Quality control inspection jobs in ReadingCreate job alerts

EC&I Inspector Location: Reading, Berkshire Contract: 12-month contract Rate: £45.00 per hour Working Pattern: Site-based, Monday to Friday Security Clearance: Valid SC clearance or eligibility to obtain The Opportunity We are looking for an experienced Electrical, Control & Instrumentation (EC&I) Inspector to join a major programme in Reading on an initial 12-month contract. This is a site-based opportunity within a highly regulated nuclear and defence environment. You will be responsible for inspecting EC&I installations, witnessing testing activities and ensuring all work complies with engineering specifications, relevant industry standards and quality requirements. The role would suit an experienced EC&I Inspector with a strong electrical inspection and testing background who is comfortable working within a safety-critical, quality-focused environment. • Inspect electrical, control and instrumentation installations against engineering drawings, specifications and applicable standards., • Witness and document electrical testing activities, including continuity, insulation resistance, functional and loop testing., • Review Inspection and Test Plans (ITPs) and ensure requirements are followed throughout construction and commissioning activities., • Identify quality issues and raise and manage Non-Conformance Reports (NCRs), ensuring defects are appropriately addressed., • Compile and maintain inspection documentation, quality records and lifetime records packages., • Work closely with engineering, construction and commissioning teams, as well as clients and subcontractors, to resolve quality and technical issues., • Ensure work complies with 18th Edition IET Wiring Regulations (BS 7671) alongside relevant site safety, quality and security requirements., • Support New Product Introduction (NPI) and associated inspection activities where required., • A minimum of five years' EC&I inspection experience gained within nuclear, defence, oil & gas, marine or another heavy industrial environment., • City & Guilds Initial and Periodic Electrical Inspection and Testing (BS 2391) qualification., • 18th Edition IET Wiring Regulations (BS 7671) certification., • ATEX qualifications Ex01-Ex04 (gas) and Ex05-Ex06 (dust)., • Strong knowledge of EC&I systems, electrical inspection, loop testing, calibration and quality assurance., • Experience maintaining inspection and quality records., • Experience working within an ISO 9001 or equivalent quality management environment., • Valid SC clearance, or eligibility and willingness to obtain the required security clearance before commencement. The NRL Group connect global companies with the right people to bring engineering projects to life. Supporting contracting companies with energy transition plans and working with our clients to create a cleaner, greener future. We welcome applications from every walk of life and are committed to diversity within the industries we support, as a certified Inclusive Recruiter and Armed Forces friendly employer. You can ensure you stay safe when job searching online by visiting the JobsAware website. #J-18808-Ljbffr

YLEM Power is the Group’s specialist operations and maintenance business, providing technical, engineering and asset support services to owners and operators of distributed energy infrastructure across the UK. The business brings together experienced field engineers, technical specialists, account managers and remote monitoring capabilities to help customers maximise plant availability, operational efficiency and asset life. Its services include planned and reactive maintenance, engine servicing, fault diagnosis, performance optimisation, remote monitoring, compliance support and long-term asset management. YLEM Power supports a range of energy technologies and operational environments, including flexible generation, combined heat and power, landfill gas, battery energy storage and other decentralised energy assets. Employees within YLEM Power work in a technically focused, service-led environment where safety, reliability, responsiveness and customer performance are central to the business. The Electrical O&M Engineer is key to the delivery of safe, efficient, and commercially successful operations, maintenance, and comprehensive operational support across the Company's expanding portfolio of nationwide Power Generation assets and customer facilities. The role ensures that all planned and reactive maintenance, technical fault response, critical repairs, and core operational activities are performed safely, on time, within agreed commercial parameters, and to precise customer requirements. The ideal will deliver engineering service excellence using a proactive strategy to target & identify the root causes of faults (both known or potential) and implement structural, efficient methods of remediation. Location - Nationwide but would prefer candidates to be located around the Midlands/ South area of England • Utilisation, compliance and improvement of the company’s operations and maintenance procedures, manuals, record keeping and stock control systems., • Day to day operations and maintenance including (but not limited to); complex fault diagnosis, service, modification, replacement, and rectification across all generation assets and auxiliary equipment., • Interrogate and decipher control program logic, software sequence shortfalls, or telemetry signal faults to resolve plant operational anomalies., • Submit accurate and detailed daily accounts of work undertaken utilising standard documentation, including any observations beyond the core task., • Communicate with your line manager and equipment manager prior to the end of each working day, to ensure update of works and customer satisfaction., • Development and supervision of operations staff with the intention of increasing direct responsibility (where this is cost effective) for all aspects of electricals and control systems., • Maintain progress on all electrical works to ensure works are carried out in a safe, timely, and efficient manner., • Coordinate the corporate NICEIC accreditation framework., • Coordinate the Fire & Gas protection testing of all units and operating sites in accordance with current statutory regulations., • Develop fault finding, control and replacement manuals/guides for electrical equipment in conjunction with the other electrical staff., • Quality control and fault reporting of adopted plant and equipment., • Supervise and or undertake all necessary installation & commissioning tests and ensure that records are accurate and retained., • Ensure all work and practices are conducted in accordance with current H&S legislation and the Company H&S/Quality policy and procedures., • A commitment to continuous enhancement of skills and knowledge, and that of the engineers collaborating with you., • Ensure detailed inspection and maintenance of site LV electrical equipment., • Supervise and undertake operation of HV switchgear systems., • Replace and Upgrade obsolete Control Systems and telemetry hardware., • Scoping of Electrical Engineering jobs producing clear recommendation for additional works to be conducted., • Prepare, develop and deliver Electrical training in conjunction with other staff., • Preparation of commissioning and testing strategies and setting of standards in conjunction with the Service Manager., • Provide 24-hour call out support cover to respond to operating matters as per agreed rota., • Prioritisation and coordination of your own workload., • Provide support, guidance, and train staff on fault finding, commissioning, inspection, rectification, and remediation., • Attendance at all relevant operational and alignment meetings., • Any reasonable task required by the management in the exercising of its goals., • Extensive knowledge and experience of Electrical asset maintenance, Control Systems, and industrial Plant Commissioning., • Experience with electric/electronic controls spanning 12v DC to 415v AC 3ø configurations., • Advanced fault location, system diagnosis, and physical rectification of systems, PLC frameworks and sequential logic controllers., • Demonstrable proactive experience of “finding out” and research for unfamiliar equipment, its operation, maintenance, common faults and repair., • 18th Edition Wiring Regulations (BS 7671) and Electrical Inspection & Testing Certification (EIT 2391:52 or equivalent)., • HV AP/SAP status (High Voltage Authorised Person / Senior Authorised Person) or actively working towards certification., • Gas Engine Control, Performance Optimisation, and Commissioning (across core platforms including CAT, Perkins, MAN, MWM, MTU, Mercedes, Scania, etc.)., • Gas Safe Accreditation is standard for industrial O&M engineers (or holding a clear, verified pathway to finalise the credential within the initial onboarding probation period)., • Prioritisation and advanced professional organisation, • Current UK Legislation and industrial environmental standards., • Computer literate with proficiency in modern asset management and logic configuration software., • Proactive ability to use own initiative to deliver field service excellence., • Ideal role for an individual who has significant, specialised reciprocating power generation industry exposure., • Self-Motivated and safety-oriented leader., • Ability to adapt to fast changing priorities, new challenges and committed to customer delivery., • Self-Motivated and safety-oriented leader., • Ability to follow clear instructions., • Excellent organisational and time-management skills., • Proven ability to meet tight contract agreed deadlines., • Flexible approach to a varying national workload, regular commercial travel, overnight stays (UK driving license and passport required)., • We value our employees and encourage a work life balance for everyone. We are keen to make sure that our employees are supported in both their work and personal life and our benefits reflect this., • Annual Company Performance related bonus scheme, • Pension (5.5% employer, 3.5% employee contributions), • Death in service 4x salary, • Subsidised Private Health Scheme, • Subsidised Health cash Scheme, • 25 days holiday plus bank holidays, • Extra annual leave option to buy or sell up to 5 days, • 2 extra days holiday after 3 years service, • Birthday leave, • Company Sick Pay, • Company Maternity, Paternity and Adoption pay, • Discounts scheme, • Refer a friend, • EAP (Employee Assistance Programme), • Mental Health First Aiders, • Charity Work Day, • Social Committee for Company Events #J-18808-Ljbffr

At NewOrbit Space, our mission is to engineer the lowest orbiting satellites on Earth to rapidly advance global connectivity and insight. We are currently building satellites that can operate at an altitude of just 200 km - one-third that of conventional satellites. You will be a hands-on technician responsible for the precision mechanical assembly, integration, and test support of the AURA X satellite and thruster system. You will work across the full hardware lifecycle - from assembling and inspecting flight-quality structural assemblies and mechanisms, through building test fixtures and mechanical GSE, to supporting Assembly, Integration and Test (AIT) campaigns on the satellite and propulsion system. As part of a lean AIT team, you will also support the Goods In function - receiving and inspecting incoming mechanical parts, structures, and materials against drawings and purchase orders, and logging them into the programme inventory. You will report into the AIT Lead and work alongside the mechanical design, propulsion, and satellite teams, taking direction from engineers while owning the quality, traceability, and cleanliness of the hardware you build and handle. • Precision mechanical assembly of satellite structure, subsystems, and propulsion system components to engineering drawings and assembly procedures., • Apply and record fastener torques using calibrated tooling in accordance with torque procedures and drawing callouts., • Handle flight hardware in accordance with contamination control, ESD, and cleanliness procedures., • Carry out and maintain cleanroom operations, including monitoring, gowning, and logging to ISO class requirements., • Install thermal blankets (MLI) and other thermal control hardware to procedure., • Build mechanical test fixtures, jigs, and GSE from drawings and instructions., • Support vibration, shock, and structural test campaigns, including fixture build, accelerometer placement, and hardware removal and inspection post-test., • Support integration of the propulsion system into the satellite structure., • Maintain as-built records, travellers, torque records, and non-conformance reports to support full hardware traceability., • Inspect and photograph hardware at defined assembly stages; flag non-conformances to the AIT Lead., • Perform goods in inspection of incoming mechanical parts, structural components, and raw materials — checking against purchase orders, engineering drawings, and certificates of conformance., • Log received items into programme inventory; quarantine and tag any non-conforming or suspect parts for disposition., • Proven hands-on experience in precision mechanical assembly of flight, aerospace, defence, or other high-reliability hardware., • Practical experience applying and recording fastener torques with calibrated tooling., • Experience working in a cleanroom or ISO-classified environment., • Ability to read and interpret mechanical drawings, including GD&T callouts., • Experience building and operating mechanical test fixtures and GSE., • Strong attention to detail and discipline in documentation and traceability., • ESD-aware working practices., • Safety-first mindset, particularly around structural test, pressurised systems, and vacuum environments., • Space industry or satellite assembly experience., • Familiarity with ECSS workmanship standards, particularly ECSS-Q-ST-70., • Experience with MLI and thermal blanket installation., • Basic CAD literacy (SolidWorks, CATIA, or similar) for interpreting models and marking up drawings., • Experience supporting structural test campaigns (vibration, shock, static load)., • Experience with propulsion system assembly or pressure system hardware. Meticulous and process-disciplined — takes handling and cleanliness seriously as a matter of instinct, not instruction. Safety-first mindset, particularly around structural test, pressurised systems, and vacuum environments. Comfortable working in a fast-moving development environment where hardware and procedures evolve quickly. Collaborative team player who can take direction from engineers while owning the quality of the hardware they build. • Pioneering Space Technology – You'll contribute to launching groundbreaking technology into space. Your work on our revolutionary ion propulsion system and ULEO satellite platform will redefine satellite operations and disrupt traditional LEO operations., • Unmatched Ownership and Impact – You'll experience a level of ownership that's rare in the space industry. You will participate in the full lifecycle of satellite technology., • Equity and Competitive Salary – You'll receive not just a competitive salary but also company ownership stakes. Your dedication and hard work are rewarded with a share in the technology you help build, ensuring you're a part of our collective success., • Comprehensive Benefits Package – Including private health insurance with dental and optical coverage, annual healthcare check-ups etc., • Hybrid Work - A hybrid setup with one dedicated remote day per week., • Visa Sponsorship & Relocation Support - We provide a relocation package and sponsor your visa if you’re joining us from abroad. #J-18808-Ljbffr

• Own the writing, review, and maintenance of all assembly instructions, work instructions, and build procedures - from component level through to integrated module on the propulsion system., • Write and own test plans and test procedures for propulsion campaigns, including pressure test, proof test, leak test, functional flow test, and performance characterisation., • Maintain the AIT schedule for the propulsion system, interfacing with test facilities and ensuring all GSE is available for each test in the plan., • Ensure that all equipment is kept calibrated., • Develop and maintain hazardous operations procedures for all pressurised system activities, in line with safety requirements defined for the programme., • Write propellant handling and loading procedures., • Execute test and assembly procedures hands-on, operating test rigs and instrumentation and recording results to programme traceability standards., • Maintain the propulsion procedure library - version control, review cycles, and configuration management of all procedural documents., • Support integration of the propulsion system into the satellite structure, contributing assembly procedures for the integration sequence., • Manage non-conformances on propulsion hardware - raising NCRs, supporting dispositions with the propulsion design team, and updating procedures where needed., • Perform goods in inspection of incoming components, against purchase orders, drawings, and certificates of conformance., • Coordinate with technicians ensuring tasks are understood and completed in line with the schedule., • Support environmental test campaigns involving the propulsion system, contributing test procedures and witnessing campaigns., • Support satellite AIT activities., • 3+ years' experience writing test procedures, assembly instructions, or work instructions for mechanical, fluidic, or propulsion hardware in a flight or high-reliability environment., • Practical hands-on experience executing the procedures you write - comfortable on the bench as well as at the desk., • Experience with pressurised systems - sufficient to write safe, compliant procedures and execute them competently., • Ability to read and interpret engineering drawings, schematics, and system documentation to produce accurate procedural content., • Good documentation discipline - understands version control, review processes, and what traceability means in a flight programme context., • ESD-aware working practices and understanding of contamination control requirements., • Strong safety mindset around pressurised and hazardous operations., • Experience in a space, aerospace, defence, or other high-reliability industry environment., • Familiarity with pressure testing methods (proof, leak, burst, flow) and the standards that govern them., • Experience with vacuum chamber operation and maintenance., • Experience with electric propulsion systems or vacuum test environments., • Familiarity with ECSS standards or equivalent quality and workmanship frameworks., • Experience handling xenon or other inert propellants, including loading and facility operations., • Background in mechanical AIT as well as propulsion - comfortable contributing to wider satellite integration activities. #J-18808-Ljbffr

Locations: Aldermaston United Kingdom, Reading RG7, United Kingdom. This position is available at multiple locations. In order to work in Ireland a non‑EEA National, unless exempted, must hold a valid employment permit. Please review the eligibility and requirements for an employment permit if you are unsure of your eligibility to apply for this vacancy. • Proficient communicator: clearly communicate project details., • Problem‑solving ability: quickly identify and resolve issues., • Technical competence: strong understanding of methods, materials and technical aspects relevant to the project., • Client relationship management: build and maintain positive relationships., • Technical duties: management of site control & setting out; ensuring accurate information for subcontractors; managing subcontract packages of works; quality control of sub‑contractor works., • Design coordination: ensure models and drawings are accurate and constructible; raise any issues or requests for information with the Design team in a timely manner., • Quality assurance: compile Inspection & Test Plans and Reports; raise non‑conformances; compile as‑built drawings as construction progresses., • Site reporting: contribute to labour and material cost reports., • Procurement: liaise with Commercial team to ensure packages are procured in accordance with programme requirements; weekly/4‑weekly look‑ahead programmes; checking delivery of works against design., • Method Statements and Risk Assessments., • Health & safety: complete site inspections., • Compiling handover documentation., • HNC/Degree in Civil Engineering / Building., • CSCS., • Subcontract management experience in groundworks, reinforced concrete and temporary works., • Previous use of total station and GPS., • Thames Water Passport (desirable)., • SMSTS (desirable)., • Knowledge of CAD., • Driver’s licence (essential)., • 25 days annual leave plus 8 bank holidays., • Competitive base salary with annual salary reviews., • Life Insurance Pension., • A company laptop and phone., • Access to EAP – 24/7 365 days confidential employee counselling service, free to avail for employees and families. Glanua is an industry leader in providing innovative and sustainable engineering solutions to design, build, operate and maintain critical water and wastewater infrastructure across Ireland and the UK. We are a trusted provider to the municipal and industrial sector where our clients include Ireland and the UK’s largest water utilities, Uisce Éireann (formerly Irish Water), Thames Water, Yorkshire Water and Affinity Water. Glanua is passionate about solving today’s environmental challenges and delivering a decarbonised and sustainable world. We know that to build successful creative teams we need a diverse workforce that can deliver new innovative ways of thinking. We provide an environment where you will have the freedom to develop and grow to your full potential. We champion our core values and uphold the highest standards of safety, well‑being, innovation and integrity. • Construction, • Not required #J-18808-Ljbffr

Location: Reading, Berkshire (On-site) XYZ Reality are the creators of the world's first and only engineering-grade Augmented Reality solution, purpose built for the construction industry. Not only have we created this holographic technology, that sits within The Atom — a smart, site-safe headset/hardhat — but we implement it on projects, utilising the power of AR to ensure that all schemes are completed in line with delivery timescales and budgets. XYZ has grown to over 100 staff across the UK, US & Europe and is working with Mission Critical organisations & construction companies to successfully deliver major projects. This role sits within the Production team at our NPI facility in Reading, Berkshire, reporting to the Production & Quality Director. As Senior Production Engineer, you will be the senior engineering lead for production at the facility — combining hands-on technical depth in robotics and electrical engineering with day-to-day leadership of the assembly, test and calibration team. You'll own how XYZ's AR devices are built, tested and calibrated, and how that process scales — accountable both for delivery against the build plan and for the manufacturing engineering that makes the plan achievable. This includes leading the move from a prototype build process to one designed for volume. • Lead the assembly, test and calibration team day to day — allocating work against the build plan, developing team capability through skills matrix and cross-training, and mentoring assembly and test engineers., • Own the robot calibration and configuration processes that set the accuracy of XYZ AR devices; own production test systems including test rigs, acceptance criteria, measurement capability and calibration control., • Establish a measured build-and-test cycle time per unit; own manufacturing process design and improvement — cycle time, first-time-right yield, rework reduction and labour efficiency., • Lead the move from prototype build to volume production — NPI, first-article builds, process validation, jigs and fixtures, and identifying and implementing automation opportunities., • Lead root-cause analysis on returns and field failures and drive corrective actions to closure under ISO 9001 clause 10.2; set in-process quality gates and inspection criteria., • Own build documentation — create and control assembly, test and calibration work instructions under the QMS; support engineering change implementation on the production side., • Degree or equivalent in electrical, electronic, mechatronic or manufacturing engineering., • Substantial hands-on electrical and electronic engineering experience on complex products — schematics, harnesses, PCB-level fault-finding, measurement and instrumentation., • Demonstrable robotics experience: programming, calibration, configuration and integration into a production or test process., • Experience leading a small technical team with evidence of developing people, not just directing them., • Track record of scaling a low-volume, high-complexity build — process design, yield improvement and automation., • Experience taking a product from prototype into repeatable production., • Comfortable with command-line tools, firmware installation and test scripting., • Experience working to ISO 9001, including NCR and corrective action processes., • Confident user of ERP and inventory management systems., • A hands-on leader who sets the standard personally and holds the team to it., • 25 days annual leave + public holidays, • Private healthcare with Vitality, • Christmas shutdown days on top of leave allowance (2–4 per year usually), • Biannual salary reviews, • Summer & Christmas staff parties, • Employee referral scheme, • Cycle to Work scheme, • Make a real-world impact of revolutionising the construction industry Find Jobs in United Kingdom on Arbeitnow #J-18808-Ljbffr

Department: Civil Employment Type: Permanent - Full Time Location: South East England Reporting To: Laurent Wallis Join Trant Engineering and help shape the delivery of complex, high-impact projects. Trant Engineering is a leading EPC contractor with a strong reputation for delivering innovative engineering solutions across the UK and internationally. Our Water & Process team deliver engineering solutions for water and wastewater utility providers. With over 1,000 employees and a £150m turnover, we’re growing—and now looking for a Site Civil Engineer to play a key role in our project delivery teams. The Site Civil Engineer is responsible for the on-site delivery and coordination of civil engineering works ensuring that civil structures, earthworks, drainage, and associated infrastructure are delivered safely, to programme, to quality standards, and in compliance with design specifications and regulatory requirements. Technical Responsibilities - Civil Engineering Delivery • Supervise and inspect civil works including earthworks, foundations, drainage, retaining structures, concrete and steel structures, and associated civil infrastructure., • Review and interpret civil engineering drawings, specifications, method statements, and construction programmes., • Support setting out and verification of civil works on site., • Identify, report, and help resolve technical issues, non-conformances, or design discrepancies. Safety, Health, Environmental & Quality & Compliance • Promote and enforce safe systems of work, including risk assessments and method statements., • Monitor site safety compliance and environmental controls for civil works., • Participate in safety inspections, audits, and toolbox talks., • Ensure all civil works meet design, quality, and regulatory standards., • Assist in testing, inspections, and approvals of civil works., • Maintain accurate site records, including daily logs, inspection reports, and as-built documentation. Stakeholder Supervision • Liaise with project managers, site managers, and design teams to support project delivery., • Coordinate with subcontractors and suppliers to ensure civil works are delivered according to programme and specification., • Support commissioning and handover of civil infrastructure., • Provide technical guidance and mentoring to junior engineers or site staff., • Support lessons learned initiatives and promote best practice in civil engineering delivery., • Assist in improving processes, standards, and site procedures. Key Interfaces: Internal Interfaces • Project Managers and Senior Project Managers, • Site Managers / Construction Managers, • Design Engineers and Technical Leads, • Mechanical, Electrical, and Instrumentation Teams, • Health, Safety & Environmental Teams, • Quality and Project Controls Teams External Interfaces • Client representatives (water companies, energy providers, industrial clients), • Civil subcontractors and suppliers, • Third-party inspectors, consultants, or regulators, • Contractors delivering complementary works (mechanical, electrical, or process) Core Values Uphold and promote the Company’s Core Values – Care, Trust, Respect and Sustainability. Essential • Site safety certification, e.g., CSCS (or willingness to obtain), • Practical site-based civil engineering experience, including earthworks, drainage, foundations, structures, and setting out skills., • Experience reading and interpreting civil engineering drawings, specifications, and method statements., • Experience coordinating and supervising subcontractors and site teams., • Experience working to health, safety, quality, and environmental standards on site. Desirable • NVQ, Degree, HNC, or HND in Civil Engineering, Construction, or related discipline., • Formal training in site management or construction supervision., • Familiarity with water and energy sector standards and regulatory requirements., • Experience in water, wastewater, or energy infrastructure projects., • Experience supporting commissioning, testing, or handover of civil works., • Experience liaising with clients, regulators, or third-party inspectors., • Experience mentoring junior engineers or site staff. At Trant Engineering, we deliver complex, high-value engineering and construction projects across the UK. From process and water treatment to energy infrastructure upgrades, we play a key role in delivering and protecting critical national infrastructure – shaping the systems that communities and industries rely on every day. Our teams design and deliver full EPC solutions, combining technical excellence with practical, hands‑on delivery. We offer end‑to‑end capabilities – from concept and design through to manufacturing, construction and commissioning utilising a continually evolving in‑house expertise. This means you’ll work on projects that are varied, challenging and genuinely impactful. Our multi‑disciplinary teams bring together specialists in civil, mechanical, electrical, process, instrumentation, and control & automation engineering, alongside our in‑house manufacturing of control panels, MCCs, PLCs and SCADA systems. With over 1,000 people and a strong, growing pipeline of work, it’s an exciting time to join Trant. We are committed to helping our people succeed through our Career Development Association, providing structured support, mentoring and clear pathways to help you reach your full potential. Whether you’re starting out or looking to take your next career step, Trant offers the chance to develop, progress and make a real difference. Our company benefits package includes. • Competitive salary., • Company car or car allowance (some levels)., • Mentored support within our ‘Career Development Association’, to work towards chartership., • 24 days holiday (increasing with service) + 8 bank holidays., • Options to buy additional holiday via salary sacrifice., • Company Pension Scheme., • Flexible working based on a ‘core hours’ system., • 1 x Professional Membership paid annually., • Hybrid working., • Employee Assistance Program., • Free onsite parking., • Bike to Work Scheme., • Discretionary annual bonus. #J-18808-Ljbffr

Requisition ID: 295975 • Relocation Authorized: None, • Telework Type: Part-Time Telework, • Work Location: Reading Atomic Weapons Establishment (AWE) has supported the UK Government’s nuclear defence strategy for over 75 years, providing innovative solutions in nuclear and non‑nuclear facilities. Bechtel collaborates with AWE to deliver preliminary design for the Future Materials Campus, ensuring the project is completed on schedule and within budget. This position is for a Mechanical Equipment Engineer on a multi‑year contract for a UK nuclear infrastructure programme. The engineer will support the Engineering Manager via the Project Engineer for Process, Plant and Equipment (PPE) as the technical representative for Mechanical engineering activities within the PPE team. Responsibilities include preparing technical reports, studies, design calculations, procurement documentation, and supporting design reviews. • Participate in optioneering and prepare design philosophies for mechanical equipment., • Prepare mechanical equipment deliverables including Basis of Design (BoD), system definitions, calculations, performance standards, equipment specifications, layouts, inspection plans, test plans, and review deliverables from other disciplines in line with requirements and applicable codes., • Design equipment such as dissolvers, ion exchange columns, precipitation vessels, storage and buffer tanks, condensers, etc., • Produce drawings and 3D models to support facility designs through Concept Design., • Support studies assessing the environmental impact and sustainability of the proposed design and construction approach., • Participate in workshops such as 3D model reviews, HAZID, HAZOP, constructability reviews, and value engineering, ensuring compliance with safety and quality standards., • Provide inputs to safety cases and regulatory documentation., • Participate in the preparation of Interface Control Documents (ICDs) and resolve interface issues., • Address manufacturing, fabrication, and installation requirements., • Document lifecycle aspects: operations, maintenance, material movement philosophies, and decommissioning., • A recognised bachelor’s degree in mechanical engineering from an accredited college or university., • Minimum 6 years post‑graduation design experience, with at least 3 in the nuclear industry preferable., • A Chartered Engineer designation., • Experience designing mechanical equipment for the nuclear industry., • End‑to‑end mechanical design capability from concept to implementation., • Strong mechanical system and equipment design expertise., • Proficiency in engineering calculations and technical documentation., • Knowledge of engineering codes, standards, and legislation., • Experience defining test and verification strategies (FAT/SAT)., • Ability to identify and mitigate technical risks., • Multidisciplinary integration (mechanical, electrical, civil)., • Supplier evaluation and technical delivery support., • Strong critical thinking and problem‑solving skills., • Strong organisational skills., • Relevant industrial experience, with general nuclear experience a plus., • Must obtain Security Clearance (SC) for access to the AWE site. The role is based primarily at Aldermaston UK, with travel to Bechtel’s London office as required. Flexibility includes three days per week on site and two days from home or the Bechtel office. Only UK Nationals are eligible for this position. This position is subject to a successful interview and agreement upon terms and conditions of employment. Bechtel offers comprehensive benefits to support career development, program delivery, and well‑being. Learn more at Bechtel Total Rewards. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, citizenship status (except as authorized by law), protected veteran status, genetic information, or any other characteristic protected by federal, state, or local law. We are committed to providing reasonable adjustments for those with disabilities throughout the recruitment process. Please contact us at if you need an inclusive application environment. Bechtel is a verified company with the Disability Confident Scheme. #J-18808-Ljbffr

Test Technician Salary: £38,000 - £40,000 per annum Location: Reading Hours: 8.30am until 5pm (with flexible start/finish time). ReeVR Talent are looking for a Test Technician to join our client's manufacturing facility in Reading. Working alongside the Production Engineering team, you will be responsible for the assembly, testing and calibration of complex electro-mechanical products. This Test Technician position is a hands on role where you will build products to defined standards before carrying out testing and calibration to ensure they meet the required quality and performance criteria. Key Responsibilities Assemble complex electro-mechanical products in line with SOPs and specifications. Carry out testing, calibration and configuration of production equipment and devices. Perform in-process and final testing against defined acceptance criteria. Accurately record test and calibration results against product serial numbers. Maintain calibration records and support the control of production test equipment. Install and verify software and firmware during assembly and testing. Investigate faults and support repair and rework of failed or returned products. Identify and report non-conforming products through the relevant quality processes. Write, update and improve SOPs, work instructions and test procedures. Support goods-in inspection and ensure components meet the required acceptance criteria. Work closely with Engineering, Production, Quality and Logistics teams to resolve issues. We are looking for a Test Technician with: Hands-on experience in assembly and testing of electro-mechanical products. Experience with test, calibration and measurement equipment. Good fault-finding and debugging skills across mechanical and electronic assemblies. The ability to follow and improve test procedures, SOPs and acceptance criteria. Experience installing and verifying software or firmware. Comfortable using basic command-line tools and computer-based test systems. An understanding of calibration, traceability and quality requirements. Strong attention to detail and accurate record-keeping skills. Good IT skills, including Microsoft Office. A practical, methodical approach with the ability to work independently and as part of a team. Why Join? This is an excellent opportunity for a hands-on Test Technician to join an innovative environment, working across assembly, testing, calibration and fault finding while helping to ensure products meet the highest standards before release. If you have experience in electro-mechanical assembly, testing or calibration and enjoy working in a technical manufacturing environment, we would love to hear from you. Contact Abby Maslin @ ReeVR Talent to apply or to find out more. TPBN1_UKTJ

Job Specification – Track Maintenance Team Leader with COSS Location: Reading and surrounding routes Reporting to: Project Manager Role Purpose The successful candidate will have a strong practical background in railway track maintenance and a detailed understanding of working safely on or near the operational railway. They will be responsible for leading teams, coordinating work activities and ensuring that all maintenance work is completed safely, efficiently and to the required Network Rail standards. The role requires a hands‑on leader who can make sound decisions under pressure, communicate effectively with the workforce and management, and maintain a consistently high standard of safety. • Lead and supervise track maintenance teams during planned and reactive maintenance activities., • Act as an experienced Controller of Site Safety (COSS) where required., • Take responsibility for establishing and maintaining safe systems of work within the limits of the COSS role., • Deliver clear and effective safety briefings to track teams before work commences., • Ensure all staff understand the relevant Safe Work Pack, risks, controls and site arrangements., • Carry out dynamic risk assessments and respond appropriately to changing site conditions., • Ensure track maintenance activities are carried out in accordance with Network Rail standards, procedures and approved methods of working., • Supervise track maintenance, renewals, repairs and inspection activities., • Monitor the condition of track, track components and associated infrastructure, reporting defects and issues appropriately., • Support planned and reactive maintenance activities, including responding to faults and defects., • Work safely within possessions, line blockages and engineering hours., • Coordinate with Signalling & Telecoms, Electrification & Plant, Operations and other maintenance disciplines where required., • Liaise with Engineering Supervisors, Site Supervisors, Section Managers and other Network Rail personnel., • Ensure plant, tools, materials and equipment are available and suitable for the planned work., • Check that staff are competent and appropriately briefed for the tasks being undertaken., • Monitor the quality of completed work and ensure defects are rectified appropriately., • Ensure work sites are left safe, secure and compliant following completion., • Report incidents, near misses, defects and safety concerns promptly., • Support investigations and implement corrective actions where required., • Maintain accurate site records, work documentation and safety paperwork., • Mentor and support less‑experienced members of the track maintenance team., • Promote a strong safety culture and challenge unsafe behaviours or working practices., • Stop work where conditions become unsafe and escalated issues through the appropriate management channels. The successful candidate should have substantial practical experience in railway track maintenance, with knowledge of activities such as: • Track inspection and maintenance., • Track defect identification and reporting., • Rail replacement and repair., • Sleeper replacement., • Ballast maintenance and regulation., • Track geometry and alignment., • Points and crossings maintenance., • Track renewals and refurbishment., • Fishplate and rail fastening systems., • Joint maintenance and repairs., • Hand tamping and/or mechanised maintenance activities., • Use of track tools, equipment and plant., • Working within possessions and line blockages., • Preparation and reinstatement of the track following maintenance activities., • Experience of working across different track maintenance environments would be highly advantageous. Safety is the primary responsibility of the role. The Team Leader must: • Maintain a safety-first approach at all times., • Ensure the workforce is properly briefed before work starts., • Confirm that safe working arrangements are in place., • Identify and control hazards associated with track maintenance., • Maintain awareness of train movements, adjacent lines and other operational risks., • Ensure staff use the correct PPE and equipment., • Challenge unsafe acts and behaviours., • Ensure the limits of the safe system of work are understood and maintained., • Stop work when required to protect people or railway infrastructure., • Escalate safety-critical issues immediately. The candidate should hold current and relevant railway competencies, including: • COSS – current and valid., • PTS – current and valid., • Relevant track maintenance competencies., • Relevant track inspection/maintenance competencies applicable to the position., • Appropriate track machinery/plant competencies where required., • Relevant Network Rail safety and operational competencies. We are an equal opportunity employer and value diversity in our company. We do not discriminate on the basis of race, religion, colour, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status. #J-18808-Ljbffr

Bridges is listed on the Sunday Times Top 100 Places to Work 2024 and is a family‑run business dedicated to supporting engineering and construction across the UK. Contracted to 40 hours per week, Monday to Friday. Paid hourly with overtime paid at an inflated rate on weekends. Travel time paid door to door. Company van provided. Covering the Thames Valley area for Thames Water, the role involves modifying control panels and telemetry equipment at various sites. This includes telemetry outstation replacements and multi‑smart systems. • Complete electrical installations in accordance with BS 7671 and Bridges Electrical Safety Rules and Essential Standards., • Ensure all Health and Safety legislation and regulations are adhered to., • Ensure all items are installed to the highest standards, in compliance with the project's quality plan, inspection and test plans., • Follow and actively promote the STAR dynamic risk assessment and be empowered to stop work if unsafe circumstances arise., • Promote and demonstrate Bridges’ values when dealing with peers, staff, customers and clients., • Coach and mentor Electrical Improvers and Apprentices., • ECS Gold Card (essential)., • Experience with telemetry outstation replacements or MultiSmart systems., • Panel wiring and modifications experience., • Experience within industrial (ideally water) industries., • Fitness to work medical., • Always follows best practice with a positive attitude towards Health and Safety., • Full UK driving licence., • PASMA / IPAF / Confined space., • EUSR & Thames Water Passport., • Inspection and testing certificate., • Emergency first aid or first aider., • CCNSG (or similar)., • CompEx., • Competitive salaries., • Health cash plan with Healthshield., • Standard Life Pension Scheme – 5% company contribution., • Life Assurance Scheme., • Employee Discount Scheme., • Bike 2 Work scheme., • Training and development opportunities., • Employee referral scheme – £1,000 if you successfully introduce someone., • Employee recognition schemes., • Enhanced maternity and paternity pay., • RoSPA Gold Medal award for health and safety., • Armed Forces Covenant Gold Award holder., • Support for armed forces community. Bridges is an equal‑opportunity employer and is committed to ensuring equality and diversity within the workplace. #J-18808-Ljbffr

6 days ago Be among the first 25 applicants Get AI-powered advice on this job and more exclusive features. Bridges CSMB are looking for quality electrical engineers We are seeking a highly skilled and experienced Industrial Electrician to join our dynamic team. The ideal candidate will have an ECS Gold Card, a valid driving licence, and proven experience in fault finding on 3-phase machinery and control systems. This role offers the flexibility of being based from home, with the expectation to travel and work away at times. As this is a client-facing role the candidate must possess excellent interpersonal skills. This is an exciting opportunity for someone looking for an employer that promotes the advancement of their engineers' careers. A business that will give you all the training required to be able to fulfil your tasks. Salary is negotiable. Come and talk to us about what we could do together. The Role Contracted to 40hrs per week Monday to Friday. Paid hourly, with overtime paid. This is a field-based role. You will be paid your travel time door to door. Company van provided. Primary duties will include: • Driving to the job location, • Project installation, • Infrustructure maintenance, • Inspection & testing, • Fault diagnosis and rectification Customised Solutions, Maintenance & Breakdown (CSMB) Since the 1980's Bridges have been supporting the aggregates industry with all aspects of electrical support and we now have an impressive portfolio of high-profile clients who look to us to provide them the answers and security they require from a support partner. As a CSMB engineer, you will not just be another electrician you will have the freedom to make the role your own, we actively encourage all elements of career progression and reward people who reach above and beyond. Across our key sectors - Water, Power, Energy and Aggregates, and supported through our regional office network supported by our manufacturing hub located in the heart of Somerset which forms part of our 60,000ft head office complex - we deliver diverse and interesting projects throughout UK infrastructure. We deal with a wide range of client demands including: Electrical safety management systems (ESMS) Design and delivery of a diverse range of projects, these include: • Automatic road barrier installs, • Traffic management design and install, • Design and installation of site power infrastructure, • Install site equipment e.g field conveyors, stone crushers, belt weighers etc, • Control panel build and modification Requirements • ECS gold card (essential), • Fitness to work medical, • Full UK driving licence, • Experience with 3 phase motors and control systems, • Ability to read electrical drawings Desirable • Test and Inspect, • PASMA / IPAF, • Industrial and/or panel wiring experience Benefits BENEFITS OF WORKING FOR BRIDGES RoSPA Gold Medal winner, Bridges - is an excellent company to work for and a great place to develop your career. Our goal is to exceed the very highest standards and ensure our people work in a culture of health, safety and well-being. We are currently holders of the Armed Forces Covenant Silver Award, which reinforces our commitment to supporting the armed forces community. We are a family-run business with a friendly and welcoming culture, and we are dedicated to helping our employees learn, develop, and achieve success - along with us and throughout their careers. We are listed on the Sunday Times Top 100 Places to Work 2024. Bridges also offers an excellent benefits package: • Competitive salaries, • Health cash plan with Healthshield, • Standard Life Pension Scheme - 5% company contribution, • Life Assurance Scheme, • Employee Discount Scheme, • Bike 2 Work scheme, • Training and development opportunities, • Employee referral scheme - £1,000 if you successfully introduce someone, • Employee recognition schemes, • Enhanced Maternity and Paternity pay When you join us, you'll be part of our exciting journey. Wherever your journey begins with us, through mutual engagement, we'll make sure you are supported and invested in. We believe in ‘team bridges' and leadership at all levels with our guiding principles: Safe People, Happy People, Sustainable Business. Come and be part of our team! Bridges is an equal-opportunity employer and is committed to ensuring equality and diversity within the workplace. • Mid-Senior level, • Full-time, • Non-profit Organizations and Primary and Secondary Education Referrals increase your chances of interviewing at Bridges - Trusted Intelligent Engineering Partner by 2x Get notified about new Electrical Engineer jobs in Reading, England, United Kingdom. Abingdon-On-Thames, England, United Kingdom 3 weeks ago Frimley, England, United Kingdom 2 weeks ago Reading, England, United Kingdom 3 weeks ago Wokingham, England, United Kingdom 3 months ago Reading, England, United Kingdom 1 week ago Winnersh, England, United Kingdom 1 month ago Little London, England, United Kingdom 3 weeks ago Basingstoke, England, United Kingdom £28,000.00-£40,000.00 4 hours ago Reading, England, United Kingdom 3 weeks ago Reading, England, United Kingdom 1 week ago West Drayton, England, United Kingdom 1 month ago Oxford, England, United Kingdom 5 days ago High Wycombe, England, United Kingdom 3 weeks ago Didcot, England, United Kingdom 2 weeks ago Oxford, England, United Kingdom 2 months ago Reading, England, United Kingdom 4 weeks ago Abingdon-On-Thames, England, United Kingdom 5 days ago Reading, England, United Kingdom 1 week ago Aldermaston, England, United Kingdom 5 days ago Guildford, England, United Kingdom 1 month ago Abingdon-On-Thames, England, United Kingdom 3 weeks ago Sonning, England, United Kingdom 6 days ago Harwell, England, United Kingdom 11 hours ago Didcot, England, United Kingdom 1 week ago Culham, England, United Kingdom 3 weeks ago High Wycombe, England, United Kingdom 2 weeks ago Slough, England, United Kingdom 4 weeks ago We’re unlocking community knowledge in a new way. Experts add insights directly into each article, started with the help of AI. #J-18808-Ljbffr

We are currently supporting a leading technology company who are looking to add a Repairs Technician to the team. This is a full-time permanent basis. Key Responsibilities: • Diagnose and confirm customer-reported faults using defined procedures, test equipment, jigs and fixtures., • Disassemble and reassemble customer equipment, including the replacement of standard components., • Carry out PCB-level soldering and defined hardware modifications in accordance with approved work instructions., • Repair customer equipment using established procedures, service tools and test jigs., • Conduct structured testing, inspection and verification to confirm successful completion of repairs., • Ensure repair activities are completed accurately and efficiently to meet product turnaround and service level requirements., • Maintain the availability, organisation and control of spare parts within the designated repair area., • Support internal and customer-driven hardware modification programmes., • Escalate technical issues, risks and potential delays promptly to the line manager. The ideal candidate must have: • A methodical and quality-focused approach to fault diagnosis, repair and testing., • Higher-level education such as a GNVQ, BTEC or A Levels., • Previous experience working within an electronics manufacturing, repair or service environment., • Experience undertaking PCB-level soldering and electronic component replacement., • The ability to work accurately and consistently within defined procedures and quality standards., • The ability to identify and escalate technical issues and risks appropriately., • A willingness to work within a fast-paced environment while maintaining high standards of workmanship and documentation., • The ability to obtain and maintain the required UK Security Clearance (SC). If this role looks like your next challenge, please contact Ben ASAP or apply via this advert! We endeavour to reply to every candidate, every time but if you haven't heard back within 10 days, please understand that you have unfortunately been unsuccessful for this position, or the position has been filled. Please call the office or send an email to discuss other potential positions. JBRP1_UKTJ

Are you a proven Quality Management professional with extensive experience in the defence or highly regulated construction sectors, ready to lead high-profile projects at Aldermaston? Can you demonstrate expertise in developing and implementing comprehensive Quality Plans, leading audits, and managing cross-functional teams to deliver results under stringent safety and compliance standards? If you thrive on challenging environments that demand precision, initiative, and strategic oversight, then this opportunity offers a unique chance to impact a major defence project. Join a company committed to excellence, innovation, and integrity within a culture that values every team member’s contribution. Recognised for its forward-thinking approach and dedication to continuous improvement, this organisation fosters a supportive environment that promotes professional growth and sustainable success. Working here means being part of a purpose-driven team working on some of the most advanced defence projects, with a focus on safety, quality, and collaboration. As the Quality Management Lead, you will oversee the full project lifecycle, ensuring compliance with client quality requirements across design, procurement, manufacturing, testing, shipping, construction, and commissioning phases. You will manage a team of quality professionals, lead investigations into non-conformities, support client and third-party audits, and develop project quality documentation including Inspection and Test Plans and Project Quality Plans. Your daily tasks will involve quality assurance activities, monitoring audit findings, driving continuous improvement, and maintaining effective stakeholder relationships. • Proven experience in Quality Assurance/Control within the civil nuclear or defence industries, • Extensive knowledge of ISO 9001 standards, with Lead Auditor qualifications and supporting third-party audits, • Demonstrable leadership skills in regulated environments, with a track record of delivering results on complex projects, • Strong analytical and problem-solving abilities, with excellent negotiating and conflict resolution skills, • Ability to develop and implement quality procedures, work instructions, and inspection/test plans, • Membership with the Chartered Quality Institute (CQI) preferred, and current SC clearance or the ability to obtain it Millbank Holdings Ltd is an equal opportunities employer committed to creating an inclusive and diverse workforce. We welcome applications from all suitably qualified individuals, regardless of background, and encourage candidates from underrepresented groups to apply. We are proud to be a member of the Disability Confident Scheme, and we are committed to ensuring an accessible and supportive recruitment process for everyone. #J-18808-Ljbffr

The Opportunity: Asset Manager Contract: Permanent Location: Reading / South East England United Plant Services is a specialist engineering and asset management business, renowned for delivering market-leading engineering support and fleet management solutions for Heavy Mobile Equipment (HME) across the quarrying, waste, and recycling sectors. As part of the Briggs Equipment Group , one of the UK's leading providers of asset management and maintenance solutions, we pride ourselves on delivering exceptional service, technical expertise, and customer-focused solutions. If you don't feel you meet every requirement listed below, we would still encourage you to apply. We recognise that experience comes in many forms and are committed to developing talented individuals. The Impact you will have: Building strong working relationships through direct interaction with customer sites and Quarry Management teams Monitoring the quality and service delivery of onsite repairs and maintenance activities, ensuring engineers operate in compliance with all mandatory standards and procedures Managing asset maintenance costs within budget by identifying cost-effective repair solutions and assessing repair versus replacement options Supporting managers with customer complaint investigations and recommending effective corrective actions Monitoring machine health using oil sample analysis, telematics, and diagnostic reports Providing technical guidance and onsite feedback to support the Call Centre and Service Control teams Providing cover for relevant Field Service Control functions during periods of annual leave Advising customers on machine applications and recommending suitable alternative equipment solutions where appropriate Conducting machine inspections, managing damage assessments, and supporting the onsite rental process Ensuring daily equipment inspection processes are completed and assisting with training initiatives, including toolbox talks Identifying and driving continuous improvement opportunities across the operation Working closely with the United Plant in-house Engineering team to deliver exceptional service standards Promoting the company's vision, values, and positive safety-first culture in all activities What will help you to excel in this role: We're looking for a technically competent and commercially minded professional who can build strong customer relationships while ensuring assets deliver maximum performance and value. You'll bring: Experience managing customer concerns and complaints professionally, achieving positive outcomes and high levels of customer satisfaction Strong technical knowledge of plant machinery and Heavy Mobile Equipment (HME), including a thorough understanding of machine applications in the field Excellent interpersonal and communication skills, with the ability to build and maintain relationships at all levels of an organisation Strong commercial awareness, including an understanding of P&L performance, cost management, and balance sheet governance The ability to analyse asset performance and make informed recommendations that support operational and financial objectives Strong problem-solving skills and a proactive approach to identifying opportunities for improvement High levels of computer literacy, with strong report-writing and administrative capabilities Experience working across multiple OEM brands, including core quarrying equipment and ancillary product ranges A customer-focused mindset with a commitment to delivering exceptional service and operational excellence What You Can Expect From Us A rewarding role with a leading engineering and asset management business Future development and career progression opportunities Contributory pension scheme with employer contributions Paycare and eyecare health scheme Access to a range of high street discounts and employee benefits The opportunity to work with industry-leading equipment and customers across the UK What's next If you are interested in joining the Briggs Group then please click on the apply now button and a member of the team will be in touch Not sure if this is the right role for you? Please feel free to visit the careers page on our website and send us your CV speculatively for a member of the team to review If you require any reasonable adjustments to assist you in the interview process, then please contact a member of the Recruitment team and inform them prior to attending so we can ensure these are met TPBN1_UKTJ

ICON plc is a world-leading healthcare intelligence and clinical research organization. We’re proud to foster an inclusive environment driving innovation and excellence, and we welcome you to join us on our mission to shape the future of clinical development. We are seeking an experienced Pharmacometrics Support Programmer to join a global FSP team. This is an opportunity for a highly analytical programmer with strong R programming expertise and experience in PK/PD data preparation to contribute to critical drug development programmes. In this role, you will be responsible for the creation, quality control, and standardisation of NONMEM PK/PD datasets, supporting pharmacometric modelling activities across a diverse clinical portfolio. Working closely with Data Management, Statistical Programming, Statistics, Bioanalytical teams, and external partners, you will play a key role in ensuring high-quality pharmacometric data is delivered on time and to the highest regulatory standards. • Develop and quality control NONMEM PK/PD datasets using SDTM and ADaM data sources., • Support pharmacometric modelling activities by delivering accurate, complete, and submission-ready datasets., • Perform quality review of internally and externally produced NONMEM datasets., • Collaborate with Data Management, Statistical Programming, Statistics, Clinical Pharmacology, and Bioanalytical teams to resolve data issues and ensure project timelines are met., • Contribute to the preparation of regulatory submission projects in accordance with internal pharmacometrics guidelines., • Conduct quality control testing of customised R packages used to standardise pharmacometric workflows., • Develop and maintain testing frameworks and validation processes for departmental R tools and packages., • Identify data discrepancies, process improvements, and opportunities for greater automation and efficiency., • Actively contribute to the development and implementation of new pharmacometric standardisation initiatives., • Ensure all deliverables comply with applicable SOPs, working instructions, regulatory requirements, and ICH-GCP guidelines., • Maintain inspection readiness through ongoing training and adherence to quality standards., • Bachelor's degree in a Life Science, Health Science, Statistics, Computer Science, IT, or related discipline., • Minimum of 6 years' experience within the pharmaceutical, biotechnology, or CRO industry., • Strong programming expertise in R., • Experience developing and quality controlling NONMEM PK/PD datasets., • Working knowledge of PK/PD principles and pharmacometric workflows., • Strong understanding of SDTM, ADaM, and CDISC standards, including controlled terminology., • Experience supporting NONMEM file creation, quality control, submissions, and standardisation activities., • Strong attention to detail and commitment to data quality., • Excellent written and verbal communication skills in English., • Experience reviewing and managing outsourced programming deliverables., • Experience validating or quality controlling customised R packages., • Demonstrated ability to identify process improvements and drive standardisation initiatives., • Ability to work effectively across global, cross-functional teams., • Opportunity to work within a globally recognised Clinical Pharmacology & Pharmacometrics function., • Contribute directly to innovative drug development programmes., • Work in a highly collaborative and scientifically driven environment., • Be part of ongoing innovation and standardisation initiatives within pharmacometrics and clinical data science., • Use your expertise to influence best practices and improve the efficiency and quality of pharmacometric deliverables. If you are passionate about leveraging R programming, pharmacometrics, and data quality excellence to support drug development, we'd love to hear from you. Our success depends on the quality of our people. That’s why we’ve made it a priority to build a diverse culture that rewards high performance and nurtures talent. In addition to your competitive salary, ICON offers a range of additional benefits. Our benefits are designed to be competitive within each country and are focused on well-being and work life balance opportunities for you and your family. • Various annual leave entitlements, • A range of health insurance offerings to suit you and your family’s needs., • Competitive retirement planning offerings to maximize savings and plan with confidence for the years ahead., • Global Employee Assistance Programme, LifeWorks, offering 24-hour access to a global network of over 80,000 independent specialized professionals who are there to support you and your family’s well-being., • Life assurance, • Flexible country-specific optional benefits, including childcare vouchers, bike purchase schemes, discounted gym memberships, subsidized travel passes, health assessments, among others. At ICON, inclusion & belonging are fundamental to our culture and values. We’re dedicated to providing an inclusive and accessible environment for all candidates. ICON is committed to providing a workplace free of discrimination and harassment. All qualified applicants will receive equal consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. #J-18808-Ljbffr

Registered Manager: Children's Residential Care Location: Slough, Berkshire (SL2 area / Manor Park) Salary: Up to £65,000 per annum (depending on experience) + Performance Bonus & Annual Incentive Plan Hours: Monday to Friday, 9:00am – 5:00pm (40 hours/week), flexible management presence + shared senior on-call rota Key Benefits include: 36 days annual leave (28 days + 8 bank holidays) | Annual performance bonus | Ofsted inspection bonuses | Birthday bonus | Clinical psychology support (bMindful) | Funded Level 5 support | Modernised property & expansive garden | Dedicated house transport Are you looking for a leadership role where you can shape a brand-new home from the ground up, backed by a market-leading package of up to £65,000 and direct executive partnership? Whether you're an established Registered Manager looking for a well-resourced provider closer to home, or an ambitious senior Deputy Manager ready for the backing to step up to your first Registered Manager post, we want to hear from you. Founded in 2019, our organisation is an established, high-quality residential childcare group across the UK. With thriving residential services and an expanding network of specialised homes, we combine the resources, stability, and structure of an established provider with the warmth, agility, and close-knit feel of a family-run organisation. Our brand-new Manor Park home in Slough is our newest flagship service: a high-specification, fully modernised home registered for up to two young people. Residential children's homes in Slough are exceptionally rare - meaning care managers locally often face lengthy commutes across Berkshire, Buckinghamshire, or into West London. Here, you have the unique opportunity to lead a prestigious, high-resource service right in your local community, supported by a pre-assembled team and clinical backing. Why join the Culina Roc family? Market-Leading Reward: An exceptional package of up to £65,000 per annum, plus Ofsted registration and inspection bonuses, annual incentives, and paid birthday leave. Cut Out the Commute: A rare, high-calibre residential leadership role located right in Slough (Manor Park), offering quick access without the daily motorway grind to neighbouring counties. A Pre-Assembled, Motivated Team: Step into a ready-built staffing structure, including an energetic, experienced Deputy Manager (who loves home cooking and is already designing a garden vegetable patch with the young people!), a dedicated Team Leader, permanent Residential Care Workers, and waking/sleeping night staff. Supportive 2:1 Establishment Ratios: Benefit from high staffing ratios (2:1 care while the home is being established and settled) to ensure safety, emotional security, and calm group dynamics. Comprehensive Clinical Partnership: Work in direct partnership with our dedicated clinical psychology team, bMindful Psychology, embedding trauma-informed PACE practice across the home. Genuine Work-Life Balance: Enjoy 36 days of annual leave, structured weekday hours, and a shared senior on-call rota that protects your personal time. Executive Mentorship: Direct, open-door access to an experienced Responsible Individual bringing over 14 years of children's care experience to support and champion your registration. Ready to apply? Skip to the ‘apply now' button to start your journey with us. Why join our team? We believe children's residential care should feel like a true home from home - built on unconditional positive regard, emotional security, and ambitious futures. We don't believe in managing young people through rigid rules and control; we lead through connection before correction, using trauma-informed PACE principles (Playfulness, Acceptance, Curiosity, Empathy). As a Registered Manager with us, you'll never feel isolated on an island. Our Directors and Responsible Individual maintain a proactive, supportive presence across our homes, ensuring you have the resources, staffing budgets, and executive backing to lead with confidence. We celebrate longevity, invest heavily in internal progression, and ensure our managers are rewarded for care quality, compliance, and team stability. About Our Home: Manor Park, Slough Located in a quiet, attractive residential neighborhood in Manor Park, Slough, the home is a traditional three-bedroom property that has undergone a complete, high-specification interior modernisation. Featuring a bright, welcoming layout with spacious communal living areas, a private manager's office, a modern family kitchen, and comfortable staff facilities, the property boasts a large private rear garden - complete with outdoor play space and plans for a young person's vegetable and kitchen garden. Situated within a vibrant, friendly, and diverse community, the home enjoys immediate access to local parks, amenities, and transport connections. Registered for just two young people, the service is designed to maintain an intimate, therapeutic atmosphere with zero chaotic group dynamics. The Role: What you'll be doing Taking full operational and regulatory ownership of this new two-bed service, you will steer the home through its founding phase, embed high standards of therapeutic care, and maintain ongoing regulatory excellence under the Children's Homes Regulations 2015. Your day-to-day as a Registered Manager will involve: Therapeutic Leadership: Championing a trauma-informed PACE environment, collaborating with bMindful Psychology during monthly consultations, and embedding personalised Behaviour Support Plans. Team Development & Mentorship: Line-managing, supervising, and coaching your Deputy Manager, Team Leader, and residential care staff, fostering an open, reflective, and ambitious team culture. Founding & Regulatory Excellence: Guiding the home through Ofsted registration, overseeing Regulation 44 visits and Regulation 45 quality reviews, and ensuring continuous inspection readiness. Multi-Agency & Community Collaboration: Building strong working partnerships with placing local authorities, social workers, schools, CAMHS, and birth families to champion the best possible outcomes for each young person. Operational & Budgetary Oversight: Managing the home's devolved budget, staffing rotas, and health and safety governance with full administrative backing. Your Experience and Qualifications Essential: The Background: Minimum of 2 years' management experience (at Deputy Manager level or above) within an Ofsted-registered children's residential home within the last 5 years. The Qualifications: Hold the NVQ / Diploma Level 3 in Residential Childcare (or equivalent), and hold or be actively working towards the Level 5 Diploma in Leadership and Management for Residential Childcare (we will fund and mentor you if you are completing this). The Skills: Proven understanding of the Children's Homes Regulations 2015, Quality Standards, and proactive safeguarding procedures. The Logistics: Have the right to work in the UK, and be able to commute reliably to Slough on a daily basis. Commitment & Values: A consistent career history, genuine child advocacy, and the professional commitment to build a long-term home and culture. Desirable: Established experience as an Ofsted Registered Manager with a proven track record of achieving 'Good' or 'Outstanding' inspection ratings. Full completion of the Level 5 Diploma in Leadership and Management for Residential Childcare. Hold a full, valid UK driving licence. Your Package and Perks Salary: Up to £65,000 per annum (depending on experience). Performance & Ofsted Bonuses: Annual performance-related bonus scheme plus dedicated financial recognition awards for successful Ofsted registration and inspection outcomes. Birthday & Holiday Perks: Paid Birthday bonus and celebration allowance. Generous Annual Leave: 36 days per year (28 days annual leave + 8 bank holidays). Clinical Partnership: Dedicated monthly clinical psychology input (bMindful Psychology) supporting team debriefs and bespoke case formulations. Environment & Amenities: Modernised high-spec home, large private garden, allocated house transport, and dedicated private management office. Pension & Wellbeing: Workplace pension scheme, comprehensive employee wellbeing support, and company-funded Level 5 / CPD pathways. Our Interview Process We respect your time and keep our recruitment journey transparent and collaborative: Apply: Submit your CV and screening answers. Stage 1 (Introductory Screening): An informal telephone/video conversation with our Responsible Individual to discuss your experience, leadership approach, and expectations. Stage 2 (Competency & Culture Interview): A face-to-face interview at the home with our Responsible Individual and Company Directors. * Offer: Conditional hiring decision, subject to safer recruitment compliance checks and references. How to Apply If you're ready to bring your leadership, heart, and vision to our Slough service as our founding Registered Manager, we would love to hear from you. Please submit your CV. We are an equal opportunity employer. We celebrate diversity and are strictly committed to safeguarding and promoting the welfare of children; all successful appointments are subject to comprehensive safer recruitment checks, full referencing, and an Enhanced DBS on the Update Service. JBRP1_UKTJ

Experienced Senior Quality Inspector (NDE) needed for a 12-month contract with a leading engineering and manufacturing organization. Focus on non-destructive examination and quality.

The role will involve ensuring aerospace components and processes meet stringent quality, safety and regulatory standards through accurate inspection, reporting and collaboration across engineering and production functions. Document product quality issues / concerns into Quality Concerns and liaise

This is an excellent opportunity for a skilled xdjnayx inspection professional with a strong background in non-destructive examination and quality a. Senior Quality Inspector (NDE) - 12 Month Contract. Senior Quality Inspector (NDE).

Document product quality issues / concerns into Quality Concerns and liaise with relevant. Document Inspection results and outcomes / dispositions by completing detailed reports /. Determine and oversee inspection standards for incoming goods.

Key Responsibilities of the Quality Inspector Goods in Inspection of mechanical and electrical components Using inspection and measurement equipment such as calipers, shadow graphs Following processes and ensuring incoming goods match documents Communicate quality, product, and safety-related inform

The Role – Quality Inspector Produce First Article Inspection Reports (FAIRs), using a CMM to support dimensional inspection. The Ideal Candidate Previous experience in a Quality Inspection role within an engineering or manufacturing environment. Reporting to the Chief Inspector, you will play an

The role involves hands-on inspection of components, interpreting detailed drawings, and ensuring conformance across QA processes in a stable, quality-focused environment. Hudson Shribman is seeking a Quality Inspector/Engineer to join its precision engineering and advanced manufacturing team. Exper

This role will see the successful candidate carry out Fabrication Quality Control Inspection duties to provide support to the Quality & Inspection departments and ensure all work carried out is to the required standards and meets customer specifications. Quality Control Inspector (Fabrication / Avia

You will carry out dimensional and visual inspection of precision components, use CMM inspection equipment, and collaborate with engineering and production to ensure tight tolerances and quality standards are met. GTS Group are seeking an experienced Quality Inspector to join their world‑class eng

A long-established business that specializes in the manufacture of low volume, high quality, tubular and threaded components for various sectors including Aerospace, Oil & Gas and Defense industries and due to impending retirement, are actively hiring for a Quality Inspector. Previous experience and

A well-established manufacturing business in Reading is looking for an experienced Quality Inspector to join their quality team. The ideal candidate should have a strong background in manufacturing and be skilled in using manual inspection tools. The company offers an opportunity to work closely wit

You will perform electrical safety checks, deliver inspection reports, and ensure compliance with regulations. A specialist engineering service provider is seeking an experienced Quality Inspector in Reading, England.

We are currently recruiting on behalf of a well-established manufacturing business in Reading who are looking to add an experienced Quality Inspector to their growing quality team. Proven experience as a Quality Inspector within a manufacturing environment. Experience using manual inspection tools (

The successful candidate will be responsible for carrying out inspection activities throughout the manufacturing process, including first-off, in-process, final and goods-in inspection, while working closely with production to maintain quality and drive continuous improvement. Support the Technical

A Formula One Team in motorsport valley is seeking a Quality Inspector on a contract to support the Composite Materials QC function. You will operate the DCS machine, record results, maintain inspection records, and collaborate with engineers and technicians to resolve issues and drive continuous im

You will use calipers, shadow graphs and standard inspection equipment, report quality concerns, and communicate effectively across the business. The role covers incoming goods inspection of mechanical and electrical components, ensuring documentation matches and that products meet quality standards

Lightning protection systems inspection and testing. C&G 2391/2392 Inspection and Testing certificate. ATEX inspections experience beneficial.

Quality Engineer, Quality Technician, Quality Assurance Inspector, Manufacturing Quality Inspector, or Supplier Quality Engineer. Previous experience in a quality inspection or quality assurance role within a manufacturing environment. Due to continued growth, they are looking for a hands-on quality

The successful candidate will lead the shop-floor inspection team and act as the technical bridge between Quality Management and inspectors, ensuring components meet stringent aerospace standards. Meritus is seeking a Chief Quality Inspector for a permanent role in Basildon, Essex.

A reputable housing association in Central London is seeking a Repairs Inspector to ensure responsive repairs meet quality standards. The role includes diagnosing works, conducting inspections, and managing contractor performance. Candidates should have relevant experience in repairs inspection and

The ideal candidate will have strong mechanical inspection and welding inspection experience and be able to support production quality in a fast-paced manufacturing environment. SQA Services is seeking an Electromechanical Quality Inspector (Level 2) to support a major data center infrastructure pro

You will work within a dedicated Quality Department, using metrology tools, interpret drawings and maintain accurate inspection records, with training provided on CMM usage and ISO 9001:2015. Contek Recruitment Solutions Ltd in the Great Barr area of Birmingham is seeking a Quality Inspector to join

You will carry out incoming, in-process and final inspections, use root-cause analysis to address issues, and help maintain ISO 9001 standards across the site. Hunters 4 Staff are recruiting for an experienced Quality Inspector based in Brownhills, a growing manufacturing business specialising in ma

The ideal candidate will have strong mechanical inspection and welding inspection experience, along with the ability to support production quality activities in a fast-paced manufacturing environment. Verify supplier execution to inspection plans and quality requirements. Experience supporting suppl

Join the Quality team and support audits, calibration records, and continuous improvement while collaborating with Production, Engineering and Quality colleagues to maintain stringent quality levels. Pivotal Recruit is seeking an experienced Quality Inspector for a precision engineering business man

Boeing Sheffield is seeking a Quality professional to review and validate product non-conformances, support disposition types and engineering requirements, and help evaluate quality across processes. Reporting to the Quality Manager, you will apply aerospace knowledge to perform failure analysis, ga

An established advanced manufacturing business near York is looking for an NDT Inspector to join its Quality and Inspection team. Supporting Production and Quality teams to resolve inspection and NDT issues. This is an opportunity to join an established Quality and Inspection function within a techn

NRL Recruitment is seeking a Welding Inspector based in Seascale, Cumbria to support on-site activities and ensure welding, installation and testing meet quality and safety standards on a major project.

As the business continues to invest in its manufacturing capability, they're looking to appoint a Quality Inspector to strengthen their Quality team.