Deployment engineer jobs in PeterboroughCreate job alerts

Senior Automation Engineer Location: Peterborough | Full-time, Permanent | Competitive salary depending on experience If a food factory's production line is running reliably six months after handover because the integration was done correctly and the documentation was complete, that is your standard. You develop, support and own the technical quality of automation systems that run in UK food factories. You are the technical authority on your work. You follow controlled processes, maintain accurate configuration records, and take ownership of issues through to full resolution. The work spans PLC controls, SCADA, HMI systems, MES integration, industrial networking and OT/IT architecture. You will act as a Level 3 escalation resource for complex automation support tickets. You will need to diagnose problems methodically under pressure and communicate clearly with both engineering teams and customer operations staff. If you have proven experience developing and supporting industrial automation systems and you want a role where getting it right matters, where process, precision and accountability are valued, this role is built for that. What this role actually looks like The work moves between development, support escalation and project delivery. Some periods are desk-based: programming, documenting, reviewing architectures and maintaining configuration control. Others require you to be on site at a customer facility, working through a commissioning phase or resolving a live production incident. On development and project work, you configure and support PLC, SCADA, MES and integration solutions across customer environments. You ensure all changes follow controlled processes and documented procedures. You maintain version management across automation platforms and contribute to the standardisation of engineering practices across OAL's project and support contracts. On escalation and support, you act as the Level 3 resource for complex automation and OT/IT incidents. You take ownership of high-impact issues through to full resolution, provide structured root cause analysis and corrective action reports, and maintain clear escalation pathways. You make sure SLA response and resolution targets are met. A typical week depends on where your projects and support contracts sit in the cycle. During development phases you will be at OAL's Peterborough base, configuring systems and running tests. During deployment or go-live phases you will be at customer sites leading commissioning or resolving issues. Between projects you will be involved in architecture reviews, knowledge base development and SOP improvement. Your skills probably already fit This role suits engineers who have built, supported and improved industrial automation systems in structured environments. If you have acted as a senior technical resource, worked to defined procedures and SLAs, and taken ownership of complex incidents, you already have the core of what we need. Relevant technical experience includes: • PLC and industrial controls: Rockwell, Siemens TIA Portal, Mitsubishi or equivalent — programming, commissioning, fault-finding, • SCADA and HMI: iFix, FactoryTalk, Ignition, Wonderware or similar platforms, • Systems integration: getting multiple technologies to work together reliably on a production line, • Industrial communication protocols: Ethernet/IP, PROFINET, MQTT, fieldbus and integration principles, • OT/IT infrastructure: Windows Server, SQL Server, industrial networking, VMware or VEEAM, • Edge technologies: Node-RED, RevPi or similar (desirable) Engineers who do well in this role at OAL have typically come from systems integrators, automation suppliers, managed service or support environments, or manufacturing engineering roles where they owned the technical quality of what they delivered. You do not need food manufacturing experience. The engineering is transferable. You will learn the specifics of food production environments through project delivery and customer support work. What you should expect from us, and what we expect from you We will be direct about this, because it helps both sides. You are accountable for technical accuracy. Whether you are writing a SCADA configuration, responding to an escalation or supporting a go-live, the quality and correctness of your work is your responsibility. We will support you with clear processes, good tooling and experienced colleagues. The work is methodical. You will follow documented procedures, maintain version control, produce structured reports and communicate to a defined standard. Engineers who find structure useful rather than frustrating thrive here. This is not a role where informal or undocumented work is acceptable. Escalation periods require calm under pressure. When a production line is down and the customer is waiting, you need to diagnose, decide and act clearly. We need engineers who work through problems systematically, even when the stakes are high. Standards are high. OAL delivers automation systems that run 24/7. The work you do — the configurations you maintain, the documentation you produce, the decisions you make under pressure — directly affects whether a customer's line stays running. Travel is part of the role. Customer sites are across the UK. Deployment and commissioning phases require time on site. We ask for flexibility around this and we are realistic about planning it. In return, you get: • A role with clear scope, defined responsibilities and the tools to do the job properly, • Exposure to a wide range of automation technologies: PLC, SCADA, MES, networking, OT/IT integration, • Variety across different customers, sites and technologies, • A team of engineers who take quality seriously, • The satisfaction of knowing the systems you support are genuinely reliable because of how carefully you work, • Progression based on what you deliver, not how long you have been here What we are looking for • Proven experience developing and supporting PLC, SCADA and HMI systems, • Strong knowledge of at least one major automation platform (Rockwell, Siemens TIA Portal, Mitsubishi), • Experience working within structured support or managed service environments, • Experience acting as a senior escalation point for complex automation or OT/IT incidents, • Solid understanding of industrial communication protocols and integration principles, • Ability to interpret P&IDs and electrical drawings, • Strong troubleshooting, root cause analysis and technical documentation skills, • Comfortable working to defined procedures and service level agreements, • Full UK driving licence, • Willing to travel and stay away from home when projects require it Experience in food manufacturing is not required. If you have the automation engineering and support skills, we will help you apply them in this sector. The mission you are contributing to OAL automates UK food manufacturing. Food factories face labour shortages, tightening compliance requirements and pressure on costs. The systems you develop and support directly address those problems. You will work on packaging verification systems that prevent product recalls, robotic cells that replace repetitive manual work, and vision systems that catch errors human inspection cannot sustain. These systems run on live production lines across the UK. You will build them, commission them, support them and make sure they keep running long after the project closes. Interested? Click on “APPLY” today! We do not need a long cover letter. Tell us what systems you have worked on, what platforms you are comfortable with, and what interests you about this role.

Project Engineer Location: Peterborough | Full-time, Permanent | Up to £60k depending on experience You own the project. From first build at OAL to a system running in production at a customer site. This is a senior engineering role. You are responsible for delivering complete automation and robotics projects: pre-building and testing systems at OAL's Peterborough facility, deploying them at customer sites across the UK, and making sure they work reliably in live production. You are the lead engineer on your projects. You manage the technical delivery, coordinate the engineering team around you, act as the primary point of contact for the customer on site, and take ownership of the outcome. If a system is running well in a food factory six months after handover, that is your project. You will work across machine vision, PLC controls, industrial robotics and SCADA systems. You will manage project budgets and timelines. You will need to make technical decisions under pressure and communicate clearly with both engineers and factory operations teams. If you have five or more years of experience delivering automation or systems integration projects and you want to own the full lifecycle rather than just a piece of it, this role is built for that. What this role actually looks like Every project follows a cycle: design, pre-build and test at OAL, site installation, live commissioning, go-live support and customer handover. As Project Engineer, you are responsible for the full delivery. Your work starts during the design phase and does not finish until the customer is running the system independently. At OAL's Peterborough facility, you oversee the pre-build and testing of systems before they leave the building. You work with commissioning engineers, installation engineers and software engineers to assemble, wire, program and prove equipment in a controlled environment. You make sure the system meets specification and is ready for site before it ships. At customer sites across the UK, you lead the installation, commissioning and go-live. You are the primary point of contact for the customer's technical and operations teams. You manage the on-site engineering work, resolve issues as they come up, coordinate with OAL's Peterborough base when needed, and make sure the system is handed over properly with documentation and training complete. Day to day, you are responsible for: • Leading the technical delivery of automation and robotics projects from pre-build through to customer handover, • Overseeing pre-build, assembly and testing of systems at OAL's Peterborough facility, • Managing on-site installation, commissioning and go-live at customer factories, • Acting as the primary engineering contact for customers during project delivery, • Coordinating the work of commissioning engineers, installation engineers and software engineers on your projects, • Managing project budgets and timelines, keeping delivery on track, • Diagnosing and resolving technical issues, both during pre-build and on site, • Producing and maintaining project documentation for OAL and customer records, • Providing training to customer teams on systems and applications Your skills probably already fit This role suits experienced engineers who have delivered automation projects end to end. If you have led installations, managed customer relationships on site and taken ownership of technical outcomes, you already have the core of what we need. Relevant technical experience includes: • Machine vision: camera systems, inspection, verification, • PLC and industrial controls: programming, commissioning, fault-finding, • Robotics: industrial robots, safety systems, cell integration, • SCADA and HMI: Ignition, or similar platforms, • Systems integration: getting multiple technologies to work together reliably on a production line You do not need food manufacturing experience. The engineering is transferable. You will learn the specifics of food production environments during project delivery. What you should expect from us, and what we expect from you We will be direct about this, because it helps both sides. You own the delivery. This is not a role where you follow someone else's plan. You are accountable for the technical outcome of your projects, from pre-build quality through to customer satisfaction after handover. The work is hands-on, both at OAL and on site. You will spend time in OAL's workshop overseeing pre-builds and time at customer factories leading deployments. These are real production environments: chilled, ambient, high-care. Travel is part of the role. Customer sites are across the UK. Deployment phases require time on site, including overnight stays. We ask for flexibility around this, and we are realistic about planning it. The split between Peterborough and customer sites shifts through the year depending on the project pipeline. You will manage people and priorities. You coordinate the engineers working on your projects. You manage budgets and timelines. You make decisions when things do not go to plan. Go-live periods are pressurised. When a production line is scheduled to start, the system has to work. You will need to lead calmly and effectively when timelines are tight and the customer is watching. Standards are high. OAL delivers automation systems that run 24/7. The projects you deliver have to be reliable, documented and supportable long after handover. In return, you get: • Full ownership of projects from workshop to live production, • Variety across different customers, sites and technologies, • Exposure to the complete automation stack: vision, robotics, controls, SCADA, software, • A team of capable engineers who take the work seriously, • The satisfaction of seeing a system you built and delivered running reliably in a customer's factory, • Degree or equivalent qualification in engineering, IT or a related discipline, • Five or more years of hands-on experience delivering automation or systems integration projects, • Proven ability to lead project delivery and manage customer relationships on site, • Comfortable working with PLC systems, Windows environments, networking and SQL databases, • Strong fault-finding and troubleshooting ability across multiple technologies, • Able to manage project budgets and timelines, • Clear communicator who can work effectively with engineers, factory operations staff and senior customer stakeholders, • Full UK driving licence The mission you are contributing to OAL automates UK food manufacturing. Food factories face labour shortages, tightening compliance requirements and pressure on costs. The projects you deliver directly address those problems. You will deliver packaging verification systems that prevent product recalls, robotic cells that replace repetitive manual work, and vision systems that catch errors human inspection cannot sustain. These systems run on live production lines across the UK. You will build them at OAL, deploy them at customer sites, and see them operating in the factories long after handover. JBRP1_UKTJ

VCF Consultant - SC Cleared Location: Hybrid - a couple of days per month in the Midlands Duration: 3 Months Start: Immediate Rate: Inside IR35 - £850 per day Job Description We are seeking an experienced SC Cleared VCF Consultant with strong expertise in VMware Cloud Foundation (VCF9) and NSX. The successful candidate will support a VCF9 greenfield engagement, working closely with the Lead Architect, customer and key suppliers to deliver and implement the agreed design. This role is focused on hands-on deployment, implementation support and technical consultancy across the full lifecycle of the VCF9 platform. Key Responsibilities • Support the delivery of VCF9 greenfield deployments, implementing and configuring the platform in line with agreed designs., • Contribute to design and requirements workshops, providing practical input from a deployment and delivery perspective., • Produce and maintain deployment documentation and workbooks, including build guides, configuration steps and as-built documentation., • Carry out installation, configuration and validation of VCF9 components, including NSX, ensuring alignment with standards and best practice., • Troubleshoot and resolve technical issues across VCF and NSX components during deployment and early life support., • Collaborate with architects, engineers and third-party suppliers to ensure smooth and coordinated delivery., • Active SC Clearance., • Proven experience delivering VCF deployments in a consultant or engineer capacity., • Strong hands-on experience with VCF9 and NSX., • Good understanding of VMware Cloud Foundation architecture and supporting technologies., • Experience working in customer-facing environments alongside multiple stakeholders and suppliers., • Strong troubleshooting and problem-solving skills., • Effective communication skills with the ability to explain technical concepts clearly., • VMware certifications such as VCP or VCAP., • Experience supporting large-scale cloud or infrastructure transformation programmes. JBRP1_UKTJ

About the job Job summary DevOps Engineer Are you passionate about collaborative working and problem solving? Do you enjoy using your technical skills to help teams work more effectively, and get software into the hands of users with speed and stability? Are you looking for a new role in an organisation that treats you as an individual and supports you on your professional and career development journey? Then this is the role for you! We have an exciting opportunity for a DevOps Engineer, within the Platform Engineering group, during the IPO digital transformation journey. Working within an established team, this role provides an opportunity to turn innovative ideas into customer value using a range of technologies and delivery platforms. Key Tech: Azure DevOps Pipelines (including for Microsoft Dynamics 365 pipelines), scripting, Azure, Terraform, Microsoft Power Automate Cloud flows (training provided where there are specific skill gaps) Working Style This role will be carried out in-line with IPO Hybrid working arrangements where staff are currently expected to spend at least 20% of their time working onsite from one of our offices. This role is based in our Newport Office . The requirement for attendance at an office location can vary by role so we would encourage candidates to discuss working arrangements with the recruiting manager to agree a reasonable balance between working from home and the office Job description Main duties consist of but are not limited to: • Support all aspects of the software development lifecycle, applying DevOps principles and to lead on developing, implementing, enhancing and managing DevOps practices following agreed processes and best practices., • Working on the design, release and implementation of automated, repeatable, efficient delivery pipelines and holds responsibility for the management, delivery and improvements of the deployments onto Production., • Act as the DevOps engineer for Releases and troubleshooting of issues, with support from other engineers., • Providing administration, configuration and troubleshooting support for CI & CD pipelines and hosted container applications., • Working on delivery, integration, administration and configuration of DevOps tools. This includes tools for source control, build, CI & CD, code reviews, security scans, configuration automation, test automation, artefact management, monitoring and alerting., • Conducting reviews and quality checks for newly delivered code and be an advocate for security and performance standards in the organisation., • Implementing and configuring DevOps specific monitoring, alerting, auditing and notification strategies., • Contributing to technical decisions and directions in a collaborative team environment, including solution architecture, estimations, product planning and user stories., • Attending Team and Agile Scrum ceremonies., • Understanding of DevOps principles and experience of working in a DevOps or iterative development culture., • Demonstrable experience of using continuous integration (CI) and continuous deployment (CD) tools, including pipeline implementation., • Awareness of automated testing and embedding this in CI/CD pipelines., • Strong troubleshooting and problem solving skills with experience in service support., • Substantial development or scripting experience in one or more of the following:, • Python, • Bash, • PowerShell, • Substantial experience in administration and configuration of Azure DevOps Pipelines (preferred) or other CI/CD orchestration tools., • Substantial experience supporting the build and deployment of, or coding in one or more of the following or equivalent:, • Python, • .Net Core / C#, • NextJs / Node frontend, • Experience with Infrastructure as Code such as Terraform, • Experience in containerisation technologies and platforms such as Docker or Azure container services such as Azure App Services, Azure Functions, Azure Logic Apps or Azure Container Registry or equivalent., • Experience in managing and supporting distributed source code repositories (Git)., • Upload an anonymised copy of your current CV. Please remove all identifying markers such as name, title, education institution etc., • Working Together, • Developing Self and Others, • Unlimited Pluralsight video learning access, • Access to Microsoft's ESI training suite, • Hybrid working with no core hours, • Substantial support for career progression, • 25 days annual leave moving to 30 days in annual increments, • UK nationals, • nationals of the Republic of Ireland, • nationals of Commonwealth countries who have the right to work in the UK, • nationals of the EU, Switzerland, Norway, Iceland or Liechtenstein and family members of those nationalities with settled or pre-settled status under the European Union Settlement Scheme (EUSS) (opens in a new window), • nationals of the EU, Switzerland, Norway, Iceland or Liechtenstein and family members of those nationalities who have made a valid application for settled or pre-settled status under the European Union Settlement Scheme (EUSS), • individuals with limited leave to remain or indefinite leave to remain who were eligible to apply for EUSS on or before 31 December 2020

Role: Senior Electrical Engineer Location: Sheffield OR Newark on Trent Salary: Competitive + Bonus + Healthcare + Pension The company: My client is a leading environmental technology company specializing in clean energy solutions for the transport and infrastructure markets. Their focus is on the generation and supply of zero-emission power, particularly through the use of green hydrogen systems. With a strong emphasis on innovation, sustainability, and practical deployment, the organisation partners with businesses across construction, events, and heavy industry to deliver cleaner, more efficient power solutions, through their HPU’s Due to group wide expansion, they are now looking to hire an experienced Electrical Engineer to support with both their Hydrogen power generation and HPU manufacturing divisions. This role can be from either their Sheffield or Newark on Trent offices The Role: • Read and understand technical specifications and customers’ requirements., • Develop and review Electrical and project documentation such as Cable Calculations and Selectivity studies (using OEM Software), Load Lists, Lighting Calculations (DIALux and RELux), Cable, Load and Block Line Diagrams (BLD’s), Single Line Diagrams (SLD’s), Termination Diagrams, Cable Routing Diagrams, Equipment General Arrangement Drawings, Datasheets, User Requirement Specifications (URS), Control Philosophies and Functional Design Specifications (FDS). • Develop and Review design packages for electrical systems and equipment (e.g. Power & Distribution Transformers, generators, high voltage/ low voltage switchgear / Motor Control Centre (MCC), distribution networks, control equipment, power outlets etc.) including drawings, detail scope of work, calculations, Bill of Material / Quantity and preliminary cost estimates. • Ensure that the electrical systems and main plant equipment used are safe, reliable, and cost effective and that they conform to clients’ specifications and applicable electrical codes and standards. • Compile technical files to support certification against appropriate directives., • Liaise with clients and be able to provide technical solutions and specific contract requirements., • Carry out detailed site surveys for electrical equipment and installations., • Liaise with vendors and evaluate technical aspects of vendor quotations and make recommendations. • Review and respond to technical and site queries., • Provide technical assurance for electrical discipline deliverables for projects., • Work to tight deadlines to ensure contracts are completed within time and budget., • Report progress to project team/engineering manager and advise of any scope changes to capture any Engineering Change Notices as and when required. • Review contractor Change Notices to ensure the scope is required and complies with the project codes and standards and is within budget and schedule constraints. • Provide cost estimate support to Projects for Electrical, Instrumentation and Control systems., • Involve and participate in document standardization, good practices of engineering design and development tools. Your experience & Qualifications • Candidates must demonstrate a passion for zero emission / renewable energy, • Candidates must be Degree qualified within Engineering, Physics or Mathematics (required standard: 1st class degree (desirable), PhD, or equivalent) • A very high level of competence within electrical engineering from first principles with the ability to be the technical authority • A good level of competence within mechanical and controls engineering fields, • Knowledge of hydrogen fuel cells (desirable), • Experience of working with LV, MV & HV power systems, • Capable of presenting engineering concepts to peers and discuss proposals in detail, • Ability to self-lead R&D work, • Knowledge of and experience of working with relevant directives and standards, • Ability to liaise, coordinate and communicate with a range of audiences of varying technical backgrounds and abilities • Holding CEng status or working towards this (desirable)

Senior Automation Engineer Location: Peterborough | Full-time, Permanent | Competitive salary depending on experience If a food factory's production line is running reliably six months after handover because the integration was done correctly and the documentation was complete, that is your standard. You develop, support and own the technical quality of automation systems that run in UK food factories. You are the technical authority on your work. You follow controlled processes, maintain accurate configuration records, and take ownership of issues through to full resolution. The work spans PLC controls, SCADA, HMI systems, MES integration, industrial networking and OT/IT architecture. You will act as a Level 3 escalation resource for complex automation support tickets. You will need to diagnose problems methodically under pressure and communicate clearly with both engineering teams and customer operations staff. If you have proven experience developing and supporting industrial automation systems and you want a role where getting it right matters, where process, precision and accountability are valued, this role is built for that. What this role actually looks like The work moves between development, support escalation and project delivery. Some periods are desk-based: programming, documenting, reviewing architectures and maintaining configuration control. Others require you to be on site at a customer facility, working through a commissioning phase or resolving a live production incident. On development and project work, you configure and support PLC, SCADA, MES and integration solutions across customer environments. You ensure all changes follow controlled processes and documented procedures. You maintain version management across automation platforms and contribute to the standardisation of engineering practices across OAL's project and support contracts. On escalation and support, you act as the Level 3 resource for complex automation and OT/IT incidents. You take ownership of high-impact issues through to full resolution, provide structured root cause analysis and corrective action reports, and maintain clear escalation pathways. You make sure SLA response and resolution targets are met. A typical week depends on where your projects and support contracts sit in the cycle. During development phases you will be at OAL's Peterborough base, configuring systems and running tests. During deployment or go-live phases you will be at customer sites leading commissioning or resolving issues. Between projects you will be involved in architecture reviews, knowledge base development and SOP improvement. Your skills probably already fit This role suits engineers who have built, supported and improved industrial automation systems in structured environments. If you have acted as a senior technical resource, worked to defined procedures and SLAs, and taken ownership of complex incidents, you already have the core of what we need. Relevant technical experience includes: • PLC and industrial controls: Rockwell, Siemens TIA Portal, Mitsubishi or equivalent programming, commissioning, fault-finding, • SCADA and HMI: iFix, FactoryTalk, Ignition, Wonderware or similar platforms, • Systems integration: getting multiple technologies to work together reliably on a production line, • Industrial communication protocols: Ethernet/IP, PROFINET, MQTT, fieldbus and integration principles, • OT/IT infrastructure: Windows Server, SQL Server, industrial networking, VMware or VEEAM You do not need food manufacturing experience. The engineering is transferable. You will learn the specifics of food production environments through project delivery and customer support work. What you should expect from us, and what we expect from you We will be direct about this, because it helps both sides. You are accountable for technical accuracy. Whether you are writing a SCADA configuration, responding to an escalation or supporting a go-live, the quality and correctness of your work is your responsibility. We will support you with clear processes, good tooling and experienced colleagues. The work is methodical. You will follow documented procedures, maintain version control, produce structured reports and communicate to a defined standard. Engineers who find structure useful rather than frustrating thrive here. This is not a role where informal or undocumented work is acceptable. Escalation periods require calm under pressure. When a production line is down and the customer is waiting, you need to diagnose, decide and act clearly. We need engineers who work through problems systematically, even when the stakes are high. Standards are high. OAL delivers automation systems that run 24/7. The work you do the configurations you maintain, the documentation you produce, the decisions you make under pressure directly affects whether a customer's line stays running. Travel is part of the role. Customer sites are across the UK. Deployment and commissioning phases require time on site. We ask for flexibility around this and we are realistic about planning it. In return, you get: • A role with clear scope, defined responsibilities and the tools to do the job properly, • Exposure to a wide range of automation technologies: PLC, SCADA, MES, networking, OT/IT integration, • Variety across different customers, sites and technologies, • A team of engineers who take quality seriously, • The satisfaction of knowing the systems you support are genuinely reliable because of how carefully you work, • Proven experience developing and supporting PLC, SCADA and HMI systems, • Strong knowledge of at least one major automation platform (Rockwell, Siemens TIA Portal, Mitsubishi), • Experience working within structured support or managed service environments, • Experience acting as a senior escalation point for complex automation or OT/IT incidents, • Solid understanding of industrial communication protocols and integration principles, • Ability to interpret P&IDs and electrical drawings, • Strong troubleshooting, root cause analysis and technical documentation skills, • Comfortable working to defined procedures and service level agreements, • Full UK driving licence The mission you are contributing to OAL automates UK food manufacturing. Food factories face labour shortages, tightening compliance requirements and pressure on costs. The systems you develop and support directly address those problems. You will work on packaging verification systems that prevent product recalls, robotic cells that replace repetitive manual work, and vision systems that catch errors human inspection cannot sustain. These systems run on live production lines across the UK. You will build them, commission them, support them and make sure they keep running long after the project closes. Interested Click on APPLY today! We do not need a long cover letter. Tell us what systems you have worked on, what platforms you are comfortable with, and what interests you about this role. JBRP1_UKTJ

Site Reliability Engineer (Security Cleared) • Salary to £60k + Company Options Scheme Overview This company is a Workflow & AI Orchestration Specialist. They're on a mission to modernise how public sector organisations manage casework, derive insight from data and deliver citizen services. Theyre growing fast and looking for bright, dynamic people to help build their business. Role Theyre looking for a (Security Cleared) Site Reliability Engineer (SRE) to join their growing platform and delivery teams. Youll help design, build, and operate reliable, secure, and performant infrastructure that underpins critical public-sector services. Youll combine your background in DevOps, cloud engineering, and automation with a focus on reliability, observability, and scalability. Youll also work with event-driven technologies, identity and access management, and data platforms, ensuring our orchestration solutions are resilient, secure, and future-ready. This is an exciting opportunity for an engineer who thrives on solving complex infrastructure and automation challenges, automating everything, and shaping secure-by-design delivery environments. Key Responsibilities Design, deploy, and manage containerized workloads using Kubernetes and Red Hat OpenShift Provision and manage infrastructure using Terraform Build and operate scalable infrastructure in Amazon Web Services (AWS) Design, implement, and maintain robust CI/CD pipelines Improve system reliability, observability, performance, and security Implement monitoring, logging, and alerting solutions Troubleshoot production incidents and perform root cause analysis Collaborate with development teams to improve application resilience and deployment processes Required Skills & Experience Experience in Site Reliability Engineering, DevOps, or similar roles Strong hands-on experience with Kubernetes and container orchestration Experience working with Red Hat OpenShift in production environments Proficiency in infrastructure as code using Terraform Solid experience with Amazon Web Services (AWS) Experience designing and maintaining CI/CD pipelines NB: Please only apply if you already have UK Security Clearance (SC). Other Stuff NB: for non-UK Citizens; we cannot accept applications from anyone requiring sponsorship (now or in the future) for UK permanent employment you are utilising a work visa this must allow you to work in the UK unrestricted for at least the next 5 years. Profile 29 recruitment keywords: Site Reliability Engineer Site Reliability Engineering, DevOps Kubernetes container orchestration Red Hat OpenShift Terraform Amazon Web Services AWS CI/CD Bash Python monitoring observability cloud architecture London hybrid remote AI artificial intelligence security cleared security clearance SC JBRP1_UKTJ

Introduction Saab UK is part of Scandinavia's largest defence company, bringing together the best of Swedish and British innovation. Saab offers world-leading solutions and services in defence, aviation, space, and civil security to keep people and society safe. Our UK presence has been growing at pace, meaning we can offer a wide range of opportunities for personal fulfilment and career growth. We currently employ over 600 people across eight sites in the UK, and our specialisations include software engineering, underwater robotics, radars, AI, and armed forces training. The Role: This a 6 Months Contract Role. You'll join Saab UK's Public Safety Solutions business unit where we develop and deploy Command, Control, and Communication (C3) and a team dedicated to developing mission-critical software solutions that help police, fire and rescue services, ambulance dispatchers, airports, and public transport agencies coordinate and respond to incidents that matter. As a Software Engineer within Radio, you'll play a key role in building and maintaining our digital radio solutions, ensuring seamless, reliable, and secure voice and data connections across diverse and demanding environments. Your work will directly contribute to saving lives and keeping societies safe. Key Responsibilities: * Design, develop, and maintain radio software solutions. * Work with modern protocols and technologies (e.g. SIP and 3GPP) * Collaborate with cross-functional Agile teams to deliver high-performance, scalable, and resilient systems. * Work with our partners and customers to build tomorrow's solutions * Comprehend an existing solution and work towards MVP´s * Continuously explore and implement new technologies that enhance our communication capabilities. * Participate in end-to-end system design, from architecture to deployment. Qualifications and Skills: Essential: * A degree in Computer Science, Engineering, or similar. * Experience with digital radio systems * Solid programming skills C#.NET Core and experience of DevOps. * A passion for developing robust, real-world software that helps people and communities. * Strong communication skills and an eagerness to learn and share knowledge. * Experience in multithreaded applications * Test driven development TDD * Source control as Git * Strong communication skills both with the team and externally * BDD * Distributed services * Team City (CICD) or similar Desirable: * SIP signalling/RTP Realtime Transport Protocol * SQL * Docker * Wireshark * Linux By submitting an application to Saab UK you consent to undertaking workforce screening activities that may include but are not limited to: Baseline Personnel Security checks, National Security Vetting, reference checks, verification of working rights and in all circumstances preferred candidates will be placed through a security interview.

Belcan Workforce Solutions are recruiting for a Scada Engineer - ADMS Energy systems. 12 month - Inside IR35 contract role. UK remote based with trips to UK & Europe offices as required. Job Description We're looking for a Scada Engineer to connect our customers with our technologies and products. Our team is involved in ADMS (Advanced Distributions Management System) related projects, tackling problems ranging from analysing data to providing solutions for varied customer business requirements. Our product is deployed in distribution companies worldwide and is leading in the growing market of Energy Utilities. Our software solutions deliver reliability, productivity, innovation, and efficiency through a modular architecture, adaptive algorithms, predictive analytics, and a brilliant user experience. Roles and Responsibilities Lead and manage the migration of SCADA systems into ADMS platforms. Leverage your expertise to ensure smooth transitions and integration of legacy systems into new ADMS SCADA environments. Install and configure SCADA simulation systems to support testing, training, and operational simulations. Ensure accurate modelling of SCADA environments to meet system requirements. Handle the installation and configuration of Front-End Processors (FEP) and Enhanced Front-End Processors (EFEPS), ensuring seamless communication between SCADA systems and remote devices. Conduct thorough SCADA testing, validating the system's functionality, performance, and reliability. Identify and resolve issues, ensuring the system meets operational requirements. Provide expert consultancy to clients, delivering workshops and training sessions to enhance their understanding and utilisation of SCADA systems. Share best practices and ensure clients are equipped to manage and optimize their SCADA environments. Lead the deployment and commissioning of ICCP (Inter-Control Centre Communications Protocol), ensuring proper integration of multiple control centres and seamless data communication. Stay current with emerging SCADA protocols and technologies, continuously expanding your knowledge to ensure the implementation of the latest best practices and industry standards. Required Skills & Experience: Extensive experience in ADMS SCADA migration and integration. Proven expertise in the installation and configuration of SCADA simulation systems. Solid knowledge of Front-End Processors (FEP) and Enhanced FEPs (EFEPS) installation and configuration. Strong hands-on experience in SCADA testing, troubleshooting, and optimisation. Experience providing consultancy, workshops, and training to clients on SCADA systems. Practical knowledge of ICCP deployment and commissioning. Passion for learning and staying updated on new SCADA protocols and technologies. Strong problem-solving and analytical skills. Excellent communication and customer-facing skills. Preferred Qualifications: Familiarity with a variety of SCADA protocols (e.g., IEC 61850, DNP3, Modbus, etc.). Experience with SCADA systems in the energy or utilities sector is a significant advantage. Any experience working with ADMS, OMS, and DMS systems in utility or energy sectors. Relevant certifications in SCADA systems, ADMS, or energy management technologies. xrnqpay Ability to work independently and in cross-functional teams. This vacancy is being advertised by Belcan Do you have the right skills and experience for this role Read on to find out, and make your application.

Desktop Build & Deployment Engineer. Desktop Build & Deployment Engineer.

This role is the first of it's kind within the business, and they are now looking for an deployment engineer with a growth mindset who wants to join their journey, build/deliver a deployment process, and facilitate further growth in the area of field operations. Track system performance post-deploym

A dynamic technology firm in Greater London seeks experienced backend or full-stack professionals.The role involves working directly with clients to build customized solutions and integrating with various systems.Ideal candidates will have over 5 years of experience in Python and TypeScript, possess

The ideal candidate will possess a strong engineering background, exceptional communication skills, and experience with large engineering teams. An innovative AI company in Greater London seeks a Partner Deployed Engineer to empower Global Systems Integrators in deploying AI solutions. Responsibilit

A leading technology firm is seeking a Deployment Engineer to support the integration of software platforms across diverse environments. Ideal candidates will have experience managing production deployments, CI/CD workflows, and a strong grasp of Linux systems.

A leading AI solutions provider is seeking a Forward Deployed Engineer to join their team in the UK. The ideal candidate will have 3 to 7+ years of experience in software or data engineering, proficiency in Python or TypeScript, and experience with AI technologies like LLMs.

An IT support services company is looking for an IT Support Engineer / Deployment Technician to assist in deploying Microsoft Teams Phone and unified communications across customer sites in the UK.

A connectivity provider is looking for an Infrastructure Engineer in the UK to join their project delivery team.

A leading technology firm in Greater London is looking for a Senior Software Deployment Engineer to lead the delivery, configuration, and rollout of applications across complex environments. You'll work closely with various engineering teams to ensure high-quality releases, requiring a strong unders

We’re hiring a Deployment Engineer to work on solving real-world technical problems in a mission-critical environment, close to end users. This role sits at the intersection of advanced AI and high-performance hardware, helping move cutting-edge systems from research into real-world deployment. Yo

A leading GPU cloud service provider in the United Kingdom is seeking a Datacenter Deployment Engineer to plan and organize physical deployments of GPU infrastructure.

A technology recruitment agency is seeking a Device Deployment Engineer for an initial 6-month contract in Wirral. This role involves deploying over 2000 devices, monitoring equipment availability, and guiding staff through the deployment process.

A leading technology firm in London is seeking a Technical Pre-Sales Prototyper / Forward Deployment Engineer. This role combines engineering, product, and business development, requiring skills in building prototypes and customer engagement.

You’ll work closely with software engineers, product teams, and platform specialists to ensure seamless deployments that support millions of customers and thousands of colleagues. Mindera are currently looking for a Software Deployment Engineer to deliver, configure, test, and roll out software an

A tech-focused firm is seeking a Forward Deployed Engineer to oversee the deployment lifecycle across various enterprise clients in the UK. This hybrid role requires 3 to 7+ years in software or data engineering, proficiency in Python or TypeScript, and experience with AI technologies.

Amazon Web Services (AWS) is looking for a Network Deployment Engineer to build Amazon Dedicated Cloud regions as part of our Infrastructure Operations team. As a Network Deployment Engineer, you will work in a dynamic environment to drive the stability and sustainability of our next-generation netw

It is well suited to engineers who enjoy working across infrastructure and applications, improving deployment workflows, and supporting complex distributed systems in production. This role combines elements of deployment engineering, infrastructure automation, and operational support. Work with engi

Experience in technical pre‑sales, forward‑deployment, or field engineering roles. If you’re an entrepreneurial engineer who thrives in ambiguity, loves building quickly, and wants to see the immediate impact of your work with customers, this role is for you. Act as a forward‑deployed engine

A financial crime prevention firm in Greater London seeks a Senior Forward Deployment Engineer to lead technical solutions and implementations.

A recruitment firm seeks multiple AV Engineers for a large-scale Microsoft Teams Rooms deployment across the UK.

A leading technology venture firm in the United Kingdom is looking for a Forward Deployed Engineer to drive adoption of its AI infrastructure platform.

A UK cyber security firm is seeking a Generative AI Engineer to design and implement AI solutions leveraging generative models. The role involves developing AI models, optimizing prompts, and ensuring secure deployment.

A leading global quantitative fund is looking for a Machine Learning Engineer to enhance how models are built and deployed. The role combines solution architecture, software engineering, and infrastructure, emphasizing automation and CI/CD for machine learning. Join to accelerate model deployment an

A leading Conversational AI startup in the Greater London area seeks a Senior Forward Deployed Engineer to drive complex deployment projects in enterprise environments. Candidates should have over 7 years of experience in software engineering or related fields and expertise in systems integrations.

A leading software firm in the UK is seeking a Software Deployment Engineer to deliver and configure software solutions across environments. You will collaborate with various teams to ensure seamless software deployments, testing, and troubleshooting. Ideal candidates will have experience in deploym

A leading technology company in Greater London is seeking an Implementation Engineer to transform utility and geospatial data into accurate digital twin models of electricity networks. This role involves ingesting massive datasets and serving as a technical liaison to ensure successful deployments.

Take ownership of small-scale deployment projects from planning to turn-up, under close guidance of a senior engineering mentor. As an intern, you will be paired with a dedicated mentor from the Deployment team who will guide you through the end-to-end lifecycle of infrastructure planning and execut

A defence technology company in Greater London seeks Forward Deployed Engineers to manage operational software systems in real-world environments. Candidates should have a solid foundation in software engineering, especially in languages like Python or C++, and the ability to thrive in fast-paced, a

If you’ve also worked in the following roles, we’d also like to hear from you: IT Support Technician, Field IT Technician, Unified Communications Technician, Deployment Engineer, Telecoms Technician, Technical Support Engineer, IT Field Engineer, IT Field Support Engineer. IT Support Engineer /

A leading design and manufacturing company in East Midlands is seeking a dedicated Project Engineer to join their team. Candidates should have technical qualifications in electrical or electronic engineering and proficiency in relevant software.

A leading global online food delivery marketplace is looking for a Senior Engineer to join their Enterprise AI team.

Lead AI Engineers | Outside IR35 | London (1–3 days/week) | 6-Month Contract. We’re hiring two hands‑on Lead AI Engineers to extend and enhance an AI Operating System powered by LLMs, delivering industry‑specific solutions across defence, legal, health, infrastructure and consulting. Develop

The role involves understanding client requirements, delivering technical solutions, and translating challenges into engineering improvements. A mission-driven defence technology company is seeking a Forward Deployed Engineer to deploy and optimize software systems in operational environments.

A leading technology company in Greater London is seeking a motivated Senior ML Engineer to build and deploy machine learning systems aimed at transforming legal document analysis.

The AI Deployment Engineering team ensures the safe and effective deployment of Generative AI applications for developers and enterprises. As an AI Deployment Engineer you will help customers across various industries transform their businesses through applications such as customer service automatio

A leading IT services provider is seeking an IT Support Engineer / Deployment Technician to enhance Microsoft Teams Phone deployments across the UK.

A pioneering company in financial crime intelligence seeks a Forward Deployed Engineer to enhance customer deployments and streamline solutions.

A leading technology company in the UK is seeking a Forward Deployed Engineer to ensure technical success across the full customer lifecycle. The ideal candidate will have over 10 years of experience in technical deployment, exceptional communication skills, and a strong ability to solve problems.

A technology company in Greater London is seeking a skilled Computer Vision Engineer to bridge machine learning research and production.