Quality control inspection jobs in CardiffCreate job alerts

Quality Inspector | Quality Control Inspector | QC Inspector \n Pentwyn, Cardiff | Competitive Salary | Full-time | Temporary | On-site \n Introduction \n Acorn by Synergie is recruiting for an experienced Quality Inspector to join a client's site in Pentwyn, Cardiff. \n This is an excellent opportunity for an experienced Quality Inspector, Quality Control Inspector, QC Inspector, Quality Assurance Inspector or Manufacturing Quality Inspector to join a busy manufacturing environment. You'll play a key role in ensuring products, materials and manufacturing processes meet strict quality standards, preventing defective products from reaching customers while supporting continuous improvement, product quality, quality assurance and manufacturing excellence. \n Working closely with production teams and both national and international suppliers, you'll support product inspections, quality control activities, supplier quality, product compliance, corrective actions and continuous improvement initiatives within a high-volume manufacturing environment. \n What We Offer \n\n • \n Competitive salary. \n • \n Temporary position with the potential to become permanent. \n • \n Supportive team environment. \n • \n Career development opportunities. \n • \n Access to Acorn by Synergie's Employee Assistance Programme (EAP). \n • \n Access to the Acorn Rewards App. \n\n Key Duties \n\n • \n Carry out Incoming Quality Control (IQC) inspections on materials and components. \n • \n Perform Outgoing Quality Control (OQC) inspections before products are released. \n • \n Inspect materials, products and manufacturing processes to ensure compliance with quality standards. \n • \n Liaise with national and international suppliers to resolve quality issues and support corrective and preventive actions (CAPA). \n • \n Support shipment holds, product quarantines and rework activities. \n • \n Assist production within the Deployment area when required. \n • \n Maintain accurate quality inspection records and documentation. \n • \n Support continuous improvement initiatives across the quality and manufacturing teams. \n\n Requirements \n\n • \n Previous experience as a Quality Inspector, Quality Control Inspector, QC Inspector, Quality Assurance Inspector or similar quality inspection role. \n • \n Experience working within a manufacturing, engineering or high-volume production environment. \n • \n Good computer literacy, including Microsoft Office applications (Excel is essential). \n • \n Experience of computer hardware and software would be advantageous. \n • \n Excellent attention to detail and problem-solving skills. \n • \n Strong communication skills with the ability to work effectively with suppliers and internal teams. \n • \n Ability to work independently and as part of a team. \n\n Interested? \n If you're an experienced Quality Inspector, Quality Control Inspector, QC Inspector, Quality Assurance Inspector or Manufacturing Quality Inspector looking for your next opportunity in Cardiff, apply today with your up-to-date CV or contact Ceri at Acorn by Synergie Head Office, Newport, for more information. \n Acorn by Synergie acts as an employment business for the supply of temporary workers.

Role: Gas safe and Plumbing Engineer \n Location: South Wales \n Salary: £42,000 – £48,000 DOE \n Hours: Monday – Friday, 8am – 5pm (Full-time, Permanent) \n Our client is seeking an experienced Gas Safe and Plumbing Engineer to join its internal team, delivering domestic refurbishment, property maintenance and insurance reinstatement projects throughout South Wales. \n This is a varied, hands-on role covering plumbing and heating surveys, fault diagnosis, general plumbing repairs, first and second-fix installations, boiler and central heating work, bathroom and kitchen plumbing, testing, commissioning and appropriate multi-skilled duties. \n Projects will involve both occupied and vacant residential properties requiring repair or reinstatement following fire, flood, escape of water or accidental damage. You will work across the full project lifecycle, from initial inspection and diagnosis through to installation, certification and handover. \n Gas work must be undertaken strictly within your current Gas Safe registration categories, ACS qualifications and demonstrated competence. \n The successful candidate will also support the company with obtaining and maintaining Gas Safe business registration and associated compliance processes. This may include being listed as an engineer against the company’s registration, subject to Gas Safe Register requirements, and supporting assessments, inspections, certification and record keeping. \n A professional, considerate and customer-focused approach is essential when working in homeowners’ and policyholders’ properties. \n Key responsibilities: \n\n • Undertake plumbing, heating and gas surveys, inspect existing installations, diagnose faults and assess damage caused by insured events. Identify whether systems can be repaired, retained or require replacement, isolate unsafe services where necessary and accurately record findings.\n, • Complete first and second-fix plumbing and heating installations, including hot and cold-water services, heating pipework, soil and waste systems, sanitaryware, radiators, valves, pumps, cylinders, controls and domestic appliances. Install and pressure-test approved pipework systems and rectify defects.\n, • Install, replace, service, repair and commission domestic boilers and heating systems within current Gas Safe categories. Carry out gas tightness testing, purging, appliance testing, heating system flushing, cleaning, dosing and balancing, and inspect flues, ventilation and combustion arrangements.\n, • Complete bathroom, kitchen, shower-room and utility-room plumbing, together with general maintenance and remedial work including leak detection, taps, valves, toilets, wastes and minor pipework alterations. Undertake careful strip-out, refitting and minor making-good where competent.\n, • Coordinate works with project managers and other trades, review scopes, identify materials and report variations or discrepancies. Test and commission completed works, maintain accurate records and certificates, and explain completed systems to customers.\n, • Support Gas Safe business registration and compliance, including assessments, inspections, certification, record keeping, quality control and Building Regulations notifications. Ensure all gas work remains within the applicable registration categories and qualifications.\n\n Essential Qualifications and Experience: \n\n • Current Gas Safe registration and valid Gas Safe ID card, covering the domestic gas categories required, with current ACS qualifications.\n, • Recognised plumbing or domestic heating qualification, apprenticeship, NVQ or equivalent.\n, • Strong experience in domestic plumbing and heating, including boiler installation, servicing, repair, fault finding, central heating, first and second-fix plumbing, bathrooms, kitchens and general maintenance.\n, • Competence in testing, commissioning and completing gas safety and installation documentation.\n, • Good knowledge of gas safety requirements, Building Regulations and water regulations, with the ability to interpret drawings, specifications and manufacturers’ instructions.\n, • Ability to identify unsafe conditions and follow appropriate isolation, reporting and escalation procedures.\n, • High standard of workmanship, strong diagnostic ability and practical multi-skilled capability.\n, • Full UK driving licence and willingness to travel throughout South Wales.\n, • Willingness to support the company with obtaining and maintaining Gas Safe business registration.\n\n Desirable: \n\n • Level 3 Plumbing and Domestic Heating qualification or equivalent.\n, • Unvented hot-water qualification and additional LPG, cooker, fire or appliance categories.\n, • Manufacturer boiler/heating accreditation or experience with modern energy-efficient systems, smart controls and zoning.\n, • Experience in residential refurbishment, property maintenance or insurance reinstatement, particularly following fire, flood or escape of water.\n, • Experience managing projects from survey to completion and preparing reports, scopes, estimates and material schedules.\n, • Asbestos awareness training and experience with Gas Safe business registration and compliance procedures.\n\n Skills and Attributes: \n The successful candidate will have excellent plumbing, heating and gas diagnostic skills, a strong commitment to safety and quality, and a professional customer-focused approach. You will be organised, reliable and adaptable, able to manage your workload, work independently or alongside other trades, and communicate technical information clearly to customers. \n You must be respectful when working in occupied homes and willing to undertake reasonable multi-skilled duties within your competence, while recognising when specialist expertise, additional authorisation or certification is required. \n

\n \n Are you a qualified Chef looking to work with fresh seasonal food, with the opportunity to have more of a work life balance and make what you do matter? \n Working as a Second Chef at Barchester, you will have the chance to deliver hotel/restaurant standards without the split shifts and long weeks. You will assist the Head Chef in creating nutritious, flavoursome and well balanced menus whilst working with residents to tailor menus around them. We are proud to deliver person centred hospitality across all our services and look for warm, motivated and passionate chefs who are driven by quality. \n Here at Barchester, we work with an open, honest, supportive approach, where quality of care is at the heart of everything we do. As sector leading healthcare experts, we are proud to have the highest quality ratings across our 224 homes and hospitals across the UK. \n Barchester have proudly been awarded a two-star outstanding rating by Best Companies, ranked 11th in the top 20 Best Health & Social Care Companies to work for and 14th in the Top 25 Best Big Companies to Work For in the UK. \n NEED TO HAVE \n A personable and warm approach with a genuine interest in the wellbeing of residents \n Hold City & Guilds/NVQ/SVQ or equivalent \n A good understanding of nutrition \n Experience of working with fresh seasonal food \n The ability to create a warm and welcoming environment within our home \n Confidence engaging with residents to create appetising and nutritious menus \n Good understanding of HACCP \n NEED TO DO \n Manage the kitchen in the Head Chef's absence \n Assist Head Chef in menu development \n Work with fresh produce to deliver high quality and wholesome dishes cooked at the highest quality and standards \n Create a warm, efficient and fun environment \n Work within budget \n Complete regular audits \n Manage stock control \n REWARDS PACKAGE \n Rewarding Excellence bonus, meaning you will be financially rewarded by up to £500* for a Good or Outstanding CQC inspection \n Unlimited access to our generous refer a friend scheme, earning up to £500* per referral \n Access to a wide range of retail and leisure discounts at big brands and supermarkets \n Free access to medical specialists, who are available for a second opinion if you need it to make a decision with confidence \n Confidential and free access to counselling and legal services \n Tax code review service, where we will check that you are on the right code and paying the right level of tax \n Option to join our monthly staff lottery alongside thousands of colleagues across the UK \n *Terms & conditions apply \n \n If you are a passionate Chef who is keen to be part of a company that is driven by quality and who love to celebrate life, Barchester is the place to be. \n

Head of Quality \n Cardiff Area - Hybrid \n \n Working with a manufacturing business seeking an experienced Head of Quality to lead and evolve its company-wide quality strategy across a complex, multi-site environment. \n This is a senior leadership role focused on driving operational excellence, maintaining robust compliance standards, and embedding a proactive quality culture across the organisation. \n \n The Role \n Reporting into senior leadership, you will take ownership of the Quality Management System (QMS), lead multi-site quality teams, and ensure ongoing compliance with industry regulations and audit requirements. \n \n You will play a key role in shaping quality strategy, improving business performance, and supporting product and process excellence across the full lifecycle. \n \n Key responsibilities include: \n\n • Developing and delivering the company quality strategy\n, • Leading and developing high-performing QA/QC teams\n, • Managing and improving QMS governance, CAPA processes, change control, and audit readiness\n, • Driving continuous improvement initiatives across operations and engineering\n, • Leading internal and external audits, including customer and regulatory inspections\n, • Partnering with cross-functional teams to ensure compliance across products, systems, and processes\n, • Ensuring quality standards are embedded throughout new product introduction and operational activities\n, • Delivering meaningful KPI reporting and supporting senior management reviews\n, • Building strong relationships with both internal stakeholders and external regulatory bodies\n\n \n What We’re Looking For: \n\n • Proven senior quality leadership experience within a highly regulated environment\n, • Strong understanding of Quality Management Systems and compliance frameworks\n, • Experience leading audit activity and maintaining inspection readiness\n, • Demonstrable success driving continuous improvement and operational quality performance\n, • Strong stakeholder management and leadership capability across multi-site operations\n, • Ability to operate strategically while remaining hands-on when required\n, • Knowledge of regulated manufacturing standards such as ISO frameworks and MDSAP is highly desirable\n\n

Fawkes & Reece are currently recruiting for a temporary, experienced Quality & Assurance Manager to join a leading Cladding & Steel contactors on a major project at Cardiff Bay. This is an excellent opportunity for a quality professional with a strong background in cladding, façades, building envelope or structural steel to take responsibility for quality assurance and quality control across key construction packages. The successful candidate will work closely with the project and site management teams, main contractor, consultants and client to ensure all works are delivered to the required quality standards and in accordance with approved drawings, specifications, manufacturer requirements and relevant industry standards. This role of Q&A Manager is for an immediate start up until mid-2027 and beyond. Key Responsibilities Manage and implement the project's Quality Assurance and Quality Control (QA/QC) procedures. Develop, implement and maintain Inspection & Test Plans (ITPs) for cladding and structural steel activities. Carry out regular site inspections to monitor workmanship, materials and compliance. Ensure construction activities are completed in accordance with approved drawings, specifications and manufacturer requirements. Identify, record and manage Non-Conformance Reports (NCRs), ensuring corrective actions are implemented and closed out. Monitor subcontractors, suppliers and installation teams to ensure required quality standards are consistently maintained. Review material approvals, technical submissions, test certificates and installation records. Maintain comprehensive and accurate quality documentation and inspection records. Work closely with Site Management and Project Management teams to identify and resolve quality issues. Liaise with the client, consultants, main contractor and other project stakeholders on all quality-related matters. Assist with internal and external audits and support compliance with ISO 9001 and project-specific quality management systems. Ensure all required quality documentation is completed and maintained for project handover and close-out. Support continuous improvement across the project, identifying opportunities to improve quality, compliance and installation standards.The Ideal Candidate The successful candidate will ideally have proven experience working within cladding, façade, building envelope or structural steel, together with a strong understanding of construction QA/QC processes. You should have experience working with main contractors, consultants and clients on major commercial or construction projects and be confident managing quality documentation, inspections, audits and non-conformances. Experience with the following would be highly beneficial: ISO 9001 quality management systems and auditing. Inspection & Test Plans (ITPs). Non-Conformance Reports (NCRs). Site inspections and quality audits. Technical submissions and material approvals. Construction drawings and specifications. Manufacturer installation requirements. Structural steel and/or cladding installation. Project handover and quality documentation. Working collaboratively with site and project management teams.Qualifications & Certifications The following qualifications would be advantageous: NVQ Level 6/7 in Construction Management, Quality Management or a related discipline. HNC/HND in Construction, Civil Engineering, Structural Engineering or a related subject. ISO 9001 Internal Auditor or Lead Auditor qualification - highly desirable. CQI (Chartered Quality Institute) qualification or membership - advantageous. CSCS card appropriate to the role. SMSTS - desirable. NEBOSH or IOSH - advantageous but not essential. Recognised QA/QC or Quality Management qualifications. Good knowledge of relevant British Standards, construction regulations and industry specifications.What's on Offer £300-£400 per day, depending on experience. Immediate / ASAP start. Long-term freelance contract with work continuing into 2027. Opportunity to work on a major cladding and structural steel project in Cardiff. Excellent opportunity to work with an established specialist Cladding & Steel contractor. Opportunity to play a key role in maintaining quality standards across a high-profile project.Please apply today with an up-to-date CV and send to Hazel Baron through the website

Accredited meat processing background – raw pet food manufacturing At The Nutriment Company we are entrepreneurs, visionaries and doers. We operate in one of the fastest growing segments of FMCG right now - pet food - and we are proud to be Europe's leading company within the natural premium segment. Our headquarters are in Stockholm and Düsseldorf, and we currently have 850+ employees spread across Europe. We generate 250+ million EUR turnover with strong profitability, and we are owned by the Nordic private equity company Axcel. At The Nutriment Company, we have a highly motivated, ambitious, and fun team that aspires to take our company to the next level, as we expand at pace through both organic growth and acquisitions across Europe. We are now looking for a Head of Production to lead operations at our facilities across the UK. Reporting directly to the Vice President of Operations UK, this is a hands‑on leadership role for someone who has come up through the meat processing industry and understands it from the inside - the hygiene disciplines, the quality systems, the pace, and the cost pressures. You genuinely enjoy getting into the detail while also knowing when to zoom out. You will own the full production picture - planning, efficiency, people, and the ambition to become best‑in‑class operations. Think of it as being the engine room of a fast‑moving, quality‑first business that takes great pride in what it makes • Own the full production operation at Laverstoke Park Farm (our leading UK production site), from raw material intake through to despatch - setting throughput targets, managing shift patterns, and ensuring output meets the demands of a fast‑growing business without compromising on product quality., • Lead all food safety and hygiene programmes across the meat processing operation - including HACCP plans, GMP standards, zoning protocols, and pathogen control - Building to full compliance with BRC, SALSA, and ensuring full compliance with relevant APHA/FSA regulatory requirements for approved raw meat handling establishments., • Drive quality management across the production process - from incoming raw material inspection and supplier specification adherence, through in‑process controls (temperature, weight, contamination), to finished goods release. Own non‑conformance investigation and corrective action processes, and build a quality culture where every person on the floor takes ownership, • Own the site cost base for production - labour efficiency, yield management, waste reduction, and packaging costs. Understand the true cost per kg at each stage of the process and drive continuous improvement in conversion efficiency, • Manage and develop the production team, building capability at every level from team leaders to operatives. Set clear expectations, run structured performance conversations, and create an environment where high standards and accountability are the norm, • Set the tone on health & safety - ensuring the site meets all statutory obligations, conducting regular risk assessments and safety audits, and driving a genuine safety‑first culture. In a meat processing environment this is non‑negotiable, • Align production goals with the broader company strategy, working closely with Supply Chain, Commercial, and Finance leadership to translate business ambition into operational reality. You have built your career in meat processing and you are proud of it. You understand the unique demands of running an approved, accredited site, the hygiene disciplines, the regulatory scrutiny, the pressure to hit yield while maintaining quality and you bring that expertise with authority. You lead from the front, you know how to bring a team through change, and you are as comfortable on the cutting floor as you are presenting to senior leadership. • Substantial hands‑on experience in an accredited meat processing or raw protein manufacturing environment - this is essential, not desirable., • Deep knowledge of food safety and hygiene management in a meat processing context - HACCP development and maintenance, prerequisite programmes, GMP enforcement, pest control, and microbiological monitoring. Experience managing BRC or SALSA audits is expected; experience holding or working towards BRC Higher Level is a strong advantage, • A proven track record of driving efficiency and yield improvement in a protein or raw material processing environment - you understand yield loss by cut or process stage, you know how to measure it properly, and you have a track record of improving it., • Strong commercial and cost management capability - you are comfortable owning a production P&L, tracking cost per unit, managing labour budgets, and making the right trade‑offs between throughput, waste, and quality. You can hold your own in a financial conversation with senior leadership., • Strong grip on production planning in a chilled or frozen raw materials environment - scheduling across multiple lines or shifts, managing raw material intake windows, coordinating with purchasing and supply chain to keep waste and stock risk low, • A natural communicator who can align cross‑functional stakeholders and keep things moving, • Comfortable working in a group structure with multiple business units and a fast‑evolving agenda, • A genuinely impactful role - you will shape how our UK operations run today and for the next chapter, • The backing of a well‑resourced, PE‑backed group with real ambition to be the best in class, • Exposure to senior leadership and a seat at the table when it matters, • Competitive salary and benefits package For questions about the role, please reach out to Head of HR: mette.schneider@nutriment.com #J-18808-Ljbffr

Role: Gas Safe Engineer and Plumber Location: South Wales Salary: £42,000 - £48,000 (DOE) Hours: Monday Friday 8am 5pm (Full Time Permanent) About the Role Our client is seeking an experienced Gas Safe registered engineer and plumber to join its internal team, delivering domestic refurbishment and insurance reinstatement projects throughout South Wales. This is a varied, hands-on position covering plumbing and heating surveys, general plumbing repairs, fault diagnosis, first-fix and second-fix installations, boiler and central heating work, bathroom and kitchen plumbing, testing, commissioning, minor making-good and other reasonable multi-skilled duties. Projects typically involve occupied and vacant residential properties requiring repair or reinstatement following fire, flood, escape of water or accidental damage. The successful candidate will work across the full project lifecycle, from initial inspection and diagnosis through to installation, certification and handover. The role requires a competent engineer who can undertake gas work only within their current Gas Safe registration categories, while also completing high-quality plumbing and heating works in accordance with the relevant regulations, standards and manufacturers instructions. The successful candidate will also assist the company with obtaining and maintaining Gas Safe business registration and the associated certification and compliance processes. They must therefore be willing and able to be listed as an engineer against the companys registration, subject to Gas Safe Register requirements, and to support the companys assessments, inspections, certification, record-keeping and compliance arrangements. As the position involves regular interaction with homeowners and policyholders, excellent communication skills and a professional, considerate approach are essential. Key Responsibilities Surveys, Diagnosis and Technical Assessment Attend occupied and vacant residential properties throughout South Wales to undertake plumbing, heating and gas surveys, inspecting existing installations to establish their condition, safety and serviceability Diagnose faults affecting boilers, central heating systems, hot and cold-water services, sanitary systems and associated controls, while assessing damage caused by fire, flood, escape of water, accidental damage and other insured events Determine whether affected systems and components can be safely retained, repaired or require replacement, identifying any immediate hazards and isolating services where necessary Accurately record findings using photographs, measurements, test results, drawings and clear written reports, together with appropriate recommendations for remedial works and safety measures First and Second Fix Plumbing Undertake first and second fix plumbing installations, including hot and cold-water services, heating pipework, soil and waste systems, sanitaryware, brassware, radiators, valves, appliances and final connections Install, alter and pressure-test copper, plastic and other approved pipework systems in accordance with manufacturers instructions and relevant standards, identifying and rectifying leaks or defects before finishes are applied Coordinate service routes and installation requirements with project managers, site teams and other trades, protecting completed work and ensuring concealed services are accurately recorded before closing up Heating Systems and Gas Work Install, replace, service, repair and commission domestic boilers and associated heating systems, including radiators, valves, pumps, controls, thermostats, cylinders and heating pipework, strictly within the engineers current Gas Safe registration categories and demonstrated competence Carry out heating system flushing, cleaning, dosing and balancing, together with gas tightness testing, purging, appliance testing and commissioning in accordance with current requirements. Inspect flues, ventilation and combustion arrangements and take appropriate action where unsafe conditions are identified Diagnose and rectify faults affecting boilers, heating systems, controls and hot-water systems, completing all required Gas Safe notifications, commissioning records, safety documentation and appliance records Bathrooms, Kitchens and Domestic Refurbishment Complete plumbing installations, repairs and remedial works in bathrooms, shower rooms, cloakrooms, utility rooms and kitchens, including baths, showers, WCs, basins, sinks, taps, wastes, traps, valves and domestic appliances where within scope Set out and install works accurately in accordance with drawings, specifications and manufacturers requirements, coordinating with other trades to achieve a high-quality finish while minimising disruption in occupied properties Remove, refit and replace sanitaryware, radiators, sinks, appliances and associated fittings as required for refurbishment and reinstatement works, including careful strip-out of damaged installations General Plumbing and Multi-Skilled Duties Carry out general plumbing repairs and maintenance, including leak detection, defective valves and taps, toilet faults, wastes, traps and minor pipework alterations, together with draining down, isolation, refilling, venting and recommissioning of domestic water and heating systems Undertake associated multi-skilled duties where competent, including minor sealing, fixing, boxing-in preparation and making-good, leaving work areas safe, secure, tidy and ready for subsequent trades Measure work areas, identify suitable replacement components and prepare material requirements, supporting other trades with access, service isolation and coordinated reinstatement while recognising when specialist expertise, authorisation or certification is required Testing, Certification and Handover Test, commission and certify completed installations within the engineers competence and current registration categories, ensuring all works are safe, compliant, fully operational and ready for handover Maintain accurate job records, photographs, test results, commissioning sheets, certificates and handover information, clearly demonstrating completed systems and controls to homeowners and policyholders Review approved scopes, identify required materials and components, and report any omissions, discrepancies or variations before additional work is undertaken Gas Safe Certification, Business Registration and Compliance Responsibilities Support the company in obtaining and maintaining Gas Safe business registration, including providing competence evidence, supporting assessments and inspections, and being listed as an engineer where required and accepted by the Gas Safe Register Help establish and maintain appropriate procedures for gas safety, supervision, certification, Building Regulations notifications, record keeping and quality control, ensuring gas work is undertaken only within the current competence and registration categories of the relevant engineer Assist with gas safety records, commissioning documentation, compliance certificates and customer handover documentation, while supporting the review of gas-related work, addressing any safety concerns or non-conformities, maintaining required records and keeping up to date with relevant regulatory and Gas Safe requirements Essential Qualifications and Experience Current Gas Safe registration and valid Gas Safe ID card covering the domestic gas work categories required for the role, supported by current ACS qualifications and a recognised plumbing or domestic heating qualification, apprenticeship, NVQ or equivalent Proven experience in domestic plumbing and heating, including boiler installation, servicing and repair, fault finding, first and second-fix plumbing, bathroom and kitchen installations, leak detection, sanitaryware, waste systems, testing, commissioning and completion of relevant gas safety and installation documentation Strong knowledge of applicable gas safety requirements, Building Regulations and water regulations, with the ability to interpret drawings, specifications and manufacturers instructions, identify unsafe situations and follow appropriate isolation and reporting procedures. A high standard of workmanship, sound diagnostic skills and practical multi-skilled ability are essential, together with a full UK driving licence and willingness to travel throughout South Wales Previous experience supporting a Gas Safe registered business, or demonstrable competence and willingness to assist with obtaining and maintaining Gas Safe business registration and associated compliance requirements Desirable Qualifications and Experience Level 3 Plumbing and Domestic Heating qualification or equivalent, together with an appropriate unvented hot-water qualification and additional LPG, cooker, fire or appliance categories where relevant. Manufacturer training or accreditation for commonly installed boiler and heating products would also be advantageous Experience in residential refurbishment, property maintenance or insurance reinstatement, including assessing plumbing and heating systems affected by fire, flood or escape of water. Experience with smart heating controls, system zoning and modern energy-efficient heating systems would be beneficial Experience managing domestic projects independently from survey through to completion, including preparing technical reports, scopes, estimates and material schedules. Asbestos awareness training and experience establishing or maintaining Gas Safe business registration and compliance procedures would also be advantageous Skills and Attributes Excellent plumbing, heating and gas diagnostic ability, with a high standard of workmanship, attention to detail and a strong commitment to gas safety, regulatory compliance and quality Professional, customer-focused and considerate approach, with the ability to explain technical findings and system operation clearly to homeowners and other stakeholders, particularly when working in occupied properties Highly organised, reliable and adaptable, with the ability to manage multiple appointments, work independently or as part of a multidisciplinary team, understand approved scopes and variations, and undertake reasonable multi-skilled duties within demonstrated competence TPBN1_UKTJ

Safran is an international high-technology group operating in the fields of aerospace (propulsion, equipment and interiors), space and defense. Its mission is to contribute sustainably to a safer world, where air transport becomes ever more environmentally friendly, comfortable and accessible. Present on every continent, Safran was ranked second in the Aerospace & Defense sector in TIME magazine's ""World's Best Companies 2025"" ranking. With more than one million seats installed across the fleets of the world's leading airlines, Safran Seats is one of the global leaders in passenger, crew, aircraft and helicopter seating, delivering innovative, high value-added solutions. The purpose of this role is to either assess and assure the Supplier and the quality of products and services they provide are compliant with contractual requirements. The post holder will support the rollout of new programmes as well as develop and implement product standards for use between internal quality and external supply chain or to guarantee the compliance of products and services delivered to customers by implementing customer and Safran requirements within the program. Act as a quality interface and represent the Quality department by building and maintaining relationships of trust with customers. Listen to customers' concerns about quality and translate them into requirements, negotiate as effectively as possible with the customer and implement themoperationally within the program. Understand the implicit and explicit quality requirements of other stakeholders, negotiate them as effectively as possible and integrate them operationally within the program. Guarantee quality performance within the program, or to assure the quality of products, throughout the product lifecycle with Safran Seats GB. These individuals will support the product lifecycle quality assurance, through the complete manufacturing process, and take responsibility for ensuring that processes and procedures are in place and adhered to in relation to product quality. The post holder will support the operational throughput of SGB to ensure the required deliverables are completed on time and to the customer's specification and quality standard. HNC / HND in an Engineering Discipline (Essential) Internal Auditor AS9100 trained (Essential) Sound engineering / quality background, with experience of Quality inspection within a manufacturing / engineering industry. (Essential) Proven experience within a Supplier Quality role (Essential for SQA Engineer) Prior experience within the Aerospace industry, preferably interiors. (Desirable) In depth understanding and/or experience in utilising QA Tools such as APQP, PPAP, MSA, SPC, Control Plans, FMEA, Poke Yoke and RCCA (Essential) Excellent knowledge of measuring equipment and general improvement tools (such as Lean, 6 Sigma) (Essential) Demonstrable experience in managing risks related to materials, special processes (Essential) Proficient in quality analysis tools such as 8D SPC, PFMEA, and others. Knowledge of HSE risk management and flight safety risk management

Site Engineer Snowdonia VIP Project Salary: £40,000 - £45,000 We are seeking an experienced Site Engineer to support the delivery of key civil engineering works on the Snowdonia VIP Project, one of the UK's most significant infrastructure and environmental improvement schemes. As part of a highly experienced project team, you will play a vital role in setting out, technical assurance, quality control, and site coordination across a range of civil engineering activities. This role offers the opportunity to contribute to major infrastructure works within a challenging and rewarding environment, ensuring projects are delivered safely, efficiently, and to the highest engineering standards. This is an excellent opportunity for a motivated Site Engineer looking to work on a nationally significant project with long-term career development prospects. Key Responsibilities Carry out setting out and surveying activities for civil, structural, drainage and earthworks packages. Interpret and implement engineering drawings, specifications and technical requirements on site. Support the planning and day-to-day delivery of construction activities, ensuring compliance with project requirements. Monitor site operations to ensure quality standards, programme objectives and productivity targets are achieved. Assist with the coordination of subcontractors, suppliers and site teams. Ensure works are completed in accordance with approved designs, specifications, permits and temporary works requirements. Produce and maintain accurate site records, QA documentation, inspection records, ITPs and as-built information. Identify, manage and resolve technical issues, escalating where appropriate. Conduct inspections and ensure compliance with health, safety, environmental and quality standards. Support short-term planning, progress reporting and programme management activities. Liaise with project management teams, designers, environmental advisors and client representatives to support successful project delivery. Support the implementation of environmental controls and sustainability initiatives within a sensitive national park and protected landscape environment. Requirements Proven experience working as a Site Engineer on major civil engineering or infrastructure projects. Strong background in earthworks, structures, drainage, highways, utilities or heavy civil engineering works. Experience using Leica, Trimble or equivalent surveying equipment. Ability to interpret engineering drawings, specifications and construction methodologies. Understanding of temporary works procedures and their implementation on site. Experience working for Tier 1 contractors or on large-scale infrastructure projects is highly desirable. HNC/HND or Degree in Civil Engineering (or equivalent). Valid CSCS Card (essential). SMSTS or SSSTS qualification desirable. Good working knowledge of quality assurance procedures, ITPs and as-built records. Strong understanding of health, safety and environmental compliance within construction. Excellent communication, organisational and problem-solving skills. Ability to work effectively within a multidisciplinary project team and manage competing priorities. What's on Offer? Salary of £40,000 - £45,000. Opportunity to work on a nationally significant infrastructure project. Exposure to complex and challenging civil engineering works. Career development within a major project environment. Collaborative and supportive project team culture. Interested? Apply now to join a project that is helping shape the future of infrastructure and environmental sustainability in Snowdonia

Job Title: Process Control & Automation (PC&A) Inspector Location: Port Talbot, South Wales, UK Salary: £39,265 + Benefits Permanent | Full time Sector: Manufacturing / Industrial / Process / Steel We are seeking a skilled Process Control & Automation (PC&A) Inspector to join a leading manufacturing operation in Port Talbot. This is an exciting opportunity for an electrically biased engineering professional to play a key role in maintaining and improving the performance of highly automated production equipment within a fast-paced industrial environment. Working within a multidisciplinary engineering team, you'll be responsible for fault diagnosis, inspection, maintenance, and continuous improvement activities across electrical, automation, control, and instrumentation systems. You will act as a key point of contact in ensuring plant reliability, efficiency, and operational performance. Key Responsibilities Diagnose and rectify faults on PLC-controlled systems and plant instrumentation. Maintain and support control, automation, and instrumentation equipment across site. Fault find on AC/DC drives, motors, and electrical control systems. Support planned maintenance and breakdown activities to minimise production downtime. Issue electrical permits when authorised and ensure compliance with site safety procedures. Respond effectively to engineering, operational, quality, and safety issues. Contribute to continuous improvement initiatives aimed at increasing plant reliability and performance. Work collaboratively with operations and engineering teams to deliver maintenance objectives. Support plant upgrades and engineering projects where required. Undertake overtime during planned shutdowns and breakdown situations when business needs dictate. Candidate Requirements Essential Completed a recognised Engineering Apprenticeship. NVQ Level 3 in Electrical Engineering or equivalent qualification. Strong fault-finding and diagnostic skills. Experience working within an industrial or manufacturing environment. Good understanding of electrical systems, motors, drives, and control equipment. Strong commitment to health, safety, and engineering best practices. Ability to work effectively both independently and as part of a team. Excellent problem-solving and communication skills. Desirable PLC programming and fault-finding experience. Instrumentation and control systems experience. HMI development knowledge. Industrial network communication experience. Low Voltage Authorisation. AC and DC drive systems experience. Experience working with furnace systems, gas systems, or heavy industrial processes. What's In It For You? Annual bonus scheme. Annual salary review. Generous holiday allowance. Excellent pension scheme. Free onsite parking. Employee Assistance Programme. Retail and lifestyle discounts. Ongoing training and development opportunities. Long-term career progression within a major industrial operation. Apply Today Hot Rolled Products Port Talbot is the UK's leading supplier of Hot rolled coil, with up to 83,000 Tonnes of slab a week, processed to various thickness and grades for hundreds of different customers all over the world. Steel slab is reduced to coil and either sent direct to customers or for downstream processing through a highly complex and high speed rolling mill. You will be working within the Hot Rolled Products area, providing a complete range of Engineering activities to optimise production in the area. If you're an experienced electrical, controls, automation, or instrumentation professional looking for your next challenge within a highly automated manufacturing environment, we'd love to hear from you. #technicalpartners

Role: Senior Electrical Supervisor Location: South Wales & South West (Cardiff based) Employment: Full Time (Permanent) Mon-Fri 8.30am-5pm Salary: £45,000 - £50,000 DOE About our client Our client is a rapidly growing EV charging and renewable energy specialist delivering domestic and commercial electric vehicle charging infrastructure across the UK. They pride themselves on delivering a high-quality, customer-focused service with industry-leading installation standards, rapid response times, and strong aftercare support. As part of their continued growth, they are looking for an experienced and motivated Senior Electrical Supervisor to join their expanding team. Role Overview The Senior Electrical Supervisor will be responsible for supervising and supporting electrical installation teams across domestic and commercial EV charging projects. The role will involve carrying out installations of commercial projects, testing and inspection, quality control audits, technical support, site surveys and ensuring all work is completed safely and in compliance with current regulations and company standards. Key Responsibilities Management and installation of commercial EV charging projects Supervise and support installation engineers on-site and remotely Carry out electrical testing, inspection, and certification of completed works Ensure all works comply with BS7671, IET Code of Practice for EV Charging Equipment, OZEV requirements and company procedures Conducting site surveys, technical assessments and conveyance reviews where required ensure we are fully compliant Carry out quality control checks and site audits on completed installations, Diagnose electrical faults and provide effective technical solutions Ensure safe working practices are always followed Completely sign off all required certifications, job documentation, photographs and reporting accurately Liaise with customers professionally and deliver exceptional on-site customer service Support training and mentoring junior engineers and subcontractors, Work closely with the operations and scheduling teams to ensure projects are delivered efficiently Carry out site surveys for both domestic and commercial projects, Quote and price jobs accurately, identifying new business opportunities Maximise profitability and electrician utilisation across the team Support the growth of the team in line with wider business growth Use hand tools, power tools, and testing equipment safely and effectively Maintain company standards for workmanship, communication, and customer experience Essential Requirements NVQ Level 3 in Electrical Installation or equivalent 18th Edition Wiring Regulations (BS7671) 2391 or 2392 Inspection & Testing qualification ECS Gold Card Experience installing EV chargers across multiple manufacturers Ability to complete electrical testing and certification independently Experience with commercial EV infrastructure projects Experience using certification and job management software systems Excellent fault-finding and problem-solving skills Strong communication and organisational skills Ability to work independently and as part of a team Full UK Driving Licence High attention to detail and commitment to quality workmanship Desirable Full MCS qualification, Solar PV and Battery storage installation experience, OZEV installer experience, Experience using SafetyCulture or similar safety audit and compliance software, Full DBS check, Experience using ServiceM8 or similar job management systems Benefits Company electric van, EV charger installed at home, EV charging card, Company pension scheme, Annual profit share bonus scheme, Ongoing training and development courses, Career progression opportunities within a growing business, Potential for profit share and directorship opportunity for the right candidate following a 12-month qualifying period, and Company uniform and branded PPE provided TPBN1_UKTJ

Implement, communicate and maintain a quality plan to bring the Companys quality systems and policies into compliance with quality system requirements. Benefits of quality inspector: Monday to Friday Early Finish Friday 38 hours week 23 days annual leave BH Birthday off Wellbeing Day Pension scheme

Key Responsibilities • Carry out shop floor inspections on products and components • Ensure compliance with AS9100, MIL standards, and company procedures • Use measuring equipment to check components are within tolerance • Record inspection results and maintain quality documentation • Rais

The role involves daily inspections and monitoring of quality standards for coatings and surface treatments. Candidates should have a minimum of 2 years' experience and a strong understanding of safety and quality processes.

A leading engineering firm in the UK is seeking a qualified Project Quality Inspector to ensure quality standards in their fully digital manufacturing facility. The role involves extensive travel for inspections and requires strong knowledge of welding and relevant certifications.

James Fisher and Sons plc is seeking a Lead Quality Control Inspector for its Westhill site in Aberdeenshire. You will lead QC inspections across manufacturing, assembly, testing, and supplier quality, ensuring product conformity and regulatory compliance. Reporting to the Quality Manager, you will

The role requires previous quality inspection experience in manufacturing or similar, excellent attention to detail, and the ability to use hand and power tools. PROMAN is recruiting for a Construction Equipment Quality Inspector to join our Stoke-on-Trent team. You will perform visual and functiona

Carry out audits, quality meetings, inspection of suppliers / subcontractors, monitoring of prefabrications or on-site activities. Review and approve the technical documents and quality of the supplier to release the material,. Carry out inspections before, during and after.

This is a key role responsible for leading and coordinating quality control inspection activities across manufacturing, assembly, testing, and supplier quality processes, ensuring the highest standards of product conformity and compliance are consistently achieved. Reporting directly to the Quality

Familiarity with quality systems, inspection documentation and traceability. This Quality Inspector position offers the chance to join a well-established site that values quality, process discipline, and technical capability. Exposure to root cause analysis / quality problem-solving.

Certification in inspection or quality (e. Background in supplier quality or source inspection environments. This role is critical in ensuring that all supplied components and assemblies meet strict quality, engineering, and regulatory standards before final integration.

If you're looking for your next challenge within a world-class manufacturing environment and have experience in quality inspection or quality engineering, we'd love to hear from you. Analyse inspection data and quality metrics. As part of the Quality team, you'll play a key role in ensuring componen

Seeking a Quality Inspector in Southampton/Swanwick for a design and manufacturing business. Responsibilities include inspecting products and ensuring quality standards are met.

Seeking a Quality Inspector to support precision inspection processes, ensure components meet industry standards, and interpret engineering drawings in an aerospace and motorsport manufacturing setting.

A 3 MONTH CONTRACT ROLE opportunity has arisen for an experienced Quality/FAI Inspector in the Derby area.

Provide inspection cover across site where demand dictates, upon request of inspection supervision, working within the parameters laid down in procedures and work instructions relevant to that area and within their competency. Operate Coordinate Measuring Machines (CMMs) and/or specialised inspectio

Keywords: Quality Control Inspector, Manufacturing, CNC Machinery, Measuring Equipment, CMM Machinery, Reading Drawings, Inspecting Drawings, Goods in and out, ISO-9001, Defence, Marine, High Precision, Approving finished products, Measuring Equipment. Are you a Quality Control Inspector or similar

The Quality Inspector will perform mechanical inspection of component parts and manufactured electronic assemblies, prepare First Article Inspection Reports (FAIRs), and support the quality team with investigations and audits.

Quality Inspector role in Larkhall, South Lanarkshire, focusing on setting quality standards, performing checks, and problem-solving to ensure product quality in the automotive industry.

Seeking a Quality Inspector - CNC for a design and manufacturing business in Southampton/Swanwick, Hampshire, with a salary up to £34,000.

Completion of inspection reports and quality documentation. This is a varied position covering the full inspection cycle, from incoming goods through to final inspection. As a Quality Inspector, you will play a key part in ensuring products meet the highest quality standards throughout the manufactu

Seeking a detail-oriented Quality Inspector to ensure systems meet high-quality standards.

Role of a Quality Product Inspector for Eurocell, a leading uPVC product manufacturer.

Junior Quality Inspector (Precision Engineering / CMM). Are you a Junior Quality Inspector, from a precision engineering background, looking to join a specialist manufacturing company that invest in the latest technology?.

The Quality Inspector is responsible for ensuring that components produced are of the best quality and correct to customer specifications. The Quality Department is focused on ensuring that all work produced by the different sections in the company meets the agreed company quality standards and full

At ALPLA, we stand for high-quality plastic packaging throughout the world. Around 22,000 colleagues produce quality packaging for foodstuffs, cosmetics xdjnayx and industrial cleaning brands for many blue chip clients across 182 ALPLA.

Seeking a skilled Quality Inspector for a permanent, full-time role in Redditch, involving manual inspection of precision-machined components with a focus on tight tolerances and quality decisions.

As Sonardyne continues to grow, we're looking for an experienced and detail-focused Quality Inspector to join our Quality Team at our Blackbushe facility in Yateley. Build quality into technology that works beneath the waves.

Clearly defined role focused on goods inwards & stores inspection (not bench/final inspection). Proven goods inwards, incoming inspection, or stores inspection experience within a manufacturing or regulated environment. Complete, maintain, and update accurate inspection and quality records, ensuring

Seeking a Quality Manager / Building Inspector for a construction contractor in the East Midlands.

Seeking a detail-oriented Quality Inspector for a precision engineering business.

Quality Inspector required for a precision engineering company based in Havant. Quality Inspector Position Overview.

You will be rotated between the three quality areas to build up all-round knowledge of the QC procedures across the business. Carry out goods-in inspection for materials and components. The successful candidate will be responsible for ensuring that components are produced to the highest quality, and

Quality Inspector needed for mechanical inspections of machined parts.

Quality Inspector with precision engineering experience sought for an established aerospace and motorsport supplier.

Responsibilities include inspecting materials, documenting results, identifying quality issues, and collaborating with teams for continuous improvement.

Conducts quality inspections and coordination, including goods inwards, repairs, and final assembly.

Quality Engineer/Inspector needed for a manufacturing company in Chorley.