Aerospace manufacturing jobs in Linden, New JerseyCreate job alerts

Job DescriptionJob Title: Quality InspectorJob Description We are seeking a diligent Quality Inspector to ensure that all customer requirements are understood and met with precision. This role involves reviewing customer purchase orders, conducting audits, and interacting with various departments to ensure product conformance. The Quality Inspector will play a crucial role in maintaining the highest standards of quality and compliance. Responsibilities • Review customer purchase orders to ensure understanding of customer requirements and facility capabilities., • Initiate and participate in corrective/preventive actions from audit findings, customer complaints, and product/process issues., • Perform audits of internal products/processes and vendors, and assist with external quality audits., • Interact with other departments and customers to ensure product conformance., • Ensure product, process, and service conformance to customer and regulatory requirements., • Use tools, gauges, and measuring equipment to verify coating thickness, location, and part dimensions., • Verify completion and documentation of required operations on the router., • Perform visual inspections for defects like cracks, chips, and scratches, ensuring good workmanship., • Document inspection results and maintain quality records according to procedures., • Identify product defects and ensure nonconforming parts are managed appropriately., • Verify product returns from outside processing and review vendor certifications., • Check product identification and ensure part numbers and quantities match customer paperwork., • Review and ensure the accuracy of certificates of conformance before signing., • Perform additional duties necessary to ensure product conformance.Essential Skills, • Experience with ISO 9001 standards., • Experience in the manufacturing industry., • Quality control knowledge and experience., • Proficiency in using calipers, micrometers, and other measuring tools., • Ability to perform visual inspections., • Experience with shipping and receiving., • Strong documentation skills.Additional Skills & Qualifications, • Lean Six Sigma knowledge is advantageous., • Compliance with minimum near vision requirements (Snellen 14/18 or Jaeger 2). Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Springfield,NJ. Application Deadline This position is anticipated to close on Apr 10, 2026. About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description CNC MILL MACHINIST / SET UP - All Shifts -- Manufacturing/Machine Shop N.J. Precision Technologies, Inc. – Mountainside, NJ Job Description PLEASE READ BEFORE APPLYING: • MINIMUM 5 YEARS SET-UP EXPERIENCE - CNC MILLING or TURNING SET-UP EXPERIENCE REQUIRED, • FULL TIME : FIRST SHIFT, SECOND SHIFT, THIRD SHIFT, WEEKEND SHIFTS AVAILABLE, • ALL HAAS CNC MACHINES and Kitamura, • STRONG WORKING KNOWLEDGE OF SET-UP TECHNIQUES FOR PRODUCTION AND PROTOTYPE., • STRONG WORKING KNOWLEDGE OF CNC PROGRAMMING AND EDITING WITH G & M CODES OR PROGRAMMING SOFTWARE., • ABILITY TO SET-UP & OPERATE USING VICES OR SIMILAR TOOLING HARDWARE AND FIXTURES., • MUST HAVE EXPERIENCE INSPECTING PARTS AND READING MICROMETER , CALIPER, HEIGHT GAGE AND DIAL INDICATOR, • BLUEPRINT READING A MUST. Responsibilities • Performs SET UP, PROGRAM TEST, FIRST PIECE "PROVE-OUT" RUN, in-process inspections, and CNC of precision-machined parts., • Works with production and engineering teams to address and resolve production issues in CNC Milling., • Responsible for selecting correct tooling hardware and measurement equipment., • Responsible for ensuring that the machines are well maintained ., • Working in accordance with ISO requirements., • Education: High school diploma or GED., • Experience: Minimum 5 years CNC Machining / Milling experience in a machine shop or manufacturing environment., • Measurement and inspection skills a must., • Strong knowledge of Blueprint reading with GD&T required., • Must have a strong aptitude in mechanical blueprints and drawings, • Must have a working knowledge of CAD systems., • Must be very detail oriented., • Strong math skills., • Ability to follow process plans, routers and inspection plans., • Has a strong background with workplace safety, OSHA regulations., • Must be able to effectively communicate with employees of varying education levels., • Comfortable working with very tight , "tenths" tolerances., • Must be experienced in measuring tools such as micrometers, calipers, height gage, dial indicators. 1.0 JOB DESCRIPTION SUMMARY 1.1 This position establishes the authority, reporting relationships, tasks and duties with performance standards for the CNC Specialist. 2.0 JOB TITLE 2.1 CNC Specialist 3.0 REPORTING RELATIONSHIPS 3.1 The CNC Specialist reports to the CNC Manager. 4.0 REQUIREMENTS 4.1 Education Required: High School diploma or GED. Preferred: Vocational School Certificate / Associates degree in Mechanical, MFG, IND Engineering technology. 4.2 Licensing, Registration, and certification Required: None. Preferred: None. 4.3 Experience Required: A minimum of one year experience in CNC or tooling production. 4.4 Skills, Knowledge, Abilities 4.4.1 Must have strong math skills. 4.4.2 Ability to read and understand engineering drawings. 4.4.3 Must be able to effectively communicate with other employees of varying education levels. 4.5 Physical Requirements 4.5 The physical requirements are stressful with the majority of time spent standing working with machinery. This position requires manual dexterity of the hands and the normal bending and twisting associated with plant operations. Walking, turning the head and torso, reaching, grasping, bending, stooping, kneeling and flexing the arms, legs, wrists, and fingers and the ability to lift at least forty (40) pounds. Must be able to work in areas with moderate to high noise levels. Must be able to constantly kneel, squat, climb and have full bending abilities at the waist (touch the toes). The body senses of sight (not color blind), hearing (safety) is required. Good vision to read diagrams and business documents. Must be able to wear safety glasses and hearing protection for prolong periods of time. 4.6 Mental: Basic math skills, mechanical engineering understanding, blueprint reading, as well as reading, writing and spelling and the ability to communicate clearly and effectively in English. 5.0 WORKING CONDITIONS 5.1 The majority of the time (95%) will be spent in a non-smoking plant environment. Temperatures will remain consistent throughout the year. Noise levels will be high in the plant area and moderate in the office area. Work hours will be dependant upon the weekly production and shipping schedules. Work hours may be long when specific projects are due, therefore, some extended schedules will be necessary. 6.0 TASKS AND DUTIES 6.1 Responsible for the proper operation of the machines. 6.2 Responsible for performing the daily machine set up process – clean the machine, complete the set up the machine for the first job. 6.3 Responsible for producing high quality finished products in accordance with the customer’s requirements. 6.4 Responsible for completing the job within the allotted job budget dollars. 6.5 Completes the bead blasting process when necessary. 6.6 Responsible for the proper operation and maintenance of the machines. Ensures the machine is maintained on a preventative basis. 6.7 Responsible for the machine programming functions. 6.8 Responsible for performing a quality control check on all jobs. 6.9 Responsible for setting up the machines for optimized speed and performance. 6.10 Responsible for completing the work in a safe manner. 6.11 Responsible for ensuring the shop area is clean and organized. 6.12 Responsible for accurately recording the time spent against the appropriate job. 6.13 Responsible for completing the work in accordance with ISO 9000 standards. 6.14 Responsible for working closely with the Manager with the development and implementation of the agreed upon training plan and schedule. 6.15 Ensures personal adherence to the company policies and practices. 6.16 Performs any other duties as may be assigned by the Manager. 7.0 MEASUREMENTS OF PERFORMANCE 7.1 Ability to produce each job in accordance with the customer’s requirements. 7.2 Ability to produce each job in accordance with the allotted number of production hours and optimize. 7.3 Ability to set-up as per the plot/print/router/set-up sheets in a timely manner. 7.4 Ability to edit programs (G & Mo codes and/or Mastercam) for efficient and practical parts production. 7.5 Ability to transmit program from database to local PC and to machines. 7.6 Ability to account and record the hours spent per job. 7.7 Consistently maintains the work area in a clean, organized and professional manner – ie: clean floors, machines, tools secured, etc. 7.8 Ability to work with minimal supervision. 7.9 Ability to service and maintain the machines to eliminate/minimize machine downtime 7.10 Ability to adhere to the company’s policies and procedures. 7.11 Has demonstrated a working knowledge level of the standard operating procedures as defined by ISO 9000. 7.12 Ability to work within the company’s safety practices and procedures. 7.13 Ability to complete the assigned training schedule. Company DescriptionNew Jersey Precision Technologies, Inc. is a high-tech Manufacturer located in Mountainside, New Jersey. We specialize in electrical discharge machining (EDM) and precision manufacturing of all mechanical components for the aerospace and medical device industries as well as tooling for the plastics industry and stamping industry. Our modern facility is fully climate controlled and utilizes more than 60 EDM and CNC machines. Our EDM & CNC departments are running 24 hours per day, 7 days per week. Our CNC Lathe, CNC Mill, Sinker EDM, Wire EDM & Small Hole Drilling EDM machines are state-of-the-art and the latest generation available. Our CNC Technicians and Electrical Discharge Machining technicians perform CNC Programming, CAD, Automated Set-ups and efficient production & prototype operations. NJPT believes in continual improvement programs including continual employee training programs. In addition to off sight custom training, in-house training and other learning methods, NJPT offers a complete tuition reimbursement program from those FULL-TIME individuals who may want to earn or complete a college degree. The NJPT FULL-TIME benefits package is outstanding with matching 401K retirment plan, profit sharing, Medical plan, Prescription plan, Dental & Optical plans, Credit Union, etc. NJPT is a US Department of Defense contractor and controlled by ITAR (International Traffic in Arms) government regulations to only hire citizens of the United States or those individuals with a US permanent resident green card. An equal opportunity employer, NJPT is committed to its employees and employee satisfaction. NJPT is a great place to work and a great place to grow. Please visit our Website: Jersey Precision Technologies, Inc. is a high-tech Manufacturer located in Mountainside, New Jersey. We specialize in electrical discharge machining (EDM) and precision manufacturing of all mechanical components for the aerospace and medical device industries as well as tooling for the plastics industry and stamping industry. Our modern facility is fully climate controlled and utilizes more than 60 EDM and CNC machines. Our EDM & CNC departments are running 24 hours per day, 7 days per week. Our CNC Lathe, CNC Mill, Sinker EDM, Wire EDM & Small Hole Drilling EDM machines are state-of-the-art and the latest generation available. Our CNC Technicians and Electrical Discharge Machining technicians perform CNC Programming, CAD, Automated Set-ups and efficient production & prototype operations. NJPT believes in continual improvement programs including continual employee training programs. In addition to off sight custom training, in-house training and other learning methods, NJPT offers a complete tuition reimbursement program from those FULL-TIME individuals who may want to earn or complete a college degree. The NJPT FULL-TIME benefits package is outstanding with matching 401K retirment plan, profit sharing, Medical plan, Prescription plan, Dental & Optical plans, Credit Union, etc. NJPT is a US Department of Defense contractor and controlled by ITAR (International Traffic in Arms) government regulations to only hire citizens of the United States or those individuals with a US permanent resident green card. An equal opportunity employer, NJPT is committed to its employees and employee satisfaction. NJPT is a great place to work and a great place to grow. \r\nPlease visit our Website:

Job Description At Valcor Engineering Corporation, we design and manufacture advanced fluid control components and systems for the aerospace, nuclear, and scientific industries. Our team is dedicated to innovation, precision, and quality—values that have made us a trusted name for over 70 years. Join a company that’s shaping the future of aerospace technology, one part at a time. Position Summary: We are currently seeking an experienced Deburrer to join our manufacturing team. In this role, you’ll play a critical part in the final preparation of precision aerospace components by removing imperfections and ensuring all parts meet rigorous quality standards. Under general supervision working from blueprints, sketches, verbal and/or written specifications, operates and adjusts manual or numerically controlled machine tools to perform standard and repetitive sequence of operations. Additional job duties are as follows: • Sets up manual machines where speeds, feeds and sequences of tooling operations are ordinarily prescribed, • Operates numerically controlled machines where programs are approved and setups are made and maintained by others., • Removes burrs and rough edges from machine component parts using a variety of hand operations, such as; filing, deburring and performing polishing operations., • Removes scratches, burrs and tool marks from parts, using microscope or magnifier., • Uses standard shop measuring devices., • Sharpens drill tools on grinding wheel as necessary., • Operates automatic welding equipment., • Moves parts and materials to and from work area., • Maintains good housekeeping in work area., • Minimum 4 years of experience in a general machine shop environment, • Skilled in deburring and hand-finishing aerospace or high-precision components, • Familiarity with using microscopes or magnifying equipment for detailed work, • Able to read and interpret blueprints and technical drawings, • Experience operating manual shop tools and measuring devices, • Strong eye for detail and commitment to quality, • Dependable, safety-conscious, and team-oriented Salary Range:$29.56 To $33.62 Hourly Why Join Valcor? ✅ Competitive pay & benefits package ✅ Work with cutting-edge aerospace technology ✅ Collaborative, clean, and safety-first work environment ✅ Long-standing company with stability and growth opportunities ✅ Convenient location: 2 Lawrence Road, Springfield, NJ 07081 Job location is at 2 Lawrence Road, Springfield, NJ 07081 Please note: The salary range is based on our market pay structure. However, individual salaries are determined by a variety of factors including, but not limited to, business considerations, local market conditions, and internal equity, as well as candidate qualifications, such as skills, education, and experience. Employee Benefits: At Valcor Engineering, we support our employees in all aspects of their life, including their health and financial well-being. Regular employees scheduled to work 30+ hours per week are offered: health, dental, and vision insurance; health savings accounts; a 401(k) savings plan; long term disability coverage; and life and accident insurance. We also have an employee assistance program. Our leave programs include Vacation and PTO time off, paid holidays, as well as other types such as bereavement, and any applicable federal and state sick leave. Employees may participate in the company recognition program to receive monetary or non-monetary recognition awards. We are an equal opportunity employer and do not discriminate on the basis of race, color, religion, sex, national origin, age, disability, genetic information, veteran status, sexual orientation, gender identity, or any other characteristic protected by law. All qualified applicants will be considered for employment without regard to these characteristics. We're an equal opportunity employer. All applicants will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran or disability status. Company DescriptionValcor Engineering is one of the largest and most recognized suppliers of fluid control products in the aircraft, aerospace and military fields. We specialize in the design and manufacture of Solenoid Valves and control components for liquids and gases in critical application in the aerospace, nuclear, light industrial and scientific industries.Valcor Engineering is one of the largest and most recognized suppliers of fluid control products in the aircraft, aerospace and military fields. We specialize in the design and manufacture of Solenoid Valves and control components for liquids and gases in critical application in the aerospace, nuclear, light industrial and scientific industries.

Experience supporting audits or financial reporting in regulated industries. Controller - Manufacturing (Aerospace / Highly Regulated Industry). This position reports directly to senior finance leadership and plays a key role in strengthening financial controls, improving cost visibility, and suppor

Job Description JOB SUMMARY Under immediate supervision, working from blueprints, sketches, verbal and/or written specifications, operates manual or numerically controlled machine tools to perform standard sequences of operations. Sets up manual machines where speeds feeds and sequence of tooling operations are ordinarily prescribed. ESSENTIAL FUNCTIONS: • Sets up manual machines where speeds feeds and sequence of tooling operations are ordinarily prescribed, • Operates numerically controlled machines where programs are proved., • Sets up and operates other manual machines in the work area and maintains tolerances by adjusting as necessary., • Is responsible for inspecting the work to ensure it meets basic quality requirements., • Can perform detailed sub-assembly functions for certain products., • Operates automatic welding equipment., • Uses required shop measuring devices., • Sharpens drill tools on grinding wheel as necessary., • Maintains good housekeeping in work area., • May be required to perform other duties as directed by supervision. MINIMUM QUALIFICATIONS • 5-7 years’ experience as a general machine shop operator and demonstrated skills., • Familiar with Machine Shop procedures, special processes, and tooling. REQUISITE SKILLS REQUIRED • Demonstrated effective verbal and written communication skills., • All work is performed under the minimum supervision of the Manager and/or Supervisor, as required. EQUIPIMENT/MACHINERY USED • Knowledge of Machining or Manufacturing operations is beneficial. PHYSICAL REQUIREMENTS • Lifting up to 50lbs regularly, pushing, pulling, standing for long periods of time, manual dexterity, visual acuity, and typing. All candidates must meet the US persons criteria. Please note: The salary range is based on our market pay structure. However, individual salaries are determined by a variety of factors including, but not limited to, business considerations, local market conditions, and internal equity, as well as candidate qualifications, such as skills, education, and experience. Employee Benefits: At Valcor Engineering, we support our employees in all aspects of their life, including their health and financial well-being. Regular employees scheduled to work 30+ hours per week are offered: health, dental, and vision insurance; health savings accounts; a 401(k) savings plan; long term disability coverage; and life and accident insurance. We also have an employee assistance program. Our leave programs include Vacation and PTO time off, paid holidays, as well as other types such as bereavement, and any applicable federal and state sick leave. Employees may participate in the company recognition program to receive monetary or non-monetary recognition awards. We are an equal opportunity employer and do not discriminate on the basis of race, color, religion, sex, national origin, age, disability, genetic information, veteran status, sexual orientation, gender identity, or any other characteristic protected by law. All qualified applicants will be considered for employment without regard to these characteristics. Salary Range: $26.29 To $30.79 Hourly Company DescriptionValcor Engineering is one of the largest and most recognized suppliers of fluid control products in the aircraft, aerospace and military fields. We specialize in the design and manufacture of Solenoid Valves and control components for liquids and gases in critical application in the aerospace, nuclear, light industrial and scientific industries.Valcor Engineering is one of the largest and most recognized suppliers of fluid control products in the aircraft, aerospace and military fields. We specialize in the design and manufacture of Solenoid Valves and control components for liquids and gases in critical application in the aerospace, nuclear, light industrial and scientific industries.

Job Description This is a rare chance to join our client, a globally recognized aerospace manufacturer, a company that has spent 75+ years pushing the boundaries of turbine engine technology. Consistently ranked among the world's best employers, this publicly traded organization backs that reputation with a culture that genuinely prioritizes its people. What's in it for you? • Stability and momentum — a growing public company with deep industry leadership, • Benefits that start on day one: premium health coverage and a 9% 401(k) match — one of the strongest in the industry, • Employer-funded retirement savings contribution each pay period, • A workplace culture built around collaboration, inclusion, and continuous improvement, • Structured development programs to help you grow into your next role Job Summary: The selected candidate will report to the Plant Manager and provide managerial and leadership support to the Procurement and Supply Chain Team to ensure Business Unit goals are met through the execution of procurement strategies. Procurement strategies include but are not limited to the security of supply, cost savings, optimization of processes, and supplier risk mitigation. The overall goal is to support production schedule while obtaining the best achievable value for supplies and services while maintaining compliance with company procedures. Environmental Health & Safety Responsibilities: • Expected to assist in the implementation of company EHS value and policy statement and its accompanying principles., • Comply with all department, facility, corporate, and regulatory EHS regulations., • Wear all required personal protective equipment., • Report all job-related illnesses and injuries (per employee handbook)., • Report all Safety, Health & Environmental concerns to your supervisor promptly., • Directly responsible for the overall Plant procurement operations which includes direct, indirect, and Capital spend., • Provide guidance and leadership to Plant Procurement Specialists and Supply Chain Planners., • Collaborate with the value stream (Operations, Maintenance, Engineering, Quality, Finance, etc.) to ensure procurement strategies align with Plant and BU goals., • Share savings targets of plant-specific spend with Location Management, Category Management, and stakeholders., • Manage supplier sourcing, negotiations, contracting, and the execution of agreements to support plant requirements., • Monitor supplier performance and place countermeasures to resolve any issues that may arise., • Communicate supplier issues to BU Procurement, Category Management, and Quality., • Review Plant Procurement metrics and take the necessary actions to ensure Plant and BU targets are met., • Responsible to ensure Procurement retains compliance with all auditing agencies., • Ensure the successful execution of ERP-related procurement processes including system enhancement implementations., • Responsible for Raw Material forecasting, inventory management, cost management, and researching potential BOM issues affecting inventory accuracy., • Oversee ERP item and raw material transactional activity to drive inventory accuracy — including accurate cycle count program monitoring and maintenance for raw materials., • Manage project-related teams and plant procurement and supply chain initiatives. BASIC QUALIFICATIONS: • Bachelor's degree from an accredited institution in Business, Management, Supply Chain, Logistics, IT, Politics, Policy, Finance, Accounting, Data Science/Analytics, Marketing/Communication, Economics, Mathematics, or Engineering., • Minimum 6 years' experience in Procurement or Supply Chain., • Knowledge and understanding of procurement and financial best practices and compliance (Sarbanes-Oxley, UCC Laws, Import/Export Laws, etc.)., • Employees must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. Visa sponsorship is not available for this position., • Procurement experience working in a fast-paced manufacturing environment., • Ability to write and negotiate complex contracts for the obtaining of goods and services., • Experience in Oracle or a similar type of Enterprise Business System., • Willingness to frequently visit the shop floor for a better understanding of Plant operations., • Customer-oriented personality. Augmentis is a specialized recruiting firm focused on accounting, finance, procurement, and engineering talent across the U.S. We partner with growthoriented companies to match highimpact professionals with meaningful roles. To learn more about Augmentis, visit our website: Representation/employer clarification: This search is being conducted by Augmentis on behalf of our client. The selected candidate will be employed directly by our client, not by Augmentis. EEO + disclaimer Our client and Augmentis are Equal Opportunity Employers. All qualified applicants will receive consideration without regard to race, color, religion, sex, national origin, age, disability, veteran status, or any other protected characteristic. This job posting does not constitute a contract or guarantee of employment, and role details are subject to change based on our clients' needs. By applying, you acknowledge that your information may be shared with our client for recruitment and hiring.

Job Description Technician A Technician performs the assembly, testing, and verification of advanced fluid‐control components for Aerospace, Nuclear and other applications. This role is ideal for a hands‐on technician who thrives in a precision manufacturing environment and enjoys working with complex electro‐mechanical systems. Key Responsibilities • Perform assembly and performance testing of mechanical and/or electro‐mechanical fluid‐control devices in accordance with engineering procedures, blueprints, and schematics., • Operate, maintain, and help develop high‐pressure test systems, including pneumatic, hydraulic, and calibration‐fluid test stands and pumps., • Conduct electrical testing and verification using a variety of electronic diagnostic tools., • Work within controlled clean‐room environments and conduct particulate analysis with accurate data collection., • Troubleshoot, repair, and validate hardware using systematic diagnostic methods., • Utilize oscilloscopes, and other diagnostic equipment to support testing and analysis., • Maintain a clean, safe, and organized work area., • Lift and move equipment or components up to 50 lbs as needed. Required Skills & Experience • Minimum 5 years of technical or mechanical maintenance experience., • Experience using various hand and measurement tools including but not limited to torque wrenches, height gauges, and calipers., • Ability to read and interpret blueprints, schematics, and technical procedures., • Proven experience assembling and testing electro‐mechanical hardware., • Hands‐on experience with high‐pressure fluid, gas, and cryogenic testing., • Proficiency in electrical testing, including dielectric and insulation‐resistance testing., • Strong computer literacy, including Microsoft Word and Excel., • Experience working in clean‐room environments., • Manufacturing or machining experience is a plus., • Demonstrated ability to troubleshoot and repair hardware using diagnostic tools. Education • Minimum: High School Diploma, • Preferred: Vocational school graduate, Associate Degree or Certificate in Engineering Technology Additional Considerations • Strong team orientation and ability to collaborate across functions., • Capable of working independently with minimal supervision., • Willingness to mentor junior technicians. All candidates must meet the US persons criteria. Please note: The salary range is based on our market pay structure. However, individual salaries are determined by a variety of factors including, but not limited to, business considerations, local market conditions, and internal equity, as well as candidate qualifications, such as skills, education, and experience. Employee Benefits: At Valcor Engineering, we support our employees in all aspects of their life, including their health and financial well-being. Regular employees scheduled to work 30+ hours per week are offered: health, dental, and vision insurance; health savings accounts; a 401(k) savings plan; long term disability coverage; and life and accident insurance. We also have an employee assistance program. Our leave programs include Vacation and PTO time off, paid holidays, as well as other types such as bereavement, and any applicable federal and state sick leave. Employees may participate in the company recognition program to receive monetary or non-monetary recognition awards. We are an equal opportunity employer and do not discriminate on the basis of race, color, religion, sex, national origin, age, disability, genetic information, veteran status, sexual orientation, gender identity, or any other characteristic protected by law. All qualified applicants will be considered for employment without regard to these characteristics. Salary Range:$29.00 To $45.00 Hourly Please note: The salary range is based on our market pay structure. However, individual salaries are determined by a variety of factors including, but not limited to, business considerations, local market conditions, and internal equity, as well as candidate qualifications, such as skills, education, and experience. Company DescriptionValcor Engineering is one of the largest and most recognized suppliers of fluid control products in the aircraft, aerospace and military fields. We specialize in the design and manufacture of Solenoid Valves and control components for liquids and gases in critical application in the aerospace, nuclear, light industrial and scientific industries.Valcor Engineering is one of the largest and most recognized suppliers of fluid control products in the aircraft, aerospace and military fields. We specialize in the design and manufacture of Solenoid Valves and control components for liquids and gases in critical application in the aerospace, nuclear, light industrial and scientific industries.

Job Description Technician A Technician performs the assembly, testing, and verification of advanced fluid‐control components for Aerospace, Nuclear and other applications. This role is ideal for a hands‐on technician who thrives in a precision manufacturing environment and enjoys working with complex electro‐mechanical systems. Key Responsibilities • Perform assembly and performance testing of mechanical and/or electro‐mechanical fluid‐control devices in accordance with engineering procedures, blueprints, and schematics., • Operate, maintain, and help develop high‐pressure test systems, including pneumatic, hydraulic, and calibration‐fluid test stands and pumps., • Conduct electrical testing and verification using a variety of electronic diagnostic tools., • Work within controlled clean‐room environments and conduct particulate analysis with accurate data collection., • Troubleshoot, repair, and validate hardware using systematic diagnostic methods., • Utilize oscilloscopes, and other diagnostic equipment to support testing and analysis., • Maintain a clean, safe, and organized work area., • Lift and move equipment or components up to 50 lbs as needed. Required Skills & Experience • Minimum 5 years of technical or mechanical maintenance experience., • Experience using various hand and measurement tools including but not limited to torque wrenches, height gauges, and calipers., • Ability to read and interpret blueprints, schematics, and technical procedures., • Proven experience assembling and testing electro‐mechanical hardware., • Hands‐on experience with high‐pressure fluid, gas, and cryogenic testing., • Proficiency in electrical testing, including dielectric and insulation‐resistance testing., • Strong computer literacy, including Microsoft Word and Excel., • Experience working in clean‐room environments., • Manufacturing or machining experience is a plus., • Demonstrated ability to troubleshoot and repair hardware using diagnostic tools. Education • Minimum: High School Diploma, • Preferred: Vocational school graduate, Associate Degree or Certificate in Engineering Technology Additional Considerations • Strong team orientation and ability to collaborate across functions., • Capable of working independently with minimal supervision., • Willingness to mentor junior technicians. All candidates must meet the US persons criteria. Please note: The salary range is based on our market pay structure. However, individual salaries are determined by a variety of factors including, but not limited to, business considerations, local market conditions, and internal equity, as well as candidate qualifications, such as skills, education, and experience. Employee Benefits: At Valcor Engineering, we support our employees in all aspects of their life, including their health and financial well-being. Regular employees scheduled to work 30+ hours per week are offered: health, dental, and vision insurance; health savings accounts; a 401(k) savings plan; long term disability coverage; and life and accident insurance. We also have an employee assistance program. Our leave programs include Vacation and PTO time off, paid holidays, as well as other types such as bereavement, and any applicable federal and state sick leave. Employees may participate in the company recognition program to receive monetary or non-monetary recognition awards. We are an equal opportunity employer and do not discriminate on the basis of race, color, religion, sex, national origin, age, disability, genetic information, veteran status, sexual orientation, gender identity, or any other characteristic protected by law. All qualified applicants will be considered for employment without regard to these characteristics. Salary Range:$34.00 To $50.00 Hourly Please note: The salary range is based on our market pay structure. However, individual salaries are determined by a variety of factors including, but not limited to, business considerations, local market conditions, and internal equity, as well as candidate qualifications, such as skills, education, and experience. Employee Benefits: At Valcor Engineering, we support our employees in all aspects of their life, including their health and financial well-being. Regular employees scheduled to work 30+ hours per week are offered: health, dental, and vision insurance; health savings accounts; a 401(k) savings plan; long term disability coverage; and life and accident insurance. We also have an employee assistance program. Our leave programs include Vacation and PTO time off, paid holidays, as well as other types such as bereavement, and any applicable federal and state sick leave. Employees may participate in the company recognition program to receive monetary or non-monetary recognition awards. Company DescriptionValcor Engineering is one of the largest and most recognized suppliers of fluid control products in the aircraft, aerospace and military fields. We specialize in the design and manufacture of Solenoid Valves and control components for liquids and gases in critical application in the aerospace, nuclear, light industrial and scientific industries.Valcor Engineering is one of the largest and most recognized suppliers of fluid control products in the aircraft, aerospace and military fields. We specialize in the design and manufacture of Solenoid Valves and control components for liquids and gases in critical application in the aerospace, nuclear, light industrial and scientific industries.

The Buyer is responsible for the strategic sourcing and procurement of materials, components, and services in support of aerospace and defense manufacturing programs. The Buyer acts as a key liaison between suppliers, engineering, quality, and program management to drive supplier performance, mitiga

Job DescriptionBenefits: • 401(k), • 401(k) matching, • Dental insurance, • Health insurance, • Paid time off Location: North Plainfield, New Jersey Company: Avantier Premium Custom Optics Manufacturer Base Salary: $65,000 $80,000 Job Description: AVANTIER Premium Custom Optics Manufacturer is looking for a dynamic and results-driven Project Manage to join our growing team. We serve high-tech industries such as Aerospace, Biomedical, Life Sciences, and Research, providing precision optical solutions tailored to our clients needs. In this high-impact role, youll be at the forefront of our growth effortsleading strategic outreach, managing targeted campaigns, and qualifying high-value leads. You'll work closely with Sales, Marketing, and Product teams, with strong visibility and opportunity for advancement. What Were Looking For: • A self-motivated sales professional with a proven track record in B2B project management, • Strong relationship-building skills and a strategic mindset, • Experience working with technical or manufacturing industries is a plusJoin us and be part of a team that's advancing innovation through optics. Responsibilities Managing the sales cycle from qualified inbound leads to close, with a focus on generating incremental revenue. Proactively identifying and pursuing new business opportunities, nurturing relationships, and building a strategic sales pipeline for sustained long-term growth. Collaborating with prospects to understand their needs, challenges, and objectives, and delivering customized optical solutions that align with their goals. Consistently meeting or exceeding weekly activity targets, including outreach, follow-ups, and sales engagement metrics. Skills/ Key Qualifications: • 3+ years of successful B2B project management experience, ideally with technical products, • Proven track record in managing warm leads and assist closing long sales cycles, • Skilled in delivering effective presentations and demos, • Comfortable attending industry events (conferences, trade shows) to generate leads, • Excellent communication skills, both written and verbal, • Team-oriented with a positive, proactive attitude, • Background or interest in science/optics is a plus, • Ability to build relationships with C-level decision makers is a strong advantageEducation: Bachelor's degree required, additional certificates are a bonus Why Join Avantier? • Industry training provided, • Work with a dynamic, collaborative team, • High-impact role with growth opportunities

Every day, our team members do amazing things in pursuit of our shared purpose to build trust with our clients, partners, subcontractors, and teammates.No matter your background, education, or career path, if you share our vision to create extraordinary experiences, you belong at HITT.Commercial Con

Job Summary Under general supervision, manage the relationship with existing accounts.Responsible for managing a book of business for existing accounts and generating revenue on assigned accounts.Serve as the primary interface for all products and services and create demand for the organization's pr

Job Title: Project Manager Location: Newark, NJ 6+ Month Contract Pay: 80 - 110/hr, W 2 Summary: Hybrid position with office days on Tuesday and Wednesday in Newark, with occasional field inspections as needed.Subject to change at client’s discretion.Must have: Have reliable transportation and are

UNFI - - Responsibilities: Machine set-up and pre-operational checks for sanitary conditions; Perform quality checks as per SOPs; Observe for product defects and ensure packaging integrity; Oversee line and support staff to satisfy production needs; Inform supervisors of faulty equipment and ensure

Berkeley Heights, NJ (Only Locals OR Can Relocate).We are looking for an experienced.Banking, Payments, and Credit Card domains.The ideal candidate should have started their career as a Java or.NET Developer and transitioned into a Project Management role.The candidate should have hands-on experienc

We are in search of a Manufacturing Engineer. Troubleshoot manufacturing issues, including electrical assembly, wiring, bus bar fabrication, and enclosure modifications. Knowledge of CNC fabrication, punch/laser processes, or enclosure manufacturing.

Job Title: Energy Project Manager.Locations: Newark New Jersey 07102.Hybrid - Remote on Mond/Friday, in-office Tues-Thurs at Newark office + potential on-site inspection once a month.Provide program management oversight over scope, schedule, and budget of energy efficiency projects in compliance wit

Join Our Team as a Project Manager for our Building Sciences projects!.Are you ready to elevate your career with a dynamic and growing firm that values your contributions and offers exciting opportunities for advancement? Hillmann Consulting, LLC, a leading nationwide environmental consulting firm,

We are seeking an experienced Senior Designer, Mobile Design Systems to join our Design System team.This role is crucial for enhancing brand and customer experience across the digital product portfolio.You will collaborate with a geo-distributed mobile native team, collaborating with multi-disciplin

Flow-Turn has been a trusted global manufacturer of powered belt curves and specialty conveyors since 1981.Headquartered in Union, New Jersey, we specialize in designing and producing custom solutions tailored to meet diverse customer requirements.Serving industries such as baggage handling, packagi

Plant Operations Managers act as second in command in the absence of the General Manager.Must have 6-8 years of plant operations experience.Chemical plant experience preferred.Health and Safety is our #1 priority, and we live it 3-6-5!.Environmental experience is a must.Comprehensive health benefits

Construction Manager / Project Manager – Regional Portfolio Coordination.Inside Plant (IP) and Outside Plant (OP) construction teams, engineering groups, planners, and portfolio leadership.The role requires strong experience in.V, 13kV, 26kV, and 69kV systems.The Construction Manager / Project Man

Project Administrator - Data Center Information Technology/Design/Engineer Firm.NJ Data Center growing Information Technology/Design/Engineer Firm is seeking a Project Administrator to join our team.The Project Administrator is responsible for managing the administrative tasks and logistical aspects

We are seeking an experienced Manufacturing Process Engineer with experience in powder-based manufacturing, with a strong chemistry background to lead and optimize manufacturing operations. Analyze and optimize chemical and manufacturing processes to increase throughput, improve efficiency, and redu

Source One is a consulting services company and we're currently looking for the following individual to work as a consultant with our direct client, a regional utility and gas company in Newark, NJ.No Third-Party, No Corp to Corp, No Sponsorship Now or Future.Title: Project Manager - Engineering.Hyb

Pactiv Evergreen - - Responsibilities: Operate bag machines safely and efficiently to produce high quality bags; Check bags for quality defects and complete quality paperwork; Monitor and adjust bag machinery including starting, stopping, jogging, and threading; Change rolls and manage paper alignm

Delivery Operations Manager – JNJ Delivery LLC.We are a high-performing Amazon Delivery Service Partner (DSP) operating in Manhattan, NYC.Our team delivers tens of thousands of packages each week with a commitment to safety, reliability, and exceptional customer experience.The Delivery Operations

Lockheed Martin is a global aerospace, defense, and security company dedicated to advancing scientific discovery and harnessing innovation to make the world a safer place.

Sligan Plastics - - Responsibilities: Operate and maintain CNC grinders, lathes, Bridgeport mills, welders, plasma cutters; Perform tool and die machining using blueprints and precision measuring instruments; Troubleshoot and repair gearboxes, pumps, and production equipment; Refurbish and rebuild

Pratt Industries - - Responsibilities: Safely operate the Rotary Die Cut Machine; Set up bundle breaker, lay boy, shrink tunnel, load former, prefeeder, print, and die cut sections; Inspect annilox rolls and dies/plates before and after run; Train and assist helpers with job duties on the machine a

Under supervision, does bench, general shop and outside machinist work aboard the vessels and terminals of the Staten Island Ferry; performs related work.Examples of typical tasks: sets up and operates machine shop equipment, such as engine lathes, shapers, milling machines, drill presses and grinde

Follow safety rules, manufacturing instructions, work rules and other manufacturing guidelines.

This is a fast-paced position in a sheet metal manufacturing environment. Willingness to adapt and work in a fast-paced manufacturing environment.

ESSENTIAL DUTIES & RESPONSIBILITIES:.Programs and edits CNC turning and or milling machines for production efficiency to manufacture parts compliant to drawing specifications.Ability to read blueprints, drawings, specifications and set up requirements.Selects, aligns and secures holding fixtures, cu

Headquartered in Bensalem, PA and founded in 1999, EDA Contractors holds an extensive portfolio of experience related to the exterior envelope of commercial, institutional, and industrial buildings.EDA achieves excellence by integrating design knowledge, continuous training, and accountability into

US Citizen and Green Card H4-EAD only.This would involve managing stakeholders from various teams, from Network, Firewall, Datacentre, Servers, VM's, Engineering teams, Application teams.SWIFT knowledge would be advantageous.They would need strong project management skills.

Must have experience in a manufacturing QC environment, including electrical and mechanical assembly inspections.

This job description outlines the general nature and level of work performed by employees within this classification.It is not intended to be a comprehensive inventory of all duties, responsibilities, and qualifications required of employees assigned to this job.Assist operations manager with a team

Youll ensure machinery runs efficiently, perform changeovers, and maintain quality and safety standards in a fast-paced manufacturing environment. Occasional exposure to noise, temperature changes, and dust typical of a manufacturing environment. If youre ready to take on a key role in manufacturing

In the role of Project Manager, you will be responsible for managing the construction lifecycle of various projects, ranging in value from $1 million - $30 million.The Project Manager will play a pivotal role in coordinating and collaborating with various stakeholders, including clients, subcontract

This position has the responsibility to comply with safety work rules at all times as well as an obli Machine Operator, 3rd Shift, Operator, Operations, Manufacturing.

Project Manager-It Pmo Change Management.Location: Newark, NJ (Hybrid 3x Onsite) Duration: 6 Months.We're seeking a proactive and detail-oriented junior project manager to support the daily operations of our it program management office (pmo) and change management (cm) functions.This role plays a ke

Follow HACCP principles and Good Manufacturing Practices. Experience in a food or related Manufacturing Production environment preferred. Good Manufacturing Practices (GMPs).

Project Manager will be responsible for managing projects that require new or existing hardware/software deployments.Working closely with IT, this role will coordinate, schedule and follow-up on technology upgrades.In addition, as new technologies are introduced, this Manager will partner with the a

Serves as a manufacturing focal point for intelligent analysis of quality issues, determining true root causes, and implementation of permanent corrective and preventive actions. Hands-on quality and manufacturing experience in an ISO certified environment.

Project Manager/Quality Control Engineer.NJ-27 Suite 202 - Edison, NJ 08817 US (Primary).ATANE is seeking an experienced Project Manager/Quality Control Engineer for our Bridge Inspection Group based out of the Edison, NJ office.The successful candidate for this position will be primarily responsibl

Provide expert technical support to customers, solve complex challenges, and drive product development.Collaborate with internal teams and suppliers, conduct trials, troubleshoot systems, and ensure products meet customer requirements.Manage product development projects for existing and new customer

Insight Global is seeking a Senior Project Manager to support program execution by managing project deliverables, timelines, and stakeholder communications.It involves strategic planning, cross-functional collaboration, and continuous improvement efforts across multiple business areas.Develop and ma