Trabajos citizen en Garden City, New YorkCrear alertas

A MISSION WORTHY OF A CAREER! If you’re looking for “just a job,” then stop reading right now. But, if you’re looking for a long-term federal law enforcement career, one that makes a difference every day to our country and its citizens, then the U.S. Border Patrol (USBP) would like you to take the first step to becoming an entry level Border Patrol Agent. USBP is hiring immediately to fill full-time, entry-level, career positions in federal law enforcement where your prior experience in public safety, security, military police or law enforcement may qualify. Train and work with an elite team of professionals whose camaraderie, pride, and sense of purpose are hallmarks of their daily mission of protecting America. Now is the time to make your move because, along with excellent base pay, exceptional benefits, and job stability, USBP is offering up to $60,000 in additional incentives (see details below). Salary and Benefits Annual Base Salary for newly appointed BPAs varies per grade, as follows: Newly appointed Border Patrol Agents (as defined in 5 CFR 575.102) will be offered up to a $20,000 incentive. The first $10,000 will be paid upon successful completion of the Border Patrol Academy, with the remaining $10,000 awarded for accepting a prioritized location. Prioritized locations include Sierra Blanca, TX; Presidio, TX; Sanderson, TX; Comstock, TX; Lordsburg, NM; Freer, TX; Hebbronville, TX; Ajo, AZ. Newly appointed Border Patrol Agents may also qualify for up to $40,000 in additional incentives distributed over their first four years. Duty Locations IMPORTANT NOTICE: Duty assignments available at the time of offer may include the Southwest Border, including prioritized locations. U.S. Border Patrol determines duty assignments at the time of offer based on operational needs, which may or may not align with candidates’ first-choice preferences. RELOCATION MAY BE REQUIRED. Duty location impacts pay rates; locality pay for federal law enforcement is higher in some locations than others. A fully trained BPA may be eligible for up to an additional 25% of base pay per the BPA Pay Reform Act of 2014. This is a career ladder position with a grade level progression of GL-5, GL-7, GL-9, GS-11, and GS-12. You will be eligible for a promotion to the next higher grade level (without reapplying) once you successfully complete 52 weeks in each grade level. Duty Locations: You will be asked to select your preferred location for one of the following mission critical locations: • Big Bend Sector Stations - *Presidio, Van Horn, *Sanderson, Alpine, *Sierra Blanca, Marfa, • Buffalo Sector Stations - Wellesley Island, • Del Rio Sector Stations - Del Rio, Brackettville, *Comstock, Eagle Pass North, Eagle Pass South, Carrizo Springs, Uvalde, • El Paso Sector Stations - Alamogordo, Clint, Deming, El Paso, Fort Hancock, Las Cruces, *Lordsburg, Santa Teresa, Ysleta, • El Centro Sector Stations - El Centro, Indio, Calexico, • Grand Forks Sector Stations - Pembina, • Havre Sector Stations - Havre, Malta, Plentywood, Scobey, Sweetgrass, • Houlton Sector Stations - Calais, Fort Fairfield, Jackman, Rangeley, Van Buren, • Laredo Sector Stations - Laredo South, Cotulla, *Hebbronville, Laredo West, *Freer, Laredo North, Zapata, • Rio Grande Valley Sector Stations - Rio Grande City, Fort Brown, McAllen, Brownsville, Falfurrias, Weslaco, Kingsville, Harlingen, • San Diego Sector Stations - Boulevard, Brownfield, Campo, Chula Vista, Imperial Beach, Murrieta, San Clemente, • Spokane Sector Stations - Colville, Curlew, Metaline Falls, Oroville, • Swanton Sector Stations - Beecher Falls, Burke, Champlain, Newport, Richford, • Tucson Sector Stations - *Ajo, Tucson, Nogales, Douglas, Brian A Terry, Sonoita, Casa Grande, Three Points Substation, Willcox As a BPA, you will be part of our 60,000+ workforce that strives to protect the American people by safeguarding our borders, deterring illicit activity, and enhancing the nation’s economic prosperity. Being a BPA makes you a valuable member of the Federal Law Enforcement Officer (LEO) profession. Typical assignments include: • Detecting and questioning people suspected of violating immigration and custom laws and inspecting documents and possessions to determine citizenship or violations, • Preventing and apprehending undocumented noncitizens and smugglers of noncitizens at or near the borders by maintaining surveillance from covert positions to include using infrared scopes during night operations, • Interpreting and following tracks, marks, and other physical evidence of illegal entry of persons or contraband, • Performing farm checks, building checks, traffic checks, city patrols, and transportation checks You qualify for the GL-5 grade level if you possess one of the following: Experience: One (1) year of general work experience that demonstrates the ability to take charge, make sound decisions, and maintain composure in stressful situations; to learn regulations, methods, and techniques through classroom training and/or on-the-job instruction; and the ability to gather concise information through questioning, observation, and examination of documents and records; OR Education Substitution: A bachelor's degree or successful completion of a full four-year course of study in any field leading to a bachelor's degree from an accredited college or university; OR Combination of Experience and Education: A combination of general work experience AND successfully completed college education. This will be calculated using your resume and official or unofficial transcripts submitted with your application. You qualify for the GL-7 grade level if you possess one of the following: Experience: One year of specialized work experience that shows you have the skills necessary to: • Make sound judgments and decisions in the use of firearms., • Deal effectively with people in a courteous and tactful manner in connection with law enforcement matters. Education Substitution for the GL-7 grade level: A bachelor's degree with superior academic achievement, which is based on (1) class standing, (2) grade-point average (i.e., GPA of 3.0 or higher out of a possible 4.0), or (3) honor society membership. Or will receive a bachelor's degree with Superior Academic Achievement. Or one full year of graduate-level education in a field of study related to law enforcement (e.g., criminal justice, homeland security, justice studies, law enforcement, courts and judicial systems, forensic technology, forensic psychology, or corrections and rehabilitation) from an accredited college or university; OR A Combination of Experience and Education: This will be calculated using your resume and official or unofficial transcripts submitted with your application. Note: If you have previous or current law enforcement or military law enforcement experience, you may qualify at the GL-9 and or GS-11 grade level. Please refer to the BPA GL-9 - 11 announcement. Other Requirements Citizenship: You must be a U.S. Citizen to apply for this position. Residency: You must have had primary U.S. residency (includes protectorates as declared under international law) for at least three of the last five years. Age Restriction: In accordance with Public Law 100-238, this position is covered under law enforcement retirement provisions. Candidates must be referred for selection to the Border Patrol Agent position before reaching their 40th birthday in accordance with Department of Homeland Security Directive 251-03. The age restriction may not apply if you are currently serving or have previously served in a federal civilian law enforcement (non-military) position covered by Title 5 U.S.C. 8336(c) or Title 5 U.S.C. 8412(d). Veterans’ Preference: You may also be eligible for an excepted service Veterans Recruitment Appointment (VRA). The age restriction does not apply if you are Veterans' Preference eligible. Formal Training: After you are hired, you will be detailed to the U.S. Border Patrol Academy in Artesia, New Mexico, for approximately six (6) months of intensive instruction in immigration and nationality laws, law enforcement and USBP-specific operations, driver training, physical techniques, firearms, and other courses. Border Patrol work requires the ability to speak and read Spanish, as well as English. Border Patrol Agents will be provided training to become proficient with the Spanish language at the Academy. How to Apply: Click the Apply button on this site. You will be linked to the CBP Talent Network registration page. For Position of Interest, select Border Patrol Agent, then complete the pre-screening questions. You’ll then receive a link(s) to the BPA Job Opening Announcements (JOAs) on USAJOBS, the federal government’s official employment site, to complete your application. Be certain to review ALL details of the job opportunity announcement and follow all instructions in the application process, including items (resume, transcripts, etc.) to submit. You will be evaluated based on your resume, supporting documents, and the BPA Entrance Exam. If you have questions about the application process, contact a recruiter through the U.S. Border Patrol page: careers.cbp.gov/s/usbp. As a subscriber to the CBP Talent Network, you’ll receive monthly emails with information about webinars, career expos, and future opportunities with CBP.

Job Description CNC Machine Maintenance Engineer - Massapequa, NY About our Client: Our Client is a global provider within a wide range of areas, including but not limited to aerospace and defense platforms, automation and manufacturing, and the medical and healthcare fields, all aiming toward advancing cutting-edge research and development. Higher Talent Group values its reputation for finding high-quality people, which is why we will conduct a screening to determine if this is a good fit for you. We will share further details such as the culture, how progression works within the company, etc. SUMMARY OF POSITION The CNC Machine Maintenance Engineer position is responsible for performing highly diversified duties to install, troubleshoot, repair, and maintain production and facility equipment according to safety, predictive, and productive maintenance systems and processes to support the achievement of the site’s business goals and objectives. ESSENTIAL DUTIES AND RESPONSIBILITIES The essential duties and responsibilities of this position are listed below. This list is not all-inclusive and may be amended from time to time. • Perform highly diversified duties to install and maintain production machines and the plant facility’s equipment., • Provide emergency/unscheduled repairs of production equipment during production and perform scheduled maintenance repairs of production equipment during machine service. Must have experience with Vacuum Braze Ovens., • Perform simple machinist duties and responsibilities., • Perform mechanical skills, including, but not limited to, mechanical, electrical, pneumatic, hydraulic, troubleshooting, and repair of production machines., • Read and interpret equipment manuals and work orders to perform required maintenance and service., • Diagnose problems, replace or repair parts, test, and make adjustments., • Perform regular preventive maintenance on machines, equipment, and plant facilities., • Perform a variety of plumbing maintenance and carpentry functions., • Use a variety of hand and power tools, electric meters, and material handling equipment in performing duties., • Detect faulty operations, defective material, and report those and any unusual situations to proper supervision., • Comply with safety regulations and maintain clean and orderly work areas. QUALIFICATIONS, KNOWLEDGE, SKILLS, AND EXPERIENCE REQUIRED • Technical Capacity., • Good Troubleshooting Ability., • Ethical Conduct., • Communication Proficiency., • Results Driven., • Initiative., • Valid Driver’s License., • Experience with the maintenance of CNC Machines or Vacuum Braze Ovens EDUCATION AND/OR EXPERIENCE • High school diploma/GED and completion of a craft apprenticeship, or an equivalent number of years of education and production maintenance experience., • 2+ years of manufacturing experience; some hydraulic, pneumatic, mechanical, and industrial skills with PLC experience, Industrial and Commercial electric, and HVAC., • AA in mechanical or electrical Engineering or a Certificate in Analytical Troubleshooting preferred. 5+ years in manufacturing/facilities maintenance preferred. PHYSICAL DEMANDS • While performing the duties of this job, the employee is regularly required to talk and hear. This position is very active and requires standing, walking, bending, kneeling, stooping, crouching, crawling, and climbing all day. The employee must frequently lift and/or move items over 50 pounds., • Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Fine manipulation and repetitive motion may be required for some duties. OTHER • Due to contracts with the United States Government, the candidate must be either a U.S. citizen or a Green card holder. COMPENSATION The anticipated salary range for this position is $110,000 to $125,000 annually. This range reflects the base salary for candidates who meet the requirements of the role, including experience, education, and location. Salary Disclaimer: Where a specific pay range is noted, it is a good-faith estimate only. At the time of this posting, the actual salary offered will be based on experience, skills, qualifications, market/business considerations, and geographic location. BENEFITS • Medical Plan, • Telehealth, • Prescription Drug Program, • Employee Assistance Program (EAP), • Dental Plan, • Vision Plan, • Retirement Plan with company match, • Paid Time Off, • Health Savings Account and/or Flexible Spending Accounts, • Life and AD&D Insurance, • Disability Insurance (Short and Long Term offerings) NOTE The above is presented as a matter of occupational information and guidance only; all other reasonable tasks, duties, and responsibilities that management may deem necessary for satisfactory performance may be included. ABOUT HIGHER TALENT GROUP Higher Talent Group offers candidates full-time opportunities at companies hiring nationwide. We also provide resume and career coaching services for individuals who require assistance in getting back into the workforce or for candidates who want to start looking for a new opportunity discreetly. Want to learn more? Check out our website for additional information.

Border Patrol Agent (BPA) – in the Federal Security and Public Safety Sector Experienced (GL-9 GS-11) SAME MISSION, NEW DRIVE! You love protecting your community and doing your part to keep our nation safe. But maybe you’re looking for a change of scenery? USBP is hiring immediately for full-time, career positions, where your prior law enforcement officer (LEO) experience may qualify you for higher-graded Border Patrol Agent (BPA) opportunities. Continue making a difference with the nation's premier federal agency charged with securing our borders and protecting our country. Whether you gained this experience as part of a military police unit or as a member of a state or local law enforcement organization, you have an opportunity to work with highly trained professionals whose camaraderie, pride, and purpose are hallmarks of their daily mission. Check out the duties and responsibilities section below, along with the qualifications section to see if you are eligible. Now is the time to make your move, along with excellent base pay, location pay, exceptional benefits, and job stability, USBP is offering up to $60,000 in additional incentives to newly appointed Agents (see details below). DON’T FORGET TO CHECK OUT THE INCENTIVES – SEE SALARY SECTION BELOW IMPORTANT NOTICE: Duty assignments available at the time of offer may include the Southwest Border, including prioritized locations. U.S. Border Patrol determines duty assignments at the time of offer based on operational needs, which may or may not align with candidates’ first-choice preferences. Relocation may be required. U.S. Customs and Border Protection (CBP) is hiring immediately for these full-time, career Law Enforcement Officer (LEO) opportunities. Salary and Benefits: Salary for newly appointed law enforcement Border Patrol Agents varies from: Base Salary: GL-9/GS-11, $63,148 - $120,145 per year Locality Pay: Varies by duty location. Overtime Pay: Up to 25% Duty location impacts pay rates; locality pay for federal law enforcement is higher in some locations than others. A fully trained BPA may be eligible for up to an additional 25% of base pay per the BPA Pay Reform Act of 2014. This is a career ladder position with a grade level progression from GL-9 to GS-11 to GS-12. You will be eligible for a promotion to the next higher grade level (without re-applying) once you successfully complete 52 weeks in the lower grade level. All Border Patrol Agents may select from an array of federal employment benefits that include health and insurance plans, a generous annual and sick leave program, and participation in the Thrift Savings Plan, a retirement plan that is similar to traditional and ROTH 401(k) offerings. Newly appointed Border Patrol Agents (as defined in 5 CFR 575.102 ) will be offered up to a $20,000 incentive. The first $10,000 will be paid upon successful completion of the Border Patrol Academy, with the remaining $10,000 awarded for accepting a prioritized location. Prioritized locations include Sierra Blanca, TX; Presidio, TX; Sanderson, TX; Comstock, TX; Lordsburg, NM; Freer, TX; Hebbronville, TX; Ajo, AZ. Newly appointed Border Patrol Agents may also qualify for up to $40,000 in additional incentives distributed over their first four years. Duty Locations: You will be asked to select your preferred location for one of the following mission critical locations: Big Bend Sector Stations - *Presidio, Van Horn, *Sanderson, Alpine, *Sierra Blanca, Marfa Buffalo Sector Stations - Wellesley Island Del Rio Sector Stations - Del Rio, Brackettville, *Comstock, Eagle Pass North, Eagle Pass South, Carrizo Springs, Uvalde El Paso Sector Stations - Alamogordo, Clint, Deming, El Paso, Fort Hancock, Las Cruces, *Lordsburg, Santa Teresa, Ysleta El Centro Sector Stations - El Centro, Indio, Calexico Grand Forks Sector Stations - Pembina Havre Sector Stations - Havre, Malta, Plentywood, Scobey, Sweetgrass Houlton Sector Stations - Calais, Fort Fairfield, Jackman, Rangeley, Van Buren Laredo Sector Stations - Laredo South, Cotulla, *Hebbronville, Laredo West, *Freer, Laredo North, Zapata Rio Grande Valley Sector Stations - Rio Grande City, Fort Brown, McAllen, Brownsville, Falfurrias, Weslaco, Kingsville, Harlingen San Diego Sector Stations - Boulevard, Brownfield, Campo, Chula Vista, Imperial Beach, Murrieta, San Clemente Spokane Sector Stations - Colville, Curlew, Metaline Falls, Oroville Swanton Sector Stations - Beecher Falls, Burke, Champlain, Newport, Richford Tucson Sector Stations - *Ajo, Tucson, Nogales, Douglas, Brian A Terry, Sonoita, Casa Grande, Three Points Substation, Willcox Yuma Sector Stations - Blythe, Yuma, Wellton Duties and Responsibilities: As a BPA, you will be part of our 60,000+ workforce that strives to protect the American people by safeguarding our borders, deterring illicit activity, and enhancing the nation’s economic prosperity. Being a BPA makes you a valuable member of the Federal Law Enforcement Officer (LEO) profession. Typical assignments include: Detecting and questioning people suspected of violating immigration and customs laws and inspecting documents and possessions to determine citizenship or violations. Preventing and apprehending aliens and smugglers of aliens at or near the borders by maintaining surveillance from covert positions to include using infrared scopes during night operations. Interpreting and following tracks, marks, and other physical evidence of illegal entry of persons or contraband. Performing farm checks, building checks, traffic checks, city patrols, and transportation checks. Patrolling the international boundary and coastal waterways using a variety of government assets such as vehicles, horses, vessels, watercraft, off-road vehicles, ATVs, snowmobiles, and motorcycles for the accomplishment of the USBP Mission. Qualifications: GL-9: You qualify for the GL-9 grade level if you possess one (1) year of specialized experience, equivalent to at least the next lower grade level, performing duties such as: Performing physical searches of detained individuals, their vehicles, and their immediate surroundings for weapons, contraband, currency, and other evidence. Apprehending, physically restraining, or working with law enforcement officials to identify or apprehend violators of state, federal, or immigration laws. Proficient in the use of firearms, preparing investigative reports, serving court orders (e.g., warrants, subpoenas, etc.), and gathering evidence for criminal cases prosecuted through the court system. If you have previous or current law enforcement or military law enforcement experience, you may qualify at the GS-11 grade level. GS-11: You qualify for the GS-11 grade level if you possess one year of specialized experience equivalent to at least the next lower grade level, with the authority granted by the state or government to enforce laws, make arrests, and investigate crimes, performing primary duties in an official law enforcement capacity such as: Utilizing intelligence information to track illegal operations, criminal activity, threats to our nation, and/or contraband while serving as a state, federal, or military law enforcement official. Leading investigations of fraud, contraband, criminal activity, threats to our nation, and/or illegal operations to determine sources and patterns while serving as a state, federal, or military law enforcement official. Apprehending violators of state, federal, or immigration laws by utilizing various forms of complex technology that include surveillance, detection, situation awareness systems, and/or communications equipment. The above experience will be applied in connection with the following: Make arrests and exercise sound judgment in the use of firearms; deal effectively with people in a courteous manner in connection with law enforcement matters; analyze information rapidly and make prompt decisions; or develop and maintain contact with a network of informants. There are no education substitutions for the GL-9 or GS-11 grade-level Border Patrol Agent opportunities. Other Requirements: Citizenship: You must be a U.S. Citizen to apply for this position. Residency: You must have had primary U.S. residency (including protectorates as declared under international law) for at least three of the last five years. Age Restriction: In accordance with Public Law 100-238, this position is covered under law enforcement retirement provisions. Candidates must be referred for selection to the Border Patrol Agent position before reaching their 40th birthday in accordance with Department of Homeland Security Directive 251-03. The age restriction may not apply if you are currently serving or have previously served in a federal civilian law enforcement (non-military) position covered by Title 5 U.S.C. 8336(c) or Title 5 U.S.C. 8412(d). Veterans’ Preference: You may also be eligible for an excepted service Veterans’ Recruitment Appointment (VRA). The age restriction does not apply if you are Veterans' Preference eligible. Formal Training: After you are hired, you will be detailed to the U.S. Border Patrol Academy in Artesia, New Mexico, for approximately six (6) months of intensive instruction in immigration and nationality laws, law enforcement, and USBP-specific operations, driver training, physical techniques, firearms, and other courses. Border Patrol work requires the ability to speak and read Spanish, as well as English. Border Patrol Agents will be provided training to become proficient in the Spanish language at the Academy. How to Apply: Click the Apply button on this site. You will be linked to the CBP Talent Network registration page. For Position of Interest, select Border Patrol Agent, and then complete the pre-screening questions. You’ll then receive a link(s) to the BPA Job Opening Announcements (JOAs) on USAJOBS, the federal government’s official employment site, to complete your application. Be certain to review ALL details of the job opportunity announcement and follow all instructions in the application process, including items (resume, transcripts, etc.) to submit. You will be evaluated based on your resume, supporting documents, and the BPA Entrance Exam. If you have questions about the application process, contact a recruiter through the U.S. Border Patrol page: careers.cbp.gov/s/usbp. NOTE: As a subscriber to the CBP Talent Network, you’ll receive monthly emails with information about webinars, career expos, and future opportunities with CBP.

Position Summary: Operate and set-up CNC and conventional equipment for the manufacture of aerospace products. Duties and Responsibilities: • Set-Up and operate vertical milling machines and/or horizontal milling machines., • Set Up and run conventional milling machine., • Machine detail parts and final assemblies from the engineering drawings and methodsheets using fixtures and drill jogs., • Work to close tolerance (+/- .0005), • Other duties as assigned. Required Qualifications / Education /Experience: • High School degree or GED Certificate, • Minimum 5 years CNC/conventional experience., • First piece inspection, • Ability to read blueprints., • Ability to edit programs and follow instructions, setups, and method sheets. Physical Requirements: • Ability to lift up to 35 lbs. Other: Due to contracts with the United States Government, the candidate must be either a US Citizen or Green card holder. The Hughes-Treitler Business Unit designs and manufactures state of the art plate-fin heat exchangers, cold plates, condensers, evaporators, and other heat transfer products. We provide custom design and engineering services, to high quality manufacturing standards, for the aircraft, engine and industrial heat exchangers in the mobile/marine/avionics/space and missile markets. Compensation Employee Type: Hourly Salary Minimum: $50,000 Salary Maximum: $80,000 Incentive: No Disclaimer: Where a specific pay range is noted, it is a good faith estimate at the time of this posting. The actual salary offered will be based on experience, skills, qualifications, market / business considerations, and geographic location. For more information on AMETEK's competitive benefits, please click here. AMETEK, Inc. is a leading global provider of industrial technology solutions serving a diverse set of attractive niche markets with annual sales over $7.5 billion. AMETEK is committed to making a safer, sustainable, and more productive world a reality. We use differentiated technology solutions to solve our customers' most complex challenges. We employ 22,000 colleagues, in 35 countries, that are grounded by our core values: Ethics and Integrity, Respect for the Individual, Inclusion, Teamwork, and Social Responsibility. AMETEK is a component of the S&P 500. Visit for more information. We are an Equal Opportunity Employer and do not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, and basis of disability or any other federal, state or local protected class. Individuals who need a reasonable accommodation because of a disability for any part of the employment process should call 1 (866) 263-8359. Nearest Major Market: Long Island Nearest Secondary Market: New York City

February 2026 Update GL-5/7 grade levels Border Patrol Agent (BPA) – in the Federal Security and Public Safety Sector (Entry Level) A MISSION WORTHY OF A CAREER! If you’re looking for “just a job,” then stop reading right now. But, if you’re looking for a long-term federal law enforcement career, one that makes a difference every day to our country and its citizens, then the U.S. Border Patrol (USBP) would like you to take the first step to becoming an entry level Border Patrol Agent. USBP is hiring immediately to fill full-time, entry-level, career positions in federal law enforcement where your prior experience in public safety, security, military police or law enforcement may qualify. Train and work with an elite team of professionals whose camaraderie, pride, and sense of purpose are hallmarks of their daily mission of protecting America. Now is the time to make your move because, along with excellent base pay, exceptional benefits, and job stability, USBP is offering up to $60,000 in additional incentives (see details below). Salary and Benefits Annual base salary for newly appointed BPAs varies per grade, as follows: GL-5/GL-7 $51,632 - $92,219 per year. Border Patrol Agents are eligible to select from an array of federal employment benefits that include health, dental and other insurance plans, a generous annual and sick leave program, and participation in the Thrift Savings Plan, a retirement plan akin to a traditional ROTH 401(k) offering. Newly appointed Border Patrol Agents (as defined in 5 CFR 575.102) will be eligible for up to $20,000 in incentives. The first $10,000 will be paid upon successful completion of the Border Patrol Academy, with the remaining $10,000 awarded for accepting a prioritized location such as Sierra Blanca, Presidio, Sanderson, Comstock, Freer or Hebbronville, TX; Lordsburg, NM; or Ajo, AZ. Newly appointed Border Patrol Agents may also qualify for up to $40,000 in additional incentives distributed over their first four years. Duty Locations IMPORTANT NOTICED: Duty assignments available at the time of offer may include the Southwest Border, including prioritized locations. U.S. Border Patrol determines duty assignments at the time of offer based on operational needs, which may or may not align with candidates’ first-choice preferences. RELOCATION MAY BE REQUIRED. Duty location impacts pay rates; locality pay for federal law enforcement is higher in some locations than others. A fully trained BPA may be eligible for up to an additional 25% of base pay per the BPA Pay Reform Act of 2014. This is a career ladder position with a grade level progression of GL-5, GL-7, GL-9, GS-11, and GS-12. You will be eligible for a promotion to the next higher grade level (without reapplying) once you successfully complete 52 weeks in each grade level. Duty Locations: You will be asked to select your preferred location for one of the following mission critical locations:> • Big Bend Sector Stations - *Presidio, Van Horn, *Sanderson, Alpine, *Sierra Blanca, Marfa, • Buffalo Sector Stations - Wellesley Island, • Del Rio Sector Stations - Del Rio, Brackettville, *Comstock, Eagle Pass North, Eagle Pass South, Carrizo Springs, Uvalde, • El Paso Sector Stations - Alamogordo, Clint, Deming, El Paso, Fort Hancock, Las Cruces, *Lordsburg, Santa Teresa, Ysleta, • El Centro Sector Stations - El Centro, Indio, Calexico, • Grand Forks Sector Stations - Pembina, • Havre Sector Stations - Havre, Malta, Plentywood, Scobey, Sweetgrass, • Houlton Sector Stations - Calais, Fort Fairfield, Jackman, Rangeley, Van Buren, • Laredo Sector Stations - Laredo South, Cotulla, *Hebbronville, Laredo West, *Freer, Laredo North, Zapata, • Rio Grande Valley Sector Stations - Rio Grande City, Fort Brown, McAllen, Brownsville, Falfurrias, Weslaco, Kingsville, Harlingen, • San Diego Sector Stations - Boulevard, Brownfield, Campo, Chula Vista, Imperial Beach, Murrieta, San Clemente, • Spokane Sector Stations - Colville, Curlew, Metaline Falls, Oroville, • Swanton Sector Stations - Beecher Falls, Burke, Champlain, Newport, Richford, • Tucson Sector Stations - *Ajo, Tucson, Nogales, Douglas, Brian A Terry, Sonoita, Casa Grande, Three Points Substation, Willcox As a BPA, you will be part of our 60,000+ workforce that strives to protect the American people by safeguarding our borders, deterring illicit activity, and enhancing the nation’s economic prosperity. Being a BPA makes you a valuable member of the Federal Law Enforcement Officer (LEO) profession. Typical assignments include: • Detecting and questioning people suspected of violating immigration and custom laws and inspecting documents and possessions to determine citizenship or violations, • Preventing and apprehending undocumented noncitizens and smugglers of noncitizens at or near the borders by maintaining surveillance from covert positions to include using infrared scopes during night operations, • Interpreting and following tracks, marks, and other physical evidence of illegal entry of persons or contraband, • Performing farm checks, building checks, traffic checks, city patrols, and transportation checks You qualify for the GL-5 grade level if you possess one of the following: Experience: One (1) year of general work experience that demonstrates the ability to take charge, make sound decisions, and maintain composure in stressful situations; to learn regulations, methods, and techniques through classroom training and/or on-the-job instruction; and the ability to gather concise information through questioning, observation, and examination of documents and records;OR Education Substitution: A bachelor's degree or successful completion of a full four-year course of study in any field leading to a bachelor's degree from an accredited college or university; OR Combination of Experience and Education: A combination of general work experience AND successfully completed college education. This will be calculated using your resume and official or unofficial transcripts submitted with your application. You qualify for the GL-7 grade level if you possess one of the following: Experience: One year of specialized work experience that shows you have the skills necessary to: • Make sound judgments and decisions in the use of firearms., • Deal effectively with people in a courteous and tactful manner in connection with law enforcement matters. Education Substitution for the GL-7 grade level: A bachelor's degree with superior academic achievement, which is based on (1) class standing, (2) grade-point average (i.e., GPA of 3.0 or higher out of a possible 4.0), or (3) honor society membership. Or will receive a bachelor's degree with Superior Academic Achievement. Or one full year of graduate-level education in a field of study related to law enforcement (e.g., criminal justice, homeland security, justice studies, law enforcement, courts and judicial systems, forensic technology, forensic psychology, or corrections and rehabilitation) from an accredited college or university; OR A Combination of Experience and Education: This will be calculated using your resume and official or unofficial transcripts submitted with your application. Note: If you have previous or current law enforcement or military law enforcement experience, you may qualify at the GL-9 and or GS-11 grade level. Please refer to the BPA GL-9 - 11 announcement. Other Requirements Citizenship: You must be a U.S. Citizen to apply for this position. Residency: You must have had primary U.S. residency (includes protectorates as declared under international law) for at least three of the last five years. Age Restriction: In accordance with Public Law 100-238, this position is covered under law enforcement retirement provisions. Candidates must be referred for selection to the Border Patrol Agent position before reaching their 40th birthday in accordance with Department of Homeland Security Directive 251-03. The age restriction may not apply if you are currently serving or have previously served in a federal civilian law enforcement (non-military) position covered by Title 5 U.S.C. 8336(c) or Title 5 U.S.C. 8412(d). Veterans’ Preference: You may also be eligible for an excepted service Veterans Recruitment Appointment (VRA). The age restriction does not apply if you are Veterans' Preference eligible. Formal Training: After you are hired, you will be detailed to the U.S. Border Patrol Academy in Artesia, New Mexico, for approximately six (6) months of intensive instruction in immigration and nationality laws, law enforcement and USBP-specific operations, driver training, physical techniques, firearms, and other courses. Border Patrol work requires the ability to speak and read Spanish, as well as English. Border Patrol Agents will be provided training to become proficient with the Spanish language at the Academy. How to Apply: Click the Apply button on this site. You will be linked to the CBP Talent Network registration page. For Position of Interest, select Border Patrol Agent, then complete the pre-screening questions. You’ll then receive a link(s) to the BPA Job Opening Announcements (JOAs) on USAJOBS, the federal government’s official employment site, to complete your application. Be certain to review ALL details of the job opportunity announcement and follow all instructions in the application process, including items (resume, transcripts, etc.) to submit. You will be evaluated based on your resume, supporting documents, and the BPA Entrance Exam. If you have questions about the application process, contact a recruiter through the U.S. Border Patrol page: careers.cbp.gov/s/usbp. As a subscriber to the CBP Talent Network, you’ll receive monthly emails with information about webinars, career expos, and future opportunities with CBP.

Border Patrol Agent (BPA) Entry Level NEW RECRUITMENT AND RETENTION INCENTIVES! IMPORTANT NOTICE Duty assignments available at the time of offer may include the Southwest Border, including prioritized locations. U.S. Border Patrol determines duty assignments at the time of offer based on operational needs, which may or may not align with candidates' first-choice preferences. Relocation may be required. DON'T FORGET TO CHECK OUT THE INCENTIVES – SEE SALARY SECTION BELOW The U.S. Border Patrol (USBP) offers those interested in a career in law enforcement an opportunity to work with an elite team of highly trained professionals whose camaraderie, pride, and purpose are hallmarks of their daily mission of protecting America. If you seek an exciting and rewarding job that provides excellent pay, exceptional federal benefits, and job stability, now is the time to make your move. U.S. Border Patrol (USBP), within the U.S. Customs and Border Protection (CBP), is hiring immediately for these full-time, entry-level, career Law Enforcement Officer (LEO) opportunities. Salary and Benefits Annual Base Salary for newly appointed BPAs varies per grade, as follows: GL-5/GL-7 $49,739 - $89,518 per year Duty location impacts pay rates; locality pay for federal law enforcement is higher in some locations than others. A fully trained BPA may be eligible for up to an additional 25% of base pay per the BPA Pay Reform Act of 2014. This is a career ladder position with a grade level progression of GL-5, GL-7, GL-9, GS-11, and GS-12. You will be eligible for a promotion to the next higher grade level (without reapplying) once you successfully complete 52 weeks in each grade level. Border Patrol Agents are eligible to select from an array of federal employment benefits that include health, dental and other insurance plans, a generous annual and sick leave program, and participation in the Thrift Savings Plan, a retirement plan akin to a traditional ROTH 401(k) offering. Recruitment Incentive Newly appointed Border Patrol Agents (as defined in 5 CFR 575.102 ) will be offered up to a $20,000 incentive. The first $10,000 will be paid upon successful completion of the Border Patrol Academy, with the remaining $10,000 awarded for accepting a prioritized location. Prioritized locations include Sierra Blanca, TX; Presidio, TX; Sanderson, TX; Comstock, TX; Lordsburg, NM; Freer, TX; Hebbronville, TX; Ajo, AZ. Retention Incentive Newly appointed Border Patrol Agents may also qualify for up to $40,000 in additional incentives distributed over their first four years. Duties and Responsibilities As a BPA, you will be part of our 60,000+ workforce that strives to protect the American people by safeguarding our borders, deterring illicit activity, and enhancing the nation's economic prosperity. Being a BPA makes you a valuable member of the Federal Law Enforcement Officer (LEO) profession. Typical assignments include: • Detecting and questioning people suspected of violating immigration and custom laws and inspecting documents and possessions to determine citizenship or violations, • Preventing and apprehending undocumented noncitizens and smugglers of noncitizens at or near the borders by maintaining surveillance from covert positions to include using infrared scopes during night operations, • Interpreting and following tracks, marks, and other physical evidence of illegal entry of persons or contraband, • Performing farm checks, building checks, traffic checks, city patrols, and transportation checks You qualify for the GL-5 grade level if you possess one of the following: Experience One (1) year of general work experience that demonstrates the ability to take charge, make sound decisions, and maintain composure in stressful situations; to learn regulations, methods, and techniques through classroom training and/or on-the-job instruction; and the ability to gather concise information through questioning, observation, and examination of documents and records; OR Education Substitution A bachelor's degree or successful completion of a full four-year course of study in any field leading to a bachelor's degree from an accredited college or university; OR Combination of Experience and Education A combination of general work experience AND successfully completed college education. This will be calculated using your resume and official or unofficial transcripts submitted with your application. You qualify for the GL-7 grade level if you possess one of the following: Experience One year of specialized work experience that shows you have the skills necessary to: • Make sound judgments and decisions in the use of firearms., • Deal effectively with people in a courteous and tactful manner in connection with law enforcement matters. Education Substitution for the GL-7 grade level A bachelor's degree with superior academic achievement, which is based on (1) class standing, (2) grade-point average (i.e., GPA of 3.0 or higher out of a possible 4.0), or (3) honor society membership. Or will receive a bachelor's degree with Superior Academic Achievement. Or one full year of graduate-level education in a field of study related to law enforcement (e.g., criminal justice, homeland security, justice studies, law enforcement, courts and judicial systems, forensic technology, forensic psychology, or corrections and rehabilitation) from an accredited college or university; OR A Combination of Experience and Education This will be calculated using your resume and official or unofficial transcripts submitted with your application. Note If you have previous or current law enforcement or military law enforcement experience, you may qualify at the GL-9 and or GS-11 grade level. Please refer to the BPA GL-9 - 11 announcement. Other Requirements Citizenship You must be a U.S. Citizen to apply for this position. Residency You must have had primary U.S. residency (includes protectorates as declared under international law) for at least three of the last five years. Age Restrictio n: In accordance with Public Law 100-238, this position is covered under law enforcement retirement provisions. Candidates must be referred for selection to the Border Patrol Agent position before reaching their 40th birthday in accordance with Department of Homeland Security Directive 251-03. The age restriction may not apply if you are currently serving or have previously served in a federal civilian law enforcement (non-military) position covered by Title 5 U.S.C. 8336(c) or Title 5 U.S.C. 8412(d). Veterans' Preference You may also be eligible for an excepted service Veterans Recruitment Appointment (VRA). The age restriction does not apply if you are Veterans' Preference eligible. Formal Training After you are hired, you will be detailed to the U.S. Border Patrol Academy in Artesia, New Mexico, for approximately six (6) months of intensive instruction in immigration and nationality laws, law enforcement and USBP-specific operations, driver training, physical techniques, firearms, and other courses. Border Patrol work requires the ability to speak and read Spanish, as well as English. Border Patrol Agents will be provided training to become proficient with the Spanish language at the Academy. How to Apply: Click the Apply button on this site. You will be linked to the CBP Talent Network registration page. For Position of Interest, select Border Patrol Agent, then complete the pre-screening questions. You'll then receive a link(s) to the BPA Job Opening Announcements (JOAs) on USAJOBS, the federal government's official employment site, to complete your application. Be certain to review ALL details of the job opportunity announcement and follow all instructions in the application process, including items (resume, transcripts, etc.) to submit. You will be evaluated based on your resume, supporting documents, and the BPA Entrance Exam. If you have questions about the application process, contact a recruiter through the U.S. Border Patrol page: careers.cbp.gov/s/usbp. As a subscriber to the CBP Talent Network, you'll receive monthly emails with information about webinars, career expos, and future opportunities with CBP.

Border Patrol Agent (BPA) Entry Level NEW RECRUITMENT AND RETENTION INCENTIVES! IMPORTANT NOTICE Duty assignments available at the time of offer may include the Southwest Border, including prioritized locations. U.S. Border Patrol determines duty assignments at the time of offer based on operational needs, which may or may not align with candidates' first-choice preferences. Relocation may be required. DON'T FORGET TO CHECK OUT THE INCENTIVES – SEE SALARY SECTION BELOW The U.S. Border Patrol (USBP) offers those interested in a career in law enforcement an opportunity to work with an elite team of highly trained professionals whose camaraderie, pride, and purpose are hallmarks of their daily mission of protecting America. If you seek an exciting and rewarding job that provides excellent pay, exceptional federal benefits, and job stability, now is the time to make your move. U.S. Border Patrol (USBP), within the U.S. Customs and Border Protection (CBP), is hiring immediately for these full-time, entry-level, career Law Enforcement Officer (LEO) opportunities. Salary and Benefits Annual Base Salary for newly appointed BPAs varies per grade, as follows: GL-5/GL-7 $49,739 - $89,518 per year Duty location impacts pay rates; locality pay for federal law enforcement is higher in some locations than others. A fully trained BPA may be eligible for up to an additional 25% of base pay per the BPA Pay Reform Act of 2014. This is a career ladder position with a grade level progression of GL-5, GL-7, GL-9, GS-11, and GS-12. You will be eligible for a promotion to the next higher grade level (without reapplying) once you successfully complete 52 weeks in each grade level. Border Patrol Agents are eligible to select from an array of federal employment benefits that include health, dental and other insurance plans, a generous annual and sick leave program, and participation in the Thrift Savings Plan, a retirement plan akin to a traditional ROTH 401(k) offering. Recruitment Incentive Newly appointed Border Patrol Agents (as defined in 5 CFR 575.102 ) will be offered up to a $20,000 incentive. The first $10,000 will be paid upon successful completion of the Border Patrol Academy, with the remaining $10,000 awarded for accepting a prioritized location. Prioritized locations include Sierra Blanca, TX; Presidio, TX; Sanderson, TX; Comstock, TX; Lordsburg, NM; Freer, TX; Hebbronville, TX; Ajo, AZ. Retention Incentive Newly appointed Border Patrol Agents may also qualify for up to $40,000 in additional incentives distributed over their first four years. Duties and Responsibilities As a BPA, you will be part of our 60,000+ workforce that strives to protect the American people by safeguarding our borders, deterring illicit activity, and enhancing the nation's economic prosperity. Being a BPA makes you a valuable member of the Federal Law Enforcement Officer (LEO) profession. Typical assignments include: • Detecting and questioning people suspected of violating immigration and custom laws and inspecting documents and possessions to determine citizenship or violations, • Preventing and apprehending undocumented noncitizens and smugglers of noncitizens at or near the borders by maintaining surveillance from covert positions to include using infrared scopes during night operations, • Interpreting and following tracks, marks, and other physical evidence of illegal entry of persons or contraband, • Performing farm checks, building checks, traffic checks, city patrols, and transportation checks You qualify for the GL-5 grade level if you possess one of the following: Experience One (1) year of general work experience that demonstrates the ability to take charge, make sound decisions, and maintain composure in stressful situations; to learn regulations, methods, and techniques through classroom training and/or on-the-job instruction; and the ability to gather concise information through questioning, observation, and examination of documents and records; OR Education Substitution A bachelor's degree or successful completion of a full four-year course of study in any field leading to a bachelor's degree from an accredited college or university; OR Combination of Experience and Education A combination of general work experience AND successfully completed college education. This will be calculated using your resume and official or unofficial transcripts submitted with your application. You qualify for the GL-7 grade level if you possess one of the following: Experience One year of specialized work experience that shows you have the skills necessary to: • Make sound judgments and decisions in the use of firearms., • Deal effectively with people in a courteous and tactful manner in connection with law enforcement matters. Education Substitution for the GL-7 grade level A bachelor's degree with superior academic achievement, which is based on (1) class standing, (2) grade-point average (i.e., GPA of 3.0 or higher out of a possible 4.0), or (3) honor society membership. Or will receive a bachelor's degree with Superior Academic Achievement. Or one full year of graduate-level education in a field of study related to law enforcement (e.g., criminal justice, homeland security, justice studies, law enforcement, courts and judicial systems, forensic technology, forensic psychology, or corrections and rehabilitation) from an accredited college or university; OR A Combination of Experience and Education This will be calculated using your resume and official or unofficial transcripts submitted with your application. Note If you have previous or current law enforcement or military law enforcement experience, you may qualify at the GL-9 and or GS-11 grade level. Please refer to the BPA GL-9 - 11 announcement. Other Requirements Citizenship You must be a U.S. Citizen to apply for this position. Residency You must have had primary U.S. residency (includes protectorates as declared under international law) for at least three of the last five years. Age Restrictio n: In accordance with Public Law 100-238, this position is covered under law enforcement retirement provisions. Candidates must be referred for selection to the Border Patrol Agent position before reaching their 40th birthday in accordance with Department of Homeland Security Directive 251-03. The age restriction may not apply if you are currently serving or have previously served in a federal civilian law enforcement (non-military) position covered by Title 5 U.S.C. 8336(c) or Title 5 U.S.C. 8412(d). Veterans' Preference You may also be eligible for an excepted service Veterans Recruitment Appointment (VRA). The age restriction does not apply if you are Veterans' Preference eligible. Formal Training After you are hired, you will be detailed to the U.S. Border Patrol Academy in Artesia, New Mexico, for approximately six (6) months of intensive instruction in immigration and nationality laws, law enforcement and USBP-specific operations, driver training, physical techniques, firearms, and other courses. Border Patrol work requires the ability to speak and read Spanish, as well as English. Border Patrol Agents will be provided training to become proficient with the Spanish language at the Academy. How to Apply: Click the Apply button on this site. You will be linked to the CBP Talent Network registration page. For Position of Interest, select Border Patrol Agent, then complete the pre-screening questions. You'll then receive a link(s) to the BPA Job Opening Announcements (JOAs) on USAJOBS, the federal government's official employment site, to complete your application. Be certain to review ALL details of the job opportunity announcement and follow all instructions in the application process, including items (resume, transcripts, etc.) to submit. You will be evaluated based on your resume, supporting documents, and the BPA Entrance Exam. If you have questions about the application process, contact a recruiter through the U.S. Border Patrol page: careers.cbp.gov/s/usbp. As a subscriber to the CBP Talent Network, you'll receive monthly emails with information about webinars, career expos, and future opportunities with CBP.

Border Patrol Agent (BPA) Entry Level NEW RECRUITMENT AND RETENTION INCENTIVES! IMPORTANT NOTICE Duty assignments available at the time of offer may include the Southwest Border, including prioritized locations. U.S. Border Patrol determines duty assignments at the time of offer based on operational needs, which may or may not align with candidates' first-choice preferences. Relocation may be required. DON'T FORGET TO CHECK OUT THE INCENTIVES – SEE SALARY SECTION BELOW The U.S. Border Patrol (USBP) offers those interested in a career in law enforcement an opportunity to work with an elite team of highly trained professionals whose camaraderie, pride, and purpose are hallmarks of their daily mission of protecting America. If you seek an exciting and rewarding job that provides excellent pay, exceptional federal benefits, and job stability, now is the time to make your move. U.S. Border Patrol (USBP), within the U.S. Customs and Border Protection (CBP), is hiring immediately for these full-time, entry-level, career Law Enforcement Officer (LEO) opportunities. Salary and Benefits Annual Base Salary for newly appointed BPAs varies per grade, as follows: GL-5/GL-7 $49,739 - $89,518 per year Duty location impacts pay rates; locality pay for federal law enforcement is higher in some locations than others. A fully trained BPA may be eligible for up to an additional 25% of base pay per the BPA Pay Reform Act of 2014. This is a career ladder position with a grade level progression of GL-5, GL-7, GL-9, GS-11, and GS-12. You will be eligible for a promotion to the next higher grade level (without reapplying) once you successfully complete 52 weeks in each grade level. Border Patrol Agents are eligible to select from an array of federal employment benefits that include health, dental and other insurance plans, a generous annual and sick leave program, and participation in the Thrift Savings Plan, a retirement plan akin to a traditional ROTH 401(k) offering. Recruitment Incentive Newly appointed Border Patrol Agents (as defined in 5 CFR 575.102 ) will be offered up to a $20,000 incentive. The first $10,000 will be paid upon successful completion of the Border Patrol Academy, with the remaining $10,000 awarded for accepting a prioritized location. Prioritized locations include Sierra Blanca, TX; Presidio, TX; Sanderson, TX; Comstock, TX; Lordsburg, NM; Freer, TX; Hebbronville, TX; Ajo, AZ. Retention Incentive Newly appointed Border Patrol Agents may also qualify for up to $40,000 in additional incentives distributed over their first four years. Duties and Responsibilities As a BPA, you will be part of our 60,000+ workforce that strives to protect the American people by safeguarding our borders, deterring illicit activity, and enhancing the nation's economic prosperity. Being a BPA makes you a valuable member of the Federal Law Enforcement Officer (LEO) profession. Typical assignments include: • Detecting and questioning people suspected of violating immigration and custom laws and inspecting documents and possessions to determine citizenship or violations, • Preventing and apprehending undocumented noncitizens and smugglers of noncitizens at or near the borders by maintaining surveillance from covert positions to include using infrared scopes during night operations, • Interpreting and following tracks, marks, and other physical evidence of illegal entry of persons or contraband, • Performing farm checks, building checks, traffic checks, city patrols, and transportation checks You qualify for the GL-5 grade level if you possess one of the following: Experience One (1) year of general work experience that demonstrates the ability to take charge, make sound decisions, and maintain composure in stressful situations; to learn regulations, methods, and techniques through classroom training and/or on-the-job instruction; and the ability to gather concise information through questioning, observation, and examination of documents and records; OR Education Substitution A bachelor's degree or successful completion of a full four-year course of study in any field leading to a bachelor's degree from an accredited college or university; OR Combination of Experience and Education A combination of general work experience AND successfully completed college education. This will be calculated using your resume and official or unofficial transcripts submitted with your application. You qualify for the GL-7 grade level if you possess one of the following: Experience One year of specialized work experience that shows you have the skills necessary to: • Make sound judgments and decisions in the use of firearms., • Deal effectively with people in a courteous and tactful manner in connection with law enforcement matters. Education Substitution for the GL-7 grade level A bachelor's degree with superior academic achievement, which is based on (1) class standing, (2) grade-point average (i.e., GPA of 3.0 or higher out of a possible 4.0), or (3) honor society membership. Or will receive a bachelor's degree with Superior Academic Achievement. Or one full year of graduate-level education in a field of study related to law enforcement (e.g., criminal justice, homeland security, justice studies, law enforcement, courts and judicial systems, forensic technology, forensic psychology, or corrections and rehabilitation) from an accredited college or university; OR A Combination of Experience and Education This will be calculated using your resume and official or unofficial transcripts submitted with your application. Note If you have previous or current law enforcement or military law enforcement experience, you may qualify at the GL-9 and or GS-11 grade level. Please refer to the BPA GL-9 - 11 announcement. Other Requirements Citizenship You must be a U.S. Citizen to apply for this position. Residency You must have had primary U.S. residency (includes protectorates as declared under international law) for at least three of the last five years. Age Restrictio n: In accordance with Public Law 100-238, this position is covered under law enforcement retirement provisions. Candidates must be referred for selection to the Border Patrol Agent position before reaching their 40th birthday in accordance with Department of Homeland Security Directive 251-03. The age restriction may not apply if you are currently serving or have previously served in a federal civilian law enforcement (non-military) position covered by Title 5 U.S.C. 8336(c) or Title 5 U.S.C. 8412(d). Veterans' Preference You may also be eligible for an excepted service Veterans Recruitment Appointment (VRA). The age restriction does not apply if you are Veterans' Preference eligible. Formal Training After you are hired, you will be detailed to the U.S. Border Patrol Academy in Artesia, New Mexico, for approximately six (6) months of intensive instruction in immigration and nationality laws, law enforcement and USBP-specific operations, driver training, physical techniques, firearms, and other courses. Border Patrol work requires the ability to speak and read Spanish, as well as English. Border Patrol Agents will be provided training to become proficient with the Spanish language at the Academy. How to Apply: Click the Apply button on this site. You will be linked to the CBP Talent Network registration page. For Position of Interest, select Border Patrol Agent, then complete the pre-screening questions. You'll then receive a link(s) to the BPA Job Opening Announcements (JOAs) on USAJOBS, the federal government's official employment site, to complete your application. Be certain to review ALL details of the job opportunity announcement and follow all instructions in the application process, including items (resume, transcripts, etc.) to submit. You will be evaluated based on your resume, supporting documents, and the BPA Entrance Exam. If you have questions about the application process, contact a recruiter through the U.S. Border Patrol page: careers.cbp.gov/s/usbp. As a subscriber to the CBP Talent Network, you'll receive monthly emails with information about webinars, career expos, and future opportunities with CBP.

Job Description Own the bench. Build the systems. Every connection matters when the mission does. Electrical Technician Great Neck, NY | Onsite | U.S. Citizen Wild West Systems is a defense technology startup redefining autonomous edge defense through modular, AI‑powered weapon systems - designed, built, and launched in the USA. We're looking for a hands‑on Electrical Technician to help build the electrical backbone of our drone and munitions platforms. This is an execution role - you'll solder, crimp, wire, and test hardware that actually ships. Precision matters. Speed matters more. This is not an engineering role; it's a skilled technician position where craftsmanship, consistency, and accountability run the show. What You'll Do • Assemble, solder, and inspect PCBs, including SMT components., • Build and verify wiring harnesses and connector assemblies., • Crimp terminals, insert pins, and route wires to engineering specs., • Perform continuity testing and document inspection results., • Support engineers in rapid prototyping and iteration cycles., • Maintain clean, organized workstations and follow build procedures., • Troubleshoot electrical assemblies and assist in root‑cause analysis.What You Bring, • Proven hands‑on experience as an electrical or electromechanical technician., • Strong soldering skills, including surface‑mount (SMD/SMT) work., • Proficiency in custom harness assembly, crimping, and inspection testing., • Ability to read and work from schematics and wiring diagrams., • IPC certification (IPC‑A‑610, IPC/WHMA‑A‑620, or equivalent)., • Consistent execution and pride in high‑quality builds.Bonus Points, • Background in defense, drone, UAV, or aerospace manufacturing., • Prototype or low‑volume production experience., • Familiarity with low‑voltage harness work., • Competitive salary and high‑impact, mission‑driven work., • Health Insurance: 100% coverage for employees, 90% for spouse/family., • Vision & Dental: 100% coverage., • 401(k) plan with company participation.General Qualifications (All Roles), • Deep love for America and commitment to Wild West Systems' mission., • Self‑starter with a bias for action and extreme ownership., • Servant‑leader mindset; adaptable to fast, shifting priorities., • ITAR Requirement: U.S. citizenship or ITAR‑compliant status.

Job Description Manufacturing Engineer - Garden City, New York About our Client: Our Client is a global provider within a wide range of areas, including but not limited to aerospace and defense platforms, automation and manufacturing, and the medical and healthcare fields, all aiming toward advancing cutting-edge research and development. Higher Talent Group values its reputation for finding high-quality people, which is why we will conduct a screening to determine if this is a good fit for you. We will share further details such as the culture, how progression works within the company, etc. SUMMARY OF POSITION The Manufacturing Engineer will plan and design product applications and machinery. The position is responsible for organizing highly complex activities for design, development, implementation, and maintenance of heat exchanger manufacturing processes. EDUCATION AND/OR EXPERIENCE • Bachelor’s degree in Industrial Engineering, • 3-5 years of progressive experience in manufacturing engineering., • Experience in metal fabrication, welding and/or brazing of pressure containing products., • Experience in a highly regulated industry, such as, Military, Aerospace, Nuclear or Automotive or other similar., • Due to ITAR Restrictions, an export license may be required. ESSENTIAL DUTIES AND RESPONSIBILITIES The essential duties and responsibilities of this position are listed below. This list is not all-inclusive and may be amended from time to time. • Apply continuous improvement methods such as lean manufacturing to enhance manufacturing quality, reliability, or cost-effectiveness, including determining root causes of failures using statistical methods and recommend changes in designs, tolerances, or processing methods., • Design, install, and troubleshoot manufacturing equipment., • Identify opportunities and implement changes to improve products or reduce costs using knowledge of fabrication processes, tooling and production equipment, assembly methods, quality control standards, or product design, materials and parts., • Design testing methods and test finished products or process capabilities to establish standards or validate process requirements., • Design layout of equipment or workspaces to achieve maximum efficiency., • Review product designs for manufacturability or completeness; including purchasing equipment, materials, or parts and preparing documentation for new manufacturing processes or engineering procedures., • Evaluate manufactured products according to specifications and quality standards, including troubleshooting new or existing product problems involving designs, materials, or processes, • Develop sustainable manufacturing technologies and analyze the financial impacts of sustainable manufacturing, • Provide technical expertise or support related to manufacturing., • Develop, document and implement standard work instructions for critical manufacturing operations. QUALIFICATIONS, KNOWLEDGE, SKILLS, AND EXPERIENCE REQUIRED • Excellent people and communication skills are required (both oral and written)., • Strong interpersonal skills requiring the ability to resolve conflicting interests and obtain cooperation, • Computer literacy in a MRP system (Oracle a plus), Microsoft Office., • Able to work under pressure, • Highly technical and analytical skills such (drawings, schematics, layout), • Able to think out of box., • Project management skills, • Highly organized and efficient, • Possess leadership and interpersonal skills, • Strong problem-solving skills OTHER • Due to contracts with the United States Government, the candidate must be either a U.S. citizen or a Green card holder. COMPENSATION The anticipated salary range for this position is $85,000 to $105,000 annually. This range reflects the base salary for candidates who meet the requirements of the role, including experience, education, and location. Salary Disclaimer: Where a specific pay range is noted, it is a good-faith estimate only. At the time of this posting, the actual salary offered will be based on experience, skills, qualifications, market/business considerations, and geographic location. BENEFITS • Medical Plan, • Telehealth, • Prescription Drug Program, • Employee Assistance Program (EAP), • Dental Plan, • Vision Plan, • Retirement Plan with company match, • Paid Time Off, • Health Savings Account and/or Flexible Spending Accounts, • Life and AD&D Insurance, • Disability Insurance (Short and Long Term offerings) NOTE The above is presented as a matter of occupational information and guidance only; all other reasonable tasks, duties, and responsibilities that management may deem necessary for satisfactory performance may be included. ABOUT HIGHER TALENT GROUP Higher Talent Group offers candidates full-time opportunities at companies hiring nationwide. We also provide resume and career coaching services for individuals who require assistance in getting back into the workforce or for candidates who want to start looking for a new opportunity discreetly. Want to learn more? Check out our website for additional information.

Job DescriptionBenefits: • Competitive salary, • Paid time off Ready to Build Something Awesome? This isnt just another desk job its a front-row seat to helping grow the Floor Coverings International brand from the ground up in our hometown market. Were a family-owned, fast-growing flooring and home improvement company looking for a savvy, high-energy Office and Marketing Manager to join us on the journey. Youll wear multiple hats from local marketing and event planning to running our daily operations and your ideas will shape how we grow. If youre an organized go-getter whos equal parts creative and customer-focused, this could be your dream job. What Were Looking For • 2+ years in office admin, customer service (flooring or home services is a big plus)., • Must have a valid drivers license and reliable transportation., • Must be a U.S. citizen., • Comfortable being independent you take initiative, stay on top of tasks, and keep things moving., • A natural storyteller with a love for social media. Bonus: you dabble in content creation or editing., • Tech-literate and willing to learn especially with platforms like Salesforce, Quickbooks, Excel, Social Media, phone and payments systems., • Organized, resourceful, and able to manage multiple balls in the air (without dropping any)., • A people-person because creating great customer experiences is just who you are.What Youll Do A Little Bit of Everything, and Thats the Fun Part Operations & Office Management • Stay on top of the phone system so every call hears your voice., • Turn website and phone leads into scheduled appointments., • Order flooring & materials, manage logistics, and enter invoices into QuickBooks., • Keep us organized in Salesforce and QuickBooks from lead to close., • Ensure every customer experience ends on a high note follow-ups, thank-you notes, and yes review requests.Marketing & Community Engagement, • Post fresh, engaging content on social (FB, Insta, LinkedIn, etc) that tells our story and highlights our work., • Coordinate with digital marketing partners to ensure were hitting the mark online and maximizing our return on ad spend SEO, ads, web presence.Why Youll Love Working With Us, • This is your chance to grow with a growing company and help shape what it becomes., • Were family-owned and people-first we care about craftsmanship, community, and culture., • Your voice will be heard we welcome ideas, not just task-doers., • No two days are the same and we mean that in the best way. With more than 25 years each in the corporate world, Awie and Guy gained invaluable experience in leadership, operations, and customer care. Yet, they always shared a dream of owning something of their own a business built around their values, their vision, and their family. When they discovered the Floor Coverings International model where customers are treated with genuine kindness and respect while receiving a beautiful flooring transformation they knew they had found the right fit. The combination of strong systems, exceptional products, and a customer-first philosophy immediately resonated with them. Now, as they continue to grow, Awie and Guy are excited to bring on their first employee someone who shares their passion for outstanding service and community impact. They are building more than a flooring business; they are creating a legacy for their family and a company their community can trust for years to come. If youre a proactive and organized professional with a passion for delivering exceptional service and contributing to a growing business, we want to hear from you! Apply today to become a key member of our Floor Coverings International family in the greater Manhasset area.

Job Description Senior Structural Engineer - Garden City, New York About our Client: Our Client is a global provider within a wide range of areas, including but not limited to aerospace and defense platforms, automation and manufacturing, and the medical and healthcare fields, all aiming toward advancing cutting-edge research and development. Higher Talent Group values its reputation for finding high-quality people, which is why we will conduct a screening to determine if this is a good fit for you. We will share further details such as the culture, how progression works within the company, etc. EDUCATION AND/OR EXPERIENCE • Bachelor’s degree or higher in Mechanical or Aerospace Engineering or a related field, • Master’s degree preferred, • 5+ years of experience in a similar role SUMMARY OF POSITION The Senior Structural Engineer is responsible for leading intricate analyses to ensure our products will meet customer requirements. This role requires rigorous application of structural mechanics while adhering to manufacturing, testing, and quality best practices. The Senior Structural Engineer will engage in problem-solving daily and regularly present results to internal and external stakeholders. ESSENTIAL DUTIES AND RESPONSIBILITIES The essential duties and responsibilities of this position are listed below. This list is not all-inclusive and may be amended from time to time. • Perform critical thermomechanical analyses of complex aerospace hardware through commercial analysis packages and hand calculations, working closely with the design team to rapidly iterate on new product development, • Peer review analyses produced by other structures engineers and subcontractors, • Liaise with customer on heat exchanger requirements, • Generate technical reviews, reports, and other engineering documentation, • Champion process improvement activities related to structural analysis, • Review and approve design changes and test procedures, • Support disposition of technical issues which occur during manufacturing, • Support customer reviews and inbound requests, • Support proposals and future product development QUALIFICATIONS, KNOWLEDGE, SKILLS, AND EXPERIENCE REQUIRED • Extensive experience performing structural analysis for mechanical components (aerospace preferred), • Expertise in commercial FEA software packages, • Expertise in material properties and selection process, • Knowledge of design principles, manufacturing processes, and assembly techniques, • Knowledge of 3D modeling and CAD software, • Knowledge of heat and mass transfer, fluid mechanics, and thermodynamics, • Knowledge of drawing ANSI standards and GD&T procedures, • Highly motivated self-starter, • Strong problem-solving skills, • Excellent attention to detail, • Strong verbal and written communication skills, • Capable of thriving in a fast-paced environment PHYSICAL DEMANDS • Ability to work for prolonged periods on a computer or in a lab environment, • Ability to move equipment up to 25 pounds OTHER • Due to contracts with the United States Government, the candidate must be either a U.S. citizen or a Green card holder. COMPENSATION The anticipated salary range for this position is $105,000 to $150,000 annually. This range reflects the base salary for candidates who meet the requirements of the role, including experience, education, and location. Salary Disclaimer: Where a specific pay range is noted, it is a good-faith estimate only. At the time of this posting, the actual salary offered will be based on experience, skills, qualifications, market/business considerations, and geographic location. BENEFITS • Medical Plan, • Telehealth, • Prescription Drug Program, • Employee Assistance Program (EAP), • Dental Plan, • Vision Plan, • Retirement Plan with company match, • Paid Time Off, • Health Savings Account and/or Flexible Spending Accounts, • Life and AD&D Insurance, • Disability Insurance (Short and Long Term offerings) NOTE The above is presented as a matter of occupational information and guidance only; all other reasonable tasks, duties, and responsibilities that management may deem necessary for satisfactory performance may be included. ABOUT HIGHER TALENT GROUP Higher Talent Group offers candidates full-time opportunities at companies hiring nationwide. We also provide resume and career coaching services for individuals who require assistance in getting back into the workforce or for candidates who want to start looking for a new opportunity discreetly. Want to learn more? Check out our website for additional information.

Job Description Test Engineer/Hardware Requirements - Garden City, New York About our Client: Our Client is a global provider within a wide range of areas, including but not limited to aerospace and defense platforms, automation and manufacturing, and the medical and healthcare fields, all aiming toward advancing cutting-edge research and development. Higher Talent Group values its reputation for finding high-quality people, which is why we will conduct a screening to determine if this is a good fit for you. We will share further details such as the culture, how progression works within the company, etc. EDUCATION AND/OR EXPERIENCE • Bachelor’s degree or higher in Mechanical or Aerospace Engineering or a related field, • 2+ years of experience in a similar or related role SUMMARY OF POSITION The Test Engineer is responsible for developing and executing tests to ensure that product quality and reliability meet customer requirements. This role involves collaborating with cross-functional teams to identify testing needs, create test procedures, and analyze results. The Test Engineer will also engage in troubleshooting and problem-solving to ensure product performance. ESSENTIAL DUTIES AND RESPONSIBILITIES The essential duties and responsibilities of this position are listed below. This list is not all-inclusive and may be amended from time to time. • Prepare and review acceptance and qualification test procedures and corresponding reports for complex aerospace hardware, • Oversee and execute hardware testing, • Analyze test results and ensure compliance with customer requirements, • Install and troubleshoot testing equipment, • Travel as needed to test labs to support testing, • Improve data acquisition system software and hardware, • Assist in the maintenance of test lab equipment, • Maintain database of instrumentation used in the test department, • Research new instrumentation and testing methodologies, • Review calibration of test instruments to verify compliance with quality assurance and customer requirements, • Support disposition of technical issues which occur during manufacturing, • Support customer reviews and inbound requests QUALIFICATIONS, KNOWLEDGE, SKILLS, AND EXPERIENCE REQUIRED • Strong understanding of testing methodologies and best practices, • Expertise in instrumentation and data acquisition, • Knowledge of analog and digital test equipment, • Knowledge of data acquisition software such as LabVIEW, • Knowledge of data processing techniques, Excel preferred, • Knowledge of relevant MIL-STD’s, • Familiarity with 3D modeling and CAD software, • Familiarity with heat and mass transfer, fluid mechanics, thermodynamics, and structural mechanics, • Highly motivated self-starter, • Strong problem-solving skills, • Excellent attention to detail, • Strong verbal and written communication skills, • Capable of thriving in a fast-paced environment PHYSICAL DEMANDS • Ability to work for prolonged periods on a computer or in a lab environment, • Ability to move equipment up to 25 pounds OTHER • Due to contracts with the United States Government, the candidate must be either a U.S. citizen or a Green card holder. COMPENSATION The anticipated salary range for this position is $80,000 to $120,000 annually. This range reflects the base salary for candidates who meet the requirements of the role, including experience, education, and location. Salary Disclaimer: Where a specific pay range is noted, it is a good-faith estimate only. At the time of this posting, the actual salary offered will be based on experience, skills, qualifications, market/business considerations, and geographic location. NOTE The above is presented as a matter of occupational information and guidance only; all other reasonable tasks, duties, and responsibilities that management may deem necessary for satisfactory performance may be included. ABOUT HIGHER TALENT GROUP Higher Talent Group offers candidates full-time opportunities at companies hiring nationwide. We also provide resume and career coaching services for individuals who require assistance in getting back into the workforce or for candidates who want to start looking for a new opportunity discreetly. Want to learn more? Check out our website for additional information.

Job Description Director, Human Resources - Garden City, New York About our Client: Our Client is a global provider within a wide range of areas, including but not limited to aerospace and defense platforms, automation and manufacturing, and the medical and healthcare fields, all aiming toward advancing cutting-edge research and development. Higher Talent Group values its reputation for finding high-quality people, which is why we will conduct a screening to determine if this is a good fit for you. We will share further details such as the culture, how progression works within the company, etc. EDUCATION AND/OR EXPERIENCE • Bachelor’s degree with a minimum of 6+ years HR experience in the manufacturing industry; master’s degree with 10+ years HR experience preferred, • Minimum of 4+ years of experience in Labor Relations SUMMARY OF POSITION The Director of Human Resources is an essential member of the HTF leadership team contributing to the development and execution of the business’s annual strategic plan. This position is a senior staff level role at our client’s Business Unit, and the individual will play a key role in guiding the strategic direction and leading the efficient execution of activities to profitably grow the business. This position reports directly to the HTF DVP/Business Unit Manager, with a strong dotted line to the Aerospace & Defense Division Vice President of Human Resources. ESSENTIAL DUTIES AND RESPONSIBILITIES The essential duties and responsibilities of this position are listed below. This list is not all-inclusive and may be amended from time to time. • Serve as a key member of the Senior Leadership Team (SLT) for the Business Unit and the trusted advisor and business partner of the DVP BU Manager, • Lead the HTF HR team in full cycle HR responsibilities (hiring, onboarding, development, performance management, employee relations, payroll, etc.), • Collaborate with the BU Manager and SLT to assess leadership capabilities, implement targeted development strategies, and drive initiatives that align with HTF values and accelerate business performance, • Full ownership of Labor Relations for the Hughes-Treitler Garden City location including CBA administration, grievance and arbitration management, and participation in contract negotiations, • Serve as the key coach to all leaders within the business unit managers on HR Strategy, policy and leadership principles; recommend organizational structure, improvements to policies, programs, and procedures related to the effectiveness of the HR function, • Leverage HR KPIs and metrics to make data-driven business decisions, • Travel required up to 40% to the Business Unit locations QUALIFICATIONS, KNOWLEDGE, SKILLS, AND EXPERIENCE REQUIRED • Experience driving transformative change within a manufacturing business; ability to partner with and effectively influence Senior Business Leaders, • Robust understanding of manufacturing technical talent and operation speed, • Expertise in leading talent acquisition initiatives and aligning hiring strategies with business objectives, • Knowledge of Federal, State, and Local employment regulations, • Working knowledge of a manufacturing P a practical working knowledge of manufacturing concepts (Throughput, Direct Labor Planning, etc.), • Must have the ability to multitask with strong time/priority management skills, • Due to the nature of HTF's programs and products, applicants must have the legal right to work in the US and additionally must be legally authorized to access export-controlled information and source code. OTHER • Due to contracts with the United States Government, the candidate must be either a U.S. citizen or a Green card holder. COMPENSATION The anticipated salary range for this position is $185,000 to $200,000 annually. This range reflects the base salary for candidates who meet the requirements of the role, including experience, education, and location. Salary Disclaimer: Where a specific pay range is noted, it is a good-faith estimate only. At the time of this posting, the actual salary offered will be based on experience, skills, qualifications, market/business considerations, and geographic location. NOTE The above is presented as a matter of occupational information and guidance only; all other reasonable tasks, duties, and responsibilities that management may deem necessary for satisfactory performance may be included. ABOUT HIGHER TALENT GROUP Higher Talent Group offers candidates full-time opportunities at companies hiring nationwide. We also provide resume and career coaching services for individuals who require assistance in getting back into the workforce or for candidates who want to start looking for a new opportunity discreetly. Want to learn more? Check out our website for additional information.

Job Description Lead Design Engineer - Garden City, New York About our Client: Our Client is a global provider within a wide range of areas, including but not limited to aerospace and defense platforms, automation and manufacturing, and the medical and healthcare fields, all aiming toward advancing cutting-edge research and development. Higher Talent Group values its reputation for finding high-quality people, which is why we will conduct a screening to determine if this is a good fit for you. We will share further details such as the culture, how progression works within the company, etc. EDUCATION AND/OR EXPERIENCE • Bachelor’s degree or higher in Mechanical or Aerospace Engineering or a related field, • 8+ years of progressive engineering experience SUMMARY OF POSITION The Lead Design Engineer is responsible for overseeing the design and development of complex mechanical parts and assemblies. This role focuses on leading technical decision-making, ensuring design integrity, and driving innovation across projects. The Lead Design Engineer will play a key role in cross-functional collaboration, mentoring, and continuous improvement initiatives. ESSENTIAL DUTIES AND RESPONSIBILITIES The essential duties and responsibilities of this position are listed below. This list is not all-inclusive and may be amended from time to time. • Lead the development of 3D models of complex aerospace hardware, • Prepare design concepts, sketches, layouts, technical drawings, and BOMs, • Serve as the primary technical point of contact for design-related decisions across new and existing products, • Interface with internal and external stakeholders to ensure manufacturability, • Certify technical reviews and other engineering documentation, • Lead cross-functional activities to sustain existing designs, • Manage complete implementation of engineering design change requests, • Lead resolution of technical issues during manufacturing and customer interactions, • Champion process improvement activities related to design engineering, • Support proposals and future product development QUALIFICATIONS, KNOWLEDGE, SKILLS, AND EXPERIENCE REQUIRED • Extensive experience as a Senior Mechanical Design Engineer, Technical Lead, or similar role, • Expertise in parametric CAD design, • Expertise in drawing ANSI standards and GD&T procedures, • Expertise in manufacturing techniques and processes, • Knowledge of material properties and selection process, • Knowledge of FMEAs and quality assurance processes, • Knowledge of relevant MIL-STD’s, • Familiarity with heat and mass transfer, fluid mechanics, thermodynamics, and structural mechanics, • Highly motivated self-starter, • Strong problem-solving skills, • Excellent attention to detail, • Strong verbal and written communication skills, • Capable of thriving in a fast-paced environment PHYSICAL DEMANDS • Ability to work for prolonged periods on a computer or in a lab environment, • Ability to move equipment up to 25 pounds OTHER • Due to contracts with the United States Government, the candidate must be either a U.S. citizen or a Green card holder. COMPENSATION The anticipated salary range for this position is $120,000 to $160,000 annually. This range reflects the base salary for candidates who meet the requirements of the role, including experience, education, and location. Salary Disclaimer: Where a specific pay range is noted, it is a good-faith estimate only. At the time of this posting, the actual salary offered will be based on experience, skills, qualifications, market/business considerations, and geographic location. BENEFITS • Medical Plan, • Telehealth, • Prescription Drug Program, • Employee Assistance Program (EAP), • Dental Plan, • Vision Plan, • Retirement Plan with company match, • Paid Time Off, • Health Savings Account and/or Flexible Spending Accounts, • Life and AD&D Insurance, • Disability Insurance (Short and Long Term offerings) NOTE The above is presented as a matter of occupational information and guidance only; all other reasonable tasks, duties, and responsibilities that management may deem necessary for satisfactory performance may be included. ABOUT HIGHER TALENT GROUP Higher Talent Group offers candidates full-time opportunities at companies hiring nationwide. We also provide resume and career coaching services for individuals who require assistance in getting back into the workforce or for candidates who want to start looking for a new opportunity discreetly. Want to learn more? Check out our website for additional information.

Job Description Director, Manufacturing Engineering – Garden City, New York About our Client: Our Client is a global provider within a wide range of areas, including but not limited to aerospace and defense platforms, automation and manufacturing, and the medical and healthcare fields, all aiming toward advancing cutting-edge research and development. Higher Talent Group values its reputation for finding high-quality people, which is why we will conduct a screening to determine if this is a good fit for you. We will share further details such as the culture, how progression works within the company, etc. EDUCATION AND/OR EXPERIENCE • Bachelor’s degree in engineering, Manufacturing Engineering preferred, or other technical related discipline is required; MBA or other relevant advanced degree is preferred., • Minimum 8 years experience in a manufacturing environment, including managing salaried and hourly staffs., • Minimum 5 years using continuous improvement methodologies, LEAN, Six Sigma, etc. is preferred. SUMMARY OF POSITION The Director, Manufacturing Engineering (ME Director) is responsible for supporting business goals including product cost and quality, schedule adherence and delivery on-time to customer demand. It is a hands-on position that is responsible for ensuring the manufacturing processes, tooling, equipment support the Safety, Quality, Delivery and Productivity goals of the business. This ME Director plays an integral part in plant operations, special projects, OPEX, and is responsible for developing and maintaining motivated team and for supporting budgetary and production targets. The position has direct reports but must be able to work in partnership with Engineering, Quality, Supply Chain and Production in support of the departmental objectives. SUPERVISORY RESPONSIBILITIES The position has direct reports but must be able to work in partnership with Engineering, Quality, Supply Chain and Production in support of the departmental objectives. ESSENTIAL DUTIES AND RESPONSIBILITIES The essential duties and responsibilities of this position are listed below. This list is not all-inclusive and may be amended from time to time. • The Manufacturing Engineering team is responsible for developing the standard processes used to manufacture heat exchangers including selection and definition of all tooling, equipment, fixtures, and anything else related to the process. The team is responsible to ensure all production processes are defined using the standard work formats and templates as well as to create any training documents required to ensure production operators can perform the work in accordance with the documented standard., • Design and develop any tooling or fixtures needed to support the production processes., • Support the Operations team in the achievement of KPI’s related to shipping volume targets, on-time delivery, past due backlog, customer lead time, efficiency, utilization, and overtime premium expense., • Support and drive continuous improvements in manufacturing metrics including quality, yields, cycle time, productivity, and cost. Promote process improvement, and LEAN manufacturing methodologies and 5S processes., • Implement and drive continuous improvement activities through implementation of change management process and best practices., • Timely and thorough implementation of engineering changes. Actively partner in the creation and review of engineering changes when needed., • Establish and monitor overall performance for product and quality standards; recommend process improvements / quality control programs. Recommend changes in work practices to improve production standards and product quality., • Ensure the ME team is properly deployed to support the daily needs of the business, new product introduction, cost reduction projects, or other duties as needed., • Oversee the Operational Excellence (cost reduction) plans for the site. Coordinate and manage the projects at a tactical level and develop the project tracking tools to report out to senior management., • Coordinate, review, and present data for the purchase of capital equipment, tooling improvements to audiences at various levels of the company., • Provide technical support and recommendations to both internal and external customer technical/quality teams regarding process improvements, non-conforming parts, defects, and repair/rework., • Author annual performance reviews and develop continuing education and advancement paths for entire department., • Provide oversight for manufacturing activities in the Reynosa Mexico facility., • Minimal travel expected. Potential travel to facility in Reynosa, Mexico in support of overall business objectives. UALIFICATIONS, KNOWLEDGE, SKILLS, AND EXPERIENCE REQUIRED • Must possess solid analytical skills in forecasting and anticipating production needs and capabilities., • Must be able to prioritize workload in a multitasking environment, short-term tactical along with longer term strategic activities., • Must be able to work independently with minimum supervision and have the ability to interact positively and motivate others, • Excellent verbal and written communication skills; fluency in Spanish is preferred., • Experience with MRP systems; preferably Oracle., • Proficient in Microsoft Office programs to include Teams, Word, Excel, and PowerPoint., • Willingness to work a flexible schedule to get the job done., • Exceptional communication skills; promoting teamwork and a positive work environment., • Experience should include build-to-order manufacturing management experience in medium volume/high-mix production environments, preferably in the military or aerospace industries., • Demonstrated history of successful change management and implementation of operational excellence improvements such as lean manufacturing, demand flow, and six sigma., • Strong ability to communicate with all levels of the organization from the production floor to the executive office; strong interpersonal, leadership, & organizational skills., • Familiarity with assembly, welding, brazing, machining, and testing processes is desired., • Demonstrated knowledge of and familiarity with a variety of lean tools and methodologies including, but not limited to:, • VSM, Standard Work, Pull Systems & Kanban, Integrated Business Planning, Daily Management, 5S/Visual, • Management, 3P, SMED, TPM, Variation Reduction and Six Sigma. OTHER • Due to contracts with the United States Government, the candidate must be either a U.S. citizen or a Green card holder. COMPENSATION The anticipated salary range for this position is $175,000 to $200,000 annually. This range reflects the base salary for candidates who meet the requirements of the role, including experience, education, and location. Salary Disclaimer: Where a specific pay range is noted, it is a good-faith estimate only. At the time of this posting, the actual salary offered will be based on experience, skills, qualifications, market/business considerations, and geographic location. BENEFITS • Medical Plan, • Telehealth, • Prescription Drug Program, • Employee Assistance Program (EAP), • Dental Plan, • Vision Plan, • Retirement Plan with company match, • Paid Time Off, • Health Savings Account and/or Flexible Spending Accounts, • Life and AD&D Insurance, • Disability Insurance (Short and Long Term offerings) NOTE The above is presented as a matter of occupational information and guidance only; all other reasonable tasks, duties, and responsibilities that management may deem necessary for satisfactory performance may be included. ABOUT HIGHER TALENT GROUP Higher Talent Group offers candidates full-time opportunities at companies hiring nationwide. We also provide resume and career coaching services for individuals who require assistance in getting back into the workforce or for candidates who want to start looking for a new opportunity discreetly. Want to learn more? Check out our website for additional information.

Job Description Quality Engineer II - Massapequa, NY About our Client: Our Client is a global provider within a wide range of areas, including but not limited to aerospace and defense platforms, automation and manufacturing, and the medical and healthcare fields, all aiming toward advancing cutting-edge research and development. Higher Talent Group values its reputation for finding good quality people, which is why we will provide a screening to see if this is a good fit for you. We will share further details such as the culture, how progression works within the company, etc. SUMMARY OF POSITION The Quality Engineer II position will work closely to solve quality problems and support new development programs, legacy programs, and conduct internal audits. SUPERVISORY RESPONSIBILITIES • This job has no supervisory responsibilities. ESSENTIAL DUTIES AND RESPONSIBILITIES The essential duties and responsibilities of this position are listed below. This list is not all-inclusive and may be amended from time to time. • Working closely with Engineering to ensure that designs meet applicable quality requirements., • Plan and perform internal quality audits and execute action items., • Lead quality initiatives to reduce scrap and rework by developing and facilitating cross-functional teams., • Conducting quality investigations., • Be an active participant in the material review board., • Provide quality function support by working closely with Sales, Engineering, and Manufacturing to manage customer relations, expectations, needs and satisfaction., • Independently drive and direct actions with departmental groups to maintain MRB and RMA issues., • Drive key quality performance metrics: DPPM, OTD, Cost of Quality, Customer Scorecards, Internal Audit Risk and Effectiveness, Supplier Performance, Contract Review., • Source inspection liaison, • Travel to customer and supplier locations as required. SECONDARY DUTIES AND RESPONSIBILITIES • Supporting new product introduction programs by creating and maintaining the following, as required:, • Production Part Approval Process, • Advanced Product Quality Planning, • Zero Defects Program, • Control Plans, • Inspection Plans, • Inspection Reports, • First Article Inspection Reports, • Supplier Approval and Development, • Attend NPI meetings, including, • Preliminary Design Reviews, • Critical Design Reviews, • Make Buy Reviews, • Monitor the Progress of NPI programs through manufacturing and into production, • Conduct purchase order reviews related to NPI and production programs, • Interact with customers on NPI and production programs, • Engage in problem-solving with engineering, operations, and supply chain on NPI and production programs, • Support shipments of NPI and production programs, • Conduct internal audits, • Become a designated quality representative when required by the customer QUALIFICATIONS, KNOWLEDGE, SKILLS, AND EXPERIENCE REQUIRED • Knowledge of aerospace quality requirements and specifications., • Proven track record of partnering with manufacturing and engineering, • Experience with root cause analysis and corrective action. Experience with formal quality and operations systems., • Capable of reviewing and interpreting drawings, contracts / POs, and applicable processing standards., • Skilled at performing First Article inspections., • Proficiency with MS Office applications: Word, Excel, PowerPoint, and Outlook., • An understanding of the use and application of statistics and SPC., • Six Sigma preferred EDUCATION AND/OR EXPERIENCE • Bachelor’s Degree in Engineering required, • 9 to 10 plus years working in the aerospace and or automotive industry in a quality, engineering, or manufacturing capacity., • Previous experience in a high-mix, low-volume job shop, • Ability to manage priorities and meet deadlines in a fast-paced environment, • Working knowledge of ISO 9001:2015 and AS9100D Quality Management System processes., • Due to ITAR restrictions, an export license may be required OTHER SKILLS • Computer Literacy in Excel, Minitab, CAD, and Visio, • Advanced problem-solving and advanced data analysis techniques, • Knowledge in and experience in 8D problem-solving techniques, SPC, and statistical analysis PHYSICAL DEMANDS • Continuous periods of sitting at a desk and working on a computer and phone., • Prolonged time standing., • Must be able to occasionally lift 25 pounds at a time., • Frequently required to stand, walk, and reach with arms and hands. OTHER • Due to contracts with the United States Government, the candidate must be either a U.S. citizen or a Green card holder. COMPENSATION The anticipated salary range for this position is $100,000 to $120,000 annually. This range reflects the base salary for candidates who meet the requirements of the role, including experience, education, and location. Salary Disclaimer: Where a specific pay range is noted, it is a good-faith estimate only. At the time of this posting, the actual salary offered will be based on experience, skills, qualifications, market/business considerations, and geographic location. BENEFITS • Medical Plan, • Telehealth, • Prescription Drug Program, • Employee Assistance Program (EAP), • Dental Plan, • Vision Plan, • Retirement Plan with company match, • Paid Time Off, • Health Savings Account and/or Flexible Spending Accounts, • Life and AD&D Insurance, • Disability Insurance (Short and Long Term offerings) NOTE The above is presented as a matter of occupational information and guidance only; all other reasonable tasks, duties, and responsibilities that management may deem necessary for satisfactory performance may be included. ABOUT HIGHER TALENT GROUP Higher Talent Group offers candidates full-time opportunities at companies hiring nationwide. We also provide resume and career coaching services for individuals who require assistance in getting back into the workforce or for candidates who want to start looking for a new opportunity discreetly. Want to learn more? Check out our website for additional information.

Job Description CNC Operator - 1st Shift – Garden City, New York About our Client: Our Client is a global provider within a wide range of areas, including but not limited to aerospace and defense platforms, automation and manufacturing, and the medical and healthcare fields, all aiming toward advancing cutting-edge research and development. Higher Talent Group values its reputation for finding high-quality people, which is why we will conduct a screening to determine if this is a good fit for you. We will share further details such as the culture, how progression works within the company, etc. EDUCATION AND/OR EXPERIENCE • High School degree or GED Certificate, • Minimum 5 years CNC/conventional experience. SUMMARY OF POSITION Operate and set-up CNC and conventional equipment for the manufacture of aerospace products. ESSENTIAL DUTIES AND RESPONSIBILITIES • The essential duties and responsibilities of this position are listed below. This list is not all-inclusive and may be amended from time to time., • Set-Up and operate vertical milling machines and/or horizontal milling machines., • Set Up and run conventional milling machine., • Machine detail parts and final assemblies from the engineering drawings and methodsheets using fixtures and drill jogs., • Work to close tolerance (+/- .0005), • Other duties as assigned. QUALIFICATIONS, KNOWLEDGE, SKILLS, AND EXPERIENCE REQUIRED • First piece inspection, • Ability to read blueprints., • Ability to edit programs and follow instructions, setups, and method sheets. PHYSICAL DEMANDS • Ability to lift up to 35 lbs. OTHER • Due to contracts with the United States Government, the candidate must be either a U.S. citizen or a Green card holder. COMPENSATION The anticipated salary range for this position is $50,000 to $80,000 annually. This range reflects the base salary for candidates who meet the requirements of the role, including experience, education, and location. Salary Disclaimer: Where a specific pay range is noted, it is a good-faith estimate only. At the time of this posting, the actual salary offered will be based on experience, skills, qualifications, market/business considerations, and geographic location. BENEFITS • Medical Plan, • Telehealth, • Prescription Drug Program, • Employee Assistance Program (EAP), • Dental Plan, • Vision Plan, • Retirement Plan with company match, • Paid Time Off, • Health Savings Account and/or Flexible Spending Accounts, • Life and AD&D Insurance, • Disability Insurance (Short and Long Term offerings) NOTE The above is presented as a matter of occupational information and guidance only; all other reasonable tasks, duties, and responsibilities that management may deem necessary for satisfactory performance may be included. ABOUT HIGHER TALENT GROUP Higher Talent Group offers candidates full-time opportunities at companies hiring nationwide. We also provide resume and career coaching services for individuals who require assistance in getting back into the workforce or for candidates who want to start looking for a new opportunity discreetly. Want to learn more? Check out our website for additional information.

Job Description We’re seeking an organized and highly motivated insurance account manager to join our growing team. Responsibilities include managing client communications, nurturing key relationships, and keeping track of all necessary documentation, paying close attention to any policy changes, important deadlines, and legal regulations. You will help customers understand their coverage, assist them with any claims as needed, and ensure all relevant data is properly tracked in our secure systems. This is a chance to build on your experience, with plenty of room for growth. If you’re looking to take on an important account management role during this period of high growth as we attain new business, we’ll provide the training you need to succeed in this position. Start your application today! Compensation: $100,000 - $200,000 yearly Responsibilities: • Gather all documentation needed for reporting a claim and contact an adjuster to process it against a current policy, • Record any policy updates or changes on customer accounts by tracking them in our book of business and communicating with clients to explain any updates to their coverage, • Help create competitive quotes when it is time to issue renewals or make updates to a current policy, • Meet regularly with agents to keep up with industry standards, insurance products, current rates, coverages, insurance policies, and carriers, so you can assist clients, underwriters, sales representatives, account executives, and the rest of our service team with understanding and addressing the newest rules and policy updates, • Answer clients completely on policy or billing questions including explanations about their coverage or rate adjustments to ensure total understandingQualifications:, • Follow up skill, written and verbal communication skills and problem-solving skills are a must in this role, • Candidates should have basic computer skills and be proficient with Microsoft Office Suite (Word, Excel PowerPoint, etc.), • Must have active insurance license in your state or must be willing to get licensed in 90 days, • We are looking for candidates with an Associates or Bachelor’s degree but will consider those with relevant insurance industry experience, as well, • Insurance experience as an insurance agent or other position is preferred but we will provide training as needed for the right fit and skillset, • MBA or previous management/team-building experience (Required), • Organized, detail-oriented, and excellent time management skills, • Ambitious, disciplined leaders who demonstrate the utmost professionalism, • Relationship building and networking abilities, exemplary interpersonal skills, • Coachable and the ability to work in a team-based environment, • J.D. (attorney) or M.B.A. is a Strong plus, • Sales experience is not required, but is a plus, • FINRA Series 6, 7, 63, 65, or 66, a plus (company will pay for sponsorship for the right candidate), • Life & Health Insurance License not required (company will pay for sponsorship), • Financial Industry background is a plus; however, financial or insurance sales experience is not required, • Personal Transportation will be required for this position, • Must be a U.S. Citizen or a Permanent residentAbout Company About New York Life... New York Life is a Fortune 100 company with a long history of doing good. We have been in business for over 175 years, helping generations of Americans protect their families and attain their financial goals. As a mutual company, we are accountable only to our policyholders, not to Wall Street or outside investors. We are focused on the long-term success of clients. We’re proud of our financial strength.5 • A++ Superior (A.M. Best), • AAA Exceptionally Strong (Fitch), • Aaa Exceptional (Moody’s), • Human Rights Campaign: 2022 Corporate Equality Index, • Forbes 2022: America’s Best Employers for Diversity, • Latino Leaders 2022 Best Companies for Latinos to Work For

Job Description Machine Maintenance Engineer Manager - Massapequa, NY About our Client: Our Client is a global provider within a wide range of areas, including but not limited to aerospace and defense platforms, automation and manufacturing, and the medical and healthcare fields, all aiming toward advancing cutting-edge research and development. Higher Talent Group values its reputation for finding good quality people, which is why we will provide a screening to see if this is a good fit for you. We will share further details such as the culture, how progression works within the company, etc. SUMMARY OF POSITION The Facilities & Maintenance Engineer Manager will ensure that safety comes first in all efforts while directly supporting the needs of Production. This position will oversee the repairs, installations, and upkeep of facilities, equipment, and offices. This is a hands-on position where detailed knowledge of equipment and facilities is required. Their main duties include designing maintenance procedures, tracking budgets and expenses and performing inspections to find problems and make repairs. The position requires knowledge of manufacturing machines (CNC, Vacuum Braze Ovens, etc.) for installation, preventative maintenance, repairs, and upkeep. Candidates with these skills will be considered. SUPERVISORY RESPONSIBILITIES • Supervise employees of the maintenance department. Duties and Responsibilities: • Maintain a safe work environment while meeting the needs of production., • Ability to work independently or as a part of a team., • Perform routine work throughout the production floor., • Monitor, repair, and cite problems with process and production equipment., • Coordinate with various contractors to obtain the necessary repair information, required parts, and procedures to complete various projects and tasks., • Designing maintenance procedures, tracking budgets and expenses, and performing inspections to find problems and make repairs., • Train and supervise employees of the maintenance department., • Responsible for machine and facility maintenance., • Facilitates and assists Facility property insurance company by scheduling and participating in regular facility audits and follows up to address and implement corrective actions when deemed appropriate., • Negotiate contracts with outside vendors for execution of maintenance work., • Ensure operational efficiency of electrical equipment and mechanical systems through timely inspection and repair., • Ensure that company premises and facilities are kept in clean and hygienic condition., • Perform other duties and assignments as required. QUALIFICATIONS, KNOWLEDGE, SKILLS, AND EXPERIENCE REQUIRED • Machine & and Equipment Repair, • Ability to maintain, troubleshoot, disassemble, and repair production equipment in a safe manner while minimizing downtime., • Execute machine repairs, alignments, lubrication, coolant changes, etc., • Demonstrate a willingness to learn various systems throughout the multiple trades., • Electrical, HVAC, & Plumbing:, • Basic understanding of electrical systems, including DC and AC voltage ranging from 24V to 480V., • Be able to read, interpret, and modify electrical prints and schematics., • Experience in ladder logic, PLC’s, VFD’s, instrumentation and control devices., • Familiarity with the operation of gas and oil heating systems., • Familiarity with the general operation of air handlers, condensers, and evaporators EDUCATION AND/OR EXPERIENCE • Bachelor’s degree required., • Minimum of five to ten years of experience and/or training., • Background in general maintenance of manufacturing machines, • General knowledge of process equipment (i.e. automated systems, chillers, air compressors, hydraulics, pneumatics, etc.), • Demonstrate proficiency in the safe use of an array of hand and power tools., • Experience with MS Office is preferred. SAFETY • Support a safety culture on the production floor., • Observance of guidelines of the safe use, handling, and disposal of various chemicals used., • Knowledge of safety topics (i.e. Lockout Tagout, Arc Flash, Machine Guarding, Hazcom, DOT, RCRA, Material Handling, etc.) LEADERSHIP • The individual must be a problem solver., • Sound analytic skills and decision-making capabilities, • Strong results orientation and execution capability; Excellent strategic and tactical thinking, • Proven ability to effectively manage multiple priorities in a fast-paced environment and consistently meet deadlines and achieve desired results., • Demonstrated ability to lead, motivate and coach people in varying disciplines to achieve performance goals; Solid team building skills., • Excellent written and verbal communication skills; able to communicate as effectively on the shop floor as in the executive suite. PHYSICAL DEMANDS • Ability to lift 50lbs., • This position is very active and requires standing, walking, bending, kneeling, stooping, crouching, crawling, and climbing throughout the day., • Fine manipulation and repetitive motion may be required for some duties. OTHER • Due to contracts with the United States Government, the candidate must be either a U.S. citizen or a Green card holder. COMPENSATION The anticipated salary range for this position is $120,000 to $140,000 annually. This range reflects the base salary for candidates who meet the requirements of the role, including experience, education, and location. Salary Disclaimer: Where a specific pay range is noted, it is a good-faith estimate only. At the time of this posting, the actual salary offered will be based on experience, skills, qualifications, market/business considerations, and geographic location. BENEFITS • Medical Plan, • Telehealth, • Prescription Drug Program, • Employee Assistance Program (EAP), • Dental Plan, • Vision Plan, • Retirement Plan with company match, • Paid Time Off, • Health Savings Account and/or Flexible Spending Accounts, • Life and AD&D Insurance, • Disability Insurance (Short and Long Term offerings) NOTE The above is presented as a matter of occupational information and guidance only; all other reasonable tasks, duties, and responsibilities that management may deem necessary for satisfactory performance may be included. ABOUT HIGHER TALENT GROUP Higher Talent Group offers candidates full-time opportunities at companies hiring nationwide. We also provide resume and career coaching services for individuals who require assistance in getting back into the workforce or for candidates who want to start looking for a new opportunity discreetly. Want to learn more? Check out our website for additional information.

Job DescriptionSoftware Engineer – Autonomous Weapons & Drone Systems Location: Onsite – Great Neck, NY Type: Full-Time Eligibility: U.S. Citizenship or ITAR-Eligible Status Required Build the intelligence behind the frontier of defense. Wild West Systems designs and builds autonomous drones and munitions for America and her allies - fast, affordable, and battle-ready. As a Software Engineer, you'll develop the code that drives our autonomous platforms: from flight control and perception to mission planning and target engagement. If you crave ownership, speed, and tangible results, this is where software meets steel. About Wild West Systems Wild West Systems is a defense technology startup redefining autonomous edge defense through modular, AI-powered weapon systems - designed, built, and launched in the USA. We fuse domain mastery with creativity to deliver advanced capabilities for modern asymmetric warfare. We move fast, build hard, and engineer for real-world impact. If you're ready to build software that commands machines defending tomorrow's freedom, welcome to the frontier. Why This Role Matters Our software engineers own the digital nervous system of our platforms. You'll work across embedded systems, autonomy pipelines, sensor fusion, and mission logic - turning raw data into real-time decisions. It's full-stack systems engineering, from low-level firmware to high-level ML pipelines, directly integrated with flight hardware and kinetic platforms. Responsibilities • Design and develop production software for drone navigation, guidance, autonomy, and targeting., • Collaborate with hardware and electronics teams to integrate software with real-world sensors, actuators, and propulsion systems., • Own features end to end: requirements, architecture, implementation, testing, deployment, and sustainment., • Develop and optimize AI/ML perception and decision models for autonomous targeting, tracking, and control., • Write clean, well-tested, high-performance code suitable for field deployment., • Contribute to internal tools, CI/CD pipelines, simulation frameworks, and development infrastructure., • Participate in code reviews, design discussions, and rapid iteration cycles in a fast-moving environment.Required Qualifications, • Bachelor's degree in Computer Science, Software Engineering, or a related technical field (or equivalent experience)., • 3+ years of professional software engineering experience., • Proficiency in one or more core languages: Python, C/C++, Rust, Go, or Java., • Demonstrated record of shipping working software (embedded, real-time, or distributed)., • Strong understanding of algorithms, data structures, version control, and software testing., • Experience with machine learning workflows and frameworks (training through deployment)., • Comfortable in Unix/Linux development environments., • Self-directed, ownership-driven, and comfortable in fast-paced, ambiguous conditions., • U.S. Citizenship required under ITAR regulations.Preferred Qualifications, • Experience in defense, aerospace, robotics, or autonomy., • Familiarity with drone/UAV systems, real-time operating systems, or embedded development., • Knowledge of computer vision, SLAM, or sensor fusion., • Experience in edge ML deployment (TensorRT, ONNX, quantization, model optimization)., • Familiarity with cloud/distributed systems (AWS, GCP, Docker, Kubernetes)., • Open-source contributions or strong public portfolio., • Experience at a high-growth startup or technology company with strong engineering practices.Why You'll Love It Here, • Mission that matters: build software that powers the future of autonomous defense., • Small, high-impact team where your work goes directly to the field., • Complete ownership of your projects, without bureaucracy or layers of management., • Competitive salary and outstanding benefits:, • 100% coverage for employee health, dental, and vision insurance, • 90% coverage for spouse and family plansAdditional Information, • This position is onsite only at our Great Neck, NY facility., • Must meet ITAR eligibility (U.S. citizen, permanent resident, refugee, or asylee)., • On-camera interviews required; identity verification may apply., • Company uses E-Verify to confirm employment eligibility., • We do not work with staffing agencies - direct applicants only.

Job Description Family First Home Companions is looking for caring and compassionate Caregivers to become part of our team. We are currently seeking a Caregiver located near Port Washington, NY. If you are interested, apply today to set up an interview. Requirements: Must have work authorization or be a U.S. citizen Two professional work references At least one year of caregiver experience Valid driver’s license and reliable vehicle Contact: Please call Lisa (Recruiter) at 631-319-3961 Office Address: 1777 Veterans Memorial Highway Suite 4 Islandia, NY 11749

Job DescriptionCompany Description Unified Empire Logistics is looking for reliable Delivery Drivers to deliver packages to customers. We are a DSP dedicated to providing excellent delivery experiences to our customers while maintaining a safe work environment. Location: DYY3 at 253-51 Rockaway Boulevard, Woodmere, NY, 11598 Be Part of Our Dedicated Team – Apply Today! Job Description Compensation: $23.75 / hour, paid weekly Benefits of Working with us at Unified Empire Logistics as a Delivery Driver: • Competitive wages, PTO and Seasonal Bonuses, • Collaborative and dynamic work environment, • Opportunities for advancement Delivery Driver Responsibilities: • Work 4 days per week, 10-hour shifts, • Make up to 250 stops per day. You will walk up flights of stairs and walk up long driveways, • Deliver every package directly to the customer’s door (always follow customer notes), • Must be able to lift and carry packages, up to 50 pounds. Each van is equipped with a hand truck for your daily use., • Unified Empire Logistics operates 361 days a year. Your schedule will be from Sunday thru Saturday for full time hours only every week., • Full-time and weekend availability are required, • No set schedules – must be flexible with no schedule exemptions allowed, • You will use a GPS to find addresses. Must understand how to use emerging technology.Qualifications, • Valid driver's license and clean driving record, • Valid work permit if you are a non citizen, • Ability to lift and carry heavy packages, • Ability to work independently and as part of a team Additional Information What We Offer: • Competitive Compensation, • Paid Training, • Paid Time Off (PTO), • Customer branded uniform, • Company vehicle, • Growth opportunity, • Team Culture, • Community interaction, • Medical/Dental/Vision plans, • AFLAC plans, • 401k with Company match, • Financial Wellness Benefit, • Child/Adult Care Referral Service

Job Description Now Hiring Compassionate Caregivers! Location: Melville, NY (Monday–Friday, 8am–5pm) Company: Family First Home Companions – Islandia, NY Join a team that truly values you. At Family First Home Companions, we believe caregivers make the difference. We support your growth, recognize your hard work, and offer consistent opportunities in a caring, professional environment. Current Opening: * Schedule: Monday–Friday, 8am–5pm * Location: Melville, NY * Requirements: Must be able to drive the client and speak English fluently Caregiver Qualifications: * Minimum 1 year of caregiving experience in the U.S. * Fluent in English * Driver’s license and insured vehicle * Must have U.S. work authorization or be a U.S. citizen Ready to Apply? Call Joseline or Lisa at 631-319-3961 to learn more and schedule an interview. Office Address: Family First Home Companions 1777 Veterans Memorial Highway, Suite 4 Islandia, NY 11749

Job Description Quality Inspector - Garden City, New York Must have AS9100 Aerospace experience to qualify for the job About our Client: Our Client is a global provider within a wide range of areas, including but not limited to aerospace and defense platforms, automation and manufacturing, and the medical and healthcare fields, all aiming toward advancing cutting-edge research and development. Higher Talent Group values its reputation for finding high-quality people, which is why we will conduct a screening to determine if this is a good fit for you. We will share further details such as the culture, how progression works within the company, etc. EDUCATION AND/OR EXPERIENCE • High school graduate, • 3-5 Years mechanical inspection, aerospace experience, • Post high school education in math, engineering, inspection techniques or related fields a plus SUMMARY OF POSITION Responsible for first piece inspection, in-process and final products using open set-up, CMM and inspection methods and techniques in accordance with drawing requirements and specifications. Good communication skills, able to read and follow the Client’s work instructions and quality procedures. ESSENTIAL DUTIES AND RESPONSIBILITIES The essential duties and responsibilities of this position are listed below. This list is not all-inclusive and may be amended from time to time. • Read and interpret aerospace engineering drawings using geometric dimensioning and tolerances including and understanding of maximum material conditions, • Inspect detail parts and assemblies per drawing requirement and specs using standard measuring equipment, • Prepare and maintain inspection reports, • Program and/or operate Coordinate Measuring Machine, • Perform Hardness testing, • Collect and tabulate data for SPC use, • Review Supplier F.A.I.R./Generate First Article Reports per AS9102, • Other duties as directed by the management QUALIFICATIONS, KNOWLEDGE, SKILLS, AND EXPERIENCE REQUIRED • Basic computer knowledge including MS Excel and Word, • Interpret drawing requirements/specs and geometric dimensions and tolerances, • Familiar with MIL, NAS, MS, AMS, AWS and AS specifications and standards, • PCDMIS programming skills, • Familiar with special process specifications for heat treat, welding, and non-destructive testing EQUIPMENT USED • Vernier calipers, • Micrometers, • Height Gauges, • CMM machines, • Other standard measuring tools/instruments, • Please note, all Production Floor employees are required to wear steel toe boots. OTHER • Due to contracts with the United States Government, the candidate must be either a U.S. citizen or a Green card holder. COMPENSATION The anticipated salary range for this position is $55,000 to $75,000 annually. This range reflects the base salary for candidates who meet the requirements of the role, including experience, education, and location. Salary Disclaimer: Where a specific pay range is noted, it is a good-faith estimate only. At the time of this posting, the actual salary offered will be based on experience, skills, qualifications, market/business considerations, and geographic location. NOTE The above is presented as a matter of occupational information and guidance only; all other reasonable tasks, duties, and responsibilities that management may deem necessary for satisfactory performance may be included. ABOUT HIGHER TALENT GROUP Higher Talent Group offers candidates full-time opportunities at companies hiring nationwide. We also provide resume and career coaching services for individuals who require assistance in getting back into the workforce or for candidates who want to start looking for a new opportunity discreetly. Want to learn more? Check out our website for additional information.

Job Description Join Our Team of Caring and Compassionate Caregivers! Family First Home Companions – Islandia, NY Are you a compassionate caregiver looking to make a real difference? Join Family First Home Companions—a company that truly values your dedication. We offer a supportive environment where your work is recognized, your growth is encouraged, and new opportunities are always on the horizon. What We’re Looking For: We’re currently hiring experienced caregivers who are passionate about helping others and ready to be part of a dedicated team. Qualifications & Requirements: * Minimum 1 year of caregiver experience in the USA * COVID-19 vaccination ( a plus but not required) * Ability to communicate effectively in English * Valid driver’s license and insured vehicle (a plus, but not required) * Must have work authorization or be a U.S. citizen Interested? Let’s Talk! Call Joseline, our recruiter, at 631-319-3961 ext. 1003 to learn more. Visit us: Family First Home Companions 1777 Veterans Memorial Highway, Suite 4 Islandia, NY 11749

Job Description FP& A Analyst – Garden City, New York - About our Client: Our Client is a global provider within a wide range of areas, including but not limited to aerospace and defense platforms, automation and manufacturing, and the medical and healthcare fields, all aiming toward advancing cutting-edge research and development. (We highly prefer manufacturing background with a facility that deals with the US Government). All items in bold are requirements; if you do not have these then you will not be selected for a phone screen. Higher Talent Group values its reputation for finding high-quality people, which is why we will conduct a screening to determine if this is a good fit for you. We will share further details such as the culture, how progression works within the company, etc. EDUCATION AND/OR EXPERIENCE • Bachelor’s degree in Accounting or Finance, • Professional Certifications: CPA or Master’s degree preferred, • Experience: Minimum 5+ years financial reporting, budgeting, forecasting, and accounting, highly desire working within a manufacturing environment; thorough knowledge of business finance, financial analysis and modeling; 3-5 years of leadership / management experience; public company experience preferred; M&A experience preferred SUMMARY OF POSITION The FP&A Analyst conducts analyses and provides financial insights that support optimal business decision making across the business unit. Reporting to the DVP Business Unit Controller, he/she provides financial consulting and strategic support to senior management, including financial presentations, capital expenditure analyses, assessments of new business opportunities, acquisition analyses, and other projects as requested. ESSENTIAL DUTIES AND RESPONSIBILITIES The essential duties and responsibilities of this position are listed below. This list is not all-inclusive and may be amended from time to time. • Coordinate the consolidation and reporting of business unit financial performance. Review consolidated financial information provided by Business Units for accuracy; identify and analyze significant variances to budget, forecast, and prior year. Communicate reported information to the Business Unit Manager and Business Unit Controller., • Analyze trend data in key performance indicators including Revenue, cost of sales, gross profit margin, expenses and working capital. Communicate findings and areas for improvement to senior management across the business unit., • Assist in quarterly SOX control test procedures as assigned; ensure SOX requirements are met at the Business Unit level., • Provide support to facilities with closings, forecasting, reporting, and analysis as needed, • Oversee and manage continued development of modeling tools for budgeting, financial forecasting, operational planning using best practices, • Implement and work with business intelligence tools and dashboard reports., • Prepare evaluations and financial data for capital investments and business improvement projects in accordance with Corporate guidelines, • Oversee the planning and coordination of the consolidated annual budget process for the business unit in accordance with Corporate guidelines., • Assist in the preparation of presentations to the Division and Executive Office QUALIFICATIONS, KNOWLEDGE, SKILLS, AND EXPERIENCE REQUIRED • Compliance: Understanding of US GAAP and SOX 404 requirements, • Applications: Proficient with MS Office Suite, notably Excel (including pivot tables) and PowerPoint; working knowledge of ERP platforms (SAP, Oracle, Business Central); proficient with financial consolidation reporting tools (HFM) and data analytics tools (Power BI), • Skills: Excellent communication across all levels of the organization (Business Units, Division, Corporate); ability to present confidently to Executive and/or Senior Divisional Leadership Team; ability to meet strict deadlines and work independently. TRAVEL • 10%-20%; business unit site visits, operational reviews, etc. OTHER • Due to contracts with the United States Government, the candidate must be either a U.S. citizen or a Green card holder. COMPENSATION The anticipated salary range for this position is $110,000 to $130,000 annually. This range reflects the base salary for candidates who meet the requirements of the role, including experience, education, and location. Salary Disclaimer: Where a specific pay range is noted, it is a good-faith estimate only. At the time of this posting, the actual salary offered will be based on experience, skills, qualifications, market/business considerations, and geographic location. NOTE The above is presented as a matter of occupational information and guidance only; all other reasonable tasks, duties, and responsibilities that management may deem necessary for satisfactory performance may be included. ABOUT HIGHER TALENT GROUP Higher Talent Group offers candidates full-time opportunities at companies hiring nationwide. We also provide resume and career coaching services for individuals who require assistance in getting back into the workforce or for candidates who want to start looking for a new opportunity discreetly. Want to learn more? Check out our website for additional information.

Job Description We’re Hiring Compassionate Caregivers! Family First Home Companions – Islandia, NY Are you a caring and compassionate individual looking to make a meaningful difference in someone’s life? Join Family First Home Companions, where your dedication is recognized, your growth is supported, and your work truly matters. We’re hiring for full-time, part-time, and live-in positions! Why Work With Us? At Family First, we believe YOU are the difference. We’ll support your career growth, celebrate your great work, and offer you consistent opportunities to make a positive impact. Qualifications: Minimum 1 year of caregiver experience in the USA Ability to communicate in English Valid driver’s license and insured vehicle (a plus, not required) Must have work authorization or be a U.S. citizen Interested? Call Joseline, our recruiter, at: 631-319-3961 ext. 1003

Job Description Responsibilities Description of General Duties: • Provide access control and facility security for NAS Fallon Centroid and Fleet Tactical Training Range facilities., • Carries out instructions primarily oriented toward ensuring that emergencies and security violations are readily discovered and reported to appropriate authority. Intervenes directly only in situations which require minimal action to safeguard property or persons., • Monitors radio communications to maintain range access records. May be required to operate handheld radio., • Observes vehicle traffic and validates facility entrance requirements., • Verifies visitor access and maintains visitor control log., • Issues visitor badges and verifies escort requirements as necessary., • Conducts regular perimeter and building checks., • Responsible for the safekeeping of facilities and equipment and the safeguarding of sensitive information., • Controls building access and performs physical security checks., • Restricts access to facilities to authorized personnel., • Maintains current access roster. Maintains the log of all personnel entering or leaving the facilities., • Responsible for communications with Guard posts and roving patrols and for monitoring passive surveillance and alarms systems., • Develops and maintains emergency incident and response procedures. Responsible for accident/incident reporting., • Issues badges to cleared contractor employees, Government employees, and to visitors who have a valid Visit Authorization Request (VAR) on file., • Visually checks all vehicles entering restricted areas for unauthorized items such as alcohol, cameras, firearms, etc. Assists in annotation of roving patrol personnel in Job Control absence., • Performs all other position related duties as assigned or requested. Qualifications Minimum Education Requirements: • High school diploma or equivalent Minimum Experience Requirements: • Two years’ experience in military or Industrial Security, • Six months’ experience in administrative, technical, clerical, military or other work that involved:, • Written procedures, • Rules or regulations in contacts with coworkers, supervisors, or members of the public to provide a service, • Respond to inquiries, • Obtain information, • Ability to speak, read, and write English Minimum Position-Specific Training Required: • Six months’ experience involved the protection of property against such hazards as fire, theft, damage, accident, trespass, maintaining order, and protecting life, • Capable of comprehending and implementing instructions concerning the operation of mechanical equipment such as generators, air conditioners, fire protection equipment, and other emergency equipment., • Ability to perform in a professional manner and maintain a neat and clean appearance, • Possess a valid state Driver’s License Citizenship and Security Clearance Requirements: • US Citizen, • Obtain and maintain the appropriate level of clearance Certification Requirements: • None Work Environment, Physical Demands, and Mental Demands: • Work is primarily conducted in a single person guard shack located at an access control point., • Occasional lifting to 20 pounds, sitting while using the computer terminal, use of sight, hearing and speech abilities for communication, and constant mental alertness are required., • While performing the duties of this job, the employee is regularly required to stand; use hands to signal and talk or listen., • The employee is required to walk over uneven terrain in low light conditions during periodic rounds several times a shift; and reach with hands and arms., • The employee is occasionally exposed to extreme heat, cold, wet and/or humid conditions., • This position may work one of three shifts that cover a 24-hour period. Later shifts often require that the employee is alone at a remote site., • Must be able to work unsupervised. Reports To: Security Coordinator Other Duties: Please note this job description is not designed to cover or contain a comprehensive list of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. Cayuse is an Equal Opportunity Employer. All employment decisions are based on merit, qualifications, skills, and abilities. All qualified applicants will receive consideration for employment in accordance with any applicable federal, state, or local law.

Job Description Family First Home Companions is looking for caring and compassionate caregivers to become a part of our team. Work for a company that believes you are the difference and will help you grow in your career, recognize you for great work, and provide you with ongoing support and work opportunities. Caregiver Qualifications and Skills: *Must have 1 year experience as a caregiver here in the USA. *The ability to communicate in English. *Possess a valid driver’s license and insured automobile is a plus but not required. • Work authorization or be a USA citizen Please call Joseline the recruiter 631-319-3961 ext 1003 Office address: 1777 Veterans Memorial Highway, Islandia, NY, 11749 Suite 4

Job Description Responsibilities • Follow a RN written plan of care, • Medication reminders, • Dressing, bathing, Toileting, • Keep patient safe and clean, • Light housekeeping, • Prepare meals, • Must have a HHA/PCA certificate, • Must have a completed physical, • Provide references Job Types: Full-time, Part-time Schedule: • 10 hour shift, • 12 hour shift, • 8 hour shift, • Monday to Friday, • No

Job Description Shipping and Receiving Clerk – Garden City, New York About our Client: Our Client is a global provider within a wide range of areas, including but not limited to aerospace and defense platforms, automation and manufacturing, and the medical and healthcare fields, all aiming toward advancing cutting-edge research and development. Higher Talent Group values its reputation for finding high-quality people, which is why we will conduct a screening to determine if this is a good fit for you. We will share further details such as the culture, how progression works within the company, etc. EDUCATION AND/OR EXPERIENCE • High School Diploma or GED Certificate and equivalent experience (On the Job Training), • PC with Windows, Oracle or Database experience is required, • Fluency in English Required SUMMARY OF POSITION This role performs a variety of operations connected with the receipt and shipment of products. • Verify, record and deliver all incoming products, • Enter all receipts in oracle, • Unload all delivery trucks (forklift) outgoing shipments and prepare items for shipping., • Compare identifying information and counts, weights or measure item to verify against invoices, orders or other records. ESSENTIAL DUTIES AND RESPONSIBILITIES The essential duties and responsibilities of this position are listed below. This list is not all-inclusive and may be amended from time to time. • Load and Unload Delivery Trucks, • Receive and deliver all incoming products, • Perform electronic inventory transactions, • Insert items into container, using spacers, fillers, protective passing or using Instapak Foaming Machine., • Bind cartons using tape shooter., • Stamp, stencil or glue identifying information and shipping instructions onto crates or containers., • Post weights, shipping charges and affix postage., • Operate tier-lift truck, forklift truck or use hand truck to move, convey or hoist shipments from packing area to shipping platform., • Bind containers with metal tape, suing strapping machine., • Perform electronic inventory transactions to pull orders to ship., • Navigate to and update customer portals as required daily., • Prepare and type shipping and related documents, such as waybills, express delivery forms and government DD250 forms., • Must have the ability to operate forklifts in a safe manner throughout the facility., • Maintain and organize the work area to assure safe working conditions and support daily visual flow management guidelines., • Perform, as assigned, other similar or related duties. QUALIFICATIONS, KNOWLEDGE, SKILLS, AND EXPERIENCE REQUIRED • Ability to use UPS/Fed-Ex transactions terminals, • Precise and effective phone communication skills, • Ability to work with minimal supervision., • Self-Starter, • Ability to learn and apply new skills, • Accuracy important (systems transactions), • Ability to interact with truck vendors PHYSICAL DEMANDS • Prolonged sitting, standing, and core-body movement required, • Ability to safely lift up to 70lbs, team lift over 70lbs required OTHER • Due to contracts with the United States Government, the candidate must be either a U.S. citizen or a Green card holder. COMPENSATION The anticipated salary range for this position is $30,000 to $50,000 annually. This range reflects the base salary for candidates who meet the requirements of the role, including experience, education, and location. Salary Disclaimer: Where a specific pay range is noted, it is a good-faith estimate only. At the time of this posting, the actual salary offered will be based on experience, skills, qualifications, market/business considerations, and geographic location. NOTE The above is presented as a matter of occupational information and guidance only; all other reasonable tasks, duties, and responsibilities that management may deem necessary for satisfactory performance may be included. ABOUT HIGHER TALENT GROUP Higher Talent Group offers candidates full-time opportunities at companies hiring nationwide. We also provide resume and career coaching services for individuals who require assistance in getting back into the workforce or for candidates who want to start looking for a new opportunity discreetly. Want to learn more? Check out our website for additional information.

Job Description Join Our Team at Family First Home Companions! We are looking for caring and compassionate caregivers to join our team. At Family First Home Companions, we believe you are the difference! We offer a supportive environment where you can grow in your career, receive recognition for your great work, and have access to ongoing support and work opportunities. Positions Available: * Full-time * Part-time * Live-in Caregiver Qualifications and Skills: * Must have 1 year of experience as a caregiver in the USA * Ability to communicate in English * Possessing a valid driver’s license and insured automobile is a plus, but not required * Must have work authorization or be a U.S. citizen How to Apply: Please call Lisa, the recruiter, at 631-319-3961 for more information or to apply. Office Address: 1777 Veterans Memorial Highway, Islandia, NY 11749, Suite 4 We look forward to hearing from you!

Experienced Medical Receptionist - Front Desk, Mineola, Long Island.For Premier Private Ophthalmology Office in Mineola, Long Island (11501), adjacent to Long Island Railroad, Mineola Station and NYU Winthrop University Hospital with affiliated practice in the NYC, East Village (close to Stuyvesant

Allied Universal - - Responsibilities: Provide customer service to clients by carrying out security-related procedures and site-specific policies; Respond to incidents and critical situations in a calm, problem-solving manner; Conduct regular and random patrols throughout the location and perimeter

Call Center / Remote] - Anywhere in U.Competitive pay / Medical, dental & vision / 401k / PTO - As a Customer Service Rep at Planet Home Lending, you will: Respond to borrower inbound calls concerning their account, ensuring high quality service and adhering to productivity and regulatory requiremen

Abacus Service Corporation - - Responsibilities: Transport materials and pallets to requesting departments and storage areas as needed.

Protos Security - - Responsibilities: Maintain an orderly post and remain at that post unless otherwise directed by the client contact or Security Manager.Maintain situational and tactical awareness throughout shift.Remain alert and always prepared, follow established safety and security protocols.

Allied Universal - JobID: 1540448 [Security Officer] As a Security Guard at Allied Universal, you'll: Be responsible for the Security and Safety of the client's property and personnel; Know all site-specific policies and procedures, and implement emergency response activities as appropriate; Handle

Morning, Overnight (Includes Weekends).EARN A BONUS UP TO $2,500! Hiring immediately!.At Wegmans our commitment is to provide incredible service, to which the foundation is ensuring our customers, employees, and visitors, feel safe and secure while operating on our grounds.As a Wegmans Security Offi

Allied Universal - - Responsibilities: Provide customer service to passengers, visitors, and/or personnel by carrying out security-related procedures, site-specific policies, and when appropriate, emergency response activities at a government transportation location.Respond to incidents, disturbanc

Northwell Health - 270-05 76th Ave [Safety Officer / Security Guard] As a Security Officer at Northwell Health, you'll: Patrol and monitor buildings and grounds to protect life and property and to prevent fire, thefts, vandalism; Enforce access control policy and secure doors, locks, etc.Control and

Securitas - - Responsibilities: Maintain a strong, visible presence to deter theft and ensure public safety; Conduct regular patrols of the property, including stores, parking areas, and common spaces; Monitor surveillance systems and respond to security incidents promptly and professionally; Provi

Allied Universal - - Responsibilities: Provide customer service to clients by carrying out security-related procedures, site-specific policies, and/or appropriate emergency response activities; Respond to incidents and critical situations in a calm, problem-solving manner; Conduct regular and rando