Trabajos Engineering en GillinghamCrear alertas

Senior Electrical Design EngineerLocation: RochesterSalary: Circa 45K – 60K + BenefitsSenior Electrical Design Engineer required by an established multidisciplinary engineering consultancy!This is a senior, project-focused role leading electrical design delivery across a range of building and development projects, with responsibility for technical direction, design quality and project deliveryEssential:Strong electrical building services design experienceExperience delivering projects from design through to constructionKnowledge of relevant electrical standards and statutory requirementsExperience reviewing and signing off electrical designsStrong client and multidisciplinary design coordination skillsAbility to lead and mentor junior engineersYou'll join a fast-growing engineering consultancy where you'll have genuine technical ownership, work across varied projects and play a key role in developing both the engineering team and electrical design standards!Apply now for FULL details!TPBN1_UKTJ

Location: Kent, London & Home CountiesSalary: £35,000–£45,000 DOEHours: 8:30am–4:30pmJob Type: Full-time, PermanentThe role will involve planned preventative maintenance, fault finding and reactive call-outs, with occasional travel to sites further afield including Brighton, Bristol and Oxford .The RoleCarry out planned preventative maintenance (PPM)Attend reactive call-outs and breakdownsFault finding and diagnosisRepairs and remedial worksComplete service reports and job sheetsTravel across Kent, London and the Home CountiesOccasional overnight stays where requiredAbout YouPrevious experience in a service and maintenance engineering roleStrong fault-finding and troubleshooting skillsComfortable working independently on customer sitesGood communication and customer service skillsRelevant technical qualifications are desirableFull UK driving licenceCall-Out & OvertimeCurrent call-out rota 1 in 4, moving towards 1 in 5£100 retaining fee for each week on call, whether called out or notOvertime availableOvertime paid at 1.5x hourly rateOvernight overtime paid at 2x hourly rateStay-away allowance paid when requiredDoor-to-door travel time is not normally paid; travel time is only considered payable where an engineer is required to return to the office before travelling homePackage£35,000–£45,000 depending on experienceMonday to Friday, 8:30am–4:30pmRegular work across Kent, London and the Home CountiesOvertime and call-out opportunitiesStable, long-term positionTPBN1_UKTJ

Experienced Electrical Engineer / Electrician who enjoys electrical theory, science and maths required for a rewarding teaching role in a disciplined, professional setting. Are you ready to inspire eager military students? \n By joining MKC Training as an Electrical Engineering Theory Trainer, you'll be a vital part of the Trade Instructors team, sharing your Electrical expertise with a new generatio... \n \n \n ZIPC1_UKTJ

Senior Geologist \n Are you interested in leading complex ground investigation projects? This could be your opportunity to excel as a Senior Geologist, playing a vital role in supporting SOCOTEC's continued success. \n As SOCOTEC grows, so do our teams. We're looking for a dedicated Senior Geologist to join our Infrastructure division and wear the SOCOTEC badge with pride. \n We are seeking a proactive, re... \n \n \n \n \n \n ZIPC1_UKTJ

We are looking for a keen and experienced service engineer, fitter, technician or mechanic to join our team. \n This is a fantastic opportunity for someone who is either an experienced powered access engineer OR maybe you are an experienced car mechanic, plant fitter or similar and want to do doing something a bit different. \n As a Workshop Service Engineer for Nationwide Platforms you will work withi... \n \n ZIPC1_UKTJ

Join Us as a Senior System Architect – Payload!\n Location: Portsmouth (Broad Oak), Filton, Dorchester - Hybrid (3 days on-site). This role involves routine travel to other southern BAE sites within the UK and occasional international travel. \n Salary: Up to £89,520, depending on experience. Who We Are\n At BAE Systems, you’re not just joining a company; you’re becoming part of a global community dedicated to pioneering progress and safeguarding what matters most. Here, your unique skills and perspectives will play a vital role in delivering cutting-edge, technology-driven defense, aerospace, and security solutions. Together, we’re shaping a safer future for everyone. \n From the depths of the ocean to the far reaches of space, your career at BAE Systems has no limits! Your Role\n As a Senior Mission System Architect (Payload), you will: \n\n • Lead the design, integration, and assurance of maritime mission system payloads, including sensors, effectors, ISR, and autonomous capabilities.\n, • Define modular, vendor-agnostic architectures that enable effective operation across complex force-level environments.\n, • Collaborate closely with customers, suppliers, and program teams to ensure solutions are interoperable, resilient, and optimized for maritime operations.\n, • Shape future payload strategies and influence architectural direction for next-generation mission capabilities.\nCore Duties\n\n, • Lead architecture for sensors, effectors, ISR, and mission payloads.\n, • Define payload integration standards, interfaces, and design principles.\n, • Ensure interoperability across platforms, mission systems, and off-board assets.\n, • Embed safety, survivability, and assurance within payload architectures.\n, • Champion open, modular, and scalable payload solutions.\n, • Influence stakeholders on payload strategy and integration approaches.\nEssential Skills\n\n, • A degree in Engineering (or a related subject).\n, • Full membership of an appropriate engineering institution and Chartered Engineer status (or actively working towards it).\n, • Extensive experience in maritime payload integration and system-of-systems architecture.\n, • Deep knowledge of defense sensors, effectors, ISR, and mission systems.\nAbout Our Team\n Within the dynamic Naval Ships Combat Systems business, you will be part of a highly skilled team of system architects dedicated to shaping the future of maritime mission systems. Collaborating on domestic and international programs, your expertise will ensure that our solutions are innovative, operationally relevant, and aligned with customer and business needs. Why Choose BAE Systems?\n Here, you’ll build a career filled with purpose and endless possibilities. With a focus on lifelong learning and meaningful work, you’ll have the opportunity to grow your career with confidence. Your contributions will be recognized, and you’ll enjoy rewards tailored to what matters most to you and your family, including support for your financial and personal well-being. \n In an environment that embraces sustainable practices and a strong sense of shared purpose, our supportive culture ensures you feel valued and proud of the difference you make. A Place Where Everyone Can Thrive\n We are committed to fostering an inclusive workplace where everyone feels valued and supported. We believe that a diversity of backgrounds, perspectives, and experiences strengthens our teams and is vital to our mission. \n Important Note: Many roles at BAE Systems are subject to security and export control restrictions. Factors such as your nationality, any previous nationalities, and your place of birth may affect your eligibility for certain roles. All applicants must achieve at least the Baseline Personnel Security Standard, with many roles requiring higher levels of National Security Vetting. \n Closing Date: 14th October 2026 \n We reserve the right to close this vacancy early if we receive sufficient applications. If you’re interested, we encourage you to submit your application as soon as possible!

Join Our Team as a Senior System Architect – Platform Interface!\n Location: Portsmouth (Broad Oak), Filton, Dorchester, hybrid – 3 days on site. This role will involve routine travel to other southern BAE sites within the UK and occasionally internationally. \n Salary: Up to £89,520, depending on experience. Who We Are\n At BAE Systems, you’re not just taking a job; you’re becoming part of a mission. As a valued member of our global network, your unique skills and perspectives will help us pioneer progress and protect what matters most. Together, we’ll deliver advanced, technology-led defence, aerospace, and security solutions that shape a safer future for everyone. \n From the depths of the ocean to the far reaches of space, your career at BAE Systems has no limits! Your Role\n As a Senior Mission System Architect (Platform Interface), you will be at the forefront of integrating platform, mission, and support systems across future naval platforms. Your expertise will define platform-agnostic architectures that enable seamless interaction between propulsion, power, control, combat, and auxiliary systems, as well as offboard monitoring. \n In this role, you will: \n\n • Lead the platform interface architecture and integration strategy.\n, • Define standards, interfaces, and system integration principles.\n, • Resolve complex cross-domain integration and interoperability challenges.\n, • Embed cyber resilience, safety, and assurance into architectural solutions.\n, • Support digital ship technologies, automation, and control systems.\n, • Influence stakeholders on platform integration strategy and delivery.\nWhat We’re Looking For\n To thrive in this role, you’ll need: \n\n • A degree in Engineering (or a related subject).\n, • Full membership of an appropriate engineering institution and be a Chartered Engineer (or actively working towards it).\n, • Extensive experience in maritime systems integration and system-of-systems architecture.\n, • Strong knowledge of platform automation, control systems, and digital engineering.\nAbout Our Team\n Within the dynamic and rapidly expanding Naval Ships Combat Systems business, you will join a highly skilled team of system architects dedicated to shaping the future of maritime mission systems. Collaborating on domestic and international programmes, your specialist expertise will ensure that our solutions are innovative, future-force-ready, and aligned with customer and business needs. Why Choose BAE Systems?\n Here, you’ll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You’ll be recognized for your contributions and enjoy rewards tailored to what matters most to you and your family, including support for your financial and personal wellbeing, as well as a balanced lifestyle. \n In an environment that embraces sustainable ways of working and a strong sense of shared purpose, our supportive culture is a place where you can truly belong and be proud of the difference you make. A Place Where Everyone Can Thrive\n We’re committed to building an inclusive workplace where everyone feels valued and supported. We believe that a diversity of backgrounds, perspectives, and experiences strengthens our teams and is vital to the work we do. \n Important Note: Many roles at BAE Systems are subject to security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can affect your eligibility for certain roles. All applicants must achieve at least the Baseline Personnel Security Standard, with many roles requiring higher levels of National Security Vetting. \n Closing Date: 14th October 2026 \n We reserve the right to close this vacancy early if we receive sufficient applications. If you’re interested, we encourage you to submit your application as early as possible!

Solutions Engineering, Technical Account Management, DevOps, Platform Engineering, or similar technical roles. Design and deliver advanced technical sessions (webinars, live builds, architecture deep dives, workshops) for platform, DevOps, security, and engineering audiences. Partner with Sales Engi

As a Customer Success Engineer, you will play a crucial role in ensuring customer satisfaction and success by:. We are searching for a highly skilled Customer Success Engineer to play a key role in optimizing our customers' utilization and return on investment in Cyera.

Answer L1 customer support requests to ensure our customers are successful with Budibase. Budibase is a technical product aimed at IT and software developers, and this role is crucial for ensuring our enterprise customers can successfully deploy and manage Budibase in their own self-managed environm

Installation Engineer Any additional information you require for this job can be found in the below text Make sure to read thoroughly, then apply. Location: Chatham, Kent (mobile role covering the UK) Salary: Competitive salary plus overtime Hours: 40 hours per week, plus overtime Delivering an outstanding customer experience every day, by creating a great place to work. As a widely respected organisation within the cooling and heating industry, we believe that our success is down to our employees. By creating a great place to work for our talented, hard working, loyal employees, our business will continue to deliver and be known for our excellent service and expertise. We are currently recruiting an experienced Air Conditioning Installation Engineer to join our Sales and Installation team, based at our Chatham branch. The Role As an Installation Engineer, you will be responsible for installing and commissioning a wide range of air conditioning units across a very wide variety of sites. Working closely with the Project Manager, you will make sure all equipment is installed to the customer's specification, to the highest possible quality and level of service. This is a mobile role. You will travel to client sites around Chatham and further afield throughout the UK, working with commercial and industrial customers in sectors such as retail, manufacturing and food production. What We're Looking For Solid working knowledge as an air conditioning installation engineer Proven experience installing and commissioning equipment for commercial and industrial clients Refrigerant handling C&G 2079 or equivalent Excellent organisation, communication and prioritisation skills Outstanding customer service, with the ability to explain technical jargon in plain language A full, valid UK driving licence Willingness to complete an advanced DBS check with barred lists check, as many of our customers are schools and hospitals What We Offer A generous basic wage plus overtime Excellent training at our bespoke, City and Guilds accredited training centre, which trained 117 engineers last year Courses covering service and maintenance, commissioning, brazing, refrigeration, water chillers and more Training that is constantly reviewed and developed to keep you up to date with current technology Varied work across a wide range of customer sites Benefits 25 days' holiday per annum, plus bank holidays, increasing with service Pension scheme Ongoing training and development opportunities Next Steps If you're ready to join our team, simply click apply and complete the short application process. For more information on what it is like to work for us, visit our Careers page at are an Equal Opportunities Employer. xrnqpay We encourage applicants from every background to apply for our vacancies. If you've got what it takes, then we want to hear from you! You may have experience in the following: Air Conditioning Installation Engineer, Air Conditioning Engineer, HVAC Installation Engineer, HVAC Engineer, Refrigeration Engineer, F-Gas Engineer, Commissioning Engineer, AC Installer, Mechanical Installation Engineer, Split System Installer, VRF Engineer REF-231230

Manage engineering projects through the full project lifecycle. Previous experience progressing from an engineering role into project management. Proven experience leading engineering projects involving electronic or real-time systems.

Are you an experienced Security Engineer with a strong background in door entry, access control, and fault-finding? We are seeking a skilled engineer to support a busy property services team on a 3-4 month contract, maintaining and upgrading security systems across residential properties and communa

Maintain the quality risk register and quality records. Quality team and support the continued improvement of quality standards across their manufacturing operations. Maintain quality documentation, standards, specifications and configuration control.

We are currently recruiting on behalf of an established and growing drainage company who are looking to add an experienced Drainage Repair Engineer to their team.This is an excellent opportunity for an experienced drainage professional with a background in drain patch repairs, drain lining and small

Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers.

Mane seeks an experienced Clean Water Process Engineer to lead design across UK water projects from concept to detailed design. You will work with multidisciplinary teams and major water clients to deliver innovative, sustainable solutions. The role supports flexible, hybrid working arrangements, with opportunities to mentor junior engineers and contribute to business development while maintaining high technical standards. #J-18808-Ljbffr

This role will be suited to a keen and enthusiastic project engineer in either electrical or mechanical engineering, looking to further their career in project management. Reporting to a Project Manager, you will work closely with technical sales, Design and Production to help you with the initiation, planning, design, execution, monitoring, controlling and closure of projects. In this role you will be assisted in your development with internal and external training (as required). The ideal candidate shall have experience in project management and/or a manufacturing or engineering environment and ideally have some experience working with some or all the following areas and systems: • Heating & ventilation systems/equipment, • Sheetmetal fabrication, • Design of equipment for Hazardous environments (Atex), • Electrical design/standards, • ISO 9001/14001, • Offshore/Renewable markets, • Draft Sight, • SolidWorks, • MRP Systems (Javelin), • Microsoft Office (Word, Excel, Outlook), • Microsoft Project You will work Monday-Thursday with week 1 Friday off and week 2 Friday working 4 hours. The working hours are flexible starting between 07:00-09:00 and finishing between 16:15-18:15 Monday-Thursday, same start time on the Friday worked but finishing between 11:00-13:00. • Planning and defining scope of Project, including meeting customer specifications and requirements, • Project timescale estimating, • Cost estimating and budget planning to meet the finical objectives of the customer project and Veotec, • Control and completion of project documentation including but not limited to; Quality Plans, Certificates of Conformity, Installation, Operation & Maintenance Instructions, • Monitoring and reporting progress to both senior management and customer, • Liaising with customers and sub-contract companies, • Checking of CAD designs / drawings prior to customer approval, • Generation of MRP parts / Bills of Materials / Works Orders / Drawing Packages for Production, • Minimum HNC qualified in a suitable engineering discipline, • An apprenticeship in an Engineering discipline, • Able to work on their own and manage their time, • Available to travel if required in UK and abroad to meet the requirements of business, • Good interpersonal skills and being able to communicate well with all departments and outside connections #J-18808-Ljbffr

Electromechanical Assembly Engineer - 1431 1431 New Hythe/Larkfield Up to £30,000 per annum (dependent on skills and experience); paid monthly. Permanent full‑time 40‑hour standard week (8‑8.30am – 4.30/5pm, Monday to Friday); overtime paid time‑and‑a‑half after 40 hours. 25 days paid holiday plus bank holidays; extra days after long service. The role of Electromechanical Assembly Engineer involves working as part of the production team to build high‑quality units for clients across the marine, vehicle and off‑grid sectors. Tasks include one‑off assemblies and production line builds, requiring a range of engineering and assembly skills. • Previous experience in electromechanical or electrical assembly., • The ability to read engineering drawings, wiring diagrams and technical documentation., • Experience using hand tools, soldering equipment and crimping tools., • Excellent attention to detail and a commitment to producing high‑quality work., • A proactive attitude with the ability to work both independently and as part of a team., • A strong focus on health and safety., • Applicants from backgrounds such as Lift Engineering, Electrical Assembly, Panel Wiring, Control Panel Build, Electrical Manufacturing or similar. #J-18808-Ljbffr

Overtime paid at time and a half £18.Overtime to be covered after hours and weekends.Monday – Friday 06:00 – 16:00 – 50 hour week.Principle Duties and Accountabilities:.Being flexible in your approach to work and undertake ad-hoc duties when your vehicle is off the road or if you are required

SolidWorks CAD Designer Medway/Mid Kent £35,000–£45,000 DOE + bens + progression We are looking for an experienced SolidWorks CAD Designer who understands how to turn a creative concept into something that can be manufactured beautifully—and correctly. Joining an established, growing manufacturer, you will work on varied, high-quality projects where precision, practicality and finish genuinely matter. This isn’t a drafting-only role. You’ll solve technical challenges, develop production-ready designs and work closely with colleagues across projects, commercial and manufacturing. • Creating detailed 3D models and manufacturing drawings using SolidWorks, • Developing designs from architectural drawings, specifications and concepts, • Producing component, assembly and production information, • Identifying and resolving design or manufacturing issues, • Managing drawing revisions across several live projectsCollaborating with internal teams and external project professionals, • Ensuring every design is accurate, practical and ready for production, • Strong commercial SolidWorks experience, • Experience producing detailed drawings for manufacture, • A practical understanding of materials, construction methods and assembly, • The ability to interpret architectural or technical design information, • Excellent accuracy, organisation and problem-solving skills, • Confidence communicating with clients, designers and manufacturing colleagues, • The ability to manage multiple projects and changing priorities Experience designing products involving timber, sheet materials or fabricated components would be particularly advantageous. Knowledge of CNC manufacturing or specialist SolidWorks software would also be welcomed. Most importantly, you’ll be someone who thinks beyond the drawing: you’ll consider how each element will be made, assembled and finished. • £35,000–£45,000, depending on experience and capability, • Technically interesting and varied project work, • A modern manufacturing environment, • Supportive, experienced design and production teams, • Permanent, stable position within an ambitious business, • Free on-site parking This is a full-time, office-based position in the Medway/Mid Kent area. Shortlisted candidates will be invited to complete a practical CAD assessment. If you’re a technically minded designer who takes pride in producing accurate, intelligent and genuinely manufacturable work, we’d love to hear from you #J-18808-Ljbffr

Project Engineer (HVAC, Sheet Metal, Renewables & Oil & Gas) Gillingham £35,000 to £40,000 + 9 Day Working Fortnight + Life Insurance + Pension + Employee Assistance Programme 9 Day working fortnight – 37 hrs per week Monday – Thursday – 8 ¾ hours per day plus ½ unpaid lunch Every other Friday 4 hours Project Engineer required for a well-established company with a great reputation who are growing. This is a great opportunity to join an expanding team within a company who can offer a varied and technically challenging role. This role would suit candidates with transferable projects experience. You will execute on time, in spec and in budget project delivery of bespoke air handling units and other sheet metal-based products. This is an exciting time to join the growing projects team. The company has expanded over the years into an impressive facility with around 100 staff. You will see your products come to life as manufacturing is also on site. • Execution of on time, in specification and in budget project delivery., • Design, validation and delivery of detailed engineered equipment solutions., • Supply chain management to ensure delivery on time, in specification & in budget., • Preparation of project documentation to achieve client approval status., • Suitable engagement and management of internal support functions to ensure the project objectives are achieved., • Provision of suitable and sufficient client liaison to represent the client project, and the company’s business needs., • Week 1 Mon – Thursday 7.00a.m. – 4.15p.m Friday 7.00a.m. – 11.00a.m. • Week 2 Mon – Thursday 7.00a.m. – 4.15p.m Friday Closed. • Project Engineer (or equivalent) experience in a similar environment., • HND/Degree (or equivalent) in an engineering/manufacturing/technical subject., • Effective organisational, communication and people management skills is extremely important., • Good understanding of risk and how to manage this effectively., • Must understand, respect, and be able to manage the appropriate balance of customer expectations and business needs., • A sound knowledge of the manufacturing environment and management of its processes is important to this role. #J-18808-Ljbffr

Mabey Hire is seeking a Design Engineer in the Strood area to join our engineering team. You will produce temporary works designs for excavation support, propping, formwork and falsework, reporting to a Design Team Leader. The role suits an engineer with a few years post-graduate experience in structures or geotechnical design, with a solid understanding of temporary works. You will collaborate across sales and operations to deliver engineering excellence. #J-18808-Ljbffr

Location: Gillingham Salary: Competitive Job Type: Permanent / Full Time Manufacturing Electronics Engineer required for a manufacturer of life saving electronic solutions products in Gillingham, Kent. Part of a global group, this company offers rewarding careers, great benefits, and plenty of opportunities to grow in a supportive, energetic workplace. The Manufacturing Electronics Engineer will work as part of an engineering team to ensure effective production across the factory floor. Working to improve processes and develop lean practices. Taking responsibility for new projects and product introductions within production. • Working with other Engineers and Technicians, and reporting to the Engineering Team, • Assist with NPIs., • Implement new processes on the factory floor., • Support technicians with fault diagnosis and repair of production equipment., • Carry out updates to controlled drawings and documentation., • Introduce LEAN improvements within production to improve productivity and reduce waste., • Liaise with external contactors to coordinate planned maintenance or repairs., • Perform calibration tasks on production equipment and maintain accurate records., • Training production staff on new or updated processes or equipment., • Assist with shopfloor layout change activities and new equipment installations., • Create programmes for production equipment., • Design and instal jigs and fixtures., • Research and install new production equipment., • Perform takt time analysis of cells to set and improve KPIs across production., • Design and install new production cells., • Develop automation solutions., • Run pre-production activities., • Review and approve concessions., • Degree level qualification in Electrical / Electronics Engineering, • Experience within engineering / production environment., • Experience in PCBA manufacture, design and testing., • Automation systems., • Solid foundation in electronics down to the component level., • Desirable: Knowledge of lean processes and process development, • CAD software (SolidWorks), • Test software (LabView), • Competitive salary with Benefits, • Bonus, • Pension, • Life Assurance, • Eye care, • Employee assistance programme, • Cycle 2 work scheme. This is an excellent opportunity to become part of the key engineering team within a developing business with its culture shaped by core values of Integrity, Passion, Challenge and Teamwork. #J-18808-Ljbffr

Artemis Clarke Ltd in Gillingham is looking for a Manufacturing Electronics Engineer to enhance production processes at their facility. The role involves collaboration with engineers to implement lean practices, oversee new projects, and improve productivity across the factory. The ideal candidate s

SOCOTEC’s Infrastructure team delivers essential technical services that ensure the safety, quality and compliance of major construction and civil engineering projects across the UK. We provide independent construction materials testing to verify strength, durability and performance of key materials; foundations and pile testing to confirm ground stability; specialist structures and pavements assessment and analysis; and integrated geotechnical and structural monitoring that delivers real time data throughout project lifecycles. Our experts use industry leading methods and advanced technology to support infrastructure projects from initial site investigation through construction and long term performance, helping clients manage risk, meet regulatory standards and build safer, more resilient assets. What's in it for you? Your expertise deserves recognition. Alongside a competitive salary, we offer a comprehensive benefits package including 25 days holiday (with the option to buy more), an electric car scheme (where applicable), employee recognition programmes, family-friendly support, exclusive retail discounts, employee assistance programmes, and an enhanced company pension. SOCOTEC UK & Ireland are proud to be Disability Confident accredited. Senior Geologist Are you interested in leading complex ground investigation projects? This could be your opportunity to excel as a Senior Geologist, playing a vital role in supporting SOCOTEC’s continued success. As SOCOTEC grows, so do our teams. We’re looking for a dedicated Senior Geologist to join our Infrastructure division and wear the SOCOTEC badge with pride. We are seeking a proactive, reliable, and flexible Senior Geologist to join our Coventry-based team. In this role, you’ll need the confidence to work independently, alongside the ability to collaborate effectively as part of a team. A background in geotechnical disciplines, along with extensive ground investigation experience, is essential to thrive in this position. The tasks you will undertake will include (but are not limited to): • Day to day responsibility for planning, supervision and programming of Ground Investigation projects at locations throughout the United Kingdom, • Prepare Health & Safety documentation prior to and during the site works phase, as well as assisting with the managing the Health & Safety of operatives and promoting a safe working environment, • Liaise with clients / Engineers / main contractors throughout the site works phase, • Compile monthly financial project accounts and assist the GI Projects Manager in maintaining the financial performance of projects To be a successful Principal Geologist, you should be able to demonstrate: • Qualified to degree level in a geotechnical discipline, • Full UK driving licence, • Have a minimum level of fitness required to undertake all site based tasks listed above on a variety of sites including active construction sites and linear projects for roads and railways, • 5 - 10 years relevant site and industry experience Why SOCOTEC? Join a thriving community of over 2,000 industry professionals who are passionate about making a real difference. At SOCOTEC UK, we're not just delivering services - we're shaping the future of testing, inspection, and certification across the nation. What sets us apart? Our people. We've built our reputation on attracting exceptional talent like you and empowering them to deliver excellence at every turn. Our comprehensive range of TIC services means you'll have the opportunity to work on diverse, challenging projects that truly matter. In this role, you won't just be another employee - you'll be a key player in our continued success story. Your expertise will directly contribute to our mission of building a safer, more sustainable world, while you grow your career alongside some of the industry's finest professionals. Build a traditional career path or explore opportunities across multiple disciplines - all within SOCOTEC. Your choice, your direction. Work Your Way Local, national, or global projects. Office-based, remote, or hybrid. We offer the flexibility that empowers you to perform at your best. Committed to Your Growth From day one, you'll have access to comprehensive training, mentorship, and development programs. We support every step of your professional journey. #YouGrowWeGrow Building a safer and more sustainable world is the core mission we set out to achieve at SOCOTEC, it is at the heart of everything that we do. We are committed to acting as a key player in society, investing in innovative solutions to ensure social and environmental concerns are at the forefront of all of our business operations. #J-18808-Ljbffr

Design Engineer We are a leading temporary works specialist and at the forefront of our industry for over 60 years, with a reputation built on engineering and service excellence. This enables us to deliver the right temporary works solution for our customers, whatever the scale or complexity of the project. Our customers include civil engineering and construction contractors, asset owners, and consulting engineering firms through to small builders. Due to continued growth, we are currently looking for a design engineer to join our engineering team. Reporting to a Design Team Leader, you will be responsible for producing temporary works designs for excavation support, propping, formwork and falsework. The role would suit an engineer with a few years post graduate experience with demonstratable technical experience in structures or geotechnical design and a sound understanding of temporary works. At Mabey Hire, the floor is yours to fulfil your potential and take us forward. • A competitive basic salary, • Company bonus, • Great health and well-being packages, • A fantastic pension scheme, • Experience of designing temporary works for groundworks and/or building refurbishment propping (e.g geotechnical design of sheet pile cofferdams and/or propping and needling), • Prepare temporary works designs for groundworks and eventually other product schemes., • Checking designs and drawing in accordance with BS5975:2019, • Attend client meetings and carry out site visits., • Review design briefs provided by the sales team through Launchpad and provide feedback if more information is required., • Managing your own workload § Contribute to continuous improvement projects as agreed by the Engineering Director., • A HND or degree in civil/structural engineering, • At least 3 years experience designing temporary works, • The ability to work in a fast paced and changing environment, • Experience of designing Formwork & Falsework, • Good understanding of CDM 2015, • Experience utilising AutoCAD 2D and/or REVIT, • Experience of designing Formwork, • Experience of checking Groundworks, • Experience working for a supplier or in a commercial environment, • Some experience working on site As our next Design Engineer, you’ll collaborate with sales and operations to support our customers through engineering excellence. #J-18808-Ljbffr

RCC Connect is seeking a skilled Fire Service Engineer to service and maintain fire alarm systems across London and Kent. You will diagnose faults, carry out routine servicing, and respond to call-outs as part of a rota, while upholding safety standards and quality of service. Join a leading UK fire and security provider offering ongoing training, a company car, travel time, and a clear path for progression within a respected team. #J-18808-Ljbffr

Kier is seeking a Design Manager for their Brighton contract team based in Falmer, offering a hybrid work model with some remote options. The role involves leading engineering design delivery, collaborating with multi-disciplinary teams, and ensuring sustainable design practices. Ideal candidates will be Chartered Engineers with extensive design and project management experience, strong communication skills, and a commitment to inclusivity and environmental improvements. #J-18808-Ljbffr

ALTEN is seeking a Mechanical Engineer - Hydraulics to support aerospace hydraulic systems, working within a multidisciplinary engineering team. Based in Kent (Gillingham), the role mixes on-site work with hybrid arrangements and BPSS clearance requirements. You'll develop, analyze and validate hydraulic and electro-hydraulic systems, interpret test data, and contribute to investigations while collaborating across design, systems and test teams throughout the product lifecycle. #J-18808-Ljbffr

Are you an experienced Clean Water Process Engineer looking to play a key role in delivering critical water infrastructure projects across the UK? We are seeking a technically strong engineer to join a growing engineering team, supporting the delivery of clean water treatment projects from concept and feasibility through to detailed design. This is an excellent opportunity to take ownership of process engineering activities, work closely with major UK water companies and contribute to the delivery of innovative, sustainable solutions within the water sector. As a senior member of the engineering team, you will lead clean water process design activities across multiple projects, providing technical expertise throughout the project lifecycle. Working within a multidisciplinary environment, you'll collaborate with engineers, project managers and clients to ensure designs are delivered safely, efficiently and to the highest technical standards. You will also act as a key point of contact for clients, presenting technical solutions, supporting project delivery and mentoring junior engineers where required. • Lead the delivery of clean water process design from concept through to detailed design., • Produce and review process calculations, PFDs, P&IDs and technical specifications., • Provide technical leadership and guidance to process engineers and multidisciplinary teams., • Build and maintain strong client relationships, acting as the technical lead on process engineering matters., • Present engineering solutions and recommendations to clients and project stakeholders., • Ensure projects are delivered in line with programme milestones, budgets and industry standards., • Participate in design reviews, technical workshops and value engineering activities., • Support business development activities, bids and proposals where required. To be successful in this role, you will have: • A minimum of 10 years' experience in clean water process engineering., • Able to regularly travel to client offices (notably South East Water in Snodland, Kent)., • Proven experience delivering front-end and detailed design for UK water industry projects., • A strong understanding of current UK clean water treatment processes, legislation and design standards., • Experience leading process engineering activities within multidisciplinary project teams., • Excellent communication and stakeholder management skills., • The ability to manage multiple projects while maintaining high technical standards. Ideally, you will also hold Chartered Engineer status (or be working towards it) through IChemE, IET, CIWEM or an equivalent professional institution. • Opportunity to work on nationally significant water infrastructure projects., • Long-term contract opportunity with an established engineering organisation., • Flexible and hybrid working arrangements., • Collaborative multidisciplinary engineering environment., • Technically challenging and varied projects with genuine opportunities to influence design solutions., • Opportunity to provide technical leadership and mentor other engineers. If you're passionate about delivering innovative clean water solutions and are looking for your next engineering challenge, we'd love to hear from you. #J-18808-Ljbffr

Engineering Project Manager £52.46 – £75.70 per hour One of our Aerospace clients are currently recruiting for their Electronic Systems Engineering leadership team based in Rochester. They require 2 Specialist Engineering Project Manager's to support the delivery of electronic real time systems to defence and Aerospace customers. Based in Rochester these roles will require a minimum of 3 days per week onsite, plus 2 days working remotely. They are being offered on a 12-month contract basis with the opportunity of further extension or permanent conversion. The roles have been deemed inside IR35 and can pay a rate of £52.46 per hour PAYE or £75.70 per hour Umbrella. Responsibilities Oversee and manage Engineering projects through the full lifecycle. Give technical direction on electronic real time systems. Work closely with global customers and supply chain, operating as cross-functional teams. Drive continuous improvement by implementing innovative Engineering practices, solutions and technologies Serve as the primary Engineering point of contact for stakeholders to your project Guide and support team members, fostering a collaborative and high-performance work environment Requirements Project Management experience in the Aerospace industry At least 10 years' experience in engineering Proven experience in leading Engineering projects for electronic real time systems Bachelor's degree (or equivalent) in Engineering or a related field Effective leadership, communication and problem-solving skills HNC required in an engineering discipline Recognising the RESTRICTED nature of the work, suitable candidates will need to be SC cleared or eligible for this level of clearance before starting on site TPBN1_UKTJ

Location: Rainham - London Salary: £43,481.73 per annum plus company vehicle & fuel card Contract Type: Permanent, Full-time Hours: Monday to Friday, 42.5hrs per week Annual salary: up to £43,481.73 We’re looking for a skilled and safety-conscious Gas Engineer to join our team in Rainham delivering high-quality gas servicing, repairs, and installations across our clients’ housing stock. Your role will be vital in ensuring that all gas appliances and systems are safe, compliant, and fit for continued use. You’ll carry out a range of domestic gas works including boiler diagnostics, repairs, servicing, and installations. Accuracy, attention to detail, and a commitment to safety are essential, as your work directly impacts the wellbeing of residents, staff, and the wider public. You’ll be expected to work independently and as part of a team, maintaining high standards of customer service and compliance at all times. • Carry out servicing, repairs, and installations of domestic gas appliances including boilers, cookers, and fires, • Diagnose faults and complete remedial works efficiently and safely, • Perform landlord gas safety inspections and issue certificates (CP12s), • Ensure all work complies with current gas regulations and internal procedures, • Respond to emergency callouts and urgent repairs when required, • Record all work completed using handheld devices or job management systems, • Liaise with tenants, housing officers, and internal teams to ensure clear communication, • Maintain van stock levels and order materials as needed, • Identify and report any safeguarding concerns or property hazards, • Work collaboratively with other trades to complete multi-skill jobs, • Participate in toolbox talks, training sessions, and safety briefings, • Ensure PPE is worn and health & safety procedures are always followed, • Support apprentices or junior engineers when required, • Qualified to City & Guilds or NVQ Level 3 in Gas Installation and Maintenance, • Hold valid ACS certification (e.g. CCN1, CENWAT, CKR1, HTR1), • Experience in domestic boiler servicing, fault diagnosis, and installation, • Good understanding of electrical safe isolation and basic wiring principles, • Knowledge of current gas safety legislation and compliance standards, • Experience working in social housing or local authority environments (preferred), • Excellent communication skills with a customer-focused approach, • Ability to work independently and as part of a team, • Comfortable using handheld devices or digital job management systems, • Strong attention to detail and commitment to safe working practices, • Full UK driving licence, • 25 days annual leave plus bank holidays, • Annual Mears Fun Day - Our annual Fun Day is organised as a massive thank you from the Executive team for all the hard work!, • Volunteering Leave - Mears supports employees to undertake paid volunteering in the community, in support of our social value commitment., • Staff perks with Mears Rewards - discounts of up to 10% weekly groceries, holidays, eye test vouchers, Share save scheme, plus much more, • Family friendly policies, • Company Vehicle and Fuel Card, • Access to EAP Counselling sessions All our roles require candidates to have the entitlement to work within the UK, Mears does not currently offer visa sponsorship. To drive a Mears vehicle, you must be aged over 21 have held your licence over 3 months and have less than 9 points. Candidates should be aware that all our roles are subject to relevant Background, Identity & Security checks before commencement of employment. At Mears Group, we are committed to fostering a diverse and inclusive environment where everyone can thrive, we are a Disability Confident employer, valuing individuality and ensuring equal opportunities for all. We proudly support the Armed Forces Covenant and are honoured to have achieved the Gold Award in the Defence Employer Recognition Scheme (ERS) to coincide with this, we hold an Endorser Award for the Career Transition Partnership, recognising our commitment to veterans transitioning into civilian careers. In our continued effort to promote social mobility, we invite applicants to voluntarily share their background information during the application stages to help us better understand the diverse experiences of our candidates. This is to ensure we are committed to improving social mobility. We use the Social Mobility Index to assess and enhance opportunities for individuals from diverse backgrounds. These questions are optional and will not impact your ability to apply. #J-18808-Ljbffr

ALTEN is a global engineering and technology consultancy operating across over 35 countries worldwide. We partner with industry leaders across sectors including Aeronautics, Aerospace, Defence, Naval, Automotive, Energy, Rail, IT and many more to deliver innovative engineering solutions that drive technological advancement & support sustainable transformation. Our teams of passionate and agile engineers work on cutting-edge projects that shape the future of technology and sustainability. At ALTEN, we empower talented engineers to innovate, solve complex challenges, and deliver impactful solutions that build tomorrow’s world—today. Join us and start building tomorrow’s world today! As a Mechanical Engineer - Hydraulics, you will join our Bristol team to support our activities within the aerospace engineering sector. You will support the development, analysis, and validation of hydraulic and electro-hydraulic systems used in aerospace applications. Working within a multidisciplinary engineering team, you will be responsible for analysing system performance, supporting testing activities, and investigating technical issues related to hydraulic components and assemblies. • Location: Kent (Gillingham), • On Site: Hybrid (3 days per week on site), • Clearance: BPSS required, • Experience Level: Junior to Mid - Level (2-5 years of experience) Key Responsibilities: • Support the development and analysis of hydraulic and electro-hydraulic systems, • Evaluate the performance of solenoid valves and hydraulic components, • Process, analyse, and interpret test data to support engineering investigations, • Develop engineering calculations and analytical models using MATLAB and Mathcad, • Support laboratory and system-level testing activities, • Assist with troubleshooting and root cause analysis of hydraulic system issues, • Produce technical reports and present findings to engineering stakeholders, • Collaborate with design, systems, and test teams throughout the product development lifecycle Required Skills: • Strong understanding of solenoid valves and electro-hydraulic components, • Mechanical engineering background with knowledge of hydraulic systems, • Experience in engineering data processing and analysis, • Proficiency in MATLAB and Mathcad, • Ability to support testing, troubleshooting, and performance evaluation activities, • Strong analytical and problem-solving skills, • Good communication and technical reporting skills Required Qualifications: • A Bachelor’s or Master’s degree in Engineering, orequivalentmilitary experience., • Experience working with hydraulic systems in an engineering environment, • Understanding of engineering analysis and product validation methodologies, • Experience within aerospace, defence, or other highly regulated industries, • Knowledge of hydraulic actuation systems and control technologies, • Experience interpreting test data and generating engineering recommendations, • Familiarity with requirements verification and validation processes, • Exposure to system modelling and simulation techniques We bring together entrepreneurial, tech-driven people to deliver innovative solutions for leading companies. At ALTEN, you’ll work on exciting projects, supported by ongoing learning, mentoring, and clear career development tailored to your goals. Join a passionate team and help build tomorrow, today. • A personalised career path and a rewarding management style, • A huge diversity of engineering projects and industries, • Private MedicalInsurance, • Employee assistance programme, • Life insurance & Pension Scheme, • Social atmosphere, regular gatherings &team buildings, • Flexible way of working (role dependent) We are proud to support the Armed Forces Covenant & actively encourage applications from members of the Armed Forces community, including veterans, reservists, service leavers, and military spouses/partners. We recognise the value of military skills and experience and are committed to ensuring that no applicant is unfairly disadvantaged during our recruitment and selection processes. ALTEN is committed to fostering a diverse and inclusive workplace and values the strength that comes from a global mix of backgrounds and perspectives. We welcome applications from all suitably qualified candidates, regardless of background or protected characteristics under the Equality Act 2010. If you require any reasonable adjustments during the recruitment process, please let us know. This role may require you to have or be willing to go through Security Clearance. As part of the onboarding process candidates will be asked to complete a Baseline Personnel Security Standard; details of the evidence required to apply may be found on the government website Gov.UK. If you are unable to meet this and any associated criteria, then your employment may be delayed, or rejected . Details of this will be discussed with you at interview. #J-18808-Ljbffr

Our client is seeking a skilled Electromechanical Assembly Engineer - permanent full-time. Salary: Up to £30,000 pa (the salary will be dependent on skills and experience) paid monthly. Location: Near Maidstone, Kent. Hours: 40 hour standard week – 8/8.30am – 4.30/5pm, Monday to Friday. Overtime: When required, paid at time and a half after 40 hours. Benefits include: 25 days paid holiday per annum + Bank Holidays. Extra days after long service. The role of Electromechanical Assembly Engineer is working as part of the production team building high quality units for clients across the marine, vehicle and off grid sectors. This will include work from one‑off assemblies to production line builds which will require a range of skills from the candidates who apply. • Previous experience in electromechanical or electrical assembly., • The ability to read engineering drawings, wiring diagrams and technical documentation., • Experience using hand tools, soldering equipment and crimping tools., • Excellent attention to detail and a commitment to producing high-quality work., • A proactive attitude with the ability to work both independently and as part of a team., • A strong focus on health and safety., • Applicants from backgrounds such as Lift Engineering, Electrical Assembly, Panel Wiring, Control Panel Build, Electrical Manufacturing or similar. #J-18808-Ljbffr

OJ StratTech group is seeking a talented Full Stack Developer in Chatham, UK. You will be responsible for designing, developing, and maintaining robust and scalable applications. Key responsibilities include collaborating with teams to deliver high-quality solutions and ensuring application performance. Required skills include strong knowledge of HTML, CSS, and modern frontend tools, along with experience in databases and cloud platforms. A flexible, remote-friendly work environment, along with professional development opportunities, is offered. #J-18808-Ljbffr

Platform Recruitment Limited is hiring a Senior Electronics Engineer based in Gillingham, Kent, Kent, South East, UK. This is a Full time opportunity (£65,000). We're looking for an experienced Senior Electronics Engineer to join a growing R&D team, helping to develop and enhance a range of innovative audio products from concept through to production. This is an opportunity to work across the full development lifecycle within a highly technical, collaborative environment. You’ll play a key role in the dev... #J-18808-Ljbffr

We are a leading temporary works specialist and at the forefront of our industry for over 60 years, with a reputation built on engineering and service excellence. This enables us to deliver the right temporary works solution for our customers, whatever the scale or complexity of the project. Our customers include civil engineering and construction contractors, asset owners, and consulting engineering firms through to small builders. Due to continued growth, we are currently looking for a design engineer to join our engineering team. Reporting to a Design Team Leader, you will be responsible for producing temporary works designs for excavation support, propping, formwork and falsework. The role would suit an engineer with a few years post graduate experience with demonstratable technical experience in structures or geotechnical design and a sound understanding of temporary works. At Mabey Hire, the floor is yours to fulfil your potential and take us forward. • A competitive basic salary, • Company bonus, • Great health and well-being packages, • A fantastic pension scheme, • Experience of designing temporary works for groundworks and/or building refurbishment propping (e.g geotechnical design of sheet pile cofferdams and/or propping and needling), • Prepare temporary works designs for groundworks and eventually other product schemes., • Checking designs and drawing in accordance with BS5975:2019, • Attend client meetings and carry out site visits., • Review design briefs provided by the sales team through Launchpad and provide feedback if more information is required., • Managing your own workload § Contribute to continuous improvement projects as agreed by the Engineering Director., • A HND or degree in civil/structural engineering, • At least 3 years experience designing temporary works, • The ability to work in a fast paced and changing environment, • Experience of designing Formwork & Falsework, • Good understanding of CDM 2015, • Experience utilising AutoCAD 2D and/or REVIT, • Experience of designing Formwork, • Experience of checking Groundworks, • Experience working for a supplier or in a commercial environment, • Some experience working on site As our next Design Engineer, you’ll collaborate with sales and operations to support our customers through engineering excellence. #J-18808-Ljbffr

TRAINEE Mechanical Engineering Tutor | £37500k | Rochester Salary: £37,500 per year Starting Salary Job Type: Full-time, Permanent | Trainee Position (Training Provided) Career Change Opportunity: Fund Your Future, Share Your Skills Are you a time-served Mechanical Engineer ready to 'down tools' and transition your expertise into a rewarding training career? This is a highly sought-after Trainee Tutor position-we require your engineering knowledge; we will provide ALL the training and qualifications needed to succeed as an instructor. HIGH STARTING SALARY: Begin earning £37500 immediately. FULLY FUNDED TRAINING: All teaching and assessor qualifications will be provided and funded by the employer Bonus scheme - £1k per annum Excellent Company Benefits Package and genuine career development opportunities Flexible and friendly working environment Pension contribution. Flexi time Candidates will be subject to an enhanced DBS check Coaching the Next Generation You will be involved in teaching, coaching, and mentoring young learners undertaking crucial Level 3 and Level 4 Mechanical Engineering qualifications Delivery: Deliver and coordinate the successful completion of all aspects of mechanical engineering qualifications. Mentorship: Provide hands-on coaching and technical guidance to learners in the training centre. Focus: Training apprentices in line with relevant awarding body standards. Environment: Work in a rewarding, self-motivated team environment that values a 'hands-on approach.' Essential Requirements (Your Experience is Your Qualification) We are looking for proven occupational experience in the field of Mechanical Engineering: Occupational Experience: Minimum 5 years' relevant occupational experience within Mechanical Engineering Technical Qualification: Mandatory Level 3 or 4 Engineering related qualification . Soft Skills: Good communication, presentation skills, and the ability to adapt to a dynamic, rewarding environment. Compliance: This position is subject to Enhanced DBS clearance . Ready to launch a new, stable, and highly rewarding career? Apply today to transition your engineering skills! TPBN1_UKTJ

A reputable engineering company in Gillingham is looking for a Project Engineer specialized in HVAC, sheet metal, and renewables. The role involves managing project delivery, designing equipment solutions, and liaising with clients. Candidates should have a relevant engineering qualification and experience in a similar environment. The position offers a competitive salary of £35,000 to £40,000 plus additional benefits including a 9-day working fortnight and life insurance. This is an exciting opportunity to join a growing team. #J-18808-Ljbffr

React Recruitment Ltd is seeking an Electromechanical Assembly Engineer to join the production team building high‑quality units for clients across the marine, vehicle and off‑grid sectors.

Salary: £35,000–£50,000 (DOE) + Travel Time + Overtime + Company Car Benefits: 25 Days Holiday + Bank Holidays, Ongoing Training & Development, Progression Opportunities Employment Type: Full-time, Permanent We are one of the largest independent Fire & Security companies in the UK, providing the complete A–Z of fire and security solutions. With a strong reputation, national presence, and continual investment in our people, we offer excellent long-term career prospects, ongoing training, and clear pathways for progression. We are seeking an experienced Fire Service Engineer to join our growing team in the South East, covering London and Kent. You will be responsible for the service, maintenance, and repair of fire alarm systems across a diverse portfolio of clients. • Carry out routine service, maintenance, and PPMs on fire alarm systems, • Diagnose and repair faults efficiently, • Respond to emergency call-outs (on a rota), • Ensure all work complies with current standards and company procedures, • Provide excellent customer service and maintain strong client relationships, • Complete all necessary documentation and reporting, • Proven experience servicing and maintaining fire alarm systems, • Competency with some of the following systems: Kentec, Morley, Advanced, Notifier, Gent, Edwards, Siemens • Commissioning experience on at least one system: Kentec, Advanced, Siemens, Gent, Morley, Edwards • Full UK driving licence, • Strong fault-finding and diagnostic skills, • Ability to work independently and as part of a team, • Excellent communication and customer-facing skills, • £35,000–£50,000 salary, negotiable depending on experience, • Paid travel time, • Overtime available, • Company car (with personal use options), • 25 days holiday + bank holidays, • Continuous training and development, • Opportunities to progress within one of the UK’s most established independent Fire & Security providers If you are a skilled Fire Service Engineer looking to join a respected and growing organisation offering stability, development, and excellent earning potential, we’d love to hear from you. #J-18808-Ljbffr

We are currently looking for a HGV Class 2 Drainage Engineer to join our growing team based in Gillingham, Kent. Operating and assisting with drainage cleaning, maintenance and emergency drainage works. This is an excellent opportunity to work within a professional two-man crew operating a range of

Mabey Hire in the United Kingdom is seeking a Design Engineer to join our engineering team. Reporting to the Design Team Leader, you will produce temporary works designs for excavation support, propping, formwork and falsework, with a focus on safety and compliance. The role suits an engineer with a few years post graduate experience in structures or geotechnical design, capable of working in a fast-paced environment and collaborating with sales and site teams to deliver engineered solutions. #J-18808-Ljbffr

Our Engineering team at Rubix plays a vital role in solving complex challenges and delivering practical, innovative solutions that keep our customers moving. We bring together talented engineers from a wide range of backgrounds, experiences, and disciplines — all united by a shared commitment to quality, safety, and continuous improvement. Whether working onsite or in our specialist facilities, we foster a collaborative, inclusive environment where every voice is valued, and diverse thinking drives better outcomes. By combining technical expertise with a deep understanding of our customers' needs, we engineer solutions that make a real difference to our clients. About the Role: Adhere to Company, Site & Client, H&S policies and procedures at all times, ensuring the safety of yourself and your colleagues. Routinely promote a safe working culture. Work in an efficient and effective manner, maintain an organised and controlled workspace. Working within the agreed Method Statements and Work Instructions: Conduct root cause and fault-finding analysis on electro-mechanical equipment and systems. Document findings, causes and corrective actions, recommending repairs, replacement parts and spares requirements into customer reports. Where appropriate and feasible, undertake on-site maintenance, repairs and refurbishment. Undertake the dismantling and removal of rotating equipment and other mechanical equipment for removal from site as required. Fully dismantle, clean, prepare, repair, refurbish, rebuild and test completed equipment as required. Undertake the re-installation of all types of rotating equipment and other mechanical equipment following workshop repair, and conduct field tests and commissioning as per agreed contract. Undertake routine service and maintenance work on client's sites. Attend breakdown work on clients' sites as required. Work in the Company's workshops as business needs dictate. Key Skills, Experience & Requirements: Mechanical apprenticeship, time-served and indentured to ONC & HNC, NVQ, or equivalent qualifications. A minimum of 3 years' experience in a similar, field based, role and working environment. Flexible approach to working times in line with company's reactive nature. Knowledge of basic H&S requirements on a production site. Full clean UK driving licence. Multi skilled (electro-mechanical capability) an advantage. TPBN1_UKTJ

A genuinely exciting Service Engineer opportunity has arisen with this leading provider or door entry, access control and warden call systems. They are looking for an experienced Door Entry/Access Control Engineer to cover the Kent area. LOCATION: Candidates will live in the Kent or Sussex area and cover East and West Sussex and the surrounding area as a territory. Working 8.30am to 5.00pm Monday to Friday. You will be on the call-out rota (once through probation) 1 week out of every 5 (and paid additionally for it). SALARY: The basic salary is between £35,000 to £47,000 (depending on experience). OTE is approximately another £6000 on top, as overtime is earned daily for travel and then again for call out. You will also receive 20 days annual leave and company pension. You will also receive a company van. As Service Engineer, you will be responding to 'service calls' in and around the Kent area. Fault finding and repairing door entry systems, access control systems and warden call systems. Additional training will be provided if needed. Successful candidates will have a minimum of 2 years' Service Engineer experience with door entry, access control or warden call experience and have a full driving license. If this sounds like it could be of interest, please apply ASAP. Contact: In the first instance please send your CV to Kelly Duke ELIGIBILITY All vacancies are based in the UK. It is unlawful to employ a person who does not have permission to live and work in the UK and we will therefore only consider applications from candidates who are eligible to work in the EU. Scarlet Selection are UK-based recruitment specialists, placing experienced professionals across all industry sectors. The services Scarlet Selection provides are those of an employment agency. TPBN1_UKTJ

South East Water is seeking a Project Engineer to join the Investment Delivery Directorate in Snodland, Kent. You will support a Project Manager, own technical aspects from conception to completion, including a PLC replacement project, and help plan, schedule and manage tasks to ensure safety and top-quality outcomes. You will work in a flexible hybrid model (office/home) with travel to project sites across the South East as required for scoping, reviews and site activities, contributing to CPD #J-18808-Ljbffr

We are seeking a detail-oriented and driven individual to take on the role of a Mechanical Project Engineer, focusing on pre-mobilisation, design coordination, and project delivery. • Lead design surveys and provide detailed design survey information to our design team., • Conduct thorough reviews of tenders, focusing on design, programme, and risks., • Lead design Q&A sessions alongside Clients and the Project Delivery Team., • Submit and track RFIs to resolve design any project-related queries., • Create procurement documents and complete technical submittals., • Develop project programmes and highlight key risks., • Undertake Labour and Material measures., • Work closely with the Procurement Team to ensure all necessary materials, plant, and equipment are ordered before project mobilisation., • Raise ITTs, review sub-contractor quotes, and collaborate with the Commercial Team to award contracts., • Assist design-related communication., • Support the Project Manager and Contracts Manager in maintaining high standards of quality assurance throughout Projects., • Take ownership of all project-specific Contractor Design Portion (CDP) elements., • Draft detailed site instructions for management review, covering works required, location, programme and cost impacts, and client-led change events., • Ensure all submitted commissioning documents adhere to design and specification requirements., • Draft and issue comprehensive handover documents, including O&M manuals., • HNC/HND or equivalent in Mechanical or Electrical., • Proven time management organisational skills, with the ability to work on multiple projects simultaneously., • Excellent attention to detail and high levels of accuracy., • Excellent knowledge of British Standards and both Mechanical and/or Electrical disciplines., • Self-starter and ability to operate and excellent communication at all levels (from Site Level to Senior Management)., • Strong understanding of health and safety regulations and best practices in the relevant field of operation., • Ability to conduct thorough investigations and prepare detailed reports., • Experience in a similar position., • Ability to liaise and converse with clients in a professional manner., • Full UK driver’s license. #J-18808-Ljbffr