Trabajos air quality en Rochester, New YorkCrear alertas

L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers’ mission and quest for professional growth. L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do. L3Harris is the Trusted Disruptor in defense tech. With customers’ mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security. Job Title: Senior Specialist, Electrical Engineer-RF Job Code: 36749 Job Location: Rochester, NY Job Schedule: 5/8: Employees work 8 hours per day, 5 days a week Job Description: The successful candidate will join a team of dedicated professionals who are responsible for supporting military communication products from pre-release to obsolescence. As a member of the Product Support Engineering team you will be tasked with investigating a variety of problems including RF/Analog, digital, assembly, SMT and test related. You will collaborate across multifunctional teams to diagnose problems to component level, determining solutions via simulation and experimentation and implementing corrective actions. As new products are launched you will interface with design engineering, assisting with root cause analysis, troubleshooting of prototypes and ensuring a successful launch into full rate production. Typical tasks include: • Mitigating component shortages through qualifying alternatives or redesigning circuits and sub-assemblies., • Determining design, process, and test improvements to increase test yields and product quality., • Working in cross-functional teams to meet manufacturability, testability and other DFx requirements for volume production., • Working with design engineering and manufacturing teams to introduce new designs into manufacturing., • Working with design engineering to make necessary circuit changes prior to and during the launch of new products., • Working to mitigate component obsolescence throughout the product lifecycle., • Provide guidance to junior staff. Assisting them as they investigate problems. Leading investigations and coordinating tasks., • Working with vendors, Quality and Supply Chain to address material discrepancies., • Troubleshooting unit, modules, and boards to the component level. Essential Functions: • Hardware troubleshooting ability including analog and RF components and circuits., • Ability to work independently with general supervision., • Ability to design and conduct engineering experiments and act upon test results., • Design and analysis of circuits and components utilizing ADS, Matlab and various design and simulation tools., • Experienced in leading small technical design or troubleshoot team, providing direction and prioritizing tasks to meet target yields and shipments., • Generate and deliver presentations for various levels of management regarding issues, investigations, improvements or cost savings in a concise manner., • Ability to work in a fast-paced environment interfacing with multiple teams across the organization., • Ability to use typical lab equipment: Oscilloscope, DMM, Spectrum & Network analyzers, and signal generators., • Must be a quick learner, able to problem solve and be self-motivated., • Able to analyze designs and communicate technical information to support staff., • Ability to Obtain a US Security Clearance Qualifications: • Bachelor’s Degree and minimum 6 years of prior relevant experience. Graduate Degree and a minimum of 4 years of prior related experience. In lieu of a degree, minimum of 10 years of prior related experience in RF., • 4+ years of RF experience. Preferred Additional Skills: • Electrical engineering degree., • Experience with tactical Radio and Power Amplifier HW., • Experience troubleshooting to component level., • Working knowledge of LabVIEW, ADS and Jira., • Experience with MS Office including advanced spreadsheet manipulation and presentation creation., • Excellent communication and interpersonal skills with all levels of organization & supplier base. In compliance with pay transparency requirements, the salary range for this role in New York State is $90,500 - $168,500. This is not a guarantee of compensation or salary, as final offer amount may vary based on factors including but not limited to experience and geographic location. L3Harris also offers a variety of benefits, including health and disability insurance, 401(k) match, flexible spending accounts, EAP, education assistance, parental leave, paid time off, and company-paid holidays. The specific programs and options available to an employee may vary depending on date of hire, schedule type, and the applicability of collective bargaining agreements. #LI-MA1 L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law. Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information. By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions. L3Harris Technologies is an E-Verify Employer. Please click here for the E-Verify Poster in or . For information regarding your Right To Work, please click here for or .

L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers’ mission and quest for professional growth. L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do. L3Harris is the Trusted Disruptor in defense tech. With customers’ mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security. Job Title: Senior Specialist, Electrical Engineer Job Code: 36888 Job Location: Rochester, NY Job Schedule: 5/8: Employees work 8 hours per day, 5 days a week Job Description: The successful candidate will join a team of dedicated professionals who are responsible for supporting military communication products throughout their lifecycle. As a Product Support Engineer you will be tasked with investigating a variety of problems related to Analog, Digital, and RF. Candidates with experience in any of these areas will be considered. Working from our lab adjacent to manufacturing you will collaborate across multifunctional teams to diagnose problems to component level, determine solutions via experimentation and simulation and implement corrective actions. As an extension of design engineering, you will have the opportunity to learn and grow while providing electrical engineering support to technicians and junior engineers. As new products are launched you will interface across engineering, assisting with root cause analysis, troubleshooting of prototypes and ensuring a successful launch into full-rate production. Typical tasks include: • Monitoring daily factory yields, investigating failures, and determining corrective actions., • Mitigating component shortages through selecting and qualifying alternatives or redesigning circuits and sub-assemblies., • Determining design, process, and test improvements to increase test yields and product quality., • Working as part of a cross-functional team to meet manufacturability, testability and other DFx requirements for volume production., • Working with other engineering teams to make necessary circuit changes prior to and during the launch of new products., • Working to mitigate component obsolescence throughout the product lifecycle., • Provide guidance to junior staff by providing assistance as they investigate problems., • Lead investigations, coordinate tasks, and direct junior staff as required., • Work with Quality and Supply Chain to address material discrepancies., • Troubleshooting unit, modules, and boards to the component level., • Support digital and related analog hardware designs., • Perform detailed analysis of analog, digital and/or RF circuitry. Essential Functions: • Hardware troubleshooting ability to component level for analog and digital circuits., • Ability to work independently and within a team setting., • Ability to design and conduct engineering experiments and act upon test results., • Design and analysis of circuits and components utilizing various simulation tools., • Experienced in leading small technical design or troubleshooting team, providing direction and prioritizing tasks to meet target yields and shipments., • Ability to work in a fast-paced environment interfacing with multiple teams across the organization., • Ability to use typical lab equipment: Oscilloscope, DMM, Spectrum & Network analyzers, logic analyzers and signal generators., • A driven person that wants to learn and is a proven problem solver., • Able to analyze designs and communicate technical information to support staff., • Ability to obtain a US Security Clearance. Qualifications: • Bachelor’s EE Degree and minimum 6 years of prior relevant experience. Graduate Degree and a minimum of 4 years of prior related experience. In lieu of a degree, minimum of 10 years of prior related experience in Electrical Engineering. Preferred Additional Skills: • Experience with tactical radios is a plus., • Experience reading schematics and datasheets, probing circuits and understanding proper circuit operation., • Troubleshoot circuit assemblies to component level, • Ability to select alternate electronic components and know what testing is required to qualify them., • Working knowledge of LabVIEW and Jira a plus., • Experience in a manufacturing environment is a plus. In compliance with pay transparency requirements, the salary range for this role in New York State is $90,500 - $168,500. This is not a guarantee of compensation or salary, as final offer amount may vary based on factors including but not limited to experience and geographic location. L3Harris also offers a variety of benefits, including health and disability insurance, 401(k) match, flexible spending accounts, EAP, education assistance, parental leave, paid time off, and company-paid holidays. The specific programs and options available to an employee may vary depending on date of hire, schedule type, and the applicability of collective bargaining agreements. #LI-MA1 L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law. Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information. By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions. L3Harris Technologies is an E-Verify Employer. Please click here for the E-Verify Poster in or . For information regarding your Right To Work, please click here for or .

L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers’ mission and quest for professional growth. L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do. L3Harris is the Trusted Disruptor in defense tech. With customers’ mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security. Job Title: Quality Engineering Technician Job Code: 35858 Job Location: Rochester, New York Job Schedule: 1st Shift - 5/8 or 9/80 (Monday-Friday) Job Description: • Support Quality initiatives including improvements; incident investigations; RC/CA determinations., • Support/initiate containment activities for FF quality spills into Finished Goods and Shipping including purges, sorting and rework., • Support part removal or part swapping in completed (packed) orders awaiting shipment., • Investigate material shortages, mixed stock and/or wrong parts issued from the Stockroom., • Support Customer FAT activities real-time for Programs including investigating, repairing and/or replacing defective material as required; working with FF QE’s to have FAT material re-tested as necessary; providing BOM reviews and serialization assigned; reviewing rev history of assigned components; etc., • Support customer escape reduction initiatives., • Create inspection plans and notes; update existing procedures., • Support teamwork and collaboration efforts within the Quality Team., • Manage work priorities based on work queue and incidental work requests. Qualifications: • Requires a High School Diploma or equivalent and a minimum of 4 years of prior relevant experience or 2 years post-Secondary/Associates Degree with 0 to 2 years of prior related experience Preferred Additional Skills: • Willingness to work and learn in a fast-paced production environment., • Proficient computer skills, including MS Office., • Effective oral and written communication skills., • Self-starter; Ability to work independently or in a team environment., • Exposure to Lean Manufacturing Principles.Familiarity with Agile and Oracle. In compliance with pay transparency requirements, the salary range for this role in New York state is $19.95 - $36.78. This is not a guarantee of compensation or salary, as final offer amount may vary based on factors including but not limited to experience and geographic location. L3Harris also offers a variety of benefits, including health and disability insurance, 401(k) match, flexible spending accounts, EAP, education assistance, parental leave, paid time off, and company-paid holidays. The specific programs and options available to an employee may vary depending on date of hire, schedule type, and the applicability of collective bargaining agreements. L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law. Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information. By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions. L3Harris Technologies is an E-Verify Employer. Please click here for the E-Verify Poster in or . For information regarding your Right To Work, please click here for or .

Position Description Torque by Ryder is Immediately hiring a Permanent Full Time Experienced Mobile Diesel Technician to support our Truck Fleet in Rochester, NY Hear it from a Torque Mobile Mechanic Technician Here: https://RyderCareers.Video/TorqueMMT • Technician Positions Pay Each Week, • Hourly Pay: $43.00 per hour based on experience, • Retention Bonus: $2000 paid every quarter within the first year., • Schedule: Flexible 40-hour work week (weekend premiums apply), • Fuel Card and Company Cell Phone provided, • For mobile technicians, work site service vehicle will be provided, • Grow with Ryder: This position provides additional training to level up. We want the right Maintenance Repair Mechanic Technician to join us at Ryder to manage our fleet of Heavy Duty Trucks. Spots are filling fast — click apply now to secure your spot. Questions? Call Jordon or text “Rochester” to 904-869-3454 to speak with your recruiter today. All the benefits you expect — without the wait. • Medical, Dental, Vision after 30 days, • 80 hours PTO your first year, starting Day 1, • Yearly merit pay increases, • 401 (k) company match, • PPE, uniforms, and boot allowance, • Build your skills - paid training, • Safety‑first workplace & State-of-the-art equipment, • Top Tech Competition: Earn $250 – $50,000 per year, • U.S. military veterans - extra paid day off, • 15% company stock discount, • Up to $5,000 in Tech tuition repayment, • 12 weeks paid maternity leave (subject to specific eligibility criteria, including work tenure), • Employee discounts on tools, vehicles, travel, tech & more Apply today and see why a job with Ryder is what you’ve been looking for. Call us or go online to apply to one of our career opportunities Click Here to See All Ryder Careers:https://www.ryder.com/careers/diesel-technicians EEO/AA/Female/Minority/Disabled/Veteran Requirements • High school diploma or equivalent preferred, • Vocational or Technical Certification Post Secondary degree or Technical Certifications, preferred, • Basic tools, required, • Requires demonstrated aptitude and applied experience in mechanical repair of automotive gas or diesel engines including:, • Routine preventative maintenance, which should include oil changes, brake and tire work, • Diagnostics and repairs, including AC, electrical systems, • Advanced skilled level repairs to include some major engine repairs, diesel after treatment or automotive fuel injection repairs, • Four (4) years or more Relevant work experience, preferred, • NonCommercial Driver License CLASS E, preferred, • Valid Commercial Driver License (CDL) CLASS A, preferred, • Other State driver's license, as required, • Four (4) years or more experience with mechanical repairs and diagnostics on heavy duty and medium duty equipment, • Must have minimum tools required to perform their job duties as outlined in Ryder's Maintenance policy 2.02, • Able to take home assigned mobile service truck, as applicable, and secure vehicle and contents, • Must be able to drive Ryder vehicles, • Ability to:, • Understand and adhere to Company policies in all areas, • Complete repair orders with the Company established systems, • Create and maintain professional relationships within all levels of the organization (peers, work groups, customers, supervisors), • Work independently and as a member of a team, • Prioritize workload, • Proven hands-on mechanic, customer service, and account management skills, • Demonstrates customer service skills, • Strong verbal and written communication skills, • Flexibility to operate and self-driven to excel in a fast-paced environment, • Self-starter and self-sufficient approach, • Capable of multi-tasking, highly organized, with excellent time management skills, • Detailed oriented with excellent follow-up practices, • Entrepreneurial spirit, • Preventive Maintenance (PM230&PM298) within 90 Days, • Brakes-Air (BA220&BA298) within 90 Days, • Brake mechanics/inspectors FMCS 396.25, • Hydraulic Brake (BH220&BH298) where appropriate within 90 Days, • Tire & Wheel TW220 within 90 Days, • CF609 & A/C trained and qualified (AC220&AC298) within 180 Days, • HD electrical - DR208 within 90 Days, • Svc Island Support SBTIII trained (SBT220) and SBT Phase 2 within 180 Days, • Complete 2 of the OEM On-Line diagnostic tool software courses as required by location fleet mi. (predominant OEM of fleet mix), • This position requires for you to drive Ryder vehicles. In order to become a Ryder employee you must:, • Pass a Ryder Drug Test, • Pass a DOT physical, • Pass a Ryder road test, • Pass a Ryder Background and Motor vehicle check including Drug and alcohol verification from previous employers for the last 3 years Important Note: Some positions require additional screening that may include employment and education verification; motor vehicle records check and a road test; and/or badging or background requirements of the customer to which you are assigned. Responsibilities • Decision making: Responsible for making decisions surrounding vehicle diagnostics and repair, • Performs vehicle maintenance and repair duties including: standard vehicle maintenance, preventive maintenance, complex repairs with minimal (if any) support, • Demonstrate the ability to access and use internal and external maintenance documents - Diagnoses and repairs complex mechanical and electronic problems with minimal (if any) support, utilizing diagnostic computers/software when applicable, • Performs remote triage to with RCRC and customers to determine best solution to assist roadside breakdowns, • Performs facility maintenance duties, • Interacts with customers/drivers to properly determine nature of complaint once assigned a task, • Instructs and advises other technicians regarding maintenance repair procedures and diagnostics, • Interact with non-contractual customers, exhibit account management skills to independently facilitate preventative maintenance, repair issue resolution, and discuss new repair estimates with customer. Coordinate work schedule as required by customers. Road test vehicles to identify cause of complaints for repairs, ensure quality of repair work performed, and deliver customer satisfaction., • Preventive maintenance (PM) and vehicle repairs responsibilities include but is not limited to:, • A/C & Heater: Operate the system and recognize if the system is cooling or not (PM related); Perform system checks such as power to compressor, visual inspection of condenser, belt tension, etc; Identify Freon and oil leaks, • Brakes-Air: Identify components of air brake system; Operate brakes and identify irregular noises, air leaks; Perform simple air system tests; Measure lining thickness; Adjust brakes; Perform air brake sections of P.M.; Measure drums, rotors, cam bushings Perform brake repairs per (BA298) once trained and qualified, • Brakes-Hydraulic: Road test for proper operation; Make visual inspections for leaks; Check park brake operation; Check fluid level; Measure lining thickness; Adjust service brakes; Perform brake repairs per (BH298) once trained and qualified; Adjust park brakes, • Cargo Handling/Transfer, Liftgates: Identify leaks; Operate lift gate; Identify make and model; Add fluid to bring to proper level; Make minor adjustments to lift platform and its controls; Identify basic malfunctions, • Charging Systems (electrical): Visually inspect batteries; Clean connections; Check condition of belts; Test batteries; Check alternator mounting and pulley; Replace and adjust belts; Perform basic charging system check, • Clutch: Lubricate throw-out bearing, linkage, shafts, and cables; Identify proper clutch operation; Identify proper clutch brake operation, • Cooling Systems: Check and adjust coolant levels; Visually inspect system for leaks; Make minor repairs such as hose replacements, fan shrouds, leaking fittings; Recognize permanent antifreezes and their requirements; Use refractometer; Use pressure tester; Flush and refill systems, • Cranking System (electrical): Inspect and test batteries; Visually inspect cables and cranking motor; Clean the battery cables, connections and starter; Replace batteries; Charge and check batteries; Replace or repair defective cables, • Lighting System and Electrical Accessories: Repair minor wiring problems; Replace bulbs, lenses and simple light assemblies; Repair minor lighting problems; Replace and adjust sealed beams; Install or replace accessories such as heated mirrors, fans, spotlights, • Drive Axles: Inspect housings for leaks; Change oil and filter, if required, and clean breathers, • Driveline: Lubricate drive line; Inspect components for wear or damage, • Gas Engines-All Engines: Check and adjust oil levels; Identify unusual noises, and oil leaks, • Fuel Systems: Replace and prime fuel filter; Check gas and diesel fuel system components such as fuel lines, pickup tubes, return lines, etc, for proper integrity and condition, • Preventive Maintenance: Proper lube techniques; Minimal tire inspection; Brake check/applied stroke; Battery check; Under vehicle check/loose components; Initial Fault code identification; All PMs (PM298) including C supplements to exclude overheads, engine brake overhauls, DPF servicing, clean doser injector, servicing ArvinMeritor unitized hubs, inspect Lece Neville alternator brushes, inspect modulator system for proper operation, inspect/adjust shift selector cable, pop test Isuzu injectors, • Steering and Non-driven Axles and Alignment: Lubricate grease fittings, check and adjust fluid levels; Check and adjust toe; Check all steering components for wear; Check and adjust trailer axle alignment; Adjust wheel bearings including replacement of wheel seal, • Suspension-Chassis and Cab: Identify makes and models; Identify normal operation; Identify and repair minor air leaks; Identify malfunctions of basic nature, broken springs, excessive wear on bushings, etc, • Tire and Wheel Maintenance: Perform air pressure checks; Check tread depth; Identify tires that need to be changed or repaired; Perform tire P.M. checks; Replace tire and wheel assemblies; Mount/dismount and rotate tires; Perform tire/wheel checks/repairs per (TW298), • Vehicle Coupling System (PM): Lubricate fifth wheel plate and slider mechanism; Operate slider mechanism, • Utilize key functions of Shop Management System and electronic documentation available. Perform work in accordance with all federal/provincial and corporate compliance guidelines (i.e. safety, DOT). Use internal and external maintenance documents, • Performs other duties as assigned., • Ensure proper maintenance of all service, safety and environmental records required to meet and/or exceed corporate, federal, state, and local government mandated requirements., • Accountable for key maintenance measurements established by company policy, related to the inspection and performance of PMs, brakes, tires, wheels, including any maintenance items directly associated with the safety of the customer. Ryder is proud to be an Equal Opportunity Employer and Drug Free workplace. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, sexual orientation, gender identity, age, status as a protected veteran, among other things, or status as a qualified individual with disability. Posted Date 1 week ago (5/22/2026 9:16 AM) Requisition ID 2026-202411 Location (Posting Location) : State/Province NY Location (Posting Location) : City ROCHESTER Location (Posting Location) : Postal Code 14606 Category Technicians/Service Employees9 Employment Type Regular-Full time Travel Requirements Greater than 60% Position Code 1001374 Min Pay USD $43.00/Hr. Max Pay USD $43.00/Hr.

Position Description Torque by Ryder is Immediately hiring a Permanent Full Time Master Level Mobile Diesel Technician to support our Truck Fleet in Rochester, NY Call or text “Rochester” to Jordon @ 904-869-3454 for more details Hear it from a Torque Mobile Mechanic Technician Here: https://RyderCareers.Video/TorqueMMT • Technician Positions Pay Each Week, • Hourly Pay: $41.00 per hour, • Schedule: Monday - Friday, • Hours: First Shift 7:00 am – 4:00pm, • Fuel Card and Company Cell Phone provided, • For mobile technicians, work site service vehicle will be provided, • Bonus eligible based on performance., • Grow with Ryder: This position provides additional training to level up. Apply Here with Ryder Today Spots are filling fast — apply now to secure your spot. Call or text “Rochester” to Jordon @ 904-869-3454 for more details We want the right Maintenance Repair Mechanic Technician to join us at Ryder manage our fleet of Heavy Duty Trucks. At Ryder, we offer outstanding benefits: • Generous Paid Time Off, • Medical, Dental and Vision Insurance effective 30 days from hire date, • Life Insurance and Disability Insurance Options, • 401K Savings Plan with Ryder matching contributions, • Discount on purchase of Ryder Common Stock, • Employee Discounts on Automotive, Mobile plans, Travel and Hotels, • Accredited Tech School Tuition Reimbursement, • PPE & Uniforms provided at no cost, • Paid Job training and development, • Employee & Customer Referral Bonus program Apply today and see why a job with Ryder is what you’ve been looking for. Call us or go online to apply to one of our career opportunities Click Here to See All Ryder Careers:https://www.ryder.com/careers/diesel-technicians EEO/AA/Female/Minority/Disabled/Veteran Requirements • High school diploma or equivalent preferred, • Vocational or Technical Certification Post Secondary degree or Technical Certifications, preferred, • Basic tools required, • Requires demonstrated aptitude and applied experience in mechanical repair of automotive gas or diesel engines including:, • Routine preventative maintenance, which should include oil changes, brake and tire work, • Diagnostics and repairs, including AC, electrical systems, • Advanced skilled level repairs to include some major engine repairs, diesel after treatment or automotive fuel injection repairs, • Three (3) years or more relevant work experience, preferred, • NonCommercial Driver License CLASS E, preferred, • Valid Commercial Driver License (CDL) CLASS A, preferred, • Other State driver's license, as required, • Two (2) years or more experience with mechanical repairs and diagnostics on heavy duty and medium duty equipment, • Must be able to drive Ryder vehicles, • Ability to:, • Understand and adhere to Company policies in all areas, • Complete repair orders with the Company established systems, • Create and maintain professional relationships within all levels of the organization (peers, work groups, customers, supervisors), • Work independently and as a member of a team, • Prioritize workload, • Proven hands-on mechanic, customer service, and account management skills, • Demonstrates customer service skills, • Strong relationship management skills, • Strong verbal and written communication skills, • Flexibility to operate and self-driven to excel in a fast-paced environment, • Self-starter and self-sufficient approach, • Capable of multi-tasking, highly organized, with excellent time management skills, • Detailed oriented with excellent follow-up practices, • Entrepreneurial spirit, • Preventive Maintenance (PM230&PM298) within 90 Days, • Brakes-Air (BA220&BA298) within 90 Days, • Brake mechanics/inspectors FMCS 396.25, • Hydraulic Brake (BH220&BH298) where appropriate within 90 Days, • Tire & Wheel TW220 within 90 Days, • CF609 & A/C trained and qualified (AC220&AC298) within 180 Days, • HD electrical - DR208 within 90 Days, • Svc Island Support SBTIII trained (SBT220) and SBT Phase 2 within 180 Days, • Complete 2 of the OEM On-Line diagnostic tool software courses as required by location fleet mi. (predominant OEM of fleet mix), • This position requires for you to drive Ryder vehicles. In order to become a Ryder employee you must:, • Pass a Ryder Drug Test, • Pass a DOT physical, • Pass a Ryder road test, • Pass a Ryder Background and Motor vehicle check including Drug and alcohol verification from previous employers for the last 3 years Important Note: Some positions require additional screening that may include employment and education verification; motor vehicle records check and a road test; and/or badging or background requirements of the customer to which you are assigned. Responsibilities • Interact with customer, exhibit account management skills to independently facilitate preventative maintenance, repair issue resolution, and discuss new repair estimates with customer., • Coordinate work schedule as required by customers. Road test vehicles to identify cause of complaints for repairs, ensure quality of repair work performed, and deliver customer satisfaction., • Preventive maintenance (PM) and vehicle repairs responsibilities include but is not limited to:, • A/C & Heater: Operate the system and recognize if the system is cooling or not (PM related); Perform system checks such as power to compressor, visual inspection of condenser, belt tension, etc; Identify Freon and oil leaks, • Brakes-Air: Identify components of air brake system; Operate brakes and identify irregular noises, air leaks; Perform simple air system tests; Measure lining thickness; Adjust brakes; Perform air brake sections of P.M.; Measure drums, rotors, cam bushings Perform brake repairs per (BA298) once trained and qualified, • Brakes-Hydraulic: Road test for proper operation; Make visual inspections for leaks; Check park brake operation; Check fluid level; Measure lining thickness; Adjust service brakes; Perform brake repairs per (BH298) once trained and qualified; Adjust park brakes, • Cargo Handling/Transfer, Liftgates: Identify leaks; Operate lift gate; Identify make and model; Add fluid to bring to proper level; Make minor adjustments to lift platform and its controls; Identify basic malfunctions, • Charging Systems (electrical): Visually inspect batteries; Clean connections; Check condition of belts; Test batteries; Check alternator mounting and pulley; Replace and adjust belts; Perform basic charging system check, • Clutch: Lubricate throw-out bearing, linkage, shafts, and cables; Identify proper clutch operation; Identify proper clutch brake operation, • Cooling Systems: Check and adjust coolant levels; Visually inspect system for leaks; Make minor repairs such as hose replacements, fan shrouds, leaking fittings; Recognize permanent antifreezes and their requirements; Use refractometer; Use pressure tester; Flush and refill systems, • Cranking System (electrical): Inspect and test batteries; Visually inspect cables and cranking motor; Clean the battery cables, connections and starter; Replace batteries; Charge and check batteries; Replace or repair defective cables, • Lighting System and Electrical Accessories: Repair minor wiring problems; Replace bulbs, lenses and simple light assemblies; Repair minor lighting problems; Replace and adjust sealed beams; Install or replace accessories such as heated mirrors, fans, spotlights, • Drive Axles: Inspect housings for leaks; Change oil and filter, if required, and clean breathers, • Driveline: Lubricate drive line; Inspect components for wear or damage, • Gas Engines-All Engines: Check and adjust oil levels; Identify unusual noises, and oil leaks, • Fuel Systems: Replace and prime fuel filter; Check gas and diesel fuel system components such as fuel lines, pickup tubes, return lines, etc, for proper integrity and condition, • Preventive Maintenance: Proper lube techniques; Minimal tire inspection; Brake check/applied stroke; Battery check; Under vehicle check/loose components; Initial Fault code identification; All PMs (PM298) including C supplements to exclude overheads, engine brake overhauls, DPF servicing, clean doser injector, servicing ArvinMeritor unitized hubs, inspect Lece Neville alternator brushes, inspect modulator system for proper operation, inspect/adjust shift selector cable, pop test Isuzu injectors, • Steering and Non-driven Axles and Alignment: Lubricate grease fittings, check and adjust fluid levels; Check and adjust toe; Check all steering components for wear; Check and adjust trailer axle alignment; Adjust wheel bearings including replacement of wheel seal, • Suspension-Chassis and Cab: Identify makes and models; Identify normal operation; Identify and repair minor air leaks; Identify malfunctions of basic nature, broken springs, excessive wear on bushings, etc, • Tire and Wheel Maintenance: Perform air pressure checks; Check tread depth; Identify tires that need to be changed or repaired; Perform tire P.M. checks; Replace tire and wheel assemblies; Mount/dismount and rotate tires; Perform tire/wheel checks/repairs per (TW298), • Vehicle Coupling System (PM): Lubricate fifth wheel plate and slider mechanism; Operate slider mechanism, • Utilize key functions of Shop Management System and electronic documentation available. Perform work in accordance with all federal/provincial and corporate compliance guidelines (i.e. safety, DOT). Use internal and external maintenance documents, • Performs other duties as assigned., • Ensure proper maintenance of all service, safety and environmental records required to meet and/or exceed corporate, federal, state, and local government mandated requirements., • Accountable for key maintenance measurements established by company policy, related to the inspection and performance of PMs, brakes, tires, wheels, including any maintenance items directly associated with the safety of the customer., • Act as a mentor for the SM II level. Ryder is proud to be an Equal Opportunity Employer and Drug Free workplace. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, sexual orientation, gender identity, age, status as a protected veteran, among other things, or status as a qualified individual with disability. Posted Date 1 month ago (4/28/2026 4:48 PM) Requisition ID 2026-200656 Location (Posting Location) : State/Province NY Location (Posting Location) : City ROCHESTER Location (Posting Location) : Postal Code 14606 Category Technicians/Service Employees9 Employment Type Regular-Full time Travel Requirements Greater than 60% Position Code 1001311 Min Pay USD $38.00/Hr. Max Pay USD $38.00/Hr.

Position Description Torque by Ryder is immediately hiring a Permanent Full-Time Master Level Mobile Diesel Technician to support our Truck Fleet in Rochester, NY Hear it from a Torque Mobile Mechanic Technician Here: https://RyderCareers.Video/TorqueMMT • Technician Positions Pay Each Week, • Hourly Pay: $41.00 per hour, • Schedule: Monday - Friday, • Hours: First Shift 7:00 am – 4:00 pm, • Fuel Card and Company Cell Phone provided, • For mobile technicians, work site service vehicle will be provided, • Bonus is eligible based on performance., • Grow with Ryder: This position provides additional training to level up. Apply Here with Ryder Today Spots are filling fast — click apply now to secure your spot. Questions? Call Jordon or text Rochester to 904-869-3454 to speak with your recruiter today. We want the right Maintenance Repair Mechanic Technician to join us at Ryder to manage our fleet of Heavy Duty Trucks. At Ryder, we offer outstanding benefits: • Generous Paid Time Off, • Medical, Dental and Vision Insurance effective 30 days from hire date, • Life Insurance and Disability Insurance Options, • 401K Savings Plan with Ryder matching contributions, • Discount on purchase of Ryder Common Stock, • Employee Discounts on Automotive, Mobile plans, Travel and Hotels, • Accredited Tech School Tuition Reimbursement, • PPE & Uniforms provided at no cost, • Paid Job training and development, • Employee & Customer Referral Bonus program Apply today and see why a job with Ryder is what you’ve been looking for. Call us or go online to apply to one of our career opportunities Click Here to See All Ryder Careers:https://www.ryder.com/careers/diesel-technicians EEO/AA/Female/Minority/Disabled/Veteran Requirements • High school diploma or equivalent preferred, • Vocational or Technical Certification Post Secondary degree or Technical Certifications, preferred, • Basic tools required, • Requires demonstrated aptitude and applied experience in mechanical repair of automotive gas or diesel engines including:, • Routine preventative maintenance, which should include oil changes, brake and tire work, • Diagnostics and repairs, including AC, electrical systems, • Advanced skilled level repairs to include some major engine repairs, diesel after treatment or automotive fuel injection repairs, • Three (3) years or more relevant work experience, preferred, • NonCommercial Driver License CLASS E, preferred, • Valid Commercial Driver License (CDL) CLASS A, preferred, • Other State driver's license, as required, • Two (2) years or more experience with mechanical repairs and diagnostics on heavy duty and medium duty equipment, • Must be able to drive Ryder vehicles, • Ability to:, • Understand and adhere to Company policies in all areas, • Complete repair orders with the Company established systems, • Create and maintain professional relationships within all levels of the organization (peers, work groups, customers, supervisors), • Work independently and as a member of a team, • Prioritize workload, • Proven hands-on mechanic, customer service, and account management skills, • Demonstrates customer service skills, • Strong relationship management skills, • Strong verbal and written communication skills, • Flexibility to operate and self-driven to excel in a fast-paced environment, • Self-starter and self-sufficient approach, • Capable of multi-tasking, highly organized, with excellent time management skills, • Detailed oriented with excellent follow-up practices, • Entrepreneurial spirit, • Preventive Maintenance (PM230&PM298) within 90 Days, • Brakes-Air (BA220&BA298) within 90 Days, • Brake mechanics/inspectors FMCS 396.25, • Hydraulic Brake (BH220&BH298) where appropriate within 90 Days, • Tire & Wheel TW220 within 90 Days, • CF609 & A/C trained and qualified (AC220&AC298) within 180 Days, • HD electrical - DR208 within 90 Days, • Svc Island Support SBTIII trained (SBT220) and SBT Phase 2 within 180 Days, • Complete 2 of the OEM On-Line diagnostic tool software courses as required by location fleet mi. (predominant OEM of fleet mix), • This position requires for you to drive Ryder vehicles. In order to become a Ryder employee you must:, • Pass a Ryder Drug Test, • Pass a DOT physical, • Pass a Ryder road test, • Pass a Ryder Background and Motor vehicle check including Drug and alcohol verification from previous employers for the last 3 years Important Note: Some positions require additional screening that may include employment and education verification; motor vehicle records check and a road test; and/or badging or background requirements of the customer to which you are assigned. Responsibilities • Interact with customer, exhibit account management skills to independently facilitate preventative maintenance, repair issue resolution, and discuss new repair estimates with customer., • Coordinate work schedule as required by customers. Road test vehicles to identify cause of complaints for repairs, ensure quality of repair work performed, and deliver customer satisfaction., • Preventive maintenance (PM) and vehicle repairs responsibilities include but is not limited to:, • A/C & Heater: Operate the system and recognize if the system is cooling or not (PM related); Perform system checks such as power to compressor, visual inspection of condenser, belt tension, etc; Identify Freon and oil leaks, • Brakes-Air: Identify components of air brake system; Operate brakes and identify irregular noises, air leaks; Perform simple air system tests; Measure lining thickness; Adjust brakes; Perform air brake sections of P.M.; Measure drums, rotors, cam bushings Perform brake repairs per (BA298) once trained and qualified, • Brakes-Hydraulic: Road test for proper operation; Make visual inspections for leaks; Check park brake operation; Check fluid level; Measure lining thickness; Adjust service brakes; Perform brake repairs per (BH298) once trained and qualified; Adjust park brakes, • Cargo Handling/Transfer, Liftgates: Identify leaks; Operate lift gate; Identify make and model; Add fluid to bring to proper level; Make minor adjustments to lift platform and its controls; Identify basic malfunctions, • Charging Systems (electrical): Visually inspect batteries; Clean connections; Check condition of belts; Test batteries; Check alternator mounting and pulley; Replace and adjust belts; Perform basic charging system check, • Clutch: Lubricate throw-out bearing, linkage, shafts, and cables; Identify proper clutch operation; Identify proper clutch brake operation, • Cooling Systems: Check and adjust coolant levels; Visually inspect system for leaks; Make minor repairs such as hose replacements, fan shrouds, leaking fittings; Recognize permanent antifreezes and their requirements; Use refractometer; Use pressure tester; Flush and refill systems, • Cranking System (electrical): Inspect and test batteries; Visually inspect cables and cranking motor; Clean the battery cables, connections and starter; Replace batteries; Charge and check batteries; Replace or repair defective cables, • Lighting System and Electrical Accessories: Repair minor wiring problems; Replace bulbs, lenses and simple light assemblies; Repair minor lighting problems; Replace and adjust sealed beams; Install or replace accessories such as heated mirrors, fans, spotlights, • Drive Axles: Inspect housings for leaks; Change oil and filter, if required, and clean breathers, • Driveline: Lubricate drive line; Inspect components for wear or damage, • Gas Engines-All Engines: Check and adjust oil levels; Identify unusual noises, and oil leaks, • Fuel Systems: Replace and prime fuel filter; Check gas and diesel fuel system components such as fuel lines, pickup tubes, return lines, etc, for proper integrity and condition, • Preventive Maintenance: Proper lube techniques; Minimal tire inspection; Brake check/applied stroke; Battery check; Under vehicle check/loose components; Initial Fault code identification; All PMs (PM298) including C supplements to exclude overheads, engine brake overhauls, DPF servicing, clean doser injector, servicing ArvinMeritor unitized hubs, inspect Lece Neville alternator brushes, inspect modulator system for proper operation, inspect/adjust shift selector cable, pop test Isuzu injectors, • Steering and Non-driven Axles and Alignment: Lubricate grease fittings, check and adjust fluid levels; Check and adjust toe; Check all steering components for wear; Check and adjust trailer axle alignment; Adjust wheel bearings including replacement of wheel seal, • Suspension-Chassis and Cab: Identify makes and models; Identify normal operation; Identify and repair minor air leaks; Identify malfunctions of basic nature, broken springs, excessive wear on bushings, etc, • Tire and Wheel Maintenance: Perform air pressure checks; Check tread depth; Identify tires that need to be changed or repaired; Perform tire P.M. checks; Replace tire and wheel assemblies; Mount/dismount and rotate tires; Perform tire/wheel checks/repairs per (TW298), • Vehicle Coupling System (PM): Lubricate fifth wheel plate and slider mechanism; Operate slider mechanism, • Utilize key functions of Shop Management System and electronic documentation available. Perform work in accordance with all federal/provincial and corporate compliance guidelines (i.e. safety, DOT). Use internal and external maintenance documents, • Performs other duties as assigned., • Ensure proper maintenance of all service, safety and environmental records required to meet and/or exceed corporate, federal, state, and local government mandated requirements., • Accountable for key maintenance measurements established by company policy, related to the inspection and performance of PMs, brakes, tires, wheels, including any maintenance items directly associated with the safety of the customer., • Act as a mentor for the SM II level. Ryder is proud to be an Equal Opportunity Employer and Drug Free workplace. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, sexual orientation, gender identity, age, status as a protected veteran, among other things, or status as a qualified individual with disability. Posted Date 1 week ago (5/22/2026 9:09 AM) Requisition ID 2026-202409 Location (Posting Location) : State/Province NY Location (Posting Location) : City ROCHESTER Location (Posting Location) : Postal Code 14606 Category Technicians/Service Employees9 Employment Type Regular-Full time Travel Requirements Greater than 60% Position Code 1001311 Min Pay USD $38.00/Hr. Max Pay USD $38.00/Hr.

Job Description Job purpose To setup and run the Sodick Wire EDMs all the while maintaining part quality and production efficiencies. Duties and responsibilities • Setup, operate and debug Sodick Wire EDMs., • Make machine tool offsets as needed to maintain part quality., • Make minor program changes to M & G code as needed., • Identifies signs of tool wear and then makes the appropriate process or tool change(s)., • Reads process sheets and mechanical drawings with the understanding of GD&T., • Works on multiple machines and performs multiple tasks throughout the day., • Uses general measuring instruments such as; indicators, micrometers, calipers, optical comparators, gage blocks, rules, protractor and height gages., • Enters inspection data into a computer software program., • Performs basic machine maintenance such as changing fluids and filters., • Maintains a clean work environment and machine work area., • Follows company written policy and documented procedures., • Performs other duties as assigned. Qualifications • Minimum 3-5 years of experience setting up and running EDMs or minimum 3-5 years of experience setting up and running CNC Lathes and Mills or Technical Training College with the focus of study being CNC setups and operation., • Ability to read blue prints and knowledge of GD&T a must., • Knowledge of Esprit programs with understanding of cutting parameters., • An understanding of both the Metric and English measuring systems a must., • Ability to use a variety of measuring equipment., • High School Diploma or Technical Training Certificate. Working conditions • Standard work week is Monday through Friday on B-Shift., • Working in production environment., • Required exposure to industrial oils, coolants, solvents, lubricants, adhesive and other chemicals. NOTE: All safety precautions will be used., • Requirement for some independent actions and/or decisions is expected., • Required to work in a non-air-conditioned setting., • Some repetitive motion required on occasion. Physical requirements • Required daily: periodic lifting of materials and parts weighing up to 70 lbs., • Required intermittent long periods sitting and standing. Arnold Magnetic Technologies is an equal opportunity employer and does not discriminate on the basis of any legally protected status or characteristic. Minority/Female/Sexual Orientation/General Identity/Disability/Veteran #ROC B Shift: Mon-Thurs: 2:45pm-12:15am Fri: 2:45pm-6:45pm

Job Description Job purpose The primary responsibility for Machine Operator/Slicer is to attend machines while the machines slice parts. The operator is responsible for maximizing the quantity of parts while maintaining the quality of parts. Duties and responsibilities • Installs proper oils and coolants., • Adjusts machines accordingly for quality and quantity., • Removes swarfs and old coolants from machine and properly disposes of them., • Changes machine oils, coolant and filters., • Cleans machine and coolant tanks when necessary., • Maintains tooling to perform at maximum efficiency., • Maintains proper quality and quantities of manufactured materials., • Operate multiple slicing machines at a time., • Review Operation Sheet to assure all previous operations have been satisfactorily completed., • Setup and operate the equipment in a safe and productive manner., • Maintain part and identification during processing., • Verify completed operations match blue prints, • Other duties as assigned Qualifications • High School Diploma/GED, • Able to read blueprints, • GD&T Training & Understanding, • Able to use and understand standard and metric measuring systems., • Use of standard measuring tools., • Able to work individually and in a team environment., • Statistical Process Control (SPC) Experience beneficial. Working conditions • May be exposed to industrial oils, toner, coolants, solvents, lubricants, adhesive and other chemicals. NOTE: All safety precautions will be used., • Plant wide climate control and air conditioning, • Could work in areas with excessive noise. NOTE: Ear protection available. Physical requirements • Could require intermittent and long periods of sitting and/or standing., • Required to do repetitive work., • Periodic lifting of materials not to exceed 50 pounds. Arnold Magnetic Technologies is an equal opportunity employer and does not discriminate on the basis of any legally protected status or characteristic. Minority/Female/Sexual Orientation/General Identity/Disability/Veteran #ROC A Shift: Mon-Thurs: 5:30am-3:00pm Fri: 5:30am-9:30am

Job DescriptionSalary: $70k - $95k About Brothers International Food Holdings, LLC: Brothers International brings the world's best fruit to its customers. Our Ingredients divisions supply every major food and beverage manufacturer in North America with the fruits from the best growing regions of the world. Our CPG division sells market-leading branded and private label freeze-dried fruits to retailers nationwide. We are seeking a full-time Operations Manager to join our talented team in our Rochester, NY headquarters! Position Summary: The Operations Manager will provide dynamic leadership for all activities related to contract manufacturing, materials management, demand planning, transportation, warehousing, distribution, new product development, research & development, and compliance of Brothers International Food Holdings, LLC Consumer Packaged Goods division. This role is responsible for driving operational excellence across the division, ensuring seamless project management from concept to commercialization, and providing robust support to the operations and sales teams. Essential Functions: Leadership & Management: • Lead and mentor a high-performing team, working cross-functionally across operations, R&D, and sales support to foster professional growth, accountability, and a collaborative environment., • Establish and manage team goals and KPIs that align with the company objectives, regularly conduct performance reviews, and provide constructive feedback to ensure continuous improvement., • Drive a culture of operational excellence by empowering team members to identify process efficiencies, solve problems, and take ownership of their work., • Manage cross-functional challenges and resolve operational bottlenecks to maintain project timelines., • Serve as the primary liaison and accountability manager for our manufacturing contractors., • Direct the end-to-end management of outsourced production contracts. Strategic Planning & Continuous Improvement: • Establish Key Performance Indicators (KPIs) and drive continuous improvement initiatives for the Brothers International CPG Operations team., • Explore ways to streamline existing operational procedures and implement changes that will positively impact the company. R&D/ New Product Development (NPD) Management: • Oversee the NPD process from a project management perspective, including concept evaluation, business analysis, and commercialization., • Coordinate efforts between R&D, sales, marketing, and operations to ensure new products meet market demands and are feasible for production and distribution., • Manage project timelines, budget, and resources for all new product initiatives., • Oversee new product introductions and new customer onboarding activities. Supply Chain and Logistics Management: • Responsible for demand planning and forecasting all retail finished goods., • Determine raw material requirements and lead all procurement activities., • Manage all third-party manufacturing activities, including pricing, quality, yield/scrap, and schedule adherence., • Ensure coordination with the Shared Logistics Services team regarding the international and domestic movement of products via air, ocean, multimodal, and over-the-road transportation., • Establish Key Performance Indicators (KPIs) and lead quarterly business reviews with all key trading partners., • Work with the Shared Logistics Services team to ensure optimal transportation routings and timely customs clearance. Sales Support and Customer Service: • Provide the sales team with domestic order placement, fulfillment, and management of inventory levels at third-party warehouse locations., • Ensure high-level customer service to customers., • Oversee sales support individual(s0, acting as the primary point of contact for sales-related operational inquiries, working to resolve issues, and improve order-to-delivery cycles., • Liaise with suppliers, customers, and third-party providers to build and maintain strong working relationships across the supply chain. Minimum Qualifications: • Bachelors Degree in Business Administration, Supply Chain, Operations or related field., • MBA a plus, • PMP a plus, • 5-10 years of management experience focused in operations, supply chain, distribution, etc., • Proven experience in managing R&D and New Product Development processes from a project management perspective. Knowledge, Skills, & Abilities: • Ability to lead a high-performing cross-functional team, driving results., • Demonstrated success in driving efficiency via continuous improvement activities., • Experience managing company-operated warehouse operations, multi-site distribution networks, contract manufacturing, and 3PL relationships., • Experience in servicing retail customers (big box and grocery) strongly preferred., • Experience with ERP systems, • Strong skills in organization and planning, with a demonstrated ability to lead multi-functional teams., • Self-motivated with high energy and an engaging level of enthusiasm., • Exceptional verbal communication and presentation skills., • Strong sense of customer centricity., • Ability to adapt to a changing environment. Compensation: In the spirit of pay transparency, the starting pay for this role is $70k - $95k/year. The range listed above represents a good-faith anticipated range for this position. The actual compensation offered will carefully consider a wide range of factors, including your skills, qualifications, and experience. Please keep in mind that this range is the base pay only and does not consider other components that make up the total rewards package for the position. Brothers International is proud to be an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, pregnancy, disability, age, veteran status, or other characteristics.

Job Description Job purpose: Responsibilities include processes typical to product verification in a machining and assembly environment; measurement of product against design specifications provided on inspection plans and product drawing information using sophisticated and basic measurement devices. Verifying received components meet requirements prior to use. Supporting the calibration process. Assisting Quality Engineering establish inspection plans. Documenting and electronically storing quality records in appropriate network locations. Basic maintenance of inspection equipment. Assisting with the non-conforming material process. Supporting manufacturing personnel with their understanding of measurement techniques. Other items as required. Duties and responsibilities • A skilled position, the Quality Technician is expected to understand the following after investing effort in the role. Specific knowledge will be trained;, • Perform Quality Technician related tasks in a machining and assembly environment in support of meeting the company quality objectives and Manufacturing Operations delivery commitments., • Inspect incoming materials, manufactured components, and finished goods for conformance to internal and/or Customer requirements following AQL and some 100% inspection, utilizing SPC tools. Generation of Discrepant Material Reports when necessary., • Understand flow-down requirements from Customers, how they are communicated to our outside suppliers, how conformity to those requirements are verified during Receiving Inspection, and how conformity to requirements are verified on processes performed in house., • Interface with Purchasing, Engineering and Suppliers in support of discrepant material resolution., • Generate and store computer-based quality related records including the archiving of component and material certifications, certificates of conformance, and First Article Inspection Reports., • Assist with the preparation of First Article Inspection Reports per AS9102. Understand or learn understanding of the Production Part Approval Process (PPAP). • Provide shop floor support to resolve daily quality related product and process issues. Mentor and train manufacturing personnel in proper measurement techniques., • Review quality documentation to ensure product conformance. Recommend improvement and correction to Inspection Plans for supplied and manufactured materials to ensure compliance to Customer drawing and PO requirements., • Control limited life materials such as adhesives to ensure compliance with expiration dates., • Operate CMM and Keyence measurement systems. Train other QA inspectors and technicians in their operation. Attend training for programming these devices., • Support conformance to the Quality Management System with respect to quality inspection needs., • Support Manufacturing Operations delivery commitments to Customers, understanding production timing and prioritization sequencing of work tasks. Strive to support Operations while assuring conformity to product requirements., • Maintain inspection equipment calibrations utilizing calibration records software. Schedule outside services calibration for items not calibrated in house. Ensure verification equipment is working properly. • Obtain Designated Quality Representative Certification, acting on behalf of the certifying Customer as their agent when certifying their product., • Other duties as assigned. Qualifications • Associate degree in technical field or equivalent technical work experience in a manufacturing environment., • 2-5 years of experience manufacturing environment that includes machining and assembly., • Knowledge of computer software programs including Microsoft Office (Word/ Excel / PowerPoint), • Ability to read and understand product drawings that include GD&T requirements., • Experience with sophisticated quality inspection equipment such as Coordinate Measurement Machines, Keyence, laser scanners, and experience with pin gauges, micrometers, calipers, etc., • Experience with layout / surface plate inspection techniques., • Knowledge of statistical sampling plans., • Ability to communicate clearly and effectively, both orally and in writing. Ability to interact well with all levels of personnel throughout the organization as well as suppliers and customers., • Experience working in a regulated industry with certification to AS9100 or ISO9000., • Ability to organize thoughts and prioritize work tasks based on the needs of the operation., • Be able to manage multiple tasks and meet multiple deadlines simultaneously and have a strong sense of urgency., • Be self-motivated, focused, and detail oriented with a positive attitude. Working conditions, • May be exposed to industrial oils, toner, coolants, solvents, lubricants, adhesive and other chemicals. NOTE: All safety precautions will be used., • Plant wide climate control and air conditioning to a steady temperature., • Could work in areas with noise. NOTE: Ear protection available. Physical requirements, • Could require intermittent and long periods of sitting and/or standing., • Some work may be repetitive., • Periodic lifting of materials not to exceed 50 pounds. Arnold Magnetic Technologies is an equal opportunity employer and does not discriminate on the basis of any legally protected status or characteristic. Minority/Female/Sexual Orientation/General Identity/Disability/Veteran #ROC Monday - Thursday, 9:30 AM - 7:00 PM; Friday, 7:30 AM - 11:30 AM

Job Description At Century Mold, we don't just mold parts, our customers come to us with their toughest challenges … and we mold solutions. The plastics industry is full of challenges and the Century Mold team prides themselves on their problem-solving capabilities. We strive to provide and deliver more not only for our customers but for our team as well. Essential Duties and Responsibilities: • Setup and changeover machinery and equipment according to the priorities of the production schedule., • Installation and removal of molds in injection presses., • Setting of process parameters and process limit alarms., • Setting of equipment safety features and low pressure mold protection., • Connection of water, hydraulic and air lines., • Connection and checking of any mold protection switches., • Installation and removal of peripheral equipment (chutes, conveyors, etc.)., • Ensure that the required raw materials are staged in the workstation., • Complete mold travelers as required., • Ensure that the process parameter sheet is reflected in the actual machine settings., • Coordinate with Quality Assurance, Engineering, and Tool Room to ensure machine is producing a quality part., • Must have the ability technically to understand processes in association with mold set-up and manufacturing operations., • Must be able to start a press and bring product up to an acceptable measure at “start-up;” as well as note any changes on a “PROCESS NOTICE” sheet., • Provide operator assistance as required., • Responsible for working with tool engineering and other departments as needed for development of new product., • Must have basic knowledge of materials and the injection molding process., • Must maintain a clean and organized work environment. Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Education and/or Experience: High School diploma or equivalency (G.E.D); or three to five years related experience and/or training; or equivalent combination of education and experience. Computer Skills: Proficient with Microsoft Office Suite; Microsoft Project; Ability to learn new software as needed. Century Mold offers a competitive salary and a comprehensive benefits package that includes annual bonus, paid vacation and holidays, 401(k) matching, HSA contributions, and medical, dental and vision plans. Century Mold is an equal opportunity employer and affords equal consideration to all qualified applicants for all positions without regard to race, color, creed, religion, ancestry, citizenship, national origin, age, gender, sexual orientation and gender identity, disability, marital status, military or veteran status, predisposing genetic characteristics, domestic violence victim status, or any other status protected under local, state, or federal laws. Century Mold offers reasonable accommodation in the employment process for individuals with disabilities. If you need assistance in the application process to accommodate a disability, you may request accommodation at any time by contacting the Human Resources Department. 10:45 p.m.-7:15 a.m.

Job DescriptionJob Description: Isaac Heating & Air Conditioning is seeking an experienced Commercial Install Plumber for their Rochester Location. An ideal candidate should have a background in commercial and/or new construction plumbing, demonstrating proficiency in executing repairs and maintenance tasks with meticulous attention to detail. Summary: For over 75 years, Isaac Heating and Air Conditioning has worked diligently to meet the changing heating and air conditioning needs of homeowners and businesses in Upstate and Central New York. Isaac is one of the nation's largest privately held HVAC/R contractors and services over 35,000 clients a year. Creating an enjoyable experience met with anticipation results in an environment where our team, clients, and community can comfortably grow, prosper, succeed, and improve their quality of life. Isaac partners with leading HVAC and plumbing companies throughout the United States, providing the support and resources of a large national company. Responsibilities: • Work with install teams to complete installation of plumbing systems at commercial project sites, • Perform installation of commercial plumbing equipment and piping in accordance with company requirements, manufacturer specifications and industry standards, • Maintain extensive knowledge of commercial plumbing equipment and piping, • Layout and properly install underground plumbing systems, • Provide accurate as-built drawings to Project Managers, • Perform and participate in onsite equipment start-ups, • Maintain accountability for condition of company tools onsite, • Maintain constant communication with Project Managers and Field Supervisors to ensure project schedule and client needs are being met, • Perform other duties as assigned by your manager Job Qualifications: • High school diploma or equivalent required, • Minimum of 5 years of experience in plumbing required, • OSHA 10 certification will be required upon hire, • Valid driver’s license / clean driving record Competencies: • Excellent written, verbal, and active listening skills, • Exceptional customer service skills, • Technical knowledge, • Strong organizational skills, • Ability to work individually and as part of a team, • Customer-focused, • Problem-solving skills What can we offer you? • Medical, dental, and vision insurance, • Competitive base pay, • Paid vacation and sick time, • Paid holidays, • 401k retirement plan, • Tool Allowance The starting base range for this position is $30 to $40 per hour based on experience. This is the range of the base pay only, it does not include other components that make up the total compensation package of the position. If offered a position, your total compensation package will be determined by experience, location, skills, and/or education which may result in a total compensation package that falls outside of the provided range. This employer participates in E-Verify to verify the employment eligibility of all new hires. E-Verify is a federal program that compares information from Form I-9 to government records to confirm employment eligibility. Isaac Heating & Air Conditioning (subsidiaries and affiliates) is an Equal Opportunity Employer committed to diversity and inclusion in the workplace. All qualified applicants will receive consideration for employment without regard to sex, race, color, age, national origin, religion, physical and mental disability, genetic information, marital status, sexual orientation, gender identity/assignment, citizenship, pregnancy, or maternity, protected veteran status, or any other status prohibited by applicable national, federal, state, or local law.

Float Position It will cover Portsmouth Regional, Dartmouth, Biddeford, Manchester, Greater Boston and North Shore area. PURPOSE AND SCOPE: The professional registered nurse Inpatient RN CAP 2 may be an entry level designation into the Clinical Advancement Program (CAP) for new employees who meet the RN CAP 2 criteria or attained through advancement from CAP 1. This position is accountable and responsible for the provision and coordination of clinically competent care including assessment, planning, intervention and evaluation for an assigned group of patients. This may include delegation of appropriate tasks to direct patient care staff including but not limited to RNs, LVN/LPNs and Patient Care Technicians. As a member of the kidney disease health care team, this position participates in decision-making, teaching, leadership functions, and quality improvement activities that enhance patient care outcomes and program operations. PRINCIPAL DUTIES AND RESPONSIBILITIES: All duties and responsibilities are expected to be performed in accordance with Fresenius Kidney Care policy, procedures, standards of nursing practice, applicable contractual service agreements, state and federal regulations. Performs all essential functions under the direction of the Supervisor and with the guidance from the Educator, Preceptor, or in collaboration with another Registered Nurse. Performs ongoing, systematic collection and analysis of patient data pre – during – post treatment for assigned patients and documents in the patient medical record, makes adjustments or modifications to treatment plan as indicated and notifies Supervisor, Physician, patient’s primary nurse and others as indicated. Assesses, collaborates and documents patient/family’s basic learning needs to provide initial and ongoing education to patients and family. Recognizes aspects and implications of patient status that vary from normal and reports to or collaborates with appropriate health team members for input including but not limited to Supervisor, appropriate physician, and the contracted facility/primary Nurse. Directs and provides safe effective patient care for assigned patients as prescribed for all modality specific treatment procedures. Assesses daily assigned patient care needs and collaborates with direct and ancillary patient care staff as needed. Initiates and coordinates communication with FKC and Non-FKC dialysis providers and appropriate contracted facility personnel as needed to provide continuity of patient care. Performs the implementation, administration, monitoring, and documentation of patient's response to prescribed intradialytic transfusions, including appropriate notification of adverse reactions to physician and appropriate blood supplier. Administers medications as prescribed and documents medical justification and effectiveness. Initiates and assists with emergency response measures. Serves as a resource, leader, coach, mentor and role model for new and incumbent employees by setting examples of appropriate behavior, work habits and attitudes towards patients, co-workers, Supervisors and the company at the facility and area level. May be asked to provide specialized nursing care instructions to hospital/facility staff as stipulated contractually. May be assigned to assist in an Outpatient facility on an as needed basis. May serve as a Preceptor to new employees. Required to complete CAP requirements to maintain or advance. Performs all other duties as assigned by Supervisor. PHYSICAL DEMANDS AND WORKING CONDITIONS : The physical demands and work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The position provides direct patient care that regularly involves heavy lifting, moving of patients and assisting with ambulation. Equipment aids and/or coworkers may provide assistance. This position requires frequent, prolonged periods of standing and the employee must be able to bend over. The employee may occasionally be required to move, with assistance, machines and equipment of up to 200 lbs., and may lift chemical and water solutions of up to 30 lbs. as high as 5 feet. The work environment is characteristic of a health care facility with air temperature control and moderate noise levels. May be exposed to infectious and contagious diseases/materials. May be asked to provide essential functions of this position in other locations with the same physical demands and working conditions as described above. Day to day work includes desk work, computer work, interaction with patients, facility/hospital staff and physicians. The position requires travel to training/meeting sites and between assigned facilities. Position requires participation in on-call rotation, night, weekend, holiday or as defined by individual program needs. Employees are required to take the Ishihara's Color Blindness test as a condition of employment. Note that: Failing the Ishihara Test for Color Blindness does not preclude employment. The Company will consider whether reasonable accommodation can be made. SUPERVISION: Assigned oversight of Patient Care Technicians/LPNs/LVNs/RNs as a designated Nurse in Charge, after meeting all the following: Successful completion of all FKC education and modality specific training requirements. 6 months experience in acute dialysis as a RN. EDUCATION AND LICENSURE: Current appropriate state licensure. Current or successful completion of CPR BLS Certification Must meet the practice requirements in all states employed. EXPERIENCE AND REQUIRED SKILLS : Entry level for RNs with minimum 2 years or more of Nephrology Nursing experience in the last 2 years as a RN. Acute dialysis experience (preferred). Fresenius Medical Care maintains a drug-free workplace in accordance with applicable federal and state laws. EOE, disability/veterans

Job Description Whitestone Associates, Inc., a 100% employee-owned company and leading provider of environmental and geotechnical engineering and consulting services throughout the eastern US, is currently recruiting for an Environmental Project Manager to join our team. This is a tremendous opportunity for experienced candidates to join and contribute to the growth of a 100% employee-owned engineering firm. We are seeking a motivated and enthusiastic Environmental Project Manager to join our team. The ideal candidate will have 5+ years of experience in environmental due diligence and remediation. This position requires a bachelor's degree in environmental science, geology, or a related field. The role is primarily office-based but may require some field visits depending on project complexity and staff training. Primary responsibilities include: data analysis, technical report preparation, technical report review, proposal development, and project coordination. Location: Rochester, NY Responsibilities: • Support overall project management including scheduling, coordinating, and client interface;, • Prepare accurate and concise technical reports adhering to established guidelines;, • Review and edit technical reports;, • Provide mentorship and training to junior level staff;, • Conduct field sampling activities including soil, groundwater, and vapor sampling as per project requirements and regulatory guidelines on an as needed basis;, • Conduct environmental due diligence assessments including Phase I and Phase II Environmental Site Assessments on an as needed basis;, • Manage hazardous building materials assessments including asbestos, lead-based paint, mold, and indoor air quality evaluations, and oversee related sampling, analysis, and reporting activities;, • Analyze and interpret field data, laboratory results, and historical information to support the preparation of technical reports; and, • Stay up to date with current regulations and industry standards. Requirements: • Bachelor's degree in Environmental Science, Geology, or related field;, • 5+ years of relevant experience in environmental consulting preferred, particularly in the areas of due diligence investigation and remediation;, • Strong analytical and problem-solving skills, with the ability to interpret and analyze data;, • Excellent written and verbal communication skills;, • Ability to work independently and collaboratively in a team environment, managing multiple projects and deadlines simultaneously; and, • Professional Geologist certification (preferred but not required)., • ASTM Certified Environmental Professional (preferred but not required). Benefits: • The estimated salary range for this position is $75,000 to $100,000., • Whitestone's Employee Stock Ownership Program (offered at no cost to each eligible employee), • Medical Insurance, • Dental Insurance, • Health & Dependent Care Flexible Spending Accounts, • Traditional & Roth 401K Plans with Company Match, • Long Term & Short Term Disability Insurance, • Company-Sponsored Life & AD&D Insurance, • Multiple AFLAC Insurance Products, • Pet Insurance, • Identity Theft Protection, • Multiple Corporate Discount Programs

Job Description High‑Tolerance CNC Operator — Aerospace Components Rochester, NY | $20–$40/hr (DOE) | Overtime: 10+ hrs/week Is this you? • Do you thrive turning blueprints into flawless parts with tight tolerances?, • Are you confident setting up CNC equipment, changing tools, and dialing in offsets?, • Do you take pride in meticulous inspection using precision measuring tools? If you answered yes, TekPro’s aerospace manufacturing partner in Rochester wants to meet you. You’ll join a stable, precision‑focused team in an air‑conditioned environment where quality and safety drive every decision—and where consistent overtime boosts your earnings. What you’ll handle • Operate and set up CNC machines for aerospace‑grade components, • Read engineering drawings/blueprints and plan machining steps, • Perform tool changes, offsets, and adjustments to hold spec, • Inspect and validate parts with precision measurement instruments, • Maintain efficiency while meeting strict quality and safety standards, • Support continuous improvement initiatives on the shop floor What it takes, • 1+ year of CNC machine operation, • Blueprint literacy and proficiency with precision measuring tools, • Experience with setups, tooling, and offsets preferred, • An eye for detail and commitment to producing premium‑quality parts, • Dependable for a set shift with overtime opportunities Why you’ll want this role, • $20–$40 per hour based on experience, • 10+ hours of weekly overtime available, • Clean, high‑precision aerospace shop with air conditioning, • Long‑term opportunities with a stable precision manufacturer Ready to advance your CNC career? Apply through TekPro to explore next steps.

L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers' mission and quest for professional growth. L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do. L3Harris is the Trusted Disruptor in defense tech. With customers' mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security. Job Title: Technical Manager - Systems Engineering Job Code: 38532 Job Location: Rochester, New York Job Schedule: 9/80 (Every Other Friday Off!) Job Description: The Technical Manager - Systems Engineering provides technical and organizational leadership for the development, integration, and delivery of complex defense and aerospace systems. This role leads systems engineering activities across the full system lifecycle, from concept development and requirements definition through integration, verification, validation, production transition, and sustainment support. The position is responsible for managing teams supporting mission-critical programs while ensuring alignment with customer needs, contractual obligations, airworthiness or mission assurance expectations, and organizational objectives. The ideal candidate brings strong people leadership, deep systems thinking, and demonstrated success leading multidisciplinary engineering efforts in a highly regulated defense or aerospace environment. Essential Functions: • Lead, mentor, and develop a team of systems engineers supporting defense and aerospace programs, platforms, or technology initiatives., • Direct systems engineering execution across the program lifecycle, including concept of operations, requirements analysis, system architecture, interface definition, integration, verification, validation, and operational support., • Ensure technical execution aligns with customer requirements, program cost and schedule constraints, mission performance objectives, and contract deliverables., • Oversee development and maintenance of system requirements, interface control documentation, verification traceability, and technical baselines., • Contribute directly to program performance leveraging technical expertise and experience to system architecture, design, implementation, test, integration and sustainment., • Lead root cause corrective action investigations, provides independent review team perspective, participate in non-advocate reviews., • Lead technical planning, risk management, trade studies, design decision support, and system-level problem resolution., • Support major program reviews and customer reviews, including SRR, PDR, CDR, TRR, PRR, and related milestone events., • Collaborate with program management, chief engineers, software, hardware, test, manufacturing, quality, supply chain, and field support teams to ensure integrated program execution., • Drive compliance with defense, aerospace, safety, quality, airworthiness, cybersecurity, and mission assurance requirements, as applicable., • Manage staffing, workload planning, performance management, employee development, and succession planning within the systems engineering organization., • Provide technical leadership for integration and test planning, requirements verification, anomaly resolution, and qualification activities., • Support proposal efforts, technical volume development, basis of estimate preparation, technology roadmaps, and capture activities for new business opportunities., • Identify and mitigate technical, programmatic, and integration risks across complex system-of-systems environments., • Promote continuous improvement in systems engineering processes, digital engineering practices, MBSE adoption, and technical rigor., • Serve as a key interface to customers, suppliers, subcontractors, and senior leadership on program status, technical issues, and strategic engineering matters. Qualifications: • Bachelor's Degree and minimum 9 years of prior relevant experience. Graduate Degree and a minimum of 7 years of prior related experience. In lieu of a degree, minimum of 13 years of prior related experience., • 9+ years of progressive engineering experience, including significant systems engineering experience in defense, aerospace, avionics, mission systems, C4ISR, weapons, space, radar, communications, or other complex regulated environments., • 5+ years of leadership experience managing technical teams, engineering organizations, or major engineering work scopes., • Ability to obtain and a secret security clearance Preferred Additional Skills: • Master's degree in Systems Engineering, Aerospace Engineering, Engineering Management, or a related discipline., • Active security clearance., • Experience supporting airborne, space, maritime, ground, or integrated mission systems programs., • Familiarity with model-based systems engineering tools and methods., • Experience with requirements and lifecycle management tools such as DOORS or similar platforms., • Knowledge of digital engineering, simulation, system modeling, and mission-level analysis approaches., • Experience with military standards, aerospace standards, mission assurance practices, and airworthiness or certification processes, as applicable., • INCOSE certification, PMP certification, or other relevant engineering leadership credentials., • Experience supporting competitive captures, proposal strategy, technical solution development, and customer briefings., • Understanding of cybersecurity, system safety, reliability, maintainability, and human systems integration considerations in defense systems., • Demonstrated success leading teams through complex integration, test, and fielding activities., • Ability to balance strategic technical leadership with day-to-day execution in a fast-paced, high-consequence environment., • Demonstrated experience applying systems engineering processes across the full lifecycle of complex aerospace or defense systems., • Experience with requirements decomposition, functional analysis, architecture development, interface management, integration, verification, validation, and configuration control., • Experience leading cross-functional engineering teams in a matrixed program environment., • Strong knowledge of DoD, aerospace, or other regulated development frameworks, technical review processes, and program execution disciplines., • Experience with technical risk management, failure analysis, root cause investigation, and corrective action planning., • Strong communication and presentation skills, with the ability to engage effectively with customers, program leadership, and executive stakeholders., • Familiarity with classified or export-controlled environments and the ability to work within those constraints. In compliance with pay transparency requirements, the salary range for this role in New York is $110,500 - $205,500. This is not a guarantee of compensation or salary, as final offer amount may vary based on factors including but not limited to experience and geographic location. L3Harris also offers a variety of benefits, including health and disability insurance, 401(k) match, flexible spending accounts, EAP, education assistance, parental leave, paid time off, and company-paid holidays. The specific programs and options available to an employee may vary depending on date of hire, schedule type, and the applicability of collective bargaining agreements. #LI-ZB1 L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law. Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information. By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions. L3Harris Technologies is an E-Verify Employer. Please click here for the E-Verify Poster in English or Spanish . For information regarding your Right To Work, please click here for English or Spanish .

Job Description Experienced HVAC Service Technician Turnbull Heating & Air I’m looking to add an experienced HVAC Service Technician to our team at Turnbull Heating & Air, a family-owned company serving our community for over 60 years. We’re focused on quality work, long-term relationships, and taking care of our people. If you’re a skilled technician who takes pride in doing things the right way and wants stability with a company that’s been around for decades—and plans to be around for decades more—this may be a good fit. What You’ll Be Doing Diagnose, service, and repair residential and light commercial HVAC systems Communicate clearly and professionally with customers Complete work efficiently and correctly the first time Maintain clean, accurate service documentation Represent the company with professionalism and integrity What I’m Looking For 5+ years of HVAC service experience preferred Strong diagnostic and troubleshooting skills EPA Certification (required) Valid driver’s license and clean driving record Reliable, self-motivated, and accountable Someone who wants to build a long-term career, not just bounce job to job What We Offer Hiring Bonus (details discussed during interview) Competitive pay, based on experience Tuition reimbursement for approved training and continuing education Company vehicle and tools (for qualified technicians) Health benefits and paid time off A stable, family-owned company with 60 years in business Straightforward management and realistic expectations Why Turnbull We’re not a private-equity roll-up. We’re not a churn-and-burn shop. We’re a long-standing local company that values craftsmanship, loyalty, and mutual respect. If you do good work, show up, and take care of customers, you’ll be treated well here. Apply today and let’s have a straightforward conversation.

Job Description The Role General Motors has a need for qualified Mechanical Journeypersons (Pipefitter). You will work under minimal supervision with a high level of independent judgement and problem solving. You should be flexible enough to take on and tackle multiple job assignments in a shift. Preferred Experience Includes: \n • Experience with planned maintenance systems and predictive technologies\n, • Experience with industrial robotics, automation, and conveyance systems\n\n Primary Responsibilities: \n • Follow established safety procedures according to OSHA standards and company procedures\n, • Maintain, dismantle, repair, and replace mechanical and hydraulic components (e. g. bearings, seals, details, carriers, etc.) on industrial machinery such as shafting, motors, generators, air compressors, engines, pumps, cylinders, gears, couplings, linkages, ball screws, high speed CNC spindles, coolant systems and filters, and combustion equipment and valves\n, • Layout, assemble, fabricate, maintain, and repair piping systems\n, • Use various hand or power tools for measuring, cutting, threading, grooving, bending, soldering, assembling, joining, and installing pipes, valves, and fittings\n, • Read and interpret blueprints for the mechanical operation and assembly of conveyor systems, material handling systems, robots, and other automation\n, • Operate mobile equipment (e.g. forklifts, vertical lifts, cranes)\n, • Determine loading requirements to rig equipment and material for lifting\n, • Set up and operate conventional or computer numerically controlled (CNC) machine tools such as lathes, milling machines, and grinders to cut, bore, grind, or otherwise shape parts to prescribed dimensions and finishes\n, • Fabricate punches, tools, steel rule tools and t-sets to exact specifications\n, • Plan sequences of operations for fabricating tools or assemblies using blueprints, sketches, or models\n, • Determine quality of finished products, ensuring defect-free parts, by verifying dimensions, alignment, and clearances for conformance to specifications using measuring instruments such as calipers, gauge blocks, micrometers, and dial indicators\n\n Interested individuals must meet the following minimum qualifications: \n • At least six (6) years of related experience in a Mechanical trade (millwright, pipefitter, toolmaker, machine repair) or a U.S. Department of Labor Certificate of Completion in a Mechanical trade (millwright, pipefitter, toolmaker, machine repair). \n, • Must be able to satisfactorily complete the General Motors hiring process requirements which includes comprehensive assessments, drug testing, and a background check\n, • At least 18 years of age \n, • Eligible to work in the United States \n, • Must be willing to work flexible shift hours and day, afternoon, or night shifts as well as overtime hours daily, weekend and holidays on those shifts with little notice \n, • GM DOES NOT PROVIDE IMMIGRATION-RELATED SPONSORSHIP FOR THIS ROLE. DO NOT APPLY FOR THIS ROLE IF YOU NEED OR WILL NEED GM IMMIGRATION SPONSORSHIP TO WORK OR TO REMAIN EMPLOYED AT GM (e.g., H-1B, TN, STEM OPT, etc.). \n, • \nIf you are a current GM employee operating under a collective bargaining agreement, please contact your local HR/LR for employee placement opportunities.\n, • This position may be filled with a Journeyperson or Journeyperson In Training, the compensation ranges for a JIT include ($37.42 - $43.66) or Journeyperson rate of $44.55. Certificates/credentials and scoring in interview will determine your status and pay.\n\n Physical Requirements \n • Quick response to safety instructions, alarms, and signals are a must\n, • Ability to work and stand for extended periods\n, • Comfortably wear personal protective equipment\n, • Navigate a busy environment\n, • Bend, twist, kneel, crouch, and reach\n, • May need to lift or carry materials weighing up to 50 lbs. depending on department\n, • Occasional sitting during certain tasks\n, • Drive mobile equipment when needed\n\n General Motors UAW hourly employment offers a very competitive compensation and benefit package. An annual incentive payout is also available, as qualified. Relocation and travel expenses will be the responsibility of the applicant. Please note - per the labor agreement between GM and the UAW, GM may share information and documentation relating to the credentials of applicants for this position (e.g., resumes, journeyperson cards, interview notes, certificates, etc.) with UAW personnel who have a need to know as part of their role on the UAW skilled trades team. About GM Our vision is a world with Zero Crashes, Zero Emissions and Zero Congestion and we embrace the responsibility to lead the change that will make our world better, safer and more equitable for all. Why Join Us We believe we all must make a choice every day - individually and collectively - to drive meaningful change through our words, our deeds and our culture. Every day, we want every employee to feel they belong to one General Motors team. Benefits Overview From day one, we're looking out for your well-being-at work and at home-so you can focus on realizing your ambitions. Learn how GM supports a rewarding career that rewards you personally by visiting Total Rewards resources. Non-Discrimination and Equal Employment Opportunities (U.S.) General Motors is committed to being a workplace that is not only free of unlawful discrimination, but one that genuinely fosters inclusion and belonging. We strongly believe that providing an inclusive workplace creates an environment in which our employees can thrive and develop better products for our customers. All employment decisions are made on a non-discriminatory basis without regard to sex, race, color, national origin, citizenship status, religion, age, disability, pregnancy or maternity status, sexual orientation, gender identity, status as a veteran or protected veteran, or any other similarly protected status in accordance with federal, state and local laws. We encourage interested candidates to review the key responsibilities and qualifications for each role and apply for any positions that match their skills and capabilities. Applicants in the recruitment process may be required, where applicable, to successfully complete a role-related assessment(s) and/or a pre-employment screening prior to beginning employment. To learn more, visit How we Hire. Accommodations General Motors offers opportunities to all job seekers including individuals with disabilities. If you need a reasonable accommodation to assist with your job search or application for employment, emailus or call us at 1-800-865-7580. In your email, please include a description of the specific accommodation you are requesting as well as the job title and requisition number of the position for which you are applying.

L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers' mission and quest for professional growth. L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do. L3Harris is the Trusted Disruptor in defense tech. With customers' mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security. Job Title : Production Support D Job Code: 38174 Job Location: JROC Rochester, New York Job Schedule: 3 rd Shift 3/36 Job Description: At L3Harris Technologies, we deliver trusted, innovative solutions in support of our customers' mission-critical needs. The Production Support D Stockroom role is an advanced-level position within the Jefferson Road Operations Center (JROC), responsible for ensuring efficient material flow and production readiness in a dynamic manufacturing environment. This role combines stockroom execution with production support responsibilities and includes a strong emphasis on team support, coordination, and development. The successful candidate will act as a key resource on the floor, helping to guide daily operations, reinforce standard work, and support the effectiveness of the broader team. Essential Functions: \n • Coordinate daily stockroom and material flow activities to support production schedules and priorities \n, • Ensure timely and accurate delivery of materials to production lines to maintain operational continuity \n, • Serve as a floor-level leader and resource, supporting team members in execution of standard work and resolving day-to-day challenges \n, • Assist in onboarding, training, and development of team members, reinforcing best practices and process adherence \n, • Promote a team-oriented environment focused on safety, quality, and accountability \n, • Identify material shortages, constraints, or process gaps and take proactive steps to resolve issues \n, • Perform inventory transactions, cycle counts, and audits to ensure system and physical accuracy \n, • Collaborate cross-functionally with production, supply chain, and operations teams to align priorities and improve workflow \n, • Support and actively participate in continuous improvement (CI) and Lean initiatives, including process optimization and waste reduction \n, • Utilize systems and data to monitor performance, identify trends, and support operational decision-making \n\n Required Qualifications: Requires a High School Diploma or equivalent and a minimum of 8 years of prior relevant experience or 2 years post-Secondary/Associates Degree with a minimum of 4 years of prior related experience. Preferred Additional Skills: \n • Experience in a Team Lead, Lead Operator, or informal leadership role \n, • Background in Lean Manufacturing, Continuous Improvement (CI), or related methodologies \n, • Experience with employee training, mentoring, or onboarding \n, • Familiarity with ERP/MRP systems and inventory control processes \n, • Ability to influence team performance and drive accountability without direct supervisory \n\n In compliance with pay transparency requirements, the salary range for this role in New York state is $49,500 - $91,500. This is not a guarantee of compensation or salary, as final offer amount may vary based on factors including but not limited to experience and geographic location. L3Harris also offers a variety of benefits, including health and disability insurance, 401(k) match, flexible spending accounts, EAP, education assistance, parental leave, paid time off, and company-paid holidays. The specific programs and options available to an employee may vary depending on date of hire, schedule type, and the applicability of collective bargaining agreements. L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law. Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information. By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions. L3Harris Technologies is an E-Verify Employer. Please click here for the E-Verify Poster in English or Spanish . For information regarding your Right To Work, please click here for English or Spanish .

Job Description ⚙️ Now Hiring: CNC Operators & Machinists Rochester, New York $20 – $40/hour (based on experience) ⏱ Overtime Available – 10+ Hours/Week TekPro, a direct recruitment firm partnering with leading aerospace and precision manufacturing companies, is seeking skilled CNC Operators and Machinists for a precision manufacturing facility in Rochester, NY. This role is ideal for machinists and operators looking to work in a high-precision aerospace environment with consistent overtime and strong earning potential. Key Responsibilities Operate and set up CNC machines to produce precision components Read and interpret engineering drawings and blueprints Perform tool changes, offsets, and machine adjustments Inspect parts using precision measuring tools to ensure tight tolerances Maintain production efficiency while adhering to quality and safety standards Support continuous improvement initiatives in the shop ✅ Qualifications 1+ years of experience operating CNC machinery Ability to read blueprints and use precision measuring instruments Experience with machine setups, tooling, and offsets preferred Strong attention to detail and commitment to producing high-quality parts Ability to work scheduled shift with overtime opportunities Major Highlights & What’s Offered $20 – $40/hr depending on experience Overtime available – 10+ hours per week for additional earnings Work in a clean, high-precision aerospace manufacturing environment Air-conditioned facilities for a comfortable work environment Long-term career opportunities with a stable precision manufacturer Interested or know someone who might be a fit? Send a message or apply through TekPro to learn more about this opportunity.

Job Description Commercial HVAC Technician & Sheet Metal Worker We are seeking experienced Commercial HVAC Technicians and Sheet Metal Workers to join our team in Rochester, NY. The ideal candidates will specialize in the installation, maintenance, and repair of HVAC systems and sheet metal components for commercial buildings. This position requires expertise in large-scale systems, attention to detail, and a commitment to safety and quality work. Key Responsibilities: • HVAC System Installation & Maintenance: Install, assemble, and repair commercial HVAC systems, including ductwork, air handlers, chillers, boilers, and ventilation systems., • Sheet Metal Fabrication & Installation: Measure, cut, assemble, and install sheet metal ductwork and components according to project specifications., • Blueprint & Code Compliance: Read and interpret blueprints, specifications, and building codes to ensure proper installation and compliance., • Welding & Fabrication: Perform welding, soldering, and cutting of HVAC ductwork and sheet metal using specialized tools and equipment., • Safety Adherence: Maintain a safe working environment and follow OSHA, company, and industry safety protocols. Qualifications: • Minimum of 3 years of experience as an HVAC Technician or Sheet Metal Worker, specifically in commercial construction., • Extensive knowledge of commercial HVAC systems, ductwork fabrication, and hydronic systems., • Ability to read and interpret commercial blueprints and schematics., • Proficiency in using HVAC-specific tools, including duct fabrication equipment, metal cutting tools/ machines, and welding tools., • Physical stamina to lift heavy materials, climb ladders, and work in challenging environments. Total Compensation up to $72.24 per hour including premium benefits. Company DescriptionGreat time to get involved with this rapidly growing company!Great time to get involved with this rapidly growing company!

Position Summary: Participates in surgical procedures, assists the registered nurse in‐patient care, maintains aseptic technique, prepares sterile and non‐sterile supplies and equipment. Anticipates the needs of the surgeon as required. Education, License & Cert: Graduate of an accredited Surgical Technician School, or LPN with a current license in the state of practice, or completion of a completed and appropriate training program for surgical technology in the United Sates Army, Navy, Air Force, Marine Corps, Coast Guard, or Public Health Service Commissioned Corps. Certified Surgical Technologist (CST) certification preferred. Subject to state specific grandfather clauses, candidate may be exempt from degree requirement. Experience: Experience preferred, but may be trained on -the-job, if recent graduate. Must have general knowledge of surgical procedures and draw specialized training from working with physician or physicians on the job. Essential Functions: 1. Completion of hospital and department specific orientation., 2. Perform basic aseptic technique in accordance to policy and procedure of Corning Hospital., 3. Basic knowledge of instrumentation for minor cases., 4. Scrub minor cases alone., 5. Working knowledge of electrocautery, suction apparatus, surgical tables, autoclave and steris processes and patient safety principles in the OR., 6. Knowledge of surgical anatomy for each case scrubbed., 7. Know surgical terminology specific to each case scrubbed., 8. Knowledge of standard precaution guidelines of Corning Hospital, 9. Knowledge of instrumentation for all cases., 10. Scrub all cases offered in the Operating Room., 11. Knowledge of the use of specialty equipment, i.e.: ophthalmology microscope, laser, video endoscopy equipment, fracture table)., 12. Certification as an OR technician recommended., 13. Functions in an “on call” capacity when assigned., 14. Becomes proficient in a surgical specialty to maintain equipment, order supplies and perform inservice training for OR staff as requested. Other Duties: 1. Participates in patient care under the supervision of the surgeon, professional nurse and anesthesiologist., 2. Is authorized to access secured storage areas in the performance of essential job functions and duties., 3. Assists in the care, preparation and maintenance of sterile and unsterile supplies and equipment., 4. Works with Central Supply staff to ensure sterility of equipment., 5. Performs supportive functions related to surgical procedures following principles of sterile technique., 6. Follows Standard Precautions and utilizes disease specific precaution guidelines as per CDC guidelines., 7. Utilizes and maintains surgical instruments according to manufacturer’s recommendations and department guidelines., 8. Follows hospital safety guidelines., 9. Follows all hospital Policies and Procedures., 10. Participates and actively supports PI activities., 11. Maintains biannual CPR., 12. Completes annual education update., 13. Attends and participates in Staff Development meetings., 14. Completes at least 12 hours continuing education annually., 15. Maintains certification, if applicable., 16. Assists in orientation of new personnel to the department as well as developing skills of other staff members when requested or appropriate., 17. Completes in‐services and self‐learn education programs as required., 18. Rotates as needed on all shifts and days as requested; regularly demonstrates flexibility on an “on‐call” basis., 19. Demonstrates good judgement and planning when responding to requests or questions while interacting with physicians, patients, and families., 20. Responds to schedule/assignment changes quickly., 21. Consistently shows good judgement by showing an appreciation of cost and quality., 22. Reports any changes in the patient’s condition to appropriate personnel., 23. Refers unsolved problems and consults with the appropriate person in order to pursue problem resolution through proper chain of command., 24. Respects, at all times, the confidentiality of patient’s records, the progress, and utilizes complete discretion when discussing patient matters., 25. Displays confidence and shows respect to patients, families, physicians, and other health care workers by performing job related duties in a highly professional manner at all times., 26. Readily assists, supervises, delegates or consults with other staff members when requested or appropriate. Requests assistance from others as needed., 27. Displays positive attitude/working relationships toward all internal and external customers., 28. Demonstrates ability and judgement to coordinate simultaneous work requirements. Completes all scheduled assignments without sacrificing quality of care performed., 29. Willing to accept additional responsibilities and duties related to the operation of the department as permitted., 30. Performs duties in an independent manner with little or no direct supervision., 31. Schedules benefit time appropriately. Acceptable attendance practices., 32. Provides timely notification for absence or tardiness (2 hours)., 33. Takes appropriate breaks and returns promptly., 34. Observes hospital dress code: wears identification badge while on duty and maintains a professional appearance at all times., 35. Consistently strives to be an effective and productive member of the department and of the organization., 36. Performs other duties as assigned. Rev: 2/23/26 Payrate: $28.41 to $41.80

Job Description Job purpose Responsible for assembly and/or scanning of small or medium sized parts, fitting and/or adjustment of interrelated parts and/or assembly, adjustment and/or repair of sub-assemblies and major assemblies per process sheets. Could also be responsible for teardown, cleaning and reassemble of refurbs. Duties and responsibilities • Maintains proper quality and quantities of manufactured materials., • Operate small equipment such as presses, magnetizing/demagnetizing equipment, scanners., • Perform SPC on all related jobs as required., • Operate degreasing systems as required., • Able to set-up equipment where applicable., • Able to calibrate and zero equipment., • Perform preventative maintenance., • Use general measuring instruments, such as indicator, calipers, and height gages., • Rotate from one job to another if needed., • Maintain accurate documentation., • Follows all established company policies, • Follows all established safety procedures and precautions. Including filing incident/accident reports., • Notifies Supervisor of all unsafe/hazardous conditions or defective equipment., • Other duties as assigned Qualifications • High School Diploma/GED, • Be able to follow written and oral instructions., • Previous employed in a production environment helpful., • Able to communicate., • Math aptitude., • Mechanical capabilities helpful. Working conditions • May be exposed to industrial oils, toner, coolants, solvents, lubricants, adhesive and other chemicals. NOTE: All safety precautions will be used., • Plant wide climate control and air conditioning, • Could work in areas with excessive noise. NOTE: Ear protection available., • Certain jobs extremely dirty. NOTE: Smocks or work outfits provided. Physical requirements • Could require intermittent and long periods of sitting and/or standing., • Required to do repetitive work., • Periodic lifting of materials not to exceed 50 pounds. Hours: Monday through Thursday, 2:45 pm to 12:15 am, Fridays 2:45 pm - 6:45 pm #ROC Arnold Magnetic Technologies is an equal opportunity employer and does not discriminate on the basis of any legally protected status or characteristic. Minority/Female/Sexual Orientation/General Identity/Disability/Veteran B Shift: Mon-Thurs: 2:45pm - 12:15am Fri: 2:45pm - 6:45pm

Job Description Job purpose Responsible for assembly and/or scanning of small or medium sized parts, fitting and/or adjustment of interrelated parts and/or assembly, adjustment and/or repair of sub-assemblies and major assemblies per process sheets. Could also be responsible for teardown, cleaning and reassemble of refurbs. Duties and responsibilities • Maintains proper quality and quantities of manufactured materials., • Operate small equipment such as presses, magnetizing/demagnetizing equipment, scanners., • Perform SPC on all related jobs as required., • Operate degreasing systems as required., • Able to set-up equipment where applicable., • Able to calibrate and zero equipment., • Perform preventative maintenance., • Use general measuring instruments, such as indicator, calipers, and height gages., • Rotate from one job to another if needed., • Maintain accurate documentation., • Follows all established company policies, • Follows all established safety procedures and precautions. Including filing incident/accident reports., • Notifies Supervisor of all unsafe/hazardous conditions or defective equipment., • Other duties as assigned Qualifications • High School Diploma/GED, • Be able to follow written and oral instructions., • Previous employed in a production environment helpful., • Able to communicate., • Math aptitude., • Mechanical capabilities helpful. Working conditions • May be exposed to industrial oils, toner, coolants, solvents, lubricants, adhesive and other chemicals. NOTE: All safety precautions will be used., • Plant wide climate control and air conditioning, • Could work in areas with excessive noise. NOTE: Ear protection available., • Certain jobs extremely dirty. NOTE: Smocks or work outfits provided. Physical requirements • Could require intermittent and long periods of sitting and/or standing., • Required to do repetitive work., • Periodic lifting of materials not to exceed 50 pounds. Hours: A Shift: Mon-Thurs: 5:30am-3:00pm Fri: 5:30am-9:30am #ROC Arnold Magnetic Technologies is an equal opportunity employer and does not discriminate on the basis of any legally protected status or characteristic. Minority/Female/Sexual Orientation/General Identity/Disability/Veteran A Shift: Mon-Thurs: 5:30am-3:00pm Fri: 5:30am-9:30am

Job Description ASSEMBLER Advantech Industries, Inc. is a family-owned manufacturing company based in Rochester, New York, specializing in CNC machining, sheet metal fabrication, welding, and assembly services. The company, founded in 2002, serves multiple industries, including defense, medical, and aerospace, and operates out of a 250,000-square-foot facility. We are currently seeking an individual to collaborate with us as an Assembler. The Assembler is responsible for the assembly of product according to the project specifications, assisting with the final product preparation for delivery while visually inspecting parts and assembled pieces for defects. DUTIES & RESPONSIBILITIES • Assembles product according to project specifications., • Visually inspects parts and assembled pieces for defects and touches up paint finish as needed., • Assists Shipping and Receiving with preparing the product for delivery. SKILLS & QUALIFICATIONS • High School Diploma or GED., • 1-2 years of previous manufacturing experience., • Ability to use an air gun, air drivers, other hand and power tools and a pallet truck., • Alignment with the requirements and principles of the Advantech Quality Management System and ISO 9001:2015., • Skills to operate assigned equipment safely and efficiently., • Capacity to handle changes in business operations and adjust to new situations., • Preparedness to sit for extended periods and manipulate items with dexterity., • Ability to work with limited supervision. JOB BENEFITS • Vacation, • Sick Days, • Holidays, • Health Insurance, • Dental Insurance, • Vision Insurance, • Life Insurance, • Voluntary Disability Insurance, • 401(k) Plan with Company Match According to the New York Pay Transparency law, pay range for this job is $18.00 - $27.00 / hour. The actual compensation will be determined based on experience and other factors permitted by law. Advantech Industries Inc. is a Drug-Free Workplace. Employment is contingent upon the successful completion of a pre-employment drug screen. ITAR Restricted: This position is restricted to US Citizens, Permanent Residents or Green Card Holders EOE/AA Race/Color/Sex/Religion/National Origin/Disability/Veteran Advantech Industries Inc. is committed to providing a work environment that is free from unlawful discrimination and harassment in any form and will make reasonable accommodation for qualified individuals with disabilities unless doing so would result in an undue hardship. If you are interested in applying for employment and feel you need a reasonable accommodation pursuant to the ADA, you are encouraged to contact Human Resources. Monday through Friday 7:30 am to 4:00 pm Full time employment (39.75 hours per week)

MISSION (Commander's Intent) Lead a high-performance maintenance operation that keeps a critical fleet and heavy equipment safe, reliable, and mission-ready. This role ensures all vehicles and assets remain operational -- supporting essential service delivery and the teams who depend on consistent equipment uptime. Success means building a culture where safety, accountability, and technician development are the foundation of every shift. PERFORMANCE OBJECTIVES (First 12 Months) • Fleet Readiness: Achieve 95%+ equipment availability across all fleet assets through proactive maintenance scheduling and rapid repair turnaround., • Safety Leadership: Enforce a zero-incident safety standard through daily toolbox talks, disciplined LOTO procedures, and compliance training., • Team Development: Coach and develop a team of diesel technicians, fostering cross-training, skill growth, and diagnostic readiness., • Operational Excellence: Identify and implement process improvements that reduce unplanned downtime and increase overall shop productivity., • Cost Management: Maintain disciplined budget control across labor, parts, and vendor repairs while sustaining high service quality., • Compliance & Documentation: Ensure all maintenance records meet applicable federal, state, and internal audit standards. FIT TRAITS (Human Profile) • Hands-on, lead-from-the-floor style; earns trust through credibility and presence, • Views safety and mentorship as core leadership behaviors -- not add-ons, • Confident diagnosing mechanical, electrical, and hydraulic systems, • Decisive under pressure; prioritizes people and process equally, • Communicates clearly across levels -- from technicians to senior leadership, • Models integrity, respect, and continuous improvement WHY THIS ROLE MATTERS Equipment doesn't fail in a vacuum -- it fails people. The leader in this role is the critical link between operational safety, service reliability, and the community that depends on it. This is not a desk job. It is a leadership role for someone who takes pride in precision, develops technicians who take pride in their work, and understands that a well-run shop is a direct expression of organizational values. Requirements Required Experience • Must have served in the U.S. Army, U.S. Navy, U.S. Marine Corps, U.S. Air Force, U.S. Coast Guard, U.S. Space Force, U.S. Reserves, or U.S. National Guard, • Proven success managing fleet or heavy-equipment maintenance operations in transportation, industrial, or municipal environments, • Strong technical background in diesel engines, hydraulics, electrical systems, and diagnostics, • Demonstrated leadership in technician training, performance management, and culture building Preferred Profile • Military veterans with senior enlisted or warrant officer backgrounds in motor transport, maintenance management, or logistics are highly aligned, • Familiarity with OSHA, DOT, and EPA compliance standards, • Proficiency with maintenance tracking systems and Microsoft Office or equivalent Benefits • Estimated compensation range: $95,000 – $115,000 annually (based on experience)., • Comprehensive benefits typically include medical, dental, vision, 401(k), PTO, and professional development pathways.

Job Description About the JCC of Greater Rochester The JCC of Greater Rochester is a mission-driven community organization rooted in Jewish values and open to individuals and families of all backgrounds. The JCC serves as a center for connection, learning, wellness, and belonging, advancing Jewish life while strengthening the broader community through inclusive programs and services. Our work is guided by core Jewish values, including Kehillah (community), Kavod (respect and dignity), Hachnasat Orchim (welcoming and belonging), Shmirat HaGuf (care for the body and well-being), and Chesed (compassion). These values inform how we care for people, steward resources, and create physical spaces that are safe, welcoming, and reflective of our mission. The JCC encompasses a nearly 200,000 square foot facility on approximately 18 acres of developed campus, including parking and primary operations, along with an additional 10 acres of adjacent land dedicated to outdoor amenities—such as fields, tennis courts, and splash pad—and future campus development. Originally built in 1973 and expanded multiple times over the past five decades, the campus reflects both the organization’s history and its future. The JCC is currently investing in facility upgrades, deferred maintenance, and long-term master site planning to ensure the campus continues to serve the community for generations to come. Our Values in Action • Kehillah (Community): Creating environments that support connection and shared experience, • Kavod (Respect): Maintaining facilities that honor the dignity of members, staff, and guests, • Hachnasat Orchim (Welcoming + Belonging): Ensuring spaces are inviting, accessible, and inclusive, • Shmirat HaGuf (Well-being): Supporting health, safety, and wellness through high-quality facilities, • Chesed (Compassion): Leading with care, patience, and humanity in both people management and decision-making JOB SUMMARY Lead the evening crew and perform cleaning tasks alongside the team to ensure the facility is clean and sanitized for all our members, guests and staff. Responsible for safety and security for nightly building closure. ESSENTIAL FUNCTIONS • Lead, train, and coach the Housekeeping Team to foster teamwork and ensure completion of scheduled tasks., • Perform hands-on cleaning as needed; coordinate coverage for staff absences and support special events, including restroom sanitation, floor care (sweeping, mopping, vacuuming, scrubbing), trash removal, and cleaning mirrors and windows., • Conduct new-hire orientation and ongoing in‑service training, explaining policies and procedures and demonstrating safe operation and maintenance of equipment such as floor scrubbers, buffers, carpet shampooers, air compressors, chemical dispensers, and pressure sprayers., • Maintain daily cleaning logs to track completed tasks and areas requiring attention., • Ensure building security during evening hours and at close by verifying that all areas are vacated and doors are secured., • Enforce consistent adherence to safety policies, housekeeping standards, and proper work practices., • Support implementation of cleaning routes and duty lists to monitor productivity and workflow., • Partner with the Housekeeping Manager to assign staff duties and ensure adequate coverage., • Proactively assess work areas for safety concerns and follow established procedures for reporting staff injuries., • Respond promptly and professionally to requests and concerns from leadership, colleagues, members, and partners., • Ensure compliance with supply control guidelines and proper training in the safe use and handling of all cleaning chemicals., • Maintain open, consistent communication to effectively direct assignments and address team concerns., • Collaborate with the Housekeeping Manager to ensure individual performance standards are met and addressed when necessary. OTHER DUTIES • Performs all duties as assigned. EDUCATION & EXPERIENCE • High School diploma or GED required., • 2 plus years’ experience in housekeeping preferred, • 1 plus years’ experience as a lead preferred. KNOWLEDGE, SKILLS & ABILITIES • Dependable, • Strong communication skills with the ability to coach, mentor, and engage team members, • Proficient in reading and understanding Material Safety Data Sheets (MSDS/SDS), • Demonstrates a strong work ethic, leading by example to promote teamwork and accountability, • Highly detail‑oriented with a keen eye for cleanliness and thoroughness, • Well‑developed organizational and problem‑solving skills, • Safety‑ and security‑focused with a proactive approach to risk prevention PHYSICAL DEMANDS & WORK ENVIRONMENT The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions. Physical Demands • Regularly standing, walking, bending, reaching with hands and arms, grasping and twisting, climbing and balancing – moving continually while cleaning;, • Regularly stooping, kneeling, crouching or crawling;, • Regularly lift or carry up to 20 lbs.;, • Regularly walk up and down flights of stairs;, • Regularly use computer and keyboard, • Occasionally lift, carry and/or move over 50 pounds., • Occasionally work long hours; ability to work standing, walking, moving for long periods of time., • Occasional use of ladders Work Environment • Regularly exposed to inclement weather conditions, extreme heat, extreme cold, i.e., shovelling snow; salting snow/ice; washing windows, picking up trash, emptying garbage, • Working near moving mechanical parts, • Risk of electrical shock, fumes and cleaning chemicals, • Regularly exposed to dust and dirty surfaces, • Must handle various cleaning solvents, chemicals, etc., • Normal office environment Mon and Fri 8am to 430pm Sat and Sun Weekends- 12pm-8pm

Job Description Location: Buffalo, NY and Rochester, NY Service Areas Job Title: HVAC Install Technician Our company is looking for an experienced HVAC Installation Technician to join our growing team! People often come to us looking for a job, but they stay with us because they find a fulfilling career, room to grow, and opportunities to excel. Responsibilities and Expectations You will install residential heating and cooling systems, ensuring all installations meet high quality, safety, and code standards while delivering an excellent customer experience. Key Tasks • Install residential HVAC systems including furnaces, air conditioners, heat pumps, and mini-splits., • Replace old or inefficient systems with new energy-efficient models., • Fabricate, assemble, and install ductwork and piping as required., • Test and verify system performance, airflow, and calibration., • Review completed installations with homeowners and provide system operation instructions., • Maintain compliance with building codes, manufacturer specifications, and safety standards., • Collaborate with team members to ensure timely completion of projects., • Maintain organized tools, materials, and company vehicles. Requirements • Experience in residential HVAC installation with a minimum of 2–5+ years required., • Strong mechanical and electrical aptitude., • Ability to read and interpret blueprints and wiring diagrams., • Attention to detail and commitment to quality workmanship., • EPA Section 608 Certification., • Valid driver's license and clean driving record., • Experience utilizing Service Titan highly preferred. What Can We Do for You? • Competitive pay – Ranging from $20-$40/hr. with opportunities for commission based on experience and performance., • Benefits – we offer medical insurance with employer contribution, dental insurance, vision insurance, life insurance, short-term disability, and other additional supplemental insurances., • Earned Time Off., • Paid Holidays., • 401k Plan with company match, • On-the-job training., • Company supplied vehicle., • New company supplied iPad & access to integrated software., • State of the art parts and supplies. The compensation for this position is expected to range between $20.00 - $40.00 per hour. This range is a good-faith estimate, based on the qualifications necessary for the position, including experience, training, and other considerations permitted by law. Factors that may be used when making an offer may include a candidate's skills, experience, the expected quality and quantity of work, and internal pay alignment, as needed. We are an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, sexual orientation, gender identity or any other characteristic protected by law. Employee(s) will be required to follow any other job-related instructions and to perform any other job-related duties requested by any person authorized to give instructions or assignments.

Job DescriptionDescription: General Job Summary: Responsible for assembly/packing of sheet metal components of small or medium sized parts, fitting and/or adjustment of inter-related parts and/or assembly based on written specifications. Essential Duties and Responsibilities: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individual with disabilities to perform the essential job functions. • Follows all safety processes and procedures in accordance with job and Company requirements., • Following specific written instructions and/or blueprints, assembles components into finished product., • Disassembles and re-builds products per specifications., • Conducts quality checks following quality process instructions., • Pack and labels product following packaging instructions., • Ensures that the work area is clean, orderly, and safe., • Work in packaging as needed, including packing large assemblies or parts., • Inspect parts for defects or damage prior to packing., • Make boxes, apply labels, verify counts, and follow packing instructions., • Follow directions on packing from Packaging Lead., • Assists with other duties as assigned by supervisor/manager. Supervisory Responsibilities: None Requirements: Education High school diploma or general education degree (GED) Experience 2-4 years related experience or training or equivalent combination of education and experience. Other Requirements: Additional mechanical training and/or blueprint reading a plus. Ability to use hand tools such as screw drivers, sockets, Allen wrench, air drivers, tape dispenser and material handling equipment such as tow motor. Ability to read and understand blueprints, quality and packing instructions. Computer Skills: None required. Language Skills: Intermediate Skills: Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers or Associates of organization. Mathematical Skills: Basic Skills: Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate. Reasoning Ability: Intermediate Skills: Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. Physical Demands: The physical demands described here are representative of those that must be met by an Associate to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job the Associate is regularly required to sit; walk, stand for extensive periods of time, maneuver through the office and factory; use hands to finger, handle, or feel; reach with hands and arms; grasp and twist; talk or hear; and lift and/or or move equipment/product weighing up to 50 pounds. Utilize lift assist or work with another associate to lift anything greater than 50Ilbs. Must pass physical abilities test because of weight of assemblies being worked on. Work Environment: The work environment characteristics described here are representative of those an Associate encounter while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform within the described work environment. The work environment may include humid conditions and extreme heat and cold. While performing the duties of this job the noise level in the work environment is usually loud.

Job Description Location: Rochester, NY Service Area Job Title: HVAC Service & Maintenance Technician Our company is looking for an experienced HVAC Service & Maintenance Technician to join our growing team! People often come to us looking for a job, but they stay with us because they find a fulfilling career, room to grow, and opportunities to excel. Responsibilities and Expectations You will diagnose, repair, and maintain residential heating and cooling systems while ensuring our customers' homes remain comfortable and energy efficient. Key Tasks • Inspect, diagnose, and repair residential HVAC systems including furnaces, air conditioners, heat pumps, and thermostats., • Perform scheduled maintenance, tune-ups, and system performance checks., • Identify and communicate repair and replacement options to homeowners., • Respond to service calls promptly, providing courteous and efficient solutions., • Accurately document all service activities and customer interactions., • Educate homeowners on proper system care and energy efficiency practices., • Maintain company tools, vehicles, and equipment in clean and safe condition., • Adhere to all company, safety, and industry standards. Requirements • Prior Residential and Commercial HVAC experience with a minimum of 2 years residential., • Experience utilizing Service Titan highly preferred., • Effective communication and customer service skills., • Strong diagnostic and problem-solving abilities., • Ability to work independently and as part of a team., • Attention to detail and organizational skills., • EPA Section 608 Certification (if applicable)., • Valid driver's license with a clean driving record. What Can We Do for You? • Competitive pay – Ranging from $25-$35/hr. with opportunities for uncapped commission based on experience and performance., • Benefits – we offer medical insurance with employer contribution, dental insurance, vision insurance, life insurance, short-term disability, and other additional supplemental insurances., • Earned Time Off., • Paid Holidays., • 401k Plan with Company Match., • On-the-job training., • Company supplied vehicle., • New company supplied iPad & access to integrated software., • State of the art parts and supplies. The compensation for this position is expected to range between $25.00 - $35.00 per hour. This range is a good-faith estimate, based on the qualifications necessary for the position, including experience, training, and other considerations permitted by law. Factors that may be used when making an offer may include a candidate's skills, experience, the expected quality and quantity of work, and internal pay alignment, as needed. We are an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, sexual orientation, gender identity or any other characteristic protected by law. Employee(s) will be required to follow any other job-related instructions and to perform any other job-related duties requested by any person authorized to give instructions or assignments.

Job DescriptionJob Description: Isaac Heating & Air Conditioning is currently in search of an experienced Commercial HVAC Service Technician for their Rochester, NY team. In this role, you will service all equipment according to an established service schedule and troubleshoot and rectify any potential problems for all our clients. The perfect candidate should have a strong commitment to continuous learning and skill enhancement, this is a great opportunity for someone looking to advance their career in the HVAC industry. Summary: For over 75 years, Isaac Heating and Air Conditioning has worked diligently to meet the changing heating and air conditioning needs of homeowners and businesses in Upstate and Central New York. Isaac is one of the nation's largest privately held HVAC/R contractors and services over 35,000 clients a year. Creating an enjoyable experience met with anticipation results in an environment where our team, clients, and community can comfortably grow, prosper, succeed, and improve their quality of life. Isaac partners with leading HVAC and plumbing companies throughout the United States, providing the support and resources of a large national company. Responsibilities: • Manage and prioritize part installs, quoted repairs, and servicing of clients HVAC systems, • Partner with business owners to educate, build relationships, and understand and address their HVAC needs, • Responsible for accurately documenting all work completed according to company policy, • Builds and maintains customer relations in the field to ensure excellent customer service, • Accountable for following all company safety procedures, • Maintain up-to-date product knowledge Job Qualifications: • High school diploma or equivalent required, • 5+ years of commercial HVAC experience preferred, • EPA – Universal Certification preferred, • Valid driver’s license / clean driving record required, • OSHA 10-hour Construction Course preferred Competencies: • Excellent written, verbal, and active listening skills, • Exceptional customer service skills, • Ability to lift and move up to 50 pounds, • Technical knowledge, • Strong organizational skills, • Ability to work individually and as part of a team, • Customer focused, • Problem-solving skills What can we offer you? • Medical, dental, and vision insurance, • 401k with company match, • Competitive base pay, • Company vehicle, • Tool allowance, • Company provided cellphone, tablet, • Room for Advancement, • Continuing Education The starting base range for this position is $32 to $38 per hour. This is the range of the base pay only, it does not include other components that make up the total compensation package of the position. If offered a position, your total compensation package will be determined by experience, location, skills, and/or education which may result in a total compensation package that falls outside of the provided range. This employer participates in E-Verify to verify the employment eligibility of all new hires. E-Verify is a federal program that compares information from Form I-9 to government records to confirm employment eligibility. Isaac Heating & Air Conditioning (subsidiaries and affiliates) is an Equal Opportunity Employer committed to diversity and inclusion in the workplace. All qualified applicants will receive consideration for employment without regard to sex, race, color, age, national origin, religion, physical and mental disability, genetic information, marital status, sexual orientation, gender identity/assignment, citizenship, pregnancy, or maternity, protected veteran status, or any other status prohibited by applicable national, federal, state, or local law.

Job DescriptionBenefits: • 401(k) matching, • Bonus based on performance, • Health insurance, • Paid time off, • Training & development Cleaning & Restoration Technician Build With Us From Day One Voda Cleaning & Restoration of Rochester, NY Build Something From Day One Were launching a new restoration company in Rochester backed by the national brand of Voda Cleaning & Restoration, and were looking for motivated, hardworking technicians to help build the company from the ground up. This is an opportunity to join at the ground level and grow with the company as we scale. Youll work directly with ownership, gain hands-on experience across multiple areas of the restoration and cleaning industry, and have the opportunity to advance quickly into specialized restoration roles. This is a hands-on field position. Youll be actively working on job sites daily helping customers through water, mold, fire/smoke, and specialty cleaning situations. What Were Looking For • Positive attitude and strong work ethic, • Reliable, accountable, and team-oriented, • Comfortable with physical labor and active workdays, • Willingness to learn and grow in the restoration industry, • Comfortable working in customer-facing environments, • Basic comfort with technology, mobile apps, and documentation, • Ability to lift equipment and work in varying job site conditions, • Valid NYS drivers license required, • Background checkPreferred (Not Required), • 1+ year of cleaning, restoration, construction, flooring, demolition, moving, maintenance, or other hands-on labor experience, • IICRC Certifications (CCT, WRT, etc.), • Experience with carpet cleaning, floor cleaning, tile & grout cleaning, upholstery cleaning, air duct cleaning, or restoration work Startup Environment / Flexibility Expectations This is a full-time, guaranteed 40-hour-per-week position. As a startup operation, flexibility and a team-first mentality are extremely important during the early growth phase. In addition to restoration work, technicians may assist with carpet cleaning, tile & grout cleaning, contents work, warehouse organization, equipment setup, vehicle organization, and other operational needs as the company grows. Were looking for people who want to help build something - not just clock in and out. Opportunities to Advance Into • Water Damage Restoration Technician (WRT), • Applied Microbial Remediation Technician (AMRT), • Applied Structural Drying Technician (ASD), • Fire & Smoke Restoration Technician (FSRT), • Mold Remediation Specialist (MRS), • Trauma clean up (TCST)Paid training and certifications provided for the right candidate. Rewards & Benefits • Competitive Hourly Pay + Overtime, • Paid IICRC Certifications & Training, • Health Benefit Options, • 401(k) Matching, • PTO, • After-hours call-out opportunities, • Company-provided equipment and uniforms, • Work directly with ownership, • Small team, high standards, growth-focused culture Responsibilities • Assist with water, mold, fire/smoke, and specialty cleaning jobs, • Perform carpet, floor, upholstery, and tile cleaning services, • Set up and monitor drying equipment, • Handle demolition and cleanup tasks as needed, • Take job site photos and complete documentation, • Maintain vehicles, tools, and equipment, • Communicate professionally with customers, • Help maintain warehouse organization and inventory, • Follow company safety and operational standards How We Operate: Speed. Quality. Professionalism. Team First. Safety. This is a great opportunity for someone looking to get into the restoration industry, learn valuable skills, and grow with a company from the very beginning. Apply now and help us build something great from day one.

Job Description Cannon Industries A global company with headquarters in Rochester, New York, Cannon Industries has grown to become one of the leading sheet metal and custom weld fabricators in the contract manufacturing industry. Our quality standards are unsurpassed in the industry because we know that our customers’ standards grow with each passing year. Computer controlled processes, operators and technicians with decades of experience, and strict procedures for quality control have led Cannon Industries to step ahead of the competition, by earning QS:9000, ISO:9002, and TS:16949 certifications. Cannon Industries, Inc. is a drug, smoke and alcohol-free working environment. General Job Description: Repairs and maintains machinery and mechanical equipment, such as motors, pumps, conveyors, belts, fans, air conditioners, etc. Examines mechanical equipment to diagnose trouble. Disassembles machines and repairs or replaces broken parts. Adjusts functional parts of mechanical devices as necessary. Cleans and lubricates parts. Order replacement parts. Inspects completed repairs. Performs all work in accordance with established safety procedures. Requisitions new parts and equipment. Minimum Qualifications: • Knowledge of manufacturing machinery, • High school diploma or equivalent, • Five or more years related experience, • Hands-on knowledge of the mechanics of manufacturing equipment, • Extensive knowledge of electrical wiring, circuits, etc., • Must supply own tools Physical Demands: • Must be able to lift up to 50 lbs. regularly, • Requires frequent bending, stooping, squatting, pushing and pulling of parts and part containers, • May be required to stand for long periods of time, • May involve some repetitive motions, • Due to open environment of the warehouse, must be able to work in various weather and temperature conditions to include extreme heat, humidity and cold Specific Duties: • Troubleshoot manufacturing equipment, diagnosing mechanical problems and determine how to correct them, • Perform preventative maintenance on all building machinery and equipment, • Inspect, maintain and perform primary repair of mechanical equipment, • Perform re-wiring of building, light fixture, and equipment, • Coordinates and executes facility and ground maintenance requirements as needed, • Establish and maintain maintenance records for equipment and facility, • During winter months shovel and apply salt on sidewalks at all entrance points of the facility, • Coordinate with purchasing to order supplies and equipment when required to maintain operation of manufacturing facility and grounds, • Assist purchasing with scheduling help for outside vendors as needed, • Ability to communicate requirements to supervisors and also be independent to complete tasks with hardly any supervision, • Keep the building and the equipment in compliance with OSHA regulations, • Ability to work and act in a professional manner as all times, • Maintain good housekeeping practices throughout the facilities This list of duties and responsibilities is not intended to be all-inclusive and may be expanded to include other duties and responsibilities as it may be deemed necessary. Benefits • 401(k), • Health Insurance, • Paid time off, • Vision Insurance, • Dental Insurance, • Life Insurance

Job DescriptionDescriptionPosition Overview Kennedy Mechanical is a well-established company committed to quality workmanship, customer satisfaction, and employee development! We are seeking a skilled and dependable HVAC Installer to join our team due to growth. We provide challenging and consistent year-round work, the opportunity for advancement, training, and a safe work environment. We offer competitive pay (based on experience), paid holidays, paid time off, and industry leading benefits. Responsibilities • Perform installation of HVAC related equipment, • Carry out wiring of both low and line voltage to cooling and heating equipment, • Read and interpret blueprints, schematics, and installation manuals, • Ensure proper sizing, placement, and setup of equipment, • Perform installation of copper refrigerant lines to air conditioning units, including brazing and soldering, • Perform installation of flex and sheet metal duct systems in light commercial and residential buildings, • Fabricate/ connection of gas lines to heating equipment, • Provide necessary support to other team members to be able to complete tasks on time, • Create and maintain cordial and collaborative working relationships, • Follow all safety procedures and company policies Qualifications • 2+ years of HVAC Installation experience preferred, • Possess effective verbal and written communication skills, • Must have an honest and dependable personality, • Strong mechanical aptitude and problem-solving skills, • Strong ability to distinguish between various HVAC equipment, • Self-motivated individual with strong ability to follow instructions and work alone, as well as work effectively within a team, • Ability to lift items weighing 50+ pounds safely, • Ability to climb ladders, stoop, balance, crouch, crawl, or/and kneel continually Benefits • Competitive pay based on experience, • Health, dental, and vision insurance, • 401(k) with company match, • Paid time off (PTO) and paid holidays, • Company paid short- and long-term disability, • Company paid life insurance, • Company vehicle (for applicable roles), • Supportive team environment and strong safety culture

Job DescriptionJob Description: Isaac Heating & Air Conditioning is currently in search of an entry-level Residential HVAC Installer to join their Rochester, NY team. The ideal candidate for this position possesses a strong willingness to learn and grow, with a genuine desire to continue learning the skills necessary to become a proficient and highly effective Residential Installer. Summary: For over 75 years, Isaac Heating and Air Conditioning has worked diligently to meet the changing heating and air conditioning needs of homeowners and businesses in Upstate and Central New York. Isaac is one of the nation's largest privately held HVAC/R contractors and services over 35,000 clients a year. Creating an enjoyable experience met with anticipation results in an environment where our team, clients, and community can comfortably grow, prosper, succeed, and improve their quality of life. Isaac partners with leading HVAC and plumbing companies throughout the United States, providing the support and resources of a large national company. Responsibilities: • Perform installation of furnaces, heat pumps, AC units, water heaters etc. for Residential clients., • Interact with homeowners to educate, build relationships, and understand and address their HVAC concerns., • Develop basic knowledge of residential and mechanical piping and ductwork., • Ensure the HVAC equipment that was installed is clean, safe, and up to high standards before departure., • Safely operate hand tools, power tools, generators, and other equipment as required by the job. Job Qualifications: • High School diploma or equivalent required, • OSHA 10-hour Certificate and/or EPA Universal preferred, • Education/course work in HVAC preferred, • Valid driver’s license with an acceptable driving record required Competencies: • Excellent written, verbal, and active listening skills, • Exceptional customer service skills, • Technical knowledge, • Strong organizational skills, • Ability to work individually and as part of a team, • Customer focused, • Problem-solving skills What can we offer you? • Competitive base pay, • Comprehensive Medical, Dental, and Vision insurance, • Paid vacation and sick time, • 401k Retirement Plan with Company Match, • Tool and Uniform Allowances The starting base range for this position is $18.50 to $20.00 per hour. This is the range of the base pay only, it does not include other components that make up the total compensation package of the position. If offered a position, your total compensation package will be determined by experience, location, skills, and/or education which may result in a total compensation package that falls outside of the provided range. This employer participates in E-Verify to verify the employment eligibility of all new hires. E-Verify is a federal program that compares information from Form I-9 to government records to confirm employment eligibility. Isaac Heating & Air Conditioning (subsidiaries and affiliates) is an Equal Opportunity Employer committed to diversity and inclusion in the workplace. All qualified applicants will receive consideration for employment without regard to sex, race, color, age, national origin, religion, physical and mental disability, genetic information, marital status, sexual orientation, gender identity/assignment, citizenship, pregnancy, or maternity, protected veteran status, or any other status prohibited by applicable national, federal, state or location

Job DescriptionJob Description: Isaac Heating & Air Conditioning is currently in search of an experienced Residential HVAC Installer to join their Rochester, NY Team. The ideal candidate for this position possesses a strong willingness to learn and grow, with a genuine desire to continue learning the skills necessary to become a proficient and highly effective Residential Installer. Summary: For over 75 years, Isaac Heating and Air Conditioning has worked diligently to meet the changing heating and air conditioning needs of homeowners and businesses in Upstate and Central New York. Isaac is one of the nation's largest privately held HVAC/R contractors and services over 35,000 clients a year. Creating an enjoyable experience met with anticipation results in an environment where our team, clients, and community can comfortably grow, prosper, succeed, and improve their quality of life. Isaac partners with leading HVAC and plumbing companies throughout the United States, providing the support and resources of a large national company. Responsibilities: • Perform installation of residential HVAC, including Water heaters, PV Water Heaters, Humidifiers, Dryer Vents, and Dehumidifiers., • Interact with homeowners to educate, build relationships, and understand and address their HVAC concerns., • Develop basic knowledge of residential and mechanical piping and ductwork., • Ensure the HVAC equipment that was installed is clean, safe, and up to high standards before departure., • Safely operate hand tools, power tools, generators, and other equipment as required by the job. Job Qualifications: • High School diploma or equivalent required, • OSHA 10-hour Certificate preferred, • EPA Universal Certification preferred, • 2-5+ years of HVAC experience, • Valid driver’s license with an acceptable driving record Competencies: • Excellent written, verbal, and active listening skills, • Exceptional customer service skills, • Technical knowledge, • Strong organizational skills, • Ability to work individually and as part of a team, • Customer focused, • Problem-solving skills What can we offer you? • Competitive base pay, • Comprehensive Medical, Dental, and Vision insurance, • Paid vacation and sick time, • 401k Retirement Plan with Company Match, • Tool and Uniform Allowances The starting base range for this position is $21.00 to $30.00 per hour. This is the range of the base pay only, it does not include other components that make up the total compensation package of the position. If offered a position, your total compensation package will be determined by experience, location, skills, and/or education which may result in a total compensation package that falls outside of the provided range. This employer participates in E-Verify to verify the employment eligibility of all new hires. E-Verify is a federal program that compares information from Form I-9 to government records to confirm employment eligibility. Isaac Heating & Air Conditioning (subsidiaries and affiliates) is an Equal Opportunity Employer committed to diversity and inclusion in the workplace. All qualified applicants will receive consideration for employment without regard to sex, race, color, age, national origin, religion, physical and mental disability, genetic information, marital status, sexual orientation, gender identity/assignment, citizenship, pregnancy, or maternity, protected veteran status, or any other status prohibited by applicable national, federal, state or location

Job DescriptionMechanical Systems Maintenance Specialist — Aerospace Where: Rochester, New York | Shift: A Shift | Pay: $25–$38/hour, commensurate with experience Opportunity via TekPro — direct recruitment partner to top aerospace manufacturers Your mission Picture this: a production line pauses for a hydraulic pressure anomaly. You trace the schematic, validate the pneumatic circuit, dial in a precise mechanical adjustment, and bring the cell back online with confidence. That’s the kind of high‑impact work you’ll do to keep a precision aerospace operation running smoothly. What you will do • Own scheduled preventive maintenance and tackle corrective repairs that restore functionality fast, • Diagnose and fix issues spanning mechanical, hydraulic, and pneumatic domains, • Safeguard equipment reliability and uptime to hit production targets, • Support new machinery installation, calibration, and alignment/adjustment, • Team up with engineering and production to ensure safe, efficient throughput, • Champion continuous improvement in maintenance practices and documentation What sets you up for success, • 2+ years of hands‑on maintenance mechanic experience in manufacturing; aerospace background ideal, • Fluency with mechanical systems, hydraulics, and pneumatics, • Confidence reading and applying technical drawings and schematics, • Sharp troubleshooting ability, attention to detail, and a safety/quality focus Why you’ll like it here, • $25–$38/hour depending on experience, • Clean, air‑conditioned, high‑precision aerospace facility, • Ample overtime potential, • Long‑term career stability with a reputable aerospace manufacturer Next steps TekPro is actively reviewing candidates for this A Shift position in Rochester, NY. Apply or message TekPro to learn more and take the next step in your maintenance career.

Job DescriptionJob Description: Isaac Heating & Air Conditioning is currently in search of an Entry-Level Commercial Service HVAC Technician for their Rochester, NY team. In this role, you will service all equipment according to an established service schedule and troubleshoot and rectify any potential problems for all our clients. The perfect candidate should have a strong commitment to continuous learning and skill enhancement, this is a great opportunity for someone looking to advance their career in the HVAC industry. Summary: For over 75 years, Isaac Heating and Air Conditioning has worked diligently to meet the changing heating and air conditioning needs of homeowners and businesses in Upstate and Central New York. Isaac is one of the nation's largest privately held HVAC/R contractors and services over 35,000 clients a year. Creating an enjoyable experience met with anticipation results in an environment where our team, clients, and community can comfortably grow, prosper, succeed, and improve their quality of life. Isaac partners with leading HVAC and plumbing companies throughout the United States, providing the support and resources of a large national company. Responsibilities: • Manage and prioritize part installs, quoted repairs, and servicing of clients HVAC systems, • Partner with business owners to educate, build relationships, and understand and address their HVAC needs, • Responsible for accurately documenting all work completed according to company policy, • Builds and maintains customer relations in the field to ensure excellent customer service, • Accountable for following all company safety procedures, • Maintain up-to-date product knowledge Job Qualifications: • High school diploma or equivalent required, • EPA – Universal Certification preferred, • Valid driver’s license / clean driving record, • OSHA 10-hour Construction Course preferred Competencies: • Excellent written, verbal, and active listening skills, • Exceptional customer service skills, • Ability to lift and move up to 50 pounds, • Technical knowledge, • Strong organizational skills, • Ability to work individually and as part of a team, • Customer focused, • Problem-solving skills What can we offer you? • Competitive base pay, • Medical, dental, and vision insurance, • 401k retirement plan with company match, • Paid vacation and sick time, • Annual tool and uniform allowances The starting base range for this position is $18.50 to $22 per hour. This is the range of the base pay only, it does not include other components that make up the total compensation package of the position. If offered a position, your total compensation package will be determined by experience, location, skills, and/or education which may result in a total compensation package that falls outside of the provided range. This employer participates in E-Verify to verify the employment eligibility of all new hires. E-Verify is a federal program that compares information from Form I-9 to government records to confirm employment eligibility. Isaac Heating & Air Conditioning (subsidiaries and affiliates) is an Equal Opportunity Employer committed to diversity and inclusion in the workplace. All qualified applicants will receive consideration for employment without regard to sex, race, color, age, national origin, religion, physical and mental disability, genetic information, marital status, sexual orientation, gender identity/assignment, citizenship, pregnancy, or maternity, protected veteran status, or any other status prohibited by applicable national, federal, state, or local law.

Job DescriptionJob Description: Isaac Heating & Air Conditioning is seeking an experienced Residential HVAC Service Technician for their Rochester, NY location. The ideal candidate will already have HVAC work experience and be able to perform repair/maintenance work in a thorough and accurate manner. Summary: For over 75 years, Isaac Heating and Air Conditioning has worked diligently to meet the changing heating and air conditioning needs of homeowners and businesses in Upstate and Central New York. Isaac is one of the nation's largest privately held HVAC/R contractors and services over 35,000 clients a year. Creating an enjoyable experience met with anticipation results in an environment where our team, clients, and community can comfortably grow, prosper, succeed, and improve their quality of life. Isaac partners with leading HVAC and plumbing companies throughout the United States, providing the support and resources of a large national company. Responsibilities: • Services all equipment according to an established service schedule, and company standards and within acceptable time frames as well as troubleshoot and rectify potential problems on location, • Interact with homeowners to educate, build relationships, and understand and address their HVAC concerns, • Documents legibly and accurately all work completed according to company policy and submits on a daily basis, • Builds and maintains customer relations in the field to ensure excellent customer service and enhance the company's image, • Follows all safety procedures, including following all safe driving habits and not utilizing mobile devices in vehicles, • Applies knowledge of products and seeks additional training/education as appropriate Job Qualifications: • High school diploma or equivalent required, • EPA – Universal Certification preferred, • Valid driver’s license / clean driving record, • OSHA 10-hour Construction Course preferred, • Ability to lift and move up to 50 pounds, • 2-5 years of HVAC Experience preferred Competencies: • Excellent written, verbal, and active listening skills, • Exceptional customer service skills, • Technical knowledge, • Strong organizational skills, • Ability to work individually and as part of a team, • Customer focused, • Problem-solving skills What can we offer you? • Competitive base pay, • Medical, Dental, and Vision insurance, • 401k Retirement Plan with Company Match, • Paid Vacation and Sick Time, • Annual Tool and Uniform Allowances The starting hourly base wage for this position is $25-$35. This is the range of the base pay only, it does not include other components that make up the total compensation package of the position. If offered a position, your total compensation package will be determined by experience, location, skills, and/or education which may result in a total compensation package that falls outside of the provided range. This employer participates in E-Verify to verify the employment eligibility of all new hires. E-Verify is a federal program that compares information from Form I-9 to government records to confirm employment eligibility. Isaac Heating & Air Conditioning (subsidiaries and affiliates) is an Equal Opportunity Employer committed to diversity and inclusion in the workplace. All qualified applicants will receive consideration for employment without regard to sex, race, color, age, national origin, religion, physical and mental disability, genetic information, marital status, sexual orientation, gender identity/assignment, citizenship, pregnancy, or maternity, protected veteran status, or any other status prohibited by applicable national, federal, state, or local law.

Job DescriptionDescription: WeTheHobby is a thriving sports entertainment company with global reach, headquartered in Rochester, NY. We value creativity, diversity, innovation, dedication, and our community! Our work environment includes: • Modern office setting, • Strong growth opportunities, • Flexible working hours, • Lively atmosphere, • A team that cares about one another, • Welcoming and inclusive culture We’re looking for an enthusiastic On-Air Personality – Entertainment to become the face of our live entertainment and collectibles streams. If you’re a natural entertainer with a love for pop culture and a flair for live streaming, this role is your chance to combine passion with performance. As part of our growing team, you’ll host interactive live streams, showcase high-demand entertainment products, and connect with an engaged audience of fans and collectors. You’ll also play a key role in representing WeTheHobby at industry events and helping build our digital presence. What You’ll Do: • Go Live with Confidence: Host exciting live-streamed shows featuring entertainment collectibles and products, delivering energy and personality to captivate viewers., • Engage with Fans: Create a welcoming and interactive atmosphere, responding to audience questions and building strong relationships with fans of entertainment franchises and creators., • Showcase Products: Promote current and upcoming products across categories including: Stranger Things, Disney, Marvel, Star Trek, Star Wars, SpongeBob SquarePants, Dune, VeeFriends, Labubu, UFC, WWE, and Minecraft, emphasizing their value to both seasoned collectors and new fans., • Maintain Card Integrity: Carefully handle and organize cards during live sessions, ensuring quality and accuracy for customers., • Build the Brand: Collaborate with our marketing team to generate engaging social media content and expand WeTheHobby’s reach within entertainment and pop-culture communities., • Attend Industry Events: Represent the brand at card shows and community events, connecting with collectors and partners., • Innovate the Experience: Continuously improve how we engage, entertain, and grow our fanbase through feedback and creativity, • Build the Brand: Collaborate with our marketing team to generate engaging social media content and expand WeTheHobby’s reach within entertainment and pop-culture communities., • Attend Industry Events: Represent the brand at card shows and community events, connecting with collectors and partners., • Innovate the Experience: Continuously improve how we engage, entertain, and grow our fanbase through feedback and creativity.Requirements: What We’re Looking For: • Passion for Entertainment & Collectibles: A genuine enthusiasm for pop culture, entertainment franchises, creators, and collectible products., • Natural Performer: Comfortable in front of a camera, with a lively and engaging personality., • Live-Streaming Know-How: Familiarity with platforms like Fanatics Live and Whatnot, plus experience using streaming equipment., • Attention to Detail: Organized and meticulous with card handling, sorting, and shipment preparation., • Exceptional Communication: Clear, charismatic, and personable verbal skills to educate and entertain simultaneously., • Adaptability & Drive: Willingness to work evenings, weekends, and in a fast-paced, evolving environment. Why Join WeTheHobby? • Exciting Growth: Be part of a rapidly growing company in an exploding market., • Competitive Pay: Salary, plus per-show commissions, • Benefits: Comprehensive health insurance, paid time off, and more!, • Dynamic Team: Work with a passionate, supportive, and innovative group., • Unique Opportunities: Build your personal brand while representing a leading name in sports collectibles. Physical Requirements: While this is primarily a desk-based role, the employee must be able to: • Sit or stand at a workstation for extended periods of time, • Occasionally bend, stoop, or ascend stairs in an office environment, • Lift and carry items such as laptops, monitors, and small office equipment weighing up to 50 pounds, • Navigate a typical office setting, including attending in-person meetings or collaborating across departments In accordance with applicable Federal and State laws, the anticipated pre-commission salary for this position based upon location in Rochester, NY, and experience is $60,000 annually. On-Air Personalities earn on average combined total compensation of $75k - $110k annually To comply with Federal law, WeTheHobby participates in E-Verify. All newly hired employees are verified through this electronic system established by the Department of Homeland Security (DHS) and the Social Security Administration (SSA) to confirm their identity and employment eligibility.

L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers' mission and quest for professional growth. L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do. L3Harris is the Trusted Disruptor in defense tech. With customers' mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security. Job Title: Buyer/ Procurement Specialist - Government & Commercial Programs Job Code: 37570 Job Location: Rochester, NY Job Schedule: 9/80 Job Description: Join a team that's powering the future of technology and defense! At L3Harris, we're looking for a driven and detail-oriented Buyer to help us strategically source the materials and services that keep our government and commercial programs running at the highest level. If you're passionate about building strong supplier relationships, negotiating great deals, and making a real impact, we want to hear from you! Essential Functions: \n • Source and procure a wide range of materials and services-including electronics, cables, chemicals, software, hardware, and more-for high-impact government and commercial projects. \n, • Lead the end-to-end RFQ/RFP process: develop requirements, negotiate agreements, and manage contracts for both routine and complex sourcing needs. \n, • Evaluate supplier bids to ensure the best value for L3Harris, balancing price, quality, delivery, and service. \n, • Serve as the primary point of contact for key suppliers, building long-term partnerships and driving continuous improvement. \n, • Interpret and apply government regulations (FAR/DFAR/ITAR) related to import/export controls and certifications. \n, • Track and manage purchase orders, resolve discrepancies, and collaborate with receiving and accounting teams to ensure smooth operations. \n, • Provide timely updates to program teams and ensure all orders are completed accurately and on schedule. \n, • Analyze and solve complex procurement challenges, using data to drive decisions and improve processes. \n, • Work closely with manufacturing, engineering, and program management teams to anticipate needs and mitigate risks for critical components. \n, • Participate in cross-functional projects and contribute to a culture of innovation and excellence. \n\n Qualifications: • Bachelor's Degree and minimum 4 years of prior relevant experience. Graduate Degree and a minimum of 2 years of prior related experience. In lieu of a degree, minimum of 8 years of prior related experience. \n Preferred Additional Skills: \n • Experience with government procurement regulations (FAR/DFAR/ITAR). \n, • Familiarity with various production and manufacturing processes. \n\n\n, • Previous experience in a high-tech, defense, or aerospace environment. Strong attention to detail, organizational skills, and a commitment to delivering high-quality work. \n, • Excellent communication and negotiation skills, with the ability to build relationships at all levels. \n, • Proficiency in Microsoft Office (Word, Excel) and comfort working with data and reports. \n, • A positive, proactive attitude and a passion for problem-solving. \n, • Ability to manage multiple priorities and drive tasks to completion. \n\n In compliance with pay transparency requirements, the salary range for this role in New York state is $63,500 - $117,500. This is not a guarantee of compensation or salary, as final offer amount may vary based on factors including but not limited to experience and geographic location. L3Harris also offers a variety of benefits, including health and disability insurance, 401(k) match, flexible spending accounts, EAP, education assistance, parental leave, paid time off, and company-paid holidays. The specific programs and options available to an employee may vary depending on date of hire, schedule type, and the applicability of collective bargaining agreements. #LI-NB1 L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law. Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information. By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions. L3Harris Technologies is an E-Verify Employer. Please click here for the E-Verify Poster in English or Spanish . For information regarding your Right To Work, please click here for English or Spanish .

A Day in Your Life at MKS: As a Production Technician at MKS, you will partner with the team to assist in the production of defraction gratings. In this role, you will report to the Supervisor. Manufacturing/Operations. You Will Make an Impact By: \n • Coating:, • Experience using Temescal/Telemark ebeam guns and sweep controllers. IC5/IC6 deposition controllers. Building/rebuilding emitter assemblies (need good manual dexterity) Ability to work in cramped or confined spaces. (coating cleans) Metrology experience with surface profilometer, spectrophotometer. Understanding / following SPC charting Lifting - heavy blanks and coating panels\n\n, • Cementing:\n, • Generating material pick lists, prepping and washing glass substrates with high level of quality and care.\n, • Identifying epoxy and cure types for a variety of products and sizes\n\n\n\n, • Take Apart:\n, • Handle multiple product sizes performing manual labeling, separation, and dicing of gratings.\n, • Perform hand trimming and successful take apart using a variety of take apart fixtures and mechanical tools.\n\n\n, • Saw:, • Loads and unloads products onto the dicing saw (1-5 lbs). Aligns the plate using white light. Runs program for requested size. Once program is complete unloads the product. Rise product off with water and blow dry using compressed air. Breaks apart diced parts and label per work instructions.\n\n \n • Layout/Inspection:, • Inspect optics to ensure customer specifications are met Accurately complete required documentation for each job processed Learn to recognize part defects\n\n, • Testing:, • Knowledge of Microsoft Excel a big plus. Knowing how to read graphs created and how to manipulate data Attention to detail is a must, verify test data is accurate, ensure (make sure the test data paperwork is correct, alignment of the instruments, &c) Some understanding of metrology equipment a plus but not necessary\n\n\n Skills you bring: \n • A minimum of one year experience in a production environment\n, • Must be able to train on first shift for approximately three months\n, • SAP Knowledge preferred\n, • Ability to read drawings and use measurement instruments\n, • Ability to read and carefully follow work instructions are a must\n, • Exceptional attention to detail and a passion for producing quality, dependable work.\n, • Experience using computer and MS Office\n, • Able to lift up to 50lbs\n\n Compensation and Benefits: Pay Range: $19-21 per hour. This range is a good faith estimate of the expected salary range for this position, based on a wide range of factors including qualifications, experience and training, operational and business needs and other considerations permitted by law. At MKS, it is not typical for an individual to be hired at or near the top of the range for the role. MKS Instruments, Inc. is an Affirmative Action and Equal Opportunity employer. We solicit and hire applicants regardless of race, color, national origin, sex, religion, age, disability, veteran status, sexual orientation, gender identity, or any other protected category. Our policy is to employ the most qualified applicants. We conduct background checks and drug screens, in accordance with company policies and federal and state guidelines. Globally, our policy is to recruit individuals from wide and diverse backgrounds. However, certain positions require access to controlled goods and technologies subject to the International Traffic in Arms Regulations (ITAR) or Export Administration Regulations (EAR). Applicants for these positions may need to be "U.S. persons." "U.S. persons" are generally defined as U.S. citizens, noncitizen nationals, lawful permanent residents (or, green card holders), individuals granted asylum, and individuals admitted as refugees. #LI-AS1 Globally, our policy is to recruit individuals from wide and diverse backgrounds. However, certain positions require access to controlled goods and technologies subject to the International Traffic in Arms Regulations (ITAR) or Export Administration Regulations (EAR). Applicants for these positions may need to be "U.S. persons." "U.S. persons" are generally defined as U.S. citizens, noncitizen nationals, lawful permanent residents (or, green card holders), individuals granted asylum, and individuals admitted as refugees. MKS Inc. and its affiliates and subsidiaries ("MKS") is an affirmative action and equal opportunity employer: diverse candidates are encouraged to apply. We win as a team and are committed to recruiting and hiring qualified applicants regardless of race, color, national origin, sex (including pregnancy and pregnancy-related conditions), religion, age, ancestry, physical or mental disability or handicap, marital status, membership in the uniformed services, veteran status, sexual orientation, gender identity or expression, genetic information, or any other category protected by applicable law. Hiring decisions are based on merit, qualifications and business needs. We conduct background checks and drug screens, in accordance with applicable law and company policies. MKS is generally only hiring candidates who reside in states where we are registered to do business. MKS is committed to working with and providing reasonable accommodations to qualified individuals with disabilities. If you need a reasonable accommodation during the application or interview process due to a disability, please contact us at: [email protected] . If applying for a specific job, please include the requisition number (ex: RXXXX), the title and location of the role

Job purpose To setup and run the Sodick Wire EDMs all the while maintaining part quality and production efficiencies. Duties and responsibilities \n • Setup, operate and debug Sodick Wire EDMs.\n, • Make machine tool offsets as needed to maintain part quality.\n, • Make minor program changes to M & G code as needed.\n, • Identifies signs of tool wear and then makes the appropriate process or tool change(s). \n, • Reads process sheets and mechanical drawings with the understanding of GD&T.\n, • Works on multiple machines and performs multiple tasks throughout the day.\n, • Uses general measuring instruments such as; indicators, micrometers, calipers, optical comparators, gage blocks, rules, protractor and height gages.\n, • Enters inspection data into a computer software program.\n, • Performs basic machine maintenance such as changing fluids and filters.\n, • Maintains a clean work environment and machine work area.\n, • Follows company written policy and documented procedures.\n, • Performs other duties as assigned.\n\n Qualifications \n • Minimum 3-5 years of experience setting up and running EDMs or minimum 3-5 years of experience setting up and running CNC Lathes and Mills or Technical Training College with the focus of study being CNC setups and operation.\n, • Ability to read blue prints and knowledge of GD&T a must.\n, • Knowledge of Esprit programs with understanding of cutting parameters.\n, • An understanding of both the Metric and English measuring systems a must.\n, • Ability to use a variety of measuring equipment.\n, • High School Diploma or Technical Training Certificate.\n\n Working conditions \n • Standard work week is Monday through Friday on B-Shift.\n, • Working in production environment.\n, • Required exposure to industrial oils, coolants, solvents, lubricants, adhesive and other chemicals. NOTE: All safety precautions will be used.\n, • Requirement for some independent actions and/or decisions is expected.\n, • Required to work in a non-air-conditioned setting.\n, • Some repetitive motion required on occasion.\n\n Physical requirements • Required daily: periodic lifting of materials and parts weighing up to 70 lbs., • Required intermittent long periods sitting and standing. Arnold Magnetic Technologies is an equal opportunity employer and does not discriminate on the basis of any legally protected status or characteristic. Minority/Female/Sexual Orientation/General Identity/Disability/Veteran #ROC B Shift: Mon-Thurs: 2:45pm-12:15am Fri: 2:45pm-6:45pm

Job purpose The primary responsibility for Machine Operator/Slicer is to attend machines while the machines slice parts. The operator is responsible for maximizing the quantity of parts while maintaining the quality of parts. Duties and responsibilities \n • Installs proper oils and coolants.\n, • Adjusts machines accordingly for quality and quantity.\n, • Removes swarfs and old coolants from machine and properly disposes of them.\n, • Changes machine oils, coolant and filters.\n, • Cleans machine and coolant tanks when necessary.\n, • Maintains tooling to perform at maximum efficiency.\n, • Maintains proper quality and quantities of manufactured materials.\n, • Operate multiple slicing machines at a time.\n, • Review Operation Sheet to assure all previous operations have been satisfactorily completed.\n, • Setup and operate the equipment in a safe and productive manner.\n, • Maintain part and identification during processing.\n, • Verify completed operations match blue prints\n, • Other duties as assigned\n\n Qualifications \n • High School Diploma/GED\n, • Able to read blueprints \n, • GD&T Training & Understanding\n, • Able to use and understand standard and metric measuring systems.\n, • Use of standard measuring tools.\n, • Able to work individually and in a team environment.\n, • Statistical Process Control (SPC) Experience beneficial.\n\n Working conditions \n • May be exposed to industrial oils, toner, coolants, solvents, lubricants, adhesive and other chemicals. NOTE: All safety precautions will be used.\n, • Plant wide climate control and air conditioning\n, • Could work in areas with excessive noise. NOTE: Ear protection available.\n\n Physical requirements \n • Could require intermittent and long periods of sitting and/or standing.\n, • Required to do repetitive work.\n, • Periodic lifting of materials not to exceed 50 pounds. \n\n Arnold Magnetic Technologies is an equal opportunity employer and does not discriminate on the basis of any legally protected status or characteristic. Minority/Female/Sexual Orientation/General Identity/Disability/Veteran #ROC A Shift: Mon-Thurs: 5:30am-3:00pm Fri: 5:30am-9:30am

Job Description General Motors has a need for qualified Mechanical Journeyperson (Millwright). You will work under minimal supervision with a high level of independent judgement and problem solving. You should be flexible enough to take on and tackle multiple job assignments in a shift. Preferred Experience Includes: \n • Experience with planned maintenance systems and predictive technologies\n, • Experience with industrial robotics, automation, and conveyance systems\n\n Primary Responsibilities: \n • Follow established safety procedures according to OSHA standards and company procedures\n, • Maintain, dismantle, repair, and replace mechanical and hydraulic components (e. g. bearings, seals, details, carriers, etc.) on industrial machinery such as shafting, motors, generators, air compressors, engines, pumps, cylinders, gears, couplings, linkages, ball screws, high speed CNC spindles, coolant systems and filters, and combustion equipment and valves\n, • Layout, assemble, fabricate, maintain, and repair piping systems\n, • Use various hand or power tools for measuring, cutting, threading, grooving, bending, soldering, assembling, joining, and installing pipes, valves, and fittings\n, • Read and interpret blueprints for the mechanical operation and assembly of conveyor systems, material handling systems, robots, and other automation\n, • Operate mobile equipment (e.g. forklifts, vertical lifts, cranes)\n, • Determine loading requirements to rig equipment and material for lifting\n, • Set up and operate conventional or computer numerically controlled (CNC) machine tools such as lathes, milling machines, and grinders to cut, bore, grind, or otherwise shape parts to prescribed dimensions and finishes\n, • Fabricate punches, tools, steel rule tools and t-sets to exact specifications\n, • Plan sequences of operations for fabricating tools or assemblies using blueprints, sketches, or models\n, • Determine quality of finished products, ensuring defect-free parts, by verifying dimensions, alignment, and clearances for conformance to specifications using measuring instruments such as calipers, gauge blocks, micrometers, and dial indicators\n\n Interested individuals must meet the following minimum qualifications: \n • U.S. Department of Labor Completion of Apprenticeship Certificate in Mechanical trade (millwright, pipefitter, toolmaker, machine repair) or six (6) years of documented experience in a Mechanical trade\n, • Must be able to satisfactorily complete the General Motors hiring process requirements which include comprehensive assessments, hair drug testing, and a background check\n\n, • At least 18 years of age\n, • Eligible to work in the United States\n, • Must be willing to work flexible shift hours and day, afternoon, or night shifts as well as overtime hours daily, weekend and holidays on those shifts with little notice.\n, • GM DOES NOT PROVIDE IMMIGRATION-RELATED SPONSORSHIP FOR THIS ROLE. DO NOT APPLY FOR THIS ROLE IF YOU NEED OR WILL NEED GM IMMIGRATION SPONSORSHIP TO WORK OR TO REMAIN EMPLOYED AT GM (e.g., H-1B, TN, STEM OPT, etc.).\n, • If you are a current GM employee operating under a collective bargaining agreement, please contact your local HR/LR for employee placement opportunities.\n, • This position may be filled with a Journeyperson or Journeyperson In Training, the compensation ranges for a JIT include ($37.64- $43.91) or Journeyperson rate of $44.81. Certificates/credentials and scoring in interview will determine your status and pay.\n\n Physical Requirements \n • Quick response to safety instructions, alarms, and signals are a must\n, • Ability to work and stand for extended periods\n, • Comfortably wear personal protective equipment\n, • Navigate a busy environment\n, • Bend, twist, kneel, crouch, and reach\n, • May need to lift or carry materials weighing up to 50 lbs. depending on department\n, • Occasional sitting during certain tasks\n, • Drive mobile equipment when needed\n\n Please note - per the labor agreement between GM and the UAW, GM may share information and documentation relating to the credentials of applicants for this position (e.g., resumes, journeyperson cards, interview notes, certificates, etc.) with UAW personnel who have a need to know as part of their role on the UAW skilled trades team. About GM Our vision is a world with Zero Crashes, Zero Emissions and Zero Congestion and we embrace the responsibility to lead the change that will make our world better, safer and more equitable for all. Why Join Us We believe we all must make a choice every day - individually and collectively - to drive meaningful change through our words, our deeds and our culture. Every day, we want every employee to feel they belong to one General Motors team. Benefits Overview From day one, we're looking out for your well-being-at work and at home-so you can focus on realizing your ambitions. Learn how GM supports a rewarding career that rewards you personally by visiting Total Rewards resources. Non-Discrimination and Equal Employment Opportunities (U.S.) General Motors is committed to being a workplace that is not only free of unlawful discrimination, but one that genuinely fosters inclusion and belonging. We strongly believe that providing an inclusive workplace creates an environment in which our employees can thrive and develop better products for our customers. All employment decisions are made on a non-discriminatory basis without regard to sex, race, color, national origin, citizenship status, religion, age, disability, pregnancy or maternity status, sexual orientation, gender identity, status as a veteran or protected veteran, or any other similarly protected status in accordance with federal, state and local laws. We encourage interested candidates to review the key responsibilities and qualifications for each role and apply for any positions that match their skills and capabilities. Applicants in the recruitment process may be required, where applicable, to successfully complete a role-related assessment(s) and/or a pre-employment screening prior to beginning employment. To learn more, visit How we Hire. Accommodations General Motors offers opportunities to all job seekers including individuals with disabilities. If you need a reasonable accommodation to assist with your job search or application for employment, emailus or call us at 800-865-7580. In your email, please include a description of the specific accommodation you are requesting as well as the job title and requisition number of the position for which you are applying.

L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers' mission and quest for professional growth. L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do. L3Harris is the Trusted Disruptor in defense tech. With customers' mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security. Job Title: Production Coordinator-2nd Shift Job Code: 36079 Job Location: JROC, Rochester, NY Job Schedule: M-Th 3:30PM-2AM 2nd Shift Job Description: This role supports the production team in efficiently completing work according to the production plan while ensuring high-quality results. You will collaborate with Operations Management to follow established manufacturing standards and maintain output in line with company policies and procedures. The position also encourages team members to pursue continuous improvement within their production area using available tools and serves as a key resource or subject matter expert in assigned areas. Essential Functions: \n • Fully proficient support individual contributor. \n, • Works under limited supervision. \n, • May be a resource to other employees in areas of expertise. \n, • Assignments are moderately difficult requiring some judgment. \n, • Works to achieve operational targets within job area which has moderate impact on the overall achievement of results for the team \n, • Identifies problems and issues in straightforward situations. Resolves most issues.\n, • Communicates with contacts typically within and outside the department. \n\n Qualifications: • Requires a High School Diploma or equivalent and a minimum of 6 years of prior relevant experience or 2 years post-Secondary/Associate's Degree with a minimum of 2 years of prior related experience. \n Preferred Additional Skills: \n • Ability to understand and follow written and oral instructions \n, • Ability to follow safety practices \n, • Ability to establish and maintain cooperative working relationships with the work team and those contacted in the course of work \n, • Ability to work with management, supervisor or lead personnel to prioritize work and meet critical deadlines \n, • Prior exposure to L3Harris products. \n\n In compliance with pay transparency requirements, the salary range for this role in New York state is $41,500 - $76,500 . This is not a guarantee of compensation or salary, as final offer amount may vary based on factors including but not limited to experience and geographic location. L3Harris also offers a variety of benefits, including health and disability insurance, 401(k) match, flexible spending accounts, EAP, education assistance, parental leave, paid time off, and company-paid holidays. The specific programs and options available to an employee may vary depending on date of hire, schedule type, and the applicability of collective bargaining agreements. L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law. Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information. By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions. L3Harris Technologies is an E-Verify Employer. Please click here for the E-Verify Poster in English or Spanish . For information regarding your Right To Work, please click here for English or Spanish .

Job Description Position Type: Full-Time (Overtime & Overnight Travel Required) Job Summary We are seeking a reliable, hardworking Commercial Carpet and Tile Cleaning Technician to join our field service team. In this role, you will travel to various commercial facilities—including offices, retail spaces, schools, and medical buildings—to deliver high-quality deep cleaning services for floors, upholstery, and hard surfaces. This position is ideal for individuals who enjoy hands-on work, physical activity, and maintaining a professional presence in corporate environments. Core Responsibilities • Facility Assessment: Inspect commercial carpets, upholstery, tile, and grout to identify material composition, stain origins, and high-traffic wear patterns., • Pre-Treatment & Cleaning: Apply targeted commercial-grade stain removers, pre-sprays, and sanitizing agents. Operate truck-mounted extraction units, rotary scrubbers, and specialized hand tools., • Tile & Grout Restoration: Agitate heavy grout lines, extract embedded grime, and apply industrial-strength protective sealants to tile surfaces., • Office Furniture Handling: Safely move, protect, and reset light office furniture, chairs, and mats to ensure complete, wall-to-wall floor coverage., • Drying & Finishing: Position high-speed air movers to accelerate drying before business operations resume. Apply deodorizers and fabric protectors., • Equipment Maintenance: Clean, inspect, and maintain company vehicles, hoses, and mechanical cleaning equipment daily to ensure optimal performance., • Professional Presence: Maintain a clean uniform, neat appearance, and respectful behavior at all times while working on client properties. Requirements & Qualifications • Education: High school diploma or equivalent., • Experience: Previous commercial floor care or carpet cleaning experience is preferred, but we provide comprehensive on-the-job training for the right candidate., • Physical Ability: Physically demanding role. Must be able to lift, carry, and move heavy objects weighing up to 50 to 75 lbs, and stand, kneel, or bend for long periods., • Licensing: Valid driver's license with a clean motor vehicle record (MVR) required to drive company work vans., • Background Check: Ability to pass a mandatory criminal background check and pre-employment drug screening., • Soft Skills: Strong verbal communication, excellent time management, and a professional attitude suitable for commercial environments. Schedule & Travel Expectations • Overnight Travel: Must be willing to accommodate occasional overnight travel to reach distant commercial project sites., • Overtime: Must be available to work extended hours and overtime during our peak spring and summer busy seasons.

Voted a Rochester's Top Workplace 2021, 2022, 2023 & 2024! We are agile, professional and our goal is to provide quality service to our customers in a professional and safe work environment.Install, maintain, and repair heating, ventilation, and air conditioning (HVAC) systems.Perform routine mainte