Air quality jobs in Trenton, New JerseyCreate job alerts

Job ID: 717231BR Date posted: Feb. 17, 2026 Description:What We're Doing Here at Lockheed Martin Rotary and Mission Systems we take on the most demanding challenges in the world. We seek out innovative ideas and creative solutions to seemingly impossible problems facing our customers in the Sensors, Effectors & Mission Systems (SEMS) organization. We collaborate with the best Radar engineers in the business across the Moorestown, NJ and Syracuse, NY sites to invent solutions where they don't exist yet. If you're looking for the challenge of a lifetime on a team of the brightest minds in the world, then Rotary Mission Systems and the Sensor Architectures team is the place for you. If you're looking for life-long learning and a career where the hard work is the fun part, then you're in the right place. Lockheed Martin. Your Mission is Ours. The Work Our Radar Systems Engineering team is seeking a candidate to support architecture, design, Concept of Operations, requirements development, analysis, and implementation of high performance Active Electronically Scanned Array (AESA) radar systems. In your role as a Sensor Systems Architect, you will: • Perform concept of operations design, radar behavior definition, and associated requirements development to drive radar capability implementation across radar subsystems., • Successfully collaborate with subsystem teams to define clear, executable, and testable approaches for meeting mission success criteria, • Conduct trade studies and analyze the radar system level performance impacts to support and evaluate design decisions, • Develop and present detailed design documentation, • Represent the organization on contracts and interface with internal and external customers, program and senior leadership, and multi-disciplinary teams on significant technical matters., • Apply strong analytical and communication skills in a dynamic, multi-disciplinary environment Note: • This position requires a government security clearance; you must be a US Citizen for consideration. Who We Are Our team of Radar Systems Engineers and Sensor Architects come from diverse backgrounds and experience levels, all working together to deliver quality designs and cutting-edge capabilities to our customers. We support a broad array of Radar products and customers including the Missile Defense Agency, US Navy, Air Force, US Army, Space Force, and foreign partners including Japan, Canada, Spain, Norway, Australia, UK and more. Radar at Lockheed Martin Who You Are If you enjoy a technical challenge that will get you thinking outside the box. If you seek a collaborative environment working with motivated engineers with a diverse range of experiences and backgrounds. If you're a lifelong learner with a passion for driving technology forward. If you're an expert in your field looking to apply your skill to advancing sensor architectures to stay ahead of ever-evolving customer needs across a broad array of environments and threat spaces, then this is the place for you. Why Join Lockheed Martin: At Lockheed Martin we value your unique skills and expertise, and we aim to give back continuously by offering a wide variety of benefits and amenities to help our employees live flexible, healthy, and fulfilling lives at and outside of work. Some of our favorite perks include: • The promotion of Work Life Balance with every Friday off (Flex 4/10 Schedule) or every other Friday off (Flex 9/80) or a 5/8 schedule., • A competitive 401k match and bonus. Explore some of the cutting‑edge technologies we support: #REAS Basic Qualifications: • Functional knowledge of radar systems and subsystems, • Demonstrated experience in one or more of the following areas: system analysis, architecture, requirements development, trade studies, modeling and simulation, or integration and test., • High proficiency in C++ or Matlab or Python, • Advanced degree in Electrical Engineering, Computer Science/Engineering, Physics or equivalent, • Radar systems development experience including signal processing, antenna patterns, detection/tracking/discrimination algorithms, software, data analysis, and modeling & simulation, • Experience leading technical teams and collaboration across multi-disciplinary teams, • Demonstrated analytical, applied mathematics and problem-solving skills With our employees as our priority, we provide diverse career opportunities designed to propel, develop, and boost agility. Our flexible schedules, competitive pay, and comprehensive benefits enable our employees to live a healthy, fulfilling life at and outside of work. We place an emphasis on empowering our employees by fostering an inclusive environment built upon integrity and corporate responsibility. If this sounds like a culture you connect with, you're invited to apply for this role. Or, if you are unsure whether your experience aligns with the requirements of this position, we encourage you to search on Lockheed Martin Jobs, and apply for roles that align with your qualifications. Experience Level: Experienced Professional Business Unit: RMS Relocation Available: Possible Career Area: Systems Engineering: System Architecture Type: Full-Time Shift: First

Job ID: 718202BR Date posted: Feb. 16, 2026 Description:What We're Doing Here at Lockheed Martin Rotary and Mission Systems (RMS) we take on the biggest and baddest challenges in the world. We seek out innovative ideas and creative solutions to seemingly impossible problems facing our customers in the Integrated Warfare Systems & Sensors (IWSS) organization. We collaborate with the best Radar engineers in the business across the Moorestown, NJ and Syracuse, NY sites to invent solutions where they don't exist yet. We keep pushing the boundaries of Electronic Protection solutions to stay ahead of the adversary in the ever-evolving game of cat-and-mouse that is Electronic Warfare. If you're looking for the challenge of a lifetime on a team of the brightest minds in the world, then Rotary Mission Systems and the Electronic Protection team is the place for you. If you're looking for life-long learning and a career where the hard work is the fun part, then you're in the right place. Lockheed Martin. Your Mission is Ours. The Work In your role as a Senior Systems Engineer - Radar Electronic Protection, you will: • Develop models and/or detailed simulations to support system design evaluation., • Conduct data analysis to assess system performance., • Write verification plans and test procedures showing traceability to system and software specifications., • Support integration and test, evaluate test results, investigate discrepancies, provide technical assessment of anomalies, and drive issues to resolution., • Conduct system verification and support certification activities., • Participate in landmark reviews of Radar System products with internal and external customers, program and senior leadership, and multi-disciplinary engineering teams., • Mentor junior engineers and share knowledge of Electronic Protection concepts. Who We Are Our Electronic Protection team of systems engineers and sensor architects all working together to deliver quality designs and cutting-edge capabilities to our customers. We support a broad array of Radar products and customers including the Missile Defense Agency, US Navy, Air Force, US Army, Space Force, and foreign partners including Japan, Canada, Spain, Norway, Australia, UK and more. Radar at Lockheed Martin Radar at Lockheed Martin Who you are If you enjoy a technical challenge that will get you thinking outside the box. If you seek a collaborative environment working with other motivated engineers. If you like getting your hands dirty in architecting new designs, digging into the nuances of algorithm performance, developing novel models, supporting live testing of tactical systems, or anything in between. If you're ready to take on the complexities of an ever-evolving adversary driving new Electronic Protection designs, then this is the place for you. Why Join Us At Lockheed Martin we value your unique skills and expertise, and we aim to give back continuously by offering a wide variety of benefits and amenities to help our employees live flexible, healthy, and fulfilling lives at and outside of work. Some of our favorite perks include: Learn more about Lockheed Martin's comprehensive benefits package here! Learn more about Lockheed Martin's comprehensive benefits package here! Explore some of the cutting‑edge technologies we support: #REAS Basic Qualifications: • Bachelor's degree or higher in Electrical Engineering, Computer Science/Engineering, Physics or equivalent combined with 5 years of related experience., • Functional knowledge of Radar Systems., • Demonstrated experience in one or more of the following areas: system analysis, architecture, requirements development, trade studies, modeling and simulation, or integration and test., • High proficiency in C++ or Matlab or Python., • Advanced degree in Electrical Engineering, Computer Science/Engineering, Physics or equivalent., • Radar and Electronic Warfare (i.e. Electronic Protection, Electronic Attack) systems development experience including software, data analysis, and modeling and simulation, and Integration and Test phases, • Demonstrated analytical, applied mathematics and problem-solving skills., • Experience with automated Continuous Integration/Continuous Delivery methodologies and frameworks., • Experience developing solutions to operate in congested RF environments, including (EMI) Electromagnetic interference. Lockheed Martin is an equal opportunity employer. Qualified candidates will be considered without regard to legally protected characteristics. The application window will close in 90 days; applicants are encouraged to apply within 5 - 30 days of the requisition posting date in order to receive optimal consideration. At Lockheed Martin, we use our passion for purposeful innovation to help keep people safe and solve the world's most complex challenges. Our people are some of the greatest minds in the industry and truly make Lockheed Martin a great place to work. With our employees as our priority, we provide diverse career opportunities designed to propel, develop, and boost agility. Our flexible schedules, competitive pay, and comprehensive benefits enable our employees to live a healthy, fulfilling life at and outside of work. We place an emphasis on empowering our employees by fostering an inclusive environment built upon integrity and corporate responsibility. If this sounds like a culture you connect with, you're invited to apply for this role. Or, if you are unsure whether your experience aligns with the requirements of this position, we encourage you to search on Lockheed Martin Jobs, and apply for roles that align with your qualifications. Experience Level: Experienced Professional Business Unit: RMS Relocation Available: No Career Area: Systems Engineering: Assembly/Integration and Test Type: Full-Time Shift: First

Job DescriptionAre you a skilled HVAC technician who loves solving problems and helping customers upgrade their comfort? McHales, a trusted name in Levittown, PA for over 70 years, is looking for service professionals who not only fix HVAC systems but also enjoy offering solutions that improve home comfort and efficiency. If you have strong technical expertise and a passion for sales, this is your opportunity to join a company with a long-standing reputation for quality and customer satisfaction.Responsibilities: • Expertly troubleshoot and repair a wide range of residential HVAC systems and equipment., • Diagnose and resolve electrical and mechanical issues with precision and confidence., • Educate customers on system performance and proactively recommend upgrades that improve comfort, efficiency, and indoor air quality., • Promote and sell value-added services such as indoor air quality products, duct cleaning, Aeroseal, maintenance plans, and system replacements., • Deliver a five-star customer experience on every call—build trust, exceed expectations, and turn satisfied homeowners into lifelong customers., • Collaborate with teammates and contribute to a positive, performance-driven culture., • Stay sharp by embracing ongoing training, new technologies, and growth opportunities.Qualifications:, • Minimum of five (5) years of hands-on experience as a residential HVAC Service Technician., • EPA Universal Certification required., • Valid driver’s license and clean driving record., • Must pass a pre-employment background check., • Sales experience within residential HVAC or home services strongly preferred., • Familiarity with ServiceTitan or similar service management software is a plus., • Strong communication and interpersonal skills, able to educate, influence, and close with professionalism., • Driven, dependable, and committed to delivering excellence in every customer interaction., • Our top performers are the highest-paid technicians in the Levittown market., • Spiff and commission potential on top of hourly pay!, • PTO - paid time off and Holidays!, • Fully stocked take-home Company vehicle, • Medical Insurance - For your insurance premiums for health, dental, vision, life insurance, short-term and long-term disability, • New technology, including iPad, access to integrated software., • Gas card, • 401k retirement plan, • A great team with cool events like happy hour, outings, etc!, • Trainings to help you excel in your career! BuxaFmhbQM

Job Description PDM Group has a proud company history that dates back to 1935. One of our Founding Companies, Hearnen Air Conditioning was one of the first factory distributorships set up by Willes Carrier. We are a leading Industrial and Commercial Air Conditioning Heating and Ventilating Service provider. Our business was founded on responding quickly to our customer's needs, delivering good quality service and producing a positive result for our customers. We have an office with a fully staffed Service Department in Cranbury, NJ which provides HVAC Service and Maintenance to the Tri-State Area and beyond including Maryland which covers Metro Washington, DC and Northern Virginia. PDM Group has made its name providing the highest quality Engineering, Design Installation and Service. Our Engineering and Installation Department specializes in Design Build Applications from the simplest to the most complex including air conditioning, heating, piping and process systems guaranteed to meet your specifications. PDM Group sells, installs and services all major brands of HVAC Equipment including Process and Comfort Chillers. We specialize in control systems including Building Automation, Process Chillers, and Cooling Towers for the Plastics Industry and specialty equipment such as Desiccant Dehumidifiers for the Food, Pharmaceutical and Process Industries, Humidification Systems and Data Center Cooling Equipment. We set high standards for all our employees and sub-contractors. Their attitudes and skills are expected to reflect our company's commitment to exceed your expectations in everything we do. Now is the time to join G.E. Mechanical / PDM Group! POSITION OVERVIEW: G.E. Mechanical / PDM Group provides service 24/7, 365 days a year, including Holidays. After hours Emergency Service is addressed through our phone system which will put any customer in need of service directly in touch with an on-call Technician. PDM Group is reliable, and our work is trusted as we provide worry-free services our customers can always count on. The HVAC/R Service Technician's responsibility is to provide high-quality heating, ventilation, air-conditioning, and refrigeration services to commercial customers using expertise in HVAC systems and troubleshooting. Commercial HVAC/R Service Technician Responsibilities Installation, troubleshooting, repair and maintenance services for commercial refrigeration and HVAC systems Commercial/industrial customers include restaurant equipment, convenience stores, cold storage facilities, distribution companies, and super market refrigeration Troubleshoot and repair commercial HVAC systems to including split systems, chillers, packaged units, oil- and gas-fired boilers and control systems Food service preparation equipment Ability to work with tablet-based service ticket software system for all HVAC/R work performed Perform HVAC/R preventative maintenance service for contract customers Ability to work overtime as needed and be part of a scheduled HVAC/R on-call rotation Minimum Qualifications Education/Experience High School diploma or GED 3+ years of HVAC/R Service Preferred Qualifications 3+ years of commercial refrigeration experience Commercial and residential air conditioning and gas/oil heat service experience Commercial and/or residential HVAC replacement experience Food service equipment experience Understanding of control systems and wiring EPA certification Professional, ethical, and a team player willing to grow with the company EARN UP TO $46.23 PER HOUR + PLUS ABILITY TO EARN HIGHER + UNION BENEFITS PACKAGE * REWARDING YOUR PERFORMANCE * Competitive salary, commensurate with experience Company paid vacation and holidays Company health care, vision, & dental benefits 401k plan with Company match Company paid life insurance Education and training provided with monetary incentives available for education courses completed Eligible for performance and company-based bonuses PDM Group is an Equal Opportunity Employer with a strong commitment to the achievement of excellence and diversity among its workforce. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, protected veteran status, or any other characteristic protected by law.

As an Airside Experience Specialist, you are the face of our private aviation terminal, delivering a seamless, personalized, and welcoming experience for every guest, crew member, and aircraft in our care. In this dynamic role, you'll combine exceptional hospitality with hands-on operational support to ensure our guests feel cared for, from wheels down to wheels up. You’ll operate ground service equipment and perform aircraft ground services while engaging guests with professionalism and a service-first mindset. This role requires schedule flexibility, including nights, weekends and holidays, and the ability to thrive in outdoor environments around active aircraft and in varying weather conditions. If you enjoy creating memorable guest experiences in a fast-paced, luxury-driven environment – and you're excited by the energy of the runway – this is the role for you. (Other duties may be assigned) • Work as part of a team to conduct airside operations safely and efficiently in accordance with established policies and standard operating procedures (SOPs) ensuring efficient and accurate communication through various methods to accomplish operational tasks., • Collaborate, cooperate, and work closely with all team members, guests, clients, vendors, and aircraft crewmembers to ensure service needs are met. Services include, but are not limited to, fueling, de-icing, lavatory, ground power and potable water services, parking, marshalling, wing walking, delivering catering and towing., • Proactively prepare for arriving/departing aircraft, identify and perform open job tasks, and immediately speak up and/or point out observed safety concerns to all stakeholders., • Operate and drive ground service equipment such as fuel trucks, de-icing trucks, ground power units, tugs, stair trucks, etc., • Load and unload luggage and other cargo into/out of aircraft and from/into the PAT, guest vehicle, or other mode of transportation., • Provide professional and friendly guest service while exhibiting a positive and helpful attitude to everyone at all times ensuring guests always receive an exceptional experience., • Offer safe, convenient, and courteous transportation when driving shuttle vehicle to transport guests, luggage and cargo., • Maintain safe, clean, and secure ramps and operations., • Fuel handling, including fuel quality control, fuel receipt, inventory and maintaining accurate related documentation., • Understand, comply with, and enforce all operational, safety, and guest service requirements for all aspects of the job., • Stop work when an unsafe condition or act is likely to cause harm to people, the environment, Company or guest assets, or the Company’s reputation if the work continues. Report concerns to the appropriate manager and cooperate in addressing the unsafe act or condition., • Follow emergency response procedures during critical events., • Understand, comply with, and enforce all security (physical, cyber and data) protocols as dictated by both Signature Aviation and the airport., • Create accurate records pertaining to time worked and activities and services performed. Minimum Education and/or Experience: • High School Diploma or General Education Degree (GED)., • Minimum of 18 years of age., • Ability to pass company background checks (criminal and motor vehicle), drug tests, meet airport background check requirements to receive and maintain an airport security badge, and be insurable by the Company's applicable insurance policies., • Must be legally authorized to work in the jurisdiction of employment., • Excellent vision and coordination to move and/or direct aircraft and visually inspect aircraft fuel. Ability to pass a color vision test for purposes of inspecting aviation fuel., • Must possess a valid state driver’s license. In some locations a commercial driver’s license (CDL) is required as dictated by local regulations and business needs., • Must be able to exercise good judgment and follow directions/directives from supervisor/management., • Preferred: Three (3) to six (6) months experience and/or training in aviation, customer service or other related field; or equivalent combination of education and experience and/or training. Additional knowledge and essential skills: • Hospitality Skills: Excellent guest service skills with an energetic, outgoing, and guest-obsessed personality. Must be able to anticipate guest needs and prioritize guest requests and job responsibilities by exhibiting a keen ability to multi-task in a fast-paced environment. Must be able to maintain professionalism and confidentiality., • Language Skills: Ability to read and comprehend documents such as safety rules, operating instructions, and procedure manuals, and for safety-sensitive tasks, in English. Clearly communicate in English with others in person, via telephone, radio communicators, and in writing., • Math Skills: Ability to perform simple arithmetic (e.g., addition, subtraction, multiplication, division, percentages, fractions, angles, degrees, time)., • Physical Ability: Must be able to physically enter/exit and operate motor vehicles and ground support equipment such as fuel trucks, vans, tugs, and cars. Must be able to perform various functions safely and efficiently (e.g., fueling, de-icing) from elevated heights., • Critical Thinking / Reasoning Ability: Ability to carry out multi-step instructions. Ability to deal with standardized situations with only occasional or no variables., • Interpersonal Skills: Ability to get along and work well with others. Excellent interpersonal skills for effective collaboration with team members and service to guests., • Multitasking: Ability to handle multiple tasks simultaneously while maintaining attention to detail., • Computer Skills: Ability to use a computer and email, learn necessary company software, and pass computer-based training modules. From your health to your financial wellness, there are several benefits for you and your family when joining Signature Aviation. Our Benefits: • Medical/prescription drug, dental, and vision Insurance, • Health Savings Account, • Flexible Spending Accounts, • Life Insurance, • Disability Insurance, • 401(k), • Critical Illness, Hospital Indemnity and Accident Insurance, • Identity Theft and Legal Services, • Paid time off, • Paid Maternity Leave, • Tuition reimbursement, • Training and Development

Job DescriptionBenefits: • Employee discounts, • Health insurance We are looking for a General Maintenance Technician to assist in maintaining and repairing the appearance, waiting rooms, automotive bays, and machinery in our locations. Responsibilities As a General Maintenance Technician, you will be responsible for working the maintenance and logistics team to aid in: Conduct routine inspections of the locations to identify maintenance needs. Perform general maintenance tasks such as repairing and replacing doors, windows, and locks, fixing plumbing leaks, painting, and replacing light bulbs. Perform preventive maintenance on equipment and machinery to ensure their optimal functionality. Conduct regular inspections of electrical systems, identify potential issues, and repair or replace faulty components. Maintain and repair heating, ventilation, and air conditioning (HVAC) systems to ensure a comfortable working environment. Perform carpentry work such as building shelves, repairing furniture, and installing fixtures. Handle painting and plastering tasks to maintain a clean and aesthetically pleasing appearance. Maintain and repair landscaping. Respond promptly to maintenance requests from employees, identifying and resolving issues in a timely manner. Keep accurate records of maintenance activities, including tasks performed, materials used, and costs incurred. Collaborate with other maintenance workers or contractors as necessary to complete complex tasks or projects. Ensure compliance with safety regulations and maintain a safe working environment for all employees and visitors. General Maintenance Worker Required Skills 1. Must have a drivers license and own transportation, 2. Proven experience as a General Maintenance Worker or similar role., 3. Solid knowledge of general maintenance techniques and equipment., 4. Proficiency in using hand and power tools., 5. Basic knowledge of electrical, plumbing, and HVAC systems., 6. Strong problem-solving skills and ability to prioritize tasks effectively., 7. Excellent attention to detail and ability to follow instructions accurately., 8. Ability to work independently or as part of a team., 9. Good physical stamina and strength to handle manual tasks., 10. Effective communication and interpersonal skills., 11. Flexibility to work on weekends or outside regular working hours for emergencies or special projects. Qualifications • High school diploma or equivalent., • Valid driver's license, clean driving record and transportation required., • Certification in a relevant trade or maintenance field (e.g., electrical, plumbing, HVAC) is desirable but not mandatory., • Prior experience in a similar maintenance role is preferred.

FIELD SALES AND MARKETING REPRESENTATIVE – Techtronic Industries, NA (TTI) About Us: TTI (Techtronic Industries) is a fast-paced, high energy, organization that rewards out-of-the-box thinking to foster innovation allowing us to be the best in our industry. We provide a multi-faceted training program and hands-on field experience that will stimulate, challenge, and reward you. TTI is a world-class leader in design, manufacturing and marketing of power tools and accessories, outdoor product equipment, and floor care products. Our consumers range from professional and industrial users in the home improvement, repair, and construction industries to homeowners & DIY enthusiasts. Our unrelenting strategic focus on powerful brands, innovative products, operational excellence, and exceptional people drives our culture. This focus and drive provides TTI with a powerful platform for sustainable leadership and strong growth. Our brands and products are recognized worldwide for their deep heritage, superior quality, outstanding performance, and compelling innovation. Our products include professional power tools and accessories, outdoor power equipment, and floor care. Our brands include Milwaukee®, AEG®, Ryobi®, Hart ®, Oreck®, Hoover®, Dirt Devil® and Vax®. In this position, you will drive sales of our premier product lines within one of our largest retail partners. This position will allow you to enhance your selling, account management, and communication skills while launching your career in a fast-paced and extremely rewarding company. Duties and Responsibilities: • Exceed sales targets by delivering best-in-class Business to Consumer sales and customer service within The Home Depot, engaging directly with customers to understand their needs and recommend tailored TTI product solutions, all while demonstrating deep product knowledge and enthusiasm, • Plan and execute promotional events, product demos, and store walks to drive consumer engagement and increase product sell-through, • Support and implement strategic corporate brand marketing initiatives and promotional activities to increase brand awareness and drive sell-through, • Ensure brand presence and sales-readiness through strategic merchandising, optimal product placement, and completion of store objectives and resets—leveraging data analytics through Microsoft Power BI to drive decisions and maximize impact, • Develop a strong understanding of the retail marketplace, including customer profiles, product applications, competitive landscape, and channel dynamics, • Participate in TTI’s world class training program to be equipped with the knowledge to work independently within your assigned market, • Build and manage relationships with The Home Depot team members to enhance in-store execution and cultivate long-term business partnerships, • Effectively manage inventory levels through down-stocking, maintaining product accessibility, and ensure prompt reporting of all tasks and responsibilities, • Participate in merchandising resets to support TTI’s relentless innovation, ensuring the timely placement of cutting-edge products and solutions that drive growth, competitive advantage, and meet evolving market needs, all while adhering to TTI’s safety protocols Note: Employee's duties and responsibilities are not limited by the above. Other duties may be assigned as deemed necessary by the employee's supervisor. In addition to the basic requirements of the position, all employees are expected to meet the company's goals of continual improvement in the areas of knowledge, skills, processes, and quality. Job / Employment Requirements: • Must be at least 21 years of age or older, • Eligible to work in the United States without sponsorship or restrictions, • Ability to pass drug screening and Motor Vehicle Report screening, • Must have a valid United States driver’s license for at least one continuous full year in one state, • Must have a personal vehicle / reliable form of transportation, • Possess and maintain valid personal vehicle insurance listing you as the primary driver, • Position requires travel to/ from assigned store location(s) as well as occasional travel for meetings, projects, events, etc. Air travel will be required, • Employees will also be required to transport a small amount of company property (company devices, demo tools, tool kit, safety supplies), • Capable of reaching and/or lifting overhead in addition to ascending/descending ladders to move product, • Capable of lifting and transporting heavy tools (up to 50 lbs.) and requesting assistance as needed, • Capable of using hands to maneuver small objects, assemble tools and build displays, • Ability to work nights and weekends – weekends will be required at different points throughout the year, • Ability to work in a retail environment full time and stand for the duration of the shift, with the exception of meal and rest breaks, • Applicant should be self-motivated and a team player with strong organizational, planning and time management skills, • The applicant must be MS Office proficient, • Multilingual abilities preferred in specific markets depending on business needs, • Formal higher education preferred but not required – Equivalent experience will be considered, • Relocation may be required for future promotional opportunities Compensation and Benefits: • Salary Non-Exempt Position (Overtime Eligible), • The pay range for this position is $24.04 and $25.96/hour equating to a Target Annual Salary of $50,000 - $54,000, • Sales Contests and Incentives to Earn Additional Income (In Correlation with Business Needs / Focuses), • Vehicle Allowance of $400/month equating to a target of $4800/year (pre-taxed) dispersed evenly across the 52 weeks in a year, • Company iPhone and iPad, • Medical, Vision, and Dental Benefits Available, • Insurance Coverages Available such as Short-Term Disability, Long Term Disability, Basic Life Insurance, Basic AD&D, and more, • 401K (Company Matches 50% up to 8% of Employee’s Salary), • Eligible for up to 10 Paid Holidays (Based on hire date), • Accrue up to 104 hours of PTO – 1st Year – Based on hire date, • Relocation assistance if moving for the position based on needs of the business, • Employee Referral Bonus Program and other incentive initiatives Locations available Nationwide. To learn more about TTI, visit our website at .

Job Description We are seeking a skilled and experienced Service HVAC Technician to join our team. As an Service HVAC Technician, you will be responsible for installing, maintaining, and repairing heating, ventilation, and air conditioning systems. This is a full-time position. Duties: • Install, maintain, and repair HVAC systems, • Perform regular maintenance tasks, • Diagnose and troubleshoot issues with HVAC systems to identify the root cause of problems, • Conduct tests to ensure proper functioning of HVAC systems after repairs or installations Skills: • Proficient in brazing and plumbing techniques related to HVAC systems, • Experience as a Service Technician or intern service technician is preferred, • Excellent mechanical knowledge and troubleshooting skills, • Strong attention to detail and problem-solving abilities, • Ability to work independently as well as part of a team, • Strong communication skills Requirements Knowledge of HVAC systems, including the ability to read blueprints and technical diagrams Current driver’s license and ability to drive a company vehicle Must have drill set and necessary handtools. Company can provide tools upon negotiation If you are a skilled HVAC Technician looking for a challenging role with opportunities for growth, we encourage you to apply. Join our team and contribute to providing quality heating, ventilation, and air conditioning services to our clients. Job Type: Full-time Salary: Starting at $18.00 per hour Work Location: Various Sites

Summary You will serve as a PIPEFITTER LEADER (EXPERT) in the DEPARTMENT OF THE NAVY to include work sites of Portsmouth Naval Shipyard, Puget Sound Naval Shipyard, Norfolk Naval Shipyard, and Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility. This position is located in the Pipe Shop (Shop 56). Applicants will only be considered for positions within their own UIC. For example: If you are within UIC 4523A, you will only be considered for positions within 4523A. Duties Help \n • You will serve as an Expert Pipefitter leading a group to ensure work assignments are completed.\n, • You will install, modify, fabricate, and repair new and existing shipboard system piping and equipment including low and high pressure air, water, and steam systems.\n, • You will mentor, train and instruct Pipe Shop employees in a wide range of pipefitting duties.\n, • You will inspect completed and in progress work for quality of workmanship and adherence to requirements, specifications, standards, plans, and schedules.\n, • You will perform maintenance, repairs, troubleshooting, installation, modification and testing in the shop and onboard ships.\n, • You will perform research to continually improve trade processes and keep shop personnel apprised of new technologies, procedures, best practices, and tooling improvements.\n\n Requirements Help Conditions of employment \n • Must be a US Citizen.\n, • Must be determined suitable for federal employment.\n, • Must participate in the direct deposit pay program.\n, • New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit e-verify.gov\n, • Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.\n, • Males born after 12-31-59 must be registered for Selective Service.\n, • This is a bargaining unit position.\n, • You may be required to successfully complete a pre-appointment physical examination.\n, • You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.\n, • You will be required to wear personal protective equipment such as helmets, gloves, coveralls, glasses, goggles, respirators and safety shoes continuously for the duration of the work shift.\n, • Work is performed in areas where potentially harmful physical and chemical agents are present (e.g. fumes, dust, heat, ionizing and non-ionizing radiation and chemicals). You will be required to participate in medical surveillance programs.\n, • This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time.\n, • This position requires the ability to lift and carry items weighing 50 pounds.\n, • This position requires the ability to climb vertical ladders when working aboard ships and submarines, and occasional work from ladders, platforms and staging areas.\n, • This position may require work in confined spaces.\n, • This position requires rotating shift work.\n, • This position may be subject to work an uncommon tour, including nights, weekends, and holidays to meet mission requirements. Overtime or night differential pay and/or unusual duty hours may be required.\n, • This may be a Drug Testing position. If so, successful completion of a pre-employment drug test (including marijuana) is required.\n, • A tentative offer of employment will be rescinded if you fail to report to the drug test appointment or fail the test. You may be subject to random drug testing.\n, • This position may require exposure to high noise levels.\n\n Qualifications Although a specific length of time and experience is not required for most trade and labor occupations, you must show through experience and training that you possess the quality level of knowledge and skill necessary to perform the duties of the position at the level for which you are applying. Qualification requirements emphasis is on quality of experience, not necessarily the length of time. Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the job elements and screen out listed below. This job has a screen-out element which will be used to determine minimum eligibility for this job. Applicants who do not receive a minimum of two points on the screen-out element(s) will be found ineligible. The Screen-out Element for this position is: ABILITY TO LEAD OR SUPERVISE. Applicants must meet the requirements of the Office of Personnel Management (OPM) Job Qualification Handbook for Trades and Labor Occupations. Additional qualification information can be found at: Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment. Education This job does not have an education qualification requirement. Additional information Salary is based on geographical location and is subject to change with the annual local wage surveys in accordance with the provisions of 5 CFR Part 532 for all employees whose official duty station is located within the geographic boundary of the wage area definition. For more information please visit: SALARY: Puget Sound Naval Shipyard: WA: CA: Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility: Portsmouth Naval Shipyard: ME: CA: Norfolk Naval Shipyard: VA: PA: This position is covered by the Department of Defense Priority Placement Program. Additional vacancies may be filled by this announcement. A tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointments. Temporary promotions may be extended up to 5 years at the discretion of management and in accordance with applicable regulations. Temporary actions taken under this announcement may be made permanent without further competition. Temporary actions taken under this announcement may be terminated at any time before the established not-to-exceed date. Certain incentives (such as Recruitment, Relocation or Student Loan Repayment) may be authorized to eligible selectees. Applicants rated ineligible on this vacancy announcement need to reapply and update their application package to be considered on future vacancies filled through this announcement. A relocation incentive may be authorized. A relocation incentive is generally a single payment intended to offset some of the relocation costs experienced by the selectee. Applicants selected and hired through this vacancy announcement need to reapply to be considered on future vacancies filled through this announcement. Referral lists will be issued on an as-needed basis as vacancies occur. All eligibility and qualifications must be met by the referral cut-off date. Federal annuitant information: The selection of an annuitant is subject to the Department of Defense and Department of the Navy policy on the employment of annuitants. Policy information may be found at: PPP applicants will be placed at the FPL, if determined Well Qualified (WQ). To receive priority consideration, the FPL must be the same grade level or equivalent of the retained grade or the grade held immediately prior to separation. Expand Hide additional information Candidates should be committed to improving the efficiency of the Federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution. Benefits Help A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits. Review our benefits Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.

Be visionary Teledyne Technologies Incorporated provides enabling technologies for industrial growth markets that require advanced technology and high reliability. These markets include aerospace and defense, factory automation, air and water quality environmental monitoring, electronics design and development, oceanographic research, deepwater oil and gas exploration and production, medical imaging and pharmaceutical research. We are looking for individuals who thrive on making an impact and want the excitement of being on a team that wins. Job Description Reporting to the Production Manager, this position will assemble, solder, and perform basic tests for subassemblies, optical assemblies, CCD based detectors, and other scientific instruments in a clean room environment within our ISO-9000 production facility. RESPONSIBILITIES INCLUDE: \n • Assemble intricate mechanical assemblies and subassemblies with precision tools and fixtures.\n, • Crimp, stake, screw, bolt, rivet, weld, solder, or performs similar operations to join or secure parts in place, using hand tools, power tools, machines, and equipment.\n, • Connects component lead wires to printed circuit or routes and connects wires between individual component leads and other components, connectors, terminals, and contact points, using crimping, welding, wire bonding or related bonding procedures and equipment.\n, • Adjusts or trims materials from components to achieve specified electrical or dimensional characteristics.\n, • Performs on-line go-no-go testing and inspection, using magnifying devices, measuring instruments, and electronic test equipment, to ensure parts and assemblies meet production specifications and standards.\n, • Measures parts to verify dimensional specifications using precision measuring devices.\n, • May set up and operate machinery to modify parts.\n, • Input data into, and extract data from, various production and company databases and ERP systems.\n, • Read work orders, drawings, and procedures regarding duties to be performed.\n, • Participate in cross-training activities.\n, • Identify problems with documentation and initiate corrections and improvements for new and existing products and methods.\n, • Assist in transferring new product assemblies, instruments from product development into production.\n\n EDUCATION/ EXPERIENCE NEEDS: \n • High School education or equivalent.\n, • 3-5 years of experience in electro/mechanical assembly and test environment.\n, • Prior microscopic/ precision assembly experience.\n, • IPC-610 or J-STD-001 certification preferred\n, • Ability to work in a team environment\n, • Proficient computer skills\n, • Good interpersonal skills\n, • Experience with ERP Systems\n, • Experience with ISO-9001\n\n Teledyne and all of our employees are committed to conducting business with the highest ethical standards. We require all employees to comply with all applicable laws, regulations, rules and regulatory orders. Our reputation for honesty, integrity and high ethics is as important to us as our reputation for making innovative sensing solutions. Teledyne is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age, or any other characteristic or non-merit based factor made unlawful by federal, state, or local laws.

Be visionary Teledyne Technologies Incorporated provides enabling technologies for industrial growth markets that require advanced technology and high reliability. These markets include aerospace and defense, factory automation, air and water quality environmental monitoring, electronics design and development, oceanographic research, deepwater oil and gas exploration and production, medical imaging and pharmaceutical research. We are looking for individuals who thrive on making an impact and want the excitement of being on a team that wins. Job Description Reporting to the Production Manager, this position will assemble, solder, and perform basic tests for subassemblies, optical assemblies, CCD based detectors, and other scientific instruments in a clean room environment within our ISO-9000 production facility. RESPONSIBILITIES INCLUDE: \n • Assemble intricate mechanical assemblies and subassemblies with precision tools and fixtures.\n, • Crimp, stake, screw, bolt, rivet, weld, solder, or performs similar operations to join or secure parts in place, using hand tools, power tools, machines, and equipment.\n, • Connects component lead wires to printed circuit or routes and connects wires between individual component leads and other components, connectors, terminals, and contact points, using crimping, welding, wire bonding or related bonding procedures and equipment.\n, • Adjusts or trims materials from components to achieve specified electrical or dimensional characteristics.\n, • Performs on-line go-no-go testing and inspection, using magnifying devices, measuring instruments, and electronic test equipment, to ensure parts and assemblies meet production specifications and standards.\n, • Measures parts to verify dimensional specifications using precision measuring devices.\n, • May set up and operate machinery to modify parts.\n, • Input data into, and extract data from, various production and company databases and ERP systems.\n, • Read work orders, drawings, and procedures regarding duties to be performed.\n, • Participate in cross-training activities.\n, • Identify problems with documentation and initiate corrections and improvements for new and existing products and methods.\n, • Assist in transferring new product assemblies, instruments from product development into production.\n\n EDUCATION/ EXPERIENCE NEEDS: \n • High School education or equivalent.\n, • 3-5 years of experience in electro/mechanical assembly and test environment.\n, • Prior microscopic/ precision assembly experience.\n, • IPC-610 or J-STD-001 certification preferred\n, • Ability to work in a team environment\n, • Proficient computer skills\n, • Good interpersonal skills\n, • Experience with ERP Systems\n, • Experience with ISO-9001\n\n Teledyne and all of our employees are committed to conducting business with the highest ethical standards. We require all employees to comply with all applicable laws, regulations, rules and regulatory orders. Our reputation for honesty, integrity and high ethics is as important to us as our reputation for making innovative sensing solutions. Teledyne is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age, or any other characteristic or non-merit based factor made unlawful by federal, state, or local laws.

Job Description Industrial Hygienist Sibanye-Stillwater | Fairless Hills, PA Full time • Onsite Sibanye-Stillwater is seeking a hands-on Industrial Hygienist to support workplace health and safety across our processing operations. This role partners closely with operations and leadership to identify, evaluate, and control occupational health risks while strengthening a proactive safety culture in a dynamic plant environment. Ready to Make an Impact If you are passionate about protecting employee health, applying technical expertise in real world environments, and driving continuous improvement, this role offers meaningful impact and long-term growth. What You Will Do • Lead air quality, noise, chemical, dust, and ergonomic monitoring programs, • Conduct exposure assessments and recommend engineering, administrative, and PPE controls, • Evaluate ventilation and air handling systems to improve workplace conditions, • Support respiratory protection, chemical hygiene, and hearing conservation programs, • Track exposure data, analyze trends, and provide clear recommendations to leadership, • Deliver training that strengthens safe work practices across departments, • Partner with operations, maintenance, and EHS to ensure regulatory compliance, • Coordinate with external consultants, laboratories, and regulatory agencies as needed, • Support medical surveillance and other occupational health initiatives What You Bring • Bachelor’s degree in Industrial Hygiene, Environmental or Occupational Health, or related field, or equivalent relevant experience, • CIH certification preferred or willingness to obtain, • Three or more years of experience in manufacturing, recycling, chemical processing, or similar industrial environments, • Working knowledge of OSHA, NIOSH, ACGIH, and EPA standards, • Experience with industrial hygiene sampling equipment and data interpretation, • Strong communication and collaboration skills, • Ability to work effectively in a plant environment Schedule & Benefits • Monday through Friday, onsite at Fairless Hills, • Competitive pay and comprehensive benefits, • 401k with company match, • Paid holidays, vacation, sick time, personal holiday, and community days, • Stable, mission driven organization Compliance Requirements • Must meet ITAR and NAID eligibility requirements, • Ability to pass background screening and pre-employment drug testing Apply today and help us build a safer, more sustainable future. Powered by JazzHR V9MA4otXSg

Job DescriptionDescription: Senior Industrial Hygiene Technician – Industrial Hygiene Division TTI Environmental, Inc. is an integrated environmental services contractor and consulting firm. TTI services government, industrial, commercial, academic, financial, and private clients nationwide and is headquartered in Moorestown, New Jersey. TTI is seeking a full-time Senior Industrial Hygiene Technician to join our Industrial Hygiene Division. This is a hybrid position – working in the field with occasional trips to TTI’s Moorestown office. Facility based assignments are anticipated for this role. Current Industrial Hygiene certifications are preferred for this role; candidates should have related project experience with Asbestos, Lead Paint, and Indoor Air Quality investigation. Responsibilities • Inspection and on-site monitoring for asbestos, mold, lead paint, and indoor air quality, • Conduct detailed surveys for asbestos, lead based paint, right to know, and mold, • Perform air monitoring and contractor oversight during asbestos abatement projects, • Maintain, operate, and calibrate a variety of sampling and monitoring equipment, • Technical report writing and interpretation of analytical data, • Timeliness, time management, ability to meet deadlines, and responsiveness to emergencies are vital, • Current EPA/AHERA Asbestos Building Inspector accreditation preferred, • Lead licenses preferred, • Knowledge of general building mechanical systems and building construction, • High School or Mechanical/Trade School Diploma, • Associate or B.S. in Environmental Science preferred, • Exhibit clear, concise verbal and written communication skills, • General computer skills and working knowledge of Microsoft Office, • Asbestos, Lead Paint, and IAQ certifications are preferred, • 4 years’ relative industrial hygiene and field experience is preferred, • Ability to commute to remote sites as needed, • Willingness to work limited weekends and second shift, • Ability to perform field work and meet physical demands, • Must be able to carry up to 30 lbs. of equipment and use ladders, • Willingness to learn, complete training, and obtain various certifications, • Valid driver’s license and ability to successfully pass pre-employment screening and physical, • Matching 401(k) Retirement Plan, • Health, Dental, Vision, and Life Insurance, • Flexible Spending Accounts, • Paid Safety Training, • Paid Professional Certificate/License Fees, • Mileage Reimbursement, • Competitive Compensation TTI fosters a culture where leadership is approachable, support is accessible, and every voice is welcomed. Collaboration and teamwork guides how we solve problems and achieve shared goals, while diverse perspectives strengthen our decisions. We are committed to professional development, encouraging continuous learning and growth so every employee can reach their full potential. By prioritizing wellbeing and cultivating a forward-thinking mindset, we create an environment where people feel valued and can thrive in long-term success. Shift: Day and evening hours with occasional weekend work. TTI is an Equal Opportunity Affirmative Action Employer. Requirements:

Job DescriptionSalary: $65,000-$100,000 UTRS Advanced Manufacturing (UTRS AM) is currently seeking a Machine Shop Estimator to join our team! At UTRS AM, we enjoy the benefits of working in a collaborative environment of close-knit team members. As a company, we provide a wide range of leading-edge engineering, management, and digital services to the public and private sectors. We are looking for someone that will support our mission to consistently deliver creative, high-quality, technology-based services to our customers on time and within budget. This person is responsible for interfacing with our customers to coordinate and create estimates for complex machined parts and prototypes. This position is located at our UTRS Advanced Manufacturing division in Robbinsville, NJ in our clean, air-conditioned, well-equipped, modern shop. At this location, we specialize in short-run manufacturing of custom machinery and machine components. What will you be doing? This position will be a key member of the UTRS Advanced Manufacturing (UTRS AM) team. Key elements of the role are as follows: • Read and interpret client drawings, weld symbols, machining symbols, tolerances, specifications and calculate costs and realistic lead time, • Analyze drawings to prepare cost, material, and labor estimates in a timely manner, • Attend estimate kickoff meetings to determine the approach of bid opportunities., • Work with engineers and programmers to ensure quotes are accurate and can be executed technically, • Build relationship with outside vendors for quotes on services, • Work with teams post award to set up POs for materials/services and coordinate machining schedule, • Quote within an ERP system (Global Shop, E2, Acumatica) What skills will the ideal candidate have to be successful? This position will require the following skillsets and experience: • Must have good mechanical skills and experience., • Engineering experience a plus, • Minimum 3 years experience in a similar role or machine shop., • Proficient in reading and interpreting mechanical drawings., • High standard of quality and efficiency, • Effective communication and interpersonal skills, • Any milling/turning MFG experience would be beneficial., • Solid knowledge of shop mathematics, • Must be a team player, able to multitask and prioritize accordingly., • Basic PC knowledge (MS Outlook, Excel, Word), • Must be able to work in a physical capacity, lifting and moving heavy objects., • Must be a US Citizen, • Must have a valid drivers license., • High school diploma required; college degree not required but beneficial, • Past or present military personnel are encouraged to apply. Read about our benefits here:Our Benefits - UTRS | Always, Got Your Back UTRS is an Equal Opportunity employer. All qualified applicants will receive consideration for employment without regard to sex, gender identity, sexual orientation, race, color, religion, national origin, disability, protected Veteran status, age, or any other characteristic protected by law. UTRS is a drug-free workplace with pre-employment drug testing and background verifications. For more information or to apply now, go to the website below:

PURPOSE AND SCOPE: The professional registered nurse Outpatient RN CAP 1 is an entry level designation into the Clinical Advancement Program (CAP). This position is accountable and responsible for the provision and coordination of clinically competent care including assessment, planning, intervention and evaluation for an assigned group of patients. This may include delegation of appropriate tasks to direct patient care staff including but not limited to RNs, LVN/LPNs and Patient Care Technicians. As a member of the End Stage Kidney Disease (ESKD) health care team, this position participates in decision-making, teaching, leadership functions, and quality improvement activities that enhance patient care outcomes and facility operations. PRINCIPAL DUTIES AND RESPONSIBILITIES: All duties and responsibilities are expected to be performed in accordance with Fresenius Kidney Care policy, procedures, standards of nursing practice, state and federal regulations. Performs all essential functions under the direction of the Supervisor and with guidance from the Clinical Educator, Preceptor or in collaboration with other Registered Nurses. Performs ongoing, systematic collection and analysis of patient data pre - during - post hemodialysis treatment for assigned patients and documents in the patient medical record, makes adjustments or modifications to treatment plan as indicated and notifies Team Leader, Charge Nurse, Supervisor or Physician as needed. Assesses, collaborates, and documents patient/family's basic learning needs to provide initial and ongoing education to patients and family. Directs and provides, in collaboration with direct and ancillary patient care staff, all aspects of the daily provision of safe and effective delivery of hemodialysis therapy to assigned patients. Administers medications as prescribed or in accordance with approved algorithm(s), and documents appropriate medical justification and effectiveness. Initiates or assists with emergency response measures. Serves as a resource for health care team, participates in staff training and orientation of new staff as assigned. Ensures correct laboratory collection, processing and shipping procedures are performed and reschedules missed or insufficient laboratory collections. Identifies expected outcomes, documents and updates the nursing assessment and plan of care for assigned patients through collaboration with the Interdisciplinary Team. Ensures patient awareness related to transplant and treatment modality options. Required to complete CAP requirements to advance. Performs all other duties as assigned by Supervisor. PHYSICAL DEMANDS AND WORKING CONDITIONS: The physical demands and work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The position provides direct patient care that regularly involves heavy lifting, moving of patients and assisting with ambulation. Equipment aids and/or coworkers may provide assistance. This position requires frequent, prolonged periods of standing and the employee must be able to bend over. The employee may occasionally be required to move, with assistance, machines and equipment of up to 200 lbs., and may lift chemical and water solutions of up to 30 lbs. as high as 5 feet. The work environment is characteristic of a health care facility with air temperature control and moderate noise levels. May be exposed to infectious and contagious diseases/materials. Day to day work includes desk work, computer work, interaction with patients, facility/hospital staff and physicians. The position may require travel to training sites or other facilities. May be asked to provide essential functions of this position in other locations with the same physical demands and working conditions as described above. SUPERVISION: Assigned oversight of Patient Care Technicians/LPNs/LVNs/RNs as a Team Leader or designated Nurse in Charge, after meeting all the following: Successful completion of all FKC education and training requirements for new employees. Must have a minimum of 9 months experience as a RN. Must have a minimum of 3 months experience in chronic/acute hemodialysis as a RN. EDUCATION and LICENSURE: Graduate of an accredited School of Nursing. Current appropriate state licensure. Current or successful completion of CPR BLS Certification. Must meet the practice requirements in the state in which he or she is employed. EXPERIENCE AND REQUIRED SKILLS: Entry level for RNs with less than 2 years of Nephrology Nursing experience as a Registered Nurse. Chronic/acute hemodialysis experience (preferred). 'The rate of pay for this position will depend on the successful candidate's work location and qualifications, including relevant education, work 17perience, skills, and competencies. Hourly Rate: $33 - $56 Benefit Overview: This position offers a comprehensive benefits package including medical, dental, and vision insurance, a 401(k) with company match, paid time off, parental leave. Fresenius Medical Care maintains a drug-free workplace in accordance with applicable federal and state laws. EOE, disability/veterans by Jobble

Overview: Interstate Waste Services is the most progressive and innovative provider of solid waste and recycling services in the greater New York, New Jersey and Connecticut markets with a rail-served landfill in Ohio! IWS is committed to delivering high-quality waste, recycling and environmental services, while prioritizing the safety of our employees, customers and communities. We cater to a diverse range of industrial, medical and commercial/residential customers. Founded in 1998, IWS has grown over the years through acquisitions, many of which were family-owned businesses that remain a part of our team today. We're proud to combine the resources of a large company with the values and care of a family-run business. Essential Job Summary:: Our Diesel Mechanics perform inspection, diagnosis and repair of electrical, hydraulic, suspension, brake and air systems on vehicles and equipment, including diesel heavy trucks and engines. Performs preventive maintenance inspection (PMI); troubleshoots, repairs, and rebuilds major components on vehicles and equipment. Ensures accurate diagnosis and effective repair and/or replacement of components. Additional responsibilities include: Essential Job Functions: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Other minor duties may be assigned.: * Performs all work in accordance with established safety procedures. * Completes required paperwork utilizing fleet maintenance software program associated with repairing vehicles, documenting parts usage, and accounting for repair times. * Assists in the repair and adjustment of equipment. * Washes vehicles and equipment. * Conducts safety checks on vehicles. * Assists with service calls for breakdowns. * Perform other maintenance related work as required. * Maintain a clean, safe work area in compliance with Corporate / OSHA Standards. Requirements and Qualifications:: * 3-5+ years' experience as class A or B mechanic * Computer diagnostic experience is required * Prior experience from waste management industry or heavy equipment/yellow iron dealership experience is a plus * Trade school or similar training is a plus * Knowledge of safety procedures and practices Additional Information: This job description is intended to be an accurate representation of the general functions of the job, rather than exhaustive list of duties, responsibilities, or experience. Other duties may be assigned, requested, or required. Aspects of the job may be altered without notice. Interstate Waste Services provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Salary Range Minimum: USD $32.64/Hr. Salary Range Maximum: USD $32.64/Hr.

Join our Ewing, NJ office as a Managing Consultant, Air Quality & Environmental Compliance and become a trusted advisor to some of the world’s leading companies. Deliver on scope, budget, and schedule expectations while maintaining ERM’s quality standards. For the Managing Consultant, Air Qualit

Job Description PDM Group has a proud company history that dates back to 1935. One of our Founding Companies, Hearnen Air Conditioning was one of the first factory distributorships set up by Willes Carrier. We are a leading Industrial and Commercial Air Conditioning Heating and Ventilating Service provider. Our business was founded on responding quickly to our customer's needs, delivering good quality service and producing a positive result for our customers. We have an office with a fully staffed Service Department in Cranbury, NJ which provides HVAC Service and Maintenance to the Tri-State Area and beyond including Maryland which covers Metro Washington, DC and Northern Virginia. PDM Group has made its name providing the highest quality Engineering, Design Installation and Service. Our Engineering and Installation Department specializes in Design Build Applications from the simplest to the most complex including air conditioning, heating, piping and process systems guaranteed to meet your specifications. PDM Group sells, installs and services all major brands of HVAC Equipment including Process and Comfort Chillers. We specialize in control systems including Building Automation, Process Chillers, and Cooling Towers for the Plastics Industry and specialty equipment such as Desiccant Dehumidifiers for the Food, Pharmaceutical and Process Industries, Humidification Systems and Data Center Cooling Equipment. We set high standards for all our employees and sub-contractors. Their attitudes and skills are expected to reflect our company's commitment to exceed your expectations in everything we do. POSITION OVERVIEW: The Shop Receiving / Warehouse Worker is responsible for warehouse/yard organization and upkeep, equipment and material in-flows and out-flows. They ensure a smooth and efficient operational flow of materials and equipment. They utilize company's computer system to accurately receive materials and equipment and verify to Purchase Order system. RESPONSIBILITIES: Receive and label material deliveries to be staged in appropriate areas Maintain the cleanliness of warehouse, yard, building grounds and shop inventory Pick up parts and equipment from suppliers & deliver parts to jobs as necessary Mobilize equipment and materials for scheduled jobs Ability to drive truck and trailers to off-site locations Accurately confirm materials and equipment to Purchase Orders and Workorders Performs additional duties and responsibilities to help facilitate company operations MINIMUM QUALIFICATIONS: Education/Experience: General Computer skills and experience Valid driver's license and clean driving record Able to lift 50+ pounds Preferred Qualifications CDL (class A preferred) Forklift experience Experience using a Shipping/Receiving software Basic tool and equipment knowledge, use and skills General mechanical abilities Ability to multitask in a fast-paced environment Verbal & written communication skills Attention to detail and organization Salary Range: $20-$25 hourly PDM Group is an Equal Opportunity Employer with a strong commitment to the achievement of excellence and diversity among its workforce. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, protected veteran status, or any other characteristic protected by law.

McHales, proudly serving Levittown, PA for more than 70 years, is seeking service professionals who do more than repairs- technicians who take pride in offering solutions that enhance comfort, efficiency, and indoor air quality. Are you an experienced Residential HVAC Service Technician who enjoys t

Sales Account Executive (Laboratory Testing). Knowledge and understanding of environmental laboratory testing is ideal, specifically in indoor air quality testing, USP797 testing or Legionella testing. Establishes and maintains a productive working relationship between the client and laboratory.

Job DescriptionSalary: $21-$37 per hour UTRS Advanced Manufacturing (UTRS AM) is currently seeking CNC Machinist to join our team! At UTRS AM, we enjoy the benefits of working in a collaborative environment of close-knit team members. As a company, we provide a wide range of leading-edge engineering, management, and digital services to the public and private sectors. We are looking for someone that will support our mission to consistently deliver creative, high-quality, technology-based services to our customers on time and within budget. This position will be responsible for CNC programming, setup, and operations. This position is located at our division in Robbinsville, NJ in our clean, air-conditioned, well-equipped, modern shop. At this location, we specialize in short-run manufacturing of custom machinery and machine components. What will you be doing? This position will be a key member of the UTRS Advanced Manufacturing (UTRS AM) team. Duties include: • CNC Operations, both Vertical and Horizontal Machining Centers., • Program, edit, setup, and run parts on machine independently, • Operate multiple machines, depending on the task, • Gibbs programing experience a plus, • HAAS, Mazak and Fanuc experience a plus, • Be able to complete in-process inspections in open setup (micrometers, calipers, thread measurements) and optical comparator (angles and overlays), • Be able to inspect parts coming off CNC machines for visual defects and workmanship, • Experience interpreting blueprints, basic knowledge of GD&T, • Deburr and clean components before & after machining operations where needed What skills will the ideal candidate have to be successful? This position will require the following skillsets and experience: • Must have good mechanical skills and experience, • Minimum 5 years of experience in a similar role, • High standard of quality and efficiency, • Effective communication and interpersonal skills, • Any milling/turning MFG experience would be beneficial., • Solid knowledge of shop mathematics, • Must be a team players, able to multitask and prioritize accordingly, • Basic PC knowledge (MS Outlook, Excel, Word), • Must be able to work in a physical capacity, lifting and moving heavy objects, • Must be a US Citizen, • Must have a valid drivers license, • High school diploma required; college degree not required but beneficial, • Past or present military personnel are encouraged to apply UTRS is an Equal Opportunity employer. All qualified applicants will receive consideration for employment without regard to sex, gender identity, sexual orientation, race, color, religion, national origin, disability, protected Veteran status, age, or any other characteristic protected by law. UTRS is a drug-free workplace with pre-employment drug testing and background verifications. For more information or to apply now, go to the website below:

Job DescriptionBenefits: • 401(k) matching, • Dental insurance, • Health insurance, • Paid time off, • Vision insurance, • 401(k), • Competitive salary, • Free uniforms, • Opportunity for advancement AID is nationally recognized for its quality of work and expertise in: • Non-destructive testing and evaluation (NDT/E) of highway, airfield, port, rail, and vertical infrastructure, • Pavement evaluation and design, • Unmanned Aircraft Systems (UAS) mapping, • Geotechnical design and subsurface investigation, • Subsurface and utility mapping, • Transportation materials testing & lab services Grow with Us: Opportunities in Pavement Engineering! AID's Pavement Engineering practice area is expanding, and we're looking for talented and motivated individuals to join our dynamic team. We have exciting full-time opportunities for highly experienced Technical Leads/Project Managers. We offer great benefits and are committed to finding the right fit. The availability of in-person (Central New Jersey), remote, or hybrid work arrangements will be dependent on the specific requirements and responsibilities of the position. Responsibilities (Vary by Role & Experience): Our Pavement Engineering team is involved in the full life-cycle of projects. Depending on your experience level and the specific role, your responsibilities could include: • Project Execution & Technical Work:, • Performing, coordinating, and managing fieldwork operations., • Analyzing diverse field data (including GPR, FWD, and distress surveys)., • Developing pavement design recommendations using methodologies such as the 1993 AASHTO Pavement Design Guide, AASHTO Mechanistic-Empirical Pavement Design Guide, AASHTOWare Pavement-ME, and FAARFIELD., • Assisting in or leading the preparation of technical project reports., • Engaging in various project types, including pavement testing, evaluation, design, and management., • Leadership & Management (for senior roles):, • Providing technical oversight and optimizing processes within the Pavement Engineering practice., • Managing multiple, concurrent projects, ensuring quality, budget, and schedule adherence., • Preparing comprehensive technical and cost proposals., • Supervising, mentoring, and developing engineers and other technical staff., • Contributing to the growth of the practice area through marketing, business development, and client relations. Core Requirements for All Candidates: o B.S.C.E. degree or higher. o Proficiency in technical writing and verbal communication. o Proficiency with the MS Office suite. o A proactive attitude and ability to "hit the ground running." o Familiarity and working knowledge with AIDs advanced technologies (as described above) are highly desirable. For Technical Lead/Project Manager Roles (Senior-Level): o At least 10 years of progressive experience in the pavement engineering consulting industry. o Professional Engineer (P.E.) license is required. o Thorough, practical, and in-depth knowledge of pavement engineering principles and design methodologies. o Proven experience in project management, proposal preparation, and staff supervision. o Experience with pavement management and related software is a plus. o Familiarity and working knowledge with Artificial Intelligence technologies are desirable. Compensation & Benefits: AID offers a competitive compensation package tailored to your experience and the role you fit: • For senior-level roles (e.g., Technical Lead/Project Manager), the anticipated pay range is $130,000 - $170,000 per year. Higher compensation may be considered for candidates who bring exceptional credentials and value., • For other engineering roles, pay will be competitive and commensurate with qualifications, relevant experience, and education., • All full-time positions include a comprehensive benefits package., • Historically, AID awards mid-year and end-of-year bonuses based on employee and company performance.Why Join AID? Be part of a nationally recognized leader in infrastructure assessment. Work with cutting-edge NDT technology. Contribute to vital projects that keep our nation's infrastructure safe and functional. Join a growing company with a collaborative team environment and significant growth potential. Opportunities for professional development and career advancement. How to Apply: If you are passionate about pavement engineering and eager to contribute to a leading firm, we encourage you to apply! Please email your resume and a cover letter to . In the subject line of your email, please use: "Application: Pavement Engineering Opportunities at AID". In your cover letter or email, please: 1. Briefly outline the type of role or level of responsibility you are seeking (e.g., Senior Engineer, Project Manager, Technical Lead)., 2. Highlight your key credentials that align with our needs., 3. Mention your preferred work arrangement (in-person, remote, or hybrid), understanding that suitability for remote/hybrid work varies by position. AID is an Equal Opportunity Employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. Flexible work from home options available.

Job DescriptionCompany Description Eurofins Scientific is an international life sciences company, providing a unique range of analytical testing services to clients across multiple industries, to make life and our environment safer, healthier and more sustainable. From the food you eat, to the water you drink, to the medicines you rely on, Eurofins laboratories work with the biggest companies in the world to ensure the products they supply are safe, their ingredients are authentic, and labelling is accurate. Eurofins is dedicated to delivering testing services that contribute to the health and safety of society and the planet, and to its corporate responsibility to protect the environment and ensure diversity, equity, and inclusion across the entire network of Eurofins companies. Job Description The Sales Account Executive is a client facing outside sales role operating within an assigned region of the Mid-Atlantic states. This involves identifying and managing client accounts and business opportunities for Eurofins Built Environment Testing Division. Built Environment is a group of laboratories that provides Indoor Air Quality (IAQ) testing for things such as mold, asbestos, Legionella, etc. The Account Executive will travel throughout the region to meet with clients. This individual must be comfortable with cold calling and taking initiative to bring in new business as well as cultivate existing relationships. Knowledge and understanding of environmental laboratory testing is ideal, specifically in indoor air quality testing, USP797 testing or Legionella testing. This role will travel throughout the territory (New York, Pennsylvania, New Jersey). Approximately 50% travel. As part of the sales team, you will focus on: • Maximizing market share, profitability, competitive advantage and capacity utilization in the environmental analytical services market., • Establish and maintain productive relationships with Eurofins clients., • Provide vision and acquire new accounts to sustain growth of the business by representing Eurofins, clearly communicating Eurofins services to new customers and markets., • Identify opportunities and profitable work by following up on leads, negotiating, and closing., • Responsible for meeting individual revenue as well as the goal for assigned region., • Establishes and maintains a productive working relationship between the client and laboratory., • Ensures customer awareness of Eurofins Environment Testing capabilities and services to improve selling opportunities., • Provides sales plan forecast for assigned region., • Reviews credit status of both new and existing customers prior to submitting bids or proposals for new work., • Monitors accounts receivable status for accounts assigned and resolves collection issues as required., • Develops and recommends strategies to facilitate pricing and bid/no bid decisions, establish Master Service agreements and provide budgetary information., • Develops client profiles and determines potential and ability to fund work., • Develops, qualifies, tracks, and closes leads to increase revenue., • Reports sales activity within assigned area., • Updates customer databases to identify business opportunities., • Maintains productive relationships between customers and the Eurofins Environment Testing organization., • Develops and implements account plans detailing specific clients, revenue goals and related account objectives to attain regional revenue quotas., • Identifies key target markets and major accounts and develops strategies within assigned area of responsibility to attain market position for Eurofins Environment Testing and maintain profitability., • Establishes, coordinates, negotiates, and completes Master Service, • Agreements with customers which both defines customers’ specific needs and streamline processes., • Within area of market responsibility collects and documents information to establish pricing and evaluate Eurofins Environment Testing’s ability to meet customer requirements to meet win/loss ratios, average discount percentages and profitability., • Effectively communicates customer needs and wants to Eurofins Environment Testing, • Customer Service Managers and Project Managers to facilitate successful completion of work., • Completes summaries of sales development activities as directed by GM., • Communicates all business opportunities (e.g. bids, quotes, proposals, and pricing inquires) by providing copies or entering information into Eurofins Environment Testing’s database., • Follows up on all outstanding bids, quotes, proposals, and price inquiries in order to achieve successful completion of the sales cycle., • Negotiates pricing and contractual issues within area of responsibility with the approval of the GM., • Presents Environment Testing as a network of laboratories not limited to lab facilities within a geographical region to improve operational efficiencies., • Controls expenses with respect to the selling function pursuant to Eurofins Environment Testing’s policy and with approval by GM., • Assumes role as “sponsor” for National Accounts as needed., • Provides feedback on market conditions within area of responsibility to facilitate the development of new products and services., • Maintains relationship with one or more of Eurofins Environment Testing’s network facilities to sustain awareness of operational issues related to Eurofins Environment Testing’s ability to meet customer requirements., • Provides information concerning business opportunity outcomes with respect to win/lose ratios and future pricing strategies., • Provides forecasting information to Customer Service Managers to assist operational staff with resource and operational planning., • Assists with the development of sales materials., • Gathers and communicates intelligence information on competitors within area of responsibility., • Identifies and communicates opportunities for new products and services within assigned region.Qualifications Basic Minimum Qualifications: • Degree in Sciences or related field preferred but not required, • Minimum 2-3 years progressively successful sales experience in a service industry, • Ability and willingness to travel throughout the assigned territory. Approximately 50% travel. Some overnight travel may also be required., • Environmental industry knowledge., • Sales specific skills of identification of prospects, interviewing, negotiating, and closing, • Strong interpersonal skills, • Excellent written and verbal communication skills, • Sales acumen/sales skills, • Lab experience and exposure to environmental industry preferred., • Writing sales and account plans, • Working computer skills, • Familiarity with lab functions and terminology, • Analytical skills, • Planning skills, • Self-directed, • Ability to work in an unstructured environment Additional Information Requirements: • Authorization to work in the United States indefinitely without restriction or sponsorship Salary Range: minimum of $70,000/yr base + Commission with benefits, PTO and company matching 401K plan. **Salary range could be higher for candidates with specific sales experience in environmental testing, especially Indoor Air Quality (IAQ) testing. Eurofins Environment Testing (USA) provides a compensation range for informational purposes, the actual base salary may vary based upon, but not limited to, relevant experience and skill set, base salary of internal peers, business sector, and geographic location. As a Eurofins employee, you will become part of a company that has received national recognition as a great place to work. we offer excellent benefits including comprehensive medical coverage, life and disability insurance, 401(k) with company match, paid holidays, paid time off, and dental and vision options. *The benefits package offered will vary based on the employee's full-time or part-time regular status. To learn more about Eurofins, please explore our website . We support your development! Do you feel you don’t match 100% of the requirements? Don’t hesitate to apply anyway! Eurofins companies are committed to supporting your career development. We embrace diversity! Eurofins network of companies believe in strength and innovation through diversity, being an Equal Opportunity Employer. We prohibit discrimination against employees or applications based on gender identity and/or expression, race, nationality, age, religion, sexual orientation, disability, and everything else that makes employees of Eurofins companies unique. Sustainability matters to us! At Eurofins, we believe sustainability is at the heart of everything we do. Guided by our vision to be the Global Leader in “Testing for Life,” our mission to contribute to a healthier and safer world, and our core values, we are building a strong foundation for Environmental, Social, and Governance (ESG) initiatives. Eurofins’ commitment to sustainability begins within our own companies through a shared responsibility to people and the planet. With climate change posing an imminent threat, Eurofins and its many companies recognize their duty to proactively reduce or offset the environmental impact of essential operations while also helping our clients do the same—serving as a true ESG Enabler. Find out more in our career page: Company description: Eurofins Scientific is an international life sciences company, providing a unique range of analytical testing services to clients across multiple industries, to make life and our environment safer, healthier and more sustainable. From the food you eat, to the water you drink, to the medicines you rely on, Eurofins laboratories work with the biggest companies in the world to ensure the products they supply are safe, their ingredients are authentic and labelling is accurate. The Eurofins network of companies is the global leader in food, environment, pharmaceutical and cosmetic product testing and in discovery pharmacology, forensics, advanced material sciences and Eurofins Scientific 2/2 March 2023 agroscience contract research services. It is one of the market leaders in certain testing and laboratory services for genomics, discovery pharmacology, forensics, advanced material sciences and in the support of clinical studies, as well as having an emerging global presence in Contract Development and Manufacturing Organisations. It also has a rapidly developing presence in highly specialised and molecular clinical diagnostic testing and in-vitro diagnostic products. In over 35 years, Eurofins has grown from one laboratory in Nantes, France to 61,000 staff across a decentralised and entrepreneurial network of ca. 900 laboratories in 61 countries. Eurofins companies offer a portfolio of over 200,000 analytical methods to evaluate the safety, identity, composition, authenticity, origin, traceability and purity of biological substances and products. In 2025, Eurofins generated total revenues of EUR 7.296 billion, and has been among the best performing stocks in Europe over the past 20 years. Eurofins USA Environment Testing is a Disabled and Veteran Equal Employment Opportunity employer.

Job Description Bergey’s Inc. is a family-owned business that has been servicing our customers’ needs since 1924. Currently our company has over 50 locations and more than 1,800 team members. Today our family of automobile, truck and tire companies stretch throughout Pennsylvania, Delaware, Maryland, & New Jersey. Visit us at to learn more about our company. We strive to provide an environment for our associates and customers that is welcoming, transparent, and forward thinking. Our employees are our greatest asset. We promote and develop individual strengths, as well as grow our employees personally and professionally. Together we can make a difference. We are looking for a Mobile Maintenance Technician to operate an on-road service truck (bay on wheels) and assist customers with warranties, preventive maintenance, and repair services on medium- and heavy-duty vehicles. This role is a Tuesday-Saturday opportunity. This role requires traveling to customer facilities or distribution centers to deliver high-quality mobile service. Pay: $30.00 - $37.00 per hour based on experience Location: Bergey's Truck Center-Trenton, NJ Key Responsibilities: • Perform scheduled preventive maintenance (PM) services, DOT inspections, and follow-up repairs on light-, medium-, and heavy-duty vehicles in a field environment., • Diagnose, adjust, and repair truck systems, including:, • Electrical, wiring, and cooling systems, • Starters, alternators, fan clutches, and engine electronics, • Air conditioning systems, • Diesel and gas engines, transmissions (manual/automatic), clutches, differentials, • Hydraulic and steering systems, air brake systems, • Collect and document repair information; communicate effectively with customers, vendors, and internal teams., • Upload pictures, parts usage, and repair findings into Repair Orders (“RO”) using a company-issued iOS device and our proprietary TRAIT application., • Complete all DOT and company documentation accurately and on time., • Maintain and operate a company-issued service truck, including safety checks and pre-/post-trip inspections., • Work independently, managing your own schedule and productivity while meeting Standard Repair Times., • Mechanical repair experience 2 years minimum (diesel, automotive, or related field)., • Willingness to learn about our products and systems., • Self-motivated with strong initiative., • Clean driving record and current DOT Medical Card., • Possess and supply a set of hand tools required for the job., • Basic understanding of:, • Electrical systems and wiring, • Air conditioning systems, • Engines (gas and diesel), • Air brake systems, • No after-hours emergency call-outs – enjoy work-life balance., • Take your service truck home daily (stop paying for gas!)., • Company-provided laptop and cellphone., • Uniforms with laundry service provided., • Safety boots and safety glasses reimbursement., • Extreme weather gear (hot and cold)., • Opportunities to work independently and grow with a supportive team., • Vacation and PTO time, • Paid Holidays, • 401k with profit sharing, • Medical, Dental and Vision insurance., • Employee Assistant Program, • FSA and HSA Plans, • Life Insurance, • Opportunities for Advancement, • Paid Training, • Employee Referral Program, • Employee Discount

Job Description Bergey’s Inc. is a family-owned business that has been servicing our customers’ needs since 1924. Currently our company has over 50 locations and more than 1,800 team members. Today our family of automobile, truck and tire companies stretch throughout Pennsylvania, Delaware, Maryland, & New Jersey. Visit us at to learn more about our company. We strive to provide an environment for our associates and customers that is welcoming, transparent, and forward thinking. Our employees are our greatest asset. We promote and develop individual strengths, as well as grow our employees personally and professionally. Together we can make a difference. Benefits: We offer a generous benefit package including: • Vacation and PTO time, • Paid Holidays, • 401k with profit sharing, • Medical, Dental and Vision insurance., • Employee Assistant Program, • FSA and HSA Plans, • Life Insurance, • Opportunities for Advancement, • Paid Training, • Employee Referral Program, • Employee Discount, • Tool Program Available Summary: A Diesel Mechanic diagnosis, repair, and failure analysis of all systems at the highest level as well as a supporting the team member. Pay: $25-$45 / hour Essential Duties: • Aftertreatment: Regen system, SCR system, and EGR system, • Engine: Replacement, overhaul, and component replacement, • Drivetrain: Clutch, transmissions, driveline, suspension systems, and differentials, • Electrical: proficient in electrical diagnostics including circuit failures and datalink circuits, • Bendix/Wabco: Crash avoidance system, sensors, and air system, • Diesel Mechanics work on their own and provides assistance and guidance to other technicians, • Diesel Mechanic must be proficient in assist consistently adding quality notes and pictures to cases, requesting parts, and workflow repair orders properly, • Diesel Mechanic must be able to understand estimates and assist/alert service team if adjustments are needed, • Experience: 5+years / All Manager’s discretion, • Master status for at least one manufacturer, • Must have a valid Driver's License

Job Description Bergey’s Inc. is a family-owned business that has been servicing our customers’ needs since 1924. Currently our company has over 50 locations and more than 1,800 team members. Today our family of automobile, truck and tire companies stretch throughout Pennsylvania, Delaware, Maryland, & New Jersey. Visit us at to learn more about our company. We strive to provide an environment for our associates and customers that is welcoming, transparent, and forward thinking. Our employees are our greatest asset. We promote and develop individual strengths, as well as grow our employees personally and professionally. Together we can make a difference. We are looking for a Sr. Mobile Diesel Technician to operate an on-road service truck (bay on wheels) and assist customers with warranties, preventive maintenance, and repair services on medium- and heavy-duty vehicles. This is a Monday-Friday opportunity. This role requires traveling to customer facilities or distribution centers to deliver high-quality mobile service. Pay: $35.00 - $43.00 per hour based on experience Location: Bergey's Truck Center-Trenton, NJ Key Responsibilities: • Perform scheduled preventive maintenance (PM) services, DOT inspections, and follow-up repairs on light-, medium-, and heavy-duty vehicles in a field environment., • Diagnose, adjust, and repair truck systems, including:, • Electrical, wiring, and cooling systems, • Starters, alternators, fan clutches, and engine electronics, • Air conditioning systems, • Diesel and gas engines, transmissions (manual/automatic), clutches, differentials, • Hydraulic and steering systems, air brake systems, • Collect and document repair information; communicate effectively with customers, vendors, and internal teams., • Upload pictures, parts usage, and repair findings into Repair Orders (“RO”) using a company-issued iOS device and our proprietary TRAIT application., • Complete all DOT and company documentation accurately and on time., • Maintain and operate a company-issued service truck, including safety checks and pre-/post-trip inspections., • Work independently, managing your own schedule and productivity while meeting Standard Repair Times., • Mechanical repair experience 3+ years (diesel, automotive, or related field)., • Willingness to learn about our products and systems., • Self-motivated with strong initiative., • Clean driving record and current DOT Medical Card., • Possess and supply a set of hand tools required for the job., • Basic understanding of:, • Electrical systems and wiring, • Air conditioning systems, • Engines (gas and diesel), • Air brake systems, • No after-hours emergency call-outs – enjoy work-life balance., • Take your service truck home daily (stop paying for gas!)., • Company-provided laptop and cellphone., • Uniforms with laundry service provided., • Safety boots and safety glasses reimbursement., • Extreme weather gear (hot and cold)., • Opportunities to work independently and grow with a supportive team., • Vacation and PTO time, • Paid Holidays, • 401k with profit sharing, • Medical, Dental and Vision insurance., • Employee Assistant Program, • FSA and HSA Plans, • Life Insurance, • Opportunities for Advancement, • Paid Training, • Employee Referral Program, • Employee Discount Bergey's is an Equal Opportunity Employer.

Job Description Press Operator Facility: Trenton Plants, Runflat Division General Description The Press Operator is responsible for running maximum production on the presses. He or she will be accountable for putting the correct VFI into the press, taking it out after the cycle is complete, cleaning it, and putting it in its designated area. Specific Duties • Follow all applicable environmental, health and safety rules and procedures and immediately report all dangerous situations, near-misses, and injuries., • Participate in developing and updating risk assessments and review all applicable risk assessments annually., • Removing the VFI from the press when the press time cycle is finished., • Trimming and cleaning the VFI so it will be ready to ship., • Loading the catwalk with VFIs., • Follow instructions from the Shift Leader, Supervisor, and/or Manager., • When removing the holding rings from the VFI, put them in the designated area., • Pull the poly cable from the top of the VFI bottom before putting in the press., • Let the Shift Leader or Supervisor know when a VFI needs to go to Quality Control for repair., • Keep work area clean and orderly including behind the presses. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. Qualifications • Previous experience working in a production environment preferred., • Must be able to work in a non-air conditioned environment for a minimum of eight (8) hours per day., • Bi-lingual is a plus. Physical Requirements • Must be able to stand, walk up and down stairs for up to 8 hours per day. Must be able to lift and carry 80 pounds. Ergonomics are 95% standing or walking and 0% sitting and 5% using a keyboard. Must be able to communicate to instruct, train, or assist employees. Must be able to twist, turn, bend and work at a rapid pace. Must have 20/20 vision with correction for inspecting. Reasonable accommodations may be considered on a case by case basis., • Heavy Work: Exerting 50 to 100 pounds of force occasionally, and/or 25 to 50 pounds of force frequently, and/or 10 to 20 pounds of force constantly. Personal Protective Equipment The following list of PPE is required while in the manufacturing area. • Safety Glasses conforming to ANSI Z87.1 or higher, • Steel Toe Safety Shoes conforming to OSHA General Industry Standards 29 CFR 1910, • Hearing protection conforming to OSHA General Industry Standards 29 CFR 1910 Hutchinson Industries, Inc. is an equal opportunity employer. This position is non-exempt. Hutchinson Industries, Inc. reserves the right to modify the job description based upon its needs and may require the employee to perform functions beyond those mentioned above. Neither this job description nor any other communication creates an employment contract between Hutchinson Industries, Inc. nor the employee, and either one may terminate employment without notice at any time.

Job Description Facility: Trenton Plants General Description The CNC Machinist is responsible to effectively setup and operate the CNC equipment to which they are assigned, safely and efficiently. He/she must be able to read and understand drawing/prints. He/she must be able to use Quality Control measuring tools to ensure a quality product is produced. He/she must understand “G” & “M” codes and be able to edit machine programs. Specific Duties • Follow all applicable environmental, health and safety rules and procedures and immediately report all dangerous situations, near-misses, and injuries., • Participate in developing and updating risk assessments and review all applicable risk assessments annually., • Read and understand the drawings/prints required for the assigned job, including but not limited to size and tolerance and finish requirements associated with the operation being set up., • Know how to use micrometers, calipers, height gauges, depth gauges, and any other measuring device required to ensure a quality product is being produced., • Knowledge of basic “G” & “M” codes and ability to read and edit machine programs at the machines. Basic computer skills to upload and download machine programs., • Demonstrate the ability to instruct an operator in the loading, machining process, unloading, deburring and any other functions required to complete the operation step for the part being set up., • Help operators address any “issues” that may arise during the machining process including, but not limited to, making adjustments for tool wear and changing tools when they become dull or broken., • Ability to use or learn to use a computer to enter production information into a production tracking system., • Ability to complete paperwork requirements for each operation, including setup sheets and Serial Number Tracking Sheet and any others that might be required for the operators to assume responsibility for the operation of the equipment being set up., • Must keep work area clean, neat and orderly as required to maintain a safe and clean work environment., • Strive to improve workstation performance, reducing part-to-part times, increasing production efficiency, decreasing setup times through more efficient fixtures, work holding and tooling. Always work to improve quality at all levels., • Take directions from immediate supervisor and designated management representatives. Qualifications • Advanced CNC machining skills, including work holding, tooling, setup, fixture and tool offsets and program editing is required. Being able to hold close tolerances as required., • Knowledge of quality control measuring tool is required., • Ability to read and understand manufacturing – assembly drawings is required., • Good communication skills are required., • Ability to lift 70 pounds on a regular basis, as much as ten times an hour., • Must be able to work in a non-air conditioned environment for a minimum of eight (8) hours per day. Personal Protective EquipmentThe following list of PPE is required while in the manufacturing area. • Safety Glasses conforming to ANSI Z87.1 or higher, • Steel Toe Safety Shoes conforming to OSHA General Industry Standards 29 CFR 1910, • Hearing protection conforming to OSHA General Industry Standards 29 CFR 1910 Hutchinson Industries, Inc. is an equal opportunity employer. This position is non-exempt. Hutchinson Industries, Inc. reserves the right to modify the job description based upon its needs and may require the employee to perform functions beyond those mentioned above. Neither this job description nor any other communication creates an employment contract between Hutchinson Industries, Inc. nor the employee, and either one may terminate employment without notice at any time.

Job Description Overview Pay: $20.00 per hour + commission Earning potential: $22 – $30/hour on average with commission Schedule: Dayshift weekday & weekend hours Location: Ocean - Monmouth - Mercer - Middlesex counties Part-time and full-time opportunities available Air Experts, part of the ARS family of brands, provides expert HVAC services. We serve customers in the state of New Jersey with reliable, professional service. For over 30 years, we’ve delivered top-tier comfort solutions, supported by ARS’s national strength and a commitment to local care. We’re hiring outgoing Retail Sales Associates to represent ARS inside major home improvement retail locations by introducing customers to our home comfort solutions, energy-saving upgrades, and indoor air quality services. Why Join ARS * Weekly pay via direct deposit * Commission opportunities in addition to hourly pay * Paid training — no prior HVAC experience required * Flexible part-time and full-time scheduling * Career advancement opportunities into Comfort Advisor and in-home sales roles Full-time employees also receive: * Medical coverage available after 31 days * Low-cost health plans starting at about $5/week * Dental and vision coverage options * Health Savings Account (HSA) and Flexible Spending Account (FSA) options * 401(k) retirement plan with company match * Paid time off and paid holidays * Company-paid life insurance Responsibilities As a Retail Sales Associate, your focus will be introducing homeowners to ARS services while they shop. * Starting friendly conversations with shoppers about home comfort, energy efficiency, and indoor air quality * Explaining how ARS helps homeowners with heating, cooling, and home comfort improvements * Offering customers the opportunity to schedule a free in-home consultation * Entering customer information and booking appointments for ARS specialists * Representing ARS with a positive, professional presence inside the store * Working alongside store management and ARS team members to support in-store promotions Qualifications What We’re Looking For * Comfortable approaching and speaking with customers in a retail environment * Positive, energetic personality with strong people skills * Sales or retail experience is helpful but not required * Ability to stand or walk for extended periods during shifts * Reliable transportation to the assigned retail location * Availability for weekend retail hours and some holidays * Professional appearance suitable for a retail environment * Must be at least 18 years old and pass a background check * Willingness to attend weekly team meetings For questions about the role, you may contact our management team at XX *This posting provides details on potential compensation ranges and possibilities. These amounts are not guaranteed and should in no way be construed as an offer. *Sign-On Bonuses only available for roles that have them advertised; amounts are depending on experience and will be paid out according to an offer letter addendum. American Residential Services is an Equal Opportunity Employer. We do not discriminate based on race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or other protected characteristics. For more information about how we collect and use personal information, see our privacy policy here: .

Job Description At Ace Designs, we love what we do! For over 35 years, we have been in the retail display business where we have established an outstanding reputation for quality and service. Our clients range from large retail chains to smaller boutiques, which allows us accommodate projects big and small. We pride ourselves on being leaders in ingenuity and problem solving as well as delivering on time and on budget. Our products are all custom and manufactured in our building, so we get to see our concepts come to life on a daily basis. To learn more about us visit our website at . We are looking for skilled and capable candidates to be Woodworkers for our first shift, Monday to Friday, 8:00 am – 5:00 pm. To be considered for this position you must have the following: • 2- 5 years’ experience working with wood and sheet products, • Must be proficient with table saws, spindle shapers, both hand held routers and router tables, • Know how to operate power equipment including Air Tools and Electric Table Saws, • Ability to accurately measure a must, • Be detail oriented and maintain quality standards, • Thrive in a fast paced, highly dynamic environment Responsibilities: • Woodcutter, • Cutting wood into different pieces and shapes using various equipment., • Select the appropriate materials, fittings, and tools for each task., • Cutting resources down to size, as needed., • Planning an effective approach to work to ensure that each project is completed on time., • Creating standard and custom components., • Gathering the elements and assembling the final product., • Applying sealant, varnish, and paint, if required., • Inspect each completed item to ensure that it has been cut accurately and that the necessary finishes have been applied If you have these qualifications and are driven to succeed, please email your resume with compensation requirements. We are a drug-free environment and employment is contingent upon successful drug screening. Company DescriptionFor over 35 years, we have been in the manufacturing of retail display business where we have established an outstanding reputation for quality and service. Our clients range from large retail chains to smaller boutiques, which allows us to accommodate projects big and small. We pride ourselves on being leaders in ingenuity and problem solving as well as delivering on time and on budget. Our products are all custom and manufactured in our building, so we get to see our concepts come to life on a daily basis. Every day we make the impossible possible with our outstanding design and production team. To learn more about our exciting work visit our website at over 35 years, we have been in the manufacturing of retail display business where we have established an outstanding reputation for quality and service. Our clients range from large retail chains to smaller boutiques, which allows us to accommodate projects big and small. We pride ourselves on being leaders in ingenuity and problem solving as well as delivering on time and on budget. Our products are all custom and manufactured in our building, so we get to see our concepts come to life on a daily basis. Every day we make the impossible possible with our outstanding design and production team. To learn more about our exciting work visit our website at .

Job DescriptionBenefits: • 401(k), • Health insurance Responsibilities As a Midas automotive technician, youll be exposed to and have responsibility for performing a wide range of diagnostics, repairs and maintenance, including: • Diagnostics using state-of-the-art computer systems, • Tires and tire repair, • Car heating and air conditioning, • Steering and suspension, • Belts and hoses, • Radiator and engine cooling systems, • Batteries, starting and charging, • Steering and suspension, • Brakes and brake repair, • Oil changes, • Check engine light, • Mufflers and exhaust services, • Visual safety and courtesy inspectionsQualifications, • Ability to repair vehicles independently, while also having experience working well in a team environment, • Knowledge in automotive brakes, exhaust, suspension, & engine diagnostics, • Track record of high personal productivity, • Knowledge of, and adherence to, safety and environmental standards for repair facilities, • Experience using shop equipment such as lifts, tire changing equipment, alignment machines and scan tools, • High School Diploma or equivalent - technical degree a definite plus, • State-specific auto repair certifications, • Valid drivers license, • Own tools/equipment (diagnostic scanner / tools preferred also), • Able to service both foreign and domestic vehicles

Job Description PDM Group has a proud company history that dates back to 1935. One of our Founding Companies, Hearnen Air Conditioning was one of the first factory distributorships set up by Willes Carrier. We are a leading Industrial and Commercial Air Conditioning Heating and Ventilating Service provider. Our business was founded on responding quickly to our customer's needs, delivering good quality service and producing a positive result for our customers. We have an office with a fully staffed Service Department in Cranbury, NJ which provides HVAC Service and Maintenance to the Tri-State Area and beyond including Maryland which covers Metro Washington, DC and Northern Virginia. PDM Group has made its name providing the highest quality Engineering, Design Installation and Service. Our Engineering and Installation Department specializes in Design Build Applications from the simplest to the most complex including air conditioning, heating, piping and process systems guaranteed to meet your specifications. PDM Group sells, installs and services all major brands of HVAC Equipment including Process and Comfort Chillers. We specialize in control systems including Building Automation, Process Chillers, and Cooling Towers for the Plastics Industry and specialty equipment such as Desiccant Dehumidifiers for the Food, Pharmaceutical and Process Industries, Humidification Systems and Data Center Cooling Equipment. We set high standards for all our employees and sub-contractors. Their attitudes and skills are expected to reflect our company's commitment to exceed your expectations in everything we do. Commercial Service Plumber Responsibilities Responsible for service and installation of commercial plumbing systems Ability to work on septic and commercial sewer systems Perform plumbing preventative maintenance service for contract customers Ability to work with tablet-based service ticket software system Ability to work overtime in peak seasons and join the plumber on-call rotation Education/Experience High School diploma or GED Preferred Qualifications Installation and repair of commercial rough plumbing and plumbing fixtures including sinks, toilets, bathtubs, water heaters, and water softeners Experience with installation and repair of water treatment equipment, piping and controls Experience with installation and repair of underground storm sanitary and water piping system Professional, ethical, and a team player willing to grow with the company Journeyman plumber preferred Knowledge of plumbing codes EARN $25-$45 HOURLY + UNION BENEFITS PACKAGE * REWARDING YOUR PERFORMANCE * Competitive salary, commensurate with experience Company paid vacation and holidays Company health care, vision, & dental benefits 401k plan with Company match Company paid life insurance Education and training provided with monetary incentives available for education courses completed Eligible for performance and company-based bonuses PDM Group is an Equal Opportunity Employer with a strong commitment to the achievement of excellence and diversity among its workforce. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, protected veteran status, or any other characteristic protected by law.