Welding training jobs in San Diego, CaliforniaCreate job alerts

Overview Quality Control shall have a strong knowledge of all inspection procedures and utilization of required measuring devices that correspond to the tasking in which they are assigned. Perform shipboard/alteration inspections referencing MIL-STD's, NAVSEA Standard Items, and MIL-SPEC's. Provide detailed reports documenting all "As Found" conditions during inspection, including Quality Assurance Workbook. Verify proper documentation of all required repairs and communicate identified deficiencies to production to initiate corrective actions. Ensure that all test and inspection documentation is accounted for and thoroughly completed prior to certification. Must have the ability to read and interpret blueprints, sketches, written technical instructions and manuals to develop Test and Inspection QA Workbooks, incorporating V, I, and G level inspection points to Test and Inspection Plans (TIP). Pay Range: $34.69 - $55.50 We offer an excellent benefits package including \n • A competitive salary\n, • Medical, dental, vision, life, and disability insurance\n, • Paid-time off\n, • Tuition reimbursement\n, • 401k Retirement Plan\n, • Military Reserve pay offset\n, • Work directly with QAM, and Project Manager(s) to ensure all inspections requirements are properly identified in the Quality Assurance Workbook.\n, • Thorough knowledge of NAVSEA Standard Items, NAVSEA Technical Specification 9090-310, MIL-STDs and MIL-SPECs to objectively review on board installations and associated Objective Quality Evidence.\n, • Responsible to ensure that the quality of the product or services provided to the customer through the performance and documentation of all required inspections is in accordance with corresponding contractual requirements and company procedures.\n, • Review and certify all data, ensuring that performance and quality of products conform to establish company, international (ISO), and governmental regulatory standards and agency guidelines, and to ensure lasting customer satisfaction.\n, • Candidate must possess C5ISR Installation, Quality Assurance, or Quality Control experience.\n, • Approve finished products by confirming specifications; conducting visual and measurement tests; returning products for re-work; confirming re-work.\n, • Ensure that all QA forms, Test documents and any other form of Objective Quality Evidence (OQE) requiring initials, signatures or any other verifiable form or acknowledgement of completion are done in accordance with all applicable requirements.\n, • Maintain safe and healthy work environment by following standards and procedures, complying with legal regulations.\n, • High school diploma / GED with 6-8 years of experience\n, • ISO Lead Auditor Training a plus\n, • Certified Quality Inspector Certification\n, • NAVSEA Connector Certification\n, • NAVSEA Cableway Certification\n, • NAVSEA Fiber Optic QA/Supervisor Training\n, • Structural fit-up, welding, pipefitting, and NDT Level II experience/qualification is a plus.\n, • Active OSHA 7615 Maritime Training 10hr Card\n, • Exposure to computer screens for an extended period of time.\n, • Sitting for extended periods of time.\n, • Reach by extending hands or arms in any direction.\n, • Have finger dexterity in order to manipulate objects with fingers rather than whole hands or arms, for example, using a keyboard.\n, • Listen to and understand information and ideas presented through spoken words and sentences.\n, • Communicate information and ideas in speaking so others will understand.\n, • Read and understand information and ideas presented in writing.\n, • Apply general rules to specific problems to produce answers that make sense.\n USD $34.69 - USD $55.50 /Hr.

Note: This is an educational program, not a job. Successful completion of the program does not guarantee employment but will equip you with valuable skills for the trades and industry job market. Are you ready to build a hands-on career path in the trades and industry sector? Dreambound offers practical training programs that will equip you with the skills needed for various high-demand roles in skilled trades and technical industries. What programs are available? We offer specialized trade and industry training programs depending on your location, including: • Electrical Engineering, • HVAC, • Gunsmith, • Automotive Service Technician, • Cosmetology, • Tower Technician, • Welding, • Construction Manager, • Aviation Maintenance Technician, • Esthetician You'll receive hands-on training and comprehensive instruction to prepare you for certification (if relevant) and the trades and industry job market. Highlights : • Complete in as short as just a few weeks, • Flexible online and in-person options available This is an educational opportunity that requires a financial investment. Cost varies per partner school, but payment plans and / or financial aid may be available to those who qualify. Take the first step towards your new career path today!

Start Your Civilian Career with a Global Leader in Dairy Manufacturing Locations: • Greeley, CO, • Lemoore, CA, • Fort Morgan, CO, • Allendale, MI Leprino is offering transitioning service members the opportunity to gain hands-on experience in industrial maintenance through our DoD SkillBridge Maintenance Technician Trainee Program. This 4-6 month program provides immersive, on-the-job training in one of the world’s leading dairy foods manufacturing companies, setting you up for a seamless transition into a high-demand civilian career. At Leprino, we pride ourselves on innovation, teamwork, and a strong commitment to excellence. As the largest producer of mozzarella cheese and a global leader in dairy ingredients, we understand the value of highly skilled technical professionals. This program is designed to bridge your military expertise into a thriving career in industrial maintenance. What You’ll Learn & Do As a Maintenance Technician Trainee, you’ll be working alongside seasoned maintenance professionals, gaining real-world experience in maintaining and troubleshooting advanced manufacturing equipment. Key Responsibilities: • Perform preventive maintenance on conveyors, motors, pumps, valves, and hydraulic systems., • Conduct vibration analysis and thermal imaging to predict equipment failures., • Work with lubrication systems to maintain production equipment., • Diagnose and repair mechanical, hydraulic, pneumatic, and electrical systems., • Troubleshoot three-phase motors, motor controls, and Variable Frequency Drives (VFDs)., • Work with steam boilers, refrigeration systems, and ammonia-based cooling systems., • Gain hands-on experience with Programmable Logic Controllers (PLCs) and Human-Machine Interfaces (HMIs)., • Assist in diagnosing automation system issues using SCADA and industrial networking., • Perform welding and fabrication for minor equipment repairs and modifications., • Enter maintenance data and track equipment history in SAP or another CMMS software., • Support installation, setup, and commissioning of new processing and packaging equipment., • Work on projects involving robotic automation and advanced processing technology., • Participate in Lean Manufacturing and Continuous Improvement (CI) initiatives to enhance equipment efficiency., • Follow OSHA safety standards, Lockout/Tagout (LOTO) procedures, and food safety (GMP, HACCP) protocols., • Learn arc flash safety and work in high-voltage environments safely and effectively. This is a structured training program with direct mentorship, on-the-job learning, and exposure to industry-leading maintenance practices that will set you up for long-term career success. Who We’re Looking For Military service members eligible for the DoD SkillBridge Program (within 180 days of separation). Experience in the following military maintenance roles: • Army: 15-series MOS (Aviation Maintenance Technicians)., • Navy: Engineman (EN), Machinist’s Mate (MM), Electrician’s Mate (EM), Hull Maintenance Technician (HT), Gas Turbine Systems Technician (GS), Machinery Repairman (MR)., • Marines: 60/61/62 (Aircraft Maintenance)., • Air Force: Aircraft Maintenance (2A5X1, 2A3X3), HVAC/R (3E1X1)., • Coast Guard: Machinery Technician (MK), Electronics Technician (ET), Aviation Maintenance Technician (AMT), Electrician’s Mate (EM) Apply Today! Take the first step toward a rewarding civilian career. If you're a transitioning service member looking for a hands-on, high-paying career in industrial maintenance, we encourage you to apply! 📩 Contact: Iassen Donov – 🌐 Visit: to learn more.

$32 - $36 per hour // Multiple shifts available // 22 days of PTO // Medical, Dental, Vision, and 401K This Jobot Job is hosted by: Braden Prater Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $32 - $36 per hour A bit about us: Our Client is a growing Food Packaging Manufacturer in Great Indianapolis IN. Why join us? Multiple shifts available Scheduled 9-hour shifts. Rotating weekend shifts (8-hour shifts). Average 8–12 hours OT per week. Plenty more if desired. Compensation & Benefits Pay: $32–$36/hr. Benefits: Medical, dental, vision, 401K. 22 days PTO (with floating holidays, accrual-based). 8 recognized holidays. Job Details Job Description SUMMARY The Maintenance Technician II is responsible for performing skilled maintenance and repair work on complex mechanical, electrical, HVAC, and facility systems. This includes troubleshooting and repairing equipment in compliance with standard operating procedures, safety policies, manufacturer specifications, and company requirements. The role also manages spare parts inventory, recommends tools and supply purchases, and supports efficiency improvements within the facility. Additionally, this position provides guidance and oversight for less experienced technicians. ACCOUNTABILITIES Identify, troubleshoot, and resolve mechanical or electrical safety issues. Evaluate equipment and facility needs, recommend solutions, and implement corrective actions to reduce downtime and improve overall efficiency. Maintain purchasing and inventory controls for spare parts, tools, and supplies. Support installations, equipment startups, and ongoing facility projects. Assist with daily and weekly operational support for assets and equipment. Participate in training warehouse and operations personnel as needed. Contribute to special projects and continuous improvement initiatives directed by management. Plan and carry out corrective, preventive, and predictive maintenance activities. EXPERIENCE 3–5 years of experience in industrial or facility maintenance, including work with high-volume conveying systems. 3+ years of experience with PLCs and advanced electrical troubleshooting/repair. Hands-on experience with motors, electrical controls, water systems, large washers, and high-volume operations. Background in welding, pipe installation/repair, and boiler/heating systems. Prior experience performing general facility maintenance such as doors, forklifts, and office infrastructure. SKILLS Strong mechanical and electrical troubleshooting skills. Proficiency with PLC programming and repair. Ability to support and maintain high-volume material handling and conveying systems. Experience with fabrication and facility repair work (welding, piping, heating/boiler systems). Familiarity with maintenance best practices, including preventive and predictive maintenance methods. Ability to mentor and support junior technicians while working in a fast-paced environment. WORK ENVIRONMENT & PHYSICAL DEMANDS Manufacturing or warehouse environment with moderate to high activity levels. Frequent standing, walking, bending, and reaching required. Regular lifting of up to 50 lbs, with occasional lifting up to 80 lbs. Exposure to noise, heat, and moving equipment is common. Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

Global Market and Technology Leader seeking a Traveling Service Technician This Jobot Job is hosted by: Amber Wood Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $26 - $40 per hour A bit about us: Worldwide market and technology leader for metal sawing machines, long material and sheet metal storage systems. Why join us? • Ever changing tasks and environments, creates a interesting and challenging environment, • Tools, communication devices and vehicle supplied as needed, • Performance-driven and competitive pay Job Details Will be responsible for TRAVELING locally to client sites to repair industrial equipment. • Responsible for installations, maintenance and troubleshooting of automated storage and retrieval systems as well as sawing equipment, • Performing the above tasks in a safe and craftsman-like manner., • Work on electrical system, low and high voltage 24V to 480V, • Troubleshoot, change and install electrical components, motors, drives, HMI, PLCs as well as sensors and electronic actors n Inspect, replace and install mechanical components like chains, sprockets, bearings and shafts., • Inspect, change and rebuild hydraulic components from hoses to valves and pumps or motors. Perform daily/weekly inspections as assigned by site supervisor. Perform daily/weekly inspections as assigned by the site supervisor. systems and be familiar with lockout/tagout procedures. Must be familiar with working safely around high and low-voltage systems and be familiar with lockout/tagout procedures. Maintain a clean and safe work environment and maintain clean and effective tools. routine maintenance as assigned by the site supervisor. as assigned by the site supervisor. Clean and lubricate vehicles, machinery and components to ensure safe and efficient operation. Must be able to communicate, on the forms provided, the required documentation for repairs and maintenance performed. Examine parts, checking for breakage, excessive wear, or other damage, and completing routine maintenance as assigned by site supervisor. complete repairs. estimated time frame to complete repairs. Determine parts and materials needed and requisition from the site supervisor. Plan and lay out repair work using diagrams, drawings, blueprints, maintenance manuals and schematic diagrams. Disassemble broken or defective equipment to facilitate repair; reassemble equipment when repairs are complete. Position vehicles, equipment, physical structures and other objects for assembly or installation, using hand tools, power tools, and moving equipment. Transfer tools, parts, equipment, and supplies to and from workstations and other warehouse areas. Safely adjust, connect or disconnect wiring, piping, tubing and other parts. Safely connect wire to motors, fixtures, and other electrical equipment, replacing switches and fuses, and splicing wire as necessary. Locate damaged air and hydraulic pipes or hoses on machines for repair. Install and repair electronic components of equipment as necessary. Repair, adjust and replace gauges, valves and other regulating equipment. Adjust, align and balance equipment as necessary. Test machines after repair. Use tools ranging from common hand and power tools, such as hammers, hoists, saws, drills, and wrenches to precision measuring instruments and electrical and electronic testing devices, grinders, welding and soldering equipment. Inspect, repair and replace motors as necessary for material handling systems, material moving equipment and sawing machinery. Weld machinery parts. Fabricate and weld brackets, supports, other necessary devices. Use programming devices for fault tracking and parameterization of electrical control devices such as PLC’s and operating devices. Use specialized tools such as databus testing devices and other diagnostic devices as necessary. Participate in all quality, safety training and job certification requirements for this position. Comply with all company policies and procedures. Perform any additional duties that may be assigned, such as visiting other customer sites. Maintain a good attitude and maintain positive customer relations. Requirements High School Diploma/GED and 1 year technical school, or 4 years on the job training in an industrial maintenance environment. Must be able to use multi-meter for electrical troubleshooting, power tools for mechanical repairs, programmable logic controller for troubleshooting. Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals Ability to write routine reports and correspondence Ability to speak effectively before groups of customers or employees of the organization Ability to add, subtract, multiply, and divide into all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rates, ratios, and percentages, and to draw and interpret bar graphs. Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables. Must have a valid driver’s license and an acceptable driving record. Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

Job Description IMMEDIATE HIRING!!! Job Title: Cleanroom Production Operator- $17.75/HR. Job Description Join our dynamic team in the cartridge department as a Cleanroom Production Operator. You will work in a cleanroom setting, assembling cartridges, monitoring manufacturing processes, and ensuring quality and safety standards are met. Responsibilities • Assemble cartridges in a cleanroom environment., • Collaborate with a team on a manufacturing line to complete assemblies., • Monitor semi-automated manufacturing processes., • Work across four different lines: inspections, operating automated machines, sub-assembly/welding, and testing., • Review batch records and ensure documentation accuracy., • Ability to follow work instructions and standard operating procedures (SOPs)., • Proficiency in computer use for training and documentation., • Attention to detail and reliability., • Experience in mechanical assembly and medical device production., • Familiarity with inspection, GMP standards, and packaging., • Previous experience in a fast-paced environment is highly desirable. Be part of a great team culture where everyone cares for each other. Work in a large company with a family-like team, where respect is given to all employees, whether full-time or contract. Take pride in being part of a team that values respect and teamwork. Work Environment The position is based in the cartridge department, with potential work across other departments as needed. Work in an ISO Class 8 cleanroom, adhering to specific dress codes including cleanroom PPE, no fragrances, and no makeup. Flexibility is essential, as work locations may vary between buildings approximately 2.5 miles apart. Shifts run from 4:00 AM to 2:30 PM, Monday to Thursday. Job Type & Location This is a Contract position based out of San Diego, CA. Pay and Benefits The pay range for this position is $17.75 - $17.75/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description Job Title: Production Operator- $17.75/HR. ENTRY LEVEL - No experience required! Job Description Join our dynamic team in the cartridge department as a Cleanroom Production Operator. You will work in a cleanroom setting, assembling cartridges, monitoring manufacturing processes, and ensuring quality and safety standards are met. Responsibilities • Assemble cartridges in a cleanroom environment., • Collaborate with a team on a manufacturing line to complete assemblies., • Monitor semi-automated manufacturing processes., • Work across four different lines: inspections, operating automated machines, sub-assembly/welding, and testing., • Review batch records and ensure documentation accuracy., • Ability to follow work instructions and standard operating procedures (SOPs)., • Proficiency in computer use for training and documentation., • Attention to detail and reliability., • Experience in mechanical assembly and medical device production., • Familiarity with inspection, GMP standards, and packaging., • Previous experience in a fast-paced environment is highly desirable. Be part of a great team culture where everyone cares for each other. Work in a large company with a family-like team, where respect is given to all employees, whether full-time or contract. Take pride in being part of a team that values respect and teamwork. Work Environment The position is based in the cartridge department, with potential work across other departments as needed. Work in an ISO Class 8 cleanroom, adhering to specific dress codes including cleanroom PPE, no fragrances, and no makeup. Flexibility is essential, as work locations may vary between buildings approximately 2.5 miles apart. Shifts run from 4:00 AM to 2:30 PM, Monday to Thursday. Job Type & Location This is a Contract position based out of San Diego, CA. Pay and Benefits The pay range for this position is $17.75 - $17.75/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

About VetPowered: VetPowered, LLC, named Veteran Owned Small Business of the Year in the United States is a rapidly growing San Diego based corporation specializing in manufacturing, welding, fabrication, machinery repair and customized training under private and US Government contracts. VetPowered employs a highly trained workforce that uses the latest in cutting edge CNC equipment. VetPowered is dedicated to bringing advanced manufacturing back to America. Key Job Functions: At VetPowered, the Senior Quality Inspector will play a critical role in ensuring that manufactured components and assemblies meet customer specifications, aerospace quality standards, and internal inspection requirements. This role will perform detailed inspections of machined parts and assemblies, support first article inspections, and help maintain quality documentation in accordance with AS9100 standards. Essential Duties and Responsibilities: Inspection and Verification • Perform detailed inspections of machined components, assemblies, and fabricated parts using precision measuring tools., • Interpret engineering drawings, GD&T callouts, blueprints, and specifications to verify dimensional accuracy and compliance., • Coordinate and perform first article inspections (FAI) in accordance with AS9102 standards., • Utilize precision measuring equipment such as calipers, micrometers, height gauges, bore gauges, and coordinate measuring machines (CMM)., • Maintain accurate inspection records and documentation for internal quality systems., • Document non-conforming materials and communicate findings to production and quality leadership., • Work closely with machinists and manufacturing teams to resolve quality issues and improve product quality., • Identify trends in inspection results and support root cause investigations for quality issues. Qualifications & Work Experience: To perform this job successfully, the candidate must be able to perform each essential duty satisfactorily (with or without an accommodation). The requirements listed below are representative of the knowledge, skill, and/or ability required. \n\n • High school diploma or equivalent required. Technical certification or associate degree in manufacturing, machining, or quality assurance preferred.\n, • Minimum of 5+ years of experience in quality inspection within a manufacturing or aerospace environment.\n\n, • Strong understanding of blueprint reading and geometric dimensioning and tolerancing (GD&T).\n, • Experience conducting first article inspections and familiarity with AS9102 documentation requirements.\n\n, • Experience working within AS9100 quality systems preferred.\n\n, • Experience with CMM inspection equipment (Zeiss preferred) is highly desirable.\n, • Strong attention to detail and analytical problem-solving skills.\n, • Ability to work independently and prioritize multiple inspection tasks.\n, • Experience using UniPoint and JobBoss (a plus).\n\n, • \nAttention to Detail- The ability to accomplish a task while demonstrating a thorough concern for all the areas involved, no matter how small. \n, • \nAll In-Brings their whole self to work and giving it their all no matter how difficult the job or situation. \n, • \nAccountable- Taking personal responsibility for their work, owns mistakes, communicate honestly rather than hiding the truth, does not blame others or make excuses. \n, • \nAdaptable- Easily adjusts to changing circumstances. \n, • \nAlways Improving- A constant, ongoing effort to improve something. This 'something' can be a product, a service, one's skill set, or a team's way of working. \n\n Important Notes Position Details: This is a full-time salary (exempt) position (40+ hours/week). Schedule: This position is Monday-Friday, 7:00am-3:30pm. Occasional weekends, and shift changes may be necessary from time to time in order to support Company goals and production needs. Pay: This pay does not include any opportunity for incentive compensation and is only reflective of the base pay for this position. The range of pay for this California-based position is $78,000.00 - $88,000.00 annually. Incentive Compensation: Potential for bonus/incentives after one full year of employment. Benefits and Perks: VetPowered makes available comprehensive benefits the 1st of the month, following the date of hire. Options include Medical (50% employer contribution), dental and vision coverage (100% employer contribution), a 401k program with employer match up to $1,000 per year, 8 paid holidays, and paid time off. Dress code: Position is provided VetPowered uniforms, and laundry service. Physical Requirements: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk or hear. The employee frequently is required to stand; sit; walk; use hands to finger, handle or feel; and reach with hands and arms. The employee is regularly required to push, move, lift or otherwise bear 10-30lbs. Applications may include but are not limited to repetitive work using a computer keyboard, mouse and headphones while sitting and/or standing at an assigned work desk area. Work Environment: The employee works in a contract manufacturing facility in an urban industrial neighborhood. Other areas within the facility are mixed use such as administration, classrooms, welding, and machining areas. Employee may have additional environmental hazards such as: chemical, electrical, flammable, or mechanical in nature.

Job Description Entry Level Manufacturing Worker - 1st Shift/2nd Shift - Sorrento Valley Job Description Join our dynamic team in the cartridge department as a Cleanroom Production Operator. You will work in a cleanroom setting, assembling cartridges, monitoring manufacturing processes, and ensuring quality and safety standards are met. Responsibilities • Assemble cartridges in a cleanroom environment., • Collaborate with a team on a manufacturing line to complete assemblies., • Monitor semi-automated manufacturing processes., • Work across four different lines: inspections, operating automated machines, sub-assembly/welding, and testing., • Review batch records and ensure documentation accuracy., • Ability to follow work instructions and standard operating procedures (SOPs)., • Proficiency in computer use for training and documentation., • Attention to detail and reliability., • Experience in mechanical assembly and medical device production., • Familiarity with inspection, GMP standards, and packaging., • Previous experience in a fast-paced environment is highly desirable. Be part of a great team culture where everyone cares for each other. Work in a large company with a family-like team, where respect is given to all employees, whether full-time or contract. Take pride in being part of a team that values respect and teamwork. Work Environment The position is based in the cartridge department, with potential work across other departments as needed. Work in an ISO Class 8 cleanroom, adhering to specific dress codes including cleanroom PPE, no fragrances, and no makeup. Flexibility is essential, as work locations may vary between buildings approximately 2.5 miles apart. Shifts run from 4:00 AM to 2:30 PM, Monday to Thursday. Job Type & Location This is a Contract position based out of San Diego, CA. Pay and Benefits The pay range for this position is $17.75 - $17.75/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

La Jolla 9500 Gilman Drive, San Diego, CA 92037, United States Extended Deadline: Wed 4/22/2026 ___ UC San Diego values and welcomes people from all backgrounds. If you are interested in being part of our team, possess the needed licensure and certifications, and feel that you have most of the qualifications and/or transferable skills for a job opening, we strongly encourage you to apply. UCSD Layoff from Career Appointment: Apply by 10/24/25 for consideration with preference for rehire. All layoff applicants should contact their Employment Advisor. Reassignment Applicants: Eligible Reassignment clients should contact their Disability Counselor for assistance. Job posting will remain open until a suitable candidate has been accepted. Under general direction, the incumbent supervises mechanical work which requires top machinist's skills in order to provide technical support for development, research and manufacturing. The incumbent instructs and assists students in the design and fabrication of their quarter-long projects using comprehensive knowledge of separate machining characteristics of a wide variety of materials, shop practices and machining principles. Provides training and assists in machine programming using CAD/CAM software, for students, researchers shop staff and Principal Investigators (PI). Independently troubleshoots, maintains shop machinery, and manages workflow by assigning shop personnel and machines for most efficient completion of given tasks. * Bachelor's degree and or relevant experience is preferred. * Proven high level machinist skills, including the skill to safely set up, operate, and perform maintenance on standard machine shop equipment such as lathes, milling machines, CNC equipment, grinders, band saws, brakes, and drill presses. * Demonstrated skill to perform machining work to close tolerances on a range of shapes and angles. * Thorough knowledge of relevant safety practices, plus the ability and willingness to comply with those practices. Proper hazardous waste handling and disposal * Proven ability to use originality and ingenuity to solve problems. * Comprehensive knowledge of shop practices and machining principles. * Comprehensive knowledge of all Cad/Cam software that is used in the lab and its machine interface. * Demonstrated skill to estimate the costs and time involved in the design and completion of work requested. * Demonstrated skill to design and fabricate high-quality finished products in materials such as aluminum, plastics, ceramics, copper, stainless steel, carbide and brass. * Experience in welding TIG, MIG, stick, laser welding. * Knowledge of weldability of various materials * Demonstrated skill to accurately perform mathematical calculations relevant to machine shop work. May include converting between metric and imperial measurements, calculating volumes and/or weights, etc. * Excellent interpersonal and communication skills, including the ability to interact, in a clear and concise manner, successfully with individuals from a variety of cultural backgrounds and with non-native speakers of English. * Excellent interpersonal skills with the ability to interact effectively with faculty, students and staff. * May be required to work evenings and weekends. * Background check required. Pay Transparency Act Annual Full Pay Range: $83,604 - $100,892 (will be prorated if the appointment percentage is less than 100%) Hourly Equivalent: $40.04 - $48.32 Factors in determining the appropriate compensation for a role include experience, skills, knowledge, abilities, education, licensure and certifications, and other business and organizational needs. The Hiring Pay Scale referenced in the job posting is the budgeted salary or hourly range that the University reasonably expects to pay for this position. The Annual Full Pay Range may be broader than what the University anticipates to pay for this position, based on internal equity, budget, and collective bargaining agreements (when applicable). If employed by the University of California, you will be required to comply with our Policy on Vaccination Programs, which may be amended or revised from time to time. Federal, state, or local public health directives may impose additional requirements. To foster the best possible working and learning environment, UC San Diego strives to cultivate a rich and diverse environment, inclusive and supportive of all students, faculty, staff and visitors. For more information, please visit ___. The University of California is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, protected veteran status, or other protected status under state or federal law. For the University of California's Anti-Discrimination Policy, please visit: ___ UC San Diego is a smoke and tobacco free environment. Please visit ___ for more information. Misconduct Disclosure Requirement: As a condition of employment, the final candidate who accepts an offer of employment will be required to disclose if they have been subject to any final administrative or judicial decisions within the last seven years determining that they committed any misconduct; or have filed an appeal of a finding of substantiated misconduct with a previous employer. a. "Misconduct" means any violation of the policies governing employee conduct at the applicant's previous place of employment, including, but not limited to, violations of policies prohibiting sexual harassment, sexual assault, or other forms of harassment, or discrimination, as defined by the employer. For reference, below are UC's policies addressing some forms of misconduct:

Merchandising Sales Associate $16.75 $16.75 hourly Overall Job Summary The High Volume FAST Team Member is responsible for working as part of the Field Activity Support Team (FAST), primarily in a single store, to own and execute "start to finish" variable tasks such as planograms, signage, price changes and physical inventories, as well as provide support for other tasks including merchandise and fixture assembly, and the maintenance of all signage. The High Volume FAST Team Member will interact with customers and team members, while delivering a Legendary Customer Experience. Do you love the life out here and want to share it with others? At Tractor Supply we strive to make the life out here a little bit better each day for both our neighbors and our teams. Essential Duties and Responsibilities (Min 5%) As a High Volume FAST Team Member, it is essential that you be available, flexible, adaptable and service-oriented, as you must be able to fulfill all of the following requirements: * Maintain regular and predictable attendance. * Work scheduled shifts Monday thru Thursday unless otherwise dictated by business needs. * Communicate proactively and regularly with District FAST Supervisor on work completion, issues, and offer solutions to overcome. * Complete planograms and resets accurately and in a timely manner. * Maintain visual merchandise standards. * Perform store specific measurements. * Complete store layout initiatives. * Perform accurate counts for store inventories, as well as cycle counts. * Complete Tractor Way top cap process. * Complete store price changes accurately and in a timely manner. * Hang store signage including, but not limited to, Circulars, Price Cuts and Managers' Specials. * Assemble merchandise, fixtures and PDQs. * Perform detailed recovery and review planogram integrity. * Deliver on our promise of Legendary Customer Service through GURA: * Greet the Customer. * Uncover Customer's Needs & Wants. * Recommend Product Solutions. * Ask to Add Value & Appreciate the Customer. * Ensure the customer has a Legendary shopping experience that differentiates from the competition. * Provide peak coverage as needed (e.g., DAT). * High Volume FAST Team Members also may be required to perform other duties as assigned. Required Qualifications Experience: Prior retail and/or merchandising experience is required. Farming, ranching, pet/equine, or welding knowledge is preferred. Must be 18 years of age or older. Education: A high school diploma or equivalent is preferred, but not required. Regardless of education level, High Volume FAST Team Members must be able to read, write and count accurately. Preferred knowledge, skills or abilities * Farming, ranching, pet/equine, or welding knowledge is strongly preferred. * Strong communication and problem-solving skills. * Basic computer skills. * Strong interpersonal skills and ability to resolve issues ethically and with minimal conflict. * Must be self-directed and have the ability to complete assignments with little to no assistance. Working Conditions * Working environment is favorable, generally working inside with moderate noise. * Indoor floors and outdoor lots generally are hard surfaces (concrete, asphalt, etc.) lighting and temperature are adequate. * Work shifts vary from one store to another, but generally are no less than 4 hours and may exceed 8 hours * Promote a safe and productive work environment for Team Members and customers and adhere to Company safety training and guidelines Physical Requirements * Ability to move and transfer merchandise, weighing up to 50 pounds, throughout the store. * Ability to push and pull merchandise up to 2,000 pounds with the assistance of proper material handling equipment (e.g. pallet jack). * Ability to occasionally lift or reach merchandise overhead. * Ability to frequently stand, kneel, twist, crouch, squat, bend, stoop, and climb ladders. * Ability to move throughout the store for an entire shift. * Ability to read, write, and count accurately to complete all documentation. * Ability to utilize strong written and verbal communication skills to communicate effectively with team members and customers. * Ability to handle and be in contact with birds/poultry. * Ability to successfully complete all required training. * Sitting * Standing (not walking) * Walking * Kneeling/Stooping/Bending * Reaching overhead * Lifting up to 50 pounds * It is essential that Team Members have the physical and mental stamina and ability to move throughout the store and outdoor areas quickly and safely. * It is essential to operate all equipment related to their job duties efficiently, safely, properly and accurately; and to provide the highest level of customer service. Disclaimer This job description represents an overview of the responsibilities for the above referenced position. It is not intended to represent a comprehensive list of responsibilities. A team member should perform all duties as assigned by his/ her supervisor. Company Info At Tractor Supply and Petsense by Tractor Supply, our Team Members are the heart of our success. Their dedication, passion, and hard work drive everything we do, and we are committed to supporting them with a comprehensive and accessible total reward package. We understand the evolving needs of our Team Members and their families, and we strive to offer meaningful, competitive, and sustainable benefits that support their well-being today and in the future. Our benefits extend beyond medical, dental, and vision coverage, including company-paid life and disability insurance, paid parental leave, tuition reimbursement, and family planning resources such as adoption and surrogacy assistance, for all full-time Team Members and all part-time Team Members. Part time new hires gain eligibility for TSC Benefits by averaging at least 15 hours per week during their 90-day lookback period. The lookback period starts the first of the month following the date of hire. If the 15-hour requirement was met, the benefits eligibility date will be the first day of the month following 4 months of continuous service. Please visitthis link () for more specific information about the benefits and leave policies applicable to the position you're applying for. ALREADY A TEAM MEMBER? You must apply or refer a friend through our internal portal Click here () CONNECTION Our Mission and Values are more than just words on the wall - they're the one constant in an ever-changing environment and the bedrock on which we build our culture. They're the core of who we are and the foundation of every decision we make. It's not just what we do that sets us apart, but how we do it. Learn More EMPOWERMENT We believe in managing your time for business and personal success, which is why we empower our Team Members to lead balanced lives through our benefits and total rewards offerings. For full-time and eligible part-time TSC and Petsense Team Members. We care about what you care about! Learn More OPPORTUNITY A lot of care goes into providing legendary service at Tractor Supply Company, which is why our Team Members are our top priority. Want a career with a clear path for growth? Your Opportunity is Out Here at Tractor Supply and Petsense. Learn More Join Our Talent Community Nearest Major Market: San Diego

Global Market and Technology Leader seeking a Traveling Service Technician This Jobot Job is hosted by: Amber Wood Are you a fit? Easy Apply now by clicking the "Apply" buttonand sending us your resume. Salary: $26 - $40 per hour A bit about us: Worldwide market and technology leader for metal sawing machines, long material and sheet metal storage systems. Why join us? • Ever changing tasks and environments, creates a interesting and challenging environment, • Tools, communication devices and vehicle supplied as needed, • Performance-driven and competitive pay Will be responsible for TRAVELING locally to client sites to repair industrial equipment. • Responsible for installations, maintenance and troubleshooting of automated storage and retrieval systems as well as sawing equipment, • Performing the above tasks in a safe and craftsman-like manner., • Work on electrical system, low and high voltage 24V to 480V, • Troubleshoot, change and install electrical components, motors, drives, HMI, PLCs as well as sensors and electronic actors n Inspect, replace and install mechanical components like chains, sprockets, bearings and shafts., • Inspect, change and rebuild hydraulic components from hoses to valves and pumps or motors. Perform daily/weekly inspections as assigned by site supervisor. Perform daily/weekly inspections as assigned by the site supervisor. systems and be familiar with lockout/tagout procedures. Must be familiar with working safely around high and low-voltage systems and be familiar with lockout/tagout procedures. Maintain a clean and safe work environment and maintain clean and effective tools. routine maintenance as assigned by the site supervisor. as assigned by the site supervisor. Clean and lubricate vehicles, machinery and components to ensure safe and efficient operation. Must be able to communicate, on the forms provided, the required documentation for repairs and maintenance performed. Examine parts, checking for breakage, excessive wear, or other damage, and completing routine maintenance as assigned by site supervisor. complete repairs. estimated time frame to complete repairs. Determine parts and materials needed and requisition from the site supervisor. Plan and lay out repair work using diagrams, drawings, blueprints, maintenance manuals and schematic diagrams. Disassemble broken or defective equipment to facilitate repair; reassemble equipment when repairs are complete. Position vehicles, equipment, physical structures and other objects for assembly or installation, using hand tools, power tools, and moving equipment. Transfer tools, parts, equipment, and supplies to and from workstations and other warehouse areas. Safely adjust, connect or disconnect wiring, piping, tubing and other parts. Safely connect wire to motors, fixtures, and other electrical equipment, replacing switches and fuses, and splicing wire as necessary. Locate damaged air and hydraulic pipes or hoses on machines for repair. Install and repair electronic components of equipment as necessary. Repair, adjust and replace gauges, valves and other regulating equipment. Adjust, align and balance equipment as necessary. Test machines after repair. Use tools ranging from common hand and power tools, such as hammers, hoists, saws, drills, and wrenches to precision measuring instruments and electrical and electronic testing devices, grinders, welding and soldering equipment. Inspect, repair and replace motors as necessary for material handling systems, material moving equipment and sawing machinery. Weld machinery parts. Fabricate and weld brackets, supports, other necessary devices. Use programming devices for fault tracking and parameterization of electrical control devices such as PLC's and operating devices. Use specialized tools such as databus testing devices and other diagnostic devices as necessary. Participate in all quality, safety training and job certification requirements for this position. Comply with all company policies and procedures. Perform any additional duties that may be assigned, such as visiting other customer sites. Maintain a good attitude and maintain positive customer relations. Requirements High School Diploma/GED and 1 year technical school, or 4 years on the job training in an industrial maintenance environment. Must be able to use multi-meter for electrical troubleshooting, power tools for mechanical repairs, programmable logic controller for troubleshooting. Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals Ability to write routine reports and correspondence Ability to speak effectively before groups of customers or employees of the organization Ability to add, subtract, multiply, and divide into all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rates, ratios, and percentages, and to draw and interpret bar graphs. Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables. Must have a valid driver's license and an acceptable driving record. Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot's policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

Start Your Civilian Career with a Global Leader in Dairy Manufacturing Locations: • Greeley, CO, • Lemoore, CA, • Fort Morgan, CO, • Allendale, MI Leprino is offering transitioning service members the opportunity to gain hands-on experience in industrial maintenance through our DoD SkillBridge Maintenance Technician Trainee Program. This 4-6 month program provides immersive, on-the-job training in one of the world’s leading dairy foods manufacturing companies, setting you up for a seamless transition into a high-demand civilian career. At Leprino, we pride ourselves on innovation, teamwork, and a strong commitment to excellence. As the largest producer of mozzarella cheese and a global leader in dairy ingredients, we understand the value of highly skilled technical professionals. This program is designed to bridge your military expertise into a thriving career in industrial maintenance. What You’ll Learn & Do As a Maintenance Technician Trainee, you’ll be working alongside seasoned maintenance professionals, gaining real-world experience in maintaining and troubleshooting advanced manufacturing equipment. Key Responsibilities: • Perform preventive maintenance on conveyors, motors, pumps, valves, and hydraulic systems., • Conduct vibration analysis and thermal imaging to predict equipment failures., • Work with lubrication systems to maintain production equipment., • Diagnose and repair mechanical, hydraulic, pneumatic, and electrical systems., • Troubleshoot three-phase motors, motor controls, and Variable Frequency Drives (VFDs)., • Work with steam boilers, refrigeration systems, and ammonia-based cooling systems., • Gain hands-on experience with Programmable Logic Controllers (PLCs) and Human-Machine Interfaces (HMIs)., • Assist in diagnosing automation system issues using SCADA and industrial networking., • Perform welding and fabrication for minor equipment repairs and modifications., • Enter maintenance data and track equipment history in SAP or another CMMS software., • Support installation, setup, and commissioning of new processing and packaging equipment., • Work on projects involving robotic automation and advanced processing technology., • Participate in Lean Manufacturing and Continuous Improvement (CI) initiatives to enhance equipment efficiency., • Follow OSHA safety standards, Lockout/Tagout (LOTO) procedures, and food safety (GMP, HACCP) protocols., • Learn arc flash safety and work in high-voltage environments safely and effectively. This is a structured training program with direct mentorship, on-the-job learning, and exposure to industry-leading maintenance practices that will set you up for long-term career success. Who We’re Looking For Military service members eligible for the DoD SkillBridge Program (within 180 days of separation). Experience in the following military maintenance roles: • Army: 15-series MOS (Aviation Maintenance Technicians)., • Navy: Engineman (EN), Machinist’s Mate (MM), Electrician’s Mate (EM), Hull Maintenance Technician (HT), Gas Turbine Systems Technician (GS), Machinery Repairman (MR)., • Marines: 60/61/62 (Aircraft Maintenance)., • Air Force: Aircraft Maintenance (2A5X1, 2A3X3), HVAC/R (3E1X1)., • Coast Guard: Machinery Technician (MK), Electronics Technician (ET), Aviation Maintenance Technician (AMT), Electrician’s Mate (EM) Apply Today! Take the first step toward a rewarding civilian career. If you're a transitioning service member looking for a hands-on, high-paying career in industrial maintenance, we encourage you to apply! 📩 Contact: Iassen Donov – 🌐 Visit: ___ to learn more.

Job Description Join our fast-paced and passionate team as a Principal Photonics Process Development Engineer focused on advanced packaging and tooling. As we scale, you will be instrumental in building our manufacturing foundation from the ground up. This is a dynamic, hands-on role for a highly self-directed engineer who thrives in an ambiguous, fast-moving environment. You will play a critical role in establishing scalable photonic manufacturing processes that directly enable product performance, reliability, and cost targets. Your work will define how our technology transitions from prototype to production. You will collaborate closely with device, optical, electrical, mechanical, and manufacturing engineers to transform delicate photonic designs into robust, manufacturable, high-yield products. Impact: • Establish core assembly and packaging processes that enable company growth, • Define manufacturing strategies that scale from R&D to production, • Improve yield, reliability, and cost through process innovation and optimization, • Vacuum reflow soldering (AuSn, SAC, Indium, and related materials), • Wire bonding (Au and Al; ball and wedge), • Die bonding (epoxy, eutectic, and solder attach), • Optical assembly and active alignment (lenses, isolators, fiber arrays), • Fiber splicing and precision fiber handling (including PM alignment), • Hermetic sealing (laser welding, parallel seam sealing), • Adhesives and material characterization, • Process metrology and inspection (shear/pull testing, vision systems, interferometry, hermeticity testing), • Own end-to-end development of photonic assembly processes from concept through production release, • Define and execute the process development roadmap aligned with product and manufacturing goals, • Design statistically rigorous experiments (DOE) to optimize process windows, robustness, and yield, • Manage the process control limits, qualification criteria, and acceptance metrics, • Transition processes from R&D to pilot and full manufacturing scale, • Lead process transfer to production, including equipment qualification (IQ, OQ, PQ), • Drive yield improvement initiatives and root-cause investigations for failures and reliability issues, • Establish engineering standards, documentation, and best practices, • Develop process flows, work instructions, travelers, and training materials, • Determine appropriate Design for Manufacturability (DFM) principles and ensures tolerance analysis follows best practices, • Manages the improvement of process capability (Cp/Cpk), • Performs qualification, reliability testing, and failure analysis (including FMEA), • Design precision fixtures, tooling, and mechanisms to enable repeatable assembly and alignment, • Collaborate with mechanical engineers and equipment vendors to develop manufacturable solutions and automation, • Mentor junior engineers and technicians and provide technical leadership across cross-functional teams, • Ensure adherence to cleanroom protocols and contamination control practices, • BS or MS in Optical Engineering, Electrical Engineering, Materials Science, Mechanical Engineering, Physics, or a related field, • Typically 8+ years of relevant experience in photonics or optoelectronic process development, • Experience with laser diodes, PICs, modulators, detectors, or optical transceivers, • Familiarity with hermetic packaging (butterfly, TO, or micro-optical packages), • Experience with active alignment systems, • Reliability testing experience (thermal cycling, HTOL, damp heat), • Knowledge of statistical process control (SPC) and manufacturing metrics, • Experience supporting low- to medium-volume production environments, • Comfortable operating in an evolving environment with changing priorities, • Motivated by building new capabilities and infrastructure from the ground up, • Willing to take ownership across multiple technical domains, • Hands-on and resourceful, with a strong bias toward execution Benefits The expected annual salary range for this position is $150,000-$200,000. As a full-time employee, you will be eligible for Monarch’s comprehensive benefits package, which includes: • Medical, Dental, and Vision insurance, • Fidelity 401(k) plan with 4% employer matching, • 20 paid time off (PTO) days per year, • 13 paid company holidays, • 9/80 work schedule (every other Friday off) Monarch Quantum is proud to be an equal opportunity employer and does not discriminate on the basis of race, color, citizenship status, national origin, ancestry, sex, sexual orientation, age, religion, creed, physical or mental disability, medical condition, marital status, veteran status or any other characteristics protected under applicable federal, state and local laws.

Job DescriptionBefore applying to this job opening, please review the Company's Applicant Privacy Policy located at: This Applicant Privacy Policy governs the Company's collection, use, and sharing of personal information you provide during the application process. Body Shop Technician II - Kearny Mesa Chevrolet Non-Exempt Job Summary: A Collision Body Technician is responsible for repairing and restoring vehicles that have been involved in accidents or collisions. This role involves assessing vehicle damage, performing necessary repairs, and ensuring that all work meets quality standards and safety regulations. Essential Functions: • Inspect and assess vehicles for collision damage, identifying areas requiring repair or replacement., • Review repair orders and damage reports to determine necessary work., • Perform structural and non-structural body repairs using a variety of tools and techniques., • Remove and replace damaged parts, such as bumpers, fenders, and panels., • Use welding equipment to repair or replace metal components., • Utilize frame-straightening equipment to repair and align vehicle frames and unibody structures., • Measure and diagnose frame and alignment issues to ensure proper repair., • Inspect completed repairs to ensure they meet quality standards and manufacturer specifications., • Perform final vehicle checks to ensure proper functionality of repaired parts and systems., • Test drive repaired vehicles to ensure that everything is functioning properly. Communicate with service advisors and customers regarding repair progress and any additional findings., • Provide recommendations for additional repairs or maintenance if needed., • Follow all safety protocols and procedures to ensure a safe working environment., • Maintain a clean and organized work area, including tools and equipment., • Document repair work, including parts used, labor hours, and repair procedures., • Update repair orders and records as required., • Maintain satisfactory attendance. Minimum Qualifications: • Minimum of two (2) years of experience as a collision center body technician or similar role., • Valid driver’s license and safe driving record; required to have California driver's license within 30 days following date of hire., • Ability to regularly lift 30 pounds., • Proficient with computer diagnostic equipment and software., • Certifications from Inter-Industry Conference on Auto Collision Repair (ICAR) or Automotive, • Service Excellence (ASE)., • Completion of technical training or certification in collision repair., • Proficiency in using collision repair tools and equipment., • Strong knowledge of automotive body repair techniques and materials., • Ability to read and interpret repair manuals, diagrams, and technical documentation., • Excellent problem-solving skills and attention to detail., • Strong communication and interpersonal skills., • Must be very detail oriented and have an interest in automotive repair and technology., • Must have a solid knowledge base of the many functions required in repairing damaged body parts and vehicle bodies. Should be able to interpret vendor products and catalogs., • Regularly stands, walks, sits; uses hands; reaches with hands and arms; talks and hears. Occasionally climbs or balances; bend, stretch, stoops, kneels, crouches, squats or crawls to perform repairs and inspections; must lift up to 30 pounds and occasionally lift up to 50 pounds., • Must be able to bend, stretch, kneel, and squat to perform repairs and inspections., • Manual dexterity to handle tools and small parts., • Ability to work in a fast-paced environment and meet deadlines., • Must be able to work in tight spaces., • Work in well-ventilated and well-lit repair shop., • Exposure to hazardous conditions and equipment that may result in minor injuries., • Use of personal protective equipment (PPE) like gloves, safety glasses, and steel-toed boots may be required to ensure safety while handling parts and equipment., • Work both indoors and outdoors., • Noise level is moderate to loud. Employee Benefits Include: • Medical Insurance, • Dental Insurance, • Vision Insurance, • Employer Paid Life Insurance, • Employer Paid AD&D, • 401k (with Employer match), • Vacation Package, • Tenure recognition and awards, • Vehicle Purchase Discount Program, • Vehicle Service Discount Program, • Golf Benefits at Maderas Golf Club (subject to qualification) If you receive an offer of employment, it will be a conditional offer contingent on the successful completion of a pre-employment drug screen and background check. Sunroad is committed to providing reasonable accommodations to qualified individuals with disabilities to ensure equal employment opportunities and access to all programs, services, and activities. If you require accommodations to participate in the application process or to perform the essential functions of the job, please contact the HR Department to discuss your needs confidentially. We will work with you to identify appropriate accommodations based on your specific circumstances and in compliance with applicable laws. We are an Equal Opportunity Employer (M/F/D/V) and maintain a drug-free workplace. If you receive an offer of employment, it will be a conditional offer contingent on the successful completion of a pre-employment drug screen and background check. Sunroad is an Equal Employment opportunity and Affirmative Action Employer. We are committed to providing equal opportunity in all of our employment practices, including selection, race (including traits historically associated with race such as hair texture and protective hairstyles such as braids, locks, and twists); religion; religious creed; religious dress/grooming; color; age (40 and over); sex; sexual orientation; gender; gender identity (meaning a person’s identification as male, female, a gender different from the person’s sex at birth, or transgender); gender expression (including a person’s gender-related appearance or behavior, whether or not stereotypically associated with the person’s sex at birth); national origin; ancestry; citizenship status; uniform service member status; military or veteran status; marital status; pregnancy; childbirth; medical conditions related to pregnancy, childbirth, or breast feeding; medical condition (including cancer related or HIV/AIDS related); handicap; physical disability; mental disability; genetic characteristics; genetic information; or any other protected status in accordance with the requirements of all federal, state and local laws. Our Equal Employment Opportunity Policy applies equally to interns and volunteers. Company DescriptionFounded in 1977, Sunroad Enterprises is a diversified holding company based in San Diego. Sunroad consists of three distinct divisions: Automotive, Real Estate and Maderas Golf. With successful ventures across multiple countries, we bring a strategic focus to seeing developments come to life. Sunroad Enterprises is one of the largest minority-owned businesses in San Diego and has earned numerous quality commendations from local, regional, and national organizations. Please visit our website to learn more about our endeavors and career opportunities: in 1977, Sunroad Enterprises is a diversified holding company based in San Diego. Sunroad consists of three distinct divisions: Automotive, Real Estate and Maderas Golf. With successful ventures across multiple countries, we bring a strategic focus to seeing developments come to life. Sunroad Enterprises is one of the largest minority-owned businesses in San Diego and has earned numerous quality commendations from local, regional, and national organizations. Please visit our website to learn more about our endeavors and career opportunities:

Job Description Join our fast-paced and passionate team as a Senior Photonics Process Development Engineer focused on advanced packaging and tooling. As we scale, you will be instrumental in building our manufacturing foundation from the ground up. This is a dynamic, hands-on role for a highly self-directed engineer who thrives in an ambiguous, fast-moving environment. You will play a critical role in establishing scalable photonic manufacturing processes that directly enable product performance, reliability, and cost targets. Your work will contribute to how our technology transitions from prototype to production. You will collaborate closely with device, optical, electrical, mechanical, and manufacturing engineers to transform delicate photonic designs into robust, manufacturable, high-yield products. Impact: • Determine core assembly and packaging processes that enable company growth, • Create manufacturing strategies that scale from R&D to production, • Improve yield, reliability, and cost through process innovation and optimization, • Vacuum reflow soldering (AuSn, SAC, Indium, and related materials), • Wire bonding (Au and Al; ball and wedge), • Die bonding (epoxy, eutectic, and solder attach), • Optical assembly and active alignment (lenses, isolators, fiber arrays), • Fiber splicing and precision fiber handling (including PM alignment), • Hermetic sealing (laser welding, parallel seam sealing), • Adhesives and material characterization, • Process metrology and inspection (shear/pull testing, vision systems, interferometry, hermeticity testing), • Participates in end-to-end development of photonic assembly processes from concept through production release, • Create and execute the process development roadmap aligned with product and manufacturing goals, • Design statistically rigorous experiments (DOE) to optimize process windows, robustness, and yield, • Determine process control limits, qualification criteria, and acceptance metrics, • Transition processes from R&D to pilot and full manufacturing scale, • Process transfer to production, including equipment qualification (IQ, OQ, PQ), • Work on yield improvement initiatives and root-cause investigations for failures and reliability issues, • Participate in establishing engineering standards, documentation, and best practices, • Create process flows, work instructions, travelers, and training materials, • Apply Design for Manufacturability (DFM) principles and perform tolerance analysis, • Analyze and improve process capability (Cp/Cpk), • Support qualification, reliability testing, and failure analysis (including FMEA), • Perform precision fixtures, tooling, and mechanisms to enable repeatable assembly and alignment, • Collaborate with mechanical engineers and equipment vendors to develop manufacturable solutions and automation, • Ensure adherence to cleanroom protocols and contamination control practices, • BS or MS in Optical Engineering, Electrical Engineering, Materials Science, Mechanical Engineering, Physics, or a related field., • 5+ years of relevant experience in photonics or optoelectronic process development., • Experience with laser diodes, PICs, modulators, detectors, or optical transceivers, • Familiarity with hermetic packaging (butterfly, TO, or micro-optical packages), • Experience with active alignment systems, • Reliability testing experience (thermal cycling, HTOL, damp heat), • Knowledge of statistical process control (SPC) and manufacturing metrics, • Experience supporting low- to medium-volume production environments, • Comfortable operating in an evolving environment with changing priorities, • Motivated by building new capabilities and infrastructure from the ground up, • Willing to take ownership across multiple technical domains The expected annual salary range for this position is $125,000.00 to $175,000.00. As a full-time employee, you will be eligible for Monarch’s comprehensive benefits package, which includes: • Medical, Dental, and Vision insurance, • Fidelity 401(k) plan with 4% employer matching, • 20 paid time off (PTO) days per year, • 13 paid company holidays

Job DescriptionDescription: The Ascendancy Group’s Mission To be the unequaled provider of special operations forces (SOF) and Intelligence Community focused technical, service, and training-based solutions. Security Requirement: · A SECRET security clearance is required. Roles and Responsibilities: • Mechanics shall be capable of performing all levels of repairs on automotive, heavy truck and construction equipment both in the shop or field with no supervision., • Understand and follow all regulations related to safety, handling hazardous materials, and facility access., • Perform inspections, preventive maintenance, and repairs identified during initial inspections and as per the guidance recommended by the Original Equipment Manufacturer (OEM) and/or the NAVFAC P-300., • Conduct mandated 120 calendar day cycle for completing general maintenance and safety inspections on each piece of equipment., • Schedule all equipment for service every 120 calendar days or sooner in the event the vehicle accumulates high mileage within the normal service cycle., • Manage inventory list of equipment by Shop Location, Equipment Identification Number, Make, Model, Year, type of fuel and current mileage., • Pick up vehicles requiring service from a location designated by the Government’s Transportation Officer for each respective Shop Location., • Perform maintenance and repair to Government owned equipment with total numbers varying by +/-5% during the performance period., • Conduct scheduled maintenance in three specific levels identified as “A”, “B”, and “C” based on mileage or time. Standard vehicle safety inspections shall be completed as a specific task on every scheduled maintenance Shop Repair Order (SRO)., • Conduct direct liaison with the government to discuss access to equipment, maintenance schedules, and use of Government furnished equipment (GFE) if provided., • Perform welding, metal forming, sheet metal work, minor body, and fender repairs.?, • Must possess a valid state driver’s license from their state of residency to operate motor vehicles., • Have a minimum of six (6) years’ experience as an Original Equipment Manufacturer (OEM) mechanic at truck tractor dealership, commercial fleet service shop, intermediate level military maintenance facility, • OR have E6 – E7 military experience maintaining Civil Engineering Support Equipment., • Possess an Automotive Service Excellence (ASE) certification in diesel engines and at least two (2) other Heavy Truck Categories such as, Drive Train; Brakes; Suspension & Steering; Electrical; Heating & A/C and Preventative Maintenance., • Be able to use Asset Works LLC software “Fleet Focus” to record maintenance actions, track time and document parts ordered and installed., • Have the capacity and technical skills needed to make all levels of repair to suspension, steering, electrical, instrumentation, computer controls, driver controls, brakes, fuel delivery, carburetion and fuel injection, exhaust, and power train systems., • Be capable of repairing electric and manual window mechanisms, vehicle locks, seats, and incorporated electronics., • Be capable of demounting and mounting all sizes of tires and balancing the wheel and tire assembly once mounted. Tire repairs shall include plug insertion, patches, and complete replacement depending upon severity of damage. We are passionate about everything we do. One hundred percent of our government-focused teammates are former members of the Department of War or the Intelligence Community who still believe in supporting our nation. We offer like-minded individuals the opportunity to continue working in small teams on unique and challenging problem sets that further our nation's security. If you possess the experience, qualifications and drive required for this position, please APPLY NOW for consideration! Requirements:

Job DescriptionDescription: The Ascendancy Group’s Mission To be the unequaled provider of special operations forces (SOF) and Intelligence Community focused technical, service, and training-based solutions. Security Requirement: · A SECRET security clearance is required. Roles and Responsibilities: • Primary focus will be on expeditionary and tactical equipment with additional support to the automotive and heavy truck equipment based on operational priorities., • Mechanics shall be capable of performing all levels of repairs on automotive, heavy truck and construction equipment both in the shop or field with no supervision., • Understand and follow all regulations related to safety, handling hazardous materials, and facility access., • Perform inspections, preventive maintenance, and repairs identified during initial inspections and as per the guidance recommended by the Original Equipment Manufacturer (OEM) and/or the NAVFAC P-300., • Conduct mandated 120 calendar day cycle for completing general maintenance and safety inspections on each piece of equipment., • Schedule all equipment for service every 120 calendar days or sooner in the event the vehicle accumulates high mileage within the normal service cycle., • Manage inventory list of equipment by Shop Location, Equipment Identification Number, Make, Model, Year, type of fuel and current mileage., • Pick up vehicles requiring service from a location designated by the Government’s Transportation Officer for each respective Shop Location., • Perform maintenance and repair to Government owned equipment with total numbers varying by +/-5% during the performance period., • Conduct scheduled maintenance in three specific levels identified as “A”, “B”, and “C” based on mileage or time. Standard vehicle safety inspections shall be completed as a specific task on every scheduled maintenance Shop Repair Order (SRO)., • Conduct direct liaison with the government to discuss access to equipment, maintenance schedules, and use of Government furnished equipment (GFE) if provided., • Perform welding, metal forming, sheet metal work, minor body, and fender repairs.?, • Must possess a valid state driver’s license from their state of residency to operate motor vehicles., • Have a minimum of five(5) years’ experience at an Intermediate or depot level military maintenance facility, or have E6 – E7 equivalent military experience maintaining Civil Engineering Support Equipment., • Possess an Automotive Service Excellence (ASE) certification in diesel engines and at least one (1) other Heavy Truck or Military Tactical Vehicle Wheeled Vehicle categories such as Drive Train; Brakes; Suspension & Steering; Electrical; Heating & A/C and Preventative Maintenance. ASE requirement can be waived with five years of experience as a Depot Level Shop lead Mechanic or Supervisor., • Be able to use Asset Works LLC software “Fleet Focus” to record maintenance actions, track time and document parts ordered and installed., • Be capable of maintaining tactical vehicles built by Oshkosh, AM General, Mack, International and Freightliner manufacturers., • Have the capacity and technical skills needed to make all levels of repair to suspension, steering, electrical, instrumentation, computer controls, driver controls, brakes, fuel delivery, carburetion and fuel injection, exhaust, and power train systems., • Be capable of repairing electric and manual window mechanisms, vehicle locks, seats, and incorporated electronics., • Be capable of demounting and mounting all sizes of tires and balancing the wheel and tire assembly once mounted. Tire repairs shall include plug insertion, patches, and complete replacement depending upon severity of damage. We are passionate about everything we do. One hundred percent of our government-focused teammates are former members of the Department of War or the Intelligence Community who still believe in supporting our nation. We offer like-minded individuals the opportunity to continue working in small teams on unique and challenging problem sets that further our nation's security. If you possess the experience, qualifications and drive required for this position, please APPLY NOW for consideration! Requirements:

Job Description Job Description JOB TITLE: Heavy Equipment Mechanic REPORTS TO: Service Manager/Shop Foreman/Service Advisor HOURS AND PAY SCHEDULE: Normal hours are 7:00 AM to 3:30 PM Monday through Friday. This position is non-exempt. COMPANY OVERVIEW: Haaker Equipment Company employs roughly 150 employees between seven different branches in La Verne, Santee, Las Vegas, Phoenix and Centeral Valley. We take great pride in providing the best products and service in our industry. Haaker Equipment Company empowers our employees to make the right decisions in order to take care of our customers. JOB SUMMARY: This position must have general mechanical experience. Requires individual to work under the supervision of the Service Manager, Shop Foreman, and Service Advisor. Individual will receive work assignments and schedule on a daily basis. Perform assigned tasks per schedule and process all required documentation. Must be able to communicate effectively with customers and internal staff, regarding repairs. TYPICAL RESPONSIBILITIES: • Perform repairs on customer equipment as directed by the Service Writer or Shop Foreman, in indoor or outdoor applications and in dirty or foul environments., • Perform Preventative Maintenance on customer’s equipment., • Perform required maintenance on Company owned equipment., • Report and track time worked on jobs accurately., • Complete repair orders as outlined with efficiency and accuracy., • Diagnose and perform repairs., • Ability to determine the proper tools and equipment needed for a job., • Operate, monitor and control equipment or systems to diagnose and perform repairs on equipment, • Inspect equipment to determine if additional work is required., • Ability to remain stationary, position or traverse equipment to properly diagnose repairs. Also be able to position parts up to 50 pounds into place for proper installation., • Save and tag parts per factory warranty guidelines if a warranty repair., • Create parts list for required repairs., • Read and understand electrical, hydraulic and pneumatic schematics and drawings., • Notify Service Manager and Service Writer if additional work is required or items listed on service order are not needed., • Notify Service Manager and Service Writer if repairs cannot be completed within time frame promised., • Supervise work of apprentice technicians as assigned., • Maintain 90% billable hours., • Must be able to perform basic fabrication jobs such as cutting, measuring, torching, welding, etc., • Keep shop and/or service truck work space clean., • Keep up to date with factory training, tech tips and service bulletins., • 2-5 years of mechanical experience working on hydraulic, pneumatic and electrical systems, or heavy equipment maintenance experience., • Ability to diagnose and troubleshoot equipment systems., • Ability to identify component failures, worn or damaged parts, and must be able to perform quality repairs., • Ability to work well with customers as well as internal staff., • Ability to obtain a class B license within 120 days after hire date., • Must have and maintain a clean driving record., • Ability to lift and carry up to 50lbs., • Must be able to stand, stoop, squat and sit for long periods of time as repair requires., • Must be able to work overhead for extended periods of time., • Must be able to push and/or pull with up to 25lbs of pressure., • 5+ years of mechanical experience working on hydraulic, pneumatic and electrical systems, or heavy equipment maintenance experience.

Job DescriptionDescription: The Ascendancy Group’s Mission To be the unequaled provider of special operations forces (SOF) and Intelligence Community focused technical, service, and training-based solutions. Security Requirement: · A SECRET security clearance is required. Roles and Responsibilities: • Mechanics shall be capable of performing all levels of repairs on automotive, heavy truck and construction equipment both in the shop or field with no supervision., • Understand and follow all regulations related to safety, handling hazardous materials, and facility access., • Perform inspections, preventive maintenance, and repairs identified during initial inspections and as per the guidance recommended by the Original Equipment Manufacturer (OEM) and/or the NAVFAC P-300., • Conduct mandated 120 calendar day cycle for completing general maintenance and safety inspections on each piece of equipment., • Schedule all equipment for service every 120 calendar days or sooner in the event the vehicle accumulates high mileage within the normal service cycle., • Manage inventory list of equipment by Shop Location, Equipment Identification Number, Make, Model, Year, type of fuel and current mileage., • Pick up vehicles requiring service from a location designated by the Government’s Transportation Officer for each respective Shop Location., • Perform maintenance and repair to Government owned equipment with total numbers varying by +/-5% during the performance period., • Conduct scheduled maintenance in three specific levels identified as “A”, “B”, and “C” based on mileage or time. Standard vehicle safety inspections shall be completed as a specific task on every scheduled maintenance Shop Repair Order (SRO)., • Conduct direct liaison with the government to discuss access to equipment, maintenance schedules, and use of Government furnished equipment (GFE) if provided., • Perform welding, metal forming, sheet metal work, minor body, and fender repairs.?, • Must possess a valid state driver’s license from their state of residency to operate motor vehicles., • Have a minimum of six (6) years’ experience as an Original Equipment Manufacturer (OEM) mechanic at truck tractor dealership, commercial fleet service shop, intermediate or depot level military maintenance facility or have E7 – E8 level military experience with diesel engines over 400 hp or Civil Engineering Support Equipment., • Possess a Master Mechanic Automotive Service Excellence (ASE) certification in medium-heavy trucks or military tactical wheeled vehicles or completing of a “C” level military technical school. ASE requirement can be waived with five years of experience as a Depot Level Shop lead Mechanic or Supervisor., • Be able to use Asset Works LLC software “Fleet Focus” to record maintenance actions, track time and document parts ordered and installed., • Must have the ability to fix all tactical, expeditionary, and non-tactical equipment in the shop; provide expert input on maintenance issues; and provide oversight to less experienced personnel. We are passionate about everything we do. One hundred percent of our government-focused teammates are former members of the Department of War or the Intelligence Community who still believe in supporting our nation. We offer like-minded individuals the opportunity to continue working in small teams on unique and challenging problem sets that further our nation's security. If you possess the experience, qualifications and drive required for this position, please APPLY NOW for consideration! Requirements:

Job DescriptionBenefits: • 401(k), • 401(k) matching, • Opportunity for advancement, • Support other personnel as required, including (but not limited to): cutting, grinding, cleaning, tacking, etc., • Lifting 50lb., • General power tool knowledge (angle grinders, drills, band saw, cold saw)., • Welding (MIG 0.035, Flux Core, Dual Shield 0.045)., • Loading and unloading trucks., • Basic knowledge on how to read a measuring tape., • 8-hour shift Monday to Friday., • Material stock check (shipping & receiving)., • Steel profiles & processes knowledge., • Forklift certification preferred., • Operating overhead crane & rigging., • Minimum education requirement: High School diploma or equivalent., • Must have a basic understanding of standard power tools and possess the ability to read / follow simple instructions., • Lift heavy objects up to 50 pounds., • Work in confined spaces

Job DescriptionAbout VetPowered: VetPowered, LLC, named Veteran Owned Small Business of the Year in the United States is a rapidly growing San Diego based corporation specializing in manufacturing, welding, fabrication, machinery repair and customized training under private and US Government contracts. VetPowered employs a highly trained workforce that uses the latest in cutting edge CNC equipment. VetPowered is dedicated to bringing advanced manufacturing back to America. Key Job Functions: At VetPowered, the Setup Machinist is responsible for the efficient and accurate setup, operation, and troubleshooting of CNC machining centers (mills and lathes). This role ensures that all jobs are properly prepared for production, meeting quality, safety, and efficiency standards. The Setup Machinist plays a critical role in reducing setup times, minimizing scrap, and improving overall shop throughput. Here is a detailed breakdown of your responsibilities: Essential Duties and Responsibilities: • Perform complete CNC machine setups including:, • Loading and verifying programs (G-code), • Installing and qualifying tooling, • Setting tool offsets and work offsets (G54–G59), • Fixture setup, alignment, and verification, • Interpret blueprints, GD&T, and work instructions to ensure accurate setup and production, • Conduct dry runs and first article inspections to validate setup prior to production release, • Adjust offsets, speeds, and feeds to optimize performance, reduce cycle time, and maintain part quality, • Troubleshoot machining issues including:, • Tool wear/breakage, • Dimensional inaccuracies, • Program inconsistencies, • Ensure all parts meet required tolerances using precision measuring tools (calipers, micrometers, indicators, gauges), • Collaborate with programmers and engineers to improve machining processes, tooling strategies, and fixture design, • Support continuous improvement initiatives focused on:, • Reducing setup time, • Minimizing scrap, • Increasing efficiency and throughput, • Train and mentor machine operators and OJT students on proper setup techniques and machine operation, • Maintain a clean, organized, and safe work environment in accordance with 6S standards, • Ensure compliance with AS9100 (or equivalent) quality standards and internal procedures, • Accurately document setup sheets, tooling lists, and job notes for repeatability, • Monitor machine performance and report issues related to equipment, tooling, or processes, • Follow all safety procedures and report hazards immediately, • Other duties as required in support of the department and company goals., • 3 – 7+ years of CNC machining experience, with strong setup experience preferred., • Experience with CNC mills and/or lathes (3-axis, 4-axis, or 5-axis preferred), • Strong understanding of G-code and machining processes, • Ability to read and interpret blueprints and GD&T, • Proficiency with precision measuring tools and inspection techniques, • Experience with fixturing, tooling selection, and setup optimization, • Familiarity with CAM software (Fusion 360, Mastercam, or similar) preferred, • Knowledge of AS9100 or similar quality systems preferred, • Experience in UniPoint, and JobBoss (a plus), • Attention to Detail- The ability to accomplish a task while demonstrating a thorough concern for all the areas involved, no matter how small., • All In-Brings their whole self to work and giving it their all no matter how difficult the job or situation., • Accountable- Taking personal responsibility for their work, owns mistakes, communicate honestly rather than hiding the truth, does not blame others or make excuses., • Adaptable- Easily adjusts to changing circumstances., • Maintain a SAFE working environment for all personnel, • Reduce setup time across jobs by X% within first 6 months, • Achieve first article approval on first run ≥ X% of the time, • Minimize scrap and rework to ≤ X% of production, • Ensure on-time job readiness for production schedules, • Maintain accurate and complete setup documentation for repeat jobs Pay: The range of pay for this California-based position is $30.00 - $38.00 hourly. Overtime: Overtime applies based on workload and production needs. Incentive Compensation: Potential for bonus/incentives after one full year of employment. The actual compensation offer will carefully consider a wide range of factors including your skills, qualifications, experience, and location. If your experience looks a little different from what we’ve listed and you think can bring value to VetPowered we would love to learn more about you and encourage you to apply. Benefits and Perks: VetPowered makes available comprehensive benefits the 1st of the month, following the date of hire. Options include Medical (50% employer contribution), dental and vision coverage (100% employer contribution), a 401k program with employer match up to $1,000 per year, 8 paid holidays, and paid time off. While the Company intends to maintain these employee benefits, it reserves the absolute right to modify, amend or terminate these benefits at any time and for any reason. Dress code: Our office staff works in a business casual or relaxed business casual environment. Position is provided VetPowered uniforms, and laundry service. Because the dress code does vary by position and department, please consult with your hiring manager to confirm your applicable dress code at the time of hire. Supervisory: None Physical Requirements: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk or hear. The employee frequently is required to stand; sit; walk; use hands to finger, handle or feel; and reach with hands and arms. The employee is regularly required to push, move, lift or otherwise bear 10-30lbs (35-75lb W/M). Applications may include but are not limited to repetitive work using a computer keyboard, mouse and headphones while sitting and/or standing at an assigned work desk area. Work Environment: The employee works in a contract manufacturing facility in an urban industrial neighborhood. Other areas within the facility are mixed use such as administration, classrooms, welding, and machining areas. Employee may have additional environmental hazards such as: chemical, electrical, flammable, or mechanical in nature. E-Verify Compliance Statement: VetPowered, LLC participates in the E-Verify program. We ensure employment eligibility of all employees by using the E-Verify electronic verification system. Policy for Discrimination, Harassment and Retaliation Prevention: VetPowered, LLC is committed to providing a professional work environment free from discrimination and harassment, including discrimination and harassment based on a protected characteristic, and an environment free from retaliation for participating in any protected activity covered by this policy. VetPowered, LLC employees are expected to assume responsibility for maintaining a work environment that is free from discrimination, harassment, and retaliation. Employees are encouraged to promptly report conduct that they believe violates this policy so that we have an opportunity to address and resolve any concerns. Managers and supervisors are required to promptly report conduct that they believe violates this policy. We are committed to responding to alleged violations of this policy in a timely and fair manner and to taking appropriate action aimed at ending the prohibited conduct. EEO Statement: VetPowered, LLC is committed to providing equal employment opportunities to all employees, applicants, unpaid interns, and volunteers without regard to actual or perceived: race (including hair texture or protected hairstyles, e.g. braids, locks, and twists), color, religion, religious creed (including religious dress and grooming practices), national origin (including language use restrictions), ancestry, citizenship, disability (mental and physical) including HIV and AIDS, medical condition (including cancer and genetic characteristics), genetic information, marital status, sex (including pregnancy, childbirth, breastfeeding, or related medical conditions), gender, gender identity, gender expression, age (40 years and over), sexual orientation, veteran and/or military status, family and medical leave status, domestic violence victim status, political affiliation, and any other status protected by federal, state, or local law. All openings are subject to change without notice, due to the volume of applications / resumes received, we are unable to respond to status inquiries. Please be assured that your information is being properly handled and forwarded to the appropriate hiring staff. If your skills and qualifications meet the needs of the job, you will be contacted. Powered by JazzHR xldgCan7C0

Job Description Employment Type: Full-Time | Hourly | Non-Exempt Pay Range: $28.50 - $40.71 Location: Vigor Marine CM San Diego, 1995 Bay Front Street, San Diego, CA 92113 Who We Are Vigor Marine CM San Diego, a Vigor Marine Group company, builds on the proud legacy of Continental Maritime of San Diego (CMSD) to stand as a vital force on San Diego’s working waterfront. As a certified Master Ship Repair Contractor for the U.S. Navy, our skilled professionals have successfully completed hundreds of ship repair and modernization projects for the Navy and Military Sealift Command. We perform maintenance and modernization on all classes of major surface vessels, including CVN, CG and DDG, as well as amphibious ships such as LHD, LHA, LSD, LPD and auxiliary ships. Our work spans a full range of Combatant, Hull, Mechanical and Electrical, and Habitability systems, supporting the readiness and mission success of the U.S. Fleet. Position Specifics The Electrician is responsible for maintain working knowledge of all shipboard electrical systems and the ability to adapt to a variety of situations and the capability to work in any environment onboard a ship; ability to use present skills to solve complex problems in any electrical system encountered; performs other related tasks as assigned, some of which may become essential to the position. Minimum Requirements • Trade or military schooling and thorough knowledge shipboard electronics., • Experienced with power generation, steam or gas turbine, motor driven, and static sources., • Strong background in electro-mechanical skillset., • High School diploma or equivalent., • Performs maintenance and repair of generators, switchboards, controllers, circuit breakers, electrical motors, distribution panels, alarm and lighting circuits., • Conducts insulation resistance measurements of electrical cables to determine condition and effects repairs or replacements as required., • Disassembles motors for inspection and cleaning., • Installs and repairs electrical wiring, systems, and fixtures., • Inspects and tests electrical equipment., • Cleans electrical equipment and parts by steam cleaning, dipping, and baking., • Ensures proper installation of gages, switches, and thermometers. Verifies instrument calibration requirements in applicable NAVSEA documentation to determine if the instrument requires calibration., • Secures appropriate tools for each assigned job., • Oversees accurate reading and interpreting of test information., • Counts and places wires with precision., • Ensures daily clean-up of work site., • Maintains constant safety awareness., • Performs other related duties as assigned., • Complete understanding of electronic components and circuitry., • Must know all NAVSEA STD items pertaining to electrical trade., • Knowledgeable of power distribution and equipment., • Retain a good understanding of machinery used onboard ships., • Able to read/understand electrical drawings and schematics, • Ability to recognize electrical or electronic devices and circuitry used throughout the Maritime industry., • Ability to utilize past experience in new situations to create workable solutions, • Complies with all Environmental, Health, Safety, and Security Policies and Procedures, • Demonstrates the highest standards of professional and ethical behavior, putting the company values and commitments at the forefront of decisions and actions., • Fosters openness and early detection of possible ethics, compliance, and contractual issues to support early intervention of nonconformities and/or compliance violations., • Fulfills all training and development activities in accordance with designated deadlines., • Contributes to the development of subordinates within the work group., • Ensures the quality standards are adhered to by him/her and other subordinates within the work group. Physical Requirements • Frequently moves throughout the shipyard., • Work at heights and in confined spaces., • Must be able to ascend/descend stairs/ladders/ramps, aboard ships in shipyards under industrial conditions and in confined spaces., • Must be able to move heavy equipment and boxes, weighing up to 50 pounds., • May be exposed to rapid changes in microclimates, industrial processes, and other environmental factors while collecting data, providing direction, and observing performance of task teams., • Most work is performed aboard ships or in industrial conditions. Shop, shipboard, warehouse, industrial environment., • May be exposed to fumes and irritants including welding/burning fumes, paints, oils, greases and various cleaning solutions and solvents, noise, high heat and humidity hazards while wearing the required Personal Protective Equipment (PPE). Our Commitment The Vigor Marine CM San Diego Management Team is committed to providing the necessary structure, tools and environment for our employees. We act in the economic best interests of our customers and our company, in a professional, honest and sincere manner. Our mission is accomplished through unwavering commitment to the following principles: • Teamwork, • Professional conduct, • Integrity, • Total quality, • Customer Satisfaction, • Open, honest communication at all levels, • Awareness of environmental issues, • Empowerment at every level Vigor Marine CM San Diego is an Equal Opportunity Employer of Veterans and individuals with disabilities. U.S. Citizenship may be required for certain positions. We offer excellent company-paid benefits and a savings plan. How to Apply In Person: Vigor Marine CM San Diego 1995 Bay Front Street San Diego, CA 92113 Online:

Job Description Employment Type: Full-Time | Hourly | Non-Exempt Pay Range: $28.50 - $40.71 Location: Vigor Marine CM San Diego, 1995 Bay Front Street, San Diego, CA 92113 Who We Are Vigor Marine CM San Diego, a Vigor Marine Group company, builds on the proud legacy of Continental Maritime of San Diego (CMSD) to stand as a vital force on San Diego’s working waterfront. As a certified Master Ship Repair Contractor for the U.S. Navy, our skilled professionals have successfully completed hundreds of ship repair and modernization projects for the Navy and Military Sealift Command. We perform maintenance and modernization on all classes of major surface vessels, including CVN, CG and DDG, as well as amphibious ships such as LHD, LHA, LSD, LPD and auxiliary ships. Our work spans a full range of Combatant, Hull, Mechanical and Electrical, and Habitability systems, supporting the readiness and mission success of the U.S. Fleet. Position Specifics The Electrician is responsible for maintain working knowledge of all shipboard electrical systems and the ability to adapt to a variety of situations and the capability to work in any environment onboard a ship; ability to use present skills to solve complex problems in any electrical system encountered; performs other related tasks as assigned, some of which may become essential to the position. Minimum Requirements • Trade or military schooling and thorough knowledge shipboard electronics., • Experienced with power generation, steam or gas turbine, motor driven, and static sources., • Strong background in electro-mechanical skillset., • High School diploma or equivalent., • Performs maintenance and repair of generators, switchboards, controllers, circuit breakers, electrical motors, distribution panels, alarm and lighting circuits., • Conducts insulation resistance measurements of electrical cables to determine condition and effects repairs or replacements as required., • Disassembles motors for inspection and cleaning., • Installs and repairs electrical wiring, systems, and fixtures., • Inspects and tests electrical equipment., • Cleans electrical equipment and parts by steam cleaning, dipping, and baking., • Ensures proper installation of gages, switches, and thermometers. Verifies instrument calibration requirements in applicable NAVSEA documentation to determine if the instrument requires calibration., • Secures appropriate tools for each assigned job., • Oversees accurate reading and interpreting of test information., • Counts and places wires with precision., • Ensures daily clean-up of work site., • Maintains constant safety awareness., • Performs other related duties as assigned., • Complete understanding of electronic components and circuitry., • Must know all NAVSEA STD items pertaining to electrical trade., • Knowledgeable of power distribution and equipment., • Retain a good understanding of machinery used onboard ships., • Able to read/understand electrical drawings and schematics, • Ability to recognize electrical or electronic devices and circuitry used throughout the Maritime industry., • Ability to utilize past experience in new situations to create workable solutions, • Complies with all Environmental, Health, Safety, and Security Policies and Procedures, • Demonstrates the highest standards of professional and ethical behavior, putting the company values and commitments at the forefront of decisions and actions., • Fosters openness and early detection of possible ethics, compliance, and contractual issues to support early intervention of nonconformities and/or compliance violations., • Fulfills all training and development activities in accordance with designated deadlines., • Contributes to the development of subordinates within the work group., • Ensures the quality standards are adhered to by him/her and other subordinates within the work group. Physical Requirements • Frequently moves throughout the shipyard., • Work at heights and in confined spaces., • Must be able to ascend/descend stairs/ladders/ramps, aboard ships in shipyards under industrial conditions and in confined spaces., • Must be able to move heavy equipment and boxes, weighing up to 50 pounds., • May be exposed to rapid changes in microclimates, industrial processes, and other environmental factors while collecting data, providing direction, and observing performance of task teams., • Most work is performed aboard ships or in industrial conditions. Shop, shipboard, warehouse, industrial environment., • May be exposed to fumes and irritants including welding/burning fumes, paints, oils, greases and various cleaning solutions and solvents, noise, high heat and humidity hazards while wearing the required Personal Protective Equipment (PPE). Our Commitment The Vigor Marine CM San Diego Management Team is committed to providing the necessary structure, tools and environment for our employees. We act in the economic best interests of our customers and our company, in a professional, honest and sincere manner. Our mission is accomplished through unwavering commitment to the following principles: • Teamwork, • Professional conduct, • Integrity, • Total quality, • Customer Satisfaction, • Open, honest communication at all levels, • Awareness of environmental issues, • Empowerment at every level Vigor Marine CM San Diego is an Equal Opportunity Employer of Veterans and individuals with disabilities. U.S. Citizenship may be required for certain positions. We offer excellent company-paid benefits and a savings plan. How to Apply In Person: Vigor Marine CM San Diego 1995 Bay Front Street San Diego, CA 92113 Online:

Job Description Entry Level Manufacturing Worker - 1st Shift - Sorrento Valley Job Description Join our dynamic team in the cartridge department as a Cleanroom Production Operator. You will work in a cleanroom setting, assembling cartridges, monitoring manufacturing processes, and ensuring quality and safety standards are met. Responsibilities • Assemble cartridges in a cleanroom environment., • Collaborate with a team on a manufacturing line to complete assemblies., • Monitor semi-automated manufacturing processes., • Work across four different lines: inspections, operating automated machines, sub-assembly/welding, and testing., • Review batch records and ensure documentation accuracy., • Ability to follow work instructions and standard operating procedures (SOPs)., • Proficiency in computer use for training and documentation., • Attention to detail and reliability., • Experience in mechanical assembly and medical device production., • Familiarity with inspection, GMP standards, and packaging., • Previous experience in a fast-paced environment is highly desirable. Be part of a great team culture where everyone cares for each other. Work in a large company with a family-like team, where respect is given to all employees, whether full-time or contract. Take pride in being part of a team that values respect and teamwork. Work Environment The position is based in the cartridge department, with potential work across other departments as needed. Work in an ISO Class 8 cleanroom, adhering to specific dress codes including cleanroom PPE, no fragrances, and no makeup. Flexibility is essential, as work locations may vary between buildings approximately 2.5 miles apart. Shifts run from 4:00 AM to 2:30 PM, Monday to Thursday. Job Type & Location This is a Contract position based out of San Diego, CA. Pay and Benefits The pay range for this position is $17.75 - $17.75/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description Employment Type: Full-Time | Hourly | Non-Exempt Pay Range: $28.50 - $40.71 Location: Vigor Marine CM San Diego, 1995 Bay Front Street, San Diego, CA 92113 Who We Are Vigor Marine CM San Diego, a Vigor Marine Group company, builds on the proud legacy of Continental Maritime of San Diego (CMSD) to stand as a vital force on San Diego’s working waterfront. As a certified Master Ship Repair Contractor for the U.S. Navy, our skilled professionals have successfully completed hundreds of ship repair and modernization projects for the Navy and Military Sealift Command. We perform maintenance and modernization on all classes of major surface vessels, including CVN, CG, and DDG, as well as amphibious ships such as LHD, LHA, LSD, LPD, and auxiliary ships. Our work spans a full range of Combatant, Hull, Mechanical and Electrical, and Habitability systems, supporting the readiness and mission success of the U.S. Fleet. Position Specifics Vigor Marine CM San Diego is currently seeking a Shipfitter Leadman to support our operations. The Shipfitter Leadman is responsible for leading and coordinating shipfitters, helpers, and welders engaged in the layout, fitting, alignment, and installation of shipboard structural components. The Leadman ensures work is completed safely, efficiently, and in accordance with shipyard procedures, production schedules, drawings, and quality standards during second shift operations. The position works alongside first shift leadership through daily turnovers to ensure continuity of work and production progress between shifts. Primary Duties • Lead and coordinate the daily work of shipfitters, helpers, and welders assigned to structural fabrication and repair tasks during second shift operations., • Interpret shipyard drawings, blueprints, specifications, and technical work documents., • Plan and assign work to meet production schedules and project milestones., • Lay out, align, and fit structural components including plates, frames, decks, bulkheads, brackets, and foundations., • Measure and mark materials to ensure proper fit and structural alignment., • Perform oxy-fuel cutting and material preparation for installation., • Grind and bevel steel components to ensure proper fit-up and weld preparation., • Verify proper fit-up and alignment prior to welding., • Coordinate work with welders, riggers, inspectors, and supervisors to maintain workflow and productivity., • Identify structural deficiencies or discrepancies and implement corrective actions., • Ensure work complies with shipyard quality standards and inspection requirements., • Enforce shipyard safety policies including hot work, confined space entry, and fall protection requirements., • Provide on-the-job training and technical guidance to shipfitters and helpers., • Report work progress, material needs, and production issues to the Foreman or Production Supervisor., • Coordinate with first shift supervision and conduct daily turnovers to ensure continuity of work, status updates, and proper transition of ongoing tasks between shifts., • Perform work in confined spaces, elevated work areas, and shipboard environments as required. Minimum Requirements • High school diploma or GED., • Minimum 5–10 years of shipfitting or structural steel fabrication experience in shipbuilding or ship repair environments., • Demonstrated leadership ability directing shipfitting crews in a production environment., • Ability to read and interpret shipyard structural drawings, blueprints, and work specifications., • Experience performing steel layout, fitting, burning, structural alignment, and structural assembly., • Knowledge of shipboard structural components including frames, decks, bulkheads, foundations, and reinforcements., • Experience performing structural work on U.S. Navy vessels or commercial ships., • Familiarity with NAVSEA standards and shipyard repair procedures., • Demonstrated working knowledge of U.S. Navy ship repair standards and technical requirements including:, • MIL-STD-22D – Welded Joint Design for Ship Structure, • MIL-STD-1689 – Fabrication, Welding, and Inspection of Ship Structure, • DM 10-623B – Structural Repair Manual for Naval Surface Ships, • Experience working with HY-80 and HY-100 high-strength steels., • Current SMAW T-8 welding certification (ability to obtain and maintain certification in accordance with shipyard welding procedures)., • Proficiency with shipfitting tools including oxy-fuel cutting equipment, grinders, magnetic drills, hydraulic tools, and alignment equipment., • Ability to work in physically demanding shipboard environments and lift up to 50 lbs., • Previous Leadman or supervisory experience in a shipyard production environment., • Experience coordinating structural repairs on U.S. Navy surface combatants or auxiliary vessels., • Strong understanding of NAVSEA fabrication, inspection, and quality assurance requirements.US Citizenship if required, • The ability to acquire a DBIDS credential is required Physical Requirements • Most work is performed aboard ships or in industrial conditions. Shop, shipboard, warehouse, industrial environment, • May be exposed to fumes and irritants including welding/burning fumes, paints, oils, greases and various cleaning solutions and solvents, noise, high heat and humidity hazards while wearing, • the required Personal Protective Equipment (PPE), • Frequently moves throughout the shipyard, • Work at heights and in confined spaces, • Must be able to ascend/descend stairs/ladders/ramps, aboard ships in shipyards under industrial conditions and in confined spaces, • Must be able to move heavy equipment and boxes, weighing up to 50 pounds Our mission is accomplished through unwavering commitment to the following principles: • Teamwork, • Professional Conduct, • Integrity, • Total Quality, • Customer Satisfaction, • Open, honest communication at all levels, • Awareness of environmental issues, • Empowerment at every level Vigor Marine CM San Diego is an Equal Opportunity Employer of Veterans and individuals with disabilities. U.S. Citizenship may be required for certain positions. We offer excellent company-paid benefits and a savings plan. How to Apply In Person: Vigor Marine CM San Diego 1995 Bay Front Street San Diego, CA 92113 Online:

Job DescriptionEntry Level Manufacturing Worker 1st Shift/2nd Shift - Sorrento ValleyPayrate- $17.75/HR Job Description Join our dynamic team in the cartridge department as a Cleanroom Production Operator. You will work in a cleanroom setting, assembling cartridges, monitoring manufacturing processes, and ensuring quality and safety standards are met. Responsibilities • Assemble cartridges in a cleanroom environment., • Collaborate with a team on a manufacturing line to complete assemblies., • Monitor semi-automated manufacturing processes., • Work across four different lines: inspections, operating automated machines, sub-assembly/welding, and testing., • Review batch records and ensure documentation accuracy., • Ability to follow work instructions and standard operating procedures (SOPs)., • Proficiency in computer use for training and documentation., • Attention to detail and reliability., • Experience in mechanical assembly and medical device production., • Familiarity with inspection, GMP standards, and packaging., • Previous experience in a fast-paced environment is highly desirable. Be part of a great team culture where everyone cares for each other. Work in a large company with a family-like team, where respect is given to all employees, whether full-time or contract. Take pride in being part of a team that values respect and teamwork. Work Environment The position is based in the cartridge department, with potential work across other departments as needed. Work in an ISO Class 8 cleanroom, adhering to specific dress codes including cleanroom PPE, no fragrances, and no makeup. Flexibility is essential, as work locations may vary between buildings approximately 2.5 miles apart. Shifts run from 4:00 AM to 2:30 PM, Monday to Thursday. Job Type & Location This is a Contract position based out of San Diego, CA. Pay and Benefits The pay range for this position is $17.75 - $17.75/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description Phillips Tank & Structure (PTS) is no ordinary tank construction company. We specialize in the complex and fast-paced environment of tank repair on a nationwide scale. No two tanks are alike, so when they need repair, they often pose unique or complicated technical issues. Our experienced engineering staff are well-versed in API 650, API 653, AWWA D100, AWWA D103, API 12D, and other tank specifications. We build and repair welded above-ground storage tanks (ASTs), bolted tanks, and related structures. We also inspect, install, and repair tank systems such as aluminum geodesic dome covers, aluminum internal floating roofs (IFRs), IFR mechanical shoe seals, liquid level gauges, fire protection systems, silo support structures, industrial storage tanks, and heating and insulation systems. Statement of Purpose To provide satisfying, long-term work opportunities for our dedicated employees - We believe that there is pride to be gained in performing productive work, and there should be great satisfaction in achieving results as a team. Our efforts will be spent towards continuously improving the health, strength, and quality of the company. We believe our collective success will generate value that supports our families and benefits our communities. The PTS difference: • Our people are our #1 priority., • Teamwork is the best way to solve problems., • Safety is critical. Everyone is responsible for creating a safe work environment., • We strive to find new and better ways of doing things every day., • Clear expectations and directions are always given., • Frequent coaching and support lead to great performers and high quality for our customers., • A manager's job is to set each employee up for success every day., • We don't punish people for mistakes - we work together to understand the root cause of a mistake and solve it together., • Performing arc and torch cutting and gouging., • Using generators, compressors, tuggers, blowers, grinders, and other power and air tools., • Welding plate with 7018, 7024 and 6010 stick (SMAW), flux core (FCAW), and submerged arc automatic machines (3 o’clock and “goat”/tractor)., • Using come-alongs, hydraulic jacks, hoists, air bags, winches, and other lifting equipment., • Using tank shell buggies, tank scaffolding, tank ladders, and other specialty equipment., • Performing vacuum box tests, oil tests, dye penetrant tests, and other non-destructive quality examinations., • Using gas monitors, fresh air kits, respirators, emergency rescue kits, and other safety equipment., • Operating forklifts, man lifts, boom lifts, and other large lifting equipment., • Knowledge of crane operations (including rigging and signaling), • Reading detailed erection and fabrication drawings., • Planning the sequence and methods of fitting up, welding, repairing, and constructing tanks., • Completing job safety analysis, safety audits, site-specific training, and other safety training., • Follow directions and work professionally with other crew members. \, • Other duties as assigned. Requirements, • Have great communication and organization skills., • The ability to solve problems and suggest improvements to our systems., • Have excellent attendance and show up to work on time every day., • The willingness to learn., • Be at least 18 years old., • Be able to lift 50 lbs., • Have a high school diploma or equivalent., • Be eligible to work in the United States., • Be willing to authorize background checks., • Have no criminal convictions for dishonesty, sexual misconduct, violence, or acts of terrorism., • Have a valid driver’s license., • Be willing to authorize motor vehicle driving record checks., • Be willing to submit to pre-hire, random, and post-incident drug and alcohol testing., • Ability to weld is a plus. Benefits: • Competitive Pay with annual reviews, • Health, Dental and Vision insurance, • 401k with company match, • Great culture of teamwork, learning and development. Fg7QkEp8sR

Job DescriptionAbout VetPowered: VetPowered, LLC, named Veteran Owned Small Business of the Year in the United States, is a rapidly growing San Diego-based corporation specializing in manufacturing, welding, fabrication, machinery repair, and customized training under private and U.S. Government contracts. VetPowered employs a highly trained workforce utilizing advanced CNC equipment. The company is focused on strengthening and supporting advanced manufacturing in the United States. Key Job Functions: At VetPowered, the Welder Fabricator is responsible for performing welding and metal fabrication work in support of shop operations and custom projects. This role requires strong technical skills, attention to detail, and the ability to work both independently and as part of a team. Work includes building, repairing, and modifying metal components and equipment based on drawings, samples, or direction. The position supports a mission-driven organization that values precision, professionalism, and service to the veteran community. Essential Duties and Responsibilities:• Perform certified welding and fabrication work to industry standards; a current, verifiable welding certification is required (not entry-level or hobby experience) • Measure, cut, fit, form, and shape metal components safely and accurately, • Perform TIG, MIG, and Stick welding on mild steel, stainless steel, aluminum, and specialty alloys including Inconel and Monel, • Build and repair welded structures, components, and equipment from drawings, samples, or direction, • Fabricate carts, pallets, trailers, bumpers, and custom metal projects using a range of materials and structural shapes, • Operate fabrication equipment including band saws, cold saws (manual, semi-automatic, and automatic), mills, shears, hydraulic brakes, plasma cutters, and related tools, • Utilize CNC equipment such as CNC shears, CNC press brakes, tube notchers, abrasive notchers, and other metalworking machinery as required, • Support and guide others as needed to ensure work is completed safely, accurately, and on schedule, • Load and unload equipment and materials safely onto vehicles and trailers; assist with pickup and delivery of materials as needed, • Operate a forklift safely or obtain forklift certification within a reasonable timeframe, • Work effectively across multiple projects while maintaining quality and attention to detail, • Communicate clearly and professionally with team members and leadership; identify issues and provide practical solutions, • Follow all company, state, and federal safety policies and procedures • Valid driver’s license with reliable transportation to and from the worksite, • Current or previous MIG and TIG welding certifications; must be able to requalify or certify within two (2) weeks of hire, • Successful completion of an entrance welding examination in MIG, TIG, and Stick welding on mild steel, aluminum, and stainless steel, including fabrication of a test piece, • Strong communication skills; experience with prototype development or jig design is a plus, • Eligibility to obtain a DBIDS Clearance, including the ability to meet background requirements, • Compliance with all applicable company, state, and federal safety regulations, • Attention to Detail- The ability to accomplish a task while demonstrating a thorough concern for all the areas involved, no matter how small., • All In-Brings their whole self to work and giving it their all no matter how difficult the job or situation., • Accountable- Taking personal responsibility for their work, owns mistakes, communicate honestly rather than hiding the truth, does not blame others or make excuses., • Adaptable- Easily adjusts to changing circumstances. Pay: The range of pay for this California-based position is $38.00 - 43.00 per hour. Incentive Compensation: Potential for bonus or incentive compensation after one full year of employment. The actual compensation offer will carefully consider a wide range of factors including skills, qualifications, experience, and location. If your experience differs from what is listed but you believe you can add value to VetPowered, you are encouraged to apply. Schedule: This position is Monday-Friday, 7:00am-3:30pm. Occasional weekends or schedule adjustments may be required to support Company goals and production needs. Benefits and Perks: VetPowered makes available comprehensive benefits the 1st of the month, following the date of hire. Options include Medical (50% employer contribution), dental and vision coverage (100% employer contribution), a 401k program with employer match up to $1,000 per year, 8 paid holidays, and paid time off. While the Company intends to maintain these employee benefits, it reserves the absolute right to modify, amend or terminate these benefits at any time and for any reason. Dress code: Position is provided VetPowered uniforms, and laundry service. Because the dress code does vary by position and department, please consult with your hiring manager to confirm your applicable dress code at the time of hire. Supervisory: None Physical Requirements: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk or hear. The employee frequently is required to stand; sit; walk; use hands to finger, handle or feel; and reach with hands and arms. The employee is regularly required to push, move, lift or otherwise bear 10-30lbs (35-75lb W/M). Applications may include but are not limited to repetitive work using a computer keyboard, mouse and headphones while sitting and/or standing at an assigned work desk area. Work Environment: The employee works in a contract manufacturing facility in an urban industrial neighborhood. Other areas within the facility are mixed use such as administration, classrooms, welding, and machining areas. Employee may have additional environmental hazards such as: chemical, electrical, flammable, or mechanical in nature. E-Verify Compliance Statement: VetPowered, LLC participates in the E-Verify program. We ensure employment eligibility of all employees by using the E-Verify electronic verification system. Policy for Discrimination, Harassment and Retaliation Prevention: VetPowered, LLC is committed to providing a professional work environment free from discrimination and harassment, including discrimination and harassment based on a protected characteristic, and an environment free from retaliation for participating in any protected activity covered by this policy. VetPowered, LLC employees are expected to assume responsibility for maintaining a work environment that is free from discrimination, harassment, and retaliation. Employees are encouraged to promptly report conduct that they believe violates this policy so that we have an opportunity to address and resolve any concerns. Managers and supervisors are required to promptly report conduct that they believe violates this policy. We are committed to responding to alleged violations of this policy in a timely and fair manner and to taking appropriate action aimed at ending the prohibited conduct. EEO Statement: VetPowered, LLC is committed to providing equal employment opportunities to all employees, applicants, unpaid interns, and volunteers without regard to actual or perceived: race (including hair texture or protected hairstyles, e.g. braids, locks, and twists), color, religion, religious creed (including religious dress and grooming practices), national origin (including language use restrictions), ancestry, citizenship, disability (mental and physical) including HIV and AIDS, medical condition (including cancer and genetic characteristics), genetic information, marital status, sex (including pregnancy, childbirth, breastfeeding, or related medical conditions), gender, gender identity, gender expression, age (40 years and over), sexual orientation, veteran and/or military status, family and medical leave status, domestic violence victim status, political affiliation, and any other status protected by federal, state, or local law. All openings are subject to change without notice, due to the volume of applications / resumes received, we are unable to respond to status inquiries. Please be assured that your information is being properly handled and forwarded to the appropriate hiring staff. If your skills and qualifications meet the needs of the job, you will be contacted. Powered by JazzHR uqoVAebrMC

Job DescriptionAbout VetPowered: VetPowered, LLC, named Veteran Owned Small Business of the Year in the United States is a rapidly growing San Diego based corporation specializing in manufacturing, welding, fabrication, machinery repair and customized training under private and US Government contracts. VetPowered employs a highly trained workforce that uses the latest in cutting edge CNC equipment. VetPowered is dedicated to bringing advanced manufacturing back to America. Key Job Functions: At VetPowered, the Senior Quality Inspector will play a critical role in ensuring that manufactured components and assemblies meet customer specifications, aerospace quality standards, and internal inspection requirements. This role will perform detailed inspections of machined parts and assemblies, support first article inspections, and help maintain quality documentation in accordance with AS9100 standards. Essential Duties and Responsibilities: Inspection and Verification • Perform detailed inspections of machined components, assemblies, and fabricated parts using precision measuring tools., • Interpret engineering drawings, GD&T callouts, blueprints, and specifications to verify dimensional accuracy and compliance., • Coordinate and perform first article inspections (FAI) in accordance with AS9102 standards., • Utilize precision measuring equipment such as calipers, micrometers, height gauges, bore gauges, and coordinate measuring machines (CMM)., • Maintain accurate inspection records and documentation for internal quality systems., • Document non-conforming materials and communicate findings to production and quality leadership., • Work closely with machinists and manufacturing teams to resolve quality issues and improve product quality., • Identify trends in inspection results and support root cause investigations for quality issues. Qualifications & Work Experience: To perform this job successfully, the candidate must be able to perform each essential duty satisfactorily (with or without an accommodation). The requirements listed below are representative of the knowledge, skill, and/or ability required. • High school diploma or equivalent required. Technical certification or associate degree in manufacturing, machining, or quality assurance preferred., • Minimum of 5+ years of experience in quality inspection within a manufacturing or aerospace environment., • Strong understanding of blueprint reading and geometric dimensioning and tolerancing (GD&T)., • Experience conducting first article inspections and familiarity with AS9102 documentation requirements., • Experience working within AS9100 quality systems preferred., • Experience with CMM inspection equipment (Zeiss preferred) is highly desirable., • Strong attention to detail and analytical problem-solving skills., • Ability to work independently and prioritize multiple inspection tasks., • Experience using UniPoint and JobBoss (a plus)., • Attention to Detail- The ability to accomplish a task while demonstrating a thorough concern for all the areas involved, no matter how small., • All In-Brings their whole self to work and giving it their all no matter how difficult the job or situation., • Accountable- Taking personal responsibility for their work, owns mistakes, communicate honestly rather than hiding the truth, does not blame others or make excuses., • Adaptable- Easily adjusts to changing circumstances. Schedule: This position is Monday-Friday, 7:00am-3:30pm. Occasional weekends, and shift changes may be necessary from time to time in order to support Company goals and production needs. Pay: This pay does not include any opportunity for incentive compensation and is only reflective of the base pay for this position. The range of pay for this California-based position is $78,000.00 - $88,000.00 annually. Incentive Compensation: Potential for bonus/incentives after one full year of employment. Benefits and Perks: VetPowered makes available comprehensive benefits the 1st of the month, following the date of hire. Options include Medical (50% employer contribution), dental and vision coverage (100% employer contribution), a 401k program with employer match up to $1,000 per year, 8 paid holidays, and paid time off. Dress code: Position is provided VetPowered uniforms, and laundry service. Physical Requirements: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk or hear. The employee frequently is required to stand; sit; walk; use hands to finger, handle or feel; and reach with hands and arms. The employee is regularly required to push, move, lift or otherwise bear 10-30lbs. Applications may include but are not limited to repetitive work using a computer keyboard, mouse and headphones while sitting and/or standing at an assigned work desk area. Work Environment: The employee works in a contract manufacturing facility in an urban industrial neighborhood. Other areas within the facility are mixed use such as administration, classrooms, welding, and machining areas. Employee may have additional environmental hazards such as: chemical, electrical, flammable, or mechanical in nature. E-Verify Compliance Statement: VetPowered, LLC participates in the E-Verify program. We ensure employment eligibility of all employees by using the E-Verify electronic verification system. Policy for Discrimination, Harassment and Retaliation Prevention: VetPowered, LLC is committed to providing a professional work environment free from discrimination and harassment, including discrimination and harassment based on a protected characteristic, and an environment free from retaliation for participating in any protected activity covered by this policy. VetPowered, LLC employees are expected to assume responsibility for maintaining a work environment that is free from discrimination, harassment, and retaliation. Employees are encouraged to promptly report conduct that they believe violates this policy so that we have an opportunity to address and resolve any concerns. Managers and supervisors are required to promptly report conduct that they believe violates this policy. We are committed to responding to alleged violations of this policy in a timely and fair manner and to taking appropriate action aimed at ending the prohibited conduct. EEO Statement: VetPowered, LLC is committed to providing equal employment opportunities to all employees, applicants, unpaid interns, and volunteers without regard to actual or perceived: race (including hair texture or protected hairstyles, e.g. braids, locks, and twists), color, religion, religious creed (including religious dress and grooming practices), national origin (including language use restrictions), ancestry, citizenship, disability (mental and physical) including HIV and AIDS, medical condition (including cancer and genetic characteristics), genetic information, marital status, sex (including pregnancy, childbirth, breastfeeding, or related medical conditions), gender, gender identity, gender expression, age (40 years and over), sexual orientation, veteran and/or military status, family and medical leave status, domestic violence victim status, political affiliation, and any other status protected by federal, state, or local law. All openings are subject to change without notice, due to the volume of applications / resumes received, we are unable to respond to status inquiries. Please be assured that your information is being properly handled and forwarded to the appropriate hiring staff. If your skills and qualifications meet the needs of the job, you will be contacted. Powered by JazzHR ddHYK2Ttff

Job DescriptionBenefits: • 401(k), • 401(k) matching, • Competitive salary, • Opportunity for advancement, • Layout - field layout., • Rigging., • Experience working with design and erection drawings., • Erector. Including (but not limited to): handrails, guardrails, window grills, etc., • Structural steel columns and beams erection., • Knowledge related to structural steel profiles and processes., • Scissor lift and telehandler experience., • Ability to oversee other ironworkers & delegate responsibilities., • Bilingual (Spanish and English ideally)., • Welding Certificates (D1.1, D1.8)., • Flux Core Welding Experience on Structural/Ornamental Steel (Dual Shield , MIG, NR-232)., • Clean Driving Record., • Oxy Cutting TorchResponsibilities:, • Install Safety Line and Posts., • Erecting Steel Columns, Beams, Girders, Trusses, Joists, Etc., • Installing Stairs, Landings, Rails, & Guardrails. Welding all rails and rail returns., • Able to read, understand, and evaluate shop drawings (blueprints) preferred., • Cut, position, and bold down steel bars to reinforce concrete.Experience:, • Welding (Ornamental - Steel Detail - Erector) - 5+ year welding structural NR-232 (Required), • Heavy equipment operation (Preferred)., • General Construction (Preferred)., • 5+ years of field experience installing structural and ornamental steel (required), • OSHA, Rigger, Fire Watch Experience - OSHA 10 (minimum)., • Valid CA Driver's License with clean record.Compensation: $25 - $40 hourly (depending on experience).

Job Description SUMMARY DESCRIPTION: The Welder/Diver is a diving specialist who is required to maintain proficiency in surface and hyperbaric (wet and dry chamber) welding as well as the skills required by all divers. The position may require worldwide travel on an emergency call out basis. The Welder/Diver will be expected to work in the facility (8 hours), possibly on board ships at sea and possibly on remote job sites, (12 hours). This position reports to the Diving Supervisor. CLASSIFICATION: Non-Exempt (hourly) DUTIES AND RESPONSIBILITIES: • Accomplish all tasks assigned by the Diving Supervisor. If assigned a task for which they do not consider them self qualified by either training or experience, they shall immediately inform the Diving Supervisor., • Read, understand, and comply with all of Phoenix policies and with applicable government regulations as they relate to their qualifications or performance while engaging in diving operations., • Maintain proficiency in welding and NDT procedures as directed by the Diving Supervisor. Perform all welding and NDT per applicable government and commercial requirements., • Maintain all government and commercial weld qualifications in accordance with Phoenix, welding and qualification procedures, training, qualification maintenance, and related program data., • Comply with regulations or instructions concerning the use, maintenance, repair, and testing of all diving equipment provided for the operation., • Report to the Diving Supervisor any recent medical treatment or illness so that a proper determination can be made concerning their fitness to dive., • Immediately report all symptoms or suspected symptoms as early and accurately as possible., • Report to the Diving Supervisor any defect or malfunction of the diving equipment provided for the diving operation., • Follow safe diving practice at all times during the diving operation whether on deck or in the water. Bring to the attention of the Diving Supervisor any questionable items. Be alert for the safety of others., • Assist in the training of new personnel or tenders., • Remain awake and in the vicinity of the decompression chamber for at least one hour following treatment or a hyperbaric exposure outside the no decompression limits., • Know and observe the rules for flying after diving or traveling to altitudes higher than the dive site., • Ensure their diving equipment has been correctly maintained, prepared, and tested before each dive. This requirement should never be delegated to others., • Maintain a diver's logbook, which details all dives, medical examinations, courses taken, and personal equipment maintenance., • Ensure their medical certificates are up to date and recorded in their logbook., • Present their logbook to the Diving Supervisor on every job., • Maintain current certification in first aid and CPR., • Graduate of a professional diving school., • Minimum five years actual underwater-welding experience that can be substantiated by a letter of qualification from a diving company recognized by the industry as having acceptable wet-welding capability., • Must be a certified welder whose qualifications are current in accordance with the American Welding Society (AWS) specification D3.6, class A (dry weld) and class B (wet weld)., • Significant physical effort required. Significant exposure to physical risk., • Ability to pass annual diving physical., • Ability to obtain a U.S. Government security clearance. Phoenix International Holdings, Inc, is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, pregnancy, sexual orientation, gender identity, national origin, age, protected veteran status, or disability status

Job DescriptionBenefits: • 401(k), • 401(k) matching, • Competitive salary About Us: We are a family-owned steel fabrication shop specializing in custom metalwork for commercial, industrial, and residential clients. With a commitment to quality, we take pride in delivering exceptional results. Responsibilities: • Lead, mentor, and train a team of skilled welders and fabricators., • Plan, assign, and direct daily welding and fabrication tasks to meet production schedules and deadlines., • Interpret blueprints, engineering drawings, and specifications to ensure accurate fabrication and assembly., • Perform various welding techniques (MIG, TIG, Arc, etc.) on different materials (steel, stainless steel, aluminum, etc.)., • Fabricate and assemble metal parts, brackets, and structures according to required dimensions and tolerances., • Conduct quality control inspections of finished products, ensuring adherence to quality standards and specifications., • Monitor project progress, track milestones, and report weekly updates to management., • Identify opportunities for process enhancements and efficiency improvements within the fabrication shop., • Ensure all safety protocols and procedures are strictly followed, maintaining a safe and organized work environment., • Estimate time and material costs for custom fabrication projects., • Operate and maintain a variety of welding and fabrication equipment, including torches, power supplies, saws, grinders, and other machine shop tools., • Troubleshoot and repair equipment as needed. Qualifications: • Proven experience as a welder/fabricator, with at least 3+ in a lead or supervisory role., • Expertise in various welding processes (MIG, TIG, Stick, Flux-Core, etc.) and ability to work with diverse metals., • Strong ability to read and interpret complex blueprints, technical drawings, and welding symbols., • Proficient in using measuring devices such as calipers, micrometers, and depth gauges., • Excellent knowledge of metal fabrication techniques, including cutting, shaping, bending, and assembly., • Demonstrated leadership skills, with the ability to motivate, train, and manage a team effectively., • Strong problem-solving abilities and attention to detail., • Commitment to maintaining a safe work environment and adhering to all safety regulations., • Ability to lift and move heavy objects (50+ lbs.) and stand/be active for extended periods., • Strong communication and interpersonal skills., • Valid driver's license (if applicable for occasional travel or material pick-up). Preferred (but not required): • Experience with CNC cutting machines., • Familiarity with lean manufacturing principles. Benefits: • Competitive salary based on experience and qualifications., • Opportunities for professional development and growth., • A supportive and collaborative team environment. To Apply: Please fill out application and we will be in contact with you. PCIW Steel Corp is an Equal Opportunity Employer.

Job DescriptionJoin the VetPowered Team: CNC Machinery Repair Field Service Technician Are you an experienced Field Service Engineer or Industrial Maintenance Technician who enjoys solving complex mechanical and electrical challenges? VetPowered, a leader in advanced manufacturing solutions, is growing and looking for skilled technicians to support our customers in keeping their equipment running reliably and efficiently Primary Responsibilities: • Perform preventative maintenance on CNC and industrial machinery, • Respond to service calls and diagnose issues in the field, • Support customers in minimizing downtime and maintaining reliable equipment operationQualifications:, • Experienced CNC Machinery Repair Technicians, • Certification is a plus, but hands-on experience is highly valued About VetPowered: VetPowered, LLC, named Veteran Owned Small Business of the Year in the United States, is a rapidly growing San Diego based corporation specializing in manufacturing, welding, fabrication, machinery repair and customized training under private and US Government contracts. VetPowered employs a highly trained workforce that uses the latest in cutting edge CNC equipment. VetPowered is dedicated to bringing advanced manufacturing back to America. Key Job Functions: At VetPowered, the CNC Machinery Repair Technician plays a critical role in maintaining and repairing CNC and industrial equipment. This position focuses on troubleshooting, repair, and preventative maintenance to support safe, efficient, and accurate machine operation. The role requires strong technical expertise, problem-solving ability, and the ability to work both independently and with internal teams and customers. Essential Duties and Responsibilities: Machine Installation and Setup: • Install and set up CNC machines according to manufacturer specifications., • Conduct thorough testing and calibration to ensure accuracy and functionality.Routine Maintenance:, • Perform preventative maintenance to reduce downtime and extend equipment life, • Inspect, clean, and lubricate machine components according to maintenance schedulesTroubleshooting and Repairs:, • Diagnose mechanical, electrical, and hydraulic issues, • Perform repairs in a timely manner to support production schedules, • Repair and maintain industrial equipment including shears, press brakes, ironworkers, saws, CNC mills and lathes, plasma tables, lasers, waterjets, and related machinery, • Support equipment transport, rigging, and setup as requiredDocumentation:, • Maintain accurate service records, including maintenance and repair history, • Document machine adjustments, modifications, and configurations, • Track work performed on equipment, vehicles, and assigned assetsTraining and Support:, • Provide guidance to operators on proper machine use and basic maintenance, • Support production teams with technical questions and troubleshootingSafety Compliance:, • Follow all safety procedures during service and maintenance activities, • Identify and address potential safety risks related to equipment operationCollaboration:, • Work with manufacturing, engineering, and operations teams to improve equipment performance, • Communicate clearly with internal teams and customers to support service deliveryService Calls and Expectations:, • Maintain a professional appearance and represent VetPowered appropriately on customer sites, • Communicate clearly with customers regarding scope of work, findings, and next steps, • Prepare quotes, perform work, and coordinate materials as needed to complete service requests, • Deliver consistent, professional, and respectful customer support, • Review service contracts and repair requests prior to and during service executionOther Duties:, • Support shop and field operations including maintenance, cleaning, diagnostics, and equipment rebuilds, • Assist with facility maintenance as needed, • Deliver or pick up parts, materials, and supplies, • Safely use hand and power tools, • Safely lift up to 50 lbs without assistance, • Perform other duties as assigned in support of company operations, • Other duties as required in support of the department and company goals.Qualifications & Work Experience: To perform this job successfully, the candidate must be able to perform each essential duty satisfactorily (with or without an accommodation). The requirements listed below are representative of the knowledge, skill, and/or ability required. • High school diploma or equivalent; additional technical certifications or education a plus., • 5+ years of industry experience working for a large OEM, or a third party service company such as DMG, Nakamura, Methods, Fanuc, DM Solutions, Ellison, Citizen, Makino, Star, Takisawa, Matsuura, Hardinge, Usach, Kellenberger, etc, • Proven experience as a CNC Machining Service Technician or in a similar role., • Strong knowledge of CNC machine operations and troubleshooting., • Proficiency in the use and employment of advanced machine tool calibration systems such as Renishaw QC-20 Ballbar and XL-80 Laser Interferometer., • Proficiency in reading and interpreting blueprints and technical drawings., • Familiarity with various CNC control systems and software., • Attention to Detail- The ability to accomplish a task while demonstrating a thorough concern for all the areas involved, no matter how small., • All In-Brings their whole self to work and giving it their all no matter how difficult the job or situation., • Accountable- Taking personal responsibility for their work, owns mistakes, communicate honestly rather than hiding the truth, does not blame others or make excuses., • Adaptable- Easily adjusts to changing circumstances. Pay: This position includes base hourly pay, with eligibility for overtime and potential incentive compensation. The range of pay for this California-based position is $38.50 - $50.00 per hour. The actual compensation offer will carefully consider a wide range of factors including your skills, qualifications, experience, and location. If your experience differs from what is listed but you believe you can add value to VetPowered, you are encouraged to apply. Benefits and Perks: VetPowered makes available comprehensive benefits the 1st of the month, following the date of hire. Options include Medical (50% employer contribution), dental and vision coverage (100% employer contribution), a 401k program with employer match up to $1,000 per year, 8 paid holidays, and paid time off. While the Company intends to maintain these employee benefits, it reserves the absolute right to modify, amend or terminate these benefits at any time and for any reason. Dress code: Position is provided VetPowered uniforms, and laundry service. Supervisory: None Physical Requirements: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk or hear. The employee frequently is required to stand; sit; walk; use hands to finger, handle or feel; and reach with hands and arms. The employee is regularly required to push, move, lift or otherwise bear 10-30lbs (35-75lb W/M). Applications may include but are not limited to repetitive work using a computer keyboard, mouse and headphones while sitting and/or standing at an assigned work desk area. Work Environment: The employee works in a contract manufacturing facility in an urban industrial neighborhood. Other areas within the facility are mixed use such as administration, classrooms, welding, and machining areas. Employee may have additional environmental hazards such as: chemical, electrical, flammable, or mechanical in nature. E-Verify Compliance Statement: VetPowered, LLC participates in the E-Verify program. We ensure employment eligibility of all employees by using the E-Verify electronic verification system. Policy for Discrimination, Harassment and Retaliation Prevention: VetPowered, LLC is committed to providing a professional work environment free from discrimination and harassment, including discrimination and harassment based on a protected characteristic, and an environment free from retaliation for participating in any protected activity covered by this policy. VetPowered, LLC employees are expected to assume responsibility for maintaining a work environment that is free from discrimination, harassment, and retaliation. Employees are encouraged to promptly report conduct that they believe violates this policy so that we have an opportunity to address and resolve any concerns. Managers and supervisors are required to promptly report conduct that they believe violates this policy. We are committed to responding to alleged violations of this policy in a timely and fair manner and to taking appropriate action aimed at ending the prohibited conduct. EEO Statement: VetPowered, LLC is committed to providing equal employment opportunities to all employees, applicants, unpaid interns, and volunteers without regard to actual or perceived: race (including hair texture or protected hairstyles, e.g. braids, locks, and twists), color, religion, religious creed (including religious dress and grooming practices), national origin (including language use restrictions), ancestry, citizenship, disability (mental and physical) including HIV and AIDS, medical condition (including cancer and genetic characteristics), genetic information, marital status, sex (including pregnancy, childbirth, breastfeeding, or related medical conditions), gender, gender identity, gender expression, age (40 years and over), sexual orientation, veteran and/or military status, family and medical leave status, domestic violence victim status, political affiliation, and any other status protected by federal, state, or local law. All openings are subject to change without notice, due to the volume of applications / resumes received, we are unable to respond to status inquiries. Please be assured that your information is being properly handled and forwarded to the appropriate hiring staff. If your skills and qualifications meet the needs of the job, you will be contacted. Powered by JazzHR mQLtWMxvIv