Power plant jobs in OxfordCreate job alerts

Electrical Engineer 12 Month Contract - £40 per hour Inscope Abingdon An exciting opportunity has arisen for an experienced Electrical Technician / Electrical Engineer to join a highly advanced engineering environment supporting complex electrical systems across a major technical facility. This role offers the chance to work on a diverse range of plant and equipment including control systems, power... ZIPC1_UKTJ

Electrical Technician Oxfordshire 12-Month Contract Inside IR35 £40.00 p/h Umbrella Full-Time Onsite BPSS Clearance Required We are currently recruiting for an experienced Electrical Technician to join a highly advanced engineering and scientific facility based in Oxfordshire. This role is fully onsite with no hybrid working available and offers an excellent opportunity to work within a complex industrial environment supporting a wide range of electrical systems and plant equipment. Key Responsibilities: • Carry out electrical installation, maintenance, inspection, testing, fault finding and repair activities • Support the build and commissioning of new electrical plant and equipment • Work across control systems, distribution systems and power conversion systems • Assist with diagnostics and repairs on electrical and control equipment • Produce and maintain technical documentation and safe systems of work • Support ongoing operational and maintenance activities across the facility • Work closely with engineering teams and Plant Responsible Officers to ensure safe and effective delivery of work Essential Requirements: • C&G 2330 Level 3 Certificate in Electrotechnical Technology or equivalent (ONC/HNC in Electrical or Electronic Engineering also considered) • 18th Edition Wiring Regulations • Apprentice-trained with industrial ele...

C&I Technician (Control & Instrumentation) 1 year Contract Oxfordshire IR35: Inside Minimum Requirement: The purpose of this role is primarily expected to provide C&I Technician (Control & Instrumentation) support to the MAST-U facility working across different groups, and on a wide range of control and instrumentation systems. This shall include working both within a workshop environment and on industrial plant to both construct and repair C&I systems, perform bench testing and fault finding. The Role: Perform fault finding and repairs to C&I system under supervision, both with and without written test procedures. Provide C&I wire person/panel builder support to Plant Responsible Officers (PROs); to support fault finding and repair work on C&I systems associated with the MAST-U facility. Procure, build, test and commission new plant and equipment (i.e. cubicles, sub racks/assemblies and electronic cards) to defined requirements. Take ownership of technical delivery of tasks. Be capable of undertaking delicate and fragile work e.g., thermocouple connections. Generate and maintain appropriate documentation relevant to the above tasks including writing safe systems of work.Essential Qulations. Apprentice trained with relevant experience working in an industrial environment on 3-phase power systems. C&G2330 Level 3 Certificate in Electrotechnical Technology or equivalent qualifications such as an ONC/HNC i...

Job Title: Electrical Technician Location: Culham, Oxfordshire - on site Contract Duration: 12 Months Daily Rate: £ 40/hr (Umbrella – Maximum) IR35 Status: Inside IR35 The Role The purpose of this role is primarily expected to provide electrical technician expertise to the facility working across different teams, and on a wide range of plant from control systems, power conversion systems and through to electrical distribution (LV/HV). This shall include the construction of new equipment, maintenance of existing equipment, fault finding and implementation of repairs. The exact duties will be determined by the individual’s skills and experience. Support Authorised electrical testers inspecting and testing electrical equipment to ensure compliance with the BS7671: Requirements for Electrical Installations and Codes of Practice. Provide electrical technician expertise to Plant Responsible Officers (PROs); to be hands-on supervisor for electrical installation, maintenance and repair work on plant such as control systems, distribution systems and power conversion systems. Assist with fault finding and repairs to controls systems within cubicles and plant under limited supervision. Able to take ownership of technical delivery of tasks. Capable of undertaking delicate and fragile work e.g., thermocouple connections. Work under supervision to fault find on large power conversion systems. Assist with the build and co...

ELECTRICAL TECHNICIAN CCL Global are currently recruiting for an Electrical Technician to support a highly advanced research and engineering environment within the UK’s energy sector. This role offers the opportunity to work on cutting-edge systems within a complex, high-integrity facility. Type of Contract: Contract (Inside IR35) Location: Oxford, Abingdon (100% onsite) Contract Length: 12 months Key Duties Will Include: Carry out installation, maintenance, and repair of electrical systems across a range of plant equipment. Support fault finding and diagnostics on control systems, power conversion systems, and electrical distribution (LV/HV). Assist in the build and commissioning of new electrical equipment and systems. Work closely with engineers and Plant Responsible Officers to deliver technical tasks safely and effectively. Support inspection and testing activities in line with BS7671 and relevant codes of practice. Produce and maintain technical documentation, including safe systems of work. Undertake hands-on work involving both robust and delicate electrical components (e.g. instrumentation and thermocouples). Requirements: Apprentice-trained Electrical Technician with experience in industrial environments. Strong experience working on 3-phase power systems. Level 3 qualification in Electrotechnical Technology (e.g. C&G 2330) or ONC/HNC in Electrica...

Electrical Technician Contract (Inside IR35) Up tp £40.00 per hour (Umbrella) Location: Abingdon, Oxfordshire (Full-Time Onsite) Duration: 12 Months Deadline to submit: 21st May AM Ceto Talent representing a leading UK-based organisation at the forefront of advanced Nuclear energy and engineering research. Overview We are seeking an Electrical Technician to support a major experimental engineering programme, working across a wide range of complex electrical plant and systems. This is a hands-on role covering installation, maintenance, fault finding and commissioning across control systems, power conversion equipment, and LV/HV electrical distribution within a highly regulated, safety-critical environment. Key Responsibilities Carry out installation, maintenance, fault finding, and repair of electrical systems and equipment Work across control systems, power conversion systems, and LV/HV distribution Support inspection and testing of electrical systems in line with BS7671 and internal codes of practice Provide technical support to Plant Responsible Officers (PROs) and wider engineering teams Supervise and support electrical installation, maintenance, and repair activities on plant systems Assist with fault finding on control systems within panels, cubicles, and plant equipment Support fault finding on large power conversion systems under supervisi...

Electrical Site Based Engineer Role Overview: We are seeking an experienced Static Engineer with a strong Electrical bias to lead our on-site delivery within a live hospital environment in Oxford. The successful candidate will be responsible for the planned and reactive maintenance of electrical building services systems, ensuring full compliance with healthcare standards and maintaining a safe, operational environment for patients, staff, and visitors. This is a site-based role (no mobile travel), supporting critical healthcare infrastructure. Key Responsibilities: Planned Preventative Maintenance (PPM) Carry out PPM tasks in accordance with contract schedules, HTM guidance, and SFG20 standards Electrical maintenance including: LV distribution systems Distribution boards and sub-main circuits Lighting and emergency lighting systems UPS systems and standby power systems Generators and associated controls Isolators, contactors, relays, and control gear Small power and containment systems Fire alarm interface awareness Basic BMS operation and interrogation Associated building services support: Electrical fault finding on mechanical plant and HVAC controls Motors, pumps, AHUs, FCUs, and control panels Ensure all statutory compliance checks are completed and recorded correct. Reactive Maintenance Respond promptly to electrical breakdowns and faults across site Diagnose and repair electrical faults efficiently with minimal disr...

Are you an experienced Industrial Electrician looking to work in a highly advanced engineering and technical environment? We are seeking skilled electricians to support maintenance, installation, and operational activities within a complex industrial facility. This is an exciting opportunity to work on large-scale plant systems, specialist equipment, power distribution networks, and cutting-edge engineering infrastructure within a safety-critical environment. The Role You will be responsible for carrying out electrical maintenance, fault finding, installation, and commissioning activities across a wide range of industrial systems and equipment. The role involves both planned preventative maintenance and reactive support to ensure operational reliability and safety standards are maintained at all times. Key Responsibilities Planned and reactive maintenance on industrial electrical systems Fault finding and repair of motors, drives, switchgear, and control systems Installation and commissioning of electrical equipment and plant systems Reading and interpreting electrical schematics and technical drawings Supporting shutdowns, upgrades, and engineering projects Working safely within permit-to-work and isolation procedures Maintaining accurate maintenance documentation Collaborating with engineers, technicians, and contractors across site What We're Looking For 18th Edition Wiring Regulations Proven industrial electrical...

Other organisations may call this role Senior Electrical Engineer, Senior Electronic Engineer, Lead Power Systems Engineer, Lead Electrical Systems Engineer, High Voltage Engineer, Power Electronics Engineer, or Electrical Plant Engineer. Electrical / Electronic Engineer. A degree in Electrical/Elec

Other organisations may call this role Senior Electrical Engineer, Senior Electronic Engineer, Lead Power Systems Engineer, Lead Electrical Systems Engineer, High Voltage Engineer, Power Electronics Engineer, or Electrical Plant Engineer. Electrical / Electronic Engineer. As an Electrical / Electron

This contractor role offers an exciting chance to work within a highly advanced engineering environment, supporting maintenance, installation, and operational tasks. The ideal candidate will engage with large-scale plant systems, specialized equipment, and power distribution networks, ensuring smoot

Other organisations may call this role Senior Electrical Engineer, Senior Electronic Engineer, Lead Power Systems Engineer, Lead Electrical Systems Engineer, High Voltage Engineer, Power Electronics Engineer, or Electrical Plant Engineer. Electrical / Electronic Engineer. To be considered as an Elec

C&I Wire Person / Panel Builder 12 Month Contract - £26/hr - In-Scope Abingdon We're looking for an experienced C&I Wire Person / Panel Builder to join a highly technical engineering environment supporting advanced control and instrumentation systems across a major operational facility. This is an excellent opportunity for someone with strong panel wiring, assembly and fault-finding experience who enjoys hands-on technical work across both workshop and live plant environments. As The C&I Wire Person You'll support the build, maintenance, testing and repair of a wide range of control and instrumentation systems, working closely with engineering and operational teams on complex technical equipment. Key responsibilities include: Carrying out wiring, assembly and panel build activities for C&I systems Supporting fault finding and repair work on instrumentation and control equipment Building, testing and commissioning electrical cubicles, sub-racks, assemblies and electronic cards Performing bench testing and on-site fault finding activities Supporting Plant Responsible Officers (PROs) with maintenance and technical tasks Producing and maintaining technical documentation and safe systems of work Taking ownership of technical delivery and ensuring work is completed safely and accurately Undertaking delicate electrical work including thermocouple connections Experience Apprentice trained with industrial electrical experience Experience working on 3-phase power systems within an industrial environment Strong panel wiring and control system assembly experience C&G 2330 Level 3 in Electrotechnical Technology or equivalent ONC/HNC in Electrical or Electronic Engineering also considered 18th Edition Wiring Regulations qualification Ability to read and work from engineering drawings and schematics Desirable Experience Experience within highly regulated or technical engineering environments Exposure to instrumentation systems and industrial controls Fault finding on control panels and electronic assemblies Experience producing technical and safety documentation This role would suit candidates from sectors such as manufacturing, nuclear, aerospace, defence, automation, power generation or specialist engineering environments. If you're a skilled C&I Wire Person or Panel Builder looking for your next long-term contract opportunity, apply now. Services advertised by Gold Group are those of an Agency and/or an Employment Business. We will contact you within the next 14 days if you are selected for interview. For a copy of our privacy policy please visit our website

Combined Small Works Manager & Buyer (R4) We are seeking an organised and proactive Small Works Manager & Buyer to oversee small works projects while managing procurement activities across both small works and main projects. This role is ideal for someone with strong coordination and problem-solving skills who can build and maintain excellent relationships with clients, engineers, and suppliers. You will play a key role in ensuring projects run smoothly by managing electrical works and sourcing materials efficiently and cost-effectively, all while upholding high standards of quality and service. Key Responsibilities – Small Works Oversee small works projects, maintenance, and remedial works for domestic and commercial clients (typically £250+), with an annual turnover of approximately £400k Act as the primary point of contact for small works clients, managing requirements, expectations, and communication throughout the project lifecycle Manage incoming calls and emails while planning, scheduling, and coordinating multiple small-scale electrical tasks simultaneously Handle reactive maintenance issues and daytime emergency callouts (e.g. power loss), including basic client guidance on fault finding (e.g. tripped RCBOs) Prepare pricing for small works, remedial tasks, EICRs, and installation projects Conduct site surveys for larger small works packages to produce accurate and competitive quotations Monitor and manage the performance of small works engineers to ensure high-quality workmanship Ensure all works comply with health & safety regulations and NICEIC certification standards Manage claims, invoicing, and notify accounts when works are ready for billing Raise job numbers for both small works and main projects Maintain and regularly update the main works job chart for accurate tracking Understand engineer capabilities to allocate work effectively based on strengths and experience Log NICEIC Building Control Notifications via the NICEIC portal following certification Support engineers requiring reactive maintenance or callout assistance on wider projects Key Responsibilities – Buyer & Procurement Order materials and equipment for small works and support main project procurement Send site requisitions to wholesalers, carry out price comparisons, and place orders Convert engineer material requests into purchase orders and issue to suppliers Ensure timely delivery of materials to maintain site productivity and avoid delays Manage supplier relationships, negotiate pricing, and ensure reliable service Identify and onboard new suppliers to strengthen the supply chain Carry out occasional store duties, including receiving deliveries and labelling stock Arrange repairs, servicing, and calibration of test equipment and tools Organise plant hire and access equipment as required Occasionally collect and deliver materials to sites when necessary Qualifications & Knowledge Proficiency in Microsoft Office 365, particularly Excel Good understanding of construction and electrical environments Relevant qualifications in Electrical Engineering, Construction Management, or a related field Strong organisational ability, with experience managing multiple small works projects alongside procurement responsibilities NICEIC Qualifying Manager status or C&G 2391 (advantageous) Willingness to progress into the role of NICEIC Qualifying Supervisor for small works certification sign-off Full UK driving licence What We Offer Competitive salary Opportunities for professional development and career progression Supportive and collaborative working environment Exposure to a diverse portfolio of commercial and industrial projects Company van or car allowance 24 days holiday plus bank holidays

Job Title: Multi Skilled Shift Engineer (Electrical Bias) Working for a leading global provider of integrated facilities and corporate real estate management. We are recruiting a Multi Skilled Shift Engineer (Electrical Bias) to join the team located in Oxford. The job purpose is to carry out planned preventative maintenance, reactive works to building plant, equipment and systems in accordance with agreed service levels, undertake small installation works and respond to site engineering emergencies. Key Tasks Ensure that routine maintenance is carried out to all electrical / Mechanical systems to meet and exceed expectations, and agreed service level agreements. Carry out reactive repairs on all systems as required calling relevant sub-contractors as required. Carry out all PPM maintenance as per the instruction set provided within Concept. Reporting of all PPM defects via KPMG defect process and liaise with the supervisor of defect requirements. Ensure weekly equipment reports are updated with any change in status of equipment. Liaise with sub-contractors as required for repairs / quotations, monitoring performance of sub-contractor personnel. Ensuring works have been undertaken correctly and work area has been left in a satisfactory condition. Sign off completed PPM and reactive tasks via your PDA in line with KPMG policies and procedures in a timely manner. Ensure a professional image of the company is presented to clients and visitors, and ensure excellence in customer service is delivered and promoted at all times. Establish and maintain a good working relationship with the client representative and clients personnel. Ensure the provision of a safe & healthy working environment, and ensure compliance with all company policies and procedures, as well as client site policies, procedures and working arrangements, as required. To accurately maintain the site logs and associated paperwork. To be involved in call out rota if applicable Understand and maintain the all systems on site Liaise and work with other trade engineers to ensure electrical issues on all systems are attended to and resolved within SLA agreements Ensure a professional image of the company is presented to clients and visitors, and ensure excellence in customer service is delivered and promoted at all times. Ensure that professional and technical skills are maintained through a commitment to personal development and life-long-learning. Person Specification Skills A good basic education is essential, with good written and spoken English and basic mathematical skills. Recognized Electrical Qualification C&G 17 th Edition in Electrical Installations C&G Test and Inspection Knowledge Good knowledge of various Building electrical systems and working to Planned Preventative Maintenance Regimes Current and relative knowledge of BS in relation to electrical systems on site Emerg ltg/Fire alarm/ power/BMS etc. Experience Previous working with structured PPM delivery Experience of working with business critical equipment Working within customer focused role. Previous working within health and safety led role Experience of electrical systems management and paperwork Aptitude Committed to the delivery of excellent customer service Able to work under pressure Able to make sound decisions when needed Good timekeeping Must be reliable and able to work without supervision A team player Good Communication Circumstances Able to work within a call out rota Able to work shifts within the contract set up Work between the London region KPMG sites To be available for weekend and out of hours working as required. Core Competencies Competence to Deliver Communication Reliability Innovation TPBN1_UKTJ

About this position: We are working with an innovative and forward-thinking engineering organisation tackling complex technological challenges with real-world impact. They are seeking a highly skilled Electrical Engineer to take ownership of electrical design and on-site implementation for manufacturing process equipment. This role plays a key part in ensuring equipment meets the highest standards of safety, compliance, and performance. The position offers exposure to cutting-edge projects with opportunities to contribute across areas such as control systems, PLC development, instrumentation, and functional safety. Job Responsibilities: • Deliver high-quality electrical design packages from concept through to manufacturing, testing, and commissioning, including modifications to existing systems, • Ensure safe and compliant on-site electrical installations, including contractor and supplier management and sign-off of electrical works, • Support engineering design reviews and risk assessments such as HAZID, HAZOP, LOPA, SIL, and FMEA, • Act as an Authorised Person for Electrical Systems (where trained), ensuring safe systems of work and isolation procedures, • Collaborate with multidisciplinary teams including Controls, Projects, and Process Engineering to support efficient system and process design, • Set and maintain standards for on-site electrical installations, including wiring practices, labelling, and documentation, • Carry out site-based electrical engineering activities such as surveys, system modifications, and functional testing, • Apply engineering calculations and analysis to validate electrical system performance and design outcomes, • Support knowledge sharing and development by mentoring and training team members in electrical engineering principles Experience Required: • Proven experience delivering electrical design solutions for machinery or plant equipment from concept through to delivery, with a strong focus on safety, • Experience using electrical design software such as EPlan, AutoCAD Electrical, or SolidWorks Electrical, • Strong understanding of relevant standards such as EN 60204 and BS 7671, • Degree in Electrical Engineering (or related discipline) or equivalent practical experience, • Ability to perform engineering calculations relating to electrical systems (power, heat, flow, etc.), • Strong communication skills with the ability to engage effectively across teams and stakeholders, • Proactive, adaptable, and capable of managing multiple tasks in demanding environments Desirable: • Experience with PLC programming, control systems, instrumentation, or industrial/chemical equipment design, • Familiarity with standards such as ISO 12100, IEC 60364, ISO 13850, • Experience working in industrial or process environments (e.g. chemical plants), • Knowledge of Siemens PLCs and associated hardware, • Functional Safety certification (e.g. TÜV or equivalent), • Experience as an Authorised Person (LV), • Awareness of relevant HSE legislation, • Additional certifications such as First Aid, CPR, or Fire Warden training

We are currently seeking an experienced Electrical Engineer for an exciting contract opportunity within a highly technical industrial and engineering environment based in Oxfordshire. This role offers the chance to work on complex electrical systems, plant upgrades, maintenance projects, and engineering improvements within a large-scale operational facility. The Role The successful candidate will provide electrical engineering support across a range of operational and project activities. You will be involved in electrical design support, fault investigation, commissioning, maintenance planning, and technical problem solving within a safety-critical environment. Key Responsibilities Support electrical engineering and maintenance activities across site Provide technical expertise for electrical systems and infrastructure Assist with design reviews, modifications, and upgrades Carry out fault finding and root cause analysis on electrical equipment Support commissioning and testing activities Review electrical drawings, schematics, and technical documentation Ensure compliance with electrical standards, regulations, and safe systems of work Liaise with multidisciplinary engineering teams and contractors Contribute to project delivery and operational reliability improvements Requirements Degree or HNC/HND in Electrical Engineering or related discipline Proven experience within industrial, manufacturing, process, or engineering environments Strong understanding of electrical power distribution and control systems Experience with industrial plant equipment and maintenance practices Ability to interpret technical drawings and specifications Knowledge of relevant electrical regulations and safety standards Excellent problem-solving and communication skills Desirable Experience Experience working within highly regulated or safety-critical environments HV/LV systems experience PLC, instrumentation, or control systems knowledge Commissioning or project engineering experience Previous experience on large industrial or research facilities Why Apply? Opportunity to work on technically challenging engineering projects Collaborative and professional engineering environment Long-term contract potential Competitive rates and stable workload Exposure to advanced industrial systems and infrastructureIf you are an Electrical Engineer looking for your next contract opportunity within a technically advanced environment, we would like to hear from you. Rullion celebrates and supports diversity and is committed to ensuring equal opportunities for both employees and applicants

Manpower are supporting our reputable client on a 12 months fixed term contract. You will be joining a vibrant, inclusive community in Complex Facilities in the Defence Equipment sector proactively maintaining a fleet of military and commercial MHE and Plant vehicles and other associated ancillaries, both within their engineering capabilities based onsite at a barracks in Abingdon. You will maximise the operational availability of military and commercial MHE, Plant vehicles and other associated ancillaries by investigating, understanding, and eliminating failed/fault operation of those products. What you will do: The service and maintenance of diesel, MOTS (modified off‑the‑shelf) adapted or customised to meet specific requirements and electrical MHE (Material Handling Equipment) and Plant vehicles and other associated ancillaries. Both at outset and as work progresses, liaise with controller and customer on the range of expected work providing clarity and understanding by all parties to ensure the likely timescales and associated costs are understood. Identify the root cause of a breakdown in a timely manner and ensure the correct parts are obtained in the most cost-effective way. Use any available resources to achieve this, including when required the technical team. Carry out inspection/checks on own work as it proceeds and ensure that the equipment performs satisfactorily and is safe before handing back to the customer. Identify any further work required on a machine and ensure the customer is made aware of the fact, especially where a cost to the customer is to be incurred. The engineer should ensure that they maximise any potential revenue for equipment that has been damaged. Complete all related job and service documentation correctly, with necessary signatures/documents obtained from the customer.Successful candidates who achieve Sponsored Reservist Status (trained as a special member of the UK Ministry of Defence's Army Reserve) will have the opportunity to secure a permanent contract. What you will bring: HGV Category C essential Level 3 Apprenticeship (C&G or NVQ Technical Certificate and Functional Skills) in a related engineering function i.e. Vehicle Systems Maintenance/Vehicle Electrics/Electronics/Vehicle Diagnostics/Automotive Engineering/Hydraulics/Power Train Significant experience working in a related engineering function, Car Mechanic, HGV Fitter, Plant Fitter or a formal apprenticeship qualification.Interested? Please forward your CV in the first instance. If you receive suspicious outreach claiming to be from us, please contact us via the ManpowerGroup website

Manpower are supporting our reputable client on a 12 months fixed term contract. You will be joining a vibrant, inclusive community in Complex Facilities in the Defence Equipment sector proactively maintaining a fleet of military and commercial MHE and Plant vehicles and other associated ancillaries, both within their engineering capabilities based onsite at a barracks in Abingdon. You will maximise the operational availability of military and commercial MHE, Plant vehicles and other associated ancillaries by investigating, understanding, and eliminating failed/fault operation of those products. What you will do: The service and maintenance of diesel, MOTS (modified off-the-shelf) adapted or customised to meet specific requirements and electrical MHE (Material Handling Equipment) and Plant vehicles and other associated ancillaries. Both at outset and as work progresses, liaise with controller and customer on the range of expected work providing clarity and understanding by all parties to ensure the likely timescales and associated costs are understood. Identify the root cause of a breakdown in a timely manner and ensure the correct parts are obtained in the most cost-effective way. Use any available resources to achieve this, including when required the technical team. Carry out inspection/checks on own work as it proceeds and ensure that the equipment performs satisfactorily and is safe before handing back to the customer. Identify any further work required on a machine and ensure the customer is made aware of the fact, especially where a cost to the customer is to be incurred. The engineer should ensure that they maximise any potential revenue for equipment that has been damaged. Complete all related job and service documentation correctly, with necessary signatures/documents obtained from the customer. Successful candidates who achieve Sponsored Reservist Status (trained as a special member of the UK Ministry of Defence's Army Reserve) will have the opportunity to secure a permanent contract. What you will bring: HGV Category C essential Level 3 Apprenticeship (C&G or NVQ Technical Certificate and Functional Skills) in a related engineering function i.e. Vehicle Systems Maintenance/Vehicle Electrics/Electronics/Vehicle Diagnostics/Automotive Engineering/Hydraulics/Power Train Significant experience working in a related engineering function, Car Mechanic, HGV Fitter, Plant Fitter or a formal apprenticeship qualification. Interested? Please forward your CV in the first instance. If you receive suspicious outreach claiming to be from us, please contact us via the ManpowerGroup website. TPBN1_UKTJ

Tokamak Operations Manager Culham Science Centre, Abingdon, Oxfordshire, United Kingdom Full-time Company Description Fusion, the process that powers the Sun and Stars, is one of the most promising options for generating the cleaner, carbon-free energy that our world badly needs. UKAEA leads the way in realising fusion energy, partnering with industry and research for ground-breaking advancements. Our goal is to bring fusion electricity to the grid, supported by tomorrow's power stations. In pursuit of our mission, UKAEA embraces core values: Innovative, Committed, Trusted, and Collaborative. As an employee of UKAEA, you will benefit from: • Outstanding defined benefit pension scheme, details of which can be found at the end of this advert - Corporate bonus scheme up to 7% and a Relocation allowance (if eligible) - Flexible working options , including family-friendly policies and the right to request flexible working from the start of your employment - Employee Assistance Programme and trained Mental Health First Aiders - Generous annual leave allowance, starting with 25 days, plus 3 days Christmas closure and 2.5 privilege days, in addition to UK bank holidays - Wide range of career development opportunities - A vibrant culture committed to equality and being fully inclusive What to expect in our recruitment process: For a step-by-step overview of how we hire from application to offer, please see our Recruitment Process page on our website. Job Description The salary for this role is £81,090 (inclusive of a Specialist Allowance). Onsite working is expected for 5 days each week, however, we actively support requests for flexible working. This role will be based from Culham, Oxfordshire. This role requires employees to complete an online Baseline Personnel Security Standard (BPSS) , including The Disclosure & Barring Service (DBS) checks for criminal convictions and possibly a search of open source data. The Role MAST-U, the worlds largest operating spherical tokamak, is a cutting-edge facility used to advance key research needed to bring fusion energy to the grid, and the Tokamak Operations Manager plays a central role in its success. This position is responsible for the safe, reliable, and efficient day-to-day running of the facility, including overseeing operational periods, commissioning, and restarting new plant systems. The role involves leading and coordinating multidisciplinary expert teams to integrate new equipment and capabilities, ensuring operational milestones are achieved, and providing innovative solutions to technical challenges. Additionally, the Operations Manager acts as a key advisor on machine operations for internal and external programmes, engages with stakeholders, and supports the broader fusion research community through collaboration and consultancy. Additional Responsibilities: Be responsible for the delivery of effective, reliable, day-to-day operations of the facility: • Lead coordination meetings to manage tasks, staffing, and delivery of operational periods in line with programme objectives - Guiding the operations team to deliver compliant machine operations through robust operating procedures - Providing clear, measurable goals to define the successful operation of the machine and delivering against them - Acting as the senior point of approval on operations matters for all plant modifications, evaluating and recommending where expenditure areas would benefit efficient operations - Ensuring there is effective communication of the operating schedule and status for the facility to all relevant stakeholders - Reviewing technical aspects of new plant/diagnostics/systems to ensure fitness for operational use - Overseeing the commissioning activities to ensure work is carried out in a safe, effective and efficient manner - Acting as restart manager after shutdowns to deliver the experimental campaign as required by the programme - Monitoring progress of activities affecting operations to ensure interventions are timed to minimise the impact on operations Qualifications Essential Requirements: • MSc or PhD in physics or engineering subject, or equivalent experience in a relevant field - Relevant experience of commissioning and operating a large facility - Significant and demonstrable experience of leading multi-disciplinary technical teams at a national or multinational facility - Proven excellent interpersonal skills with experience working alongside a range of engineering and scientific colleagues - Significant Safety management experience Additional Information For a full list of benefits and to apply, select the apply button to be taken through to the UKAEA careers pages. UKAEAs mission is clean energy for all, and we welcome talented people from all backgrounds to help us achieve this goal. We are committed to equality, diversity, and inclusion and strive to ensure fair representation across our workforce. We particularly encourage applications from groups currently underrepresented in STEM, including women and individuals from diverse ethnic backgrounds, while ensuring all appointments are made on merit. UK Atomic Energy Authority is committed to being accessible. Please contact us if you have any questions or require help or adjustments to compete on a fair basis, for example, changes to the way we interview or share information. Please note that vacancies are generally advertised for 4 weeks, but may close earlier if we receive a large number of applications. TPBN1_UKTJ

Senior C&I Engineer Abingdon Rd, Culham, UK Full-time Salary: £57,117 (inclusive of Specialist Allowance) + excellent benefits, including outstanding pension Division: Plasma Science and Fusion Operations Site Location: UKAEA Culham, Oxfordshire Confirmed Grade: Grade G Department: Tokamak Systems Company Description By 2050, the planet could be using twice as much electricity compared to today. Are you interested in contributing and helping to shape the future of the worlds energy? If so, read on. Fusion, the process that powers the Sun and Stars, is one of the most promising options for generating the cleaner, carbon-free energy that our world badly needs. UKAEA leads the way in realising fusion energy, partnering with industry and research for ground-breaking advancements. Our goal is to bring fusion electricity to the grid, supported by tomorrow's power stations. In pursuit of our mission, UKAEA embraces core values: Innovative, Committed, Trusted, and Collaborative. As an employee of UKAEA, you will benefit from: • Outstanding defined benefit pension scheme, details of which can be found at the end of this advert. - Corporate bonus scheme up to 7% and a Relocation allowance (if eligible). - Flexible working options , including family-friendly policies and the right to request flexible working from the start of your employment. - Employee Assistance Programme and trained Mental Health First Aiders. - Generous annual leave allowance, starting with 25 days, plus 3 days Christmas closure and 2.5 privilege days, in addition to UK bank holidays. - Wide range of career development opportunities. - A vibrant culture committed to equality and being fully inclusive. What to expect in our recruitment process: For a step-by-step overview of how we hire from application to offer, please see our Recruitment Process page on our website. Job Description The salary for this role is £57,117 (inclusive of a Specialist Allowance). Onsite working is expected for 5 days each week, however, we actively support requests for flexible working. This role can be based at any of the following sites: Culham, Oxfordshire. This role requires employees to complete an online Baseline Personnel Security Standard (BPSS) , including The Disclosure & Barring Service (DBS) checks for criminal convictions and possibly a search of open source data. The Role Are you looking for an exciting opportunity to make a difference? Join our team and contribute to the future of fusion energy. As Senior C&I Engineer , you will play a pivotal role in the Machine Control and Protection Team, providing electrical, electronics & control and instrumentation engineering support to machine operations and diagnostics systems. These systems include MAST Upgrade (MAST-U) machine control, real-time & hardwired protection and Personal Access Safety System (PASS). In addition, the team supports any engineering requirement for Diagnostic and Enhancement projects within MAST-U. ? The post holder will troubleshoot, design and deliver high-level electrical systems to optimise and maintain MAST-U operations. The post holder will be responsible for the maintenance and upgrade of critical operational systems and lead activities within MAST-U Integrated Commissioning & Restart. Additionally, you will: • Plan/implement Schneider PLC & iFIX SCADA software/hardware changes, manage configuration control, and ensure all changes are agreed and captured. - Deliver safely and cost-effectively; act as RO/SME for protection subsystems (maintenance schedules, fault support); close out ATO/safe-working actions and coordinate with Beam Control, Diagnostics, Plasma & Z-control, and Power Supplies for safe/efficient ops. - Help define/control-system strategy and spares/stock; review/analyse performance with weekly reporting; act as Project Engineer/Manager for procedures, plant docs, and RAMS; manage suppliers and costs within budget. - Lead multi-disciplinary teams (staff, contractors, apprentices) and work toward appointment as MEiC (MAST-U Engineer in Charge) during operations/engineering periods. Qualifications Essential Requirements: • Degree in Electrical/C&I Engineering or equivalent, or qualified by experience. - Must demonstrate extensive proven experience in programming & fault finding of PLCs, Schneider would be desirable. - Must demonstrate extensive proven experience in design, installation and testing of C&I systems hardware. - Must demonstrate extensive proven experience in electrical control schematics design and the ability to fault find. Desirable Requirements: • Experience with Visual Basic or similar programming languages. - Computer networking literacy. - Understanding of Programmable control systems standard IEC 61131. - Understanding of Functional Safety standards IEC 61508 and IEC 62061. - Experience with cable management software. - Experience with cable and circuit protection sizing. Additional Information For a full list of benefits and to apply, select the apply button to be taken through to the UKAEA careers pages. UKAEA's mission is clean energy for all, and we welcome talented people from all backgrounds who want to help us achieve our mission. We are under-represented from some groups and so want to encourage applications in particular from women in STEM, people from Black British Caribbean and African backgrounds and from Pakistani and Bangladeshi British backgrounds. Our Executive team, supported by our 'Head of Equality, Diversity and Inclusion' (EDI) and Wellbeing, and our EDI Networks actively promote Inclusion and take steps to increase diversity within our organisation. We reinforce best practices in recruitment and selection and evaluate approaches to remove barriers to success. UK Atomic Energy Authority is committed to being accessible. Please contact us if you have any questions or require help or adjustments to compete on a fair basis, for example, changes to the way we interview or share information. Please note that vacancies are generally advertised for 4 weeks, but may close earlier if we receive a large number of applications. TPBN1_UKTJ

Combined Small Works Manager & Buyer (R4) We are seeking an organised and proactive Small Works Manager & Buyer to oversee small works projects while managing procurement activities across both small works and main projects. This role is ideal for someone with strong coordination and problem-solving skills who can build and maintain excellent relationships with clients, engineers, and suppliers. You will play a key role in ensuring projects run smoothly by managing electrical works and sourcing materials efficiently and cost-effectively, all while upholding high standards of quality and service. Key Responsibilities – Small Works Oversee small works projects, maintenance, and remedial works for domestic and commercial clients (typically £250+), with an annual turnover of approximately £400k Act as the primary point of contact for small works clients, managing requirements, expectations, and communication throughout the project lifecycle Manage incoming calls and emails while planning, scheduling, and coordinating multiple small-scale electrical tasks simultaneously Handle reactive maintenance issues and daytime emergency callouts (e.g. power loss), including basic client guidance on fault finding (e.g. tripped RCBOs) Prepare pricing for small works, remedial tasks, EICRs, and installation projects Conduct site surveys for larger small works packages to produce accurate and competitive quotations Monitor and manage the performance of small works engineers to ensure high-quality workmanship Ensure all works comply with health & safety regulations and NICEIC certification standards Manage claims, invoicing, and notify accounts when works are ready for billing Raise job numbers for both small works and main projects Maintain and regularly update the main works job chart for accurate tracking Understand engineer capabilities to allocate work effectively based on strengths and experience Log NICEIC Building Control Notifications via the NICEIC portal following certification Support engineers requiring reactive maintenance or callout assistance on wider projects Key Responsibilities – Buyer & Procurement Order materials and equipment for small works and support main project procurement Send site requisitions to wholesalers, carry out price comparisons, and place orders Convert engineer material requests into purchase orders and issue to suppliers Ensure timely delivery of materials to maintain site productivity and avoid delays Manage supplier relationships, negotiate pricing, and ensure reliable service Identify and onboard new suppliers to strengthen the supply chain Carry out occasional store duties, including receiving deliveries and labelling stock Arrange repairs, servicing, and calibration of test equipment and tools Organise plant hire and access equipment as required Occasionally collect and deliver materials to sites when necessary Qualifications & Knowledge Proficiency in Microsoft Office 365, particularly Excel Good understanding of construction and electrical environments Relevant qualifications in Electrical Engineering, Construction Management, or a related field Strong organisational ability, with experience managing multiple small works projects alongside procurement responsibilities NICEIC Qualifying Manager status or C&G 2391 (advantageous) Willingness to progress into the role of NICEIC Qualifying Supervisor for small works certification sign-off Full UK driving licence What We Offer Competitive salary Opportunities for professional development and career progression Supportive and collaborative working environment Exposure to a diverse portfolio of commercial and industrial projects Company van or car allowance 24 days holiday plus bank holidays

Familiarity with systems and equipment involving; hydraulic power units (HPUs), variable frequency dives (VFDs),.

Tyrrells hand cooked potato crisps).We’re looking for a Production Operative to join us at KP Snacks.If you’re ready to bring your ideas to the table, grow your skills and be part of a team that values what makes you, you – this could be your next big move.As a Production Operative, you’ll p

Up to £31,840 + Bonus + Excellent Benefits.Warehouse Operative with a VNA F1 License.We pride ourselves in putting our people and customers at the heart of everything we do – and best of all, provide opportunities to develop skills and build careers through our award-winning Wolseley Talent Guild

With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best.

Initial 3-month contract with potential extension.Hybrid working – minimum 3 days per week onsite in Romsey.Opportunity to support cutting-edge defence technology projects within a highly innovative engineering environment.Our client is an advanced engineering and technology organisation deliverin

Principal Thermal Mechanical Engineer.Cowes, Portsmouth Broad Oak, Great Baddow, 3 days a week onsite.We offer a range of flexible working arrangements – please speak to your recruiter about the options for this particular role.Up to £77,100 (dependent on skills and experience) Part time & accrui

We are seeking a Mechanical Design Engineer to support existing product lifecycle management and new product introduction (NPI) projects.The role involves delivering robust, manufacturable designs across low to high-volume production while contributing to continuous improvement and cross-functional

Mechanical Engineer – Product Assurance.We offer a range of hybrid and flexible working arrangements – please.Circa £55,000 depending on experience.Join BAE Systems and you’ll be part of something bigger.As a valued member of our global colleague network, you’ll bring your unique skills and

A growing engineering and manufacturing business is looking to recruit a Design Engineer to join its technical team.This is an excellent opportunity for someone looking to develop a long-term career within mechanical design and engineering, working on a variety of bespoke equipment and fabricated pr

We are looking for an experienced Plant Operator to join our growing team on a full-time basis. MRD Plant Ltd, headquartered in Leicestershire, provides comprehensive services to the recycling, construction, quarrying, and mining sectors across the UK. These services include operated and self-drive

Are you an experienced Mechanical Design Engineer looking for a new opportunity? Do you have a strong background in sheet metal fabrication, automation machinery, and SolidWorks design? If so, this could be the perfect role for you.Our client, a growing engineering and manufacturing company, is seek

Senior Mechanical Design Engineer.Remote – UK, Ireland, or Italy).We have partnered with a leading special purpose machinery client who are looking for an experienced Mechanical Design Engineer.Candidates should be based in the UK, Ireland, or Italy and fluent in English.You will lead the design o

Principal Mechanical Design Engineer.Advanced Engineering & Clean‑Tech Machinery.Are you an experienced Mechanical Design Engineer looking to take the lead on complex, cutting‑edge engineering projects?.We’re supporting a pioneering engineering organisation developing.Principal Mechanical Desi

Do you enjoy creating and improving designs using 3D CAD?.Looking for a role where you can develop your technical skills in a supportive team?.Ready to work on a variety of practical, real-world engineering projects?.Our client, a growing and forward-thinking engineering organisation, is looking to

Job Title: Senior Structural and Mechanical Systems Engineer.Job Profile – Senior Structural and Mechanical Systems Engineer.Our client is the world leader in the development of complex systems utilised in mission critical environments.Candidates will have the opportunity to work in an advanced ma

Here at c2c we take pride in being an award-winning train operator running services between Fenchurch Street and Shoeburyness, serving 26 stations in East London and South Essex.Our customers never stand still and neither do we.We anticipate, innovate and flex around our customer’s needs and it ta

Engineering Manager (Mechanical) – Step Up from Lead Engineer.Bedfordshire (Hybrid/Flexible Working, 2-3 Days Office).Lead Mechanical Engineer ready to step into Engineering Management.Engineering Manager position from day one.They’re looking for a technically strong leader who can.Leading and d

Job Title - Senior Mechanical Design Engineer.Duration - 3 Month Contract (potential for extension).Working Model - Fully remote or onsite in Bridgend, Wales.Hourly Rate - Circa £40p/hour (Outside IR35).Senior Design Engineer Overview.My client is seeking an experienced.Senior Mechanical Design Eng

BMS Maintenance Engineer (Trend / Tridium) Oxford £55,000-£60,000 + Company Vehicle + Progression + Overtime + Company Benefits Are you a BMS Maintenance Engineer from a Trend / Tridium background looking for an autonomous role covering a regional patch where you will be the-go to person working o

Operations & Maintenance Engineer Salary: £44,720 (rising to £49,920 after successfully obtaining SAP under company safety rules) Location: Oxford Our client is seeking an experienced and safety-focused O&M Engineer to join its growing operations team.The successful candidate will be respo

Maintenance Plumbing and Heating Engineer (Local Patch) Oxfordshire.Overtime + Company Van + Pension + Progression.Are you a Maintenance Engineer from a plumbing or heating background holding an NVQ in Plumbing, along with being GasSafe registered looking for the exciting opportunity to join a busin

Electrical & Mechanical Maintenance Engineers FMCG Food Manufacturing Day Shifts NO SPONSORSHIPS What you get Enhanced holiday allowance Free on-site parking Subsidised canteen Pension scheme + life assurance cover Discounted staff shop Phone and car insurance perks Free health surveillance Traini

Electrical Engineer - FMCG / Food Manufacturing Were looking for a skilled and proactive Electrical Engineer to join our dynamic team within a fast-paced Food/FMCG manufacturing environment.If you thrive on solving problems, improving systems, and keeping production running smoothly, this role is fo

Join Us in Changing Lives At OXB , our people are at the heart of everything we do.Were on a mission to enable life-changing therapies to reach patients around the worldand were looking for passionate individuals who embody our core values every day: Responsible, Responsive, Resilient, and Respectfu

Position: Mechanical Design Engineer Location: Witney, Oxfordshire Salary: £30,000 - £45,000 Mechanical Design Engineer required.Our client is a well-establised manufacturer of electrical & mechanical systems based in the Carterton, Oxfordshire area.Due to ongoing success they are seeking an enthu

Theyre looking for a hands-on Reactive Maintenance Engineer to support plant reliability and keep operations running smooth.