Air quality jobs in Spring Valley, New YorkCreate job alerts

Job Description Location: Pearl River, NY Job Title: HVAC Service Technician Are you ready to roll up your sleeves and join a team that's all about your growth and success? We're not just about the job – we're about building careers that last. We're proud to be a company that values good old-fashioned hard work and the satisfaction of a job well done. We work hard but we have FUN too! As an HVAC Service Technician with us, you'll be in the thick of it, maintaining and fixing residential indoor air quality systems like a pro. From air conditioners to everything in between, you'll be the go-to expert for getting the job done right. Work for a company that is supportive, fun and wants to see you grow in your HVAC career. Responsibilities and Expectations: * Perform maintenance, and repair of residential HVAC systems, encompassing heating, cooling, and ventilation equipment. * Diagnose and troubleshoot issues with HVAC systems, pinpointing the root cause of malfunctions and proposing effective solutions. * Conduct regular inspections and preventive maintenance to uphold optimal system performance and prevent potential problems. * Install, repair, or replace various components, including compressors, motors, fans, thermostats, filters, and ductwork. * Interact with customers professionally and courteously, addressing their concerns, explaining repair options, and suggesting system improvements. * Maintain accurate documentation of service activities, detailing equipment status, repairs conducted, parts utilized, and time allocated for each job. * Remain informed about industry advancements, best practices, and emerging technologies to continually enhance technical expertise and knowledge. Requirements: * Minimum of 3-5 years of hands-on experience in HVAC systems. * Oil Burner experience highly preferred. * A valid EPA certification is ideal. * OSHA, NATE or CFC certifications are a plus. * Proficient in diagnosing and repairing residential HVAC systems with strong technical skills. * Solid knowledge of HVAC codes, regulations, and safety standards. * Excellent communication and customer service skills. * Ability to work in various settings, including attics and crawl spaces. * Physically capable of lifting 50+ pounds * Ability to work on call. What Can We Do for You? * Competitive Compensation- $35-$45/hr DOE plus commission! * Stable work environment where your growth is encouraged and supported. * Continuous and extensive training and development opportunities. * Medical, dental, and vision insurance * Long-term disability, short-term disability, and company-paid life insurance. * 401K plan with company match. * PTO and paid holidays. * Company Provided – vehicle, gas card, uniform, phone and tablet. The compensation for this position is expected to range between $35.00 - $45.00 per hour. This range is a good-faith estimate, based on the qualifications necessary for the position, including experience, training, and other considerations permitted by law. Factors that may be used when making an offer may include a candidate's skills, experience, the expected quality and quantity of work, and internal pay alignment, as needed. We are an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, sexual orientation, gender identity or any other characteristic protected by law. Employee(s) will be required to follow any other job-related instructions and to perform any other job-related duties requested by any person authorized to give instructions or assignments.

Job Description Polar Plumbing, Heating & Air Conditioning in Newburgh, NY is calling all HVAC Installation Technicians to apply to join our amazing team full-time! WHY YOU SHOULD JOIN OUR TEAM We are reputable home services company that invests in our team and offers real opportunities for growth. We pay our HVAC Installation Technicians a competitive hourly wage of $25 - $40/hour, depending on experience, plus bonuses and commissions. There is a sign-on bonus for qualified candidates with experience! Our team also enjoys top-notch benefits, including medical, dental, vision, 401(k) with match, paid time off (PTO), reimbursement for expenses, uniforms, tool allowance, company truck, and more. We also make it easy to apply with our initial quick, mobile-optimized application. If we have your attention, please continue reading to hear more about this installer position! ABOUT POLAR PLUMBING, HEATING & AIR CONDITIONING We are an award-winning, BBB-accredited company that provides first-class plumbing, heating, and air conditioning services. We offer completely transparent pricing for all our services, so our customers can be sure they're getting the absolute best value for their homes. Plumbing, heating, and cooling are some of the most important aspects of keeping a home comfortable, and we know that timing makes all the difference. That's why we are quick to respond to our customers' needs and why we offer free estimates. As a result, our customers value our honesty and trust that their homes are in the best hands. Our employees are our most valuable asset in maintaining our customers' trust. Through regular development programs, we ensure that all our employees have the training they need to succeed. We also promote an authentic team mentality and strive to make our employees feel at home in our great company culture, an environment that is more like family than work. ARE YOU A GOOD FIT? We are looking for someone who is motivated to do quality work and further their career as an HVAC Installation Technician. Ask yourself: Are you an experienced HVAC installer? Do you always put your best foot forward with a hardworking mindset? Are you career-oriented? Can you maintain a positive, can-do attitude? Is being reliable a top priority? Are you a customer service rockstar? Do you have strong communication skills? Would you like to join a growing company that is family-oriented and values its employees? If so, we want to meet you! WHAT WE NEED FROM YOU As an HVAC Installation Technician, we need you to remove and install heating and cooling systems. This installer position has a focus on residential installations and provides quality customer service. If you can do this and meet the following requirements, apply today! • Prior heating and cooling experience, • Physically able to lift 50 lbs. and perform typical tasks associated with installing heating and cooling systems Location: 12550

Job DescriptionDescription: Blend Air Mechanical, has been serving Rockland County with expert heating, cooling, and plumbing since 1984. We are looking for a Full Time HVAC Tech for our Nanuet, NY location. This offers a competitive hourly rate + sign on bonus + benefits mentioned below. Blend Air Mechanical, is part of Encon Heating & AC company. Join our team FULL TIME to handle new installations, replacements, and complex repairs. We provide complete AC unit services for both homes and businesses. Apply today and grow with us! Benefits include: • Pay Experienced HVAC technicians: Commensurate with experience $40+/hour, • $5,000 SIGN ON BONUS for eligible HVAC techs., • Quarterly discretionary bonus, • Recruiting bonus for eligible trade licenses and roles, • Paid training and career advancement, • Medical, Dental, Vision + 401K match, • HSA, FSA, DFSA, • Paid Time Off, • Van and gas card for eligible techs! Job Responsibilities – Service: • Diagnose and repair heating and cooling systems, • Perform preventative maintenance, • Read blueprints and install ductwork/equipment, • Collaborate with project teams and clients, • Work on new builds and retrofit installations Requirements: Required Skills & Experience • Strong communication and problem-solving skills, • Experience reading schematics/blueprints, • Professional attitude and commitment to quality and customer service, • This position requires a valid driver’s license., • Employment/education will be verified., • Applicants must be currently authorized to work in the United States on a full-time basis., • Able to work in a variety of extreme weather, hot and cold conditions., • Able to work safely in confined spaces such as attics, basements, closets, and crawl spaces., • Able to work safely at elevated heights such as rooftops, ceilings, and ladders., • Able to bend, crawl, stoop, stretch, and reach., • Able to walk on uneven surfaces., • Able to work off a ladder, sometimes at heights. AA/EOE

Job Description Polar Plumbing, Heating & Air Conditioning in Newburgh, NY is actively seeking a full-time HVAC Service Technician to maintain, diagnose, and repair heating and cooling equipment. This position also provides excellent customer service to our residential clients. Are you an experienced HVAC technician? Would you like to join a growing company that is family-oriented and values its employees? If so, please read on! Our HVAC Service Technicians typically work Monday through Friday between 7 AM to 5 PM while being on-call for multiple locations. There is occasional overtime and weekend work to complete jobs. This HVAC technician position comes with a competitive wage of $25 - $40/hour with a base plus compensation structure. Our technicians receive bonus pay and tips, and can easily make over $100,000/year. We provide generous benefits, including medical, dental, vision, a 401(k) plan with match, paid time off (PTO), reimbursement for expenses, uniforms, tool allowance, and more. Additionally, our technicians receive professional development assistance and tuition reimbursement! If this sounds like the right HVAC technician opportunity for you, apply today! ABOUT POLAR PLUMBING, HEATING & AIR CONDITIONING We are an award-winning, BBB-accredited company that provides first-class plumbing, heating, and air conditioning services. We offer completely transparent pricing for all our services, so our customers can be sure they're getting the absolute best value for their homes. Plumbing, heating, and cooling are some of the most important aspects of keeping a home comfortable, and we know that timing makes all the difference. That's why we are quick to respond to our customers' needs and why we offer free estimates. As a result, our customers value our honesty and trust that their homes are in the best hands. Our employees are our most valuable asset in maintaining our customers' trust. Through regular development programs, we ensure that all our employees have the training they need to succeed. We also promote an authentic team mentality and strive to make our employees feel at home in our great company culture, an environment that is more like family than work. QUALIFICATIONS FOR AN HVAC SERVICE TECHNICIAN • Previous heating and cooling experience, • Physical ability to lift up to 50 lbs. and work from heights or small crawl spaces Location: 12550

Job Description Location: Pearl River, NY Job Title: HVAC Installer Are you ready to roll up your sleeves and join a team that's all about your growth and success? We're not just about the job—we're about building careers that last. We're proud to be a company that values good old-fashioned hard work and the satisfaction of a job well done. We work hard, but we have fun, too! You'll be a crucial part of our team as an HVAC Installer. You'll install and connect various HVAC systems, ensuring they operate efficiently and meet all safety and quality standards. We're looking for individuals who take pride in their work, have a strong work ethic, and are eager to learn and grow alongside our team. Responsibilities and Expectations: * Install, maintain, and repair refrigeration, heating, and air conditioning systems. * Capable of independently performing the entire installation process to collaborate with team members to make sure the job is done efficiently with no callbacks. * Ensure efficient material usage and maintain sufficient equipment stock. * Collect payment or payment details from customers for services rendered. * Maintain company vehicle and equipment, ensuring cleanliness and proper functioning. * Prepare invoices, daily route sheets, and weekly reports as necessary. * Maintain accurate logs of all work performed. * Ensure our reputation for superior service is maintained during all interactions with customers. * Fulfill additional responsibilities as required, including cross-training in various roles. Requirements: * 5+ years of Residential HVAC Installation experience. * EPA Universal Certification. * Heating/Boiling/AC experience required. * Exceptional customer communication skills. * A team player who thrives in both collaborative and independent settings. * An enthusiastic and positive individual eager to embrace challenges. * Physically able to work on HVAC units - Must be able to lift 50 pounds at a time. * Prolonged periods of standing, kneeling, crawling, or climbing ladders. * Ability to work outside; exposed to heat and cold. What Can We Do for You? * Competitive Compensation ranges between $25 - $32/hour! * Stable work environment where your growth is encouraged and supported. * Continuous and extensive training and development opportunities. * Medical, dental, and vision insurance * Long-term disability and company-paid life insurance. * 401K plan with company match. * PTO and paid holidays. * Company-provided vehicle, phone, and tablet. The compensation for this position is expected to range between $25.00 - $32.00 per hour. This range is a good-faith estimate, based on the qualifications necessary for the position, including experience, training, and other considerations permitted by law. Factors that may be used when making an offer may include a candidate's skills, experience, the expected quality and quantity of work, and internal pay alignment, as needed. We are an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, sexual orientation, gender identity or any other characteristic protected by law. Employee(s) will be required to follow any other job-related instructions and to perform any other job-related duties requested by any person authorized to give instructions or assignments.

Job Description Position Summary The Senior Maintenance Technician will lead maintenance activities in a GMP-regulated pharmaceutical manufacturing environment, ensuring reliable operation of production and facility systems. This role focuses on equipment uptime, preventive maintenance, troubleshooting, and continuous improvement of utilities and process equipment—including tablet presses, granulation systems, and HVAC systems supporting cleanroom operations. Key Responsibilities • Perform and oversee preventive, predictive, and corrective maintenance on pharmaceutical manufacturing and facility equipment., • Lead troubleshooting and repair efforts on tablet presses, granulators, blenders, fluid bed dryers, coating machines, and other process equipment., • Maintain and repair facility utilities such as HVAC systems, compressed air, purified water, steam, chilled water, and vacuum systems., • Support calibration and mechanical integrity programs to ensure GMP compliance., • Collaborate with Production, Engineering, and Quality departments to minimize downtime and ensure regulatory requirements are met., • Review and update maintenance SOPs, work orders, and documentation in accordance with cGMP and FDA standards., • Train and mentor junior technicians and provide technical guidance during shifts or project work., • Participate in capital projects, equipment installation, and commissioning/qualification activities (IQ/OQ/PQ)., • Identify and implement process improvements to increase reliability and reduce maintenance costs., • Education: Associate’s or Bachelor’s degree in Mechanical, Electrical, or Industrial Engineering (or equivalent technical discipline) preferred., • Experience: Minimum 5–8 years in a maintenance or engineering role within a pharmaceutical, biotech, or GMP manufacturing environment., • Strong hands-on experience with tablet compression, granulation, and packaging equipment., • Working knowledge of HVAC systems, cleanroom environments, and associated regulatory requirements (ISO 14644, cGMP)., • Familiarity with CMMS systems (e.g.,, BMRAM, Maximo, SAP PM) and maintenance documentation practices., • Strong understanding of electrical, mechanical, and pneumatic systems., • Knowledge of PLCs and control systems troubleshooting., • Experience with aseptic or sterile manufacturing utilities., • Understanding of 21 CFR Part 11 and data integrity principles., • Root cause analysis and reliability-centered maintenance experience.

🔧 Mechanic Location: Royal Waste-Jamaica or our Bronx Location Schedule: Monday through Friday, with alternating Saturdays as needed Hours: 8:00 AM – 4:30 PM Rate: $30–$40/hr, depending on experience Employment Type: Full-time Royal Waste is seeking a dedicated and skilled Mechanic to join our growing maintenance team. We're looking for individuals who prioritize safety, take pride in their work, and understand how critical their role is to supporting our drivers and the service we provide to the community. Key Responsibilities * Perform inspections, repairs, and diagnostics on diesel vehicles, including electrical, hydraulic, suspension, brake, and air systems * Interpret vehicle computer system failure codes and make necessary adjustments to engine and vehicle control modules * Review and complete repairs noted on Driver Vehicle Inspection Reports * Accurately document services using fleet maintenance software * Conduct post-service test drives to ensure safety and performance * Collaborate with teammates on complex repairs * Maintain professional, courteous communication with drivers and team members * Keep workspaces clean and compliant with OSHA standards * Perform other job-related duties as assigned What We're Looking For * Minimum 5 years of mechanic experience, preferably with diesel trucks * Strong skills in electrical and hydraulic systems * Well-rounded experience in mechanical and welding repairs * Familiarity with diesel vehicle diagnostics and preventative maintenance * Basic tool set required * Valid CDL Class B or A license, not required but a big plus * Ability to work independently within a shop environment * Commitment to safety, quality, and teamwork What We Offer * Competitive compensation * 401(k) with company match * Medical, dental, and vision coverage * Life insurance and short-term/long-term disability * Employee Assistance Mental Health Program * Emergency Travel Assistance & Prepaid Legal Plan * Employee Stock Purchase Plan & Employee Relief Fund * Scholarship opportunities for employees’ children Waste Connections is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to disability or protected veteran status. #ACMaintenance

Job DescriptionDescription: Operates an upright stranding machine or Bartell machine to strand wire onto a spool. Supervises the general quality of the wire/cable. Maintains and cleans the machines and area as required. Duties and Responsibilities: • Measures wire/cable for size using micrometers., • Clears area of other wire materials. Completes job cards and wire log sheets., • Sets up the machines by threading wire through machine guides. Secures materials according to job being run., • Respools wire/cable using respooling machines., • Any other duties as assigned by supervisor.Requirements:, • Demonstrates ability to self-motivate and to problem solve in a fast-paced setting., • Excellent organizational skills and attention to detail, • Must have good documentation practice., • A proven understanding of part workmanship., • While performing the duties of this job, the employee occasionally works near moving mechanical parts and is occasional exposed to wet and/or humid conditions, ambient air, fumes or airborne particles., • The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job., • Candidate must be able to perform the physical responsibilities of the job utilizing arms, hands, and fingers to perform complex functions of manufacturing parts and performing other duties of the job; e.g., standing, sitting, walking throughout the facility and stairs, bending, squatting, and kneeling, etc. Benefits: Eligible after 1st day: • Paid holidays, • Medical, Dental, Vision, Basic Life/AD&D Insurance, Voluntary Term Life/AD&D Insurance, • Health Savings Account (HSA), Flexible Spending Account (FSA), Dependent Care Account, Commuter Transportation Management Account, • Vacation time, • 401(k) with Employer Match We’re proud to be an equal opportunity employer. This means we actively pursue ways to celebrate our differences and don’t discriminate based on an individual’s race (including traits historically associated with race, such as hair texture, hair type, and protective hairstyles including braids, locks, and twists), creed, national origin, nationality, religion, ancestry, age (40 or over), sex (including pregnancy), familial status, marital status, civil union or domestic partnership status, affectional or sexual orientation, gender identity or expression, mental or physical disability (including perceived disability, AIDS, and HIV status), atypical hereditary cellular or blood trait, genetic information, because of liability for service in military, status as a smoker or non-smoker, status as a registered medical marijuana user, or any unlawful criterion existing under applicable federal, state, or local laws. If you need assistance or an accommodation due to a disability, contact us at .

Job DescriptionBenefits: • 401(k) matching, • Competitive salary, • Opportunity for advancement, • Bonus based on performance Job Description: As a core aeration technician, you will provide detail-oriented, customer-focused lawn care services. Our core aeration technicians are customer-facing brand ambassadors. You will be responsible for operating specialized power equipment to perforate the soil and improve air, water, and nutrient flow to the grassroots. This process is used to improve soil health and enhance the growth of the lawn. You will also treat lawns with top quality, environmentally sensitive products, perform shop work, and offer appropriate new services to customers and prospects while in the field. This is a great opportunity for someone who enjoys physical, hands-on work and wants to make an impact on the health of lawns. Lawn Doctor believes that employees who are given a chance to grow professionally will, in turn, help to grow our business. Responsibilities: • Operate core aeration equipment to perforate soil and improve lawn health., • Drive a truck with a trailer on a daily basis, • Assess lawn conditions and provide feedback to clients on lawn care needs., • Communicate professionally and courteously with clients during on-site visits., • Perform routine maintenance and care for aeration equipment., • Ensure timely and accurate completion of scheduled services., • Educate clients on the benefits of core aeration and other lawn care practices., • Assist with other lawn care tasks as needed.The ideal Lawn Care Technician candidate will have a strong work ethic, a valid drivers license, a clean driving record, experience operating machinery, reliable transportation to work, and a good attendance record. Actual work experience in the lawn care industry is highly desirable, but must-haves are: • Good written and verbal communication skills, • Enthusiasm for working outdoors and in various weather conditions, • Ability to operate machinery, • Ability to meet production goals

Be visionary Teledyne Technologies Incorporated provides enabling technologies for industrial growth markets that require advanced technology and high reliability. These markets include aerospace and defense, factory automation, air and water quality environmental monitoring, electronics design and development, oceanographic research, deepwater oil and gas exploration and production, medical imaging and pharmaceutical research. We are looking for individuals who thrive on making an impact and want the excitement of being on a team that wins. Job Description The QA Technician performs routine SMT and mechanical receiving inspections to ensure compliance with established quality standards. Working closely with Operations and Engineering, this role supports a wide range of in-house PCBA soldering modifications using well-defined methods and accessible documentation. The technician also contributes to internal root-cause analysis and corrective-action activities to support continuous improvement. ESSENTIAL DUTIES & RESPONSIBILITIES \n • Follow documented inspection procedures for both electrical and mechanical evaluations.\n, • Perform SMT/PCBA incoming inspection to verify conformance to specifications.\n, • Execute in-house PCBA changes, rework, and soldering modifications as required.\n, • Conduct incoming mechanical inspections using precision measurement tools.\n, • Document incoming inspection failures and initiate return to vendor paperwork. Could include conference calls with Vendors.\n, • Accurately document findings and enter inspection data into the ERP system.\n, • Ensure all work is performed in accordance with safety regulations and company procedures.\n, • Participate actively in quality improvement initiatives, including problem-solving and corrective actions.\n, • Position could extend to Cable/Crimp inspection with training.\n\n EDUCATION & EXPERIENCE \n • High School Diploma or equivalent required.\n, • 2-4 years of relevant experience in electronics, SMT, quality inspection, or a related field.\n, • Proficiency with mechanical inspection tools (calipers, micrometers).\n, • Experience with microscope inspection and SMT soldering required.\n, • IPC J-STD-001 and/or IPC-A-610 certification preferred.\n\n JOB KNOWLEDGE, SKILLS & ABILITIES \n • Ability to read and interpret PCBA drawings, diagrams, schematics, and related documentation.\n, • Strong mechanical aptitude and manual dexterity; skilled in hand-tools and soldering techniques.\n, • Effective verbal and written communication skills; strong interpersonal skills required.\n, • Proficient in Microsoft Office.\n, • Comfortable working with microscopes and other precision inspection equipment.\n\n Salary Range: $44,500.00-$59,300.000 Pay Transparency The anticipated salary range listed for this role is only an estimate. Actual compensation for successful candidates is carefully determined based on several factors including, but not limited to, location, local regulations (such as minimum wage), education/training, work experience, key skills, and type of position. Teledyne and all of our employees are committed to conducting business with the highest ethical standards. We require all employees to comply with all applicable laws, regulations, rules and regulatory orders. Our reputation for honesty, integrity and high ethics is as important to us as our reputation for making innovative sensing solutions. Teledyne is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age, or any other characteristic or non-merit based factor made unlawful by federal, state, or local laws.

Be visionary Teledyne Technologies Incorporated provides enabling technologies for industrial growth markets that require advanced technology and high reliability. These markets include aerospace and defense, factory automation, air and water quality environmental monitoring, electronics design and development, oceanographic research, deepwater oil and gas exploration and production, medical imaging and pharmaceutical research. We are looking for individuals who thrive on making an impact and want the excitement of being on a team that wins. Job Description The Maintenance Mechanic maintains and repairs facility structures, equipment, and grounds to ensure safe, reliable, and efficient operations. The role performs a variety of skilled trades work, including plumbing, electrical, HVAC, carpentry, and painting, and supports manufacturing and process engineering by maintaining building systems required for production activities. Job Responsibilities \n • Maintain, troubleshoot, and repair facility structures, equipment, and grounds, including plumbing, electrical, and HVAC systems\n, • Perform skilled trades work such as carpentry, painting, and general construction related to the construction, repair, or alteration of walls, roofs, and office fixtures\n, • Support manufacturing and process engineering with the installation, modification, or repair of building plumbing and wiring required for production processes\n, • Conduct routine and special inspections of facilities and equipment to identify maintenance and repair needs\n, • Diagnose maintenance issues and determine appropriate corrective actions\n, • Read and interpret blueprints, drawings, schematics, and rough sketches to complete assigned work\n, • Ensure work is completed in compliance with safety standards, building codes, and company policies\n, • Maintain tools, equipment, and work areas in a safe and orderly condition\n, • Perform other duties as assigned\n\n Required Qualifications \n • High school diploma or equivalent\n, • Demonstrated experience in facility maintenance or skilled trades\n, • Working knowledge of plumbing, electrical, HVAC, and general building maintenance\n, • Ability to read and interpret blueprints and technical drawings\n, • Ability to work independently and prioritize tasks effectively\n, • Valid Driver's License with no more than 3 points in the past year\n\n Salary Range: $50,600.00-$67,500.000 Pay Transparency The anticipated salary range listed for this role is only an estimate. Actual compensation for successful candidates is carefully determined based on several factors including, but not limited to, location, local regulations (such as minimum wage), education/training, work experience, key skills, and type of position. Teledyne and all of our employees are committed to conducting business with the highest ethical standards. We require all employees to comply with all applicable laws, regulations, rules and regulatory orders. Our reputation for honesty, integrity and high ethics is as important to us as our reputation for making innovative sensing solutions. Teledyne is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age, or any other characteristic or non-merit based factor made unlawful by federal, state, or local laws.

Be visionary Teledyne Technologies Incorporated provides enabling technologies for industrial growth markets that require advanced technology and high reliability. These markets include aerospace and defense, factory automation, air and water quality environmental monitoring, electronics design and development, oceanographic research, deepwater oil and gas exploration and production, medical imaging and pharmaceutical research. We are looking for individuals who thrive on making an impact and want the excitement of being on a team that wins. Job Description Teledyne LeCroy is a leading manufacturer of high-performance electronic test and measurement equipment located in Chestnut Ridge, NY (Rockland County, NY). Our team consists of passionate and experienced engineers, technicians, and assemblers who work on a wide range of problems in a highly collaborative work environment. We are currently looking for an Electro-Mechanical Assembler to support the manufacturing team in the production of oscilloscopes, probes, and cables. Responsibilities: \n • Execute documented assembly procedures, both electrical and mechanical:\n, • Product assembly by using a microscope and/or hand tools.\n, • Hand soldering assembly of high precision small components.\n\n\n, • Perform data entry into the manufacturing database.\n, • Attend cell meetings:\n, • Participate in cost reduction and process improvement initiatives.\n, • Communicate issues, concerns, and questions to manufacturing engineering.\n\n\n\n Education and Experience: • High school diploma or equivalent.\n Job Knowledge and Skills: \n • Good eye/hand coordination.\n, • Must be able to perform repetitive assembly work.\n, • Ability to work in a fast-paced environment.\n, • Must be able to read and understand English.\n, • Clear communication skills, both verbal and written.\n, • Must be able to work well in a team environment and independently.\n, • Must be able to maneuver 25 lb. equipment.\n, • Things that are a plus and will help you stand out.\n, • Soldering experience\n, • Microscope experience\n, • Genuine interest in manufacturing as a career path\n, • IPC J-Std-001 and/or IPC-A-610\n, • Experience with UV glue or epoxy\n, • Above average computer skills (Microsoft Office)\n, • Ability to read and understand PCBA documents, diagrams, and schematics\n\n\n\n Salary Range: $32,300.00-$43,100.000 Pay Transparency The anticipated salary range listed for this role is only an estimate. Actual compensation for successful candidates is carefully determined based on several factors including, but not limited to, location, education/training, work experience, key skills, and type of position. Teledyne and all of our employees are committed to conducting business with the highest ethical standards. We require all employees to comply with all applicable laws, regulations, rules and regulatory orders. Our reputation for honesty, integrity and high ethics is as important to us as our reputation for making innovative sensing solutions. Teledyne is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age, or any other characteristic or non-merit based factor made unlawful by federal, state, or local laws.

Be visionary Teledyne Technologies Incorporated provides enabling technologies for industrial growth markets that require advanced technology and high reliability. These markets include aerospace and defense, factory automation, air and water quality environmental monitoring, electronics design and development, oceanographic research, deepwater oil and gas exploration and production, medical imaging and pharmaceutical research. We are looking for individuals who thrive on making an impact and want the excitement of being on a team that wins. Job Description The Maintenance Mechanic maintains and repairs facility structures, equipment, and grounds to ensure safe, reliable, and efficient operations. The role performs a variety of skilled trades work, including plumbing, electrical, HVAC, carpentry, and painting, and supports manufacturing and process engineering by maintaining building systems required for production activities. Job Responsibilities \n • Maintain, troubleshoot, and repair facility structures, equipment, and grounds, including plumbing, electrical, and HVAC systems\n, • Perform skilled trades work such as carpentry, painting, and general construction related to the construction, repair, or alteration of walls, roofs, and office fixtures\n, • Support manufacturing and process engineering with the installation, modification, or repair of building plumbing and wiring required for production processes\n, • Conduct routine and special inspections of facilities and equipment to identify maintenance and repair needs\n, • Diagnose maintenance issues and determine appropriate corrective actions\n, • Read and interpret blueprints, drawings, schematics, and rough sketches to complete assigned work\n, • Ensure work is completed in compliance with safety standards, building codes, and company policies\n, • Maintain tools, equipment, and work areas in a safe and orderly condition\n, • Perform other duties as assigned\n\n Required Qualifications \n • High school diploma or equivalent\n, • Demonstrated experience in facility maintenance or skilled trades\n, • Working knowledge of plumbing, electrical, HVAC, and general building maintenance\n, • Ability to read and interpret blueprints and technical drawings\n, • Ability to work independently and prioritize tasks effectively\n, • Valid Driver's License with no more than 3 points in the past year\n\n Salary Range: $50,600.00-$67,500.000 Pay Transparency The anticipated salary range listed for this role is only an estimate. Actual compensation for successful candidates is carefully determined based on several factors including, but not limited to, location, local regulations (such as minimum wage), education/training, work experience, key skills, and type of position. Teledyne and all of our employees are committed to conducting business with the highest ethical standards. We require all employees to comply with all applicable laws, regulations, rules and regulatory orders. Our reputation for honesty, integrity and high ethics is as important to us as our reputation for making innovative sensing solutions. Teledyne is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age, or any other characteristic or non-merit based factor made unlawful by federal, state, or local laws.

Be visionary Teledyne Technologies Incorporated provides enabling technologies for industrial growth markets that require advanced technology and high reliability. These markets include aerospace and defense, factory automation, air and water quality environmental monitoring, electronics design and development, oceanographic research, deepwater oil and gas exploration and production, medical imaging and pharmaceutical research. We are looking for individuals who thrive on making an impact and want the excitement of being on a team that wins. Job Description The Maintenance Mechanic maintains and repairs facility structures, equipment, and grounds to ensure safe, reliable, and efficient operations. The role performs a variety of skilled trades work, including plumbing, electrical, HVAC, carpentry, and painting, and supports manufacturing and process engineering by maintaining building systems required for production activities. Job Responsibilities \n • Maintain, troubleshoot, and repair facility structures, equipment, and grounds, including plumbing, electrical, and HVAC systems\n, • Perform skilled trades work such as carpentry, painting, and general construction related to the construction, repair, or alteration of walls, roofs, and office fixtures\n, • Support manufacturing and process engineering with the installation, modification, or repair of building plumbing and wiring required for production processes\n, • Conduct routine and special inspections of facilities and equipment to identify maintenance and repair needs\n, • Diagnose maintenance issues and determine appropriate corrective actions\n, • Read and interpret blueprints, drawings, schematics, and rough sketches to complete assigned work\n, • Ensure work is completed in compliance with safety standards, building codes, and company policies\n, • Maintain tools, equipment, and work areas in a safe and orderly condition\n, • Perform other duties as assigned\n\n Required Qualifications \n • High school diploma or equivalent\n, • Demonstrated experience in facility maintenance or skilled trades\n, • Working knowledge of plumbing, electrical, HVAC, and general building maintenance\n, • Ability to read and interpret blueprints and technical drawings\n, • Ability to work independently and prioritize tasks effectively\n, • Valid Driver's License with no more than 3 points in the past year\n\n Salary Range: $50,600.00-$67,500.000 Pay Transparency The anticipated salary range listed for this role is only an estimate. Actual compensation for successful candidates is carefully determined based on several factors including, but not limited to, location, local regulations (such as minimum wage), education/training, work experience, key skills, and type of position. Teledyne and all of our employees are committed to conducting business with the highest ethical standards. We require all employees to comply with all applicable laws, regulations, rules and regulatory orders. Our reputation for honesty, integrity and high ethics is as important to us as our reputation for making innovative sensing solutions. Teledyne is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age, or any other characteristic or non-merit based factor made unlawful by federal, state, or local laws.

Job Description We are seeking a highly experienced Senior Firmware Engineer to help design, build, and scale the embedded systems products. This role sits at the intersection of hardware, firmware, cloud, and user experience, working closely with UX, Culinary, Video, Software, and Hardware Engineering teams to deliver reliable, high-quality products from concept through production and beyond. The ideal candidate brings deep hands-on experience with embedded firmware development, strong architectural judgment, and a passion for building scalable, maintainable systems in a fast-paced consumer product environment. You will play a key role in technical decision-making, code quality, system performance, and the evolution of our embedded platform as we continue to expand our connected product ecosystem. Responsibilities • Collaborate with UX, Video, Software, and Hardware Engineering Teams to review requirements, design and implement features for our product assortment, • Produce well designed, high quality and reusable code by applying design patterns and best practices in software development for agility, reliability, and scalability of the application, • Refactor code base from time to time to improve performance, reliability and maintainability of the application, • Contribute to architecture, instrumentation and performance design decisions, • Write unit and integration tests, • Participate in code reviews, • Carry out testing and debugging, • Improve efficiency of deployment and testing via CI/CD processes, • Triage and resolve issues reported by QE or other users, • Participate in daily standups and weekly sync-up meetings with stakeholders, • Participate in sprint planning sessions by reviewing goals and grooming stories, • Scale architecture with modern technologies such as Docker while leveraging the AWS platform and Atlassian software (Bitbucket pipelines, Jira automation, etc.), • Effectively connecting to a culture of delivering high quality content around the brand vision Qualifications • Bachelor’s degree in Electrical or Computer Engineering, or equivalent degrees, • 10+ years of experience in electronic product development involving analog and digital circuit designs with 32-bit ARM microcontrollers, • 10+ years of experience with C/C++, • Experience in wired (UART, SPI, I2C) and wireless communication, • Experience working and collaborating in a team setting using version control systems such as Git and following Software Development best practices (SDLC) using tools like Jira and Confluence, • Ability to troubleshoot hardware using tools such as scope, logic analyzer, spectrum analyzer, JTAG, etc., • Excellent written and oral communication skills Desired Skills and Experience • Good understanding of application bootloader and over the air firmware update, • Experience architecting and designing systems for embedded applications, • Experience with real-time operating system (RTOS), Wi-Fi/Bluetooth communication, and a good understanding of the network stack such as TCP/IP protocol, • Familiar with implementing IOT products using ESP module and LCD display is a plus, • Experience working in an agile environment within the scrum framework, • High level knowledge of software engineering and cloud environments, • Ability to work with minimal supervision and to participate and contribute positively when working with different teams, • Demonstrated initiative and ability to complete projects, document work and communicate clearly both in writing and verballyCompany DescriptionRecruiting CompanyRecruiting Company

Overview: Interstate Waste Services is the most progressive and innovative provider of solid waste and recycling services in the greater New York, New Jersey and Connecticut markets with a railserved landfill in Ohio. IWS is committed to delivering high-quality waste, recycling and environmental services, while prioritizing the safety of our employees, customers and communities. We cater to a diverse range of industrial, medical and commercial/residential customers. Founded in 1998, IWS has grown over the years through acquisitions, many of which were familyowned businesses that remain a part of our team today. We're proud to combine the resources of a large company with the values and care of a family-run business. Essential Job Summary:: Our Heavy Equipment Technician/Mechanic perform inspection, diagnosis, preventative maintenance, and repair of electrical, hydraulic, suspension, brake and air systems on vehicles and equipment, primarily including yellow iron machinery, diesel heavy trucks and engines. The Technician or Mechanic is not only responsible for understanding maintenance and breakdown needs and initiating/assigning necessary repairs, but also must be able to operate the machinery being repaired. At times, the Technician may be on call and required to assist with emergency breakdowns. Essential Job Functions: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Other minor duties may be assigned.: * Maintains advanced knowledge to diagnose and repair mechanical problems on heavy equipment (heavy equipment includes but not limited to: Transloading, tractor trailers, forklifts,and other diesel trucks) * Performs repairs and assigned preventative maintenance services. * Estimates time and material cost on vehicle repairs and requisition of new parts. * Conduct safety checks on vehicles. * Completes required paperwork utilizing fleet maintenance software program associated with repairing vehicles, documenting part usage, and accounting for repair time. * Reviews, completes, or assigns repairs identified on Driver Vehicle Inspection Reports. * Maintain a clean, safe work area in compliance with Company safety protocols and OSHA standards. * This position will have no direct reports, however they will work in collaboration with the other yellow iron diesel mechanic on staff, although on different shifts. * Assists Sr. Technicians in the completion of project work. Requirements and Qualifications:: * Applicants must be at least 18 years of age and legally eligible to work in the United States. * A valid driver's license is required. CDL a plus. * At least 5 years of experience in job duties. * Sanitation or construction industry experience a plus. * Computer diagnostic experience as diesel technician a plus. * Experience with troubleshooting/repairing DPF systems diagnostic software such as Premium Tech Tool (Mack), Allison transmission, Cummins, CAT, Peterbilt, and Paccar. * Working knowledge of applicable DOT and OSHA standards and regulations. * Must be able to speak and read English well enough to converse with colleagues, drivers and dispatch, and be able to make legible entries on reports and records. * Must be able to meet the physical and safety requirements of the position. * Must be able to provide own tools Work Environment: * We are continuously investing in equipment, and many of our trucks are less than 2 years old. * The Heavy Equipment Technician/Mechanic will primarily be working out of our Transloading station at 65 central ave in Kearney, however occasional travel to other sites to pick up parts as well as assisting with emergency breakdowns may be required. * Potentially hazardous work environment with many moving parts and machinery; must always be alert of surroundings. * Only during breakdowns will this position be required to enter transfer station loading/ dumping area. * Personal Protective Equipment (PPE) will be provided. * The Heavy Equipment Technician/Mechanic may be required to lift upwards to 50 pounds. Frequent squatting and standing are required. Additional Information: This job description is intended to be an accurate representation of the general functions of the job, rather than exhaustive list of duties, responsibilities, or experience. Other duties may be assigned, requested, or required. Aspects of the job may be altered without notice. Interstate Waste Services provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Salary Range Minimum: USD $35.00/Hr. Salary Range Maximum: USD $52.00/Hr.

Teledyne Technologies Incorporated provides enabling technologies for industrial growth markets that require advanced technology and high reliability.These markets include aerospace and defense, factory automation, air and water quality environmental monitoring, electronics design and development, o

Job DescriptionDescription: The assembly operator oversees and operates machines necessary to swage cable, to perform cable end treatments, to swage fittings, to cut or trim cable, to grind assemblies to length and to assemble cable components. Counts packages and labels completed cable assemblies. This position is responsible to maintain acceptable production outputs and quality of wire/cable assembly. Duties and Responsibilities: • Takes and follows directions from both, operational performance and job requirements from Supervisors, Facilitators on a job by job basis., • Clear area of previous job materials., • Completes job cards, routers and job documentation as required., • Operates lathes, welders, presses, grinders, cable cutters, swagers, packaging equipment and other equipment necessary to manufacture cable assemblies., • Maintains material traceability by completing records of materials usage for each job., • Monitors and performs visual and tactile inspection of assembled parts., • Performs proof-loading of assembled parts., • Gathers samples for start-up and in-process testing and inspection., • Packages and labels processed material according to job card instructions., • Reports part or process quality issues to their supervisor or any quality personnel., • Any other duties as assigned by supervisor. Requirements: • Prior experience is preferred but not required., • Demonstrates ability to self-motivate and to problem solve in a fast-paced setting., • Excellent organizational skills and attention to detail., • Must have good documentation practice., • A proven understanding of part workmanship., • Ability to analyze data and make recommendations., • Ability to troubleshoot manufacturing defects., • Strong interpersonal skills., • Ability to seek and accept feedback from others., • While performing the duties of this job, the employee occasionally works near moving mechanical parts and is occasionally exposed to wet and/or humid conditions, ambient air, fumes or airborne particles., • The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job., • Candidate must be able to perform the physical responsibilities of the job utilizing arms, hands, and fingers to perform complex functions of manufacturing parts and performing other duties of the job; e.g. standing, sitting, walking throughout the facility and stairs. Benefits: Eligible after 1st day: • Paid holidays, • Medical, Dental, Vision, Basic Life/AD&D Insurance, Voluntary Term Life/AD&D Insurance, • Health Savings Account (HSA), Flexible Spending Account (FSA), Dependent Care Account, Commuter Transportation Management Account, • Vacation time, • 401(k) with Employer Match We’re proud to be an equal opportunity employer. This means we actively pursue ways to celebrate our differences and don’t discriminate based on an individual’s race (including traits historically associated with race, such as hair texture, hair type, and protective hairstyles including braids, locks, and twists), creed, national origin, nationality, religion, ancestry, age (40 or over), sex (including pregnancy), familial status, marital status, civil union or domestic partnership status, affectional or sexual orientation, gender identity or expression, mental or physical disability (including perceived disability, AIDS, and HIV status), a typical hereditary cellular or blood trait, genetic information, because of liability for service in military, status as a smoker or non-smoker, status as a registered medical marijuana user, or any unlawful criterion existing under applicable federal, state, or local laws. If you need assistance or an accommodation due to a disability, contact us at .

Job DescriptionDescription: The Process Engineer defines, maps, implements and sustains processes in the company. They react to changes by monitoring key metrics and leading the effort to bring and keep all processes in control. They find solutions by procuring new materials, methods, and technologies, in order to improve different metrics at ABI, including yield, OEE, quality and EHS related metrics. They work with suppliers and customer on projects that benefit all companies involved. They communicate the status of their projects and make recommendations by writing reports and presenting them to stakeholders. Duties and Responsibilities • Defines, characterizes, and leads the implementation of new processes., • Participate in activities to drive improvements for critical performance metrics such as process yields, scrap loss, equipment utilization, operating costs, etc., • Writes and updates engineering control documents, like Work Instructions, Control Plans, process flow charts, PFMAs, etc., • Implement, monitor and react to Key Performance Indicators (KPIs) trends and other metrics with the goal of controlling ranges to provide a consistent product that meets the expectations of our internal and external customers., • Perform root cause and corrective action investigations to identify the origin of a process failure and institute preventative measures to eliminate a reoccurrence., • Effectively use writing and verbal skills to communicate processing concepts and projects to customers, operating personnel, other company departments, technical staff and upper-level management., • Comply with all department, facility, corporate and regulatory Environmental, Health & Safety (EHS) regulations as well as manage existing or new EHS program(s) across the business as assigned., • Use and collaborate with operators and other employees in problem solving methodology like A3, 5S, and other improvement tools., • Review, disposition and provide instructions for non-conforming materials in order to reclaim or dispose of them., • Work with other departments to lead or support the approval of new suppliers, vendors, as well as Supplier Change Requests (SCR)., • Expected to assist in the implementation of Alan Baird value and policy statement, accompanying its principles., • Performs other related duties as assigned. Requirements: • Possess strong problem solving and troubleshooting skills for supporting all aspects of the engineering infrastructure., • Communication skills – must have good listening skills in addition to excellent verbal and written communication abilities., • Ability to work and interact effectively in a fast-paced, cross-functional team atmosphere., • Intermediate to advanced skill level in Microsoft Word, Excel, Power Point, and Outlook., • Ability to collect and analyze data to make recommendations., • Must be capable and willing to learn and share knowledge and develop associates., • Ability to work with all levels of personnel from company president to production associates., • Knowledge of statistical analysis methods is preferred., • Experience with data handling script tools is a plus (e.g., Python)., • Bachelor’s degree in Materials Engineering, Mechanical Engineering or equivalent., • Minimum of 5 years’ experience in manufacturing; a fast-paced small parts manufacturing environment is preferred., • Six Sigma certification is a plus., • While performing the duties of this job, the employee occasionally works near moving mechanical parts and is occasionally exposed to wet and/or humid conditions, ambient air, fumes, or airborne particles., • While performing the duties of this job, the employee will encounter prolonged periods of sitting at a desk, working on a computer, walking, talking or listening; use of hands and fingers to operate a computer, telephone and others office devices and reach with hands and arms., • The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job., • Candidate must be able to perform the physical responsibilities of the job utilizing arms, hands, and fingers to perform complex functions of manufacturing parts and performing other duties of the job, e.g., standing, sitting, walking throughout the facility and stairs, bending, squatting, and kneeling, etc. Benefits: Eligible after 1st day: • Paid holidays, • Medical, Dental, Vision, Basic Life/AD&D Insurance, Voluntary Term Life/AD&D Insurance, • Health Savings Account (HSA), Flexible Spending Account (FSA), Dependent Care Account, Commuter Transportation Management Account, • Vacation time, • 401(k) with Employer Match We’re proud to be an equal opportunity employer. This means we actively pursue ways to celebrate our differences and don’t discriminate based on an individual’s race (including traits historically associated with race, such as hair texture, hair type, and protective hairstyles including braids, locks, and twists), creed, national origin, nationality, religion, ancestry, age (40 or over), sex (including pregnancy), familial status, marital status, civil union or domestic partnership status, affectional or sexual orientation, gender identity or expression, mental or physical disability (including perceived disability, AIDS, and HIV status), atypical hereditary cellular or blood trait, genetic information, because of liability for service in military, status as a smoker or non-smoker, status as a registered medical marijuana user, or any unlawful criterion existing under applicable federal, state, or local laws. If you need assistance or an accommodation due to a disability, contact us at .

Job DescriptionDescription: The assembly operator oversees and operates machines necessary to swage cable, to perform cable end treatments, to swage fittings, to cut or trim cable, to grind assemblies to length and to assemble cable components. Counts packages and labels completed cable assemblies. This position is responsible to maintain acceptable production outputs and quality of wire/cable assembly. Duties and Responsibilities: • Takes and follows directions from both, operational performance and job requirements from Supervisors, Facilitators on a job by job basis., • Clear area of previous job materials., • Completes job cards, routers and job documentation as required., • Operates lathes, welders, presses, grinders, cable cutters, swagers, packaging equipment and other equipment necessary to manufacture cable assemblies., • Maintains material traceability by completing records of materials usage for each job., • Monitors and performs visual and tactile inspection of assembled parts., • Performs proof-loading of assembled parts., • Gathers samples for start-up and in-process testing and inspection., • Packages and labels processed material according to job card instructions., • Reports part or process quality issues to their supervisor or any quality personnel., • Any other duties as assigned by supervisor. Requirements: • Prior experience is preferred but not required., • Demonstrates ability to self-motivate and to problem solve in a fast-paced setting., • Excellent organizational skills and attention to detail., • Must have good documentation practice., • A proven understanding of part workmanship., • Ability to analyze data and make recommendations., • Ability to troubleshoot manufacturing defects., • Strong interpersonal skills., • Ability to seek and accept feedback from others., • While performing the duties of this job, the employee occasionally works near moving mechanical parts and is occasionally exposed to wet and/or humid conditions, ambient air, fumes or airborne particles., • The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job., • Candidate must be able to perform the physical responsibilities of the job utilizing arms, hands, and fingers to perform complex functions of manufacturing parts and performing other duties of the job; e.g. standing, sitting, walking throughout the facility and stairs. Benefits: Eligible after 1st day: • Paid holidays, • Medical, Dental, Vision, Basic Life/AD&D Insurance, Voluntary Term Life/AD&D Insurance, • Health Savings Account (HSA), Flexible Spending Account (FSA), Dependent Care Account, Commuter Transportation Management Account, • Vacation time, • 401(k) with Employer Match We’re proud to be an equal opportunity employer. This means we actively pursue ways to celebrate our differences and don’t discriminate based on an individual’s race (including traits historically associated with race, such as hair texture, hair type, and protective hairstyles including braids, locks, and twists), creed, national origin, nationality, religion, ancestry, age (40 or over), sex (including pregnancy), familial status, marital status, civil union or domestic partnership status, affectional or sexual orientation, gender identity or expression, mental or physical disability (including perceived disability, AIDS, and HIV status), a typical hereditary cellular or blood trait, genetic information, because of liability for service in military, status as a smoker or non-smoker, status as a registered medical marijuana user, or any unlawful criterion existing under applicable federal, state, or local laws. If you need assistance or an accommodation due to a disability, contact us at .

Job DescriptionDescription: The machinist is in charge to set up and operate a variety of machine tools to produce precision parts and fabricate and modify parts to make or repair machine tools. Also maintain industrial machines, applying knowledge of mechanics, shop mathematics, metal properties, layout, and machining procedures. Duties and Responsibilities • Performs machinist duties as required to maintain and fabricate machinery., • Assists with tasks in the machine shop and production areas as needed., • Performs machining work according to required drawings or supervisor’s instructions, • Performs maintenance and machine fabrication supervising quality of the job., • Work with engineering to develop machining processes for different jobs., • Responsible for maintaining order and cleanliness in the machine shop.Requirements:, • Demonstrates ability to self-motivate and to problem solve in a fast-paced setting., • Excellent organizational skills and attention to detail., • Ability to handle numbers and multiple tasks at one time., • A proven understanding of milling machines, lathes and grinders and associated tooling and set up., • Ability to use measurement equipment and hold tolerances, • Strong interpersonal skills., • Ability to seek and accept feedback from others and complete jobs with little or no supervision., • High school diploma or equivalent., • While performing the duties of this job, the employee occasionally works near moving mechanical parts and is occasionally exposed to wet and/or humid conditions, ambient air, fumes or airborne particles., • The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job., • Candidate must be able to perform the physical responsibilities of the job utilizing arms, hands, and fingers to perform complex functions of manufacturing parts and performing other duties of the job; e.g., standing, sitting, walking throughout the facility and stairs, bending, squatting, and kneeling, etc., • Ability to lift items weighing up to 50 lbs. Pay: $30.00 - $33.00/ hour Benefits: Eligible after 1st day: • Paid holidays, • Medical, Dental, Vision, Basic Life/AD&D Insurance, Voluntary Term Life/AD&D Insurance, • Health Savings Account (HSA), Flexible Spending Account (FSA), Dependent Care Account, Commuter Transportation Management Account, • Vacation time, • 401(k) with Employer Match We’re proud to be an equal opportunity employer. This means we actively pursue ways to celebrate our differences and don’t discriminate based on an individual’s race (including traits historically associated with race, such as hair texture, hair type, and protective hairstyles including braids, locks, and twists), creed, national origin, nationality, religion, ancestry, age (40 or over), sex (including pregnancy), familial status, marital status, civil union or domestic partnership status, affectional or sexual orientation, gender identity or expression, mental or physical disability (including perceived disability, AIDS, and HIV status), atypical hereditary cellular or blood trait, genetic information, because of liability for service in military, status as a smoker or non-smoker, status as a registered medical marijuana user, or any unlawful criterion existing under applicable federal, state, or local laws.

Job Description Reliability Technician / Mechanic Full Time NY-Chestnut Ridge Site, Chestnut Ridge, NY, US Job Summary The Pharmaceutical Maintenance Mechanic II performs facility reliability maintenance activities in accordance with approved procedures requiring limited supervision. Proficient at analyzing and troubleshooting the root cause of facility, manufacturing and packaging equipment problems. Implements effective preventive and/or corrective maintenance repairs to provide increased reliability. Identifies maintenance improvements that increase efficiency, throughput, and quality. May train others in setting up equipment. Identifies and solves complex problems. Understands the practical application to problems and situations ordinarily encountered and makes decisions that require choosing from several options. Knowledge • Has a wide range of technical skills and operational knowledge in procedures, techniques, tools, materials and/or needed equipment., • Understands the practical applications to problems and situations ordinarily encountered., • Fully knowledgeable of cGMP regulations and processes., • Knowledge of equipment capabilities and the ability to train others., • Qualified with appropriate certifications, as required, and demonstrates competence in equipment maintenance, repair and set-up., • Ability to troubleshoot independently., • Ability to assess and perform PM tasks and train others in this area., • Ability to read schematics, technical drawings, and blueprints., • Interfaces with external vendors and service providers., • May be required to be proficient in troubleshooting & repair in 4 or more of the following areas:, • Electrical, • Hydraulics, • Pneumatics, • Mechanical, • PLC's, • Proficient in following areas:, • Ability to read and follow blueprints and engineered drawings., • Ability to use the BMS (Bldg. Management System) for HVAC., • Specialized in at least 4 of the following 5 areas:, • Utility – purified water systems, compressed air, boiler, chilled water, electrical distribution, product dust collection systems., • Building Maintenance – sewers, electronic card readers (when applicable), lighting., • Fire suppression systems., • HVAC competence and certification, as required., • General building & grounds maintenance., • Basic math, writing skills, problem solving., • Basic computer skills., • Ability to use hand tools., • General, • A High School Diploma or equivalent is required., • Level 3 Tech, • Seven years related experience and certification in assigned area(s), as required.

Job Description Location: Pearl River, NY Job Title: Experienced Service Plumber Are you a highly skilled and experienced Service Plumber looking to take your career to new heights? Join a leading plumbing, electrical, heating, and air conditioning company with a 70-year legacy of excellence. We're seeking a dedicated Service Plumber to join our team! In your role as a Service Plumber, you will complete the installation, repair, and maintenance of pipes, valves, fittings, drainage systems, and fixtures within residential settings. Responsibilities and Expectations: * Complete plumbing, drain cleaning and other related service calls. * Repair pipes, tanks and water fixtures as needed. * Installing pipes, drainage systems, sinks, toilets, and heating and cooling systems. * Testing systems for leaks and other problems. * Establish customer rapport to sell the right products and services. * Educate and assist customers in choosing the best finance options and maintenance plans. * Show yourself as a professional and be knowledgeable to win new referrals and repeat business. * Maintain communication with dispatch, manager, parts, and installation teams. * Ensure truck inventory is up to date. * Complete paperwork accurately and promptly. * Maintain a clean and professional appearance. * Participate in weekly meetings and training for professional growth. * Communicate and consult with homeowners to provide the best options for repair or replacement. Requirements: * 5+ years of experience in the plumbing industry, with a focus on residential service. * Journeyman or Master's license a huge plus * Strong technical skills and knowledge of plumbing codes and best practices. * Excellent communication and interpersonal skills. * Valid driver's license and clean driving record. What We Can Do For You? * Competitive compensation: $30-$35/hr DOE plus commission opportunities * Comprehensive benefits package, including medical, dental, vision, and life insurance. * 401(k) with company match. * Paid time off and paid holidays. * Company-provided vehicle, phone, and tablet. * Opportunities for growth and advancement within a well-established company. The compensation for this position is expected to range between $30.00 - $35.00 per hour. This range is a good-faith estimate, based on the qualifications necessary for the position, including experience, training, and other considerations permitted by law. Factors that may be used when making an offer may include a candidate's skills, experience, the expected quality and quantity of work, and internal pay alignment, as needed. We are an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, sexual orientation, gender identity or any other characteristic protected by law. Employee(s) will be required to follow any other job-related instructions and to perform any other job-related duties requested by any person authorized to give instructions or assignments.

Job DescriptionDescription: The Spooling Inspector is in charge of checking all cable used in production to determine defects that may affect quality of the final product. Duties and Responsibilities: • Inspects and tests coated or uncoated wire and cable for such properties as electrical resistance, size, and tactile inspection to verify their conformance to specifications., • Reads written specifications or receives oral instructions and determines work aids required and inspection procedures., • Measures wire/cable for size, and defects using micrometers and fixed gauges., • Examines wire for defects, such as pits, scratches, and burnt surfaces., • Records test results and informs supervisor when wire varies from specifications., • Respools cables according to customers specification and perform final inspections of spools., • Any other duties as assigned by supervisor.Requirements:, • Six months to one year of work experience is preferred., • Demonstrates ability to self-motivate and to problem solve in a fast-paced setting., • Excellent organizational skills and attention to detail., • Must have good documentation practice., • A proven understanding of part workmanship., • Must be capable and willing to share knowledge and train associates., • Ability to analyze data and make recommendations., • Ability to troubleshoot manufacturing defects., • Strong interpersonal skills., • Ability to seek and accept feedback from others., • While performing the duties of this job, the employee occasionally works near moving mechanical parts and is occasionally exposed to wet and/or humid conditions, ambient air, fumes or airborne particles, • The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job., • Candidate must be able to perform the physical responsibilities of the job utilizing arms, hands, and fingers to perform complex functions of manufacturing parts and performing other duties of the job; e.g., standing, sitting, walking throughout the facility and stairs, bending, squatting, and kneeling, etc., • Ability to lift items weighing 10-15 lbs. Pay: $17.00 - $17.00/ hour Benefits: Eligible after 1st day: • Paid holidays, • Medical, Dental, Vision, Basic Life/AD&D Insurance, Voluntary Term Life/AD&D Insurance, • Health Savings Account (HSA), Flexible Spending Account (FSA), Dependent Care Account, Commuter Transportation Management Account, • Vacation time, • 401(k) with Employer Match We’re proud to be an equal opportunity employer. This means we actively pursue ways to celebrate our differences and don’t discriminate based on an individual’s race (including traits historically associated with race, such as hair texture, hair type, and protective hairstyles including braids, locks, and twists), creed, national origin, nationality, religion, ancestry, age (40 or over), sex (including pregnancy), familial status, marital status, civil union or domestic partnership status, affectional or sexual orientation, gender identity or expression, mental or physical disability (including perceived disability, AIDS, and HIV status), atypical hereditary cellular or blood trait, genetic information, because of liability for service in military, status as a smoker or non-smoker, status as a registered medical marijuana user, or any unlawful criterion existing under applicable federal, state, or local laws. If you need assistance or an accommodation due to a disability, contact us at .

Job Description Salary: $78,000.00 to $85,000.00 Project Manager - Bon Secours Good Samaritan Hospital Crothall Healthcare, a Compass Healthcare company, provides specialized, high-quality, innovative, and responsive support services exclusively to the healthcare industry. Crothall serves many of the Top 100 Hospitals throughout its over 900 hospital partners across 46 states. Crothall has been recognized as one of Modern Healthcare’s Best Places to Work and Best Places to Work in Pennsylvania since 2013. Crothall has more than 32,000 team members, with core services include: Environmental Services, Patient Transportation, Patient Observation, Healthcare Facilities Management, Sterile Processing Services, and Ambulatory EVS. Learn more at . Job Summary Working as the Healthcare Project Manager you are responsible for the following: • Develop projects scope and budget, • Develop consultant scope of work documents, • Prepare and issue RFP’s/Bid Packages to consultants and contractors, • Perform bid reviews and select vendors, • Facilitate the execution of contracts between vendors and Owner including becoming familiar with contract terms and conditions, • Lead all pre-construction activities including, studies, testing, cost estimating & design, • Ensure facility design standards are maintained, • Perform technical reviews of design to ensure quality, maintainability and scope is consistent with approved budget, • Confirm that all vendors are prequalified for safety, financial history and technical qualifications, • Prepare and process all necessary documentation for PO’s & CO’s, • Coordinate construction activities between PM, plant personnel and contractor, • Facilitate access for contractors and consultants, • Lead and supervise all financial aspects of projects including budgets, commitments and actuals, • Review and approve payment applications, • Maintain change order logs, • Assist in tracing and identification of existing systems and equipment, • Coordinate equipment deliveries and track inventory, • Issue construction notices for FA & Security, • Facilitate internal construction permits: PIRA, ICRA, ILSM, Above Ceiling & Hot Work., • Retain the services of expediters and special inspection agencies and ensure that all inspections are performed, • Maintain required signage at construction site including permits, • Coordinate and maintain pedestrian closures, • Facilitate access badges to contractors, • Coordinate lock-out tag-out efforts with contractor and plant personnel including preparation of MOP’s, • Coordinate and witness pressure testing and flushing, • Coordinate pre and post, water and air flow testing and balancing, • Maintain and track construction observation punch lists, • Collect all close-out documentation including O&M’s, spare parts lists and warrantees, • Maintain construction documents in organized files and ensure all construction documents are accurately archived Qualifications • Bachelor’s degree in Engineering highly preferred, • Five years construction project management experience required, • Healthcare Project Management experience is preferred, • Detailed knowledge of engineering and construction principles, practices and procedures, applicable laws and government regulations, principles of management Apply to Crothall today! Crothall is a member of Compass Group USA Click here to Learn More about the Compass Story Associates at Crothall are offered many fantastic benefits. • Medical, • Dental, • Vision, • Life Insurance/ AD, • Disability Insurance, • Retirement Plan, • Flexible Time Off, • Holiday Time Off (varies by site/state), • Associate Shopping Program, • Health and Wellness Programs, • Discount Marketplace, • Identity Theft Protection, • Pet Insurance, • Commuter Benefits, • Employee Assistance Program, • Flexible Spending Accounts (FSAs), • Paid Parental Leave Compass Group is an equal opportunity employer. At Compass, we are committed to treating all Applicants and Associates fairly based on their abilities, achievements, and experience without regard to race, national origin, sex, age, disability, veteran status, sexual orientation, gender identity, or any other classification protected by law. Qualified candidates must be able to perform the essential functions of this position satisfactorily with or without a reasonable accommodation. Disclaimer: this job post is not necessarily an exhaustive list of all essential responsibilities, skills, tasks, or requirements associated with this position. While this is intended to be an accurate reflection of the position posted, the Company reserves the right to modify or change the essential functions of the job based on business necessity. We will consider for employment all qualified applicants, including those with a criminal history (including relevant driving history), in a manner consistent with all applicable federal, state, and local laws, including the City of Los Angeles’ Fair Chance Initiative for Hiring Ordinance, the San Francisco Fair Chance Ordinance, and the New York Fair Chance Act. We encourage applicants with a criminal history (and driving history) to apply. Certain positions may require Florida Level 2 background screening. Details: Applications are accepted on an ongoing basis. Crothall maintains a drug-free workplace. Req ID: 1517401 Crothall Healthcare Abigail Van Eman [[req_classification]]

Job DescriptionDescription: A Quality Control Technician II is responsible for ensuring that products and services meet the established standards set by the company. Duties include maintaining strong overall quality control of products made by the company adhering to reliability, performance, and customer expectation. • Performs incoming inspections of raw materials, customer supplied raw materials, returned goods and special components., • Performs finished good inspections., • Performs start-up and in process inspections., • Monitors specific areas of production as directed by the Quality Control Supervisor., • Makes measurements and records data as per inspection forms or job cards., • Performs testing and records data for statistical process control (SPC) during manufacturing, (when required)., • Communicates with Quality Control Supervisor any occurrences of non-conforming product, out of control process or any other items of concern., • Communicates with Manufacturing Engineers any occurrences of tests failing engineering limits or any other items of concern., • Performs computer set up for label printing programs on cutting lines., • Assists Engineering as needed for experimental testing., • Enters finished goods inspection data into BMS as appropriate., • Any other duties as assigned by supervisor.Requirements:, • Excellent organizational skills and attention to detail., • Must have good documentation practice., • A proven understanding of part workmanship., • Ability to handle numbers required., • Strong interpersonal skills., • Ability to use micrometer, computers, testing equipment and electronic balance is essential., • Experience using Excel is preferred., • Ability to speak, read, and write in English. Education & Experience • High school diploma or equivalent. Working Conditions • While performing the duties of this job, the employee occasionally works near moving mechanical parts and is occasionally exposed to wet and/or humid conditions, ambient air, fumes, or airborne particles., • The noise level in the work environment is usually moderate. Physical Requirements • The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job., • Candidate must be able to perform the physical responsibilities of the job utilizing arms, hands, and fingers to perform complex functions of manufacturing parts and performing other duties of the job, e.g., standing, sitting, walking throughout the facility and stairs, bending, squatting, and kneeling, etc. Benefits: Eligible after 1st day: • Paid holidays, • Medical, Dental, Vision, Basic Life/AD&D Insurance, Voluntary Term Life/AD&D Insurance, • Health Savings Account (HSA), Flexible Spending Account (FSA), Dependent Care Account, Commuter Transportation Management Account, • Vacation time, • 401(k) with Employer Match We’re proud to be an equal opportunity employer. This means we actively pursue ways to celebrate our differences and don’t discriminate based on an individual’s race (including traits historically associated with race, such as hair texture, hair type, and protective hairstyles including braids, locks, and twists), creed, national origin, nationality, religion, ancestry, age (40 or over), sex (including pregnancy), familial status, marital status, civil union or domestic partnership status, affectional or sexual orientation, gender identity or expression, mental or physical disability (including perceived disability, AIDS, and HIV status), atypical hereditary cellular or blood trait, genetic information, because of liability for service in military, status as a smoker or non-smoker, status as a registered medical marijuana user, or any unlawful criterion existing under applicable federal, state, or local laws. If you need assistance or an accommodation due to a disability, contact us at .

Job DescriptionDescription: Benefits • Sign-On Bonus on qualified experience, Discretionary Quarterly bonuses & recruiting incentives, • Company van + gas card for eligible techs, • Paid training and career advancement, • Medical, Dental, Vision + 401K match, • Opportunity within a growing organization to grow your career Position Summary The Senior Commercial HVAC Technician is responsible for performing expert-level service, maintenance, installation, and diagnostics on complex commercial HVAC systems. This role acts as a technical leader in the field, supports large-scale commercial projects, and mentors less experienced technicians. The Senior Technician ensures all work meets safety, quality, and compliance standards while providing exceptional customer service to commercial clients. Key Responsibilities • Diagnose, repair, and maintain complex commercial HVAC systems including RTUs, VAV systems, heat pumps, VRF/VRV systems, boilers, chillers, cooling towers, air handlers, and ventilation systems., • Lead advanced troubleshooting, root-cause analysis, and major component replacements., • Perform commercial system installations, start-ups, commissioning, and retrofits according to manufacturer specifications and project requirements., • Conduct detailed preventive maintenance and provide recommendations for system improvements, energy efficiency, and lifecycle upgrades., • Ensure all work adheres to company standards, project specifications, OSHA safety regulations, and local building codes., • Provide coaching, technical guidance, and on-the-job training to junior and mid-level technicians., • Work closely with dispatch, project managers, and estimators to support scheduling, work planning, and customer communication., • Build strong client relationships and communicate findings, options, and recommendations clearly and professionally., • Complete accurate documentation of service reports, time entries, parts usage, and job progress., • Maintain company tools, equipment, and service vehicle in safe operating condition. Qualifications • 10+ years of commercial HVAC service and/or installation experience required., • Strong proficiency with commercial systems including chillers, boilers, VRF/VRV, and complex control systems., • EPA Universal Certification required., • Technical school, trade certification, or completed HVAC apprenticeship highly preferred., • Ability to read and interpret commercial blueprints, plans, and control schematics., • Exceptional diagnostic skills and proven ability to resolve complex system issues independently., • Strong leadership, communication, and customer-service abilities.Requirements: Eligibility Requirements • This position requires a valid driver’s license., • Employment/education will be verified., • Applicants must be currently authorized to work in the United States on a full-time basis., • Able to work in a variety of extreme weather, hot and cold conditions., • Able to work safely in confined spaces such as attics, basements, closets, and crawl spaces., • Able to work safely at elevated heights such as rooftops, ceilings, and ladders., • Able to bend, crawl, stoop, stretch, and reach., • Able to walk on uneven surfaces., • Able to work off a ladder, sometimes at heights. CT LIC # HTG-0386317-S1 Putnam NY LIC# 31097 Westchester NY LIC # WC-33774-H21 MEC # 1093 AA/EOE

Job Description A highly advanced and customer focused global logistics company is seeking qualified candidates to design, develop and maintain business application solutions for our organization and our customers. This position will provide leadership to our business community and customers and will focus on providing quality business process driven solutions. Essential Position Functions: • Provides quality leadership and expertise for our business community and customers in the use of all applications, interfaces and automated business solutions., • Responds to and resolves all reported user issues in a prompt and quality manner., • Designs, develops and maintains automated business application solutions and related interfaces., • Works with software vendors to ensure all business requirements are met on a timely basis and all applications are running without issues., • Performs root cause analysis on applications and interfaces to ensure problems can be resolved as quickly as possible., • Designs, develops and implements EDI interfaces with business partners and customers., • Works on problems of a diverse scope while being able to address several issues at the same time., • Minimum of seven years of application development experience and responsibility of application management with strong business process optimization expertise., • Bachelor’s Degree or IT related certification., • Experience with designing, developing and implementing EDI solutions. Experience with XML and managing electronic exchange solutions., • Strong knowledge in the use of Microsoft Excel and Adobe., • Strong knowledge and experience with SQL, • Experience with MS SQL and Oracle., • Strong experience with project management., • Experience with the following applications is desired:, • Kewill Customs and TMFF Export, • ETA Air Application, • Accounting applications, • Warehouse Management, • .NET or Java experience, • Detail oriented with excellent analytical, planning, and organizational skills., • Ability to express complex technical concepts effectively, both verbally and written., • Must have excellent customer service and communication skills., • Ability to work independently with limited supervision., • Ability to work well with people from different disciplines with varying degrees of technical and business experience., • Must be accustomed to working on various issues simultaneously while ensuring quality results., • Position may requires off hours, including evenings and weekends., • Some travel, including overnight travel, will be required.

Job DescriptionCompany Description Wide World BMW, located in Spring Valley, NY has immediate opportunities for technicians to become part of the BMW Family! Job Description As a BMW Technician, you will be responsible for performing diagnoses, repairs, and maintenance work for customer and dealership vehicles. You’ll be at the forefront of innovative automotive diagnostic technologies. • Receiving and carrying-out Repair Orders as dispatched., • Performing diagnostic services and troubleshooting to determine repair needs., • Providing labor, time, and parts estimates for repair services., • Performing high quality and efficient repair services for various automotive systems, including engine, steering, suspension, brakes, and air conditioning in accordance with Center and Factory standards., • Performing Quality Control checks for repaired vehicles to ensure repairs are complete., • Completing all required paperwork and documentation for repair services., • Maintaining organized, clean workspace and accounting for dealership and personal tools at all times., • Communicating directly and efficiently with Service Advisors and Parts Department Employees., • Participating in continual BMW proprietary training/education programs to hone skills and develop expertise in industry-leading BMW automotive technologies and processes., • Demonstrating behaviors consistent with Employer's values in all interactions. You’re a passionate, skilled, and dedicated individual who is excited by the opportunity to work on The Ultimate Driving Machine. You’re highly self-motivated and detail-oriented with solid organizational and time-management skills. You’re excited about innovative technologies, ideally have previous European brand service repair experience, and are committed to Fix it Right the First Time to provide the ultimate customer experience. Qualifications • About You, • High school diploma or equivalent., • Possess great mechanical, electrical, and computing skills., • Be 18 years of age or older., • Own a valid driver’s license., • At least 2+ years previous of hands on automotive repair experience in a professional environment or equivelant., • Previous European automotive technician experience a plus, • ASE certifications a plus, • Must be authorized to work in the USA., • Must perform duties and responsibilities in a safe manner., • Must be able to demonstrate ability to pass pre-employment testing to include background check, MVR check, and maintenance of a valid driver's license. Additional Information All your information will be kept confidential according to EEO guidelines. The average Automotive Technician salary in Spring Valley, NY is $76,411 as of June 27, 2024, but the salary range typically falls between $67,077 and $84,767. Disclaimer: Salary ranges can vary widely depending on the city and many other important factors, including education, certifications, additional skills, the number of years you have spent in your profession. #automotive #technician #mechanic #BMW #ASE

Job DescriptionBenefits: • 401(k) matching, • Bonus based on performance, • Dental insurance, • Employee discounts, • Free uniforms, • Health insurance, • Paid time off Responsibilities As a Midas automotive technician, youll be exposed to and have responsibility for performing a wide range of diagnostics, repairs and maintenance, including: • Diagnostics using state-of-the-art computer systems, • Tires and tire repair, • Car heating and air conditioning, • Steering and suspension, • Belts and hoses, • Radiator and engine cooling systems, • Batteries, starting and charging, • Steering and suspension, • Brakes and brake repair, • Oil changes, • Check engine light, • Mufflers and exhaust services, • Visual safety and courtesy inspectionsQualifications, • Ability to repair vehicles independently, while also having experience working well in a team environment, • Knowledge in automotive brakes, exhaust, suspension, & engine diagnostics, • Track record of high personal productivity, • Knowledge of, and adherence to, safety and environmental standards for repair facilities, • Experience using shop equipment such as lifts, tire changing equipment, alignment machines and scan tools, • High School Diploma or equivalent - technical degree a definite plus, • State-specific auto repair certifications, • Valid drivers license, • Own tools/equipment (diagnostic scanner / tools preferred also), • Able to service both foreign and domestic vehicles

Job Description GENERAL PURPOSE OF JOB: The General Manager is responsible for ensuring that the center is run according to the required K1 standards. The General Manager also holds their Salaried and Hourly Staff accountable along with developing them to the next levels. ESSENTIAL DUTIES AND RESPONSIBILITIES: • Staffing duties including: recruiting, interviewing, hiring, training, disciplining, and terminating, • Ensure facility complies with all OSHA guidelines as required in their location (varies from state to state), • Cash handling duties including preparation of tills, change fund maintenance, and preparation of deposits, • Ensure State Health inspection guidelines are completed, and in compliance with state regulations, • Ensure all State and Federal Permits and Licenses for the facility are up to date and in compliance, • Ensure Alcohol ordinance for your state is followed, to include retention of staff permits in accordance with State and Federal regulations., • Complete monthly retention of all work-related documentation, • Provide Corporate with all company invoices, to include all vendors, • Ensuring that cashier personnel adhere to correct cash handling procedures and sell effectively, • Ensuring that track personnel run races safely, efficiently and professionally, • Complete Manager Objectives each day as required in the companies Intranet, • Ensuring that mechanic personnel maintain our karts in peak working condition, • Ensuring that all staff are strictly adhering to company policies and providing outstanding customer service, • Corresponding with and providing regular reports to corporate office personnel, • Expanding the marketing and promotional presence of K1 Speed, • Maintaining the effective operational feasibility of the center, • Maintaining the highest standard of facility appearance, • Oversees the day- to-day operations within the policies and guidelines set forth by K1 Speed., • Identify on a regular basis their opportunities and creates an action plan to increase the performance level to the required K1 standard, • Ensures that their location has the proper staffing level to maximize the employee and guest experience., • Over sees weekly inventories of each location per company standards., • Maintain a professional K1 image including the Paddock lounge cleanliness, proper uniforms and appearance standards., • Ensures their location is keeping food cost, part costs and labor costs (hours) at or below K1 acceptable standards., • Ensures their location is consistently following the guidelines for private party events, • Provide timely information to sales team and Director or sales in-order to help book parties., • Understands and makes sure that each management team member follows all cash handling procedures including safe maintenance, deposits and all banking functions., • Responds to customer service needs to provide the highest standards of service within 24hours., • Executes weekly and monthly Marketing promotions to build the brand and generate revenue., • Works with their Team to review scheduling and effectiveness of all Marketing promotional hours and outings SKILLS AND ABILITIES: • Job Knowledge – Able to learn new skills and maintain up-to-date job-related information. Applies technical and procedural know-how to get the job done; understands job duties and responsibilities., • Initiative – Takes initiative versus waiting for direction. Results and goal oriented. Desires to excel on the job. Demonstrates self-confidence and positive attitude., • Professionalism – Consistently treats individuals with dignity and respect, recognizing the importance of cultural differences. Has and maintains a positive sense of humor and uses humor and uses humor appropriately. Embraces, communicates, and demonstrates company values and ethics. Maintains reasonable expectations of self and others when balancing time and performance demands with personal and professional needs., • Planning and Organizing – Develops realistic plans, setting reasonable completing times. Effectively uses time and resources. Prioritizes duties in a manner consistent with organizational objectives and emergencies., • Team Work/Cooperation – Successfully works with others to achieve desired results. Helps prevent/resolve conflicts. Develops positive working relationship with all people. Promotes mutual respect. Being pleasant with others on the job and displaying a good-natured cooperative attitude to bring teams of people together. Is flexible/open minded., • Critical Thinking – Using logic and reasoning to identify the strengths and weaknesses of alternative solutions, conclusions or approaches to problems. Overcomes obstacles. Helps team solve problems., • Productivity – Takes on additional responsibilities as needed. Manages priorities. Develops and follows work procedures., • Active Learning – Understanding the implications of new information for both current and future problem-solving and decision making. The ability to accept criticism and stay calm under pressure., • Communication – Communicating in a professional and empathetic way so employees understand what is expected of them. Effectively conveys and receives ideas, information and directions. Demonstrates good verbal and written communication. Paying attention to what people are saying, taking time to understand the points being made, asking questions as appropriate, and not interrupting at inappropriate times, • Customer Orientation – Listens, identifies, and responds, quickly and effectively to internal and external customers’ needs and sets work activities accordingly. Goes beyond what is expected and follows up to ensure customer satisfaction., • Work Quality – Demonstrates accuracy, thoroughness, and attention to detail., • Decision Making – Take calculated risks, make timely/responsive decisions. Modifies decisions based on new information, and takes ownership of the outcomes of each decision made., • Adaptability/Flexibility – Demonstrates judgment and willingness to make exceptions. Initiates or accepts changes in the process, while maintaining focus on the task/issue. Transitions effectively between multiple tasks on priorities. Meeting the needs of each customer without compromising the brand/business. EDUCATION and/or EXPERIENCE: High school diploma required Associates in Business or Hospitality preferred. Must be at least 21 years of age. Must have 5 plus years of Food and Beverage experience unless internal candidate Must have 7 years previous management experience with a successful track record, preferably in restaurant, entertainment or hospitality. PHYSICAL DEMANDS: This position requires that weight be lifted, pushed, pulled, safely for extended periods of time. Must be able to lift up to 100lbs with reasonable accommodation. WORK ENVIRONMENT: The work environment for this job typically has a high level of noise. The work will be performed predominantly indoors, however, things such as marketing events can be exposed to the outdoor elements. SUPERVISORY RESPONSIBILITIES: Responsible for managing several salaried and hourly employees. EQUAL OPPORTUNITY STATEMENT: K1 Speed is an equal employment opportunity employer and is committed to providing equal employment opportunity for all applicants and employees. K1 Speed does not unlawfully discriminate on the basis of race, color, ancestry, religion (including religious dress and grooming standards), sex (including pregnancy, childbirth or related medical conditions, breastfeeding or related medical conditions), gender (including a person’s gender identity, gender expression, and gender related appearance and behavior, whether or not stereotypically associated with the person’s assigned sex at birth), age, national origin, sexual orientation, medical condition, marital status (including domestic partnership status), physical disability, mental disability, medical condition, genetic information, denial of medical and family care leave, Civil Air Patrol status, military and veteran status, or other legally protected characteristics. K1 Speed prohibits harassment of any individual on any of the bases listed above.