Electrical apprenticeship jobs in BingleyCreate job alerts

Field Service Engineer \n Bradford - with UK-wide travel \n Salary IRO £40K PA \n The Role \n We are looking for a multi-skilled Field Service Engineer to join our clients growing team specialising in packaging machinery. \n They sell, install, service and provide customer training on a varied range of equipment, primarily filling and capping machinery. \n The successful candidate will work from our clients Bradford base as well as travelling to customer sites throughout the UK to install, service and maintain machinery. \n Key Responsibilities \n\n • Installation and commissioning of packaging machinery\n, • Servicing, maintenance and fault finding\n, • Electrical and mechanical troubleshooting\n, • Working with PLCs and electrical control systems\n, • Providing technical support to customers\n, • Training customers on the operation and maintenance of equipment\n, • Working on filling, capping and other packaging machinery\n, • Completing work both independently and as part of the engineering team\n, • Travelling to customer sites throughout the UK\n\n Experience & Skills \n We are looking for a multi-skilled engineer, ideally with a stronger electrical background combined with good mechanical knowledge. \n Experience in the following would be advantageous: \n\n • Packaging or production machinery\n, • PLC fault finding\n, • Electrical fault finding and controls\n, • Mechanical maintenance\n, • Machinery installation and commissioning\n, • Customer training and technical support\n\n Candidates who have recently completed an engineering apprenticeship and gained relevant hands-on machinery experience will also be considered. \n Travel \n The position involves regular travel to customer sites throughout the UK, with approximately 5-6 nights away from home per month. \n There may also be occasional travel to Ireland and Europe, although this is infrequent. \n Ideal Candidate \n This role would suit a practical, customer-focused engineer who enjoys varied work and is comfortable travelling. You should be confident fault finding, working independently at customer sites and communicating with customers in a professional manner. \n HMIND INDHM

Mechanical Maintenance Engineer Location: Bradford Salary: £43,000 per annum (dependent on experience) Hours: 37.5 hours per week, Monday to Friday, 8:00am–4:00pm Job Type: Permanent, Full Time The Role We are recruiting for a Mechanical Maintenance Engineer to join an established manufacturing operation in Bradford. Working as part of the engineering team and reporting to the Operations Manager, you will be responsible for maintaining processing plant and equipment, carrying out planned and reactive maintenance, and supporting the site in maximising plant reliability and reducing downtime. This is an excellent opportunity for an experienced Mechanical Engineer with some electrical maintenance experience who is looking to join a well-established organisation offering training, benefits and long-term development. Key Responsibilities Carry out planned preventative maintenance to maximise plant reliability and minimise downtime. Undertake planned and emergency mechanical and electrical repairs on processing equipment. Diagnose faults and carry out effective fault finding during breakdown situations. Complete follow-up actions and accurately record maintenance activities using SAP or a CMMS system. Develop Risk Assessments and Method Statements for engineering activities. Work alongside contractors during planned maintenance and engineering projects. Manage and maintain appropriate stock levels of machinery spares and consumables. Ensure all maintenance activities are completed safely and in line with industry best practice. Support continuous improvement and identify opportunities to improve equipment reliability and efficiency. About You The successful candidate will have: A recognised apprenticeship in Mechanical Engineering. Previous experience working in a manufacturing, processing or industrial environment. Practical experience of mechanical maintenance and repair. Some previous experience of electrical maintenance and fault finding. The ability to diagnose and resolve mechanical and electrical equipment faults. Good written and verbal communication skills. A strong understanding of Health & Safety procedures and safe working practices. Experience using SAP, CMMS or maintenance management systems would be advantageous but is not essential. A flexible, proactive and team-focused approach to work. The ability to work independently and remain calm when dealing with emergency breakdowns. Benefits £43,000 salary, dependent on experience. 37.5-hour working week, Monday to Friday. 24 days' holiday plus bank holidays, rising to 27 days with service. Company bonus scheme, dependent on business performance. Personal Pension Plan. Cycle to Work scheme. Free on-site parking. Company mobile phone provided for occasional out-of-hours contact. Full training provided on SAP/CMMS systems where required. Apply Today If you are a Mechanical Maintenance Engineer, Mechanical Engineer, Maintenance Engineer or Multi-Skilled Engineer with manufacturing or processing experience and are looking for your next permanent opportunity in Bradford, we would be keen to hear from you. Apply today with your CV to be considered for this position

We are currently recruiting for a Mechanical Maintenance Engineer at a major manufacturing and distribution site in Bradford on a permanent basis. Salary is c£42,000 per annum (negotiable, depending on experience) plus 24 days’ holiday (rising with service years) and bank holidays, company bonus, pension etc. About the Mechanical Maintenance Engineer role: Reporting to the Operations Manager, you will be responsible for carrying out mechanical and electrical maintenance and breakdown repairs on production plant and equipment, while supporting the overall reliability and performance of the site. Key Responsibilities Plan and carry out preventative maintenance activities to maximise plant reliability. Undertake both planned and emergency repairs in a safe and timely manner. Accurately record maintenance work using the company’s maintenance system (SAP/CMMS). Follow industry best practice and all site safety procedures. Prepare Risk Assessments and Method Statements for engineering activities. Work alongside contractors during planned maintenance periods. Manage and maintain stock levels of spare parts and consumables. Carry out fault-finding and diagnostics during breakdown situations. To be successful in this Mechanical Maintenance Engineer role, you should have: A recognised apprenticeship in Mechanical Engineering. Experience within a processing, production, or manufacturing environment. Some experience of electrical maintenance. Strong written and verbal communication skills. Experience of using a CMMS/SAP system and working within structured health and safety processes would be beneficial, but full training will be provided. How to apply for the Mechanical Maintenance Engineer: Please call Rebecca at Simply Recruitment Group or press APPLY NOW

Field Service Engineer Bradford - with UK-wide travel Salary IRO £40K PA The Role We are looking for a multi-skilled Field Service Engineer to join our clients growing team specialising in packaging machinery. They sell, install, service and provide customer training on a varied range of equipment, primarily filling and capping machinery. The successful candidate will work from our clients Bradford base as well as travelling to customer sites throughout the UK to install, service and maintain machinery. Key Responsibilities Installation and commissioning of packaging machinery Servicing, maintenance and fault finding Electrical and mechanical troubleshooting Working with PLCs and electrical control systems Providing technical support to customers Training customers on the operation and maintenance of equipment Working on filling, capping and other packaging machinery Completing work both independently and as part of the engineering team Travelling to customer sites throughout the UK Experience & Skills We are looking for a multi-skilled engineer, ideally with a stronger electrical background combined with good mechanical knowledge. Experience in the following would be advantageous: Packaging or production machinery PLC fault finding Electrical fault finding and controls Mechanical maintenance Machinery installation and commissioning Customer training and technical support Candidates who have recently completed an engineering apprenticeship and gained relevant hands-on machinery experience will also be considered. Travel The position involves regular travel to customer sites throughout the UK, with approximately 5-6 nights away from home per month. There may also be occasional travel to Ireland and Europe, although this is infrequent. Ideal Candidate This role would suit a practical, customer-focused engineer who enjoys varied work and is comfortable travelling. You should be confident fault finding, working independently at customer sites and communicating with customers in a professional manner. HMIND INDHM

Description My client situated in Bradford are looking for a Maintenance engineer for their busy manufacturing factory on a contintental shift pattern of 4 on 4 off days & nights. Role Purpose - Maintenance engineer Working in an FMCG food production site you will deliver effective and efficient service support for all manufacturing equipment. You will be responsible for maintaining and improving process, packing and ancillary equipment through daily job management and improvement activities. Role Accountabilities: Maintenance engineer Ensure breakdowns are addressed and repaired in a timely manner. Fault find, diagnose and rectifying both mechanical and electrical faults Deliver equipment preventative maintenance schedule to avoid machine downtime. Continuous improvement activities to drive to improve machine uptime, ensure compliance with company policies and procedures, standards of operation, and safe operating procedures. Project work as and when required To carry out any other reasonable management instruction to the expected standards which ultimately supports the business. Skills, Experience and Qualifications: Maintenance engineer Recognised Electrical or multi skilling qualification or time served apprenticeship. Previous experience within a manufacturing or FMCG environment would be advantageous Ability to investigate, diagnose and rectify faults to a proven level of competency is required. Experience with electrical, single, 3 phase, motors and inverters, as well as PLCs fault finding experience and mechanical, pneumatics, bearings and drives experience is required throughout this role. Previous experience with root cause analysis is advantageous A sound understanding of health and safety standards is required with experience of hygiene procedures, standards and equipment in the food industry is desirable. * Ability to record in writing or by the use of computers, various information such as work done, time taken, material used etc, in the appropriate equipment logbook or asset history file in accordance with record retention where required

Maintenance Engineer Location: Bradford, West Yorkshire Salary: £23.91 per hour (£43,421 basic salary) + 10% night shift allowance + overtime opportunities Contract: Permanent Shift Pattern: Customer Demand Led Rota (CDLR) - 3 x 12-hour shifts per week (1816 annualised hours) The Opportunity We're looking for a Maintenance Engineer to join a well-established manufacturing site in Bradford. The role involves a mix of planned preventative maintenance and reactive breakdown work across a variety of production machinery. Around 70% of the workload is mechanically focused, making this a great opportunity for either a mechanically biased or multi-skilled engineer who enjoys fault finding and problem solving. Key Responsibilities Carry out planned preventative maintenance (PPM) and reactive breakdown repairs. Diagnose and rectify mechanical and electrical faults. Maintain production machinery and associated equipment. Work on conveyors, bearings, motors, pulleys, timing belts, sensors and pneumatic equipment. Support continuous improvement and reliability initiatives. Complete maintenance records using maintenance management systems. Assist with machine installations, testing and commissioning activities. Work closely with production teams to minimise downtime and maximise performance. Ensure all maintenance activities are carried out safely and in line with company procedures. What We're Looking For We're open to engineers from a variety of manufacturing backgrounds. Whilst an electrically biased engineer would be advantageous, strong mechanically biased engineers with some electrical fault-finding experience are also of interest. Essential Experience working as a Maintenance Engineer, Multi-Skilled Engineer, Mechanical Maintenance Engineer or Electrical Maintenance Engineer. Manufacturing or production maintenance experience. Experience carrying out reactive and preventative maintenance. Strong fault-finding and problem-solving skills. Experience working on production machinery. Knowledge of conveyors, bearings, motors and mechanical drive systems. Good communication and teamwork skills. Positive attitude and willingness to learn. Multi-skilled maintenance background. Electrical fault-finding experience. Experience working with: Pneumatics Hydraulics Sensors Timing belts Pulleys Lathes Milling machines PLC fault finding Experience within packaging, FMCG, food manufacturing, plastics, recycling or other manufacturing environments. Qualifications Essential Engineering apprenticeship, NVQ, City & Guilds or equivalent engineering qualification. Previous maintenance engineering experience. Desirable Mechanical or Electrical Engineering qualification. Multi-skilled engineering training. Additional electrical qualifications. Shift Pattern & Benefits £23.91 per hour (£43,421 basic salary). Additional 10% night shift allowance. Overtime opportunities available. 3 x 12-hour shifts per week. Annual rota provided in advance. Annualised hours contract (1816 hours per year). Maximum of four working days per week. 25 days annual leave plus 8 bank holidays. 20 protected holiday days. Pension scheme through Legal & General with employer contributions up to 11%. Training and development opportunities. Excellent work-life balance. Why Join? Join a stable manufacturing business with approximately 130 employees onsite. Supportive and experienced engineering team. Opportunity to work on a broad range of manufacturing equipment. Training available to help develop your skills and career. Annual rota provided in advance, offering excellent visibility of your working year. Genuine long-term career opportunity within a business that values attitude, reliability and continuous development. The Ideal Candidate The successful candidate will be someone who: Has a solid maintenance engineering background. Enjoys fault finding and problem solving. Takes pride in their work and working environment. Works well as part of a team. Has a stable employment history. Is looking to continue learning and developing their engineering skills. Wants to build a long-term career within a supportive engineering environment. If you receive suspicious outreach claiming to be from us, please contact us via the ManpowerGroup website. TPBN1_UKTJ

Working in an FMCG food production site you will deliver effective and efficient service support for all manufacturing equipment. You will be responsible for maintaining and improving process, packing and ancillary equipment through daily job management and improvement activities. • Ensure breakdowns are addressed and repaired in a timely manner., • Fault find, diagnose and rectifying both mechanical and electrical faults, • Deliver equipment preventative maintenance schedule to avoid machine downtime., • Continuous improvement activities to drive to improve machine uptime, ensure compliance with company policies and procedures, standards of operation, and safe operating procedures., • Project work as and when required, • To carry out any other reasonable management instruction to the expected standards which ultimately supports the business., • Recognised Electrical or multi skilling qualification or time served apprenticeship., • Previous experience within a manufacturing or FMCG environment would be advantageous, • Ability to investigate, diagnose and rectify faults to a proven level of competency is required., • Experience with electrical, single, 3 phase, motors and inverters, as well as PLCs fault finding experience and mechanical, pneumatics, bearings and drives experience is required throughout this role., • Previous experience with root cause analysis is advantageous, • A sound understanding of health and safety standards is required with experience of hygiene procedures, standards and equipment in the food industry is desirable., • Ability to record in writing or by the use of computers, various information such as work done, time taken, material used etc, in the appropriate equipment logbook or asset history file in accordance with record retention where required. £51912/annum Casual dress, pension, training Permanent BD8, Bradford, West Yorkshire #J-18808-Ljbffr

Company description: Water Utility Company based in Yorkshire region of England. Job description: Senior Project Engineer SI/ICA Hello! Thanks for stopping by. Let us tell you about all the great reasons to join us here at Yorkshire Water: • We offer a competitive salary, depending on experience, 4a, £52,955 - £67,891, • A company car benefit, • Annual incentive related bonus (£1000 maximum bonus opportunity for the performance year), • Attractive pension scheme (up to 12% company contribution), • Development opportunities in line with the Senior Project Engineer progression plan, • 25 days annual leave plus bank holidays plus two extra wellness days!, • Life assurance cover of 4 times pensionable salary, • A great benefits package choose from health cash plan scheme, critical illness insurance, dental insurance, life assurance flex and partner cover., • Retail savings scheme, • Online GP service, cycle to work scheme, gym membership discounts and many more! Location: Hybrid working with regular travel to Yorkshire Water sites and offices. Work type:?Permanent. 37 hours per week, Monday Friday. We have an exciting opportunity for a?Senior Project Engineer to join the Asset Delivery team at Yorkshire Water and be a part of helping Yorkshire Water to provide the best service to our customers. Could this be you? What we do: Everyone has an idea of what a water company does. Here in Yorkshire, we make sure that over 5.4 million people living in the region and the millions of people who visit our region each year, can rely on our services, and have clean and safe drinking water on tap and that their wastewater is taken away. But for us, its so much more than this. We look after communities, protect the environment, and plan to look after Yorkshires water, today, tomorrow 24/7, 365 days a year. We provide essential water and wastewater services to every corner of the Yorkshire region, and play a key role in the regions health, wellbeing, and prosperity. New environmental legislation, unprecedented levels of investment and changing expectations from customers means that this is an exciting time to discover opportunities within the water industry. Programme Delivery are a key part of how we plan to meet the changing expectations of customers and regulators. The Programme Delivery department is accountable for delivering the Capital Construction Programme. This is achieved by delivering intelligent Totex solutions, through collaboration, for sustainable out-performance. The Department is also accountable for commercial and contractual arrangements across the supply chain and to deliver leading and world class contract management processes. The purpose of the department is to achieve best value for money from our Capital Programme, by optimising our resources, monitoring and tracking the effectiveness and efficiency of our supply chain commercial arrangements, through; • Reducing cycle time in the project delivery process;, • Maintaining, or enhance service;, • Embracing a collaborative approach through our supply chain;, • Working in a safe environment;, • Delivering out performance against targets identified in collaborative out performance plans. Specialist Projects is a stream within Programme Delivery led by Engineers from various disciplines. Undertaking the roles of Client, Principal Designer and Principal Contractor we manage the end to end design process and utilise a wide ranging supply chain to deliver engineering construction schemes across Clean Water, Waste Water and Networks. Where you fit in: As our Senior Project Engineer you will; • Provide technical supervision and line management of a team of Project Technicians, • Technically manage and coordinate the design and safe delivery of engineered MEICA projects within the Specialist Projects portfolio, • Ensure that the delivery of all projects complies with the requirements of the CDM regulations undertaking the role of Principal Contractor and supporting the Client & Principal Designer, • Ensure adherence to YW Engineering specification and associated documentation, • Drive excellent standards and performance in health and safety, risk management and control of work to ensure compliance with the YW safety Policy, • Ensure that robust financial management and commercial awareness form the foundation of all business decisions What skills & qualifications you will need: • ICA based apprenticeship or Engineering degree or equivalent ONC/HNC/BTEC in ICA Engineering, • Understands the principles of control of works Permits, POWRA, RAMS etc, • Understands the major processes and the effects/role of MEICA equipment in this, • Has a broad experience with electrical and ICA equipment and can use this experience to produce engineered solutions to resolve business risks and other issues, • Has a thorough understanding and working knowledge of the CDM regulations and their practical application, • Has a good understanding of the design and project delivery process including hazard identification, risk assessment and site supervision, • Ability to respond/answer to a wide range of specific technical and non-technical detailed queries, • Understands and has experience of working to ATEX standards, • Applies formal SI & ICA project development and delivery procedures ie URS, SRS, P&IDs, FDS, FAT, SAT & O&Ms, • Detailed knowledge and understanding of SI & ICA best practice and standards, • Experience of optimising SI control systems in a complex ICA technology landscape. You will also benefit from having: • Experience working in a regulated utility or major asset management / delivery with a wide-ranging asset base, • Previous experience in a commercially orientated and or regulated environment, • Knowledge of the application of SI, Automation and Instrumentation technologies in a water utility environment., • Understands and applies BS7671, BSEN 61511, BSEN 13849 and BSEN 62061 and other relevant legislation / standards, • Knowledge of Schneider PLC platform, Mitsubishi (IEC 61131) and Allen Bradley HMI/PLC systems and software and iFix SCADA., • Understand process safety activities and documentation ie; Engineering Risk Assessment/Safety Reviews, We embrace a flexible working model, where our hybrid setup typically requires an average of 1 to 2 days in the office per week and working on our operational sites. This could be slightly more when collaborative efforts, training or meeting deadlines demand it. For those who prefer to work on-site, our office is open Monday-Friday during working hours. If youre an experienced Senior Project Engineer professional and want to help us deliver exceptional service for our customers whilst protecting the environment, then apply today to find out what a career with Yorkshire Water can offer for you. Accessibility We are committed to removing barriers and ensuring our recruitment process is accessible to everyone. We offer a range of adjustments to make your application experience as comfortable and straightforward as possible. If you have an accessibility need, disability, or condition that requires changes to the recruitment process, please include this information in your application. We will then discuss any reasonable adjustments required. Just a heads-up! We might start interviewing and close the position earlier based on the response. To make sure youre considered, please send in your application as soon as you can. If successful for the role, you will be required to undergo pre-employment checks that will include a Basic Disclosure Check, carried out through a Third-Party Company, prior to commencing employment. Depending on the role, you may also be required to go through the security vetting process for either a Counter Terrorist Check or Security Check clearance. All our roles are subject to a medical questionnaire, and further medicals when required. No agencies please JBRP1_UKTJ

Carding Maintenance Engineer Shifts: 4on4off Salary: circa £60,000 (+ up to £8,000 relocation support + optional enhanced overtime) Somerset, UK Are you a time-served engineer with hands-on carding experience? Do you understand fibre behaviour, machine tolerances and the fine adjustments needed to keep carding lines running smoothly? Yolk Recruitment are supporting a rapidly growing world leading textile manufacturer who have increased turnover by more than 150% in five years. With continued investment across the site, they're looking for a Carding Maintenance Engineer to support an existing team with carding machinery performance, reliability and quality. This is a rare opportunity to relocate to the South West and join a specialist process-driven manufacturer where your carding experience genuinely matters. This is what you'll be doing You'll be responsible for maintaining, repairing and optimising a range of carding machinery and fibre-processing equipment. Your work will ensure stable production, consistent web formation and minimal downtime. Responsibilities include: 1. Carrying out planned preventative maintenance (PPM) on carding machines, 2. Responding to mechanical and electrical breakdowns across the carding lines, 3. Diagnosing faults on cylinders, strippers, doffers, workers, lickers-in, feed systems and delivery sections, 4. Performing alignment, clearance setting, tensioning and fine adjustments to maintain fibre flow and web quality, 5. Working on machinery such as Trtzschler, Spinnbau, Herguth, TAM or similar carding equipment, 6. Supporting rebuilds, strip-downs and card clothing changes as required, 7. Collaborating closely with production teams to resolve quality issues and improve machine performance, 8. Contributing to root cause analysis, asset care and continuous improvement activity, 9. Sharing knowledge with apprentices, fellow engineers and operators to build internal capability, 10. Ensuring all work is completed safely and in line with company procedures Experience & Qualifications Essential: • Proven hands-on experience with carding machinery (standard cards, strippers, or equivalent), • NVQ Level 3 or equivalent in Mechanical Engineering, • Strong mechanical fault-finding and strip-down ability, • Good electrical awareness (motors, sensors, drives, inverters), • Experience working within textiles, nonwovens or fibre-processing environments, • Ability to work independently and diagnose machine performance issues, • Understanding of web formation, fibre movement and carding tolerances Desirable: • Experience with Trtzschler, Spinnbau, Herguth, TAM or similar brands, • Apprenticeship in carding or textile engineering, • Exposure to continuous improvement or reliability projects And this is what you'll get in return: • £60,000 basic salary, • Up to £8,000 relocation support for candidates moving to the Bridgwater area, • 22 days holiday + 8 bank holidays (rising to 25 with service), • Christmas & New Year shutdown, • Pension - 4% employer / 5% employee, • Full company uniform, • On-site parking, • Access to Wellbeing 360 - discounts, GP services, wellbeing tools and more, • Bike2Work scheme, • A secure long-term role with a financially strong and growing manufacturer Are you up to the challenge? If this sounds like the right fit, I'd love to hear from you. Please get in touch today with engineering specialist recruiter Liam Reid. Apply with your CV - and feel free to include a short note about your experience with carding machinery. We also offer a referral scheme if you know someone suitable. Please note: due to the high volume of applications, we may not be able to contact everyone. If you haven't heard back within 7 days, please assume you have not been shortlisted on this occasion. JBRP1_UKTJ

Multiskilled Maintenance Engineer (Electrical Bias) Sherburn-in-Elmet Continentals (12-hour Days & Nights, 4 on, 4 off) £48,500 We are looking for a motivated Multiskilled Maintenance Engineer to join a market leading company in their respective field. Reporting directly to the maintenance manager you will be a key member in ensuring the production facility is kept running. You will be involved in all aspects of planned and reactive maintenance within their operation. With progressive training and development this company is always looking to enhance its employees and their skill sets, whilst additionally being supported by a welcoming team of engineers. The position will appeal to a strong engineer looking for their next challenging role within in a secure and stable company. Role Description • Providing both Reactive & PPM maintenance, • Working on a variety of machinery, • Being involved in facilites work, • Fault Finding both Electrical & Mechanical, • Working in a fast paced environment, • Hydraulics and Pneumatics Skills and Qualifications • Time Served Apprenticeship, • Relevant Engineering Qualifications, • Experience in manufacturing desirable, • Fast Paced Environment Experience Advatageous In return for your commitment my client offers a stable and secure career for a technically motivated engineer. If you feel this is of interest, please call Jay Hextallfor a confidential discussion on 01455 413218, alternatively you can email for further details. JBRP1_UKTJ

GM Performance Power Units - Concord, NC Gearbox Test Technician - Onsite Job Summary The Gearbox Test Technician is responsible for the hands-on preparation, operation, and maintenance of transmission test rigs within a high-performance Formula 1 environment. Working closely with test engineers and design teams, this role ensures gearbox systems are installed, instrumented, and tested accurately and efficiently to meet demanding performance and reliability targets. This position is critical to delivering high-quality test data and maintaining the safe, reliable operation of advanced test facilities. Key Responsibilities Test Rig Operation • Operate gearbox and driveline test rigs in accordance with defined test procedures., • Monitor test parameters including torque, speed, temperature, and pressure., • Support execution of durability, performance, and validation test programs., • Identify and escalate abnormal behavior or test issues. Build, Strip & Preparation • Assemble and disassemble gearboxes, sub-systems, and test assemblies., • Prepare units for testing including cleaning, inspection, and measurement., • Install and remove components safely and to precise specifications., • Ensure all builds meet engineering drawings, specifications, and torque settings. Instrumentation & Setup • Install and verify instrumentation such as thermocouples, pressure sensors, and strain gauges (basic support)., • Assist with wiring, routing, and validation of test measurements., • Support calibration and validation of sensors and data acquisition systems. Maintenance & Facility Support • Maintain test rigs, tooling, and equipment in operational condition., • Perform routine maintenance and inspections., • Support troubleshooting of mechanical and basic electrical issues., • Ensure compliance with safety procedures and best practices. Data & Documentation • Record test data, observations, and issues during test runs., • Support engineers in logging results and maintaining accurate records., • Assist with test reports, build sheets, and inspection documentation. Collaboration • Work closely with test engineers, design engineers, operations, and maintenance teams., • Provide feedback on build quality, recurring issues, and test rig improvements. Required Qualifications • Technical diploma, apprenticeship, or equivalent in Mechanical Engineering, Automotive Technology, or Motorsport Engineering., • 2+ years in a hands-on mechanical or test environment (motorsport preferred)., • Strong mechanical assembly and disassembly skills., • Knowledge of mechanical systems, components, and precision measurement tools (micrometers, gauges, torque wrenches)., • Basic understanding of instrumentation, data acquisition, hydraulic and lubrication systems., • Ability to read engineering drawings and technical documentation., • High attention to detail and quality workmanship., • Strong problem-solving ability in a hands-on environment., • Good communication and teamwork skills., • Ability to work efficiently under pressure and tight deadlines. Preferred Qualifications • Experience with gearboxes, engines, or rotating machinery., • Experience in dyno or test cell environments. Working Conditions • Factory-based, workshop and test cell environment., • Hands-on role with exposure to mechanical systems, noise, and machinery., • Shift work, evening, or weekend hours may be required during peak testing periods. Key Performance Indicators (KPIs) • Test rig uptime and reliability., • Accuracy and quality of build/assembly work., • Efficiency of test setup and turnaround times., • Compliance with safety and operational procedures., • Contribution to successful test execution. Ready to be part of a team that pushes boundaries both on and off the track? At GM Performance Power Units, we are developing a new era of performance for the Formula 1 grid. Joining us means entering a startup racing environment backed by a legacy of engineering excellence, giving you the rare opportunity to help build a world-class program from day one. We believe in rewarding innovation and powering potential. As part of our team, you’ll benefit from a competitive and comprehensive package designed to support your performance, well-being, and future, helping you thrive at every level. That includes access to: • Bonus scheme, • Private healthcare, • 401(k) plan including company match, • Employer-paid life insurance and disability coverage, • 32 days annual leave (including holidays), • Free financial advisor access, • Employee Assistance Programs (EAP), • Subsidized on-site dining, • On-site gym, • Discounted GM vehicle purchase/lease program, • Free on-site EV charging for personal GM vehicles It’s all part of our commitment to creating a workplace that’s as high-performing and forward-thinking as the people who make it succeed. Join us and help power what’s next. Why Join Us You’ll play a pivotal role in ensuring the reliability and performance of a next-generation Formula 1 power unit. Our culture rewards precision, innovation, and the relentless pursuit of performance. Please note: GM Performance Power Units and all affiliated companies are Equal Opportunity employer(s). Minorities, women, veterans, and individuals with disabilities are encouraged to apply. For more information regarding the EEOC, please visit https://www.eeoc.gov/employers/upload/posterscreenreader_optimized.pdf. Only direct hires need apply to or inquire about job postings at GM Performance Power Units. We are not accepting calls, resumes or applications from recruiting firms at this time.

Mechanical Maintenance Engineer Location: Bradford Salary: £43,000 per annum (dependent on experience) Hours: 37.5 hours per week, Monday to Friday, 8:00am–4:00pm Job Type: Permanent, Full Time The Role We are recruiting for a Mechanical Maintenance Engineer to join an established manufacturing operation in Bradford. Working as part of the engineering team and reporting to the Operations Manager, you will be responsible for maintaining processing plant and equipment, carrying out planned and reactive maintenance, and supporting the site in maximising plant reliability and reducing downtime. This is an excellent opportunity for an experienced Mechanical Engineer with some electrical maintenance experience who is looking to join a well-established organisation offering training, benefits and long-term development. Key Responsibilities • Carry out planned preventative maintenance to maximise plant reliability and minimise downtime., • Undertake planned and emergency mechanical and electrical repairs on processing equipment., • Diagnose faults and carry out effective fault finding during breakdown situations., • Complete follow-up actions and accurately record maintenance activities using SAP or a CMMS system., • Develop Risk Assessments and Method Statements for engineering activities., • Work alongside contractors during planned maintenance and engineering projects., • Manage and maintain appropriate stock levels of machinery spares and consumables., • Ensure all maintenance activities are completed safely and in line with industry best practice., • Support continuous improvement and identify opportunities to improve equipment reliability and efficiency. About You The successful candidate will have: • A recognised apprenticeship in Mechanical Engineering., • Previous experience working in a manufacturing, processing or industrial environment., • Practical experience of mechanical maintenance and repair., • Some previous experience of electrical maintenance and fault finding., • The ability to diagnose and resolve mechanical and electrical equipment faults., • Good written and verbal communication skills., • A strong understanding of Health & Safety procedures and safe working practices., • Experience using SAP, CMMS or maintenance management systems would be advantageous but is not essential., • A flexible, proactive and team-focused approach to work., • The ability to work independently and remain calm when dealing with emergency breakdowns. Benefits • £43,000 salary, dependent on experience., • 37.5-hour working week, Monday to Friday., • 24 days' holiday plus bank holidays, rising to 27 days with service., • Company bonus scheme, dependent on business performance., • Personal Pension Plan., • Cycle to Work scheme., • Free on-site parking., • Company mobile phone provided for occasional out-of-hours contact., • Full training provided on SAP/CMMS systems where required. Apply Today If you are a Mechanical Maintenance Engineer, Mechanical Engineer, Maintenance Engineer or Multi-Skilled Engineer with manufacturing or processing experience and are looking for your next permanent opportunity in Bradford, we would be keen to hear from you. Apply today with your CV to be considered for this position

Join a Team That Lives Its Values We are recruiting for an experienced Multi-Skilled Engineer with a strong electrical bias to join a successful, local and family-run manufacturing business, working across sites in Grassington and Keighley. This is an excellent opportunity for an experienced engineer looking to join a business that genuinely values its people, encourages continuous improvement and offers the opportunity to develop your skills further. The company believes in taking ownership, striving for excellence, doing the right thing and achieving more by working together – while enjoying the journey along the way. The Role Working as part of the Engineering team, you will play a key role in ensuring plant, machinery and equipment operate safely, reliably and efficiently. You will be responsible for both planned and reactive maintenance, fault finding and continuous improvement across a range of automated manufacturing equipment. Key Responsibilities Complete planned preventative maintenance (PPM) activities and help develop improved maintenance practices Diagnose and repair electrical and mechanical equipment faults promptly to minimise downtime Carry out day-to-day maintenance and improvements across plant, machinery, assets and services Undertake electrical fault finding and repairs Fault-find, repair and programme PLC-controlled equipment Maintain automated electro-mechanical systems Work with pneumatic, hydraulic and instrumentation-controlled systems Identify and implement improvements to increase machine efficiency, reliability and output Support continuous improvement and engineering projects Install and commission new equipment when required Ensure all engineering work complies with Health & Safety and food safety standards Accurately complete engineering and shift documentation Support effective stock control of engineering parts and equipment Use Computerised Maintenance Management Systems (CMMS) effectively Communicate engineering issues clearly with colleagues and other departments Skills & Experience We are looking for an experienced Multi-Skilled Engineer who is particularly strong electrically. The successful candidate will ideally have: An Electrical Engineering Apprenticeship or equivalent NVQ Level 3, ONC Electrical Engineering, BTEC Level 3 Electrical/Electronic Engineering or equivalent qualification 17th or 18th Edition Wiring Regulations Strong electrical fault-finding and diagnostic skills PLC fault-finding, repair and programming experience – this is essential Strong mechanical knowledge alongside your electrical expertise Experience working with automated electro-mechanical manufacturing equipment Knowledge of pneumatic, hydraulic and instrumentation-controlled systems A minimum of 5 years' experience within a manufacturing, packaging or processing environment Previous FMCG or process manufacturing experience Experience of food manufacturing would be advantageous Knowledge of facilities plant, including steam boilers and refrigeration, would be beneficial Experience using CMMS systems Knowledge of modern manufacturing and continuous improvement techniques such as 5S, LEAN and TPM An understanding of HACCP principles would be advantageous About You Alongside your technical experience, we are looking for someone who: Has a proactive, hands-on approach to engineering Is confident working under pressure and solving problems quickly Takes ownership and responsibility for their work Has a strong work ethic and positive, can-do attitude Is keen to continue learning and developing their engineering skills Works well as part of a collaborative team Can communicate technical and engineering matters effectively across different departments Has good written and verbal communication skills Is reliable, flexible and committed As the role involves working across Grassington and Keighley, candidates must hold a full UK driving licence and have their own transport. What's on Offer? • £21.26 per hour, • 48-hour working week over just 4 days, • 24 days' annual leave, • Company uniform, • Health plan, • Bike and car schemes, • BUPA private healthcare, subject to 5 years' service, • Opportunity to join an established, local and family-run business, • Supportive team environment, • Opportunity to develop your technical skills and engineering career This is a fantastic opportunity for an experienced Multi-Skilled Engineer / Electrical Engineer looking for a varied role where you can make a genuine impact on equipment performance, reliability and continuous improvement. If you have a strong electrical background, excellent fault-finding skills and experience within a manufacturing environment, we would love to hear from you. Apply today for immediate consideration

Field Service Engineer Bradford - with UK-wide travel Salary IRO £40K PA The Role We are looking for a multi-skilled Field Service Engineer to join our clients growing team specialising in packaging machinery. They sell, install, service and provide customer training on a varied range of equipment, primarily filling and capping machinery. The successful candidate will work from our clients Bradford base as well as travelling to customer sites throughout the UK to install, service and maintain machinery. Key Responsibilities Installation and commissioning of packaging machinery Servicing, maintenance and fault finding Electrical and mechanical troubleshooting Working with PLCs and electrical control systems Providing technical support to customers Training customers on the operation and maintenance of equipment Working on filling, capping and other packaging machinery Completing work both independently and as part of the engineering team Travelling to customer sites throughout the UK Experience & Skills We are looking for a multi-skilled engineer, ideally with a stronger electrical background combined with good mechanical knowledge. Experience in the following would be advantageous: Packaging or production machinery PLC fault finding Electrical fault finding and controls Mechanical maintenance Machinery installation and commissioning Customer training and technical support Candidates who have recently completed an engineering apprenticeship and gained relevant hands-on machinery experience will also be considered. Travel The position involves regular travel to customer sites throughout the UK, with approximately 5-6 nights away from home per month. There may also be occasional travel to Ireland and Europe, although this is infrequent. Ideal Candidate This role would suit a practical, customer-focused engineer who enjoys varied work and is comfortable travelling. You should be confident fault finding, working independently at customer sites and communicating with customers in a professional manner. HMIND INDHM

Role: Electrical Installation Lecturer Location: West Yorkshire Type: Temporary - Full Time Rate: £35 - £45 per hour Eden Brown are seeking an enthusiastic and knowledgeable Electrical Installation Lecturer for a Further Education College. This a full time temporary role for ongoing cover. About the role: The successful candidate will deliver engaging and high-quality teaching across a range of electrical installation programmes, which may include Level 2 and Level 3 Electrical Installation, apprenticeship provision, and specialist units such as inspection, testing, and wiring regulations. You will also contribute to curriculum planning, assessment, and the ongoing development of the department. Candidates must: - Hold a recognised electrical qualification (NVQ Level 3, AM2, or equivalent) and current industry knowledge - Possess up-to-date technical knowledge of industry standards and regulations - Be committed to delivering innovative, student-focused teaching - Hold or be willing to work towards a recognised teaching qualification (e.g. PGCE, CertEd) Candidates must have a current DBS If this could be of interest to you please contact Callum Boyle on (phone number removed) or Eden Brown Synergy is an equal opportunities employer. Eden Brown Limited is a limited company registered in England and Wales with registered number (phone number removed). Our registered address is 5th floor 4 Coleman Street, London, EC2R 5AR, part of nGAGE Specialist Recruitment Limited T/A nGAGE Talent. Please consider the environment before printing this e-mail. This message is intended solely for the addressee and may contain confidential information. If you have received this message in error, please send it back to us, and immediately and permanently delete it. Do not use, copy or disclose the information contained in this message or in any attachment. We take reasonable precautions to ensure no viruses are present in this email but cannot accept responsibility for any loss or damage sustained as a result of computer viruses and the recipient must ensure that the email (and attachments) are virus free

We have an exciting opportunity for a Fitter/Service Support based in Castleford for one of our clients on a Full time permanent basis. Summary of the Fitter/Service Support role Salary: £35,000 Location: Castleford Type of Contract: Permanent Hours: 37.5 hours – Monday – Thursday 8.15am-4.30pm & Friday 8.15am - 1.45pm Responsibilities of the Fitter/Service Support De-contamination of pump units Dismantling, inspection and reporting of pump unit condition Identification of spare parts required from drawings Mechanical measurements of components Electrical inspection, assembly and testing of pumps Assisting within other departments when required Requirements for a successful Fitter/Service Support Confined space training Overhead crane, Lifting & slinging operator licence Water Hygiene qualified Full clean driving license Mechanical Engineering apprenticeship or similar or time served Experience in Electric motor & control equipment Fault finding skills Ability to read and understand engineering drawings * Forklift licenses About Allstaff Recruitment We’re an independent recruitment specialist based in Bedfordshire, supporting businesses across Bedford, Milton Keynes, and surrounding areas. We recruit for permanent, temporary, and contract roles across multiple sectors. Check out our jobs page for our latest vacancies in your area and follow us on Facebook, LinkedIn and Twitter. **Thank you for your interest in this role. One of our Recruitment Specialists will review your application shortly. Due to the high volume of applications, we regret that we can’t respond to everyone directly. If you don’t hear from us within seven days, please assume you have not been successful this time

Are you an experienced Maintenance Technician who enjoys fault-finding rather than simply replacing parts? Do you take pride in getting to the root cause of machinery failures? Would you like to join a global manufacturer where your engineering expertise really makes a difference? DENSO Marston Ltd, based in Shipley, West Yorkshire, is part of the global DENSO Corporation, one of the world's leading automotive technology manufacturers. We design and manufacture high-performance heat exchange units and cooling modules for leading OEMs across the off-highway, construction and agricultural sectors. We're looking for a skilled Maintenance Technician with either an Electrical or Mechanical bias to join our night shift maintenance team. This role focuses on diagnosing faults, maintaining production machinery and improving equipment reliability across a diverse range of manufacturing equipment, from well-established legacy machines through to newer automated systems. Working Hours & Benefits Night Shift Monday Thursday: 10:00pm 6:00am Friday: 4:00pm 9:00pm Benefits include: 25 days holiday plus bank holidays Stakeholder Pension Scheme (up to 10% employer contribution) Life Assurance (4x salary) Permanent Health Insurance (PHI) Subsidised canteen Discounted gym membership Employee Assistance Programme Discounts across hundreds of UK retailers Free onsite parking Key Responsibilities Diagnose, fault-find and repair production machinery Respond quickly and safely to equipment breakdowns Carry out planned preventative maintenance Interpret electrical schematics, pneumatic diagrams and mechanical drawings Work across a broad range of manufacturing equipment, including legacy machinery Record maintenance activity accurately using the CMMS system Support continuous improvement and equipment reliability Maintain high standards of safety and housekeeping Essential Experience & Qualifications Time served engineering apprenticeship Minimum ONC, City & Guilds Level 3 or equivalent At least two years' maintenance experience within manufacturing Strong electrical and/or mechanical fault-finding skills PLC fault-finding experience Experience working with production machinery Experience of root cause analysis and reliability improvements Comfortable working independently and as part of a team Required Skills Strong diagnostic and problem-solving ability Methodical approach to fault-finding Good understanding of electrical and/or mechanical systems Safe working practices and isolation procedures Excellent organisational and communication skills If you're looking for a role where every day brings a new engineering challenge and you can genuinely influence equipment performance within a global manufacturing business, we'd love to hear from you. TPBN1_UKTJ

We have an exciting opportunity for a Mobile Pump Field Service Workshop Engineer based in Castleford for one of our clients on a Full time permanent basis. Summary of the Mobile Pump Field Service Workshop Engineer role Salary: £40,000 Location: Castleford Type of Contract: Permanent Hours: 37.5 hour working week – Monday – Thursday 8.15am – 4.45pm, Friday – 8.15am – 1.45pm Responsibilities of the Mobile Pump Field Service Workshop Engineer * De-contamination of pump units prior to inspection * Dismantling, inspection and reporting or pump condition * Assembly and testing of pumps * Identification of spare parts * Electrical inspection of pumps * Diesel pumpset repair and maintenance * Collecting/delivering of pumps/equipment if required Requirements for a successful Mobile Pump Field Service Workshop Engineer * Mechanical or Electrical apprenticeship or similar or time served * Electric motor & control equipment experience * Previous experience of pumps & rotating equipment * Ability to read and understand engineering drawings * Full driving license * Experience in Diesel pump sets * Fault finding skills About Allstaff Recruitment We’re an independent recruitment specialist based in Bedfordshire, supporting businesses across Bedford, Milton Keynes, and surrounding areas. We recruit for permanent, temporary, and contract roles across multiple sectors. Check out our jobs page for our latest vacancies in your area and follow us on Facebook, LinkedIn and Twitter. **Thank you for your interest in this role. One of our Recruitment Specialists will review your application shortly. Due to the high volume of applications, we regret that we can’t respond to everyone directly. If you don’t hear from us within seven days, please assume you have not been successful this time

Electrical Apprenticeship Assessor.

Are you an experienced electrical specialist and leader looking to shape the next generation of trade professionals? Windsor Forest Colleges Group is seeking a dynamic Electrical Apprenticeship Programme Lead to manage, oversee, and elevate our Electrical Apprenticeship provision at our Slough & Lan

Relief Social Care Assistant, St Brendans (3066).Distant Islands Allowance per hour).You will work enthusiastically as a member of a team that promotes and supports Adults with Support Needs to actively take part within local resources and facilities, to maximise their inclusion, independence and pl

Applications for this post will only be accepted from current employees of West Lothian Council (this includes casual and agency staff who are currently undertaking work for us).Secondment opportunities must be discussed with your current line manager prior to submitting an application for this post

This is a casual, part-time role offering flexible working.As a Bank Care Assistant at a Barchester care home, you'll help residents enjoy each day by making sure they get the quality care and support they deserve.You'll assist with daily living, providing support and companionship and sharing great

Senior Care Assistant – Glenrothes, Fife (KY7).Deliver exceptional care as a Senior Care Assistant with Newcross Healthcare.Are you a compassionate Senior Care Assistant looking for flexibility, great pay, and career development? At Newcross Healthcare, we value and support our health and social c

Social Care Assistant, St Brendans (3327).You will work enthusiastically as a member of a team that promotes and supports Adults with Support Needs to actively take part within local resources and facilities, to maximise their inclusion, independence and planned outcomes.This can be within a variety

As a Care Assistant at a Barchester care home, you'll help residents enjoy each day by making sure they get the quality care and support they deserve.You'll assist with daily living, providing support and companionship and sharing great moments and memories too.It's a chance to bring your dedication

We're so much more than an energy company.We're a family of brands revolutionising how we power the planet.One team of 21,000 colleagues that's energising a greener, fairer future by creating an energy system that doesn't rely on fossil fuels whilst living our powerful commitment to igniting positiv

We are currently in search for a CSCS Labourers to work on small scale commercial project in Seaton area,for a commercial construction client.Main Duties - Strip out, heavy lifting, putting materials in Skip and other general duties required.If you are interested in this Vacancy then please contact

Electrical Maintenance Engineer (AP) FM Service Provider - Commercial Building Stratford, East London up to £55,000 + Package. Electrical Maintenance Engineer. This is a great opportunity for an electrically qualified engineer who already has.

Applicants must be hard working and have previous site experience preferably working with Joiners.We are a construction company and NOT an agency.

Be all you can be with Hamberley.At Hamberley, we believe that our residents deserve something 'Extra Special, Every Day' and we're recruiting for a Care Assistant to help us achieve our goals.At Meryton Place, our Care Assistants are called Homemakers.More than support workers, care assistants or h

Rapid response to electrical and mechanical breakdowns, fault finding and repair Delivery of planned preventative maintenance (PPM) to maximise uptime Work on a diverse range of equipment - bespoke machinery, drives, motors, hydraulics, pneumatics PLC fault finding (Siemens, I/O level) Support conti

What’s on offer £50k+ salary – negotiable depending on experience Monday–Friday days No nights Evenings and weekends free Regular training and development Relevant courses and upskilling Established business with strong engineering investment Genuine opportunities to develop

Waking Night Complex Care Assistant (Tracheostomy).Superior Healthcare is seeking compassionate and dedicated Carers, Support Workers, and Complex Care Assistants to support a young lady with a.This is a rewarding opportunity to provide specialist one-to-one care, ensuring the client's safety, comfo

We have a great opportunity for a part time cleaner to join our team in Bradford Location: BD3 7HB Hours: 3 PM to 6 PM, Monday to Friday, 15h a week Pay: £12.PAYE Job type: TEMP, initially until 3rd of November Cleaning experience and a valid DBS, issued in the last 12 months, are essent

Clearchoice are looking for an.Afternoon / early Evening Cleaner.Batley (WF17) on a perm basis working 15 hours per week.In this role you will clean to the highest standard of hygiene whilst carrying out all aspects of health and safety whilst maintaining a professional manner with all members of st

Hours of Work: Continental Shifts, 7am to 7pm / 7pm to 7am.Salary: £55,800 + shift allowance.My client are currently seeking a Continential Shift Maintenance Engineer for a role based at Canary Wharf.This is a static role within a corporate building and working with a team of engineers, you will be

Diagnose and rectify mechanical, electrical and pneumatic faults.

Hours) Are you an experienced Electrical Maintenance Engineer seeking your next exciting challenge? Our client, a leading specialist manufacturer of high-quality engineered products, is on the lookout for a skilled and proactive Electrical Maintenance Engineer to enhance their established maintenan

Diagnosing and fault-finding on both mechanical and electrical systems across the factory floor.

Air Conditioning Service & Maintenance Engineer Salary: £35,000 – £50,000 DOE Location: South & South West England Hours: 40 hours per week Employment: Permanent Travel: Some staying away required for a specific contract Benefits & Package * £35,000 – £50,000

Interpret electrical schematics and work confidently with 415V motor controls.

Mechanical Maintenance Engineer (Manufacturing)Up to 45k + Bonus + Benefits.A well-established SME manufacturing organisation is seeking a.The company operates large-scale manufacturing equipment supplying sectors such as defence and offshore energy.This role would suit a hands-on engineer with stro

Line Maintenance Control Engineer Arden White Aerospace & Aviation Recruitment are currently supporting a well established aviation organisation in the recruitment of a.Line Maintenance Control Engineer.This is an excellent opportunity for an experienced aviation maintenance professional to join a b

In this role, you will be responsible for carrying out planned and preventative mechanical and electrical maintenance, servicing and fault finding across a range of equipment, including conveyors, motors and gearboxes.

Labourers Our client is a market leader in modular building solutions, providing innovative and high-quality services across a range of industries.We are currently seeking a dedicated and hardworking Labourer to join our team in Devon Role Overview: As a Labourer, you will play a vital role in su

As an Electrical Maintenance Technician, your responsibilities will include:. Carrying out electrical maintenance and repairs on production machinery, plant and equipment. Electrical Maintenance Technician.

As the leaves change, change lives.Join HICA and warm people's hearts this autumn.Care Assistant - Overton House.Looking for more than just a job? Build your career with HICA.At HICA, we believe in promoting from within.Our CEO started his career as a carer, and 5 of our current managers have progre