Warehouse inventory jobs in Piscataway, New JerseyCreate job alerts

Job Description Job Description Date 4/2023 Location 1300 Airport Road, North Brunswick NJ Title Associate, Manufacturing Department Standard Manufacturing Reports to Production, Supervisor FLSA (Exempt or Non-Exempt Non-Exempt Role Overview The Manufacturing Associate is responsible for the operation and set up of one (1) machine under the guidance of a seasoned operator. The position includes assisting with the setup, operation, cleaning, moving supplies and finish products and preventative maintenance of all related equipment. The Associate is accountable for overall performance including safety, quality, shrink, attainment, and production efficiency. Areas of Responsibility • Ensure full compliance with Company policies, procedures, GMP’s, Ethical Business Practice, and SOP’s at all times. Ensures documentation such as operation logs, batch records, etc. are fully completed, signed to ensure product specifications and tolerances are met in compliance with company standards and regulatory requirements., • Ensure that product meets applicable quality standards. This includes inspection for quality during operation and performing all required sampling and testing., • Complete all labeling and inventory movements to ensure accurate inventory control., • Dismantle and clean any accessories and equipment while also maintaining a clean work area., • Perform all material handling of products and components., • Correct document errors as needed on batch record., • Maintain proper gowning and hygiene to ensure integrity of the product as per company policies., • Work extended hours and occasional weekend overtime., • Works in a safe and responsible manner to create an injury-free and incident-free workplace., • Complies with all job-related safety and other training requirements. Education & Qualification: • High school graduate or GED equivalent., • No prior experience required., • Operates one (1) machine under guidance of a seasoned operator. Certifications, Licenses, Credentials: • Able to work in a team and assist others., • Able to follow written instructions precisely and perform basic math calculations as required., • Mechanically inclined to understand inner workings of equipment., • Able to lift up to 50 lbs.; occasionally lift and move up to 75 lbs., • Stand and walk on the production floor for a minimum of 6 hours per shift., • Use hands to finger, handle, feel, or operate objects or controls, lifting to waist height and/or above shoulder height, frequent bending from the waist, or squatting, walking short distances., • Occasionally works from a rolling ladder or step stool, must be to lean over equipment as well as kneeling on the floor to clean under the equipment., • Work is regularly performed inside a manufacturing environment where temperatures can be moderate, exposure to dust, odors, noise, and fumes. The noise level is usually moderate. Employees can be exposed daily to chemicals and cleaning agents. The above statements are intended to describe the general nature and level of work being performed by people assigned to this job. They are not intended to be an exhaustive list of all the job responsibilities, duties, skill, or working conditions. In addition, this document does not create an employment contract, implied or otherwise, other than an "at will" relationship. 1st shift: 7:00 AM - 3:30 PM Pay Rate: $17.00 2nd shift: 3:15 PM - 11:45 PM Pay Rate: $18.00 3rd shift: 11:00 PM - 7:30 AM Pay Rate: $19.00

Through our dedicated associates, Conduent delivers mission-critical services and solutions on behalf of Fortune 100 companies and over 500 governments - creating exceptional outcomes for our clients and the millions of people who count on them. You have an opportunity to personally thrive, make a difference and be part of a culture where individuality is noticed and valued every day. Transaction Processor-Tag Swap Clerk Onsite in Newark, NJ Hourly rate $16.50/hr, which may be below your state's minimum wage. Please take this into consideration when applying. What you get: * $16.50/hr * Great Work Environment Requirements: * Must be at least 18 years of age or older. * Must have a High School Diploma, or equivalent. * Must be able to submit to a background check * Must be able to work Monday-Friday 7:30am-4:30pm; 2 Saturday’s a Month based on company needs Summary: As a Tag Swap Processor you will be supporting our client’s tag distribution. In this role, you will be responsible for testing and programming new tags, as well as completing the process for returned tags. What you will be doing: * Maintain accurate physical tag inventory and tag inventory records. * Test and program new tags as well as complete processing of returned tags. * Accept and verify inventory shipments. Use of a pallet jack required to move and store inventory. * Duties require some bending, sitting for long periods, pushing carts with tags and lifting up to 50 LBS. * Daily pull of inventory for packing and processing of new inventory transfers to Walk-in Centers. * Test and prepare defective tag shipments for the Return Merchandise Agreement (RMA) process. * Apply appropriate postage to outgoing mail, including tags. * Support the Tag Distribution Team Lead during monthly and annual tag inventory audits. * Perform other various functions within the Department as needed. * Follow all policy and procedures and meet performance and production standards. * Intermediary Excel competency required. People who succeed in this role have: * Strong work ethic. * Effective and accurate written and verbal communication skills. * Effective problem-solving skills. * Clerical and/or warehouse experience in a fast pace environment * Microsoft Excel experience * Are excited by innovative technology Join a rapidly growing organization that can support your career goals Apply Today! Pay Transparency Laws in some locations require disclosure of compensation and/or benefits-related information. For this position, actual salaries will vary and may be above or below the range based on various factors including but not limited to location, experience, and performance. In addition to base pay, this position, based on business need, may be eligible for a bonus or incentive. In addition, Conduent provides a variety of benefits to employees including health insurance coverage, voluntary dental and vision programs, life and disability insurance, a retirement savings plan, paid holidays, and paid time off (PTO) or vacation and/or sick time. The estimated hourly rate for this role is $16.50/hr Conduent is an Equal Opportunity Employer and considers applicants for all positions without regard to race, color, creed, religion, ancestry, national origin, age, gender identity, gender expression, sex/gender, marital status, sexual orientation, physical or mental disability, medical condition, use of a guide dog or service animal, military/veteran status, citizenship status, basis of genetic information, or any other group protected by law. For US applicants: People with disabilities who need a reasonable accommodation to apply for or compete for employment with Conduent may request such accommodation(s) by submitting their request through this form that must be downloaded: ___. Complete the form and then email it as an attachment to ___. You may also ___.

Wakefern Food Corp. is the largest retailer-owned cooperative in the United States and supports its co-operative members' retail operations, trading under the ShopRite®, Price Rite®, The Fresh Grocer®, Dearborn Markets®, Fairway Market®, and Gourmet Garage® banners. Employing an innovative approach to wholesale business services, Wakefern focuses on helping the independent retailer compete in a big business world. Providing the tools entrepreneurs need to stay a step ahead of the competition, Wakefern’s co-operative members benefit from the company’s extensive portfolio of services, including innovative technology, private label development, and best-in-class procurement practices. We are seeking a seasoned SAP MM Procurement Lead with deep expertise in retail supply chain processes to lead procurement transformation initiatives. The candidate would also be Participate in design and implementation of overall Procurement solutions including Master Data, Direct and Indirect Procurement, Vendor Funding, Promotion Management (PMR), Sourcing Strategy, PO pricing, WMS and EDI integration and other related functionality Key Responsibilities • Lead SAP MM module implementation in retail environments, focusing on procurement, inventory, and supply chain processes., • Drive the conceptual work and provide recommendations around overall S/4 HANA P2P (Procure to Pay) and system architecture as well as implementation roadmap to support business requirements, • Design and configure Procure-to-Pay (P2P) processes including purchase requisitions, purchase orders, inventory management, vendor evaluation, and invoice verification., • Responsible for all Procure to Pay (P2P) configuration and integration with other downstream applications, legacy systems, warehouse management system and third party application, • Collaborate with business stakeholders to gather requirements and translate them into functional specifications and coordinate closely with the ABAP team to ensure successful completion of the enhancement., • Facilitate collaborative architecture discussions within IT, with Business and external SMEs, • Lead and mentor a team of SAP consultants and collaborate with cross-functional teams and stakeholders to ensure alignment and success., • Oversee master data management for articles, vendors, and purchasing info records., • Conduct fit-gap analysis, blueprinting, and solution design for procurement processes., • Support testing, training, and change management activities during project rollout, • Scope includes working with other SAP and non-SAP systems and support any enhancements and related integrations, • Drive end-to-end Accounts Payable process optimization, including invoice receipt, three-way matching, exception handling, and payment processing., • Collaborate with finance teams to resolve AP discrepancies, automate workflows, and improve vendor payment cycles. Experience: • 10+ years of SAP MM experience, with 3+ years in retail procurement., • Strong understanding of retail supply chain, store replenishment, and procurement cycles., • Experience with a focus on Supply Chain / Procure to Pay, WMS and EDI integration, Purchasing in Retail Industry, • Experience with SAP IS-Retail (Article Master, Site Master, Listing, Pricing), • Experience with cross-functional Integration with Sales & Distribution / Order to Cash, Inventory & Warehouse Management, and Accounts Payable processes strongly preferred, • Experience with Ariba modules (Sourcing, Buying, Contracts, Supplier Management) is a plus, • Demonstrated proficiency in leveraging AI tools to enhance business processes, automate workflows, and support data-driven decision-making., • Strong understanding of SAP Business Technology Platform (BTP), including its integration capabilities, extension suite, and data management services., • Hands-on experience integrating SAP S/4HANA with mainframe systems, ensuring seamless data exchange and process synchronization across heterogeneous environments., • Experience with BAPI, IDoc, API and FIORI apps is beneficial, • Excellent communication, stakeholder management, and problem-solving skills. Other Qualifications and Competencies: • Bachelor’s Degree in areas of Business Information, Information technology, Engineering or other alternative education in support of requirements, • Strong understanding of SAP Retail solution portfolio and product strategy, • Prior experience in MRP, Production Orders and Planned Order – nice to have

Purpose Statement: The purpose of a Procurement Analyst is to provide direct support to the procurement staff in the replenishment of ingredients and product. The Procurement Analyst will write and adjust orders, maintain inventory objectives, and serve as a communication liaison between staff and third-party warehouses. Responsibilities of this position include but are not limited to: • Analyze and summarize reports (front page, sale, warehouse, slow turn, and new item analysis); communicate findings to Management, • Utilize Microstrategy to analyze sales and categories as a means to keep Procurement Team Informed, • Execute purchasing objectives while communicating with vendors, • Manage ingredient GP% and execute any activities needed to make improvements, • Identify and implement adjustments needed to ensure sound inventory, • Assist Procurement Team in ongoing research projects Qualifications: To perform this job successfully, an individual must be able to perform each essential function satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. If requested, reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Essential Functions The core functions of this position include, but are not limited to, the following: • Utilize Microstrategy to analyze sales and categories as a means to keep Procurement Team informed, • Execute purchasing objectives while communicating with vendors, • Identify and implement order adjustments needed to ensure sound inventory, • Assist Procurement Team in ongoing research projects, • Conduct post-ad analysis for product moving out of the warehouse, • Analyze and summarize reports and communicate findings to division leadership, • Assist in creating strategies and action plans to improve purchasing functions and activities, • Contract compliance review and analysis, • Assist in developing new insights through the analysis of internal and external data sources, • Craft compelling, fact-based presentations for audiences with different levels of experience and seniority, • Complete cost analysis, bid analysis, and other financial reviews as necessary Qualifications • Bachelor’s degree in supply chain, or business related filed, • Supermarket or other retail experience (minimum of two years preferred), • Prior inventory and/or warehouse distribution experience desired, • Demonstrated ability to work under pressure and meet aggressive deadlines, • Well-developed computer skills; must be proficient in Microsoft Word, Excel, PowerPoint, Outlook and SAP, • Strong customer service and leadership skills, • Written, verbal, and interpersonal communication skills, • Experience with project planning and/or project management, • Strong attention to detail Working Conditions & Physical Demands • Ability to sit at desk for prolonged periods of time, • Ability to adhere to the company's four day in office work requirement Compensation and Benefits The salary range for this position is $59,000 to $75,000. Placement in the range depends on several factors, including experience, skills, education, geography, and budget considerations. Wakefern is proud to offer a comprehensive benefits package designed to support the health, well-being, and professional development of our Associates. Benefits include medical, dental, and vision coverage, life and disability insurance, a 401(k)-retirement plan with company match & annual company contribution, paid time off, holidays, and parental leave. Associates also enjoy access to wellness and family support programs, fitness reimbursement, educational and training opportunities through our corporate university, and a collaborative, team-oriented work environment. Many of these benefits are fully or partially funded by the company, with some subject to eligibility requirements.

Americold - JobID: 57994 [Warehouse Associate / Forklift Operator] As a Forklift Operator at Americold, you'll: Operate forklift to move and stack materials; Load and unload trucks; Maintain inventory accuracy; Follow safety procedures; Keep work area clean and organized; Assist with other warehouse

Hackensack Meridian Health - JobID: J79512147b04e4339a7015d42ae9f4392-1 [Warehouse Associate / Package Handler] As a Materials Distribution Tech at Hackensack Meridian Health, you'll: Coordinate the receipt and distribution of medical supplies; Maintain inventory records and ensure stock levels are

Job DescriptionBenefits: • 401(k) matching, • Employee discounts, • Free food & snacks, • Paid time off Key Responsibilities: • Inventory Management: Lead weekly physical inventory counts and ensure immediate and accurate data entry into the system. Investigate and resolve all stock discrepancies., • Production Fulfillment: Manage the daily process of picking, staging, and transferring ingredients to the kitchen, ensuring all movements are correctly documented in the system in real-time., • Digital Receiving: Personally oversee and execute the digital receiving of all incoming goods (perishables, ingredients, packaging) using the system-based standard operations. Be the first line of defense for quality control and discrepancy reporting., • Team Supervision: Directly manage the warehouse team, assigning daily tasks, monitoring performance, and ensuring adherence to all standard operating procedures., • Local Procurement: Take ownership of daily and weekly ordering for high-frequency items, including fresh vegetables, labels, and packaging., • Bachelors degree preferred (field of study is flexible)., • 3+ years of experience in Warehouse management in the Ready-to-Eat (RTE) food industry., • Proven experience in a warehouse or stockroom lead role, preferably within the food manufacturing or foodservice industry, • Basic knowledge of food safety standards and regulatory compliance (e.g., SQF, BRCGS)., • Proficiency with inventory management software (experience with ERP systems like Odoo is a major plus) and warehouse equipment., • Strong accuracy, team lead and active participation in problem-solving. Why Join Us? Be part of a renowned brand: Zinas has been crafting high-quality, handcrafted food since 1983 and supplies over 6,000 stores across the U.S. Stability and confidence: Join a stable, reputable company in a high-demand market, which continues market expansion. Professional Growth: Opportunities for learning, advancement, and leadership within a growing and dynamic company.

Job Description We are seeking a full time Route Delivery Driver/Warehouse Associate to join our team! You will drive to deliver and pick up goods and packages. Responsibilities: • Deliver products to customer locations in a timely manner, • Load and unload vehicle, • Collect on unpaid orders and shipments, • Inspect and monitor delivery vehicle, • Maintain accurate inventory of packages and materials, • Experience in delivery driving, customer service, or other related fields, • Clean driving record with VALID Driver License, • Ability to handle physical workload and work in field and warehouse environment, • Punctual and good time management, • Detail oriented, • Can read and write basic English Located in Houston Texas, Edison New Jersey, Rosedale Maryland and Woodridge Illinois, GBT Foods also serves as a business consultant to restaurant owners and entrepreneurs in the area and nationwide. Browse through GBTFoods.com and BossenStore.com for more information!GBT Foods, Inc., founded in 2015, is an supplier of bubble tea, frozen yogurt and snow shaved ice products. Whether you have an existing restaurant business, or just start to having an idea of opening a store, we offer a complete product line of Asian style products you will need. We sell Bossen products which provide the ingredients you need for drinks or toppings for bubble tea, shaved snow ice and frozen yogurt.\r\n\r\nLocated in Houston Texas, Edison New Jersey, Rosedale Maryland and Woodridge Illinois, GBT Foods also serves as a business consultant to restaurant owners and entrepreneurs in the area and nationwide.\r\n\r\nBrowse through GBTFoods.com and BossenStore.com for more information!

Job DescriptionBenefits/Perks • Competitive Compensation, • Paid Time Off Responsibilities • Oversee all operational aspects of the business, • Create strategic and operational goals and objectives, • Implement systems, processes, and procedures to increase efficiency and profitability, • Oversee warehouse operations and inventory control, • Ensure the organization is compliant with all applicable legal and regulatory requirements, • Examine financial data and budgets and create financial forecasts, • Set and monitor key performance indicatorsQualifications, • Bachelors degree in Business or a related field, • Previous experience as an Operations Manager is preferred, • Deep understanding of organizational effectiveness and operations management, • Ability to analyze financial data and create budgets and financial forecasts, • Excellent verbal and written communication, • Knowledge of sound business practices and financial principles

SELECCION is an SAP service company, and we are a passionate global community dedicated to redefining the future of SAP services. Our mission is to deliver impactful solutions. The future promises to be exciting—come and be a part of it. We are looking for an experienced SAP S/4HANA EWM (Extended Warehouse Management) Consultant with proven expertise in both S/4HANA Private Cloud and Public Cloud (RISE/Grow with SAP) implementations. The ideal candidate will lead or support end-to-end EWM solutions tailored for enterprise-scale digital transformations in modern SAP landscapes. Responsibilities: • Lead or support the design, configuration, and deployment of SAP EWM in both S/4HANA Private and Public Cloud environments., • Analyze and document business requirements and map them to EWM capabilities., • Manage integration between EWM and related modules such as MM, SD, TM, and third-party systems., • Collaborate with cross-functional teams to ensure seamless process alignment and system integration., • Guide clients through best practices in warehouse and logistics execution processes., • Support testing, training, cutover planning, go-live, and hyper care activities., • Provide post-implementation support, troubleshooting, and process optimization., • Ensure compliance with SAP cloud standards and adapt to regular upgrades in public cloud environments., • Someone who is open to travel 75% onsite, • Only candidates with strong implementation experience who are available for full-time positions should apply Required Skills & Experience: • 10+ years of SAP experience with at least 4+ years focused on SAP EWM in S/4HANA., • Hands-on experience in S/4HANA Public Cloud (RISE/Grow with SAP) and Private Cloud implementations., • Deep knowledge of EWM functionalities: warehouse structure, inbound/outbound, staging, RF integration, labor management, and physical inventory., • Strong understanding of SAP Activate methodology and cloud implementation best practices., • Experience integrating EWM with MM, SD, and TM., • Excellent problem-solving, client engagement, and communication skills., • Experience with global/multi-country rollouts is a plus. SELECCION CONSULTING LLC is an equal opportunity employer, providing equal employment opportunities to applicants and employees without regard to race, color, creed, religion, age, sex, sexual orientation, gender identity/expression, pregnancy, genetic information, national origin, protected veteran status, disability status, or any other legally protected basis, including arrest and conviction records, in accordance with applicable law

Our client is seeking a hands-on, results-driven General Manager / Site Leader to oversee operations at a brand-new, state-of-the-art 120,000 sq. ft. facility in Somerset, NJ, with responsibility for three additional satellite locations. This is a pivotal leadership role reporting directly to the VP of Supply Chain, and it's ideal for a dynamic leader with deep experience in warehouse operations, distribution, and team leadership. This facility supports approximately $23 million in annual revenue and specializes in warehouse and distribution operations with light assembly components. You’ll be driving operational excellence, building high-performing teams, and ensuring that orders flow efficiently through the supply chain — all while laying the foundation for scalable growth. Projects You’ll Work On • Oversee daily warehouse and distribution operations, including inbound/outbound logistics, inventory control, light assembly, and shipping., • Lead and inspire a diverse team across multiple sites to achieve high standards in safety, efficiency, and performance., • Implement process improvements to increase throughput, reduce costs, and optimize inventory handling., • Collaborate closely with senior leadership to align operational goals with overall business strategy., • Ensure compliance with quality, regulatory, and safety standards across all facilities., • Manage facility KPIs, reporting, and performance dashboards to track progress and identify areas of improvement., • Lead initiatives tied to the launch and optimization of the new 120,000 sq. ft. distribution center. What Experience You Should Bring • 7+ years of progressive leadership experience in warehouse, supply chain, logistics, or distribution environments., • Proven track record of managing large teams, driving operational KPIs, and improving process efficiency., • Experience working in mid-sized or large warehouse facilities (100k+ sq. ft. preferred)., • Strong leadership skills with the ability to manage both local and satellite site teams., • Exposure to light manufacturing or assembly operations is a plus., • Excellent communication, problem-solving, and cross-functional collaboration skills., • P&L management experience is a bonus, but not a must — we’re open to candidates ready to take on that next step. Why This Role? • Brand-new, cutting-edge facility designed for growth and efficiency., • Opportunity to build and shape a high-performing team from the ground up., • Autonomy to make an impact while working closely with executive leadership., • Stability and growth with a thriving company in the scientific and distribution space. Minimal travel is required for this position. The ideal candidate thrives in dynamic environments and loves optimizing operations with a people-first mindset.

Description This employee supports the warehouse and receiving activities of the Supply Chain Management department of the company. Essential Duties & Responsibilities • Receiving Functions – Receives and unloads materials both manually and with equipment such as pallet jacks in a timely manner. Check that proper quantity is being received by comparing the material with that on the packing list and the inventory systems. Check for damaged goods. Document and escalate receiving discrepancies to management., • Put away Functions – Move material to correct locations according to material type, lot and temperature requirements., • Storage – Ensures material in the warehouse is correctly stored. Ensures materials are either on shelves or on pallets. Ensure that only plastic pallets are used in the warehouse areas., • Picking Functions – Perform picking functions to support manufacturing campaigns., • Shipping – Prepares materials for shipment. Wraps packages, and ships miscellaneous supplies; delivers and retrieves supplies to and from work or storage areas., • Inventory Functions – Perform transactions in the inventory system to enter new quantities and, during shipping transactions, to remove inventory from stock. Support inventory cycle counts and physical counts. Education: • 2 - 5 years of experience in a warehouse environment. Computer and/or Technical Skills: • Experience with ERP, MRP, MES and inventory management systems preferred., • Operation and understanding of word processing, spreadsheets, and data management

Job Description We have 3 shifts available 1st Shift: 5:30am - 1:30pm 2nd Shift: 1:30pm - 9:30pm POSITION SUMMARY: The Manufacturing Cleaning Associate is responsible for maintaining a clean, organized, and safe manufacturing and warehouse environment. This position supports production by performing regular and deep cleaning tasks throughout the facility, including warehouse aisles, handling and organizing manufacturing tooling, and ensuring sanitation standards are met to support quality and safety requirements. Must be able to work in a dusty environment, use general hand tools, and work at heights using ladder to access ceiling light cover and other elevated areas. ESSENTIAL FUNCTIONS: Facility & Warehouse Cleaning: • Sweep, mop, and maintain cleanliness of production floors, warehouse aisles, hallways, and common areas., • Operate floor scrubber machines and other industrial cleaning equipment to maintain facility and warehouse standards., • Remove trash and recycling materials regularly and ensure proper disposal throughout the facility and warehouse. Room Sanitation & Deep Cleaning: • Perform scheduled deep cleaning of production rooms, including walls, ceilings, floors, and equipment surfaces., • Clean per company sanitation and safety protocols., • Document completed cleaning tasks and report any issues or needed repairs to supervisors. • Disassembly, cleaning and reassembly of small production equipment., • Wash production parts according to standard operating procedures (SOPs)., • Ensure parts are thoroughly cleaned, dried, and stored properly for re-use., • Maintain cleanliness of wash rooms and ensure all cleaning supplies are available and properly labeled., • Tooling Handling & Organization: Handle, clean, and organize manufacturing tooling including dies, punches, and other components., • Assist with storage, retrieval, and tracking of tooling to ensure availability and proper inventory control., • High school diploma or GED preferred., • Previous experience in sanitation or manufacturing/warehouse environment preferred., • Ability to operate industrial cleaning equipment (e.g., floor scrubbers)., • Able to lift up to 50 pounds., • Able to move pallets using a manual pallet jack., • Able to work with cleaning chemicals while following safety protocols., • Able to work in a dusty environment., • Strong attention to detail and ability to follow written and verbal instructions., • Physically capable of standing for extended periods and performing repetitive tasks., • Fast-paced, GMP-regulated manufacturing and warehouse setting., • Exposure to cleaning chemicals, dust, and noise from equipment., • Rotating tasks between general cleaning, deep sanitation, tooling handling, and warehouse upkeepCompany DescriptionReliance Vitamin is a high growth consumer products company in the very “on trend” natural and organic space, and is comprised of three divisions: · Private Labeling of premium branded and private label products for various companies/retailers using 450 stock products and differentiating with over 50 Patented and Trademarked raw materials. · Contract Manufacturing of premium powders, tablets and capsules differentiating with over 50 patented and trademarked raw materials, specializing in probiotics and plant proteins. Customer base is branded, domestic and international companies. With over 30+ years in business, Reliance provides expertise and resources to deliver nutritional innovation that truly makes a difference in consumer’s lives. The Company is in the process of transforming to maximize its entrepreneurial culture and heritage while building enterprise practices to achieve sustainable performance.Reliance Vitamin is a high growth consumer products company in the very “on trend” natural and organic space, and is comprised of three divisions:\r\n\r\n· Private Labeling of premium branded and private label products for various companies/retailers using 450 stock products and differentiating with over 50 \r\n Patented and Trademarked raw materials.\r\n\r\n· Contract Manufacturing of premium powders, tablets and capsules differentiating with over 50 patented and trademarked raw materials, specializing in probiotics \r\n and plant proteins. Customer base is branded, domestic and international companies. \r\n\r\nWith over 30+ years in business, Reliance provides expertise and resources to deliver nutritional innovation that truly makes a difference in consumer’s lives. The Company is in the process of transforming to maximize its entrepreneurial culture and heritage while building enterprise practices to achieve sustainable performance.

Job Title:Warehouse Manager Position Type: Permanent Location:Edison, NJ 08837 Salary Range / Rate: $80,000 - $140,000 Position Overview: We are seeking a hands-on Warehouse Manager to lead our daily operations. This is a critical role where you will be responsible for the entire flow of goods – from receiving to storage, and crucially, through to loading and shipping. The ideal candidate is a proactive leader with proven experience in beverage or cold chain warehousing. Key Responsibilities: • Lead Daily Operations: Manage all warehouse activities including receiving, put-away, picking, and shipping., • Run the Shipping Dock: Plan and coordinate all outbound truck schedules. Assign loads, prioritize orders, and ensure timely dispatch., • Drive Efficiency & Accuracy: Implement processes to achieve high inventory accuracy and on-time shipping goals. Find ways to do things better, faster, and safer., • Uphold Quality & Safety: Enforce strict safety, sanitation, and quality control standards, especially for temperature-sensitive products., • Lead the Team: Directly supervise, train, and motivate warehouse staff. Foster a culture of accountability and continuous improvement., • 5+ years of warehouse management experience., • Proven, hands-on experience in beverage distribution or cold chain logistics., • Direct experience with truck scheduling and dock management., • Strong understanding of key principles like FIFO and temperature control., • Excellent leadership and problem-solving skills., • Competitive salary and benefits package., • Play a key role in a growing company., • A direct impact on our supply chain success. About Us: IntelliPro was founded in 2009 and is a global leader in talent recruitment and human resources solutions. We are dedicated to providing unparalleled services to our clients, promoting employee growth, and establishing long-lasting partnerships, which sets us apart. We have active operations in the United States, China, Canada, Singapore, the Philippines, the United Kingdom, India, the Netherlands, and Germany, and continue to lead global talent solutions. IntelliPro is a global leader that connects individuals with promising job opportunities, and is committed to understanding your career aspirations. 。 As an employer that values equal employment opportunities, IntelliPro places great importance on diversity and will not discriminate based on race, color, religion, gender, sexual orientation, gender identity, ethnic background, age, genetic information, disability or any other protected group identity under the law. 。 Furthermore, our commitment to inclusiveness emphasizes the acceptance of candidates of all abilities, and ensures that our recruitment and interview processes can meet the needs of all applicants. To learn more about our commitment to diversity and inclusiveness, please visit Compensation: The salary offered to successful candidates will be determined by various factors, including education, work experience, location, job responsibilities, certifications, etc. Additionally, IntelliPro offers a comprehensive benefits package, and all benefits must meet the eligibility requirements.

About the Company: Team Beans/Forever Collectibles (FOCO) is a global leader in sports and entertainment merchandise, offering a wide range of collectibles, novelty items, and promotional memorabilia. With major sports licenses and a robust infrastructure, FOCO continues to innovate and expand. We’re seeking driven professionals to help elevate our operations—including our warehouse systems—to the next level. Primary Purpose: The WMS System Administrator plays a critical role in maintaining and optimizing the Warehouse Management System infrastructure. This position ensures seamless integration between warehouse operations and IT systems, supports inventory accuracy, and enhances operational efficiency. The role requires a technically skilled, process-oriented individual with a strong focus on system reliability, user support, and continuous improvement. Key Responsibilities: • Administer and support the WMS platform, including configuration, user access, and system updates., • Monitor system performance and troubleshoot issues related to inventory tracking, location codes, and receiving workflows., • Collaborate with warehouse leadership to ensure system alignment with operational needs., • Maintain data integrity across receiving, put-away, picking, and restocking processes., • Ensure accurate mapping and maintenance of location codes both physically and within the WMS., • Conduct regular audits and reconcile physical inventory with system data., • Develop and maintain documentation for WMS configurations, workflows, and procedures., • Train warehouse staff on WMS usage and best practices., • Coordinate with IT and distribution teams to implement system enhancements and resolve integration issues., • Support compliance with company policies and security protocols related to warehouse systems. Preferred Qualifications: • Proven experience as a WMS Administrator or similar role in warehouse/distribution environments., • Strong understanding of warehouse operations and inventory control processes., • Familiarity with WMS platforms and integration with ERP systems., • Experience with system audits, data reconciliation, and process documentation., • Excellent troubleshooting and problem-solving skills., • Strong communication and collaboration abilities across technical and operational teams., • Experience with project management tools such as Jira, Zendesk, or Asana is a plus., • Ability to lead or support cross-functional initiatives involving IT and warehouse teams. Education and Experience: • Bachelor’s Degree in Information Systems, Supply Chain, or related field., • 4+ years’ experience managing warehouse systems or supporting distribution operations., • Experience in retail or eCommerce environments is a plus. Tryouts are open at FOCO! Our team is passionate, talented, unified, and charged with creating the fan experience of tomorrow. The ball is in your court now.

About the Company: Team Beans/Forever Collectibles, LLC is a worldwide leading manufacturer of sports and entertainment merchandise, including products ranging from collectibles and novelty items to promotional memorabilia. With all of the major sports licenses at our fingertips, along with a powerful infrastructure and broad variety of products, our company is reaching new heights every day. The success of Forever Collectibles' expansion is directly related to our ability to bring fresh designs and manufacturing techniques to categories in need of innovation. We are constantly searching for dedicated and driven professionals to join and help grow our team! About the Role: The System Administrator – Financial Systems / ERP / Dynamics GP / Dynamics 365 Business Central role is responsible for driving the long term, profitable growth of FOCO’s business through supporting applications associated with Financial Systems, including Microsoft Dynamics GP and Dynamics 365 BC. This role also serves as a key liaison, trainer, and business process expert for ERP systems, supporting all aspects of Microsoft Dynamics GP, Microsoft Dynamics 365 Business Central and internal user requests. This candidate will work closely with Accounting and IT to support Dynamics GP, third party products, and inbound and outbound integrations with other software solutions. This system administer will report to the VP of Technology. Responsibilities: • Support all aspects of software or hardware related to Dynamics GP including routine maintenance, installs, updates, patches, customizations, integrations, etc. including 3rd party applications., • Communicate effectively with internal and external resources necessary to successfully complete assignments or projects., • Administer Dynamics GP End Users, roles, tasks, and all 3rd party associated applications., • Update any “How To” documentation and “Standard Operating Procedures”., • Proactively managing and prioritizing multiple GP related projects, assignments, timelines, milestones, and follow-up communications., • Conduct training for all departments for overlap support and any cross-department end-user training involving GP., • Troubleshoot and resolve daily support tickets. Qualifications: • Bachelor's degree or equivalent related work experience., • Hands-on experience with Dynamics GP (2015 or newer) supporting GP as an administrator., • Hands-on experience with Dynamics 365 BC is a PLUS., • Understanding of General Ledger, Sales Order Processing, Purchase Order Processing, Inventory, Project Accounting, Manufacturing & Bill of Materials, and Workflows., • Experience with Crystal Reports, SSRS, Management Reporter, Report Writer, Smart List Builder, SmartConnect, Integration Manager, and Modifier with VBA., • Experience with Dynamics GP Manufacturing, Warehouse Management, Web Services., • Microsoft Dynamics GP certification is preferred., • Experience with MS SQL Server 2012, Database Backup/Recovery/Maintenance, Great Plains table structure, and eConnect is preferred. We will: • Provide the opportunity to grow and develop your career., • Offer an inclusive environment that encourages diverse perspectives and ideas., • Deliver challenging and unique opportunities to contribute to the success of a transforming organization., • Offer comprehensive benefits globally. Tryouts are open at FOCO! Our team is passionate, talented, unified, and charged with creating the fan experience of tomorrow. The ball is in your court now.

Job Description**: As a Warehouse Worker at DHL, you will perform a variety of tasks essential to the smooth operation of the warehouse.Your responsibilities will include picking and packing orders, handling inventory, and maintaining a clean and organized workspace.You will need to operate various

As a Warehouse Clerk at Amazon, you will be responsible for maintaining accurate records of all inventory and ensuring that the warehouse operates smoothly. Job Title: Warehouse Clerk Employer: Amazon. You will handle administrative tasks related to the warehouse's operations, including data entry,

Napa Auto Parts - [Material Handler / Freight Handler] As a Warehouse Associate at Napa Auto Parts, you'll: Expedite incoming and outgoing freight in the warehouse; Receive, stock, pull, stage, load and ship freight; Process inventory and maximize warehouse space usage; Check, verify, load, stock an

US HIGHWAY 22E [Warehouse Associate / Freight Handler] As a RTV Clerk at Costco, you'll: Check damaged, deleted, and defective goods to Return-to-Vendor inventory in the computer; Obtain vendor return authorization for items; Process shipments to vendors.

Associates in a Warehouse Support role may perform activities related to scheduling inbound and/or outbound activities in the Distribution Center; ensure inventory accuracy within the processing areas, system and process quality as well as vendor compliance and/or outbound shipment to our stores. Sp

This includes leading staff in shipping, receiving, and inventory while ensuring compliance with quality and safety standards.

Associates in a Warehouse Support role may perform activities related to scheduling inbound and/or outbound activities in the Distribution Center; ensure inventory accuracy within the processing areas, system and process quality as well as vendor compliance and/or outbound shipment to our stores.The

Warehouse Receiving/Inventory Specialist:. NAPA Auto Parts is seeking a skilled and energetic Receiving/Inventory Specialist to join our growing team of professionals. As a Receiving/Inventory Specialist you will be tasked with breaking down shipments for distribution to other stores, stocking shelv

The Warehouse Supervisor is responsible for managing and monitoring warehouse activities including but not limited to: receiving, putaway consolidation, replenishment, picking, load checking, loading and shipping as well as inventory control while ensuring continuity, productivity, efficiency and su

A Warehouse Lead is responsible for overseeing daily warehouse operations, including shipping and receiving, inventory management, and order fulfillment. Warehouse Operations Knowledge:. Understanding of warehouse procedures, inventory management, and logistics.

Job Description COMPANY OFFERS: • Discretionary Bonus (mid-year and year-end), • Medical Benefits - Company pays 84% for Medical., • Paid Time Off, • Paid Holidays, • 401(k) Plan, • Medical Card required., • Motor Vehicle Report Required (within 3 months) RESPONSIBILITIES • Load customer orders into the truck and deliver to customers., • Inspect your delivery items from packing slip to customer for damages and or errors., • Obtain signatures for proof of receipt., • Keep company vehicles clean and neat., • Notify manager of any maintenance need of company vehicle., • Pick up customer returns (if applicable)., • Perform daily pre-trip and post-trip inspections, fuel the truck as needed, and report any problems or issues to supervisor/manager. When not on deliveries: • Receive, unload and place incoming inventory product accurately., • Accurately pick, process and ready customer orders., • Organizing stock and maintaining inventory., • Inspecting products for defects and damages., • Load and unload trucks, putting away product accurately., • Organize warehouse space as requested., • Abide by all company safety and hygiene regulations, keeping warehouse clean and organized daily., • Any other projects the supervisor / manager assigns. ADDITIONAL RESPONSIBILITIES The company conducts physical inventory counts twice a year on a Saturday, and participation is mandatory for this position. These physical inventory counts are conducted at the end of June and end of December. Employees unable to attend the physical inventory must obtain written approval from their direct supervisor in advance. REQUIREMENTS • Driver must have at least one 1 to 2 years driving a straight truck or larger., • Most of IMC’s trucks are 26' non-CDL 25900 lb. box trucks., • Team player with organizational skills and sense urgency, • Clean driving record, will be checked periodically., • Must be able to pass a medical exam with drug screen and obtain a medical card, annually., • Must be able to maintain a professional and pleasant demeanor with customers, co-workers, and vendors., • Must have physical fitness and stamina for unloading and loading trucks and working in the warehouse when not driving., • Ability to read and understand customer packing slips SKILLS • 2-3 years Road Experience, • Adherence to Safety and Driving Rules, • Good Navigation Skills, • Professional Demeanor, • Organizational Skills, • Attention to Detail, • Time Management, • Communication Skills Over the past 50 years, IMC has grown from a single facility to our current network of six facilities, located in the eastern United States. We service much of this area with our own fleet of trucks and ship nationwide. With a vast inventory of insulation and accessory products, customers can be sure that our knowledgeable sales representatives will find the correct products for each job’s unique requirements. Additionally, our fabrication facilities produce cellular glass, polyisocyanurate, phenolic foam, XPS (extruded polystyrene), and bend-a-board. Cut and roll metal jacketing, cut and curl PVC and many more products are fabricated at IMC's facilities. Excellent customer serviceInsulation Materials Corporation has provided insulation solutions since 1971. Our company distributes industrial and commercial products, including fiberglass, closed cell, calcium silicate, mineral wool, adhesives and coatings. We provide our customers with quality products from the following manufacturers listed on this page.\r\n\r\nOver the past 50 years, IMC has grown from a single facility to our current network of six facilities, located in the eastern United States. We service much of this area with our own fleet of trucks and ship nationwide.\r\n\r\nWith a vast inventory of insulation and accessory products, customers can be sure that our knowledgeable sales representatives will find the correct products for each job’s unique requirements.\r\n\r\nAdditionally, our fabrication facilities produce cellular glass, polyisocyanurate, phenolic foam, XPS (extruded polystyrene), and bend-a-board. Cut and roll metal jacketing, cut and curl PVC and many more products are fabricated at IMC's facilities. Excellent customer service

Operate Crown stand-up reach trucks to move raw materials, packaging, and finished goods.Load and unload trailers, stage materials for production and shipping, and maintain accurate inventory using RF scanners and warehouse management systems.Perform daily equipment inspections and report any mechan

We're seeking a Forklift Operator to support warehouse operations by safely moving, replenishing, and maintaining inventory. Inspect the assigned forklift and complete the vehicle inspection checklist. Previous forklift operating experience required.

Associates in a Warehouse Support role may perform activities related to scheduling inbound and/or outbound activities in the Distribution Center; ensure inventory accuracy within the processing areas, system and process quality as well as vendor com Support, Warehouse, Technology, Retail, Associate

Job Description Job Description Date 06/2025 Location 1300 Airport Road, North Brunswick NJ Title Operator, Granulation/ Blending Department Standard Manufacturing Reports to Production, Supervisor FLSA (Exempt or Non-Exempt Non-Exempt Role Overview The Granulation/Blending Operator is responsible for the operation and set up of granulators, drying oven, blenders, screening equipment etc. in accordance with company standard operating procedures. The position includes set up, operation, cleaning, and preventative maintenance of all related equipment. The Operator is accountable for overall performance including safety, quality, shrink, attainment, and production efficiency. Operators must be capable of operating multiple like machines at one time and learning to operate a variety of equipment within the manufacturing area. Areas of Responsibility • Follow batch records, SOP’s, and cGMP's guidelines to ensure product specifications and tolerances are met., • Ensures full compliance with Company policies, procedures, GMP’s, Ethical Business Practice, and SOP’s at all times. Ensures documentation such as operation logs, batch records, etc. are fully completed, signed and in compliance with company standards and regulatory requirements., • Ensures that product meets applicable quality standards. This includes inspection for quality during operation and performing all required sampling and testing., • Complete all labeling and inventory movements to ensure accurate inventory control., • Dismantle and clean any accessories and equipment while also maintaining a clean work area., • Train in the operation, cleaning and set-up of the following pieces of equipment as well as new equipment:, • Rapid Mixer Granulator: 100L & 600L and planetary mixer, • Fluid bed dryer/processor, • Tray Drying Ovens, • Fitz mill/Multi mill, • Double cone/V- blenders: 6cu. ft. to 150 cu. ft., • Screening/ sieving equipment, • Fill in appropriate logbooks for equipment and rooms., • Perform all material handling of products and components., • Correctly document all steps on batch record., • Participate in any investigation for a deviation involving a batch record., • Maintain proper gowning and hygiene to ensure integrity of the product as per company policies., • Works extended hours and occasional weekend overtime. Education & Qualification: Level 1 Pay Rate $19.00 - $22.00 • High school graduate or GED equivalent, • 3+ years Granulating/Blending Operator experience, • Minimum of one (1) year work experience in nutritionals, supplements, food, or pharmaceutical manufacturing industries, • 6-12 months experience, • Operates blending, screening & milling machines., • High school graduate or GED equivalent, • 3+ years Granulating/Blending Operator experience, • Minimum of one (1) year work experience in nutritionals, supplements, food, or pharmaceutical manufacturing industries, • 1 years of experience, • Operates 5 machines (blending, milling, sifting, tray dryer and granulation)., • A clear understanding of the principal functions of the blending /granulation department. Certified forklift operator., • High school graduate or GED equivalent, • 3+ years of experience, • Operate all machines., • Must be highly skilled in the proper set up an operation of blenders and granulators., • N/A Skills & Ability • Demonstrates ability to work in a team and assist others., • Able to follow written instructions precisely and perform basic math calculations as required., • Understands and is knowledgeable of cGMP, OSHA standards etc., • Mechanically inclined to understand the inner workings of equipment., • Ability to lift up to 50 lbs.; occasionally lift and move up to 75 pounds., • Must stand and walk on the production floor for a minimum of 6 hours per shift., • Uses hands to finger, handle, feel, or operate objects or controls, lifting to waist height and/or above shoulder height, frequent bending from the waist, or squatting, walking short distances., • Occasionally works from a rolling ladder or step stool, must be to lean over equipment as well as kneeling on the floor to clean under the equipment., • Must be able to wear all PPE including a lab coat, face mask, booties, gloves, safety glasses/goggles, and respirators. Work Environment (Office, Warehouse, temperature extremes, etc.): • Work is regularly performed inside a manufacturing environment where temperatures can be moderate, exposure to dust, odors, noise, and fumes. The noise level is usually moderate. Employees can be exposed daily to chemicals and cleaning agents. The above statements are intended to describe the general nature and level of work being performed by people assigned to this job. They are not intended to be an exhaustive list of all the job responsibilities, duties, skill, or working conditions. In addition, this document does not create an employment contract, implied or otherwise, other than an "at will" relationship. USPL is proud to be an Equal Opportunity Employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy), sexual orientation, gender identity or expression, national origin, age, genetic information, disability, protected veteran status, or any other characteristic protected by applicable local, state, or federal law. Benefits And Compensation: Our benefits are designed to help you move forward in your career, and in areas of your life outside of USPL. From health and wellness benefit options including: medical, dental, vision, short and long term disability, basic life insurance, supplemental life insurance, AD&D insurance. We also offer a matched 401(k) savings plan. Employees have the opportunity to receive compensation in the form of premium pay such as overtime, shift differential, holiday pay, sick time, etc. Newly hired employees receive up to 10 days of vacation the first year, which grows to 12 days starting the second year of employment. 3Rd shift - 11:00 pm to 7:30 am

Job Description Job Description Date 10/2025 Location 22 Van Dyke Avenue, New Brunswick NJ 08901 / 1300 Airport Road, North Brunswick NJ 08902 Title Operator, Dispensing Department Dispensing Reports to Manager, Dispensing FLSA (Exempt or Non-Exempt) Non-Exempt Role Overview The Dispensing Operator will perform all functions related to dispensing of material, receipt of goods, put-away material into warehouse aisles, pull out material per Batch card/Pick ticket, put back to same location from where it was pulled for batches, manual order processing, order auditing, shipment preparation, pallet building, transferring material from wood to plastic pallets, and cycle counting inventory. All functions may require the use of powered industrial trucks, Syspro or RF as needed. Will need to work in temperature-controlled areas. Areas of Responsibility Level 1: Dispensing Operator Overview: This is a training-level role for individuals with limited or no prior experience in pharmaceutical dispensing. Works under close supervision while learning company SOPs, GMP standards, and equipment operations. Key Responsibilities: • Assist in pulling and weighing raw materials under supervision., • Learn to read and interpret batch cards and pick slips., • Calibrate scales before use., • Cleans room after batch is complete, • Ensures safety and quality standards are consistently followed., • Maintain basic cleanliness of work area and equipment., • Support warehouse duties such as material receipt and basic inventory handling., • Follow safety procedures and learn PPE protocols., • Operate pallet jacks or assist with forklift activities (if certified). Level 2: Dispensing Operator Overview: This level is for operators with hands-on experience in pharmaceutical or supplement dispensing. Operators are responsible for completing batch-related activities with minimal supervision and maintaining documentation compliance. Key Responsibilities: • Dispense raw materials independently per batch cards., • Reviews batch card. Determine material to be used in the batch. Pull out material per requirement and enter in logbooks., • Performs requests received from other departments such as R&D, Production, QA or Purchasing etc., • Cleans room after batch is complete, • Ensures safety and quality standards are consistently followed., • Weigh materials accurately and calibrate scales before use., • Use Syspro or RF systems for inventory control., • Handle, put-away, return, and transfer of goods between warehouse locations., • Perform manual order processing, auditing, and preparation for shipments., • Maintain gowning and hygiene protocols in controlled environments., • Ensure accurate documentation in logs and batch records. Level 3: Dispensing Operator Overview: A highly experienced operator who may act as a team lead or trainer. Oversees batch dispensing activities, ensures compliance, and supports continuous improvement initiatives. Key Responsibilities: • Lead batch dispensing operations; verify materials and documentation., • Train and mentor entry and intermediate-level operators., • Collaborate with cross-functional teams (QA, R&D, Production)., • Reviews batch card. Determine material to be used in the batch. Pull out material per requirement and enter in logbooks., • Performs requests received from other departments such as R&D, Production, QA or Purchasing etc., • Cleans room after batch is complete, • Ensures safety and quality standards are consistently followed., • Conduct cycle counts and helps manage inventory accuracy., • Troubleshoot equipment or material issues; escalate when necessary., • Lead compliance audits for dispensing areas., • Support continuous improvement, safety, and 5S initiatives. Physical & Environmental Requirements (All Levels): • Able to lift 55 lbs regularly; occasionally up to 75 lbs., • Stand/walk for 6+ hours per shift., • Work in temperature-controlled rooms with PPE (lab coat, gloves, face mask, respirator, etc.). Requirements Education & Qualification: Level 1: Dispensing Operator • High school diploma or GED., • 0–1 year of experience in manufacturing or warehouse setting., • Basic math and English reading skills., • Willingness to learn cGMP, OSHA, and SOPs. Level 2: Dispensing Operator • High school diploma or GED., • 2+ years of experience in a pharmaceutical production environment., • Forklift operation experience (certification preferred)., • Familiarity with cGMP and SOP documentation standards., • Attention to detail and ability to troubleshoot basic dispensing issues. Level 3: Dispensing Operator Requirements: • High school diploma or GED; technical certification a plus., • 4+ years of dispensing experience in a GMP-regulated and within a pharmaceutical production environment, • Strong understanding of regulatory compliance (FDA, GMP, OSHA)., • Proven ability to lead teams and communicate effectively., • Proficient in inventory software (Syspro or similar ERP systems)., • Additional experience in granulation, compression, or blending is a strong plus. Certifications, Licenses, Credentials: • Demonstrates ability to work in a team and assist others., • Able to follow written instructions precisely and perform basic math calculations as required., • Understands and is knowledgeable of cGMP, OSHA standards, etc., • Mechanically inclined to understand the inner workings of the equipment., • Demonstrates the ability to read and write basic English to be able to understand the industry-regulated instruction sheets., • Ability to lift up to 55 lbs.; occasionally lift and move up to 75 pounds., • Must stand and walk on the production floor for a minimum of 6 hours per shift, • Uses hands to finger, handle, feel, or operate objects or controls, lifting to waist height and/or above shoulder height, frequent bending from the waist, or squatting, walking short distances., • Occasionally works from a rolling ladder or step stool, must be to lean over equipment as well as kneeling on the floor to clean under the equipment., • Must be able to wear all PPE including a lab coat, face mask, booties, gloves, safety glasses/goggles, and respirators. Work Environment (Office, Warehouse, temperature extremes, etc.): • Work is regularly performed inside a manufacturing environment where temperatures can be moderate, exposure to dust, odors, noise, and fumes. The noise level is usually moderate. Employees can be exposed daily to chemicals and cleaning agents. The above statements are intended to describe the general nature and level of work being performed by people assigned to this job. They are not intended to be an exhaustive list of all the job responsibilities, duties, skill, or working conditions. In addition, this document does not create an employment contract, implied or otherwise, other than an "at will" relationship. USPL is proud to be an Equal Opportunity Employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy), sexual orientation, gender identity or expression, national origin, age, genetic information, disability, protected veteran status, or any other characteristic protected by applicable local, state, or federal law. Benefits And Compensation: Our benefits are designed to help you move forward in your career, and in areas of your life outside of USPL. From health and wellness benefit options including: medical, dental, vision, short and long term disability, basic life insurance, supplemental life insurance, AD&D insurance. We also offer a matched 401(k) savings plan. Employees have the opportunity to receive compensation in the form of premium pay such as overtime, shift differential, holiday pay, sick time, etc. Newly hired employees receive up to 10 days of vacation the first year, which grows to 12 days starting the second year of employment

Job Description Job Description Date 11/2020 Location 1300 Airport Road, North Brunswick NJ Title Production Operator Department Standard Manufacturing - Beads Reports to Production Supervisor FLSA (Exempt or Non-Exempt Non-Exempt Role Overview The Beads Operator is responsible for the operation and set up of mills, granulators, drying oven, blenders, screening equipment, fluid bed dryers, feeders, etc. in accordance with company standard operating procedures. The position includes set up, operation, cleaning, and preventative maintenance of all related equipment. The Operator is accountable for overall performance including safety, quality, shrink, attainment, and production efficiency. Operators must be capable of operating multiple like machines at one time and learning to operate a variety of equipment within the manufacturing area. Areas of Responsibility • Follows batch records, SOP’s, and cGMP's guidelines to ensure product specifications and tolerances are met., • Ensures full compliance with Company policies, procedures, GMP’s, Ethical Business Practice, and SOP’s at all times. Ensures documentation such as operation logs, batch records, etc. are fully completed, signed and in compliance with company standards and regulatory requirements., • Ensures that product meets applicable quality standards. This includes inspection for quality during operation and performing all required sampling and testing., • Completes all labeling and inventory movements to ensure accurate inventory control., • Dismantles and cleans any accessories and equipment while also maintaining a clean work area., • Trains in the operation, cleaning and set-up of the following pieces of equipment as well as new equipment:, • Vector Fluid Bed Dryer, inserts, and ancillary equipment, • K-Tron powder feeder, • Air Classifying Mill, • Fitz mill/Multi mill, • Double cone/V- blenders: 6cu. ft. to 150 cu. ft., • Screens/ sieves equipment, • Fills in appropriate logbooks for equipment and rooms., • Performs all material handling of products and components., • Correctly document all steps on batch record., • Participates in any investigation for a deviation involving a batch record., • Maintains proper gowning and hygiene to ensure integrity of the product as per company policies., • Works extended hours and occasional weekend overtime., • Works in a safe and responsible manner to create an injury-free and incident-free workplace., • Complies with all job-related safety and other training requirements. Education & Qualification: • High school graduate or GED equivalent, • Demonstrates ability to work in a team and assist others., • Able to follow written instructions precisely and perform basic math calculations as required., • Understands and is knowledgeable of cGMP, OSHA standards, etc., • Mechanically inclined to understand the inner workings of the equipment. Level 1 Pay Rate: $19.00 - $23.00 • 1-2 years experience, • Operates fluid bed dryer, blending, screening & milling machines. Pay Rate: $22.00 - $24.00 • 2-4 years’ experience plus responsibilities above, • Operates, cleans, sets all machines in work area., • A clear understanding of the principal functions of the bead department., • Completes batch card independently, follow SOP’s and GMP’s strictly Pay Rate: $24.00 - $27.00 • 5+ Years’ experience plus responsibilities above, • Operates, cleans, sets all machines in work area., • Must be highly skilled in the proper set up an operation of blenders and granulators., • Applies cGMP’s & completes batch card instructions accurately - able to train all activities in bead manufacturing department., • Ability to work with minimum to no supervision, • Ability to lift up to 50 lbs.; occasionally lift and move up to 75 pounds., • Must stand and walk on the production floor for a minimum of 6 hours per shift, • Uses hands to finger, handle, feel, or operate objects or controls, lifting to waist height and/or above shoulder height, frequent bending from the waist, or squatting, walking short distances., • Occasionally works from a rolling ladder or step stool, must be to lean over equipment as well as kneeling on the floor to clean under the equipment., • Work is regularly performed inside a manufacturing environment where temperatures can be moderate, exposure to dust, odors, noise, and fumes. The noise level is usually moderate. Employees can be exposed daily to chemicals and cleaning agents. The above statements are intended to describe the general nature and level of work being performed by people assigned to this job. They are not intended to be an exhaustive list of all the job responsibilities, duties, skill, or working conditions. In addition, this document does not create an employment contract, implied or otherwise, other than an "at will" relationship. USPL is proud to be an Equal Opportunity Employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy), sexual orientation, gender identity or expression, national origin, age, genetic information, disability, protected veteran status, or any other characteristic protected by applicable local, state, or federal law. Benefits And Compensation: Our benefits are designed to help you move forward in your career, and in areas of your life outside of USPL. From health and wellness benefit options including: medical, dental, vision, short and long term disability, basic life insurance, supplemental life insurance, AD&D insurance. We also offer a matched 401(k) savings plan. Employees have the opportunity to receive compensation in the form of premium pay such as overtime, shift differential, holiday pay, sick time, etc. Newly hired employees receive up to 10 days of vacation the first year, which grows to 12 days starting the second year of employment. 1st shift: 7:00 AM - 3:30 PM 2nd shift: 3:15 PM - 11:45 PM 3rd shift: 11:00 PM - 7:30 AM

Job Description Job Description Date 09/25 Location 1300 Airport Road, North Brunswick NJ Title Mechanic, Building Maintenance Department Facilities / Engineering Reports to Manager, Maintenance FLSA (Exempt or Non-Exempt) Non -Exempt Role Overview The Building Maintenance Mechanic is responsible for the upkeep, repair, and maintenance of building systems, structures and utilities supporting operations in the facility. . This includes HVAC, plumbing, electrical systems, carpentry, painting, and general facility maintenance along with supporting equipment/utilities such as Air compressors, boilers, dust collectors etc.. The role ensures a safe, functional, and compliant environment for building occupants, adhering to Good Manufacturing Practices (cGMPs) and other industry standards. Areas of Responsibility Level 1 – Mechanic, Building Maintenance Employee will assist in the upkeep and repair of building systems under close supervision. This role is ideal for individuals beginning their career in facilities maintenance within a regulated manufacturing and warehouse environment.. Employees at this level operate under close supervision. They apply foundational mechanical and electrical knowledge to assist in setup and repairs. Independent judgment is limited; more complex tasks are escalated to higher levels. Key Responsibilities: • Assist in routine inspections and basic maintenance tasks on HVAC, plumbing, and structural systems. under supervision., • Perform minor repairs on building systems (e.g., replace light bulbs, unclog drains)., • Assist in preventive maintenance activities., • Maintain cleanliness and organization of work areas., • Report issues and escalate complex problems to senior staff. Level 2 – Mechanic, Building Maintenance Employee will independently manage routine and moderate maintenance tasks, ensuring the functionality and compliance of building systems. This role is suitable for individuals with a solid foundation in facilities maintenance and a proactive approach to problem-solving. Employees at this level work with moderate supervision, frequently exercising independent judgment. They apply skills to set up, repair, and maintain facility/building and associated utilities. They are expected to analyze problems, propose solutions, and take ownership of more complex tasks. Key Responsibilities: • Conduct inspections and perform preventive maintenance on HVAC, plumbing, electrical, and structural systems., • Diagnose and repair minor to moderate issues in building systems., • Coordinate with vendors for specialized repairs and services., • Maintain accurate records of maintenance activities and inventory., • Assist in training and mentoring Level 1 technicians. Level 3 – Mechanic, Building Maintenance Employees will oversee complex maintenance projects, lead preventive maintenance initiatives, and ensure compliance with all safety and regulatory standards. This role is designed for individuals with extensive experience and leadership capabilities in facilities maintenance Employee will operates independently with full responsibility for maintenance operations, making strategic decisions to improve facility performance. Key Responsibilities: • Lead and oversee complex maintenance projects and repairs., • Develop and implement preventive maintenance schedules., • Ensure compliance with all safety and regulatory standards., • Manage relationships with contractors and service providers., • Prepare and manage maintenance budgets and reports., • Supervise and mentor Level 1 and Level 2 technicians. Requirements Education & Qualification: Level 1 – Mechanic, Building Maintenance • High school diploma or GED equivalent., • Basic knowledge of building systems., • Ability to use hand tools and power equipment safely., • Strong attention to detail and willingness to learn., • High school diploma or GED equivalent; vocational training or certification in building maintenance preferred., • 3–5 years of experience in building maintenance or a related field., • Proficiency in using diagnostic tools and equipment., • Strong problem-solving skills and ability to work independently., • High school diploma or GED equivalent; advanced certifications or associate degree in building maintenance or facilities management preferred., • 5+ years of experience in building maintenance, with at least 2 years in a supervisory role., • In-depth knowledge of building systems and maintenance procedures., • Strong leadership, organizational, and communication skills., • Ability to manage multiple projects simultaneously., • License or certifications in electronics, pneumatics and/or hydraulics preferred., • HVAC, Electrical, Plumbing, Painting, pneumatic, boilers, compressed air systems, pumps, hydraulic and Mechanical systems as required. PLC is a plus., • General PC proficiency and work order systems etc., • Skill in handling several projects or tasks at the same time, or within a given time frame., • The ability to recognize a safety issue or potential safety issue., • Skill in quality and compliance vigilance., • Ability to maintain a professional, positive attitude at all times., • Ability to communicate with coworkers, management team members, and other individuals in a courteous and professional manner., • Demonstrates ability to work in a team and assist others., • Able to follow written instructions precisely and perform basic math calculations as required., • Understands and is knowledgeable of cGMP, OSHA standards, etc., • Demonstrates the ability to read and write basic English to be able to understand the industry-regulated instruction sheets., • Demonstrates forklift experience with both sit-down and stand-up trucks., • Demonstrates the ability to read and write basic English to be able to understand the industry regulated instruction sheets., • Mechanically inclined to understand inner workings of equipment., • Ability to lift up to 50 lbs.; occasionally lift and move up to 75 pounds., • Must stand and walk on the production floor for a minimum of 6 hours per shift., • Uses hands to finger, handle, feel, or operate objects or controls, lifting to waist height and/or above shoulder height, frequent bending from the waist, or squatting, walking short distances., • Occasionally works from a rolling ladder or step stool, must be to lean over equipment as well as kneel on the floor to clean under the equipment., • Work is regularly performed inside a manufacturing environment where temperatures can be moderate, exposure to dust, odors, noise, and fumes. The noise level is usually moderate. Employee can be exposed daily to chemicals and cleaning agents. May occasionally work on the outside of the building, on the grounds, in parking areas, or on the roof during all seasons. The above statements are intended to describe the general nature and level of work being performed by people assigned to this job. They are not intended to be an exhaustive list of all the job responsibilities, duties, skill, or working conditions. In addition, this document does not create an employment contract, implied or otherwise, other than an "at will" relationship. USPL is proud to be an Equal Opportunity Employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy), sexual orientation, gender identity or expression, national origin, age, genetic information, disability, protected veteran status, or any other characteristic protected by applicable local, state, or federal law. Benefits And Compensation: Our benefits are designed to help you move forward in your career, and in areas of your life outside of USPL. From health and wellness benefit options including: medical, dental, vision, short and long term disability, basic life insurance, supplemental life insurance, AD&D insurance. We also offer a matched 401(k) savings plan. Employees have the opportunity to receive compensation in the form of premium pay such as overtime, shift differential, holiday pay, sick time, etc. Newly hired employees receive up to 10 days of vacation the first year, which grows to 12 days starting the second year of employment. 1st shift 7:00am to 3:30pm

Your role will require you to retrieve and place pallets at various heights, perform daily equipment inspections, and follow warehouse safety protocols. Accurately scan, label, and record inventory movements using warehouse management systems (WMS). Collaborate with warehouse staff and supervisors t

Warehouse Operations associates support the operational integrity, safety, and efficiency of the Distribution Center (DC).Responsibilities may include maintaining and repairing equipment, auditing asset protection processes, coordinating transportation logistics, managing inventory accuracy, support

Job Description Job Description Date 10/2025 Location 1300 Airport Road, North Brunswick NJ Title Maintenance Mechanic - MFG Department Facilities / Engineering Reports to Manager, Maintenance FLSA (Exempt or Non-Exempt) Non -Exempt Role Overview The Maintenance Mechanic is responsible for maintenance, repair and troubleshooting, Processing equipment such as conveyors, blowers, sifters, burners, grinders, conventional & high-speed encapsulation equipment, vacuum & hydraulic pumps, air compressors, fluid bed dryers, coating machines, granulators, tablet compression machines, etc. Areas of Responsibility Level 1 – Mechanic, Maintenance (MFG) Mechanic supports routine maintenance, equipment cleaning, basic troubleshooting, and minor repairs under supervision. Ideal for those newer to manufacturing maintenance, this role focuses on learning and executing tasks safely and accurately. Employees at this level operate under close supervision. They apply foundational mechanical and electrical knowledge to assist in setup, repair, troubleshooting, and maintenance of manufacturing equipment. Independent judgment is limited; more complex tasks are escalated to higher levels. Key Responsibilities: • Perform disassembly, cleaning, and setup of basic production equipment., • Assist senior technicians in scheduled maintenance tasks., • Replace small parts (belts, hoses, filters) with direction., • Learn and follow cGMP and safety procedures., • Complete daily logs, maintenance checklists, and safety forms., • Participate in basic troubleshooting with guidance., • Respond to facility and equipment issues under supervision., • Operate forklifts and lifts (certification preferred). Level 2 – Mechanic, Maintenance (MFG) Mechanic requires the ability to independently perform equipment maintenance, moderate troubleshooting, and lead to smaller repairs. Employees at this level work with moderate supervision, frequently exercising independent judgment. They apply solid mechanical and electrical skills to set up, repair, troubleshoot, and maintain equipment. They are expected to analyze problems, propose solutions, and take ownership of more complex tasks. Key Responsibilities: • Conduct intermediate-level repairs on packaging and processing equipment., • Troubleshoot mechanical, pneumatic, and electrical systems., • Use diagnostic tools (calipers, micrometers, multimeters, etc.)., • Coordinate with vendors to address equipment issues., • Maintain spare parts inventory and request supplies., • Operate and maintain boilers, HVAC, pumps, and compressors., • Record maintenance activities accurately in logbooks and systems., • Train and mentor Level 1 Technicians., • Support emergency calls and on-call rotations. Level 3 – Mechanic, Maintenance (MFG) Mechanic are highly skilled professionals who lead complex repairs, system diagnostics, and project-based maintenance work. They serve as subject matter experts and may act as a shift lead. Employees operate with minimal to no supervision. They are trusted to independently plan, diagnose, repair, and maintain complex manufacturing equipment. They make high‑level judgments, lead projects, and serve as technical experts and advisors. Employees work closely with the engineering team to identify mechiancal issues, processing issues and propose process improvement measures mechiancally to improve productivity and effeciency of equipment. Have a deep understanding of the process and equipment being used. Key Responsibilities: • Lead troubleshooting and repairs of high-speed and complex machinery (e.g., encapsulators, fluid bed dryers, tablet presses)., • Diagnose and resolve advanced mechanical/electrical problems., • Manage and execute preventative maintenance programs., • Read and interpret advanced schematics, blueprints, and manuals., • Serve as a technical liaison between departments and vendors., • Lead regulatory inspections (OSHA, EPA, etc.) support and documentation., • Mentor and train Levels 1 and 2 staff., • Plan and coordinate plant shutdowns and major repirs. Education & Qualification: Level 1 – Mechanic, Maintenance (MFG) • High School diploma or GED required., • 0–2 years in maintenance experience in a manufacturing environment, • Basic mechanical aptitude and tool familiarity., • Ability to follow written SOPs and safety protocols., • Willingness to work flexible shifts and overtime., • High school graduate or GED equivalent, Technical or vocational training is a plus., • 3+ years of hands-on maintenance experience in manufacturing., • Strong understanding of safety, compliance, and regulatory standards., • Knowledge of cGMP, OSHA, and equipment schematics., • Must have a high school diploma or GED equivalent, • Associate degree, technical certification, or vocational training is a plus, • 5+ Years work experience in a regulated industry such as Nutritional’s, vitamins, food manufacturing or pharmaceutical equipment maintenance is preferred., • Advanced understanding of mechanical, pneumatic, and electrical systems., • PLC troubleshooting experience preferred., • Strong leadership and communication skills., • Ability to work independently with little to no supervision., • License or certifications in electronics, pneumatics and/or hydraulics preferred., • HVAC, Electrical, Plumbing, Painting, pneumatic, boilers, compressed air systems, pumps, hydraulic and Mechanical systems as required. PLC is a plus., • General PC proficiency and work order systems etc., • Skill in handling several projects or tasks at the same time, or within a given time frame., • The ability to recognize a safety issue or potential safety issue., • Skill in quality and compliance vigilance., • Ability to maintain a professional, positive attitude at all times., • Ability to communicate with coworkers, management team members, and other individuals in a courteous and professional manner., • Demonstrates ability to work in a team and assist others., • Able to follow written instructions precisely and perform basic math calculations as required., • Understands and is knowledgeable of cGMP, OSHA standards, etc., • Demonstrates the ability to read and write basic English to be able to understand the industry-regulated instruction sheets., • Demonstrates forklift experience with both sit-down and stand-up trucks., • Demonstrates the ability to read and write basic English to be able to understand the industry regulated instruction sheets., • Mechanically inclined to understand inner workings of equipment., • Ability to lift up to 50 lbs.; occasionally lift and move up to 75 pounds., • Must stand and walk on the production floor for a minimum of 6 hours per shift., • Uses hands to finger, handle, feel, or operate objects or controls, lifting to waist height and/or above shoulder height, frequent bending from the waist, or squatting, walking short distances., • Occasionally works from a rolling ladder or step stool, must be to lean over equipment as well as kneel on the floor to clean under the equipment. USPL is proud to be an Equal Opportunity Employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy), sexual orientation, gender identity or expression, national origin, age, genetic information, disability, protected veteran status, or any other characteristic protected by applicable local, state, or federal law. Benefits And Compensation: Our benefits are designed to help you move forward in your career, and in areas of your life outside of USPL. From health and wellness benefit options including: medical, dental, vision, short and long term disability, basic life insurance, supplemental life insurance, AD&D insurance. We also offer a matched 401(k) savings plan. Employees have the opportunity to receive compensation in the form of premium pay such as overtime, shift differential, holiday pay, sick time, etc. Newly hired employees receive up to 10 days of vacation the first year, which grows to 12 days starting the second year of employment. 2 nd shift - 3:00 pm to 11:30 pm

Job Description About us! Paragon Staffing, LLC takes the stress and trouble away from finding each individual the right employment opportunity! Apply Today! Job description Shipping & Receiving/ Forklift Operator SUMMARY OF POSITION To keep accurate records to all materials received and inventoried. Inspect shipments, and reconcile packing slips or manifests with actual items, and verify that materials are delivered to correct departments or properly stored in warehouse. ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned.  Review all incoming items, inspecting them for quality, and ensuring proper paperwork is received.  Enter all raw materials into MAS 500 system, verify entry, and post transactions.  Locate and consolidate received materials to a bin location in the warehouse.  Work closely with other departments to ensure a steady flow of materials needed to meet customer demand.  Move materials, supplies, and finished goods to designated places in the facility, using hand trucks, forklifts, etc.  Use of a handheld scanner to track and locate all materials.  Maintains thorough knowledge of assigned processes and equipment.  Reports any process and equipment problems to the attention of upper management and/or the Maintenance Supervisor.  Responsible for all processes, equipment, employees, safety, and housekeeping of the area and meeting quality and quantity standards.  Recommends measures to improve production methods, equipment performance, and quality of product.  Recognize non-confirming goods and to inform Quality Assurance Manager.  Effective utilization of required systems, including HQMS, Sage 500 ERP/DSCS, and handheld scanners.  Ensures established safety protocol is followed. QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. JOB REQUIREMENTS  The ability to maintain computerized inventory system promptly and accurately.  Ability to work effectively with all levels of employees and management. Have a good command of the English language.  Experience operating powered industrial trucks, including forklifts, Order Pickers, Walkies, Trans-Stackers, and Clamp Trucks. Certification is desirable.  Ability to read and interpret work orders for processing.  Ability to use simple math and basic hand help measuring tools.  Strong organizational and planning skills.  High school diploma or equivalency degree. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, light to moderate physical effort is required. Ability to lift or maneuver materials in excess of 45+lbs. Regularly required to stand, reach and move about the facility. WORK ENVIRONMENT This is a fast-paced work environment with consistent pressure to complete duties as outlined above which requires ability to manage multiple projects at a detailed level and provide support to many internal departments in a fast-changing environment. Many duties listed above are time-sensitive and have strict deadlines for completion. Work performed in a Warehouse Manufacturing/Distribution Plant environment. Exposed to any number of elements but with none present to the extent of being disagreeable. Job Type: Full-time Salary: - $20.00 per hour Schedule- First Shift Location : North Brunswick, NJ Language: • English (Required) Work Location: In person Powered by JazzHR B7D5KGWA7a

Job DescriptionDo you love helping people through difficult situations? Then dont miss your chance to join our Franchise as a new Restoration Technician. In this position, you will be making a difference each and every day. We have a sincere drive toward the goal of helping make fire and water damage Like it never even happened! Our Franchise is seeking someone who is comfortable working hard in challenging situations, enjoys meeting new people, has excellent communication skills, enjoys supervising others, and is a serious multi-tasker. If you are self-motivated and have superb interpersonal skills, then youll thrive in this work environment. Are you highly dependable and super-excited about routinely exceeding expectations? Then you may be our perfect hero! As a valued SERVPRO Franchise employee, you will receive a competitive pay rate, with opportunity to learn and grow. Job Description: Respond to service calls as needed. Perform services as assigned, following SERVPRO production guidelines. Communicate with the crew chief to make sure all customer needs are met. Support crew chief and other production personnel, as needed. Clean and maintain vehicles, equipment, warehouse, and office areas, as needed. Responsibilities: • Inventory and load the work vehicle with equipment, products, and supplies needed for each project, • Maintain a clean and organized vehicle and clean equipment appearance, • Prepare rooms/areas for work activities, • Set up staging area and equipment for each project, • Leave job site with a clean and orderly appearance, • Perform production processes following SERVPRO production guidelines per work order per crew chief directions, • Ensure clear two-way communication with crew chief and other technicians (especially regarding customer needs and concerns), • Perform end-of-day/end-of-job cleanup and breakdown to leave job site with a clean and orderly appearance, • Understand and follow safety and risk management guidelines on the job site, in the office, and while travelingQualifications:, • Effective oral communication, • Experience in cleaning/restoration preferred, • High school diploma/GED, • IICRC certifications preferred, • Ability to travel locally and out of state as necessary, • Ability to successfully complete a background check subject to applicable lawPhysical and Work Environment Requirements:, • Ability to regularly lift 50 pounds and ability to lift up to 100 pounds with assistance, • Exposure to chemicals, • Walking and standing for long periods of time, driving, sitting, climbing,, • Ability to climb ladders and work at ceiling heights, • Ability to work in tight spaces (e.g., crawls spaces under buildings) All employees of a SERVPRO Franchise are hired by, employed by, and under the sole supervision and control of an independently owned and operated SERVPRO Franchise. SERVPRO Franchise employees are not employed by, jointly employed by, agents of, or under the supervision or control of Servpro Industries, Inc., the Franchisor, in any manner whatsoever.

Job Description Job Description Role Overview The Granulation/Blending Operator is responsible for the operation and set up of granulators, drying oven, blenders, screening equipment etc. in accordance with company standard operating procedures. The position includes set up, operation, cleaning, and preventative maintenance of all related equipment. The Operator is accountable for overall performance including safety, quality, shrink, attainment, and production efficiency. Operators must be capable of operating multiple like machines at one time and learning to operate a variety of equipment within the manufacturing area. Areas of Responsibility • Follow batch records, SOP’s, and cGMP's guidelines to ensure product specifications and tolerances are met., • Ensures full compliance with Company policies, procedures, GMP’s, Ethical Business Practice, and SOP’s at all times. Ensures documentation such as operation logs, batch records, etc. are fully completed, signed and in compliance with company standards and regulatory requirements., • Ensures that product meets applicable quality standards. This includes inspection for quality during operation and performing all required sampling and testing., • Complete all labeling and inventory movements to ensure accurate inventory control., • Dismantle and clean any accessories and equipment while also maintaining a clean work area., • Train in the operation, cleaning and set-up of the following pieces of equipment as well as new equipment:, • Rapid Mixer Granulator: 100L & 600L and planetary mixer, • Fluid bed dryer/processor, • Tray Drying Ovens, • Fitz mill/Multi mill, • Double cone/V- blenders: 6cu. ft. to 150 cu. ft., • Screening/ sieving equipment, • Fill in appropriate logbooks for equipment and rooms., • Perform all material handling of products and components., • Correctly document all steps on batch record., • Participate in any investigation for a deviation involving a batch record., • Maintain proper gowning and hygiene to ensure integrity of the product as per company policies., • Works extended hours and occasional weekend overtime. Education & Qualification: • High school graduate or GED equivalent, • 3+ years Granulating/Blending Operator experience, • Minimum of one (1) year work experience in nutritionals, supplements, food, or pharmaceutical manufacturing industries, • 6-12 months experience, • Operates blending, screening & milling machines., • Must be proficient in proper setup and operation of blenders. Certifications, Licenses, Credentials: • N/A Skills & Ability • Demonstrates ability to work in a team and assist others., • Able to follow written instructions precisely and perform basic math calculations as required., • Understands and is knowledgeable of cGMP, OSHA standards etc., • Mechanically inclined to understand the inner workings of equipment., • Demonstrates the ability to read and write basic English in order to be able to understand the industry regulated instruction sheets. Physical Requirements (lifting, etc.): • Ability to lift up to 50 lbs.; occasionally lift and move up to 75 pounds., • Must stand and walk on the production floor for a minimum of 6 hours per shift., • Uses hands to finger, handle, feel, or operate objects or controls, lifting to waist height and/or above shoulder height, frequent bending from the waist, or squatting, walking short distances., • Occasionally works from a rolling ladder or step stool, must be to lean over equipment as well as kneeling on the floor to clean under the equipment., • Must be able to wear all PPE including a lab coat, face mask, booties, gloves, safety glasses/goggles, and respirators. Work Environment (Office, Warehouse, temperature extremes, etc.): • Work is regularly performed inside a manufacturing environment where temperatures can be moderate, exposure to dust, odors, noise, and fumes. The noise level is usually moderate. Employees can be exposed daily to chemicals and cleaning agents. The above statements are intended to describe the general nature and level of work being performed by people assigned to this job. They are not intended to be an exhaustive list of all the job responsibilities, duties, skill, or working conditions. In addition, this document does not create an employment contract, implied or otherwise, other than an "at will" relationship. USPL is proud to be an Equal Opportunity Employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy), sexual orientation, gender identity or expression, national origin, age, genetic information, disability, protected veteran status, or any other characteristic protected by applicable local, state, or federal law. Benefits And Compensation: Our benefits are designed to help you move forward in your career, and in areas of your life outside of USPL. From health and wellness benefit options including: medical, dental, vision, short and long term disability, basic life insurance, supplemental life insurance, AD&D insurance. We also offer a matched 401(k) savings plan. Employees have the opportunity to receive compensation in the form of premium pay such as overtime, shift differential, holiday pay, sick time, etc. Newly hired employees receive up to 10 days of vacation the first year, which grows to 12 days starting the second year of employment. 2 nd shift = 3:30 pm to 11:30 pm

Job DescriptionResponsibilities • Operates cherry picker, forklifts, and other machinery to move items, or signals machine operators to move materials onto and off trucks, ships, and loading docks, • Prepare and complete orders for delivery or pickup according to schedule (load, pack, wrap, label, ship), • Receive and process warehouse stock products (pick, unload, label, store), • Perform inventory controls and keep quality standards high for audits, • Keep a clean and safe working environment and optimize space utilization, • Complete diary logs into inventory, • Report any discrepancies, • Follow quality service standards and comply with procedures, rules and regulations., • Experience using a RF Scanner, • Keeps inventory, loading areas, and machinery clean., • Responsible removing completed pallets from all machines., • Move materials from and to WIP locations., • Filling assembly machines with WIP Requirements and skills, • Proven working experience as a inventory worker, Forklift and cherry picker., • Proficiency in inventory software, databases and systems, • Familiarity with modern warehousing practices and methods, • Good organization time management skills, • Ability to lift heavy objects Pay Rate : $19 HR Location: Somerset ,NJ Powered by JazzHR IlctOtKh9l

As an Order Picker at Walmart, you will play a crucial role in fulfilling customer orders and maintaining optimal inventory levels within the warehouse. As an Order Picker at Walmart, you will be responsible for accurately and efficiently selecting merchandise from storage locations to fulfill custo

As a warehouse associate at Floor & Decor, you are the backbone of our retail location.Your key responsibilities will be compiling orders and replenishing and moving merchandise, whether it be on the sales floor or to a customer's vehicle.Your day will be spent checking inventory and orders, interac

Many employees start just expecting a paycheck but end up with a rewarding Warehouse Supervisor, Warehouse, Supervisor, Operations, Processing, Inventory Control, Technology.

Celerant Technology Corporation is a leading provider of premium, advanced retail management software for retail organizations. Our software, developed in-house, manages all areas of the retail business including point of sale, inventory management, warehouse, distribution, allocation, e-commerce, s

Kuehne+Nagel - JobID: 4513 [Material Handler / Freight Handler] As a Warehouse Specialist at Kuehne+Nagel, you'll: Manage inventory levels and ensure accurate stock counts; Operate forklifts and other warehouse equipment safely and efficiently; Pick and pack orders for shipment according to company

Cardinal Health - JobID: 79850dd3-9980-48ef-8511-e87e4b99f659 [Material Handler / Freight Handler] As a Warehouse Associate at Cardinal Health, you'll: Manage inventory levels by accurately counting and organizing medical supplies; Operate forklifts and other equipment to safely transport materials

Napa Auto Parts - [Material Handler / Freight Handler] As a Warehouse Associate at Napa Auto Parts, you'll: Expedite incoming and outgoing freight in the warehouse; Receive, stock, pull, stage, load and ship freight; Process inventory and maximize warehouse space usage; Check, verify, load, stock an