Trabajos part time electrical engineering en LiverpoolCrear alertas

EC&I Technician Full time, Permanent, On site Location – Daldowie Salary £43,459.08 Closing date:20 January Who we are: We’re not just talking about making a difference, we’re making it happen. We generate dispatchable, renewable power and create stable energy in an uncertain world. Building on our proud heritage, we have ambition to become the global leader in sustainable biomass and carbon removals. You’ll be joining our teams of practical doers, future thinkers and business champions. We’re enabling a zero carbon, lower cost energy future for all, and working hard to decarbonise the planet for generations to come. About the role: As an EC&I Technician, you’ll provide electrical, control and instrumentation support to the plant mainly focussed on planned and unplanned maintenance activities. You’ll also provide some support on modification and replacement projects. Based in Uddingston near Glasgow, Daldowie Treatment Works is one of the largest plants of its type in Europe. For nearly 25 years the plant has focussed on creating wdf pellets from sewage sludge reducing environmental impacts as well as creating a new fuel source replacing the need to burn fossil fuels. Day to day you’ll support the process by providing timely repairs to breakdowns and carrying out planned maintenance activities including instrumentation calibrations. You’ll ensure that all work is managed and recorded correctly to maintain compliance, inspiring safe ways of working across the site, setting a high standard of EC&I engineering activity, and supporting in rolling out new processes, systems, and ways of working to your colleagues on site. You’ll be joining a tight knit, dedicated team based on site, who are also part of a larger group with a wide support network. Who we’re looking for: You’ll need to have experience in solving problems and being a strong communicator to be able to persuade and influence others. You should be educated to at least ONC level in Electrical or Instrumentation Engineering and should have served a recognised Apprenticeship. Specifically, you’ll need plant experience in the maintenance, repair and installation of electrical equipment, including but not restricted to, 3 phase motors and associated switchgear, variable speed drives, soft starts, circuit breakers, motor control centres and 3 phase and single-phase distribution systems. You’ll be able interpret schematic drawings, single line diagrams and PLC ladder logic. Ideally, you’ll also have process plant experience in the maintenance, repair, installation and calibration of plant instrumentation and control systems including, but not restricted to, systems for the measurement of temperature, pressure, level, flow, oxygen, and ph. Rewards and benefits: As you help us to shape the future, we’ve shaped our rewards and benefits to help you thrive and support your lifestyle. If successful in this role you’ll get: · A discretionary bonus depending on company performance · SAYE (Sharesave): discretionary scheme from time to time · Personal accident cover · Group personal pension plan · Holiday - 36 days · Reimbursement of the cost of your annual membership of one relevant and appropriate professional body We’re committed to making a tangible impact on the climate challenge we all face. Drax is where your individual purpose can work alongside your career drive. We work as part of a team that shares a passion for doing what’s right for the future. With Drax you can shape your career and a future for generations to come. Together, we make it happen. At Drax, we’re committed to fostering an environment where everyone feels valued and respected, regardless of their role. To make this a reality, we actively work to better represent the communities we operate in, foster inclusion, and establish fair processes. Through these actions, we build the trust needed for all colleagues at Drax to contribute their perspectives and talents, no matter their background. Find out more about our approach here. How to apply: Think this role’s for you? Click the ‘apply now’ button to begin your Drax journey. If you want to find out more about Drax, check out our LinkedIn page to see our latest news. We understand that you may have some additional questions about the role. If you’d like to have a confidential chat to discuss the role in more detail, please email We reserve the right to close roles early when the particular role and / or location has had sufficient applications.

About Hydrokem Aerosols Ltd: Hydrokem Aerosols are located on the Wirral and specialise in the manufacture of aerosol and bag on valve products. We supply to a wide range of market sectors including personal care, healthcare/medical devices, veterinary, household, automotive and technical. Hydrokem Aerosols is a part of Clinimed Holding Limited, a group of companies founded in 1982 following the acquisition and formation of number of additional companies within the group. Job Summary: As a Project Engineer, you will play a crucial role in overseeing and managing various engineering projects. Reporting to the Site Project Manager, you will work closely and collaboratively with cross functional teams. You will scope, plan, implement and successfully complete engineering projects within budget of varying scale, complexities, and technologies on time in full. You will be responsible for the management and implementation of key projects in the packing and process area. Benefits: • Contributory Pension Scheme (5% Employer Contribution, Increasing up to 10% with Service), • Medical Cash Back Plan (Simply Health), • Life Assurance (4 x Annual Gross), • Annual Performance Bonus, • Annual Pay Review, • Onsite Free Car Parking, • Cycle to Work Scheme., • Employee Referral Scheme, • Employee Assistance Programme – Health & Wellbeing, • Training & Development Opportunities, • 25 Annual Holidays plus Bank Holidays and One Company Holiday (and Christmas Shutdown) Main Duties & Responsibilities: • To collaborate with team members to define project goals and objectives., • Develop project plans and schedules, ensuring adherence to the deadline. Oversee project execution, monitoring progress and adjusting as needed., • Ensure compliance to design criteria and standards, creating and reviewing designs and taking responsibility to document necessary processes., • Conduct feasibility studies, producing user requirement specifications, layout drawings, throughput calculations, cost estimates as well as developing engineering criteria., • Preparing tender evaluation documentation and capex proposals that provide good return on investment., • Conduct regular project meetings to communicate updates and address any issues., • Coordinate all project related activities between internal team and external vendors., • Effectively manage and foster good working relationships with Contractors and other third parties., • Manage project budgets including tracking expenditure and reviewing invoices to ensure on time in full delivery to budget., • Conduct risk assessments and implement strategies to mitigate potential risks., • Ensure compliance with current safety regulations and quality standards. Raising management of change procedures, URS and change controls when appropriate., • Prepare and present project reports to stakeholders highlighting key milestones and achievements., • Ensure stakeholder satisfaction through clear, professional communication, • Work closely with Safety, Operations, Quality and Technical teams to identify strategic opportunities to develop lean capabilities, maximise yields and reduce production costs through continuous improvement projects. Personal Specifications: • At least 5 years of experience in project engineering ideally in aerosol industry., • Solid understanding of Health and Safety compliance, Hazard Study Methodology, Risk Assessment, Permit to Work systems and CDM2015., • Good knowledge of mechanical and electrical engineering, instrumentation, and automation., • Proven ability to manage multiple projects in a manufacturing environment., • Hands-on operational experience, ideally within a multidisciplined FMCG environment., • Proven experience in project management tools and techniques, PMP or Prince 2 methodologies: experience with AutoCAD, able to interpret and design PFD’s, P&ID’s, Layout Drawings, MS office packages., • Knowledge of relevant industry codes and standards., • HNC or NVQ Level 3 in engineering or equivalent qualification., • Good organizational and planning skills with an ability to prioritise competing demands and manage own workload., • Able to manage multiple engineering projects concurrently with in-depth technical contribution., • Sound knowledge of 5S and TPM/WCM methodologies., • An excellent articulate communicator, with strong interpersonal skills., • Proven previous experience in stock control or inventory management., • Strong attention to detail with a high level of accuracy., • Ability to manage multiple tasks and meet deadlines., • Confident communicator, able to work effectively with internal teams and customers.

Senior M&E Engineer Highly Competitive Salary plus exceptional pension and annual leave The University of Liverpool is seeking to appoint an industry-leading Senior Building Services professional to take up a significant leadership and delivery opportunity. The University of Liverpool has a diverse and complex property portfolio, incorporated within the main Liverpool City Centre Campus and associated satellite sites. The Capital Projects Team (part of Property and Campus Services) has a key role in delivering and developing the campus buildings and engineering infrastructure of the University to support academic and professional services departments, based in 300 buildings (460,000 m2), across the 255-ha site. The Estate includes many listed buildings from the Georgian and Victorian periods as well as contemporary buildings and conservation areas coupled and with complex research laboratories this provides many challenges in maintaining and servicing the estate. Reporting to the Head of Engineering Services, the successful candidate will be employed within the Engineering Services Group providing professional mechanical & electrical engineering support to other building professionals both on Major Capital and Minor Projects, managing building services elements of schemes ranging from circa £25k to £120M. In this dynamic position, you’ll work closely with Capital and Minor Works Project Managers, Mechanical and Electrical Consultants, and Maintenance Surveyors to ensure projects are completed safely, on time, within budget, and to the highest standards. You will have a key role in ensuring quality assurance and co-ordinating the development of standard mechanical and electrical specifications in accordance with university policies. We are seeking an industry-leading candidate with significant experience in an engineering / building services project delivery role across a large, complex organisation with a broad range of core activities. With a background and professional qualification in building services, you will possess a proven track record understanding the fundamentals of engineering and applying them to a campus environment. Experience of educational/laboratory/technical environments would be a significant advantage, on mechanical and/or electrical installations which includes new build projects and refurbishment schemes in a variety of building types With excellent interpersonal, communication and presentation skills, the appointed candidate will possess the proven ability to operate successfully with a multitude of internal colleagues and external stakeholders. The candidate brochure can be viewed at: ___ To learn more please contact our retained search advisor David Craven ( / 07932717438) at MRG. Applications should consist of a CV and cover letter and should be submitted via out website ___ The University is committed to providing an environment which recognises and values people's differences, capitalises on the strengths that those differences bring to the institution and supports all staff and students in maximising their potential to succeed. We are committed to equality of opportunity, to being fair and inclusive, and to being a place where all belong. We therefore particularly encourage applications from candidates who are likely to be underrepresented in our workforce. These include people from Black, Asian and minority ethnic backgrounds, disabled people, LGBTQI+ people, and women.

Electrical Engineer Location: Home-based with travel Salary: £50,000 to £55,000 DOE Hours: Full-time Sector: Renewable Energy / Solar Power Be part of the clean energy revolution! Are you an experienced Electrical Engineer from a renewable energy background? Ready to take the next step in your career? If so, this could be the perfect opportunity for you. Belectric UK is seeking a talented Electrical Engineer to join our growing engineering team. In this role, you’ll play a key part in designing solar and energy storage solutions, supporting projects from initial sales discussions right through to construction and commissioning. This is your chance to make a meaningful impact within a forward‑thinking, industry leading renewable energy company. If you're passionate about sustainability and want your work to help shape a better world — we want to hear from you! What’s in it for you? At Belectric UK, you’ll be part of a passionate team committed to building a sustainable future. We offer a dynamic work environment, opportunities for growth, and the chance to make a real impact in the renewable energy sector. Competitive salary Bonus Full health cover & 4x Life Cover Up to 6% employer pension contribution 33 days holiday (including bank holidays) Top-tier IT equipment (laptop, mobile, etc.) What You’ll Be Doing • General electrical design activities for the DC and AC installation of solar farms and energy storage projects, • Substation layouts, SLD preparation, wiring schematics, cable sizing calculations, earthing layouts, protection scheme development, cable containment solutions, etc., • Ensure engineering designs are completed to planned timescales, • Reading design specifications and technical drawings, • Evaluating technical specifications in the tender documentation packages and reviewing risks and implications of the requirements, • Providing engineering and technical expertise and guidance in identifying, analysing and resolving project challenges, • Attend project progress meetings with engineering management, • Manage relationships and work with Technical Advisor on development sites but also ad hoc requirements, • Support of sales and purchasing with technical descriptions and datasheet validation, generation of balance of Materials BOM, • Support of the construction department in the implementation, in the project realisation phase including regular visits to projects throughout the construction phase, • Close exchange with colleagues in layout design, purchasing, project development, project management and the subsidiaries, • Preparation of as-built calculations and drawings package, • Technical documentation after completion of a project, • Interact with the Sales team and the rest of the engineering disciplines to integrate specifications into the design concept, • Support the company’s goals and represent the company positively and professionally, • Adhere to all Company policies/procedures and business ethics codes including the anti-bribery policy and QHSE policy. What We’re Looking For • HNC/HND or equivalent minimum; BSc, BEng or equivalent with an electrical or renewable engineering bias, • Experience in Solar PV Design, • Experience within renewables industry, energy storage either in consultancy, DNO, ICP, renewable energy developer, or alternatively another engineering environment, • Knowledge and understanding of international and UK electrical standards, • Knowledge of main players in the industry (TA’s, Investors, EPC, third-party labs etc), • Innovative spirit, • Ability to deal with ambiguity and problem solving, • Ability to build relationships with key internal and external stakeholders, • Excellent communication and presentation skills, • Structured and well-organised method of work Join a company that’s shaping the future of clean energy across the UK and Europe. If you’re ready to make an impact and grow in a dynamic, future-focused industry, apply today! 📩 Apply today and help power the future with Belectric UK!

Job title: Electronic Design Engineer Location: Reading/Glasgow sites available within hybrid working arrangements. Mission Akkodis, is a global leader in the engineering and R&D market that is leveraging the power of connected data to accelerate innovation and digital transformation. With a shared passion for technology and talent, 50,000 engineers and digital experts deliver deep cross-sector expertise in 30 countries across North America, EMEA and APAC. Akkodis offers broad industry experience, and strong know-how in key technology sectors such as mobility, software & technology services, robotics, testing, simulations, data security, AI & data analytics. The combined IT and engineering expertise brings a unique end-to-end solution offering, with four service lines – Consulting, Solutions, Talents and Academy – to support clients in rethinking their product development and business processes, improve productivity, minimize time to market and shape a smarter and more sustainable tomorrow. Akkodis is part of the Adecco Group and is a commercial brand under which both AKKA and Modis entities operate. Scope The Electronic Engineer develops integrated hardware solutions, both utilising COTS components and designing bespoke systems, through design, development, verification, and validation. In this role you will produce electrical interconnect designs, cable schedules, ICDs, wiring schedules, LV distributions, earth & bonding strategies, assess the impact of EMI / EMC, RoHS, REACH and LV Directive on the electrical designs, etc. Responsibilities • Satisfy the HW requirement set through design, development, and test activities., • Implement the hardware architecture in physical and electrical form, fit and function., • Support Manufacturing and Procurement during the build phase, i.e. respond to Problem Reports and implement Engineering Change Requests., • Define the Design Proving / Hardware Test Specifications and use these during qualification., • Define the EMC and Environmental Test Specifications and use these during qualification., • Design and develop any special test equipment to facilitate the above. Skills • General Electronic and Electrical Engineering (degree level)., • COTS AC and DC LV power supplies., • Designing with PCI, RS485/232, Hotlink and Ethernet interfaces., • Designing cables and harness assemblies, utilising military style connectors and backshells, such as MIL-DTL-38999., • An understanding of cable screening methods and military style cable construction methodologies., • Designing to meet EMC and environmental standards / requirements. Experience • Strong relevant experience of the Skills listed above or associated experience that can be applied to electronic, electrical and electro-mechanical design in a regulated industry., • Design and specification of COTS and bespoke sub-assemblies and equipment suitable for 19” racks / cabinets., • Interconnection Design (i.e. wiring harnesses, copper or fibre optical network interconnections, connector types, power distribution and data comms, spatial constraints, environmental considerations)., • Full engineering lifecycle experience (Capture, Design, Implementation, Test)., • Working with requirements in a structured and evidential manner., • Production of Design / Test Specifications and Test Reports.

Join Our Dynamic Team in the Pharmaceutical Industry! Are you an enthusiastic engineer with a passion for medical technology? Do you thrive in a fast-paced environment? If so, we have an exciting opportunity for you! Our client is seeking a Product Support Installations Engineer for a fixed-term contract of 6 months. This role offers a competitive daily rate ranging from £200 to £250. Key Responsibilities: • Undertake on-site support visits for installations, de-installations, and relocations of critical instruments., • Deliver high-quality installations while adhering to customer policies and safety standards., • Engage with customers to address queries and ensure effective communication with the wider business., • Maintain calibrated tools and equipment, ensuring compliance with service activities., • Provide first-level troubleshooting support, using your technical skills to solve issues promptly. What We’re Looking For: Essential Qualifications: • A qualified engineer in electrical engineering, medical technology, or a relevant Biomedical Science degree., • Full UK/EU driving licence and a valid passport for overseas training. Core Competencies: • Strong electrical, electronic, and mechanical understanding., • Proven ability to manage personal time and prioritise tasks effectively., • Excellent communication skills, both written and verbal, with a flair for teamwork and collaboration., • A logical, process-driven mindset with an attention to detail., • Enthusiastic about challenging technologies, including robotics and medical issues. Desirable Skills (but not essential): • Initial experience in a medical technical environment., • Familiarity with medical analytical systems and quality assurance., • Experience with Customer Relationship Management (CRM) tools and web delivery applications., • Customer-facing engineering support experience. Why Join Us? • Be part of a collaborative team that values integrity, courage, and passion., • Gain exposure to cutting-edge technologies in the diagnostics industry., • Opportunities for personal growth and professional development through structured training., • Enjoy a supportive work environment with a focus on continuous improvement. Who You Are: • A quick learner with a curious mind, eager to innovate and contribute ideas., • Resilient and adaptable, thriving in a changing environment., • Committed to achieving results and accountable for your commitments. Note: This position requires regular overnight stays throughout the UK and Ireland. Ready to Take the Next Step? If you’re excited about joining a team that makes a difference in the healthcare sector, we want to hear from you! Apply now to embark on a fulfilling journey with us. We use generative AI tools to support our candidate screening process. This helps us ensure a fair, consistent, and efficient experience for all applicants. Rest assured, all final decisions are made by our hiring team, and your application will be reviewed with care and attention. Adecco is a disability-confident employer. It is important to us that we run an inclusive and accessible recruitment process to support candidates of all backgrounds and all abilities to apply. Adecco is committed to building a supportive environment for you to explore the next steps in your career. If you require reasonable adjustments at any stage, please let us know and we will be happy to support you.

About the Company Akkodis is a global leader in engineering, technology, and R&D, harnessing the power of connected data to drive digital transformation and innovation for a smarter, more sustainable future. As part of the Adecco Group, Akkodis employs over 50,000 engineers and digital specialists across 30 countries in North America, EMEA, and APAC. Our teams bring extensive cross-sector knowledge in critical technology areas such as mobility, software services, robotics, simulations, cybersecurity, AI, and data analytics, enabling clients to tackle complex challenges in today’s rapidly evolving markets. With a comprehensive solution portfolio across four service lines—Consulting, Solutions, Talents, and Academy—Akkodis supports clients from concept through to full-scale deployment and optimisation. Our diverse offerings help organisations rethink product development, accelerate productivity, reduce time-to-market, and prepare for the future. At Akkodis, you’ll join a dynamic environment that values continuous learning and global collaboration, where you can make a meaningful impact through innovative projects that shape the future of technology. About the Role The FPGA Engineer will contribute to the development, recovery, and certification support of FPGA-based designs for aerospace platforms, with a strong focus on legacy systems and board bring-up activities. The scope includes reverse engineering existing FPGA implementations, developing firmware from hardware requirements, and supporting integration of FPGA designs onto new or existing boards. Responsibilities • Lead FPGA development for legacy aerospace designs, including reverse engineering, and board bring-up activities., • Develop firmware requirements from hardware requirements., • Work closely with hardware teams, supporting early-phase board design and integration., • Ensure designs and deliverables comply with DO-254 aligned processes., • Support generation of design/certification documentation (PHAC), verification strategy, and accreditation discussions (SOI) for low-complexity designs. Qualifications • Bachelor’s degree in Electronic Engineering, Electrical Engineering, Computer Engineering, or a related discipline. Required Skills • Strong FPGA experience using VHDL, including Xilinx or Microchip devices., • Proven experience working from limited or legacy design information., • Experience working in regulated aerospace or defence environments (DAL-D)., • Awareness of DO-254 or similar hardware certification standards is an advantage.

This role will require international travel to Australasia for extended periods of time. We are receiving multiple requests to support our partners in the Baggage Handling Sector. If you are experienced in BHS, and would be interested in international projects, then look no further. We are seeking a skilled Controls Engineer to support the commissioning of automated baggage handling systems. The successful candidate will work with Rockwell PLC platforms to develop, troubleshoot, and optimize control systems used within a fast-paced airport or logistics environment. This role involves close collaboration with mechanical engineers, maintenance teams, and operational staff to ensure system reliability, performance, and safety. Start: ASAP Role: Controls Engineer System (PLC): Rockwell Industry: Baggage Handling Systems Duration: Depending on project, between 9-18 months Location: most projects will be done internationally in Australasia Key Responsibilities • Design, develop, and maintain PLC control systems for automated baggage handling equipment using Rockwell systems., • Troubleshoot and resolve control system faults to minimize downtime and maintain operational performance., • Support commissioning and integration of conveyors, sortation equipment, scanners, and associated automation systems., • Modify and optimize PLC logic to improve system efficiency, reliability, and throughput., • Diagnose electrical and automation faults using engineering tools and system diagnostics., • Participate in system upgrades, expansions, and continuous improvement initiatives., • Work closely with maintenance teams to support operational issues and provide technical expertise., • Produce and maintain technical documentation including functional descriptions, I/O lists, and control narratives., • Ensure compliance with safety standards and operational procedures., • Provide on-site technical support during testing, commissioning, and operational phases. Required Skills and Experience • Degree or equivalent qualification in Electrical Engineering, Automation Engineering, or a related discipline., • Proven experience with PLC programming and troubleshooting using Rockwell control systems., • Experience working within airport baggage handling systems., • Strong understanding of industrial automation, control systems, and material handling equipment., • Ability to read and interpret electrical schematics and control system documentation., • Strong problem-solving skills and the ability to work under operational pressure., • Effective communication and teamwork skills., • You are okay with working internationally for longer periods of time Desirable / Beneficial Experience • Knowledge of conveyor and sortation control systems., • Experience with HMI and SCADA systems is beneficial., • Familiarity with industrial communication networks (EtherNet/IP, Profibus, Modbus, etc.)., • Experience with commissioning and system integration projects. Personal Attributes • Methodical and detail-oriented approach to engineering tasks., • Ability to work independently and as part of a multidisciplinary team., • Strong commitment to safety and operational excellence., • Flexible approach to working hours when supporting commissioning or operational requirements.

Associate HV Power Engineer - Data Centres & Power Sector High Voltage Systems, Substations, Transmission, Distribution, Grid Connections Manchester or Glasgow Competitive salary + employee ownership, benefits and long term progression Full-time permanent role This position sits within the growing UK power division of a major global engineering firm with deep capability in power, data centres, infrastructure and complex buildings. The organisation has a long established reputation in the American market and is now significantly expanding its UK and European presence. The UK power team is building depth across transmission, distribution, substations and grid connection work. This includes internal delivery for hyperscale data centre clients, international power groups and a wider pipeline as they expand further into the DNO, TSO and grid studies environment. The combined scale, technical pedigree and employee ownership model makes this a compelling environment for an ambitious engineer looking to develop into senior leadership. This is a moment in time where strong engineers can step into a team that is gaining momentum and directly influence how capability develops over the coming years. The Business The organisation operates globally across power, data centres, infrastructure and major building programmes. With operations across the United States, the United Kingdom and multiple European regions, the business brings significant global scale and technical depth. The power group is well established internationally with large teams delivering high voltage substations, transmission and distribution programmes, grid connections and power systems studies for utilities, large private clients and major developers. Much of this capability is now being replicated and scaled across the UK. The company is employee owned, financially strong and aligned around long term engineering quality rather than short term commercial pressure. This creates a culture where technical standards, capability building and professional development are prioritised. The Role The Associate Power Engineer role is a key technical and delivery position within the UK power function. It is suited to engineers with strong grounding in high voltage systems such as substation design, transmission and distribution, protection and control, or grid connection studies. Your contribution will support senior technical leaders and help strengthen the division as it grows. You will work closely with internal global power teams, UK project managers and external clients across data centre and power infrastructure programmes. Technical Delivery • Supporting and leading elements of high voltage substation design, physical design, plant layout, earthing, protection and control and transmission or distribution interfaces, • Working on grid connection studies, power systems modelling and technical analysis where relevant to your background, • Producing designs, calculations, specifications and reports to support major internal and external clients Project and Team Capability • Delivering packages of work from concept through to detailed design, • Working with senior engineers to maintain technical quality and alignment with best practice, • Supporting design reviews and contributing to the technical direction of projects, • Helping develop junior engineers and strengthening capability within the UK team Collaboration and Growth • Working with Project Manager’s, Senior Technical Lead’s and wider global power teams, • Building long term relationships with internal and external stakeholders, • Supporting the development of the UK power capability as the division expands, • This role offers a balanced combination of hands on high voltage engineering, delivery responsibility and career development toward senior technical leadership What You Will Bring • Degree qualified electrical engineer, • Strong grounding in high voltage engineering through substation design, grid connection studies, power systems analysis or transmission and distribution design, • Familiarity with IEC, IEEE and relevant design standards, • Experience preparing calculations, designs and technical documentation, • Confidence working with multidisciplinary teams and engaging with clients or internal stakeholders, • A desire to be part of a growing UK division and contribute to long term capability building, • Experience with DigSILENT, IPSA, ETAP or similar tools is advantageous but not essential depending on background This position is suited to an Associate Engineer or experienced Senior Engineer who wants to step into a growing organisation, gain exposure to major data centre and power programmes and develop toward technical leadership. What Is On Offer The role sits within a power business that already has substantial work to deliver. The demand exists today, with internal clients in data centres and global power groups driving a strong flow of projects into the UK. You will join a team that is receiving significant investment in technical capability and leadership as it expands into the wider UK and European market. There is long term opportunity as the division grows from its current size into a larger, self sustaining business unit. You will have the backing of large global power teams, access to established technical standards and a highly collaborative culture shaped by employee ownership. The environment supports professional development, chartership and progression into senior roles as the team expands. For the right engineer, this is a rare chance to join at a formative stage and help build a high quality power engineering capability in the UK. If you’re looking to take the next step in your HV career, get in touch with Dean Forster at Tempest Jones on , or apply now with your CV.

WELCOME TO LINAKER For 30 years Linaker has specialised in the creation and maintenance of tailor-made business environments. Having shaped workspaces for a wide range of businesses across the country, Linakers heritage lies in our ability to design and regulate unique spaces that truly work. Linaker was founded upon three core values: trust, reliability and care. We are not just a service provider, rather an essential part of our clients architecture and, ultimately, an extension of your business, a part of one team. The last couple of years has seen Linaker grow exponentially and 2025 is no exception. Our client base continues to grow month on month and as a result we are now looking for a talented Electrical Engineer to join us on our upward journey. Job Summary: We are seeking a skilled and experienced Electrical Engineer to join our team. This role requires a strong understanding of electrical systems, excellent problem-solving skills, and the ability to work independently and as part of a team. The purpose of the Electrical Engineer is to provide reactive and planned preventative maintenance for building engineering systems and services. Key Responsibilities • Maintain low voltage (LV) electrical systems and perform PPM routines., • Repair and maintain electrical equipment and fixtures., • Perform EICR Testing., • Ensure compliance with BS7671 wiring regulations., • Liaise with helpdesk for task responses., • Maintain site logbooks, compliance certification, and produce reports., • Participate in emergency call-out services., • City & Guilds Level 3 in Electrical Installation., • City and Guilds Level 3 certificate in the requirements for electrical installations BS 7671 (18th Edition), • City & Guilds 2391 inspection & testing., • Drivers License (No more than 6 points), • Ability to pass an enhanced DBS check., • Competitive basic Salary, • £155 a week Stand by rate., • 25 days holiday plus bank holidays, • Company van with private usage option, • Fuel Card, • Travel time paid door to door., • Overtime paid at time and a half., • Uniform & PPE, • Pension, • Working hours Monday Friday 8am 5pm, • Specialist tools provided. (Hand Tools to be provided by engineer), • Death In Service after 2 years Employed JBRP1_UKTJ

LOCATION - Manchester / Leeds / Leicester or Edinburgh We are seeking a qualified and enthusiastic Principal Electrical Building Services Engineer to support and develop the project delivery capabilities of our busy and successful building services team. Candidates will successfully lead and deliver multiple, medium complexity projects without supervision, or packages of high complexity projects under the direction of more experienced staff.You will provide advice to clients and will take responsibility for managing and cultivating client relationships and securing new work. You should be able to lead, or demonstrate the competency to lead, a team of less experienced staff as you may have line management responsibility. Project work will vary and you will have experience across a range of sectors including life sciences, defence, education, commercial, residential, renewable energy, industrial, retail, healthcare and leisure within both public and private domains. In this role you will be responsible for all aspects of design in the delivery of electrical engineering consultancy services for a portfolio of projects. You will be responsible for; undertaking calculations, production of drawings, producing specifications and reports, conducting site surveys, conducting construction stage duties, providing client liaison, consulting with members of design/construction teams and any other relevant duties required to comply with project briefs. Producing and reviewing electrical design drawings will be key to your role. Experience of using Autodesk Revit MEP would be beneficial.If required further training in Revit and other systems will be provided. You will have the passion and drive to deliver and manage projects in accordance with the clients brief and programme, and to help develop good client relationships. You should be capable of managing your own workload and the workload of others, updating forward plans of workload regularly & working to time allocations. Key responsibilities: Production and review of detailed design calculations for all aspects of electrical design. Production of specifications and plant schedules. Production of design notes, basis of design and RIBA stage reports showing compliance with standards and best practice. Production of design drawings from conception through to detailed design. Conducting detailed site surveys and inspection of installations. Mentoring and guidance of junior to intermediate engineers. Input into fee estimates and bid process. Support associates and director with resource planning and managing team workload. Holds (or meet the criteria to hold) security clearance to MOD SC level. Requirements: Ideally you will have an accredited Building Services /Electrical Engineering degree or higher educational qualification. Ideally Chartered engineer or working towards membership. The skill set and passion for engineering with the ability to manage and deliver electrical building services engineering designs across a range of sectors. Experienced in project lead and delivery of electrical services across multiple projects, as part of a multi discipline design team. Conducting any or all stages of electrical design from concept to completion as required by the project. Take design lead on projects promoting design excellence at all times. Experience in a range of digital tools including AutoCAD, AutoDesk Revit, Dialux, Relux, Amtech, NBS and Microsoft packages Proven ability to develop designs conscious of energy conservation, sustainability and with a knowledge basis of renewable technologies. Fully conversant with technical and legislation requirements for electrical services equipment and installation design and management. Able to take charge of project deliverables, make decisions on developing the discipline design elements, act on own initiative and operate in a pro-active way. Strong communication and people skills, particularly the ability to influence and negotiate both internally and externally with an open and inclusive style. Consulting closely with other professionals, including structural engineers, architects, surveyors, and contractors of in-house and external project teams. Strong report writing skills. Experience of producing and supporting fee estimates and bid writing would be beneficial. Able to generate a programme and produce progress reports against this. Experience in managing and mentoring junior to intermediate engineers. About Tetra Tech: Tetra Tech is a leading provider of high-end consulting and engineering services for projects worldwide. We combine the resources of a global, multibillion dollar company with local, client-focused delivery in more than 400 locations around the world. We are Leading with Science to provide sustainable and resilient solutions for our clients. At Tetra Tech, we provide a collaborative environment that supports individual performance, innovation, and creativity. We are proud to offer competitive compensation and benefits. For more information on our company, please visit our website . To apply, please submit your CV and cover letter on the Careers section of our website. We thank all applicants for their interest; however only those selected for an interview will be contacted. Tetra Tech is an equal opportunities employer and encourages applications from all suitably qualified and eligible candidates regardless of sex, race, disability, age, sexual orientation, transgender status, religion or belief, marital status, or pregnancy and maternity/shared parental leave, in line with the Equalities Act 2010. We are veryhappy to discuss flexible working for this role, including the possibility of reduced hours, flexible start and finish times, or compressed hours.We can offer a range of solutions to help you to get the most out of your work / life balance. Additional Information • Organization: 784 TCE, • Requisition #78400001575 JBRP1_UKTJ

WELCOME TO LINAKER For over 30 years, Linaker has built a reputation for delivering dependable, high-quality mechanical engineering services across a wide range of client environments. Our strength lies in keeping critical systems operationalsupporting organisations with technical precision, responsive maintenance, and long-term reliability. Founded on trust, care, and reliability, were more than a service providerwere a fully embedded partner in our clients operations. ABOUT THE ROLE As a HVAC / Gas multiskilled Engineer, you will be part of our National engineering team, responsible for delivering planned and reactive maintenance across a range of commercial and retail sites. You will ensure HVAC / Gas systems operate safely, efficiently, and in full compliance with statutory and client requirements. WHAT YOU WILL BE RESPONSIBLE FOR WITHIN YOUR SPECIFIED AREA Planned Preventative Maintenance (PPM) Carry out PPM tasks in line with SFG20, statutory requirements, and contract specifications. Maintain and service HVAC and gas plant including: Commercial gas boilers and heaters AHUs, FCUs, VRV/VRF, split systems Pumps, valves, fans, controls, and associated plant Ensure all works are completed proactively, efficiently, and to the required standard. Reactive Maintenance & Fault Finding Diagnose faults across both HVAC and gas systems, completing repairs within SLA requirements. Minimise downtime through effective troubleshooting and first-time fix focus. Escalate complex issues to the helpdesk or Contract Manager where appropriate. Compliance & Health & Safety Ensure all gas works are completed in accordance with Gas Safe regulations and current legislation. Ensure HVAC works comply with F-Gas regulations, manufacturer guidance, and company procedures. Maintain site logbooks and ensure accurate compliance documentation is completed and uploaded via the CAFM system. Work strictly in accordance with company H&S policies, RAMS, and statutory requirements. Quotations & Remedial Works Identify remedial works and produce accurate, commercially sound quotations, including: Correct parts identification Realistic labour allowances Clear scope and methodology Communication & Client Liaison Communicate professionally with clients, helpdesk, supervisors, and contract managers. Provide clear updates on works completed, defects identified, and follow-on actions required. Always act as a professional ambassador for Linaker. Asset, Van & Equipment Management Maintain van stock, tools, test equipment, and calibration devices. Ensure company assets are stored, maintained, and reported correctly. Participate in the on-call rota where applicable. WHAT WE ARE LOOKING FOR Essential Gas Qualifications NVQ Level 3 in Air Conditioning & Refrigeration / HVAC (or equivalent) F-Gas Category 1 Good electrical and mechanical fault-finding skills City & Guilds COCN1 Core Commercial Gas Safety CCN1 Core Domestic Natural Gas Safety CDGA1 Non-Domestic Natural Gas & LPG Direct Fired Heating Appliances CODNCO1 Changeover Domestic to Non-Domestic Core CIGA1 Non-Domestic Indirect Gas-Fired Heating Appliances CPA1 Combustion Performance Analysis CENWAT Domestic Central Heating/Hot Water Boilers ICPN1 Non-Domestic Pipework & Fittings TPCP1 / TPCP1A Testing & Purging ACRIB Gold Skills Card (Desirable) Understanding of F-Gas compliance and environmental regulations. Air Source Heat Pump (ASHP) or Ground Source Heat Pump (GSHP) (Preferred) Experience with larger complex sites, or critical plant systems (e.g. chillers, large AHUs, Boilers). Desirable Qualifications CKR1 Domestic Gas Cooking Appliances CCCN1 Non-Domestic Catering Appliances HTR1 Domestic Gas Fires & Wall Heaters CORT1 Radiant Plaque & Tube Heaters Legionella Awareness & Practical Training Asbestos Awareness PASMA IPAF 3a & 3b Experience 25 years experience in commercial gas maintenance. Experience within a mobile FM environment desirable. Strong diagnostic and fault-finding capability Proven commercial HVAC / Gas maintenance experience Good electrical and mechanical fault-finding skills Full UK Driving Licence Strong understanding of Health & Safety ACRIB Gold Skills Card (Desirable) Understanding of F-Gas compliance and environmental regulations. Electrical qualification or knowledge Asbestos awareness (Desirable) Experience working under the SFG20 framework for maintenance schedules. Experience with larger complex sites, or critical plant systems (e.g. chillers, large AHUs). 5 Years Industry Experience in similar position (Preferred) Air Source Heat Pump (ASHP) or Ground Source Heat Pump (GSHP) (Preferred) Take part in the on-call rota THE PACKAGE 25 Days annual leave plus bank holidays. Buy and sell holiday to suit your schedule. One paid volunteering day per year, empowering you to support causes that matter to you. Company Van for site travel. Access to our Employee assistant programme for wellbeing support. Auto enrolment in the company pension scheme. Full training by a supportive friendly team. Annual events. INTERESTED This is a fantastic opportunity to lead and develop a team of engineers in a business thats growing fast and investing in talent. If youre ready to step into a pivotal role, influence outcomes, and build something meaningful, wed love to hear from you. If you think youre a match, get in touch today EQUAL OPPORTUNITIES Linaker Limited is an equal opportunities employer committed to diversity and inclusion. We welcome Applications from all suitably qualified persons regardless of their race, sex, disability, religion/belief, sexual orientation, or age. JBRP1_UKTJ

The Role • Permanent We are looking for an Electrical Supervisor to lead electrical teams on planned works, reactive maintenance, and project installations. You will ensure all electrical activities are completed safely, on time, within budget, and in line with company standards and UK regulations. The role will also involve attending site to scope new works, providing technical input for pricing, and supporting the development of accurate quotations. Key Responsibilities Team Leadership & Supervision * Supervise electricians and apprentices on site. * Plan, allocate, and monitor daily tasks to ensure efficient workflow. * Provide technical guidance and support to the team. * Conduct site briefings, toolbox talks, and team updates. Project & Work Delivery * Oversee electrical installation, maintenance, and testing works. * Ensure projects are delivered in line with drawings, specifications, and RAMS. * Coordinate materials, equipment, and subcontractors. * Monitor progress and report issues, delays, or variations to the Project Manager. Safety, Compliance & Quality * Ensure work is completed in accordance with BS 7671 (IET Wiring Regulations), Electricity at Work Regulations, and company H&S policies. * Conduct site inspections to ensure safe working practices. * Complete and review documentation including permits, risk assessments, method statements, and quality checks. Testing & Certification * Carry out electrical testing, fault finding, and commissioning. * Complete electrical certificates and reports accurately. * Ensure compliance with NICEIC or equivalent accreditation standards. Client & Stakeholder Communication * Act as a key point of contact for clients, site managers, and contractors. * Attend coordination meetings and provide progress updates. * Maintain strong customer relationships and resolve site issues promptly. Administration & Reporting * Maintain accurate records of labour, materials, and site activities. * Submit daily or weekly reports to management. * Assist with preparing variations, quotations, and job completion documentation. Key Skills / Qualifications Essential * NVQ Level 3 in Electrical Installation or equivalent. * 18th Edition Wiring Regulations (BS 7671). * Strong supervisory or team-leading experience. * Experience in industrial or commercial electrical installation or maintenance. * Full UK Driving Licence. Desirable * Testing & Inspection (2391 or equivalent). * SSSTS or SMSTS qualification. * First Aid at Work. * IPAF, PASMA, or confined space training. * Experience within marine, industrial, or engineering environments. Skills & Attributes * Experience supervising teams within an engineering or service environment. * Ability to manage teams, subcontractors, and projects effectively. * Strong understanding of health & safety procedures, compliance, and risk management. * Excellent communication, organisation, and problem-solving skills. * Commitment to maintaining a safety-first culture, conducting site audits, reporting hazards, and ensuring compliance with company and customer standards. JBRP1_UKTJ

Job Description Electrical Engineering Manager Chichester Permanent, full-time Competitive salary plus benefits The Electrical Engineering Manager will be primarily based in the office managing the day to day operations of the electrical design and commissioning team including high level process and electrical design & instrumentation selection. This will also include assisting with preparation & conducting system inspections (FATs) with customers in attendance and assisting with onsite commissioning and varied tasks at times and as such, you will be required to travel to customer sites. More about the role: • Manage and support Electrical Design and Commissioning team including annual appraisals, • Responsibility for all electrical and commissioning aspects of projects, • Grow and develop the team to support company growth, • Review/develop project maps, leading to placement of Purchase Order requests, • Manage approval process for electrical designs for compliance with engineering principles, company standards, customer contract requirements, and related specifications. (P&ID, Technical Drawings, Wiring Diagrams, Instrument Hook-ups, Control Philosophy documents, Functional Design Specs etc), • Participate/support in activities concerned with technical developments, scheduling, resolving engineering design and test problems., • Propose/Review suitable electrical components for projects (Instrumentation, Valves, Pumps, Switch Gear, PLCs etc), • Support/Participation in Factory Acceptance Test planning and execution, • Provide technical support to commercial team on project tenders, • Manage project schedule and provide updates to project managers and/or customers, • Develop/maintain knowledge & understanding Explosive Atmospheres (ISO/IEC 80079-34), • Minimum HNC Level in Electrical Engineering or equivalent, • Minimum 10 years industry experience in an electrical design field., • Committed to a career in the Electrical Engineering Profession, • Ability to work under pressure and meet deadlines., • Sound knowledge of IT, including use of Microsoft applications., • Awareness & understanding of Quality, Environmental, Safety & Explosive Atmospheres Standards & working procedures., • Use of design software (AutoCAD LT)., • Understanding of controllers / PLCs / VSDs., • Ability to perform related administration tasks., • To be able to work independently & as part of a team., • Possess good time management skills, being punctual and organised. JBRP1_UKTJ

Job Title: Power Press Maintenance Engineer Location: Bootle, Merseyside Salary: £47,500 per annum Shift: Day Shift About the Role We are seeking a skilled and experienced Power Press Maintenance Engineer to join our maintenance team at our Bootle facility. This is a day shift position offering a competitive salary of £47,500. The successful candidate will be responsible for the inspection, maintenance, and repair of power presses, ensuring they operate safely, efficiently, and in full compliance with regulatory requirements. Key Responsibilities Carry out routine inspections, maintenance, and repairs on power presses in accordance with HSG236 guidance for power press safety . Ensure all power presses are maintained to the required safety standards and are safe to operate. Conduct thorough examinations and maintenance checks on press tools, guards, safety systems, and associated equipment. Maintain accurate maintenance and inspection records in line with company and regulatory requirements. Diagnose mechanical and electrical faults on power presses and implement effective repairs. Support production teams by responding promptly to equipment breakdowns and minimising downtime. When not working on power presses, assist the wider maintenance team with servicing, repairing, and improving other production machinery across the site. Participate in planned preventative maintenance (PPM) schedules across manufacturing equipment. Work closely with engineering and production teams to continuously improve machine reliability and safety. Follow all site health, safety, and environmental procedures. Requirements Proven experience maintaining and repairing power presses in a manufacturing environment. Strong knowledge of safety requirements and inspection procedures for power presses, including compliance with HSG236. Mechanical maintenance background (electrical knowledge is advantageous). Experience with fault finding, preventative maintenance, and machinery repair. Ability to read engineering drawings and technical documentation. Strong commitment to workplace safety and safe systems of work. Ability to work both independently and as part of a maintenance team. Desirable Skills Time-served apprenticeship in Mechanical or Maintenance Engineering. Experience working within a fast-paced manufacturing or production environment. Familiarity with general production machinery including conveyors, automated equipment, and packaging lines. What We Offer Competitive salary of £47,500 per year. Stable day shift working pattern. Opportunity to work in a safety-focused engineering environment. Ongoing training and development within the maintenance team.

Job Title: Refrigeration Engineer Location: Liverpool Pay Range/details: £46,791.53 per annum(incl.13 standby payments) Contract Type: Permanent Omega are supporting a leading facilities management provider in their search for a Refrigeration Engineer work on a major UK supermarket contract. The right Refrigeration Engineer will be the first line in all service and maintenance throughout allocated sites. They will also effectively maintain service and repair Refrigeration Equipment in customer locations and aid HVAC equipment containing refrigeration circuits. Key Responsibilities - Refrigeration Engineer • Carry out reactive and planned refrigeration maintenance within agreed timescales., • Diagnose faults, identify non-repairable issues and recommend replacements., • Complete all PPM, technical and compliance paperwork accurately and on time., • Order and fit parts in line with company procedures., • Respond promptly to Helpdesk service calls and complete repairs efficiently., • Communicate issues affecting store operations to GSMs and build strong working relationships., • Complete surveys, reports and job documentation as required., • Participate in the out-of-hours standby rota and arrange cover when needed., • Working with CO? refrigeration pack systems., • Time-served apprenticeship with NVQ/C&G refrigeration qualification., • C&G 2079 / CITB refrigerant handling certificate / F Gas Category 1, • Strong refrigeration, electrical, mechanical and diagnostic skills., • Ability to read technical drawings and apply relevant H&S legislation., • Good communication and customer-facing skills., • Self-motivated, professional and able to work at heights using access equipment., • 33 Days Holiday (Inc. Bank Holidays)., • Private Pension., • HealthShield Cashback Plan - Reclaim part of your dental/optical costs., • OneCity - Employee Discount Platform., • Employee Value Awards up to the value of £250., • Access to Costco Personal Membership Subscription., • Mental and Physical Health Services (Wisdom, Thrive, SkinVision)., • Electric Car Scheme (Criteria Applies). Candidates who are currently a Refrigeration Engineer, HVAC Engineer, Air Conditioning Engineer, Maintenance Engineer or Service Engineer may be suitable for this position. xrnqpay For details of other opportunities available within your chosen field please visit our website Omega is an employment agency specialising in opportunities at all levels within the Engineering, Manufacturing, Aerospace, Automotive, Electronics, Defence, Scientific, Energy & Renewables and Tech sectors. Please make sure you read the following details carefully before making any applications.

Introduction Saab in UK is growing rapidly, with over 500 colleagues across eight sites. We bring together Swedish heritage and British expertise to drive innovation in areas such as software engineering, underwater robotics, radars, AI, and armed forces training. Joining Saab in UK means contributing to the security and resilience of society while building a career with real scope for personal and professional growth. What you will be part of Explore a wealth of possibilities. Take on challenges, create smart inventions, and grow beyond. This is a place for curious minds, brave pioneers, and everyone in between. Together, we achieve the extraordinary, each bringing our unique perspectives. Your part matters. Saab is a leading defence and security company with an enduring mission, to help nations keep their people and society safe. Empowered by its 26,000 talented people, Saab constantly pushes the boundaries of technology to create a safer and more sustainable world. Saab designs, manufactures and maintains advanced systems in aeronautics, weapons, command and control, sensors and underwater systems. Saab is headquartered in Sweden. It has major operations all over the world and is part of the domestic defence capability of several nations. The Role: This role is part of our Saab Seaeye Business Unit in Fareham. The role will aim to provide Production Engineering support for the final assembly and testing of remotely operated vehicles and systems, with a focus on clear, standardised process documentation. In addition, ensure appropriate production processes, equipment, and facilities are in place to safely and consistently manufacture products to meet cost, time, and quality requirements. Key Responsibilities: * Conduct an analysis of current SOPs in the integration department to identify gaps, outdated procedures and areas for improvement. * Standardise process and procedures across the department to ensure consistency, reduce variation, and enhance cross-departmental collaboration. * Own, document and train others on manufacturing process and standards. * Attend SQCDP meetings and support a hands-on problem solving approach with Area Team Leader and Quality Engineering to achieve OTD and right first time objectives. * Assess compliance and adhere to safety/quality standards. * Providing technical support for production and production control. * Developing, optimising and implementing factory floor layouts/production cells. * Analyse data to drive continuous improvement of processes and workflows. Skills and Experience: * Multi-disciplined senior engineer with an electrical bias and experience in test, pre-commissioning, and fault finding. * Background in low-volume, one-off engineered products and systems; ideal for Production, Project, or Delivery Engineers. * Strong mechanical, electrical, and systems engineering knowledge, especially for complex assemblies like ROVs. * Troubleshooting: Technical problem-solving skills to diagnose and resolve production issues. * Minimum qualifications HNC/HND, Bachelor's degree or relevant experience preferably in Electrical, Mechanical, Engineering, Industrial Engineering, Manufacturing Engineering, or a related field. * Hands-on production support experience in assembly, testing, and quality control. * Relevant certifications (e.g., Lean Manufacturing, Six Sigma Green Belt) are a plus; familiarity with hydraulics is also beneficial. Support and training is available for Working with Electrics, High Voltages, and Hydraulics. By submitting an application to Saab UK you consent to undertaking workforce screening activities that may include but are not limited to: Baseline Personnel Security checks, National Security Vetting, reference checks, verification of working rights and in all circumstances preferred candidates will be placed through a security interview.

WHAT WE ARE LOOKING FOR We require 1 Electrical (Vetronics) Engineer to join our team in Gateshead. The initial assignment will be for 6 months. The individual would be expected to work a minimum 40 hours over 5 days each week. The role would be hybrid, so weekly site attendance is expected. Some occasional travel to Telford might be required. They will be getting involved in the design & integration of equipment at the system and sub-system levels. This is a varied role which will expose lots of different vehicles and systems. This is a demanding role, requiring close liaison between Engineering teams, Vetronics Team Leader and suppliers. Significant drive and energy, strong systems engineering skills, and the ability to deliver a diverse programme to demanding time, target cost and quality requirements are essential attributes to succeed. The candidate must be a team player who is prepared to work with a multi-site engineering team within RBSL and the customer community. The individual will be required to work across geographical and cultural divides to draw together a comprehensive engineering capability that will derive balanced system solutions. Position Duties and Responsibilities Produce drawings, schemes, design specifications, technical plans, reports and any other technical outputs, which simultaneously fulfil contractual requirements and contribute to cost-effective design. Assisting in the validation of any systems / equipment, which may include the generation of test schedules, test and integration plans and the writing/investigation of technical reports. Provide support to engineering input to Customer submissions, including assistance in the development of task estimates. Liaise with Suppliers to ensure compliance with technical requirements and quality standards. Maintain an up to date understanding of technical / engineering developments and apply this knowledge appropriately to the projects in hand. Schedule own work to meet target timescales and budget demands. Perform self-verification of own tasks to ensure completeness and quality of information. Undertake cross-checking of peers' and subordinates' work to ensure completeness and quality of information. WHAT QUALIFICATIONS YOU SHOULD HAVE Degree / HND or equivalent qualification or experience in Electrical Engineering Electrical engineering knowledge using 3D & 2D software (ideally CREO or NX) Working knowledge of drawing standards (e.g. BS8888) and the application of geometric tolerances. Design of components and systems for new products and to support on-going product development Ability to adopt innovative approaches to technical solutions and processes. Flexible in approach to work ensuring delivery is achieved. Competent in the use of Microsoft based products (Excel, Word and Project) Good problem solving skills. It is desirable to have an understanding of the basic requirements specified in Def Stan 61-5 Part 6 (Nominal 12V and 24V DC Electrical Systems in Military Platforms) and Def Stan 59-411 (Electromagnetic Compatibility). It is desirable to have experience of the E3 electrical design package. JBRP1_UKTJ

Were working with a large pan-European manufacturing business which operates 7 days a week that is actively seeking to add an experienced Multiskilled Maintenance Electrician to join one of its site Manufacturing Engineering Support teams. Shift Engineer 40 hours per week - Double or Triple Shift or Permanent Nights (plus overtime) Location: Nr Eastbourne, Sussex Salary: Dependent on Experience The positions responsibilities are: • Reactive Maintenance on automated production, printing, packaging or finishing machinery, • Pre-planned Maintenance (PPM) - Input to and carry out preventive maintenance routines, • Mechanical fault finding, • Electrical fault finding with and without diagrams (three phase and control systems), • Fault finding and repair on hydraulic or pneumatic systems, • Small installation projects, • Continuous Improvement to maintain optimal machine efficiency, • To keep clean any areas in which you are working, including transit areas to and from the workshop, the workshop and stores, • Support the Operations team in achieving targets, • Complying to the companys Health and Safety policies and procedures, • Contributing to cost effective technical solutions, • Deliver to the operational expectations, • Be part of a weekend call-out rota To be successful, we would like you to have: • A recognised industrial Electrical qualification 18th Edition and Level 3 Engineering qualification (City & Guilds, NVQ or equivalent), • Have experience working as a Maintenance Engineer or as a dedicated Multiskilled or Electrical Engineer in a Manufacturing environment., • Experience in the print, packaging or associated industries would be great but is not essential. But experience in a manufacturing or industrial automation environment is critical., • Strong electrical fault-finding skill in particular on PLCs, drives and inverters, • Excellent fault finding and diagnostic skills, • Ability to read and interpret engineering diagrams, • Experience with maintenance PPM and RM programmes., • Ideally experience working with highly skilled Operators or Technicians., • Have good communication, organisational and team work skills., • Self motivation, ability to apply initiative and determination. Specific training where required will be provided, OEM suppliers and via remote modem diagnostic support from the OEM. This is a great opportunity to join a leading manufacturer in a key maintenance engineering role working on large scale machinery in a time-sensitive manufacturing environment. Unfortunately, we are not able to provide sponsorship at this stage JBRP1_UKTJ

Overview I'm seeking an experienced Digital Engineering Team Lead to guide a team of Digital & Electronic Engineers working across a varied portfolio of radar products. This role combines hands-on digital design expertise with technical leadership, people development and strategic input into next-generation radar systems. What You'll Be Doing • Applying technical expertise in the digital and electronic domain to support complex radar system designs., • Leading, mentoring and developing a team of Digital Electronic Engineers across multiple projects., • Driving learning, development and skills growth within the Digital Engineering function., • Acting as a subject matter expert in Digital/Electronic Engineering., • Coordinating Digital Engineering cost estimates, bid support and cost-to-complete activities., • Degree in Electronic Engineering or a closely related discipline., • Strong understanding of digital design techniques including requirements generation, implementation and verification., • Knowledge of complex digital PCB design and experience working with FPGAs., • Ability to collaborate effectively with digital, analogue, RF and electrical specialists., • Experience delivering designs through the full lifecycle, with design assurance and sign-off responsibility. You will join a collaborative, multi-disciplinary radar engineering team, working across both established products and innovative new technologies designed to meet emerging system requirements and future operational challenges. This is an excellent opportunity to develop deeper expertise in digital engineering, radar systems and advanced design methods, while growing your technical leadership responsibilities. Benefits A comprehensive benefits offering, which may include: • Competitive pension, • Employee share schemes, • Health, wellbeing and lifestyle discounts, • Green car scheme, • Private health options, • Shopping and leisure discounts Why Join Us? You'll be part of an organisation focused on engineering excellence, innovation and long-term technical capability. This role offers exposure to cutting-edge radar technologies, opportunities for personal development, and the chance to make a real impact within a high-performing engineering environment. Contact me or apply for furether details! JBRP1_UKTJ

Shift Maintenance EngineerRotating Days/Nights£47,462 - £50,400 Per Annum + Excellent Benefits and Continuous development & support.Golborne (WA3 3JD) At ALPLA, we stand for high-quality plastic packaging throughout the world. Around 22,000 colleagues produce quality packaging for foodstuffs, cosmetics and industrial cleaning brands for many blue-chip clients across 182 ALPLA sites in 45 countries. At our UK Flagship Golborne plant, we are looking to enhance our existing engineering function Reporting into the Engineering Manager. Your role will see you actively working in both preventative and reactive maintenance activities within the plant, the main focus of your role is to minimise downtime and ensure high efficiencies are achieved within the business unit working on state of the art equipment and machinery Tasks & responsibilities: Ensure that all equipment, machinery and peripherals operate efficiently and at full capability, ensuring a continuous production process. Carry out repairs on machines as part of breakdown or preventative maintenance. Ensure that all relevant paperwork and maintenance logs are completed correctly and accurately in accordance with company procedure. Ensure that all duties are carried out in accordance with quality, hygiene and food safety policies. To perform any other duties in connection with the job that may from time to time be reasonably required by supervision and which are consistent with the Purpose of job/mission. Skills/Experience: Time served apprenticeship Electrical discipline preferred Minimum Multi Skill experience Knowledge of hydraulics and the ability to read schematics Knowledge of pneumatics and the ability to read schematics 17th or 18th edition electrical regulations / Full understanding of all energy isolation, safe working and the use of L.O.T.O Demonstratable electrical fault finding skills Experience in a FMCG background / Cross functional M&E multi-skilled Must have a clean as you go work ethic, and also have a good understanding of the basic fundaments of 5S in the workplace. Your profile: Reliable, self-motivated and have a resourceful approach to work. Have proven experience of reactive and preventative maintenance techniques. Good communicators at all levels, possess team working skills. Additional Information; • Brand new Welfare Facilities, • State of the art equipment/machinery, • Fully stocked tool room, • Onsite and Offsite Training, • Full PPE & Uniforms provided, • Life assurance from day one - 3 x salary, • Company Pension scheme - 6% employee contributions (Scottish Widow), • Subsided onsite canteen, • Enhanced Maternity and paternity pay scheme, • Christmas vouchers for you and your children, • Long service awards ALPLA UK offer career development and progression opportunities we support and upskill, a perfect opportunity for someone looking to enhance their career within a Global Manufacturing organisation This position is advertised by ALPLA UK Contact Nathan Turtington Internal Recruiter for more information JBRP1_UKTJ

Shift Engineer - Chatham | Full-Time, Permanent | £49,000 Are you an Engineer who thrives on solving problems, keeping complex machinery running seamlessly, and making a real difference every day? This is your chance to join a forward-thinking organisation that supports businesses in maintaining hygiene, safety, and operational excellence-while committing to a sustainable future. Why This Role Matters: In this position, your work will directly support essential services that protect employees, customers, and the environment. You will be part of a team that values your expertise, encourages innovation, and rewards dedication. What You Will Receive: £49,000 per annum 5% pension contribution Private healthcare 29 days' annual leave A full-time, permanent role with a structured rotating shift pattern that ensures variety and work-life balance Your Role: As a Shift Engineer, you will be responsible for maintaining and improving plant, machinery, and infrastructure. Your day-to-day work will be varied, including scheduled preventative maintenance, troubleshooting, repairs, project work, and equipment upgrades. You will play a vital role in ensuring production runs smoothly, supporting colleagues, and contributing to continuous improvement. Key Responsibilities: Carry out maintenance and repair work safely and efficiently, keeping colleagues informed at all times Complete scheduled preventative maintenance and provide insights to enhance systems Collaborate closely with engineers on other shifts to ensure seamless handovers Support installation projects, plant upgrades, and infrastructure improvements Identify recurring technical issues and implement practical, sustainable solutions Adhere strictly to health and safety standards and engineering best practices Communicate clearly and effectively with colleagues across production and engineering Who We Are Looking For: A recognised mechanical or electrical qualification (e.g., City & Guilds) Strong skills in both mechanical and electrical trades Experience in electrical installation and maintenance Competence in mechanical fabrication and maintenance Ability to fault-find electronic components to a detailed level Knowledge of pneumatics, hydraulics, or steam systems is advantageous Familiarity with Electrical Installation 18th Edition preferred Excellent verbal and written English Shift Pattern: Week 1: Monday-Saturday, 06:00-14:30 (30-minute break) Week 2: Monday-Friday, 14:00-22:30 (30-minute break) Every 5th or 6th week: Monday-Friday, 22:00-06:30 (30-minute break) Why You Should Apply: This role is more than just a job - it is an opportunity to develop your career in an environment that values your skills, invests in your growth, and offers genuine responsibility from day one. If you are a proactive, hands-on engineer who enjoys variety, challenges, and making a tangible impact, this is the perfect opportunity to take the next step. Barker Ross Group values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. We encourage and welcome applications from all sections of society and are more than happy to discuss reasonable adjustments and/or additional arrangements as required to support your application. For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business. JBRP1_UKTJ

We are looking for aMultiskilled Electrical Maintenance Engineer to work on a permanent basis in St Helens. The role is working for a global manufacturing company. The shifts for theMultiskilled Electrical Maintenance Engineer are Monday to Friday; 6am - 2pm and 2pm - 10pm (No nights). Salary is c£40-50,000 per annum (depending on experience) plus 25 days' holidays, company bonus, healthcare, pension etc. Duties for theMultiskilled Electrical Maintenance Engineer: Key Responsibilities * Perform planned preventative maintenance (PPM) and reactive maintenance on electrical and mechanical production equipment. * Diagnose electrical faults on machinery including motors, sensors, control panels, PLCs, drives, and automation systems. * Carry out mechanical repairs and adjustments as required, including work on pneumatics, hydraulics, conveyors, and general plant equipment. * Respond promptly to equipment breakdowns to minimise operational disruption. * Assist in the installation, commissioning, and modification of machinery and production lines. * Ensure all maintenance tasks are performed safely and in compliance with company procedures and industry regulations. * Maintain accurate maintenance logs, documentation, and equipment records. * Identify opportunities for continuous improvement and contribute to reliability and efficiency projects. * Support cross-functional teams including production, quality, and engineering. * Participate in shift patterns, on-call rota, or overtime as required. Skills & Experience * Time-served apprenticeship or recognised qualification in Electrical Engineering (NVQ Level 3, HNC/HND, or equivalent). * Strong electrical fault-finding skills within a manufacturing or industrial environment. * Good mechanical aptitude and experience working on mechanical systems. * Familiarity with PLC systems (Siemens, Allen-Bradley, etc.) is desirable. * Experience working with AC/DC motors, variable speed drives, sensors, and automated machinery. * Ability to read and interpret electrical and mechanical drawings. * Strong problem-solving skills and a proactive approach. * Good communication skills and ability to work independently or as part of a team. * Knowledge of health & safety legislation, safe isolation procedures, and permit-to-work systems. How to Apply for the Multi Skilled Electrical Maintenance Engineer: Please call Rebecca at Simply Recruitment Group or press APPLY NOW! JBRP1_UKTJ

Areas: Bournemouth, Southampton and Salisbury Hours: Days Monday to Friday Salary Band: 32-34K Additional: Company Van, I Pad and Tools Our Client has a full time, permanent opportunity to join their team of dedicated service engineers and sales representatives in offering a wide range of equipment and services to their customers. MAIN RESPONSIBILITIES Carry out planned and preventative maintenance, LOLER inspections, and other service activities on the Companies range of products as well as on competitors products covered by the Companies contracts. You will be required to follow logical and systematic steps to test equipment and diagnose any potential or existing faults while working in a Safe and Cost-effective manner. Recommend repairs and improvements to the customer and provide quotations on prospective work such as replacement of wear and tear parts to avoid breakdowns between service visits and upgrades to improve the functionality of the equipment. Work in close cooperation with the sales force so that potential sales opportunities and leads outside of your scope can be captured and managed internally. To develop full knowledge of the Companies products. Responsible to maintain the company vehicle, its stock, and tools as well as your company phone, tablet/laptop in good working order. Responsible for accurate timesheet reporting, correctly detailing job numbers, recording travel time, tagging and labelling equipment, etc. Provide out-of-hours cover on a call-out rota. CANDIDATE PROFILE You are responsible, reliable, punctual, and trustworthy You are experienced in following Health and Safety guidelines and are experienced in making appropriate Risk Assessments and you ensure that you work safely. Strong customer focus; passionate about customers and the service you provide as a Company Engineer. Results orientated, you aim to carry out work to a high standard within the allocated time and costs. You are diligent and have keen attention to detail. Your work is precise, and your documentation is detailed and accurately records the required information. Eager to learn and develop new skills both in technical and commercial-related matters. Trained and experienced in carrying out LOLER tests on or similar equipment is essential. Able and willing to stay away overnight to cover more remote work to maximise time on site and reduce travel time in own area and when working in other engineers areas. Formal education in Electrical, Mechanical, and/or Hydraulic Engineering is preferred although a full company induction and training will be provided. Able to work on your own, managing your time and workload accordingly. This is a great opportunity to join a company who are part of a larger group and are leaders in their Industry. At NMC Recruitment we review all applications and will be in touch with Candidates showing the required experience. We may store your information on our database for future opportunities JBRP1_UKTJ

An opportunity has arisen for a Senior EC&I Engineer to support the discipline Lead Engineer by providing technical delivery of schedule items, inclusive of relevant engineering underpinning for which through collaboration with the multi-disciplinary team / wider SL stakeholders. Only apply if you are a British Citizen and passport holder and not have worked outside the UK during the past 5 years. Candidates can start with BPSS security clearance whilst higher level clearance is being undertaken. This is a full time 6 month contract role inside IR35 based in Warrington 1-2 days a week office presence (Other SL location may be considered) and 3-4 days remotely but can be negotiated based on personal circumstance. ROLE DESCRIPTION The candidate shall be able to reference recent employment history where the CE&I Senior Engineer role has been successfully undertaken and shall be capable of the following: Deriving high level engineering solutions through structured optioneering processes down-selection of instrumentation / remote handling systems. Deriving engineering specifications inclusive of structured requirements management and validation. Determining data requirements for a waste tracking / records management capability, in accordance with site regulatory requirements particularly defining the interfaces between Operational Technology (OT) and Information Technology (IT) systems. Producing design drawings and documentation at all applicable stages of the Sellafield Gated Process. Engaging other disciplines and wider SL stakeholders at key lifecycle points, including an awareness of basic project management fundamentals. Ensuring deliverables are completed in line with the SL checking and approval processes. ESSENTIAL SKILLS & QUALIFICATIONS Must have significant demonstratable experience in CE&I Project Delivery - Translating user requirements and technical specification into fully engineered, safe and legal design solution. Specification and down-selection of process instrumentation systems. Experience of structured requirements management / optioneering practices. Re. tracking capability per Role Description: determining high-level solutions for data management capabilities, prior to dedicated IT / OT delivery projects. Have the ability to work as part of an integrated delivery team, and individually, working within sometimes restrictive time constraints assuming responsibility for providing engineering deliverables and conducting technical investigations. Demonstrate excellent written and verbal communication skills. Have strong interpersonal skills and be able to interact with people at all levels. Demonstrable understanding of the legislative and regulatory environment in which Sellafield operates, including those covering safety, design, and operation of plant including Nuclear Installations Act, Site Licence Conditions, HASAWA, EWR, IRR. Demonstrable experience in highly-regulated industries. Qualification shall be in a related engineering discipline (Electrical & Electronic / Controls & Instruments). DESIRABLE Experience of conducting wider stakeholder engagement within Sellafield, i.e., liaison with Technical specialists, Capabilities / Centre(s) of Experience, regulatory officials, plant Operations / Maintenance / Engineering entities, ISO / IT entities. Experience of nuclear encapsulation / grout flood-filling applications. Existing P1/P4 pass and Sellafield IT holder, including knowledge of SEMS/SLMS. D03760 (Sellafield Design Change Awareness) and D03770 (Sellafield Checking & Approvals) completed within the last 3 years. AutoCAD 2D / Client IT Systems (MS Office, Cimage, AVEVA etc.) Degree Qualified in Electrical / Electronic Engineering City and Guilds 2382 - Understand the Requirements of Electrical Installations BS 7671:2018 (2022) Professional registration with a relevant institute (I.e IET, IoP, InstMC) TUV Functional Safety Certification (or equivalent) JBRP1_UKTJ

Electrical Operations Manager Location: East Midlands Type: Permanent - Full-Time Pay: Negotiable (DOE) + Car/Allowance + Benefits A growing and well-established electrical compliance contractor is seeking an experienced Electrical Operations Manager to lead its Electrical Operations division. This is an excellent opportunity for a technically strong leader to join a successful business delivering electrical compliance and service contracts across the commercial sector. Roles & Responsibilities • Managing a team of 20+ office and field-based staff, • Overseeing commercial electrical compliance contracts across various sites, • Coordinating labour planning, materials and operational resources, • Conducting site visits to monitor progress and contract performance, • Working closely with senior management and estimating teams to maintain budgets, • Supporting engineers with technical guidance and problem solving, • Attending client meetings and maintaining strong customer relationships, • Ensuring all work meets required quality and compliance standards, • Supporting NICEIC compliance as a Qualified Supervisor, • Driving operational improvements and efficiencies Contracts typically cover a range of sites including schools, offices, industrial facilities, warehouses, public buildings and healthcare environments. Requirements • Proven experience working as an electrician in maintenance, installation, or service environments, • Ability to work independently and as part of a wider team - Strong fault-finding and problem-solving skills - Excellent communication and customer-facing skills - Good organisational and time-management abilities Qualifications (Essential): • Minimum 3 years' experience as an Electrical Contracts or Operations Manager, • NVQ Level 3 in Electrical Installation (or equivalent), • 18th Edition Wiring Regulations (C&G 2382), • Inspection & Testing (C&G 2391 or equivalent), • Strong understanding of BS7671 and electrical compliance regulations, • NICEIC Qualified Supervisor status, • Experience managing commercial electrical contracts, • Excellent communication and organisational skills, • Ability to manage multiple projects simultaneously Desirable Experience • Health & Safety qualifications (IOSH, SSSTS or SMSTS), • Experience delivering both small and large-scale electrical projects What We Offer • Competitive, • Company car or car allowance, • Fuel card, • Company pension, • Increasing holiday allowance with service, • Career progression opportunities, • Annual salary reviews Next Steps Apply to this Electrical Operations Manager role through this advert. If you would like more information about this role, please contact Kevin McGann in our Construction team on 0116 262 3733. If successful, you will need to digitally register with our agency (if you haven't already done so). If you have not been contacted regarding your application within 7 days, please assume that you have not been successful. We will, however, retain your application for any future roles for which you may be suitable. About Regional Recruitment This position is being advertised by Regional Recruitment Ltd, an award-winning independent recruitment agency established in 2008. We specialise in permanent, temporary, and contract opportunities across the Commercial, Construction, Industrial, Technology, and Engineering sectors. To explore more roles available across the UK, please visit or get in touch with us directly: Telephone: 0116 262 3733 Email: mailto: JBRP1_UKTJ

An exciting new opportunity has come up for a Lead PES Engineer based at Hinton House in Warrington on a hybrid basis - 3 days a week in the office (Mon/Tue/Wed Typically) with occasional visits to Sellafield Site, Suppliers and Contractors Facilities. This is a 12 month contract role inside IR35, the individual will be responsible for all aspects of PES delivery across numerus projects that have PES aspects from concept to handover. Candidates can start with BPSS security clearance whilst higher level clearance is being undertaken. ROLE RESPONSIBILITIES: This role involves being the SME for PES delivery across the SNM projects portfolio. SC will be required. Range of tasks and projects delivering SNM Value Stream scope with a focus on the delivery of Operational Technology/ Programmable Electronic Systems. They will functionally report to the Senior/Responsible Engineer for the projects (this could be different people from project to project). The role will require the individual to deliver the project PES deliverables in line with SL tailored process of ISO 15288 (SL QMS, standards, and guides) and be the key CE&I Person regarding PES delivery. This role will require strong stakeholder management of operators and maintainers, operation management, safety case managers, nuclear custodians, OTG, construction and commissioning staff etc throughout the lifecycle but especially during the stakeholder requirements definition process and requirements analysis process. As a key role within the Integrated Project Team (IPT) the individual will work closely with other design disciplines, human factors, quality, cost controls, REs & AEMs, systems engineers and OTG. The role also covers the management and execution of supply chain delivery of the systems within the technical processes box above. Including authoring, checking, and reviewing deliverables from internal and external sources, verification and validation, quality, time, and cost management. The individual will functionally manage any internal (DSA) resources working on PES delivery for the projects ensuring the deliverables are delivered to quality, time, and cost. Manage any reporting requirements including ensuring any technical, safety and engineering risks are identified and escalated to the Senior/Responsible Engineer and AEM. ESSENTIAL EXPERIENCE & QUALIFICATIONS: Must have significant demonstratable experience in working in control system requirements capture and delivery through to handover. Demonstratable evidence of delivery in line with ISO/IEC 15288 or equivalent processes. Familiar with industrial cyber security practices i.e., BS 62443. Familiar with the V-Model processes and deliverables for PES systems delivery. Can demonstrate ability of undertaking site visits to ascertain validation of client requirements and managing a high number of client stakeholders for successful completion of design. Experience of managing PES deliverables and people in all phases of the PES project delivery lifecycle. Experience of managing the supply chain (PES design & build) within an NEC3 contract or equivalent At least 5 years working in roles where knowledge of systems / PES design lifecycle delivery was a key attribute. At least 3 year's experience of working within a regulated and quality assured system (preferably nuclear) in roles where professional engineering judgement is the key attribute. Have the ability to work as part of an integrated delivery team, and individually, working within sometimes restrictive time constraints. Demonstrate excellent written and verbal communication skills Have strong interpersonal skills and be able to interact with people at all levels Demonstrable experience in highly-regulated industries. Demonstrable understanding of the legislative and regulatory environment in which Sellafield operates, including those covering safety, design, and operation of plant including Nuclear Installations Act, Site Licence Conditions, HASAWA, EWR, IRR. Degree Qualified in appropriate discipline Professional registration (minimum IEng Level) with a relevant institute (i.e., IET, IoP. IMC) DESIRABLE: Experience in delivering in accordance with Sellafield Ltd Enterprise Management System Familiarity with SL processes and procedures for the delivery of Programmable Electronic Systems: ES_1_2479_1 Issue 5 Implementation of Programmable Electronic System based Control and Monitoring ES_1_2487_1 Issue 2 Operational Technology Security SL PES delivery lifecycle Familiarisation of the SL Gated project lifecycle Familiarity with working on the Sellafield Site and its facilities and assets. Experience working in Sellafield design and the tools and techniques Sellafield uses including HAZOPS, MFDs, S&IDDs, SIDs, URS packages, CONCISE etc for Control system delivery. Existing P1/P4 pass and Sellafield IT holder. AutoCAD 2D / Client IT Systems (MS Office, Cimage, AVEVA etc.) D03760 (Sellafield Design Change Awareness) and D03770 (Sellafield Checking & Approvals) completed within the last 3 years. CyBOK foundations/ Industrial Cyber Security Professional (SANS/ QA) or recognised qualification in Industrial Cyber Security. Degree Qualified in Electrical / Electronic Engineering City and Guilds 2382 - Understand the Requirements of Electrical Installations BS 7671:2018 (2022) Professional registration with a relevant institute (I.e IET, IoP, InstMC) JBRP1_UKTJ

Engineering Apprentice The Army - United Kingdom From £26,334 a year Want to get paid to learn skills for life? As a full-time soldier, entry-level Engineering role, youll: • Keep the Armys equipment working and ready to use, • Build bridges, repair roads, and rebuild infrastructure across the world, • Study for advanced trade qualifications in plumbing and electrical engineering To qualify, you must be between 16 years 6 months and 35 years 6 months and pass a basic fitness test. Set yourself up for life. During your initial training, youll earn £18,687, after which your salary will rise to £23,496. Youll also receive 30 days annual leave every year (plus bank holidays and extra leave after operations), free medical and dental care, cheaper living costs, and free gym and sports facilities. And unless you're away on operations or training exercises, you'll normally work 8.30am to 5pm, Monday to Friday. From your very first day of training with us, youll be gaining transferrable skills skills that could set you up for life. You dont need to know how to do the job before you get here, because well give you all the entry-level training you need. Plus, youll get to travel the world, taking part in the Armys adventurous training, and spending dedicated time playing the sports you love. Get skills, get qualified, get confident. You Belong Here. JBRP1_UKTJ

Location:Newcastle Company:Chippindale Plant Job Type:Full-time Are you a skilled fitter with a passion for plant and machinery maintenance? Chippindale Plant is looking for a dedicated MobileFitterto join our team. This is a fantastic opportunity to work with a respected name in the industry, where your technical expertise will help keep our fleet running safely and efficiently. About the Role As a Mobile Fitter, youll be responsible for inspecting, servicing, and repairing a wide range of plant machinery and equipment. Although the majority of your time will be mobile attending site breakdowns you will also spend time in the workshop. Youll play a key role in ensuring all equipment is safe, reliable, and ready for usewhether its new to the fleet or returning from hire. Key Responsibilities • Inspect machinery for defects and safety compliance, • Perform routine servicing and maintenance, • Diagnose faults using reports and specialist tools, • Dismantle, repair, and reassemble components, • Conduct safety checks on new equipment before first use, • Maintain accurate service records and escalate major faults, • Operate lifting equipment in line with LOLER regulations, • Carry out basic welding and use hydraulic presses, • Keep the workshop clean, safe, and organised, • Follow all Health & Safety proceduresQualifications & Experience, • Proven experience diagnosing and repairing plant, machinery, or lifting equipment, • Strong understanding of hydraulic systems and basic electrical skills, • Experience using large workshop equipment and specialist tools, • NVQ Level 3 in Plant & Machinery or Land-Based Engineering (desirable), • Manufacturer training on industry products (advantageous)Person Specification, • Strong fault-finding and problem-solving skills, • Able to work independently and as part of a team, • Safety-conscious with a methodical approach, • Good communication and record-keeping skills, • Physically fit and comfortable with manual work Interested? If youre ready to take the next step in your career and join a company that values craftsmanship and reliability, wed love to hear from you. Apply Now! JBRP1_UKTJ

At Valeo Foods UK we bring together a family of much-loved UK food brands supported by the scale and ambition of a global investment partner. From Kettles bold crunch to Rowses natural sweetness, through to Matthew Walker and Barratt Sweets, our portfolio blends heritage, craft and category-leading innovation. Alongside our branded portfolio, we are also one of the UKs largest suppliers of private label products, partnering with major retailers to deliver quality and category expertise that meets the needs of millions of households every week. As a business, were on a journey of transformation. Were strengthening our operations, driving quality and investing in our people. Its an exciting, fast-moving environment where heritage meets new thinking, and where every colleague contributes to shaping the future of food across the UK. Join us and play your part in building the next chapter of some of Britains most loved brands. Job Description Multi-skilled Engineer - Electrical Bias - Based at Gateshead 4 on 4 off, 6am till 6pm and 6pm till 6am (rotating shifts) We're Hiring Electrically biased Multi skilled Engineers Join Us in Gateshead! Valeo Foods UK is on the lookout for talented Multi skilledEngineersto join our team at ourGateshead site home of the much-lovedtortilla crisps and rice cakes. If you're passionate about engineering, thrive in a fast-paced manufacturing environment, and want to be part of a positive can do team that keeps some of the UKs favourite snacks on the shelves, wed love to hear from you! What you'll be doing: • Daily repair of machinery and carrying out proactive tasks when possible, • Planning and Monitoring machine performance, • Monitoring failure, • Supporting External Contractors, • Technical support for production when required, • To maintain the highest standards in housekeeping, adopting a clean as you go policy., • H&S and safe work practices, • Food safety, minimizing day to day risks with running of the plant and involving contractors, • Plan is king, ensure that the company can hit its required targets, • Firefightingmachinery / site services upkeep and carrying out ongoing maintenance PPM in a timely manner, • Promote and contribute to the continuous improvement of the running of the company, • Minimize down time, • Train / guide production staffin the correct way to treat our machinery and help train our maintenance technicians from within our department., • Work on projects as allocated by the Engineering Manager, • Any other duties as requested by the Engineering ManagerQualifications, • Relevant Electrical Engineering qualification with basic mechanical skills, • Able to prove competency in all forms of isolation and electrical safety, • Proactive / use your own initiative, • Experience of FMCG operations, • 4 on 4 off, 6am till 6pm and 6pm till 6am (rotating shifts), • Excellent Career Opportunities, • Matched pension scheme up to 10%, • Death in service, • Cycle to work scheme, • Retailer discount platform, • Staff discount, • And plenty more! JBRP1_UKTJ

A leading chemical manufacturer is seeking an EC&I Technician to join their Manchester site on a permanent basis. This role offers a competitive salary starting at £42,000 per annum along with an attractive benefits package including a double-figure employer pension contribution, free on-site parking, company part-subsidised private healthcare, and excellent holiday allowance. As an EC&I Technician, you will be responsible for the maintenance, fault finding, and repair of electrical, control, and instrumentation systems across a high-hazard COMAH chemical manufacturing facility. You will play a key role in ensuring the safe, reliable, and compliant operation of plant equipment through planned preventive maintenance, breakdown response, and support to ongoing improvement activities. Key Responsibilities: • Carry out planned, corrective, and breakdown maintenance on electrical systems across the site., • Work in full compliance with site permit-to-work systems., • Diagnose faults and troubleshoot issues across electrical and instrumentation equipment in hazardous areas., • Use the CMMS system to process work orders, record time, and support preventive maintenance planning., • Support improvement works and minor modifications in line with engineering and site standards., • Assist with wider engineering activities across the site as required., • Time-served Electrical / Instrument Maintenance Technician with demonstrable experience in a chemical manufacturing or similar high-hazard industrial environment., • NVQ Level 3 (or equivalent) in Electrical Installation or a related discipline., • 18th Edition (BS 7671) qualified., • Strong diagnostic and fault-finding skills across electrical and instrumentation systems., • Good communication skills and the ability to prioritise work effectively. JBRP1_UKTJ

JOB TITLE: M&E Coordinator DIVISION Civil Engineering LOCATION Midlands with travel within the UK as required BENEFITS Car Allowance, Pension Scheme, Life Assurance, 35 days holiday + more Are you an experienced M&E professional ready to shape the delivery of major civil engineering projects across the UK? GRAHAM is seeking a skilled M&E Coordinator to join our Civil Engineering division, supporting high-profile projects throughout the Midlands and beyond. This is an exciting opportunity for someone with strong electrical experience, particularly within highways, utilities, or rail environments, to play a key role in coordinating complex M&E packages from design through to commissioning. If you thrive in dynamic site environments, enjoy working collaboratively with multidisciplinary teams, and are looking to progress your career within a forward-thinking, people-focused organisation, wed love to hear from you. Some of the key responsibilities of the M&E Coordinator: • Early identification of potential project risks and taking appropriate mitigation action in accordance with contract requirements., • Liaising with clients and their consultants/representatives as part of the project management structure., • Implementation and compliance with client site safety rules., • Providing M&E technical input and advice as required for live projects and tenders., • Coordinating any temporary M&E services required., • Providing M&E construction methodology input and incorporating in the programme where required., • Managing the Quality of all aspects of the M&E works, checking contractor Quality plans and assisting with the development of Inspection & Testing Plans, • Managing the flow of information from the M&E design team and subcontractors and advising the project team of any impact on progress and programme., • Providing necessary information to the Procurement Department to enable the procurement of materials and subcontractors., • Preparation and submission of handover documents including, when necessary, appointing independent commissioning managers and overseeing the development of commissioning records., • Introducing improvements and innovations, where appropriate., • Experience of working on Civil Engineering Highways & Utility construction projects and/or experience of Industrial construction projects., • Having an understanding of the construction process, such that designs are developed with appropriate regard for buildability., • Possessing a sound technical understanding of M&E industrial and major utility applications., • Effective Communication skills., • Customer Focused and Team Player., • Experience of planning and coordinating M&E subcontractors in civil engineering contracts., • Good awareness and application of commercial forms of contract. JBRP1_UKTJ

Location: Bolton Contract: Permanent Working pattern: 4 on 4 off Salary: Up to £60,000 Are you an Engineering Team Leader or Lead Engineer with experience of working in a manufacturing environment and looking to progress or up for a new challenge? Due to continued growth and investment in our Engineering-led manufacturing sites, we have an opportunity for an Engineering Team Leader to support our bakery in Bolton. As a key part of our Engineering team, you'll engage and motivate a skilled team of engineers, utilising root cause analysis to identify and prioritise corrective, preventative, predictive and mitigating actions. The Recipe At our Bakery here in Bolton, the team are dedicated to delivering unbeatable quality in a safe manner with highly reliable equipment. We are proud to be leading and developing a collaborative, creative and responsive team at the cutting edge of engineering innovation. In this role you will lead, motivate, and manage a team of multi skilled engineers to drive a culture that delivers plant reliability, product quality, and safety in line with company standards. Working with the Engineering Manager you will have accountability for delivering the engineering strategy, via planned, corrective and reactive maintenance work. The Role Reporting to the Engineering Manager youll provide both hands-on technical support and day-to-day leadership, driving a culture of safety, teamwork, and continuous improvement. • Lead, coach, and develop a team of engineers, ensuring high standards of performance, engagement, and professional development., • Coordinate and deliver planned, preventative, and reactive maintenance to minimise downtime and improve line efficiency., • Ensure all engineering activities are carried out safely, in line with company policies, Health & Safety regulations, and Food Safety standards., • Manage priorities using the sites CMMS system logging, tracking, and closing work orders accurately., • Conduct root cause analysis (RCA) and implement corrective actions to prevent reoccurrence., • Support continuous improvement initiatives, driving reliability, efficiency, and cost savings., • Collaborate closely with Production, Quality, and Technical teams to ensure smooth daily operations., • Participate in audits, compliance checks, and engineering project delivery., • Time-served Engineering Apprenticeship, HNC/HND, or Degree in Mechanical, Electrical, or Multi-skilled Engineering., • Proven experience in a maintenance or leadership role within an FMCG, food, or manufacturing environment., • Strong background in managing, motivating, and developing engineering teams., • Strong understanding of engineering safety, risk assessments, and permit-to-work systems., • Knowledge of Food Safety, Hygiene, and GMP standards., • Excellent problem-solving and root cause analysis skills., • Effective communicator with the ability to work cross-functionally and build strong working relationships., • Well-organised, adaptable, and capable of managing multiple priorities in a high-pressure environment., • A slice of the annual profits (discretionary profit share), • Family time is important to us so as well as your holiday entitlement, we'll give you the opportunity to purchase up to an extra weeks annual leave, • Award winning pension scheme with company contributions of 7%, • Life assurance, • Products you will love along with deals and discounts for you and the family through our Extra Dough website, • Continued investment in your personal development, • Fully stocked kitchens filled with our delicious products for you to enjoy with your daily brew! JBRP1_UKTJ

About The Role Right across infrastructure, theres a requirement to not only maintain, but also renew and reimagine. Whatever stage youre at in your career, with us youll have an opportunity to grow and develop. Delivering essential infrastructure services for life, while being safety first, and client and customer centric in a friendly, fun and respectful environment where you are encouraged to thrive. Where will you be working? We help our clients safeguard the water supply, improve environmental performance and manage demand for future generations. We enhance and extend asset life, ensuring compliance with water quality and environmental standards. Were problem solvers with over 140 years of combined experience in engineering and infrastructure. This role will be within ourMEICA and capital maintenance team.Our Mechanical, Electrical, Instrumentation, Control & Automation (MEICA) experts offer a one-stop solution, including ongoing operation and maintenance services. Want to be a part of it? What will you be doing? Youll be responsible for the delivery of preventative maintenance of electrical systems, controls and instrumentation. Youll perform reactive and corrective maintenance, fault finding, and repairs. Youll replace and calibrating instruments, installing new systems and equipment, and commissioning, all in line with BS7671 18th Edition standards. Youll ensure compliance with The Health and Safety at Work Act 1974 Youll adhere to industry, British, International, and customer standards, as well as M Group Policies, Procedures, and Safe Systems of Work. Youll be working across various sites, utilising your M Group van and company fuel card. What youll bring • Have you successfully completed ONC/HNC in engineering (or equivalent), NVQ, or C&G Level 3 Electrical 18th Edition qualification?, • Do you have industrial experience?, • Have you got proven experience in instrumentation and telemetry connection?, • Can you demonstratecommitment to safety and adherence to safety protocols?, • Contributory pension scheme, • Online GP service, 24 hours a day, 365 days a year, • Employee assistance programme, • My Rewards portal, access to 1000s of retail discounts, • Life assurance, • Cycle to work, salary finance and give as you earn schemes, • Enhanced maternity, paternity leave and adoption leave, • Reward and recognition schemeIn addition, this role offers;, • Company van/vehicle and fuel card for business use, • 25 days annual leave plus bank holidays, • Wereresponsibleand go further for our people, clients, communities and the planet, • Wereopenand seek new and better ways of exceeding expectations, • Weretogetherand as one team; the whole is greater than the sum of the parts #MGroupW JBRP1_UKTJ

We are seeking an experienced Plant Fitter to join a well-established plant hire and machinery services business known for supplying high-quality equipment across the region. Operating from a busy depot in Whickham, this role offers a balance of workshop-based repairs and mobile call-outs to customer sites. You'll be part of a skilled engineering team supporting a modern fleet of heavy plant and construction machinery. A fully equipped company vehicle is provided for mobile duties. Role Overview • Carry out servicing, repairs, and diagnostics on a wide range of heavy plant equipment, • Work both in the workshop and on customer sites as required, • Respond to breakdowns and perform on-site repairs using a company van, • Conduct routine maintenance to manufacturer standards, • Complete job cards, service reports, and parts requisitions accurately, • Ensure all work is carried out safely and efficiently, • Represent the business professionally during customer visits, • Proven experience working on heavy plant machinery (excavators, dumpers, rollers, telehandlers, etc.), • Strong mechanical, hydraulic, and electrical fault-finding skills, • Ability to work independently on mobile jobs and as part of a workshop team, • Full UK driving licence, • Good communication and customer-facing skills, • £15.50 - £16.00 per hour - dependant on experience, • Monday-Friday, 7:00-16:30, • Overtime available at time and a half, • Company vehicle provided, • Paid from your front door when travelling directly to site, • Opportunities for progression and manufacturer training JBRP1_UKTJ

Senior Robotics Software Engineer (Flight Software) Location: Remote (with a monthly visit to our Oxfordshire or London offices) Reporting to: Head of Engineering Contract: Permanent, Full Time About the Role We are an ambitious, fast-growing start-up seeking a talented Senior Robotics Software Engineer (Flight Software) to join our team. We are building cutting-edge assurance systems for AI and robotics applications, setting global industry standards to enable complex autonomous systems to operate safely, predictably, and efficiently. In this role, you will play a crucial part in developing the software components that enable the safe and reliable operation of AI-enabled robotics and autonomous systems within our core product line. You will work on cutting-edge technologies that are shaping the future of AI and robotics safety. Key Responsibilities • Design, develop, and implement robotic software components and algorithms for perception, planning, control, and decision-making., • Collaborate with cross-functional teams, including embedded software engineers, systems architects, and AI/ML experts, to seamlessly integrate software components into the overall system., • Conduct rigorous testing, optimisation, and validation of robotic software components to ensure strict compliance with safety and performance requirements., • Contribute to the continuous improvement of the team's software development processes, tooling, and methodologies for robotic systems., • Stay up to date with the latest advancements in robotics software, algorithms, and frameworks, applying them to enhance product capabilities., • Mentor and provide technical guidance to junior software engineers and interns. Key Skills and Experience • Bachelor's or Master's degree in Computer Science, Aerospace, Robotics, Electrical Engineering, or a related field (with a strong focus on robotics software development)., • Proven track record of developing software for robotic systems and delivering safety-critical or mission-critical systems., • Proficiency in C/C++ and Python, with solid experience in robotics frameworks (e.g., ROS, Gazebo, MoveIt)., • Strong knowledge of robotics algorithms and techniques, including perception, planning, control, and decision-making., • Solid understanding of software development methodologies, such as Agile, Continuous Integration (CI), and Test-Driven Development (TDD)., • Strong problem-solving, analytical, and debugging skills., • Excellent communication and collaboration abilities to work effectively within cross-functional teams., • Security Clearance: Must currently hold or be eligible to obtain a minimum of UK SC clearance., • Desirable: Experience with safety-critical software development standards and certification processes (e.g., DO-178C, ISO 26262, IEC 61508) is highly advantageous. Working Culture & Values We are driven by the satisfaction of building solutions to some of the most challenging problems in the industry. As a start-up, we move fast together, embracing collaboration and change. You will thrive here if you enjoy taking ownership, wearing multiple hats, and learning quickly. We expect commitment—including working beyond core hours when the work demands it to maintain momentum—but we foster a highly supportive and constructive environment for you to grow. • Be Safe: We exist to make autonomous systems as safe as possible, maintaining the highest standards of safety and security internally., • Be Curious: We explore the art of the possible—dreaming, prototyping, and testing at the cutting edge of engineering., • Be Committed: We are building something from the ground up, and we want people who are genuinely energised by that journey. Benefits & Compensation We offer a competitive compensation package alongside excellent benefits, including: • Salary sacrifice pension with a 5% matched company contribution, • Generous holiday allowance, • EV Car Scheme, • Cycle to Work Scheme, • More exciting benefits to come as we scale and grow!

Start Your Career as a Trainee Field Service Engineer with Hotpoint Are you ready to launch a hands-on career with one of the UK's most trusted appliance brands? Hotpoint is offering an exciting opportunity to train and qualify as a Trainee Field Service Engineer. No experience? No problem - we'll give you all the training you need to succeed! If you enjoy fixing things, love working with your hands, and want a job where every day is different, this could be the perfect fit for you. About the Role As a Trainee Field Service Engineer, you'll be out on the road, visiting customers' homes to diagnose and repair household appliances. You'll be the friendly face of Hotpoint, helping people get their appliances back up and running. What you'll be doing: Driving your own Hotpoint van to customer appointments Diagnosing and repairing appliances like tumble dryers, electrical cookers, washing machines Providing top-notch customer service Managing your tools and spare parts stock Promoting our trusted Hotpoint products Your Training Journey We'll fully support you from day one with a blend of classroom learning, hands-on experience, and on-the-job training: Welcome Induction (2 days) - Meet your team, collect your equipment, and learn key safety info Shadowing - Join an experienced engineer on the road to see the job in action Phase 1 Training (2 weeks) - Technical training at our specialist centre in Peterborough On-the-Job Learning (6 - 9 months) - Build your skills with real customers Phase 2 Training (1 week) - Level up your knowledge learning another appliance What You'll Need We're looking for people who are: Passionate about customer service Interested in electrics, mechanics, or hands-on problem-solving Hold a full UK manual driving licence Physically fit - able to move and lift appliances Eligible to work in the UK No previous field engineering experience is required - just a great attitude and a willingness to learn! What's In It for You? Pay: £27,377 - £28,532 per year (daily rate equivalent via umbrella company) Bonuses: Commission + overtime opportunities Vehicle: Fully equipped company van + fuel card Time Off: 20 days holiday + bank holidays increasing to 25 days once permanent Benefits: Access to Perkbox (discounts, perks & treats) Progression: The chance to move into a permanent role within 12 months with even more rewards Why Choose Hotpoint? Learn from the best with industry-leading training Join a globally respected brand trusted by millions Enjoy a secure career path with opportunities to grow Be part of a team that values skill, effort, and dedication Ready to Apply? This is more than just a job - it's the start of a long-term career where you'll learn new skills, meet great people, and be proud of what you do. Hit Apply and take the first step to becoming a fully qualified Field Service Engineer with Hotpoint. For further information please contact Sheona

We are seeking an experienced Maintenance Manager to oversee and optimise maintenance operations within a fast-paced FMCG environment. This role requires a proactive leader with a strong technical background to ensure operational efficiency and reliability. Client Details Michael Page is working with working with an innovative FMCG Manufacturing business based near Liverpool. We are seeking an experience Maintenance Manager to lead the engineering, maintenance, and facilities operations during an exciting period of growth. Committed to product quality and innovation, this organisation supplies its product to throughout the UK and internationally through major ecommerce channels and direct to customer. Description The Maintenance Manager will form a crucial part of the site management team and will be tasked with ensuring maximum equipment reliability through the development and implementation of robust PPM systems. They will ensure optimal facility performance through energy management and sustainability initiatives and will drive continuous improvement through the engineering department. Day to day responsibilities will include: Drive engineering excellence through automation, Industry 4.0 technologies, and continuous improvement methodologies. Build and execute reliability strategies for critical assets. Oversee preventive and predictive maintenance using CMMS and best‑practice frameworks. Ensure optimal facility performance through energy management and sustainability initiatives. Lead compliance with HSE regulations, engineering standards, and building requirements. Coordinate audits and inspections, ensuring timely corrective and preventive action. Champion a proactive safety culture, embedding hazard identification, RCA, and strong safety behaviours. Lead and mentor site engineers. Build a culture of accountability, ownership, and continuous improvement. Manage performance reviews, coaching, and team capability development. Profile The successful Maintenance Manager will posses a range of the following: Time-served Engineer with a minimum HNC in Mechanical or Electrical Engineering. Background in a fast‑paced engineering environment - ideally FMCG Proven leadership skills with experience managing maintenance teams in a fast-paced environment. CMMS knowledge, KPI analysis experience, and understanding of modern maintenance techniques. Knowledge of preventative maintenance strategies and systems. Excellent problem-solving skills and a proactive approach to challenges. Strong communication and presentation skills. Solid understanding of health & safety within a manufacturing environment. Job Offer A competitive salary ranging from £55,000 to £65,000 per annum. A 10% performance-related bonus. A supportive company culture within a fast-paced FMCG environment.If you are ready to take on this exciting opportunity as an Maintenance Manager, apply today to join a forward-thinking team in the FMCG industry