Offres site engineer à BlackburnCréer des alertes d'emploi

Lead Engineer | Blackburn | Up to £45,000 | Permanent | 37.5hrsWe have an exciting opportunity for a Lead Engineer to join a well-established facilities and engineering team based in Blackburn. This is a full-time, permanent role working 37.5 hours per week on a flexible shift pattern.The RoleYou'll take the lead on all engineering activity across the site, ensuring planned and reactive maintenance is delivered to the highest standard while supporting and mentoring the wider engineering team.Key responsibilities include:Overseeing the prompt completion of all planned, reactive and remedial work ordersProviding routine and specialist engineering maintenance and breakdown support on siteOffering technical, health, safety and environmental support across the facilityTraining, mentoring and supporting site-based technicians and engineering assistantsProviding engineering advice and support to site managementLeading by example and helping build a strong, collaborative team cultureWhat You'll NeedCity & Guilds Part 3, ONC or NVQ Level 3 (or above) in Mechanical or Electrical EngineeringTime-served apprenticeship in a mechanical or electrical disciplineCSCS card (or ECS card if electrically qualified) at the appropriate levelStrong understanding of Health & Safety legislation and ACOPsKnowledge of L8 Legionella guidelinesSolid fault finding ability with the ability to read technical drawingsStrong organisational skills with the ability to manage multiple prioritiesWhat's On OfferUp to £45,000 depending on experience25 days holiday rising to 30 with servicePrivate healthcare scheme covering pre-existing conditionsPrivate pension schemeNon-contributory life insuranceEnhanced maternity, paternity and adoption payIndustry leading training and developmentStaff discounts and rewards hubTPBN1_UKTJ

Title: Senior Security Systems Design EngineerLocation: BlackburnJob Type: ContractLength: 12 months +Rate: £600-£650 per day INSIDE IR35Security Clearance required - can start on BPSS then moving to SCQualifications and training (typical)- HNC/HND/Degree in Electrical/Electronic Engineering (or demonstrable equivalentexperience).- Recognised electrical/safety training aligned to site requirements (varies by operator).- Vendor training/certification (beneficial): major VMS/ACS/IDS platforms used in the sector.- Security vetting/clearance: Enhanced BPSS & SC clearances required.Role purposeDesign, engineer and assure integrated electronic security systems (ESS) for Critical National Infrastructure (CNI) sites (e.g., energy, water, transport, telecoms, defence-related estates). The role ensures electronic & physical security solutions are safe, compliant, resilient, maintainable, and proportionate to assessed risk-often within high-assurance environments and under strict governance.Scope and typical systems- Access Control Systems (ACS): door controllers, credential technologies, biometrics, turnstiles, vehicle access.- Intruder Detection Systems (IDS): perimeter and internal detection, alarm routing, gradedsignalling.- Video Surveillance (CCTV/VSS): fixed/PTZ, analytics, storage, evidential export.- Perimeter security electronics: fence detection, radar, thermal, gates/barriers interfacing.- Intercom/help points, duress/panic alarms, lockdown/alerting functions.- Security management and integration platforms: PSIM, VMS, access control management, event correlation.- Alarm monitoring integration: SOC/ARC interfaces, incident response workflows.- Power and resilience: UPS, battery autonomy, dual feeds, segregation, surge protection,earthing/bonding.- Networked security infrastructure: structured cabling, fibre, PoE, network segmentation, time sync, secure remote access patterns (as governed).Key responsibilities1) Concept and requirements engineering- Translate security risk assessments, threat models and operational requirements into clearengineering requirements and performance specs.- Develop security design concepts (architecture options, resilience models, failure modes,coverage principles) aligned to the site's criticality.- Define interface requirements with OT/IT, building systems, fire systems and operationalprocesses.2) Detailed design and engineering delivery- Produce design packs: single line diagrams, schematics, panel designs, cable schedules, device layouts, containment requirements, integration interface documents, network topologies (asrequired).- Select appropriate technologies and grades of equipment aligned with environment, threat, maintainability and lifecycle cost.- Engineer power budgets, UPS autonomy, segregation, EMC considerations, and environmental suitability (IP ratings, temperature, corrosion).- Ensure designs support safe installation and maintainability (access for servicing, sparesstrategy, configuration control).3) Compliance, assurance and governance- Design in accordance with relevant standards, client governance and site rules (including safety, electrical, security and information assurance requirements).- Participate in design reviews, HAZID/HAZOP or equivalent safety/security assurance activities where applicable.- Maintain traceability: requirements ? design ? test ? as-built manage design change control.4) Cyber-physical security alignment- Work with cybersecurity/architecture teams to ensure secure-by-design principles fornetworked security systems (segmentation, hardening assumptions, credential management, logging, patching constraints).- Produce documentation to support risk acceptance and operational security processes (account management, secure maintenance, audit trails).5) Testing, commissioning and handover- Define test strategies: FAT/SAT, integrated testing, performance validation, resilience/failover tests, alarm response verification.- Support commissioning, resolve defects, verify as-built compliance, and produce handover documentation and training inputs.- Ensure operational readiness: SOPs input, maintenance regimes, spares, and configuration backups.6) Stakeholder and supplier management- Specify and evaluate supplier solutions review technical submissions, RFIs, deviations and value engineering proposals.- Provide technical support to procurement and contract teams (scope clarity, acceptance criteria, warranties, support arrangements).Deliverables- User/Operational Requirements (input or authored sections) and System RequirementsSpecification- Security System Architecture and integration/interface control documents (ICDs)- Drawings: GA/device layouts, wiring diagrams, schematics, cabinet layouts, network diagrams- Schedules: equipment lists, I/O schedules, cable schedules, power/UPS calculations- Test documentation: FAT/SAT scripts, test evidence requirements, commissioning plans- As-built pack, O&M manuals review, training materials input, configuration baselinesSkills and competenciesTechnical- Strong electrical engineering fundamentals: power distribution, protection, earthing/bonding, cable design, fault finding principles.- Solid understanding of physical security technologies (ACS, IDS, VSS, perimeter detection) and integration patterns.- Knowledge of resilience engineering (redundancy, autonomy, graceful degradation, failsecure/fail-safe behaviour).- Competence in drawings and engineering documentation control (CAD and documentmanagement practices).- Familiarity with networking concepts relevant to ESS (IP addressing, VLANs, PoE budgets,bandwidth/storage sizing, time synchronisation).Experience (typical)- 3-8+ years in security systems engineering/design or related building services/controls with significant ESS exposure.- Experience delivering projects through full lifecycle: concept to handover.- Experience working under strict governance (design gates, audits, regulated change control)and within live operational sites.TPBN1_UKTJ

We have a fantastic opportunity for an experienced Electrical & Controls Design Engineer to join a specialist engineering business delivering bespoke automation and control system solutions across a range of industrial sectors. This role will focus on the design, development and commissioning of PLC, SCADA and electrical control systems, supporting projects from concept through to customer handover.This position would suit an Electrical & Controls Engineer with experience designing and commissioning industrial automation systems who enjoys working on varied, project-based work. It will appeal to someone who is confident programming PLCs, developing SCADA and HMI systems, producing electrical designs and working directly with customers throughout the project lifecycle.Key Responsibilities Design and develop PLC, SCADA and HMI control systems for bespoke industrial automation projects Produce electrical schematics, wiring diagrams and control panel designs using EPLAN Carry out PLC programming, system testing, commissioning and on-site fault finding activities Integrate variable speed drives, industrial communication networks and safety PLC systems into complete control solutions* Work directly with customers to manage projects from initial design through to commissioning and final handoverIn return you'll receive a salary up to £55k and the opportunity to work on a wide variety of technically challenging automation projects with excellent long-term career prospects .So if you're looking for a new role with a growing engineering business delivering cutting-edge control systems, get in touch today with Mark Dorey on , or call on 0161 416 6296 .TPBN1_UKTJ

Engineer | Blackburn | Up to £39,000 | Permanent | 37.5hrsWe have an exciting opportunity for a Lead Engineer to join a well-established facilities and engineering team based in Blackburn. This is a full-time, permanent role working 37.5 hours per week on a flexible shift pattern.The RoleYou'll take the lead on all engineering activity across the site, ensuring planned and reactive maintenance is delivered to the highest standard while supporting and mentoring the wider engineering team.Key responsibilities include:Overseeing the prompt completion of all planned, reactive and remedial work ordersProviding routine and specialist engineering maintenance and breakdown support on siteOffering technical, health, safety and environmental support across the facilityTraining, mentoring and supporting site-based technicians and engineering assistantsProviding engineering advice and support to site managementLeading by example and helping build a strong, collaborative team cultureWhat You'll NeedCity & Guilds Part 3, ONC or NVQ Level 3 (or above) in Mechanical or Electrical EngineeringTime-served apprenticeship in a mechanical or electrical disciplineCSCS card (or ECS card if electrically qualified) at the appropriate levelStrong understanding of Health & Safety legislation and ACOPsKnowledge of L8 Legionella guidelinesWhat's On OfferUp to £39,000 depending on experience25 days holiday rising to 30 with servicePrivate healthcare scheme covering pre-existing conditionsPrivate pension schemeNon-contributory life insuranceEnhanced maternity, paternity and adoption payIndustry leading training and developmentStaff discounts and rewards hubTPBN1_UKTJ

MAINTENANCE TEAM LEADER\n Location: Accrington, LancashireSalary: £52,000Shift: Rotating 6am–2pm / 2pm–10pmWeekend Work: 1 in 6 weekends required (with Monday and Tuesday off in that rotation) Job Role of the Maintenance Team Leader\n An exciting opportunity has become available for a hands-on Maintenance Team Leader to join a well-established and fast-paced food manufacturing business in Lancashire. This role is ideal for a strong Multi Skilled Engineer with leadership experience who enjoys motivating teams, driving standards, and making a real impact within a busy FMCG environment. \n Working closely with the Engineering Manager and Maintenance Manager, you will lead a small team of engineers while remaining heavily involved in hands-on maintenance activities across the production site. The business is looking for an ambitious and motivated individual who can support team development, improve engineering performance, and help drive reliability across site. \n You will be responsible for carrying out planned preventative maintenance, reactive breakdown repairs, fault finding, and continuous improvement activities across a wide range of food manufacturing and packaging equipment. \n Sector – Factory Maintenance / Food Manufacturing Non-Negotiable Requirements of the Maintenance Team Leader\n\n • \n Previous experience within a manufacturing or FMCG environment \n • \n Leadership or supervisory experience within engineering \nDesirable Requirements for the Maintenance Team Leader\n\n • \n NVQ Level 3 or equivalent engineering qualification \nThe Maintenance Team Leader will benefit from:\n\n • \n Joining a recognised and established food manufacturing business \n • \n Excellent long-term stability and career progression opportunities \n • \n Working within a supportive engineering leadership team \n • \n Pension scheme \n • \n 25 days holiday + bank holidays \n • \n Opportunity to play a key role in driving engineering improvements across site \n\n If you are interested in this role and feel that you have the right skills, then please click apply at the bottom of this advert. \n For further details contact Shabnam Yousoof at Pioneer Selection. \n As a registered candidate with Pioneer Selection Ltd, you automatically become eligible for our referral scheme.You will receive £250 for every candidate we place in permanent employment who has been recommended by you. Terms and Conditions apply, please see our website for further details. \n

MULTI-SKILLED MAINTENANCE ENGINEER \n Job Title: Multi-Skilled Maintenance Engineer Location: Accrington, Lancashire Salary: £44,000 Shift: 6–2 / 2–10 (1 weekend in 6) Job Role of the Multi-Skilled Maintenance Engineer\n A great opportunity has opened for a Multi-Skilled Maintenance Engineer to join a well-established, fast-paced FMCG manufacturing site. This business is currently investing in improving ... \n \n ZIPC1_UKTJ

Senior Electrical Design Engineer – 12 month contract – Samlesbury Aerodrome, Lancashire - £47.12 ph UMB or £35 ph PAYE (Inside IR35) \n Please note that you will need to have recent experience using Catia V5 and indefinite leave to remain in the UK or a British nationality to apply for this role. \n The Role \n As a Senior Electrical Design Engineer you will be part of a team producing the physical product definition to satisfy a set of multidisciplinary system functional requirements, taking account of safety, cost, manufacturing, in-service support and other considerations. Your engineering capabilities will be developed across a range of design skills and product lifecycle stages, working both in a model-based and 2D drawing engineering environment centered on Catia V5. \n \n Typically your design capabilities will be developed using: \n The CATIA V5 Electrical 3D & 2D Design Toolset in the design installation of electrical equipment, routing of electrical harnesses, incorporating support structure and physical separation requirements, taking account of system performance, system safety, system redundancy as well as cost and through-life considerations. \n A key aspect of the roles is to demonstrate compliance with functional requirements, including zonal safety analysis in a collaborative multi-disciplinary team environment. \n \n Role Responsibilities: \n Not limited to... \n\n • Working closely with other engineering disciplines and functions, supplier and customer areas, fostering a team-working and collaborative product development environment.\n, • Producing and issuing Airframe engineering design data to meet project requirements, in line with design standards, whilst maintaining quality, cost and schedule adherence.\n, • Verifying design data prior to a formal independent check criteria to ensure compliance with project standards.\n, • Identifying project technical risks and opportunities, and where appropriate propose mitigation plans.\n, • Supporting all aspects of personal and professional development for yourself and, where appropriate, others in your team.\n, • Evaluating and resolving design queries, and supporting the generation of resulting modifications and changes.\n\n \n What are BAE Systems looking for from you? \n\n • Experience in an Electrical Design role\n, • Experience of operating in an electrical design role, or equivalent in one or more phases of the product lifecycle.\n, • Recent experience using Catia V5.\n\n Working pattern / hours \n\n • Typically 37 hours per week, Mon–Fri (site span hours apply; start/finish agreed with local management)\n, • 2–3 days per week on site at Samlesbury\n\n

PROJECT ENGINEER CONTROLS AND INSTRUMENTATIONJob Title: Project Engineer Controls and Instrumentation Location: Blackburn Salary: £50,000 - £55,000 (OTE £62,000+)Job Role of the Project Engineer Controls and Instrumentation A fantastic opportunity has become available for an experienced Project Engineer Controls and Instrumentation to join a globally recognised manufacturing business with a long-standing history of innovation and operational excellence. As part of a world-leading international group, this organisation manufactures high-quality products that are supplied into a wide range of industries and used in many high-profile commercial projects across the globe.Sector – ManufacturingNon-Negotiable Requirements of the Controls & Instrumentation Project Engineer Previous experience working as a Project Engineer, Controls Engineer or Improvement Engineer within a manufacturing or industrial environment.Strong knowledge of PLC control systems, HMI, SCADA and instrumentation.Proven experience delivering engineering projects from concept through to completion.Excellent communication and stakeholder management skills with the ability to coordinate multiple departments and contractors.Knowledge of UK health and safety legislation, engineering standards and contractor management.Requirements for the Controls & Instrumentation Project Engineer Experience planning, managing and delivering engineering projects to agreed timescales and budgets.Ability to coordinate internal teams, contractors and suppliers to ensure successful project delivery.Experience producing technical documentation, reports and project updates.Knowledge of risk assessments, safe systems of work and engineering compliance.Experience carrying out site inspections to monitor project progress, quality and safety.Ability to support procurement activities through equipment specification reviews and supplier coordination.Degree qualified in Electrical, Controls or a related Engineering discipline, or equivalent industry experience.The Controls & Instrumentation Project Engineer will benefit from: Working for a globally recognised manufacturing business with an excellent reputation for innovation and quality.Joining a company that continues to invest heavily in its people, technology and manufacturing facilities.Excellent opportunities for training, development and long-term career progression.Exposure to a diverse range of automation and capital engineering projects within a highly automated manufacturing environment.Competitive salary and benefits package.The opportunity to play a key role in delivering engineering improvements and automation projects across a modern manufacturing facility.If you are interested in this role and feel that you have the right skills, then please click apply at the bottom of this advert.For further details contact Antony Edwards at Pioneer Selection.As a registered candidate with Pioneer Selection Ltd, you automatically become eligible for our referral scheme.You will receive £250 for every candidate we place in permanent employment who has been recommended by you. Terms and Conditions apply, please see our website for further details.TPBN1_UKTJ

Fitter/Installation Engineer Job Type: Full-time, Temporary until Christmas initiallyLocation: Preston LancashireSalary: £23.90 per hourWorking Hours: Monday to Thursday, 7.00am–4.45pm, with a 30-minute lunch break. 37-hour working week.About the Role We are looking for an experienced BPS Fitter / Installation Engineer to join a busy production and installation team. This is a hands-on role supporting the assembly, manufacture and installation of commercial pipework systems, packaged plantrooms, boiler skids and utility cupboard heating systems.The successful candidate will report to the Production Supervisor and will be confident working from schematic layouts and 3D assembly drawings. You will support high-quality mechanical pipework installation in a factory environment, with occasional work on client sites when required.Key Responsibilities Assemble, manufacture and install commercial pipework systems, packaged plantrooms, boiler skids and utility cupboard heating systems.Read detailed schematic drawings and plan pipe systems and related equipment installations.Measure, mark, cut, thread and assemble pipework components and systems.Secure pipework using appropriate fixtures, brackets and clamps.Work with copper, screwed steel, press-fit and crimped pipework systems.Repair, maintain and support pipe systems, supports and associated equipment.Carry out strength and tightness testing on gas and water pipework in line with relevant codes and regulatory standards.Select and safely use hand tools, mechanical tools and equipment for fabrication, installation and repair work.Apply safe techniques for the temporary or permanent removal of pipework-related systems or components.Work effectively with others and contribute to positive working relationships within an engineering construction environment.Ensure all work complies with health and safety requirements, building regulations, company ISO procedures, CDM regulations, risk assessments, quality plans and departmental operating procedures.Skills and Experience Required Time-served mechanical pipefitter, heating engineer or similar background.NVQ Level 3 in mechanical pipefitting, plumbing, heating or equivalent preferred.Minimum NVQ Level 2 in pipefitting or a relevant trade discipline.Working knowledge of commercial heating equipment including boilers, pumps, press units and expansion vessels.Experience installing commercial pipework systems using copper, screwed steel, press-fit or crimped methods.Ability to read and interpret schematic layouts and 3D assembly drawings.Good organisational, communication and interpersonal skills.CSCS card desirable but not essential.What We're Looking For We are looking for someone who takes pride in their workmanship, understands the importance of safety and quality, and can work confidently as part of an engineering production team. You should be reliable, practical, detail-focused and comfortable working to drawings, procedures and deadlines.Benefits £23.90 per hour.Full-time, temporary opportunity until Christmas initially.Monday to Thursday working pattern, 7.00am–4.45pm, with a 30-minute lunch break.Varied work across factory-based manufacture and occasional site installation.Opportunity to work on commercial heating systems, plantrooms and skid units.Supportive team environmentApply Now If you are an experienced pipefitter, heating engineer or installation engineer looking for your next opportunity, we would like to hear from you. Apply today with your CV and a member of the team will be in touch.Winsearch acts as an employment agency for contract and permanent staff. We recruit for roles based in Engineering & Manufacturing, Food & Drinks, Pharmaceutical, Supply Chain & Procurement and Professional ServicesINDWINOur clients and their customers come from diverse backgrounds and so do we. We hire our people from various walks of life, each of whom make our company stronger with their talent, uniqueness, and expertise. This is what makes our company special; if you want to help us grow and take this ethos to our clients, then we cannot wait to collaborate with you!The UK has now left the European Union. Any EU, EEA or Swiss citizens living in the UK that wish to remain in the UK post Brexit need to apply to the EU Settlement Scheme. Although the closing date for applications was 30th Jun 2021, if you have not yet applied but believe that you would qualify under the EU Settlement Scheme, the Home Office have confirmed that they will consider late applications. For further information please see https://Many ThanksTPBN1_UKTJ

Company description:GXO Logistics Supply Chain Inc.Job description:Are you ready to shape the future of planning by embedding logistics expertise at the heart of a critical Defence operation? Can you turn complex supply chain challenges into smarter, more efficient planning solutions that deliver measurable business impact? Do you have the influence, vision, and operational expertise to connect demand, supply, and logistics into one seamless planning function?Here at GXO, were looking for a motivated Planning Optimisation Manager to join our BAE Systems site based in Blackburn . You will be responsible for informing, influencing and guiding planning decisions across three critical areas:Demand AlignmentSupply AlignmentForward PlanningThis is an 18-Month FTC, position working Monday Friday 09:00 17:00 , 37.5 hours per week.Pay, benefits and more:Were looking to offer a salary of up to £75,000.00 per annum, and 25 days annual leave (plus bank holidays). Your benefits package includes a company car or a car allowance £595.00 pcm , a company sponsored pension scheme, private medical & dental insurance, a 24/7 online GP service, life assurance and a fully comprehensive employee assistance programme. Youll also have access to our MyBenefits platform offering a variety of high street discounts, a cycle to work scheme, cashback cards, a saving scheme and much more!What youll do on a typical day:Effective representation of GXO Logistics within BAE's Planning functionImproved alignment between manufacturing plans and logistics capabilityImproved supplier conformance and inbound material flowEnhanced planning visibility and forecasting accuracyDelivery of planning optimisation initiatives and measurable business benefitsWhat you need to succeed at GXO:Experience within Defence, Aerospace, Manufacturing or other complex operational environments would be advantageous but is not essential. We welcome candidates who can bring fresh thinking and transferable planning, supply chain or logistics expertise from other sectorsLean, Six Sigma or Continuous Improvement qualificationsProject management experienceWe engineer faster, smarter, leaner supply chains.TPBN1_UKTJ

About The Role Join HomeServe as a Gas Repair Engineer and play a vital role in keeping our customers' homes running smoothly. • Location: Blackburn • Salary: £46,250 + £1,500 guaranteed bonus in your first year • Hours: You will average 40 hours per week (annualised hours - shorter hours in summer, longer in winter, with consistent pay). Includes evenings, weekends and bank holidays. What you'll be doing As a Gas Repair Engineer, you'll be working in customers' homes diagnosing and repairing gas appliances and heating systems. Your day-to-day will include: • Diagnosing faults on boilers and central heating systems • Carrying out repairs to restore heating and hot water • Carrying out boiler services • Completing safety checks and ensuring compliance with regulations • Managing jobs independently while delivering excellent customer service • Representing HomeServe in customers' homes with professionalism and care This is a field-based role where no two days are the same, giving you variety and autonomy in your work. What you'll get HomeServe offers a competitive package designed to support you both at work and at home: • £46,250 + £1,500 guaranteed bonus (year one) • Paid overtime opportunities • Pension scheme with income protection • 33 days holiday (buy/sell options) • Company van & fuel card • All tools, uniform & PPE provided • Access to industry-leading training & ongoing development • Free HomeServe Cover 8 policy • Smart tech salary sacrifice (Ikea/Currys) About You What we're looking for • Valid gas qualifications: CCN1, CENWAT1, HTR1, & CKR1 • Experience repairing gas appliances and central heating systems • Full UK driving licence (max 6 penalty points) • Strong customer service skills • Ability to work independently and solve problems on site • A positive, proactive approach to your work Training and support We'll give you everything you need to succeed from day one: • Week 1: Classroom-based induction Monday to Friday at our Walsall Head Office • Week 2: On-the-job training alongside an experienced HomeServe Gas Repair Engineer (Where required, we will pay for your accommodation and meal allowance for your induction). Why join HomeServe? At HomeServe you'll be part of an open, engaged culture where everyone has an equal voice and the opportunity to get involved, as well as make a real difference in our customers' lives. You'll work in a fun, friendly and inclusive environment where people understand the value of their contribution to our goals and are encouraged to recognise a job well done. We give you the tools, training, and support to do your job well and take pride in helping customers when they need it most. Ready to build a rewarding career with HomeServe? Apply today and take the next step with us. About Us HomeServe has got over 30 years' experience taking care of the nation's homes. From home emergency cover to one-off repairs, we're here 24/7. Whether it's plumbing, drainage, heating or electrics, our home experts are ready to get the job done. TPBN1_UKTJ

About Barhale Who are Barhale? Barhale is a business founded on family values having been established by our Chairman, Dennis Curran in 1980. We are one of the largest privately owned civil engineering and infrastructure specialists in the UK, with over 40 years of experience in providing design, civil engineering and maintenance services working across multiple sectors including: xrnqpay • Water, • Transpor Make your application after reading the following skill and qualification requirements for this position. Please click on the apply button to read the full job description

Develop and implement site-specific processes and procedures for Process Safety Management (PSM) while ensuring regulatory compliance. Proven experience as a Process Safety Engineer. This dynamic position involves managing Process Safety Management (PSM) processes, influencing HSE policies, and impl

MAINTENANCE TEAM LEADER Location: Accrington, Lancashire Salary: £52,000 Shift: Rotating 6am–2pm / 2pm–10pm Weekend Work: 1 in 6 weekends required (with Monday and Tuesday off in that rotation) Job Role of the Maintenance Team Leader An exciting opportunity has become available for a hands-on Maintenance Team Leader to join a well-established and fast-paced food manufacturing business in Lancashire. This role is ideal for a strong Multi Skilled Engineer with leadership experience who enjoys motivating teams, driving standards, and making a real impact within a busy FMCG environment. Working closely with the Engineering Manager and Maintenance Manager, you will lead a small team of engineers while remaining heavily involved in hands-on maintenance activities across the production site. The business is looking for an ambitious and motivated individual who can support team development, improve engineering performance, and help drive reliability across site. You will be responsible for carrying out planned preventative maintenance, reactive breakdown repairs, fault finding, and continuous improvement activities across a wide range of food manufacturing and packaging equipment. Sector – Factory Maintenance / Food Manufacturing Non-Negotiable Requirements of the Maintenance Team Leader Previous experience within a manufacturing or FMCG environment Leadership or supervisory experience within engineering Desirable Requirements for the Maintenance Team Leader NVQ Level 3 or equivalent engineering qualification The Maintenance Team Leader will benefit from: Joining a recognised and established food manufacturing business Excellent long-term stability and career progression opportunities Working within a supportive engineering leadership team Pension scheme 25 days holiday + bank holidays Opportunity to play a key role in driving engineering improvements across site If you are interested in this role and feel that you have the right skills, then please click apply at the bottom of this advert. For further details contact Shabnam Yousoof at Pioneer Selection. As a registered candidate with Pioneer Selection Ltd, you automatically become eligible for our referral scheme. You will receive £250 for every candidate we place in permanent employment who has been recommended by you. Terms and Conditions apply, please see our website for further details. TPBN1_UKTJ

Senior Mechanical Design Engineer Would you like to be part of Vital Energis Strategy of Growth? Due to our ongoing growth, we are looking for a number of Senior Mechanical Design Engineers to join our growing teams based in our Blackburn, Glasgow and London offices. We are currently looking for: Intermediate Design Engineers Senior Design Engineers Principal Design Engineers About the role As part of the Engineering Design team you will be involved in producing a broad range of conceptual to fully detailed designs covering things such as District and Communal Heating Systems, Energy Centres, Trigeneration Solutions and Heat Pumps Due to the nature of the role you will be involved in projects at a variety of stages and locations utilising a range of technologies requiring initial conceptual work, site investigations, surveys, client meetings, project submissions and presentations. The Company Vital Energi is a leading provider of renewable energy infrastructure and systems to the public and private sectors. We are supporting Hospitals, Universities, New Build developments, Towns and Cities as well as Industrial and Commercial clients to decarbonise their buildings. We have and continue to work on ground-breaking projects throughout the UK which are supporting the UKs Net Zero targets, such as the recently announced £1 billion low-carbon infrastructure project for Westminster. With plans to double our headcount over the coming years, supported by offices opening in new locations across the country and our strong investment pipeline, coupled with our expansion into new markets such as industrial power generation with our very own Energy-from-Waste facility, there is no better time to join the family here at Vital Energi. Keyresponsibilities Supporting the design of distributed energy schemes, energy centres, district heating networks and other major projects Interpreting, appraising and documenting client requirements Carrying out calculations, equipment selection and process operation Producing schematics and detailed drawings Maintaining an awareness of cost implications within the design process Dealing with design issues and minimising their impact Ensuring compliance with CDM requirements and in-house processes Conducting HAZOP studies and Risk Assessments Assisting in specifying mechanical aspects for tendering works What you will need E ducated to at least HNC/HND level in Mechanical, Building Services or similar Engineering discipline Have at least 3+ years of relevant experience Design experience in at least one of the following fields: Building Services, CHP, Boilers/Heating, HVAC, Steam, Air Handling, Cooling, Renewable Energy (e.g Solar or Heat Pumps), or similar Proficient in AutoCAD Full UK manual driving licence The Package: S alary negotiable DOE Car Allowance Contributory Company Pension Scheme Non-contributory death-in-service insurance Employee Assistance Programme 25 Days Holiday plus 8 days bank holidays. Additional holidays awarded in line with length of service Option to purchase/sell additional holidays Onsite gym/wellbeing centre at our Blackburn Head Office Discounted gym membership across the UK EV charging points where possible Applications will be processed within 28 days of receipt. If you have not heard from us within this time period it will mean that your application has unfortunately been unsuccessful. The company is opposed to all forms of discrimination and will select for employment, training and promotion on the basis of suitability for the job and/ or merit. It is company policy that no job applicant or employee receives less favourable treatment than another on the grounds of sex, race, colour, age, ethnic or national origins, political affiliations, religious beliefs, marital status, physical disability or is disadvantaged by unjustifiable conditions or requirements. Applicants must have the unrestricted and ongoing right to work in the UK for the duration of employment, without the need for sponsorship . Due to the nature of this role, we are unable to support visa sponsorship or employ individuals with time-limited permission or conditions attached to their right to work in the UK Notice to Agency and Search Firm Representatives: V ital Energi Utilities Ltd is not accepting unsolicited CVs from agencies and/or search firms for this job posting. CVs submitted to any Vital Energi Utilities Ltd employee by a third party agency and/or search firm without a valid written & signed search agreement, will become the sole property of Vital Energi Utilities Ltd. No fee will be paid if a candidate is hired for this position as a result of an unsolicited agency or search firm referral. Thank you TPBN1_UKTJ

Job description: Are you an Engineer with experience in an industrial environment? Are you multi-skilled with an electrical bias and ability to turn your hand to anything that comes your way? Do you like the sound of a full-time, permanent role on a great site within a growing company? Here at GXO,

Contract Design Engineer Hinckley £46. P/ hr (Inside IR35) On site A Design Engineer will take responsibility of the delivery of the Design and Development of a number of components. Duties and Responsibilities: - Responsible for the delivery of the Design and Development of a number of components,

Commercial Gas Engineer Meridian are working with a well-established M&E contractor in the North-west who predominantly work across Preston, Lancaster, Blackpool, Wigan, and Blackburn areas. With a growing FM team of permanent maintenance engineers, you would be joining a respected and growing company. With a wide variety of work on commercial contracts in the area, there are plenty of additional earning possibilities as well as a strong benefits package. Benefits include (but are not exclusive to): Starting salary between £45k - £50k p.a (based on standard working week) Plenty of additional overtime and weekends (paid at 1.5x and 2x respectively) Company Vehicle with additional fuel card Door-to-door travel expenses Immediate start available (subject to successful application) Company pension scheme Sickness and Death in Service schemes 20-days holiday which increases with service, plus Bank Holidays Company mobile and tablet Progression, upskilling, and training Requirements for this role: Mechanical City & Guilds qualification to NVQ Level 2 or Level 3 ACS Gas Certifications Unvented Cyclinders Experience of Gas Maintenance and PPM within commercial environments Current Enhanced DBS Check(or willingness to undertake) Full UK Driving Licence Experience being customer and client-facing Duties include (but are not exclusive to): Attending commercial projects and call-outs to maintain, fault-find, service, and fixgas building services Carry out installation, maintenance, and remedial work oncommercialgas systems such as boilers, heat pumps, valves, vessels etc. Complete maintenance and installation tasks reliably, meeting time demands whilst ensuring all work complies with health & safety and building regulations Communicateprofessionally and effectivelywith with clients and site managers in various locations, sometimes including sensitive environments Working on-call when required If you are looking to join a growing maintenance team with increasing regionalised work, then please apply directly to the advert or email for more information Meridian Business Support is a recruitment specialist acting on behalf of our client as an Employment Agency for this vacancy. TPBN1_UKTJ

Switchgear Test/Commissioning Engineer Blackburn | £17.87 per hour | Excellent Career Opportunity We're recruiting a Commissioning Engineer to join a leading engineering manufacturer delivering modular electrical and power solutions for critical infrastructure projects. The Role Commission and test modular electrical systems and LV switchgear Carry out in-house and on-site commissioning Complete testing, commissioning and handover documentation Support first-of-kind (FOK) testing and equipment integration Fault-find electrical systems and resolve technical issues Work closely with project teams and customers Requirements Previous experience as a Commissioning or Test Engineer Electrical background with knowledge of LV switchgear Level 3 Electrical or Engineering qualification Able to read electrical drawings and fault-find Flexible to travel to customer sites when required Desirable Data Centre experience PDU experience Level 4 HTQ Engineering qualification What's on Offer £17.87 per hour Long-term opportunity with a global engineering business Workshop and site-based work Ongoing training and career development Work on innovative modular electrical projectsApply today! Neil Davies - Employment Solutions ☎️ (phone number removed) (url removed)

Are you an experienced Multiskilled Maintenance Engineer who has worked on food processing machinery, looking for your next permanent position? Is Blackburn an area you can easily commute to work? Would a salary of £48000 be OK for you plus overtime? Are you happy working either a 4 on 4 off days and nights (with no Sat nights) OR a permanent 18.00 - 06.00 shift? Happy doing PPM's and reactive maintenance? If you have answered "yes" to the above questions then this may be the right role for you. Please apply and suitable candidates will be called and given additional information on the company and the position. Duties will include; Work as part of a small team of multi-disciplined engineers Undertake PPM's on equipment Action repairs and ensure all measures taken are recorded so recurrent faults can be recognised Liaise with the Engineering Manager and Senior Engineer to ensure the supply of appropriate parts Minimise the amount of downtime suffered by the site following machine breakdowns Continually develop your skills and knowledge * Comply with all health, safety and environmental policies and procedures Skills required Strong Electrical and Mechanical knowledge and ability on Food processing machinery Process control knowledge. Competent in building electrical control systems from switchgear through to software implementation. Engineering apprenticeship and associated qualifications such as BTEC ONC, HNC, HND in Electrical Engineering is essential Have a proven track record in an Engineering and fault-finding role gained from within a FMCG environment. Have a good understanding of HACCP, COSHH and GMP principles Drive Root Cause Analysis and strive to prevent re-occurrence with counter measures. PLC fault finding. CMMS experience and knowledge. Ability to deploy and execute the preventative maintenance strategy for the site. Position - Multiskilled Maintenance Engineer Salary - £48000 Shift - 4 on 4 off days and nights OR 18.00 - 06.00 (looking for either) Location - Blackburn Pension - Auto Enrolment Kinetic plc is a Recruitment Consultancy with 40 years of experience of delivering staffing solutions to the engineering, manufacturing and technical industries. Kinetic plc treats all applications with a high degree of care, we review all submissions and will attempt to contact applicants who match the job profile. Those that do not meet the specification may not be contacted but their CV retained to be considered against future opportunities. S&K1

We are seeking a Process Safety Engineer to play a pivotal role in ensuring compliance while driving a culture of commitment-based process safety. This dynamic position involves managing Process Safety Management (PSM) processes, influencing HSE policies, and implementing improvement initiatives. The role is crucial to achieving organisational and regulatory safety objectives. Key Responsibilities Develop and implement site-specific processes and procedures for Process Safety Management (PSM) while ensuring regulatory compliance. Provide expert advice and coaching to line management to build capability and deepen understanding of PSM. Lead the delivery of HSE and PSM policies, fostering a culture of safety and hazard management. Act as a role model to drive the transition from compliance-based to commitment-based safety practices. Participate in cross-functional forums and initiatives to share knowledge and benchmark best practices.Requirements: Proven experience as a Process Safety Engineer Experience with HAZIDs, HAZOPs, Risk assessments, Management of Change (MoC), Root Cause Analysis, Process improvement & more. Familiar with Chemical Manufacturing environment - COMAH, DSEAR, ATEX. Degree qualified in relevant discipline Any knowledge of Electrical engineering, and Electrical safety is advantageous. Location: Blackburn Permanent Salary - c £48k - £65k (dependent on experience) + Benefits. Working hours: (Apply online only), Monday - Thursday, (Apply online only) Friday, 39hrs Benefits: 35 days holiday (inclusive of BH), pension, free lunches, free on-site parking. Click apply or contact Jacob Golding at Employment Solutions for further information - (phone number removed) - (url removed)

Maintenance Shift Engineer Preston, Lancashire £52,000 per year TXM Recruit is partnering with a prominent automation and intralogistics company to hire a skilled Maintenance Engineer for their automated distribution site in Preston. These roles involve maintaining and optimizing state-of-the-art machinery to ensure seamless operation at the distribution facility. Shift Pattern Schedule: Panama shifts Work Hours: Between 6am-6pm and 6pm-6pm (2 weeks of day shift, 2 weeks of night shift and rotate between the two) Key Responsibilities Perform mechanical disassembly and reassembly tasks, basic field wiring, equipment calibration, and system testing. Efficiently manage time using CMMS, aiming for over 90% utilization. Complete reactive repairs within set timeframes to minimize downtime. Conduct servicing and repairs of installed products, taking hands-on ownership of issues to achieve swift resolutions. Interpret electrical schematics and work confidently with 415V motor controls. Prioritize health and safety by conducting thorough risk assessments. Demonstrate strong mechanical skills, including the ability to read and follow assembly drawings. Follow setup instructions, assembly guides, and checklists with precision. Display exceptional attention to detail and follow-up capabilities. Understand and work with control systems. Communicate clearly and effectively with stakeholders at all levels within the organization and customer environments. Skills and Qualifications Required Qualification at NVQ/BTEC/C&G Level 3 in Electro-Mechanical Engineering or a related field. Familiarity with Non-Destructive Testing (NDT) methods and technologies. Knowledge of PLC systems and their functionality. Experience with pneumatics and hydraulics is an advantage. Proficiency in basic Microsoft Office applications. Experience using CMMS systems and managing engineering inventory. A qualification equivalent to HNC/HND is preferred but not essential. Desirable Attributes Mechanical aptitude, including the ability to disassemble and reassemble equipment using technical diagrams. Familiarity with 415V motor controls and understanding of PLC systems. Awareness of health and safety standards, including conducting risk assessments. Customer-oriented approach with effective communication skills to interact with stakeholders at all levels. Willingness to learn, adapt, and participate in training programs, including potential travel within Europe. Benefits Employer pension contributions of up to 6%. Comprehensive private healthcare coverage, including optical, dental, and hearing benefits. Life insurance for added financial security. Health care cashback scheme, covering private medical excess costs. Access to a benefits portal offering lifestyle discounts and training resources. Employee assistance program for personal and professional support. Ride-to-Work scheme to promote sustainable commuting. Referral program with rewards for recommending new hires. Employee of the Quarter awards to recognize outstanding contributions. TXM Recruit is an equal opportunities employer. If you have any specific requirements or require assistance or reasonable adjustments to be made for you during the selection process due to disability or long-term health condition, we will do our best to assist you. INDUK

Roles - PSV Engineer / PSV Technician / PSV Mechanic / Bus Technician Location: Blackburn Pay Rate: £34.00 per hour Outside IR35 Do one of these roles describe you? Do you feel undervalued your current role? Are you an experienced PSV Mechanic? Are you available to start work right away? Why not come join our team of engineers here at Excel Resourcing, we specialise in supporting several blue-chip clients who operate in the road transport industry. Benefits of working for Excel: • Weekly Pay, • Long-term contracting work, • Product Training provided, • Minimum Hourly Rate of £34.00 These roles involve: • Carrying out routine maintenance and repairs on all makes of PSV, • Diagnosing and rectifying all types of PSV faults, • Ensuring all vehicles worked upon are handled carefully and that the relevant precautions are taken whilst on the premises., • Liaising with the parts department to attain correct parts., • Ensuring health & safety regulations and safe working practices are adhered to., • Maintaining a high standard of cleanliness and tidiness, • Carrying out routine maintenance on Commercial Vehicles, PSV, • Ensuring appropriate clocking's are made and all job cards and service sheets are completed in a timely manner., • MOT preparation, • Carrying out vehicle inspections, • Warranty work, • Workshop based or Roadside repairs, • Breakdown standby on a rota basis, • Keeping up to date with product knowledge As a contractor you will offered various contracts across the region depending on where the requirements are. The hourly rate and duration of contract can vary depending on the client necessity and location. You will be required to provide your own car/van and tools and be prepared to travel from one site to another when required. Excel Resourcing is a specialist engineering support within the road transport industry, our focus is to support many clients within the truck and bus sectors across the UK. If you feel you match the desired criteria, or you would like more information on roles such as Commercial Vehicle Technician, PSV Engineer, PSV Mechanic or Fitter, we would really like to hear from you. #HGVTechnician #HGVMechanic #HGVFitter #TruckFitter #TruckTechnician #TruckEngineer #TruckMaintenance #TruckMechanic #DieselFitter #DieselTechnician #DieselMechanic #HeavyVehicle #VehicleTechnician #PSVTechnician #PSVMechanic #PSVFitter #BusFitter #BusTechnician #BusEngineer #BusMechanic #PSVEngineer #PCVTechnician #PCVFitter #PCVMechanic #PCVEngineer

MULTI-SKILLED MAINTENANCE ENGINEER Job Title: Multi-Skilled Maintenance Engineer Location: Accrington, Lancashire Salary: £44,000 Shift: 6–2 / 2–10 (1 weekend in 6) Job Role of the Multi-Skilled Maintenance Engineer A great opportunity has opened for a Multi-Skilled Maintenance Engineer to join a well-established, fast-paced FMCG manufacturing site. This business is currently investing in improving its engineering standards and is looking for motivated engineers who want to make a real impact on site performance and reliability. Working within a large engineering team, you will play a key role in ensuring production equipment runs safely, efficiently, and with minimal downtime. This is an ideal role for an engineer who thrives in a hands-on environment and is keen to drive improvements. You will be responsible for carrying out electrical and mechanical maintenance, fault-finding, and planned preventative maintenance (PPM) on a range of high-speed production and packaging machinery. Sector – Factory Maintenance (FMCG) Key Responsibilities Carry out planned preventative maintenance (PPM) to schedule Respond to breakdowns and perform rapid fault diagnosis Maintain and repair production and packaging equipment Record all maintenance activity to support asset history and reliability Work to high engineering and safety standards, including food-safe practices Support continuous improvement initiatives across the site Equipment You Will Work On Conveyors, belts, bearings, and chains Packaging machinery Drives, sensors, inverters, and motors Typical faults include: Conveyor breakdowns and jams Faulty sensors causing stoppages Oven temperature issues Packaging machine misfeeds Pneumatic failures Non-Negotiable Requirements Multi-skilled maintenance experience in a manufacturing/factory environment Engineering qualification (NVQ Level 3 or equivalent) Desirable Requirements Experience within FMCG or food manufacturing Exposure to high-volume production machinery The Multi-Skilled Maintenance Engineer Will Benefit From: Working for a stable and growing manufacturing business Opportunity to influence and improve engineering standards Supportive leadership focused on development and progression Company pension 25 days holiday + bank holidays

Lead Mechanical Engineer - Antenna Systems This is an opportunity to join a business with a long history in satellite communications that is entering an exciting new phase of growth. The company is expanding into new products, technologies and markets, creating an opportunity for an experienced Mechanical Engineer to play a key role in the development of the next generation of antenna systems. As Lead Mechanical Engineer, you will take ownership of the design and development of steerable antenna systems used within satellite ground stations. These range from smaller motorised antenna systems through to large, complex structures, all requiring a combination of mechanical design expertise, systems thinking and engineering leadership. This is a hands-on leadership role rather than a purely management position. You'll be leading the design function whilst remaining closely involved in the technical detail, working alongside engineers to solve problems, review designs and support the development of new products. You will initially lead a small team consisting of experienced mechanical and microwave engineers, with plans for the team to grow as the business continues its expansion. The role will involve coordinating design activities, leading design reviews, overseeing development programmes and ensuring projects progress from concept through to manufacture and delivery. You'll work closely with internal stakeholders across R&D, production and project teams, helping to bridge the gap between design and manufacture while ensuring technical solutions meet both customer and business requirements. This role could suit an experienced engineering manager who still enjoys being involved in design work, or a strong Senior Mechanical Engineer looking to take their first step into leadership. In either case, you'll need the credibility and technical expertise to lead from the front and support the development of both products and people. The business offers the opportunity to make a genuine impact. With significant investment in future growth and a strong pipeline of new developments, you'll have the chance to help shape both the technology roadmap and the future direction of the engineering team. Key Requirements • Strong mechanical design background within satellite communications, • Experience designing antennas, steerable antenna systems or similar mechanical structures, • Understanding of motorised positioning systems, mechanisms and motion control, • Experience leading engineering projects through design, development and manufacture, • Ability to manage and coordinate multidisciplinary engineering activities, • Strong communication and stakeholder management skills, • Comfortable remaining hands-on whilst leading a team, • Experience working within SATCOM, RF, aerospace, defence or related engineering environments, • Degree qualified in Mechanical Engineering or a relevant engineering discipline, • Ability to work on-site in Accrington

Commercial Gas Engineer Meridian are working with a well-established M&E contractor in the North-west who predominantly work across Preston, Lancaster, Blackpool, Wigan, and Blackburn areas. With a growing FM team of permanent maintenance engineers, you would be joining a respected and growing company. With a wide variety of work on commercial contracts in the area, there are plenty of additional earning possibilities as well as a strong benefits package. Benefits include (but are not exclusive to): Starting salary between £45k - £50k p.a (based on standard working week) Plenty of additional overtime and weekends (paid at 1.5x and 2x respectively) Company Vehicle with additional fuel card Door-to-door travel expenses Immediate start available (subject to successful application) Company pension scheme Sickness and Death in Service schemes 20-days holiday which increases with service, plus Bank Holidays Company mobile and tablet Progression, upskilling, and trainingRequirements for this role: Mechanical City & Guilds qualification to NVQ Level 2 or Level 3 ACS Gas Certifications Unvented Cyclinders Experience of Gas Maintenance and PPM within commercial environments Current Enhanced DBS Check (or willingness to undertake) Full UK Driving Licence Experience being customer and client-facingDuties include (but are not exclusive to): Attending commercial projects and call-outs to maintain, fault-find, service, and fix gas building services Carry out installation, maintenance, and remedial work on commercial gas systems such as boilers, heat pumps, valves, vessels etc. Complete maintenance and installation tasks reliably, meeting time demands whilst ensuring all work complies with health & safety and building regulations Communicate professionally and effectively with with clients and site managers in various locations, sometimes including sensitive environments Working on-call when requiredIf you are looking to join a growing maintenance team with increasing regionalised work, then please apply directly to the advert or email (url removed) for more information Meridian Business Support is a recruitment specialist acting on behalf of our client as an Employment Agency for this vacancy

Morson Edge are working with a tier 1 contractor who are seeking a Site Engineer to join their Civil Engineering/Water division. The purpose of this role is to provide site engineering duties to a number of projects within the region. The Site Engineer will establish the level and survey control for

Key responsibilities: ·Setting out and surveying for drainage, earthworks and road construction ·Supporting the delivery of highways and civil engineering works ·Managing and coordinating subcontractors ·Completing QA, ITPs and as-built records ·Working closel

The DXC Third Line Citrix Engineer is an experienced, multi-skilled professional, responsible for the support, maintenance & expansion of our UK Secure Client environments, ensuring a smooth and reliable experience for the end user base.

Set out and monitor cut/fill levels, formation levels, platform levels, drainage etc Produce and maintain groundworks calculations Setting out externals works Work closely with the CM, PM, and SM, alongside subcontractors Maintain accurate site recordsExperience Required for the Freelance Site Engin

This is an excellent opportunity for an experienced Engineer looking to join a growing business, providing engineering support across multiple residential groundwork and infrastructure projects throughout the Northern Home Counties region. Linsco are delighted to be working alongside our client, a w

Senior Site Engineer Location: Haslingden Contract: 5 years worth of work - CIS Day Rate: £(Apply online only) DOE An exciting opportunity has arisen for an experienced Senior Site Engineer to join a leading civil engineering contractor delivering major infrastructure and heavy civils project

I have been asked to find 3 Site Engineers for a project close to Scunthorpe. My client is a Civil Engineering/RC frame/Structures specialist operating nationally. My client will be working on the site infrastructure package- groundworks.

EHS Site Process Safety Engineer (On-site Role). As a EHS Site Process Safety Engineer, you'll join a world leader in platinum group metals with over 200 years of history. As a EHS Site Process Safety Engineer, you will help drive our goals by:.

Field Engineer Location: Somerset Salary: £30k - £35k DOE Permanent | Full-Time Optima is recruiting on behalf of a leading broadband provider that is transforming connectivity across England and Wales. As their network continues to expand, they are looking for experienced and motivated

PSR Solutions are currently recruiting for a Freelance Setting Out Engineer on behalf of a specialist civil engineering contractor for a project based in East London. Interpreting rebar layouts and bending schedules to support the site team. Working closely with steel fixers, shuttering carpenters a

Site Engineer - Local Authority Highways Improvement Scheme - Farrington Gurney, Somerset £350 per day | CIS Umbrella | Initial 4-Month Contract with Strong Scope for Extension Our client, a Tier 1 contractor, is seeking an experienced Site Engineer to join the team delivering a local county

A leading Tier One Main Contractor is looking to appoint an experienced Freelance Site Engineer to join the delivery team on a major high-rise development in Canary Wharf. Resolving technical queries alongside the site management and design teams.

This is a clean water treatment site and requires an engineer to support the existing site team to include site manager, Foreman and mechanical specialists. Site Engineer required for an immediate start to provide setting out and site control for the installation of pipe works and RC slabs for tanks

A well-established construction and engineering contractor is seeking an experienced Freelance Setting Out Site Engineer to support the delivery of a light industrial construction project on the Isle of Wight. The role will suit an experienced Site Engineer who has worked on light industrial, indust

Teamforce Labour is currently seeking an experienced Senior Site Engineer for an immediate start on a major Civil Engineering and Infrastructure project in Rossendale, Lancashire, BB4. Mentor and support Site Engineers and junior engineering staff. We are looking for a highly motivated and experienc

Position: Site Service Engineer Salary: £45,000 - £50,000+ Bonus (£1500) + Regular overtime at enhanced rate Location: Somerset Shift Pattern: Monday-Friday (Days) Are you an engineer who thrives in a fast-moving, hands-on environment? Do you want to work on some of the most advan

If you are a Site Reliability Engineer looking to join one of the world’s most elite teams, please apply for more information. An Elite FinTech Firm is looking for a highly talented DevOps Engineer/Systems SRE to join a talented flat-structured team within a larger firm! This team has an unlimited

London for a role that owns AI capabilities end-to-end, from data and context feeding models to agent orchestration and the generative UI seen by users.You will ship and operate full-stack apps in production, spanning backend, frontend, data, and ML as a single team.You will build agent loops, integ

You will be a trusted expert, helping to define and implement the strategy and building the tools that empower our engineers. SRE or platform engineering role, with a focus on observability for large‑scale, distributed compute or network systems.

You're not a research scientist; you wield models and engineer ruthlessly around their uncertainty. The AI spine: prompt/context engineering, agents, tool use, structured outputs, evals, MCP Python and TypeScript/Node + React; comfortable with async, streaming, and observability.