Offres mechanical maintenance engineer à CheltenhamCréer des alertes d'emploi

Multi-Skilled Maintenance Engineer required in Cheltenham, Salary: £46,000 per annum, Hours: Weekly rotating 3-shift pattern covering 05:00am – 01:00am (8-hour shifts, 9 hours on site including 2 x 15-minute paid breaks and 1 x 30-minute unpaid break), full-time permanent contract, immediate start available following a successful interview process. Are you a Multi-Skilled Maintenance Engineer with strong electrical and mechanical fault-finding skills? We are looking for an experienced engineer to join a well-established manufacturing site in Cheltenham. This is a hands-on role within a fast-paced production environment, supporting site operations through breakdown response, planned maintenance and continuous improvement initiatives.The Role As a Multi-Skilled Maintenance Engineer, you will be responsible for maintaining and repairing a wide range of production and site equipment to ensure minimal downtime and consistent output. You will work closely with production teams, applying fault-finding skills across electrical, mechanical and pneumatic systems. The ability to read and understand electrical and pneumatic drawings is a core requirement of this role.Key Responsibilities: • Provide reactive breakdown support across the site, • Carry out planned preventative maintenance (PPM), • Diagnose and repair faults on electrical and mechanical systems, • Work on motors, gearboxes, conveyors, chain drives, pumps and bearings, • Read and interpret electrical and pneumatic schematics, • Support production teams to maintain output and efficiency, • Maintain high standards of health & safety and housekeeping, • Support continuous improvement and engineering projects as requiredCandidate Requirements:, • Multi-skilled maintenance engineer (approximately 60/40 mechanical or electrical bias either way), • Minimum 5 years’ experience in a fast-paced engineering or production environment, • Strong electrical and mechanical fault-finding capability, • Experience working with single-phase and three-phase electrical systems, • Working knowledge of PLC-controlled machinery, • Basic knowledge of inverters and control systems, • Pneumatics experience, • Ability to read and understand electrical and pneumatic drawings, • Relevant engineering and/or electrical qualifications, • Good understanding of health & safetyDesirable Experience:, • Steam boilers, • Steam and condensate systems, • Heat exchangers, • Water treatment or soft water systemsWhat’s on Offer:, • £46,000 per annum, • Full-time, permanent position, • Weekly rotating 3-shift pattern, • Stable role within a well-established manufacturing environmentInterested? Apply online today or contact Pertemps Gloucester, Unit 4A, Elmbridge Court, Cheltenham Road East, Gloucester, GL3 1JZ. Open Monday to Friday, 08:00 – 17:00. Call for more information.

Role: Maintenance Engineer Location: Cheltenham Salary: £40,000 Shift: 6am – 2pm (6am – 12.30pm on Friday) Benefits: flexible working and excellent benefits including 27 days holiday allowance before bank holidays), 3 days’ paid volunteering leave, comprehensive private healthcare, enhanced pension plan, life assurance, optional participation in a Share Ownership Plan, free onsite parking. This market leading engineering company are recruiting for an experienced Maintenance Engineer to join their site in Cheltenham. The company manufacture and supply a range of specialist products to various industries across the globe. Responsibilities: • Electrical & Mechanical repair & preventative maintenance of all machinery, electrical equipment & factory services to a high standard in accordance with manufacturers specifications., • Mechanical and/or Electrical/electronic fault finding and repair on all production equipment including CNC & PLC controlled machinery., • Support the Maintenance Team Leader/Sub Section Leader with planning & implementing preventative maintenance schedules & TPM activities., • Improve the reliability of machinery & equipment., • Assist with the Management of Contractors., • Fully support the Maintenance Management team, delivery of the departmental strategy and associated Key Performance Indicators (KPI’s)., • Ensure CMMS data is kept up to date., • Boiler Operation and Energy Centre Maintenance., • Understand and comply with Company Environment, Health and Safety (EHS) practices, identify areas for improvement and support related initiatives, • Understand and comply with the Company Core Values, • Engage, suggest and contribute to continuous improvement initiatives and projects, as required, • Flexible to complete other duties when required Requirements: • Proven experience in Maintenance Engineering, • Multiskilled, Mechanical or Electrical Apprenticeship qualified to ONC or equivalent NVQ., • Experience of PLC’s, CNC, Hydraulics, Pneumatics & Industrial Control.F, • Effective fault-finding skills., • Experience of working in a production environment, • Understanding of operating and applying safe environment, health and safety (EHS) practices For further details, please contact Nick Sollis – 01453 829767 or email your cv Omega Resource Group are an employment agency specialising in opportunities at all levels within the Engineering, Aerospace, Automotive, Electronics, Defence, Scientific, Oil & Gas, Construction and Manufacturing sectors. We are always seeking Engineering Staff, Senior Managers, Skilled and Semi-Skilled Machinists, Mechanical Fitters, Electrical Fitters, Quality Engineers, Materials Science Engineers, Maintenance Engineers, Electronics Engineers, Test Technicians, Technical Authors and Laboratory Technicians to name but a few.

This company is looking for a talented Multi-Skilled Maintenance Engineer to join their Engineering Team in Gloucestershire. Time served Apprenticeship in mechanical engineering discipline, coupled with experience working a Multi-Skilled Maintenance Engineer role. Multi-Skilled Maintenance Engineer.

My client is an industry leader within the Fluid Power sector having been established over 40 years they have concreted themselves as one of the largest distributors of fluid power products in the UK, supplying various industries. They are now looking to add an experienced Hydraulic Service Engineer to their engineering team working from their site in Gloucester. As part of the engineering team you will be covering the surrounding area attending sites to conduct maintenance, repairs and installations of hydraulic equipment. Do not wait to apply after reading this description a high application volume is expected for this opportunity. Being a confident and competent engineer, you will be focusing on fault finding, PPM and component replacements. Hydraulic Service Engineer Gloucester £32,000 - £40,000 (DOE), Bonus, 25 days holiday plus Bank Holidays, pension, life insurance Role This role requires strong diagnostic skills, hands-on mechanical expertise, and the ability to manage paperwork, communicate with clients, and follow safety regulations for equipment like pumps, cylinders, valves, and hydraulic power packs. Key Responsibilities Conduct planned preventative maintenance (PPM), emergency repairs, and installations of hydraulic equipment such as presses, pumps, valves, actuators, and cylinders. Use diagnostic skills to identify and resolve faults in complex mechanical and hydraulic systems, which often involves inspecting components and assemblies. Service and repair power packs, perform re-bagging of accumulators, and manufacture hydraulic hoses. Work at customer sites across various industries and perform tasks in a workshop, including stripping and rebuilding hydraulic components. Maintain accurate records, prepare service reports, safety documents, and asset management data. Provide technical advice to customers on system improvements and assist with risk assessments for site work. Follow company procedures, industry standards, and relevant safety regulations during all work activities. Essential Skills & Experience Mechanical Aptitude: Proven diagnostic and repair skills in mechanical and hydraulic systems. Hydraulics Knowledge: A strong understanding of hydraulics and fluid power, including the ability to read hydraulic circuit diagrams. Technical Documentation: Ability to prepare work files, work instructions, and detailed reports. Customer Service: Excellent communication and client-facing skills. Compliance: Adherence to strict safety and quality requirements. Other Skills: A valid driving licence, proficiency with Microsoft Office, and excellent organizational skills are also required. This is a fantastic opportunity to join an industry leading company within the Fluid Power sector who are striving to grow and develop within the market. xrnqpay If you are looking for an opportunity to learn, develop and progress. This is for you. If you are interested in this position, then call Tom Brocklehurst on the listed number or ideally email with your current CV. ser-in

Job Role: Field Service Engineer (Heavy Plant) Find out if this opportunity is a good fit by reading all of the information that follows below. Location: Guildford, Surrey Salary: £38,000–£42,000 base salary + paid door to door (OTE £45,000–£50,000+) Hours: Monday–Friday 07:00–16:00 (flexible hours) + Company Vehicle/Fuel Card + Overtime @ 1.5x Job Type: Full-time, Permanent The Client: Interaction Technical is proud to be working in partnership with a global leader in the manufacture of specialist vehicles and equipment for road sweeping, gritting, and airport runway clearance. With a strong reputation for innovation and reliability due expanding its UK engineering team and is seeking experienced Mobile Plant Engineers to join their growing operation. This is a fantastic opportunity to join a forward-thinking company that offers full training, career progression, and a supportive team environment. The Package: • Door to door paid with all travel time and expenses paid for, • 32 days annual leave (including bank holidays), • Employer pension contribution at 4%, • Call out rota from October to March (1 in 4/5 weeks on call) - £145 call out allowance + additional £125 per Bank Holiday on call, • Occasional overnight stays required with accommodation and food paid for (£25 per night) + occasional trips abroad, • Life Assurance and Health Care Scheme, • Company van, fuel card, mobile phone, and laptop provided, • Salary Sacrifice Scheme for an additional 5 days annual leave, • Attend customer sites to carry out servicing, diagnostics, and repairs on specialist plant and municipal equipment, • Identify and resolve mechanical, electrical, and hydraulic faults efficiently, • Perform routine maintenance and safety inspections to ensure equipment reliability, • Provide technical advice and support to customers on equipment usage and upkeep, • Maintain accurate service records and documentation for all work completed, • Background in Plant, HGV, Automotive, or Agricultural engineering (essential), • Strong diagnostic skills across mechanical, electrical, and hydraulic systems, • Experience working with engines and fault-finding tools is advantageous, • Recognised engineering qualifications (NVQ, City & Guilds) are desirable, • Full UK Driving Licence is essential, • HGV licence preferred or willingness to obtain one (training support available) INDTE

The Maintenance Engineer Role: · Reactive and preventative maintenance · Multi skilled role working on laundry equipment · Varied mechanical work to include hydraulics and pneumatics · Varied electrical work to include single and 3 phase and PLC systems The Maintenance

Electrical Maintenance Engineer - FM Service Provider - South of England - Up to £45,000 Exciting opportunity to work for a family run FM service provider situated in Bristol & Birmingham. CBW are currently looking for a Electrical Maintenance Engineers to cover in the region of circa 8 commercial buildings located in South the South of England (Bristol & Birmingham). The successful candidates will be Electrically biased (C&G / NVQ) with a proven track record in commercial building maintenance. This is a Mobile position and will require the successful candidates to attend a number of sites where he or she will be required to carry out Reactive maintenance to electrical and mechanical plant with particular emphasis on electrical maintenance. In return the company is offering a competitive salary paying up to £45,000 per annum based on experience/qualifications, overtime and further training. The sites include Bristol & Birmingham, 2 Days in 1 location and 3 days in the other. Due to the location of the sites it would probably suit someone based in Gloucester or Tewkesbury. Key duties & Responsibilities • Emergency Lighting & Fire Alarm Maintenance, • Carry out Reactive maintenance, • Air Conditioning - Air Handling Units / Fan Coil Unit (Filter changes, cleaning), • BMS System - Monitor (i.e. Hot & Colds etc), • Tap Temps, • Ensuring log books are kept up to date, • Escorting specialist sub contractors<...

Role: Maintenance Engineer Location: Cheltenham Salary: £40,000 Shift: 6am – 2pm (6am – 12.30pm on Friday) Benefits: flexible working and excellent benefits including 27 days holiday allowance before bank holidays), 3 days’ paid volunteering leave, comprehensive private healthcare, enhanced pension plan, life assurance, optional participation in a Share Ownership Plan, free onsite parking. This market leading engineering company are recruiting for an experienced Maintenance Engineer to join their site in Cheltenham. The company manufacture and supply a range of specialist products to various industries across the globe. Responsibilities: Electrical & Mechanical repair & preventative maintenance of all machinery, electrical equipment & factory services to a high standard in accordance with manufacturers specifications. Mechanical and/or Electrical/electronic fault finding and repair on all production equipment including CNC & PLC controlled machinery. Support the Maintenance Team Leader/Sub Section Leader with planning & implementing preventative maintenance schedules & TPM activities. Improve the reliability of machinery & equipment. Assist with the Management of Contractors. Fully support the Maintenance Management team, delivery of the departmental strategy and associated Key Performance Indicators (KPI’s). Ensure CMMS data is kept up to date. Boile...

Multi-Skilled Maintenance Engineer – Cheltenham Salary: Up to £50,000 per annum Benefits Join our dynamic team at Cheltenham! We're excited to offer a full-time, permanent Maintenance Engineer positions, with fantastic opportunities for training and career development. Scroll down the page to see all associated job requirements, and any responsibilities successful candidates can expect. What We Offer: Competitive salary of up to £50,000 Pension scheme, Life Assurance, Employee Assistance Program (EAP) Recommend a Friend Bonus Scheme, Performance & Long Service Awards Extensive training and development opportunities 42.5-hour working week, Monday to Friday, with occasional weekend work Rotating shift pattern: Late shifts: 3:00 PM – 12:00 AM Mid shifts: 10:00 AM – 7:00 PM Early shifts: 5:00 AM – 2:00 PM Your Role: Reporting directly to the Engineering Manager, you will be instrumental in maintaining and troubleshooting our site's plant and equipment. Your responsibilities will include: Diagnosing faults across electrical, mechanical, pneumatic, hydraulic, and PLC systems to meet operational targets Performing timely repairs to minimize downtime Conducting planned preventative maintenance as scheduled Collaborating with production teams to ensure smooth operations Working alongside fellow engineers to uphold site reliability What We're Looking For: To succeed in this role, you should have: NVQ Level 3 in Electrical/Mechanical Engineering or equivalent, or completed an apprenticeship in mechanical, electrical, or control systems At least 5 years' experience in a fast-paced manufacturing or production environment – experience in a commercial laundry setting is a plus! xrnqpay A strong understanding of electrical and mechanical systems, including reading and interpreting electrical and pneumatic drawings Good IT skills and the ability to work effectively as part of a team A positive, proactive attitude and excellent communication skills in English Proof of Right to Work in the UK Please Note: We are looking for candidates with the right technical skills, especially the ability to read and understand electrical and pneumatic drawings. INDBRI

Electrical Maintenance Engineer - FM Service Provider - South of England - Up to £45,000 Exciting opportunity to work for a family run FM service provider situated in Bristol & Birmingham. CBW are currently looking for a Electrical Maintenance Engineers to cover in the region of circa 8 commercial buildings located in South the South of England (Bristol & Birmingham). The successful candidates will be Electrically biased (C&G / NVQ) with a proven track record in commercial building maintenance. This is a Mobile position and will require the successful candidates to attend a number of sites where he or she will be required to carry out Reactive maintenance to electrical and mechanical plant with particular emphasis on electrical maintenance. In return the company is offering a competitive salary paying up to £45,000 per annum based on experience/qualifications, overtime and further training. The sites include Bristol & Birmingham, 2 Days in 1 location and 3 days in the other. Due to the location of the sites it would probably suit someone based in Gloucester or Tewkesbury. Key duties & Responsibilities If you think you are the right match for the following opportunity, apply after reading the complete description. • Emergency Lighting & Fire Alarm Maintenance, • Carry out Reactive maintenance, • Air Conditioning - Air Handling Units / Fan Coil Unit (Filter changes, cleaning), • BMS System - Monitor (i.e. Hot & Colds etc), • Tap Temps, • Ensuring log books are kept up to date, • Escorting specialist sub contractors, • Assisting other engineers, • City & Guilds / NVQ in Electrical Level 2 & 3, • 17th or 18th Edition, • You must be able to provide copies of your trade certificates (Essential), • A proven track record in commercial building maintenance xrnqpay, • An understanding of commercial building maintenance, • Multi-skilled, • Good communication skills, • Excellent customer service skills, • Up to £45,000 (Based on experience / Qualifications), • Company Vehicle, • PDA's, • 20 days holiday + BH, • Overtime available, • Training and development opportunities, • Contributory pension schemePlease send your CV to Charlie Long at Cbw Staffing Solutions for more information

Vehicle Technician Have you got what it takes to succeed The following information should be read carefully by all candidates. Location:Gloucester Salary:£30,000 to £34,000 basic plus bonus and overtime, £50,000 OTE Hours:Monday to Friday 40 hours, 1 in 3 Saturday mornings on rota paid at overtime rate. Reference:29152 This is a fantastic opportunity for a Vehicle Technician to join our clients workshop based in Norwich. They are part of a renowned family run company with a fantastic reputation for progression and staff retention. The successful candidate will be responsible for diagnosing, repairing, and maintaining a variety of vehicles. This is a fantastic opportunity to work in renowned company renowned for offering excellent progression for their employees along with offering fantastic benefits. This position requires a strong understanding of automotive systems and the ability to use diagnostic tools and software to identify and resolve complex problems. The ideal candidate will have a passion for cars and a commitment to delivering high-quality work. Benefits for Vehicle Technicians • Uncapped bonus scheme (Techs regularly earn £12,000 plus), • Staff discounts on vehicles, servicing, parts and labour, • Manufacturer training+ clear career progression opportunities, • Paid day off for you birthdayRole Overview Vehicle Technician, • Perform vehicle servicing and general maintenance, • Diagnose faults and perform fault finding, • Repair and replace brakes, suspension, and clutch components, • You must hold Level 3 Light Vehicle Maintenance

Field Service Engineer If the following job requirements and experience match your skills, please ensure you apply promptly. Gloucester | UK Travel | Full-Time | Permanent £35,000 (OTE £42,000-£45,000) We are partnering with a specialist technical equipment provider to recruit a Field Service Engineer supporting advanced inspection, laboratory and materials testing systems across the UK. This position offers a high degree of autonomy, technical variety and the opportunity to work across diverse industrial and scientific environments. The Opportunity Operating from Gloucester, you will take ownership of field-based engineering activities, ensuring equipment is installed, maintained and calibrated to the highest operational and compliance standards. Your remit will include: * Installing and commissioning specialist inspection and processing systems * Carrying out preventative maintenance and reactive breakdown support * Performing calibration and verification tasks in line with technical standards * Diagnosing electrical and mechanical faults in the field * Managing service schedules and organising site visits independently * Maintaining accurate technical documentation and compliance records * Supporting spare parts management and field inventory control * Identifying opportunities for service improvements or equipment upgrades * Providing professional on-site customer support and technical guidance This role involves nationwide travel and regular engagement with manufacturing, engineering and laboratory environments. Candidate Profile We are seeking a practical, solutions-focused engineer with: * At least 2 years' hands-on technical service or maintenance experience * Electrical and/or mechanical fault-finding capability * Confidence reading technical drawings and working with diagnostic tools * Strong organisational skills and the ability to plan workloads independently * Clear communication skills and a professional customer-facing approach * Full UK driving licence Experience within inspection systems, laboratory equipment, NDT, or process machinery would be advantageous but is not essential. Package & Benefits * Competitive salary aligned to experience * Company vehicle or allowance * Laptop, mobile phone and necessary tooling * Structured manufacturer-led training * 39-hour working week (Monday-Friday) * Annual leave allowance increasing with service WR Engineering are the #1 recruitment partner for engineering, manufacturing & technical sales jobs. We recruit for permanent jobs UK wide. xrnqpay WR is acting as an Employment Agency in relation to this vacancy.

A leading recruitment agency is seeking a Mechanical Maintenance Engineer in Cheltenham. Offering competitive salary between £45,000 - £49,000 and benefits like flexitime and excellent training, this position is ideal for an engineer looking for a long-term career in a stable environment.

Maintenance Engineer sought to maintain manufacturing equipment with mechanical focus. Responsibilities include hydraulic, pneumatic, and robotic systems maintenance.

Multi-Skilled Maintenance Engineer £43,000 - £44,000 Monday - Thursday, Afternoons Cheltenham Overview This successful business stands as a prominent and well-established player in their respective industry, delivering high quality products throughout the United Kingdom. They are currently looking for a Multi-Skilled Maintenance Engineer to join their expanding team. As a Multi-Skilled Maintenance Engineer, what you'll be doing: Identifying failure modes of plant equipment and returning the equipment to operation safely and in a reasonable timescale. Diagnosing and repairing equipment breakdowns. To liaise with engineering day teams to identify and resolve long-term engineering issues. Locating spare parts using the maintenance management system. Collecting and returning spares to stores. Identifying failure modes of electrical equipment and making recommendations to prevent further failures. Obtaining maintenance schedules from the maintenance management system and feeding back work carried out. Work arising to be recorded using notifications. To carry out preventive maintenance routines, including the following: Working collaboratively with other Multi-Skilled Maintenance Engineer's to ensure Planned Preventative Maintenance is completed in line with scheduling. What we'll need from you: Significant experience within a Multi-Skilled Maintenance Engineer role within manufacturing. Constant drive, enthusiasm, and self-motivation with ability to motivate others. Ability to work under pressure. Accurate and timely reporting skills. Completed an apprenticeship as a Maintenance Engineer. Working knowledge of good engineering practices. NVQ level 3 in Electrical or Mechanical Engineering (or equivalent City & Guilds or HNC) or equivalent. What you'll get in return: Pension Contributios up to 10% (by employer). Shares Scheme Bonus Scheme Opportunity to work in a dynamic and professional environment. Opportunity for career growth and development. Generous leave entitlement. Yolk Recruitment is an equal opportunities employer and embraces diversity in our workforce. We employ the best people for the job at hand and actively encourage applications from all qualified candidates, regardless of gender, age, race, religion, sexual orientation, disability, educational background, parental status, gender identity or any other protected characteristic. We champion and celebrate diversity at Yolk allowing our team to bring their whole selves to work. *Please note, whilst we do our best to contact all candidates, due to the high number of applications we receive we cannot guarantee this for every role. If you have not heard anything from us within 7 days of applying - then unfortunately you have been unsuccessful. Please keep an eye on our website for more opportunities. TPBN1_UKTJ

Position: LCV Technician Location: Cheltenham Salary: upto £40,000 basic + bonus (circa £100 per month) Hours: Monday–Friday 8.00am-5.30pm (45 hrs) Shift M-F Days LCV Technician / Mechanic / Engineer Opportunity Looking for a vehicle technician role that offers excellent pay, real career progression, and a genuine work–life balance? This is a fantastic opportunity to join an independent, well established (20 years +) modern, fast-growing automotive workshop where your skills are valued, your development is supported, and your weekends are your own. Heavily invested in training, technology, and equipment, the business is fully accredited and committed to maintaining the highest standards across all operations. The DVSA-approved garage and test centre provides MOTs (Class 4, 5 & 7), servicing, diagnostics, repairs, and fleet maintenance for local and national customers. All roles benefit from the following Birthday off work and paid volunteer leave Monday to Friday only – no weekends, bank holidays or call outs Fully funded EV training and qualifications MOT Tester training and certification supported Comprehensive training and development package. Long-term career progression with new qualifications Full uniform provided Free gym membership Cycle to work scheme Free annual flu jab and Health & wellbeing programme On-site parkingThe Role as an LCV Technician / Mechanic / Engineer As a Vehicle Technician, you’ll play a key role in delivering high-quality servicing, diagnostics, and repairs on cars and light commercial vehicles. You’ll work in a well-equipped workshop, using modern diagnostic equipment and tools, while maintaining excellent safety and quality standards. You will be working on an internal fleet of small vans to 3.5t Lutons with tail lifts, retail and commercial work to include all makes / models of cars and vans Key Responsibilities of the LCV Technician / Mechanic / Engineer Carry out vehicle inspections to identify faults and repair requirements Perform routine servicing and maintenance, including brakes, tyres, and oil changes Diagnose mechanical and electrical faults using diagnostic equipment Repair or replace vehicle components using hand and power tools Complete accurate job records and documentation Work collaboratively with colleagues to meet deadlines and maintain workflow Maintain a clean, safe, and organised working environment What we’re looking for in the LCV Technician / Mechanic / Engineer Level 2 or Level 3 Vehicle Technician qualification (Level 4 welcomed) Strong diagnostic and mechanical repair experience Experience with cars and vans MOT Tester qualification (preferred but not essential) Full UK driving licence Positive attitude, strong work ethic, and team-focused mindset Ability to work to deadlines without compromising qualityIf you’re a skilled LCV Technician / Mechanic / Engineer looking for stability, progression, and a workplace that genuinely invests in its people, this role offers an excellent next step in your career. INDPB

Multi-Skilled Maintenance Engineer Cheltenham – Permanent – Full-time – Days – Salary £45-£50k Are you a hands-on, multi-skilled Maintenance Engineer looking for a stable, days-based role within a fast-paced manufacturing environment? We’re supporting a well-established production site in Cheltenham that is investing in its engineering function and now looking to appoint two Multi-Skilled Maintenance Engineers to strengthen the team. This role plays a critical part in maintaining plant reliability, reducing downtime, and supporting production performance across a varied and technically interesting site. The Role · Electrical and mechanical fault finding on production plant and equipment · Reactive maintenance and breakdown response to minimise downtime · Planned preventative maintenance (PPM) in line with site schedules · Working closely with production teams to maintain output and efficiency · Supporting continuous improvement of equipment reliability and performance · Collaborating effectively with other engineers on site · Maintaining high standards of safety, compliance, and housekeeping The Person: · NVQ Level 3 in Electrical or Mechanical Engineering (or equivalent) · Completed apprenticeship (mechanical, electrical, or controls) · Minimum 5 years’ experience in a fast-paced manufacturing or production environment · Strong multi-skilled background (electrical & mechanical) · Experience fault-finding across electrical, mechanical, pneumatic, hydraulic and PLC systems · A proactive, team-oriented approach with good communication skills Desirable: · Experience within FMCG, or high-volume production environments · Exposure to structured maintenance systems and improvement activity Apply Today: To apply, send your CV to (url removed) or call George Jackson on (phone number removed) / (phone number removed). IMT acts as an employment agency for permanent recruitment and an employment business for the supply of temporary workers

FM33264 CHP Field Engineer £39,740 Basic Salary + £4,128 South Weighting South M4 Based Alecto Recruitment is working with a leading company in the power generation and renewable energy sector, who are seeking a CHP Field Engineer to support the operation, maintenance, and optimisation of generator assets across multiple sites. This is a regional role with travel across the UK and occasional stayaways, offering a hands-on position within a growing and technically diverse environment. Benefits On-call payment of up to £2,000 pa. Overtime available up to 8 hours per week. Pension (5.5% employer, 3.5% employee contributions). Annual Company Performance-related bonus scheme. Gas safe and 18th Edition certificates available.Key Responsibilities & Tasks Carry out planned and reactive maintenance, fault finding, and repair on CHP plant, generators, and associated electrical and mechanical systems. Support installation, commissioning, and integration of new equipment and sites. Assist and guide Operations staff with servicing, breakdowns, and routine maintenance. Maintain and inspect plant including pumps, motors, PV systems, energy storage, and heat equipment. Ensure compliance with HSQE standards, company procedures, and legislation. Manage spare parts, stock control, and complete all required documentation and records. Participate in on-call rota and respond to emergency breakdowns when required. Monitor site performance, support audits, and handle environmental responsibilities including incident response. Supervise contractors and represent the company professionally on site.Skills & Requirements Electrical qualification or relevant engineering experience. Strong knowledge of electrical, mechanical, and heat systems maintenance. Experience with control systems (12V DC - 415V AC). Proven fault finding and diagnostic ability. Gas Safe certification (or willingness to obtain). 18th Edition qualification (or willingness to achieve). Experience with CHP, gas engines, PV, energy storage or HVAC systems desirable. Full UK driving licence and basic IT skills required.INDW To apply for this role please send your CV to (url removed) or call (phone number removed) ext 220 to discuss. Equally, if this role would not be of interest to you but may be for a suitable friend or colleague, we can offer paid referral fees for successful placements

Multi-Skilled Maintenance Engineer £38,000 - £39,000 Monday - Friday, Days Cheltenham Overview This successful business stands as a prominent and well-established player in their respective industry, delivering high quality products throughout the United Kingdom. They are currently looking for a Multi-Skilled Maintenance Engineer to join their expanding team. As a Multi-Skilled Maintenance Engineer, what you'll be doing: Identifying failure modes of plant equipment and returning the equipment to operation safely and in a reasonable timescale. Diagnosing and repairing equipment breakdowns. To liaise with engineering day teams to identify and resolve long-term engineering issues. Locating spare parts using the maintenance management system. Collecting and returning spares to stores. Identifying failure modes of electrical equipment and making recommendations to prevent further failures. Obtaining maintenance schedules from the maintenance management system and feeding back work carried out. Work arising to be recorded using notifications. To carry out preventive maintenance routines, including the following: Working collaboratively with other Multi-Skilled Maintenance Engineer's to ensure Planned Preventative Maintenance is completed in line with scheduling. What we'll need from you: Significant experience within a Multi-Skilled Maintenance Engineer role within manufacturing. Constant drive, enthusiasm, and self-motivation with ability to motivate others. Ability to work under pressure. Accurate and timely reporting skills. Completed an apprenticeship as a Maintenance Engineer. Working knowledge of good engineering practices. NVQ level 3 in Electrical or Mechanical Engineering (or equivalent City & Guilds or HNC) or equivalent. What you'll get in return: Pension Contributios up to 10% (by employer). Shares Scheme Bonus Scheme Opportunity to work in a dynamic and professional environment. Opportunity for career growth and development. Generous leave entitlement. Yolk Recruitment is an equal opportunities employer and embraces diversity in our workforce. We employ the best people for the job at hand and actively encourage applications from all qualified candidates, regardless of gender, age, race, religion, sexual orientation, disability, educational background, parental status, gender identity or any other protected characteristic. We champion and celebrate diversity at Yolk allowing our team to bring their whole selves to work. *Please note, whilst we do our best to contact all candidates, due to the high number of applications we receive we cannot guarantee this for every role. If you have not heard anything from us within 7 days of applying - then unfortunately you have been unsuccessful. Please keep an eye on our website for more opportunities

CNC Service Engineer £45000 - £50,000 + up to £10,000 Bonus, Car, 5% Pension, Private Healthcare, Life Insurance Due to an internal promotion and continued growth, our client is expanding their established service team and has an exciting opportunity for a Service Engineer. We welcome applications from experienced engineers with a strong background in CNC service, as well as ambitious engineers looking to further develop their careers within the sector. The position of CNC Service Engineer will include: • Reporting to the Service Manager, you will be responsible for working on multi-axis CNC lathes and sliding head machines., • Installation of CNC machines and bar feed equipment, • Attending breakdowns and diagnosing faults, • Mechanical, electrical and PLC fault finding, • Repairs, servicing and preventative maintenance, • Machine alignments and accuracy checks, • Reading and interpreting engineering and electrical drawings, • Providing telephone technical support to customers when required, • This is a field-based role requiring extensive travel across the UK and Eire, including regular nights away. The suitable candidate for CNC Service Engineer will need to possess the following skills and experience: • Strong mechanical and electrical knowledge, • Proven diagnostic fault-finding experience, • Working knowledge of pneumatic and hydraulic systems, • Experience with Fanuc control systems, • Experience working on multi-axis CNC lathes (essential), • Sliding head experience (advantageous – full product training provided), • Good customer service and communication skills, • Strong IT skills, • Full UK driving licence What’s in It for You? • £45,000 – £50,000 basic salary, • £6,000 – £10,000 annual bonus, • Company car, • 5% employer pension contribution, • Private healthcare, • Life insurance, • Ongoing training and technical development, • A stable, supportive and growing service team Due to our high vacancy response rates, unfortunately, we are not able to reply to all applicants. If you have not had feedback from our consultants within 14 days, please accept that your application has not been successful. Cartisian Technical Recruitment are a specialist recruitment agency sourcing engineers for Automation, Scientific Technologies, Automotive, General Engineering & Manufacturing sectors

Position: Mechanical Maintenance Technician Location: Gloucester Salary: £47,000 Shift: Monday - Friday (8 Hour Shifts) About the Role We are currently seeking a Mechanical Maintenance Engineer to join a well-established and successful engineering team at a busy food manufacturing site. Key

Commercial Gas / Combustion Service Engineer M4 Corridor & South West Up to £48,000 Basic + Tesla Model 3 + Door-to-Door Pay £900 Standby | 1 in 12 Call-Out | 40 Hours We are recruiting for a leading industrial maintenance provider delivering specialist services across combustion, boiler, and process plant systems within sectors such as manufacturing, food & beverage, and pharmaceuticals. Due to continued growth, we are seeking an experienced Commercial Gas / Combustion Engineer to join a highly skilled field-based team covering the South West. What’s on Offer • Up to £48,000 basic salary, • Tesla Model 3 company vehicle (all engineers), • Door-to-door travel pay, • £900 standby payment (1 in 12 call-out rota), • 33 days holiday (including bank holidays), • Overtime available, • Ongoing training and specialist upskilling Key Responsibilities • Service, maintenance, and repair of industrial combustion systems and gas equipment including Dunphy, Riello, NuWay, SAACKE and Cochran., • Fault finding, diagnostics, and breakdown response, • Testing and performance monitoring of equipment, • Completion of digital service reports and compliance documentation, • Identifying remedial works and energy efficiency improvements, • Building strong working relationships with clients on-site Requirements • Commercial Gas qualifications (COCN1, ICPN1, CIGA1, CORT1), • Strong background in combustion / industrial gas systems, • Experience working in plant rooms or process environments, • Electrical and mechanical fault-finding capability, • Full UK driving licence, • Flexible to travel and participate in call-out rota Apply now with your CV for a conversation with Kieran

Position: Commercial Gas Engineer Location: Midlands/South West Salary: Up to £50,000 DOE Commercial Gas Engineer - Job Overview Commercial Gas Engineers required in the Midlands/South West. Our client offers their customers a complete turnkey solution for the installation, service, maintenance, fault finding and repair on a range of HVAC solutions including commercial boilers, heating systems, mechanical plant equipment, air conditioning and chillers. Their client base consists of long-standing client relationships with clients such as David Lloyd Leisure, Vue Cinemas, Cineworld, Tate & Lyle, Radisson Hotels, Hilton, Malmaison & more. Commercial Gas Engineer - Salary & Benefits Basic Salary up to £50k DOE Company Van - Optional Personal Use of the vehicle Profit share scheme applicable after 12 months' service - Up to £3,600 tax free Overtime paid at 5x 40 hour working week, travel paid after 30 mins each way On call allowance (1 in 4/5, £1,200 guaranteed - if called out Travel Paid door to door) Pension 22 days' holidays plus bank holidays this will increase to 25 days after 5 years and30 days after 10 years. Company uniform, phone & PDA Commercial Gas Engineer Position Overview The Commercial Gas Engineer must hold valid ACS Commercial Gas Tickets and be able to cover the region for the clients listed above with day-to-day tasks including planned and reactive service and maintenance visits as well as responding to breakdowns, performing fault finding tasks and carrying out repairs to Commercial Boilers, Commercial Gas appliances, General Plant Room/Mechanical equipment. Commercial Gas Engineer - Job Requirements Commercial Gas Tickets (CODNCO1, ICPN1, CIGA1, CORT1, CDGA1) NVQ in Heating & Ventilation Full drivers' Licence Live in the Midlands/South West regionBennett and Game Recruitment are a multi-disciplined technical recruitment agency based in Chichester, West Sussex operating across the UK with specialist teams covering a range of industries. We are acting as a Recruitment Agency in relation to this vacancy, and in accordance with GDPR by applying you are granting us consent to process your data, contact you about the services we offer, and submit your CV for the role you have applied for

Generator Engineer Swindon | Gloucestershire | Full Time | Permanent A well-established engineering services provider is seeking a Generator Engineer to join its South West team based in Bristol. This is a full-time, permanent position supporting a diverse client base across the region. Reporting to the Regional Service Manager, the successful candidate will deliver maintenance, installation, fault diagnosis, repair and testing services across diesel generator sets, switchgear, control systems and associated equipment. Work will be carried out both at customer sites and company service locations. Key Responsibilities * Carrying out Planned Preventative Maintenance (PPM) on diesel generators and associated equipment * Performing diagnostics, testing and remedial repairs * Providing call-out support for generator breakdowns on a rota basis * Attending client sites to carry out servicing and technical support * Forecasting and identifying spare parts requirements for planned works Skills & Experience * Minimum 2 years’ experience within generator engineering or a similar field * Strong mechanical diagnostic and fault-finding experience * Qualified Mechanical Engineer or equivalent technical background * Ability to produce accurate technical reports with strong attention to detail * Comfortable working independently and managing site-based work Salary & Benefits * £38,000 - £44,000 salary package + OT + On Call Pay (1 in 5) * Flexible working arrangements * Contributory pension scheme * 22 days holiday (increasing to 25 days after year one) plus Bank Holidays * Opportunity to develop professionally within an experienced engineering team * Exposure to a varied and technically interesting client portfolio

Maintenance Engineer – Multiskilled (Elec Bias) Cheltenham – Permanent – Full-time – Days (6-14) Salary £42,000 Are you a proactive Maintenance Engineer with strong fault-finding skills and experience across CNC machinery, PLC systems, and industrial plant equipment? We’re looking for a hands-on engineer to join a dynamic maintenance team at a leading high-volume manufacturing facility. This is a key role responsible for ensuring machinery uptime, supporting TPM initiatives, and contributing to long-term reliability improvements across a wide range of production equipment. The Role: · Carry out electrical and mechanical fault finding, repair and preventative maintenance on CNC, PLC-controlled machinery, and factory services · Support and help deliver planned maintenance schedules (TPM and CMMS-based) · Maintain boilers and energy centre equipment (training provided if needed) · Improve plant reliability and support root cause analysis for downtime events · Assist with contractor management and ensure high standards of safety and compliance · Keep maintenance records and data up to date in the CMMS system · Support wider improvement projects and work collaboratively with production and engineering teams · Drive your own development and support training across the team when required The Person: · Multiskilled background with Mechanical or Electrical apprenticeship (ONC / NVQ Level 3 or equivalent) · Experience in a manufacturing/production environment · Good working knowledge of CNC, PLC, hydraulics, pneumatics, and industrial controls · Familiarity with CMMS (Computerised Maintenance Management Systems) · Strong diagnostic skills and attention to detail · A proactive and flexible mindset – team-oriented with the ability to work independently · Good computer literacy and time management Desirable: · BOAS-certified or previous boiler operation experience · Understanding of continuous improvement methods (Six Sigma, 5Y, etc.) · Experience leading or training within maintenance teams · Ability to deputise for a Team Leader when needed The Benefits: · Join a stable, high-performance maintenance team within a modern production site · Opportunities for ongoing training and development (including boiler certification) · Be part of a business committed to safety, performance, and continuous improvement · Competitive salary, shift allowance (if applicable), and Excellent benefits package Apply Today: To apply, send your CV to (url removed) or call George Jackson on (phone number removed) / (phone number removed). IMT acts as an employment agency for permanent recruitment and an employment business for the supply of temporary workers

Role: Process Engineer Location: Cheltenham Salary: £42,000 - £45,000 Day Shift: 8am – 5pm (12.30pm finish on Friday) Benefits: flexible working and excellent benefits including 27 days holiday allowance (before bank holidays), 3 days’ paid volunteering leave, comprehensive private healthcare, enhanced pension plan, life assurance, optional participation in a Share Ownership Plan, free onsite parking. Overview: This market leading engineering company are recruiting for a Process Engineer to join their site in Cheltenham. The company manufacture and supply a range of specialist products to various industries across the globe. To be a contributor of the Process Engineering team, delivering support to production environments and progressing projects. Responsibilities: To undertake support for the production areas ensuring Safe and efficient manufacturing To be involved and lead general projects and improvement activities to enhance our products and manufacturing processes Employ Lean and Agile techniques to all activities delivering cost efficiency Working with the Lead Engineer to deliver new technology and support capital Investment projects Support the introduction of equipment and or processes from concept stage to the production handover Implement “Future Factory” solutions that guarantee manufacturing capability and capacity to meet demand Support and drive improvement for the ongoing pursuit of Quality across Assembly and operations Strong communication with all stakeholders, suppliers and contractors Requirements: Technical Engineering background Welding background would be benefical Experience in Lean and Agile manufacturing techniques Knowledge of Assembly and machining processes An understanding of project management Worked in fast paced diverse manufacturing environment Working to and achieving targets, using project management tools For further details, please contact Nick Sollis – (phone number removed) or email your cv (url removed) Omega Resource Group are an employment agency specialising in opportunities at all levels within the Engineering, Aerospace, Automotive, Electronics, Defence, Scientific, Oil & Gas, Construction and Manufacturing sectors. We are always seeking Engineering Staff, Senior Managers, Skilled and Semi-Skilled Machinists, Mechanical Fitters, Electrical Fitters, Quality Engineers, Materials Science Engineers, Maintenance Engineers, Electronics Engineers, Test Technicians, Technical Authors and Laboratory Technicians to name but a few. Omega is an employment agency specialising in opportunities at all levels within the Engineering, Manufacturing, Aerospace, Automotive, Electronics, Defence, Scientific, Energy & Renewables and Tech sectors

CNC Maintenance Engineer – Multiskilled Cheltenham – Permanent – Full-time – 6-14 Shift - Salary £42k Are you a proactive Maintenance Engineer with strong fault-finding skills and experience across CNC machinery? We’re looking for a hands-on engineer to join a dynamic maintenance team at a leading high-volume manufacturing facility. This is a key role responsible for ensuring machinery uptime, supporting TPM initiatives, and contributing to long-term reliability improvements across a wide range of production equipment. The Role: · Carry out electrical and mechanical fault finding, repair and preventative maintenance on CNC, industrial machinery, and factory services · Support and help deliver planned maintenance schedules (TPM and CMMS-based) · Maintain boilers and energy centre equipment (training provided if needed) · Improve plant reliability and support root cause analysis for downtime events · Assist with contractor management and ensure high standards of safety and compliance · Keep maintenance records and data up to date in the CMMS system · Support wider improvement projects and work collaboratively with production and engineering teams · Drive your own development and support training across the team when required The Person: · Multiskilled background with Mechanical or Electrical apprenticeship (ONC / NVQ Level 3 or equivalent) · Experience in a manufacturing/production environment · Good working knowledge of CNC and industrial controls · Familiarity with CMMS (Computerised Maintenance Management Systems) · Strong diagnostic skills and attention to detail · A proactive and flexible mindset – team-oriented with the ability to work independently · Good computer literacy and time management The Benefits: · Join a stable, high-performance maintenance team within a modern production site · Opportunities for ongoing training and development (including boiler certification) · Be part of a business committed to safety, performance, and continuous improvement · Competitive salary and Excellent benefits package Apply Today: To apply, send your CV to (url removed) or call George Jackson on (phone number removed) / (phone number removed). IMT acts as an employment agency for permanent recruitment and an employment business for the supply of temporary workers

Field Service Engineer (LOLER) £32,000 + Training + Vehicle + Phone + Benefits + Progression + Overtime West Of England, Ideally Located: Gloucester, Cheltenham, Worcester, Cirencester, Swindon, Chippenham, Bristol Are you a Field Service Engineer looking to work for a longstanding company where you will work on a Monday to Friday days basis, with minimal staying away covering a local patch? On offer is a position with an excellent work-life balance, flexible working hours, great benefits and a chance to progress your career. The company are well established within their field and specialise in the medical mobility field. They are now looking to expand their engineering team, making it a great time to get onboard. On offer is a Field Service Engineer role where you will service and install a wide range of care home equipment. This role would suit a Field Service Engineer looking for a local patch where you will be part of a close-knit team and looking for favourable hours with good progression. The Role: To diagnose and repair electrical and mechanical faults on equipment LOLER Testing on lifting equipment Servicing and install baths, hoists, slings, beds, pressure mattresses and wheelchairs Mon - Fri 8:30am till 5:30pm The Person: Field Service Engineer. Electrical and Mechanical knowledge. LOLER testing experience. Field Service Engineer, Service, Repair, Maintenance, Engineering, Electrical, Hydraulics, Mechanical, Healthcare, LOLER, Lift, baths, Hoists, Beds, Reference Number: (phone number removed) To apply for this role or to be considered for further roles, please click "Apply Now" or contact Fred Sibley at Rise Technical Recruitment. Rise Technical Recruitment Ltd acts an employment agency for permanent roles and an employment business for temporary roles. The salary advertised is the bracket available for this position. The actual salary paid will be dependent on your level of experience, qualifications and skill set and will be decided by our client, the employer. Rise are not responsible or liable for any hiring decisions made by the end client. We are an equal opportunities company and welcome applications from all suitable candidates

Due to growth, they are now seeking an Mechanical Fitter / Mechanical Maintenance Engineer with good experience across planned preventative maintenance, breakdowns, project work and improvements would be most ideal. Mechanical Fitter / Mechanical Maintenance Engineer. This is a very exciting positio

Join a world-renowned aerospace and defence organisation as a Mechanical Maintenance Engineer in RAF Marham - 4 days a week onsite. Due to a drive for greater success, this advanced manufacturing business is currently searching for a Maintenance Engineer to add to their talented, hardworking team in

Anexcellent opportunity for a Mechanical Maintenance Engineer to join a Global Engineering Automation business with fantastic benefits and career progression. The rightMechanical Maintenance Engineer will support site maintenance and repairs within a site-based team environment, utilising a purpose-

We are looking to recruit experienced Mechanical Engineers to join our growing team at our manufacturing facility in Scunthorpe. Undertake fault finding, including working with PLCs, and carry out repairs using your mechanical engineering skills. Carry out both planned and reactive maintenance acros

Delivering planned, reactive, and corrective maintenance across mechanical systems, including chillers, AHUs, FCUs, boilers, pumps, VFDs, and DRUPS. Job Title: Mechanical Day Technician Data Centre London. Operating mechanical systems safely and efficiently, including isolations where required.

Mechanical Maintenance Engineer. SRG are seeking a proactive Mechanical Maintenance Engineer to join a successful and growing client based near Leeds, West Yorkshire. Accurately log activities, faults, and maintenance tasks, ensuring smooth shift handovers.

MultiSkilledEngineer #MaintenanceTechnician #MechanicalEngineer #FMCGJobs #EngineeringJobs. The successful candidate will be a Multi-Skilled Maintenance Engineer with a strong mechanical bias. As a Multi-Skilled Engineer, you will work as part of a team responsible for both mechanical and electrical

Job Title – Multi Skilled Maintenance Engineer (Mechanical Bias)Location – BedfordSalary: £35,000 - £38,000 + Overtime (£5,000 - £10,000 available annually)&

Mechanical Maintenance Engineer Salary: OTE £47,000 overtime Working Pattern: 4-day week (Monday-Friday rotation), 48-hour week Location: Commutable from Milton Keynes, Aylesbury, Luton, Leighton Buzzard, Dunstable, Buckingham, Hemel Hempstead, Bedford Profile We are seeking a Mechanical Maintenan

Role:Mechanical Fitter / Mechanical Maintenance EngineerSalary:£40,000 to £43,000 per annum + Benefits including annual Bonus, Christmas Vouchers, Employers 8% pension contributions (no contributions needed from employee, saving you approx.

Salary: £50,OTE: £60,000+Benefits: 10% Pension, generous holiday allowance, excellent overtime opportunitiesTraining Available: Various OEM certificates and qualifications including, Multi Skilled training, Siemens PLC and robotics training

Maintenance Engineer (Mechanical) Blackpool £38,000 (£42,500 OTE) + Training + Progression + Days Only + Overtime + Company Benefits Are you a time-served Mechanical Maintenance Engineer looking to build a long-term career working on complex rides and attractions at one of Blackpool's most iconic

A leading maintenance services provider is recruiting for a Multi-skilled shift Maintenance Engineer to join their team at Stansted Airport. The ideal candidate will have experience in both electrical and mechanical maintenance, be adept at fault finding, and have a minimum Level 3 qualification.

Mechanical Maintenance Engineer. Are you a Mechanical Maintenance Engineer looking to join an industry recognised company working in a luxury environment with full on the job training and excellent long term progression opportunities?. This is a fantastic opportunity for an engineer with a Mechanica

Maintenance Engineer, Breakdown engineer, Industrial engineer, Industrial electrician, Multiskilled Engineer, Field Service Engineer. Due to continuous growth, our client is now looking to add a Multi‑Skilled Maintenance Engineer to their busy engineering team. Job role: Maintenance Engineer.

A leading recruitment agency seeks a Maintenance Engineer in London Docklands, offering a salary between £40,000 and £44,000, OTE up to £60,000, plus overtime and additional benefits. The ideal candidate will have experience servicing mechanical and hydraulic machinery, a full UK driver's license

A leading recruitment agency is seeking a Mechanical Maintenance Engineer for a permanent night shift role at a manufacturing facility in Essex. Ideal candidates will have strong mechanical skills and the ability to work independently on nights. The role focuses on delivering high-quality maintenanc