Trabajos laser en DunstableCrear alertas

Laser Programmer (Progression into Applications / Technical Support). Are you a Laser Programmer looking to step off the shop floor and become the go-to technical expert for customers, through structured development across machines, software and applications?. This role suits a Laser Programmer who

The role combines engineering expertise with strong communication, ensuring timely fault resolution and compliance with laser safety and regulatory requirements.

Rise Technical Recruitment is seeking a Laser Programmer in Luton, offering progression into applications engineering and technical support.

Proven experience as a Fabricator (not just welding). Strong MIG welding ability (TIG experience highly desirable). Willingness to learn new skills (including laser welding).

Laser Programmer (Progression into Applications / Technical Support). Are you a Laser Programmer looking to step off the shop floor and become the go-to technical expert for customers, through structured development across machines, software and applications?. This role suits a Laser Programmer who

Laser Programmer (Progression into Applications / Technical Support). Are you a Laser Programmer looking to step off the shop floor and become the go-to technical expert for customers, through structured development across machines, software and applications?. This role suits a Laser Programmer who

Role Overview Working in a large team of service engineers, you will provide complex service, repair and installation for clients across England, focusing on 3D Laser/CNC technology. Key to this role will be effective customer care and communication, post work briefings and service reports, and you

MIG and TIG welding (TIG preferred). Getting involved in new technology including handheld laser welding.

Press Brake / Laser Operator (Progression to Applications / Technical Support). You'll learn to support customers through application-led demonstrations, structured training courses, and programming/operator guidance, with the chance to visit blue-chip client sites.

Laser Programmer (Progression into Applications / Technical Support) Circa £36,000 + Company Vehicle + Overtime + Excellent Company Benefits Package Luton, Bedfordshire (Commutable from: Milton Keynes, Bedford, Stevenage, Welwyn Garden City, St Albans, Hemel Hempstead, Dunstable, Leighton Bu

Orion Electrotech in Dunstable is seeking an experienced Fabricator for bespoke metalwork. The role covers the full fabrication process with high-end, visible architectural pieces. You will perform MIG and TIG welding (TIG preferred), read drawings, prepare materials, and deliver neat welds using stainless steel, aluminium and mild steel. Laser welding is part of the tech mix, offering varied projects. #J-18808-Ljbffr

Join to apply for the Head of Group Tax role at TieTalent 1 day ago Be among the first 25 applicants Join to apply for the Head of Group Tax role at TieTalent Join The World's Leading Pizza Delivery Company You already know who we are and what we do! Domino's UK & Ireland is the powerhouse behind our exceptional products. We're innovative, dynamic, and laser-focused on delivering unparalleled service to our franchisees and customers alike. We’re looking for a Group Tax Manager to join our Finance team and lead all aspects of tax compliance and strategy across the business. In this role, you’ll oversee corporation tax, VAT, and employment tax obligations in the UK and Ireland, while identifying opportunities for tax efficiencies and ensuring compliance with evolving legislation. You’ll also play a key role in strategic projects including acquisitions, disposals, and cross-border transactions, working closely with external advisors and internal stakeholders. If you're passionate about tax governance and want to make a real impact across a dynamic, fast-paced organisation, we’d love to hear from you. Success in this role looks like: • Qualified CTA with solid UK Corporate Tax experience, ideally with exposure to VAT and Employment Tax, and practical knowledge of Alphatax., • Strong analytical and planning skills, with the ability to manage multiple tasks, think logically, and adapt flexibly in a fast-paced, evolving environment., • A confident communicator who builds strong relationships across all levels, welcomes feedback, and thrives in a collaborative, non-hierarchical team., • Takes full ownership of responsibilities with energy and drive, continuously seeking ways to improve processes and deliver high-quality outcomes. We operate in a hybrid working environment, meaning you’ll be required to come to our Milton Keynes HQ at least once per week. What’s in it for you: • Competitive salary and performance-based bonuses., • Competitive pension contributions, • Private health and dental care., • Income protection, • Professional development opportunities., • Fun team events and a supportive work environment., • Pizza discount!, • Director, • Full-time, • Accounting/Auditing and Finance, • Technology, Information and Internet Referrals increase your chances of interviewing at TieTalent by 2x Get notified about new Head of Tax jobs in Leighton Buzzard, England, United Kingdom. Newport Pagnell, England, United Kingdom 11 hours ago Milton Keynes, England, United Kingdom 11 hours ago Leighton Buzzard, England, United Kingdom 11 hours ago Newport Pagnell, England, United Kingdom 11 hours ago Newport Pagnell, England, United Kingdom 11 hours ago Leighton Buzzard, England, United Kingdom 11 hours ago Milton Keynes, England, United Kingdom 11 hours ago Milton Keynes, England, United Kingdom 11 hours ago Milton Keynes, England, United Kingdom 11 hours ago Milton Keynes, England, United Kingdom 11 hours ago Leighton Buzzard, England, United Kingdom 11 hours ago Leighton Buzzard, England, United Kingdom 11 hours ago Newport Pagnell, England, United Kingdom 11 hours ago Newport Pagnell, England, United Kingdom 11 hours ago Newport Pagnell, England, United Kingdom 11 hours ago Leighton Buzzard, England, United Kingdom 1 day ago Milton Keynes, England, United Kingdom 1 day ago Milton Keynes, England, United Kingdom 1 day ago Milton Keynes, England, United Kingdom 3 days ago Leighton Buzzard, England, United Kingdom 11 hours ago Newport Pagnell, England, United Kingdom 1 day ago Newport Pagnell, England, United Kingdom 11 hours ago Newport Pagnell, England, United Kingdom 1 day ago Milton Keynes, England, United Kingdom 11 hours ago Milton Keynes, England, United Kingdom 11 hours ago Milton Keynes, England, United Kingdom 2 weeks ago Milton Keynes, England, United Kingdom 3 months ago Milton Keynes, England, United Kingdom 1 week ago Milton Keynes, England, United Kingdom 3 months ago Milton Keynes, England, United Kingdom 1 week ago Northampton, England, United Kingdom £45,000.00-£60,000.00 20 hours ago Milton Keynes, England, United Kingdom 3 weeks ago We’re unlocking community knowledge in a new way. Experts add insights directly into each article, started with the help of AI. #J-18808-Ljbffr

Enterprise Recruitment Ltd is seeking a Service Engineer to support CNC/Laser systems across England. You will join a large team, perform service, repair and installation, and deliver clear service reports while ensuring outstanding customer care. Expect to travel and spend nights away from home as needed. You should have a service background with CNC experience, and qualifications such as NVQ/City & Guilds or a degree; electrical, electronic or electro-mechanical engineering is valued. #J-18808-Ljbffr

Date Posted: 2026-08-26 Country: United Kingdom Location: High Wycombe, Buckinghamshire Position role type: Onsite Contract: Permanent • £: Competitive salary, • Contributory Pension Scheme (up to 10.5% company contribution), • 6 times salary ‘Life Assurance’ with pension, • 25 days holiday (increasing with service) + statutory public holidays, plus opportunity to buy and sell up to 5 days (37hr), • Company bonus scheme (discretionary), • Flexible Benefits scheme with extensive salary sacrifice schemes, including Health Cashplan, Dental, and Cycle to Work amongst others, • Enhanced sick pay, • Enhanced family friendly policies including enhanced maternity, paternity & shared parental leave, • 37hr working week, although hours may vary depending on role, job requirement or site-specific arrangements., • Early 1.30pm finish Friday, start your weekend early!, • Remote, hybrid and site based working opportunities, dependant on your needs and the requirements of the role., • Up to 5 paid days volunteering each year., • Flexible working culture focused on output, with more formal flexible working arrangements on request (assessed subject to role) - please highlight any requests to the Talent Acquisition team. At Raytheon UK, we take immense pride in being a leader in defence and aerospace technology. As an employer, we are dedicated to fuelling innovation, nurturing talent, and fostering a culture of excellence. As a leading defence and aerospace company operating across the United Kingdom, Raytheon UK helps to solve our customers’ toughest challenges. We are a major supplier to the UK government and customers around the globe, providing defence solutions across all domains: land, sea, air, space, and cyberspace. We also provide digital and training transformation solutions to commercial and military customers. With circa 2000 employees and major facilities operating throughout the UK including Broughton (Wales), Livingston and Glenrothes (Scotland), and Harlow, Gloucester, and Manchester (England); we are committed to investing in British careers and technology development. We have been involved in spaceflight since the world first set its eyes on the final frontier, with a Raytheon radar transmitting Neil Armstrong’s famous “One small step for man” message. As Raytheon UK’s Space business continues to grow, we offer considerable expertise in Space Situational Awareness (SSA), Space Domain Awareness (SDA) and Space Surveillance & Tracking (SST), Policy, Risk Management, Orbital Analytics, and Operations The Raytheon NORSS team, are looking for an Orbital Analyst to work within its operational Orbital Analyst team, performing Space Situational Awareness (SSA) and Space Domain Awareness (SDA) duties, to support the safety of civil and commercial satellite operations. Working with both national and international government stakeholders, the Orbital Analyst will be responsible for monitoring UK-licenced objects and critical spacecraft and providing timely technical analysis and outputs to support the decision making of key stakeholders. This role sits within Raytheon UK’s Space & Intelligence, Surveillance, and Reconnaissance (ISR) mission area and will report to the Raytheon NORSS Orbital Analyst Operations Lead. This role involves working at an operational Orbital Analyst centre where day to day duties include but are not limited to; ensuring the safety of UK-licenced and critical spacecraft involved in high-interest events by monitoring, evaluating, and reporting on key space events (such as re-entering objects, collision avoidance activities and fragmentations of objects). This role will also provide the opportunity to develop new astrodynamics software capabilities and analytical tools in support of UK led Space Surveillance and Tracking (SST) programmes. An understanding of astrodynamics and SSA/SST/SDA topics will be required for this role, and the successful candidate will be expected to have programming experience. This role can either be based from RAF High Wycombe or home with the ability to commute to RAF High Wycombe. Additionally, the successful candidate will occasionally need to travel across the UK to support business and customer needs. • As our Orbital Analyst, you will lead and provide technical expertise on Customer programmes, internal Research and Development projects, and contribute to the capture of future opportunities by means of bid-writing and architecting technical solutions in the realm of SDA., • You will be expected to lead and coordinate the development of SDA/SSA tools and capabilities and ensure the implementation of operational processes, procedures and systems., • The successful candidate will lead on defining the technical and security requirements, along with the performance standards necessary to integrate new SDA sensors into the current UK network., • You will be expected to support customers and partner organisations with technical advice related to the continuing evolution of commercial and government SDA capabilities including infrastructure, software and human assets., • This role will present the opportunity to support a variety of customers in the UK space industry and wider organisations in technical engagement with global partners and institutions in respect to SDA., • Relevant experience in the space industry focused on Space Surveillance and Tracking (SST), Space Situational Awareness (SSA) and/or space systems with an understanding of Space Weather, SSA and SST modelling and analysis., • Understanding of software development lifecycles, workflow procedures and architectures to design, develop, test and validate bespoke SSA tools for both internal and external projects., • Excellent communication skills (written and oral), to articulate and communicate technical detail clearly and concisely with colleagues, customers and partner organisations at all levels. Able to prepare detailed reports and present where necessary., • Able to work effectively and with initiative both independently and as part of a team in a way that is collaborative and adaptable., • Broad understanding and experience in data analysis and analytical software utilisation., • Experience in the development of automated scripts and/or simple software products., • Effective time management and capable of managing multiple work streams., • Willing and eligible to hold SC security clearance and obtain DV clearance if required., • A bachelor’s degree in a relevant field (physics, mathematics, engineering or science)., • Extensive experience in working in the SDA/SSA/SST space domain and expertise in conducting collision avoidance analysis, orbit determination, fragmentation and re-entry analysis in an operational setting., • Demonstrable technical expertise in the technical capability and tasking of sensors providing data to support operational collision avoidance, orbit determination, fragmentation and re-entry analysis across all orbital regimes. Expertise should include demonstrable experience of radar, optical and laser ranging systems., • Technical understanding of the end-to-end chain of ground-based and space-based SST sensor development., • Confident in providing technical demonstrations of capabilities to both internal and external parties., • Capable of leading a team effectively and professionally to deliver results., • A strong understanding of celestial mechanics, astrodynamics and atmospheric physics., • Skilled in one or more of the following programming languages: Fortran, C/C++, Java, Matlab, Python, SQL, Java-script. Experienced in the development and utilisation of SST/SSA related computer simulations. RTX adheres to the principles of equal employment. All qualified applications will be given careful consideration without regard to ethnicity, color, religion, gender, sexual orientation or identity, national origin, age, disability, protected veteran status or any other characteristic protected by law. RTX adheres to the principles of equal employment. All qualified applications will be given careful consideration without regard to ethnicity, color, religion, gender, sexual orientation or identity, national origin, age, disability, protected veteran status or any other characteristic protected by law. Click on this link to read the Policy and Terms #J-18808-Ljbffr

Luton in Bedfordshire - £300 to £340 Day Rate - Immediate Start My Client is seeking a Strong Civils Site Engineer to work on a Groundwork Project There is a lot of work going on here and this could be an ongoing requirement Worked involved in Piling, Groundworks, Drainage, Ducting, Pile Caps, Columns, Decking, Slabs and Pre Cast Elements also. The Engineer will need to be strong ideally someone who has worked with RC Frame contractors previously and can do QA. Groundworks and RC project in the Luton area. The candidate must: • Have Previous experience working on Groundwork's & RC projects on groundworks, Ducting, Drainage and RC Frames., • Must have excellent Knowledge of, Laser Levels, Total Stations and GPS's., • Monitoring, manage, distribute project information to site team and ensure accurate setting out and dimensional control is being carried out., • Ensure the works are constructed to latest design and agreed Specification., • Ensure Project QA is being carried out and site diary is maintained., • Must be competent in Auto Cad, reading drawings and quantifying materials., • Carry out ITP's, KPI's, RFI's, etc., • Have excellent communication skills and in distributing project information to work colleagues., • Have excellent problem-solving capabilities and be able to raise any potential issues. #J-18808-Ljbffr

OneWay Recruit seeks a Site Engineer - Civils for a Groundwork project in the Luton area. Immediate start, Day rate £300 to £340. The role requires strong experience in Groundworks and RC Frames, QA compliance, and setting out using Laser Levels, Total Stations, and GPS devices. Ideal candidates will have AutoCAD proficiency, the ability to read drawings, quantify materials, and manage on-site information flow to the team. Ongoing civil works exposure is beneficial. #J-18808-Ljbffr

Instinctive Ltd is a specialist provider of high-performance medical laser and energy-based systems for the ophthalmic and aesthetic sectors throughout the UK and Ireland. We partner with leading global manufacturers and pride ourselves on delivering exceptional technical support, service excellence, and customer satisfaction. As our business continues to grow, we are seeking an experienced Product Support Engineer to become the technical backbone of our service operation, supporting both our field engineering team and customer service department The Product Support Engineer will act as the central technical resource within the organisation, providing advanced troubleshooting, technical guidance, manufacturer liaison, and operational support. This role combines practical engineering knowledge with strong communication and organisational skills. The successful candidate will support field engineers with technical escalations, assist the customer service team with service reports and technical documentation, manage manufacturer case activity, and oversee workshop facilities, calibration programmes, tooling, and engineering resources. This is an excellent opportunity for an engineer looking to leverage their technical expertise in a less travel-intensive role while remaining closely involved with cutting-edge medical technology. • Provide second-line technical support to field service engineers, • Assist engineers with fault diagnosis, troubleshooting, and repair strategies, • Review technical findings and recommend corrective actions, • Escalate complex cases to manufacturing partners where required, • Manage technical support cases through to resolution, • Maintain accurate technical records and service documentation, • Develop and maintain internal technical knowledge bases, • Review and validate service reports before customer release, • Assist customer service teams with technical queries and responses, • Support preparation of quotations for repairs, upgrades, and technical modifications, • Help produce customer-facing technical reports and recommendations, • Ensure documentation complies with manufacturer and regulatory requirements, • Act as the primary technical point of contact for manufacturing partners, • Manage warranty claims and technical escalations, • Communicate product updates, service bulletins, field actions, and software releases to internal teams, • Participate in manufacturer technical review meetings and training programmes, • Monitor product performance trends and communicate findings internally, • Manage workshop tooling, test equipment, and service assets, • Maintain calibration schedules and service records for all test equipment, • Coordinate repair and maintenance of workshop equipment, • Ensure availability of engineering tools, consumables, and spare parts, • Support fleet test equipment management and deployment, • Maintain workshop organisation, safety, and operational readiness, • Assist with service process improvements and quality initiatives, • Support new product introductions and service readiness activities, • Coordinate engineering training requirements, • Monitor engineering resource requirements and equipment availability, • Support compliance with laser safety, quality, and regulatory requirements, • HNC/HND, Degree, or equivalent qualification in:, • Electronic Engineering, • Electrical Engineering, • Biomedical Engineering, • Medical Engineering, • Strong electronic fault-finding and diagnostic skills, • Experience reading schematics and technical documentation, • Understanding of medical device servicing and maintenance, • Knowledge of calibration principles and test equipment, • Proficiency with PC-based diagnostics and technical software, • Minimum 3 years' experience in a technical engineering role, • Experience supporting field service activities, • Experience working with capital medical equipment or complex electronic systems, • Knowledge of regulated environments and quality procedures, • Medical laser experience, • Laser safety training, • Optical systems experience, • Experience supporting aesthetic or ophthalmic technologies, • Previous manufacturer liaison experience, • Experience with CRM/FSM systems and service management software, • Advanced troubleshooting and diagnostic ability, • Strong customer focus and professionalism, • Effective written and verbal communication, • Ability to manage multiple technical cases simultaneously, • Organised and detail-oriented approach, • Strong problem-solving mindset, • Collaborative team player, • Ownership and accountability JBRP1_UKTJ #J-18808-Ljbffr

Are you a driven, passionate leader who can create a fun environment for our customers and team while meeting company objectives? We have something fun for all the family to do, regardless of age. Our centres are fantastic places to visit, and even better places to work in. Why not come and help us entertain? We love to entertain—it's in our DNA! Beyond bowling, we offer Houdini’s Escape Rooms, Karaoke, a 4D Laser Arena, Soft Play, Arcade Machines, Pool Tables, licensed bars with cocktails, and a fabulous food menu. As a Deputy Manager at Tenpin, you'll ensure our customers have a great time and create a fun environment for both them and our team. You'll support the General Manager with daily operations, team development, and driving sales and profits. Your duties include: • Manage daily operations of the centre, • Create a customer-focused culture, • Lead the team by example for effective collaboration, • Deputise for the General Manager, and support in achieving targets and KPIs, • Ensure compliance with policies and procedures., • Minimum 1 year of management experience in leisure, hospitality or retail, • Passionate about exceptional customer service, • Have experience in leading and developing large teams, • Determined, enthusiastic and patient, • Ambitious and eager to progress, • Industry-leading bonus scheme, • 33 days holiday (including Bank Holidays), • Enhanced Maternity, Paternity, Adoption leave, • Tenpin Treats – Retailer discounts and Best Doctors, • Free Bowling for family & friends, • Free Food (when working 6+ hours), • Medicash, • Employee Assistance Programme, • Free counselling, • Life assurance (4x annual salary), • Birthday off, • Long Service Awards Looking for career development? Tenpin is the place to start. We value great people and offer opportunities for advancement, with many of our managers having started as Team Members. #J-18808-Ljbffr

Rise Technical Recruitment Limited in Luton is seeking a Laser Programmer with progression into applications/technical support. The role involves delivering technical demos on CNC laser and punch press systems and providing pre- and post-sales applications support.

In this role, you will be responsible for running and programming punch and laser machinery within a busy engineering environment based in Luton. We are looking for someone with experience in programming and operating punch and laser machines, ideally within a similar engineering sector. Experience

TRS Consulting is seeking a Sales Account Manager for Medical Ophthalmic LaserSystems in the United Kingdom.

An amazing opportunity has arisen for a Lasers, Optical Engineering or Physics graduate or someone who has two plus years of industry experience, and a keen interest and passion for Lasers and Optical Engineering technology. Some knowledge of the following - Laser micro-machining - Integration and t

Matchtech is staffing a Weapon System Equipment Project Engineer to support DragonFire, a laser directed energy weapon programme. The role focuses on acceptance, delivery, final assembly, integration and testing of the Laser Source sub-system within a demanding defence environment.

Mars in Didcot is seeking a Laser Applications Engineer with a degree in Lasers/Optical Engineering or Physics, or with two years of industry experience. You will develop laser micromachining processes for customers and run production work on our state-of-the-art laser systems.

Enterprise Recruitment Ltd in the United Kingdom is seeking a proactive mechanical engineer to design precision mechanical and opto-mechanical components for high-performance laser systems.

Ferrovial Agroman SA is seeking a Senior Surveying Engineer to lead surveying efforts at Heathrow Airport.You will act as the technical authority, ensuring accuracy and safety in surveying activities across multiple projects.Ideal candidates have expertise in modern surveying instruments and strong

Enterprise Recruitment Ltd is seeking a candidate to run and program punch and laser machinery in a busy engineering environment in Luton. The role requires experience programming punch and laser machines, with a minimum of 3 years in an engineering setting.

Edison Smart is seeking a Graduate Laser Applications Engineer for a client leading in specialised machinery. The role is hands-on and lab-based, ideal for a candidate with a strong physics background and a keen interest in laser optics.

Enterprise Recruitment Ltd is seeking a Service Engineer specialized in CNC and Laser, able to travel across England. Ideal candidates have CNC/laser experience, NVQ/City & Guilds or degree, and an electrical/electro-mechanical background with strong customer-facing skills.

You will undergo medical laser system repair training, support field engineers, and assist customers with remote fault diagnosis while building client relationships. The role includes a structured development plan aimed at progressing to lead engineer or management positions as you gain expertise in

Citrus Recruit recruits on behalf of a well-established employer seeking a Business Development Manager to drive growth of an exclusive laser cutting/welding and cleaning product in the UK.

You will set out works with GPS, laser levels, and robotic EDM, manage QA documents, read drawings, and liaise with site teams.

TipTopJob in the United Kingdom seeks an experienced Sales Engineer with a proven background selling laser machinery or laser cutting systems.

Sales Account Manager, Medical Ophthalmic LaserSystems. The Role - Sales Account Manager, Medical Ophthalmic LaserSystems. Your Background - Sales Account Manager, Medical Ophthalmic LaserSystems.

The role covers a broad range of surveys including topographic, underground utilities, and 3D laser scanning, with CAD output and data processing at the office.

Experienced CNC Laser Setter Operator needed for a sheet metal manufacturer in Leicester. Responsibilities include operating Trumpf laser machines, reading drawings, and quality checking.

Laser Systems Engineer to support quantum platform operations, lead UK laser support, maintain/upgrade Class 4 laser systems, and ensure global fleet continuity.

Field Service Engineer needed to install, service, and repair advanced CNC laser machines for customers across the UK.

Laser Programmer role in Nottinghamshire, offering up to £33,500 salary and a 4.

Role: Inspector - Laser Crack Detection (Day Shift).

Operating a Bystronic Laser, working from engineering drawings.

Experienced Tube Laser Operator wanted for a leading engineering company in Darwen, Lancashire. Responsibilities include operating CNC Lasers and setting standards.

Were looking for an experienced CNC Laser Operator to join a friendly, supportive team xohmjla working with modern CNC manufacturing machinery.

Laser Expertise is looking for an experienced and reliable Assembly Team Leader to lead our busy Assembly department.

ACTUAL CLOSING DATE: Applications must be received by Tuesday 6 October 2026 at 11:55pm.Please ensure that you read the full advert text and do not submit a CV, as these will be disregarded as they do not form part of SLC application process.If you require to submit additional information to suppor

Closing Date: Thursday 31st December 2026.We would love to welcome Cleaners to join our friendly team in working for Argyll and Bute, one of Scotland’s most stunning areas.Let us tell you about why this could be a great move for you.Argyll and Bute is one of Scotland’s most stunning areas.As its

Assist with the delivery of a clean and safe user environment within various premises across East Ayrshire in order to assist with the promotion, delivery and integration of the Council’s key objectives; specifically in relation to the Community Plan, Shared Commitments, Single Outcome Agreement a

Job Profile for CNC Miller 46816 CNC Miller / Setter / Operator Hemel Hempstead Permanent Position An established and highly respected precision engineering business based in Hemel Hempstead is currently looking to recruit an experienced CNC Miller / Setter / Operator to join their growing team.The