Trabajos aircraft maintenance en NortholtCrear alertas

Line Up Aviation is working with a leading aviation client who is looking to appoint an A Licensed Engineer to join their maintenance operation at London Heathrow Airport. This is a permanent opportunity working a 5-5-4 shift pattern covering nights. The successful candidate must hold a UK CAA Category A Licence and have hands-on maintenance experience. Role: A Licensed Engineer Salary: Upon Application Location: Heathrow Hours: 40 hours a week - 5,5,4 - Nights Only Responsibilities: Maintain acceptable airworthiness, safety, and performance standards in their delegated areas of responsibility while striving to uphold customer OTP record. To uphold the terms of any authorisation gained as required by the Head of Compliance ensuring the highest quality standards of work carried out by themselves and staff under their control. To ensure the accomplishment of maintenance within responsible area using manpower and resources in the most efficient and cost-effective manner. To aid in ensuring all relevant Station, EASA and CAA regulations are met. To ensure all H & S issues are assessed and brought to the attention of the Station Manager. Responsibility to ensure all company and legal requirements regarding aircraft/component inspection and production documentation are duly complied with. To ensure a good relationship is established and maintained between all line station personnel and interfacing departments. To aid the Customer Airlines on-time performance record. To maintain awareness of all H & S obligations and responsibilities. To aid good communication being established and maintained across their shift and interfacing departments. To keep Customer MOC informed at all times about the serviceability and maintenance condition of the aircraft. Maintain an awareness of the latest Technical Instructions, NTE's and Procedures from all sources. At the beginning of each shift, be conversant with any ongoing problems, and aid the Shift Leader to maintain an accurate shift Log throughout the duty period. To carry out tasks as detailed by the Shift Leader and Station Manager Ensure vehicle and ground equipment checks are completed and certified to comply with CAP 642 requirements.Essential Experience & Qualifications Effective Management, development, and motivation of the team UKCAA A Licence - Essential UK Driving Licence - Essential Responsibility to ensure all company and legal requirements regarding aircraft/component inspection and production documentation are duly complied with. To maintain a working knowledge of maintenance procedures ensuring strict adherence while carrying out line work tasks. To maintain acceptable airworthiness, safety, and performance standards in their delegated areas of responsibility. Responsibility to maintain a high standard of written daily maintenance handovers. To ensure the accomplishment of maintenance and inspection tasks within responsible area using resources in the most efficient and cost-effective manner.If you are interested in applying for this position and you meet the requirements, please send your updated CV to: Susanne Howe-Smith at Line Up Aviation - susanne.howe- Line Up Aviation has carved its own place in the recruitment of Aviation and Aerospace personnel all over the world for more than 30 years. We work with some of the industry's best-known companies who demand the highest standard of applicants. "Follow @LineUpAviation on Twitter for all of our latest vacancies, news and pictures from our busy UK Head Office. Interact with us using the #LineUpAviation tag at anytime! Thank you for your follow

Mechanical Maintenance Engineer A fantastic opportunity has arisen for a mechanical maintenance engineer to work for an internationally renowned engineering solutions provider based around the Hayes area. Salary - £52,500 + Overtime + Great Package (OTE £62k +) Location, commutable from Hayes, Middlesex Skills required for the job Mechanical Maintenance engineer Maintenance and repairs on a range of automated equipment Carry out PPMs Mechanical maintenance Motors, gearboxes, conveyors, FFR etc. Electrical engineering Motors, invertors, sensors etc. Recognised level 3 engineering qualification (Mechanical / mechatronics) Happy to work 12 hours shifts of days and nights Backgrounds considered from Automation, Manufacturing, Navy, Air force, REME, Rolling stock Company benefits £52,500 + Overtime + Great benefits package Good Pension Scheme Medical Excellent training and individual career development plans Commutable from: Hayes, Middlesex Other job titles Maintenance Technician, Multi-skilled maintenance engineer, Maintenance Engineer, Marine engineer, Shift engineer, Aircraft engineer TPBN1_UKTJ

Aircraft Maintenance/IFE: Carry out line maintenance, preventive maintenance and modifications on customer's in-flight entertainment systems, in compliance with UK CAA regulations. Essential aircraft maintenance experience, along with a valid Category A UKCAA aircraft license or equivalent.

We are looking for skilled Licensed Aircraft Engineers with type ratings on aircraft such as A380, A350, A330, A320, 787, 777, and 767. Background in aircraft maintenance, electronics, or avionics preferred.

Job Title: High Level Technician (Rolling Stock) Job Location: Southwest London Hourly Pay Rate: £31.48 PAYE / £ 41.11 Umbrella Shifts: Minimum of 50 hours a week Shift Pattern: Panama . Days and nights Duration: On-going contract Start Date: ASAP Industries considered: Rail, Rolling Stock, RAF, REME, Army, Navy, Marine, Avionics, Rolling Stock, Commercial/Industrial Electrics, Defence, Plant Engineering, SPM, HVAC, and Process Engineering Disciplines considered: Diesel Engine Fitter, Electrical Engineer / Mechanical Engineer, Mechanic, Avionic Technician, Aircraft Engineer, Marine Engineer, Maintenance Fitter, and Breakdown Engineer Client Summary: A world-renowned Rolling Stock vehicle manufacturing, service and maintenance company and is the number one provider of rail solutions in the world. This prestigious company is also the largest rolling stock manufacturer and provider in the UK and employs over 70,000 employees in 60 countries worldwide. Position Summary: Reporting to the Reliability Shift Manager, as part of a small technical team, you will be required to assist the Fleet Operator to undertake / supervise primarily in the corrective mechanical and electrical maintenance, detailed fault finding and repair on the Class 345 Crossrail fleet of trains. Successful applicants will be responsible for ensuring that any maintenance undertaken at the depot is completed in accordance with the company's processes, procedures and comply with all safety regulations. This is Safety Critical environment and all tasks undertaken will need to ensure that the operator can achieve and maintain the reliability and availability targets set for the trains. The candidate will also assist the Operator when failures occur during service, and resolve any issues on the network. The candidate will need to provide high level technical support to the operator which will include: High Level fault finding electrically High Level fault finding mechanically Provide train systems engineering advice for the vehicle as a whole and for the key vehicle systems (such as TCMS - train control system, HVAC, propulsion, brakes, doors, on-train communications etc.) FRACAS - Failure reporting, analysis and corrective action system Produce solutions that provide short term mitigation and long term resolution Monitoring of warranty issues and liaising with supplier technical teams Attending to faulty trains in service, component replacements and modification work Helping customer with root cause analysis using Alstom FRACAS, 8D, PPS methodologies. Ensuring correct replacement parts are sourced Assisting operator in updating of maintenance instructions, overhaul instruction, processes & procedures to optimize maintenance and liaise with Alstom Technical Publications and Central Engineering teams where required Monitoring trains reliability & availability performance and issuing monthly performance reports Monitor of trains in Service using remote monitoring system called Orbita Down load train data from onboard train data recorders using laptops Run diagnostics software to identify faults with various train systems i.e. hydraulic systems, pneumatic systems, train management systems & on board computers. System software updates as required Obsolescence avoidance and mitigation Engineering support for all safety related incidents (NIRs), including representing the Customer with respect to access to Design Authority and equipment OEM's and the production of affirmative closing actions Service Provider representation on Failure Review Boards, feeding back decisions and outputs to the Customer Share experience gained of other fleets across the world which the Service Provider has supplied and/or supports, provision of recommendations and opportunities for design improvements, standardisation and/or modifications. Contribution to Health and Safety on a daily basis. * Strong report writing skills. Qualifications: * Minimum qualification required - NVQ Level 3 in an electrical discipline. Experience required: Experience within Rail desirable Use of Laptop's and diagnostic tools to determine faults Ability to work from maintenance manuals and schematics Experience of Mechanical or Electrical fault finding Experience of Mechanical or Electrical repairs Troubleshooting and evidence gathering. Person profile: You will be a highly self-motivated individual, able to work under your own initiative You will possess excellent communication & interpersonal skills You will need extensive all-round knowledge of Mechanical Engineering You will need extensive all-round knowledge of Electrical Engineering. This could also include the following: Responsible for accurate completion of all paperwork prior to supervisor validation. Undertake technical maintenance to the required standards. Reliability monitoring reporting Data analysing Rip out and replace electrical components Rip out and replace full or part of large wiring looms Re-install wiring Test Continuity Battery Modifications Repairing or installing Wi-Fi systems * Changing relay boxes / Wiper motors If you wish to be considered for this role please send your CV including scanned copies of your qualifications and a scanned copy of your passport to (url removed) OR call (phone number removed). PLEASE NOTE ALL APPLICANTS MUST BE ABLE TO PASS A DRUGS AND ALCOHOL TEST BEFORE BEING OFFERED A POSITION. Please note due to the volume of applications, we can only commit to contact those candidates we deem suitable for the position. However, we may retain your details and contact you in the future should suitable positions arise. Please note the above job specification could be subject

Mechanical Maintenance Engineer A fantastic opportunity has arisen for a mechanical maintenance engineer to work for an internationally renowned engineering solutions provider based around the Hayes area. Salary - £52,500 + Overtime + Great Package (OTE £62k +) Location, commutable from – Hayes, Middlesex Skills required for the job – Mechanical Maintenance engineer • Maintenance and repairs on a range of automated equipment, • Carry out PPMs, • Mechanical maintenance – Motors, gearboxes, conveyors, FFR etc., • Electrical engineering – Motors, invertors, sensors etc., • Recognised level 3 engineering qualification (Mechanical / mechatronics), • Happy to work 12 hours shifts of days and nights, • Backgrounds considered from – Automation, Manufacturing, Navy, Air force, REME, Rolling stock Company benefits – • £52,500 + Overtime + Great benefits package, • Good Pension Scheme, • Medical, • Excellent training and individual career development plans Commutable from: Hayes, Middlesex Other job titles –Maintenance Technician, Multi-skilled maintenance engineer, Maintenance Engineer, Marine engineer, Shift engineer, Aircraft engineer