreyStar - Gravity [Facilities Maintenance] As a Maintenance Technician at GreyStar, you'll: Complete assigned work orders generated from resident requests for service, as well as preventative maintenance on the property; Diagnose the source or cause of the defect or problem, and make repairs in acc