Cable jobs in MiddlesbroughCrear alertas

We are currently recruiting for a EC&I Department Head on behalf of our internationally operating client within the Testing, Inspection & Certification sector. The suitable person must be a graduate Electrical, Control & Instrumentation Engineer, chartered with a minimum of 10 years experience. This role will also be responsible for supporting the commercial function of the business, being comfortable being in front of clients and developing proposals. Key Responsibilities: • Prepare scopes of work and estimates to support proposals., • Assist in preparing project documents including scopes, schedules and reports., • Deliver the EC&I engineering design scope to budgets and programes., • Co-ordinate/liaise with EC&I and other Engineering disciplines/client/package vendors., • Design authority for all EC&I packages., • Prepare, check and/or approve design calculations, specifications, data sheets, reports, scope of work and drawings to British/International Standards and Codes of Practice., • Design, develop, review and approve electrical and controls (IEC) engineering drawings, specifications and documents in line with national and international standards., • Conduct electrical design calculations and approve calculations conducted by others including earthing, cable sizing, Short Circuit Calculation, Cantilever strength calculation, Battery Sizing calculations, voltage drop, lighting levels, cable tray fill and heat tracing etc., • Prepare and review datasheets and/or procurement packages for electrical equipment., • Preparation of key engineering design documents including SLD’s, Schematic Diagrams, Cable Schedules and Layout Plans., • Liaise with vendors, select and oversee purchase of EC&I equipment & components., • Monitor work for compliance to applicable codes, accepted engineering practices and client standards., • Provide specialist design input to 3D models., • Prepare Technical Analysis of proposals provided by equipment manufacturers and contractors., • Interpret vendor and other discipline drawings/information., • Attend and participate in safety reviews, risk reviews, planning reviews, model reviews and constructability reviews., • Manage conflicting priorities among simultaneous projects., • Identify and raise scope changes., • Comply with Company Quality Manager Systems., • Other professional duties as reasonably required. Key Requirements: • Background in Heavy Engineering/Chemical/Petrochemical/Oil & Gas Industries preferred., • Chartered Engineer required, • Minimum of 10 years of EC&I experience, preferably in oil & gas, chemicals and/or other high hazard process industries., • Appropriate Technical Engineering Degree, • Knowledge of regulations, codes, manufacturing standards, and industry standard practices., • Ability to work in a multi-disciplinary team environment., • Ability to allocate work appropriately to design staff and monitor progress to meet project needs., • Ability to work in both design office and operating plant environments., • Comfortable dealing directly with both Clients and Vendors at all levels., • Knowledge of ATEX and equipment for electrically hazardous areas., • Knowledge or experience of Functional Safety, preferably holding a suitable Functional Safety qualification., • Expertise using MS office suite and knowledge of AutoCAD., • Experience in the use of AVEVA E3D., • Experience in the design of HV and LV Power distribution systems, LHV/LV Switchgear Panels and MCC’s., • Experience in Relay Coordination, Load Flow, Short Circuit and Motor start studies., • Exposure to IEC, IEEE, IS, CBIP & ANSI Standards., • Proficiency in AUTOCAD, DIALUX, CG LUX Software.

New opportunity to join one of the UK’s leading independent bulk liquid storage providers, operating four strategically located terminals across the country. The Company supports a wide range of sectors including chemicals, petroleum, gases, bitumen, and emerging energy markets such as hydrogen, sustainable aviation fuel (SAF) and carbon capture. As a key part of the UK’s critical national infrastructure, Navigator is committed to safe operations, exceptional customer service, and ongoing investment to support future growth and the energy transition. A vacancy now exists for an Electrical Engineering to join the team. Negotiable Salary + Bonus + Private Healthcare The role You will be a Subject Matter Expert for electrical systems and equipment, ensuring safe and reliable operation of our client's electrical systems and electrical assets. Provide technical support, leadership and guidance to projects, operations, and maintenance. Take responsibility for electrical aspects of projects & modifications, developing and reviewing designs and specifications for new electrical systems and equipment. Key Accountabilities: • Responsible for implementation of the companies Electrical Safety Rules and review as required in line with changes in legislation and industry best practise., • Designated Electrical Competent Person under Electricity at Work Regulations for all Navigator terminals. Authorising Engineer., • Competency assessment of site electricians and contractors’ electricians., • Specification, budgeting and scheduling of electrical inspection and preventative maintenance, including HV / LV and ATEX routines to ensure reliable, safe and reliable operation., • Development of HV switching programs, • Responsible for the application of appropriate electrical engineering codes and standards and management of any deviations from standards., • Technical review of designs undertaken by Navigator engineers and design houses., • Prepare cost estimates and business case proposals for electrical equipment/system CAPEX., • Responsible for OPEX and CAPEX budgets Site Electrical Equipment includes: Power Transformers, HV/LV Switchgear Air, Vacuum and Oil, HV/LV distribution, tripping batteries, transformer rectifier units, ATEX and FLP Motors, Motor Starters, HV / LV VSDs, Soft Starts, UPSs, lighting, trace heating, industrial immersion heaters, HVAC, Hazardous Area Cabling/Containment/Junction Boxes, Lightning Protection Systems and Earthing and Bonding Systems. Required Skills, Qualifications & Experience: • Degree educated in Electrical Engineering, • Chartered Engineer Status or working towards Chartership, • Experience managing design/installation/commissioning and maintenance of electrical systems on a COMAH site, preferably in the bulk liquid storage sector, • Significant electrical system design experience, load lists, SLDs, cable sizing, fault level, protection grading studies and motor starting calculations. Lightning protection calculations., • Specification of equipment for installation in Hazardous areas, • Risk Assessment, • Site Commissioning and Troubleshooting experience, • Experience as designated competent person under Electricity at Work Regulations. Experience in roles such as: Authorised Person, Senior Authorised Person, Control Engineer and Authorising Engineer, • Experience in managing ageing assets, • Experience in training and mentoring site electricians, • COMPEX Ex01 – 04, • COMPEX Design (Ex12), parts A & B

Our Client are the only company in the offshore wind sector providing a fully integrated, closed-loop, cable installation solution – covering everything from submarine cable pull in and hook up, to termination, testing, and high-voltage management. Their comprehensive end-to-end approach simplifies offshore wind farm construction, minimises interface risk, and enhances operational certainty for our clients. They are seeking a Bid & Tendering Manager to manage the full life cycle bid process for tenders within the offshore cable installation sector. Profile Responsible for effective bid management solutions, bespoke bid writing and control of the tendering processes. They will lead and manage all aspects of the tendering function throughout, including being the main point of contact, collating all relevant data, writing a competitive bid response, working with the technical & commercials within the business and supporting each stage of the tendering lifecycle. They shall ensure that work is properly allocated within the Tendering team to maximize responses within the required timeframes. Job description • Ensure all proposals and tender opportunities are tracked from opportunity, to delivery, through to post review feedback., • Ensure relevant information is captured from all stakeholders to facilitate the completion of the tender., • Participate in key review meetings / final document review / content sign off and document production meetings., • Write and produce Sales Documents, Pre-Qualification Questionnaire (PQQs), Invitation to Tenders (ITTs) and Presentations in accordance with agreed deadlines., • Manage all clarifications and raise/review where appropriate, • Liaise with client and record all client correspondence, • Develop and manage the end-to-end tendering governance process to ensure that appropriate levels of approval are secured and documented, • Assign tendering workload within the team to ensure tender return deadlines are met. Monitor individual performance and provide feedback., • Support the handover process from contract award to project management, • Participate in project KOM's as necessary, • Write and produce Sales Documents, Pre-Qualification Questionnaire (PQQs), Invitation to Tenders (ITTs) and Presentations in accordance with agreed deadlines., • Internally report, provide feedback and promptly raise issues/risk review, • Effectively communicate timetables and key messages throughout the tender process to all key stakeholders., • Maintain CRM for assigned proposals in coordination with Sales/BD and wider team., • Liaise with sales/marketing/ops teams to produce up-to-date case studies to use within all proposals., • Identify and re-work existing pre-written Bid Library content where relevant keeping it relevant and up-to-date., • Be responsive to the business and P&L sales strategies, supporting as necessary

We are looking to expand our fabrication team at our Port Clarence facility. This role is subject to pre-employment checks, including BPSS security clearance and alcohol and drug screening, as part of Wilton Engineerings onboarding process. Due to the nature of work scopes all applicants must be UK Nationals. All applicants should have completed a recognised apprenticeship. Main Responsibilities Reading & Interpreting Engineering drawings. Measuring and marking out plates and sections for cutting. Operating plate cutting machine where required and trained to do so. Assembling steelwork in line with engineering drawings. Maintaining material traceability during assembly. Aligning and checking tolerances. Tack welding fabricated parts together. Guiding overhead cranes and hoists where trained for moving and assembling plates. Working in confined space scopes where required. Responsible for cable management, general good housekeeping in working area. Working in line with strict adherence to Quality/Health & Safety Procedures and processes, and adherence to legislation. 2026 Pay Rate and Working Hours: 37.5 hours per week basic plus OT £22.56 per hour Dayshift £27.07 per hour Backshift £33.84 per hour Overtime 1 (Monday- Sat 1st 4 hours) £45.12 per hour Overtime 2 (Sat post 1st 4 hrs & Sunday) Benefits: 23 days holiday plus statutory (rising to 25 plus statutory with service) Flexibility to sell back holidays at year end or carry over Life Insurance Salary Sacrifice Pension Scheme Company Sick Pay Based On Service Paycare Health Cashback Scheme Boostworks- discounts platform providing employees with retail, leisure and lifestyle discounts Dayshift Monday Friday from 0700hrs 1500hrs Overtime currently Working till 4pm Monday- Thursday. 0700-1500 Saturday. Circa £1274 for 49 hours Back shift Monday Wednesday from 1530hrs - 0130hrs (Thursday 0100 hrs) Overtime currently- Friday 1530- 2330 hrs. Circa £1268 for 45 hours. TPBN1_UKTJ

Solar Electrician Middlesborough £350 Per Job + Contract Role + Local Work + IMMEDIATE START + Flexible Schedule A great opportunity for Solar Electricians or subcontractors looking to pick up consistent, well-paid work installing battery storage systems on existing domestic solar PV setups. With up to two jobs per day, this role is perfect for engineers wanting to top up their diary with extra days while still earning excellent rates. Batteries are delivered directly to site, and the contractor will supply basic materials such as cable and isolators, fully reflected in the day rate. Enjoy local work, immediate starts and a straightforward contract setup with ongoing demand. APM is supporting a rapidly expanding renewables partner with a strong pipeline across Middlesborough and surrounding areas. With simple job scopes, guaranteed daily opportunities and the backing of a well-organised team, this is an ideal role for experienced Solar Electricians wanting stability without the pressure of full-time commitments. Long-term work is available for those who want it, with full flexibility for those who prefer to choose their days. Your role as a Solar Battery Installer will include: * Installing battery storage systems on existing domestic solar PV systems * Completing 1-2 installations per day depending on workload * AC/DC connections, commissioning and system checks * Local travel across Southampton and surrounding areas The successful Solar Battery Installer will need: * Proven experience with Solar PV and Battery Storage installation * NVQ Level 3, 18th Edition, Inspection & Testing 2391 (preferred) * Own van, tools and installation materials (cable, isolators, consumables) * Ability to work independently and deliver clean, compliant installations Please apply or call Tommy for immediate consideration Keywords: solar, solar pv, pv installer, battery storage, battery installer, bess, inverter, electrician, electrical improver, solar electrician, solar technician, ac, dc, commissioning, domestic solar, renewables, renewable energy, retrofit, electrical installation, field engineer, service engineer, subcontractor, installation engineer, energy storage, solar upgrades, battery retrofit, ups systems, pv systems, electrical maintenance, renewables, Middlesbrough, Stockton-on-Tees, Thornaby, Ingleby Barwick, Billingham, Redcar, Hartlepool, Darlington, Newton Aycliffe, Eaglescliffe, Yarm, Guisborough, Saltburn-by-the-Sea, Skelton, Marske, Eston, Norton, Sedgefield, Peterlee This vacancy is being advertised by Accelerated People Management Ltd. The services of Accelerated People Management Ltd are that of an Employment Agency. Accelerated People Management Ltd can only accept applications from candidates who have a valid legal permit or right to work in the United Kingdom. Potential candidates who do not have this right or permit, or are pending an application to obtain this right or permit should not apply as your details will not be processed. TPBN1_UKTJ

Electrical Engineer Our client is looking for an Electrical Engineer (subject matter expert for electrical systems and equipment) to join their engineeringteam. The roleis based in the North East (Teesside) with travel to other sites. Key Accountabilities Provide technical support, leadership and guidance to projects, operations, andmaintenance. Competency assessment of site electricians and contractors electricians. Specification, budgeting and scheduling of electrical inspection and preventative maintenance, including HV / LV and ATEX routines to ensure reliable, safe and reliable operation. Development of HV switching programs Responsible for the application of appropriate electrical engineering codes and standards and management of any deviations from standards. Prepare cost estimates and business case proposals for electrical equipment/system CAPEX. Perform electrical calculations, prepare drawings and technical specifications. Perform electrical network modelling using software tools (e.g. ETAP) Provide technical support in troubleshooting and conduct Root Cause Failure Analysis. Report monthly progress on electrical engineering & maintenance KPIs Provide input on method statements and risk assessments. Ensure that contractors work to the site procedures and in line with the UK safety management systems Skills, Qualifications & Experience: Degree educated in Electrical Engineering Chartered Engineer Status or working towards Chartership Experience managing design/installation/ commissioning and maintenance of electrical systems on a COMAH site, preferably in the bulk liquid storage sector Significant electrical system design experience, load lists, SLDs, cable sizing, fault level, protection grading studies and motor starting calculations. Specification of equipment for installation in Hazardous areas Site Commissioning and Troubleshooting experience Experience as designated competent person under Electricity at Work Regulations. Experience in roles such as: Authorised Person, Senior Authorised Person, Control Engineer and Authorising Engineer Experience in managing ageing assets Experience in training and mentoring site electricians CompEx Ex01 04 CompEx Design (Ex12), parts A & B Working Knowledge of applicable codes and standards such as BS 7671 and BS EN60079. Knowledge and skills will cover hydrocarbon & chemical storage, process safety and knowledge of UK specific regulations such as Electricity at Work Regulations, DSEAR, PUWER, CDM and COMAH. Dueto thehigh volumeof candidates responding to our adverts unfortunately we are not always able to provide individual feedback. If you don't hear from us within the next ten days, please assume you have been unsuccessful on this occasion. We will however keep your details on file and you may be contacted about other opportunities in the future. TPBN1_UKTJ

We are looking to expand our fabrication team at our Port Clarence facility. This role is subject to pre-employment checks, including BPSS security clearance and alcohol and drug screening, as part of Wilton Engineerings onboarding process. Due to the nature of work scopes all applicants must be UK Nationals. All applicants should have completed a recognised apprenticeship. Main Responsibilities Reading & Understanding procedures relevant to work Ensuring correct pre task requirements are in place Aware of material to be welded, correct consumable to be used, pre heat required and measured Ensuring all welds are within limits required Clean weld area on completion ready for acceptance by inspection / NDT Familiar with arc-air gouging. Guiding overhead cranes and hoists where trained for moving and assembling plates Responsible for cable management & keeping work area clean and tidy. Working in line with strict adherence to Quality/Health & Safety Procedures Capable of Confined Space Work Adheres to project security requirements Welder Qualification Required or Prepared to Test to: 3G & 4G single sided plate Butt weld & a supplementary 2F fillet 6G structural multi run fillet 2026 Pay Rate and Working Hours: 37.5 hours per week basic plus OT £22.56 per hour Dayshift £27.07 per hour Backshift £33.84 per hour Overtime 1 (Monday- Sat 1st 4 hours) £45.12 per hour Overtime 2 (Sat post 1st 4 hrs & Sunday) Benefits: 23 days holiday plus statutory (rising to 25 plus statutory with service) Flexibility to sell back holidays at year end or carry over Life Insurance Salary Sacrifice Pension Scheme Company Sick Pay (Based on Service) Paycare Health Cashback Scheme Boost works- discounts platform providing employees with retail, leisure and lifestyle discounts Dayshift Monday Friday from 0700hrs 1500hrs Overtime currently Working until 1600 hrs Monday Thursday.0700 hrs to 1500 hrs Saturday. Circa £1274 for 49 hours. Back shift Monday Wednesday from 1530hrs - 0130hrs (Thursday 0100 hrs) Overtime currently - Friday 1530 hrs - 2330 hrs. Circa £1268 for 45 hours. TPBN1_UKTJ

Adding Terminals to Cable ends. Ideal Candidate must have over 2 years experience in cable soldering or 2 years plus in Prototype Wiring.

Role Summary We are currently recruiting a Jointer to be part of a team undertaking cable jointing works on paper/lead and polymeric cables along with fitting/ wireman duties to support the upgrade and replacement of substation equipment in a manner that delivers safe, high workmanship quality and

As a Cable Jointer at UKPS, youll work alongside other Cable Jointers a. Cable Jointer (LV) BristolJoin a leading utilities company that champions innovation and service excellence. Our Operations team is growing, and we're excited to welcome a talented Cable Jointer to join us.

Cable AssemblerOverviewWe are seeking a detail-oriented and collaborative Cable Assembler to join our manufacturing team. As a Cable Assembler, you will be responsible for assembling technical components according to specifications, performing quality control checks, and adhering to health and safet

Solderer/ Cable Moulding TechnicianOur client, a leading provider of high-quality sonar technology solutions, are currently seeking a Skilled Moulding Technician to join their team.

Cable Jointers are at the heart of our business. We are actively seeking a skilled and proficient Cable Jointer to join our team, serving Kent and its neighbouring areas. As a Cable Jointer, you'll oversee LV Jointing operations, ensuring the safe and expert installation of jointing activities acros

An underground utility contractor based in the UK is seeking a skilled operator for hydraulic excavation equipment.The ideal candidate will assist in constructing and upgrading underground utilities while adhering to safety standards.Experience with directional bore drills and a Class A CDL is neces

A global infrastructure company is seeking an HV Cable Design Engineer in London. The successful candidate will lead the design delivery for cable system projects up to 400kV, ensuring compliance with engineering standards and regulations. The role requires a degree in Electrical Power Engineering a

As a Senior Cable Advisor, you will act as a trusted technical authority across the full cable installation lifecycle, supporting clients from planning through execution. Senior Cable Engineer / Cable Advisor. You are a senior professional who combines deep offshore cable experience with clear commu

A leading engineering consultancy in the UK is looking for Cable Design Engineers at various levels (Engineer to Principal Engineer) to work on high-voltage cable projects. Candidates should have proven experience with AC cable systems and knowledge of relevant CAD tools, like CYMCAP.

You are an experienced HV Cable Engineer with 7+ years of experience in the following topics: cable design, new developments, specifications, production documentation, test programs, ITP documentation, manufacturing, quality surveillance, cable handling, audits etc. Specify cable design & test requi

Senior/Principal Cable Route Engineer page is loaded## Senior/Principal Cable Route Engineerlocations: GB. You will take the lead in developing AtkinsRéalis’ offshore cable routing capabilities, such as by proposing technical capability enhancement activities, undertaking business development a

This position is critical for enhancing operational certainty and minimizing risks in offshore cable installation projects.

A leading company in event equipment based in the UK is looking for a Warehouse Assistant to support the dispatch of hire equipment.The successful candidate will develop safe working practices and maintain an organised warehouse environment.Key responsibilities include equipment preparation, stock m

National Grid is hiring a Cable Engineering Manager accountable for the overall design of HV cable systems across our OHA projects. This role involves managing a team of engineers to provide design governance across all cable contractors, including but not limited to cable OEMs, civil works contract

A leading cable assembly solutions company is looking for a Sales Field Engineer in the UK to drive sales growth and provide technical support for interconnect solutions. Join us to make a difference in the cable assembly industry.

Join a dynamic team in London with a hybrid work model, contributing to impactful cable system projects within the energy transition sector. Ideal candidates should possess strong experience in HV/EHV transmission with a solid understanding of cable routing and system analysis. A global infrastructu

A leading engineering firm in the UK is looking for a Principal HV Cable Design Engineer to lead engineering deliverable assurance and enhance technical credibility with clients. This role requires extensive HV Cable design experience, knowledge of Health and Safety in OHL construction, and fluency

A leading UK infrastructure firm is seeking an experienced EHV Cables Construction Manager to oversee cabling projects across England. Ideal candidates will have a technical diploma, experience in cable projects, and a strong background in project management.

A leading energy company is seeking a Cable Engineering Manager to oversee the design of high voltage cable systems.

A leading independent engineering firm in the UK is seeking a Senior Project Manager to lead major 132kV cable infrastructure projects.

A premier engineering firm is seeking an experienced Data Engineer and Fibre & Data Cable Installer for a short-term contract in Liverpool.

Our Principal Electrical Engineer - Cable Systems will have the ability to work on a variety of project scopes including offshore wind (fixed and floating), and subsea cables (transmission and distribution) projects. Undertake hands-on engineering including cable sizing, rating studies, thermal mode

A leading engineering consultancy in the UK seeks a Principal Cable Design Engineer to provide technical leadership on HV cable projects in a hybrid environment. Suitable candidates will have a Bachelor's degree in Engineering and extensive experience in HV cable design for both onshore and offshore

Maternity Cover Position (12 Month FTC).Working Hours: Monday to Friday 08:30 – 17:00 (37.Salary: £24,000 – £26,000 (dependant on experience).As part of our partnership with Openreach, which operates the UK’s largest fibre broadband network, we are committed to delivering quarterly target ho

Application of broad practical knowledge to cable design & produces – Cable installation design including cable routing layouts, trench & trenchless section layouts, cable bonding & phasing, cable pulling, termination and jointing arrangements. Hands on experience/working knowledge of CYMCAP softw

You will deliver a safe, proactive, flexible and comprehensive technical service to ensure the highest standards of quality and reliability for our clients' cable harness systems. Manufacture, rework, or repair cable harnesses on customer equipment using approved procedures, customer or internal dra

A global energy consultancy is seeking a Principal Electrical Engineer specializing in Cable Systems to work on offshore wind and subsea cable projects.

Prepare plant and equipment technical specifications, power cable route specifications, tender specifications, technical and progress reports. Extensive experience in a cable‑related role supporting FEED design and/or detailed design. Able to manage and lead HV/EHV cable designs at all project sta

A leading UK infrastructure firm is seeking an EHV Cables Construction Manager to oversee cable construction projects across England. Candidates need significant experience in cable projects, safety certifications, and a commitment to professional development.

Experienced user of CYMCAP for cable system design. Experience designing HV and EHV cable systems for both HVAC and HVDC systems. Senior Associate Director HV Cable System Design Engineer.

Extensive experience in the design, manufacture and test of HV cables for use in HVAC and desirable - HVDC projects both onshore and offshore; including HV cable system design and ratings (CYMCAP). An understanding of IEC cable standards and CIGRE technical policies, its suite of technical specifica

Experienced user of CYMCAP to support cable system design. You will lead the design delivery for Cable System Projects up to 400 kV, from the tendering stage through to project handover. Prepare plant and equipment technical specification, power cable route specifications, tender specifications, t

A prominent engineering company is seeking a Cable Installation Engineer to manage offshore cable projects in the Greater London area. The ideal candidate will have a strong engineering background, significant offshore wind industry experience, and expertise in submarine cable operations.

A leading engineering firm in Greater London is seeking an experienced HV Cable Design Engineer.

Testing and certification using power meter and OTDR (where applicable).

A leading engineering consulting firm is seeking an experienced HV Cable Design Engineer in the UK.

Engineering background with strong knowledge in submarine cable design, cable fabrication, layout and design of offshore cable decks, cable pull‑in operations, seabed assessment and preparation, offshore cable laying and cable protection, and termination and HV testing procedures. Lead the technic

A major data centre contractor is seeking experienced Contract Cable Technicians for long-term projects across multiple locations in the UK.