Power systems engineer jobs in BradfordCreate job alerts

At Modine, we are Engineering a Cleaner, Healthier World™. Building on more than 100 years of excellence in thermal management, we provide trusted systems and solutions that improve air quality and conserve natural resources. Our Airedale by Modine brand is a world leader in the design and manufacture of innovative thermal management solutions for data centers, clean rooms, hospitals, universities, and other mission-critical environments. Trusted as The Critical Cooling Specialists, Airedale by Modine has decades of experience providing efficient, flexible end-to-end cooling solutions that work smarter, not harder, to deliver more cooling for less power. With manufacturing facilities in Canada, Spain, the UK, and the U.S., we’re scaling up across the world to support an ever-growing demand for our solutions. That’s where you come in…. The Opportunity The Manufacturing Engineer is responsible for helping to drive operational excellence and across production processes. This role has a strong focus on continuous improvement methodologies such as Lean and the theory of constraints to optimise manufacturing performance, reduce waste, enhance product quality, and support strategic business objectives. The role also plays a key part in supporting the introduction and implementation of new capital expenditure (CapEx) projects to enhance production capability. Role Requirements • Identify and evaluate improvement opportunities using proven CI tools (Kaizen, Value Stream Mapping, 5S, SMED, Root Cause analysis)., • Lead and support CI projects that reduce cost, eliminate waste, shorten cycle time, and improve product quality., • Implement continuous improvement methodologies to build operational capability., • Drive defect prevention through robust process controls and error-proofing solutions (Poka‑Yoke)., • Support new product development from concept through to product launch., • Develop, optimise, and validate manufacturing processes to meet rigorous quality and performance targets., • Monitor operational performance (OEE, yield, downtime, scrap, OTIF) and present insights to relevant stakeholders., • Create dashboards, databases, KPIs, and reports to support decision‑making and justification., • Support issue resolution through structured problem‑solving and collaboration with cross‑functional teams. Skills & Experience • HNC / HND or Degree in Mechanical, Manufacturing, Industrial Engineering (or related field preferred)., • Experience in high‑volume manufacturing environment, (automotive industry or similar preferred), • Demonstrated experience delivering tangible CI improvements., • Experience in 5S, SMED, TPM, 8 wastes or other Lean methodologies., • Strong experience in a manufacturing or production engineering role., • Proficient in process mapping, workflow analysis and factory floor observations., • Excellent problem‑solving and analytical skills., • Strong communication and stakeholder engagement abilities., • Proactive and self‑driven with a continuous improvement mindset., • Strong attention to detail and commitment to implementing solutions., • Comfortable managing multiple projects simultaneously in a fast‑paced environment. What can you expect from us? • Competitive Salary, • 7% Employer Pension contribution (min 1% employee), • Life assurance, • 25 days holiday + statutory days, • Holiday Purchase scheme, • Employee Assistance Programme, • Airedale Rewards scheme – discounts on shopping/restaurants/cinema etc., • Exciting opportunity to work in a hypergrowth market, with a market leading product and an internationally recognised brand

At Modine, we are Engineering a Cleaner, Healthier World™. Building on more than 100 years of excellence in thermal management, we provide trusted systems and solutions that improve air quality and conserve natural resources. Our Airedale by Modine brand is a world leader in the design and manufacture of innovative thermal management solutions for data centers, clean rooms, hospitals, universities, and other mission-critical environments. Trusted as The Critical Cooling Specialists, Airedale by Modine has decades of experience providing efficient, flexible end-to-end cooling solutions that work smarter, not harder, to deliver more cooling for less power. With manufacturing facilities in Canada, Spain, the UK, and the U.S., we’re scaling up across the world to support an ever-growing demand for our solutions. That’s where you come in…. The Opportunity Due to continued expansion and company growth an excellent opportunity has arisen for a Senior Electrical Design Engineer to work as part of the Research & Development Department based in Leeds reporting to the Principal Electrical Engineer. It involves working closely with a team of mechanical, controls, manufacturing and quality engineers to design and develop new standard HVAC products whilst maintaining the existing product portfolio. The role consists of working with the Product Development teams to develop new electrical product designs in accordance with APQP (Advanced Product Quality Planning) and relevant SOM guidelines from concept through to full product launch. You will aid the Principal Electrical Engineer & Lead Mechanical Engineers where necessary and as a team will be responsible for creating design briefs for companywide approval, hitting cost targets, designing electrical infrastructure of products with customer, manufacturing and assembly in mind to allow labour targets, project timescales, technical features, training and all critical deliverables to be met. You will be required to work closely with the Product Development Controls team to bring the electrical and controls design to fruition and support changes to the current portfolio. Role Requirements: • Responsible for improving the electrical aspects of product innovation and customer focus of Airedale by Modine standard products., • Assist in formulating unit electrical design and controls operation briefs for approval., • Ensure electrical aspects of new components are properly tested prior to introduction., • Oversee electrical build, wiring best practice, test and approval of prototypes., • To ensure appropriate standards and approvals and testing is carried out (i.e. EMC testing)., • To conduct product introduction support and training., • To ensure the appropriate design modifications are released informing all concerned of engineering changes., • Carry out electrical design on a range of HVAC systems, for both new and existing ranges, ensuring safe operation and compliance with relevant legislation., • Selection/sizing of appropriate electrical components, motors, cabling etc. using engineering design calculations and best practice., • Communicate internally at all levels to provide technical advice or suggestions for improvement to design., • Communicate with internal customers to provide product technical advice/support, • Attend site meetings and trade shows where required., • Build standard electrical CAD drawing generators, symbol libraries and circuits using AutoCAD software., • Produce accurate parts lists., • Design control panel layouts., • Design terminal lists and layouts., • Assist & liaise with mechanical and controls engineers. Required Qualifications & Experience • Hold a technical degree and have 5+ years experience with electrical design, preferably within the HVAC or Machine design sector, although all experience will be considered., • Must be able to innovate and be able to support ideas through to implementation., • Knowledge of UKCA and CE marking process., • Knowledge/understanding of PLC controllers., • Experience with both 3 phase power circuits & low voltage control circuits., • Experience with HVAC application and knowledge of cooling and heating systems (Not essential)., • Ability to source appropriate components., • Knowledge and awareness of current legislation affecting electrical design and testing., • Ability to work pro-actively, using own initiative., • Be able to produce high quality accurate information with good attention to detail., • Ability to work to deadlines., • Strong team working skills., • Have good written & communication skills. Experience of the following software would be advantageous • Electrical CAD Software (i.e. Promis-e / AutoCAD Electrical), • AutoCAD (2D Modelling), • Solid Edge (3D Modelling), • Microsoft Word, Excel, Outlook In Return we Offer • Competitive Salary, • Employer Contributory pension of 7% and Employee 1%, • 25 days holiday plus bank holidays and the opportunity to purchase a further 3 days through salary sacrifice scheme., • Airedale rewards discounts on shopping vouchers and days out.

1822/1823/1824CW Below covers everything you need to know about what this opportunity entails, as well as what is expected from applicants. Location: Derby / Stafford / Grangemouth Join Our Team as a Senior System Integration Engineer – Lead the Future of Infrastructure Innovation! Are you passionate about integrating cutting-edge control systems and driving technological advancements in vital infrastructure projects? We are seeking a skilled Senior System Integration Engineer to join our dynamic team, overseeing the design, development, testing, and commissioning of complex control solutions across water, power, and industrial sectors. This pivotal role offers an exciting opportunity to influence major infrastructure projects, enhance system reliability, and work with industry-leading technologies. Key Skills & Qualifications: • Extensive experience with Siemens (and ideally Rockwell) hardware and software systems, • Strong background in Water and Wastewater treatment sectors, • Proven track record managing complex control system integration projects, • Skilled in interpreting client standards and user requirements, • Ability to reverse engineer existing control software with precision, • Excellent communication, time management, and project coordination capabilities, • Commercial awareness and a proactive problem-solving mindset, • Experience with SCADA and HMI development, • Knowledge of programming standards and cybersecurity for control systems, • Degree in Electrical, Controls, or Mechanical Engineering or related field, • Flexibility to travel as needed to project sites across the UK

1825 / 1826CW Any additional information you require for this job can be found in the below text Make sure to read thoroughly, then apply. Derby / Grangemouth Join Our Team as a System Integration Engineer Are you passionate about delivering innovative control system solutions and eager to work on impactful infrastructure projects? As a System Integration Engineer, you will play a critical role in designing, developing, testing, and commissioning control systems that support vital industries such as Water & Wastewater, Power & Energy, and more. This is an exciting opportunity to be part of a leading UK-based multidisciplinary contractor, supporting your growth while making a real difference in infrastructure services. Required Skills: • Hands-on experience with Rockwell, Mitsubishi, or Schneider control systems, • Strong background in Water & Wastewater treatment projects, • Proficiency in interpreting client standards and user requirements, • Excellent communication skills and solid project management abilities, • Practical, commercially aware approach to engineering solutions, • Industry-recognized training or qualifications in control systems engineering, • Willingness to undertake site visits across the UK

Astute's Power team is partnering with a leading power protection solutions provider, known for its commitment to technical excellence and professional development, to recruit a Field Service Engineer to cover the North West of England. This strategically important Field Service Engineer role comes with a competitive salary of up £50,000, overtime, company vehicle, private healthcare, pension, and excellent holiday entitlement. If you're a Field Service Engineer looking to work for an organisation that puts integrity, customer satisfaction, and people at the forefront of everything it does, then submit your CV to apply today. Responsibilities and duties of the Senior UPS Field Service Engineer role Reporting to the Technical Manager, you will: • Start up, maintain, and carry out emergency repairs on Start up, maintain, and carry out emergency repairs on, Batteries, Power distribution equipment, and Site monitoring systems, • Diagnose and repair faults using clients' technical drawings when necessary, • Provide technical recommendations to clients and colleagues, • Produce and follow site-specific risk assessments and method statements., • Ensure continuous communication with the service direction team, • Accurately complete all company and customer paperwork and administration. We are looking for someone with the following: • Previous field service experience in UPS, switchgear, IPS, SCADA, or related power/electrical sectors., • Qualified Electrician/Electrical Engineer (Level 3/4 or above - HNC, HND, NVQ preferred)., • Strong technical knowledge and problem-solving skills in electrical/electronic engineering., • Competence with electrical measuring equipment and tools., • Full, clean UK driving licence. Considering applying for this job Do not delay, scroll down and make your application as soon as possible to avoid missing out. Personal skills The Field Service Engineer role would suit someone who is: • Highly customer-focused, with strong communication skills., • Commercially aware and able to recognise opportunities., • Willing to travel and stay away from home (typically one week per month)., • Honest, reliable, and able to work with integrity., • Competitive base salary + overtime, • Fully expensed hybrid company car or van, • Private pension scheme with generous company contribution., • Private healthcare scheme., • Discretionary bonus (linked to performance)., • 23 days' holiday + bank holidays + Christmas shutdown, • Full training on the latest UPS technology., • On-call and working-away allowances. Astute People are acting as an employment agency in relation to this vacancy. We do not discriminate on the grounds of age, race, gender, disability, creed or sexual orientation and comply with all relevant UK legislation. We encourage applications from individuals from all backgrounds but candidates must be able to demonstrate their ability to work in the UK. Astute is also committed to the government's Disability Confident Employer initiative. xrnqpay We endeavour to get back to everyone, however, if you have not heard anything after 7 days, please consider your application unsuccessful.

Tendering Engineer 33kV / 66kV / 132kV Major Projects ?? Wakefield (Hybrid Available) Want to make an application Make sure your CV is up to date, then read the following job specs carefully before applying. ?? Competitive Salary + Car Allowance + Benefits ? Power & Utilities | BESS | Substations | Solar | NEC Contracts An established power and utilities contractor is looking to appoint an experienced Tendering Engineer to support the delivery of high-value 33kV, 66kV and 132kV infrastructure projects. This role sits within a growing major projects division delivering Battery Energy Storage Systems (BESS), substations, solar and private network schemes ranging from £2m to £40m in value. 33kV projects form a core part of the business, with full turnkey packages including design and civils. This is an excellent opportunity for a commercially aware power professional who understands high-voltage infrastructure and thrives in complex, competitive tender environments. The Role As Tendering Engineer, you will lead and coordinate technical and commercial tender submissions across major power infrastructure projects. Responsibilities will include: * Reviewing and analysing complex tender documentation * Leading 33kV, 66kV and 132kV bid submissions * Coordinating technical, engineering and commercial inputs * Building robust and competitive cost estimates * Managing risk and compliance within NEC contract frameworks * Working closely with design, civils and delivery teams * Supporting value engineering and technical clarifications * Managing multiple deadlines within fast-paced tender cycles You will play a key role in shaping major project wins across BESS, substations and solar schemes. What Were Looking For * Proven experience tendering HV power infrastructure projects (33kV / 66kV / 132kV) * Background within utilities, DNO, ICP or private networks environments * Experience pricing or coordinating BESS, substations or solar projects * Strong understanding of NEC contracts * Ability to manage technical and commercial bid elements We are open to candidates from a range of backgrounds, including: * Tendering Engineers * Estimators within HV power * Engineers who have moved into estimating or pre-construction * Hands-on HV engineers looking to transition further into commercial/tendering * Hybrid working is available, with office presence required in Wakefield. xrnqpay Whats On Offer * Competitive salary * Car allowance * Pension * 25 days holiday * Long-term major project pipeline * Exposure to high-value (£2m£40m) energy infrastructure schemes If you are an experienced Tendering Engineer looking to work on technically challenging 33kV132kV projects across BESS, substations and solar infrastructure, apply now for a confidential discussion.

Electronics Design Engineer (Analogue, Power Electronics, SMPS) The following information provides an overview of the skills, qualities, and qualifications needed for this role. Normanton, West Yorkshire, United Kingdom | Full-Time, Permanent | About the Role We are seeking a highly skilled Principal Electronics Design Engineer to join a growing engineering team in Normanton, West Yorkshire. This is an exciting opportunity for an experienced Electronics Design Engineer with expertise in analogue electronics, power systems, and switch-mode power supplies (SMPS), to play a leading role in delivering innovative electronic solutions. Reporting to the Normanton Site Technical Lead, you will provide technical leadership, mentor engineers, and drive the development of advanced systems across power electronics, LED lighting, and embedded control technologies. Key Responsibilities • Lead the design and development of analogue electronics, power systems, and SMPS (buck, boost, flyback), • Design and optimise LED lighting control systems and power management solutions, • Provide technical leadership and mentorship to a team of electronics engineers, • Oversee integration of control systems, HMI, and embedded electronics into products, • Collaborate with cross-functional teams across hardware, software, and systems engineering, • Troubleshoot complex issues related to power conversion, EMC, and thermal performance, • Ensure designs meet regulatory standards, safety requirements, and customer specifications, • Create and review technical documentation including schematics, PCB layouts, and test procedures, • Drive continuous improvement and engineering best practices, • Extensive experience in analogue electronics and power electronics design, • Strong expertise in switch-mode power supplies (SMPS) and power conversion circuits, • Broad knowledge of electronic circuit design and system-level integration, • Experience leading and mentoring engineering teams, • Proficiency with design and simulation tools such as SPICE, MATLAB, Altium Designer xrnqpay, • Solid understanding of EMC compliance, thermal management, and safety standards, • Strong hands-on problem-solving and troubleshooting skills, • Experience with LED lighting systems and control electronics, • Knowledge of embedded systems and mixed-signal design, • Exposure to HMI (Human Machine Interface) development

Electrical Maintenance Supervisor Salary: Negotiable + 25 days holiday + pension + Life assurance x4 salary Location: Yeadon / Otley (easily commutable from Bradford, Leeds, Harrogate) Hours: Monday to Friday – 7.30am – 4pm The Job: • Manage a team of shift and days based electrical technicians, • Mix of preventative and reactive maintenance on a large manufacturing site, • A mixture of old and new equipment and machinery across a large site, • AC DC motors and drives, some PLCs but not many, • Pumps, mixing vessels, boilers and boiler house equipment, compressors, gas booster systems, hydraulics, pneumatics, overhead cranes and lift systems. They have service contracts for more complex issues. The Person: • Ability to lead a team with a positive & engaging personality, good attitude and team player essential., • Skills in industrial electrical maintenance engineering., • Controls and instrumentation knowledge a bonus but not essential. The Company: • Very well established with a global customer base manufacturing sustainable and in demand products. There is a professional yet informal and relaxed feel to the plant., • Team and company are very friendly and work as a team. There will be opportunities to improve and learn new skills, get involved in projects and progress if you wanted to. To apply send CV to Tim Fawcett at Control Recruitment Solutions or contact us via the office number. Key; electrical supervisor, E&I supervisor , EC&I supervisor, electrical maintenance engineer, electrical engineer; project engineer; industrial electrician; controls engineer; controls and automation engineer; EC&I technician;; instrumentation engineer; EC&I engineer; area engineer; section engineer; P&IDs, electrical engineer; scada; maintenance engineering; steam, comah; boiler; pressure; plant; pssr; electrical engineering; electrical maintenance engineer; tissue, paper, paper mill; hrsg; PLC, dcs; commissioning; superheated steam; steam generator; Manufacturing; propulsion; power; chemical; navy; marine; pressure vessels; tanks; heat exchangers; marine engineer; Plant Engineering; Marine Engineering; hydraulics; combustion engineering; renewable, biomass; CHP; combined heat and power; high pressure steam; steam rising; reliability; materials handling; solids handling; process machinery; aluminium; food; pharmaceutical; plastics; chemicals; feeds; mixers; hoppers; silos; tanks; heat exchangers; pressure vessels

Mechanical Maintenance Technician Salary: £negotiable + 34 days holiday + 8% pension + Life assurance x4 annual salary Location: Yeadon / Otley (easily commutable from Bradford, Leeds, Harrogate) Hours: Monday to Friday – Days 7am – 4pm The Job: * 70-80% preventative maintenance and 20-30% reactive. * Good prospects for training and gaining experience from experienced supervisors and managers. * Prospects to be involved in future modernisation projects * A mixture of old and new equipment and machinery across a large site * Pumps, gearboxes, agitators, mixing vessels, boilers and boiler house equipment, compressors, fans, gas booster systems, hydraulics, pneumatics, overhead cranes and lift systems. * Installation of new rotating equipment including accurate alignment. * Working with apprentices as well as very experienced maintenance and production staff. * Thorough training and onboarding The Person: * Ideally 5 years + maintenance experience gained in an industrial or manufacturing setting * Project experience may be an advantage for potential future investment and modernisation projects * Background in any of the following would be useful; heavier engineering process plants, chemical, steel, metals, glass, recycling, CHP, energy, gas, paper. Ultimately most backgrounds / applicants considered. Desirable Skills / Not Essential: * Machining on lathes, milling machine, pillar drill etc. * Welding and basic fabrication. * Compex or Atex awareness or certificates would be an advantage but not essential. The Company: * The company is very well established with a global customer base manufacturing sustainable and in demand products. * The team and company are very friendly and work as a team. * A professional yet informal and relaxed feel to the plant. There will be opportunities to improve and learn new skills, get involved in projects and progress if you wanted to. * Low staff turnover and £ several million invested recently. To apply send CV to Tim Fawcett at Control Recruitment Solutions or contact us via the office number. Key; mechanical technician, mechanical maintenance engineer, mechanical engineer; project engineer; area engineer; section engineer; scada; maintenance engineering; steam, comah; boiler; pressure; plant; pssr; electrical engineering; electrical maintenance engineer; tissue, paper, paper mill; hrsg; PLC, dcs; commissioning; superheated steam; steam generator; Manufacturing; propulsion; power; chemical; navy; marine; pressure vessels; tanks; heat exchangers; marine engineer; Plant Engineering; Marine Engineering; pneumatics; hydraulics; combustion engineering; rollers, renewable, biomass; CHP; combined heat and power; high pressure steam; steam rising; reliability; materials handling; solids handling; process machinery; aluminium; food; pharmaceutical; plastics; chemicals; feeds; mixers; hoppers; silos; tanks; heat exchangers; pressure vessels

Company description: Water Utility Company based in Yorkshire region of England. Job description: Lead Design Engineer (Electrical, Instrumentation, Control & Automation) Hello! Thanks for stopping by. Let us tell you about all the great reasons to join us here at Yorkshire Water: We offer a competitive salary, depending on experience from £48,249 to £60,314. Annual incentive related bonus (£1000 maximum bonus opportunity for the performance year). Attractive pension scheme (up to 12% company contribution). Development opportunities in line with the Lead Design Engineer progression plan. 25 days annual leave plus bank holidays plus an extra wellness day! Life assurance cover of 4 times pensionable salary. A great benefits package choose from health cash plan scheme, critical illness insurance, dental insurance, life assurance flex and partner cover. Retail savings scheme. Online GP service, cycle to work scheme, gym membership discounts and many more! Location : This role will initially be based in Bradford but were moving our office to Leeds Valley Park in Summer 2026, so youll be based there in the future (hybrid working minimum 1 day per week in the office). Work type: Permanent. 37 hours per week, Monday Friday. What we do! Everyone has an idea of what a water company does. Here in Yorkshire, we make sure that over 5.4 million people living in the region and the millions of people who visit our region each year, can rely on our services, and have clean and safe drinking water on tap and that their wastewater is taken away. But for us, its so much more than this. We look after communities, protect the environment, and plan to look after Yorkshires water, today, tomorrow 24/7, 365 days a year. We provide essential water and wastewater services to every corner of the Yorkshire region, and play a key role in the regions health, wellbeing, and prosperity. New environmental legislation, unprecedented levels of investment and changing expectations from customers means that this is an exciting time to discover opportunities within the water industry. Our Engineering Design team are a key part of how we plan to meet the changing expectations of customers and regulators. This role is a fantastic opportunity for someone who is passionate about engineering excellence, thrives in a collaborative multi disciplinary environment, and wants to play a central part in shaping the future of water infrastructure. Our Engineering Design Team sits at the heart of our capital programme. We lead the technical definition, governance and design of projects across water, wastewater, bioresources, nature based solutions, networks, treatment and beyond. We are building a Design Authority and Engineering centre of excellence that will set the standard for how Yorkshire Water designs and delivers infrastructure. Where you fit in! As our Lead Design Engineer (EICA) you will have a: Minimum 5 years EICA design experience, demonstrating strong technical capability. Expertise in wastewater and clean water infrastructure and associated systems. Work across multidisciplinary design projects, collaborating with Strategic Planning Partners, Design Partners and Delivery Partners. Provide technical oversight to ensure high-quality EICA design delivery throughout the full project lifecycle. Deliver proficient and efficient engineering design support to ensure schemes and programmes comply with Yorkshire Water Engineering Specification, relevant design guidance, current legislation and applicable British and European standards. Ensure designs are completed to the required quality, safety, and regulatory standards. Report directly to the Senior EICA Engineer. What skills and qualifications you will need: Deliver high-quality EICA engineering design across water, wastewater, bioresources and storm-overflow programmes as part of a multidisciplinary project team. Review and assure design documentation from Strategic Planning, Design and Delivery Partners, ensuring consistency, technical accuracy and alignment with project requirements. Develop technically robust, innovative and cost-effective design solutions in line with TOTEX and whole-life-cycle principles (cost and carbon). Apply strong technical expertise in LV design, cable calculations, protection studies, instrumentation, PLCs, HMIs, telemetry, automation networks and preparation of User Requirement Specifications (URS). Support design governance processes including value engineering, constructability reviews, HAZOP/HAZCON workshops and adherence to Yorkshire Water engineering specifications and BS 7671. Work closely with suppliers, planning and procurement teams to enhance Standard Designs and increase Design for Manufacture and Assembly (DfMA) adoption. Champion high standards of safety, sustainability and risk management, ensuring all designs comply with relevant legislation, British/European Standards and internal safety policies. Provide leadership, mentoring and technical guidance to junior engineers and graduates, promoting knowledge sharing and team development. Manage multiple workstreams and deliverables to agreed deadlines, maintaining strong attention to detail and effective document control throughout the design process. Communicate complex technical concepts clearly to a range of stakeholders, influencing decision-making and supporting cross-functional collaboration. Full valid driving license with less than 6 points. You will also benefit from having: Experience or working understanding of High Voltage systems, including liaising with DNOs (e.g., Northern PowerGrid) for power upgrades, new connections and site supply agreements. Skilled in implementing Functional Safety systems and contributing to or chairing HAZOPs and other safety related design reviews. Competent in Autodesk or equivalent design software, with experience producing Pipework & Instrumentation Diagrams (P&IDs). Commercial awareness within project delivery, including project planning, working with Gantt charts and supporting project management activities. Although we operate 24 hours a day, 365 days a year, its important to us that we support flexible working patterns and job share options (when we can), to help you make the best of both your work and home life. We know that juggling childcare responsibilities or getting that ideal work/life balance isnt always easy! Do we sound like your cup of tea? If youve got experience as a Lead Design Engineer EICA and want to help us deliver great service for our customers whilst looking after the environment, then be sure to apply today to find out what a career with Yorkshire Water can offer you. Please apply online and complete the application process by uploading an up-to-date copy of your CV and cover letter outlining your relevant experience for the role. If successful for the role, you will be required to undergo pre-employment checks that will include a Basic Disclosure Check, carried out through a Third-Party Company, prior to commencing employment. Depending on the role, you may also be required to go through the security vetting process for either a Counter Terrorist Check or Security Check clearance. All our roles are subject to a medical questionnaire, and further medicals when required. We are committed to removing barriers and ensuring our recruitment process is accessible to everyone. We offer a range of adjustments to make your application experience as comfortable and straightforward as possible. If you have an accessibility need, disability, or condition that requires changes to the recruitment process, please include this information in your application. We will then discuss any reasonable adjustments required. Kelda Group reserve the right to close this position before the published closing date, should the need occur. We therefore advise that you complete and submit your application as soon as possible. Closing date for this role is 29th March 2026. No agencies please. TPBN1_UKTJ

Futures are working with a leading organisation within the power distribution sector to recruit an experienced Quality Engineer. This is a key position focused on driving quality improvements, supporting customer satisfaction, and ensuring robust corrective actions across manufacturing and operational processes. As a Quality Engineer, you will act as the primary interface between internal teams and customers on all quality-related matters. You will take ownership of investigating issues, identifying root causes, and implementing effective corrective and preventive actions to drive continuous improvement. Key Responsibilities Act as the main point of contact for customer quality concerns, ensuring timely and professional resolution Lead root cause analysis activities using structured methodologies Develop, implement, and verify corrective and preventive actions (CAPA) to prevent recurrence Work cross-functionally with engineering, production, and supply chain teams to resolve quality issues Support customer audits and participate in internal quality audits Analyse quality data and trends to identify improvement opportunities Ensure compliance with relevant industry standards and quality management systems Drive continuous improvement initiatives across processes and products The Ideal Candidate Proven experience as a Quality Engineer within power distribution or a closely related sector Strong track record of working directly with customers to resolve technical or quality issues Demonstrated experience in root cause analysis and implementing corrective actions Familiarity with quality tools and methodologies (e.g. 8D, FMEA, Six Sigma principles) Experience working within ISO 9001 or similar quality management systems Excellent problem-solving and analytical skills Strong communication skills with the ability to engage stakeholders at all levels Ability to manage multiple priorities in a fast-paced environment

Mechanical Maintenance Technician Salary: £negotiable + 34 days holiday + 8% pension + Life assurance x4 annual salary Location: Yeadon / Otley (easily commutable from Bradford, Leeds, Harrogate) Hours: Monday to Friday – Days 7am – 4pm The Job: • 70-80% preventative maintenance and 20-30% reactive., • Good prospects for training and gaining experience from experienced supervisors and managers., • Prospects to be involved in future modernisation projects, • A mixture of old and new equipment and machinery across a large site, • Pumps, gearboxes, agitators, mixing vessels, boilers and boiler house equipment, compressors, fans, gas booster systems, hydraulics, pneumatics, overhead cranes and lift systems., • Installation of new rotating equipment including accurate alignment., • Working with apprentices as well as very experienced maintenance and production staff., • Thorough training and onboarding The Person: • Ideally 5 years + maintenance experience gained in an industrial or manufacturing setting, • Project experience may be an advantage for potential future investment and modernisation projects, • Background in any of the following would be useful; process plants, chemical, steel, metals, glass, breweries, recycling, CHP, energy, gas, paper. Ultimately most backgrounds / applicants considered. Desirable Skills / Not Essential: • Machining on lathes, milling machine, pillar drill etc., • Welding and basic fabrication., • Compex or Atex awareness or certificates would be an advantage but not essential. The Company: • The company is very well established with a global customer base manufacturing sustainable and in demand products., • The team and company are very friendly and work as a team., • A professional yet informal and relaxed feel to the plant. There will be opportunities to improve and learn new skills, get involved in projects and progress if you wanted to., • Low staff turnover and £ several million invested recently. To apply send CV to Tim Fawcett at Control Recruitment Solutions or contact us via the office number. Key; mechanical technician, mechanical maintenance engineer, mechanical engineer; project engineer; area engineer; section engineer; scada; maintenance engineering; steam, comah; boiler; pressure; plant; pssr; electrical engineering; electrical maintenance engineer; tissue, paper, paper mill; hrsg; PLC, dcs; commissioning; superheated steam; steam generator; Manufacturing; propulsion; power; chemical; navy; marine; pressure vessels; tanks; heat exchangers; marine engineer; Plant Engineering; Marine Engineering; pneumatics; hydraulics; combustion engineering; rollers, renewable, biomass; CHP; combined heat and power; high pressure steam; steam rising; reliability; materials handling; solids handling; process machinery; aluminium; food; pharmaceutical; plastics; chemicals; feeds; mixers; hoppers; silos; tanks; heat exchangers; pressure vessels