Welding training jobs in Paterson, New JerseyCreate job alerts

Overview: Interstate Waste Services is the most progressive and innovative provider of solid waste and recycling services in the country! We primarily service Northern New Jersey, Southern New York State, New York City, with a landfill located in Ohio, where we also own and operate a state-of-the-art rail-served landfill. We cater to a diverse range of residential, industrial and commercial customers. Our mission has always been to provide our customers with the highest quality waste, recycling and environmental services, while keeping focus on employee, customer and environmental safety. What makes our company culture unique is we have mastered the ability to balance the standards of a large corporate company while maintaining our small business family style culture. Essential Job Summary:: The Maintenance Technician Level B performs independent diagnostics, repairs, and preventive maintenance on MRF processing equipment while mentoring Level C technicians and supporting safe, reliable operations. Essential Job Functions: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Other minor duties may be assigned.: • Diagnose and repair mechanical, hydraulic, pneumatic, and basic electrical issues., • Perform PM inspections and corrective maintenance to standard., • Document work accurately in the CMMS., • Support outages, vendor work, and equipment installations., • Follow all safety, LOTO, and PPE requirements., • Mentor Level C technicians and reinforce safe work practices. Requirements and Qualifications::, • High school diploma or GED required., • 3–5+ years of hands-on maintenance experience., • Proficiency with mechanical systems and PM execution., • Ability to read service manuals and schematics. Preferred: • Experience in industrial maintenance, manufacturing, processing, recycling, municipal utilities, or material-handling systems., • Welding and fabrication skills. Interstate Waste Services provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Salary Range Minimum: USD $29.00/Hr. Salary Range Maximum: USD $32.00/Hr.

Overview: Interstate Waste Services is the most progressive and innovative provider of solid waste and recycling services in the country! We primarily service Northern New Jersey, Southern New York State, New York City, with a landfill located in Ohio, where we also own and operate a state-of-the-art rail-served landfill. We cater to a diverse range of residential, industrial and commercial customers. Our mission has always been to provide our customers with the highest quality waste, recycling and environmental services, while keeping focus on employee, customer and environmental safety. What makes our company culture unique is we have mastered the ability to balance the standards of a large corporate company while maintaining our small business family style culture. Essential Job Summary:: The Maintenance Technician Level A is the senior technical expert responsible for advanced diagnostics, complex repairs, and technical leadership across all MRF processing equipment. This role sets the standard for safety, workmanship, and reliability while mentoring lower-level technicians. Essential Job Functions: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Other minor duties may be assigned.: Advanced Diagnostics & Repair • Lead diagnosis and repair of complex mechanical, hydraulic, pneumatic, and limited electrical issues., • Perform major component rebuilds, overhauls, and precision alignment on critical processing equipment, • Serve as the technical lead on shift and mentor Level B and C mechanics., • Verify quality of repairs, PM execution, and documentation., • Execute and refine PM tasks; recommend changes to intervals and procedures., • Help plan daily plant maintenance workload and allocate jobs according to technician skill level., • Assist in specifying parts, evaluating repair options, and supporting warranty recovery efforts., • Support audits, safety inspections, and external regulatory reviews as the technical representative for the plant. Requirements and Qualifications::, • High school diploma or GED required., • 5+ years of industrial, fleet, or processing maintenance experience with demonstrated mastery of mechanical systems., • Strong welding and fabrication capability., • Proven ability to work independently and lead complex repairs. Preferred: • Experience as a senior technician or millwright in recycling, industrial maintenance, manufacturing, processing, aggregate, or material-handling environments., • OEM training on balers, conveyors, or processing systems. Interstate Waste Services provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Salary Range Minimum: USD $32.00/Hr. Salary Range Maximum: USD $35.00/Hr.

Overview: Interstate Waste Services is the most progressive and innovative provider of solid waste and recycling services in the country! We primarily service Northern New Jersey, Southern New York State, New York City, with a landfill located in Ohio, where we also own and operate a state-of-the-art rail-served landfill. We cater to a diverse range of residential, industrial, and commercial customers. Our mission has always been to provide our customers with the highest quality waste, recycling, and environmental services, while keeping focus on employee, customer, and environmental safety. What makes our company culture unique is we have mastered the ability to balance the standards of a large corporate company while maintaining our small business family style culture. Essential Job Summary:: The On-Road Technician / Installer is a mobile field service role responsible for installing, maintaining, and repairing compactors, containers, and related waste handling equipment at customer sites. This role involves working independently in the field, managing installations, troubleshooting issues, interfacing with customers, and ensuring safe, efficient setup and operation of equipment. This position requires mechanical, hydraulic, and light electrical knowledge, with a strong emphasis on safety, organization, and professionalism. Essential Job Functions: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Other minor duties may be assigned.: • Perform on-site installations of stationary and self-contained compactors, including leveling, mounting, and basic wiring or hydraulic connections., • Conduct preventive maintenance and service calls to inspect, troubleshoot, and repair compactors and other waste handling systems., • Interface with customers and facility personnel to confirm placement, functionality, and safety of installed equipment., • Coordinate with dispatch and shop teams for equipment delivery, site access, and post-install follow-up., • Test all components post-installation to ensure functionality and safety compliance., • Diagnose mechanical, hydraulic, and electrical issues in the field using manuals, diagnostic tools, and checklists., • Document work performed, parts used, and any customer concerns using service tickets or mobile forms., • Ensure proper use and maintenance of company truck, tools, and inventory., • Follow all safety protocols when working at industrial, retail, or construction sites., • Represent the company professionally, maintaining good communication and clean work practices at customer locations. Work Environment: This is a field-based position with frequent travel to customer sites. Technicians may be exposed to outdoor weather, confined spaces, heavy lifting, and noisy environments. PPE, including steel-toe boots, gloves, and eye protection, must be worn during all work. Requirements and Qualifications:: • 2+ years of experience in field service, mechanical installation, or compactor repair (preferred)., • Working knowledge of hydraulic systems, basic electrical components, and power tools., • Ability to read and interpret wiring diagrams, work orders, and technical manuals., • Valid driver’s license and clean driving record required., • Able to work independently, manage time effectively, and communicate clearly with customers., • Physically capable of lifting heavy parts, climbing ladders, and working in outdoor conditions., • Strong problem-solving skills and customer-focused mindset. This job description is intended to be an accurate representation of the general functions of the job, rather than exhaustive list of duties, responsibilities, or experience. Other duties may be assigned, requested, or required. Aspects of the job may be altered without notice. Interstate Waste Services provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Salary Range Minimum: USD $32.00/Hr. Salary Range Maximum: USD $48.00/Hr.

Note: This is an educational program, not a job. Successful completion of the program does not guarantee employment but will equip you with valuable skills for the trades and industry job market. Are you ready to build a hands-on career path in the trades and industry sector? Dreambound offers practical training programs that will equip you with the skills needed for various high-demand roles in skilled trades and technical industries. What programs are available? We offer specialized trade and industry training programs depending on your location, including: • Electrical Engineering, • HVAC, • Gunsmith, • Automotive Service Technician, • Cosmetology, • Tower Technician, • Welding, • Construction Manager, • Aviation Maintenance Technician, • Esthetician You'll receive hands-on training and comprehensive instruction to prepare you for certification (if relevant) and the trades and industry job market. Highlights : • Complete in as short as just a few weeks, • Flexible online and in-person options available This is an educational opportunity that requires a financial investment. Cost varies per partner school, but payment plans and / or financial aid may be available to those who qualify. Take the first step towards your new career path today!

Thank you for your interest in becoming part of the team at Legrand! GENERAL PURPOSE Under general supervision, this position is responsible for safely and correctly setting up, operating and shutting down basic Fabrication Equipment such as Tapping lines, Cold Saw, Hardware Insertion Equipment while maintaining the specified the quality, efficiency, and inventory control requirements. Work assignments will be scheduled based on training proficiency. DUTIES AND ACCOUNTABILITIES • Manually places material on the equipment and operates the machine to manufacture parts within the tolerance prescribed on blueprints., • Required to run Fabrication Machinery but not limited to Spot Welding, Press Brakes, Pem Serters, CNC Machinery, Harger Hardware Insertion, Cold Saw, etc., • Makes routine adjustments, up to and including tools at time to assure parts are within tolerance., • Must check parts to print using proper QC measuring equipment., • Responsible for loading/unloading machines and may check basic cross-reference information to assure correct part is being processed., • Perform any lower level duties such as filing, sanding, etc., • Ability to use computer and accurately confirm labor based on priority of the job board; expected to escalate any issues and/or delays to supervisor as needed., • Assures that basic quality checks are performed at specific intervals on machine parts., • Perform any other duties as required by Supervisor/Fabrication Manager to realization of departmental and corporate goals., • Inform area management of any hazardous situations in the work environment., • Works responsibly and efficiently, adhering to all safety rules and policies while maintaining good housekeeping practices. JOB REQUIREMENTS Essential Knowledge, Skills and Abilities Required: • Basic math skills and communication skills, • Demonstrated ability to use and interpret measurement tools such as tape measure and calipers, • Ability to read and interpret Engineering drawings, • Demonstrated mechanical aptitude, • Ability operate industrial machines, • Good motor coordination, • Ability to work well in a team environment, • Proven reliability - attendance and punctuality, • Ability to read, write and speak English is preferred Minimum Education and Experience: • High school diploma, GED or technical certification preferred, • 0-2 years of minimum experience WORKING CONDITIONS/PHYSICAL DEMANDS • While performing the duties of this job, the employee is required to stand for 8 hours/day while making coordinated movements of the hands and fingers to grasp/pinch, manipulate and assemble objects. This may include frequent use of vibrating/pneumatic tools, overhead and outstretched reaching with arms, bending/twisting/stooping, kneeling/squatting and frequently lifting/carrying up to 50 lbs. throughout the day and occasionally push/pull/lift up to 100 lbs. as needed. Although on a regular basis lifting requirements may not exceed 40 lbs. Occasionally, depending on the tasks assigned for the day, you may have to sit or stand more or less frequently. Work may be repetitive in nature., • May be exposed to sharp edges., • May occasionally be exposed to smoke, hot metal, dust, high noise level., • Tolerate a non-temperature controlled environment. Legrand is proud to be an Equal Opportunity Employer. You will be considered for this position based upon your experience and education, without regard to race, color, religion, age, sex, national origin, sexual orientation, ancestry; marital, disabled or veteran status. We are committed to creating and maintaining a workforce environment that is free from any form of discrimination or harassment. If you'd like to work in a fun, creative, business-casual environment that offers a comprehensive benefit package, we encourage you to apply! Legrand is an equal employment opportunity employer. For California residents, please see the link for the ______. California law requires that we provide you this notice about the collection and use of your personal Information.

$32 - $36 per hour // Multiple shifts available // 22 days of PTO // Medical, Dental, Vision, and 401K This Jobot Job is hosted by: Braden Prater Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $32 - $36 per hour A bit about us: Our Client is a growing Food Packaging Manufacturer in Great Atlanta GA. Why join us? Multiple shifts available Scheduled 9-hour shifts. Rotating weekend shifts (8-hour shifts). Average 8–12 hours OT per week. Plenty more if desired. Compensation & Benefits Pay: $32–$36/hr. Benefits: Medical, dental, vision, 401K. 22 days PTO (with floating holidays, accrual-based). 8 recognized holidays. Job Details Job Description SUMMARY The Maintenance Technician II is responsible for performing skilled maintenance and repair work on complex mechanical, electrical, HVAC, and facility systems. This includes troubleshooting and repairing equipment in compliance with standard operating procedures, safety policies, manufacturer specifications, and company requirements. The role also manages spare parts inventory, recommends tools and supply purchases, and supports efficiency improvements within the facility. Additionally, this position provides guidance and oversight for less experienced technicians. ACCOUNTABILITIES Identify, troubleshoot, and resolve mechanical or electrical safety issues. Evaluate equipment and facility needs, recommend solutions, and implement corrective actions to reduce downtime and improve overall efficiency. Maintain purchasing and inventory controls for spare parts, tools, and supplies. Support installations, equipment startups, and ongoing facility projects. Assist with daily and weekly operational support for assets and equipment. Participate in training warehouse and operations personnel as needed. Contribute to special projects and continuous improvement initiatives directed by management. Plan and carry out corrective, preventive, and predictive maintenance activities. EXPERIENCE 3–5 years of experience in industrial or facility maintenance, including work with high-volume conveying systems. 3+ years of experience with PLCs and advanced electrical troubleshooting/repair. Hands-on experience with motors, electrical controls, water systems, large washers, and high-volume operations. Background in welding, pipe installation/repair, and boiler/heating systems. Prior experience performing general facility maintenance such as doors, forklifts, and office infrastructure. SKILLS Strong mechanical and electrical troubleshooting skills. Proficiency with PLC programming and repair. Ability to support and maintain high-volume material handling and conveying systems. Experience with fabrication and facility repair work (welding, piping, heating/boiler systems). Familiarity with maintenance best practices, including preventive and predictive maintenance methods. Ability to mentor and support junior technicians while working in a fast-paced environment. WORK ENVIRONMENT & PHYSICAL DEMANDS Manufacturing or warehouse environment with moderate to high activity levels. Frequent standing, walking, bending, and reaching required. Regular lifting of up to 50 lbs, with occasional lifting up to 80 lbs. Exposure to noise, heat, and moving equipment is common. Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

Overview: Shift: Monday-Friday 7:00 AM - 4:30 PM Pay Rate: $28.00-$32.00 per hour Interstate Waste Services is the most progressive and innovative provider of solid waste and recycling services in the country! We primarily service Northern New Jersey, Southern New York State, New York City, Connecticut, with a state-of-the-art rail served landfill located in Ohio. We cater to a diverse range of residential, industrial and commercial customers. Our mission has always been to provide our customers with the highest quality waste, recycling and environmental services, while keeping focus on employee, customer and environmental safety. What makes our company culture unique is we have mastered the ability to balance the standards of a large corporate company while maintaining our small business family style culture. Essential Job Summary:: The A Welder / Fabricator is a senior-level technician responsible for high-quality welding, fabrication, and structural rebuilding of steel containers and compactors. This role requires advanced skills in MIG and stick welding and custom fabrication. The A Welder works independently on complex repair tasks and supports the training and development of entry-level team members. Essential Job Functions: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Other minor duties may be assigned.: • Perform advanced MIG welding, stick welding and metal fabrication on a variety of container types and compactor components., • Rebuild or replace structural frames, bottoms, lids, caster brackets, and mechanical parts using custom-cut steel., • Interpret repair orders and/or sketches to execute precise rebuilds or modifications., • Use cutting torches, plasma cutters, grinders, and bending tools to shape and prepare materials., • Lead fabrication of specialized equipment or container configurations as needed for customer orders., • Perform quality control checks to ensure all welds meet company standards., • Mentor and train junior welders and assist with onboarding of new hires., • Maintain clean and organized welding area and perform basic preventative maintenance on shop tools., • Track parts used and time spent on custom or complex builds for cost analysis., • Collaborate with supervisors Requirements and Qualifications::, • Minimum 3–5 years MIG welding, stick welding and fabrication experience in industrial or structural repair settings., • Proven ability to perform precise welds in various positions and on worn or contaminated metal., • Advanced skills using fabrication tools including shears, brakes, torches, and weld jigs., • Self-motivated and capable of leading complex projects with minimal supervision., • Strong safety awareness and adherence to PPE and shop protocols., • Ability to lift heavy materials, work outdoors in all weather conditions, and operate yard equipment as needed. Work Environment This role involves working in a combination of indoor shop and outdoor yard environments. Frequent exposure to welding heat, welding fumes, grinding dust, metal shavings, and heavy lifting is expected. Welding hood, gloves, respirator (when applicable), safety glasses, steel-toe boots, and hearing protection are required daily. Additional Information: This job description is intended to be an accurate representation of the general functions of the job, rather than exhaustive list of duties, responsibilities, or experience. Other duties may be assigned, requested, or required. Aspects of the job may be altered without notice. Interstate Waste Services provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Salary Range Minimum: USD $28.00/Hr. Salary Range Maximum: USD $32.00/Hr.

Based in St. Louis, Core & Main is a leader in advancing reliable infrastructure with local service, nationwide. As a specialty distributor with a focus on water, wastewater, storm drainage and fire protection products and related services, Core & Main provides solutions to municipalities, private water companies and professional contractors across municipal, non-residential and residential end markets, nationwide. With over 370 locations across the U.S., the company provides its customers local expertise backed by a national supply chain. Core & Main's 5,700 associates are committed to helping their communities thrive with safe and reliable infrastructure. Visit ___ to learn more. Job Summary Responsible for permanently joining metal parts using high heat application to form a permanent bond. May specialize in one of hundreds of different processes of welding to join metals together. Will use automatic or semi-automatic machines and related equipment in a continuous production/processing operation. Performs all work in accordance with established safety procedures. Major Tasks, Responsibilities and Key Accountabilities • Hand welds various fittings to different sizes of pipes and welding joints., • Interprets application job sheets and various sizes of welding fittings., • Analyzes all welds to ensure they are free of porosity and discontinuities., • Ensures all welds are visibly stamped or identified with markings to designate that welds were performed by a certified welder., • Reviews the order ticket and determines whether the work to be performed meets the customer's specifications., • Verifies the final product meets quality control standards., • Performs other duties as assigned. Preferred Qualifications • Certified pressure pipe welder, • Experience in full pen welds and pipe fitting welds, • Ability to qualify and maintain all shop weld procedures Typical Training/Experience • HS Diploma or GED, strongly preferred., • Selects correct processes from clearly prescribed rules, past practices, or instruction., • Seeks advice and guidance on non-routine or problem areas from supervisor., • Under close supervision, exercises limited latitude/independent judgment., • Work typically involves detailed checks or close review of output by a senior coworker and/or supervisor. Environmental Job Requirements • Ability to lift and carry up to 50lbs in a physical environment. This information indicates the general nature and level of work performed by associates in this role. It is not designed to contain a comprehensive inventory of all duties, responsibilities, and qualifications required of associates assigned to this role. This description supersedes any previous or undated descriptions for this role. Management retains the right to add or change the duties of the position at any time. Pay: $20.20 - $28.85 per hour. Core & Main is an Equal Employment Opportunity employer. Employment at Core & Main is based solely on a person's merit and qualifications directly related to professional competence. Core & Main does not discriminate against any employee or applicant on the basis of race, creed, color, religion, national origin, nationality, ancestry, age, disability, veteran status, pregnancy or related condition (including breastfeeding), affectional or sexual orientation, gender identity or expression, marital status, status with regard to public assistance, citizenship, or any other basis protected by law. None of the questions in this application are intended to elicit information regarding any protected characteristics, nor imply any limitation, illegal preferences or discrimination based upon non-job-related information or protected characteristics. For more information, please ___ or visit

Job DescriptionFounded in 1985, ATS is a company with a presence in the United States, Mexico and the United Kingdom. We are professionals in Industrial Maintenance and we make factories run better.Fundada en 1985, ATS es una empresa con presencia en los Estados Unidos, México y el Reino Unido. Somos profesionales en mantenimiento industrial y hacemos que las fábricas funcionen mejor. Principal Duties/Responsibilities: · Performs expert level break-fix & preventative maintenance. This includes but is not limited to: observing devises in operation to locate root cause of problem; dismantling devices to gain access to and remove defective parts; examining parts to detect imperfections; adjustment of functional parts of devices and control instruments; repair and/or replacement of defective parts; testing of device to observe performance; and performing tests for electrical circuitry and mechanical systems; reconditioning and repairing machine tools. · Identifies and sources parts, supplies and repair items as necessary. Performs evaluations of alternatives to improve cost and / or reliability of equipment. · Independently performs maintenance as per industry standards. · Works with Planner Scheduler to optimize preventative maintenance procedures. · May be required to setup and operate multiple machining operations including but not limited to: lathe, drill press, grinder, and other metalworking tools to make and repair parts. May perform welding tasks. · Complies with 5S and housekeeping standards. · Leads, drives and participates in CI activities--processes, results and cost savings using CI tools and methodology. · Provides assistance to lower level technicians and leadership to project teams. Performs expert functions as a part of training and development. · Troubleshoots and analyzes complex control systems to resolve in-depth software/ hardware and configuration problems. · Utilizes predictive maintenance technologies to collect equipment performance data. Observes trends and makes recommendations. · Updates records and reviews CMMS history and analyzes data. · Completes and conducts on-the-job training and technical self-study programs for career development. · Follows all safety related policies, rules, regulations, technical instructions and guidelines. Situational awareness and identify unsafe behaviors and conditions. Knowledge, Skills, Abilities, & Behaviors Required: · High School Graduate or equivalent (GED). · Associates degree with a Technical focus and 5 years of related experience in specific industry; or, 7 years of experience in specific industry. · Experience in predictive technologies, precision alignments, and general maintenance of applicable process equipment. · Understands electrical, mechanical, fluid power and control systems. Can analyze the problem, synthesize alternative solutions, and perform repairs. · Must be able to use basic hand tools and specialized tools as appropriate. · Experience in vibration analysis or laser interferometer operations, precision alignments, and maintenance of applicable process equipment. · May be required to travel. Physical Demands and Working Conditions: While performing the duties of this job, the employee is regularly required to stand; walk; use hands/fingers to handle, or feel; reach with hands and arms; climb, ascend/descend or balance to heights that may require a ladder or lift; stoop, kneel, crouch, or crawl in confined spaces; and talk or hear. The employee is occasionally required to sit. The employee must occasionally lift and/or move more than 50 pounds. The employee is regularly required to use close vision and color vision. The employee is occasionally exposed to outside weather conditions and risk of electrical shock. Work is typically performed in a factory environment and is usually very loud. In the factory environment, the employee may be exposed to hazardous materials and/or greasy or slippery factory floors. ATS believes in fair and equitable pay. Please note that actual salaries may vary within the range, or be above or below the range, based on factors including, but not limited to, education, training, experience, professional achievement, business need, and location. We also offer market leading benefit programs including Medical, Dental and Vision plans, PTO, a 401k retirement plans with employer matching, tuition reimbursement, and more. Pay Range$40.11—$51.32 USDATS is committed to providing equal employment opportunities in all aspects of employment to all applicants and employees without regard to age, color, race, religion, sex (including pregnancy, gender identity, and sexual orientation), national origin, disability, veteran status, genetic information, or other legally protected status. Review the privacy policy here.ATS se compromete a brindar igualdad de oportunidades de empleo en todos los aspectos del empleo a todos los solicitantes y empleados, independientemente de su edad, color, raza, religión, sexo (incluido el embarazo, identidad de género y orientación sexual), origen nacional, discapacidad, estatus de veterano, información genética u otro estatus legalmente protegido. Revisión de la política de privacidad aquí here.

Job Description Manufacturing Manager (Electro-Mechanical Equipment) We are seeking an experienced Manufacturing Manager (or) a seasoned Supervisor ready to transition to a PM with a background in manufacturing of electro-mechanical machinery, and capital equipment. (We will invest in your training, bringing you up to speed with our products) Responsibilities: • Maintained current production schedule, updated daily to track all aspects of equipment orders as they progress and communicate progress., • Manage six (6) supervisors directly, and fifty (60) indirect reports., • Provide the means to establish realistic production schedules that can be met, and schedules that will allow the Company to be competitive with respect to equipment manufacturing lead-times., • Ensure the accurate and timely entry of Production Department data into the IT system., • Conduct weekly production meetings with all applicable Production Personnel to discuss all aspects of production scheduling., • Ensure the proper handling and disposal of all hazardous materials used in the manufacturing process, • Prepare and conduct timely performance reviews for subordinate employees, • Work closely with the 'Materials Manager', who in turn, works closely with the Purchasing Department., • Assist in developing accurate manufacturing time studies that are necessary to develop realistic production scheduling and equipment manufacturing costs, • Ensure that all departments provide the type of cooperation that is essential for Production to meet commitments., • Conduct production meetings to ensure solid inter-departmental communication and continuity regarding all production-related matters., • Ensure a safe and secure work environment within the manufacturing facility., • Prioritize safety as a core value in all aspects of production., • Foster a culture of safety and accountability to minimize workplace incidents and enhance workforce well-being and productivity., • Ensure that the Production Testing Facilities in both buildings are appropriately equipped and maintained clean and tidy Requirements: • Ability to lead, mentor and coach team members., • Solid track record in overall plant management, • Strong work ethic and a high-energy level, • Prior experience with an ERP or MRP system, • Experience in supervision of the production department of a small to medium-size manufacturer., • Exposure to organizations that have in-house sheet metal, welding & fabrication, machine shops., • Mechanical or Industrial Engineering degree, a plus- NOT required., • Experience organizing production operations with a specialty machinery manufacturer., • Organizational Skills:, • Ensuring smooth manufacturing processes, • Meeting deadlines, • Efficiently utilizing resources, • Problem-Solving:, • Identifying issues, • Analyzing root causes, • Implementing effective solutions, • Communication:, • Facilitating clear communication between departments, • Communicating effectively with the workforce, • Adaptability:, • Adjusting production schedules, • Modifying processes, • Allocating resources to adapt to changing environments., • Attention to Detail:, • Maintaining precise specifications, • Upholding quality standards throughout production, • Safety Focus:, • Creating and maintaining a safe work environment, • Promoting a safety culture among the workforce, • Customer Focus:, • Understanding and meeting customer needs, • Ensuring timely delivery and maintaining quality Qualifications: • Close vision, and color vision ability required, • Safely and effectively lifting, carrying, and moving objects of varying weights, • Bending, stooping, reaching, balancing, standing, and walking for extended periods and maintaining the necessary physical dexterity and coordination, • Working in various environmental conditions, which may include exposure to varying temperatures, and noise levels at times Physical Requirements: • Safely and effectively lift, carry, and move objects of varying weights., • Bending, stooping, kneeling, reaching, climbing, balancing, standing, and walking, for extended periods and maintain the necessary physical dexterity and coordination., • Work in various environmental conditions, which may include exposure to varying temperatures, weather, and noise levels. What we offer: • A dynamic, flexible culture, that promotes collaboration and professional/ personal growth of each team member., • To be a part of a well-established team that values hard work, innovation & knows the value of its people., • Coaching and mentoring, helping team members realize their potential, aiding in defining goals and executing them., • We have an aggressive growth strategy; Making way for ample advancement opportunities to transition into operations and/or direct management., • Competitive base package + bonus plan, • We have continuous training, and are firm believers that a strong, knowledgeable, well-trained staff is the reason we are at the top of our field, having continued success., • Our goal as leaders is to provide value, value to our clients, vendors and more importantly to our team- YOU. Looking forward to getting to know you… We are, and work with clients that are equal opportunity employers and considers all applicants for positions without regard to race, color, religion, gender, sexual orientation, age, national origin, disability, veteran status, or any other protected status.

Job Description TIG WELDER Aero Manufacturing Co an industry leader in the design, manufacturing and distribution of custom stainless-steel equipment for the food service, Plumbing and materials handling industry is looking for experienced TIG welders responsible for fitting and welding of stainless steel parts using TIG process. PRIMARY RESPONSIBILITIES o Set up welding machines o Read and interpret blueprints and/or drawings to determine the specific welding requirements o Fit and TIG weld stainless steel components based on the specifications of the blueprints and/or drawings o Insure work conforms to prints and quality requirements. o Follow production plans and required daily output requirements. o Assists with material cutting and preparation as needed. Including sawing, grinding and deburring. o Keep work areas clean and organized and take proper care of all equipment and facilities o Provide a great level of attention to detail and focus on the given task o Follow all safety rules and quality standards o Work together with team members to maximize productivity and efficiency KNOWLEDGE AND SKILL REQUIREMENTS o High School Diploma or equivalent preferred o One-year related experience and/or training through a certified training facility. o Experience with stainless steel TIG welding required o Ability to lift up to 50 pounds independently. o must be able to stand, kneel, stoop. o Ability to identify and measure material types and thicknesses o Ability to produce quality products consistently o Ability to follow instructions given both verbally and in written form o Must be reliable with a strong work ethic We are an Equal Employment Opportunity Employer. We offer a competitive salary with great benefits. The position is full-time; Monday-Friday. 1st shift, 7:30 Am to 4:00 PM with some overtime. Benefits: o Retirement Plan o Health insurance o Paid time off Schedule: o 8-hour shift o Day shift o Monday to Friday o Overtime Work Location: One location

Job Description Aero Manufacturing Co an industry leader in the design, manufacturing and distribution of custom stainless-steel equipment for the food service, Plumbing and materials handling industry is looking for experienced TIG welders responsible for fitting and welding of stainless steel parts using TIG process. PRIMARY RESPONSIBILITIES o Set up welding machines o Read and interpret blueprints and/or drawings to determine the specific welding requirements o Fit and TIG weld stainless steel components based on the specifications of the blueprints and/or drawings o Insure work conforms to prints and quality requirements. o Follow production plans and required daily output requirements. o Assists with material cutting and preparation as needed. Including sawing, grinding and deburring. o Keep work areas clean and organized and take proper care of all equipment and facilities o Provide a great level of attention to detail and focus on the given task o Follow all safety rules and quality standards o Work together with team members to maximize productivity and efficiency KNOWLEDGE AND SKILL REQUIREMENTS o High School Diploma or equivalent preferred o One-year related experience and/or training through a certified training facility. o Experience with stainless steel TIG welding required o Ability to lift up to 50 pounds independently. o must be able to stand, kneel, stoop. o Ability to identify and measure material types and thicknesses o Ability to produce quality products consistently o Ability to follow instructions given both verbally and in written form o Must be reliable with a strong work ethic We are an Equal Employment Opportunity Employer. We offer a competitive salary with great benefits. The position is full-time; Monday-Friday. 1st shift, 7:30 Am to 4:00 PM with some overtime. Benefits: o Retirement Plan o Health insurance o Paid time off Schedule: o 8-hour shift o Day shift o Monday to Friday o Overtime Work Location: One location

Job Description NIGHT SHIFT: Monday through Friday - 1:30 PM – 10:30 PM MCI is North America’s leader in motor coaches for both the public and private markets. We are seeking a skilled and reliable Heavy Duty Bus and Coach Mechanic to join our team in maintaining and repairing our diverse fleet. Are you a seasoned mechanic with a passion for both traditional and emerging vehicle technologies? In this hands-on role, you will be responsible for performing diagnostics, repairs, and preventive maintenance to ensure our vehicles—from diesel-powered buses to electric drivetrains—are safe, efficient, and ready for service. Your expertise will be key in keeping our fleet operating at peak performance. What You Will Do: • Diagnosing and Repairing Diesel Engines: Apply your expertise to troubleshoot and repair diesel engines. Perform both minor and major overhauls to keep our engines running efficiently., • Drive Line Component Maintenance: Remove, repair, and replace crucial drive line components such as transmissions, drive shafts, and differentials., • Engine and Body Accessory Repairs: Maintain and repair essential engine and body accessories, including heating and air conditioning systems (HVAC), alternators, generators, voltage regulators, and suspension components., • Braking System Inspection: Conduct thorough inspections and repairs of braking systems to maintain the safety and effectiveness of our fleet., • Electrical Systems Troubleshooting: Diagnose and repair electrical systems and components, ensuring all systems function correctly and efficiently., • Seating, Steering, and Glass Installations: Assisting to perform installations and repairs of seating, steering components, and glass, ensuring comfort and functionality for passengers., • Electric Bus Maintenance: Work on electric buses, including maintaining and inspecting high-voltage systems, battery packs, and electric drivetrains. What You Need to Be Successful: • Technical Expertise: Experience with diesel engines, driveline components, and electrical systems. Familiarity with electric vehicle maintenance is a plus., • Tool Proficiency: Proficiency with diagnostic devices (e.g., DDEC and ATEC readers), A/C recovery and charging equipment, and shop tools (e.g., hydraulic presses, pullers, manometers, tachometers, decelerometers, VOA instruments, dial indicators, micrometers, reamers, hones, vacuum and compression pumps, brake lathes, and other power tools) is highly valued., • Certification: Additional certifications related to electric vehicles or advanced diagnostics are beneficial but not required, • Experience in Fabrication and Machining (Optional): Skills in welding, machining, or fabrication are a plus. Including the ability to utilize these skills to address unique repair needs and contribute to custom modifications as required., • Safety and Precision: Strong understanding of safety practices and effective use of personal protective equipment., • Team Collaboration: Ability to work independently and as part of a team. Strong communication and organizational skills. Why Join Our Team: • Benefits starting day one of employment!, • Competitive Wages, • Comprehensive Benefits Package: Eligible for benefits on the first day of employment, including:, • 401(k) with employer match, • Health, dental, and vision coverage, • Basic dental option with a $0 paycheck contribution available, • Vision plan with $0 paycheck contribution, • Company Paid HSA (Health Savings Account) Contribution when enrolled in the High Deductible medical plan with HSA., • Healthcare and Dependent Care Flexible Spending Accounts (FSA) available, • Company-paid Basic Life, AD&D, and short-term disability insurance, • Employee Assistance Program, • Voluntary benefits including critical illness, hospital indemnity, and accident insurance., • Paid holidays, • Paid time off, • Modern Work Environment: Work in clean, state-of-the-art facilities with the latest tools and technologies., • Career Growth: Ongoing training and development through a variety of initiatives, with tuition subsidies for external courses to support your professional advancement. OUR WHY: We exist to move people. Our mission is to design and deliver exceptional transportation solutions that are safe, accessible, efficient and reliable. NFI Group is a leading independent global bus manufacturer providing a comprehensive suite of mass transportation solutions. News and information is available at , , , , , , and .

Job Description We are seeking a bilingual part-time Welding Instructor with fluency in English and Spanish (written and spoken) to work alongside the senior instructor, follow the welding curriculum, and support students in the classroom and welding lab. This is a part-time, hourly position. Schedule: Monday and Tuesday, 8:30 a.m. to 2:30 p.m. Additional hours may be available in the fall. Duties and Responsibilities • Assist with student instruction in both the classroom and welding lab, • Guide and support student learning in a safe, structured environment, • Demonstrate welding, cutting, fitting, and fabrication techniques, • Prepare materials and projects for instruction, • Weld, fabricate, cut, and visually inspect welds on a variety of materials and processes, • Work with mild steel, stainless steel, and aluminum, • Facilitate workshop sessions as needed, • Communicate clearly with students in both English and Spanish, • Enforce all shop and lab safety procedures, • Perform other duties as assigned Qualifications • Must be fluent in both English and Spanish, with strong written and verbal communication skills., • Current welding certification or completion of an AWS program, trade school, 900-hour welder/fabricator program, or equivalent training, • and 5-7 years of documented industry experience with teaching experience- OR- 7+ years experience with no teaching experience, • Minimum of 5 years of experience in fabrication, fitting, ironwork, welding, CNC, pipe, or related metalworking industries, whether civilian or military, • Strong knowledge of welding theory, welding code requirements, and certification standards, • Demonstrated commitment to workplace and lab safety, including the ability to follow and enforce safety protocols, • Ability to work effectively with students of diverse backgrounds, skill levels, and learning needs, • Ability to pass a multi-process welding and cutting evaluation, • Comfortable demonstrating and instructing SMAW, GMAW, FCAW, GTAW, plasma cutting, and oxy-fuel cutting in multiple positions, • Bend test certification, • OSHA certification, • Torch and fire watch certification, • DOT certification The completion of a background check will be required for the selected candidate. Compensation: The minimum pay for this position is $28 per hour. Benefits: • New Jersey Sick Leave: Earn 1 hour of sick leave for every 30 hours worked with a maximum of 40 hours of leave per benefit year. (Eligible to use after successful completion of probationary period.), • Employee Assistance Program provides free, confidential, limited counseling services, work-life assistance, legal and financial guidance., • Commuter Benefits: Free parking access is provided on site. An optional Transit Pre-Tax Plan is available which allows employees to use pre-tax dollars to purchase eligible transit expenses., • NJ Defined Contribution Retirement Program provides eligible members with a tax-sheltered, defined contribution retirement benefit, along with life insurance and long-term disability coverage. (Must meet eligibility requirements.)

Job Description Job Summary The Small Engine Mechanic will be responsible for diagnosing, repairing, and maintaining a wide range of landscaping and construction equipment, including two-stroke and four-stroke engines, compact equipment, and handheld tools. Key Responsibilities: · Inspect, diagnose, and repair small engines, including lawnmowers, chainsaws, trimmers, blowers, generators, and snow blowers. · Perform routine maintenance, including oil changes, air filter replacements, carburetor adjustments, and spark plug installations. · Troubleshoot electrical, fuel, and mechanical systems to ensure optimal equipment performance. · Maintain service records and track completed repairs using internal systems. · Order necessary parts and ensure inventory is maintained for common repairs. · Communicate clearly with supervisors and operators about equipment status and timelines. · Maintain a clean, organized, and safe work environment. · Assist in seasonal equipment prep and winterization. Qualifications · High school diploma or equivalent; trade school or technical certification preferred. · Minimum of 2 years' experience repairing small engines or related mechanical work. · Strong knowledge of gas-powered and diesel-powered small engines, hydraulic systems, and two- and four-cycle engines. · Ability to read and interpret schematics and service manuals. · Valid driver's license with clean driving record. · Ability to lift 50 lbs and work in various weather conditions. Preferred Skills · Experience with landscaping or construction equipment. · Welding and fabrication skills a plus. · Bilingual (Spanish/English) is a plus. · OSHA 10/30 certification preferred, or willingness to obtain. Schedule & Compensation • Full-time position | Monday–Friday, 7:00 AM – 3:30 PM, • Pay: $24-32 hourly (Depending experience, certifications, and licensing)