Lighting engineer jobs in CardiffCreate job alerts

Electrical QA Resident Engineer - Cardiff - 1 year ++ contract Role Overview We are seeking an experienced Electrical QA Resident Engineer to provide independent and structured technical quality assurance across the electrical building services installations for a prestigious project in Cardiff. The role will provide progressive inspection and technical review throughout the construction period, with the objective of identifying non-conforming works, workmanship issues and departures from the approved project requirements at the earliest practical opportunity. The Electrical QA Resident Engineer will act as an important link between the design, quality and construction teams, ensuring that the installed electrical services reflect the approved design intent, Employer's Requirements, project specifications, technical submissions, benchmarks and applicable standards. This is a design and technically focused QA role, rather than a purely inspection or snagging position. The successful candidate must be capable of reading and understanding electrical design specifications, drawings and technical submissions and applying that knowledge when assessing installations on site. The project QA period is anticipated to run from Q3 2026 through Q2/Q3 2028, subject to the development of the project programme. Key Responsibilities Design & Technical Assurance • Review and interpret electrical design specifications, Employer's Requirements, drawings, schedules and approved construction information. • Review electrical design information and understand the intended performance and installation requirements of the systems. • Assess installed works against the latest approved construction information available within the project document management system. • Review approved technical submissions, equipment data, manufacturers' requirements and material approvals. • Verify that approved materials and equipment are being installed and that installations generally reflect the approved technical submissions. • Review benchmark installations and sample areas against the Employer's Requirements and project specifications. • Confirm alignment between approved benchmarks, specifications, drawings, technical submissions and installed works. • Identify discrepancies, omissions, non-conformances and potential quality issues at an early stage. • Provide technically informed input where installation issues arise and liaise with the design and project teams where clarification is required. • Identify issues which may affect subsequent testing, commissioning, completion or handover. • Review electrical design coordination with mechanical, public health, architectural and structural elements. Electrical Installation QA Carry out progressive site inspections of electrical building services installations, including, as applicable: • LV distribution systems • Main and sub-main distribution • Distribution boards and switchgear • Small power installations • Lighting and emergency lighting • Containment systems, including cable tray, trunking, conduit and associated supports • LV cabling and wiring systems • Earthing and bonding • Electrical plant and equipment supplies • Generator and standby power systems • UPS systems • Life safety and essential power systems • Fire alarm electrical installations and interfaces • Access control and security system interfaces • Data and containment infrastructure • BMS and controls interfaces • Specialist electrical systems • External electrical installations and associated infrastructure Inspections shall include consideration of: • Workmanship and installation quality • Compliance with approved drawings and specifications • Correct materials and equipment • Containment, supports, brackets, fixings and secondary steelwork • Cable installation, routing, segregation and identification • Terminations and connections • Equipment installation and manufacturer requirements • Accessibility and maintainability • Service identification and labelling • Earthing and bonding • Coordination with other MEP services • Fire-stopping associated with electrical penetrations • Protection of completed installations • Cleanliness and protection of electrical equipment • Readiness for testing and commissioning Progressive Inspection & Quality Control • Review Inspection and Test Plans (ITPs) and associated quality checklists within the system for completeness and compliance. • Undertake progressive inspections at appropriate stages of construction. • Inspect installations before concealment, including prior to closure of: o Ceilings o Walls o Risers o Shafts o Builders' work openings o Plantrooms o Electrical rooms o Other restricted-access areas • Identify defects and non-conforming works before they become inaccessible. • Raise and record Quality System Observations (QSOs), snagging items and other quality observations. • Establish appropriate target close-out dates and monitor progress. • Re-inspect completed works following notification from subcontractors that items are ready for inspection. • Verify close-out based on physical re-inspection and supporting evidence, rather than relying solely on subcontractor confirmation. • Provide photographic evidence and supporting records for inspections and close-out activities. • Verify that approved workmanship standards and benchmarks continue to be maintained throughout the project. Equipment & Material Verification • Review technical submittals and supporting documentation against ITP requirements and installed equipment. • Verify that approved materials, equipment and products are being installed. • Review manufacturers' installation requirements for major electrical equipment. • Confirm through site inspection that equipment has generally been installed in accordance with approved manufacturer requirements. • Verify specialist installation requirements including: o Equipment positioning o Alignment o Level and mounting o Cable entry o Terminations o Equipment clearances o Ventilation requirements o Access requirements o Maintenance requirements • Verify appropriate labelling and identification of electrical equipment, distribution boards, circuits and systems. • Verify circuit and equipment identification against approved drawings and schedules. • Check that electrical equipment and installations are suitably protected from damage, contamination and deterioration during construction. Coordination & Maintainability • Review electrical installations for appropriate coordination, accessibility and maintainability. • Confirm access is available to maintainable components including: o Distribution boards o Switchgear o Isolators o Control equipment o Lighting equipment o Emergency lighting o Electrical plant o BMS interfaces o Other maintainable components • Identify issues where services have been installed in a manner that may restrict access, maintenance or future operation. • Identify coordination issues with mechanical, public health, architectural and structural services. • Review containment routes and service coordination to ensure appropriate access and installation quality. • Identify potential issues relating to cable segregation, service clearances and accessibility. • Attend relevant MEP coordination, quality and subcontractor meetings where technical quality issues require review or resolution. Testing & Commissioning • Review electrical testing and commissioning requirements against the approved design and project specifications. • Monitor the quality and completeness of electrical testing and inspection activities. • Review relevant testing documentation and records. • Verify that testing has been undertaken in accordance with approved procedures and applicable requirements. • Identify incomplete or unacceptable testing records. • Monitor outstanding testing issues which could affect commissioning or handover. • Provide QA input into the progressive completion and commissioning of electrical systems. • Review electrical installation quality prior to energisation where appropriate. Quality Management & Reporting • Maintain an accurate and auditable record of electrical QA activities. • Maintain the electrical QA dashboard/tracker, recording: o Inspections undertaken o Open QSOs o Snagging items o Overdue actions o Closed items o Recurring defects o Trends by subcontractor o Trends by system o Trends by area • Monitor recurring defects and workmanship trends. • Identify repeated non-conformances and report areas requiring corrective action or additional quality controls. • Provide regular photographic records of inspections, defects and close-out. • Prepare regular monthly electrical QA reports summarising: o Inspections completed o Key quality concerns o Recurring defects o Outstanding QSOs o Ageing of open actions o Overdue items o Areas of concern o Risks to completion, testing, commissioning or handover • Provide timely escalation of significant quality concerns to the client. Client & Employer Inspections • Prepare a rolling two-week look-ahead programme of planned client inspections. • Coordinate client and Employer inspections with the relevant project teams and subcontractors. • Prepare inspection reports identifying observations, defects and required actions. • Coordinate inspection invitations and maintain evidence that the client/Employer was provided with the opportunity to attend. • Obtain attendance/sign-off records where required. • Maintain all relevant supporting correspondence and inspection records. • Attend and facilitate weekly site quality meetings, providing updates on: o Electrical inspections o QSOs o Defect status o Inspection progress o Outstanding and overdue actions o Client inspection sign-offs o Recurring quality issues o Risks to subsequent works o Testing and commissioning o Completion and handover Progressive Handover • Support the progressive handover of the electrical installations. • Review outstanding electrical defects and QSOs. • Re-inspect items reported as complete and verify satisfactory close-out. • Confirm that quality records are complete and auditable. • Identify outstanding issues which may present a risk to testing, commissioning, completion or handover. • Support the project team in achieving progressive completion rather than allowing quality issues to accumulate towards the end of the project. Technical Requirements The successful candidate must be able to demonstrate a strong understanding of electrical building services design and installation. They should be able to: • Read and interpret detailed electrical design drawings. • Read and understand electrical design specifications and Employer's Requirements. • Understand electrical design intent and assess whether the physical installation reflects that intent. • Review technical submissions and manufacturers' information. • Identify discrepancies between drawings, specifications, technical submissions and installed works. • Understand LV distribution and electrical building-services systems. • Understand containment systems and cable installation requirements. • Review electrical equipment, switchgear and distribution systems. • Understand lighting, emergency lighting and small power installations. • Understand earthing and bonding requirements. • Understand electrical coordination with mechanical and public health systems. • Review electrical plantroom and electrical room installations. • Assess accessibility and maintainability of electrical installations. • Identify potential issues before systems become concealed or inaccessible. • Understand requirements for electrical inspection, testing, commissioning and handover. • Identify installation issues which could adversely affect testing, energisation or system performance. • Demonstrate sound engineering judgement when assessing quality issues. Experience & Qualifications Essential • Degree, HNC/HND or equivalent qualification in Electrical Engineering, Building Services Engineering or a related discipline. • Significant experience in electrical building services. • Previous experience in either: o Electrical Design Engineering; or o Electrical QA/QC Engineering or Management with strong technical/design experience. • Proven experience reviewing electrical drawings, specifications and technical submissions. • Strong understanding of electrical building-services installation. • Experience working on major construction projects. • Experience with progressive inspection and quality assurance. • Experience raising and managing quality observations, defects or NCRs through to close-out. • Strong understanding of ITPs and inspection processes. • Ability to work independently and provide objective technical assurance. • Strong communication and reporting skills. • Excellent IT literacy. Desirable • Experience on large-scale commercial, hospitality, entertainment or mixed-use developments. • Previous experience on an arena, stadium, hotel or complex public building project. • Experience with complex LV distribution and electrical infrastructure. • Experience with generators, UPS systems and essential/standby power. • Experience with life safety systems and associated electrical interfaces. • Experience with testing and commissioning processes. • Knowledge of relevant British Standards, BS 7671, CIBSE guidance and applicable legislation. • Experience using a digital construction/quality management platforms. • Experience with BIM and digital coordination platforms. • Working knowledge of AutoCAD, Revit, Navisworks or similar software. • Relevant QA/QC or quality management qualifications. • Chartered or Incorporated Engineer status, or working towards professional registration. IT & Digital Competence The role requires a high level of IT and digital competence. The successful candidate should be comfortable working within a digital construction environment and using: • Microsoft Word • Microsoft Excel • Microsoft Outlook • PDF/drawing review software • Digital document management systems • Common Data Environments (CDEs) • BIM/3D coordination platforms Experience with AutoCAD, Revit and/or Navisworks would be advantageous. The candidate must be able to maintain accurate digital records and produce clear, professional reports and trackers. Candidate Profile The successful candidate will be a technically competent electrical engineer who can operate confidently between design documentation, site inspection and quality management. We are particularly interested in candidates from one of two backgrounds: Electrical Design Engineer An electrical design engineer who has moved into, or has an interest in, technical assurance and site-based quality, and who can apply their understanding of design intent to construction. Electrical QA/QC Engin

Multi Skilled Maintenance Engineer required!! Facilities management / commercial buildings Cardiff - St Mellons 3 days per week static and 2 days a week mobile across commercial properties within south Wales £40k depending on experience/ qualifications Overtime opportunities available Great benefits 25 days holiday On-call and overtime available Are you a Multi Skilled M&E Maintenance Engineer working on commercial properties and open to a new role, it maybe for more money (given the cost of living) or maybe for better terms or work life balance. Thrive SW are currently recruiting for a Client that have a new contract starting in December, the role will be covering a large business park (3 buildings) 3 days per week, with 2 days per week working mobile across multi tenanted offices within South Wales. You will need to be qualified either Electrically (NVQ level3 & AM2) or Mechanically (plumbing, HVAC) with a good understanding of planned and reactive works to a commercial building, experience of statutory compliance, electrical lighting and power, plant rooms / HVAC / ahu's as well as basic fabric duties such as plumbing and carpentry. We also have a number of roles for Electricians, Air Conditioning Engineers, Gas Engineers and Fabric Engineers. If you want to hear of the current opportunities in and around Bristol then please apply now or reach out to Gary Cornes (20 years experience in FM and maintenance engineering recruitment) if we've not got the right role now, we can keep you posted on opportunities as and when they come in

Senior EC&I Engineer Location: Cardiff Contract Type: Permanent Salary: £70,000 + Bonus + Private Medical + Pension + Strong Benefits Package Key Responsibilities Take full technical ownership of the site's electrical and instrumentation assets, from 11kV down to LV and instrumentation. Maintain and update electrical standards, drawings, and procedures to ensure compliance. Act as permit issuer for HV work and electrical approver for excavations. Lead DSEAR and ATEX compliance across the site. Support the leadership and development of the E&I technician team. Manage E&I maintenance and shutdown budgets alongside engineering leadership. Drive reliability improvements and asset life-cycle strategies. Project manage smaller capital upgrades and support larger projects. Approve, audit, and manage electrical contractors. Support safety-critical systems, including fire, access control, CCTV, and lighting. Requirements Degree or equivalent in Electrical Engineering with significant experience. Background in engineering and maintenance within a process or related industry. Strong HV/LV experience, including transformers, switchrooms, MCCs, and VSDs. Expertise in process instrumentation, fault-finding, and calibration. Knowledge of PLC first-line maintenance and ladder logic. Solid understanding of hazardous area equipment and protection concepts. Experience in process safety, including HAZOP, LOPA, SIL/SIS, and MOC. Capital project experience from design through to commissioning and start-up

Electrical QA Resident Engineer - Cardiff - 1 year ++ contract Role Overview We are seeking an experienced Electrical QA Resident Engineer to provide independent and structured technical quality assurance across the electrical building services installations for a prestigious project in Cardiff.The role will provide progressive inspection and technical review throughout the construction period, with the objective of identifying non-conforming works, workmanship issues and departures from the approved project requirements at the earliest practical opportunity.The Electrical QA Resident Engineer will act as an important link between the design, quality and construction teams, ensuring that the installed electrical services reflect the approved design intent, Employer's Requirements, project specifications, technical submissions, benchmarks and applicable standards.This is a design and technically focused QA role, rather than a purely inspection or snagging position. The successful candidate must be capable of reading and understanding electrical design specifications, drawings and technical submissions and applying that knowledge when assessing installations on site.The project QA period is anticipated to run from Q3 2026 through Q2/Q3 2028, subject to the development of the project programme. Key Responsibilities Design & Technical Assurance•Review and interpret electrical design specifications, Employer's Requirements, drawings, schedules and approved construction information.•Review electrical design information and understand the intended performance and installation requirements of the systems.•Assess installed works against the latest approved construction information available within the project document management system.•Review approved technical submissions, equipment data, manufacturers' requirements and material approvals.•Verify that approved materials and equipment are being installed and that installations generally reflect the approved technical submissions.•Review benchmark installations and sample areas against the Employer's Requirements and project specifications.•Confirm alignment between approved benchmarks, specifications, drawings, technical submissions and installed works.•Identify discrepancies, omissions, non-conformances and potential quality issues at an early stage.•Provide technically informed input where installation issues arise and liaise with the design and project teams where clarification is required.•Identify issues which may affect subsequent testing, commissioning, completion or handover.•Review electrical design coordination with mechanical, public health, architectural and structural elements.Electrical Installation QACarry out progressive site inspections of electrical building services installations, including, as applicable:•LV distribution systems•Main and sub-main distribution•Distribution boards and switchgear•Small power installations•Lighting and emergency lighting•Containment systems, including cable tray, trunking, conduit and associated supports•LV cabling and wiring systems•Earthing and bonding•Electrical plant and equipment supplies•Generator and standby power systems•UPS systems•Life safety and essential power systems•Fire alarm electrical installations and interfaces•Access control and security system interfaces•Data and containment infrastructure•BMS and controls interfaces•Specialist electrical systems•External electrical installations and associated infrastructure Inspections shall include consideration of:•Workmanship and installation quality•Compliance with approved drawings and specifications•Correct materials and equipment•Containment, supports, brackets, fixings and secondary steelwork•Cable installation, routing, segregation and identification•Terminations and connections•Equipment installation and manufacturer requirements•Accessibility and maintainability•Service identification and labelling•Earthing and bonding•Coordination with other MEP services•Fire-stopping associated with electrical penetrations•Protection of completed installations•Cleanliness and protection of electrical equipment•Readiness for testing and commissioning Progressive Inspection & Quality Control•Review Inspection and Test Plans (ITPs) and associated quality checklists within the system for completeness and compliance.•Undertake progressive inspections at appropriate stages of construction.•Inspect installations before concealment, including prior to closure of:oCeilingsoWallsoRisersoShaftsoBuilders' work openingsoPlantroomsoElectrical roomsoOther restricted-access areas•Identify defects and non-conforming works before they become inaccessible.•Raise and record Quality System Observations (QSOs), snagging items and other quality observations.•Establish appropriate target close-out dates and monitor progress.•Re-inspect completed works following notification from subcontractors that items are ready for inspection.•Verify close-out based on physical re-inspection and supporting evidence, rather than relying solely on subcontractor confirmation.•Provide photographic evidence and supporting records for inspections and close-out activities.•Verify that approved workmanship standards and benchmarks continue to be maintained throughout the project. Equipment & Material Verification•Review technical submittals and supporting documentation against ITP requirements and installed equipment.•Verify that approved materials, equipment and products are being installed.•Review manufacturers' installation requirements for major electrical equipment.•Confirm through site inspection that equipment has generally been installed in accordance with approved manufacturer requirements.•Verify specialist installation requirements including:oEquipment positioningoAlignmentoLevel and mountingoCable entryoTerminationsoEquipment clearancesoVentilation requirementsoAccess requirementsoMaintenance requirements•Verify appropriate labelling and identification of electrical equipment, distribution boards, circuits and systems.•Verify circuit and equipment identification against approved drawings and schedules.•Check that electrical equipment and installations are suitably protected from damage, contamination and deterioration during construction. Coordination & Maintainability•Review electrical installations for appropriate coordination, accessibility and maintainability.•Confirm access is available to maintainable components including:oDistribution boardsoSwitchgearoIsolatorsoControl equipmentoLighting equipmentoEmergency lightingoElectrical plantoBMS interfacesoOther maintainable components•Identify issues where services have been installed in a manner that may restrict access, maintenance or future operation.•Identify coordination issues with mechanical, public health, architectural and structural services.•Review containment routes and service coordination to ensure appropriate access and installation quality.•Identify potential issues relating to cable segregation, service clearances and accessibility.•Attend relevant MEP coordination, quality and subcontractor meetings where technical quality issues require review or resolution. Testing & Commissioning•Review electrical testing and commissioning requirements against the approved design and project specifications.•Monitor the quality and completeness of electrical testing and inspection activities.•Review relevant testing documentation and records.•Verify that testing has been undertaken in accordance with approved procedures and applicable requirements.•Identify incomplete or unacceptable testing records.•Monitor outstanding testing issues which could affect commissioning or handover.•Provide QA input into the progressive completion and commissioning of electrical systems.•Review electrical installation quality prior to energisation where appropriate. Quality Management & Reporting•Maintain an accurate and auditable record of electrical QA activities.•Maintain the electrical QA dashboard/tracker, recording:oInspections undertakenoOpen QSOsoSnagging itemsoOverdue actionsoClosed itemsoRecurring defectsoTrends by subcontractoroTrends by systemoTrends by area•Monitor recurring defects and workmanship trends.•Identify repeated non-conformances and report areas requiring corrective action or additional quality controls.•Provide regular photographic records of inspections, defects and close-out.•Prepare regular monthly electrical QA reports summarising:oInspections completedoKey quality concernsoRecurring defectsoOutstanding QSOsoAgeing of open actionsoOverdue itemsoAreas of concernoRisks to completion, testing, commissioning or handover•Provide timely escalation of significant quality concerns to the client. Client & Employer Inspections•Prepare a rolling two-week look-ahead programme of planned client inspections.•Coordinate client and Employer inspections with the relevant project teams and subcontractors.•Prepare inspection reports identifying observations, defects and required actions.•Coordinate inspection invitations and maintain evidence that the client/Employer was provided with the opportunity to attend.•Obtain attendance/sign-off records where required.•Maintain all relevant supporting correspondence and inspection records.•Attend and facilitate weekly site quality meetings, providing updates on:oElectrical inspectionsoQSOsoDefect statusoInspection progressoOutstanding and overdue actionsoClient inspection sign-offsoRecurring quality issuesoRisks to subsequent worksoTesting and commissioningoCompletion and handoverProgressive Handover•Support the progressive handover of the electrical installations.•Review outstanding electrical defects and QSOs.•Re-inspect items reported as complete and verify satisfactory close-out.•Confirm that quality records are complete and auditable.•Identify outstanding issues which may present a risk to testing, commissioning, completion or handover.•Support the project team in achieving progressive completion rather than allowing quality issues to accumulate towards the end of the project.Technical RequirementsThe successful candidate must be able to demonstrate a strong understanding of electrical building services design and installation.They should be able to:•Read and interpret detailed electrical design drawings.•Read and understand electrical design specifications and Employer's Requirements.•Understand electrical design intent and assess whether the physical installation reflects that intent.•Review technical submissions and manufacturers' information.•Identify discrepancies between drawings, specifications, technical submissions and installed works.•Understand LV distribution and electrical building-services systems.•Understand containment systems and cable installation requirements.•Review electrical equipment, switchgear and distribution systems.•Understand lighting, emergency lighting and small power installations.•Understand earthing and bonding requirements.•Understand electrical coordination with mechanical and public health systems.•Review electrical plantroom and electrical room installations.•Assess accessibility and maintainability of electrical installations.•Identify potential issues before systems become concealed or inaccessible.•Understand requirements for electrical inspection, testing, commissioning and handover.•Identify installation issues which could adversely affect testing, energisation or system performance.•Demonstrate sound engineering judgement when assessing quality issues.Experience & QualificationsEssential•Degree, HNC/HND or equivalent qualification in Electrical Engineering, Building Services Engineering or a related discipline.•Significant experience in electrical building services.•Previous experience in either:oElectrical Design Engineering; oroElectrical QA/QC Engineering or Management with strong technical/design experience.•Proven experience reviewing electrical drawings, specifications and technical submissions.•Strong understanding of electrical building-services installation.•Experience working on major construction projects.•Experience with progressive inspection and quality assurance.•Experience raising and managing quality observations, defects or NCRs through to close-out.•Strong understanding of ITPs and inspection processes.•Ability to work independently and provide objective technical assurance.•Strong communication and reporting skills.•Excellent IT literacy.Desirable•Experience on large-scale commercial, hospitality, entertainment or mixed-use developments.•Previous experience on an arena, stadium, hotel or complex public building project.•Experience with complex LV distribution and electrical infrastructure.•Experience with generators, UPS systems and essential/standby power.•Experience with life safety systems and associated electrical interfaces.•Experience with testing and commissioning processes.•Knowledge of relevant British Standards, BS 7671, CIBSE guidance and applicable legislation.•Experience using a digital construction/quality management platforms.•Experience with BIM and digital coordination platforms.•Working knowledge of AutoCAD, Revit, Navisworks or similar software.•Relevant QA/QC or quality management qualifications.•Chartered or Incorporated Engineer status, or working towards professional registration.IT & Digital CompetenceThe role requires a high level of IT and digital competence.The successful candidate should be comfortable working within a digital construction environment and using:•Microsoft Word•Microsoft Excel•Microsoft Outlook•PDF/drawing review software•Digital document management systems•Common Data Environments (CDEs)•BIM/3D coordination platformsExperience with AutoCAD, Revit and/or Navisworks would be advantageous.The candidate must be able to maintain accurate digital records and produce clear, professional reports and trackers.Candidate ProfileThe successful candidate will be a technically competent electrical engineer who can operate confidently between design documentation, site inspection and quality management.We are particularly interested in candidates from one of two backgrounds:Electrical Design EngineerAn electrical design engineer who has moved into, or has an interest in, technical assurance and site-based quality, and who can apply their understanding of design intent to construction.Electrical QA/QC Engineer or ManagerAn experienced electrical QA/QC professional who has strong technical and design knowledge and is capable of reviewing specifications, drawings and technical submissions rather than simply undertaking checklist-based inspections.In either case, the individual must be able to read the design, understand the specification, inspect the installation and make a technically informed assessment of compliance.Key Personal AttributesThe successful candidate will be:•Technically strong and engineering-led•Design focused rather than purely inspection focused•Thorough and detail oriented•Confident reviewing drawings and specifications•Comfortable challenging non-conforming work•Independent and objective in their approach•Proactive in identifying potential issues before they become defects•Strong in communication and stakeholder management•Organised and methodical•Comfortable working directly with subcontractors and project teams•Confident presenting quality issues at project and site meetings•Digitally and IT literate•Able to manage multiple inspections, actions and priorities•Practical and solutions focused•Focused on achieving quality progressively rather than relying on end-of-project inspection JBRP1_UKTJ

• Lead the design development of electrical building services systems, including HV/LV power distribution, substations, transformers, standby generation, switchgear, cable containment/routing, lighting, small power, earthing, and lightning protection., • Prepare and review electrical design calculations, load schedules, single-line diagrams (SLDs), cable sizing, protection coordination/discrimination studies, and voltage drop calculations., • Produce and check design drawings and specifications using AutoCAD/Revit MEP (BIM), ensuring compliance with SS 638 (Code of Practice for Electrical Installations), SS 531, Singapore Standards, BCA, EMA, SCDF, and other relevant statutory and regulatory requirements., • Coordinate with architects, C&S engineers, mechanical/ACMV engineers, and other M&E disciplines to ensure clash-free, buildable, and coordinated designs., • Review and respond to tender and contract drawings, specifications, and Bills of Quantities for electrical scope; support tendering and cost estimation as needed., • Liaise with authorities (e.g. SP PowerGrid/EMA, SCDF, BCA) for submissions, approvals, and licensing of electrical installations., • Provide technical support during construction, including reviewing shop drawings, method statements, and material submissions from subcontractors/vendors., • Conduct site inspections, testing, and commissioning oversight to ensure installed works conform to design intent and applicable codes., • Investigate and resolve technical issues arising on site, proposing practical and cost-effective design solutions., • Mentor and guide junior/graduate electrical engineers and draughtsmen, reviewing their output for technical accuracy., • Keep up to date with new technologies, energy-efficient design practices, and evolving regulatory requirements (e.g. Green Mark, sustainability standards)., • Support project handover documentation, including as-built drawings, O&M manuals, and testing/commissioning records. Education • Degree in Electrical Engineering or related discipline; Professional Engineer (PE) registration in Singapore is an advantage. Experience • Minimum 6–10 years of relevant experience in electrical building services design, with at least 2–3 years in a senior/lead design role., • Proven track record on major building, infrastructure, or MRT/rail-related projects in Singapore is highly preferred., • Experience working with LTA, BCA, EMA, and SCDF submission processes. Skills & Competencies • Strong technical knowledge of electrical distribution systems, HV/LV switchgear, protection systems, standby power (generators/UPS), and lighting design., • Proficient in AutoCAD; working knowledge of Revit MEP/BIM workflows is highly advantageous., • Familiar with relevant Singapore Standards (SS 638, SS CP5, SS 531) and international standards (IEC/BS) as applicable., • Strong analytical, problem-solving, and design-coordination skills., • Good written and verbal communication skills; able to liaise confidently with consultants, authorities, and clients., • Leadership ability to guide a design team and manage multiple concurrent project deliverables., • Detail-oriented, organised, and able to work to project deadlines. #J-18808-Ljbffr

Electrical Maintenance Engineer Stevenage, Hertfordshire £40,000 - £45,000 We've got an excellent role for an Electrical Maintenance Engineer to join our client on a fantastic site in Hertfordshire! This is a standout role if you're looking to avoid the commute into London, join a well known commercial provider and be part of a well experienced team! This is a static role, following a fixed schedule of Monday - Friday, 8am - 5pm As an Electrical Maintenance Engineer, you will carry out PPM and reactive maintenance on electrical systems, troubleshoot / fault find, work on mechanical systems, update site logbooks, liaise with contractors and respond to client needs. Electrical Maintenance Engineer Duties: • Carrying out PPM and reactive maintenance, • Working on single & three-phase power systems, • Motors and generators (including on/off load testing), • UPS systems, • Emergency lighting and fire alarm testing, • HVAC systems, • Pumps, belts, bearings, mechanical seals, • BMS operation, • Maintaining logbooks and site documentation Electrical Maintenance Engineer Requirements: • City & Guilds / NVQ (or equivalent) in Electrical Installations, • Minimum 3 years' experience in commercial building maintenance, • Career-driven and motivated individual, • Professional, polite, and personable approach Salary and Package: • £40,000 - £45,000 per annum, • Monday - Friday, 8am - 5pm, • 25 days annual leave + Bank holidays, • Company pension scheme, • Overtime available, • Internal progression, • Additional training JBRP1_UKTJ

Electrical Engineer Weybridge, Surrey Up to £45,000 per annum We are currently recruiting for an Electrical Engineer to join a well-renowned service provider, working on a large, high-end commercial site comprising office spaces, laboratories and associated facilities. This is an excellent opportunity for an electrically biased engineer looking to develop their career, with access to further training and progression, including LVAP and HVAP training. The successful candidate will be responsible for carrying out planned preventative maintenance (PPM) and reactive maintenance across electrical systems, while also being comfortable working on mechanical building services equipment. You will help ensure the site operates efficiently, diagnose faults, complete relevant testing and maintain high standards of service. Electrical Engineer Duties: • Carrying out planned preventative and reactive maintenance., • Working on single and three-phase electrical systems., • Electrical fault-finding, testing and installations., • Diagnosing faults and carrying out remedial repairs., • Maintaining motors, generators and associated equipment., • Working on UPS systems., • Testing emergency lighting and fire alarm systems., • Carrying out maintenance on HVAC systems., • Basic mechanical maintenance, including pumps, belts, bearings and mechanical seals., • Operating and monitoring BMS systems., • Maintaining logbooks, site records and maintenance documentation., • Supporting the wider engineering team to ensure the smooth running of the site. Electrical Engineer Requirements:, • City & Guilds, NVQ or equivalent qualification in Electrical Installations., • Minimum of 3 years' experience in commercial building maintenance., • Electrically biased, with a good understanding of mechanical building services., • Motivated and career-driven, with an interest in further training and development., • Professional, personable and confident working within a client-facing environment., • Full UK driving licence preferred but not essential. Salary and Package:, • Up to £45,000 per annum., • Monday to Friday working pattern., • Working hours of either 7:00am–4:00pm or 8:00am–5:00pm, • 25 days annual leave., • Company pension scheme., • Private healthcare and dental care., • LVAP and HVAP training opportunities., • Internal career progression., • Overtime available., • SC security clearance required, with the opportunity to start work while clearance is being processed., • Two-stage interview process: Microsoft Teams followed by a face-to-face interview. JBRP1_UKTJ

Nationwide | Retail Fit-Out | Permanent £24.85 per hour + van + fuel card + BUPA + life insurance + pension + holiday Realistic earnings based on 50 to 80 hours per week during working weeks are approximately £62,500 to £96,400 before tax, excluding lodge allowance and expenses. If you're an Electrician or Electrical Engineer who wants steady work, strong earning potential and the chance to work across well-known retail and hospitality projects, this is a strong opportunity. You'll be joining a long-established electrical contractor delivering installation works across retail, hospitality, commercial and multi-site rollout environments. The business has a strong directly employed engineering team, a long-standing client base and a reputation for keeping hold of good people. Most of the work is retail fit-out, refurbishment, rollout and installation work for recognisable high-street and hospitality clients. Projects are normally planned within around an hour of where you live, although you must be willing to travel nationally when required. This is a roving role, but it is not a permanent stay-away position. Most engineers are home most weeks, but there will be times when you may need to stay away for three, four or five days depending on the project. You'll be working as a mobile Electrician / Electrical Engineer, carrying out electrical installation works across retail and commercial sites. The work is expected to include fast-track fit-outs, retail refurbishments, lighting, power, containment, small works, electrical modifications, distribution, final connections, remedials and general installation support. You'll be trusted to work to a high standard, represent the business professionally on client sites and help deliver projects safely, quickly and properly. The company guarantees 37.5 hours, but most engineers voluntarily work higher hours. It is common for engineers to work between 50 and 80 hours a week, depending on workload, travel, programme and project requirements. At £24.85 per hour, with 33 days' holiday paid at 7.5 hours per day, that gives a rough annual earning range of approximately £62,500 to £96,400 before tax, based on 50 to 80 hours per week during working weeks. Lodge allowance is paid where applicable through the JIB and claimed weekly alongside weekly pay. • Carrying out electrical installation works across retail, hospitality and commercial fit-out projects., • Working on fast-track refurbishments, rollouts, small works and planned installation schemes., • Installing containment, cabling, lighting, power, distribution, accessories and associated electrical systems., • Supporting testing, inspection, snagging, remedials and handover where required., • Reading drawings, site information and work instructions to deliver installations correctly., • Working safely in live or fast-moving retail environments., • Liaising with site managers, project managers, client representatives and other trades., • Keeping accurate records of works completed, materials used, issues raised and any follow‑on requirements., • Travelling to projects across the UK when required, although work is normally planned within around an hour of your home location., • Staying away when the project requires it, usually for short periods rather than every week., • Representing the business professionally on client sites and maintaining a high standard of workmanship., • You must hold a valid Gold Card, either ECS or CSCS., • You'll need to be a qualified Electrician or Electrical Engineer with strong installation experience., • Retail fit-out experience would be ideal, especially if you have worked on fast-track projects, rollouts, refurbishments or live trading environments., • Testing and inspection would be useful, particularly 2391, 2394 / 2395 or equivalent, but it is not essential., • You should be comfortable working independently, travelling to different sites and dealing with changing project requirements., • Experience across lighting, power, containment, small works, distribution, remedials and fit-out installation would be highly relevant., • You’ll need a full UK driving licence., • You must be willing to travel nationally when required and stay away occasionally when project demand calls for it. You're reliable, practical and used to getting the job done. You take pride in the standard of your work and understand the pace of retail fit-out. Programmes are tight, clients expect things done properly and there is not much room for poor communication or unfinished work. You'll suit this role if you want a permanent position with a business that values its engineers, offers strong earning potential and provides proper support through a van, fuel card, private medical cover, life insurance, pension, paid holiday and weekly pay. This is a good opportunity for an Electrician or Electrical Engineer who wants variety, regular work, strong hours and the chance to work across major retail and hospitality projects without being stuck on the same site every day. • £24.85 per hour., • Van and fuel card., • BUPA private medical., • Life insurance., • Government pension., • 25 days' holiday plus bank holidays., • Train travel covered where required., • JIB lodge allowance where applicable., • Weekly pay., • Lodge claims paid weekly. Realistic earnings based on 50 to 80 hours per week during working weeks, with 33 days' holiday paid at 7.5 hours per day, are approximately £62,500 to £96,400 before tax, excluding lodge allowance and expenses. #J-18808-Ljbffr

AtkinsRéalis is one of the world's leading design, engineering, & project management consultancies, employing over 50,000 professionals globally. The Building Design Practice delivers innovative engineering solutions across a wide range of sectors throughout the UK, including Commercial, Healthcare, Residential, Education, Rail, Heritage, and Blue Light projects. This role offers the opportunity to work within a national team of Building Design professionals, contributing to complex and high-profile projects. The position provides exposure to cutting-edge digital technologies, project management, sustainable design, & collaboration with global teams. It is an excellent opportunity for an Electrical Building Services Engineer to further develop their technical expertise while supporting AtkinsRéalis' commitment to innovation, digital engineering, & decarbonisation. Your role Design and specify electrical building services systems including power, lighting, earthing, life safety, telecoms, security, access control, lifts, and lightning protection. Produce detailed engineering calculations, technical specifications (NBS), reports, & project documentation. Collaborate with BIM teams, Global Technology Centre (GTC), & multidisciplinary stakeholders to deliver high-quality designs. Attend client & contractor meetings, undertake site surveys and inspections, & monitor installation works. Manage assigned project deliverables, budgets, timelines, risks, & scope changes. Ensure compliance with quality, environmental, & governance standards. Support the development & mentoring of junior engineers. Contribute to digital engineering, sustainability, innovation, & AI-driven design initiatives. Degree qualified in Building Services Engineering, Electrical Engineering, or a related discipline, with Chartered Engineer status (or working towards CEng via CIBSE/IET). Proven experience in electrical building services design within a consultancy or contractor design environment. Proficient in industry software including Amtech/ProDesign, Dialux/Relux, NBS, Microsoft Office, & ideally Revit and HV design tools. Strong understanding of UK technical standards, BIM, digital engineering, & modern design practices. Knowledge of decarbonisation, energy efficiency, building physics, carbon data analysis, commissioning, & performance evaluation. Experience or interest in Battery Energy Storage Systems (BESS), Photovoltaic (PV) design, & renewable energy solutions. Strong communication, report writing, presentation, & client-facing skills. Self-motivated with the ability to manage workloads independently, work within budgets & deadlines, & drive innovation in Revit, Digital Engineering, & AI. Explore the rewards and benefits that help you thrive - at every stage of your life and your career. Enjoy competitive salaries, employee rewards & a brilliant range of benefits you can tailor to suit your own health, wellbeing, financial & lifestyle choices. Make the most of a myriad of opportunities for training & professional development to grow your skills & expertise. And combine our hybrid working culture & flexible holiday allowances to balance a great job & fulfilling personal life. We're AtkinsRéalis, a world-class engineering services & nuclear organization. We connect people, data & technology to transform the world's infrastructure & energy systems. Together, with our industry partners & clients, & our global team of consultants, designers, engineers & project managers, we can change the world. We're committed to leading our clients across our various end markets to engineer a better future for our planet & its people. Find out more. This role may require security clearance and offers of employment will be dependent on obtaining the relevant level of clearance. If this is necessary, it will be discussed with you at interview. The vetting process is delivered by United Kingdom Security Vetting (UKSV) and may require candidates to provide proof of residency in the UK of 5 years or longer. If applying to this role please do not make reference to (in conversation) or include in your application or CV, details of any current or previously held security clearance. We are committed to creating a culture where everyone feels that they belong - a place where we can all be ourselves, thrive & develop to be the best we can be. So, we offer a range of family friendly, inclusive employment policies, flexible working arrangements & employee resource groups to support all employees. As an Equal Opportunities Employer, we value applications from all backgrounds, cultures & ability. As a Disability Confident Leader, we are committed to offering an interview to all applicants who have a disability and meet the essential criteria. If you would like to be considered under this commitment, please let us know at the application stage. We strongly believe that world-class talent makes no distinctions based on gender, ethnic or national origin, sexual identity and orientation, age, religion or disability, but enriches itself through these differences. Created by the integration of long-standing organizations dating back to 1911, AtkinsRéalis is a world-class engineering services & nuclear company dedicated to engineering a better future for our planet and its people. We create sustainable solutions that connect people, data & technology to transform the world's infrastructure & energy systems. We deploy global capabilities locally to our clients & deliver unique end-to-end services across the whole life cycle of an asset including consulting, advisory & environmental services, intelligent networks & cybersecurity, design & engineering, procurement, project & construction management, operations & maintenance, decommissioning & capital. The breadth and depth of our capabilities are delivered to clients in strategic sectors such as Engineering Services, Nuclear and ... (maybe truncated) News and information are available at Atkinsrealis or follow us on LinkedIn. #J-18808-Ljbffr

What if you could do the kind of work the world needs? What if you could do the kind of work the world needs? At WSP, you can access our global scale, contribute to landmark projects and connect with the brightest minds in your field to do the best work of your life. You can embrace your curiosity in a culture that celebrates new ideas and diverse perspectives. You can experience a world of opportunity and the chance to shape a career as unique as you. To find out more about our Property and Buildings business click on the following link and discover what awaits you at WSP: Property and Buildings | WSP • A little more about your role…, • You will be joining our expanding Buildings Technology Systems team, as a Smart Building & System integration technical specialist, with accountability for design, project management and delivery of projects from inception through to handover to the client., • At WSP our Building Technology Systems (BTS) team provide Smart, ICT, Audio Visual & System Integration design. We're looking for an Associate level Engineer to join the UK Building Technology Systems team with a background in technical delivery of smart building system integration., • You will take a key technical leadership role leading from concept stage through to detailed design, managing technology design & systems integration design activities on multi-disciplinary design projects in coordination with Architects, Engineers, and specialist consultants, • You will liaise with clients and stakeholders to understand, develop, and interpret their requirements from concept stage through to detailed design, on multi-disciplinary design projects in coordination with Architects, Engineers, and specialist consultants, • Collaborate across WSP with specialists in areas like Security, Lighting, ICT, VT, BMS, AV to develop holistic and comprehensive Smart Buildings solutions., • Create future-ready buildings to deliver great user experiences, innovating the building landscape., • We work on a variety of projects, helping clients to navigate and embrace emerging technologies. We work closely with building owners, tenants, and developers from around the world on large, complex projects with a focus on user experience, operational efficiency, and sustainability., • Our UK Building Services Team is delivering projects ranging from High Rise Towers such as 22 Bishopsgate and 40 Leadenhall, to hyper scale Data Centres, to Stadia such as Fulham Football Club to transformative Healthcare projects such as the Monklands Hospital digital twin., • As leaders in Building Technology consultancy, our aim is to set the standard for providing specialist ICT and Smart Building consulting to clients across the built environment., • Demonstrate interest in emerging technologies in the built environment, evidenced through practical application, research or professional experience and have the ability to articulate potential applications, innovations and impacts., • Experience in Smart Building Technology design and project delivery of medium to large building projects., • Ability to develop, review and specify solution and solutions architectures that integrate building systems with enterprise IT infrastructure, interoperability, and data exchange considering cybersecurity and operational resilience., • Experience developing systems integration strategies that bridge traditional building automation with modern IoT, cloud platforms, and enterprise systems., • Ability to develop of digital strategies centred around Smart buildings. This could include integration approaches, solution review, technical specifications, and architecture topologies., • Proven ability to engage with clients, working groups, designers, and vendors to develop smart building solutions that meet client and governance criteria., • Understanding of design and specification and implementation of building systems technologies, documenting formal requirements for approval and development, and roadmaps to implementation., • Capability to produce detailed design and performance specification, subject to review by colleagues prior to issue., • Understanding of cybersecurity considerations for smart building implementations, • Demonstrated understanding of emerging AI solutions relevant to the built environment, with the ability to articulate potential application and practical use cases., • Contribute to bids and proposals; Assist in identifying opportunities within existing or new clients and support teams in securing follow‑on work., • Provide clear and visible technical leadership for building technology workstreams, offering advice and direction to project teams and junior colleagues., • Review reports and designs to evaluate approaches and technical designs against smart building expectations. Clearly document reviews, risk assessments, and issue resolution., • Have the ability to collaborate within a multidisciplinary team and communicate technical detail graphically and effectively with other members of the project team, stakeholders & clients., • A detailed understanding of specialist building systems including MEP, BMS, fire safety, lighting and security systems, the ICT infrastructure aspects of deploying modern smart buildings, • In depth knowledge of smart building rating systems such as SmartScore, Smart Building certification; Awareness of relevant industry accredited certification such as WELL, LEED, NABERS, BREAAM, etc, • CIBSE (Chartered Institution of Building Services Engineers) / IET / Engineering Council accredited or specific experience that will lead to Chartership, • Candidates must be eligible to live and work in the UK and must be capable of achievingSC-levelUK security clearance. Demystifying Vetting - GOV.UK Imagine a better future for you and a better future for us all. Join our close-knit community of talented individuals who share your passion for making a positive impact. Our global team includes more than 69,000 employees, working together to make a difference in communities both close to home and around the world. We are one of the world’s leading engineering and professional services firms. Our passionate people are united by the common purpose of creating positive, long-lasting impacts on the communities we serve through a culture of innovation, integrity, and inclusion. With over 11,000 professionals across the UK and Ireland, we are dedicated to our local communities and propelled by international brainpower. At WSP, we understand that work is just one aspect of your life. It’s important to make time for you, your family, friends, interests and your community. Our hybrid working policy offers the flexibility to work from home two days a week, while also providing opportunities to collaborate in our modern offices across the UK. We welcome applicants with varied backgrounds and experiences. We enable rewarding careers by encouraging people to bring their whole and authentic selves to work so that our work represents the fullest spectrum of society. We celebrate integrity and treat people with respect, supporting each other and embracing a culture of inclusion and belonging at WSP. We have our employee resource groups bring together employees and allies with different backgrounds to promote a culture of inclusivity. We are committed to supporting our people, giving you the tools to make improvements to your health and wellbeing through our Thrive programme. Our Virtual GP service gives you access to an NHS or Irish Medical Council GP at a time and place that suits you – giving you peace of mind and quick access to medical advice when you need it most. We also provide reasonable workplace adjustments for those in need. Additionally, you can benefit from the Gymflex scheme, which offers up to 40% off annual gym memberships through our WSP flexible benefits program, as well as a comprehensive menopause support package. To enhance work-life balance, WSP offers the “WSP My Hour,” allowing you to take one hour each day for personal activities, with the flexibility to make up the time earlier or later that day. We also provide part‑time and flexible working arrangements, the option to purchase additional leave, and the ability to use your bank holiday entitlement to suit you. We understand the importance of development and training to you. That’s why we foster a supportive environment that invests in your growth, whether through training, mentoring, or Chartership. Here at WSP we positively encourage applications from suitably qualified and eligible candidates regardless of sex, race, disability, age, sexual orientation, gender reassignment, religion or belief, marital status, pregnancy or maternity/paternity. As a Disability Confident leader, we will interview all disabled applicants who meet the essential criteria, please let us know if you require any workplace adjustments in support of your application. #J-18808-Ljbffr

WSP in the UK & Ireland seeks an Associate level Engineer to join the Buildings Technology Systems team, leading from concept to detailed design in smart building system integration. You will manage technology design and systems integration across multi-disciplinary projects, coordinating with architects, engineers and specialists. You will liaise with clients to understand requirements and develop architectures, while collaborating with security, ICT, lighting, AV and BMS specialists to deliver #J-18808-Ljbffr

AtkinsRéalis in the UK is seeking an Electrical Building Services Engineer to design power, lighting, earthing, life safety, telecoms, security and LV/HV systems for high-profile projects. You will collaborate with BIM teams, participate in client meetings, oversee deliverables and budgets, and con

AtkinsRéalis in the UK is seeking an Electrical Building Services Engineer to design and specify electrical systems across power, lighting, life safety, telecoms, and lifts. You'll hold a degree in Building Services or Electrical Engineering, aim for Chartered status, and bring experience in consul

WSP is seeking a Principal Lighting Engineer to join the Lighting & Energy Solutions team in the UK. You will have extensive experience in external lighting design, CAD/Dialux, and a track record in local government or road network sectors.

Seeking an experienced Lighting Design Engineer for a contract role in London, focusing on high-profile, complex building services projects.

WSP is seeking a Senior Lighting Engineer to join the Lighting & Energy Solutions team in the UK. The role requires proficiency in Lighting Reality, Dialux, and AutoCAD, with a strong grasp of lighting standards and electrical design. You will collaborate with cross-disciplinary designers and client

Entry-level Lighting Design Engineer wanted for a friendly team.

Trainee Lighting Design Engineer required to join a personable, productive and welcoming team. Qualifications in engineering, lighting, electrical or a related technical field is highly desirable. Design & Modelling: Using CAD software such as AutoCAD and ReluxCAD to develop 2D drawings and 3D model

Senior Lighting Engineer – Major Highways Infrastructure. About the Senior Lighting Engineer Role. Are you an experienced Senior Lighting Engineer looking to play a critic.

Become a food delivery driver with Deliveroo and find work that suits you.Make money on your own schedule with your own vehicle (scooter, bike or car).Work when you want to, at the tap of a button.Scooter, bike or car (with license and insurance).Smartphone with iOS 12 / Android 6 or above.Proof of

Lead the design, asset management, and improvement of highway electrical infrastructure on major UK road projects.Drive safety, innovation, and sustainability in a multidisciplinary team.

Van rental £110 a week, the lowest in the market.Self-employed delivery driver, Exeter.We are hiring self-employed multi-drop delivery drivers at our Exeter depot.Work is available all year round, you get paid every week, and you can be on the road within days.You do not need delivery experience.We

We have an amazing opportunity for an experienced Electrical Installation engineer who is keen to train and teach the new NVQ Level 3 Electrical Installation standards.

Competitive Salary + Bonus + Excellent Benefits.Delivery Driver 12t - Cardiff - Pipe and Climate.We are Pipe and Climate Centre, part of the Wolseley Group - a leading specialist trade merchant across the UK and Ireland.We pride ourselves in putting our people and customers at the heart of everythin

Job Title - Lift Service Engineers Pickerings Lifts is a nationally recognized, privately owned, and independent lift specialist with an impressive 170 years of experience. We are looking for a Lift Service Engineers in our Cardiff Region. Referral Bonus Scheme: Recommend a fully qualified engine

Delivery Driver / Self Employed Courier Earn £60 - £100+ per delivery day, plus up to £2,500 extra in Christmas bonuses.Looking for local delivery work this Christmas? Join Evri on a regular local round, with agreed delivery days and flexibility within your delivery day.Typical rounds take around

Invested in Technology Our engineers are provided with tablets, smartphones and access to our market-leading in-house systems, making administration simple and allowing you to focus on the job.

Starting on £34,715 you will increase £1,000 each time after completing 6 and 12 months of service to £36,715 per annum Role summary: To deliver customers' products to the required premises ensuring all customers receive exceptional customer service as part of a multi-drop delivery route.The dr

The Opportunity Due to continued growth, an exciting opportunity has arisen for a Service Engineer to join an established and highly respected engineering team. Service Engineer South Wales | Permanent | 36 Hours Per Week Expected Earnings: £43,000 - £50,000+ About the Company Are you a Ma

Hunter Selection Limited is a recruitment consultancy with offices UK wide, specialising in permanent & contract roles within Engineering & Manufacturing, IT & Digital, Science & Technology and Service & Sales sectors. Senior Electrical & Instrument Engineer Barry CF64 £50-70,000 Commutable from Ca

Maintain and certify all areas of the business; commercial and domestic properties, inclusive of but not limited to; all properties and schemes operated by Hedyn and external lighting where Hedyn have control over the electrical supply and are able to isolate. Installation and condition reports of m

Required Skills & Experience: • Recognised electrical qualification (NVQ Level 3 / City & Guilds 2365 or equivalent, HNC/HND/degree in electrical engineering desirable) • Proven experience installing, commissioning, maintaining and repairing UPS systems. Roles & Responsibilities • Install, com

Qualifications:A degree or equivalent qualification in Electrical Engineering, Building Services Engineering or a related discipline. You’ll bring:Significant experience in electrical engineering design within a consultancy or similar engineering environment. You’ll work closely with Project Man

Ability to interrogate relevant data stored in site systems to aid trouble shootingEducation/ExperienceDegree or equivalent in Electrical Engineering with significant experience. Experience in engineering and maintenance roles within a related industry. If you do not meet every requirement, or your

Salary: £50,000 - £60,000 + Car Allowance + Benefits.Location: South of England - UK-Wide Travel Required.Scroll down the page to see all associated job requirements, and any responsibilities successful candidates can expect.Our client is a globally recognised leader in advanced aesthetic technolo