Offres aircraft maintenance à ManchesterCréer des alertes d'emploi

About the Company - Emirates Engineering is currently seeking experienced Licensed Aircraft Engineers to join our team in Dubai. If you're looking for an exciting opportunity in a dynamic environment, this could be the perfect fit for you. About the Role - As a Licensed Aircraft Engineer at Emirates Engineering, you will be responsible for carrying out routine maintenance tasks and defect rectification of aircraft in accordance with company and regulatory procedures. Key responsibilities include conducting aircraft maintenance and servicing tasks, ensuring compliance with safety and manufacturer procedures, and maintaining effective communication with colleagues and supervisors. Responsibilities - • Perform aircraft maintenance and servicing tasks according to manufacturer and safety procedures., • Ensure assigned zones/aircraft are maintained as per the latest revisions of approved technical publications., • Handle off-aircraft tasks such as spares handling and documentation in compliance with company procedures., • Determine and use appropriate tooling/equipment for tasks, ensuring cost-effective and efficient troubleshooting., • Carry out component changes as necessary, following AMM, IPC, or manufacturer documentation., • Adhere to safety rules and regulations, maintain excellent housekeeping conditions, and report any deficiencies., • Communicate effectively with colleagues, managers, and senior engineers to highlight operational issues and ensure seamless information flow., • Complete detailed reports on service delays, incidents, and accidents to facilitate maintenance planning and improvement., • Manage staff performance through performance reviews, goal setting, and development plans., • Attend training modules as required to enhance skills and comply with CAR 145 requirements. Qualifications - Bachelor's degree or equivalent (apprenticeship) in Engineering. Minimum 5 years of experience in engineering as a certifying staff. About Emirates - At Emirates, we're committed to providing our employees with opportunities to grow and develop in their careers. If you're looking for a challenging and rewarding opportunity in aircraft engineering, apply today for our Licensed Aircraft Engineer role! Please note: This position is based in Dubai, United Arab Emirates. Relocation assistance will be provided..

This presents a unique opportunity for an experienced Process Manager to lead and manage a Production / Manufacturing area, ensuring customer demands and requirements are met by realising the agreed manufacturing plan through the management of all resources and performance levels. Safran - Here, we craft excellence together. At Safran, excellence is a journey - and we'd love you to be a part of it. As a trusted global leader in aerospace, defence, and space, we are proud to be a company where diversity, innovation, and opportunity come together to shape a sustainable future where we can all succeed together through a shared vision About Safran Nacelles: Safran Nacelles is a worldwide leader in aircraft engine nacelles. Our products and services equip all aircraft types; regional, business, short, medium and long-range commercial aircraft. Our expertise covers nacelle design, manufacturing, integration, maintenance and services. We were voted the 28rd best worldwide employer in 2022 by Forbes. Our site in Burnley provides employment to almost 700 people and we are proud to be one of the largest private sector employer in Burnley. Process Manager (Sheet Metal) Burnley Shifts: 75% Nights / 25% Days Night shifts include a 30% shift premium. This presents a unique opportunity for an experienced Process Manager to lead and manage a Production/Manufacturing area, ensuring customer demands and requirements are met by realising the agreed manufacturing plan through the management of all resources and performance levels. We are looking for a passionate Leader to join our Production management team as a Process Manager, responsible for the Sheet Metal department at our Safran Nacelles site in Burnley! You'll lead and manage a team of circa 40 operators, taking ownership of end-to-end delivery within the sheet metal department. This is a critical role in our production operations where you'll take a data-driven approach to optimise the activity of the department as we continue to expand our Production operations. We are currently going through a significant period of growth and transformation at our Nacelles facility, so now is an exciting time to join the management team, and play an active role as we embark on our next stage of development! Key responsibilities: • Ensuring planned KPI's of efficiency and performance are met, • Work with the MEs to introduce and improve operating procedures for all production operations, • Manage the adherence to prescribed procedures to ensure first pass quality meets planned goals, • Ensure standard manufacturing times are achieved and diversions are managed in line with budgetary requirements, • Track competencies of subordinates and provide leadership and development as required to achieve the objectives, • Facilitate complete compliance to prescribed QMS, SMS & 5S & special processes What You'll Bring: • Excellent data skills with the ability to create & interpret data sets within the production area, leading to evidence-based decision making that drives and optimises output, • Experience of driving continuous improvement projects, and team development within a production/manufacturing environment, • Desirable: Experience within the Aerospace industry is desirable, but not essential JBRP1_UKTJ

Arden White are currently recruiting for a Reliability Engineer with a leading aviation company supporting commercial aircraft MRO operations on a global scale. The Reliability Engineer is a technically focused, data-driven engineering role where youll take ownership of reliability performance, lead root cause investigations, and deliver engineering solutions that directly impact fleet availability, cost efficiency, and operational performance. The Reliability Engineerwill act as a key interface between engineering, supply chain, OEMs, and airline customers, driving continuous improvement across component reliability and maintenance strategies. Responsibilities of the Reliability Engineer • Perform in-depth reliability analysis on aircraft systems and components, identifying trends in failures, removals, and operational disruptions, • Lead root cause analysis (RCA) activities on complex component failures, utilising engineering data, shop findings, and operational feedback, • Monitor and report on critical reliability KPIs such as MTBUR, removals per 1000 flight hours, NFF (No Fault Found), and repeat defects, • Develop and implement engineering solutions, retrofit programmes, and reliability improvement plans, • Define and optimise repair schemes, workscopes, and test plans in collaboration with MRO facilities and OEMs, • Conduct technical investigations with component manufacturers and airline operators to drive performance improvements and cost reductions, • Produce technical reports, business cases, and cost-benefit analyses to support engineering decisions, • Present findings and recommendations to senior stakeholders, customers, and suppliers, • Act as the technical representative in customer reliability and engineering review meetings, • Identify recurring issues and implement preventative strategies to improve on-wing time, • Degree (or equivalent) in Aerospace, Mechanical, Electrical Engineering or related discipline, • Proven experience in aircraft reliability engineering, MRO, or component engineering, • Strong understanding of aircraft systems (ATA chapters), component behaviour, and failure modes, • Experience with RCA methodologies (e.g. 5 Whys, FMEA, Fault Tree Analysis), • Ability to interpret technical documentation including CMMs, AMMs, engineering drawings, and OEM data, • Advanced data analysis skills (Excel, reliability tools, or similar), • Confident communicator with experience presenting to customers and senior stakeholders, • Commercial awareness with the ability to balance technical and cost-driven decisionsWhy This Role?, • Join a leading aviation organisation supporting major airline fleets, • Work on high-impact reliability projects with real operational value, • Exposure to global engineering teams and international customers JBRP1_UKTJ

Oaklands Global are currently recruiting Avionics Design Engineers on behalf of a leading global aviation client that provides aircraft engineering, maintenance, and technical support to airlines, lessors, and private operators. These are full-time, permanent roles, based in either the UK or Belfast. We are seeking skilled engineers to manage the design and review of aircraft modifications and repairs in line with EASA Part 21 regulations, within the scope of the client’s approved Design Organisation. The role involves delivering high-quality, efficient, and cost-effective solutions across avionics, structures, and cabin safety disciplines, ensuring both customer satisfaction and regulatory compliance. Responsibilities: • Assist with the preparation and development of design solutions and associated documentation., • Initial review and check of designs and changes for regulatory compliance., • Liaison with customers, suppliers and OEM's, to include onsite visits for aircraft inspection and design validation as required., • Represent the company professionally at a technical level., • Liaison with production and maintenance organisations depending on the project scope., • Support the Sales and Technical Sales teams with the preparation of quotations for customers when required., • Support the Airworthiness team by assisting with the review of audit findings and propose necessary corrective and preventative action(s)., • Positively engage in all design activities and engineering meetings. Requirements: • Strong understanding of EASA/FAA regulations which include Part 21 & EASA design standards., • Current Aeronautical Engineering/Engineering Degree or equivalent demonstrable experience., • 3-5 years of experience in an EASA Part 21J environment (or similar design engineering role)., • Solid working experience of AutoCAD (or other design software) and MS Office., • Strong interpersonal skills and social competence, team player., • Strong communications and presentation skills with both internal and external stakeholders, • Creative and innovative with respect to the engineering solutions required., • Exhibit a high level of personal integrity, thereby maintaining the highest standards of safety and quality under commercial pressure., • Ability to multi-task across multiple projects/customers at any one time., • Ability to work autonomously and lead projects. Why work with Oaklands Global? We are the world’s leading aviation and aerospace recruitment and executive search firm, trusted by the most respected names in the industry to deliver results with integrity, discretion, and excellence. With over 50 years of combined experience, we don’t just fill roles, we shape careers and give our clients a competitive talent advantage. We take immense pride in the quality of our searches and are committed to representing only the very best candidates to the very best businesses. At Oaklands Global, every application is handled with the utmost professionalism and complete confidentiality. If this opportunity interests you, please apply in confidence to Siobhan Miller. Whether or not your profile is shortlisted, you will hear from us, because we believe in treating every candidate with respect and care. We’re not just here to help you land your next role. We are here to elevate your career.

This is an excellent opportunity for a skilled aircraft painter to support. The Aircraft Painter will carry out aircraft surface preparation, painting, and refinishing activities during scheduled base maintenance inputs.

A leading UK leisure airline based in Manchester is seeking an A Licensed Mechanic to ensure aircraft are flight-ready. The role involves performing maintenance tasks, conducting checks, and handling documentation, with previous experience on Boeing and Airbus preferred.

STS Aviation Services is expanding operations in Manchester, United Kingdom, and we are seeking experienced B1 UK CAA Licensed Engineers to join our growing line maintenance team. STS Aviation Services is a leading aircraft maintenance, repair, and overhaul provider operating across the United Kingd

Aircraft Maintenance Technician (AMT).IMMEDIATELY HIRING! A&P Mechanic- Rotor Wing FULL-TIME Opportunity in Manchester, KY.Starting Salary: $63,960 to $93,288 annually.We’re hiring an Aircraft Maintenance Technician (AMT) responsible for the overall maintenance and safety of our fleet within Air E

This role requires a completed aircraft painting apprenticeship and at least 2 years of experience in a base maintenance environment.

A leading aviation maintenance provider in the UK is seeking a Deputy Check Manager to oversee the delivery of maintenance inputs and ensure compliance with regulatory standards.