Trabajos quality control inspection en HornchurchCrear alertas

Electrician Job post summary Pay: £45,000.00-£55,000.00 per year Job Description: About the Role We are looking for an experienced Electrician with strong work ethic to join our specialist team. This role is central to supporting our heat pump, air conditioning, and solar engineers and boiler engineers. You will be responsible for electrical installations, fault-finding, and system integrations, ensuring high-quality service delivery across both traditional heating systems and renewable technologies. Key Responsibilities Carry out electrical installations, testing, and maintenance related to heating and renewable energy systems. Work closely with boiler, AC, heat pump, and solar engineers to provide electrical support. Plus if able to Install and configure heating controls, If not training will be supplied. including: Training supplied to wire Spurs, thermostats, S-plan, Y-plan, and full system wiring. Assist with electrical supplies and connections for: Electric boilers (liaising with suppliers and ensuring correct installs). Air conditioning units. Heat pumps. Solar PV systems (desirable but not essential). Diagnose and resolve electrical and control faults quickly and effectively. Ensure all work complies with BS 7671 (18th Edition Wiring Regulations) and relevant safety standards. Maintain accurate job documentation and communicate clearly with the wider team. Skills & Qualifications • NVQ Level 3 in Electrical Installation or equivalent., • 18th Edition Wiring Regulations certification., • ECS/JIB card (preferred)., • Experience and full competence in wiring, • Familiarity with spurs, thermostats, S-plan, Y-plan, and full system wiring a bonus if not training will be supplied, • Inspection & Testing qualification (2391 or equivalent) desirable., • Knowledge of electrical supplies for boilers, AC, heat pumps, and solar PV systems., • Proven experience working in domestic and/or commercial environments., • Reliable, self-motivated, and proactive., • Able to collaborate effectively with heating, AC, and renewable engineers., • Strong problem-solving ability and keen attention to detail. Competitive salary package. Company vehicle & fuel card (if applicable). Tools, PPE, and uniform provided. Overtime and progression opportunities. Ongoing training in renewable technologies. Job Type: Full-time Benefits: Company car Employee mentoring programme Work Location: On the road

CNC Programmer / Setter / Operator (Fast Make – Milling or Turning) Precision Engineering | Romford This is a role for a machinist who enjoys the full lifecycle of manufacturing — not just running parts, but owning the process from concept through to production. Working within a fast-paced “fast make” environment, you’ll be responsible for developing and proving out new components, programming multi-axis machines, and ensuring parts are delivered right first time. The Role You’ll act as a key link between engineering and production, taking ownership of how new components are manufactured and brought into production efficiently and accurately. Key Responsibilities • Develop robust manufacturing methods for new and complex components, • Generate CNC programmes for 3, 4, and 5-axis machines using CAD/CAM software, • Define tooling requirements and create setup sheets and machining strategies, • Prove out programmes on the shop floor and support transition into production, • Take ownership of all supporting process elements including:, • Tooling and work holding, • Gauging and inspection methods, • CNC programme control and configuration, • Ensure projects are delivered within cost targets and timescales, • Troubleshoot machining and process issues, implementing effective solutions, • Work closely with production, quality, and engineering teams to optimise performanceWhat We’re Looking For, • Strong background in precision machining (milling or turning) within a manufacturing environment, • Proven experience in offline CNC programming using CAD/CAM systems (GibbsCAM preferred), • Ability to interpret complex engineering drawings and specifications, • Solid understanding of cutting tools, feeds/speeds, and machining strategies, • Experience with multi-axis machining (3, 4 & 5 axis), • Confident problem solver with the ability to identify root causes and implement fixesDesirable Experience, • Previous work within aerospace or highly regulated industries, • Familiarity with SOLIDWORKS or similar CAD software, • Engineering qualification (Apprenticeship, ONC/HNC/HND or equivalent) To apply for this exclusive opportunity, please submit an up-to-date CV by clicking the Apply button, or contact me directly for a confidential discussion. If you have not been contacted by A1 Personnel within two weeks of submitting your application, please assume that your CV has not been shortlisted on this occasion. A1 Personnel is acting as a specialist recruitment consultancy in relation to this vacancy.

Night Shift Quality Control Inspector Precision Manufacturing | Monday–Thursday | 17:00 – 03:15 If you’re someone who takes real pride in precision and enjoys being the final checkpoint between production and perfection, this night shift QC role offers the autonomy and responsibility to make a genuine impact. Working at the heart of the inspection function, you’ll be trusted to ensure that every component leaving the facility meets exacting standards — from first-off approval through to final verification. The Role – What You’ll Own This isn’t just ticking boxes — you’ll be a key part of safeguarding product integrity across the full manufacturing lifecycle. • Carry out detailed inspection of parts, assemblies, and sub-assemblies against engineering drawings and customer specifications, • Take responsibility for first-off inspection to keep production running efficiently and right-first-time, • Produce and compile First Article Inspection Reports (FAIRs) with full traceability, • Ensure all inspection records are accurate, complete, and audit-ready, • Support goods inward inspection and verify incoming components, • Identify, log, and escalate non-conformances in line with company procedures, • Work closely with production and quality engineering to resolve issues and prevent recurrence, • Contribute to root cause analysis and continuous improvement activity, • Strong experience in precision inspection within a manufacturing environment, • Confident using a range of inspection tools, gauges, and measuring equipment, including CMM, • Ability to read and interpret complex engineering drawings (metric & imperial), • Experience producing or supporting FAIR documentation, • Knowledge of quality standards and inspection processes, • Comfortable working independently on a night shiftDesirable (but not essential), • Aerospace or highly regulated industry experience, • Exposure to ERP/MRP systems (Javelin advantageous) To apply for this exclusive opportunity, please submit an up-to-date CV by clicking the Apply button, or contact me directly for a confidential discussion. If you have not been contacted by A1 Personnel within two weeks of submitting your application, please assume that your CV has not been shortlisted on this occasion. A1 Personnel is acting as a specialist recruitment consultancy in relation to this vacancy

Electrical Supervisor Our client is a growing electrical and mechanical contractor delivering design, installation, and maintenance services across the industrial, commercial, retail, and entertainment sectors throughout Greater London. With over 15 years of experience and a strong reputation for quality and reliability, they are seeking an Electrical Supervisor to support their commercial team. As the Electrical Supervisor, you will be responsible for supervising and coordinating all electrical installation works on site, ensuring projects are delivered safely, efficiently, and in line with project specifications, industry standards, and compliance requirements. The Electrical Supervisor will support the project team by leading operatives and subcontractors, resolving technical issues, and maintaining quality control throughout the project lifecycle. Electrical Supervisor - Position Remuneration • Salary: £65,000 - £70,000 (DOE), • Site-based role, • Full-time, Monday to Friday (8:00am - 5:00pm), • May involve working to tight deadlines during project handovers or tender periods, • Holiday: 20 days annual leave + bank holidays, • Benefits: Access to the company-wide benefits package Electrical Supervisor - Position Overview • Oversee the installation of electrical systems including containment, wiring, distribution boards, lighting, power, fire alarms, and control systems., • Allocate daily tasks to electrical operatives and subcontractors., • Monitor site progress, productivity, and workmanship, escalating issues to the Project Manager where required., • Review electrical drawings, specifications, schematics, and RAMS., • Ensure all electrical installations comply with BS 7671, industry regulations, and project requirements., • Identify technical issues early and work with the project team to resolve them efficiently., • Ensure all works are carried out safely in accordance with company policies and statutory regulations., • Deliver toolbox talks, site inductions, and task briefings., • Conduct routine inspections to identify hazards and ensure corrective actions are implemented., • Check and sign off completed electrical work to ensure quality standards are met., • Assist with testing, inspection, and commissioning processes., • Maintain accurate records of completed works, variations, and defects., • Monitor material levels and report shortages or delivery issues., • Verify deliveries for correctness and quality., • Ensure electrical tools, equipment, and plant are used safely and maintained appropriately., • Maintain clear communication with the project team, operatives, and subcontractors., • Attend site meetings and provide updates on progress, issues, and resource requirements., • Prepare daily or weekly progress reports as required by the Project Manager., • Lead by example to maintain high standards of professionalism, productivity, and safety. Electrical Supervisor - Position Requirements • Proven experience as an Electrical Supervisor or Senior Electrician within the M&E or construction sector., • Strong technical knowledge of electrical building services installations., • Ability to read and interpret electrical drawings and technical documentation., • Excellent leadership and communication skills., • Strong understanding of electrical safety regulations and compliance standards., • Experience coordinating teams and managing subcontractors. Streamline Search is a technical recruitment agency based in Chichester, West Sussex, operating across the United Kingdom. We are acting as a Recruitment Agency in relation to this vacancy. In accordance with GDPR, by applying to this position you are granting us consent to process your data and contact you regarding this application.

Manufacturing Engineer / CNC Programmer Advanced Precision Engineering | Romford This is a role for an engineer who wants more than just programming — it’s about shaping how products are manufactured from the ground up. Joining a highly capable engineering team, you’ll be instrumental in developing machining strategies, introducing new components into production, and driving improvements across manufacturing processes. The Role You’ll operate at the intersection of engineering and production, taking ownership of CNC programming, process development, and tooling design to ensure components are delivered efficiently, accurately, and right first time. Key Responsibilities • Create and optimise CNC programmes for 3, 4, and 5-axis machining, • Develop manufacturing processes and methods for new and existing products, • Design and implement work holding solutions, jigs, and fixtures, • Define and manage all supporting production elements, including:, • Tooling and cutting strategies, • Gauging and inspection methods, • Production routings and process documentation, • Ensure projects are delivered within cost, quality, and time constraints, • Support and enhance process control documentation and standardisation, • Work closely with production teams to ensure smooth introduction of new components, • Contribute to continuous improvement initiatives to increase efficiency and reduce waste, • Keep up to date with emerging manufacturing technologies and identify opportunities for adoptionWhat We’re Looking For, • Strong background in precision manufacturing / CNC machining environments, • Proven experience in offline CNC programming (multi-axis machining essential), • Ability to develop robust, repeatable manufacturing processes, • Experience designing tooling, fixtures, and work holding solutions, • Confident interpreting complex engineering drawings and specifications, • Strong understanding of machining principles, materials, and toolingDesirable Experience, • Background in aerospace or other highly regulated industries, • Experience working within a medium to large manufacturing environment, • Engineering qualification (Apprenticeship, ONC/HNC/HND or equivalent) To apply for this exclusive opportunity, please submit an up-to-date CV by clicking the Apply button, or contact me directly for a confidential discussion. If you have not been contacted by A1 Personnel within two weeks of submitting your application, please assume that your CV has not been shortlisted on this occasion. A1 Personnel is acting as a specialist recruitment consultancy in relation to this vacancy.

Night Shift | Permanent | Competitive Salary Are you detail-driven and passionate about quality assurance in manufacturing?Join a precision engineering team where your inspection skills will help maintain the highest standards in product verification and compliance. The Role As a Quality Control Inspector working night shifts, you’ll be responsible for: • Verifying parts, assemblies, and sub-assemblies against engineering drawings and customer specifications, • Completing inspection records with full traceability, • Supporting production with batch verification and FAIRs (First Article Inspection Reports), • Identifying and escalating non-conformances, • Ability to interpret technical drawings and specifications, • Experience inspecting precision components and using inspection gauges, • Familiarity with CMM operation and sheet metal/fabricated parts, • HND or equivalent qualification, • Strong communication, organisational, and problem-solving skills, • Knowledge of ERP/MRP systems (e.g., Javelin), • Awareness of MSA, NDT, SPC, ISO/ASME standards, • Be part of a skilled and supportive team, • Work on high-spec products in a quality-focused environment

Quality Control Inspector Late Shift. The Late Shift Quality Control Inspector will be responsible for the control and compliance of product within the Quality Control inspection department in accordance with current manufacturing and Quality assurance procedures, engineering drawing and customer r

Quality Control Inspector – Late Shift Romford Full time, permanent Mon – Thu 5pm – 3.15am Salary: £34,000 - £42,000 23 days plus bank holidays (increasing after 5 years’ service) Healthcare – employee contribution scheme Life Assurance (four times salary) Family Friendly working hours (some flexibility possible on start / finish times and shorter working day on Friday) Pension Scheme (Company Contribution 3%) Whirlpool Discount Scheme On-site parking The Late Shift Quality Control Inspector will be responsible for the control and compliance of product within the Quality Control inspection department in accordance with current manufacturing and Quality assurance procedures, engineering drawing and customer requirements. The Quality Control Inspector is responsible for the application of the content of the company Quality Management System which is applicable to product verification. Key responsibilities • Verify the conformity of parts, assemblies and sub-assemblies in line with engineering drawings, the quality management system and any special customer requirements., • Responsible for comprehensive completion and auditable traceability of inspection records., • Support Production with the timely verification of batch first off., • Create and compile First Article Inspection Reports (FAIRs)., • Carry out inspection duties across all areas of the manufacturing and supply chain process as required., • Identify and report non conformance as per the Company procedure., • Ensure compliance with Quality Assurance and HSE policies and procedures at all times., • Highlight and escalate quality concerns to production management and quality engineering., • Support problem solving to drive root cause analysis and preventive action. What the client is looking for? • Proficient with inspection gauges, measuring equipment, and CMM operation, • Interpret technical data, drawings, specifications, and FAIR documentation, • Goods inward inspection experience with finished products/components, • Aerospace experience preferred but not essential, • Precision component inspection ensuring drawing compliance, • Knowledge of Imperial/metric geometrical definitions, • Read and interpret engineering drawings accurately, • Apply industry and quality standards, • ERP/MRP systems experience (Javelin preferred) desirable, • MSA, NDT, SPC, and ISO/ASME awareness desirable

Electrical Supervisor Our client is a growing electrical and mechanical contractor delivering design, installation, and maintenance services across the industrial, commercial, retail, and entertainment sectors throughout Greater London. With over 15 years of experience and a strong reputation for quality and reliability, they are seeking an Electrical Supervisor to support their commercial team. As the Electrical Supervisor, you will be responsible for supervising and coordinating all electrical installation works on site, ensuring projects are delivered safely, efficiently, and in line with project specifications, industry standards, and compliance requirements. The Electrical Supervisor will support the project team by leading operatives and subcontractors, resolving technical issues, and maintaining quality control throughout the project lifecycle. Electrical Supervisor - Position Remuneration Salary: £65,000 - £70,000 (DOE) Site-based role Full-time, Monday to Friday (8:00am - 5:00pm) May involve working to tight deadlines during project handovers or tender periods Holiday: 20 days annual leave + bank holidays Benefits: Access to the company-wide benefits package Electrical Supervisor - Position Overview Oversee the installation of electrical systems including containment, wiring, distribution boards, lighting, power, fire alarms, and control systems. Allocate daily tasks to electrical operatives and subcontractors. Monitor site progress, productivity, and workmanship, escalating issues to the Project Manager where required. Review electrical drawings, specifications, schematics, and RAMS. Ensure all electrical installations comply with BS 7671, industry regulations, and project requirements. Identify technical issues early and work with the project team to resolve them efficiently. Ensure all works are carried out safely in accordance with company policies and statutory regulations. Deliver toolbox talks, site inductions, and task briefings. Conduct routine inspections to identify hazards and ensure corrective actions are implemented. Check and sign off completed electrical work to ensure quality standards are met. Assist with testing, inspection, and commissioning processes. Maintain accurate records of completed works, variations, and defects. Monitor material levels and report shortages or delivery issues. Verify deliveries for correctness and quality. Ensure electrical tools, equipment, and plant are used safely and maintained appropriately. Maintain clear communication with the project team, operatives, and subcontractors. Attend site meetings and provide updates on progress, issues, and resource requirements. Prepare daily or weekly progress reports as required by the Project Manager. Lead by example to maintain high standards of professionalism, productivity, and safety. Electrical Supervisor - Position Requirements Proven experience as an Electrical Supervisor or Senior Electrician within the M&E or construction sector. Strong technical knowledge of electrical building services installations. Ability to read and interpret electrical drawings and technical documentation. Excellent leadership and communication skills. Strong understanding of electrical safety regulations and compliance standards. Experience coordinating teams and managing subcontractors. Streamline Search is a technical recruitment agency based in Chichester, West Sussex, operating across the United Kingdom. We are acting as a Recruitment Agency in relation to this vacancy. In accordance with GDPR, by applying to this position you are granting us consent to process your data and contact you regarding this application

Manufacturing Engineer/CNC Programmer Romford Full time, permanent Salary: £38,000 £52,000 per annum 23 days hol +BH ABOUT THE CLIENT Our client is a leading precision engineering and aerospace manufacturing specialist supplying high-integrity machined components and assemblies. Operating under strict aerospace regulatory frameworks, the business delivers complex machined parts to major aerospace and defence customers, working to AS9100 standards. They combine advanced CNC machining capability with strong engineering, NPI and process-control disciplines, ensuring excellent quality, repeatability and compliance across all product lines. ROLE PURPOSE The Manufacturing Engineer & CNC Programmer will generate CNC programmes for 3-, 4- and 5-axis machining centres while developing and optimising manufacturing processes for new and existing products. The role requires strong manufacturing engineering experience and precision machining knowledge, especially within aerospace environments. You will create tooling plans, inspection requirements, routings, workholding and process documentation to support controlled, efficient and compliant production. A key responsibility is improving workflows, equipment layouts and overall manufacturing efficiency, while ensuring the lowest possible cost without compromising quality. KEY RESPONSIBILITIES & DELIVERABLES CNC Programming & Process Development Prepare CNC programmes from planned processes using CAD/CAM software (GibbsCAM preferred). Develop tool definitions, setup sheets, tooling plans and related documentation. Prove out CNC programmes into production and optimise for efficiency and repeatability. Own all supporting process elements including routings, tooling, gauges, fixtures, test equipment and CNC files. Manufacturing Engineering Determine materials, tooling and methods to meet product specifications at lowest cost. Analyse and plan workflow, space utilisation and equipment layout for efficiency gains. Improve current operations to enhance quality, output and cost performance. Support the development of transparent cost structures and identify cost-reduction opportunities. Ensure all processes comply with the Quality Management System and aerospace requirements (AS9100). Produce process documentation to strengthen process control. Research emerging manufacturing technologies to support long-term business strategy. REQUIRED EXPERIENCE Strong proficiency in CAD/CAM software for 3D model generation and CNC programming (GibbsCAM preferred). Skilled in machine tool selection, cutting tool specification and application. Ability to interpret technical drawings, specifications and engineering documentation. Experience using SOLIDWORKS. Knowledge of precision engineering processes including milling and turning. Prior experience working to AS9100 or similar aerospace standards. Ability to plan workloads and work to deadlines within a fast-paced production environment. QUALIFICATIONS Degree / HNC / HND (or equivalent) in Mechanical, Manufacturing or Aerospace Engineering. Experience in a manufacturing or production engineering role within a precision engineering organisation (aerospace preferred). Trained and qualified in relevant CAD/CAM software systems. PERSONAL CHARACTERISTICS Strong analytical and problem-solving capabilities with rapid containment decision-making. Excellent communication skills across all levels of the organisation. Ability to simplify complex problems and prioritise effectively. High levels of integrity, accountability and ownership. Highly motivated, self-managing and results-driven. Customer-focused approach with a desire to drive continuous improvement. ADDITIONAL / DESIRABLE SKILLS Previous experience using GibbsCAM (or similar CAD/CAM software). Ability to measure, analyse and present capital investment opportunities for new technology. Project management skills advantageous. TPBN1_UKTJ

Manufacturing Engineer/CNC Programmer Romford Full time, permanent Salary: £38,000 – £52,000 per annum ABOUT THE CLIENT Our client is a leading precision engineering and aerospace manufacturing specialist supplying high-integrity machined components and assemblies. Operating under strict aerospace regulatory frameworks, the business delivers complex machined parts to major aerospace and defence customers, working to AS9100 standards. They combine advanced CNC machining capability with strong engineering, NPI and process-control disciplines, ensuring excellent quality, repeatability and compliance across all product lines. ROLE PURPOSE The Manufacturing Engineer & CNC Programmer will generate CNC programmes for 3-, 4- and 5-axis machining centres while developing and optimising manufacturing processes for new and existing products. The role requires strong manufacturing engineering experience and precision machining knowledge, especially within aerospace environments. You will create tooling plans, inspection requirements, routings, workholding and process documentation to support controlled, efficient and compliant production. A key responsibility is improving workflows, equipment layouts and overall manufacturing efficiency, while ensuring the lowest possible cost without compromising quality. KEY RESPONSIBILITIES & DELIVERABLES CNC Programming & Process Development * Prepare CNC programmes from planned processes using CAD/CAM software (GibbsCAM preferred). * Develop tool definitions, setup sheets, tooling plans and related documentation. * Prove out CNC programmes into production and optimise for efficiency and repeatability. * Own all supporting process elements including routings, tooling, gauges, fixtures, test equipment and CNC files. Manufacturing Engineering * Determine materials, tooling and methods to meet product specifications at lowest cost. * Analyse and plan workflow, space utilisation and equipment layout for efficiency gains. * Improve current operations to enhance quality, output and cost performance. * Support the development of transparent cost structures and identify cost-reduction opportunities. * Ensure all processes comply with the Quality Management System and aerospace requirements (AS9100). * Produce process documentation to strengthen process control. * Research emerging manufacturing technologies to support long-term business strategy. REQUIRED EXPERIENCE * Strong proficiency in CAD/CAM software for 3D model generation and CNC programming (GibbsCAM preferred). * Skilled in machine tool selection, cutting tool specification and application. * Ability to interpret technical drawings, specifications and engineering documentation. * Experience using SOLIDWORKS. * Knowledge of precision engineering processes including milling and turning. * Prior experience working to AS9100 or similar aerospace standards. * Ability to plan workloads and work to deadlines within a fast-paced production environment. QUALIFICATIONS * Degree / HNC / HND (or equivalent) in Mechanical, Manufacturing or Aerospace Engineering. * Experience in a manufacturing or production engineering role within a precision engineering organisation (aerospace preferred). * Trained and qualified in relevant CAD/CAM software systems. PERSONAL CHARACTERISTICS * Strong analytical and problem-solving capabilities with rapid containment decision-making. * Excellent communication skills across all levels of the organisation. * Ability to simplify complex problems and prioritise effectively. * High levels of integrity, accountability and ownership. * Highly motivated, self-managing and results-driven. * Customer-focused approach with a desire to drive continuous improvement. ADDITIONAL / DESIRABLE SKILLS * Previous experience using GibbsCAM (or similar CAD/CAM software). * Ability to measure, analyse and present capital investment opportunities for new technology. * Project management skills advantageous

Youll work closely with engineering and quality teams on-site, supporting continuous improvement initiatives and maintaining high inspection standards. In this key role, youll ensure all materials meet defined specifications, contributing directly to the quality and reliability of products delivered

Are you passionate about vehicle quality, problem-solving, and making sure every product that leaves the line is something to be proud of? Join a fast-growing automotive manufacturer known for its craftsmanship, innovation, and commitment to excellence. As a Quality Inspector, youll play a crucial r

Key Responsibilities of a Quality Inspector Inspect finished goods and prepare them for dispatch Carry out in-process inspections Support production with work-in-progress (WIP) and intermediate inspections Assist with quality investigations and root cause analysis Support inspection of materials re

The quality inspector duties will include: Checking manufactured goods against drawings to include dimensions and materials Checking incoming raw materials for quality and counts Checking finished goods using measuring equipment Investigate any defaults and escalate accordingly To support 6S activ

Proven experience in quality inspection. Are you passionate about vehicle quality, problem‑solving, and making sure every product that leaves the line is something to be proud of? Join a fast‑growing automotive manufacturer known for its craftsmanship, innovation, and commitment to excellence. A

As Quality Inspector, you’ll be responsible for leading projects from kick-off through to O&M handover, ensuring the highest standards are maintained across safety, quality, and compliance. Quality within renewables, energy infrastructure, or construction. As part of their continued growth, they��

Garment Quality Inspector / Final ExaminerFull Time | 3 Month Contract £12. Per HourMonday - Thursday (7am - 4pm)Friday (7am - 12 Noon) Be part of 240 years of British knitwear excellence</

Glass Inspector - Witham - £12.Full time hours - Temporary to permanentWe are currently recruiting for an experienced Glass Inspector to join a busy manufacturing environment in Witham.This is a full time opportunity with the potential to become permanent for the right candidate, with a p

Looking to build an exciting careerin quality engineering? This is an excellent opportunity to join a growing manufacturing business where youll receive hands-on training, work with advanced inspection equipment, and develop into a skilled Quality Inspector.

Cure Talent are partnered with a medical device manufacturer who are looking to add a Quality Control Inspector to support inspection activities across raw materials, in-process builds and finished medical devices. This is a hands-on role working a 4-day week, Monday to Thursday, 7am to 5pm, within

This is an excellent opportunity for a proven Quality Inspector to work with a world leader in the design and manufacture of precision-engineered products. The company has built a reputation for quality, innovation, and reliability.

Assess services: carry out on‑site inspections and off‑site assessments, review information from users, staff, partners and data to build a clear picture of quality and safety. Lead inspection activity, understand how well a service supports people, use evidence and insight to guide decisions. L

You will conduct site inspections, ensure compliance with contracts, monitor project performance, and collaborate with teams to maintain high-quality service delivery. The ideal candidate should have solid knowledge of building regulations, experience in quality control and strong communication skil

In this role, you will maintain robust quality control, inspect compliance throughout manufacturing, and interpret engineering specifications. A leading aerospace manufacturer in Essex is seeking a detail-driven Mechanical Inspector to ensure that high-spec aerospace components meet rigorous quality

You will perform critical inspections, support airworthiness certifications, and collaborate with engineering and quality teams. The ideal candidate will have experience in the aerospace industry, strong problem-solving skills, and proficiency in using inspection tools.

Weld Inspector to join their Quality Department. You will oversee the inspection of in-house fabrications and ensure compliance with complex specifications.

A recruitment agency is looking for a Quality Inspector to work in Basildon. The role involves inspecting CNC machined parts using manual tools, maintaining quality documentation, and adhering to AS9100 standards. Candidates should have strong attention to detail and experience in mechanical inspect

This role involves building strong relationships with builders and site managers, conducting inspections, and managing risk in construction.

Your role will involve ensuring compliance with quality plans and industry standards, along with conducting inspections in a safety-critical environment. A leading infrastructure company is seeking experienced Welding Inspectors / Field Engineers to join a high-performing Quality Surveillance team o

A local government organization in Greater London seeks a Clerk of Works to oversee major construction projects.This role involves inspecting workmanship, ensuring compliance with safety standards, and providing clear technical advice.The ideal candidate will have experience in housing or constructi

A leading engineering firm in the United Kingdom seeks a Welding Black Hat Inspector to support the Senior Welding Engineer.The role involves coordinating welding procedure qualification records, assisting in technical reviews, and evaluating welding methods.Candidates should be proactive in researc

This role involves packing products to premium standards, conducting quality checks, and ensuring all items meet brand requirements.

The ideal candidate will have competency in visual inspection methods and an understanding of NDT requirements. A leading organization in non-destructive testing is seeking an inspector to ensure adherence to production standards and manage quality records. This role includes performing inspections,

The role involves conducting quality inspections on aerospace and marine parts, ensuring compliance with specifications, and using inspection tools. The ideal candidate has experience in inspection, strong problem-solving skills, and attention to detail. A leading aerospace solutions provider in Sta

A leading housing association in Greater London is seeking a Clerk of Works to oversee on-site activities and ensure quality standards during improvement works. The role requires managing kitchen and bathroom replacements, cyclical maintenance, and investment programmes through detailed inspections

A property and construction consultancy in Greater London is seeking a Clerk of Works to oversee construction site inspections and ensure compliance with building regulations and safety standards.

A leading MEP engineering practice in London is seeking a skilled MEP Guardian/Inspector to enhance the quality of MEP installations. Candidates should have site inspection experience and strong communication skills.

You will ensure quality and safety standards while performing surveillance on construction activities.

A leading recruitment agency in the UK is seeking an experienced Mechanical Quality Inspection Engineer to lead the Quality department. A minimum of 3 years' experience in mechanical inspection and strong knowledge of inspection tools are required. This hands-on role involves managing inspections an