Trabajos cad en ChesterfieldCrear alertas

Job Type: Full time We have an exciting opportunity for a Senior Architectural Technician to join our team within Vistry Manchester & Cheshire East, at our Warrington office. As our Senior Architectural Technician, you will oversee and produce working drawings and to co-ordinate the procurement and distribution of technical information. We value in-person collaboration and team culture, but were also committed to supporting flexible working where possible. We encourage you to raise any specific requirements during the interview process so we can explore how this could be accommodated. • Competitive basic salary and annual bonus, • Company car, car allowance or travel allowance, • Salary sacrifice car scheme available to all employees, • Up to 39 days annual leave plus bank holidays, • 2 Volunteering days per annum, • Private medical insurance, with employee paid cover, • Enhanced maternity, paternity and adoption leave, • Competitive pension scheme through salary sacrifice, • Life assurance at 4 x your annual salary, • Share save and share incentive schemes, • Christmas company shutdown, • Employee rewards portal with many more benefits, • Behave in line with our company values Integrity, Caring and Quality, • HNC in Building Studies or similar., • Extensive experience of working in an architectural technical design environment., • Knowledge of Building Regulations and associated legislation., • Knowledge of timber frame design and construction methods. Desirable.. • Knowledge / experience of Viewpoint ForProjects., • Knowledge of Revit and BIM., • To be the main contact with all departments ensuring Procurement Programmes and targets are met, attending meeting as required., • Produce and revise working drawings on CAD system for inclusion in Working Drawing (DCO) packages / VO issues., • Liaise with specialist suppliers regarding the design of timber frame, roof trusses, beam & block floors, heating systems, TJM layouts and fitted kitchens, and ensure drawings are correct prior to issue., • Collate Working Drawing (DCO) packages., • Produce conveyance plans and other CAD information required by other departments., • Make Building Regulation applications and liaise with Building Control Officer as required to obtain approval., • Liaise with external consultants / team members / site staff to progress Working Drawing (DCO) packages or resolve queries., • Attend site to resolve queries or attend meetings., • Ensure that relevant departmental procedures are complied with., • Ensure that information produced / issued complies with Building Regulations, NHBC standards and any other relevant standards., • Assist Architectural Technicians in the performance of their tasks., • Produce drawings for planning purposes and follow up liaison with Planners to discharge conditions. We build more than homes, were making Vistry. Being a responsible developer and award-winning employer means we live each day through our ethos - doing the right thing. Our behaviours reflect this, as well as our values of integrity, caring and quality. Shaping all we do; they empower us to develop sustainable communities across affordable and private housing. We work in a partnership-led way, and youll recognise our renowned brands Bovis Homes, Linden Homes and Countryside Homes. Together with Vistry Works, our manufacturing operation, and the functional support of Vistry Services, were a proud UK Green Building Council member, UK top five housebuilder with a five-star House Builders Federation (HBF) customer satisfaction rating, and winner of many awards including Top Employer, Global Top Inspiring Workplaces, and Best for Talent Attraction and Outreach. Join us in making Vistry. #LI-AD1

Job Type: Full time We have an exciting opportunity for a Design Administrator to join our team within Vistry Works, at our Coalville or Warrington factory. As our Design Administrator, you will be responsible for supporting the design and technical department, working closely with both the internal / external design teams and the production teams for all factories. We value in-person collaboration and team culture, but were also committed to supporting flexible working where possible. We encourage you to raise any specific requirements during the interview process so we can explore how this could be accommodated. • Competitive basic salary and annual bonus, • Salary sacrifice car scheme available to all employees, • Up to 39 days annual leave plus bank holidays, • 2 Volunteering days per annum, • Private medical insurance, with employee paid cover, • Enhanced maternity, paternity and adoption leave, • Competitive pension scheme through salary sacrifice, • Life assurance at 4 x your annual salary, • Share save and share incentive schemes, • Christmas company shutdown, • Employee rewards portal with many more benefits, • Behave in line with our company values Integrity, Caring and Quality, • Proficient in MS Office programmes, • Attention to detail, • Ability to interpret construction drawings., • Quick and eager to learn, with a focus on continuous development., • Ability to communicate well with individuals at all levels, • To have a positive and flexible approach to work, integrate with the existing team., • Good communication and interpersonal skills with the ability to effectively liaise with other departments., • Prioritise tasks whilst maintaining a high standard., • Good organisational skills. Desirable • Technical or design office experience or other related discipline would be beneficial, • CAD skills., • Previous experience in Residential Housing sector, • Knowledge and understanding of Viewpoint-for-Projects, • Understanding of timber frame construction components., • The role of the Design Assistant is to ensure work is issued to the factory as required, in line with factory and site schedules, working closely with the factory production team., • Checking and coordinating drawing packs and electronic files for factory release, and coordinating site drawing packs for issue to the site contracts team, • Uploading and maintaining Bills of Material updates in D365., • Assisting uploading and managing drawings within Viewpoint or other shared locations used by the design team., • Attending regular production meetings as required., • Undertaking other tasks as directed by the Design Manager to support the wider design team. We build more than homes, were making Vistry. Being a responsible developer and award-winning employer means we live each day through our ethos - doing the right thing. Our behaviours reflect this, as well as our values of integrity, caring and quality. Shaping all we do; they empower us to develop sustainable communities across affordable and private housing. We work in a partnership-led way, and youll recognise our renowned brands Bovis Homes, Linden Homes and Countryside Homes. Together with Vistry Works, our manufacturing operation, and the functional support of Vistry Services, were a proud UK Green Building Council member, UK top five housebuilder with a five-star House Builders Federation (HBF) customer satisfaction rating, and winner of many awards including Top Employer, Global Top Inspiring Workplaces, and Best for Talent Attraction and Outreach. Join us in making Vistry. #LI-WS1

Our client, a leading carbon fibre engineering company supplying components worldwide directly into Formula One, Motorsport, Aerospace and Defence customers, requires an experienced composite inspector to join its team in a permanent position. Responsibilities: Verify dimensional accuracy of parts, tools or Jigs to drawing/CAD used in the manufacturing process and communicate with internal manufacturing teams and external suppliers in a clear and concise manner. Verify visual & aesthetic quality of carbon fibre and natural fibre composites. Support Root cause analysis, with clear and thorough inspection feedback. Support the Quality Manager in the efficient running of the QMS System. Promote the companys quality ethos and proactively participate in initiatives to improve quality and efficiency. Requirements: Experience working in a composite manufacturing environment. High attention to detail. A driven, self-motivated individual with good organizational and problem-solving skills. Ability to read and understand technical drawings and composite layup tables and manuals. Understand and compare product against visual standards. Adherence to ISO9001:2015 standards. Scanning arm experience. JBRP1_UKTJ

Location: Victory Road, Derby, DE24 8EL Job Type: Full Time, Permanent Hours: 38 hours per week, Mon-Fri. (hours to be discussed at interview can be flexible) Salary: £17.00 - £20.00 per hour (dependant on experience and skills) plus Overtime Benefits: Company Pension - matched contribution scheme, Westfield Health care plan - after 3 months. Life Assurance. 25 days paid annual leave plus all UK Statutory Bank Holidays. We have kitchen facilities on our site and provide free tea and coffee for our employees. Do you want to continue your training and development? At RH Aero we are committed to supporting you in your continuous technical and professional development to enable you to keep your skills and knowledge up to date and to support you in your advancement within the business. About RH Aero: RH Aero is setting the standard for aviation support equipment and services. Through our industry-leading businesses - Rhinestahl and HYDRO Systems - we deliver capability across custom-designed Ground Support Equipment, OEM-licensed engine and airframe tooling, 26 global service centers and innovative engineered solutions for OEMs, MROs and Operators worldwide. RH Aeros global headquarters are in Mason, Ohio, USA, For further details visit our website. Our UK business specialises in the production and delivery of aerospace tooling. Manufacturing and sourcing tools for engine and airframe build and repair, working with high profile OEMs to deliver quality products day in, day out. This is an exciting time to join our business, having experienced significant growth within our manufacturing business, we will be expanding and developing our UK based capabilities further during 2026. About the role: We are looking for an experienced individual who will play an integral part in our planned expansion of the machine shop and business. You will also be required to train other members of our expanding team. This is a fantastic opportunity for an individual who wants to develop their skills further working in a fast paced environment. The role of the CNC Programmer/Operator will involve production of precision bespoke 1 off tools using a variety of machines both manual and CNC to customer specification as workload demands. Responsibilities: To produce a high quality product operating a range of CNC machines and CNC lathes ensuring quality workmanship at all times, programming, setting and operating the CNC Machines. To maintain and improve productivity, work in line with company procedures and machine capability to ensure production deadlines are met. Programme, set and operate CNC machines. Must have programming experience using Siemens ShopMill/ ShopTurn .Use of oneCNC would be advantageous. Operation of manual milling, turning and drilling machines when required. Manufacturing of jigs and fixtures. Ability to read and understand engineering drawings and use the information to create programmes to machine details. Share knowledge and provide training to less experienced members of the team. Assist team leader in estimating manufacturing times and capabilities for quotation purposes. Ensure that production quality and output levels are optimised at all times. About you: Proven experience of CNC programming, setting and operating Proven experience of manual milling and turning machines Must have ability to programme using ShopMill/ ShopTurn on Siemens 828D systems. Experience using Heidenhain control systems and/ or oneCNC CAD/CAM software would be advantageous. Willingness to travel in UK and worldwide as required on occasion. Valid driving licence and passport is desirable. You may have experience of the following: Toolmaking, CNC Machine Operator, Machinist, Engineer, XYZ, Heidenhain, HAAS, Milling, CNC Turner, Tool Setter, Cutting, Manufacturing, Engineering, CNC Setter, CNC Machinist, CNC Turner, CNC Miller, Precision Machinist, Toolmaker, CNC Setter Operator, Machine Shop Technician, Aerospace Machinist, Manufacturing Technician. etc. You may have some or all of the above skills and experience, but full training will be provided to the successful candidate. REF-228 919 JBRP1_UKTJ

Consortium Professional Recruitment are pleased to be working with our client to recruit a CAD Team Leader for a key engineering role based in Derby. This is a fantastic opportunity for an experienced engineering CAD professional to lead a skilled drawing office team responsible for delivering high quality technical outputs across complex engineering projects, particularly within the overhead line... JBRN1_UKTJ

Land Surveyor (AutoCAD) Derby, England £40,000 - £50,000 + Training + Progression + Overtime + Pension Are you a Land Surveyor or similar, having a background within Surveying/Construction/Groundworks/Civil Engineering sector or a related field, having a proficiency in AutoCAD, looking to join a well-established, widely respected Engineering Consultancy, taking the Surveying Sector by storm, quickly making a name for themselves as industry leaders? Do you want to become a key member in a team of highly skilled sector specialists, recognised nationwide for their best-in-class service and premium quality workmanship on every project they undertake, offering top-of-the-line technical development and in house training opportunities, as well as impressive career progression pathways? On offer for the successful Land Surveyor or similar is the exciting opportunity to join a close-knit, rapidly-growing company, recognised nationwide for their unrivalled professionalism as well as their premium quality service and workmanship in every project they undertake, rich with over 10 years of history as a company, and over 30 years of knowledge and skill. Presenting itself is the opportunity to become a key member in a team of industry experts, joining a company full of industry insight, offering not only impressive in house training and technical development, but also scalable career progression opportunities, particularly with the companies continued growth. In this role, the successful Land Surveyor or similar will be responsible for working on a wide variety of projects, undertaking numerous land surveys/setting out etc at any time. You will also be responsible for the design and development of both technical drawings and detailed maps for site setting out etc, as well as making adjustments to pre-existing drawings, ensuring they adhere to both company standards as well as customer requirements. In addition, you will also be responsible for Architect, Engineer, Customer and Client liaison, making certain design requirements are understood, offering technical advice/support as and when required. On top of this, you will also be responsible for assuring you are compliant with project timelines, working both autonomously as well as part of a team. Finally, you will be responsible for attending site visits where necessary. The ideal Land Surveyor or similar will have a background within Surveying/Construction/Groundworks/Civil Engineering sector or a related field. In addition, you will also have prior practical experience working with a variety of CAD packages - having a specific proficiency within AutoCAD. On top of this, you will also have a previous knowledge of Microsoft Office software packages (word, excel etc). Also, you will have strong organisational and communicational skills - with the confidence to liaise with a range of Third Parties. Finally, you will also hold a full, valid UK driver's license. The Role: • Design and development of technical drawings for site setting out etc, • Architect, Engineer, Customer and Client liaison, making certain design requirements are understood, • Attending site visits where necessary The Person: • Holds a degree within Engineering/Architecture or a related field, and/or a background within Surveying/Construction/Civil Engineering sector or a related field, • Proficiency within AutoCAD, • Hold a full, valid UK driver's license Reference: BBBH25823 Keywords: Engineer, Engineering, Land, Geographical, Topical, Environmental, Surveying, Land Surveying, CAD, AutoCAD, Survey, Construction, Technician, Architect, Engineering, 2D, 3D, Derby, England If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV. We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered renumeration will be dependent on the extent of your experience, qualifications, and skill set. Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website. JBRP1_UKTJ

A brilliant opportunity for a experienced Design Manager with a strong technical background in Industrial Refrigeration. This position is part of our clients growth plans and would be a great time to join the business and make this your own. To design and propose industrial refrigeration systems for food manufacturing facilities and logistics cold storage centres. Detailing costs and designs to customers while meeting legislative and customer-specific requirements. To create comprehensive designs from initial briefs and/or drawings, whilst adhering to the latest company and industry standards. Produce detailed design work, consisting of but not limited to: cold room and facility heat load calculations, equipment selections, pumped circulation system design, P&ID development and approvals, concept design presentations, sales stage design applications, engineering specification sheets, pipework isometric drawings, and pipe sizing for ammonia refrigeration systems. This is a remote working role, but attendance at the Leicester office will be required as will site visits, surveys, and client presentations. Main Responsibilities Carry out site surveys where required Generate and update enquiry bank Attend customer scoping and design meetings where required Produce initial outline design/scope Produce Design File (electronic or hard copy) in line with ISO 9001 standard Produce detailed design post sales stage and convert into live project for delivery team Conduct heat load calculations, produce engineering sheets and pipework isometric drawings, equipment selections and pipe work sizing Produce supplier/sub-contractor enquiries for quotations Produce data for Design of Contracts project handover including: Equipment/supplier/sub-contractor procurement schedule, identify PED category of system and inform compliance team if CAT 4, calculate system refrigerant charge, produce high level program of works and high level phasing with support of delivery team Mark up drawings and issue to CAD department to produce Attend site at least once during project installation period, to carry out design review Assist PM during delivery phase for design queries Take on projects as and when required and see them through to successful completion Financial Produce estimates in line with customer budgets and to agreed company margins Produce formal scope of works and formal quotations Assist CM with project variation design and costs JBRP1_UKTJ

You may have experience of the following: Technical Data Coordinator, Manufacturing Data Technician, CAD Technician, ERP Data Administrator, Production Engineer, Process Documentation Specialist, CNC Programmer, Manufacturing Engineer, Technical Administrator, Product Designer. The role of Master Da

M&E Manager Derby - M&E Manager c£50k - £62k neg dep exp + car allowance + benefits Our highly successful niche sector client based in Derby offers a range of highest quality technical solutions that encompass high-integrity control and monitoring systems to blue chip clients worldwide, and as a result of continued success and an ongoing planned programme of strategic growth, they are now seeking to recruit an experienced and professional M&E Manager to oversee the supply chain operation and support the planning, procurement and delivery of M&E works across a range of projects and bids. To be considered for this varied and challenging M&E Manager role, you will be a well organised team player who demonstrates exceptional attention to detail and commercial awareness and a high level of electrical infrastructure and electrical principles knowledge, holding a relevant qualification (HND or above) in electrical engineering or equivalent, whilst also having the appropriate skills and experience to undertake the following (including but not limited to) duties: Tender Stages: • Co-ordinating and attending site surveys at both tender and project delivery stages., • Evaluating M&E supplier proposals for scope completeness, risk, programme and commercial alignment, • Supporting the bid team with pricing strategy, risk allowances, qualifications and clarifications for M&E scope. Project Delivery for M&E Works: • Producing technical and delivery requirements for supplier quotations and conducting evaluations and supporting site surveys as required to inform delivery strategy., • Attending design meetings (along with design sub-contractor as required)., • Providing technical and delivery support to the Site Supervisor in site progress meetings and assisting the Project Managers in the planning, execution and completion of the M&E sub-contract works, and managing supplier progress and performance, ensuring alignment with project plans., • Managing and reviewing the production of supplier designs, • Managing M&E FAT's and reviewing all relevant documentation., • Managing the co-ordination of designers and installers (which may be different sub-contractors), • Reviewing site test documentation and RAMS for suitability, completeness and alignment., • Managing site supervisors for M&E works and all aspects of installation handover, as well as all associated members of the team including Commissioning Engineers, Electrical Design Engineers and CAD Engineers. It is envisaged that the successful M&E Manager candidate will be qualified to at least HND Electrical Engineering or above and demonstrate at least 4 years previous experience in a similar role with a high level of familiarity of electrical infrastructure and electrical principles normally associated with projects in transportation, power or comparable sizable projects from other sectors and extensive experience of supporting bids or preconstruction activities. With a good level of IT proficiency (Excel and Word mandatory) and be legally permitted to work in the Republic of Ireland without restriction, you will be comfortable working under pressure and to tight deadlines with excellent attention to detail and the flexibility and adaptability to manage a range of different tasks and to work extra hours as required. Contact the Electrical Team at Premier Technical Recruitment on 01827 68400 or email your cv in confidence to for further details. JBRP1_UKTJ

My client in the Dronfield area require an experienced Sales Estimator. The successful candidate will play a key role in preparing accurate quotations for laser cutting, folding, fabrication and welding across a wide range of industries. This is an excellent opportunity for someone with strong analytical skills and manufacturing knowledge to contribute to a fast-paced and customer-focused environment. Duties of the Role Review customer drawings, specifications, and technical information to prepare accurate cost estimates and quotations. Calculate material, labour, finishing, and subcontract costs for sheet metal fabrication projects. Liaise with suppliers and subcontractors to obtain competitive pricing for materials and outsourced processes. Work closely with production and engineering teams to ensure estimates are realistic and achievable. Prepare detailed quotations within customer deadlines while maintaining company margin targets. Update and revise quotations as project requirements change. Assist with job costing and continuous improvement of estimating processes. Maintain accurate records of quotations, customer information, and estimating data. Support sales and customer service teams with technical and pricing queries. Requirements Previous experience in estimating within sheet metal fabrication, engineering, or manufacturing environments. Good understanding of fabrication processes including laser cutting, bending/folding, welding, and finishing would be preferred but is not essential. Ability to read and interpret engineering drawings and CAD files. Strong numerical and analytical skills with excellent attention to detail. Proficient in Microsoft Office and estimating / ERP software. Excellent communication and organisational skills. Ability to manage multiple enquiries and work to tight deadlines. Knowledge of materials including mild steel, stainless steel, and aluminium would be advantageous. Engineering or manufacturing background preferred but not essential. What We Offer Competitive salary based on experience Opportunity to work within a growing and established fabrication business Supportive team environment Ongoing training and development opportunities IND123

Electrical Design Manager £70,000 - £80,000 + Car Allowance, BUPA, Pension Derbyshire. Ref: 25439 Are you ready to lead high-profile LV electrical design projects for some of the UK’s leading industrial and infrastructure clients? This is an exciting opportunity for an experienced Electrical Design Manager to join one of the UK’s leading systems integration businesses, delivering complex projects across Water Treatment and Power & Energy sectors. With a strong reputation for technical excellence and long-term customer partnerships, this role offers the chance to lead and develop LV design teams while working on large-scale industrial automation and electrical engineering projects in a progressive and highly supportive environment. Electrical Design Manager - The Role: Lead and oversee LV electrical design activities across multiple projects and site locations Manage and support a team of Electrical Design Engineers, ensuring high technical standards and project delivery Support compliance activities and client site assessments Mentor and develop junior and mid-level engineers within the team Ensure all designs meet relevant technical specifications, standards and QA requirements Work closely with clients, project teams and site teams throughout project delivery Drive continuous improvement and engineering best practice across the design function Electrical Design Manager - What We’re Looking For: Strong background in LV electrical design and industrial systems Previous leadership or management experience Detailed knowledge of motor starters, relay logic and electrical control systems Experience using an electrical CAD package, ideally EPLAN. Knowledge of BS EN (phone number removed) and BS EN 60947 standards HNC/HND in Electrical Engineering or equivalent experience Strong communication, leadership and problem-solving skills Why Join? Join a highly respected UK systems integration business Lead technically challenging projects across multiple major industries Excellent salary and benefits package including car allowance, BUPA and pension Flexible working and strong focus on employee well-being Clear opportunities for long-term progression and leadership development Supportive environment with ongoing training and professional development Interested? If you’re looking for a senior-level opportunity where you can lead engineering teams, influence major projects and continue developing your career within industrial automation and electrical systems, please contact Sharon Hill. Located in Derbyshire, this role would be commutable from Derby, Nottingham, Burton-on-Trent, Uttoxeter and other surrounding areas. AE1

An exciting opportunity has arisen for a motivated and detail-focused CAD Technician to join a growing façade design team based in the East Midlands. Responsibilities Produce accurate 2D CAD drawings, technical details, and layouts in line with project specifications Assist in the developmen

Design and Estimating Engineer Chesterfield Fire Detection, Security and Network Design £Competitive The Role The role of the Design and Estimating Engineer is to design and cost complex fire, life safety, electronic security systems and network infrastructure. You will be responsible for reviewing client/tender specification documents and drawings, liaising with suppliers, using CAD software for the detailed design, costing the projects and drafting proposal documents. You will work collaboratively with various departments, our clients, consultants, suppliers and colleagues, in order to ensure internal & external deadlines are met and that projects are accurately designed & costed. Duties and Responsibilities Progressing sales enquiries and tenders' requirements by working closely with Business Development Managers to ensure that customer requirements are understood Designing various life safety and security systems plus any other integrated building systems as specified within the Company's scope of work based upon customer requirements, specifications, drawings, and current standards Preparing proposals, quotations and tender documents and ensuring they are prepared on time and in line with company standards Assessing the risk factors influencing the security and fire design, to either enhance accordingly or to communicate back to the client Ensuring all quotations and system design specifications are compatible with the requirements of all applicable technical and regulatory standards and Codes of Practice Adhering to all Company policies and procedures Ensuring handovers and deadlines are achieved Reviewing changes in customers' specifications and modifying designs accordingly No job description can be entirely comprehensive, and the jobholder will be expected to adapt and carry out such other duties as may be required from time to time, on the understanding that they will be within the individual's remit and capability, and consistent with the status and responsibilities of the role within the business. Person Specification Essential Good working knowledge of fire, security or network infrastructure products and systems and their features/limitations Previous design and estimating experience, including the ability to prepare cost sheets and proposal documents Good verbal and written communication skills Excellent interpersonal skills Experience of reading and publishing specifications and technical drawings Excellent organisational and time management skills Excellent attention to detail Desirable Proficient in the use of the latest AutoCAD and/or Revit packages Current knowledge of technologies, technical and regulatory standards, which are relevant to the design process Previous installation or commissioning experience within a relevant sector Knowledge of European regulatory standards Proficiency in a European language is desirable but not essential We are an equal opportunity employer and value diversity. All employment is decided on the basis of qualifications, merit and business need. Working Conditions The role is based in an open plan office environment with multi-screen computer use. On occasion the role may require support at our other offices and onsite at customers' sites for design meetings. Fore more information on the role please call Giles Churchill at Amida Solutions between 8am to 8pm Weekdays or Weekends

Senior Mechanical Design Engineer Role - Senior Mechanical Design Engineer Contract - 12 months Rate - £55 per hour inside IR35 Location - Derby 5x per week Are you a Senior Mechanical Design Engineer looking to work on some of the UK's most technically challenging and high-impact engineering programmes? This is an opportunity to join a world-class engineering environment delivering cutting-edge projects across the nuclear and defence sectors. You'll become part of a highly skilled team working on complex systems where innovation, precision, and engineering excellence are at the heart of everything. This role offers the chance to work on technically demanding programmes while mentoring junior engineers and driving innovation across design processes and methodologies. Role Responsibilities Producing high-quality mechanical designs to customer specifications Creating detailed 3D CAD models and manufacturing drawings Supporting product development and design improvement initiatives Developing innovative engineering solutions to complex technical challenges Modifying and refining designs in line with project and customer requirements Ensuring designs comply with relevant safety and engineering standards Collaborating closely with manufacturing and engineering teams Supporting and mentoring junior engineers within the team Presenting technical designs and solutions to customers and stakeholders Skills Proven experience as a Senior Mechanical Design Engineer within a highly regulated environment such as defence, nuclear, aerospace, or similar Strong understanding of Design for Manufacture principles Experience using 3D CAD software such as Siemens NX or equivalent Familiarity with PLM systems such as Teamcentre or similar Strong knowledge of engineering standards and safety legislation Excellent problem-solving and communication skills Engineering qualification in a relevant discipline This is an excellent opportunity for an experienced Mechanical Design Engineer who wants to push technical boundaries and contribute to projects that make a real difference. Please note that this role requires UK Security Clearance! If you are qualified and interested, please apply or email (url removed)

We are recruiting for an experienced CNC Turner Programmer to work for our client who are in Chesterfield, The Role We are looking for a CNC Programmer to join our client based in Chesterfield, South Yorkshire. You will be experienced to programme/ Set & operate a CNC lathe with driven tooling or similar controls. The hours: Night shift Mon – Wed 5.30pm – 6.00am Thurs 5.30pm – 3.00am The Pay: You will earn an hourly rate between £17-£20 per hour. Questech Recruitment is a specialist engineering support within the Mechanical & Engineering industry, our focus is to support many clients within the M&E Sectors. If you feel you match the desired criteria, or you would like more information on roles such as CNC Machinist , CNC Programmer, CNC Setter , CNC Operator, we would really like to hear from you.#CNC #CNCProgrammer #fanuc #CNCSetter #CNCOperator #heidenhein #hurco #welding #fettler #plater # fabricator #warehouse #flt # CAD # Solidworks #welder #fabricator #structural

Construction, MEP, Wellness, Leisure, Spa, Pool, Sauna, CAD, AutoCAD, CAD Technician, Designer, Design, Project, Manager, Project Manager, Engineering, Nationwide, Travel, Wirral, England. In addition, you will also have previous experience within a CAD Technician position or similar, having a parti

The ideal Dental CAD/CAM Designer will posses strong CAD/CAM skills and possessing some dental knowledge, whilst also having experience using ExoCAD. Dental, CAD, CAM, ExoCAD, Implants, Crowns, Veneers, Bridges, Designing, Lab, Liverpool, Smile Design, Planning, Dental Grad, Dental CAD/CAM Designer.

In this varied role, you'll receive comprehensive CAD training and full guidance on the company's digital systems, enabling you to deliver eight pre-booked online consultations per day. During these sessions, you'll create bespoke CAD designs that meet client needs and present your proposals confide

Highway CAD Technician Cheshire | Hybrid Working | 12-Month Contract | £35 - £40 per hour Are you an experienced Highway CAD Technician looking for your next contract opportunity? My client is looking to appoint a Highway CAD Technician to support the delivery of a busy programme of h

CAD Designer (Sales) Mansfield £26,000 + £55k OTE (Uncapped Commission) +Training + Progression + Company Benefits Do you have a background in CAD Design or similar looking for a sales role within a company that is known for their excellent training and progression alongside the oppor

Are you a Project Manager/Coordinator/CAD Technician or similar coming from a background in the Construction/MEP/Leisure/Wellness Industry or a related field, looking to join a well-established, rapidly growing company, taking the leisure industry by storm?. On offer for the successful Project Manag

CAD Technician Joinery Manufacturing. We are currently recruiting for a CAD Technician to join a well-established bespoke joinery and manufacturing business supplying high-quality products into commercial and residential sectors. Producing accurate CAD drawings for bespoke joinery and timber produc

In this role, the successful Dental CAD/CAM Designer will be operating at the first stage of the implant process, playing an important role in the design production team, planning and designing teeth implants, veneers, crowns, and bridges using ExoCAD software. Dental CAD/CAM Designer (ExoCAD). Are

The CAD/CAM Programmer will play a key role in developing and optimising CNC programs for complex, high-precision machined components produced on multi-axis CNC milling and millturn machines. Package: £45,000 to £51,000 per annum depending on experience Bonus Scheme 24 days holida

During these sessions, you'll create bespoke CAD designs that meet client needs and present your proposals confidently, earning up to £50k per year with uncapped commission. This role would suit an aspiring Sales Representative looking for a role that offers full CAD training, the potential to earn

Proficient with Revit MEP and AutoCAD. With decades of industry expertise, they have built an excellent reputation for delivering technically robust and commercially practical engineering solutions across sectors including healthcare, education, retail, industrial, leisure and commercial development

E3 Recruitment is seeking a CAD/CAM CNC Programmer for their established manufacturing business in Haynes. This role involves developing and optimising bespoke engineered solutions and requires proficiency in CAD and CNC programming.

A leading manufacturing company in the United Kingdom is seeking a CAD/CAM Programmer to program 3 and 5-axis CNC machines using software such as Hypermill. Candidates should have CAD/CAM programming experience and may receive training if necessary.

This role requires expertise in producing technical CAD drawings and concept 3D designs, with significant experience in relevant design software such as 3DS Max and AutoCAD.

Paterson & Cooke is looking for a Senior CAD Designer to join their team in Cornwall.

Straco Group, a well-established Point of Sale / Display Production company in West Yorkshire, is seeking a Solidworks CAD Designer to join their team.

This role involves understanding customer needs, converting insights into sales, and creating kitchen designs using CAD software.

Lead the development and implementation on CAD standards, ensuring consistency and accuracy Manage and mentor all grades of CAD technicians Support CAD software and hardware management licensing, performance and compatibility Manage vendor and partner s CAD management relationships Support a

Creation of new concepts to meet packaging briefs The ability to gain an insight into design trends across different market segments to allow proactive approaches to our customers and the markets in which they belong Awareness of the latest design tools and technologies in order to be able to of

This role involves managing the CAD process, ensuring compliance with regulations, and mentoring a team of CAD technicians. The ideal candidate will possess a relevant technical qualification and experience in water/wastewater infrastructure design, utilizing software like AutoCAD and Revit. Avove L

KEY WORDS: Head of Manufacturing, CAD Design, CAD, large format, graphics, exhibitions, events, Stanstead, Essex, Head of Manufacturing, CAD Design, CAD, large format, graphics, exhibitions, events, Stanstead, Essex, Head of Manufacturing, CAD Design, CAD, large format, graphics, exhibitions, events

KEY WORDS: Head of Manufacturing, CAD Design, CAD, large format, graphics, exhibitions, events, Stanstead, Essex, Head of Manufacturing, CAD Design, CAD, large format, graphics, exhibitions, events, Stanstead, Essex, Head of Manufacturing, CAD Design, CAD, large format, graphics, exhibitions, events

If you have a passion for developing future engineering talent and hold a minimum NVQ Level 3 qualification in Mechanical Engineering alongside qualifications and practical experience in CAD/AutoCAD, we would love to hear from you. Delivering engaging and practical lessons in Engineering Drawings, C

Product Designer to create hardware products with CAD skills and mechanical engineering expertise, collaborating with cross-functional teams.

Must have NVQ Level 3 in Mechanical Engineering and CAD/AutoCAD experience. Seeking a Lecturer in Engineering Drawings/CAD to deliver high-quality teaching and training in technical drawing and computer-aided design programs.

Mechanical Engineering graduate wanted for a CAD Engineer role.

CAD Engineer to create electrical designs, manage projects, and use AutoCAD, Vault, and 3D Plant in Hemel Hempstead.