Mechanical engineer contract jobs in JarrowCreate job alerts

Imperial Recruitment Group are delighted to announce that we are working on a retained basis with Walker Filtration to recruit a Mechanical Design Engineer to be based at their Washington site. LOCATION: Washington SALARY: Competitive LENGTH OF CONTRACT: Permanent ROLE SUMMARY: Walker Filtration was acquired by the Atlas Copco group in March 2018 and has the mission to become the Global Competence Centre for Compressed air, Gas and Vacuum Filtration within the group. Walker Filtration has its factory and headquarters in the North of England but employs around 330 people worldwide with Customer Centres in the United States, Europe and Japan. The purpose of this role is to drive Walker Filtration’s vision of being a competence centre for Industrial Filtration and Medical product ranges. The Design Engineer does this through the design, development and maintenance of new and existing market leading products. Reporting to the Engineering Manager, working as part of the engineering design team, the role is very much ‘hands on’ where you will be tasked with creating innovative designs to expand our current product portfolio. The role will also be involved with maintaining existing product ranges, with projects focused on optimisation and cost savings. Leading the delivery of assigned projects to ensure they’re on time, to budget and of optimum quality. DUTIES ARE BUT NOT LIMITED TO: • The design, development, verification and implementation of technically innovative and commercially competitive new products, • More specifically, the design, development or selection and packaging of compressed air and gas treatment products including pressure vessels, pneumatic control systems, compressors, vacuum pumps, desiccant dryers, etc., • To ensure that all component parts and products are designed in strict compliance with mandatory national and international regulatory requirements and standards, as appropriate, • Compile and manage technical construction files as appropriate to the product, • Create and manage Bills of Material (BoMs) throughout the product lifecycle, • The maintenance and improvement of existing products and components to improve quality production efficiency and cost reduction., • To lead projects when required, ensuring that projects are delivered on time, to budget, and engineering quality is of primary importance, • The production and maintenance of technical documentation, including CAD drawings, costing data, design calculations, test data etc., • Support prototype development and testing, including troubleshooting issues and refining designs based on test results, • Work closely with suppliers to ensure designs are manufacturable, material selection is optimal and that target cost is met, • Filtration and Medical product and application knowledge to support queries from both internal and external customers, • Maintain high quality standards of engineering process according to QA standards and the CtP (Concept to Product) 2.0 business process, • Support the design review process such that all product designs are market leading and that lessons learned are a key part of product development, • Manage personal workload to ensure timing and commitments are realistic and achieved, • Support the intellectual property process to ensure patents, or similar, are technically robust and supported through the application and granting process, • Provide specialist technical support during customer and supplier meetings and visits, as required, • Provide technical support to the Operations team, as required, • Promote a culture of collaboration across Walker Filtration and the wider Atlas Copco Group, • Assist in the development and training of more junior Engineers, Technicians and Apprentices as appropriate/required TO BE CONSIDERED FOR THIS ROLE YOU WILL HAVE: • A relevant mechanical Engineering Degree (preferably post-graduate), or have relevant experience in the role, • Demonstrable experience in a product design and development role with a demonstrable and proven track record of new product development success., • Proficient 3D CAD & PLM user., • A natural energy with a positive attitude to the role., • Self-motivated, systematic, controlled and well organised, building professional relationships, instilling confidence and trust., • Attention to detail with a diligent and pragmatic 'no-nonsense' approach to task and project completion is essential, • A drive to perform tasks properly and thoroughly while adhering to company guidelines, procedures and policy., • Decisive; possess the ability to rationalise and make reasoned technical and commercial decisions particularly under pressure., • Commercially astute, • Communicates proficiently and effectively at all levels., • Can compile and present accurate technical and general business documentation., • Strong abilities in concept generation, mechanical design, DFMEA process, design for production and service. For more information on this opportunity please feel free to contact Adam Pearson at Imperial Recruitment Group.

Skilled Train Maintainer£38.52 Umbrella (Inside IR35) Permanent nights, mix of 4 on / 4 off and 5 on / 5 off3-month rolling contract (with strong long-term potential for the right candidate)Level 3 Qualification in Engineering required The Role Step into a hub of technical excellence, handling the inspection, maintenance, fault diagnosis, and overhaul on passenger fleets. We’re recruiting skilled Technicians to join a cutting-edge rail operation in the North where innovation meets precision. If you take pride in precision engineering and want to work in a facility designed for excellence, this role is built for you Key Responsibilities • Carry out servicing, maintenance, repair, and overhaul of traction and rolling stock to company standards (Mechanical and Electrical), • Diagnose faults and implement effective solutions, • Use and maintain tools, equipment, and materials responsibly, • Operate plant and equipment in line with competency certification, • Follow all technical instructions and quality procedures (including ISO standards) Essential • NVQ Level 3 in an Engineering discipline, • Must be able to pass a Medical and a Drugs and Alcohol assessment. What’s on offer • Opportunity to work in a technically challenging rail engineering environment, • Training and development through hands-on mentoring, • Stable, long-term role with overtime available when required APPLY NOW If you’re an experienced engineer looking for a well-paid, long-term opportunity on permanent nights, and want to be part of a team that truly keeps the North moving — we want to hear from you.About Ford & Stanley groupFord & Stanley Talent Services Group are in the business of people and performance. Our mission is to create one million better workdays through facilitating great recruitment, leadership and occupational mental fitness. We support our clients in their most challenging business areas – recruiting, developing and retaining the best talent from shop floor to boardroom. • Ford & Stanley TalentWise – Business specialising in blue collar trade & technical services – permanent and temporary., • Ford & Stanley Recruitment – Business specialising in white collar spanning all company functions with specialist verticals within Digital, Rail Engineering, Civils & Infrastructure, General Manufacturing, Supply Chain & Logistics both permanent and contract., • Ford & Stanley Executive Search – Business specialising in Executive Search & Executive Interim Solutions in the UK, North America, Middle East and Europe., • Ford & Stanley Genius Performance – Performance is always accelerated when good people are coached, inspired, trained and focused in the right way. Ford & Stanley Talent Services Group Ltd is a Disability Confident employer that is committed to a policy of equal opportunities for all opportunity seekers. We shall adhere to such a policy at all times and will review on an on-going basis all aspects of recruitment to avoid unlawful or undesirable discrimination. We will treat everyone equally irrespective sex, sexual orientation, gender reassignment, marital or civil partnership status, age, disability, colour, race, nationality, ethnic or national origin, religion or belief or political beliefs and we place an obligation upon all staff to respect and act in accordance with the policy. Services advertised by Ford & Stanley are that of an employment consultancy business.

A well-established multi-disciplinary engineering consultancy is seeking a Mechanical Design Engineer to join its Building Services team on a 6-month fixed-term contract. With a strong reputation for delivering innovative and sustainable engineering solutions, this is an excellent opportunity to work on high-profile projects across the commercial, pharmaceutical and industrial sectors.\n\nThis role is ideal for an experienced Mechanical Design Engineer who can quickly integrate into an established team and contribute to the successful delivery of projects from concept through to completion.\n\nThe Role\n\nWorking alongside experienced engineers and multidisciplinary teams, you will be responsible for producing high-quality mechanical building services designs while supporting projects through all stages of delivery.\n\nKey Responsibilities\n\n Design and develop mechanical building services systems, including HVAC, ventilation, heating, cooling and domestic water services.\n\n Produce technical calculations, specifications, reports and design documentation.\n\n Create and review detailed drawings using industry-standard software.\n\n Coordinate designs with electrical, architectural and structural teams.\n\n Attend design meetings and liaise with clients, contractors and project stakeholders.\n\n Ensure designs comply with current UK regulations, CIBSE guidance and sustainability standards.\n\n Support project delivery from concept through to handover.\n\nAbout You\n\nYou will have:\n\n A Degree or HNC/HND in Mechanical Engineering or Building Services Engineering.\n\n Previous experience in mechanical building services design within a consultancy or contractor environment.\n\n Strong knowledge of HVAC and building services design principles.\n\n Experience using AutoCAD, Revit, IES, Hevacomp or similar software.\n\n A solid understanding of UK Building Regulations and CIBSE guidance.\n\n Excellent communication and problem-solving skills.\n\n The ability to work independently while contributing effectively within a team.\n\nDesirable\n\n Experience in sustainable or low-carbon building design.\n\n BIM/Revit coordination experience.\n\n Previous project management or client-facing experience.\n\nWhat's on Offer?\n\n A 6-month contract with an established and respected engineering consultancy.\n\n The opportunity to work on varied and technically challenging projects.\n\n Collaborative and supportive working environment.\n\n Competitive rate or salary, depending on experience.\n\n Immediate start available.\n\nIf you're an experienced Mechanical Design Engineer available for your next contract opportunity and looking to make an immediate impact, we'd love to hear from you

Product Architect / Project Lead (Embedded Instrumentation)\nLocation: North East England\n Salary / Package: £70-90K\n \n A well-established R&D-led manufacturer of professional electronic instruments is seeking a Product Architect to lead the development of complex new products from concept through to production.\n \n This is a hands-on technical leadership role, combining system architecture and project leadership with direct involvement in embedded development.\n \n You'll lead multidisciplinary engineering teams across firmware, hardware, mechanical and software, working in close partnership with Product Management to translate market and customer requirements into deliverable engineering plans and successful products.\n \n Key responsibilities\n \nLead engineering teams through all phases of product development, from concept to production release \nDefine and own system architecture for integrated products spanning embedded firmware, hardware interfaces, mechanical design and software tooling \nManage day-to-day technical execution, resolving cross-functional dependencies and technical challenges \nContribute hands-on to embedded software development, including design, coding, debugging and validation \nWork with Project Managers to develop schedules, manage risk and track progress against milestones \nEnsure thorough system verification and validation, with a focus on accuracy, robustness and compliance \nSupport design transfer into manufacturing, including test fixtures, documentation and production ramp-up \nProvide mentorship and technical leadership across the engineering team Essential skills and experience\n \nBachelor's or master's degree in Electrical/Electronic Engineering, Computer Engineering or a related discipline \n10+ years in embedded systems development, ideally within precision instrumentation or measurement products \nStrong project management skills with a proven track record of leading product development projects to completion \nProficient in C/C++, with a strong understanding of microcontroller-based and real-time embedded systems \nSkilled in schematic capture and PCB layout \nExperience working within an electronics manufacturing environment \nComfortable working with Product Managers to define features, prioritise trade-offs and iterate on prototypes \nExperienced with Git, Azure DevOps, JIRA and similar collaborative development tools \nStrong interpersonal and communication skills in cross-disciplinary technical environments Desirable\n \nHands-on experience with measurement and instrumentation principles \nFamiliarity with calibration techniques, traceability requirements and lab standards \nKnowledge of compliance testing (EMC, safety) and certification processes \nExperience with test automation, embedded Linux or wireless communication protocols \nPrior work with contract manufacturers or third-party design partners \n Why apply\n A genuinely hands-on architecture and leadership role in a collaborative, technically demanding R&D environment, building products that professionals rely on. You'll have real influence over both the technical roadmap and product strategy.\n\nYou may have previously held the following roles.\n \n Embedded Systems Engineer, Senior Firmware Engineer, Hardware Design Engineer, Electronics Design Engineer, Embedded Software Team Lead, R&D Engineering Manager, Technical Lead, Principal Embedded Engineer, Electronic Design, Systems Architect, Product Development Lead or Instrumentation Engineer, and you are now looking to step into a broader architecture and leadership position while staying hands-on

Role Overview\n\nThe Field Service Engineer will provide comprehensive electro-mechanical service and technical support for the DTL product range. This includes assembly support, inspection and testing, site service, commissioning, fault-finding, and troubleshooting of industrial dampers and associated control systems.\n\nThe role involves working at client sites across the UK, overseas, and offshore environments, supporting both new installations and aftermarket service activities.\n\nKey Responsibilities\n\n1. Provide product support at client installations, including site meetings, expediting, inspection and testing, commissioning, troubleshooting, site supervision, and hands-on manual site work in the UK, overseas, and offshore.\n\n2. Review and acknowledge contract and product specifications, ensuring all work carried out on DTL products is fully compliant with contractual, technical, and quality requirements.\n\n3. Assist with the final build of new products at DTL manufacturing facilities and approved sub-contract manufacturers, including:\n\no Electro-mechanical assembly\n\no Installation and preparation of electrical cabling\n\no Set-up, inspection, and functional testing\n\n4. Support the assessment of service and aftermarket opportunities to contribute to quotations and help generate additional business.\n\n5. Assess, investigate, and action warranty claims as required.\n\n6. Liaise effectively with internal departments, clients, and suppliers to ensure projects are designed, manufactured, and delivered to the required standards, specifications, schedules, and contractual obligations.\n\n7. Produce clear, accurate written service reports, including photographic evidence, to document work carried out and maintain detailed service histories for individual products.\n\n8. Assist in the maintenance and updating of service records, databases, and documentation systems.\n\n9. Undertake any other reasonable duties as required to support the business.\n\n10. Participate in training and development activities as required to maintain and enhance technical competence.\n\n11. Fully support management and Directors in the ongoing development and successful operation of the business.\n\nKnowledge, Skills & Experience\n\nEssential:\n\n" Strong electro-mechanical service and support experience\n\n" Good working knowledge of pneumatic actuators and control systems, including positioners\n\n" Practical understanding of limit switches, linkage and lever mechanisms, and bearing assemblies\n\n" Ability to work independently on-site and represent the company professionally with clients\n\n" Willingness to travel extensively, including overseas and offshore work\n\nDesirable:\n\n" Previous experience working on industrial dampers\n\n" Experience in commissioning and troubleshooting complex mechanical systems\n\n" Familiarity with industrial environments such as power generation, oil & gas, or heavy process industries\n\nPersonal Attributes\n\n" Methodical and safety-conscious approach to work\n\n" Strong problem-solving and diagnostic skills\n\n" Good communication and report-writing abilities\n\n" Flexible, adaptable, and proactive attitude\n\n" Team-oriented with a strong customer-focus\n\nEducation:\n\nONC / Level 3 or higher qualification in Mechanical or Electrical Engineering.\n\nWillingness to travel and undertake offshore training when required.\n\nFull UK driving licence\n\nWe look forward to hearing from you

Mobile Refrigeration & Air Conditioning Engineer\n Newcastle\n£40,000 - £44,000 \n \n A leading facilities management provider is looking to recruit an experienced Mobile Refrigeration & Air Conditioning Engineer to join a well-established engineering team covering the NE postcode region.\n \n This is a stable, long-term role offering excellent working hours, regular overtime opportunities, and the chance to work across a varied commercial portfolio.\n \n The Role\n Working Monday to Friday, 8am-5pm, you will be responsible for delivering planned preventative maintenance (PPM) and reactive maintenance across refrigeration, air conditioning, and HVAC systems within commercial environments.\n Key Responsibilities\n \nCarrying out PPM and reactive maintenance on refrigeration and AC equipment \nFault finding, diagnosing, and repairing refrigeration and HVAC systems \nWorking on compressors, chillers, commercial refrigeration systems, and associated controls \nConducting routine inspections and preventative maintenance \nRepairing or replacing defective components including motors, thermostats, relays, filters, belts, valves, and controls \nSupporting with general building services maintenance including HVAC, mechanical, and fabric tasks \nEnsuring all works are completed in line with health & safety procedures and client expectations Requirements\n \n To be considered, candidates should have:\n \nStrong experience within refrigeration, air conditioning, or HVAC maintenance \nExperience delivering reactive and planned maintenance within commercial buildings \nGood fault-finding and diagnostic skills \nExperience working within FM or building services environments \nStrong understanding of health & safety procedures including RAMS Qualifications Required\n \nCity & Guilds 2079 Safe Handling of Refrigerants (or CITB J11 equivalent) \nNVQ Level 2/3 or City & Guilds in Commercial Refrigeration & AC Systems \nNVQ Level 2/3 or City & Guilds in Heating & Ventilation \nNVQ Level 2/3 or City & Guilds in Heating & Ventilation Service & Maintenance What's On Offer\n \n£40,000 - £44,000 basic salary \nMonday to Friday working pattern \n25 Days Annual Leave \nCompany van provided \nCall out rota: 1 in 10 (£140 standby payment) \nStable, long-term contract \nOvertime Available \nOpportunity to join a professional and supportive engineering team \n If you are an experienced Refrigeration & AC Engineer looking for a secure role with great hours and excellent earning potential, apply today

My client a globally renowed technology Company is looking for a Senior Electrical Design Engineer . Duties include creating detailed technical specifications, drawings, and test procedures for electrical/control systems, in accordance with contract specifications and company procedures.\n\nKey Responsibilities:\n\nPrepare electrical schematics and block cable diagrams using 2D CAD systems and specialist electrical design software (e.g., Auto-CAD Electrical, EPLAN, WSCAD).\nPrepare and maintain technical specifications, commissioning, and system test procedures for marine electrical equipment.\nProvide technical support to internal and external customers as required.\nAssist in reviewing, coordinating, and approving technical documentation from suppliers and customers.\nProvide technical support to tender activities including estimating, specification development, and bid compliance review.\nCarry out electrical calculations associated with equipment sizing, harmonic emissions, and arc flash electrical safety assessments.\nReview the configuration of motor variable speed drive control systems.\nIdentify and develop R&D and Continuous Improvement opportunities.\nBe self-motivated, use own initiative, and work independently or as part of a multidisciplinary team.\nInvestigate product safety and technical problems using structured problem-solving techniques.\nManage supplier interfaces and provide technical assistance/test result approval to suppliers.\nPerform other reasonable technical tasks as deemed appropriate to meet business needs.\n\nJob Requirements:\n\nB.Eng./B.Sc. in Electrical Engineering/Control Engineering or equivalent technical capability based on practical knowledge and experience.\nCompetent in using recognised electrical CAD packages (AutoCAD, EPLAN) for producing electrical drawings and schematics.\nExperience in creating control panel layout drawings and Engineering Bills of Materials.\nGood understanding of fundamental electrical and mechanical principles, especially within the marine or related industries.\nExperience of working in highly regulated industries.\nStrong track record in technical project delivery to quality, cost, and schedule.\nProficient in using the MS Office suite (Word, Excel, Outlook, PowerPoint).\nExperience working with suppliers, customers, and field service teams.\nAbility to build relationships that unify diverse talents and perspectives.\nProfessional and courteous conduct at all times with colleagues and customers.\nCompliance with company QHS&E policies and procedures.\nParticipation in Business improvement activities.\n\nFunctional/Technical Competencies:\n\nKnowledge of AC induction motor/PM motor control systems and variable speed drive technologies.\nUnderstanding of EMC and harmonic emission control practices.\nFamiliarity with design verification and validation processes.\nBasic knowledge of electrical equipment reliability and safety control mechanisms, verified using FMECA, HAZOP, and ARM analysis tools.\nExcellent written and verbal communication skills.\nProficiency with 2D CAD systems.\nExperience with configuration control using data management systems.\nUnderstanding of the engineering change/version control process.\n\nRole Specific Dimensions:\n\nInternal Interfaces: Sales and Marketing, Quality, Export Control, Engineering, Operations, Projects, Procurement, Stores & Logistics, Finance, Field Service/Aftermarket.\nExternal Interfaces: Customers, Suppliers, Marine Classification Societies, Defence Authorities/Navies.\n\nBenefits:\n\nAn exciting and important position working for a world-leading supplier of maritime solutions.\nAn inspiring and safe work environment.\nProfessional development and career opportunities.\nHybrid working arrangement available.\nThid is a superb company and opportunity .Please get in touch for further information on the role. Stating rate expectation

Manufacturing Engineer - 12 month FTC\nAbout the Role\nWe are working on behalf of a leading, UK-based engineering organisation operating within a highly regulated and complex manufacturing environment. This confidential opportunity is for a Manufacturing Engineer to join on 12-month fixed term contract, supporting the delivery of technically advanced products from concept into production.\nThis role offers the chance to work at the interface of design, production, and continuous improvement, ensuring efficient, high-quality manufacturing processes within a fast-paced project environment.\nKey Responsibilities\n Develop, implement, and optimise manufacturing processes, tooling, and production methods\n Support New Product Introduction (NPI) from design through to production readiness\n Create and maintain:\n Work instructions\n Manufacturing documentation\n Process flow diagrams\n Translate engineering designs into practical, manufacturable solutions\n Provide hands-on support to production teams, resolving manufacturing issues and non-conformances\n Drive continuous improvement initiatives (cost, quality, delivery)\n Participate in design reviews to ensure manufacturability and efficiency\n Work closely with cross-functional teams including design, supply chain, quality, and project management\n Analyse production data to identify trends and implement process improvements\n Ensure compliance with health & safety, quality standards, and regulatory requirements\nAbout You\n Degree (or equivalent experience) in Mechanical, Manufacturing, or related Engineering discipline\n Experience working in a manufacturing or production engineering environment\n Strong understanding of:\n Fabrication, machining, or assembly processes\n Design for Manufacture (DFM) principles\n Experience supporting NPI / production transition activities\n Ability to interpret engineering drawings and technical specifications\n Knowledge of lean manufacturing / continuous improvement methodologies\n Strong problem-solving skills with a hands-on, practical approach\n Effective communicator with experience working across multiple teams\nDesirable Experience\n Experience within heavy engineering, fabrication, or regulated industries\n Familiarity with welding, structural assemblies, or complex mechanical systems\n Experience using CAD systems or manufacturing simulation tools

TÜV SÜD – A global leader in the field of testing, inspection, management system certification and product certification renowned for quality, integrity and technical excellence.\n\nEstablished more than 150 years ago in Germany, TÜV SÜD is a leading global provider of technical services with more than 28,000 highly skilled employees across 1,000 offices worldwide. TÜV SÜD offers a wide range of testing & product certification, inspection, auditing & system certification, training and knowledge services. We are a premium quality, safety, and sustainability solutions provider.\n\nRole Overview:The Vertical Transportation Consultant role incorporates design, project management and maintenance account management services to major clients and projects. \n\nMain Duties & Responsibilities: \nSite surveys, evaluation and assessment of existing lift and escalator installations \nProduce client reports with recommendations and solutions \nProduce technical and performance specifications \nAnalysis of contractor proposals and production of tender reports \nProject management of refurbishment and new installations \nQuality auditing of existing installations for maintenance reporting \nPrincipal designer duties \nClient account management – liaising with contractors to ensure delivery of their contracted services \nPreparation of fee proposals, invoicing and credit control for projects and service client responsibilities \nSeeking and generating new clients and projects \nProducing Excel spreadsheet reports, graphs, and data \nProofreading technical reports \nAssist in debt chasing \nAssist in completion of PQQ and tender questionnaires and documentation Essential Criteria: \nPrevious experience in lift industry operational roles \nBTEC HNC Mechanical or Electrical, or higher qualification \nAccount management experience for major national client/portfolio \nKnowledge of MF/1 contract \nPrevious VT experience \nKnowledge of MS Excel \nLift management experience \nCommercial experience (sales) \nHealth and safety qualification, EOR202 safe working on lifts a minimum \nDemonstrable ability to produce client reports Desirable Criteria: \nExperience with traffic analysis \nQualified and experienced site-based Lift Engineer to Technician NVQ4 or equivalent Further InformationTÜV SÜD in the UK offers a competitive salary and benefits package that includes a minimum of 33 days holiday entitlement (for full-time employees, including public holidays), a contributory Group Personal Pension Plan and a non-contributory Group Life Assurance Scheme. We also offer various Salary Exchange/Sacrifice schemes (buying/selling holiday, cycle to work scheme, pensions), incentive schemes and comprehensive wellbeing support (Employee Assistance Programme, Dental Scheme and Occupational Health services). Dependent on their role, employees may also be eligible for hybrid/permanent home-working, a Company Car/Car Allowance and Private Medical Insurance

MTrec’s new career opportunity\n\nOur client are specialists in their industry sector.\n\nThey are looking to recruit a Field Service Engineer on a permanent basis.\n\nThe Job you’ll do\n\n To carry out planned services and maintenance of company equipment.\n\n To accurately fault find and diagnose both mechanical and electrical issues.\n\n Identify required specialist equipment and connectors.\n\n Utilisation of the proper testing equipment for effective repair and maintenance\n\n Ensure all equipment is set up as required by Contract Customer's Specifications\n\n Modify generator fleet where required following instruction from the Technical Manager.\n\n Repair and maintain machinery as per company and manufacturer requirements.\n\n Attend equipment breakdowns as necessary to support the delivery of excellence customer service levels. This may require the post holder to work overtime, sometimes with short notice.\n\n Any other technical-related service as required by the business.\n\n Be part of the on-call Rota system.\n\n Support the development of high-performance teams by attending planned training, positively engaging with the training provider.\n\n Adherence to the Integrated Management Systems including Health and Safety, Environmental and Quality and all associated policies, standards, procedures and records.\n\n Ad hoc duties as the job requires.\n\nAbout You\n\n Well organised and able to prioritise tasks.\n\n Ability to work autonomously and within strict deadlines to high standards with excellent attention to detail.\n\n Confident self-starter.\n\n Experience with mechanical/electrical engineering or diesel fitting.\n\n Familiar with electronic systems and mechanical components (including engines and alternators).\n\n Deep Sea knowledge and or synchronising experience.\n\n Good IT skills.\n\n Excellent organisational skills with the ability to work under pressure to meet tight deadlines.\n\n Excellent communication skills, confident, friendly and professional manner\n\n Ability to prioritise on a daily basis a variety of tasks as and when they arise and deal with them with full confidentiality, tact and diplomacy.\n\n Strong customer focus.\n\n Field Service Engineer Job Description.\n\n Experience of working in a team and on own initiative with minimum supervision.\n\nThe Rewards and the Benefits\n\n Permanent job\n\n Competitive salary

Mechanical Engineering Lecturer Location: Newcastle Contract: Full-Time, Permanent Salary: £TBC (dependent on experience) Start Date: ASAP Were supporting a leading education provider in Newcastle who are looking to appoint a Mechanical Engineering Lecturer. This is an excellent opportunity for an experienced engineer who wants to move into teaching, training, or mentoring the next generation of engineers. The organisation is open to candidates without prior teaching experience full support and training can be provided. The Role You will deliver high-quality teaching across: • Level 2 & Level 3 Engineering programmes, • Apprenticeships, • Potential HE delivery (depending on qualifications and experience) This is a hands-on role ideal for someone who enjoys developing others and sharing practical industry knowledge. What Theyre Looking For Essential: • Strong practical industry experience in one or more of the following:, • Mechanical Engineering, • Manufacturing Engineering, • Maintenance Engineering, • Production Engineering, • CNC / Machining, • Fabrication & Welding, • Multi-skilled Engineering, • Apprenticeship / Worksho...

We are currently recruiting for a Junior Project Engineer to support a Northumberland based client. Scope of Work: Project Engineer will support delivery of a pharmaceutical project involving design, construction and of a packaging hall and warehouse facility Responsible for delivering defined engineering scopes across both equipment systems and facilities/utilities infrastructure with a focus on mechanical building services and live site tie-ins Safe execution on a live GMP site Maintaining compliance with GMP, EHS, regulatory requirements and supporting effective handover to operations Qualifications: Engineers with projects experience who can own technical workstreams while collaborating with senior engineers and cross functional stakeholders Degree in an engineering discipline ideally or equivalent experience supporting Capital projects Proven experience supporting pharmaceutical projects in a GMP regulated environment Experience with equipment specification, procurement support, installation and commissioning * Experience with facilities/utilities and building services, including live site tie-ins Contract Inside IR35 Onsite 12 months...

Exterior Lead Engineer | Automotive Exterior Systems | 12-Month Contract We are looking for an experienced Exterior Lead Engineer to support the development of next-generation vehicle exterior systems within a leading automotive engineering programme. This role will take ownership of bumper, grille, exterior trim and underfloor component development from concept through to production. Key Skills & Experience Proven experience leading exterior systems development within an automotive OEM or Tier 1 environment Strong background in bumpers, grilles, exterior finishers, trims, appliques and underfloor systems CATIA V6 / 3DX experience Knowledge of plastic injection moulding, tooling and manufacturing processes Understanding of aerodynamic requirements, pedestrian safety regulations and automotive quality standards Experience managing APQP activities, engineering change requests and supplier relationships Ability to drive component validation, vehicle testing and issue resolution through to sign-off Degree qualified in Mechanical or Automotive Engineering Responsibilities Lead commodity delivery against quality, cost and timing targets Manage engineering releases, change control and programme milestones Coordinate testing, validation and design verification activities Work closely with suppliers, engineering teams and key stakeholders to deliver robust design solutions Ensure compliance with regulatory, quality and product standards throughout development Excellent contract opportunity offering exposure to cutting-edge automotive programmes and direct engagement with a major vehicle manufacturer. For more information and direct contact with me, please send me an email and call only if required. I will be sure to check responses daily and shortlist the best candidates; if you are shortlisted, you will hear from me. JBRP1_UKTJ

MTrecs new career opportunity Our client are specialists in their industry sector. They are looking to recruit a Field Service Engineer on a permanent basis. The Job youll do • To carry out planned services and maintenance of company equipment., • To accurately fault find and diagnose both mechanical and electrical issues., • Identify required specialist equipment and connectors., • Utilisation of the proper testing equipment for effective repair and maintenance, • Ensure all equipment is set up as required by Contract Customer's Specifications, • Modify generator fleet where required following instruction from the Technical Manager., • Repair and maintain machinery as per company and manufacturer requirements., • Attend equipment breakdowns as necessary to support the delivery of excellence customer service levels. This may require the post holder to work overtime, sometimes with short notice., • Any other technical-related service as required by the business., • Be part of the on-call Rota system., • Support the de...

?? Electrical & Control Design Engineer - Contract Opportunity ?? Are you an experienced Electrical & Control Design Engineer looking to work on cutting-edge subsea technology? We're supporting a market-leading engineering organisation at the forefront of remotely operated subsea vehicle development and are looking for a talented engineer to join their team on an initial 6-month contract. ?? Newcastle ?? £45-£55 per hour ?? Outside IR35 ?? Initial 6-month contract with potential extension ?? What You'll Be Doing • Design, develop, test, and commission advanced electrical and control systems for world-class subsea vehicles and equipment., • Take ownership of projects throughout the full engineering lifecycle, from concept and specification through to commissioning, customer acceptance, and field support., • Develop and implement PLC, HMI, and SCADA solutions while supporting electrical system integration activities., • Participate in Factory Acceptance Testing (FAT), Site Acceptance Testing (SAT), and commissioning activities., • Collaborate with multidisciplinary teams including mechanical, hydraulic, electrical, and software engineers to deliver innovative engineering solutions., • Drive improvements in system performance, reliability, and maintainability across a range of exciting projects. ? What We're Looking For • Proven experience in electrical and c...

Job Title: Mechanical CNC Service Engineer Location: Manchester and surrounding areas Pay Range/details: Circa £55,000 OTE Contract Type: Permanent We are seeking an experienced Mechanical CNC Service Engineer to join our team. This is a fantastic opportunity for a Mechanical CNC Service Engineer who is looking for a field-based role with variety, autonomy, and excellent career development prospects. Key Responsibilities - Mechanical CNC Service Engineer • Carry out installation and commissioning of CNC machine tools, • Diagnose and repair mechanical faults on CNC machinery, • Perform preventative maintenance and scheduled servicing, • Conduct machine alignments geometry checks and accuracy testing, • Support troubleshooting of CNC controls including Heidenhain Siemens SINUMERIK and Fanuc, • Read and interpret engineering drawings hydraulic and pneumatic schematics, • Replace and adjust mechanical components such as ball screws linear guides bearings spindles tool changers and hydraulic pneumatic systems, • Conduct root cause analysis and provide corrective actions, • Provide technical support and training to customers where required, • Complete service reports and documentation accurately and promptly, • Liaise with internal departments regarding parts technical issues and scheduling, • Maintain company tools equipment and vehicle in good condition, • Ensure compliance with health and safety regulations and site procedures Qualifications & Requirements - Mechanical CNC Service Engineer • Proven experience servicing and repairing CNC machine tools, • Strong mechanical engineering background · Hands-on experience with CNC controls Heidenhain Siemens SINUMERIK and Fanuc, • Ability to diagnose mechanical and basic electrical faults, • Experience with machine geometry precision alignment hydraulics pneumatics and lubrication systems, • Ability to work independently in a field-based environment, • Excellent communication and customer-facing skills, • Full UK driving licence and willingness to travel with overnight stays, • Apprentice-trained engineer or equivalent qualification is desirable, • HNC/HND or NVQ Level 3 in Mechanical or Electrical Engineering is desirable, • Experience with multi-axis machining centres turning centres PLC fault-finding and laser calibration is advantageous What we can offer - Mechanical CNC Service Engineer • Competitive salary, • Overtime opportunities, • Company vehicle, • Pension scheme, • Private healthcare, • Company bonus scheme, • Training and manufacturer courses, • Tools laptop and mobile phone provided, • Expenses covered weekly, • Hotel and fuel cards Call for action: For more information on this role, please contact Charlie Boulton 01453 852544 or send a copy of your CV to Golden Line: Candidates who are currently a Mechanical Field Service Engineer, CNC Service Engineer, Maintenance Engineer, Field Service Engineer (Machine Tools) or similar may be suitable for this position. For details of other opportunities available within your chosen field please visit our website Omega is acting as an Employment Agency in relation to this vacancy. Omega does not charge candidates any recruitment or job-seeking fees at any stage of the hiring process. JBRP1_UKTJ

Overview Our client is seeking a skilled and motivated Electrical Project Engineer to join their project delivery team supporting clean water and wastewater infrastructure projects. This role is essential to the successful design, coordination, and delivery of electrical engineering solutions that meet client operational and technical requirements, particularly for Thames Water and Southern Water projects. Whilst permanent is the client's heavy preference, they would not rule out contractors. Key Responsibilities • Responsibility for the coordination and delivery of projects ranging in values and complexity, ensuring all projects to be undertaken are to an agreed cost, scope, and program., • Support the SED team in the preparation the Project design and estimate (pre implementation), • Capable of working on several projects and managing the works awarded to suppliers/subcontractors., • Provide technical knowledge on the repair, refurbishment, or replacement of equipment & plant., • Pre-construction process plan develop, implement, and monitor., • Attendance of start-up, site visit, and design meetings., • Ensure documentation is in place for handover and sign-off., • Management of scope change notices in accordance with the contract requirements (e.g., early warnings and compensation notices)., • Produce information for Project level KPIs, • Production of accurate O&Ms & Health and Safety Files as required using the appropriate resource (in-house/outsourcing)., • Managing project teams (direct and Subcontract) and accountability for project delivery., • Management of the activities of multi-disciplinary project teams in accordance with project delivery procedures. Ideal Skills & Qualifications • A minimum of five years experience in a design and build project delivery role within the water industry, • NEC 3 knowledge and experience, • HNC minimum in Mechanical or Electrical Engineering, • CSCS, • SMSTS, • 18th Edition of BS7671 (Electrical only), • Strong communication and organisational skills with the ability to manage multiple tasks., • Familiarity with 3D design tools (e.g., AutoCAD Plant 3D, Revit)., • Knowledge of UK water industry standards and practices (e.g., WIMES). JBRP1_UKTJ

iRecruit4 are recruiting a Maintenance Engineer for a specialist healthcare and medical consumables manufacturer in Swindon. The company operates in a highly regulated environment where quality, compliance, and efficiency are critical. The Maintenance Engineer will maintain, repair, and improve production equipment and machinery. We are looking for someone with a strong 50/50 electrical and mechanical background who works independently, takes ownership, and proactively supports production to enhance equipment performance and site efficiency. This is a highly autonomous role within a small team, so the successful candidate must integrate quickly, confidently engage with operators, and independently manage maintenance and continuous improvement activities. Salary & Benefits for Maintenance Engineer: • £45,000 £50,000 per annum (Depending on Experience), • Competitive pay, • Day shift hours, • Monday to Friday, • Permanent contract, • Opportunity to influence real operational improvements Key Responsibilities for Maintenance Engineer: • Electrical and mechanical fault finding and repairs, • Identify opportunities for improvement across equipment and processes, • Preventative and reactive maintenance on production machinery, • Reduce downtime and improve operational efficiency, • Support production teams with technical expertise, • Engage with operators to identify improvement opportunities, • Ensure compliance within a regulated manufacturing environment, • Work independently while knowing when to seek support, • Manage Planned Preventative Maintenance (PPM) schedules, spares, and documentation, • Contribute to continuous improvement initiatives and safety culture Requirements for Maintenance Engineer: • 18th Edition qualification and IOSH certification, • Demonstrated experience creating and managing Planned Preventative Maintenance (PPM) schedules, • Experience with PLC installation, commissioning, and fault finding, • Experience working with industrial robots, including Kuka Robotics, • Understanding of Mean Time Between Failure (MTBF) and Mean Time To Repair (MTTR), • Experience with automated production or material processing equipment and industrial control systems (e.g., Siemens TIA Portal, WinCC, Profinet/ProfiSafe, Sick Safety PLCs) Desirable (Not Essential): • Experience with heat welding, • Experience with radio frequency (RF) welding, • Experience working in an autonomous environment but knowing when to ask for support when needed If this role sounds like the right fit for you, please click apply today or contact 01793 987470 and ask to speak with Shannon. JBRP1_UKTJ

Job Title: Refrigeration Engineer Location: South Coast Pay Range/details: £46,791.53 per annum(incl.13 standby payments) Contract Type: Permanent Omega are supporting a leading facilities management provider in their search for a Refrigeration Engineer work on a major UK supermarket contract. The right Refrigeration Engineer will be the first line in all service and maintenance throughout allocated sites. They will also effectively maintain service and repair Refrigeration Equipment in customer locations and aid HVAC equipment containing refrigeration circuits. Key Responsibilities - Refrigeration Engineer • Carry out reactive and planned refrigeration maintenance within agreed timescales., • Diagnose faults, identify non-repairable issues and recommend replacements., • Complete all PPM, technical and compliance paperwork accurately and on time., • Order and fit parts in line with company procedures., • Respond promptly to Helpdesk service calls and complete repairs efficiently., • Communicate issues affecting store operations to GSMs and build strong working relationships., • Complete surveys, reports and job documentation as required., • Participate in the out-of-hours standby rota and arrange cover when needed., • Working with CO? refrigeration pack systems., • Planned on-call rota 1 in 4 weeks (hours of work paid in addition to standby payment) Qualifications & Requirements - Refrigeration Engineer • Time-served apprenticeship with NVQ/C&G refrigeration qualification., • C&G 2079 / CITB refrigerant handling certificate / F Gas Category 1, • Strong refrigeration, electrical, mechanical and diagnostic skills., • Ability to read technical drawings and apply relevant H&S legislation., • Good communication and customer-facing skills., • Self-motivated, professional and able to work at heights using access equipment., • Full UK driving licence essential. What we can offer - Refrigeration Engineer • 33 Days Holiday (Inc. Bank Holidays)., • Private Pension., • HealthShield Cashback Plan - Reclaim part of your dental/optical costs., • OneCity - Employee Discount Platform., • Employee Value Awards up to the value of £250., • Access to Costco Personal Membership Subscription., • Mental and Physical Health Services (Wisdom, Thrive, SkinVision)., • Electric Car Scheme (Criteria Applies)., • First Bus Commuter Club - Discounted Bus Travel. For more information on this role, please contact Michael Farrell on 01453 829768 or send a copy of your CV to Candidates who are currently a Refrigeration Engineer, HVAC Engineer, Air Conditioning Engineer, Maintenance Engineer or Service Engineer may be suitable for this position. For details of other opportunities available within your chosen field please visit our website Omega is acting as an Employment Agency in relation to this vacancy. Omega does not charge candidates any recruitment or job-seeking fees at any stage of the hiring process. JBRP1_UKTJ

Would you like the opportunity to play a pivotal role in the successful completion and handover of a major industrial process plant project, working for a global leader in bespoke machinery and process equipment manufacturing? The Redline Group is seeking a highly motivated Contract Completion Engineer to join our East Yorkshire-based client on a full-time basis, supporting the final stages of a large-scale fertiliser production facility. This is a fantastic opportunity to become a key member of the project team, ensuring systems are completed, documented, and handed over efficiently to support commissioning and operational readiness. As the Contract Completion Engineer, you will be responsible for managing construction completion activities across multiple systems and sub-systems. This will include preparing completion documentation packs, coordinating multidisciplinary walkdowns, generating Construction Completion Check Records (CCCRs), tracking punch-list items, and supporting the transition from construction through mechanical completion and into commissioning. Key responsibilities for the Contract Completion Engineer, East Yorkshire: Preparation and management of Construction Completion Check Records (CCCRs) Compilation of system and sub-system completion packs and handover dossiers Coordination of walkdowns with Construction, QA/QC, Commissioning and Client teams Management of punch lists, deficiency registers and completion trackers Supporting Mechanical Completion certification and project handover activities Reviewing and interpreting engineering documentation including P&IDs, Isometrics, GA Drawings, Vendor Documentation and ITPs Tracking system readiness and reporting completion progress against project schedules Key skills required - Completion Engineer, East Yorkshire: Previous experience within Completion Engineering, Mechanical Completion, Commissioning, QA/QC or Project Handover activities Experience working on industrial process plants, chemical, petrochemical, fertiliser, power generation or similar heavy engineering projects Ability to interpret engineering drawings and technical documentation Strong document control and completion dossier experience Excellent coordination and communication skills across multidisciplinary project teams Familiarity with completion systems, punch-list management and handover processes If you are an experienced Contract Completion Engineer looking to contribute to a major industrial project and play a key role in delivering a successful plant handover, we would love to hear from you. For more information or to apply, please contact Kieran Pratt, quoting Ref: KDP1059, via email at or call 01582 878832 JBRP1_UKTJ

Company description: Mller UK & Ireland is wholly owned by the Unternehmensgruppe Theo Mller which employs over 24,000 people throughout Europe. In the UK, Mller develops, manufactures and markets a wide range of branded and private label dairy products made with milk from more than 1,700 British farmers. The Mller brand is in The Grocers Top 100 list of Britains Biggest Brands, and is also the 7th most chosen brand in the UK. Job description: We are seeking an Engineering Technician to join us at our Manchester Dairy As an Engineering Technician youll provide safe front line reactive maintenance. Actively identify root cause and bring the equipment back in to service as quickly as possible as well as actively seeking and identifying cost effective improvements to site assets and equipment, improving efficiency and reliability. Engineering Technician (Dairy) Manchester Permanent contract: 4 on 4 off (2 days & 2 nights, 7-7) Key responsibilities as an Engineering Technician: • To ensure effective handover of information across shift, • Uses PMS to support prioritisation and problem solving (RCFA), • To diagnose faults and to test , repair and maintain Mechanical / Electrical equipment, • To observe, recognise and report on machinery or component defects or symptoms of impending failure and provide CMMS data, • Contact OEM's and other suppliers for technical support as and when required and expedite parts when not available on site, • Lead shift based problem solving where corrective actions aren't clear, • Working as ONE TEAM with First Line Response Technician, • Coaching of operators with asset care tasks, • Identify & implement Improvements, • Identify life cycle issues and raise these with possible recommendations, • Use and support simple 5WHY OE techniques / RCA techniques through to 100 year fix, • Use and support departmental 5s programmes for workshops and stores What were looking for: • Recognised apprenticeship, • Experience within maintenance, • Manufacturing Industry Experience, • Mechanical/Electrical Biased, • ONC/HNC, • IOSHH / Nebosh Desirable, • Electrical qualification, • Multiskilled engineer experience Please note this is a 4 on 4 off Shift role Days/Nights rotating (2 Days 2 Nights) Whats in it for you? • Competitive salary, • Generous annual leave allowance (276 hours), • Access to Muller Rewards Platform, • Long term career with a company that invests in you!, • Career development and defined pathways, • Onsite car park, • Supportive team environment, • Life assurance, • Pension scheme, • 5% annual bonus (company target dependant) At Mller, were committed to creating an inclusive workplace where everyone feels they belong. We welcome applications from all backgrounds and encourage people to apply even if they dont meet every requirement listed. If you need reasonable adjustments at any stage of the recruitment process, please let us know - were happy to support you. #hiring JBRP1_UKTJ

Product Architect / Project Lead (Embedded Instrumentation) Location: North East England Salary / Package: £70-90K A well-established R&D-led manufacturer of professional electronic instruments is seeking a Product Architect to lead the development of complex new products from concept through to production. This is a hands-on technical leadership role, combining system architecture and project leadership with direct involvement in embedded development. You'll lead multidisciplinary engineering teams across firmware, hardware, mechanical and software, working in close partnership with Product Management to translate market and customer requirements into deliverable engineering plans and successful products. Key responsibilities • Lead engineering teams through all phases of product development, from concept to production release, • Define and own system architecture for integrated products spanning embedded firmware, hardware interfaces, mechanical design and software tooling, • Manage day-to-day technical execution, resolving cross-functional dependencies and technical challenges, • Contribute hands-on to embedded software development, including design, coding, debugging and validation, • Work with Project Managers to develop schedules, manage risk and track progress against milestones, • Ensure thorough system verification and validation, with a focus on accuracy, robustness and compliance, • Support design transfer into manufacturing, including test fixtures, documentation and production ramp-up, • Provide mentorship and technical leadership across the engineering team Essential skills and experience, • Bachelor's or master's degree in Electrical/Electronic Engineering, Computer Engineering or a related discipline, • 10+ years in embedded systems development, ideally within precision instrumentation or measurement products, • Strong project management skills with a proven track record of leading product development projects to completion, • Proficient in C/C++, with a strong understanding of microcontroller-based and real-time embedded systems, • Skilled in schematic capture and PCB layout, • Experience working within an electronics manufacturing environment, • Comfortable working with Product Managers to define features, prioritise trade-offs and iterate on prototypes, • Experienced with Git, Azure DevOps, JIRA and similar collaborative development tools, • Strong interpersonal and communication skills in cross-disciplinary technical environments Desirable, • Hands-on experience with measurement and instrumentation principles, • Familiarity with calibration techniques, traceability requirements and lab standards, • Knowledge of compliance testing (EMC, safety) and certification processes, • Experience with test automation, embedded Linux or wireless communication protocols, • Prior work with contract manufacturers or third-party design partners Why apply A genuinely hands-on architecture and leadership role in a collaborative, technically demanding R&D environment, building products that professionals rely on. You'll have real influence over both the technical roadmap and product strategy. You may have previously held the following roles. Embedded Systems Engineer, Senior Firmware Engineer, Hardware Design Engineer, Electronics Design Engineer, Embedded Software Team Lead, R&D Engineering Manager, Technical Lead, Principal Embedded Engineer, Electronic Design, Systems Architect, Product Development Lead or Instrumentation Engineer, and you are now looking to step into a broader architecture and leadership position while staying hands-on. JBRP1_UKTJ

Multi skilled Site-Based CNC Engineer Location: Samlesbury (single large site) Type: Full time, permanent Salary: £42,000 to £45,000 DOE Hours: Mon to Thu 08:00 to 18:00, Fri 08:00 to 15:30. Total 45 hours with 7.5 hours/week guaranteed overtime Package : 27.5 days holiday plus all UK bank holidays, 7% pension contribution, tools provided Training & culture: Strong learning culture with UK and international training. Longstanding on-site contract of 30+ years and a track record of no redundancies. Team expected to grow Role overview Site-based CNC maintenance and service across a wide range of OEM machines, working with a very supportive technical team. Initial focus is servicing and breakdowns. As training is completed, scope expands to recommissioning, retrofits and installations. Salary progression reflects added skills and responsibilities. Key responsibilities • Electrical and mechanical diagnostics and breakdown response on CNC assets, • Planned service to schedule with clear fault histories and parts lists, • Fault diagnosis on spindles, ball screws, linear guides, bearings, way covers and coolant systems, • Precision alignment and geometry checks. Lubrication and guarding maintenance, • Safety testing for e-stops, interlocks, light curtains and guard circuits, • Basic controls support: parameter checks, backups and restorations, • Accurate CMMS updates, shift handovers and customer sign-offs Must-have requirements • Siemens CNC background with 840D and 840D power/solution line, • Hands-on experience working on 4-axis CNC machines as a minimum, • Time-served or formally qualified in electrical or electro-mechanical engineering, • Proven CNC machine tool maintenance in a production environment, • Confident reading electrical schematics and using meter/scope for fault-finding, • Right to work in the UK Nice to have • Safety relay or PLC basics. Inverter and servo drive experience, • Spindle rebuilds or ballscrew and linear guide replacement exposure, • Hydraulics and pneumatics fundamentals for cross-functional triage How to apply: Send your CV and a short note on a recent Siemens 840D fault you diagnosed, the steps taken and outcome. SER-IN JBRP1_UKTJ

The Opportunity: Field Service Engineer Contract: Permanent Location: Heysham Port The Briggs Equipment Group is a leading provider of asset management and maintenance solutions across the UK and Ireland. If you don't feel like you meet all of the role criteria outlined below please don't let that discourage you from applying. The Impact you will have: • Attending customer locations to determine the likely scope of the work required, assessing and agreeing with the end user his/her work priorities, ensuring safe working practices are adhered to., • Both at outset and as work progresses, liaise with controller and customer on the range of expected work providing clarity and understanding by all parties the likely timescales and associated costs are understood., • Identifying the root cause of a breakdown in a timely manner and ensure the correct parts are obtained in the most cost-effective way. Use any available resources to achieve this, including when required the Briggs Technical team, • Ensuring all work complies with engineering standards and, as relevant, Briggs/manufacturer specification/tolerances., • Carrying out inspection/checks on own work as it proceeds and ensuring that the equipment performs satisfactorily and is safe before handing back to the customer., • Identifying any further work required on a machine and ensure the customer is made aware of the fact, especially where a cost to the customer is to be incurred. The engineer should ensure that they maximise and potential revenue for equipment that has been damaged., • Completing all related job and service documentation is correctly, with necessary signatures/documents obtained from the customer. What will help you to excel in this role: • Relevant technical qualification, • Previous experience within a similar role, • Good understanding of hydraulic, mechanical and electrical principals, • The ability to work independently and under pressure, • The ability to manage and prioritise workload, • Understanding customer needs What you can expect from us: • 40 hour working week, • Overtime is Monday – Saturday and x2 on Sunday, • 25 days holiday with the ability to buy an extra 3 days, • Vehicle is available for private use if desired (tax to be paid), • Future development and career opportunities, • Contributory pension scheme with employer contributions up to 6%, • Profitshare bonus based on business performance, • Paycare and eyecare health scheme, • High street discounts What's next • If you are interested in joining the Briggs Group then please click on the apply now button and a member of the team will be in touch, • Not sure if this is the right role for you? Please feel free to visit the careers page on our website and send us your CV speculatively for a member of the team to review, • If you require any reasonable adjustments to assist you in the interview process, then please contact a member of the Recruitment team and inform them prior to attending so we can ensure these are met JBRP1_UKTJ

WELCOME TO LINAKER For over 30 years, Linaker has built a reputation for delivering dependable, high-quality mechanical engineering services across a wide range of client environments. Our strength lies in keeping critical systems operationalsupporting organisations with technical precision, responsive maintenance, and long-term reliability. Founded on trust, care, and reliability, were more than a service providerwere a fully embedded partner in our clients operations. ABOUT THE ROLE As a HVAC / Gas multiskilled Engineer, you will be part of our National engineering team, responsible for delivering planned and reactive maintenance across a range of commercial and retail sites. You will ensure HVAC / Gas systems operate safely, efficiently, and in full compliance with statutory and client requirements. WHAT YOU WILL BE RESPONSIBLE FOR WITHIN YOUR SPECIFIED AREA Planned Preventative Maintenance (PPM) Carry out PPM tasks in line with SFG20, statutory requirements, and contract specifications. Maintain and service HVAC and gas plant including: Commercial gas boilers and heaters AHUs, FCUs, VRV/VRF, split systems Pumps, valves, fans, controls, and associated plant Ensure all works are completed proactively, efficiently, and to the required standard. Reactive Maintenance & Fault Finding Diagnose faults across both HVAC and gas systems, completing repairs within SLA requirements. Minimise downtime through effective troubleshooting and first-time fix focus. Escalate complex issues to the helpdesk or Contract Manager where appropriate. Compliance & Health & Safety Ensure all gas works are completed in accordance with Gas Safe regulations and current legislation. Ensure HVAC works comply with F-Gas regulations, manufacturer guidance, and company procedures. Maintain site logbooks and ensure accurate compliance documentation is completed and uploaded via the CAFM system. Work strictly in accordance with company H&S policies, RAMS, and statutory requirements. Quotations & Remedial Works Identify remedial works and produce accurate, commercially sound quotations, including: Correct parts identification Realistic labour allowances Clear scope and methodology Communication & Client Liaison Communicate professionally with clients, helpdesk, supervisors, and contract managers. Provide clear updates on works completed, defects identified, and follow-on actions required. Always act as a professional ambassador for Linaker. Asset, Van & Equipment Management Maintain van stock, tools, test equipment, and calibration devices. Ensure company assets are stored, maintained, and reported correctly. Participate in the on-call rota where applicable. WHAT WE ARE LOOKING FOR Essential Gas Qualifications NVQ Level 3 in Air Conditioning & Refrigeration / HVAC (or equivalent) F-Gas Category 1 Good electrical and mechanical fault-finding skills City & Guilds COCN1 Core Commercial Gas Safety CCN1 Core Domestic Natural Gas Safety CDGA1 Non-Domestic Natural Gas & LPG Direct Fired Heating Appliances CODNCO1 Changeover Domestic to Non-Domestic Core CIGA1 Non-Domestic Indirect Gas-Fired Heating Appliances CPA1 Combustion Performance Analysis CENWAT Domestic Central Heating/Hot Water Boilers ICPN1 Non-Domestic Pipework & Fittings TPCP1 / TPCP1A Testing & Purging ACRIB Gold Skills Card (Desirable) Understanding of F-Gas compliance and environmental regulations. Air Source Heat Pump (ASHP) or Ground Source Heat Pump (GSHP) (Preferred) Experience with larger complex sites, or critical plant systems (e.g. chillers, large AHUs, Boilers). Desirable Qualifications CKR1 Domestic Gas Cooking Appliances CCCN1 Non-Domestic Catering Appliances HTR1 Domestic Gas Fires & Wall Heaters CORT1 Radiant Plaque & Tube Heaters Legionella Awareness & Practical Training Asbestos Awareness PASMA IPAF 3a & 3b Experience 25 years experience in commercial gas maintenance. Experience within a mobile FM environment desirable. Strong diagnostic and fault-finding capability Proven commercial HVAC / Gas maintenance experience Good electrical and mechanical fault-finding skills Full UK Driving Licence Strong understanding of Health & Safety ACRIB Gold Skills Card (Desirable) Understanding of F-Gas compliance and environmental regulations. Electrical qualification or knowledge Asbestos awareness (Desirable) Experience working under the SFG20 framework for maintenance schedules. Experience with larger complex sites, or critical plant systems (e.g. chillers, large AHUs). 5 Years Industry Experience in similar position (Preferred) Air Source Heat Pump (ASHP) or Ground Source Heat Pump (GSHP) (Preferred) Take part in the on-call rota THE PACKAGE 25 Days annual leave plus bank holidays. Buy and sell holiday to suit your schedule. One paid volunteering day per year, empowering you to support causes that matter to you. Company Van for site travel. Access to our Employee assistant programme for wellbeing support. Auto enrolment in the company pension scheme. Full training by a supportive friendly team. Annual events. INTERESTED This is a fantastic opportunity to lead and develop a team of engineers in a business thats growing fast and investing in talent. If youre ready to step into a pivotal role, influence outcomes, and build something meaningful, wed love to hear from you. If you think youre a match, get in touch today EQUAL OPPORTUNITIES Linaker Limited is an equal opportunities employer committed to diversity and inclusion. We welcome Applications from all suitably qualified persons regardless of their race, sex, disability, religion/belief, sexual orientation, or age. JBRP1_UKTJ

Mobile Electrical Engineer Manchester £45,000 + Van, Fuel Card, Overtime & Benefits We're partnering with a national, award winning, Mechanical & Electrical business, with over 500 colleagues across the UK and a turnover in excess of £150m, they are a genuine industry leader. They are recruiting for a Mobile Electrical Engineer to work on a key contract in Manchester (local to the airport) with occasional travel to other commercial sites in West Yorkshire and the Midlands. The role is focused on planned and reactive electrical maintenance in addition toin addition to testing and inspection of electrical systems & EICRs, as such candidates looking to apply need to have their 2391/Inspection & Testing qualification as well as 18th Edition and City & Guilds Level 3. To find out more please apply via this advert and a member of the Facilitate Search team will contact you to discuss the details in full. This is a genuinely excellent opportunity for the right candidate with a strong electrical background and the ability to build positive relationships with colleagues and clients. JBRP1_UKTJ

Engineering Supervisor Portsmouth | Full Time | Permanent | Days Are you an Engineering Supervisor or Team Leader ready to step into a bigger leadership role? This is an excellent opportunity to join a successful and growing international organisation that genuinely invests in its people, supports career progression and encourages continuous improvement. The business operates within a fast-paced industrial environment and is recognised globally for its commitment to sustainability, operational excellence and employee development. As Engineering Supervisor, you will lead and develop a team of engineers, driving performance, reliability and continuous improvement across the site. This role is ideal for an ambitious engineer looking to progress their management career within a highly supportive business. The Role Lead and organise the engineering team to deliver high performance and maximum equipment efficiency Manage planned and reactive maintenance activities through the CMMS system Drive Health & Safety standards and engineering compliance across the site Support continuous improvement, machine reliability and OEE initiatives Work closely with production teams to minimise downtime and improve operational performance Manage contractors, engineering budgets, spare parts and maintenance records Coach and develop engineers and apprentices within the team Support CAPEX projects, machinery upgrades and sustainability initiatives About You Experience within manufacturing, FMCG, processing or industrial environments Strong electrical and mechanical fault-finding skills Knowledge of pneumatics, hydraulics, electrical systems and automated machinery Previous experience leading or supervising engineers Strong communication and problem-solving skills Proactive, hands-on and motivated to progress your career Experience using CMMS systems and maintaining engineering records Desirable IOSH or NEBOSH 18th Edition / BS7671 Lean, 5S or Six Sigma experience Steam systems or industrial laundry experience CAPEX or project engineering exposure Why Join? Genuine career progression opportunities Stable and growing international business Strong people-focused culture Ongoing training and development Opportunity to influence change and drive improvements Supportive leadership team and collaborative environment If you are an ambitious engineering professional looking to take the next step into management, this is a fantastic opportunity to build a long-term career with a business that values its people and promotes from within. Barker Ross Group values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. We encourage and welcome applications from all sections of society and are more than happy to discuss reasonable adjustments and/or additional arrangements as required to support your application. For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business. JBRP1_UKTJ

A contract position Outside IR35 Hybrid working - 3 days p/w on site typically A Senior Mechanical Design Engineer specialising in New Product Introduction (NPI) on a contract basis. This is a unique opportunity to apply your expertise in mechanical design engineering to shape the next generation of advanced automotive components. Key Responsibilities: Clean-sheet mechanical design and development of rotating electrical machines, transmissions and drivetrains. Design work may also include pumps, fans, power electronics and batteries as required. Exploration, design development, prototyping and testing of concepts. Mechanical analysis of conceptual designs (including CAE), demonstrating a strong understanding of likely component failure modes and material strengths. Build and test of prototype hardware and test rigs as necessary. Build and strengthen the company's position within key markets by bringing industry-leading products from prototype through to production. Individually lead or contribute as a senior member within a team to deliver projects to internal or customer specifications. Utilisation of best-in-class simulation software as part of the development process to optimise and analyse product behaviour. 3D CAD modelling and 2D engineering drawings of components and assemblies. Work with other design engineers and the wider cross-functional department to deliver programs. Work to company and industry quality standards. Job Requirements: Degree in mechanical engineering or a closely related discipline Experience in mechanical design engineering Strong capability in 3D CAD modelling and 2D engineering drawings Experience using analytical methods (hand calculations and/or CAE tools such as ANSYS or Matlab) Proven experience applying DFM, DFA, DFMEA and PFMEA Experience working with and managing external suppliers Desirable: It would be beneficial (but not essential) if in addition to the above you also had: Autodesk Inventor and/or SolidWorks experience Working knowledge of MASTA or KISSsoft software Experience in high volume manufacturing - gravity or high-pressure casting part design Directly relevant design experience (previous motor, gear, transmission, spline or bearing life calculation experience) Experience working within a manufacturing environment

?? Electrical & Control Design Engineer - Contract Opportunity ?? Are you an experienced Electrical & Control Design Engineer looking to work on cutting-edge subsea technology? We're supporting a market-leading engineering organisation at the forefront of remotely operated subsea vehicle development and are looking for a talented engineer to join their team on an initial 6-month contract. ?? Newcastle ?? £45-£55 per hour ?? Outside IR35 ?? Initial 6-month contract with potential extension ?? What You'll Be Doing Design, develop, test, and commission advanced electrical and control systems for world-class subsea vehicles and equipment. Take ownership of projects throughout the full engineering lifecycle, from concept and specification through to commissioning, customer acceptance, and field support. Develop and implement PLC, HMI, and SCADA solutions while supporting electrical system integration activities. Participate in Factory Acceptance Testing (FAT), Site Acceptance Testing (SAT), and commissioning activities. Collaborate with multidisciplinary teams including mechanical, hydraulic, electrical, and software engineers to deliver innovative engineering solutions. Drive improvements in system performance, reliability, and maintainability across a range of exciting projects. ? What We're Looking For Proven experience in electrical and control system design. Strong PLC programming experience, ideally with Siemens S7 or Allen Bradley platforms. Experience with HMI and SCADA development. Ability to work across the full project lifecycle in a highly technical engineering environment. Previous experience within offshore, subsea, marine, industrial automation, or special-purpose machinery sectors would be highly advantageous. This is an excellent opportunity to join a highly respected engineering business working on some of the most technically advanced subsea systems in the industry. Interested? Get in touch with Alex at JAM to discuss the role in more detail. TPBN1_UKTJ

Mechanical Engineering Lecturer Location: Newcastle Contract: Full-Time, Permanent Salary: £TBC (dependent on experience) Start Date: ASAP Were supporting a leading education provider in Newcastle who are looking to appoint a Mechanical Engineering Lecturer . This is an excellent opportunity for an experienced engineer who wants to move into teaching, training, or mentoring the next generation of engineers. The organisation is open to candidates without prior teaching experience full support and training can be provided. The Role You will deliver high-quality teaching across: Level 2 & Level 3 Engineering programmes Apprenticeships Potential HE delivery (depending on qualifications and experience) This is a hands-on role ideal for someone who enjoys developing others and sharing practical industry knowledge. What Theyre Looking For Essential: Strong practical industry experience in one or more of the following: Mechanical Engineering Manufacturing Engineering Maintenance Engineering Production Engineering CNC / Machining Fabrication & Welding Multi-skilled Engineering Apprenticeship / Workshop Supervision Engineering Training / Mentoring A passion for developing learners and passing on industry skills Right to work in the UK Preferred: HNC/HND in a relevant engineering discipline Teaching qualification (desirable but not essential ) Full support can be provided for candidates transitioning from industry Why This Role Appeals to Industry Engineers Opportunity to step away from shifts, call-outs, and reactive workloads Structured working hours Strong job security Full training and development into teaching A chance to shape the next generation of engineers TPBN1_UKTJ

Maintain accurate contractual records and site administration in accordance with contract and regulatory requirements. Lead procurement strategies and subcontractor management: run tendering, negotiate packages, and manage supplier performance and delivery. Develop integrated project programmes and

At Barchester, we are offering a rare opportunity for an experienced IT Project Manager to join us in a new permanent position.In this role, you will be responsible for managing the full lifecycle of IT projectsensuring delivery on time, within budget, and to a high-quality standard.You will work cl

We are recruiting on behalf of a leading mechanical and electrical contractor based in Lincolnshire. Your responsibilities will include developing and maintaining project schedules, budgets, and resource plans, coordinating with clients, contractors, and other stakeholders, and ensuring all project

Trainee Project Manager Programme – No Experience Needed.Future-proof your career in Project Management – starting today.Looking for a career change? Maybe you’re already working but want a more technical role with better long-term prospects.Or you could be between jobs and ready for a fresh s

Prepare work specifications, building contracts and progress reports. Appoint and manage external teams of consultants and contractors. Demonstrable skills and knowledge in project planning, design, contract procurement and construction methodologies.

Average of One day on site per week in the South West - but maybe two days at the start of the contract.

As a Service Desk Engineer, you will be an integral part of the IT team, supporting the delivery of their managed services. Service Desk Engineer (1st–2nd Line). Our client is looking for a motivated and enthusiastic Service Desk Engineer to join their growing managed services team.

We are looking for a Jnr - Mid Level Project Manager with IT software and tech experience to join a vibrant company in New Castle.Supporting integration delivery activities for a project or series of work packages, ensuring appropriate input from a range of internal stakeholders and external supplie

Project Manager - Retail Business .Hybrid with occasional travel to offices in central Lincoln.Day rate up to £550 per day inside IR35.Strong experience across both infrastructure and software projects required.Planned start date - July/August 2026.A successful retail business is looking for a

Contract Project Manager - IT Service Transition. We're looking for an experienced Contract Project Manager to lead a high-profile IT Service Transition as part of a wider transformation programme.

Digital Project Manager – £38kLytham St Annes - Hybrid - 12 month FTC.Project Management, IT Projects, eCommerce, Stakeholder Management, Web Tech, Software Development projects, UAT.This advanced team based in Lytham St Annes are looking to add a Project Manager to their Digital and Brand team.Y

Contract (Outside IR35) | 6 Months Initally | Remote/ flexible hybrid in Devon.

NHS Project Manager – 9 Month Contract – Essex / East of England.

Project Manager - Chatbot Implementation - Insurance.Surrey- Twice a month (As and when required).IR35 (Umbrella engagement only).This sits within a large contact strategy programme.Initial phase has focused on telephony which is nearing completion.Next phase moves into chatbot and AI capability whi

We are looking for a Project Manager to support one of our NHS Customers in the South of England.As part of their EPR Optimisation Programme they require a PM to manage the SystmOne Enhancement Workstreams.Must have a good understanding of SystmOne within a Community Health Trust environment with ex

You will ensure that all contract requirements, safety standards are fully met.

Assembler|Machinery|SPM|Special Purpose Machinery|Technical Support|Training|Welder|Fabricator|Welding|TIG|MIG|ARC|STICK|MMA|Fitter|Mechanical|Technician|Engineer|Manufacturing|Manufacturer|Manufactured|York|Yorkshire|Pocklington|Melbourne|Market Weighton|Shipton Thorpe. Mechanical Technician - Trai

Field Service Engineer – South East. Requirements for a successful Field Service Engineer – South East. We recruit for permanent, temporary, and contract roles across multiple sectors.