Trabajos cad en GloucesterCrear alertas

As an experienced Traffic Management Operative, you will be required to work on Traffic Management Schemes for a range of projects, helping them to run smoothly and efficiently to achieve maximum production in a working day, whilst maintaining a high Health and Safety standard. This role requires flexibility due to the nature of the business. You must be able to work both days and nights, including some weekends as required. You must have a can do and responsible attitude to work. We are looking for someone to: • Oversee all methods of traffic management; Give and take, Priority, Stop/Go boards, Portable traffic signals, Convoy working, Road closures, Lane closures and diversions, • Ensure all work is carried out according to safe working methods and best practice procedures, • Carry out risk assessments and method statements on works involving traffic management, • Ensure that all activities associated with the job are carried out according to laid down procedures where possible. Identify areas that can be improved and report to your line manager, • Ensure that daily vehicle checks are carried out – to ensure cleanliness and tidiness of vehicle and the safety of the driver and passenger, • Promote positive company image whilst at work (via wearing of company clothing, attitude, and site cleanliness), • Demonstrate initiative by constantly looking to see where improvements can be made, • Assist the public, directing them through safe site lines when required, • Only undertake Traffic Management activities that you have the qualification to undertake (LANTRA), • All Traffic Management setups must be compliant with guidance and legislation (Red Book, Chapter 8, ARTSM etc.), • Regularly check your site to ensure it remains compliant, • Report any unsafe acts and conditions, and rectify immediately if safe and competent to do so, • Drive safely and avoid distractions. Keep within the speed limit and drive with due care and attention to prevent road traffic collisions, • Park vehicles safely, taking consideration of members of the public and other road users, • Five-point PPE to be worn on site at all times, • Lantra 12d accreditation as a minimum TTMBC, 12d (M1-M2), • Lantra 12 a/b accreditation, IPV driver, foreman advantageous, • Provide evidence that you understand the differences between Chapter 8 and the Safety at Street Works and Road Works (red book) and how these apply, • Full valid UK driving licence, • Be able to read and understand CAD drawings, in relation to the works required, • Preferable to have mechanical ability in relation to Traffic Lights We offer a competitive salary based on experience along with a full benefits package. Network Plus is proud to be an Equal Opportunity Employer. We celebrate diversity and do not discriminate based on race, religion, colour, nationality, sex, sexual orientation, age, veteran status, disability status, or any other applicable characteristics protected by law. We are Armed Forces-friendly. We welcome applications from ex-Armed Forces personnel, reservists, armed forces veterans, cadet instructors and military spouses/partners. We understand that privacy and the security of your personal information is extremely important. By applying for this role, you agree to the terms of our privacy policy which you can find here - . Go Traffic Management has been serving traffic management solutions to clients since 2008, and are now one of the UK’s largest traffic management providers. Our services are delivered from our 22 regional depots, through our dedicated team of 200 employees and support network of approved suppliers. At Go Traffic Management, we have a reputation for providing clients with extensive, well-planned, and expertly delivered solutions for projects and schemes of all sizes. We pride ourselves in meeting (and often exceeding) clients’ expectations in a professional and cost-effective manner, which is a strategy that has resulted in our long-standing working relationships with clients, partners, and stakeholders. Be: SAFE - Go Traffic Management Our Be: SAFE campaign actively encourages our workforce to work safely and avoid unsafe acts and conditions by following four basic rules.

A fantastic opportunity to join a forward-thinking company that leads the way in producing cutting-edge machinery for the automation industry. As an Electrical Design Engineer, you'll have the opportunity to work on innovative projects, collaborate with a talented team, and make a real impact in a dynamic and supportive environment. If you're passionate about engineering and looking for a role that offers both challenge and reward, this could be the perfect opportunity for you. What You Will Do: • Design electrical systems for a variety of standard and special-purpose machinery, ensuring they meet customer specifications and industry standards., • Create detailed electrical schematics, cabinet layouts, parts lists, and documentation to support manufacturing and assembly., • Collaborate closely with mechanical and software teams to deliver fully integrated design solutions., • Select electrical components with an emphasis on standardisation, cost efficiency, and availability., • Ensure compliance with safety regulations and standards, including conducting risk assessments and supporting CE compliance., • Provide technical support to other departments and contribute to continuous improvement initiatives. What You Will Bring: • Proven experience as an Electrical Design Engineer, ideally within the machinery or automation industry., • A minimum qualification of HNC in Electrical/Electronic Engineering or equivalent., • Proficiency in electrical CAD software, with AutoCAD Electrical being highly desirable., • Knowledge of machine safety standards such as BS EN ISO 13849-1 & 2 and BS EN 60204-1., • Strong problem-solving skills and the ability to collaborate effectively across disciplines. This role is integral to the company's mission of delivering world-class machinery solutions that power industries worldwide. By joining this team, you'll contribute to a legacy of engineering excellence and innovation, helping to shape the future of automation technology. Location: The role is based in Brockworth, Gloucester, offering a vibrant and accessible location within the UK. Interested?: Don't miss this incredible opportunity to advance your career as an Electrical Design Engineer. Apply today to join a company that values innovation, collaboration, and professional growth. Let's make your next career move a game-changer! Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency.In order for your CV to be processed effectively, please ensure your name, email address, phone number and location (post code OR town OR county, as a minimum) are included.

Electrical Design Engineer Location: Gloucester Contract: Permanent Responsible for the electrical design of a wide range of standard and special purpose machinery. The Electrical Design Engineer will take technical lead responsibility on specific projects as identified by the Technical Director / Controls System Manager. Role Responsibilities – Electrical Design Engineer • Design electrical systems for machinery in the lead-acid battery industry, producing schematics, cabinet layouts, BOMs, termination lists, and full technical documentation., • Collaborate with mechanical, software, operations, and production teams to ensure designs meet customer specifications and are optimised for manufacture., • Select electrical components considering safety, CE compliance, standardisation, cost, and availability, while conducting risk assessments as needed., • Present electrical designs at reviews, maintain accurate design files, manage design changes, and ensure outputs integrate with all engineering disciplines., • Identify and communicate technical risks, generate reports, support customers on-site, and validate or check other engineers’ drawings when required., • Meet design-to-cost targets, follow departmental processes, and ensure all company and ethical policies are adhered to., • Contribute to continuous improvement initiatives. The ideal candidate for the Electrical Design Engineer role would have: • 3 to 5 years’ experience as an electrical design engineer within the machinery / automation industry., • Qualified to a minimum standard of HNC in Electrical/Electronic Engineering or similar qualification., • Knowledge of machine safety standards: BS EN ISO 13849-1 & 2 and BS EN 60204-, • experience in machine safety standards and risk assessments (TÜV certification advantageous)., • Proficient in the use of an electrical CAD package; AutoCAD Electrical desirable., • Good understanding of design for manufacture, cost, and standardisation., • Training will be provided on the company’s IFS (MRP) data control system. What we can offer - Electrical Design Engineer • 25 days annual holiday plus all bank holidays, • 9/10 shift pattern, • Private Medical insurance, • A supportive, inclusive environment, • Ongoing training and development Who We're Looking For: Candidates currently working as an Electrical Project Engineer, Controls Engineer or graduate Electrical Designer are ideal for this role Explore more opportunities in your field at . For more information on this role, please contact Paul Furlong on 01453 829789 or send a copy of your CV to Omega Resource Group is an employment agency specialising in opportunities at all levels within the Engineering, Aerospace, Automotive, Electronics, Defence, Scientific, Oil & Gas, Construction and Manufacturing sectors.

Job Description Position: Electrical Design Engineer Department: Controls / Electrical Engineering Responsible to: Controls System Manager Location: Gloucester / On-site (with occasional travel) About TBS Engineering TBS Engineering is a global leader in automated battery assembly and manufacturing equipment. Our people are at the heart of everything we do, and we are committed to creating a workplace where individuals can thrive, grow, and make a real impact. The Role As an Electrical Design Engineer at TBS Engineering, you will be responsible for the electrical design of a wide range of standard and special-purpose machines for the lead-acid battery industry. You will take technical ownership of assigned projects, working closely with mechanical, software, manufacturing, and operations teams to deliver robust, compliant, and cost-effective electrical designs. This role offers the opportunity to take technical leadership, contribute to complex automation projects, and play a key role in delivering innovative engineering solutions to global customers. Key Responsibilities • Lead the electrical design of standard and special-purpose machinery, including lead casting machines, plate feeders and stackers, battery assembly and test machines, and robotic automation cells, • Take technical lead responsibility on assigned projects, as agreed with the Controls System Manager and Technical Director – Control panel and cabinet layouts – Bills of materials (BOMs) – Termination lists – Electrical design and compliance documentation • Work collaboratively with mechanical and software engineering teams to ensure designs meet functional, safety, and customer requirements, • Agree electrical design approaches with senior engineers and participate in formal design reviews, • Carry out and support risk assessments to ensure compliance with machine safety standards and CE requirements, • Select electrical components with consideration for standardisation, availability, obsolescence, cost, and design-for-manufacture principles, • Ensure electrical designs meet agreed cost targets and delivery timescales, • Manage and implement design change requests efficiently and accurately, • Maintain accurate and up-to-date design files, drawings, and documentation in line with departmental procedures, • Highlight technical and electrical risks to relevant managers and stakeholders, • Support manufacturing and operations teams to ensure designs are practical, buildable, and optimised for production, • Prepare technical reports and customer documentation as required, • Provide on-site customer support, including presentations and fault-finding, when required, • Review and validate electrical designs and drawings produced by other engineers where appropriate, • Follow departmental design processes and company policies at all times, • Actively participate in continuous improvement initiatives and engineering projects, • Live the values of TBS Engineering and Berkshire Hathaway in everything you do Skills, Knowledge & Experience • 3–5 years’ experience as an Electrical Design Engineer within the machinery or automation industry, • Qualified to a minimum of HNC in Electrical / Electronic Engineering or equivalent, • Strong knowledge of machine safety standards, including BS EN ISO 13849-1 & 2 and BS EN 60204-1, • Experience in risk assessments and machine safety compliance (TÜV certification desirable), • Proficient in electrical CAD systems; AutoCAD Electrical highly desirable, • Strong understanding of design for manufacture, standardisation, and cost control, • Proven ability to produce and interpret detailed electrical drawings and documentation, • Ability to work collaboratively in multi-disciplinary engineering teams, • Strong problem-solving skills and attention to detail, • Confident, proactive approach with the ability to take technical ownership, • Good written and verbal communication skills, • Strong IT skills and ability to manage design data effectively, • Self-motivated, organised, and able to work to tight deadlines, • Willingness to undertake ongoing professional development, • Full passport and willingness to travel internationally on occasion Training will be provided on the company’s IFS (MRP) data control system. Culture & Benefits At TBS Engineering, we value our people and are committed to supporting their wellbeing and development. Our benefits include: • Competitive salary, • Company pension plan, • Group life assurance and income protection, • Private medical insurance, • Employee incentive plan, • Flexible working options, including a 9-day fortnight (work 9 days over 2 weeks, with every other Friday off), • Long Service Award Bringing Our TBS Values to Life • Customer Obsession – Always be passionate and obsessed with doing what it takes to make our customers happy, • Relentless Invention – Always look for opportunities to push boundaries of performance and find a better way, • Own The Outcome – Always take responsibility for the task and see it through to the desired outcome, • Win Together – Always work collaboratively with each other and our customers to achieve positive results, • Do The Right Thing – Always, without exception, act ethically, safely, with integrity, and never compromise our values Our Employee Value Proposition When you give your best, we’ll do the same, with competitive pay, better benefits, flexibility, and real opportunities to learn, grow and have fun along the way. In return, we ask you to take pride and enthusiasm in your work, share your ideas, respect your colleagues and go the extra mile when it matters. The more we succeed together, the more we can give back. Working together, the business grows, and so do you!

JOB – Electro-Mechanical Fitter TERM- Permanent LOCATION – Gloucester SALARY - £30,000 to £40,000, dependent on experience My client specialises in Automation in the Manufacturing sector. They are looking for a Mechanical Fitter to join their team in the Gloucester area on a permanent basis. The Mechanical Fitter will ideally have the following attributes: • Industry experience ideally working in a hands-on fitting/manufacture/assembly role, • Able to read and work to technical drawings, • Good all-round engineering skills, • Proficiency with CAD software – ideally SolidWorks or similar, • Basic understanding of electrical systems, • Excellent knowledge of manufacturing processes and materials – sheet metal, castings, machining etc., • Be technically minded and proactive, with a head for problem solving, • Self-motivated with excellent attention to detail, • Have excellent communication skills both verbal and written The Mechanical Fitter role will involve: • Assisting in the build of new processes and machinery setup, • Mechanical assembly of various products and machines, • Working to company standards for test and repair, • Maintaining equipment and machinery, • Performing development activities and finding new mechanical solutions, • Being involved in the product design and development process using CAD, • Producing the relevant documentation that is required, • Driving continuous improvement If you are interested in this position, please apply with an up to date CV as soon as possible, along with your availability and your salary expectation.

Pattern Maker / Bench Joiner Industry Type: Manufacturing Location: Gloucester Salary: Up to £37,500 (dependent on experience) + Benefits Are you a skilled Pattern Maker or Bench Joiner with experience in composite materials, metalwork, and woodworking? We're looking for a talented individual to join our Manufacturing Materials team in a challenging and rewarding role. If you have an eye for detail, a passion for precision, and experience working with both manual and CNC equipment, we'd love to hear from you! What will you do as our Pattern Maker/Bench Joiner? • Construct patterns and moulds from metal, wood, and composite materials based on detailed drawings and CAD data., • Operate CNC programming machines to complete assigned tasks., • Follow manufacturing instructions to carry out day-to-day production requirements., • Maintain and clean tools and equipment, ensuring they are stored safely., • Liaise with customers and contractors as needed to support project requirements., • Contribute to research and development tasks when required., • Minimise waste and ensure all waste materials are disposed of in compliance with company procedures., • Follow stock control procedures as instructed by the Pattern Shop Manager., • Strong knowledge of composites, woodworking, and metalworking techniques., • Experience operating machines like sanders, circular saws, band saws, mills, and lathes., • Ability to work effectively both as part of a team and independently, with a focus on accuracy and quality., • Experience in CNC programming is preferred but not essential., • Discretionary bonus scheme up to 15%, • 25 days holiday + bank holidays, • Enhanced pension contributions (matched), • Life insurance (4x annual salary), • Access to employee well-being programmes, • Cycle to work scheme, • Full-time, 37.5 hours per week, Monday to Thursday (8am-4.45pm) and Friday (8am-12.30pm) If you would like to apply for the role of Pattern Maker / Bench Joiner, then please email your CV to or call Donna on 07885968651. Closing date is 05.03.26 Please note this could change subject to suitable applications. Hawk 3 Talent Solutions are acting as an employment agency on behalf of its client.

An exciting opportunity has arisen to join a market-leading group operating across the Commercial, Industrial, Residential and Service sectors, who are now looking for an Electrical Design Engineer to support the delivery of innovative engineering solutions across their expanding product portfolio. This Gloucestershire based, dynamic organisation has become the market leader in each of the sectors it serves and is embarking on an ambitious growth plan over the next 3 years. With continued investment in products, infrastructure and most importantly, its people, this is a fantastic opportunity to join a forward-thinking engineering function that prides itself on being entrepreneurial, customer-focused, competitive and operationally best-in-class. As an Electrical Design Engineer here, you will take responsibility for electrical design activities across the product lifecycle, from early-stage concepts all the way through to production release. This will include control panel design, PLC integration and ensuring that all electrical systems meet stringent safety, quality and compliance requirements. This is a crucial role in delivering robust and manufacturable engineering solutions working as part of a multi-disciplinary team. Key responsibilities for the role of Electrical Design Engineer based in Gloucestershire: • Leading the electrical design of packaged pumping systems, including control panel layouts, schematic diagrams and cable schedules., • Researching and developing new product concepts while enhancing existing designs in response to customer, production and market feedback., • Specifying and selecting electrical components to meet performance, safety and compliance requirements., • Development and integration of PLC-based control systems including configuration, I/O definition and functional documentation (PLC programming experience would be useful but is not essential)., • Producing and maintaining detailed electrical documentation including wiring diagrams, design calculations and BOMs., • Ensuring that all electrical designs comply with CE/UKCA requirements, Health & Safety regulations and relevant UK/EU directives (LVD, EMC, Machinery Directive)., • Supporting EMC compliance through best-practice design and collaboration with external test facilities., • Collaborating with Mechanical Design, Compliance and Manufacturing teams to ensure design integrity and manufacturability., • Providing input into design reviews, risk assessments and verification/validation testing throughout the development lifecycle. Key skills required for Gloucestershire based role of Electrical Design Engineer: • Degree or equivalent in Electrical or Electronic Engineering., • Proven experience in product design or development, (specific experience involving water management / fluid-handling equipment would be ideal but is not a pre-requisite)., • Experience of working within R&D or New Product Development environments., • Proven experience of designing industrial/commercial control panels (a working knowledge of PLC-based control systems and Variable Speed Drives would be an advantage but is not a pre-requisite), • Solid experience in using CAD/schematic design software, experience of SolidWorks Electrical would be ideal but experience of EPLAN, or AutoCAD Electrical will also be considered., • Familiarity with key standards and directives, including: • Low Voltage Directive (LVD), • EMC Directive, • Machinery Directive, • BS EN 60204-1 (Electrical Equipment of Machines), • EN 60335 Working environment and opportunities: • Hybrid working arrangements with time split between the Gloucestershire based office, home and site, • Opportunity to join a highly skilled, ambitious engineering team within a rapidly expanding market leader, • Involvement in the full product lifecycle, contributing to innovative and technically challenging projects., • A culture that encourages development, continuous improvement and professional growth. This is a great opportunity to join a forward-thinking engineering group with ambitious growth plans, a collaborative culture and a commitment to building the best place to work while helping shape the future of high-performance, compliant engineering solutions. To apply please send your CV to , or for more information contact Chuck Lam on 01582 878868.

Mechanical Engineer Gloucestershire £50-55,000 T2M Resourcing are recruiting for a Mechanical Engineer on behalf of a growing engineering business to be a part of the new product development and customer projects team. The Mechanical Engineer role will balance 2D and 3D design, FEA, and developing prototypes alongside a diverse engineering team. The ideal candidate will have a passion for engineering and be driven towards having an impact within the business. Key duties of a Mechanical Engineer: • Mechanical design and development of new and existing products., • Managing and maintaining SolidWorks libraries., • Support business development and project teams with initial designs or visuals for client presentations., • Prototyping and build work of initial concepts., • FEA (Finite Element Analysis) and simulation using Solidworks., • Analysing simulation and modelling results., • Generate Bills of Materials and production documentation., • Verification and validation testing., • Ensure safety and design for manufacture is at the heart of Mechanical Engineering. Requirements to be successful as a Mechanical Engineer: • Passionate about engineering and driven to make a difference within a business., • Degree or equivalent in Mechanical Engineering., • Confident in designing 2D and 3D models., • Experience in professional Mechanical Engineering roles., • Previously taken products from concept to production phase – NPD projects., • Knowledge of pumps, industrial machinery, and electro-mechanical products., • Capable of running Finite Element Analysis and simulations on Solidworks., • Confident in utilising CAD packages such as Solidworks or AutoCAD., • Understanding of DFMEA and manufacturing engineering., • Strong problem solving skills, able to develop new solutions. This role will be based from the production, design, and testing facility in Gloucestershire however will include travel to client sites and therefore a UK Driving License is essential for the role.

Their Ideal Candidate * They’re seeking a skilled and experienced CNC Team Leader to lead our machining team in a dynamic manufacturing environment. The ideal candidate will have a strong background in CAD/CAM programming, hands-on experience with machining castings, and proven leadership c

Proficiency in AutoCAD is essential, and Revit knowledge is a plus.

A leading water treatment company is seeking a CAD Technician to manage PDM systems and support CAD administration. Ideal candidates will have experience with Solidworks PDM systems and 3D CAD, along with strong communication skills and attention to detail.

This is an exciting opportunity to work on residential house building projects, producing construction drawings and supporting our wider architectural team.Architectural Technology, Building, or Architecture.Data, Telecom, Water, Electrical, PV/Battery, Ventilation).Incorporate feedback from interna

The CAD Technician is responsible for uploading models and drawings to PDM system, maintaining a good understanding of PDM system implementation, CAD administration (non-design work), including updating drawing packs through ECRs. The CAD Technician is also responsible for drawing office ECRs and pr

Create are currently working with a number of leading luxury designers across London, who require CAD Pattern Cutter’s (working across Gerber & Lectra) to join them on an ongoing freelance basis. Our client’s work on womenswear RTW, VIP and fashion week collections and are looking for highly ski

Required Skills & Experience for this Project CAD Coordinator role: Strong experience generating 2D AutoCAD mechanical drawings. Project CAD Coordinator We are seeking a Project CAD Coordinator to join our client’s busy Pumping Stations department. Details of this Project CAD Coordinator role

SEP Rail Services is looking to recruit an experienced CAD Technician & 3D Modeller with a. This role will support the delivery of water and utilities projects by producing accurate CAD drawings, 3D models and GIS models from survey and engineering inputs. Produce 3D CAD drawings and models for

Our client, is currently seeking a Senior CAD Technician to join their team on a contract basis. Detailing highways and utility 2D AutoCAD, including keys signs, key lines, and tracking. Job Requirements: Experience in highways and utility 2D AutoCAD detailing.

Start a career with one of the best beauty brands around?World famous beauty and cosmetics brand Avon is looking for full and part time representatives in the UK right now as business expands.See the TV Ad campaignThis is your chance to work with a premier international brand with 130 years of prove

Job Requirements: Experience in highways and utility 2D AutoCAD detailing. Outside IR35 If you have the necessary skills and experience in highways CAD detailing and are seeking a challenging contract role, we encourage you to apply now and join our client's dynamic team. Our client, is current

CAD EngineerCardiff27621/610£30,000 - £38,000 plus car allowance and other benefits Benefits Package:A starting salary of £30,000 - £38,000Group pension scheme - contributions increasing after 1 year serviceCompany laptop and PhoneFree gym membership (after 1 year)Free healthcare (after

CAD / REVIT Technician (Electrical Design / Commercial) £55,000 - £65,000 + Pension + Progression + Training + Hybrid Option (Post Probation) AylesburyAre you a Lighting Designer with experience delivering commercial or office fit-out projects, looking to join a growing business where you will tak

Liaise with project teams to understand requirements and timelines, resolve technical queries, and support smooth project deliveryKnowledge, Skills & Experience:Proficient in CAD software (AutoCAD, or similar). CAD TechnicianCardiff£29'000 - £31'000per annum + pension, share scheme and more. A

D CAD DesignerOur client, a successful manufacturing business close to Norwich, are currently seeking a 3D CAD Designer to join their team.

CIVIL/STRUCTURAL REVIT CAD TECHNICIAN POSITION : Civil/Structural Revit CAD Technician LOCATION : Commutable from Beverley , Hull, Hessle , Goole , Selby , York , Bridlington , Grimsby , Doncaster , Scunthorpe SALARY AND BENEFITS : Up to £38k DOE. Great Benefits THE ROLE : This is a great opportuni

Overview: Further to ongoing sustained business growth, we are working closely with one of our manufacturing partners to appoint a CAD/CAM Engineer to join their dynamic team.

Electrical CAD Engineer Aerolux (Exclusive via RPS Recruitment)Aerolux, a global leader in aircraft galley and cabin systems, is expanding rapidly following its acquisition by Zoppas Industries. With plans to triple in size within the next three years, Aerolux is recruiting an Electrical CAD Engine

As the CAD Design Engineer, you will be working alongside a market-leading Defence and Aerospace company who are constantly growing and developing. Experience in handling PDM/VPM tools and link to CAD models with design in a context environment.

This role would suit a CAD Engineer or similar with Joinery and SolidWorks knowledge looking to join a rapidly growing company, offering a wide range of in-house training and progression to management within 2 years. Working within the tight-knit CAD department. CAD, Design, Project, Building, Engin

CAD Technician - Water & Wastewater Infrastructure Fleet, Hampshire (Office-Based) Full-Time | Permanent Salary up to £50,000 DOE + BenefitsAre you a CAD Technician with experience in infrastructure or engineering projects? Looking to d

Are you a CAD Designer looking to continue developing your career? Do you enjoy producing detailed technical drawings and working closely with manufacturing teams to bring designs to life? If so, we want to hear from you!We are currently recruiting for a CAD Designer to join a wel

CAD Technician (Furniture / AutoCAD) £30,000 - £35,000 + Bonus + Pension + Training + Company Benefits Mansfield Are you a CAD Technician or similar from a furniture background looking to join

The are now seeking a skilled and experienced CAD Engineer to join their trusted and successful business.

We are seeking a CAD Draughtsperson proficient in SolidWorks to join the design team. Previous experience using 3D CAD software is essential; while SolidWorks is preferred, similar packages will be considered.

Strong skills in CAD, particularly Rhino and Adobe, as well as leadership abilities are essential.

An established Environmental Engineering consultancy in South Devon is seeking a 3D CAD Draughtsman to produce high-quality engineering models and drawings.

A leading engineering consultancy in London is seeking a skilled CAD Technician to join their growing Facades Team. Proficiency in AutoCAD and Revit is required.

A leading engineering firm is seeking a Junior CAD Technician to support technical sales and CAD operations in the UK. Candidates should have prior CAD experience and an academic qualification in engineering.

A leading automotive design consultancy in the UK is looking for a CAD/CAM/CAE Designer to join their team on a long-term contract basis.

A global technology firm in the UK is looking for an AV CAD Designer to join the EMEA & APAC team. The successful candidate will set up and maintain Revit and AutoCAD projects, develop engineering drawings, and collaborate with engineers on audiovisual systems. Proficiency in Autodesk tools such as

The role requires knowledge of CNC machinery and experience with CAD/CAM software.

A prominent engineering firm in Greater London is seeking a CAD Designer for an 18-month contract. The role involves creating plot plans and general arrangements using AutoCAD, as well as reviewing models in Navisworks. Candidates should have experience in CAD design within engineering contexts and

Cluttons is currently recruiting for a Senior CAD/BIM Technician/Revit Designer in Oxford. Candidates should be AutoCAD and Revit proficient with 5-7 years experience having delivered multiple large scale projects. We support other Cluttons’ offices with CAD work from Oxford.

Act as the digital design authority for CAD, 3D, and BIM deliverables across power and data centre projects. Provide technical oversight and review of CAD and BIM outputs produced by external designers and subcontractors. Proven experience in a CAD, 3D, or BIM engineering role within engineering, co

A leading furniture specialist in the UK is seeking a Technical Surveyor to conduct home surveys and finalize installation details.The role involves visiting customers' homes, ensuring design feasibility, and effectively communicating with installation teams.Ideal candidates will have experience in

A renewable energy infrastructure company in the UK is looking for a capable CAD Engineer to produce high-quality CAD models and technical drawings. Candidates should have strong communication skills and proficiency in CAD software such as AutoCAD and SolidWorks.

Due to our continued success and expansion, we are now have an amazing opportunity for either an experienced CAD Technician/Draftsperson or a recent graduate to join our dynamic team in Stourbridge. You will need to have excellent AutoCAD capabilities gained through a recognised institution, Profici

The ideal candidate will be a qualified Mechanical Engineer with CAD and technical drawing skills.