Welding jobs in RainhamCreate job alerts

Multi-Skilled Workshop Mechanic Location: Cranham, near Upminster, EssexPay: £18.00-£22.00 per hourWe are recruiting on behalf of our client, a well-established and respected roadside assistance and vehicle recovery company with a busy depot and workshops based in Cranham, near Upminster, Essex.Due to continued growth, they are looking for an experienced Multi-Skilled Workshop Mechanic to join their team. This is a varied, hands-on role working on an extensive range of vehicles, from pre-1960s classics through to modern cars, sports and performance vehicles, vans and light commercial vehicles.This position is ideal for someone who enjoys variety, takes pride in their workmanship, and can confidently manage their own workload while working with minimal supervision.Key Responsibilities Diagnose, service and repair a wide variety of petrol and diesel vehicles.Carry out maintenance and repairs on classic, modern, sports and performance vehicles.Rebuild and set up carburettors.Complete engine, suspension and brake repairs and rebuilds.Conduct vehicle inspections and fault diagnosis.Undertake welding and fabrication work where required.Complete servicing and preventative maintenance to a high standard.Ensure all work is carried out safely, efficiently and professionally.Requirements Proven experience as a qualified Vehicle Mechanic or Technician.Excellent mechanical knowledge across both classic and modern vehicles.Experience working on both petrol and diesel engines.Strong diagnostic and fault-finding abilities.Ability to work independently and manage your own workload.Welding experience is advantageous.A proactive approach with excellent attention to detail.Full UK driving licence preferred.What's on Offer £18.00-£22.00 per hour, depending on experience.Full-time, permanent position.Varied and interesting work on everything from classic vehicles to modern performance cars.Friendly, supportive and well-equipped workshop.Long-term opportunity with a respected local business that has built an excellent reputation in roadside assistance, recovery and vehicle repair.If you're an experienced mechanic looking for a role where no two days are the same and you enjoy working on a diverse range of vehicles, we'd love to hear from you.TPBN1_UKTJ

Fine Limit Sheet Metal WorkerCompany: Optical PrecisionPay Rate: £19.00 £20.00 / hour + excellent overtime ratesHours: Full-time, 40 hours per weekSheet Metal Worker - Why Join Us?Stability: Over 45 years of industry-leading engineering expertise.Premium Sectors: Work on high-spec Aerospace, Defence, Marine, and Nuclear projects.Modern Facility: Advanced high-speed machining, fabrication, and welding environment.Sheet Metal Worker - The PackageCompetitive Pay: Up to £20.00 per hour based on experience.Overtime: Readily available to boost your earnings.Time Off: 30 days of paid holiday (including public holidays).Perks: Company pension, onsite parking, and free refreshments.Growth: Clear pathways for personal career development.Sheet Metal Worker - The RolePrecision: Deliver fine limit sheet metal work to tight tolerances (+/- 0.010").Blueprint Reading: Plan manufacturing methods directly from complex technical drawings.Fabrication: Execute pattern development using cutting, forming, shaping, and bending.Quality Control: Work to elite OEM specifications with an uncompromising eye for detail.What We Are Looking ForProven experience in fine limit sheet metal fabrication.Ability to work confidently with aluminium, stainless steel, and plastics.Strong prototyping and production skillsTPBN1_UKTJ

Job Title: Sheet Metal Worker \n Location: Crayford \n Salary: £17.00 - £20.00 per hour \n Sheet Metal Worker required to join a well-established company that specialize in prototyping and production of fine limit sheet metal work, precision CNC machining and welding to OEM customer specification, in particular to the Aerospace, Defence, Marine, Nuclear and Telecommunications industries. \n Key Responsibilities \n\n • Fi...\n\n \n \n ZIPC1_UKTJ

Job Title: CNC Miller- Programme, Setter, OperatorLocation: CrayfordSalary: £17.00 - £20.00 per hourCNC Miller required to join a well-established company that specialize in prototyping and production of fine limit sheet metal work, precision CNC machining and welding to OEM customer specification, in particular to the Aerospace, Defence, Marine, Nuclear and Telecommunications industries.Key ResponsibilitiesCNC Milling - 3 & 5 AxisSetting and OperatingUse of Heidenhain ControlsRead and understand engineering drawingsMonitor output and make necessary adjustmentsRequirementsExperience with CNC Milling - Setting, Operating & ProgrammingUnderstanding of engineering drawings and working with tight tolerances.Must live within a commutable distance of DartfordSalary & Further InformationFull time - Permanent position40 hours per week (overtime available)£17- £20 per hour (DOE)30 days holiday including BHPensionBennett and Game Recruitment are a multi-disciplined technical recruitment agency based in Chichester, West Sussex operating across the UK with specialist teams covering a range of industries.We are acting as a Recruitment Agency in relation to this vacancy, and in accordance with GDPR by applying you are granting us consent to process your data, contact you about the services we offer, and submit your CV for the role you have applied for.TPBN1_UKTJ

Job Title: Sheet Metal Worker \n Location: Crayford \n Salary: £17.00 - £20.00 per hour \n \n Sheet Metal Worker required to join a well-established company that specialize in prototyping and production of fine limit sheet metal work, precision CNC machining and welding to OEM customer specification, in particular to the Aerospace, Defence, Marine, Nuclear and Telecommunications industries. \n \n Key Responsibilities \n \n\n • Fine Limit Sheet Metal work (+/- 0.010")\n, • Flypress, Procam & Guillotine work\n, • Manufacture from technical drawings\n, • Working to a high standard, with an eye for detail\n\n \n Requirements \n \n\n • Fine Limit Sheet metal experience\n, • Previous experience within a similar position\n, • Must be able to read and interpret Engineering drawings\n, • Must live within a commutable distance of Dartford\n\n \n Salary & Further Information \n \n\n • Full time - Permanent position\n, • 40 hours per week (overtime available)\n, • £17- £20 per hour (DOE)\n, • 30 days holiday including BH\n, • Pension\n\n Bennett and Game Recruitment are a multi-disciplined technical recruitment agency based in Chichester, West Sussex operating across the UK with specialist teams covering a range of industries.We are acting as a Recruitment Agency in relation to this vacancy, and in accordance with GDPR by applying you are granting us consent to process your data, contact you about the services we offer, and submit your CV for the role you have applied for.

Bridge Recruitment is recruiting on behalf of our client for an experienced Sheet Metal Fabricator to join a busy and growing engineering team. The Role\n This is an excellent opportunity to work on interesting and varied engineering projects using modern equipment within a well-established workshop environment. Training will be provided for the CNC Brake Press where required. Skills & Experience Required\n To be successful in this role, candidates should possess the following skills and experience: \n\n • Relevant workshop experience, ideally within a precision sheet metal or plate environment working to tight tolerances\n, • Ability to read and interpret technical drawings\n, • General engineering workshop knowledge\n, • Experience working with aluminium, stainless steel, and mild steel\n, • CNC Brake Press experience desirable (training provided)\n, • TIG and MIG welding experience advantageous\n, • Excellent attention to detail and communication skills\n, • Ideally time served\nSalary & Benefits\n\n, • Competitive pay: up to £18 per hour\n, • Training and development provided\n, • Modern equipment and excellent staff facilities\n, • Interesting and varied project work\n, • Overtime available paid at time and a half\nWorking Hours\n\n, • Monday to Thursday: 07:30 - 16:00\n, • Friday: 07:30 - 14:00\nAnnual Leave\n\n, • 20 days holiday during the first year of service\n, • Increasing to 25 days thereafter\n, • Bank holidays in addition\n\n Apply today!

Job Title: CNC Miller- Programme, Setter, Operator \n Location: Crayford \n Salary: £17.00 - £20.00 per hour \n \n CNC Miller required to join a well-established company that specialize in prototyping and production of fine limit sheet metal work, precision CNC machining and welding to OEM customer specification, in particular to the Aerospace, Defence, Marine, Nuclear and Telecommunications industries. \n \n Key Responsibilities \n \n\n • CNC Milling - 3 & 5 Axis\n, • Setting and Operating\n, • Use of Heidenhain Controls\n, • Read and understand engineering drawings\n, • Monitor output and make necessary adjustments\n\n \n Requirements \n \n\n • Experience with CNC Milling - Setting, Operating & Programming\n, • Understanding of engineering drawings and working with tight tolerances.\n, • Must live within a commutable distance of Dartford\n\n \n Salary & Further Information \n \n\n • Full time - Permanent position\n, • 40 hours per week (overtime available)\n, • £17- £20 per hour (DOE)\n, • 30 days holiday including BH\n, • Pension\n\n Bennett and Game Recruitment are a multi-disciplined technical recruitment agency based in Chichester, West Sussex operating across the UK with specialist teams covering a range of industries.We are acting as a Recruitment Agency in relation to this vacancy, and in accordance with GDPR by applying you are granting us consent to process your data, contact you about the services we offer, and submit your CV for the role you have applied for.

Sheet Metal Worker required to join a well-established company that specialize in prototyping and production of fine limit sheet metal work, precision CNC machining and welding to OEM customer specification, in particular to the Aerospace, Defence, Marine, Nuclear and Telecommunications industries.

Job Title: CNC Miller- Programme, Setter, Operator.CNC Miller required to join a well-established company that specialize in prototyping and production of fine limit sheet metal work, precision CNC machining and welding to OEM customer specification, in particular to the Aerospace, Defence, Marine,

Key duties include: Completing servicing, inspections and general repairs Diagnosing electrical, mechanical and hydraulic faults Preparing vehicles for MOT testing Carrying out welding, fabrication and workshop equipment use Supporting apprentices and maintaining accurate job recordsRequirements N

Mechanical Site Supervisor (Authorised Person) Contract: Inside IR35 About the Role We are looking to strengthen our Construction team with a Mechanical Site Supervisor (Authorised Person) based in Beckton. Reporting to the Senior Commissioning Manager, you will be responsible for supervising and controlling all mechanical AP site activities, ensuring work is delivered safely, efficiently, to specification, and within programme. You will play a key role in maintaining quality standards, ensuring all inspections, testing, and documentation are completed throughout the project lifecycle. Key Responsibilities Support the Site Manager in maintaining a safe working environment for employees, subcontractors, and visitors. Achieve and maintain Authorised Person (AP) status through the company's Mechanical AP assessment process. Ensure all relevant Health, Safety and Environmental documentation is received, reviewed, and maintained at the latest revision. Carry out and manage mechanical isolations in line with project requirements. Manage and maintain Mechanical Inspection & Test Plans (ITPs). Review project documentation to ensure works are fully defined and understood before execution. Review and provide feedback on Method Statements and Work Instructions. Supervise works to ensure compliance with approved procedures and specifications. Monitor and record project progress using drawings and other reporting tools. Identify, record, and manage non-conformances and improvement opportunities, ensuring corrective actions are implemented. Ensure a high-quality installation is achieved with all ITPs completed as works progress. Experience Previous experience working within the Energy, Utilities, Water, or Industrial sectors. Strong understanding of pipework fabrication, welding, and mechanical installation. Ability to assess welding quality and inspect mechanical works. Experienced in snagging and punch-listing pipelines using Isometric, GA, and P&ID drawings. Previous experience operating in an Authorised Person (AP) role. Skills & Knowledge Strong understanding of mechanical installation and commissioning processes. Knowledge of inspection, testing, and quality assurance requirements. Ability to interpret technical drawings and project documentation. Excellent communication and site supervision skills. Commitment to maintaining the highest standards of health, safety, and quality. Qualifications HNC/HND in Mechanical Engineering, or Recognised apprenticeship in pipework and welding, supported by relevant industry experience. SSSTS CSCS Card First Aid qualification Essential: Must hold current Mechanical Authorised Person (AP) status Company information At First Recruitment Group we understand just how important it is to secure the right people. That is why our Recruitment Consultants always take the time to understand requirements in detail and offer sound advice to both clients and candidates. We actively recruit at all levels and this is a superb opportunity for any Site Supervisor looking for new employment. As part of putting people first, we strive to be an equal opportunities employer and we are always looking to increase the diversity of our workforce, working closely with our clients to ensure everyone is included. TPBN1_UKTJ

Minimum 2 years TIG welding experience in the Motorsport industry.

Location UAE (travel required to drift events, testing days, and motorsport activities) Employment Type Full-Time About the Role We are seeking an experienced, highly organized, and passionate Drift Crew Chief & Lead Technician to take full responsibility for the preparation, maintenance, setup, and race-day operation of two competitive drift cars supporting two drivers. This is a hands-on role requiring strong mechanical knowledge, attention to detail, and a deep understanding of drifting and vehicle dynamics. The successful candidate will ensure both vehicles are safe, reliable, competitive, and fully prepared at all times, allowing drivers to focus solely on performance. The ideal candidate lives and breathes motorsport, understands the demands of drift competition, and takes pride in delivering race-ready vehicles every time they leave the pit lane. Key Responsibilities Vehicle Preparation & Maintenance Manage the complete preparation and maintenance of two competition drift vehicles. Conduct thorough pre-event, post-event, and routine inspections. Perform servicing, repairs, and preventative maintenance. Ensure all mechanical systems are operating at the highest standard, including: Engine Transmission Differential Suspension Steering Braking systems Cooling systems Fuel systems Electrical systems Coordinate and schedule repairs, upgrades, and rebuilds as required. Competition Setup & Performance Prepare and configure vehicles according to driver preferences and event requirements. Set and monitor: Tire pressures Wheel torque specifications Suspension settings Ride height Alignment settings Corner weights (where applicable) Record setup changes and maintain vehicle setup logs. Assist in vehicle development and performance improvements. Driver Support Ensure both drivers are comfortable, safe, and properly positioned before every session. Check and adjust: Seat position Harness fitment Steering wheel position Pedal position Driver cooling and communication systems Conduct all pre-run and post-run driver checks. Race & Event Operations Lead all pit and paddock operations during events. Prepare vehicles for practice, qualifying, and competition runs. Manage tire inventory, tire changes, and pressure monitoring. Manage fuel levels and refueling procedures. Diagnose and resolve mechanical issues efficiently during events. Ensure both vehicles are ready for every scheduled session with minimal downtime. Safety & Compliance Ensure all vehicles meet motorsport safety requirements and event regulations. Inspect and maintain: Harnesses Seats Roll cages Fire suppression systems Battery isolators Safety equipment Ensure vehicles are scrutineering-ready at all times. Logistics & Inventory Maintain inventory of spare parts, tools, fluids, wheels, and tires. Prepare equipment and vehicles for transportation. Manage workshop organization and cleanliness. Coordinate parts procurement and supplier relationships. Reporting & Documentation Maintain service records and maintenance schedules. Track component life cycles and replacement intervals. Document setup changes, repairs, and driver feedback. Provide recommendations for performance, reliability, and operational improvements. Required Skills & Experience Proven experience in drifting, motorsport, circuit racing, rally, or high-performance vehicle preparation. Strong mechanical and diagnostic abilities. Solid understanding of vehicle dynamics and chassis setup. Experience working independently and under pressure during events. Ability to troubleshoot and repair vehicles quickly and effectively. Excellent organizational skills and attention to detail. Professional attitude and strong work ethic. Ability to travel and work weekends as required by event schedules. Preferred Qualifications Previous experience as a Crew Chief, Lead Mechanic, Race Technician, or Motorsport Technician. Fabrication and welding experience. Experience with motorsport data acquisition and logging systems. Understanding of alignment, suspension tuning, and drift vehicle setup. Forklift, trailer, or transport experience is advantageous. Personal Attributes We are looking for someone who: Takes ownership and accountability. Is proactive rather than reactive. Maintains exceptionally high standards. Works calmly under pressure. Is passionate about motorsport and drifting. Has a problem-solving mindset. Understands that attention to detail wins events. Success in This Role Success means both competition vehicles are consistently maintained, prepared, safe, reliable, and ready to perform at the highest level. Drivers should be able to arrive, suit up, and focus entirely on driving, knowing every aspect of vehicle preparation and race-day operations has been handled professionally. Compensation Competitive salary based on experience, skills, and motorsport background, with travel and event-related expenses covered. To Apply: Please submit your CV, relevant motorsport experience, and details of vehicles, teams, or racing programs you have previously supported.

Multi-Skilled Service Engineer Kent | £45,000 - £48,000 DOE + Company Van + Excellent Benefits Start Monday is recruiting on behalf of a well-established and growing engineering business for a Multi-Skilled Service Engineer to join their friendly and experienced team. This is an excellent opportunity for an engineer with both mechanical and electrical experience who enjoys a varied role. You'll split your time between visiting customer sites across the South East & London and working from the company's workshop near Maidstone, carrying out repairs, servicing and refurbishments on a range of specialist equipment. The company supplies and maintains machinery for customers within the butchery, hospitality, meat processing and medical sectors, offering a diverse and interesting workload. The Role • Service, repair and maintain specialist machinery at customer sites., • Carry out workshop-based repairs and refurbishments., • Diagnose and fault-find on both mechanical and electrical systems., • Deliver a professional and customer-focused service., • Participate in the on-call rota (1 week in 8). What We're Looking For Previous experience within an engineering environment is essential. An apprenticeship would be advantageous but is not essential. Mechanical experience should include: • Fault finding and repairs, • Replacing bearings and seals, • Rebuilding and fitting gearboxes Electrical experience should include: • Fault finding and repairs, • Reading electrical drawings, • Safe isolation of electrical systems, • Knowledge of single and three-phase power Experience with welding would be advantageous but is not essential. You will also need: • A full UK Driving Licence (ideally clean), • A positive attitude and strong problem-solving skills, • Excellent customer service and communication skills Salary & Benefits • £45,000 - £48,000 basic salary (depending on experience), • Company van, • Fuel card, • Tools provided, • In-house training and ongoing development, • Monday to Friday, 7:00am - 4:00pm (30-minute unpaid lunch), • On-call rota of 1 week in 8 with additional payments, • Long-term career prospects with a growing business If you're a multi-skilled engineer looking for a varied role with a supportive company that values its engineers, we'd love to hear from you. Apply today or contact Jo at Start Monday for a confidential discussion. JBRP1_UKTJ

Sheet Metal Worker required to join a well-established company that specialize in prototyping and production of fine limit sheet metal work, precision CNC machining and welding to OEM customer specification, in particular to the Aerospace, Defence, Marine, Nuclear and Telecommunications xsngvjr indu

An excellent opportunity for an experienced Panel Repair & Paint Technician to join a well-established company. Job Type: Full-Time, Permanent. Salary: Competitive Salary Per Annum, Depending on Experience / Skill Location: West Thurrock Schedule: Monday – Friday 7:00- 17:00 (45hrs per week) may be required to work additional hours, this may include Saturdays at time and a half. About The Company: Since 1986, The company has grown into one of the South East’s leading commercial Bodyshop groups, serving London, the M25 corridor, and surrounding areas. They combine decades of experience with the personal approach of a family-run business, ensuring every repair is carried out with care and professionalism. About The Role: The company are looking for enthusiastic, reliable, hardworking individuals with experience in Panel repair/paint within the vehicle repair industry to join their expanding team. Paint techs will be required to: The overall purpose with be to prepare repaired vehicles and loose panels for paint and to refinish the repaired vehicle and/or panels to a standard comparable to the original paintwork and in full accordance with professional standards of workmanship and vehicle road worthiness, including: • To use abrasives to prepare the repaired vehicle and any loose panels for paint, • To ensure that all refinishing is carried out professionally and to the customers satisfaction, using the correct paint and in line with the manufacturer’s specification, • To complete the quality control process sheet after each stage and before it moves to the next stage, • To identify and handle hybrid cars correctly, • To ensure that all work is completed on time and without the need of rectification, • Always look to improve working methods, subject to the managers approval, • Always wear and use appropriate PPE and equipment where and when required, • To comply with company repair and safe working methods, • All Health and Safety procedures including COSHH to be used at all times, • All other reasonable tasks to be carried out at the request of a senior manager Panel Techs will require to: • To repair and replace damaged vehicle bodyworks and loose panels professionally using the correct equipment and methods, • To ensure that the repairs are to the customers satisfaction and in line with the manufacturer’s specification, • To carry out joining techniques including bonding, welding and riveting, • To complete the quality control process sheet after each stage and before it moves to next stage, • To ensure that a technician certified in the discipline countersigns your quality control process sheet before it moves to next stages, • To handle and identify hybrid vehicles correctly, • To ensure all the work is completed on time and without the need of rectification, • Always look to improve working methods, subject to the managers approval, • Always Wear correct PPE and use correct equipment where and when to do so, • To comply with company repair and safe working methods, • All health and safety procedures, including COSHH adhered to at all times, • Any other reasonable tasks, as necessary to be carried out at the request of a senior manager If you feel that you have the relative skills/attributes to fulfil this role then please apply now for immediate consideration. The employer fully supports Equality in Employment. All employment is decided based on qualifications, merit and business need

Mobile Panel Beater / Mobile Panel Technician Location: Willingness to travel to various sites in the Southern region - Eastleigh, Chandlers Ford, Portsmouth, Eastbourne, Shoreham, Poole, Bournemouth and Basingstoke Salary: £54,600 (£21 per hour), increasing following successful completion of 6-month probation Hours: Monday to Friday, 7:00am - 5:00pm Company Vehicle: EV Company Car Provided Job Type: Full-Time, Permanent Ready to take your Panel Beater skills on the road and earn £54,600+ while enjoying an EV company car and Monday-to-Friday working? We're looking for an experienced Mobile Panel Beater / Panel Technician to support a network of busy Accident Repair Centres across the Southern region. This is a fantastic opportunity for a skilled Panel Beater who enjoys variety, wants greater autonomy, and is confident travelling between different repair sites. You'll be responsible for completing high-quality vehicle repairs across multiple locations, working with modern repair methods and technologies, including Hybrid and EV vehicles. What's in it for You? ·£54,600 Basic Salary (£21 per hour) ·Salary Increase Following Successful 6-Month Probation ·EV Company Car Provided ·Monday to Friday, 7:00am - 5:00pm ·25 Days Holiday Plus Public Holidays ·Pension Contributions ·Life Insurance ·Health Insurance and Virtual GP ·Employee Assistance Programme ·Health and Wellbeing Support ·Gym Discounts ·Retail, Restaurant and Cashback Discounts ·Discounted LV Insurance ·Cycle to Work Scheme ·Enhanced Family-Friendly Pay ·Refer a Friend Bonus ·Employee Recognition Rewards ·Team Event Budget ·Paid Breaks ·Ongoing Training and Career Development ·Modern Repair Facilities The Role As a Mobile Panel Beater, you'll travel between repair centres across the Southern region, carrying out high-quality body repairs and supporting sites with their workload. Your responsibilities will include: ·Repairing and replacing damaged vehicle panels to a high standard ·Carrying out panel alignment and adjustment ·Using MET skills to rebuild doors, front panels, and other vehicle components ·Welding and bonding replacement panels and components ·Applying fillers and sealants to prepare surfaces for refinishing ·Working on Hybrid and Electric Vehicles using appropriate repair methods ·Ensuring repairs are completed safely and in line with manufacturer standards ·Maintaining tools and equipment to a high standard ·Following all health and safety procedures and using PPE correctly ·Maintaining clean and organised working areas ·Completing repairs efficiently and within agreed timescales About You We're looking for an experienced Panel Beater who is confident working independently and travelling between multiple locations. You will ideally have: ·Proven experience as a Panel Beater / Panel Technician within an automotive repair environment ·Strong knowledge of modern vehicle repair techniques ·Experience with panel repair, replacement, welding, bonding, and MET work ·Experience repairing Hybrid and EV vehicles ·Excellent attention to detail and commitment to quality ·The ability to complete repairs from start to finish ·Strong organisation and time-management skills ·The ability to work effectively under pressure ·A positive and professional attitude ·Full UK Driving Licence ·Willingness to travel to Eastleigh, Chandlers Ford, Portsmouth, Eastbourne, Shoreham, Poole, Bournemouth and Basingstoke Apply Today This is a rare opportunity to take your Panel Beater career on the road, earning £54,600+ with an EV company car, while working Monday to Friday across a variety of modern repair centres. If you're an experienced Panel Beater looking for variety, excellent benefits, career development, and no weekend working, we'd love to hear from you. Apply now for immediate consideration

Job Description: Looking for a role that offers work-life balance, modern facilities, and long-term career development? This could be exactly what you've been waiting for. Why Join? Competitive Salary up to £60,000 per annum 4on 4off - Nights Join a high-performing, supportive team Work in a state-of-the-art workshop with modern equipment Access to industry-recognised training (IRTEC, LOLER, BPW & more) What You'll Be Doing Carrying out routine servicing, inspections, and preventative maintenance on a large fleet of trucks and trailers Diagnosing faults using schematics and advanced diagnostic equipment Completing repairs including fabrication, welding, soldering, and component assembly Using a variety of hand tools, power tools, and specialist equipment Maintaining accurate job records and ensuring compliance with health & safety standards Supporting the wider team in resolving mechanical and electrical issues efficiently What We're Looking For Essential: Level 3 in Heavy Vehicle Maintenance or 5+ years' experience in a similar role Strong mechanical and electrical knowledge Ability to read and interpret technical diagrams and schematics A proactive approach with strong problem-solving skills Desirable: Knowledge of heavy vehicle and plant maintenance standards Class 1 (C+E) Licence and/or FLT Licence Proficient in using hand tools, power tools. Excellent communication skills and the ability to work effectively within a team. Important Information: We endeavour to process your personal data in a fair and transparent manner. In applying for this role, NMS Recruit will be acting within your interest and will contact you in relation to the role, either by email, phone or text message. For more information see our on our website. It is important you are aware of your individual rights and the provisions the company has put in place to protect your data. If you would like further information on the policy or GDPR please get in touch with us

HGV Technician Location: Dagenham Salary: £55,903 per annum (£25.59 per hour) + Overtime Hours: 4 on, 4 off | Night Shift | 6:00pm - 6:00am Are you an experienced HGV Technician looking for a rewarding night shift role with excellent earning potential, outstanding benefits and long-term career development? We're recruiting for a skilled HGV Technician to join a busy workshop in Dagenham, maintaining and repairing a fleet of commercial vehicles. This is a fantastic opportunity to join a growing business that invests in its people through ongoing training, career progression and industry-recognised qualifications. What's on Offer: ·£55,903 basic salary (£25.59 per hour) ·Overtime paid at £35.55 per hour ·4 on, 4 off night shift pattern ·£1,000 Refer-a-Friend Scheme ·Retail discounts ·Cycle to Work Scheme ·Medical benefits ·Life assurance ·24/7 employee assistance programme ·Reward and recognition schemes ·Ongoing training and development The Role: ·Carry out servicing, inspections, maintenance and repairs on HGVs and trailers ·Diagnose and repair mechanical, electrical, hydraulic and electronic faults ·Prepare vehicles for MOT inspections ·Perform welding, fabrication and metalwork when required ·Order parts and assist with stores management ·Accurately complete job cards and maintenance records ·Support Apprentice Technicians and work collaboratively within the workshop ·Maintain workshop equipment to a high standard What We're Looking For: ·NVQ Level 3 in Heavy Vehicle Maintenance & Repair (or equivalent) ·Previous experience as an HGV Technician or Commercial Vehicle Technician ·Strong diagnostic and fault-finding skills ·Diagnostic qualifications desirable ·Excellent communication skills and a team-focused approach ·Commitment to delivering high-quality workmanship If you're looking for a well-paid night shift role with excellent benefits, ongoing training and genuine career progression, we'd love to hear from you. Contact Amy at Auto Skills UK quoting Reference: 54328 to find out more or apply today

Job title: Sheet Metal Fabricator Location: Dartford Salary: up to £18.00 per hour Hours: Monday to Friday, with an early finish on Friday! Our client: Our client is a well-established specialist in bespoke metal fabrication, delivering high-quality metalwork solutions across a range of sectors. The role: We are seeking a skilled and motivated Sheet Metal Fabricator to support with the manufacturing, assembling and finishing of metalwork components, ensuring all work meets quality and safety standards. Benefits: • 20 days annual leave (increasing to 25 days) + bank holidays OT paid at x1.5 Company pension Key responsibilities would be: • Fabricate sheet metal components from technical drawings and specifications. Cut, bend, shape and assemble materials using hand tools and machinery. Operate fabrication equipment such as press brakes. Carry out MIG and TIG welding. Inspect finished products to ensure quality standards are met. * Work with a variety of metals including steel, stainless steel and aluminium. Experience and skills required: • Proven experience in sheet metal fabrication Ability to read and interpret technical drawings Skilled in the use of fabrication machinery and hand tools MIG/TIG welding experience Strong attention to detail Ability to work independently and as part of a team Reliable, punctual and proactive Next steps: If this sounds like the ideal position for you and you have the experience outlined above, then please apply and you will be contacted by a member of our team if your CV matches our requirements. New Appointments Group, Expertly Matching Employers and Jobseekers since 1975. We are committed to fostering a diverse and inclusive environment in line with the Equality Act 2010. All qualified applicants will be considered regardless of age, disability, gender reassignment, marriage or civil partnership, pregnancy or maternity, race, religion or belief, sex, or sexual orientation. New Appointments Group acts as an Employment Agency for permanent roles and as an Employment Business for temporary roles.

Panel Beater role: Basic Circa £60,000 per annum + Bonus Monday - Friday 45 hours Flexible Start Finish Times Permanent Role I am looking for an experienced Panel Beater to join a leading Bodyshop in the Belvedere area. Key Panel Beater Roles and Responsibilities: Carry out precise vehicle body repairs using body alignment jigs and specialist equipment. Restore damaged panels through expert straightening, reshaping, and filling techniques. Remove and replace damaged panels to manufacturer and industry standards. Perform welding, bonding, and structural repair work on a wide range of vehicles. Complete body shell removals and replacements where required. Identify and record all parts required for repairs, ensuring accuracy throughout the repair process. Work efficiently while maintaining the highest standards of quality and safety. Minimum Requirements as a Panel Beater: Time-served Panel Beater or qualified to City & Guilds, NVQ, or equivalent vocational standard. ATA accreditation would be advantageous but is not essential. Strong attention to detail with the ability to consistently produce high-quality repairs. Ability to work effectively both independently and as part of a busy Bodyshop team. A positive attitude and commitment to delivering outstanding workmanship. If you want to hear more about the Panel Beater role, please send us your CV by clicking ‘apply now’ or by contacting Piam Pishgoo on (phone number removed) / (url removed) to discuss further

MAINTENANCE ENGINEER - EAST LONDON Monday to Friday DAYS | 37.5 HOURS | £57,000 + BONUS Excellent Pension | Overtime | Extensive Training | Career Progression AT A GLANCE £57,000 salary + bonus Monday to Friday days - 7am to 3pm 5 hours per week Optional overtime at an excellent rate Excellent pension scheme Global manufacturing business Superb reputation within its industry Long-serving engineering and operational workforce Significant investment in employees, training and technology Extensive additional training available Opportunities to progress into Leadership, Reliability and Controls East London Heavy industrial / process / manufacturing experience requiredTHE OPPORTUNITY Are you an experienced Maintenance Engineer looking for a Monday to Friday days role with a global business that genuinely invests in its people? We are working with a highly respected global manufacturing organisation with a superb reputation within its industry. This is a business that has a genuine long-term approach to its employees, with many people having built significant careers within the company. The organisation invests heavily in training, development and career progression. As a Maintenance Engineer, you will have access to additional technical training, including further electrical courses, PLC training and welding qualifications. There are also clear opportunities to develop your career beyond the traditional Maintenance Engineer position, with potential progression into engineering leadership, reliability engineering or controls-focused roles. This is an excellent opportunity for a Maintenance Engineer who wants to join a stable, successful business where people are valued, developed and encouraged to progress. THE ROLE As a Maintenance Engineer, you will be part of a multi-skilled engineering team responsible for maintaining and improving a demanding industrial production environment. You will be involved in both planned and reactive maintenance, helping to maximise equipment reliability and minimise production downtime. Key responsibilities will include: Carrying out planned preventative maintenance Responding to and repairing equipment breakdowns Electrical and mechanical fault finding Maintaining large-scale industrial and process equipment Working with pumps, motors, gearboxes and pneumatic systems Diagnosing faults and implementing effective repairs Identifying recurring equipment issues Supporting root cause analysis and permanent corrective actions Contributing to continuous improvement projects Working to engineering KPIs and site standards Supporting improvements to equipment reliability and performance Working closely with Production and other engineering disciplines Maintaining high standards of health and safetyTHE ENVIRONMENT This is a heavy industrial and process environment rather than a light manufacturing operation. The engineering team works with substantial industrial equipment and machinery, making this particularly suited to engineers who have worked in demanding industrial environments. Relevant backgrounds could include: Water treatment i.e. Thames Water, Anglian Water, Essex & Suffolk Water, SSE Water Aggregate manufacturing Chemicals Manufacturers Quarrying Mining Tarmac and asphalt manufacturing Waste-to-energy Waste recycling Mills and heavy processing Marine and shipping Heavy manufacturing Process manufacturing Other heavy industrial environmentsABOUT YOU We are looking for a hands-on Maintenance Engineer with a strong heavy industrial, process or manufacturing background. You will ideally have: A Mechanical or Electrical Engineering qualification, apprenticeship or equivalent experience Strong hands-on maintenance experience within a heavy industrial environment Electrical or mechanical bias with the ability to work across disciplines Experience maintaining large-scale industrial machinery and equipment Strong electrical and/or mechanical fault-finding skills Good diagnostic and problem-solving ability A proactive approach to maintenance and continuous improvement Good communication and teamwork skills A willingness to learn and develop technically An interest in automation, controls, reliability or engineering improvement The ambition to develop your career within a long-term organisationABOUT THE COMPANY This is a global manufacturing business with a superb reputation within its industry and a long-standing commitment to its people. The company genuinely invests in its employees, with extensive training and development available to help people build their technical skills and progress their careers. The long service across the business is a real reflection of the culture. Many employees have been with the organisation for many years, with people able to build long-term careers rather than constantly looking for their next move. For the right Maintenance Engineer, this provides the opportunity to join a business where your development is taken seriously and where there are multiple routes for progression. Maintenance Engineer is commutable from East Ham, West Ham, Plaistow, Beckton,,Stratford, Canning Town, Barking, Ilford, Leyton, Leytonstone, Wanstead, Woodford, South Woodford, Walthamstow, Chingford, Enfield, Edmonton, Ponders End, Southgate, Waltham Cross, Dagenham, Rainham, Romford, Hornchurch, Upminster, Erith, Belvedere, Abbey Wood, Thamesmead, Woolwich, Plumstead, Bexleyheath, Welling, Sidcup, Dartford, Crayford, Gravesend, Grays, Purfleet, Aveley, Tilbury, Chafford Hundred, Brentwood, Shenfield, Billericay, Basildon, Laindon, Loughton, Epping, Waltham Abbey. For more information on Maintenance Engineer please apply or call Simon (phone number removed) or email (url removed) Proactive Global is an industry leading, specialist engineering recruitment agency focused on the automation, manufacturing and advanced technology sectors. We offer specialist recruitment services to a niche customer base, vetting that our clients offer the best opportunities for your career. Proactive encourages and promotes equality and diversity within the workforce. We act with honesty, integrity and impartiality, ensuring your application is considered on its own merits and without bias. When registering with Proactive you will have the opportunity to apply for some of the most interesting, specialist, opportunities in the marketplace, with the biggest companies in the sector. Follow us on Linkedin and Facebook for industry news and download our app for live notifications about newly listed vacancies. We look forward to helping you find your next role! Proactive Global is committed to equality in the workplace and is an equal opportunity employer. Proactive Global is acting as an Employment Business in relation to this vacancy

JOB TITLE: Electrical / Mechanical Service Engineer - Robotics Welding Systems. We are a leading robotics welding company and are looking to recruit an experienced Electrical / Mechanical Service Engineer to join our growing team. This is an exciting opportunity to work with advanced robotic welding

Murphy & Sons Ltd is seeking a SWSS/PTS Quality Advisor to support energy projects from our Leeds facility, ensuring welding and pressure testing are performed to approved procedures and client specs.

Industry experience in welding & fabrication. Welding & Fabrication Tutor – West Yorkshire. We are looking for a skilled welding & fabrication tutor to join our engineering department.

Welding Technician Job Overview High-end production welding using a variety of TIG & MIG welding equipment Following drawings to produce weld assemblies to a high standard Preparing products for painting, ensuring metal components are clean and scratch free Responsibility for maintaining stock of we

Boston Rose invites applications for a Welding & Fabrication Tutor in West Yorkshire. This full-time, permanent role focuses on delivering workshop-based welding training and conducting vocational assessments within the engineering department.

Welding operative performing microscopic assembly and soldering of temperature sensor components. Requires fine welding skills and ability to read engineering drawings.

Do not wait to apply after reading this description a high application volume is expected for this opportunity.Expected to travel up to London.Junior Contracts Manager to work on projects in the Portsmouth area and will be required to travel up to London.As an Junior Contracts Manager you will be re

Seeking a College Assessor Trainer to train and assess Welding & Fabrication for students, maintain workshops, and liaise with employers.

Inspects welded and fabricated components, using measurement tools and checking against engineering drawings.

Job Title: Welding Field Engineer - Surveillance.

Job Title: Field Engineer (Welding/Mechanical).

Carry out MIG/MAG welding where required. MIG/MAG welding experience is highly beneficial. Coded welding qualifications are advantageous.

Plater / Fabricators | Liverpool Bay Decommissioning Project | August & September 2026.Copius Group is mobilising two experienced offshore teams for a major decommissioning project in Liverpool Bay, and we’re looking to connect with skilled professionals ready for upcoming trips in August & Septem

Park & Play Infrastructure Supervisor.The following information provides an overview of the skills, qualities, and qualifications needed for this role.Location: Bromley Borough, reporting to High Elms Country Park.Contract Type: Permanent, Full-time.Working Hours: Monday to Friday, 7am to 3:30pm

Lead the Way as a Children's Residential Team Leader Ready to take the next step in your career? At Wilderness Way, leadership is about more than managing shifts.It's about creating an environment where children can feel safe, valued and supported to achieve their potential.As a Team Leader, you'l

ClearRoute is an engineering consultancy bridging Quality Engineering, Cloud Platforms and Developer Experience.We help enterprises reliably bring high-impact digital products to market faster, cheaper, and safer, working with technology leaders facing complex business challenges.We take as much pri

MAK Technologies is seeking an Office Manager to join our team.The job is 100% onsite, located in the Alewife/Fresh Pond area of Cambridge, MA.This role is an hourly, contract role with an expectation of working around 25 hours/week for three months.At the end of the three months, the person will

Sales Manager (France & Benelux) Our client is a well-established manufacturer of high-quality material solutions engineered for comfort, performance and durability.Their diverse product range supports multiple industries including furniture, bedding, construction, transport, and healthcare.Our cli

We are seeking a proactive and detail-oriented Office Manager to join our growing team at Kings Hill.This is a broad, hands-on role covering Finance, People and Culture, and Office Management with scope to grow as the business expands.You will play a key role in ensuring the smooth day-to-day ru

Office Manager Location: Near Filey, North Yorkshire Job Type: Full-time, Permanent Working Hours: Monday-Friday (early finish on Friday) Salary: £30,000 About the Role We are looking for an organised, people-focused and proactive Office Manager to join our client’s manufacturing busine

Office Manager (Manufacturing / MRP Systems) in Colchester (CO1) | Ernest Gordon Recruitment Search Search These jobs were popular with other job seekers Product File Administrator Just Recruitment Group Ltd Colchester (CO1) Discussed on application 3 days ago Office Manager LJ Recruitment Limited M

Our client is a market-leading UK manufacturer of fire & smoke protection systems, trusted by tier 1 contractors and developers.A broad, hands-on role at the centre of a fast-growing, innovation-led SME.You will own the day-to-day running of the business: office administration, bookkeeping and finan

Technical Co-Ordinator/Manager in Bishop's Stortford (CM22) | Gap Construction Search Search These jobs were popular with other job seekers Quality Assurance Manager Thales Group South East Competitive 17 hours ago NEW Contract Manufacturing Director BD Pharmaceuticals South East Competitive 1 month

I am recruiting for an established and highly regarded grab hire, muck-away, and aggregate supply company based in Gloucester, with over 15 years' experience serving domestic and commercial construction clients across Gloucestershire.Known for reliability, efficiency, and excellent customer service,

Management Accountant - North Suffolk (Onsite) Keeler Recruitment are delighted to be supporting this established family owned business, who are looking appoint a Management Accountant on a permanent, full time basis located in the heart of North Suffolk.You will be working closing with the Finan