Trabajos site engineer en Bolton - Page 2Crear alertas

An exciting opportunity for an experienced Manufacturing Test Engineer to join our Circuit card assembly Engineering team. This is a fast-paced but friendly and inclusive Manufacturing environment that will challenge you Salary: Circa £45,500 depending on experience Dynamic (hybrid) working: 4 or 5 days per week on-site due to workload classification Security Clearance: British National Only. Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company bonus: Up to £2,500 (based on company performance and will vary year to year) Pension: maximum total (employer and employee) contribution of up to 14% Overtime: opportunity for paid overtime Flexi Leave: Up to 15 additional days Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Facilities: Fantastic site facilities including subsidised meals, free car parking and much more...The opportunity: As part of our continued growth, we are looking for a highly skilled and methodical Electronics Manufacturing Test Engineer to join our Circuit Card Assembly team. In this critical role, you will specialise in diagnosing faults on PCB assemblies down to component level. Your expertise will be crucial in accurately identifying root causes of failure, providing technical reports and supporting the implementation of corrective actions, which in turn will be utilised to improve production yield and ensure programme targets are achieved. You will be working with a small team of dedicated engineers in a fast-paced but friendly and inclusive manufacturing environment. The team has a great mix of people, ranging from apprentices and graduates through to time served experienced engineers, all striving to deliver technical excellence across a number of different missile systems in development and production. Key Responsibilities: Technical Root Cause Analysis:Performing fault diagnosis down to component level on analogue and digital PCB assemblies using a wide range of both automated and manual test equipment including oscilloscopes, multi-meters, signal generators, etc. Test Specification/Instruction Generation:Supporting the introduction of new test facilities by generating test specifications, operator instructions, and maintaining appropriate configuration control. Cross-Functional Collaboration:Serving as a key point of contact, collaborating closely with Manufacturing, Quality, Process, Design Engineers, and other stakeholders to overcome technical challenges and drive product improvements. Design & Development Support:Providing crucial Test Engineering input during the design and development phases, from initial concept through to Production Readiness Reviews.What we're looking for from you: Formal technical Engineering/Craft Apprenticeship to NVQ Level 3/TR23/TR21 AND Formal further education certificate to Level 4 (HNC or equivalent in a relevant subject)OR BEng/BSc in relevant Engineering/Technical Degree Expertise in Electronics Test & Diagnosis:A strong theoretical and practical understanding of electrical/electronic measurement and test principles, test equipment and fault diagnosis techniques for electronic sub-assemblies and PCBs. Engineering Documentation Experience: An ability to interpret detailed schematics, drawings and test related documentation. Test Equipment Experience:Hands-on experience using both manual and automated test equipment, preferably within a defence or similar high-reliability manufacturing environment. Manufacturing Systems Proficiency:Familiarity with enterprise resource planning, manufacturing execution and version control system tools (e.g., SAP, MES, PLM) for logging test activities and generating non-conformance quality reports. Desirable Experience working with RF-based circuitry would be preferable, but is not mandatory.Our company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity, Disability and more... We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDA_UK), Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information. #LI-RM1

Our client, a trusted partner of the UK's Ministry of Defence, is seeking an experienced Manufacturing Engineer with expertise in Assembly and Integration, particularly in circuit card assemblies. Based within the unit and missile assembly manufacturing facility, you will play a key role in ensuring products are built efficiently, on time, and within budget. As a vital member of the Manufacturing Engineering team, you will provide support across multiple projects, contributing to the successful delivery of high-quality manufacturing solutions. Key Responsibilities: Prepare and maintain detailed Manufacturing Instructions to ensure accuracy and clarity. Design, commission, and validate the necessary tooling for production processes. Support industrial validation activities, including FMEA and First Article Inspection (FAI). Diagnose and resolve technical issues encountered during manufacturing. Update route cards to reflect changes resulting from rework activities. Manage configuration control by incorporating design modifications into manufacturing documentation. Assist with the Non-Conformance process, utilising SAP for tracking and resolution. What do you need?: Qualification Requirements: Electrical/Mechanical Engineering / Manufacturing Apprenticeship (Advanced Level or L3 Standard"or" Electrical/Mechanical Engineering / Manufacturing Level 3 academic qualification (ONC, diploma, etc.)"and" Electrical/Mechanical Engineering / Manufacturing Level 3 vocational qualification (NVQ) *Not required if a L3 apprenticeship standard has been achieved (These qualifications must meet the standard to be considered for the role). "or" BEng Degree in a relevant Engineering subject. Skill Requirements: Ability to interpret design drawings and produce precise Manufacturing Build Instructions for both skilled and semi-skilled operators. Proven experience in electronic sub-assembly manufacturing through to full system builds. Knowledge and hands-on experience of assembly processes for small or miniature electro-mechanical actuation systems. Strong team player with the ability to collaborate and contribute effectively within a group environment. Ability to understand and respond to customer requirements. Familiarity with and adherence to company processes and procedures. Excellent communication skills, capable of engaging effectively within the team and across various organisational levels. What happens now? Upon submission of your application, should it meet our selection criteria, you will be contacted via e-mail by one of our talent acquisition specialists to arrange a screening call. This telephone chat is structured to explore a series of questions aimed at matching your competencies and capabilities to the specific demands of the position. Please note, this screening is contingent upon the initial success of your application. Security Clearance: British Citizen or a Dual UK national with British citizenship Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by our clients Security Team. More about the role For more than 70 years, our client has been in a strong partnership with the UK military. They have accomplished numerous milestones in defence engineering and have provided essential defence capabilities to meet the requirements of the armed forces across land, sea, and air. This job is at our client's site in Bolton facility, one of the North West's leading manufacturing sites for at least 25 years. The facility offers showers and bike racks and is near the motorway, with a petrol station outside. Amenities like an onsite canteen. All employees get training and development opportunities. Guidant, Carbon60, Lorien & SRG - The Impellam Group Portfolio are acting as an Employment Business in relation to this vacancy

The Role We are seeking an experienced BMS Commissioning Engineer with strong hands-on expertise in Trend and Tridium (Niagara) systems. The successful candidate will be responsible for the commissioning, testing, optimisation, and handover of BMS installations across a range of commercial and/or industrial projects. This role requires a proactive engineer who can work independently on site, liaise effectively with project teams and clients, and ensure systems are delivered to specification, on time, and to a high standard. Key Responsibilities Commission BMS systems from point-to-point testing through to full system handover Work extensively with Trend and Tridium (Niagara N4) platforms Configure and commission controllers, I/O points, graphics, alarms, and trends Carry out system integration with HVAC plant and third-party systems Perform fault finding, testing, and system optimisation Produce commissioning documentation, test sheets, and as-built records Support witnessing, demonstrations, and client handover/training Work closely with project managers, engineers, subcontractors, and end clients Ensure works are completed in line with specifications, drawings, and industry standards Adhere to site health & safety procedures at all times Essential Skills & Experience Proven experience as a BMS Commissioning Engineer Strong working knowledge of Trend systems Strong working knowledge of Tridium / Niagara (N4) Experience commissioning HVAC control systems Ability to read and interpret control schematics and technical drawings Competent in point-to-point testing and system validation Strong fault-finding and problem-solving skills Good communication and client-facing skills Ability to work independently and manage workload on site Desirable (but not essential) Trend or Tridium certifications Experience with system integration (e.g. Modbus, BACnet, KNX) Previous experience in commercial buildings, healthcare, data centres, or similar environments Electrical or controls engineering background

Graduate Building Services Engineer £(phone number removed) Bolton Office based opportunity Varied UK based and international projects in the Caribbean. This exciting Graduate Building Services opportunity will offer varied projects spanning high-end residential (villas and condos), holiday resorts, commercial, retail and healthcare projects. You will join a market leading Consultancy who specialise in high-end sustainable and innovative builds in coastal areas in the UK and overseas. As a Graduate Building Services Engineer, you will be expected to join an experienced team and you will be trained in mechanical and electrical design for building services. You will complete training courses, learning through design and site visits across the UK and Caribbean to review construction development and liaise with architects, contractors and clients. You will be trained to complete; -Detailed HVAC and mechanical designs using AutoCAD and Revit for bespoke builds, holiday resorts, condos, high-end residential, aviation and healthcare facilities across the UK and Caribbean. -Electrical cabling, lighting, fire protection and emergency lighting design using DIAlux and Relux. -Complete 2D and 3D models, perform heat load calculations, duct sizing, pipe sizing, and equipment selection using relevant software (e.g., Revit, AutoCAD, HAP, IES, Open Buildings or Elite). • Prepare mechanical drawings, schematics, simulations, vertical transportation and technical specifications in accordance with building codes, sustainability goals, and project requirements. -Design to BIM level 2 in accordance with British Standards PAS 1192-5 -Collaborate with architects, plumbing, and structural engineers to ensure coordinated MEP layouts and avoid design clashes. • Attend internal and client meetings to review design issues/queries and align project objectives both in the UK and Caribbean. You will be supported by experienced team members during meetings. -Assist with site visits to monitor installation quality, verify compliance with original designs and highlight issues during construction in the UK and Caribbean when needed. This role is from the office in Bolton for 5 days a week. This exciting role offers international projects and travel (travel expenses covered), free on-site parking, career progression and the chance to be trained in both electrical and mechanical design. As a Graduate Building Services Engineer, you will be expected to have a BSc and/or an MSc in Building Services Engineering and have a keen interest in mechanical and electrical design. You will also be a confident individual who is comfortable liaising with design teams, contractors and clients and who is interested in international travel on occasion. As a Graduate Engineer, you will be keen to learn and develop design skills to complete detailed electrical and HVAC designs for residential, holiday resorts, hotels, high-end residential or leisure complexes and healthcare schemes. You will be expected to work from the office 5 days a week for training purposes and have a valid UK driving licence and a passport for international travel. Free parking is available on site and sponsorship may be provided, following a PSW visa. If this role is of interest to you, please contact Jordanna Morris at Aztrum Recruitment

Job post summary Date posted: 28 November 2024 Pay: Up to £39,000.00 per year Job Description: Please do not apply unless you have a minimum 3 years experience of industrial sheet/ steel fabrications. Also you must live within a commutable distance to Bolton. Salary up to £39k per annum (depending on experience). 4 day week Excellent staff benefits Job Description: Mechanical Design Engineer The purpose of the Mechanical Design Engineer role is to carry out all aspects of mechanical design via production of 3D Models, General Arrangement drawings, and Design for Manufacture output (including Assembly drawings, Fabrication drawings, Bill of Materials’, and As-built drawings) in accordance with company procedure and/ or customer specification. The role is responsible for generating compliant & accurate design output into purchasing, production, and operations. Responsibilities & Duties: Mechanical Design Engineer Produce designs that comply with product assurance limitations, and that fully consider all stages of the product lifecycle (including material limitations, manufacturability, installability, operability etc). Elimination of H&S risks from designs in accordance with CDM regulations. Produce Designer’s Risk Assessment’s for designs as required by project or product, clearly identifying mitigation measures incorporated. Prepare 3D models in Autodesk Inventor to meet project demand, as necessary. Produce 2D drawings from 3D models for customer review/ approval, and internal/ external manufacturing process, in accordance with the Engineering Handbook, and BS 8888. Responsible for ensuring self-prepared drawings/ models/ documents are correct and concise prior to release into SQEP Design checker(s). Work closely with analysis engineers to ensure designs/ models/ drawings developed accurately reflect the theoretical analysis, advising on design issues, and logging changes in accordance with company procedure. Understand the build sequence in design of all output, prior to release into production engineering. Attend Design and/ or Manufacturability reviews, driving the 3D model where appropriate, and communicating design intent to the wider project team. Support continuous improvement initiatives to increase departmental design capabilities and improve efficiency. Contribute to R&D activities as required. Discuss innovative design solutions for bespoke works with peers and superiors. Confirm appropriate door template with Engineering Supervisor or Senior Engineer(s) prior to commencing work, where appropriate. Maximise change capture within the department, ensuring all change is captured on projects. Provide support to the wider project team, liaising with customers as required. Complete adherence to ’ ISO 9001 procedures for engineering department. Responsible for achieving schedule adherence for all actions assigned to individual/ role. Ensure personal objectives are completed in a timely manner, and contribute to overall departmental/ business objectives year-on-year. Submission of timesheets, sickness/ absence/ holiday requests, and 1-2-1 preparation, in accordance with company procedure. Maintain alignment with company values and vision. Any other ad hoc duties as may be required, and as commensurate with the grade of post. Qualifications, Knowledge, Experience & Skills:Mechanical Design Engineer Essential:Mechanical Design Engineer • Either:, • A key requirement is experience in BIM (Building Information Modelling), • Minimum HND in Engineering, plus 5 years’ experience of industrial sheet/ steel fabrications OR;, • Minimum Bachelor’s degree (BEng Hons) in Engineering (preferably Mechanical Engineering) plus 3 years’ experience of industrial sheet/ steel fabrications., • Ability to use Autodesk 3D Inventor, AutoCAD, and Autodesk Vault unaided., • Understanding of steel manufacturing techniques and limitations (incl. press brake)., • Understanding of load paths, failure modes, and operating limits of steel structures/ components., • A focus on quality adherence and timely output., • Evidence a working knowledge of BS 8888 for engineering drawings., • Ability to compile coherent Designer’s Risk Assessments., • Flexibility to work overtime to achieve project plan as required., • Strong communicator with internal and external customers alike. Desirable:Mechanical Design Engineer • Awareness of door performance testing standards and guides., • Understanding of drive and control systems operating principals., • Knowledge of welding types, strengths, and limitations., • Understanding of tolerance stacking, and the practical application of tolerances., • Ability to programme templates using iLogic/ VB., • Hold valid SC clearance, or hold the ability to obtain it. Job Type: Full-time Benefits: Company pension Free parking On-site parking

Multi Skilled Maintenance Engineer Bury Days role, Monday to Friday Competitive salary - please get in touch for more information 8% Pension, Healthcare , Holidays, Life Assurance, Overtime My client, a recognised leader in UK manufacturing, is expanding and looking for driven Maintenance Engineers to join a team that's growing . This is a chance to step into a stable, well‑supported role. With major funding going into new technology, upgraded production lines, and a strengthened engineering function, you'll be part of a business that's building for the future and wants you to grow with it. Role Description Electrical and Mechanical Breakdowns and Repairs PPM, Reactive & Breakdown maintenance on all site machinery Fault Finding on both Electrical and Mechanical Faults Always Adhering to Health & Safety on site Maintenance on a range of medium to heavy industrial machinery Specific onsite training for machinery/processesSkills and Qualifications Time-Served Maintenance Engineering Experience Minimum Level 3 Electrical or Mechanical Engineering qualifications Industrial Engineering Background Fault finding ability both Electrically & Mechanically Motivated to work in a team environmentCompany Information As a business our client is a true market leader within their industry with a strong presence across the UK. With a secure portfolio of clients these roles provide a stable and secure opportunity in the present economic market. In return for your commitment my client offers a stable and secure career for technically motivated engineers. If you feel this is of interest, please click the link to apply If you are interested in this position please click 'apply'. Hunter Selection Limited is a recruitment consultancy with offices UK wide, specialising in permanent & contract roles within Engineering & Manufacturing, IT & Digital, Science & Technology and Service & Sales sectors. Please note as we receive a high level of applications we can only respond to applicants whose skills & qualifications are suitable for this position. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business

Are you currently working as a Maintenance Engineer or Manager, with experience in a Factory/machine maintenance environment? Are you based within a daily commutable distance to Bury? Emeya Recruitment are currently working in partnership with a leading Precision Engineering and Manufacturing business, they are well established and have an enviable reputation working on great projects. They currently have a requirement for a Factory Maintenance Manager, the position is based out of their Manufacturing facility in Bury. Reporting to the Engineering Manager, this Factory Maintenance Manager is a hands on position, you will be responsible for day to day management and implementation of Factory and Building Maintenance. Factory Maintenance Manager Role Responsibilities: • Maintain Production Plant, equipment and facilities., • General day to day to day maintenance of the Factory and office/Buildings., • Preventative and reactive maintenance across factory and office equipment., • General Facilities management duties to ensure health and safety compliance., • Support on both internal and external audits and inspections., • Support the engineering team with continuous improvement activities for long term investment projects and implementation., • Line management maintenance technician and other facilities operatives. Factory Maintenance Manager Requirements: • Experience within a Factory environment and machinery Maintenance., • Experience within general Building maintenance within a busy factory/office environment., • A proactive mindset and can do attitude., • Excellent problem solving skills and attention to detail., • Locally base to Bury and happy to be on site day to day. In return you will receive a generous basic salary and package as well as the chance to work as an integral part of the team in a world class manufacturing facility. For more information on this Factory Maintenance Manager position or if you would like to apply, please contact Dean Parry of Emeya Recruitment, I am available from 8am-7pm Monday to Friday. Key Words: Factory Maintenance Manager jobs Bury, Maintenance Manager vacancies Bury, Facilities Manager jobs

Working: The role offers flexible working but does require engineers on site for 4-5 days per week and is on a secure site where SC clearance is needed. . We have a great opportunity for an Electronics Test Engineer to join the Manufacturing team at one of our major defence clients. . The Manufacturing Test Engineer will be providing technical support to the manufacturing test capability, to ensure programme targets are met to agreed time, cost and quality requirements. . The Manufacturing Test Engineer will be working with a small team of dedicated engineers in a fast-paced but friendly and inclusive manufacturing environment. The team has a great mix of people, ranging from apprentices and graduates through to experienced engineers, all striving to deliver technical excellence across a number of different projects in development and production. - Main Responsibilities; Providing Test Engineering support during Design / Development phases from initial concept through to Production Readiness Review and release to Operations. Supporting Test Facility introduction and ensuring that appropriate configuration control of equipment and facilities is in place prior to use, including generating supporting test specifications and operator instructions. Supporting testing of electrical/electronic sub-assemblies and circuit cards, with diagnosis of production test failures down to component level. Working closely with Operations, the design teams and other stakeholders to overcome any technical challenges. Always aiming to deliver in line with all programme and quality requirements, whilst maintaining Test Engineering functional governance and pursuing continuous improvement. - Skill and Experience; Minimum HNC level of qualification or equivalent in a relevant subject (HND/Degree preferred) plus experience in digital and analogue electronics manufacture and test. A good understanding of electrical/electronic measurement and test principles and test equipment, as well as fault diagnosis techniques for electronic/electro-mechanical sub-assemblies. Experience of using both manual and automated test equipment, preferably in a defence organisation or similar manufacturing environment. Familiar with enterprise resource planning and manufacturing execution system programs (e.g. SAP, MES) for recording test activities and generating non-conformance reports and concessions. The ability to plan and organise own work in order to ensure multiple tasks can be prioritised and delivered against Project objectives. Good verbal and written communication skills, including generation of test specifications, operator instructions and technical reports based on higher-level requirements. Proven analytical and problem solving skills, with strong attention to detail. - Desirable Experience; Experience in the Defence or safety regulated environment would be advantageous Experience in the Naval / Maritime domain would be advantageous. - Even If you feel like you don't meet every qualification, we encourage you to reach out an apply. - Company Benefits; Bonus: Up to £2,500 (based on performance). Up to 21% (based on performance) Pension: Up to 14% total contribution. Parental Leave: Enhanced parental, maternity, and shared parental leave. Flexi Leave: Up to 15 additional days. Facilities: On-site perks like subsidised meals and free parking. Training and Development: Excellent opportunities for career progression and skill development Company Details; The company are a multi-national group, being No 1 in Europe for what they do! With a number of awards and recognitions, with great career progression and opportunities across the business! It's no wonder, they have been among the winners of the annual Glassdoor Employees' Choice Awards, 2022, and most recently receiving three accreditation gold standard awards with Investors in People! "Interesting work. Good work-life balance. Employees made to feel valued." Software Engineer, 5 Dec 2022. *Glassdoor review. "Promotes and believes in a good work/life balance interesting work on most programmes Encourages internal mobility. Offers good development/training opportunities" Principal Systems Engineer, 19 Dec 2022. *Glassdoor review. True advocates of ED&I as an Equal Opportunity Employer! With over 10 Networking groups and communities across the business advocating Equity, Diversity and Inclusion. Enhanced parental leave: Offers up to 26 weeks for maternity, adoption and shared parental leave. Enhancements are available for paternity leave, neonatal leave and fertility testing and treatments

Join MBDA UK Ltd as a Senior Test Engineer and become an integral part of our Manufacturing team. This role presents an outstanding chance to contribute to the testing of our products. By joining us, you will have the opportunity to play a crucial role in upholding the highest standards of quality and reliability for our products. Salary: Circa £45,000 dependent on experience Dynamic (hybrid) working: 4-5 days per week on-site due to workload classification Security Clearance: British Citizen or a Dual UK national with British citizenship Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company bonus: Up to £2,500 (based on company performance and will vary year to year) Pension: maximum total (employer and employee) contribution of up to 14% Overtime: opportunity for paid overtime Flexi Leave: Up to 15 additional days Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave. Enhancements are available for paternity leave, neonatal leave and fertility testing and treatments. Facilities: Fantastic site facilities including subsidised meals, free car parking and much more... Training and Development: Excellent career progression, training and career development opportunitiesThe opportunity: This opportunity is for a Test Engineer to join the Manufacturing team supporting test and diagnostics of electrical/electronic sub-systems and circuit cards during all phases of the product lifecycle. You will be providing technical support to the manufacturing test capability, to ensure programme targets are met to agreed time, cost and quality requirements. Providing Test Engineering support during Design / Development phases from initial concept through to Production Readiness Review and release to Operations. Supporting Test Facility introduction and ensuring that appropriate configuration control of equipment and facilities is in place prior to use, including generating supporting test specifications and operator instructions. Supporting testing of electrical/electronic sub-assemblies and circuit cards, with diagnosis of production test failures down to component level. Working closely with Operations, the design teams and other stakeholders to overcome any technical challenges. Always aiming to deliver in line with all programme and quality requirements, whilst maintaining Test Engineering functional governance and pursuing continuous improvement.You will be working with a small team of dedicated engineers in a fast-paced but friendly and inclusive manufacturing environment. The team has a great mix of people, ranging from apprentices and graduates through to experienced engineers, all striving to deliver technical excellence across a number of different missile systems in development and production. What we're looking for from you: Minimum HNC level of qualification or equivalent in a relevant subject (HND/Degree preferred) plus experience in digital and analogue electronics manufacture and test. A good understanding of electrical/electronic measurement and test principles and test equipment, as well as fault diagnosis techniques for electronic/electro-mechanical sub-assemblies. Experience of using both manual and automated test equipment, preferably in a defence organisation or similar manufacturing environment. Familiar with enterprise resource planning and manufacturing execution system programs (e.g. SAP, MES) for recording test activities and generating non-conformance reports and concessions. The ability to plan and organise own work in order to ensure multiple tasks can be prioritised and delivered against Project objectives. Good verbal and written communication skills, including generation of test specifications, operator instructions and technical reports based on higher-level requirements. Proven analytical and problem solving skills, with strong attention to detail.Our company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity and more... We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDA_UK), Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information. #LI-RM1

Our client is A leading company specialising in the heat treatment of steel & non ferrous parts for the Aerospace and Engineering industries, we are looking for a Maintenance Engineer to join a small team involved in servicing and maintaining a range of heat treatment furnaces and associated plant. The suitable candidate will be required to demonstrate: A strong Multi-Skilled engineering background, experienced and qualified in Electrical and Mechanical Engineering. The ability to carry out preventative maintenance and servicing of plant and equipment; Possess excellent diagnostic skills to diagnose the causes and rectification of breakdowns;Skills/qualifications: Ideally qualified to 18th Edition Wiring Regulations, and working within an industrial environment. General mechanical/maintenance skills; including welding, fabrication, pipe fitting, replacing bearings, transmission systems including pulleys and belts; PLC and Inverter knowledge; Good computer literacy skills; Good communication skills, liaising with client departments; Expected duties to be carried out on site: Working within the Engineering Department to carry out regular servicing and maintenance of thermal processing equipment. Respond to breakdowns to evaluate and rectify plant issues. Complete required documentation for the Engineering System. Follow predefined procedures to ensure continued safe/efficient operation of all equipment. Carry out required training to confidently complete tasks for maintenance activities. Ensure designated tasks are completed within the scheduled time. Assisting with project work such as installation and commissioning of new equipment, plant improvements and upgrades. Monitor stock levels and re-order as required. Respond to breakdown out of hours situations. The company offers: Competitive salary, Contributory company pension scheme: up to 8%. Company Health Scheme, Profit related pay scheme, 24 days holiday per year, plus Bank Holidays, The opportunity for continuous improvement and training. Other skills to consider C&G 2391 Inspection and Testing would be an advantage Welding, Pipe fitting, Vacuum technology, Calibration Computer Aided Design (CAD) Understanding of combustion/burner systems Thermal equipment control systems

Bolton Salary: £35,000 -£57,000 depending on experience Dynamic (hybrid) working: 3 days per week on-site due to workload classification Security Clearance: British Citizen or a Dual UK national with British citizenship Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company bonus: Up to £2,500 (based on company performance and will vary year to year) Pension: maximum total (employer and employee) contribution of up to 14% Overtime: opportunity for paid overtime Flexi Leave: Up to 15 additional days Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Facilities: Fantastic site facilities including subsidised meals, free car parking and much more... Healthcare Cash Plan: The Healthcare Cash Plan benefit provides the option to claim cash back on everyday healthcare expenses such as optical, dental, health and wellbeing and more . The opportunity: An opportunity to join the team delivering MBDAs future anti-ship / deep strike capability integrated in the Maritime domain. This is working as part of the wider Mission Planning & Control team developing future deep strike / anti-ship capability. This is a role which requires good systems engineering skills and an enthusiastic approach to work with scope to expand responsibilities as the programme progresses. This role pushes MBDAs Mission Planning function beyond its traditional areas of interest so provides an exciting opportunity to grow capabilities and develop valuable expertise. The role covers: Working within the team delivering the Maritime Anti-Ship / Deep Strike Mission Planning (Maritime MP) product and engaging with the wider Mission Planning team Supporting the Maritime MP product owner to create the Maritime variant Working across the whole systems engineering lifecycle from requirements elicitation through to testing and delivery Generating and contributing to key engineering artefacts and design reviews Developing design within the systems architecture model Working with software and algorithm functional teams within the programme Opportunity to engage with end users and customersThis role provides the opportunity to contribute to a key strategic defence project, as well as being able to get hands on as the product progresses. What we're looking for from you: We are looking for a Systems Engineer who can actively contribute to the delivery of key milestones and engage with a wide range of stakeholders. Desired skills and experience include: Proactive approach to engineering challenges Systems Engineering capability and experience Good technical problem solving skills Ability to communicate effectively within cross functional teams Appreciation and understanding of working within a MBSE approach Experience with engineering tools and configuration control Experience delivering maritime systems or working within the maritime environment is highly desirable An appreciation of the software development lifecycle.Our company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity, Disability and more... We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDA_UK), Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information. #LI-KF1

Job role: Electrical Maintenance Engineer £50,000 Basic - Overtime Monday - Friday - Day Shift - 8AM - 4PM We have partnered with a leading engineering company, who specialise is producing vital equipment for the FMCG and Manufacturing industries. The main responsibilities of the Electrical Maintenance Engineer will include. • Ensuring all electrical maintenance on industrial machinery, processing, packaging and warehouse equipment is functioning in the correct manner., • Maintaining all equipment on site, such as, conveyors, pumps, motors, gearboxes, valves, PLC controlled equipment. Skills / Experience / Qualifications Required: • NVQ level 3 in an Electrical discipline, • Experience on PLC Systems and Relays., • Electrical maintenance and installation on FMCG, Manufacturing and packaging equipment. If you are interested in this Electrical Engineer vacancy, please submit an up-to-date CV through this advert

Echelon Engineers are recruiting on behalf of our client for a Senior Design Engineer to join their established team in Bolton. This is an incredible opportunity as the company is actively seeking next-generation talent to drive the business forward, offering exceptional career advancement prospects. This full-time, on-site role involves developing engineering designs and technical drawings for fabrication, alongside various mechanical and related engineering tasks. You'll utilise CAD software for product design while collaborating closely with the production team to ensure all designs meet client specifications. The position requires regular interaction with cross-functional teams to support project goals and deliverables, making it perfect for someone looking to gain broad exposure across the business. Why This Role Stands Out: The company is committed to fast-tracking the careers of talented engineers who demonstrate potential and drive. As they look to bring in fresh perspectives to take the organization forward, successful candidates will find themselves with accelerated development opportunities and genuine progression prospects. What We're Looking For: • Strong skills in Design Engineering, • Proficiency in Mechanical Engineering, particularly with rotating equipment, • Experience with CAD software (2D and 3D), • Excellent problem-solving and analytical abilities, • Collaborative approach and strong teamwork skills, • Bachelor's degree in Engineering or related field, • Experience in bulk solids handling and processing equipment (advantageous), • Strong attention to detail with commitment to quality This is more than just an engineering role - it's a gateway to shaping your career with a forward-thinking company that values innovation and invests in its people. Please apply asap to avoid missing out

Are you interested in the industrialisation of a Manufacturing Architecture, inspection and test plan, if so this role may be suitable for you. Salary: Circa £50,000 depending on experience Dynamic (hybrid) working: 3 or 4days per week on-site due to workload classification Security Clearance: British Citizen or a Dual UK national with British citizenship Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company bonus: Up to £2,500 (based on company performance and will vary year to year) Pension: maximum total (employer and employee) contribution of up to 14% Overtime: opportunity for paid overtime Flexi Leave: Up to 15 additional days Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Facilities: Fantastic site facilities including subsidised meals, free car parking and much more...The opportunity: The Principal Manufacturing Engineer - Industrialisation is responsible for developing a manufacturing system and process, alongside the creation of manufacturing and test instructions, FMEA's and Phase Gate reviews, with various technical aspects of Manufacturing. This will involve leading continuous improvement activities, preparation for IVM & VMS certification, risk aversion strategies and efficient non-conformance management methodologies to align with team priorities. The opportunity will also allow you to grow your knowledge within manufacturing as part of development into future opportunities. Industrial Validation, manufacturing architecture and factory of the future principles are some of the work packages that provide stretched objectives for such growth. Develop manufacturing systems and processes in response to the defined Manufacturing Architecture and the Manufacturing, Inspection and Test Plan. Creation and approval of manufacturing and test instruction documentation. Process FMEA and process capability proving. Lead Industrialisation aspects of Product Gate Reviews Oversee obsolescence from a manufacturing Business unit perspective Lead Spiral Development activities for Business unit / Project Lead and support Continuous Improvement initiatives to ensure the area of responsibility is continually developing to improve efficiency. Lead business unit Rate increases requirements. Support the Manufacturing Engineering Manager during the preparation and proving of the Production System for IVM & VMS certification Risk identification and aversion strategies associated with technical definition and manufacturing methodologies. Development, maintain and control technical interfaces to customers, suppliers and collaborators to ensure effective and swift resolution of technical issues. Effective Non-Conformance management and corrective action. Manufacturing focal point at key meetings to report progress of Engineering actions and align team with programme priorities.What we're looking for from you: Degree/HND level of qualifications or equivalent in a relevant subject Experience of the product development lifecycle in an electronics environment. Sound awareness of PLC2. Good Manufacturing knowledge achieved through experience and understanding of industry best practice. Ability to influence across a team of functional professionals. Budgetary management trained.Our company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity, Disability and more... We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDA_UK), Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information. #LI-RM1

Bolton Are you prepared to join an outstanding team that is at the forefront of advanced technology? If you are a driven and experienced engineer looking for a chance to contribute to top-tier Laser Directed Energy Weapon (LDEW) systems, then we have the ideal position for you! Salary: Up to £57,000 depending on experience Dynamic (hybrid) working: 2- 3 days per week on-site due to workload classification Security Clearance: British Citizen or a Dual UK national with British citizenship Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company bonus: Up to £2,500 (based on company performance and will vary year to year) Pension: maximum total (employer and employee) contribution of up to 14% Overtime: opportunity for paid overtime Flexi Leave: Up to 15 additional days Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Facilities: Fantastic site facilities including subsidised meals, free car parking and much more... Healthcare Cash Plan: The Healthcare Cash Plan benefit provides the option to claim cash back on everyday healthcare expenses such as optical, dental, health and wellbeing and more . The Opportunity: The role of the verification and validation lead for the physical domain is to co-ordinate the overall physical functionality, performance and constraints of the DragonFire system with the weapons system team in order to ensure the consistency of the weapon system product with system requirements and project commitments. This includes understanding, communicating and certifying all aspects of the DragonFire Physical Design for all system components, including: Environmental & EMC performance Power utilisation Storage & TransportabilityThe V & V lead will need to co-ordinate the work packages for both internal and external suppliers to develop certification strategies for the physical domain. Working with RMO's and DAs to ensure that DVP's have appropriate coverage. This role will be focused on the physical certification aspects of the systems. Although an understanding of how these sub-systems work will also be required to support product delivery. As an V and V lead, your main responsibilities will be: Provide physical design compliance statements and CM for review at system level Design change impact assessment Log and track defects found during V&V activities, and collaborate with development teams to resolve them. Manage Design Verification Plan and requirements in Application Lifestyle Management Lead the technical progress meetings and milestone reviews with the supplier Understand sub-contractor management both internal and external Understand and contribute to the key activities in the engineering development lifecycle such as design reviews (PDR/DDR/CDR) Manage schedule, cost, quality and performance metrics for assigned work packages Work within a multi-discipline engineering team (e.g. Systems, mechanical, electrical, software etc...) Limit technical risks through application of mitigation strategies Design reconciliation activities associated with design change, including generation of verification and validation strategies Uplift of other regulatory documentation such as CE marking Support uplift of key documentation, such as technical publications Responding to Customer queries with regard to product usage, interpretation of compliance, certification, etc.What we're looking for from you: Knowledge of systems engineering principles, processes and practices Appreciation of requirements engineering at System, Subsystem or Component level Knowledge associated with the design and build of hardware Awareness of test procedures required to verify products and the gathering of evidence to enable certification. Confidence in presenting technical engineering information and promoting decision making Experience of technical report writing and use of configuration management toolsOur company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity, Disability and more... We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDA_UK), Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information. #LI-KF1

Bolton As a data engineer specialising in generative AI ; this role will see you working in a developing international and transversal structure. You will have the responsibility to evaluate, build and maintain data sets for internal customers whilst ensuring they can be maintained. Salary: Circa £45,000 - £55,000 depending on experience Dynamic (hybrid) working: 2-3 days per week on-site due to workload classification Security Clearance: British Citizen Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company bonus: Up to £2,500 (based on company performance and will vary year to year) Pension: maximum total (employer and employee) contribution of up to 14% Overtime: opportunity for paid overtime Flexi Leave: Up to 15 additional days Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Facilities: Fantastic site facilities including subsidised meals, free car parking and much more...The opportunity: The MBDA IM GenAI delivery Office department is looking for an experienced data engineer able to evaluate design, deploy, improve and support MBDA data sets. You will ensure MBDA data pipelines are designed to be resilient, secure and responsive. You will use your data engineering expertise to collaborate with different internal customers regarding their data, ensuring they are optimised and secured for their needs. You will provide your knowledge in data management and data quality to guarantee compliance to MBDA data governance. A key part of this role is keeping up to date with new technology, where you will provide insight on our technology roadmap and deliver cutting edge solutions to our internal customers. What we're looking for from you: SQL technologies skills (e.g. MS SQL, Oracle...) noSQL technologies skills (e.g. MongoDB, InfluxDB, Neo4J...) Data exchange and processing skills (e.g. ETL, ESB, API...) Development (e.g. Python) skills Big data technologies knowledge (e.g. Hadoop stack) Knowledge in NLP (Natural Language Processing) Knowledge in OCR (Object Character Recognition) Knowledge in Generative AI (Artificial Intelligence) would be advantageous Experience in containerisation technologies (e.g. Docker) would be advantageous Knowledge in the industrial and / or defence sector would be advantageousOur company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity and more... We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDA_UK), Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information. #LI-RM1

Group Maintenance Engineer Bury Full-time, Permanent Monday-Thursday, 6am-4pm (four day week) £37,440 -£41,600 per annum A great opportunity for an experienced, hands‑on Maintenance Engineer to take ownership of site maintenance across two manufacturing operations. You'll be the go‑to person for keeping machinery, services and facilities safe, compliant and running smoothly. No direct team-this is an independent, practical role with contractor coordination as needed. The Role: Deliver and manage PPM schedules Respond to breakdowns and minimise downtime Oversee statutory inspections and close out actions Maintain site services (HVAC, compressed air, building fabric, lighting, etc.) Manage and supervise external contractors Track maintenance costs and identify efficiency improvements Provide occasional support to a nearby sister site What You'll Need: Hands-on maintenance experience in a manufacturing/industrial environment Strong mechanical and/or electrical fault-finding skills PPM planning and execution experience Confident working with contractors and enforcing safe systems of work Solid understanding of Health & Safety Basic IT/admin skills for logging work and maintaining records Desirable: Experience in coatings/textiles/laminating, statutory inspections, lean/CI, IOSH certificate. What you'll receive: £37,440 - £41,600 DOE Life assurance Enhanced pension scheme Four day week - every week! Xmas shutdown Enahnced overtime rates Apply today through the advert if this seems like the role for you. Search is an equal opportunities recruiter and we welcome applications from all suitably skilled or qualified applicants, regardless of their race, sex, disability, religion/beliefs, sexual orientation or age

Position: Shift Engineer Location: Bolton, Greater Manchester Salary: £41,253.00 Shift Pattern: Rotating, Monday to Friday - 06:00 - 14:00/14:00 - 22:00 You will be responsible for repairing equipment breakdowns as quickly and effectively as possible to limit the impact on the site's production. Be proactive in continuous improvement and planned maintenance programs for all site equipment and processes. You will have a background in food production/FMCG. Principal Tasks: Identify and rectify as efficiently as possible any faults on the production process in line with current health and safety legislation. Notify the Factory Engineer of the anticipated "downtimes", complete report sheets and record all breakdown details (on task sheets), including time to rectify fault. Carry out planned routine maintenance tasks across the site and rectify any issues found, if time permits. Report any outstanding issues to Factory Engineer for an assessment of consequences and completion plan. Be proactive in the equipment / process continuous improvement programme and be aware of equipment performance trends such as efficiency, quality and waste. Carry out routine equipment installations as required and be involved in or be familiar with any project plans for the installation of new equipment. Responsible for the quality of information recorded in the shift log and effective communication at shift change. This ensures unfinished tasks can be safely completed and the previous shift issues understood. Any changes made to PLC programmes will be backed up and any other changes made to equipment installations or settings must be updated in the required files or manuals. Liaise with the Factory Engineer (Store) using all available information to determine availability of required spares. If the outcome is a non-stock item then the existing ordering procedure should be followed. Out of normal hours the existing stores procedure should be followed and if a part requires ordering it must be reported to the Factory Engineer who will determine the urgency and consequence. All items for refurbishment or that have been repaired must be correctly labelled and stored in the allotted place. Contacting external suppliers / technical support may be required out of normal hours to liaise on problems. As part of the team-working environment assist in educating operators in the mechanical operation of their equipment ensuring that health and safety legislation is complied with. This will allow them to assist with basic maintenance practices and ensure the correct set-up procedures are followed for their equipment. Ensure that Company health and safety standards are complied with and safe working practices are always adopted. Carry out any other reasonable duties suitable to the level and responsibilities of this role as required.About Us We are dedicated to fostering a diverse and inclusive community. In line with our Diversity and Inclusion policy, we welcome applications from all qualified individuals, regardless of age, gender, ethnicity, sexual orientation, or disability. As a Disability Confident Employer, and part of the Nicholas Associates Group, we are committed to supporting candidates with disabilities, and we're happy to discuss flexible working options. We are committed to protecting the privacy of all our candidates and clients. If you choose to apply, your information will be processed in accordance with the Nicholas Associates Group of companies

An opportunity has arisen for an experienced Manufacturing Electronics Engineer to join our manufacturing team in Bolton. Fantastic opportunity to support across all stages of product assembly Salary: Circa £45,000 depending on experience Dynamic (hybrid) working: 5 days per week on-site due to workload classification Security Clearance: British Citizen Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company bonus: Up to £2,500 (based on company performance and will vary year to year) Pension: maximum total (employer and employee) contribution of up to 14% Overtime: opportunity for paid overtime Flexi Leave: Up to 15 additional days Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Facilities: Fantastic site facilities including subsidised meals, free car parking and much more...The opportunity: We are seeking an Electronics Engineer to service Electrical and Electronic Test Equipment, including Special to Type Test Equipment (STTE).The work is extremely varied, interesting and challenging. You will be joining a dynamic and focussed team, responsible for the support of the manufacturing function across all stages of product assembly integration and test. The team are self-motivated and work directly with support functions and engineers across MBDA to resolve routine and non-routine tasks arising within the business. These tasks include supporting routine calibrations, commissioning, drift analysis, fault finding and repair of test equipment. You will be working within an experienced team of Engineers supporting complex test platforms in the manufacture and test of complex missile systems. You will be trained to calibrate and support special to type factory test equipment using a range of technologies, DC to Microwave. Annual reviews assess and plan any future development opportunities and needs to widen your overall engineering knowledge. Teamwork and knowledge sharing is an essential part of the team ethos as is the understanding of workload and throughput achievements. What we're looking for from you: HNC/HND with relevant experience Experience and knowledge in the calibration of test equipment and maintenance of test systems to component level. Able to utilise instructions, handbooks, drawings or specifications to provide technical advice/guidance. Able to use this information to conduct appropriate measurements and repairs down to component level. Good understanding of calibration principles and processes. Able to mentor other or more junior staff when requested by line manager. Able to deal with multiple issues, tasks and priorities concurrently. Analytical and problem solving skills. Good communication skills with the ability to tailor communication to the relevant audience. A good understanding of SAP would be desirable. Experience of working on Environmental Chambers an advantage.Our company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity and more... We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDA_UK), Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information. #LI-RM1

This is a fantastic opportunity for an experienced Test Equipment Design Engineer to join our Production Design Support Team. You will play a leading role in a range of Engineering activities, providing Test Equipment design support to the Manufacturing organization and broadening your expertise in an international environment. An exciting career path awaits! Job Title: Test Equipment Design Engineer, Production Design Support Salary: Circa £48,000 depending on experience Dynamic (hybrid) working: 4-5 days per week on-site due to workload classification Security Clearance: British Citizen or a Dual UK national with British citizenship Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company bonus: Up to £2,500 (based on company performance and will vary year to year) Pension: maximum total (employer and employee) contribution of up to 14% Overtime: opportunity for paid overtime Flexi Leave: Up to 15 additional days Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Facilities: Fantastic site facilities including subsidised meals, free car parking and much more...The opportunity: We have a phenomenal opportunity for an experienced Test Equipment Design Engineer to play a leading role in the support of production activities with Production Design Support (PDS) at our site in Bolton. You will act as an integral interface between our design teams and our manufacturing teams while working alongside other support engineers to provide knowledge and support. The role offers the candidate a true engineering challenge in their core discipline(s), whilst providing scope for personal growth and development in other areas. Working within Production Design Support (PDS) is a highly rewarding role as you not only see designs coming to life in the manufacturing environment but you can help to shape the design of the products and test equipment, delivering support to our customers. What we're looking for from you: Ideally degree qualified (or equivalent industry experience) with experience of designing product/systems and/or providing support to designs through the manufacturing phase of the product lifecycle. Excellent verbal communication, negotiation and influencing skills with the capability to write clear and concise engineering documentation. Experience of working within a multi-disciplinary team, with an awareness of the challenges and opportunities that this may bring. Someone with a passion for innovation and collaboration. Experienced engineer who will be prepared to work autonomously if needed, leading the delivery of your work assignments and actively engaging with stakeholders to ensure successful delivery of your outputs. Solid experience of managing discreet work packages preparing bids, controlling costs and delivering solutions. Investigative skills to be able to find Root Causes of design related issues and propose robust corrective actions. Full Product Lifecycle knowledge or experience Willingness to provide support to and mentor other Engineers and Engineering Technicians.Proven experience in the design of one or more of the following disciplines:- RF and Antenna Design Electrical Architecture Design for Safety and Integrity RF Test and measurement principle knowledgeOur company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity, Disability and more... We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDA_UK), Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information. #LI-SD1

Lead Verification & Validation Engineer Advanced Technology | Defence Systems Salary: Up to £57,000 (DOE) Working pattern: typically 2–3 days on site Security: British citizen or dual UK national (clearance required) The Opportunity We’re partnering with a leading UK defence technology organisation working at the cutting edge of advanced weapon systems. They’re looking for a Lead Verification & Validation Engineer to play a key role in assuring the performance, safety and compliance of a complex, high-profile system. This is a great opportunity for an engineer who enjoys ownership, coordination and influence, rather than deep hands-on design. You’ll sit at the centre of a multidisciplinary engineering team, helping to ensure that what’s been built meets requirements, standards and real-world expectations. What You’ll Be Doing Leading verification and validation activities across physical and environmental aspects of a complex system Coordinating internal teams and external suppliers to deliver certification and compliance evidence Assessing design changes and their impact on performance, safety and compliance Managing verification plans, tracking issues, and supporting resolution through collaboration Supporting key engineering reviews and milestones Contributing to regulatory, certification and customer-facing documentation This role is about assurance, coordination and technical leadership, rather than detailed design work. What We’re Looking For Background in systems, hardware, or engineering assurance roles Understanding of verification, validation, or certification processes Experience working with requirements, test evidence or compliance activities Confident communicator who can engage engineers, suppliers and stakeholders Comfortable working across disciplines (systems, mechanical, electrical, software) If you’ve worked in regulated or safety-critical environments (defence, aerospace, automotive, rail, energy, etc.), that’s a strong plus. What’s On Offer Bonus up to £2,500 (performance-based) Pension contributions up to 14% Paid overtime opportunities Up to 15 additional flexi-leave days Flexible and hybrid working arrangements Enhanced parental and family leave Excellent on-site facilities and subsidised meals Healthcare cash plan covering everyday wellbeing costs

Manufacturing Test Engineer – CCA Copello is recruiting for an experienced Manufacturing Test Engineer to join a high-performing Circuit Card Assembly (CCA) engineering team. This is an exciting opportunity to work within a fast-paced, friendly and inclusive manufacturing environment that will both challenge and develop you. Salary: Circa £45,500 depending on experience Working Pattern: 4 or 5 days per week on-site (due to workload classification) Security Clearance: British National only Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum, and following offer stage, all successful candidates will be required to undergo HMG Basic Personnel Security Standard (BPSS) checks. What’s on offer: Company bonus of up to £2,500 (subject to annual performance) Pension contributions up to a maximum combined total of 14% Paid overtime opportunities Flexi Leave – up to 15 additional days Flexible working arrangements considered where possible Enhanced parental leave, including up to 26 weeks for maternity, adoption and shared parental leave, with additional enhancements for paternity, neonatal leave and fertility treatment Excellent on-site facilities including subsidised meals and free parking The Opportunity: Due to continued growth, our client is seeking a highly skilled and methodical Electronics Manufacturing Test Engineer to join their Circuit Card Assembly team. In this critical role, you will specialise in diagnosing faults on PCB assemblies down to component level. Your expertise will be essential in identifying root causes of failure, producing detailed technical reports, and supporting corrective actions to improve production yield and ensure programme targets are achieved. You will work within a small, dedicated team of engineers in a fast-paced yet supportive environment. The team includes apprentices, graduates and highly experienced engineers, all focused on delivering technical excellence across multiple complex systems in both development and production phases. Key Responsibilities: Technical Root Cause Analysis: Diagnose faults to component level on analogue and digital PCB assemblies using a range of automated and manual test equipment (e.g. oscilloscopes, multimeters, signal generators). Test Specification & Instruction Generation: Support the introduction of new test facilities by generating test specifications, creating operator instructions and maintaining configuration control. Cross-Functional Collaboration: Act as a key technical interface, working closely with Manufacturing, Quality, Process and Design Engineers to resolve technical challenges and drive continuous improvement. Design & Development Support: Provide test engineering input from early concept stages through to Production Readiness Reviews, ensuring robust and efficient test solutions are implemented. What we’re looking for: Qualifications (one of the following): Formal technical Engineering/Craft Apprenticeship to NVQ Level 3/TR23/TR21 and Formal further education to Level 4 (HNC or equivalent in a relevant discipline) OR BEng/BSc in a relevant Engineering or Technical discipline Experience & Skills: Strong theoretical and practical understanding of electronic measurement, test principles and fault diagnosis techniques for electronic sub-assemblies and PCBs Proven experience diagnosing faults to component level Ability to interpret detailed schematics, drawings and test documentation Hands-on experience using manual and automated test equipment, ideally within a defence or other high-reliability manufacturing environment Familiarity with ERP, MES and PLM systems (e.g. SAP) for logging test activity and raising non-conformance reports Experience with RF-based circuitry (desirable but not essential)

This is a fantastic opportunity for an experienced Test Development Engineer, specialising in circuit card electronic test, to join our Test Development team. It is an exciting time as we begin work on a host of challenging, but rewarding projects, from concept design through to series production and full in-service support! Salary: Circa £ 43,000 depending on experience Dynamic (hybrid) working: 3-4 days per week on-site due to workload classification Security Clearance: British Citizen or a Dual UK national with British citizenship Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company bonus: Up to £2,500 (based on company performance and will vary year to year) Pension: maximum total (employer and employee) contribution of up to 14% Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Facilities: Fantastic site facilities including subsidised meals, free car parking and much more...The opportunity: This is a fantastic opportunity for an experienced Test Development Engineer, specialising in Circuit Card electronic test, to join our Test Development team at our Bolton site. Working in an established team as a Test Development Engineer you'll be creating and maintaining small to medium-sized automated test systems. You'll be responsible for the development and implementation of test strategies and, where appropriate, influencing our product through 'Design for Test'. This involves creating test strategy documents, designing Interchangeable Test Adaptors (including both mechanical and electrical elements) and software development of automated test sequences in accordance with a test specification. You'll also have the opportunity to get involved with continuous improvement activities and the development of new technologies What we're looking for from you: Sound understanding of fundamental analogue and digital circuit design. Experience of creating and using technical documentation and Drawings i.e. Schematics, PCB layouts, Engineering Drawings. Significant experience creating Automated Test Equipment. Experience of using NI LabVIEW and/or TestStand preferable. Experience in Boundary Scan / XJTAG preferable. Strong problem solving skills with an exceptional eye for detail. Strong analytical skills and passion for driving continuous improvement, with six sigma experience desirable.Our company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity, Disability and more... We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDA_UK), Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information. #LI-SD1

MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. Salary:Up to £57,000 dependent on experience + bonus + benefits What we can offer you: Company bonus of up to £2,500 (based on company performance and will vary year to year) Pension of maximum total (employer and employee) contribution of up to 14% Paid overtime Up to 15 days flexi leave 25 days annual leave (plus holiday purchase) Possible relocation available Fantastic site facilities, including subsidised meals, free car parking and more Excellent career progression and development opportunitiesHybrid working pattern: Primarily office based (Bolton) with some opportunity for homeworking Want to be part of a successful team working to develop new and innovative seeker solutions to address complex customer requirements? Then keep reading .... The opportunity: An opportunity exists for a Electronic Engineer with broad based skills, including a strong background in RF engineering, to take a key role in the design support of seeker products being produced in our manufacturing facility based at Bolton. The Seeker Division designs and develops state of the art RF and Dual Mode (RF and IR) seekers for use in guided missile programmes. The role requires a high degree of enthusiasm and a determination to work autonomously to support the delivery of products to the right standard and within the required timescales. The role: Acting as a design team representative to interface with the design and manufacturing teams to transition a seeker from the development phase into series manufacture. Work with manufacturing on process and capability issues & support continuous improvement initiatives to maximise production yields. Support non-conformance management, dealing with design queries and advising on non-conformances where appropriate. Support manufacturing with internal and external suppliers. to aide the manufacturing team & ensure continuity of supply. Support obsolescence management by providing recommendations to the design team.What we're looking for from you: We are looking for an Electronic Engineer with the initiative and the determination to investigate and resolve production problems. A broad-based engineering background would be essential to the role and a detailed knowledge of RF assembly and test procedures would be advantageous. The successful applicant will be able to manage their own workload, interact well with both the design and manufacturing teams, work on project changes in a timely manner & maintain the production schedule. The team: The factory based Design Support Team assists with a variety of different seeker projects - no two working days will be the same! The Design Support Team interfaces with both the Stevenage design team & Bolton manufacturing teams, to help with highly technical problem solving. There are also strong relationships with external suppliers who provide sub-assemblies into the seeker build.Our Business: We respect new perspectives and experiences, and we value our collaborative ways of working. We are committed to growing and supporting diversity in our workforce and ensuring everyone has an equal opportunity to reach their potential. We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. We also welcome applicants who are looking for flexible working arrangements. Follow us on LinkedIn (MBDA), Twitter (@MBDAcareers), Instagram (lifeatMBDA_UK) and Glassdoor or visit our MBDA Careers website for more information. Please Note: MBDA UK Limited requires all employees to achieve the required medical and national security clearance for their role. Further restrictions and/or limitations relating to nationality and/or rights to work may also apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. Due to the nature of our business, this particular vacancy requires the applicant as a minimum to be a British Citizen or a Dual UK national with British citizenship and capable of achieving the clearance levels mentioned above. #LI-SF1

Maintenance Engineer Bolton 3 Shift Pattern £48,000 + Bonus A leading global automotive supplier specialising in advanced vehicle components and systems for major OEMs worldwide. Join a world-class team driving the future of automotive manufacturing We are a premier Tier 1 automotive supplier with a strong presence in the UK, delivering innovative, high-quality components to the world's leading vehicle manufacturers. Our Bolton facility is a key high-volume production site focused on precision assembly and testing systems, and we are now seeking an experienced Maintenance Engineer to join our dynamic engineering team. This is a hands-on role ideal for a proactive, skilled tradesperson who thrives in a fast-paced, high-output manufacturing environment. You will play a critical role in maximising equipment uptime, driving continuous improvement, and supporting our commitment to world-class production standards. Responsibilities – Maintenance Engineer Troubleshooting, repair, and maintenance of high-volume PLC-controlled production equipment Planning and performing preventative maintenance on critical assets Improvement and modification of assembly/test equipment and transfer systems Service and maintenance of electrical and mechanical site services/plant Supporting the installation and commissioning of new equipment Experience/Qualifications - Maintenance Engineer Ideally qualified to ONC/HNC level (or equivalent) in Mechanical/Electrical Engineering, supported by City & Guilds Part 3 (or similar) and NVQ Level 2 & 3 Time-served apprenticeship in a relevant engineering discipline Significant hands-on experience (minimum 2+ years) in high-volume manufacturing environments Proven track record in equipment repair, maintenance, and process improvement Experience in fitting, fabrication, and machining is highly advantageous Strong background in maintenance and fault-finding on PLC-controlled and robotic high-volume equipment (ideal but not essential) Solid experience maintaining and diagnosing faults in hydraulic and pneumatic systems Benefits - Maintenance Engineer Discretionary annual Bonus 7.5% up to 5.5% employer contribution EV Scheme: through salary sacrifice and free charging at site Medical Insurance Death in Service: 4 x annual salary For more information on this role, please contact Andy Haddon on (phone number removed), or send a copy of your CV to (url removed) For details of other opportunities available within your chosen field, please visit Omega is an employment agency specialising in opportunities at all levels within the Engineering, Manufacturing, Aerospace, Automotive, Electronics, Defence, Scientific, Energy & Renewables and Tech sectors. Ideal background / Previous roles may include: Maintenance Engineer, Shift Engineer, Shift Technician, Reliability Engineer or field service engineer Omega is an employment agency specialising in opportunities at all levels within the Engineering, Manufacturing, Aerospace, Automotive, Electronics, Defence, Scientific, Energy & Renewables and Tech sectors

Electrical Supervisor (Substations) Bolton £45,000 - £50,000 + Training + Progression + Pension + Great Holiday Package + Health & Wellbeing Benefits Are you an experienced electrical fitter, jointer, or engineer looking to take the next step into a supervisory role? Do you have a background in DNO or IDNO electrical installation works and want to play a key role in delivering substation and MSU projects from cradle to grave? This is a great opportunity to join a growing utilities and infrastructure business, supporting the delivery of electrical works across a range of substation and MSU projects. You will work closely with senior management while being given scope to influence how the role develops over time. The position will involve overseeing electrical works from early planning through to completion, supporting the coordination of resources, and ensuring works are delivered safely, efficiently, and to a high standard. This role would suit an experienced fitter, jointer, or electrical engineer seeking increased responsibility within a project-focused environment. This role offers a clear pathway into a supervisory position within a well-established utilities environment, providing long-term career progression for the right individual. The Role: Support the day-to-day coordination of electrical and jointing resources, including subcontractors Oversee substation installations, inspections, cable terminations and electrical fit-outs Assist with planning, programming and material requirements for works Liaise with clients, contractors, and DNO/IDNO representatives Attend site meetings and manage quality issues through to close-out The Person: Electrical or jointing background within a DNO or IDNO environment Experience working on substation or MSU installations Strong communication and organisational skills Comfortable working to deadlines and managing multiple priorities Competent with Microsoft Office applications A proactive, professional approach with a focus on quality and customer service Reference Number: BBBH(phone number removed) To apply for this role or to be considered for further roles, please click "Apply Now" or contact Nathan Williams at Rise Technical Recruitment. Rise Technical Recruitment Ltd acts as an employment agency for permanent roles and an employment business for temporary roles. The salary advertised is the bracket available for this position. The actual salary paid will be dependent on your level of experience, qualifications, and skill set. We are an equal opportunities employer and welcome applications from all suitable candidates. Rise Technical Recruitment Ltd acts an employment agency for permanent roles and an employment business for temporary roles. The salary advertised is the bracket available for this position. The actual salary paid will be dependent on your level of experience, qualifications and skill set and will be decided by our client, the employer. Rise are not responsible or liable for any hiring decisions made by the end client. We are an equal opportunities company and welcome applications from all suitable candidates

My client, a bespoke MEP and Sustainability Consultancy based in Bolton, is searching for a Mechanical Design Engineer to join their team to work on UK based and international projects across the Caribbean. This is a hybrid role, offering varied projects spanning high-end residential, commercial, retail and healthcare projects. This opportunity is available with a market leading Consultancy who specialise in sustainable and innovative builds in coastal areas. As a Mechanical Design Engineer, you will be expected to join a bespoke design team to complete detailed HVAC, hot and cold water systems, sprinkler systems and mechanical designs using Revit for bespoke builds, holiday resorts, condos, high-end residential, aviation and healthcare facilities across the UK and Caribbean. You will be expected to visit the Caribbean to review sites across the region. Flights and accommodation will be covered by the company. You will also be expected to; -Complete 2D and 3D models, perform heat load calculations, duct sizing, pipe sizing, and equipment selection using relevant software (e.g., Revit, AutoCAD, HAP, IES, Open Buildings or Elite). • Prepare and review mechanical drawings, schematics, simulations, vertical transportation and technical specifications in accordance with building codes, sustainability goals, and project requirements. -Design to BIM level 2 in accordance with British Standards PAS 1192-5 -Collaborate with electrical, plumbing, and structural engineers to ensure coordinated MEP layouts and avoid design clashes. • Attend internal and client meetings to resolve design issues/queries and align project objectives both in the UK and Caribbean. -Review designs submitted by the team and respond to RFIs (Requests for Information). -Site visits to monitor installation quality, verify compliance with original designs and highlight issues during construction in the UK and Caribbean when needed. -Evaluate new materials and designs ensuring energy efficiency and cost-effectiveness. This role is from the office in Bolton on a hybrid basis. This exciting role offers international projects and travel, career progression and the chance to join an experienced team. As a Mechanical Design Engineer, you will be expected to have a BSc and/or an MSc Mechanical Engineering or Building Services Engineering and have experience working for UK and international Consultancy completing detailed HVAC designs, hot and cold water pipe design for residential, holiday resorts, hotels, high-end residential or leisure complexes and healthcare schemes. Design experience for commercial and aviation sectors is also a bonus. You are also required to have a detailed knowledge PAS 1192-5 and other relevant codes and have a keen understanding of BREEAM and net zero. Candidates are required to have a valid UK driving licence to visit sites across the region and a passport for international travel

My client, a bespoke MEP and Sustainability Consultancy based in Bolton, is searching for a Principal Building Services Design Engineer to join their team to work on UK based and international projects across the Caribbean. This is a hybrid role, offering varied projects spanning high-end residential, commercial, retail and healthcare projects. This opportunity is available with a market leading Consultancy who specialise in sustainable and innovative builds in coastal areas. As a Principal Building Services Engineer, you will be expected to manage and mentor the team, check technical designs and complete detailed HVAC and mechanical designs using AutoCAD and Revit for bespoke builds, holiday resorts, condos, high-end residential, aviation and healthcare facilities across the UK and Caribbean. You will be expected to visit the Caribbean to review sites across the region. Flights and accommodation will be covered by the company. You will also be expected to; -Complete 2D and 3D models, perform heat load calculations, duct sizing, pipe sizing, and equipment selection using relevant software (e.g., Revit, AutoCAD, HAP, IES, Open Buildings or Elite). • Prepare and review mechanical drawings, schematics, simulations, vertical transportation and technical specifications in accordance with building codes, sustainability goals, and project requirements. -Design to BIM level 2 in accordance with British Standards PAS 1192-5 -Collaborate with electrical, plumbing, and structural engineers to ensure coordinated MEP layouts and avoid design clashes. • Attend internal and client meetings to resolve design issues/queries and align project objectives both in the UK and Caribbean. -Review designs submitted by the team and respond to RFIs (Requests for Information). -Site visits to monitor installation quality, verify compliance with original designs and highlight issues during construction in the UK and Caribbean when needed. -Evaluate new materials and designs ensuring energy efficiency and cost-effectiveness. This role is from the office in Bolton on a hybrid basis. This exciting role offers international projects and travel, career progression and the chance to manage a team. As a Principal Building Services Engineer, you will be expected to have a BSc and/or an MSc Mechanical Engineering or Building Services Engineering and have experience working for UK and international Consultancy completing detailed HVAC designs, hot and cold water pipe design for residential, holiday resorts, hotels, high-end residential or leisure complexes and healthcare schemes. MEP Design experience is essential and you must have hands-on design experience using Revit and AutoCAD. Design experience for commercial and aviation sectors is also a bonus. You are also required to have a detailed knowledge PAS 1192-5 and other relevant codes and have a keen understanding of BREEAM and net zero. Candidates are required to have a valid UK driving licence to visit sites across the region and a passport for international travel. If this role is of interest, please contact Jordanna Morris at Aztrum

Commissioning Engineer x4 UK Based | UK & International Travel £30,000 - £50,000 + Overtime + Benefits Full Time | Permanent A well-established engineering business is seeking a Commissioning Engineer to join its growing technical team. The company designs and installs specialist process equipment for customers across the UK and Europe. This role combines workshop testing, installation and on-site commissioning, supporting projects from build through to final handover. Key Responsibilities • Supporting system build and testing prior to delivery * Conducting Factory Acceptance Tests (FAT) * Installation and commissioning of equipment at customer sites * Carrying out Site Acceptance Tests (SAT) and system handover * Supporting validation activities including IQ and OQ protocols where required * Mechanical fault finding and system optimisation * Supporting commissioning of control systems and PLC interfaces * Producing clear commissioning and service documentation About You • Time-served engineering apprenticeship or equivalent mechanical qualification * Experience in commissioning, installation or service engineering * Exposure to FAT, SAT, IQ or OQ processes would be advantageous * If you have not worked directly with these, experience in system testing, validation or equipment trials would also be valuable * Experience with mechanical systems such as pumps, motors, pneumatics or similar equipment * Some familiarity with PLCs or control systems * Able to read engineering drawings and technical documentation * Willing to travel across the UK and occasionally internationally This is an excellent opportunity for an engineer who enjoys hands-on project work and seeing systems through from build to final commissioning

Role: Mechanical Design Engineer Location: Bolton, Greater Manchester Salary: £35-40k (Depending on Experience) Hours/Days per week: 7am to 5pm (Monday to Thursday) - On-site working Job Description: The purpose of the Mechanical Design Engineer role is to carry out all aspects of mechanical design via production of 3D Models, General Arrangement drawings, and Design for Manufacture output (including Assembly drawings, Fabrication drawings, Bill of Materials’, and As-built drawings) in accordance with company procedure and/ or customer specification. The role is responsible for generating compliant & accurate design output into purchasing, production, and operations. Duties/Responsibilities: • Produce designs that comply with product assurance limitations, and that fully consider all stages of the product lifecycle (including material limitations, manufacturability, installability, operability etc)., • Elimination of H&S risks from designs in accordance with CDM regulations., • Produce Designer’s Risk Assessment’s for designs as required by project or product, clearly identifying mitigation measures incorporated., • Prepare 3D models in Autodesk Inventor to meet project demand, as necessary., • Produce 2D drawings from 3D models for customer review/ approval, and internal/ external manufacturing process, in accordance with the Engineering Handbook, and BS 8888., • Responsible for ensuring self-prepared drawings/ models/ documents are correct and concise prior to release into SQEP Design checker(s)., • Work closely with analysis engineers to ensure designs/ models/ drawings developed accurately reflect the theoretical analysis, advising on design issues, and logging changes in accordance with company procedure., • Understand the build sequence in design of all output, prior to release into production engineering., • Attend Design and/ or Manufacturability reviews, driving the 3D model where appropriate, and communicating design intent to the wider project team., • Support continuous improvement initiatives to increase departmental design capabilities and improve efficiency., • Contribute to R&D activities as required. Discuss innovative design solutions for bespoke works with peers and superiors., • Maximise change capture within the department, ensuring all change is captured on projects., • Provide support to the wider project team, liaising with customers as required., • Complete adherence to ISO 9001 procedures for engineering department., • Responsible for achieving schedule adherence for all actions assigned to individual/ role., • Any other ad hoc duties as may be required, and as commensurate with the grade of post. Education/Qualifications: 1. Minimum HND in Engineering, plus 5 years’ experience of industrial sheet/ steel fabrications OR; 2. Minimum Bachelor’s degree (BEng Hons) in Engineering (preferably Mechanical Engineering) plus 3 years’ experience of industrial sheet/ steel fabrications. Experience/Skill Set: • Ability to use Autodesk 3D Inventor, AutoCAD, and Autodesk Vault unaided., • Understanding of steel manufacturing techniques and limitations (incl. press brake)., • Understanding of load paths, failure modes, and operating limits of steel structures/ components., • A focus on quality adherence and timely output., • Evidence and working knowledge of BS 8888 for engineering drawings., • Ability to compile coherent Designer’s Risk Assessments., • Flexibility to work overtime to achieve project plan as required., • Strong communicator with internal and external customers alike

Previous experience as a Site Engineer on Highways or Civil Engineering projects. Site Engineer required for HIghways & Civil Engineering projects across Merseyside. A well‑established Civil Engineering and Highways Contractor with a strong reputation in the region, is seeking an experienced Site

A Site Engineer is required to join a Ground Investigation contractor on a permanent basis in Manchester. You'll find a wide selection of vacancies on our website. You will be responsible for supervising and managing teams on small to medium sized geotechnical ground investigation projects on site,

Due to consistent growth in all markets they operate in, the demand for their services is constantly increasing therefore they are looking for an Electro-Mechanical Field Engineer to join the team. This is a fantastic opportunity for an engineer to join a multi-national offering stability and securi

Site / Setting Out EngineerLocation: Devon | Southwest UKSector: Civil Engineering & GroundworksClearance Required: EL1 + BPSSAre you a skilled Setting Out Engineer looking for a new long term contract paid CIS?Join a reputable, privately owned civil engineering contract

Site Engineer - OX1 1NDNumber of Positions: 1Contract Type: PermanentSalary: 38220 - 45091Working Hours: 37Location: OxfordshireBusiness Unit: Economy & PlaceAbout UsOxfordshire County Council’s Highway Agreements Team is at the leading edge of place making, overseeing the creation of thrivin

In this role you will take responsibility for key construction engineering aspects of site projects including setting out, interpreting construction drawings, coordinating subcontractors and maintaining accurate site documentation. Site Engineer on residential builds, ideally with some commercial bu

Support Site Process Safety Engineer in the delivery of local Process Safety Management Meeting with Site Manager and Site Engineering Manager. As the Site Process Safety Engineer, you will support the Site Process Safety Programme and associated strategy, improving and developing PSRM practices and

Site Engineer | Structural Steel. Manage own workload across multiple sites.

Our client, a well-established and highly regarded civil engineering contractor, is looking to appoint an experienced Site Engineer to join their growing team in the North West. Reporting to the Site/Project Manager, you will be responsible for ensuring works are accurately set out and delivered in

Site Safety: Following on-site safety management guidelines and supervising site labour force. Interfacing with RF engineers to ensure effective site location for design objectives. Day-to-day management of the site, including supervising and monitoring the site labour force and the work of any subc

We’re hiring an Infrastructure & Site Reliability Engineer to work across both a group, including Software Integrators (SI) and Blink. Strong written and verbal communication skills - you'll engage directly with client engineering teams. You'll operate at the intersection of infrastructure, DevOps

Principle Site Reliability Engineer - WokingReference Code: 347783-en_GBContract Type: PermanentProfessional Communities: Cloud Infrastructure ManagementAbout the job you're consideringWe’re seeking passionate Principal Site Reliability Engineers who want to grow their career and delight customer

Deritend, part of the Rubix Group of Companies, was founded in 1898 and serves more than 3,500 customers in the UK and boasts a blue-chip client base that includes some of the largest manufacturers and best-known brands in the world.We specialise in optimising asset performance, including motors, ge

Site Reliability Engineer - LondonReference Code: 348242-en_GBContract Type: PermanentProfessional Communities: Cloud Infrastructure ManagementAbout the job you’re consideringWe’re seeking fellow Site Reliability Engineers who want to grow their career and delight customers through a hybrid of

A Site Engineer is required to join a Ground Investigation contractor on a permanent basis in Manchester. You will be responsible for supervising and managing teams on small to medium sized geotechnical ground investigation projects on site, ensuring complian.

Were supporting a leading civil engineering and earthworks contractor in securing a permanent Earthworks Site Engineer to join their team. Earthworks Site Engineer Permanent or Contract. This is a long-term role with consistent workload, strong support on site, and a competitive package including l

Senior Engineer Electrical Engineering (Site & Facilities).

Maintenance Engineer, Utilities Engineer or Site Se. Site Services Engineer Utilities / Boilers / Refrigeration. Join a large manufacturing site in.