It professional jobs in Derby - Page 3Create job alerts

M&E Manager (Mechanical and Electrical Manager) Derby c£50k - £62k neg dep exp + benefits Our established and highly successful niche sector client offers a range of highest quality services that encompass Project Management and Implementation, Consultancy and Software Development to blue chip clients worldwide, and as a result of continued success and an ongoing planned programme of strategic growth, they are now seeking to recruit an experienced and professional Mechanical and Electrical Manager (M&E Manager) to oversee the supply chain operation. To be considered for this Derby based varied and challenging Mechanical and Electrical Manager (M&E Manager) role, you will be a well organised team player who demonstrates exceptional attention to detail and a high level of electrical infrastructure and electrical principles knowledge, holding a relevant qualification (HND or above) in electrical engineering or equivalent, whilst also having the appropriate skills and experience to undertake the following (including but not limited to) duties: Tender Stages: Co-ordinating and attending site surveys at both tender and project delivery stages. Assisting in evaluating M&E supplier proposals and in generating proposals for M&E requirementsProject Delivery for M&E Works: Producing technical and delivery requirements for supplier quotations and conducting evaluations. Attending design meetings (along with design sub-contractor as required). Providing support to the Site Supervisor in site progress meetings. Assisting the Project Manager in the planning, execution and completion of the M&E sub-contract works, and managing supplier progress and performance, ensuring alignment with project plans. Managing the production of designs (by supplier) such as equipment locations, installation designs, equipment designs etc. Managing M&E FAT's and reviewing all relevant documentation. Managing the co-ordination of designers and installers (which may be different sub-contractors) Reviewing site test documentation and RAMS. Managing site supervisors for M&E works and all aspects of installation handover, as well as all associated members of the team including Commissioning Engineers, Electrical Design Engineers and CAD Engineers. It is envisaged that the successful Mechanical and Electrical Manager (M&E Manager) candidate will demonstrate at least 4 years previous experience in a similar role, be SSTS and CSCS qualified, and familiar with electrical infrastructure and electrical principles normally associated with projects in transportation, power or comparable sizable projects from other sectors. With a good level of IT proficiency (Excel and Word mandatory) you will be comfortable working under pressure and to tight deadlines with excellent attention to detail and the flexibility and adaptability to manage a range of different tasks and to work extra hours as required. Contact the Electrical Team at Premier Technical Recruitment on (phone number removed) or email your cv in confidence to for further details

Registered Children’s Home Manager – Brand New EBD Service Location: Derby Salary: £60,000 per annum Contract: Full-time, Permanent We’re supporting an established care provider who is expanding into children’s residential services and is now seeking a Registered Children’s Home Manager to lead their first children’s home in Derby. This is a brand-new 2-bed EBD home, with the property secured, planning approved, and an external consultancy already in place to support the registration and setup process. The provider brings strong operational experience from adult care and is committed to building a high-quality, compliant children’s service from day one. About the Home New 2-bed EBD children’s home Property secured with planning in place External consultancy supporting registration and setup Opportunity to shape the service, culture, and care model from the outset This role offers genuine autonomy alongside structured professional support, making it an excellent opportunity for a Registered Manager who enjoys building services and setting standards. The Role As Registered Manager, you will: Lead the Ofsted registration process and prepare the home for opening Develop and embed policies, procedures, and quality standards Recruit, train, and lead your own staff team Ensure full compliance with the Children’s Homes Regulations 2015 Embed safeguarding and trauma-informed practice throughout the service Build strong relationships with external professionals and commissioners Create a safe, nurturing environment where young people with EBD can thrive The Ideal Candidate We’re keen to speak with candidates who have: Previous experience as a Registered Manager within children’s residential care Strong knowledge of Ofsted regulations and registration processes Experience supporting children with Emotional and Behavioural Difficulties (EBD) Level 5 Diploma in Leadership & Management for Residential Childcare (or working towards) The confidence and drive to lead a service from the ground up What’s on Offer Salary of £60,000 per annum Opportunity to lead a brand-new service from inception External consultancy support throughout registration Autonomy to shape the home’s ethos, structure, and standards Backing from an experienced care provider entering children’s services

Senior Mechanical Engineer Certain Advantage is hiring for a Senior Mechanical Engineer based in the Derby area. This role is on a permanent basis and is site-based. The Company We’re working with an engineering company specialising in managing complex infrastructure projects, with a strong focus on nuclear energy, renewable energy, and digital transformation solutions. Does this sound like your next career move? If you’re ambitious to grow, this may be your next role? The Role: This role is for a Senior Mechanical Engineer—someone ambitious and ready to make an impact. You’ll be results-oriented and driven to succeed. You’ll be leading a small, experienced, and collaborative team, and be responsible for: Leading the development of a fluid system Process Flow Diagrams, Piping and Instrumentation Diagrams, Layout Drawings, Component Sizing Calculations, Component and Equipment Datasheets and Specifications, and other concept or detailed design-related documents Systems Engineering, Integration of system design into the wider power plant Act as technical support and point of contact for interfaces and stakeholders The Individual We’re looking for people who can show: Nuclear sector background or other highly regulated industries such as thermal power generation, oil and gas and process sectors. Fluid system design development. FEED through to detailed design and EPC delivery. Development of procurement specifications and working with equipment suppliers. Appreciation and application of ASME, European and UK codes and standards. Systems Engineering Educational background to a Bachelor’s degree or Higher National Diploma in an engineering discipline & CEng in a relevant discipline or working towards Professional Registration. Eligibility for a high level of security clearanceThe Benefits: Competitive salary package Training and Development Career progressionDoes this sound like your next career move? Apply today. Working with Certain Advantage We go the extra mile to find the best people for the job. If you’re hunting for a role where you can make an impact and grow your career, we’ll work with you to find it. We work with businesses across the UK to find the best people in Finance, Marketing, IT and Engineering. If this job isn’t for you, head to (url removed) and register for job alerts and career guidance tips

IT Technician Placement Programme - No Experience Required Our training will help you kick-start a new career in IT. We are recruiting for companies who are looking to employ our IT support Traineeship graduates to keep up with their growth. The best part is you will not need any previous experience as full training will be provided. You will also have the reassurance of a job guarantee upon completion. Whether you are working full time, part time or unemployed, this package has the flexibility to be completed at a pace that suits you. The traineeship is broken down into 3 easy steps, which can be finished in as little as 3 months: Step 1 - Online Training The first step is completing a selection of professional, accredited and industry recognised IT Support courses by CompTIA, Microsoft and Cisco. The training is delivered via multimedia rich video tutorials, presentations and quizzes through a portal that you study from home. You will also be assigned an expert tutor to help you throughout your training. Step 2 – Practical Training You will gain the practical experience by using our cutting edge Livelabs. Gaining hands-on experience is essential in today’s IT industry for both certifications and keeping up to date with new technologies. Theory is often not enough these days, companies require hands on practical experience to make sure you're job ready. Step 3 – Official exams You will then go on to sit the CompTIA A+ exams to give you the official certifications which will be recognised worldwide. The CompTIA A+ is the most commonly asked for certificate in entry level IT roles. Guaranteed Job Placement At this point you will have fully completed our IT Support Traineeship and be ready to start work. Through our range of partnerships throughout the UK with IT organisations, we are able to place you into an entry level IT role within your local area. We can guarantee you a starting salary of between £20-30k, working in either an IT Technician/Desktop Support/First Line Support Role. We guarantee you will be offered a job upon completion or we will refund you 100% of your course fees back. At a one off cost of £795, or a deposit of £112 followed by 10 interest free monthly instalments of £78, this represents a great opportunity to start a rewarding career in IT. Read through the information? Passionate about starting a career in IT? Apply now and one of our friendly advisors will be in touch. ‘Please note that this is a training course and fees apply

I have an exciting opportunity for an experienced Occupational Health Advisor to join an OH team, reporting to the Clinical Lead. In this role, you will deliver high-quality occupational health advice and services to our clients employees, including expert, evidence-based case management for referrals related to attendance, fitness for work, and other occupational health matters. Key Responsibilities • Provide professional, comprehensive, and evidence-based written reports., • Offer expert advice on legislative requirements and best practices relating to occupational health., • Provide Travel Advice, • Triage Referrals, • Deal with Heakth Survillence Escalations, • Carry out PPQ's I am looking for a dedicated and highly skilled Occupational Health professional with a current registration on Part 1 of the NMC register. A postgraduate qualification in Occupational Health (Degree or Diploma) is essential, while additional qualifications, such as one recorded on Part 3 of the NMC register, an MSc in an OH-related field, or dual RN/RMN registration, would be highly desirable. The ideal candidate will have excellent written and verbal communication skills, strong time management, and a clear understanding of their scope of practice and when to escalate for support. IT literacy and knowledge of data protection and confidentiality principles in occupational health are essential, with advanced IT skills and the ability to present, teach, or train being advantageous. You should have a solid understanding of occupational health and employment legislation, along with experience in case management, providing OH advice, conducting medicals, and performing health surveillance. Additional experience in mentoring OH students, managing OH teams, administering vaccinations, or providing advanced ergonomic advice would be desirable. I am looking for a flexible and self-motivated individual who is committed to excellence, works well both independently and as part of a team, and demonstrates strong negotiation and motivational skills, with the ability to provide and receive constructive feedback. If you meet these criteria and are passionate about delivering high standards of occupational health services, I would love to hear from you! Hours The role is for 22.5 hours per week, 7.5hours per day, working Monday to Wednesday with 2 days being on site and 1 day being homebased Salary We are offering a competitive salary for this role, dependent on qualifications and experience, alongside our regularly reviewed company benefits package. You will receive: • Competitive annual salary dependent on qualifications and experience, • Contributory pension scheme up to 6%, • Life assurance, • Starting on 25 days annual leave plus bank holidays, increasing with length of service, • Have a day off for your Birthday (non-contractual benefit), • Discounted gym membership, • Cycle to work scheme, • Health cashback plan Professional membership fees for clinical staff • Annual Fees paid for NMC, • We also offer a wide range of Career Professional Development (CPD) opportunities

Service Team Leader - IDVA (Domestic Abuse) Salary: £31,350 a year Location: Derbyshire Hours per week: 37.5 Contract type: Fixed Term As an IDVA Service Team Leader, you’ll oversee the day-to-day running of our Derbyshire IDVA Service. You’ll work with the service manager to manage and develop the team to work within a multi-agency framework to provide a quality and proactive service to people affected by domestic abuse. You’ll also be responsible for monitoring and developing the service to maintain positive stakeholder relationships. Job requirements • Work closely with the Service Manager to ensure customers receive a professional, timely and coordinated service with clear, up-to-date advice on available options., • Lead on advocacy for customers with criminal justice services, housing, children’s and adult services, and other partner agencies., • Lead, manage and support a team to deliver trauma-informed, person-centred services, ensuring staff work safely, effectively and efficiently., • Support daily triage, allocation of cases and high-quality case management, including audits to ensure accurate records and GDPR compliance., • Manage and resolve escalated customer issues and concerns., • Monitor outcomes and reporting on case management systems to support service evaluation and stakeholder reporting., • Participate in the Managers' on-call rota and deputise for the Service Manager when required. What we’re looking for • Relevant IDVA qualification or willingness to complete Safelives training., • A good level of education such as GCSE English and maths, or equivalent., • Evidence of self-development or formal learning and development in sector skills., • Minimum 2 years experience of supporting individuals who have experienced domestic violence, forced marriage or ‘honour-based violence’ in an IDVA role or equivalent. • Experience in team leadership, supervision and case management., • An understanding of domestic abuse, including the impact on those affected by it and the legal and practical remedies available to them., • An understanding of safeguarding issues and procedures and legislation relating to domestic violence., • Good crisis management skills and the ability to work effectively under pressure and to deadlines., • IT literate and confident with Microsoft 365 and case management systems., • DBS check and Police vetting., • Full UK driving licence with access to own vehicle for work. Be a catalyst for change and help us impact the way our region addresses abusive relationships. Apply now! #DomesticAbuse #RelationshipAbuse #Derby #JobsThatGiveBack #FullTime #DomesticAbuseTeamLeader #TeamLeader #GreatBenefits #IDVA #IDVAService #DomesticAbuseIDVA

SF Recruitment are extremely excited to be working with a fresh, forward thinking and innovative business in Derby to recruit for a Customer Service Administrator. This role is exclusive with SF, so please apply through us if you are interested. Customer Service Administrator Derby | Permanent, full time Monday to Friday 9-5pm (this may amend over time, so please allow for some flexibility) £27,000 - £28,000 base salary + bonus scheme We are looking for a passionate and motivated individual who is excited about becoming part of a growing business and contributing to its continued success. The company is currently in a fantastic phase of growth, making this a great opportunity for someone who wants to develop their career and be part of an exciting journey as the business continues to expand. This role sits within the healthcare sector, making it an excellent opportunity for someone who has an interest in or enjoys working in this field. Key Responsibilities: -Work closely with the Customer Service Manager to ensure a consistently high level of customer satisfaction -Respond to customer enquiries via phone, email, and live chat in a professional and timely manner -Provide customers with order updates, delivery information, and accurate lead times -Resolve order-related issues, including missing, delayed, or damaged goods -Liaise with couriers and internal teams to investigate and resolve delivery issues -Support customers by advising on products and helping them choose the best options for their needs We are looking for: -A thorough hands on individual -A team player, with excellent communication skills -A candidate who possesses solid customer service and administration skills -IT literate and software capable Is this you? Get in touch

Working here isn’t just a job. You can advance your career at Avove, and we’ll reward you with a range of benefits that recognise great work. We provide full training and continuous development to help you reach your potential. We strive to create an inclusive working environment where everyone can be themselves. Join us and take the next step towards a fulfilling career. We understand the impact our work has on our society and the environment. It’s the difference we make that improves people’s lives and helps the economy to grow. We work alongside our customers to deliver resilient, bespoke infrastructure solutions that keep the taps running, the energy flowing and people connected. The work we do together matters. About the role Due to continued company growth, we are looking to appoint a Project Manager. In this role, you will take ownership of high‑profile pipeline projects, leading delivery from early planning stages through to commissioning. This is a hands-on leadership position that requires strong commercial awareness, technical expertise, and effective stakeholder management skills. Responsibilities * Lead safe, compliant, and efficient pipeline delivery * Manage programme, cost, and risk under NEC contracts * Coordinate multidisciplinary design & construction teams * Navigate environmental, land, and stakeholder constraints * Drive productivity, quality, and performance outcomes About you * Delivery of large diameter pipeline schemes * Linear works across rural / semi-rural corridors * Trenchless crossings & complex interfaces * NEC contract administration * Managing multi-disciplinary site teams * Clean water / utility infrastructure background * Strong commercial & programme controls * Experience with land access & stakeholder coordination * Ability to lead under technical & environmental constraints What’s in it for you… We offer a rewarding salary that is tailored to your skills and experience. But that’s not all! We celebrate hard work and give recognition to our colleagues. In addition to this, we understand that one size doesn’t fit all so everyone has access to a variety of flexible benefits that work for you. * 24 days holiday plus bank holidays * Company pension scheme * Life assurance * Family friendly policies * A selection of lifestyle benefit options * Financial wellbeing programme * Employee assistance program for health and wellbeing and onsite mental health first aiders to support our colleagues. We love to give back so we offer you volunteering days in your community and charity matched giving where we will boost your fundraising. Rewards initiative for achieving recognised professional qualifications. About us… We design, build and maintain the UK’s utilities infrastructure to help transform local communities for the better. We provide cutting-edge and sustainable engineering solutions and play a critical role in helping to keep the water running, the lights on and people connected. We are an expert, responsible and agile partner, providing vital services to water, power and telecommunications sectors. We work closely with our clients to help protect and improve their assets, enhance customer experience and protect the natural environment. Everything we do is designed to drive continual improvement and move life forward. We are proud to work in partnership with leading utility providers, including Severn Trent, United Utilities, Yorkshire Water, Northern PowerGrid, Northumbrian Water Group, Scottish Power Energy Networks and Scottish Water We are an equal opportunities employer... We welcome applications from candidates of all races, genders, disabilities, religions, ages and sexual orientations. We know that having a diverse workforce encourages new perspectives, inspires creativity and creates an engaging workplace and we are committed to creating an inclusive environment where all colleagues can thrive. When it comes to inclusion, we’re making sure we keep up the progress with our Communities of Practice, who help us do just that. What next... We encourage you to apply for this role as soon as you can. We recognise talent waits for no one, so we progress candidates individually through all stages of recruitment process. If you have any questions, please reach out for an informal discussion

Wanted: M&E Manager Salary: £45,348.00 – £62,354.00 + Car Allowance + Benefits Do you want to be part of a long-standing team, who are experts in their field, where no two days are the same and where possibilities to develop new skills and experiences are around every corner? PDS is passionate about creating a friendly, open and inclusive working environment where individuals are supported to excel in their area of expertise. We are continually seeking out new ways to improve our business and are firm believers that everyone should enjoy what they do. What we do… We are a technically driven business with over 30 years of expertise; engineering and supporting high integrity control systems where failure simply isn’t an option. These can range from small upgrades through to fully integrated turnkey solutions, covering all aspects of technology from control room to field devices. We supply the latest technology to various locations throughout the UK with our prestigious clients predominantly being within Intelligent Transport Systems (ITS), Highways, Airports and Power sectors. If you are a keen problem solver with excellent communication skills, looking for a challenging yet rewarding career in engineering, look no further. We have an opportunity for an enthusiastic and ambitious M&E Manager to join us on our mission to seamlessly deliver end-to-end control systems. What we need from you. A well organised team player who has exceptional attention to detail and is familiar with electrical infrastructure and electrical principles. You will work as an M&E Manager, holding a qualification in electrical engineering and/or electrical HND, whilst also having the appropriate skills and experience to fulfil the following duties. Key Responsibilities: Tender Stages * Co-ordinate and attend site surveys * Assist in evaluating M&E supplier proposals * Assist in generating PDS proposals for M&E requirements Project Delivery for M&E Works * Co-ordinate and Attend site surveys. * Produce technical and delivery requirements for supplier quotations and carry out evaluation. * Attend design meetings (along with design sub-contractor as required). * Provide support to PDS Site Supervisor in site progress meetings. * Assist the Project Manager in the planning, execution, and completion of the M&E sub-contract works. * Manage suppliers progress and performance, ensuring alignment with project plans. * Manage production of designs (by supplier) such as equipment locations, installation designs, equipment designs etc. * Manage M&E Factory Acceptance Tests and review all relevant documentation. * Manage co-ordination of designer and installer which may be different sub-contractors. * Review site test documentation and RAMS. * Manage site supervisors for M&E works. * Manage installation handover. Staff Management * Line manage Commissioning Engineers, Electrical Design Engineers and CAD. Requirements: Required Skills & Experience * Electrical Engineering and/or electrical HND qualification with proven experience. * Familiar with electrical infrastructure, electrical principles. * Excellent IT competency – Excel and Word mandatory * Strong supplier and client management skills. * Working knowledge of client management skills. * Ability to work under pressure and to tight deadlines. * Excellent attention to detail. * Flexibility and adaptability to juggle a range of different tasks and to work extra hours to meets deadlines. * A Full UK Manual Driving License. * Due to the nature of the role, candidates must be legally permitted to work in the Republic of Ireland without restriction. * The company does not offer sponsorship for this role. There is plenty of room for growth and progression which is proven by most of the management team beginning their career with us as students. What we offer in return. In addition to your salary, you can expect to receive some other great benefits too. 33 floating holidays. Company performance related bonus. Wellbeing benefit. Pension scheme. Life insurance and Health benefits. Salary sacrifice schemes – Tech, Cycles and EV. Subsidised on-site charging for EVs. Anniversary celebrations. Social events. Hybrid working Hours. Flexible working. We pride ourselves on being a great place to work but don’t just take our word for it, here’s what Technical Sales Engineer, John has to say. “The nice and decent people are what make the company. The professionalism of the company and the way it is ran is excellent; it is well organised and always comes through on any agreements as and when expected. I would say it is on top of its employee relations. I mainly work within BMS and Infrastructure, BMS being my area of expertise. I find my work interesting, enjoyable and challenging, not only does it utilise the experience I have previously gained but provides me with the opportunity to continue developing; there’s lots to get your teeth into! If I could describe PDS culture in three words it would have to be friendly, inclusive and professional.” So why not join us? CV’s, covering letters, questions, and everything in-between by using the apply button provided

CNC Tooling & Precision Capital Equipment CNC Engineers - are you looking for a change in career? You know what good machining looks like. You understand tooling. Runout. Offsets. Scrap rates. Downtime. Youve probably stood at a machine at 10 pm fixing something that should have been right in the first place. Now imagine being the person who prevents those problems. We are recruiting for a Technical Sales Engineer to join a specialist capital equipment provider supplying precision tool presetting and inspection systems into high-end manufacturing environments. This isnt box-shifting. This is consultative technical sales into serious engineering businesses. And they're open to the right CNC professional stepping into sales. What You'll Be Doing Visiting precision engineering and manufacturing companies across the UK Demonstrating high-spec machine tool presetting and inspection systems Advising customers on improving accuracy, reducing downtime and increasing efficiency Managing enquiries from initial discussion through to quotation and close Building long-term relationships with Production Managers, CNC Programmers and Directors Representing the company at trade shows and industry events Youll need to understand machining properly. Customers will see through you if you dont. What Theyre Looking For Background as a CNC Programmer / Setter / Operator Strong understanding of tooling and machining processes Commercial awareness or a genuine interest in moving into sales Confident communicator who can hold their own in a machine shop or boardroom Self-motivated and target-driven Willing to travel across the UK with occasional nights away Full UK driving licence Sales experience is useful. It isnt essential. Engineering credibility and drive matter more. What's On Offer Competitive basic salary Performance bonus Company vehicle Laptop and mobile Pension with company contribution Structured training and clear progression This is a genuine opportunity to move from the shopfloor into a long-term technical sales career, without losing your engineering edge. If youre good at what you do and you know youre capable of more, this is worth a conversation. About Us: At Thomas Lee Recruitment, we specialise in connecting engineers and technical salespeople with leading companies in the engineering sector. We pride ourselves on offering a personalised, professional, and transparent recruitment service. Our focus is on understanding both client and candidate needs to ensure the best possible match. How to Apply: All applications will be responded to. Please ensure you have the right to work in the UK before applying. By applying for this role, you accept our Terms & Conditions, Privacy Policy, and Disclaimers, which can be found on our website

Company Description ⚡️ About Assystem Assystem is an international engineering and project management group accelerating the energy transition worldwide. Our 8,000 Switchers combine decades of engineering expertise with digital innovation to deliver complex, safety-critical infrastructure. In the UK, we play a key role on landmark programmes including Hinkley Point C, Sizewell C and emerging Small Modular Reactor developments, supporting the delivery of secure, low-carbon energy for the future. Why Join the Community of Switchers? You will be joining one of the three largest nuclear engineering companies in the world, working at the heart of the UK’s most significant energy programme. Assystem offers exposure to world-class projects, long-term career stability, and the opportunity to work alongside highly experienced engineers and delivery teams. Your future team values collaboration, practical problem solving, and engineers who want to make a real impact on site. Job Description This is a predominantly remote role with maybe occasional trips to one of our offices. You will support turbine system engineering activities across operational nuclear power plant assets. The role focuses on technical oversight, performance analysis, and engineering documentation for rotating plant. You will collaborate with multidisciplinary teams to resolve complex turbine and thermal system challenges. ⚙️ Lead engineering activities related to steam turbines, governors, valves, and auxiliary systems Provide technical oversight, troubleshooting, and performance analysis of turbine plant Develop and review specifications, calculations, reports, and modification proposals Support maintenance strategies and engineering improvements for rotating plant systems Collaborate with site engineering teams, safety specialists, and external suppliers Ensure engineering documentation aligns with regulatory and operational requirements Communicate technical decisions clearly to engineering and operational stakeholders Qualifications Nuclear experience is not essential, but is of course welcome. If you have worked within a highly regulated environment, your skills and approach are highly transferable and of strong interest to us. We also recognise that the perfect candidate rarely exists. If you feel you meet around 80% of the criteria and are motivated to develop further, we would strongly encourage you to apply. Bachelor’s degree or HND in Mechanical or related engineering discipline ️ Minimum eight years engineering experience within complex industrial environments ⚡ Experience with thermal power systems including steam turbines and associated equipment Background within nuclear, power generation, oil and gas, or similar industries Strong knowledge of turbine auxiliaries such as condensers, pumps, and feedwater systems Experience producing engineering documentation, reports, calculations, and specifications Understanding of mechanical plant performance analysis and troubleshooting Chartered Engineer status or working towards professional registration desirable Additional Information Ready to Make an Impact? This is an opportunity to contribute to nationally significant energy infrastructure while developing your technical depth within a globally recognised engineering organisation. If you want real responsibility, exposure to complex mechanical systems, and the chance to grow within one of the world’s leading nuclear engineering companies, this role offers long-term progression and stability. Benefits include: Hybrid Working Opportunity Flexible working hours ️ Market Leading Pension scheme (8% company contribution / 4% personal contribution) ️ 25 days’ paid annual leave + bank holidays + option to buy or sell days Professional fees reimbursed Employee referral scheme Competitive Sick Pay – Support when you need it Income Protection & 3x Salary Death-in-Service Cover Free Digital Gym Access – Expert-led fitness classes 24/7 Employee Support Line – Mental health, financial & legal help We are committed to equal treatment of candidates and promote, as well as foster all forms of diversity within our company. We believe that bringing together people with different backgrounds and perspectives is essential for creating innovative and impactful solutions. Skills, talent, and our people’s ability to dare are the only things that matter !. Bring your unique contributions and help us shape the future

Mechanical Design Engineer Due to sustained growth, a significant forward order workload and a continued commitment to be at the forefront of the industry, our client is now searching for a talented and motivated Mechanical Design Engineer. The successful candidate will be responsible for supporting the successful delivery of innovative, creative and winning design packages in line with client key drivers, and project programs and budgets. This Mechanical Design Engineer role is based out of our client's North Derbysbire office and includes working from home for one day a week. The working week is 37.5 hours. The Role • To design a wide range of bespoke products ensuring compliance with client specifications, legislative requirements, quality and HSE standards., • To work independently or as part of a team to develop new or existing products that meet the mechanical technical requirements of form, fit and function., • To provide a professional mechanical engineering design service to the business and so interface with customers and suppliers to ensure activities are completed to meet or improve program, cost and quality expectations., • Work with the wider team to help develop customer requirements and understand their potential implications to the business, • Develop concept solutions and support discussions to compare and contract different options, • Seek input from manufacturing department, supply chain contacts and project team, • Further develop selected concepts in sufficient detail to enable production of detail definition drawings, • Action risks and opportunities as the design develops so they can be understood by the wider team, • Prepare engineering calculations in support of detail design schemes, • Present designs at design reviews as required, • Participate in research and development activities, • Carry out and take responsibility for site survey activities on an occasional basis, • Use IT packages effectively in the course of engineering activities (excel, word, mathcad, CAD, PDM, PLM, etc.), • Interpret engineering drawings, • Generate concise and presentable sketches and reports for issue to a range of customers, • Interpret and implement engineering specifications and standards, • Self-development to meet new requirements, • Manage project timescales and achieve or improve deadlines, • Provide progress status reports to line management on a regular basis and work to achieve or improve company and customer objectives of program, cost and quality, • Responsible to the Design Manager for all aspects of the mechanical design and integrity of the company’s range of products, • To lead by example on the mechanical discipline and operate to the highest engineering professional code of conduct The Person • The successful candidate will possess a mechanical engineering degree and demonstrable experience in a similar role, • Possess the ability to deliver real working solutions which balance the requirements of functionality, design integrity, manufacturability, serviceability and costs., • Ability to create and understand technical designs to satisfy customer requirements, • Proficiency in of standard industry design packages, • A focus on building and maintaining client and supplier relationships., • Strong organisational and communication skills to support project and company goals, • Experience of working in a fast-paced environment and delivering to challenging timescales, • Possess a full UK driving licence Our client is a market leading design, build, installation, fabrication and maintenance organisation operating at the cutting edge of engineering excellence driven and supported by a passion for innovation. They have continuously diversified and expanded their expertise, enabling them to deliver a huge range of advanced engineering solutions for the Aerospace, Marine, Energy, Infrastructure and Automotive sectors, amongst many others. They not only always complete projects successfully and to the highest of standards but also add value to their clients by giving total support from the beginning to the end of every contract. An attractive basic salary plus extensive benefits package is on offer to the successful candidate, along with longevity and security of work and forward career progression given that our client possesses a significant contract pipeline for the long-term future and is firmly committed to continued growth over the next 5-10 years

An opportunity has arisen for an experienced finance professional to join an established organisation in a key business partnering role. This position will support operational and strategic decision-making by providing high-quality financial insight, planning, and reporting. The role is suited to someone who is commercially aware, analytically strong, and confident working closely with senior stakeholders to improve performance, support planning, and contribute to wider organisational objectives. The role Working as part of a wider finance function, the successful candidate will provide financial support across a broad operational area. The role will focus on budgeting, forecasting, reporting, performance analysis, and advising stakeholders on financial matters to support effective decision-making. This is an excellent opportunity for someone who enjoys combining technical finance expertise with a collaborative and consultative approach. Key responsibilities Support the preparation and management of budgets, forecasts, and financial plans Analyse financial information and provide clear insight to support decision-making Monitor financial performance, identify trends, and recommend actions where needed Provide financial guidance on projects, planning activity, and operational initiatives Contribute to accurate and timely financial reporting Build effective working relationships with key stakeholders, acting as a trusted financial advisor Translate financial information into clear and practical recommendations Support the review and improvement of financial processes Ensure compliance with relevant policies, procedures, and regulatory requirements Essential experience and skills Proven experience in a finance business partnering, financial planning, or management accounting role Previous finance experience within the education sector is essential Strong understanding of budgeting, forecasting, financial analysis, and variance reporting Ability to interpret complex financial data and present it in a clear and meaningful way Strong communication skills, with the ability to work effectively with stakeholders at different levels Well organised, with the ability to manage multiple priorities Relevant professional qualification such as ACA, ACCA, or CIMA, or equivalent experience Desirable experience Experience supporting multiple service areas, departments, or operational teams Knowledge of financial compliance and reporting requirements within an education setting Strong systems skills, including financial reporting tools Experience supporting process improvement or organisational change Apply If you are a finance professional with education-sector experience and a strong business partnering approach, we would welcome your application. Please submit your CV for consideration. TPBN1_UKTJ

Learning Support Assistant – Full Time | Year 11 Support | Immediate Start Education Personnel – East Midlands Education Personnel, a leading specialist in education recruitment across the East Midlands, is seeking a dedicated, emotionally intelligent and compassionate Learning Support Assistant to work full time supporting a Year 11 student in a welcoming and highly supportive secondary school in Derby. This role is to start as soon as possible and will continue until the end of the academic year. This is a truly meaningful opportunity to make a genuine difference to a young person approaching GCSEs, within a school that places inclusion, wellbeing and individual development at the heart of everything it does. The school is known for its strong pastoral support, collaborative staff culture and commitment to nurturing both students and staff. About the Role You will work on a 1:1 basis supporting a Year 11 student who thrives with the right relational approach. The role is focused on building trust, emotional safety and consistency, enabling her to access learning and feel confident in school. We are looking for someone who: Is calm, patient and consistent, and does not become frustrated when challenges arise Is genuine, predictable and respectful of difference Communicates clearly and is able to explain or repeat information in different ways Is emotionally regulated and able to model calm behaviour Understands that withdrawal or shutdown is not personal or rejection Is proactive and reflective rather than reactive Can build rapport through natural conversation, but is equally comfortable with quiet moments Is warm, friendly, gentle and caring in their approach Understands the importance of a low-demand, low-pressure relationship to reduce anxiety Can advocate for the student and support her in understanding different perspectives Makes her feel safe, accepted and unhurried, especially around communication Shows understanding of anxiety and demand avoidance, recognising this as a need rather than refusal Accepts and values the student for who she is Is confident, socially aware and able to build a positive relationship that feels natural and respectful This young person needs a supportive adult who builds trust first and places emotional safety at the centre of all interactions. ⭐ Why Work in This School? This well-regarded secondary setting offers: A strong focus on pastoral care and student wellbeing A collaborative and friendly staff team A calm and supportive environment Excellent leadership and clear support structures Opportunities for professional development A values-led ethos centred on respect, inclusion and belonging Modern facilities and a positive learning culture Why Work with Education Personnel? Competitive daily rates Ongoing support from a dedicated consultant Flexible and long-term opportunities Weekly pay Access to training and CPD A supportive and experienced recruitment team who understand schools and SEND If you are a nurturing, emotionally intelligent and reflective practitioner who wants to make a lasting difference to a young person at a crucial stage in their education, we would love to hear from you. Apply today or contact Education Personnel to discuss this role further. Interviews and registrations are taking place this week

Payroll Coordinator Location: Derby Salary: Up to £40,000 Working pattern: Hybrid (1-2 days in the office) Flexible hours available:- Monday - Friday 9am - 4pm Part-time candidates are encouraged to apply as well as Full-time as we have options available The Company Our client is a well-established and highly regarded payroll bureau based in Derby, supporting a large and varied portfolio of (Apply online only) external clients. They are known for offering a hugely supportive working environment, where hard work is genuinely recognised and rewarded with flexibility. The business places strong value on trust, work-life balance and employee wellbeing, making it an excellent long-term opportunity for an experienced payroll professional. Due to an urgent requirement, they are now looking to recruit an experienced Payroll Coordinator. The Role This is a hands-on, client-facing payroll role within a busy bureau environment. You will be responsible for delivering accurate and timely payroll services while building strong, trusted relationships with external clients. Key Responsibilities: Managing end-to-end payroll processing for a portfolio of clients Processing weekly, fortnightly and monthly payrolls Acting as a key point of contact for client payroll queries Building and maintaining strong client relationships Processing statutory payments and deductions Administering CIS payrolls Completing P11Ds Liaising directly with HMRC Ensuring payroll accuracy, compliance and adherence to legislation Using Sage payroll and associated systemsThis is a reactive role within a high-volume payroll environment, so the ability to prioritise, manage deadlines and remain calm under pressure is essential. The Candidate Essential: Proven experience in a payroll bureau or high-volume payroll environment Strong end-to-end payroll knowledge Experience using Sage payroll Good working knowledge of HMRC processes Experience with CIS and P11Ds Confident communicator with strong client-facing skills Ability to manage multiple clients and deadlinesDesirable: Experience using Verify Payroll experience and knowledge of HMRC regulationsWhat's on Offer? Salary up to £40,000 Hybrid working 1-2 days in the office Flexible working hours Supportive, people-focused working environment Hard work recognised and rewarded with flexibility Part-time applicants are actively encouraged to applyIf you are looking for a part-time role, please apply - my client offers flexible hours and is happy to discuss working patterns

Sales Advisor | Derby | Up to £40k + Uncapped Commission We're looking for a commercially driven Sales Advisor with a strong telecoms or target-led sales background to join a premium retail environment experiencing impressive growth. This is not a passive, transactional role. It suits a Sales Advisor who thrives on approaching customers, building rapport quickly, and confidently converting conversations into sales. If you're used to working to targets, handling objections, and driving upgrades or add-ons, you'll feel right at home here. The Role Drive personal sales performance and exceed individual KPIs as a Sales Advisor Proactively approach customers and create meaningful conversations Convert footfall into sales through confident, consultative selling Maximise ATV through add-ons, cross-selling, and upselling Maintain high standards across the shop floor Contribute to a motivated, high-energy team culture About You Background in telecoms, mobile sales, broadband, utilities, or another target-driven sales environment Proven track record of hitting and exceeding sales targets as a Sales Advisor Confident initiating conversations and overcoming objections Energetic, resilient, and commercially focused Polished, professional, and comfortable in a premium setting Motivated by commission and performance-based rewards Package Competitive basic salary Uncapped commission structure Clear earning potential linked to performance Opportunity to join a growing premium retail brand with progression potential This is a great opportunity for a strong Sales Advisor who enjoys the thrill of closing and wants to bring that drive into a premium retail environment. If you're target-focused, confident on the floor, and motivated by commission, please apply now. BH35618

Non Destructive Test Engineer (NDT) Background Risktec Solutions is an established, independent and specialist risk management consulting and training company, and is part of the TÜV Rheinland Group. We assist clients in major hazard industries including oil and gas, clean energy, nuclear and transportation, as well as commercial and public sectors, to manage health, safety, security, environmental and business risk. Our people are high calibre professionals, with a strong focus on meeting clients’ expectations. We are seeking experienced NDT Engineers with specific pressure systems knowledge to take up positions in its expanding Asset Integrity Management team based in Derby, UK. The successful candidates will play a key role in delivering solutions for our clients. Most of the team’s activities are focused on the Conventional Power and Clean Energy sectors (primarily CCGT, Biomass and Energy from Waste plants). Duties and responsibilities will include: Site visits to carry out plant inspections. Coordinating / supervising inspection activities e.g. on outages (depending on qualifications and experience). Producing high quality inspection reports. Reviewing and authorising inspection reports (depending on qualifications and experience). Estimating and managing project costs. Maintaining up-to-date knowledge of standards, legislation, good practice, methods and use of appropriate equipment and software. The role will involve travel, both within the UK and abroad, to meet project requirements. Experience: You should have: Good practical experience in the inspection of a range of plant components, in particular steam and water pressure parts (both in the new / as-installed condition and after in-service degradation has taken place). An appreciation of the damage / degradation mechanisms that can take place on the components being inspected. Working in conventional power or clean energy sectors (primarily CCGT, Biomass and Energy from Waste plants). It would also be an advantage to have: Experience in the ultrasonic testing of branch connections. Experience of working on plant outages, including a proven track record in a coordinating / supervisory role for outage inspection activities, including liaison with the client and other key stakeholders. Required Qualifications: As a minimum you must hold PCN Level 2D certification in magnetic particle testing, penetrant testing and ultrasonic testing of welds. The following would be a particular advantage: Certification to PCN Level 2 in phased array ultrasonic testing and / or TOFD. Certification to PCN Level 3 in any testing method. Project management experience. NEBOSH General CertificateRewards: A competitive package of salary and benefits is offered for permanent staff this includes the following. Profit Share Pension (7.5% company contribution) Life Assurance Permanent Health Insurance Private Medical Insurance Employee Assistance Programme Flexible Leave Flexible Working Employee Discounts Salary Sacrifice Options Professional and Postgraduate Training Professional Subscriptions Skills Training

Pektron Group Ltd is searching for a Senior/ Principal Embedded Software Engineer who will be responsible for writing software for a range of bespoke products. Our Engineering attitude is confident and can do and with solid research and a lot of intuition we nearly always succeed Nearly all of our code is written in C, mainly because its the most widely available language for the variety of 32 bit micros we use on our boards and were good at it! We pride ourselves on efficient reliable software and we mix our hardware and software teams together so that we can get the most out of our micros and we get it right first time. All of our code is collaboratively developed with our peers, so you get to learn from the people that know that technology best. We love engineering and our lunchtime conversations are made up of 3D printing, motorbikes, hyper cars (we sometimes get to play with these), electric vehicles ( weve worked on some of these too) and any other areas of science and technology. We use a model-based design approach to develop our Application code, via the use of MATLAB, allowing us to spend less time on coding and more time thinking about good quality architecture and design and let the tools (when driven correctly) do the coding! Obviously, theres always plenty of code to be written and we continue to do low and middle level software the traditional way by writing embedded C. You : You will be a highly motivated and self-managing Embedded Software Engineer with preferably the experience of working in a customer facing, commercial environment. You will have a highly developed, structured approach to design and the ability to compose a design rationale, along with good technical writing skills and a willingness to work within our collaboratively developed software design ethics and style. The role : You will be working within the Software Development Team which is part a multi-disciplined engineering team, consisting of Mechanical, Electronic and Firmware Engineers (approx. 60 in total). New business is primarily focused on the off-highway vehicle and high performance luxury car markets; however Pektron designs and manufactures a wide range of products for Gas, Automotive, Construction, Agricultural, Off Highway, Safety and Consumer industries. You will have the opportunity to write software for interesting and diverse projects as well as specify tools, requirements and drive the software discipline within the company, and to be involved in every aspect of the product life cycle from quotation, concept, design, and validation through to manufacture. Recent projects include : Design and manufacture of advanced body control systems including passive keys and active suspension systems for high performance vehicles. Developing advanced instrument clusters, infotainment units, passive entry systems, body and chassis control systems for major OEM clients in the automotive, agricultural and construction sectors. Experience and skills required : Exceptional Fault Diagnosis and Analysis Embedded Programming in C Version Control Static Analysis / Code Metrics Microprocessors 8 & 32 bit Low Level Drivers for External Hardware / CPU Peripherals or Embedded Application Development Software verification and validation Communication Spoken/Written/Technical English must be of a minimum of IELTS 7 or SELT B1 Additional points that would be an advantage Knowledge of Real Time Control Experience of Software Architecture and Detailed Design Ability to travel freely (some customers are based in US / EU) Familiarity of working within MISRA C rules Working experience of AUTOSAR architecture Programming: Windows/Linux, C#, C++, high level structured languages Simple Electronic Design: Analogue / Digital Communications Protocols: Serial, CAN, LIN, Diagnostic, Ethernet Use Vector Vehicle Networking Tools such as CANoe / CANalyser Design / Modelling experience (For example: UML, MATLAB, Simulink, Rhapsody or Targetlink ) Experience of Graphics Processors & Driving TFT displays. Experience of NFC / Bluetooth / Ultrawideband Knowledge of CMMI / SPICE / ASPICE process frameworks Practical experience of working to ISO26262 ASIL-B or similar Practical experience of Cybersecurity and developing secure products. Whats on offer: Competitive salaries Yearly pay review 25 days holiday plus bank holidays Pension Free parking Free tea & coffee BUPA healthcare Life Insurance Cycle to work scheme Relocation assistance Funding for professional training and further education plus support in attaining professional membership and paid membership fees 39 hour working week with flexible start and finish times (core hours 10am-4pm / 10am-1pm on Fridays) We are not able to offer visa sponsorship, hybrid or remote working Location: We are based in Alfreton Road in Derby, easily commutable from the Derby area, Nottingham, Mansfield, Burton, Loughborough, Ashbourne and the Peak District and East Staffordshire. We have 5 modern, purpose built buildings at our Derby site including state of the art manufacturing facilities and a purpose built Engineering centre to house our Engineering team. Our facilities have been recognised as being one of the most modern and well equipped electronics design, development and manufacturing plants in Europe. Pektron are one of the largest privately owned electronics manufacturers in the world with 60 years experience delivering bespoke electronics hardware and software solutions to blue-chip companies globally. We are innovators in our field and invest in the best people, processes and equipment to drive technological development and meet our customers needs. At our HQ in Derby we employ 300 staff and operate Engineering, Manufacturing, Design, Testing, Quality and Support functions, whilst our Sales and Technology centre in Detroit supports our customers in the US. TPBN1_UKTJ

We are recruiting for a Team Leader to join a leading production environment in Derby. This is an excellent opportunity for an experienced manufacturing professional to take ownership of team performance, drive operational excellence, and contribute to continuous improvement within a fast-paced setting. The Role You will lead production teams across rotating shifts, ensuring operational targets are achieved while maintaining high standards of safety, quality, and efficiency. To be considered for the role, you’ll require the following essentials: Essential: A relevant management or engineering qualification, or equivalent hands-on leadership experience. Proven experience leading teams within a manufacturing or production environment. Strong understanding of engineering and assembly methods. Sound knowledge of Health & Safety practices within an industrial setting. Experience applying Lean Manufacturing or similar continuous improvement methodologies. Confident IT skills, including Microsoft Excel, Word, and Outlook. A structured, empathetic leadership style with the ability to motivate and develop teams. Desirable: Additional Health & Safety or continuous improvement certifications. Experience supporting digital transformation or operational change initiatives. Within this position, you’ll also be: Leading and motivating production teams to consistently achieve output, efficiency, and quality targets Monitoring performance, addressing variances, and proactively identifying operational risks Maintaining visual management and quality systems to ensure compliance with operational processes Driving a culture of continuous improvement using Lean Manufacturing and business improvement tools Analysing production challenges and implementing solutions to eliminate root causes and prevent recurrence Supporting new product introduction activities and contributing to innovation initiatives Promoting a safe, compliant, and respectful working environment across the manufacturing floor Collaborating with cross-functional teams to ensure seamless production and operational performance What’s on Offer 3 week shift rotation - earlies, mids and night shift £50,950 plus bonus On site parking 25 days holiday plus bank holidays Excellent pension scheme Family-friendly policies supporting key life events Talk Staff Recruitment is an established division of Talk Staff Group and works with companies throughout the East Midlands and UK with roles including many areas such as: Accountancy & Finance, Human Resources, Marketing, Contact Centre and Office Support. Talk Staff Recruitment act as an Recruitment Agency in relation to this vacancy. See our website for more details and jobs available - (phone number removed)

Please note this is a training programme with career placement and fees apply* If you are looking to progress a career in computer programming or web development, then this training and placement programme is made for you? Skills shortages in the IT sector are driving the need for qualified, entry-level career seekers and career changers. All you need is a desire to work hard and invest some time and money in yourself to build the foundations for a new career. We help you start your career journey in programming by firstly ensuring you have the necessary industry recognised certifications and skills required to build a career. We ensure you market yourself properly through a structured career driven cv and LinkedIn profile highlighting your skills, any experience, and relevant transferable skills from other roles. Finally, our tutors will help you create a credible portfolio to demonstrate your skills and abilities to potential new employers. We have many years of experience in helping graduates find their first roles in top UK companies and organisations who need to employ entry-level qualified programming staff that can hit the ground running with up-to-date skills gained from this programme. The programme is specifically designed for individuals with none or limited experience but a real desire to start a career. Therefore, please do not apply if you are already an experienced programmer. Whether you are working full-time, part-time or are unemployed, this package has the flexibility to be completed at a pace that suits you and can be completed in as little as a few weeks or a few months (see steps 1 to 4 below). Study timings are approximate and assume you can study for a minimum 5 hours per week. *Training times will be reduced if you are able to invest more time each week. Stage 1 – Learn HTML and CSS (*up to 12 weeks) The first step is completing a selection of professional and industry-recognised courses. We have carefully selected these courses to give you the most out of both your learning and employment journey. • HTML Essentials (*up to 6 weeks), • CSS Essentials (*up to weeks) Training is delivered through multimedia rich video tutorials, presentations and quizzes using an online portal enabling you to study online from anywhere you choose. You will also be assigned an expert tutor and a support mentor who will work with you 1-2-1 or in group sessions to provide additional training and support. Once the HTML & CSS courses are complete, your trainer will move you forward to the next stage. Stage 2 – Additional Online Training (*up to 12 weeks) The second step includes a selection of more advanced courses to get you up to speed for what is required and relevant for many entry level programming roles and help you get a step ahead. • Learn the Command Line (*1.5 weeks), • Learn Git & GitHub (*1.5 weeks), • Learn JavaScript (*1.5 weeks), • Learn Python 3 (*1.5 weeks) JavaScript forms the foundation of almost everything you see on the Internet. Therefore, this is an essential addition language in building your programming and development foundation. Python is a highly versatile programming language and due to its relatively “easy to understand” commands now one of the most common programming languages used. You can use it for both small and complex tasks, and it is used across many different industries broadening your scope of opportunity. Step 3 - Building a Portfolio Website Project (1 week) Your tutor will provide you with some exercises and guidelines to help you build your own personalised portfolio. Having a strong portfolio to which demonstrates and showcases your range of skills and ability is essential within a programming career. In addition, we will now provide additional Study Courses for your continued development and broadening of your skills. Completion of these course is voluntary but recommended. • AWS Certified Cloud Practitioner, • Microsoft Certified: Azure Administrator Associate Step 4 – Entry Level Coding placement (£25K - £40k) We will now work with you to help you secure your first role in a role utilising your new skills in a coding, programming, or web development role. Entry level roles typically start between £25K - £40k dependant on any prior knowledge or experience you may have. There are many entry level roles where your newly learned skills can be applied meaning a vast array of opportunities are now available to you. Examples of some of these are listed below: - • Junior Developer, • Website Support Developer, • Junior Web Developer, • Content Editor, • Wordpress Developer, • Junior Software Developer, • Junior Front or Back End Development, • Development Support We have been helping career changers and new career seekers gain new careers since 2009 and we are a CompTIA Gold Partner, accredited by the BCS (Chartered Institute of IT/ British Computer Society) to ensure we provide the highest levels of training. We also have a 4.9 Trustpilot rating and numerous testimonials available on our website. Our money back Job Guarantee Due to our success and confidence in the results we deliver, and the skills shortage for entry-level coding staff we guarantee you will secure a job upon completion of your study programme, or we will refund you 100% of your course fees back. This is subject to our terms of learning/ terms of business. Qualification for this programme? To ensure we maintain a high level of support for our candidates, we limit spaces to this programme. Apply before the deadline and one of our consultants will speak with you to check your eligibility for the programme

Sales Executive required for my leading client, please read the jobspec before applying. The Sales Executive will play a key role in building trusted relationships with new and existing customers. This is a people-first, insight-led sales role ideal for someone who enjoys building strong relationships, working collaboratively, and contributing to meaningful outcomes for customers. You’ll coordinate expertise across the business to shape solutions that solve real-world problems in Defence, Law Enforcement, and Government sectors. Key Tasks and Responsibilities External-facing activities of the role will include: · Research and identify potential customers and markets · Build professional, trust-based relationships with prospective clients · Qualify new opportunities based on customer needs and business priorities · Understand the customer's environment, use cases, and operational goals · Clearly articulate the benefits of the business secure information exchange offering and how it differs from competitors · Develop a sustainable pipeline of customer-driven opportunities · Coordinate internal teams and subject matter experts to progress and close opportunities · Represent the business professionally at industry events, special interest groups, and community networks Internal-facing activities of the role will include: · Capture and share market intelligence and customer insights with the wider sales and product teams · Contribute to the business market strategy through insight into customer challenges and operational trends · Feed into the marketing programme to ensure campaigns are aligned with customer pain points · Support wider sales activity, including attending customer meetings and contributing to bids and proposals · Maintain an accurate and up-to-date CRM record, and ensure proactive engagement across the customer lifecycle Required skill set · Proven experience in a client-facing sales role. · Experience in technology sales, software development, or cyber security is essential. · Confident and effective presenter—comfortable delivering both in-person and virtual presentations to a range of audiences · Able to engage with a broad spectrum of individuals, including highly technical specialists, senior decision-makers, early-career professionals, neurodiverse colleagues, and stakeholders with varying communication styles or levels of technical understanding · A natural organiser – comfortable managing multiple priorities and updating systems such as CRMs · Digitally literate and confident using tools to manage client relationships and workflow · A quick learner, able to build understanding of our customers and technology portfolio · Excellent interpersonal skills – enjoys networking, listening actively, and developing meaningful relationships · Exposure to complex or hierarchical environments (e.g. public sector) is beneficial but not essential Person Specification · Communication: Clear, confident communicator with strong written, verbal, and presentation skills. Adapts tone and content for different audiences · Personable and professional: Builds rapport quickly and consistently represents the business to a high standard · Emotional Intelligence: Self-aware, approachable, and adaptable to different personalities and situations. Values kindness, empathy, and professionalism in working relationships · Organisation and Time Management: Highly organised and dependable, with the ability to balance multiple priorities while maintaining attention to detail and supporting the wider team · Resilience and Tenacity: Comfortable with ambiguity, persistent in the face of challenges, and quick to bounce back · Driven and Proactive: Works well independently and takes initiative in building networks and uncovering opportunities · Creative Problem Solver: Curious, resourceful, and solutions oriented. Spots opportunities to add value for customers and support long-term relationships Our Values The Sales Executive will be expected to operate in line with and support the business’s core values which are: Focus, Adaptable, Respect and Collaboration Measures of Success • Number of agreed engagements., • Number and expected value of qualified opportunities created against an agreed target., • Number of wins resulting from these engagements

Client Name: University Hospitals of Derby and Burton NHS Role: Band 5 A&E Nurse Shifts: Flexible hours, with shifts available throughout the day, night and at weekends. Location: West Midlands Benefits: Access to Care4Carers - our support service to help support your mental health and well being and enable you to deliver outstanding care. Competitive pay rates First sight of agency nursing shifts across multiple trusts Excellent support from your own dedicated consultant Revalidation support 24/7/365 service - we're available when you need usA fantastic opportunity has become available for a quick-thinking and methodical Band 5 A&E Nurse with recent NHS experience to join the prestigious University Hospitals of Derby and Burton NHS Trust. Working flexible shifts across at the state-of-the-art Royal Derby Hospital and Queens Hospital, Burton, you will be working triage and treating resus patients with skilled efficiency while providing the highest standards of care. Working alongside a friendly, welcoming team of 11,000 dedicated healthcare professionals, you will be using some of the most advanced medical equipment in the country to provide constant monitoring and care for patients in a seriously ill or unstable condition. The Trust is highly regarded for its facilities, teaching and research. So, as a member of the A&E nursing team, you will have access to a wide range of development and support packages to ensure you are progressing your skills and your career at every opportunity. General key skills In addition to your qualifications, as a Band 5 A&E Nurse, you will have: quick thinking abilities patience and the ability to remain calm in stressful situations excellent attention to detail a methodical approach to tasks excellent timekeeping the ability to work well and under pressure empathy and understanding a flexible attitude a desire to learn and improve active listening skills the ability to use a computer competentlyMain Duties/Responsibilities As a Band 5 A&E Nurse with University hospitals Derby and Burton NHS Trust, you will: Provide constant monitoring and care for patients in a seriously ill or unstable condition. Actively supporting emergency admissions and their families, communicating clinical information using a variety of methods, to ensure effective understanding. Assess and prioritise patient/client requirements, delegating effectively to others. To recognise, review and report patients/clients' condition and any changes to it to senior members of staff within the multidisciplinary team. Responsible for adhering to the NMC professional Code of Conduct. Taking blood/fitting a canula, undertake patient observations (blood pressure, temperature, pulse, respiration rate and oxygen level) as patient need dictates throughout the shift. Treatment of resus patients and TriageQualifications/Licenses/Certifications Essential Be a registered nurse. At least 2 years post-graduate experience. 6 months recent NHS experience within the last 3 years. You will need to pass an enhanced background check. So, if you can combine empathy and understanding with fast-paced critical care, we want to hear from you. Apply today. please contact Natalie Wakeling on (phone number removed) or (url removed)

Procurement Team Lead / Senior Buyer We are recruiting for our very well-established client who supply specialist automotive products. They are looking for an experienced Procurement Team Lead / Senior Buyer / Supply Chain professional to manage procurement and supply chain operations within a growing technical product business. This is a hands-on role suited to an experienced procurement, purchasing or supply chain professional who enjoys improving processes, managing suppliers and driving supply chain efficiency. The role will particularly suit candidates with experience purchasing technical products, engineering components, MRO supplies, automotive aftermarket or manufacturing products where managing multiple components and suppliers is essential. You will work with suppliers across the UK, Europe and the Far East, helping to optimise purchasing activity, stock levels and supplier performance. This is a great opportunity for a career focused Procurement professional that wants to further develop and build a career in a proactive supportive company. Location - Nottingham Salary - Up to £40,000 basic + 23 days base annual leave (plus bank holidays 30 days total + paid sick leave + Pension + High street & online instant discounts scheme + Employee assistance program + Recently renovated modern office space + Holiday Purchase & Sale policy Key Responsibilities Manage day-to-day procurement and purchasing activity Review and manage purchase orders and supplier performance Build strong relationships with UK and international suppliers Support supplier sourcing and new product introductions (NPI) Use ERP and forecasting systems (Business Central, Netstock or similar) Identify opportunities for cost reduction and supply chain improvementsSkills & Experience Experience in procurement, purchasing, buying or supply chain Strong supplier management and commercial awareness Experience managing technical products or multi-component supply chains Good analytical, organisational and IT skills Experience using ERP / supply planning systems Desirable: Overseas sourcing experience, particularly China / Far East suppliers.The Next Step: To register your interest for this Procurement Lead role in confidence please forward your CV to Robert Cox at Glen Callum Associates Ltd on or call (phone number removed) Job Ref: 4332RC Procurement Lead Glen Callum Associates is committed to creating diverse and inclusive workplaces. We welcome applications from all qualified candidates regardless of gender, age, ethnicity, disability, sexual orientation, or background. We believe that a variety of perspectives makes a team stronger and a workplace better. If you need any adjustments during the recruitment process, please let us know - we're here to support you

Procurement Team Lead / Senior Buyer We are recruiting for our very well-established client who supply specialist automotive products. They are looking for an experienced Procurement Team Lead / Senior Buyer / Supply Chain professional to manage procurement and supply chain operations within a growing technical product business. This is a hands-on role suited to an experienced procurement, purchasing or supply chain professional who enjoys improving processes, managing suppliers and driving supply chain efficiency. The role will particularly suit candidates with experience purchasing technical products, engineering components, MRO supplies, automotive aftermarket or manufacturing products where managing multiple components and suppliers is essential. You will work with suppliers across the UK, Europe and the Far East, helping to optimise purchasing activity, stock levels and supplier performance. This is a great opportunity for a career focused Procurement professional that wants to further develop and build a career in a proactive supportive company. Location - Nottingham Salary - Up to £40,000 basic + 23 days base annual leave (plus bank holidays 30 days total + paid sick leave + Pension + High street & online instant discounts scheme + Employee assistance program + Recently renovated modern office space + Holiday Purchase & Sale policy Key Responsibilities • Manage day-to-day procurement and purchasing activity * Review and manage purchase orders and supplier performance * Build strong relationships with UK and international suppliers * Support supplier sourcing and new product introductions (NPI) * Use ERP and forecasting systems (Business Central, Netstock or similar) * Identify opportunities for cost reduction and supply chain improvements Skills & Experience • Experience in procurement, purchasing, buying or supply chain * Strong supplier management and commercial awareness * Experience managing technical products or multi-component supply chains * Good analytical, organisational and IT skills * Experience using ERP / supply planning systems * Desirable: Overseas sourcing experience, particularly China / Far East suppliers. The Next Step: Job Ref: 4332RC Procurement Lead Glen Callum Associates is committed to creating diverse and inclusive workplaces. We welcome applications from all qualified candidates regardless of gender, age, ethnicity, disability, sexual orientation, or background. We believe that a variety of perspectives makes a team stronger and a workplace better. If you need any adjustments during the recruitment process, please let us know - we're here to support you.

A flexible opportunity that works around you whether you're looking for Full or Part-Time. Imagine working for yourself, close to home, at your pace, around your lifestyle and commitments. Our network of over 1200 local Advisors enjoy these benefits, alongside great earnings. Hillarys, established over 50 years ago, remains the UK's leading provider of window furnishings solutions with an annual turnover of £250m. We're still enjoying strong growth and looking for more Advisors to join our team. Our Advisors visit customers at home to advise on and measure for a wide range of products solutions. Once manufactured and delivered, they return to install for a beautiful finish every time. If this is unlike anything you've done before that's ok – most of our self-employed Advisors started from the same position and have gone on to run successful Hillarys businesses for many years with our support – we are the experts after all. If you have a great personality, are approachable, a good communicator and care about great Service, you're already halfway there. We make it easy to find out more so why not join us on a virtual Discovery Session and learn everything you need to know about being a Hillarys Advisor. You can ask a current Advisor and one of our Area Managers any relevant questions – all from the comfort of your armchair with zero commitment! Work for yourself, not by yourself : the benefits of your own local business, within a model that removes the worries: We're experts in advertising so you won't worry about finding customers Have the confidence that over 70% of customers go on to purchase from their Hillarys Advisor You can focus on outstanding Service, ensuring your customers buy, and come back time and again Flexible hours to suit your lifestyle: manage your own diary and the time you want to commit There's a reason that so many Hillarys Advisors are successful. We're just as committed as you to the partnership – that starts with a comprehensive package: Training-for-life, local business support, a plan that's built around you, and all the things you'll need to ensure a professional approach and finish from day one: All the professional and practical Training you'll ever need as you start and develop your business. Comprehensive Sales Toolkit including complete Product samples, Tablet and software Full Installation Toolkit, including all measuring equipment, and tools (including power tools) A professional image – Hillarys branded clothing, and personalised business cards & leaflets This is wrapped into a one-off investment of just £2995 and we've even got flexible ways to pay to help spread the investment. This is unquestionably the most simple and effective way to access the UK's best opportunity. On top of the points above, you'll need to hold a valid UK driving licence to get to customers locally. To find out more complete the application form online, join one of our 45-minute Discovery sessions and learn about how good a fit Hillarys could be for you? TPBN1_UKTJ

Job Title: Experienced Conveyancer Location: Derby Hours: Monday - Friday, flexi hours to suit a work life balance - HYBRID We are seeking an experienced Conveyancer to join our growing team in Derby With an excellent reputation in the industry and glowing client reviews to back it up, this is a great opportunity to become part of a respected firm that prioritises client care and staff development. You'll work in a supportive environment under the guidance of the Head of Conveyancing and other partners. Key Responsibilities: Manage a varied caseload of residential sales, purchases, transfers of equity, and re-mortgages. Progress cases in a timely, cost-effective manner, ensuring cases are closed and billed appropriately. Generate fee income in line with agreed targets set by the Head of Conveyancing. Provide professional and friendly client care, attending clients in person and over the phone, offering clear advice on all aspects of conveyancing. Conduct and ensure compliance with identification checks and the firm's Money Laundering Policy, reporting any concerns as required. Maintain and work within the residential conveyancing department's systems and procedures. Keep accurate ledgers and ensure proper file management, including closures and regular updates to the matter list. Assist the Head of Conveyancing with ad hoc reports and specific projects. Oversee staff under your responsibility, identifying and addressing their training and development needs. Handle administrative matters as directed by the partners. Process client and corporate payments, ensuring documentation is managed efficiently.Why Join Us? Generous Holiday Allowance Family-Friendly Policies: Enhanced maternity leave and a dedicated Christmas shutdown period. Comprehensive Benefits: Free legal fees Pension plan Private healthcare Virtual GP services Annual salary review Cashback options And many more!About You: As an experienced Conveyancer, you will be highly organised, with a proven ability to manage a busy caseload. Strong communication skills and the ability to build client relationships are essential. You will be proactive in ensuring compliance and maintaining high standards across all conveyancing matters. Office Angels is an employment agency and business. We are an equal-opportunities employer who puts expertise, energy and enthusiasm into improving everyone's chance of being part of the workplace. We respect and appreciate people of all ethnicities, generations, religious beliefs, sexual orientations, gender identities, abilities and more. By showcasing talents, skills and unique experiences in an inclusive environment, we help individuals thrive. If you require reasonable adjustments at any stage, please let us know and we will be happy to support you. Office Angels acts as an employment agency for permanent recruitment and an employment business for the supply of temporary workers. Office Angels UK is an Equal Opportunities Employer. By applying for this role your details will be submitted to Office Angels. Our Candidate Privacy Information Statement explaining how we will use your information is available on our website

Job Title: Senior Residential Care Worker/Team Leader (Children's Residential Care) Salary: £28,275-£29,250 (£14.50-£15 per hour) + £2000 JOINING BONUS Enhanced overtime of +£2 per hour £40 sleep in rate (up to £4800 per year) Shifts: 2 days on 4 days off About Us: 5ab Care is a provider of children's residential care services, dedicated to providing high-quality care and support to children and young people. Our focus is on creating a nurturing and supportive environment where children can thrive and achieve their full potential. What we offer: JOINING BONUS OF £2000! (*subject to T&C’s) Employee Assistance Programme – 24 hour access to expert advice and compassionate guidance, designed to help you deal with personal and professional problems that could be affecting your home life or work life, health, and general wellbeing Private Healthcare scheme – private GP, dentist and optician cashback, therapies and outpatient, ,giving you fast access to diagnostics and medical treatment should you need it 210 hours annual leave Pension scheme – 3% employer contribution Double pay on shifts over Christmas and New Years Eve Exclusive discounts and deals through Wellbeing Solutions – Cinema, shopping, days out and more! Eyecare vouchers including a full eye care examination and £20 discount off of glasses Cycle to work scheme – value up to £750 Service bonus at 2 years, 5 years and 8 years of service up to £(Apply online only)% training funded by employer (Inc. diplomas Level 3,4 & 5) Free DBS check Blue light card Referral bonus scheme – up to £500 depending on level of role Gifts for birthdays, wedding and new baby – up to £60 A great work/life balance Company social events - these gatherings are a great opportunity to relax, have fun, and connect with colleagues outside of work, strengthening our team spirit throughout the year Team building activities designed to strengthen collaboration and create lasting connections within your team Electric car scheme The Role: We are currently seeking a dedicated and experienced Senior Residential Care Worker or Team Leader to join our team in Derby. As a Team Leader at 5ab Care, you will be responsible for providing leadership and support within our home. You will work closely with the Registered Manager and Deputy Manager to ensure the highest standards of care are maintained at all times. The role requires a compassionate and dedicated individual who is committed to making a positive difference in the lives of children and young people. Key Responsibilities: Provide day-to-day leadership and support to a team of Residential Care Workers. Ensure that the physical, emotional, and social needs of children and young people are met. Develop and maintain positive relationships with children, young people, and their families. Responsibility for safeguarding and promoting individual rights, providing quality care which is free from oppression, and where differences are respected and valued Act as a role model and mentor to our Residential Support Workers, providing guidance and support as required Assist the Registered Manager in the implementation of care plans and risk assessments Ensure that all records and documentation are accurate and up-to-date Requirements: NVQ Level 3 or above in Children and Young People Workforce or equivalent Previous experience working in a residential care setting with children and young people. Leadership and management skills A compassionate and caring approach Flexibility to work shifts, including evenings, weekends, bank holidays and available for ‘on call’ duties if required A full driving license is required for this role If you are passionate about making a positive difference in the lives of children and young people – click apply now! 5ab Care are committed to safeguarding and promoting the welfare of children and young people and expect all staff to share this commitment. All appointments are subject to a satisfactory enhanced DBS check and satisfactory references

My Client is recruiting for a Senior Electrical Design Engineer in the Water Sector We are seeking to strengthen our Engineering Design Team with the appointment of a Senior Electrical Design Engineer, based in Derby with hybrid working available. In this role, you will report to your Line Manager and the Regional Discipline Lead - (Electrical and ICA). You will be responsible for delivering high‑quality Electrical, Instrumentation, Control and Automation (EICA) design services that support the safe, efficient and compliant delivery of projects across the water and wastewater sectors. You will play a key role in mitigating technical, commercial and delivery risks, ensuring that design solutions are robust, buildable, cost‑effective and aligned with both client specifications and contractual requirements. You will lead and coordinate design activities, producing detailed design documentation and drawings in accordance with relevant health and safety legislation, CDM regulations, water‑industry standards, and internal engineering governance arrangements. Key responsibilities will include: Produce Outline and Detailed Electrical, Instrumentation, Control and Automation designs that meet client needs and enable safe, efficient construction and commissioning. Produce and check specifications, schedules, drawings and calculations to a high standard. Ensure designs are completed in accordance with CDM Regulations and industry best practice. Promote the use of standard designs and consistent design principles wherever possible. Deliver design outputs on time and within budget, keeping colleagues informed throughout. Work collaboratively with other disciplines to ensure coordinated, integrated design solutions. Prepare clear and helpful monthly project status reports. Build strong working relationships with construction teams and supply chain partners to support buildability and programme efficiency. Provide accurate estimates and technical insight to support proposal development. Ensure that standard practices are utilised wherever possible. Contribute positively to departmental processes and support continuous improvement activities. Maintain accurate design records and documentation throughout the project lifecycle. Support a culture focused on customer satisfaction and constructive communication. Maintain your own professional development and support the growth of junior team members. Promote safe working practices and ensure all designs reflect health, safety and environmental considerations. Work in a way that minimises waste and supports environmental sustainability. Assist in supervising and developing staff. Assist in ensuring a safe working environment for all staff. Essential: Relevant engineering degree preferred, or HND with substantial design and build experience (substantial suitable design experience). Membership of a relevant professional institution chartered or working towards chartership. Significant experience in Electrical and ICA design and delivery, ideally within the water or wastewater sectors. Proven Ability to develop practical, buildable and efficient design solutions that meet client, project and industry standards. Experience producing and checking a full suite of design deliverables, including specifications, schedules, drawings, calculations and operating philosophies. Ensure designs are completed in accordance with CDM regulations, and are safe to construct, commission, operate and maintain. Competence in rationalising designs and developing economical, well‑integrated plant layouts. Experience reviewing, coordinating and providing technical assurance on subcontractor designs. Ability to manage complex technical information, assess design risks, and communicate implications clearly. Have experience of managing members of staff, in designing relevant discipline aspects of a project, preferably within Water and Wastewater project delivery. Strong understanding of CDM regulations and the ability to ensure designs are safe to construct, commission, operate and maintain. Demonstrated commitment to producing designs that follow client specifications, industry guidance and internal governance requirements Ability to embed standard design practices and utilise common design solutions wherever appropriate. Experience working collaboratively as part of a multidisciplinary engineering team. Ability to build strong working relationships with construction teams and supply chain partners to support buildability, quality and programme efficiency. Proven ability to deliver coordinated design outputs across multiple engineering disciplines. Ability to rationalise designs and produce economic plant layouts. Commitment to ongoing professional development; working toward professional registration (IEng/CEng) is advantageous. Clear, confident and convincing communication skills, with the ability to present technical proposals to a range of stakeholders. Strong IT skills, particularly in Microsoft Office, and confidence in using digital design environments; experience with CDE platforms is beneficial. Flexible, analytical mindset with the ability to process and interpret large volumes of technical information. Broader understanding of related engineering disciplines (mechanical, process, ICA, project management). Full UK driving licence and willingness to travel to project sites and office locations as required.Desirable: Relevant Engineering Master's degree. Chartered Engineer (CEng) Status. Understand the principles of water and sewage treatment. Understanding of water and wastewater treatment principles. Five or more years' water‑industry experience. Experience working within a Common Data Environment (CDE) and digital document control

Registered General Nurse (RGN) Join Nurseplus as a Registered General Nurse – Deliver Exceptional Care Every Day At Nurseplus, we’re more than just a care agency — we’re a community dedicated to excellence in healthcare. As a temporary Registered General Nurse, you’ll provide compassionate, expert care to clients across diverse healthcare settings. With flexible working options, competitive pay, and industry-leading support, you can build a career that works for you. Why Choose Nurseplus? Flexible Work, Your Way: Take control of your schedule with our Workwise app. Choose part-time or full-time hours, days, nights, or weekends to fit your lifestyle. Weekly Pay & Competitive Rates: Earn between £22.41 to £41.47 per hour paid weekly, depending on shift pattern (higher rates apply for nights, weekends, and bank holidays). Make a Real Impact: Provide essential care to a wide range of clients, from administering medications and managing complex care plans to supporting recovery and promoting independence. Free Industry-Leading Training: Access professional development opportunities, including free revalidation support, to enhance your skills and career. Revalidation Support: Benefit from comprehensive internal resources to maintain your NMC registration. · Blue Light Card: Enjoy thousands of high-street and online discounts with eligibility for a Blue Light Card. What You’ll Do As an RGN with Nurseplus, your role will be as rewarding as it is varied. Key responsibilities include: Delivering high-quality nursing care to patients in line with individual care plans. Administering medications and treatments in accordance with NMC guidelines. Monitoring and assessing patient conditions, responding promptly to changes in their needs. Supporting clients with chronic conditions, post-operative care, or rehabilitation programs. Collaborating with multidisciplinary teams to provide holistic, patient-centered care. Ensuring accurate documentation and maintaining care records to the highest standards. What We Need From You A current and unrestricted NMC registration. At least six months of UK-based paid experience. The right to work in the UK. A good standard of English and effective communication skills. Flexibility to travel as required. About Nurseplus At Nurseplus, our mission is to make a positive impact and change lives every day. We are passionate about delivering the highest-quality care that truly makes a difference in the lives of those we support. But our commitment doesn’t stop there – we care just as much for our staff as we do for our clients. By fostering a supportive and inclusive environment, we empower our team to grow, thrive, and make a meaningful contribution to the communities they serve

A growing UK-based organisation with multiple operational sites is looking to recruit a Senior IT Support Engineer to strengthen its internal IT team. The Role: As a Senior IT Support Engineer, you will act as a key escalation point for technical issue.

This exciting IT Asset Coordinator opportunity is being managed by Consortium Professional Recruitment, a trusted recruitment partner. Consortium Professional Recruitment are pleased to be working with our client to recruit an IT Asset Coordinator who will play a central role in ensuring the organis

Working closely with the IT Manager and Area IT, this role manages and contributes to local and global IT projects (including equipment lifecycle, Event and conference IT Support, HQ pilot projects and local tenders such as mobile phones), while ensuring alignment with global IT guidelines, standard

Strong network infrastructure knowledge, including, but not limited to: Sophos SG/XG series firewalls, SonicWall Series firewalls, Ubiquiti Unifi switching and access points, HP Aruba switching. A big focus for us is growing together and we believe that fantastic opportunities for personal growth ar

A leading IT solutions and services provider in the United Kingdom seeks a Head of Professional Services for their growing Cyber division. Candidates should have strong leadership skills, a deep understanding of IT environments, and experience with consulting operations. This is a unique opportunity

As well as a competitive salary, we can offer you a wide range of benefits including 25 days holiday with the opportunity to buy more, an electric car scheme (where applicable), employee recognition schemes, family friendly support, employee benefits and discounts app, employee assistance programmes

We are partnered exclusively with a Leading IT Solutions and Services Provider to find two Heads within their Cyber Security Offerings. Ensure that assurance activities are grounded in a deep understanding of client IT environments, architectures, and operational constraints. Position Assurance as a

This role will cover a number of IT General Control, Application Control and IT Security. I am currently recruiting on behalf of a household name in the insurance industry for a Senior IT Audit role based in Zurich. Proven IT Audit experience, ideally internationally.

If you possess deep IT Professional Services sourcing expertise and are ready to take ownership within a high-profile transformation, please apply without delay. This role requires gravitas, influencing capability and the ability to operate without guard rails. Working closely with programme directo

A recruitment partner is seeking an IT Asset Coordinator to ensure the effective management of technology assets in the UK. This role involves managing the lifecycle of IT hardware and software assets, maintaining asset records, ensuring compliance with licensing agreements, and collaborating across

Working closely with the IT Manager and Area IT, this role manages and contributes to local and global IT projects (including equipment lifecycle, Event and conference IT Support, HQ pilot projects and local tenders such as mobile phones), while ensuring alignment with global IT guidelines, standard

Data literate with the ability to interpret insight in context and translate into action. With over 390 branches nationwide, CEF offers a fantastic opportunity for professionals in the electrical wholesale industry who are looking for a brighter tomorrow!. Hands-on experience supporting organisation

Consortium Professional Recruitment Ltd are a professional level recruitment consultancy specialising in the delivery of high relevance recruitment services on behalf of our clients across the UK. This opportunity will suit a confident 2nd Line Engineer who enjoys troubleshooting complex issues, imp

These roles suit mid- to senior-level professionals who are ready to lead initiatives, influence standards and governance, and progress toward senior leadership pathways such as IT Manager, Lead Engineer, Security Lead, Solutions Architect, Programme Manager, or Head of IT. Security: SIEM, EDR, vuln

You should be: Comfortable supporting business phone systems or willing to learn Able to advise clients and make recommendations at a vCTO level

Opportunity to Earn) is based on a competitive rate per parcel (piece-rate) and is regularly exceeded by couriers once up to speed! Your hourly earnings are driven by volume and efficiency, and with the help of our learning payment, we boost your income in line with an experienced courier to ensure

High attention to detail and a commitment to quality. We're committed to fostering a diverse, equitable, and inclusive workplace, and we encourage applicants of all backgrounds to apply. Flexibility to work bank holidays and school holidays, as required.