Trabajos citizen en Dallas, TexasCrear alertas

A MISSION WORTHY OF A CAREER! If you’re looking for “just a job,” then stop reading right now. But, if you’re looking for a long-term federal law enforcement career, one that makes a difference every day to our country and its citizens, then the U.S. Border Patrol (USBP) would like you to take the first step to becoming an entry level Border Patrol Agent. USBP is hiring immediately to fill full-time, entry-level, career positions in federal law enforcement where your prior experience in public safety, security, military police or law enforcement may qualify. Train and work with an elite team of professionals whose camaraderie, pride, and sense of purpose are hallmarks of their daily mission of protecting America. Now is the time to make your move because, along with excellent base pay, exceptional benefits, and job stability, USBP is offering up to $60,000 in additional incentives (see details below). Salary and Benefits Annual Base Salary for newly appointed BPAs varies per grade, as follows: Newly appointed Border Patrol Agents (as defined in ___) will be offered up to a $20,000 incentive. The first $10,000 will be paid upon successful completion of the Border Patrol Academy, with the remaining $10,000 awarded for accepting a prioritized location. Prioritized locations include Sierra Blanca, TX; Presidio, TX; Sanderson, TX; Comstock, TX; Lordsburg, NM; Freer, TX; Hebbronville, TX; Ajo, AZ. Newly appointed Border Patrol Agents may also qualify for up to $40,000 in additional incentives distributed over their first four years. Duty Locations IMPORTANT NOTICE: Duty assignments available at the time of offer may include the Southwest Border, including prioritized locations. U.S. Border Patrol determines duty assignments at the time of offer based on operational needs, which may or may not align with candidates’ first-choice preferences. RELOCATION MAY BE REQUIRED. Duty location impacts pay rates; locality pay for federal law enforcement is higher in some locations than others. A fully trained BPA may be eligible for up to an additional 25% of base pay per the BPA Pay Reform Act of 2014. This is a career ladder position with a grade level progression of GL-5, GL-7, GL-9, GS-11, and GS-12. You will be eligible for a promotion to the next higher grade level (without reapplying) once you successfully complete 52 weeks in each grade level. Duty Locations: You will be asked to select your preferred location for one of the following mission critical locations: • Big Bend Sector Stations - *Presidio, Van Horn, *Sanderson, Alpine, *Sierra Blanca, Marfa, • Buffalo Sector Stations - Wellesley Island, • Del Rio Sector Stations - Del Rio, Brackettville, *Comstock, Eagle Pass North, Eagle Pass South, Carrizo Springs, Uvalde, • El Paso Sector Stations - Alamogordo, Clint, Deming, El Paso, Fort Hancock, Las Cruces, *Lordsburg, Santa Teresa, Ysleta, • El Centro Sector Stations - El Centro, Indio, Calexico, • Grand Forks Sector Stations - Pembina, • Havre Sector Stations - Havre, Malta, Plentywood, Scobey, Sweetgrass, • Houlton Sector Stations - Calais, Fort Fairfield, Jackman, Rangeley, Van Buren, • Laredo Sector Stations - Laredo South, Cotulla, *Hebbronville, Laredo West, *Freer, Laredo North, Zapata, • Rio Grande Valley Sector Stations - Rio Grande City, Fort Brown, McAllen, Brownsville, Falfurrias, Weslaco, Kingsville, Harlingen, • San Diego Sector Stations - Boulevard, Brownfield, Campo, Chula Vista, Imperial Beach, Murrieta, San Clemente, • Spokane Sector Stations - Colville, Curlew, Metaline Falls, Oroville, • Swanton Sector Stations - Beecher Falls, Burke, Champlain, Newport, Richford, • Tucson Sector Stations - *Ajo, Tucson, Nogales, Douglas, Brian A Terry, Sonoita, Casa Grande, Three Points Substation, Willcox As a BPA, you will be part of our 60,000+ workforce that strives to protect the American people by safeguarding our borders, deterring illicit activity, and enhancing the nation’s economic prosperity. Being a BPA makes you a valuable member of the Federal Law Enforcement Officer (LEO) profession. Typical assignments include: • Detecting and questioning people suspected of violating immigration and custom laws and inspecting documents and possessions to determine citizenship or violations, • Preventing and apprehending undocumented noncitizens and smugglers of noncitizens at or near the borders by maintaining surveillance from covert positions to include using infrared scopes during night operations, • Interpreting and following tracks, marks, and other physical evidence of illegal entry of persons or contraband, • Performing farm checks, building checks, traffic checks, city patrols, and transportation checks You qualify for the GL-5 grade level if you possess one of the following: Experience: One (1) year of general work experience that demonstrates the ability to take charge, make sound decisions, and maintain composure in stressful situations; to learn regulations, methods, and techniques through classroom training and/or on-the-job instruction; and the ability to gather concise information through questioning, observation, and examination of documents and records; OR Education Substitution: A bachelor's degree or successful completion of a full four-year course of study in any field leading to a bachelor's degree from an accredited college or university; OR Combination of Experience and Education: A combination of general work experience AND successfully completed college education. This will be calculated using your resume and official or unofficial transcripts submitted with your application. You qualify for the GL-7 grade level if you possess one of the following: Experience: One year of specialized work experience that shows you have the skills necessary to: • Make sound judgments and decisions in the use of firearms., • Deal effectively with people in a courteous and tactful manner in connection with law enforcement matters. Education Substitution for the GL-7 grade level: A bachelor's degree with superior academic achievement, which is based on (1) class standing, (2) grade-point average (i.e., GPA of 3.0 or higher out of a possible 4.0), or (3) honor society membership. Or will receive a bachelor's degree with Superior Academic Achievement. Or one full year of graduate-level education in a field of study related to law enforcement (e.g., criminal justice, homeland security, justice studies, law enforcement, courts and judicial systems, forensic technology, forensic psychology, or corrections and rehabilitation) from an accredited college or university; OR A Combination of Experience and Education: This will be calculated using your resume and official or unofficial transcripts submitted with your application. Note: If you have previous or current law enforcement or military law enforcement experience, you may qualify at the GL-9 and or GS-11 grade level. Please refer to the BPA GL-9 - 11 announcement. Other Requirements Citizenship: You must be a U.S. Citizen to apply for this position. Residency: You must have had primary U.S. residency (includes protectorates as declared under international law) for at least three of the last five years. Age Restriction: In accordance with Public Law 100-238, this position is covered under law enforcement retirement provisions. Candidates must be referred for selection to the Border Patrol Agent position before reaching their 40th birthday in accordance with Department of Homeland Security Directive 251-03. The age restriction may not apply if you are currently serving or have previously served in a federal civilian law enforcement (non-military) position covered by Title 5 U.S.C. 8336(c) or Title 5 U.S.C. 8412(d). Veterans’ Preference: You may also be eligible for an excepted service Veterans Recruitment Appointment (VRA). The age restriction does not apply if you are Veterans' Preference eligible. Formal Training: After you are hired, you will be detailed to the U.S. Border Patrol Academy in Artesia, New Mexico, for approximately six (6) months of intensive instruction in immigration and nationality laws, law enforcement and USBP-specific operations, driver training, physical techniques, firearms, and other courses. Border Patrol work requires the ability to speak and read Spanish, as well as English. Border Patrol Agents will be provided training to become proficient with the Spanish language at the Academy. How to Apply: Click the Apply button on this site. You will be linked to the CBP Talent Network registration page. For Position of Interest, select Border Patrol Agent, then complete the pre-screening questions. You’ll then receive a link(s) to the BPA Job Opening Announcements (JOAs) on USAJOBS, the federal government’s official employment site, to complete your application. Be certain to review ALL details of the job opportunity announcement and follow all instructions in the application process, including items (resume, transcripts, etc.) to submit. You will be evaluated based on your resume, supporting documents, and the BPA Entrance Exam. If you have questions about the application process, contact a recruiter through the U.S. Border Patrol page: ___ As a subscriber to the CBP Talent Network, you’ll receive monthly emails with information about webinars, career expos, and future opportunities with CBP.

SAME MISSION, NEW DRIVE! You love protecting your community and doing your part to keep our nation safe. But maybe you’re looking for a change of scenery? USBP is hiring immediately for full-time, career positions, where your prior law enforcement officer (LEO) experience may qualify you for higher-graded Border Patrol Agent (BPA) opportunities. Continue making a difference with the nation's premier federal agency charged with securing our borders and protecting our country. Whether you gained this experience as part of a military police unit or as a member of a state or local law enforcement organization, you have an opportunity to work with highly trained professionals whose camaraderie, pride, and purpose are hallmarks of their daily mission. Check out the duties and responsibilities section below, along with the qualifications section to see if you are eligible. Now is the time to make your move, along with excellent base pay, location pay, exceptional benefits, and job stability, USBP is offering up to $60,000 in additional incentives to newly appointed Agents (see details below). DON’T FORGET TO CHECK OUT THE INCENTIVES – SEE SALARY SECTION BELOW IMPORTANT NOTICE: Duty assignments available at the time of offer may include the Southwest Border, including prioritized locations. U.S. Border Patrol determines duty assignments at the time of offer based on operational needs, which may or may not align with candidates’ first-choice preferences. Relocation may be required. U.S. Customs and Border Protection (CBP) is hiring immediately for these full-time, career Law Enforcement Officer (LEO) opportunities. Salary and Benefits: Salary for newly appointed law enforcement Border Patrol Agents varies from: • Base Salary: GL-9/GS-11, $65,545 - $124,717per year, • Locality Pay: Varies by duty location. All Border Patrol Agents may select from an array of federal employment benefits that include health and insurance plans, a generous annual and sick leave program, and participation in the Thrift Savings Plan, a retirement plan that is similar to traditional and ROTH 401(k) offerings. Newly appointed Border Patrol Agents (as defined in ___) will be offered up to a $20,000 incentive. The first $10,000 will be paid upon successful completion of the Border Patrol Academy, with the remaining $10,000 awarded for accepting a prioritized location. Prioritized locations include Sierra Blanca, TX; Presidio, TX; Sanderson, TX; Comstock, TX; Lordsburg, NM; Freer, TX; Hebbronville, TX; Ajo, AZ. Newly appointed Border Patrol Agents may also qualify for up to $40,000 in additional incentives distributed over their first four years. Duty Locations: You will be asked to select your preferred location for one of the following mission critical locations: • Big Bend Sector Stations - *Presidio, Van Horn, *Sanderson, Alpine, *Sierra Blanca, Marfa, • Buffalo Sector Stations - Wellesley Island, • Del Rio Sector Stations - Del Rio, Brackettville, *Comstock, Eagle Pass North, Eagle Pass South, Carrizo Springs, Uvalde, • El Paso Sector Stations - Alamogordo, Clint, Deming, El Paso, Fort Hancock, Las Cruces, *Lordsburg, Santa Teresa, Ysleta, • El Centro Sector Stations - El Centro, Indio, Calexico, • Grand Forks Sector Stations - Pembina, • Havre Sector Stations - Havre, Malta, Plentywood, Scobey, Sweetgrass, • Houlton Sector Stations - Calais, Fort Fairfield, Jackman, Rangeley, Van Buren, • Laredo Sector Stations - Laredo South, Cotulla, *Hebbronville, Laredo West, *Freer, Laredo North, Zapata, • Rio Grande Valley Sector Stations - Rio Grande City, Fort Brown, McAllen, Brownsville, Falfurrias, Weslaco, Kingsville, Harlingen, • San Diego Sector Stations - Boulevard, Brownfield, Campo, Chula Vista, Imperial Beach, Murrieta, San Clemente, • Spokane Sector Stations - Colville, Curlew, Metaline Falls, Oroville, • Swanton Sector Stations - Beecher Falls, Burke, Champlain, Newport, Richford, • Tucson Sector Stations - *Ajo, Tucson, Nogales, Douglas, Brian A Terry, Sonoita, Casa Grande, Three Points Substation, Willcox As a BPA, you will be part of our 60,000+ workforce that strives to protect the American people by safeguarding our borders, deterring illicit activity, and enhancing the nation’s economic prosperity. Being a BPA makes you a valuable member of the Federal Law Enforcement Officer (LEO) profession. Typical assignments include: • Detecting and questioning people suspected of violating immigration and customs laws and inspecting documents and possessions to determine citizenship or violations., • Preventing and apprehending aliens and smugglers of aliens at or near the borders by maintaining surveillance from covert positions to include using infrared scopes during night operations., • Interpreting and following tracks, marks, and other physical evidence of illegal entry of persons or contraband., • Performing farm checks, building checks, traffic checks, city patrols, and transportation checks. GL-9: You qualify for the GL-9 grade level if you possess one (1) year of specialized experience, equivalent to at least the next lower grade level, performing duties such as: • Performing physical searches of detained individuals, their vehicles, and their immediate surroundings for weapons, contraband, currency, and other evidence., • Apprehending, physically restraining, or working with law enforcement officials to identify or apprehend violators of state, federal, or immigration laws. GS-11: You qualify for the GS-11 grade level if you possess one year of specialized experience equivalent to at least the next lower grade level, with the authority granted by the state or government to enforce laws, make arrests, and investigate crimes, performing primary duties in an official law enforcement capacity such as: • Utilizing intelligence information to track illegal operations, criminal activity, threats to our nation, and/or contraband while serving as a state, federal, or military law enforcement official., • Leading investigations of fraud, contraband, criminal activity, threats to our nation, and/or illegal operations to determine sources and patterns while serving as a state, federal, or military law enforcement official. There are no education substitutions for the GL-9 or GS-11 grade-level Border Patrol Agent opportunities. Other Requirements: Citizenship: You must be a U.S. Citizen to apply for this position. Residency: You must have had primary U.S. residency (including protectorates as declared under international law) for at least three of the last five years. Age Restriction: In accordance with Public Law 100-238, this position is covered under law enforcement retirement provisions. Candidates must be referred for selection to the Border Patrol Agent position before reaching their 40th birthday in accordance with Department of Homeland Security Directive 251-03. The age restriction may not apply if you are currently serving or have previously served in a federal civilian law enforcement (non-military) position covered by Title 5 U.S.C. 8336(c) or Title 5 U.S.C. 8412(d). Veterans’ Preference: You may also be eligible for an excepted service Veterans’ Recruitment Appointment (VRA). The age restriction does not apply if you are Veterans' Preference eligible. Formal Training: After you are hired, you will be detailed to the U.S. Border Patrol Academy in Artesia, New Mexico, for approximately six (6) months of intensive instruction in immigration and nationality laws, law enforcement, and USBP-specific operations, driver training, physical techniques, firearms, and other courses. Border Patrol work requires the ability to speak and read Spanish, as well as English. Border Patrol Agents will be provided training to become proficient in the Spanish language at the Academy. How to Apply: Click the Apply button on this site. You will be linked to the CBP Talent Network registration page. For Position of Interest, select Border Patrol Agent, and then complete the pre-screening questions. You’ll then receive a link(s) to the BPA Job Opening Announcements (JOAs) on USAJOBS, the federal government’s official employment site, to complete your application. Be certain to review ALL details of the job opportunity announcement and follow all instructions in the application process, including items (resume, transcripts, etc.) to submit. You will be evaluated based on your resume, supporting documents, and the BPA Entrance Exam. If you have questions about the application process, contact a recruiter through the U.S. Border Patrol page: ___. NOTE: As a subscriber to the CBP Talent Network, you’ll receive monthly emails with information about webinars, career expos, and future opportunities with CBP.

Date Posted: 2026-01-07 Country: United States of America Location: HTX36: Richardson, TX 3200 E Renner Rd , Richardson, TX, 75082-2402 USA Position Role Type: Onsite U.S. Citizen, U.S. Person, or Immigration Status Requirements: Active and transferable U.S. government issued security clearance is required prior to start date. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance Security Clearance: DoD Clearance: Secret Do you want to be a part of something bigger? A team whose impact stretches across the world, and even beyond? Our Product Safety team helps civilian, military and government customers complete their most complex missions — whatever and wherever they may be. Our customers depend on us for intelligent and secure communications, missionized systems for specialized aircraft and spacecraft and collaborative space solutions. By joining our team, you’ll have your own critical part to play in ensuring our customer succeeds today while anticipating their needs for tomorrow. Are you up for the challenge? Join our mission today. Our industry-leading experts are setting the standards for the aerospace industry and paving the way for the future. But as new challenges present themselves, we need fresh, creative and motivated minds to overcome these hurdles, help us break barriers and achieve new levels of innovation. Do you have what it takes to join a global, diverse organization that doesn’t shy away from big opportunities? If so, we invite you to join our ranks and create the next generation of aerospace technologies. Together, we will nurture an engineering culture that values intellectual curiosity, risk takers and integrity. A place where we will challenge ourselves, our teams, and the status quo and where we will work to find a way – the right way – to achieve what others can only dream of. We are currently searching for a Senior Reliability & Maintainability Engineer to join our team in Richardson, TX or Cedar Rapids, IA. What YOU will do: * Supports program development through the application of reliability and maintainability techniques. * Participates in all phases of program life cycle, utilizing reliability and maintainability methodologies as they apply in our systems engineering processes in accordance with military standards such as MIL-HDBK-217, MIL-HDBK-338B, MIL-HDBK-470, MIL-STD-1629A. * Provides support to reliability and maintainability modeling and predictions analysis, testability analysis, maintainability and built-in-test demonstrations, environmental testing, FMEA/FMECA, and FRACAS. * Provides input to the development of Failure Modes Effects and Criticality Analysis (FMECA), Reliability & Maintainability analysis and predictions, Reliability Critical Items List, and Failure Reporting, Analysis, and Corrective Action System (FRACAS) * Serve as a Reliability & Maintainability representative to engineering and business leadership Qualifications YOU Must Have: * Typically requires a degree in Science, Technology, Engineering or Mathematics (STEM) and minimum 5 years prior relevant experience or an Advanced Degree in a related field and minimum 3 years of experience * Active and transferable Secret U.S. government issued security clearance is required prior to start date with the ability to obtain Top Secret after start. * U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance * Two (2) years of experience with systems engineering lifecycle, with knowledge of how to apply reliability and maintainability techniques to systems requirements * One (1) year of demonstrated experience supporting design and development teams to develop, assess, and verify Reliability & Maintainability related requirements for mission-critical systems * Three (3) years of experience in conducting/developing Failure Modes Effects and Criticality Analysis (FMECA), Reliability & Maintainability analysis and predictions, Reliability Critical Items List, and Failure Reporting, Analysis, and Corrective Action System (FRACAS), Built In Test (BIT) design / verification analysis, and/or testability analysis Qualifications We Prefer: * Knowledge of systems architectures and designs * Knowledge of basic circuit analysis and the ability to perform detailed analyses on complex systems * Understanding of military aircraft-related missions, functional operation, performance specifications, and validation techniques * Experience planning and conducting Accelerated Stress Testing, or a willingness to learn and apply those techniques, such as Highly Accelerated Life Test processes (HALT), Reliability Enhancement Test (RET), Environmental Stress Screening (ESS), Highly Accelerated Stress Screening (HASS) * Experience using industry recognized tools such as Relyence, Reliasoft, Windchill, or eXpress * Familiarity with agile development and model-based systems engineering (MBSE) * Good presentation skills with the ability to present to a variety of audiences * Strong oral and written communication skills, with the ability to effectively interact and build trust with team members from many different backgrounds, including engineering management, engineering teams, program management, business development, support groups, and subcontractors * Experience in technical proposal preparation related to Reliability & Maintainability What We Offer: * Medical, dental, and vision insurance * Three weeks of vacation for newly hired employees * Generous 401(k) plan that includes employer matching funds and separate employer retirement contribution, including a Lifetime Income Strategy option * Tuition reimbursement program * Student Loan Repayment Program * Life insurance and disability coverage * Optional coverages you can buy pet insurance, home and auto insurance, additional life and accident insurance, critical illness insurance, group legal, ID theft protection * Birth, adoption, parental leave benefits * Ovia Health, fertility, and family planning * Adoption Assistance * Autism Benefit * Employee Assistance Plan, including up to 10 free counseling sessions * Healthy You Incentives, wellness rewards program * Doctor on Demand, virtual doctor visits * Bright Horizons, child and elder care services * Teladoc Medical Experts, second opinion program * May be eligible for Relocation * And more! Learn More & Apply Now! Mission Systems: Do you want to be a part of something bigger? A team whose impact stretches across the world, and even beyond? At Collins Aerospace, our Mission Systems team helps civilian, military and government customers complete their most complex missions — whatever and wherever they may be. Our customers depend on us for intelligent and secure communications, missionized systems for specialized aircraft and spacecraft and collaborative space solutions. By joining our team, you’ll have your own critical part to play in ensuring our customer succeeds today while anticipating their needs for tomorrow. Are you up for the challenge? Join our mission today. • Please consider the following role type definitions as you apply for this role. Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products. At Collins, the paths we pave together lead to limitless possibility. And the bonds we form – with our customers and with each other – propel us all higher, again and again. Apply now and be part of the team that’s redefining aerospace, every day. #Hotjobs As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote. The salary range for this role is 86,800 USD - 165,200 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate’s work experience, location, education/training, and key skills. Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement. Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company’s performance. This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply. RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act. Privacy Policy and Terms: Click on this link to read the Policy and Terms

Ready to take your medical career further while making a real impact? The U.S. Navy is seeking fully trained, U.S. board‑certified Anesthesiologists to serve part‑time —providing world‑class care to service members and their families. Why Serve as a Navy Reserve Physician? Maintain your civilian career while serving as a Navy Reserve Officer A flexible, part‑time commitment. Drill locally one weekend per month Complete one two‑week annual training period at a military treatment facility Opportunities for humanitarian missions, global travel and operational deployments Full‑time roles may also be available Exceptional Benefits & Incentives Up to $50,000 bonus or $40,000/year in student loan repayment (up to $250,000) Three‑year involuntary deployment deferment Access to commissary, exchange and base facilities $500,000 Servicemembers’ Group Life Insurance Tricare Reserve Select health and dental coverage for you and your family Military retirement after 20 qualifying years , plus Thrift Savings Plan 36 months of education benefits through the Forever GI Bill—transferable to dependents VA home loan eligibility Eligibility U.S. Citizen Ages 21–64 Actively practicing medicine U.S. categorically matched residents may apply Must meet Navy physical, legal, credentialing and security standards This is more than a part‑time role—it’s a chance to practice medicine with purpose. If you’re driven to serve, lead and make a lasting difference, we’d love to speak with you. Direct Contact: Osmel Alfonso

SO OTHERS MAY LIVE When disaster strikes, Aviation Rescue Swimmers don't hesitate-they jump. Into raging seas, hurricane winds, and combat zones, they go where others won't- to bring people back alive. As part of the world's most elite Special Operations force, Navy AIRRs execute life-or-death rescues in the most extreme conditions. Whether pulling survivors from sinking ships, saving downed pilots, or braving towering waves, they live by one mission: so others may live. That motto isn't just a phrase-it's a promise. And they prove it every time they leap into the unknown. Enlisted None WATCH VIDEOS ABOUT AIRR Aviation Rescue Swimmer Naval Aircrewman Helicopter - Sierra Naval Aircrewman Helicopter - Romeo Naval Aircrewman: MH-60 Romeo & MH-60 Sierra AVIATION RESCUE SWIMMER: CAREER DETAILS & REQUIREMENTS Responsibilities Aviation Rescue Swimmers are tasked with entering treacherous conditions to assist with rescue missions, humanitarian assistance, and operational support. One day you may be evacuating families on the other side of the globe amidst a catastrophic storm, and the next day rescuing the crew of a ship off the Pacific coast or saving a mountain climber hanging from an inaccessible cliff. Depending on your role, duties may include: Coordinating with pilots as an Aircrewman aboard helicopters Saving the crew of downed aircraft, people aboard stranded or capsized vessels at sea, or hikers and mountain climbers in danger Rescuing civilians during natural disasters in collaboration with other forces such as the Coast Guard Delivering aid and supplies to other countries in humanitarian operations Providing support to Naval Special Warfare Operations Conducting surveillance in anti-submarine warfare and drug interdiction operations Operate radar, Forward Looking Infrared sensors, missile systems and door guns in anti-surface operations Transporting troops and cargo to and from ships In this role, you will specialize as a Naval Aircrewman Helicopter (AWS) or a Naval Aircrewman Tactical Helicopter (AWR). Naval Aircrewman Helicopter (AWS) AWS's operate various aircraft systems to support a range of mission types including: Surface Warfare Search and Rescue Combat Search and Rescue Naval Special Warfare Airborne Mine Countermeasure Logistics Naval Aircrewman Tactical Helicopter (AWR) AWR's operate various aircraft systems to support a range of mission types including: Anti-Submarine Recon & Intelligence Anti-Surface Ship Search and Rescue Combat Search and Rescue Naval Special Warfare Fire Support Work Environment As an AIRR, you will operate in almost every type of extreme environment and may be assigned to Helicopter Sea Combat (HSC) or Helicopter Maritime Strike Squadrons (HSM) sea or shore duty in any part of the world. You could be assigned to squadrons at Naval Air Stations and may deploy aboard aircraft carriers, surface combat ships and support ships. Training & Advancement Aviation Rescue Swimmers must be prepared to operate in any challenging environment. It's why two years of training in advanced swimming and lifesaving techniques, helicopter mission equipment and helicopter weapons systems are required before you report to your first squadron. Throughout training, candidates are continually tested mentally and physically as they advance to more rigorous and challenging scenarios. Upon completion of initial training at Recruit Training Command Great Lakes (known as Boot Camp), those pursuing an Aircrewman role undergo the following training pipeline: Aviation Rescue Swimmer School Prep Course (2 weeks) in Pensacola, FL. Aircrew Candidate School (4 weeks) in Pensacola, FL, to learn Naval Aviation fundamentals, intermediate water survival, aviation physiology and advanced water survival. Rescue Swimmer School (6 weeks) in Pensacola, FL, to learn search and rescue techniques. Class "A" Technical School (8-14 weeks) in Pensacola, FL, learning one of the Aircrew Ratings (AWF, AWO, AWS, AWR, AWV). SERE School (2 weeks) in North Island, CA, or Portsmouth, NH, to train in Survival, Evasion, Resistance and Escape (SERE) techniques. Fleet Replacement Squadrons (28-52 weeks) location dependent on aircrew rating in one of five locations (Jacksonville, FL, Norfolk, VA, San Diego, CA, Oklahoma City, OK, Ft Worth, TX) for basic flight and aircraft weapons systems training. After graduation, an AIRR may be assigned to a helicopter command at sea or on shore duty in various locations throughout the world, Japan, Guam, Spain, or the continental US including San Diego, CA, Norfolk, VA, Jacksonville, FL, Fallon, NV, Whidbey Island, WA, Key West, FL and many others. Advanced Education & Training Based on performance and the needs of the Navy, you could potentially be eligible to receive additional training in: Emergency Medical Technician (EMT) training Helicopter Inland Rappel School (mountain & cliff rescue training) Advanced Search and Rescue School Senior enlisted AIRRs may also be selected to become: Schoolhouse instructors Weapons instructors Master rappelers/instructors Post-Service Opportunities Specialized training received and work experience gained in the course of service can lead to valuable credentialing and occupational opportunities in related fields in the civilian world whether you're an AWS or AWR. Education Opportunities Members of the Naval Special Warfare community have any number of unique opportunities to advance their knowledge. Navy training provides skills and knowledge in everything from military tactics and small arms use to survival and a number of other tactical military procedures. Beyond offering access to professional credentials and certifications, Navy training in this field can translate to credit hours toward a bachelor's or associate degree through the American Council on Education. You may also continue your education through undergraduate degree opportunities like the Navy College Program and Tuition Assistance and the Post-9/11 GI Bill. Qualifications & Requirements No college degree is required to become an AIRR, but a high degree of difficulty comes standard with nearly everything you'll do. Training is tough and ongoing. You should be in excellent physical condition and a strong swimmer. To qualify for Rescue Swimmer Training, both men and women must: Meet specific eyesight requirements: uncorrected vision no worse than 20/100; correctable to 20/20 in both eyes with normal depth and color perception Meet the minimum Armed Services Vocational Aptitude Battery (ASVAB) score: VE+AR+MK+MC=210 or VE+AR+MK+AS=210 Pass a PST in DEP/Boot Camp Pass Class 1 Flight Physical Be 30 years of age or younger Must be a U.S. citizen and eligible for security clearance The Minimum and Elevated Navy Physical Screening Test (PST & EPST) requirements for AIRR are: Exercise Time Min. Elevated Swim 500 yards (freestyle) Unlimited 12:00 9:00 Push-up 2:00 42 65 Sit-up 2:00 50 65 Pull-up 2:00 04 10 Run 1.5 miles Unlimited 12:00 10:15 Candidates who achieve the Elevated Physical Screening Test (EPST) scores shown above may qualify for the Enlisted Bonus for Shipping (EB-SHP) program. These elevated standards must be met during your 14-day shipping PST to be eligible for the bonus. Learn more about Navy enlistment bonuses. NOTE: You should consult your physician or other health-care professional before starting any exercise regime or other fitness program to determine if it is right for your needs. This is particularly true if you (or your family) have a history of medical illnesses or ailments that could be made worse by a change in physical activity. Do not start a fitness program if your physician or health-care provider advises against it. General qualifications may vary depending upon whether you're currently serving, whether you've served before or whether you've never served before. Part-Time Opportunities There are no part-time jobs as a Navy Reserve Sailor in this role. Go back to Careers to find other jobs that have a Reserve component. You can also find out more about what life is like as a Reserve Sailor in the Navy. Aviation Rescue Swimmer - PST Full HTML CAN YOU OUTPERFORM TOP AIRR CANDIDATES? Check the AIRR PST leaderboard and find a testing event near you. Learn More Compare Navy Careers See how a career as a Religious Services Careers compares to other Navy jobs. Compare roles, pay and requirements for each job now.

Company Description Smiths Interconnect, is a global leader in the design and manufacture of high-performance interconnect solutions. Our products are used in mission-critical applications across industries such as aerospace, defense, telecommunications, and industrial markets. At Smiths Interconnect, we are committed to innovation, quality, and providing cutting-edge solutions that connect the world's most demanding systems. Smiths Interconnect is part of Smiths Group. For over 170 years, Smiths has been pioneering progress by engineering for a better future. We serve millions of people every year, to help create a safer, more efficient and productive, and better-connected world across four global markets: energy, security & defense, space & aerospace and general industrial. Listed on the London Stock Exchange, Smiths employs c.16,000 colleagues in over 50 countries. Job Description Produces machined parts by setting up and operating a computer numerical control (CNC) machine; maintaining quality and safety standards; keeping records; maintaining equipment and supplies. Responsibilities: \n • Setup and operation of Fanuc & HAAS CNC milling centers using Master CAM software. • Utilize blueprints, sketches, drawings, specifications, or sample parts to determine dimensions and tolerances of finished work piece, sequence of operations, and setup requirements.\n, • Work to close tolerances using required gauges and inspection knowledge.\n, • Document information pertaining to setup and operation of each job utilizing written descriptions, sketches and/or photos.\n, • Train junior operators/apprentices.\n, • Perform other tasks as assigned.\n\n Qualifications Qualifications: \n • 3-7 years of manual machining and CNC setup and operation utilizing conversational programming.\n, • Proficiency in Master CAM software preferred\n, • Must have a high work ethic, be a team player and work with a since of urgency.\n, • Ability to read and comprehend complex machine and component drawings.\n, • Ability speak/read English and understand verbal instructions.\n, • Ability to analyze and solve problems.\n, • Detailed oriented, self-motivated, ability to work well with limited supervision.\n, • Ability to train others.\n, • Ability to work overtime and on weekends as needed for the position.\n\n Travel %: 0-10% Security: Please State if US Citizen or permanent Resident Required Additional Information All your information will be kept confidential according to EEO guidelines. We believe that different perspectives and backgrounds are what make a company flourish. All qualified applicants will receive equal consideration for employment regardless of color, religion, sex, sexual orientation, gender identity, national origin, economic status, disability, age, or any other legally protected characteristics. We are proud to be an inclusive company with values grounded in equality and ethics, where we celebrate, support, and embrace diversity. At no time during the hiring process will Smiths Group, nor any of our recruitment partners ever request payment to enable participation - including, but not limited to, interviews or testing. Avoid fraudulent requests by applying jobs directly through our career's website (Careers - Smiths Group plc)

NB: Looking for US Citizen or Green Card holder as per the client's domain. Required Skills & Experience: • 10+ years of experience in SAP SD / OTC as a techno-functional consultant., • Proven experience with configuration of Sales Orders, Delivery, Pricing, Billing, Credit Checks, and Account Receivables., • Strong ABAP debugging skills and knowledge of enhancement frameworks., • Experience in SAP Hybris / SAP Commerce Cloud integration with SAP backend systems., • Solid understanding of B2B/B2C eCommerce flows including cart, checkout, pricing sync, and order replication., • Deep knowledge of integration touchpoints across SAP modules (FI, MM, WM, GTS)., • Experience working in Agile/Waterfall environments with global delivery teams., • Strong communication, leadership, and documentation skills.

Senior Business Intelligence Analyst – Dallas– $120,000 - $130,000 Are you looking for a high-impact analytics role where you can blend data engineering, BI development, and business partnership? Join an established, nationwide healthcare services organization as they expand their Business Intelligence function. Enjoy autonomy, collaborative leadership, and the chance to directly shape enterprise reporting across a rapidly growing environment. Who you are: • Bachelor’s degree in Business, Finance, Computer Science, or a similar field., • 4+ years of enterprise business analytics and reporting experience., • Skilled with SQL and Tableau; Power BI knowledge, or willingness to learn required., • Ability to interpret business needs, effectively communicate insights, and partner effectively with stakeholders., • Develop, enhance, and automate dashboards and reports—primarily in Tableau., • Translate business requirements into actionable analytics solutions and visualization prototypes., • Support multiple business units through data exploration, dashboard builds, and ad? hoc analysis., • Mostly remote; standard hours 8am–5pm CT with travel to the Dallas area required once every few months., • Collaborative leadership known for trust, empowerment, and internal promotion., • Medical, dental, vision, 401(k) with company match, PTO, holidays, tuition reimbursement, and advancement opportunities. Compensation is determined by several factors, which may include skillset, experience level, and education. The expected range for this role is $120,000 to $130,000 per year. Please note this range is an estimate and actual pay may vary based on qualifications and experience. What’s next? Please email your resume to if you’re excited to explore this opportunity. We actively support and promote people of various backgrounds, from race, religion, and gender to geographic area, university, lifestyle, and personality type. Proven Recruiting is minority-owned, majority women, and is a strong advocate for diversity and inclusion in the broader community. Apply today!

Overview Industry leader in the casino industry, is looking for a Sr. Product Manager to help build and develop a brand new product for their organization. To note: this role is on-site in Dallas, TX, and does require the candidate to be a US Citizen or have their Permanent Residency (Green Card). Responsibilities: • Partner with stakeholders to define and execute product vision and roadmap, prioritizing features by business value, user impact, and technical feasibility., • Translate high-level requirements into clear user stories, PRDs, product specifications, and regulatory documentation., • Manage and prioritize product backlog; support Agile rituals (sprint planning, stand ups, sprint reviews); track KPIs and drive releases., • Work closely with engineering, QA, UI/UX, operations, and business teams to ensure alignment and timely delivery., • Regulatory Compliance: Ensure product features and processes meet relevant regulations and standards., • Maintain awareness of casino industry trends and competitor offerings, while apply insights to product direction., • Use AI to automate routine product tasks to summarize user research, generate user stories and acceptance criteria, create release notes and test-case suggestions, and surface data-driven insights for continuous improvement. Qualifications: • Bachelor's degree or equivalent work experience, • 5+ years of experience as a Product Manager or similar role in the gaming industry., • Proven AI fluency: Demonstrated experience using AI/ML tools to prioritize, automate, and generate product artifacts (user stories, specs, summaries)., • Knowledge of API and integration., • Familiarity with Data, analytics and insights., • Proficiency with product tools (Jira, Confluence, Figma)., • Basic understanding of security and application architecture., • Knowledge of customer/Loyalty systems, casino systems, and/or Hospitality industry., • Technical credibility (former engineer or deep technical collaboration experience)., • Existing industry relationships or vendor familiarity in the hospitality / gaming space. Next Steps: Do you want to build out a brand new product with an industry leader? Send your resume, along with your application, and let's chat!

This is a GRANT FUNDED position, as part of the Department of Education Charter Schools Program CMO Replication and Expansion Grant. 100% of this position's time and effort must be spent in support of the CSP CMO Replication and Expansion Grant. Funding for this position is contingent upon the continuation of grant funds. Primary Purpose: Provides support and counseling to current alumni in college (focusing on college persistence, degree and certification completion, and career readiness). Alumni Advisor advocates for greater support and investment for ILTexas alumni, including low-income, underrepresented, and/or first generation college students to help eliminate barriers to college matriculation and graduation. This role requires excellent communication and attention to detail and deadlines. Qualifications: Must be a U.S. citizen or Permanent Resident. Education/Certification: ● Bachelor’s degree in Education or a related field from an accredited university Special Knowledge/Skills: ● 2+ years’ experience working in college readiness, college success, and/or college access ● Excellent communication skills ● Bilingual preferred but not required Major Responsibilities and Duties: 1. Building relationships with campus support offices including financial aid, student support services, counseling, and career services on college campuses where our alumni enroll and helping students identify and use necessary support offices., 2. Teaching ILTexas alumni who are not making satisfactory academic progress how to seek support and improve their academic standing through seminars or one-on-one tutoring sessions., 3. Providing ILTexas alumni with consistent information on college scholarships and organizations focused on college persistence and completion., 4. Outreaching to and supporting ILTexas alumni who are not enrolled in college and creating college matriculation plans for those students., 5. Tracking ILTexas alumni progress and data (contact information, grades, financial aid, scholarships, etc.) and identifying trends among college-aged alumni., 6. Aiding ILTexas alumni in planning for transition to work or graduate school at the completion of college and other post-secondary programs., 7. Providing opportunities for ILTexas alumni to mentor or network with high school students to encourage increased college-going and enrollment in post-secondary programs., 8. Providing ILTexas with feedback regarding academic rigor, school culture, and counseling services of the various colleges alumni attend., 9. Must have access to insured and reliable transportation in order to travel to and from ILTexas campuses and college/university campuses at which ILTexas alumni are enrolled., 10. Collaborate with ILTexas departments such as (but not limited to) Guidance and Counseling, Academic Success Program, Advanced Academics, Student Leadership, etc. to ensure that ILTexas alumni receive adequate supports for post-secondary completion., 11. Other duties as assigned. Mental Demands/Physical Demands/Environmental Factors: Tools/Equipment Used: Standard office equipment including computer and peripherals, standard instructional equipment. Posture: Moderate standing; occasional kneeling, squatting, bending, and stooping Motion: Moderate walking Lifting: Regular light lifting and carrying (less than 15 pounds) Environment: Work inside and outside (exposure to sun, heat, cold, and inclement weather); exposure to noise Mental Demands: Work with frequent interruptions; maintain emotional control under stress. This document describes the general purpose and responsibilities assigned to this job and is not an exhaustive list of all responsibilities and duties that may be assigned or skills that may be required.

Due to the domain of the end client we only require US Citizen or Green Card. Skill set required At least 7+ years’ experience in developing integrations using PI/PO and S/4, specifically in the following areas but not limited to: • Object Oriented ABAP, • IDOC development, • Enhancement (User-Exists, BADIs), • Well versed with FEH, • Performance tuning, Code Review, • Experience developing interfaces using SAP PI/PO 7.4, 7.5, • Hands-on experience with common adapters (SFTP, JDBC, JMS, REST, SOAP, oDATA, IDOC), • Thorough knowledge of PI architecture The consultant is expected to leverage ABAP and PI solutions tied to integrations using the above methods/technologies.

Application Deadline: 30 June 2026 Department: Federal Services Location: Dallas County, TX Compensation: $15.00 / hour Description TeleSolv Consulting is seeking a detail-oriented Mail Clerk to support government operations and high-volume administrative and document handling workflows. This position supports the federal government, and all applicants must be local to the designated duty location. The Mail Clerk plays a vital role in supporting the Government’s ongoing mission by ensuring the accurate handling, routing, and processing of incoming and outgoing correspondence and documentation. This role requires strong attention to detail, organizational skills, and the ability to manage time-sensitive materials in a fast-paced environment. This position supports a Government office responsible for program and project management operations. The Mail Clerk contributes to workflows that ensure timely communication, proper documentation handling, and administrative efficiency across teams. Responsibilities: • Receive, sort, and distribute incoming mail and packages to appropriate personnel., • Prepare outgoing mail, including labeling, packaging, and coordinating shipments., • Maintain logs and tracking systems for incoming and outgoing correspondence., • Ensure proper filing and organization of physical and electronic documents., • Assist with scanning, copying, and digitizing large volumes of documents., • Support administrative functions such as document preparation, data entry, and records management., • Coordinate with staff to ensure timely routing of sensitive or priority communications., • Maintain document control processes to ensure accuracy and completeness of records., • Utilize systems such as Microsoft Office and shared databases to manage correspondence and files., • Provide general office support including scheduling assistance, meeting coordination, and supply management., • Perform additional duties as assigned to support daily operational needs. Qualifications: • Must be a U.S. Citizen., • High school diploma or equivalent., • Ability to obtain a Public Trust/Suitability Clearance through the Government., • Prior experience in mail handling, clerical support, or administrative roles., • Strong organizational skills with the ability to manage high volumes of documents and correspondence., • Experience with document tracking systems and office equipment (scanners, copiers, mail meters)., • Proficiency in Microsoft Office Suite (Word, Excel, Outlook)., • Ability to follow detailed procedures and maintain confidentiality of sensitive information., • Strong attention to detail and ability to meet deadlines in a fast-paced environment., • Effective communication skills and ability to coordinate across multiple teams. Benefits: TeleSolv Consulting offers a competitive compensation package including medical, dental, and vision insurance; 401(k) retirement savings plan with company match; paid time off (vacation, sick leave, and paid holidays); short- and long-term disability coverage; life insurance; and opportunities for professional development and training. Additional benefits may include telework options (if applicable), flexible scheduling, employee wellness programs, and performance-based incentives. About TeleSolv: Join the TeleSolv Team on our mission to provide quality and unparalleled service to our clients. We are a growing organization that provides a variety of professional and administrative services to public and private organizations with global operations. Rated in the top 1000 businesses in 2019 by Inc.com. Since its founding in 2000, TeleSolv has been committed to helping organizations solve complex problems. Our solutions integrate sound management principles with the most appropriate technologies to assist senior executives in effectively managing programmatic, schedule, and technical risks. TeleSolv offers excellent compensation, training, advancement opportunities, and exceptional benefits including PTO, sick leave, up to 11 paid federal holidays, medical, dental, vision, company paid life, short-term and long-term disability insurance, employee assistance program, and matching 401(k) plan. Background Investigation: This position requires that you obtain a background investigation. As part of this process, the government will perform a criminal, credit, tax, employment, and drug history background check. The government has varying tolerances, with mitigating circumstances, for issues in all of the categories. The government is essentially looking to confirm that you are generally in good financial standing, up to date on your tax filings, rehire eligible with your prior employers, and have adhered to any federal restrictions on illegal drug use, including marijuana, in addition to other checks related on your character and trust worthiness.

Job ID: 713889BR Date posted: Mar. 18, 2026 Description: You will be the General Maintenance Mechanic for the Maintenance Team. Our team is responsible for ensuring operational readiness of plant facilities and supporting production equipment. What You Will Be Doing As the General Maintenance Mechanic you will be responsible for a broad spectrum of construction, maintenance, repair, and fabrication tasks that keep our facilities running smoothly. Your responsibilities will include, but are not limited to: \n • Perform preventative maintenance on rooftop units, air handlers, hoists, paint booths, and other critical equipment.\n, • Construct and repair structures such as storage sheds, metal frames, security fencing, and equipment foundations.\n, • Fabricate and install steel, sheet‑metal, shelving, racks, benches, and air‑duct systems.\n, • Operate heavy machinery, rig loads, and move large equipment safely.\n, • Maintain clean work areas, report issues, and support the lead supervisor.\n\n Why Join Us Do you want to be part of a company culture that encourages employees to build their career, apply their knowledge while using cutting‑edge technology, and achieve challenging goals? We provide the foundation and resources to help you stay motivated, inspired, and productive. If you are driven, dedicated, and enjoy doing what you love, then we want you to join our journey and build a better tomorrow with you. We are committed to supporting your work‑life balance and overall well‑being, offering flexible scheduling options. Learn more about Lockheed Martin's comprehensive benefits package here. Further Information About This Opportunity This position is in Dallas. Discover more about our Dallas, Texas location. MUST BE A U.S. CITIZEN - This position is located at a facility that requires special access. Basic Qualifications: • High school degree or equivalent, • At least 3-5 years of related experience, • Must be able to work on 1st or 2nd shifts as defined by the Collective Bargaining Agreement, • Experience operating forklift With our employees as our priority, we provide diverse career opportunities designed to propel, develop, and boost agility. Our flexible schedules, competitive pay, and comprehensive benefits enable our employees to live a healthy, fulfilling life at and outside of work. We place an emphasis on empowering our employees by fostering an inclusive environment built upon integrity and corporate responsibility. If this sounds like a culture you connect with, you're invited to apply for this role. Or, if you are unsure whether your experience aligns with the requirements of this position, we encourage you to search on Lockheed Martin Jobs, and apply for roles that align with your qualifications. Experience Level: Hourly/Non-Exempt Business Unit: MISSILES AND FIRE CONTROL Relocation Available: No Career Area: Facilities Type: Full-Time Shift: First

Position: Controls & Integration Engineer I, Mechanical Location: Remote Job Id: 917 of Openings: 1 TITLE: Controls & Integration Engineer I, Mechanical LOCATION: Dallas, TX POTISION SUMMARY: Controls Engineers are responsible for designing, developing, installing, and maintaining equipment used to monitor and control systems, equipment and processes. They work in various industries including building management systems, power system automation and protection systems. Controls engineers are technical experts in areas such as advanced process control, instrumentation, distributed control systems, PLCs, and SCADA systems. Controls engineers use these skills to design and implement solutions to our customers' complex needs. Specific areas of expertise for this position include monitoring and control systems in Data Centers and /or mission critical environments. Experience in Building Automation Systems (BASS) and field device configuration such as field level controllers, PLCs, protocol converters, and SCADA/HMI software. Experience in Electrical Power Monitoring Systems (EPMS) and configuration/programming of electrical gear interfaces is beneficial. ESSENTIAL DUTIES AND RESPONSIBILITIES: To perform this job successfully, an individual must be able to perform the following satisfactorily; other duties may be assigned. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Technical Responsibilities • Design / Engineering, • Assists Senior Engineers in design documents for SCADA/Automation projects, • Developing design document narratives, • Perform requirements analysis, • Understanding of Sequence of Operations (SOO) / System Functional Documentation, • Create Subsystem Designs (CAD / Panels / Layouts / Wiring / SCADA Screens / Hardware / Communications), • Comment Resolution, • Reviews and comments on 3rd party design documents for SCADA/Automation projects in support of large programs/projects, • Review design document narratives, • Perform execution and design scope gap analysis, • Review Sequence of Operations / System Functional Documentation to ensure compliance with project requirements, • Review Subsystem Designs (CAD / Panels / Layouts / Wiring / SCADA Screens / Hardware / Communications) for project compliance, • Assist in reviewing project specifications, • Assist in creation of testing plans and procedures for Integrated Systems Factory Testing, • Programming, • Program / configure / troubleshoot Controllers, PLCs, RTUs, and/or HMI systems, • Testing / Troubleshooting / Deployment / Commissioning, • Assist senior engineers in creating and updating testing and commissioning procedures, • Preparation of test reports, • Originates test procedures, • Commissioning of deployed systems, • Development of test equipment and simulation devices, • Perform Factory and Field TestingMaintenance, • Maintenance, • Perform troubleshooting on service calls to existing and legacy system operators, • Perform hardware / software upgrades and replacements on existing systems Managerial Responsibilities, • Estimates, • Assists senior engineers in preparation of cost estimates and supporting documentation, • Work with relevant stakeholders to review scope of project, • Conduct any surveys, inspections, tours, etc. of client sites, as required, • Assists senior engineers in evaluation and pricing of change orders from vendors, • Personnel Management, • Assigns tasks and coordinates with Technical Staff, • Provides technical direction and on-the-job training to drafters, engineering technicians, and less experienced engineers. QUALIFICATIONS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Education/Experience:, • Bachelor's degree in electrical or mechanical engineering and 2-5 years field experience, • Associate degree in the electrical or mechanical field (add 3 years field experience), • High school diploma (add 5 years field experience), • 2-5 years' experience with designing and servicing controls systems for chiller plants, complex air distribution equipment, equipment installation, and testing, • Experience in reading mechanical and control schematics, • Experience in building automation systems (BAS) startup, configuration, and calibration, • Experience in testing and troubleshooting control systems, • Experience using basic electrical and hand tools, • Experience using testing, calibration, or industry-specific tools and software, • Experience testing, reading/verifying all voltage and current inputs to relays; verifying all metering (local and SCADA); calibrating all relays; trip testing (local and SCADA); verifying all alarms (local and SCADA); verifying all alarms (local and SCADA); verifying all function switches, etc., • Experience with test equipment and test equipment software, • Experience with networking design, configuration, and troubleshooting, • Experience with air handlers, chiller plant systems and data center CRAC units, • Ability to travel up to 80%, • MUST BE A US CITIZEN Computer/Networking Skills:, • Experience in OT and IT networking technologies and topologies, • Experience troubleshooting and diagnosing OT and IT networks and protocols, • Experience in CAD/CAE Software (Visio, AutoCAD), • Experience in schedule management software (Project, Primavera P6), • Standard Office Software (Microsoft Word, Excel, Access etc.) Certificates and Licenses:, • Required Certifications, • Certification in one or more PLC / Automation Platform, such as: Niagara N4, Schneider, Rockwell, Siemens, JCI, ALC, Distech, etc., • Certification in one or more SCADA platforms, such as: Iconics, Ignition, Aveva, etc., • Preferred Licenses / Certifications, • Design Build Institute of America (DBIA), • Certified SCADA Security Architect (CSSA), • Certified Automation Professional (CAP) Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions., • While performing the duties of this job, the employee is regularly exposed to computer screens for an extended period of time; Sitting for extended periods of time; Reach by extending hands or arms in any direction; Have finger dexterity in order to manipulate objects with fingers rather than whole hands or arms, for example, using a keyboard; Listen to and understand information and ideas presented through spoken words and sentences; Communicate information and ideas in speaking so others will understand; Read and understand information and ideas presented in writing; Apply general rules to specific problems to produce answers that make sense; Identify and understand the speech of another person. The above job description is not intended to be an all-inclusive list of duties and standards of the position. Incumbents will follow any other instructions, and perform any other related duties, as assigned by their supervisor. CPG is an equal opportunity employer. We will consider all employment applicants without attention to age, race, color, religion, sex, sexual orientation, gender identity, national origin, veteran, or disability status. *We utilize E-Verify #LI-TG1 Pay Range: $85,996 - $129,050 per year Apply for this Position

Position: Controls Technician I Location: Dallas, TX Job Id: 924 of Openings: 1 TITLE: CONTROLS TECHNICIAN I LOCATION: Dallas, TX POSITION SUMMARY: Controls Technicians monitor the control systems of automated equipment. They use software to verify that the controls are within certain parameters and work to quickly troubleshoot problems when they arise to avoid or minimize interruptions to production. The Controls Technicians II works under general supervision, independently performing the essential functions at an advanced level. ESSENTIAL DUTIES AND RESPONSIBILITIES: To perform this job successfully, an individual must be able to perform the following satisfactorily; other duties may be assigned. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. * Responsible for providing an advanced level of expertise in maintaining, troubleshooting, and servicing all aspects of the building automation systems. * Must have the ability to maintain, improve, and participate in troubleshooting HVAC equipment serving throughout mission critical facilities. * Install, configure, test and maintain application software and system management tools * Oversight and hands-on troubleshooting experience with electrical and mechanical systems are desired, across the spectrum of technologies that support continuous operations. * Basic writing and verbal skills are required. Effectively communicate with the site management team and the customer to understand requirements and solve complex facility system problems. * An understanding or ability to quickly learn electrical and mechanical systems along with prior experience with facilities system troubleshooting is highly desirable. * This position may collaborate with other specialized technicians, mechanics or subcontractors to perform facility-related maintenance and repairs. * Provides instruction, mentors and trains less skilled technicians as needed. * Mechanical and Electrical systems oversight, oversee and monitor all components of the site infrastructure to ensure operational integrity. * Participate in test & commissioning phases of construction for validation of programming * Perform data integration of equipment utilizing various field protocols (BACnet, Modbus, etc.) * Monitor's suppliers and third-party vendors as required * Communicate with remote and local supporting personnel via email and telephone * Demonstrates attention to detail, good comprehensive and analytical skills, and excellent organizational skills. * Understands company policies and enforces safety regulations. Safely performs functions of the position including following proper safety guidelines such as job hazard analysis and lockout/tag-out procedures. * Operates a variety of equipment such as hand tools, laptop computers and diagnostic hardware to perform work. * Other duties as assigned by Manager or Supervisor. QUALIFICATIONS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Education/Experience: * High school diploma or demonstrated equivalent. * Five years of experience performing Control System / Building Automation/Management System service and repair in a data center, heavy industrial, or pharmaceutical/biomedical environment, or demonstrated equivalent combination of education and experience. * Knowledge of data center infrastructure including related HVAC and electrical equipment. * Preferred experience with Tridium Niagara (AX/N4) or other systems such as ALC, Honeywell, Schneider Electric and Siemens and associated instrumentation. * Experience troubleshooting Control Systems, BAS/BMS systems including but not limited to (Automated Logic, Honeywell, Siemens, Edstrom, etc.) * Possess knowledge of Building Systems sequence of operations * Experience diagnosing, troubleshooting and repairing process mechanical systems * MUST BE A US CITIZEN Computer Skills: * Proficient knowledge of Microsoft Office and software Certificates and Licenses: * No certificates or licenses required Supervisory Responsibilities: * No supervisory responsibilities Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. * While performing the duties of this job, the employee is regularly required to sit; Standing and walking is required. The noise level in the work environment is usually moderate. The employee must occasionally lift and carry up to 50 pounds. The above job description is not intended to be an all-inclusive list of duties and standards of the position. Incumbents will follow any other instructions, and perform any other related duties, as assigned by their supervisor. Benefits to Joining Our Team CPG offers a competitive and comprehensive package that includes additional benefits beyond enhanced medical, dental, and vision coverage • Health Benefits - (Medical, Dental & Vision Insurance), • Flexible Spending Account Options, • 401K Plan, • Employer paid Life & Disability Insurance, • Paid Time Off, • Employee Referral Program Learn more about CPG by checking out our website ___ #LI-TG1 Pay Range: $31.25 - $46.91 per hour Apply for this Position

Position: Sr Project Manager (DCI) Location: Dallas, TX Job Id: 962 of Openings: 1 TITLE: Sr Project Manager - construction LOCATION: Dallas, TX POSITION SUMMMARY: As Senior Project Manager you will be responsible for providing overall leadership and driving success of multiple facets of data center projects. The position covers all aspects of construction. Areas of expertise require autonomy and independent discretion in the following areas: ESSENTIAL DUTIES AND RESPONSIBILITIES: To perform this job successfully, an individual must be able to perform the following satisfactorily; other duties may be assigned. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • RFP development and budgeting, • Pre-bid oversight and coordination, • Managing all design phases and documents, • Conduct project meetings, publish, and distribute minutes, develop milestones, and maintain monthly reports, • Manage day-to-day office and field operations., • Review the plans and specifications for constructability and construction schedules. Advise the project team of any issues or deficiencies., • Prepare, manage, and update the detailed project schedule with sequence and activity duration including procurement items., • Customer engagement for sales and fulfillment of requirements, • Coordination and supervision of design-build contractors, • Coordination with internal stakeholders and subject matter experts, • Oversight of physical construction activities, • Participation in commissioning, • The management of close out and hand-off of physical data center and project documents to customer, • Collaborate with the design team, operators, and clients, • Submit monthly project financial reporting, including forecasting, cash-flow, etc., • Review monthly contractor billing and perform job walks to substantiate progress, • Keeps all relative parties informed of progress throughout the life of the project, • Develop, manage, maintain, and assist with contract negotiation of new and existing vendors, • Oversee RFI and Submittal Review Process, • Manage the Change Order Process with Owner and Subcontractors, • Manage input and delivery of work products from internal team members to ensure that new data center spaces comply with the project requirements, customer requirements, all engineering standards, applicable codes, and specifications., • Understand project budget/estimate and budget set-up, • Develop and understand trade contractor and supplier contract scopes, with a constant focus on procurement and lead-time of materials to maintain schedule, • Develop, document, and drive lessons learned, process improvements, cost, and schedule savings initiatives throughout the project lifecycle., • Work closely with the proposal team to coordinate design criteria with budgetary issues and ongoing maintenance and operation of existing facilities., • Awareness of the importance of mission-critical facility operation, • Safety standards knowledge and enforcement. (OSHA 30 Hour preferred), • *Schedule shifts may incl nights/weekends as per bell curve requirements, • Additional duties may be assigned as project needs adjust at Management's discretion, • Must be a US Citizen QUALIFICATIONS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Education/Experience (Desired):, • Bachelor of Science in Construction Management, or a similar field, or equivalent experience, • Construction/Engineering/Architectural degree a plus, • 10+ years of experience in managing construction projects required, • Datacenter experience is preferred, • Experience in CSA (civil, structural, architectural) and MEP (mechanical, electrical, plumbing) construction management is a requirement Computer Skills:, • Competency in Microsoft Office applications, including Word, Excel, Outlook, and Teams, • Proficient in PROCORE Certificates and Licenses:, • No certificates or licenses required Supervisory Responsibilities:, • Supervise one or more Superintendent or Project Coordinator or Assistant PM or Project Manager or combination of various roles Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions., • Occasionally lift and/or move 10 to 50 pounds. Frequently required to stand, walk, stoop, kneel, crouch or crawl; occasionally required to sit and climb or balance. Specific vision abilities required include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust and focus. The above job description is not intended to be an all-inclusive list of duties and standards of the position. Incumbents will follow any other instructions, and perform any other related duties, as assigned by their supervisor. CPG is an equal opportunity employer. We will consider all employment applicants without attention to age, race, color, religion, sex, sexual orientation, gender identity, national origin, veteran, or disability status. We utilize Everify #LI-TG1 Apply for this Position

Position: MEP Manager, Electrical Location: Dallas, TX Job Id: 720 of Openings: 1 TITLE: MEP MANAGER, ELECTRICAL LOCATION: Dallas, TX POSITION SUMMMARY: The MEP Manager, Electrical will lead efforts coordinating the Electrical trades on major construction projects and work with the Project Team to ensure successful installation and completion of all MEP trade work. ESSENTIAL DUTIES AND RESPONSIBILITIES: To perform this job successfully, an individual must be able to perform the following satisfactorily; other duties may be assigned. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. * Estimate and scope MEP trades during pre-construction (as applicable / future support) * Review Contract Documents, making suggestions/modifications as they relate to the MEP trades and approved construction drawings and specifications * Review BOD for MEP compliance * Review and coordination of submittals and shop drawings * Act as Energy Marshall in the isolation and energization of all electrical equipment in accordance with the safety plan. * Assist Superintendent and Field Staff in managing MEP subcontractors throughout duration of the project (from groundbreaking through commissioning and turnover to owner) * Assist with scheduling MEP installation activities * Review, inspect, and provide oversight of construction drawings during MEP installation * Work with Superintendent on project logistics and temporary facility plans * Review and comment on scope, material, and equipment for MEP systems prior to installation * Monitor the installation and start-up of MEP systems and commissioning of project with Engineer & Owner * Inspect MEP installation during construction. * Review Coordination and Arc Flash studies * Review and provide field verification of torque and meggar reports provide by trades, and assure reports are submitted during final turnover * Coordinate activities, materials procurement and other related activities with Project Superintendent and Field Staff * Communicate progress and prepare appropriate reports as needed (Procore) * Represent SE MCS regarding the MEP process at weekly Owners and contractors' meetings * Mentor project staff, if applicable * Lead and direct the coordination process to resolve all conflicts during installations and start-up * Perform other duties as assigned. * Significant local travel (within DFW region) required for this role - 70%-100% *Schedule shifts may incl nights/weekends as per bell curve requirements QUALIFICATIONS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Education/Experience (Desired): * Bachelor's/Associates Degree a plus or comparable experience in mechanical, electrical or fire protection/life safety engineering, construction management. * Construction trade specific experience with increasing levels of responsibility and demonstrated abilities to direct the work of others. Must be a US Citizen Computer Skills: * Proficient in Microsoft Office or related software, Procore preferred Certificates and Licenses: * Master Electrical License preferred * OSHA 30 preferred Supervisory Responsibilities: * Supervises subordinate employees. Carries out supervisory responsibilities in accordance with the organization's policies and applicable laws. Responsibilities include interviewing, hiring, and training employees; planning, assigning, and directing work; appraising performance; rewarding and disciplining employees; addressing complaints and resolving problems. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. * Occasionally lift and/or move up to25pounds, and ability to bend, stoop, kneel, crouch, or crawl. Frequent use of hands to fingers, and ability to reach with hands and arms. Specific vision abilities required include close vision, ability to adjust focus, and ability to see color. Requires eye-hand coordination and manual dexterity sufficient to operate office equipment. Requires normal range of hearing and eyesight to record, prepare and communicate written or online documentation. Involves contact withother individuals. Frequent sitting, standing, and walking. Work is performedprimarilyindoors. The above job description is not intended to be an all-inclusive list of duties and standards of the position. Incumbents will follow any other instructions, and perform any other related duties, as assigned by their supervisor. CPG is an equal opportunity employer. We will consider all employment applicants without attention to age, race, color, religion, sex, sexual orientation, gender identity, national origin, veteran, or disability status. CPG Participates in E-Verify Pay Range: $113,752 - $170,661 per year Apply for this Position

Position: MEP Manager, Electrical cx Location: Dallas, TX Job Id: 1012 of Openings: 1 TITLE: MEP MANAGER, ELECTRICAL LOCATION: Dallas, TX POSITION SUMMMARY: The MEP Manager, Electrical will lead efforts coordinating the Electrical trades on major construction projects and work with the Project Team to ensure successful installation and completion of all MEP trade work. ESSENTIAL DUTIES AND RESPONSIBILITIES: To perform this job successfully, an individual must be able to perform the following satisfactorily; other duties may be assigned. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. * Estimate and scope MEP trades during pre-construction (as applicable / future support) * Review Contract Documents, making suggestions/modifications as they relate to the MEP trades and approved construction drawings and specifications * Review BOD for MEP compliance * Review and coordination of submittals and shop drawings * Act as Energy Marshall in the isolation and energization of all electrical equipment in accordance with the safety plan. * Assist Superintendent and Field Staff in managing MEP subcontractors throughout duration of the project (from groundbreaking through commissioning and turnover to owner) * Assist with scheduling MEP installation activities * Review, inspect, and provide oversight of construction drawings during MEP installation * Work with Superintendent on project logistics and temporary facility plans * Review and comment on scope, material, and equipment for MEP systems prior to installation * Monitor the installation and start-up of MEP systems and commissioning of project with Engineer & Owner * Inspect MEP installation during construction. * Review Coordination and Arc Flash studies * Review and provide field verification of torque and meggar reports provide by trades, and assure reports are submitted during final turnover * Coordinate activities, materials procurement and other related activities with Project Superintendent and Field Staff * Communicate progress and prepare appropriate reports as needed (Procore) * Represent SE MCS regarding the MEP process at weekly Owners and contractors' meetings * Mentor project staff, if applicable * Lead and direct the coordination process to resolve all conflicts during installations and start-up * Perform other duties as assigned. * Significant travel required for this role - 70% (rotating two weeks on project site and one week working remote) *Schedule shifts may incl nights/weekends as per bell curve requirements Must be a US Citizen QUALIFICATIONS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Education/Experience (Desired): * Bachelor's/Associates Degree a plus or comparable experience in mechanical, electrical or fire protection/life safety engineering, construction management. * Construction trade specific experience with increasing levels of responsibility and demonstrated abilities to direct the work of others. Computer Skills: * Proficient in Microsoft Office or related software, Procore preferred Certificates and Licenses: * Master Electrical License preferred Supervisory Responsibilities: * Supervises subordinate employees. Carries out supervisory responsibilities in accordance with the organization's policies and applicable laws. Responsibilities include interviewing, hiring, and training employees; planning, assigning, and directing work; appraising performance; rewarding and disciplining employees; addressing complaints and resolving problems. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. * Occasionally lift and/or move up to25pounds, and ability to bend, stoop, kneel, crouch, or crawl. Frequent use of hands to fingers, and ability to reach with hands and arms. Specific vision abilities required include close vision, ability to adjust focus, and ability to see color. Requires eye-hand coordination and manual dexterity sufficient to operate office equipment. Requires normal range of hearing and eyesight to record, prepare and communicate written or online documentation. Involves contact withother individuals. Frequent sitting, standing, and walking. Work is performedprimarilyindoors. The above job description is not intended to be an all-inclusive list of duties and standards of the position. Incumbents will follow any other instructions, and perform any other related duties, as assigned by their supervisor. CPG is an equal opportunity employer. We will consider all employment applicants without attention to age, race, color, religion, sex, sexual orientation, gender identity, national origin, veteran, or disability status. CPG Participates in E-Verify Pay Range: $113,752 - $170,661 per year Apply for this Position

Location US-TX-Dallas ID 2026-9786 Category Customer Service/Support Position Type Full-Time Employee Type Regular Location Type Onsite Serving the People Who Serve the People Granicus is driven by the excitement of building, implementing, and maintaining technology that is transforming the Govtech industry by bringing governments and its constituents together. We are on a mission to support our customers with meeting the needs of their communities and implementing our technology in ways that are equitable and inclusive. Granicus has consistently appeared on the GovTech 100 list over the past 5 years and has been recognized as the best companies to work on BuiltIn. Over the last 25 years, we have served 5,500 federal, state, and local government agencies and more than 300 million citizen subscribers power an unmatched Subscriber Network that use our digital solutions to make the world a better place. With comprehensive cloud-based solutions for communications, government website design, meeting and agenda management software, records management, and digital services, Granicus empowers stronger relationships between government and residents across the U.S., U.K., Australia, New Zealand, and Canada. By simplifying interactions with residents, while disseminating critical information, Granicus brings governments closer to the people they serve-driving meaningful change for communities around the globe. Want to know more? See more of what we do here. Granicus' Swagit team is looking for a talented Audio / Video (AV) Installation Technician for a full-time position on our deployment team, based out of Dallas, TX. If you have installation/technician experience in the audio/video industry, or a strong understanding of audio/video signal flow plus installation technician experience in a related field, then this is the opportunity for you. As an AV install technician with Swagit you'll experience high visibility and the chance to work with a dedicated team committed to providing excellent customer service. If you have a passion for innovative technology and are looking for the chance to join a team at a critical point in our growth, then you'll find a satisfying career with Swagit! **Candidates must live within a commutable distance to the Dallas office. Build AV broadcast systems to defined specifications including PTZ cameras, switchers, automation and streaming. • Determine the resources needed to complete new broadcast installations based on the deployment installation plans, diagrams and blueprints., • Travel to customer sites for buildout of structured cabling and, • Installation/testing of broadcast systems., • Communicate with customers and peers throughout the spec, build and installation phases., • Troubleshoot systems including signal flow, software and basic networking issues., • Thorough knowledge of audio/video broadcast equipment (2 years)., • Sound understanding of computer hardware installation and troubleshooting (2 years)., • Basic power tool, carpentry and construction knowledge., • Structured cabling experience for existing walls and pre-construction wire installation., • Extron, Crestron, AMX or similar presentation system experience a plus., • Live broadcast production (directing, camera operator, etc.) experience., • Strong organizational and communication skills., • Climb ladders, lift over 50lbs, work in tight spaces, • Travel up to two weeks out of each month Security and Privacy Requirements • Responsible for Granicus information security by appropriately preserving the Confidentiality, Integrity, and Availability (CIA) of Granicus information assets in accordance with the company's information security program., • Responsible for ensuring the data privacy of our employees and customers, their data, as well as taking all required privacy training in a timely manner, in accordance with company policies. The Team • We are a remote-first company with a globally distributed workforce across the United States, Canada, United Kingdom, India, Armenia, Australia, and New Zealand. The Culture • A few culture highlights include - Employee Resource Groups to encourage diverse voices, • Microsoft Teams communities focused on wellness, art, furbabies, family, parenting, and more. The Impact Flexibility & Balance • Flexible Time Off - Take the time you need to rest, recharge, and live your life., • Company-Wide Wellbeing Days - Paid days off to unplug and focus on your mental health., • Multiple Health Plan Options - Including a 100% employer-paid plan., • Employer HSA Contributions - When enrolled in a High-Deductible Health Plan., • Fitness Reimbursement Program - Stay active, your way., • Paid Parental Leave - For both birthing and non-birthing parents., • Traditional & Roth 401(k) - With a generous company match., • Online Learning Platforms - Fuel your professional development., • Competitive Salary & Bonuses - Your contributions are valued and rewarded. Granicus is committed to providing equal employment opportunities. All qualified applicants and employees will be considered for employment and advancement without regard to race, color, religion, creed, national origin, ancestry, sex, gender, gender identity, gender expression, physical or mental disability, age, genetic information, sexual or affectional orientation, marital status, status with regard to public assistance, familial status, military or veteran status or any other status protected by applicable law.

Position: Critical Systems Technician II, Battery Location: Dallas, TX Job Id: 943 of Openings: 1 TITLE: CRITICAL SYSTEMS TECHNICIAN II, BATTERY LOCATION: Dallas, TX (50% Travel) POSITION SUMMARY: A Critical Systems Technician II, Battery is responsible for startups, certifications, preventative maintenance, and scheduled maintenance for battery systems related to Uninterruptable Power Supply systems. ESSENTIAL DUTIES AND RESPONSIBILITIES: • Assist with the battery replacements and new installations., • Assist, as necessary, with preventative maintenance of batteries with minimal disruption to customer., • Assist in the warehouse when needed., • Interact effectively with internal and external customers., • Follow operational, maintenance and emergency methods of procedure (MOPs), • Ensure strict adherence to critical facility work rule and safety procedures., • Ability to use hand and general maintenance tools and equipment., • Keep job site clean during replacement, installs, and maintenance., • Assist with work in other service divisions (Switch Gear, Operations, HVAC, etc.) as needed., • Work from schematic diagrams, sketches, and verbal instructions., • Learn how todisconnect and connectsealedbatteries in cabinets and open racks., • Learn how to build flooded cell batteryracks, and spill containment systems., • Learn how to install flooded cell batteries onto rack systems in thecustomerscritical space., • Learn how to enter pre-installation test readings into our reporting format thru laptop computer., • Learn how to collect data from PM services and importinto files for reporting purposes., • Gain experience from preventive maintenance, trouble diagnosis, routine and emergency maintenance and repairs with minimum direct supervision to DC batterysystems, • Regular and reliable attendance is an essential job function., • Other duties as assigned by Services Management., • Travel approximately 50% or more, • Must be a US citizen, • Able to obtain security clearance is preferred QUALIFICATIONS:, • High School Diploma, • Clean driving records a must, • Safe operation of department equipment, • Elementary fix/repair techniques based on directed supervision, • Knowledge of or ability to learn basic AC/DC theory, electronic components, and electronic circuitry, • Complete training on:, • Use of Digital multimeter for AC and DC diagnostic measurements, • Use of Amp Clamp and flexible CT in DC and AC measures, • Use of AlberCellcorderfor use as a battery testing and maintenance tool for a multitude of various battery designs and chemistries, • Show understanding of proper use of:, • Isolation devices to control available voltage potentials., • Necessary use of Arc-Flash suit and PPE., • Show competency in the connections of series, parallel, and series-parallel battery strings., • Understand torque values, torque-mark application, and visual inspection of completed battery cabinet installations. Computer Skills:, • Proficient knowledge of Microsoft Office including: Word, Excel. Certificates and Licenses:, • OSHA 10-hour certification, • NFPA-70E Safety Training Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to sit; Standing and walking is required. The noise level in the work environment is usually moderate. The employee must lift and carry up to 50 - 70 pounds. The employee must occasionally lift and move up to 100 pounds. The above job description is not intended to be an all-inclusive list of duties and standards of the position. Incumbents will follow any other instructions, and perform any other related duties, as assigned by their supervisor. Benefits to Joining Our Team CPG offers a competitive and comprehensive package that includes additional benefits beyond enhanced medical, dental, and vision coverage • Health Benefits - (Medical, Dental & Vision Insurance), • Flexible Spending Account Options, • 401K Plan, • Employer paid Life & Disability Insurance, • Paid Time Off, • Employee Referral Program, • Employee Assistance Program (EAP), • CPG is an equal opportunity employer. We will consider all employment applicants without attention to age, race, color, religion, sex, sexual orientation, gender identity, national origin, veteran, or disability status. Learn more about CPG by checking out our website here #LI-TG1 Pay Range: $27.21 - $40.82 per hour Apply for this Position

Border Patrol Agent (BPA) – in the Federal Security and Public Safety Sector Experienced (GL-9 GS-11) SAME MISSION, NEW DRIVE! You love protecting your community and doing your part to keep our nation safe. But maybe you’re looking for a change of scenery? USBP is hiring immediately for full-time, career positions, where your prior law enforcement officer (LEO) experience may qualify you for higher-graded Border Patrol Agent (BPA) opportunities. Continue making a difference with the nation's premier federal agency charged with securing our borders and protecting our country. Whether you gained this experience as part of a military police unit or as a member of a state or local law enforcement organization, you have an opportunity to work with highly trained professionals whose camaraderie, pride, and purpose are hallmarks of their daily mission. Check out the duties and responsibilities section below, along with the qualifications section to see if you are eligible. Now is the time to make your move, along with excellent base pay, location pay, exceptional benefits, and job stability, USBP is offering up to $60,000 in additional incentives to newly appointed Agents (see details below). DON’T FORGET TO CHECK OUT THE INCENTIVES – SEE SALARY SECTION BELOW IMPORTANT NOTICE: Duty assignments available at the time of offer may include the Southwest Border, including prioritized locations. U.S. Border Patrol determines duty assignments at the time of offer based on operational needs, which may or may not align with candidates’ first-choice preferences. Relocation may be required. U.S. Customs and Border Protection (CBP) is hiring immediately for these full-time, career Law Enforcement Officer (LEO) opportunities. Salary and Benefits: Salary for newly appointed law enforcement Border Patrol Agents varies from: Base Salary: GL-9/GS-11, $63,148 - $120,145 per year Locality Pay: Varies by duty location. Overtime Pay: Up to 25% Duty location impacts pay rates; locality pay for federal law enforcement is higher in some locations than others. A fully trained BPA may be eligible for up to an additional 25% of base pay per the BPA Pay Reform Act of 2014. This is a career ladder position with a grade level progression from GL-9 to GS-11 to GS-12. You will be eligible for a promotion to the next higher grade level (without re-applying) once you successfully complete 52 weeks in the lower grade level. All Border Patrol Agents may select from an array of federal employment benefits that include health and insurance plans, a generous annual and sick leave program, and participation in the Thrift Savings Plan, a retirement plan that is similar to traditional and ROTH 401(k) offerings. Newly appointed Border Patrol Agents (as defined in 5 CFR 575.102 ) will be offered up to a $20,000 incentive. The first $10,000 will be paid upon successful completion of the Border Patrol Academy, with the remaining $10,000 awarded for accepting a prioritized location. Prioritized locations include Sierra Blanca, TX; Presidio, TX; Sanderson, TX; Comstock, TX; Lordsburg, NM; Freer, TX; Hebbronville, TX; Ajo, AZ. Newly appointed Border Patrol Agents may also qualify for up to $40,000 in additional incentives distributed over their first four years. Duty Locations: You will be asked to select your preferred location for one of the following mission critical locations: Big Bend Sector Stations - *Presidio, Van Horn, *Sanderson, Alpine, *Sierra Blanca, Marfa Buffalo Sector Stations - Wellesley Island Del Rio Sector Stations - Del Rio, Brackettville, *Comstock, Eagle Pass North, Eagle Pass South, Carrizo Springs, Uvalde El Paso Sector Stations - Alamogordo, Clint, Deming, El Paso, Fort Hancock, Las Cruces, *Lordsburg, Santa Teresa, Ysleta El Centro Sector Stations - El Centro, Indio, Calexico Grand Forks Sector Stations - Pembina Havre Sector Stations - Havre, Malta, Plentywood, Scobey, Sweetgrass Houlton Sector Stations - Calais, Fort Fairfield, Jackman, Rangeley, Van Buren Laredo Sector Stations - Laredo South, Cotulla, *Hebbronville, Laredo West, *Freer, Laredo North, Zapata Rio Grande Valley Sector Stations - Rio Grande City, Fort Brown, McAllen, Brownsville, Falfurrias, Weslaco, Kingsville, Harlingen San Diego Sector Stations - Boulevard, Brownfield, Campo, Chula Vista, Imperial Beach, Murrieta, San Clemente Spokane Sector Stations - Colville, Curlew, Metaline Falls, Oroville Swanton Sector Stations - Beecher Falls, Burke, Champlain, Newport, Richford Tucson Sector Stations - *Ajo, Tucson, Nogales, Douglas, Brian A Terry, Sonoita, Casa Grande, Three Points Substation, Willcox Yuma Sector Stations - Blythe, Yuma, Wellton Duties and Responsibilities: As a BPA, you will be part of our 60,000+ workforce that strives to protect the American people by safeguarding our borders, deterring illicit activity, and enhancing the nation’s economic prosperity. Being a BPA makes you a valuable member of the Federal Law Enforcement Officer (LEO) profession. Typical assignments include: Detecting and questioning people suspected of violating immigration and customs laws and inspecting documents and possessions to determine citizenship or violations. Preventing and apprehending aliens and smugglers of aliens at or near the borders by maintaining surveillance from covert positions to include using infrared scopes during night operations. Interpreting and following tracks, marks, and other physical evidence of illegal entry of persons or contraband. Performing farm checks, building checks, traffic checks, city patrols, and transportation checks. Patrolling the international boundary and coastal waterways using a variety of government assets such as vehicles, horses, vessels, watercraft, off-road vehicles, ATVs, snowmobiles, and motorcycles for the accomplishment of the USBP Mission. Qualifications: GL-9: You qualify for the GL-9 grade level if you possess one (1) year of specialized experience, equivalent to at least the next lower grade level, performing duties such as: Performing physical searches of detained individuals, their vehicles, and their immediate surroundings for weapons, contraband, currency, and other evidence. Apprehending, physically restraining, or working with law enforcement officials to identify or apprehend violators of state, federal, or immigration laws. Proficient in the use of firearms, preparing investigative reports, serving court orders (e.g., warrants, subpoenas, etc.), and gathering evidence for criminal cases prosecuted through the court system. If you have previous or current law enforcement or military law enforcement experience, you may qualify at the GS-11 grade level. GS-11: You qualify for the GS-11 grade level if you possess one year of specialized experience equivalent to at least the next lower grade level, with the authority granted by the state or government to enforce laws, make arrests, and investigate crimes, performing primary duties in an official law enforcement capacity such as: Utilizing intelligence information to track illegal operations, criminal activity, threats to our nation, and/or contraband while serving as a state, federal, or military law enforcement official. Leading investigations of fraud, contraband, criminal activity, threats to our nation, and/or illegal operations to determine sources and patterns while serving as a state, federal, or military law enforcement official. Apprehending violators of state, federal, or immigration laws by utilizing various forms of complex technology that include surveillance, detection, situation awareness systems, and/or communications equipment. The above experience will be applied in connection with the following: Make arrests and exercise sound judgment in the use of firearms; deal effectively with people in a courteous manner in connection with law enforcement matters; analyze information rapidly and make prompt decisions; or develop and maintain contact with a network of informants. There are no education substitutions for the GL-9 or GS-11 grade-level Border Patrol Agent opportunities. Other Requirements: Citizenship: You must be a U.S. Citizen to apply for this position. Residency: You must have had primary U.S. residency (including protectorates as declared under international law) for at least three of the last five years. Age Restriction: In accordance with Public Law 100-238, this position is covered under law enforcement retirement provisions. Candidates must be referred for selection to the Border Patrol Agent position before reaching their 40th birthday in accordance with Department of Homeland Security Directive 251-03. The age restriction may not apply if you are currently serving or have previously served in a federal civilian law enforcement (non-military) position covered by Title 5 U.S.C. 8336(c) or Title 5 U.S.C. 8412(d). Veterans’ Preference: You may also be eligible for an excepted service Veterans’ Recruitment Appointment (VRA). The age restriction does not apply if you are Veterans' Preference eligible. Formal Training: After you are hired, you will be detailed to the U.S. Border Patrol Academy in Artesia, New Mexico, for approximately six (6) months of intensive instruction in immigration and nationality laws, law enforcement, and USBP-specific operations, driver training, physical techniques, firearms, and other courses. Border Patrol work requires the ability to speak and read Spanish, as well as English. Border Patrol Agents will be provided training to become proficient in the Spanish language at the Academy. How to Apply: Click the Apply button on this site. You will be linked to the CBP Talent Network registration page. For Position of Interest, select Border Patrol Agent, and then complete the pre-screening questions. You’ll then receive a link(s) to the BPA Job Opening Announcements (JOAs) on USAJOBS, the federal government’s official employment site, to complete your application. Be certain to review ALL details of the job opportunity announcement and follow all instructions in the application process, including items (resume, transcripts, etc.) to submit. You will be evaluated based on your resume, supporting documents, and the BPA Entrance Exam. If you have questions about the application process, contact a recruiter through the U.S. Border Patrol page: careers.cbp.gov/s/usbp. NOTE: As a subscriber to the CBP Talent Network, you’ll receive monthly emails with information about webinars, career expos, and future opportunities with CBP.

Job ID: 723656BR Date posted: Apr. 08, 2026 Description: You will be the FPGA Lead - Programmable Logic Designer for Program Strix Indigo. Our team is modernizing a scene generation system to evaluate RF and advanced sensor capabilities, delivering incremental upgrades that expand test fidelity and mission relevance. What You Will Be Doing As the FPGA Lead you will own the end to end development of a sophisticated FPGA based architecture that powers the upgraded scene generation platform. You'll work hand in hand with software, hardware, and systems engineers to translate system needs into a clean, scalable FPGA solution. Your responsibilities will include: • Defining, designing, verifying, and implementing the FPGA architecture using VHDL and/or Verilog., • Conducting trade studies to select the optimal FPGA device, balancing logic utilization, power consumption, and thermal performance., • Creating detailed FPGA requirements and interface control documents that guide cross functional development., • Leveraging AMD Vivado and Altera Quartus toolchains for synthesis, place and route, and timing closure., • Applying Universal Verification Methodology (UVM) or equivalent frameworks to build robust testbenches and achieve high coverage verification., • Providing technical leadership, mentorship, and code review guidance to junior engineers and interns., • Driving the Design Architecture Development process, ensuring milestones are met and risks are mitigated., • Collaborating with stakeholders to integrate FPGA outputs with the larger scene generation system, validating performance against RF and sensor test objectives. Why Join Us Do you want to be part of a company culture that empowers employees to think big, lead with a growth mindset, and make the impossible a reality? We provide the resources and give you the flexibility to enable inspiration and focus. If you have the passion and courage to dream big, work hard, and have fun doing what you love then we want to build a better tomorrow with you. We offer flexible work schedules to comprehensive benefits investing in your future and security, Learn more about Lockheed Martin's comprehensive benefits package here. Further Information About This Opportunity: This position is in Dallas. Discover more about our Dallas, Texas location. MUST BE A U.S. CITIZEN - This position is located at a facility that requires special access. The selected candidate must be able to obtain a secret clearance. Basic Qualifications: -Bachelor's or Master's degree in Electrical Engineering, Computer Engineering, or related field -Experience with the MFC DAR process -Proficiency in VHDL or Verilog programming languages -Experience with Xilinx and Altera FPGAs and the Vivado/Quartus design tool -Experience with FPGA simulation tools and languages such as Synopsys VCS and SystemVerilog -Strong understanding of digital design principles, including timing analysis, clock domain crossing, and signal integrity -Experience with version control systems, such as Git -Excellent communication, teamwork, and leadership skills Desired Skills: -Experience with other FPGA vendors, such as Altera or Microchip -Knowledge of software programming languages, such as C, C++, or Python -Experience with debugging and troubleshooting complex digital systems -Knowledge of UVM and experience with UVM-based verification methodologies -Strong analytical and problem-solving skills, with the ability to analyze complex technical issues and develop creative solutions Security Clearance Statement: This position requires a government security clearance, you must be a US Citizen for consideration. Clearance Level: Secret Other Important Information You Should Know Expression of Interest: By applying to this job, you are expressing interest in this position and could be considered for other career opportunities where similar skills and requirements have been identified as a match. Should this match be identified you may be contacted for this and future openings. Ability to Work Remotely: Part-time Remote Telework: The employee selected for this position will work part of their work schedule remotely and part of their work schedule at a designated Lockheed Martin facility. The specific weekly schedule will be discussed during the hiring process. Work Schedules: Lockheed Martin supports a variety of alternate work schedules that provide additional flexibility to our employees. Schedules range from standard 40 hours over a five day work week while others may be condensed. These condensed schedules provide employees with additional time away from the office and are in addition to our Paid Time off benefits. Schedule for this Position: 4x10 hour day, 3 days off per week Lockheed Martin is an equal opportunity employer. Qualified candidates will be considered without regard to legally protected characteristics. The application window will close in 90 days; applicants are encouraged to apply within 5 - 30 days of the requisition posting date in order to receive optimal consideration. At Lockheed Martin, we use our passion for purposeful innovation to help keep people safe and solve the world's most complex challenges. Our people are some of the greatest minds in the industry and truly make Lockheed Martin a great place to work. With our employees as our priority, we provide diverse career opportunities designed to propel, develop, and boost agility. Our flexible schedules, competitive pay, and comprehensive benefits enable our employees to live a healthy, fulfilling life at and outside of work. We place an emphasis on empowering our employees by fostering an inclusive environment built upon integrity and corporate responsibility. If this sounds like a culture you connect with, you're invited to apply for this role. Or, if you are unsure whether your experience aligns with the requirements of this position, we encourage you to search on Lockheed Martin Jobs, and apply for roles that align with your qualifications. Experience Level: Experienced Professional Business Unit: MISSILES AND FIRE CONTROL Relocation Available: Possible Career Area: Electrical Engineering Type: Full-Time Shift: First

Job Description Physician led – Outcome based. Join Serenity. Serenity Healthcare was started by a psychiatrist that believes mental health care should be more than just handing out prescriptions. Our goal is to provide evidence-based care that utilizes medication management, TMS and ketamine therapy in a supportive, patient focused environment. The Role: Psychiatric Nurse Practitioner (PMHNP) | Dallas - Fort Worth, TX At Serenity Healthcare, we provide a broad variety of treatment options, amazing clinical support teams, access to a national provider network and a great work/life balance so that our providers can provide their patients with exceptional care. If you are ready to enhance your career while changing patients’ lives within a supportive and innovative environment, we encourage you to get in touch. Why You’ll Love Working at Serenity: · Earn $150,000 per year with the potential to earn over $300,000 · Medical, Dental & Vision, 90% coverage for you and your family · 401k Retirement Plan · 20 PTO days & 10 Major Holidays Off · Outpatient Clinic with no On-Call responsibilities · 8:1 Staff to Provider Ratio to reduce administrative work · 3 13-hour scheduled shifts weekly What You’ll Do: · Assess, diagnose, and create care plans tailored to each patient · Provide advanced personalized therapies, including TMS and Ketamine Infusions · Manage medications, monitor effects, and adjust as needed · Collaborate with team to deliver seamless care · Educate patients and families to support mental wellness What You Need: · Board certified PMHNP · Licensed, or willing to become licensed, in corresponding state of clinic location · Unencumbered DEA / Clean criminal background · Must be a United States Citizen or hold a Green Card Who We Are: Using advanced medical therapies recently released to market, Serenity Healthcare gives our patients long-term success even when other treatments have failed. With evidence-based research and proven results to support us, we help patients take back their lives with a revolutionary technological approach to healthcare. Serenity Healthcare is an equal opportunity employer – if you’re qualified, you’re welcome here. This position is contingent on successfully completing a criminal background check and drug screen upon hire.

Job Description Psychiatric Nurse Practitioner (PMHNP) | Full Time Serenity Healthcare was founded by a psychiatrist with a simple belief: mental health care should go beyond routine medication management. We deliver evidence-based, outcomes-driven psychiatry by combining medication management with advanced treatments like TMS and ketamine therapy, all within a highly supported outpatient model. Our structure is intentionally designed so providers can focus on what matters most—excellent patient care, not administrative burden. Why PMHNPs Choose Serenity · $150,000 base salary + incentives Realistic total compensation up to $300,000+ · No call. Ever. Outpatient-only practice · 8:1 staff-to-provider ratio — exceptional clinical and administrative support · Flexible schedule (3 13-hour shifts weekly) · Comprehensive benefits: Medical, Dental & Vision (90% coverage for you and your family) · 20 PTO days + 10 paid holidays · Collaborative, physician-led culture with a close-knit provider team · Access to a national network of Serenity providers and clinical leadership · Annual provider retreats to exotic locations like Maui and the Bahamas The Role As a psychiatric nurse practitioner at Serenity, you’ll practice at the top of your license in a supportive, innovative environment: · Conduct comprehensive psychiatric evaluations · Develop individualized, evidence-based treatment plans · Prescribe and manage psychotropic medications · Provide Deep TMS and ketamine therapy onsite with a highly trained support team · Deliver compassionate, patient-centered care · Optional involvement in clinical research and innovation initiatives No prior TMS or ketamine experience required — training and support provided. Qualifications · Board Certified or Board Eligible as a PMHNP · Active state license or willingness to obtain · Unencumbered DEA license · Clean background · U.S. Citizen or Green Card holder · Strong clinical judgment, communication skills, and patient-centered approach · Ability to work both independently and collaboratively within a team About Serenity Healthcare Serenity Healthcare utilizes advanced, evidence-based treatments to help patients achieve meaningful, long-term improvement—especially those who have not responded to traditional approaches. By combining technology, research, and exceptional clinical support, we are redefining what outpatient psychiatry can be. Serenity Healthcare is an equal opportunity employer. Employment is contingent upon successful completion of a background check and drug screen.

Position: Controls & Integration Engineer III, Electrical Location: Dallas, TX Job Id: 929 of Openings: 1 TITLE: Controls & Integration Engineer III, Electrical LOCATION: Dallas, TX POSITION SUMMARY: Controls Engineers are responsible for designing, developing, installing, and maintaining equipment used to monitor and control systems, equipment and processes. They work in various industries including building management systems, power system automation and protection systems. Controls engineers are technical experts in areas such as advanced process control, instrumentation, distributed control systems, PLCs, and SCADA systems. Controls engineers use these skills to design and implement solutions to our customers' complex needs. Specific areas of expertise for this position include power chain monitoring and control systems in Data Centers and /or mission critical environments. Experience in Electrical Power Monitoring Systems (EPMS) and field device configuration such as gateways, PLC, Meters, Relays, and SCADA/HMI software. Experience in Building Automation Systems (BAS) and configuration/programming of field controllers is beneficial. ESSENTIAL DUTIES AND RESPONSIBILITIES: To perform this job successfully, an individual must be able to perform the following satisfactorily; other duties may be assigned. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Technical Responsibilities • Design / Engineering, • Generate design documents for SCADA/Automation projects, • Develop design document narratives, • Perform requirements analysis, • Generate Sequence of Operations (SOO) / System Functional Documentation, • Create Subsystem Designs (CAD / Panels / Layouts / Wiring / SCADA Screens / Hardware / Communications), • Comment Resolution, • Reviews and comments on 3rd party design documents for SCADA/Automation projects in support of large programs/projects, • Review design document narratives, • Perform execution and design scope gap analysis, • Review Sequence of Operations / System Functional Documentation to ensure compliance with project requirements, • Review Subsystem Designs (CAD / Panels / Layouts / Wiring / SCADA Screens / Hardware / Communications) for project compliance, • Assist in reviewing project specifications, • Assist in creation of testing plans and procedures for Integrated Systems Factory Testing, • Programming, • Program / configure / troubleshoot Controllers, PLCs, RTUs, and/or HMI systems, • Testing / Troubleshooting / Deployment / Commissioning, • Assist senior engineers in creating and updating testing and commissioning procedures, • Preparation of test reports, • Originates test procedures, • Commissioning of deployed systems, • Development of test equipment and simulation devices, • Perform Factory and Field Testing, • Maintenance, • Perform troubleshooting on service calls to existing and legacy system operators, • Perform hardware / software upgrades and replacements on existing systems Managerial Responsibilities, • Estimates, • Assists senior engineers in preparation of cost estimates and supporting documentation, • Work with relevant stakeholders to review scope of project, • Conduct any surveys, inspections, tours, etc. of client sites, as required, • Assists senior engineers in evaluation and pricing of change orders from vendors, • Personnel Management, • Assigns tasks and coordinates with Technical Staff, • Provides technical direction and on-the-job training to drafters, engineering technicians, and less experienced engineers. QUALIFICATIONS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Education/Experience:, • Bachelor's degree in electrical engineering and 5-7 years field experience, • Associate degree in the electrical field and 10 years field experience, • High school diploma and 15 years field experience, • 5 years' experience with designing and servicing controls systems for switchgear, substations, metering and SCADA/Fault Data/SER/Integration-Automation equipment installation and testing, • Experience in reading electrical and control schematics, • Experience in electrical power monitoring systems (EPMS) startup, configuration, and calibration, • Experience in testing and troubleshooting control and protection systems, • Experience using basic electrical and hand tools, • Experience using testing, calibration, or industry-specific tools and software, • Experience testing, reading/verifying all voltage and current inputs to relays; verifying all metering (local and SCADA); calibrating all relays; trip testing (local and SCADA); verifying all alarms (local and SCADA); verifying all alarms (local and SCADA); verifying all function switches, etc., • Experience with 3 phase power systems; power system protection & control schemes; test equipment; test equipment software, • MUST BE A US CITIZEN Computer/Networking Skills:, • Experience in OT and IT networking technologies and topologies, • Experience troubleshooting and diagnosing OT and IT networks and protocols, • Experience in CAD/CAE Software (Visio, AutoCAD), • Experience in schedule management software (Project, Primavera P6), • Standard Office Software (Microsoft Word, Excel, Access etc.) Certificates and Licenses:, • Required Certifications, • Certification in one or more PLC / Automation Platform, such as: Niagara N4, Schneider Power Monitoring, Rockwell, Siemens, JCI, Eaton Foreseer, etc., • Certification in one or more SCADA platforms, such as: Iconics, Ignition, Aveva, etc., • Preferred Licenses / Certifications, • Design Build Institute of America (DBIA), • Certified SCADA Security Architect (CSSA), • Certified Automation Professional (CAP) Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions., • While performing the duties of this job, the employee is regularly exposed to computer screens for an extended period of time; Sitting for extended periods of time; Reach by extending hands or arms in any direction; Have finger dexterity in order to manipulate objects with fingers rather than whole hands or arms, for example, using a keyboard; Listen to and understand information and ideas presented through spoken words and sentences; Communicate information and ideas in speaking so others will understand; Read and understand information and ideas presented in writing; Apply general rules to specific problems to produce answers that make sense; Identify and understand the speech of another person. The above job description is not intended to be an all-inclusive list of duties and standards of the position. Incumbents will follow any other instructions, and perform any other related duties, as assigned by their supervisor. CPG is an equal opportunity employer. We will consider all employment applicants without attention to age, race, color, religion, sex, sexual orientation, gender identity, national origin, veteran, or disability status. *We Utilize E-verify #LI-TG1 Pay Range: $98,891 - $148,392 per year Apply for this Position

Pilot—CBP Air Interdiction Agent NEW RECRUITMENT AND RETENTION INCENTIVES! Air and Marine Operations (AMO), a component of U.S. Customs and Border Protection (CBP), offers skilled Pilots interested in law enforcement an opportunity to work with an elite team of highly trained professionals whose camaraderie, pride, and purpose are hallmarks of their daily mission to protect America. If you are looking for an exciting and rewarding career with excellent pay, exceptional federal benefits and job stability, now is the time to make your move: become an Air Interdiction Agent. AMO is actively recruiting for these full-time security-based opportunities with a streamlined application process. Notably, seasoned pilots and those with military training are in demand–APPLY TODAY! DON’T FORGET TO CHECK OUT THE INCENTIVES – SEE SALARY SECTION BELOW!Duty Locations Locations are offered based on operational requirements, mission requirements, and critical agency hiring needs as determined by AMO. You must be willing to work at any duty location within the region you select to include but not limited to the following: Southeast Region: Homestead, FL and CAMB: Aguadilla, PR Southwest Region: Tucson and Yuma, AZ; San Diego, CA; El Paso, Laredo, and McAllen, TX NASOC UAS locations: Sierra Vista, AZ; San Angelo, TX Duties and Responsibilities As an Air Interdiction Agent (AIA) you will perform aviation-based law enforcement operations for the detection, prevention, interdiction, and apprehension of terrorists, terrorist weapons, and other contraband and persons from illegally entering or attacking the United States. Typical duties include: • Conducting air patrol, surveillance, and pursuit activities related to the interdiction of smuggled contraband via land vehicles, aircraft, or vessels., • Monitoring behavior patterns and activities of suspect persons, vehicles, or vessels believed to be engaged in illegal activities., • Collecting, refining, and analyzing strategic and tactical intelligence., • Supporting search and rescue and humanitarian efforts. Salary and Benefits Begin your career as an Air Interdiction Agent (AIA) and make up to $85,270 to - $110,846 per year based on your qualifications for the GS-11 grade level and possible extra compensation based on your duty location (see below). Recruitment Incentive: New hires may be eligible to receive a one-time Recruitment Incentive payout of $10,000 after completing Federal Law Enforcement Training Academy (FLETC) (1 year service agreement will need to be completed) (Recruitment Incentive is only available to new Federal employees as described in 5 CFR 575.102. Eligibility will be determined by Human Resources.) Your starting salary will include Special Salary Rate (SSR); Law Enforcement Availability Pay (LEAP); Recruitment Incentive; and Retention Incentive. This career ladder position has a grade level progression of GS-11, GS-12, and GS-13. You may be eligible for a promotion to the next higher grade level automatically (without re-applying) once you complete 52 weeks at each grade level (with supervisor approval). Example of annual compensation for the first three years at our new-hire locations which are currently authorized to receive LEAP (amounts below include the SSR + LEAP). · GS-11, 1st year annual pay - $106,588 · GS-12, 2nd year annual pay - $127,754 · GS-13, 3rd year annual pay - $151,918 Example of annual compensation for the first three years at our new-hire locations which are currently authorized to receive a 10% Retention Incentive (amounts below include the SSR + LEAP + 10% Retention Incentive UAS Sites: Sierra Vista, AZ; Grand Forks, ND; San Angelo, TX). · GS-11, 1st year annual pay - $115,115 · GS-12, 2nd year annual pay - $137,974 · GS-13, 3rd year annual pay - $164,071 Example of annual compensation for the first three years at our new-hire locations which are currently authorized to receive a 25% Recruitment Incentive (amounts below include the SSR + LEAP + 25% Recruitment Incentive CAMB location only; Aguadilla, PR). · GS-11, 1st year annual pay - $127,906 · GS-12, 2nd year annual pay - $153,305 · GS-13, 3rd year annual pay - $182,302 Retention Incentive: Retention Incentive is contingent on eligibility. Eligibility will be determined by Human Resources. • RI: Retention Incentive (25% for UAS Sites, Sierra Vista, AZ, Grand Forks, ND, San Angelo, TX) Air Interdiction Agents are eligible to select from an array of federal employment benefits that include health, dental and other insurance plans, a generous annual and sick leave program, and participation in the Thrift Savings Plan, a retirement plan akin to a traditional and ROTH 401(k) offering. Qualifications Experience: You qualify for the GS-11 grade level if you possess one (1) year of specialized professional aviation experience performing duties such as: • Flying as a Pilot-in-Command or sole manipulator in an airplane and helicopter in all environments of flight, including night, poor weather, unfavorable terrain, low altitudes, or speed., • Evaluating information rapidly and making judicious decisions promptly during in-flight operations., • Developing strategies and coordinating aircraft and ground assets., • Using information systems and databases to conduct information surveys, queries, update files and disseminate information. Certification & Ratings: A current FAA Commercial or ATP Pilot Certification with one of the following ratings: • Dual Rated: Airplane (Single-engine land or multi-engine land) with instrument rating AND Rotorcraft Helicopter with instrument rating., • Airplane Rated: Airplane (Single-engine land or multi-engine land) with instrument., • Helicopter Rated: Rotorcraft Helicopter with instrument rating. 250 Pilot-in-Command hours; 75 Instrument hours; 75 Night hours (Flight Hour Waiver available, see Required Documents); and 100 Flight hours in the last 12 months This qualification requirement is currently being waived by OPM through August 5, 2025. FAA Class 2 medical required for assessment dated within the last 12 calendar months; FAA Class 1, FAA Class 2 or Military medical flight clearance dated within the last 12 months qualifies to start the pre-employment process for the AIA position. Apply at 750 hours total time: Applicants applying at 750 flight hours are required to obtain at least 1,000 flight hours (depending on the number of hours approved for a waiver) at their own expense before being able to attend the 3-part flight assessment. Applicants must still meet 250 Pilot-in-Command, 75 instrument, and 75-night hours (100 flight hours in the last 12 months. This qualification requirement is currently being waived by OPM through August 4, 2026) UAS Flight Hours: Applicants may include UAS Predator A (MQ-1), Predator B (MQ-9) flight hours and Predator A (MQ-1), Predator B (MQ-9) or predator-based flight hours. These hours may be credited towards satisfying the "Total flight time" 1,500 flight hour requirement only. UAS hours do not count towards the 250 flight hours as a Pilot in Command, 75 flight hours Instrument, and 75 flight hours Night. Flight hour logbooks will be required at the time of your Flight Assessment for verification. Other Requirements Citizenship: You must be a U.S. Citizen to apply for this position. Residency: You must have had primary U.S. residency (includes protectorates as declared under international law) for at least three of the last five years. Age Requirement: Provisions of Public Laws 93-350 and 100-238 allow the imposition of a maximum age for initial appointment to a primary Law Enforcement Officer position within the Department of Homeland Security (DHS). In accordance with DHS Management Directive 251-03, the "day before an individual's 37th birthday" is the maximum age for original appointment to a position as a primary law enforcement officer within DHS. The age requirement is also necessary to ensure that you are able to complete the 20 years of applicable service for retirement. NOTE: The Commissioner of CBP has approved a temporary increase in the maximum allowable age to 40 for original placement into an Air Interdiction Agent position. Age Waiver: Creditable law enforcement officer service - Covered by Title 5 U.S.C. 8336(c) or Title 5 U.S.C. 8412(d), or creditable service covered by Title 5 U.S.C. 8401(36) (as a Customs and Border Protection Officer) on or after July 6, 2008, may be applied toward the maximum age requirement. This age restriction may not apply if you are currently serving in a federal civilian (not military) law enforcement position covered by Title 5 U.S.C. 8336(c) or Title 5 U.S.C. 8412(d). Veterans' Preference Eligibility: To ensure compliance with statutes pertaining to the appointment of preference eligible veterans as determined by the Merit Systems Protection Board in its decision Isabella v. Dept of State, the maximum age for original appointment articulated above shall not apply to the hiring of individuals entitled to veterans' preference eligibility under 5 U.S.C. 3312. You must submit proof of Veteran's Preference (DD-214 Member 4 Copy) at the time of application. Training: This position has a training requirement. You may be required to successfully complete the training requirement as a condition of employment. Failure to successfully complete the required course(s) of training in accordance with CBP standards and policies will result in placement into either a former or different position, demotion, or separation as determined by management and appropriate procedures. Travel Required: You may be expected to travel for this position based on operational needs.

Company Description Smiths Interconnect, is a global leader in the design and manufacture of high-performance interconnect solutions. Our products are used in mission-critical applications across industries such as aerospace, defense, telecommunications, and industrial markets. At Smiths Interconnect, we are committed to innovation, quality, and providing cutting-edge solutions that connect the world's most demanding systems. Smiths Interconnect is part of Smiths Group. For over 170 years, Smiths has been pioneering progress by engineering for a better future. We serve millions of people every year, to help create a safer, more efficient and productive, and better-connected world across four global markets: energy, security & defense, space & aerospace and general industrial. Listed on the London Stock Exchange, Smiths employs c.16,000 colleagues in over 50 countries. Job Description Responsibilities: • Setup and operation of Fanuc & HAAS CNC milling centers using Master CAM software. • Utilize blueprints, sketches, drawings, specifications, or sample parts to determine dimensions and tolerances of finished work piece, sequence of operations, and setup requirements., • Work to close tolerances using required gauges and inspection knowledge., • Document information pertaining to setup and operation of each job utilizing written descriptions, sketches and/or photos., • Train junior operators/apprentices., • Perform other tasks as assigned. Qualifications Technical Knowledge, Skills and Abilities: • 3-7 years of manual machining and CNC setup and operation utilizing conversational programming., • Proficiency in Master CAM software preferred, • Must have a high work ethic, be a team player and work with a since of urgency., • Ability to read and comprehend complex machine and component drawings., • Ability speak/read English and understand verbal instructions., • Ability to analyze and solve problems., • Detailed oriented, self-motivated, ability to work well with limited supervision., • Ability to train others., • Ability to work overtime and on weekends as needed for the position. Travel %: 0-10% Security: Please State if US Citizen or permanent Resident Required Additional Information All your information will be kept confidential according to EEO guidelines. We believe that different perspectives and backgrounds are what make a company flourish. All qualified applicants will receive equal consideration for employment regardless of color, religion, sex, sexual orientation, gender identity, national origin, economic status, disability, age, or any other legally protected characteristics. We are proud to be an inclusive company with values grounded in equality and ethics, where we celebrate, support, and embrace diversity. At no time during the hiring process will Smiths Group, nor any of our recruitment partners ever request payment to enable participation - including, but not limited to, interviews or testing. Avoid fraudulent requests by applying jobs directly through our career's website (Careers - Smiths Group plc)

Company Description Smiths Interconnect, is a global leader in the design and manufacture of high-performance interconnect solutions. Our products are used in mission-critical applications across industries such as aerospace, defense, telecommunications, and industrial markets. At Smiths Interconnect, we are committed to innovation, quality, and providing cutting-edge solutions that connect the world's most demanding systems. Smiths Interconnect is part of Smiths Group. For over 170 years, Smiths has been pioneering progress by engineering for a better future. We serve millions of people every year, to help create a safer, more efficient and productive, and better-connected world across four global markets: energy, security & defense, space & aerospace and general industrial. Listed on the London Stock Exchange, Smiths employs c.16,000 colleagues in over 50 countries. Job Description Are you ready to bring precision and creativity to life? As a CNC Programmer II on our 1st Shift team, you'll master the art of turning digital designs into perfectly crafted parts. If you love working with cutting-edge Fanuc & HAAS CNC milling centers and have a passion for precision, this is your stage to shine! Key Responsibilities: \n • Master the setup, programming, and operation of Fanuc & HAAS CNC milling centers using Master CAM software-turning code into reality!\n, • Decode blueprints, sketches, drawings, and specifications like a pro to determine dimensions, tolerances, and the perfect sequence of operations.\n, • Work your magic with close tolerances using precision gauges and inspection tools to ensure every finished product is absolutely flawless.\n, • Document your setup and operation expertise through written descriptions, sketches, and solid models-become the go-to resource for your team.\n, • Mentor and train junior operators and apprentices, passing on your machining wisdom and helping them level up their skills.\n, • Champion safety procedures and regulations-keeping our team safe is everyone's superpower.\n, • Take on additional challenges as they come your way, staying flexible and ready for whatever's next.\n\n Qualifications Technical Knowledge, Skills and Abilities: \n • 3-7 years of hands-on manual machining and CNC setup and operation experience with conversational programming-you've got the chops!\n, • Master CAM software proficiency is our jam (preferred, but we love learning together!)\n, • High work ethic and team player mentality with a sense of urgency-because great things happen when we move fast and collaborate.\n, • Blueprint reading superpower-you can decode complex machine and component drawings like it's second nature.\n, • English fluency (speaking, reading, and understanding verbal instructions)-clear communication keeps us all on the same page.\n, • Problem-solving ninja skills-you analyze challenges and find creative solutions.\n, • Detail-oriented and self-motivated-you thrive with autonomy and minimal supervision, taking ownership of your work.\n, • Mentoring mindset-you genuinely enjoy training and developing others.\n Security: Please state if US Citizen or Permanent Resident status is required. Additional Information All your information will be kept confidential according to EEO guidelines. We believe that different perspectives and backgrounds are what make a company flourish. All qualified applicants will receive equal consideration for employment regardless of color, religion, sex, sexual orientation, gender identity, national origin, economic status, disability, age, or any other legally protected characteristics. We are proud to be an inclusive company with values grounded in equality and ethics, where we celebrate, support, and embrace diversity. At no time during the hiring process will Smiths Group, nor any of our recruitment partners ever request payment to enable participation - including, but not limited to, interviews or testing. Avoid fraudulent requests by applying jobs directly through our career's website (Careers - Smiths Group plc)

Job ID: 720812BR Date posted: Mar. 19, 2026 Description: You will be the Industrial Electrician for the Electrical Services Team. Our team is responsible for constructing, installing, testing, calibrating, troubleshooting, repairing, and maintaining complex production machinery and associated electrical/electronic equipment. What You Will Be Doing As the Industrial Electrician you will be responsible for a wide range of electrical tasks that keep our manufacturing operations running at peak performance. Your responsibilities will include: \n • Construct, install, test, calibrate, troubleshoot, repair, and maintain complex production machinery and related electrical/electronic systems.\n, • Build and maintain control panels, including installation of instrument meters and temperature controllers.\n, • Perform diagnostics using schematics, drawings, and service manuals for machinery, robotics, and solar equipment.\n, • Disassemble, repair, and reassemble motors, generators, and rectifiers; calibrate instruments with specialized testing equipment.\n, • Train and assist Electrical Technicians II B and III, while keeping the work area clean and orderly.\n\n Why Join Us Do you want to be part of a company culture that encourages employees to build their career, apply their knowledge while using cutting‑edge technology, and achieve challenging goals? We provide the foundation and resources to help you stay motivated, inspired, and productive. If you are driven, dedicated, and enjoy doing what you love, then we want you to join our journey and build a better tomorrow with you. We are committed to supporting your work‑life balance and overall well‑being, offering flexible scheduling options. Learn more about Lockheed Martin's comprehensive benefits package here. Further Information About This Opportunity This position is in Dallas. Discover more about our Dallas, Texas location. MUST BE A U.S. CITIZEN - This position is located at a facility that requires special access. Basic Qualifications: • High school degree or equivalent., • At least 5 years' experience in the electrical industry., • Previous experience with electrical and associated electronic equipment, instruments, machinery, motors and transformers., • Knowledge of the National Electric Code as it pertains to the facility and machineries within the plant, • Must be able to work on 1st or 2nd shifts as defined by the Collective Bargaining Agreement, • At least 4 years of trades training., • Ingenuity to plan, construct, install, test, modify, repair and maintain a wide variety of electrical and associated electronic equipment when only limited information or general methods are available., • Show initiative to act prudently and decisively during emergencies to avoid damage to equipment and/or facility and prevent production delays. With our employees as our priority, we provide diverse career opportunities designed to propel, develop, and boost agility. Our flexible schedules, competitive pay, and comprehensive benefits enable our employees to live a healthy, fulfilling life at and outside of work. We place an emphasis on empowering our employees by fostering an inclusive environment built upon integrity and corporate responsibility. If this sounds like a culture you connect with, you're invited to apply for this role. Or, if you are unsure whether your experience aligns with the requirements of this position, we encourage you to search on Lockheed Martin Jobs, and apply for roles that align with your qualifications. Experience Level: Hourly/Non-Exempt Business Unit: MISSILES AND FIRE CONTROL Relocation Available: No Career Area: Facilities Type: Full-Time Shift: First

Job ID: 713889BR Date posted: Mar. 18, 2026 Description: You will be the General Maintenance Mechanic for the Maintenance Team. Our team is responsible for ensuring operational readiness of plant facilities and supporting production equipment. What You Will Be Doing As the General Maintenance Mechanic you will be responsible for a broad spectrum of construction, maintenance, repair, and fabrication tasks that keep our facilities running smoothly. Your responsibilities will include, but are not limited to: \n • Perform preventative maintenance on rooftop units, air handlers, hoists, paint booths, and other critical equipment.\n, • Construct and repair structures such as storage sheds, metal frames, security fencing, and equipment foundations.\n, • Fabricate and install steel, sheet‑metal, shelving, racks, benches, and air‑duct systems.\n, • Operate heavy machinery, rig loads, and move large equipment safely.\n, • Maintain clean work areas, report issues, and support the lead supervisor.\n\n Why Join Us Do you want to be part of a company culture that encourages employees to build their career, apply their knowledge while using cutting‑edge technology, and achieve challenging goals? We provide the foundation and resources to help you stay motivated, inspired, and productive. If you are driven, dedicated, and enjoy doing what you love, then we want you to join our journey and build a better tomorrow with you. We are committed to supporting your work‑life balance and overall well‑being, offering flexible scheduling options. Learn more about Lockheed Martin's comprehensive benefits package here. Further Information About This Opportunity This position is in Dallas. Discover more about our Dallas, Texas location. MUST BE A U.S. CITIZEN - This position is located at a facility that requires special access. Basic Qualifications: • High school degree or equivalent, • At least 3-5 years of related experience, • Must be able to work on 1st or 2nd shifts as defined by the Collective Bargaining Agreement, • Experience operating forklift With our employees as our priority, we provide diverse career opportunities designed to propel, develop, and boost agility. Our flexible schedules, competitive pay, and comprehensive benefits enable our employees to live a healthy, fulfilling life at and outside of work. We place an emphasis on empowering our employees by fostering an inclusive environment built upon integrity and corporate responsibility. If this sounds like a culture you connect with, you're invited to apply for this role. Or, if you are unsure whether your experience aligns with the requirements of this position, we encourage you to search on Lockheed Martin Jobs, and apply for roles that align with your qualifications. Experience Level: Hourly/Non-Exempt Business Unit: MISSILES AND FIRE CONTROL Relocation Available: No Career Area: Facilities Type: Full-Time Shift: First

Job ID: 713902BR Date posted: Mar. 19, 2026 Description: You will be the Industrial Electrician for the Electrical Services Team. Our team is responsible for constructing, installing, testing, calibrating, troubleshooting, repairing, and maintaining complex production machinery and associated electrical/electronic equipment. What You Will Be Doing As the Industrial Electrician you will be responsible for a wide range of electrical tasks that keep our manufacturing operations running at peak performance. Your responsibilities will include: \n • Construct, install, test, calibrate, troubleshoot, repair, and maintain complex production machinery and related electrical/electronic systems.\n, • Build and maintain control panels, including installation of instrument meters and temperature controllers.\n, • Perform diagnostics using schematics, drawings, and service manuals for machinery, robotics, and solar equipment.\n, • Disassemble, repair, and reassemble motors, generators, and rectifiers; calibrate instruments with specialized testing equipment.\n, • Train and assist Electrical Technicians II B and III, while keeping the work area clean and orderly.\n\n Why Join Us Do you want to be part of a company culture that encourages employees to build their career, apply their knowledge while using cutting‑edge technology, and achieve challenging goals? We provide the foundation and resources to help you stay motivated, inspired, and productive. If you are driven, dedicated, and enjoy doing what you love, then we want you to join our journey and build a better tomorrow with you. We are committed to supporting your work‑life balance and overall well‑being, offering flexible scheduling options. Learn more about Lockheed Martin's comprehensive benefits package here. Further Information About This Opportunity This position is in Dallas. Discover more about our Dallas, Texas location. MUST BE A U.S. CITIZEN - This position is located at a facility that requires special access. Basic Qualifications: • High school degree or equivalent., • At least 5 years' experience in the electrical industry., • Previous experience with electrical and associated electronic equipment, instruments, machinery, motors and transformers., • Knowledge of the National Electric Code as it pertains to the facility and machineries within the plant, • Must be able to work on 1st or 2nd shifts as defined by the Collective Bargaining Agreement, • At least 4 years of trades training., • Ingenuity to plan, construct, install, test, modify, repair and maintain a wide variety of electrical and associated electronic equipment when only limited information or general methods are available., • Show initiative to act prudently and decisively during emergencies to avoid damage to equipment and/or facility and prevent production delays. With our employees as our priority, we provide diverse career opportunities designed to propel, develop, and boost agility. Our flexible schedules, competitive pay, and comprehensive benefits enable our employees to live a healthy, fulfilling life at and outside of work. We place an emphasis on empowering our employees by fostering an inclusive environment built upon integrity and corporate responsibility. If this sounds like a culture you connect with, you're invited to apply for this role. Or, if you are unsure whether your experience aligns with the requirements of this position, we encourage you to search on Lockheed Martin Jobs, and apply for roles that align with your qualifications. Experience Level: Hourly/Non-Exempt Business Unit: MISSILES AND FIRE CONTROL Relocation Available: No Career Area: Facilities Type: Full-Time Shift: Second

Job ID: 720812BR Date posted: Mar. 19, 2026 Description: You will be the Industrial Electrician for the Electrical Services Team. Our team is responsible for constructing, installing, testing, calibrating, troubleshooting, repairing, and maintaining complex production machinery and associated electrical/electronic equipment. What You Will Be Doing As the Industrial Electrician you will be responsible for a wide range of electrical tasks that keep our manufacturing operations running at peak performance. Your responsibilities will include: \n • Construct, install, test, calibrate, troubleshoot, repair, and maintain complex production machinery and related electrical/electronic systems.\n, • Build and maintain control panels, including installation of instrument meters and temperature controllers.\n, • Perform diagnostics using schematics, drawings, and service manuals for machinery, robotics, and solar equipment.\n, • Disassemble, repair, and reassemble motors, generators, and rectifiers; calibrate instruments with specialized testing equipment.\n, • Train and assist Electrical Technicians II B and III, while keeping the work area clean and orderly.\n\n Why Join Us Do you want to be part of a company culture that encourages employees to build their career, apply their knowledge while using cutting‑edge technology, and achieve challenging goals? We provide the foundation and resources to help you stay motivated, inspired, and productive. If you are driven, dedicated, and enjoy doing what you love, then we want you to join our journey and build a better tomorrow with you. We are committed to supporting your work‑life balance and overall well‑being, offering flexible scheduling options. Learn more about Lockheed Martin's comprehensive benefits package here. Further Information About This Opportunity This position is in Dallas. Discover more about our Dallas, Texas location. MUST BE A U.S. CITIZEN - This position is located at a facility that requires special access. Basic Qualifications: • High school degree or equivalent., • At least 5 years' experience in the electrical industry., • Previous experience with electrical and associated electronic equipment, instruments, machinery, motors and transformers., • Knowledge of the National Electric Code as it pertains to the facility and machineries within the plant, • Must be able to work on 1st or 2nd shifts as defined by the Collective Bargaining Agreement, • At least 4 years of trades training., • Ingenuity to plan, construct, install, test, modify, repair and maintain a wide variety of electrical and associated electronic equipment when only limited information or general methods are available., • Show initiative to act prudently and decisively during emergencies to avoid damage to equipment and/or facility and prevent production delays. With our employees as our priority, we provide diverse career opportunities designed to propel, develop, and boost agility. Our flexible schedules, competitive pay, and comprehensive benefits enable our employees to live a healthy, fulfilling life at and outside of work. We place an emphasis on empowering our employees by fostering an inclusive environment built upon integrity and corporate responsibility. If this sounds like a culture you connect with, you're invited to apply for this role. Or, if you are unsure whether your experience aligns with the requirements of this position, we encourage you to search on Lockheed Martin Jobs, and apply for roles that align with your qualifications. Experience Level: Hourly/Non-Exempt Business Unit: MISSILES AND FIRE CONTROL Relocation Available: No Career Area: Facilities Type: Full-Time Shift: First

Job ID: 705830BR Date posted: Mar. 18, 2026 Description: You will be a Lead Circuit Card Designer for the Lockheed Martin Missiles and Fire Control (MFC) team. Our team is responsible for developing cutting-edge technologies for small form factor missiles, including processor boards and interface board designs. What You Will Be Doing As a Lead Circuit Card Designer, you will be responsible for leading design and development of circuit card designs for cutting edge systems. You will work closely with your team and electronic packaging engineers and systems engineers to ensure seamless integration. Your responsibilities will include: • Leading the design and development of circuit card designs for cutting edge systems, • Collaborating with electronic packaging engineers and systems engineers, • Leading design, build, and integration of bread board and brass board designs to fit the desired form factor, • Working in a lab environment to test, evaluate, and integrate board designs, • Utilizing schematic capture and board layout tools Why Join Us We're looking for a skilled and collaborative Lead Circuit Card Designer to join our team. As an ideal candidate, you're a creative problem-solver with excellent communication skills, able to work effectively in a team environment. In this role, you'll have the opportunity to work on cutting-edge technologies and contribute to the development of advanced defense systems. With a dynamic and supportive team, flexible work schedules, and opportunities for career growth, we offer a unique and rewarding work environment. If you're passionate about digital circuit design and looking for a new challenge, we encourage you to apply. We offer flexible work schedules to comprehensive benefits investing in your future and security, Learn more about Lockheed Martin's comprehensive benefits package here. Further Information About This Opportunity: This position is in Dallas. Discover more about our Dallas, Texas location. MUST BE A U.S. CITIZEN - This position is located at a facility that requires special access. The selected candidate must be able to obtain a secret clearance. #MFCnews #mfcgomac Basic Qualifications: • Bachelor of Science degree or higher from an accredited college in Electrical Engineering or equivalent, with a minimum of eight years of professional experience, • Experience leading teams to design circuit cards, • Experience with circuit card design, integration, and test, • Experience with Siemens Xpedition Enterprise or equivalent for schematic capture, • Experience with Cadence Pspice or equivalent for circuit simulation and analysis, • Demonstrated effective communication skills, • Ability to obtain a Secret clearance With our employees as our priority, we provide diverse career opportunities designed to propel, develop, and boost agility. Our flexible schedules, competitive pay, and comprehensive benefits enable our employees to live a healthy, fulfilling life at and outside of work. We place an emphasis on empowering our employees by fostering an inclusive environment built upon integrity and corporate responsibility. If this sounds like a culture you connect with, you're invited to apply for this role. Or, if you are unsure whether your experience aligns with the requirements of this position, we encourage you to search on Lockheed Martin Jobs, and apply for roles that align with your qualifications. Experience Level: Experienced Professional Business Unit: MISSILES AND FIRE CONTROL Relocation Available: Possible Career Area: Hardware Engineering Type: Full-Time Shift: First

Overview Keysight is at the forefront of technology innovation, delivering breakthroughs and trusted insights in electronic design, simulation, prototyping, test, manufacturing, and optimization. Our ~15,000 employees create world-class solutions in communications, 5G, automotive, energy, quantum, aerospace, defense, and semiconductor markets for customers in over 100 countries. Learn more about what we do. Our award-winning culture embraces a bold vision of where technology can take us and a passion for tackling challenging problems with industry-first solutions. We believe that when people feel a sense of belonging, they can be more creative, innovative, and thrive at all points in their careers. Responsibilities This is an exciting opportunity for a Physical/Dimensional technician in the calibration of Test and Measurement Equipment. This is role for a key individual who will work full time at a Keysight calibration site located in Richardson, TX. Specific duties include: \n • Perform work related to the calibration of test, measurement and diagnostic equipment.\n, • A background in physical/dimensional, thermal and electronic calibration.\n, • Able to utilize written and automated calibration procedures.\n, • Evaluate test failures, distinguishing between process, hardware & system software to determine if repair or re-alignment is required.\n, • Accurately enters data into Calibration management software and datasheets.\n 1+ years of relevant experience, with typically 4+ years practical experience. A relevant degree or certificate is desired but not required. Position requires: \n • 1+ years directly related experience as Field Service Engineer or Calibration Engineer/Technician\n, • Skills in the calibration all types of Keysight and Multivendor Test Equipment.\n, • Strong written and verbal communication skills.\n, • Able to utilize Windows and Microsoft Office (Excel).\n USD $56,780.00 - USD $94,630.00 Year Note: For other locations, pay ranges will vary by region This role is eligible for Keysight Results Bonus Program US Employees may be eligible for the following benefits: \n • Medical, dental and vision\n, • Health Savings Account\n, • Health Care and Dependent Care Flexible Spending Accounts\n, • Life, Accident, Disability insurance\n, • Business Travel Accident and Business Travel Health\n, • 401(k) Plan\n, • Flexible Time Off, Paid Holidays\n, • Paid Family Leave\n, • Discounts, Perks\n, • Tuition Reimbursement\n, • Adoption Assistance\n, • ESPP (Employee Stock Purchase Plan)\n

Job ID: 713889BR Date posted: Mar. 18, 2026 Description: You will be the General Maintenance Mechanic for the Maintenance Team. Our team is responsible for ensuring operational readiness of plant facilities and supporting production equipment. What You Will Be Doing As the General Maintenance Mechanic you will be responsible for a broad spectrum of construction, maintenance, repair, and fabrication tasks that keep our facilities running smoothly. Your responsibilities will include, but are not limited to: \n • Perform preventative maintenance on rooftop units, air handlers, hoists, paint booths, and other critical equipment.\n, • Construct and repair structures such as storage sheds, metal frames, security fencing, and equipment foundations.\n, • Fabricate and install steel, sheet‑metal, shelving, racks, benches, and air‑duct systems.\n, • Operate heavy machinery, rig loads, and move large equipment safely.\n, • Maintain clean work areas, report issues, and support the lead supervisor.\n\n Why Join Us Do you want to be part of a company culture that encourages employees to build their career, apply their knowledge while using cutting‑edge technology, and achieve challenging goals? We provide the foundation and resources to help you stay motivated, inspired, and productive. If you are driven, dedicated, and enjoy doing what you love, then we want you to join our journey and build a better tomorrow with you. We are committed to supporting your work‑life balance and overall well‑being, offering flexible scheduling options. Learn more about Lockheed Martin's comprehensive benefits package here. Further Information About This Opportunity This position is in Dallas. Discover more about our Dallas, Texas location. MUST BE A U.S. CITIZEN - This position is located at a facility that requires special access. Basic Qualifications: • High school degree or equivalent, • At least 3-5 years of related experience, • Must be able to work on 1st or 2nd shifts as defined by the Collective Bargaining Agreement, • Experience operating forklift With our employees as our priority, we provide diverse career opportunities designed to propel, develop, and boost agility. Our flexible schedules, competitive pay, and comprehensive benefits enable our employees to live a healthy, fulfilling life at and outside of work. We place an emphasis on empowering our employees by fostering an inclusive environment built upon integrity and corporate responsibility. If this sounds like a culture you connect with, you're invited to apply for this role. Or, if you are unsure whether your experience aligns with the requirements of this position, we encourage you to search on Lockheed Martin Jobs, and apply for roles that align with your qualifications. Experience Level: Hourly/Non-Exempt Business Unit: MISSILES AND FIRE CONTROL Relocation Available: No Career Area: Facilities Type: Full-Time Shift: First

Job ID: 720812BR Date posted: Mar. 19, 2026 Description: You will be the Industrial Electrician for the Electrical Services Team. Our team is responsible for constructing, installing, testing, calibrating, troubleshooting, repairing, and maintaining complex production machinery and associated electrical/electronic equipment. What You Will Be Doing As the Industrial Electrician you will be responsible for a wide range of electrical tasks that keep our manufacturing operations running at peak performance. Your responsibilities will include: \n • Construct, install, test, calibrate, troubleshoot, repair, and maintain complex production machinery and related electrical/electronic systems.\n, • Build and maintain control panels, including installation of instrument meters and temperature controllers.\n, • Perform diagnostics using schematics, drawings, and service manuals for machinery, robotics, and solar equipment.\n, • Disassemble, repair, and reassemble motors, generators, and rectifiers; calibrate instruments with specialized testing equipment.\n, • Train and assist Electrical Technicians II B and III, while keeping the work area clean and orderly.\n\n Why Join Us Do you want to be part of a company culture that encourages employees to build their career, apply their knowledge while using cutting‑edge technology, and achieve challenging goals? We provide the foundation and resources to help you stay motivated, inspired, and productive. If you are driven, dedicated, and enjoy doing what you love, then we want you to join our journey and build a better tomorrow with you. We are committed to supporting your work‑life balance and overall well‑being, offering flexible scheduling options. Learn more about Lockheed Martin's comprehensive benefits package here. Further Information About This Opportunity This position is in Dallas. Discover more about our Dallas, Texas location. MUST BE A U.S. CITIZEN - This position is located at a facility that requires special access. Basic Qualifications: • High school degree or equivalent., • At least 5 years' experience in the electrical industry., • Previous experience with electrical and associated electronic equipment, instruments, machinery, motors and transformers., • Knowledge of the National Electric Code as it pertains to the facility and machineries within the plant, • Must be able to work on 1st or 2nd shifts as defined by the Collective Bargaining Agreement, • At least 4 years of trades training., • Ingenuity to plan, construct, install, test, modify, repair and maintain a wide variety of electrical and associated electronic equipment when only limited information or general methods are available., • Show initiative to act prudently and decisively during emergencies to avoid damage to equipment and/or facility and prevent production delays. With our employees as our priority, we provide diverse career opportunities designed to propel, develop, and boost agility. Our flexible schedules, competitive pay, and comprehensive benefits enable our employees to live a healthy, fulfilling life at and outside of work. We place an emphasis on empowering our employees by fostering an inclusive environment built upon integrity and corporate responsibility. If this sounds like a culture you connect with, you're invited to apply for this role. Or, if you are unsure whether your experience aligns with the requirements of this position, we encourage you to search on Lockheed Martin Jobs, and apply for roles that align with your qualifications. Experience Level: Hourly/Non-Exempt Business Unit: MISSILES AND FIRE CONTROL Relocation Available: No Career Area: Facilities Type: Full-Time Shift: First

Company Description Smiths Interconnect, is a global leader in the design and manufacture of high-performance interconnect solutions. Our products are used in mission-critical applications across industries such as aerospace, defense, telecommunications, and industrial markets. At Smiths Interconnect, we are committed to innovation, quality, and providing cutting-edge solutions that connect the world's most demanding systems. Smiths Interconnect is part of Smiths Group. For over 170 years, Smiths has been pioneering progress by engineering for a better future. We serve millions of people every year, to help create a safer, more efficient and productive, and better-connected world across four global markets: energy, security & defense, space & aerospace and general industrial. Listed on the London Stock Exchange, Smiths employs c.16,000 colleagues in over 50 countries. Job Description Produces machined parts by setting up and operating a computer numerical control (CNC) machine; maintaining quality and safety standards; keeping records; maintaining equipment and supplies. Responsibilities: \n • Setup and operation of Fanuc & HAAS CNC milling centers using Master CAM software.\n, • Utilize blueprints, sketches, drawings, specifications, or sample parts to determine dimensions and tolerances of finished work piece, sequence of operations, and setup requirements.\n, • Work to close tolerances using required gauges and inspection knowledge.\n, • Document information pertaining to setup and operation of each job utilizing written descriptions, sketches and/or photos.\n, • Train junior operators/apprentices.\n, • Perform other tasks as assigned.\n\n Qualifications Technical Knowledge, Skills and Abilities: \n • 3-7 years of manual machining and CNC setup and operation utilizing conversational programming.\n, • Proficiency in Master CAM software preferred\n, • Must have a high work ethic, be a team player and work with a since of urgency.\n, • Ability to read and comprehend complex machine and component drawings.\n, • Ability speak/read English and understand verbal instructions.\n, • Ability to analyze and solve problems.\n, • Detailed oriented, self-motivated, ability to work well with limited supervision.\n, • Ability to train others.\n Security: Please State if US Citizen or permanent Resident Required Additional Information All your information will be kept confidential according to EEO guidelines. We believe that different perspectives and backgrounds are what make a company flourish. All qualified applicants will receive equal consideration for employment regardless of color, religion, sex, sexual orientation, gender identity, national origin, economic status, disability, age, or any other legally protected characteristics. We are proud to be an inclusive company with values grounded in equality and ethics, where we celebrate, support, and embrace diversity. At no time during the hiring process will Smiths Group, nor any of our recruitment partners ever request payment to enable participation - including, but not limited to, interviews or testing. Avoid fraudulent requests by applying jobs directly through our career's website (Careers - Smiths Group plc)

Job details Domain Performance and Support Job field / Job profile Quality - Program / customer quality assurance Job title Quality Inspector Employment type Permanent Professional category Employees / Staff Part time / Full time Full-time Job description Summary of Job Purpose: • The role's main focus is to perform Inspection duties (Receiving, In-process, Final, and Shipment) in accordance with the AS9102 standard, Corrective Actions, and other duties as assigned. Essential Duties and Responsibilities: • Required skills include, Quality inspection experience within an aerospace manufacturing environment, • Inspects products, and processes to insure conformance with quality standards and specifications., • Utilizes sophisticated tools, instruments, and techniques to accomplish Inspection assignments., • Maintains all controlled document files and test records in a timely and accurate manner., • Maintains excellent working relationship with other employees, departments and suppliers., • Complies with AS9100 and departmental policies, procedures and FAA regulations., • Effective performance of assigned tasks to ensure that items inspected meet all applicable requirements., • Perform customer specific and AS9102 First Article Inspections; Performs product acceptance inspections as per specific customer vendor release programs., • Verify the product is to the latest or appropriate Drawing level, • Verify the Certificate of Conformance reflects all the required information per requirements, • Other duties as assigned including helping other areas of the quality department But what else? (advantages, specificities, etc.) Physical Requirements : Production Floor • While performing the duties of this Job, the employee is regularly required to sit; use hands to finger, handle, or feel and talk or hear. The employee is frequently required to reach with hands and arms. The employee is occasionally required to stand and walk., • The employee must occasionally lift and/or move up to 25 pounds. Specific vision abilities required by this job include close vision and color vision., • The noise level in the work environment is low to quiet. Candidate skills & requirements Required Competencies: Qualification: • High school diploma or GED equivalent and a minimum of 5 years of manufacturing or quality experience within the aerospace environment, Bachelor degree preferred., • Legally authorized to work in the US without company sponsorship, • This position requires use of information or access to hardware that is subject to the International Traffic in Arms Regulations (ITAR). All applicants must be U.S. persons within the meaning of ITAR. ITAR defines a U.S. person as a U.S. Citizen, U.S. Permanent Resident (i.e. 'Green Card Holder'), Political Asylee, or Refugee Position Criteria: • Good oral and written communication., • Able to read and interpret engineering drawings and specifications, • A practical understanding of the AS9102 standard,, • A good level of computer literacy, to include familiarity with Microsoft Office applications. ERP experience, SAP preferred, • Attention to detail, • Working knowledge of blueprint reading, GD&T, mechanical inspection methods, international quality standards and customer standards., • Excellent time management., • Ability to self-manage with minimum supervision Annual salary Based on Market rate Job location Job location North America, United States, Texas City (-ies) Grand Prairie, TX 75052 Applicant criteria Minimum education level achieved High School Diploma/GED Equivalent Minimum experience level required More than 3 years ITAR Controlled Position: Select "Yes" if role requires U.S. citizenship/permanent residency Yes

For those who want to keep growing, learning, and evolving. We at Kelly® hear you, and we’re here for you! We’re seeking a Technical Support Associate to work at a leading organization in Richardson, TX. Sound good? Take a closer look below. You owe it to yourself to consider this great new opportunity. \n\nSalary/Pay Rate/Compensation: $28.93/hr - $31.24/hr, depending on shift \n \n1st Shift: 6:00 AM or 7:00 AM start time for 6–8 weeks \n2nd Shift: Approximately 2:30 PM – Midnight \nSchedule: 9/80 (every other Friday off); occasional Friday, weekend, and call-in work required \nMust be able to work 2nd shift after training, with flexibility for weekends/call-ins\n\nWhy you should apply to be Technical Support Associate:\n\n\n\t • Competitive pay rates with shift differentials\n\t, • Work in a fast-paced, high-demand manufacturing environment\n\t, • Opportunity to collaborate with multidisciplinary teams\n\t, • Hands-on technical role supporting advanced optics manufacturing\n\t, • Every other Friday off with a 9/80 schedule\n\t, • Gain experience with state-of-the-art equipment and processes\n\n\nWhat’s a typical day as Technical Support Associate? You’ll be:\n\n\n\t, • Troubleshooting, maintaining, and repairing electronic, mechanical, and automated manufacturing equipment\n\t, • Leading or supporting installation and upgrades of new or existing production equipment\n\t, • Developing and following preventive maintenance procedures, including Lockout/Tagout\n\t, • Using multimeters, current probes, schematics, and technical manuals to diagnose complex issues\n\t, • Collaborating cross-functionally with Engineering, Maintenance, Quality, and Operations to ensure equipment safety, reliability, and efficiency\n\t, • Supporting layout planning, capital equipment procurement, and documentation updates\n\t, • Participating in call-in and weekend work as needed to support critical operations\n\t, • Following all OSHA and safety protocols\n\n\nThis job might be an outstanding fit if you:\n\n\n\t, • Have a minimum of 5–8 years of hands-on experience in equipment maintenance within a manufacturing or production setting (must have)\n\t, • Possess strong mechanical aptitude and troubleshooting skills (must have)\n\t, • Have experience working with automated equipment, control systems, and high-voltage systems (480V, 208V, 110V, and DC voltages) (must have)\n\t, • Are proficient with multimeters, current probes, diagnostic instruments, and reading schematics/technical drawings (must have)\n\t, • Have an Associate degree in Electronics, Mechanical Technology, or a related technical field (must have)\n\t, • Are able to work from schematics, technical drawings, manuals, and verbal instructions\n\t, • Are experienced in collaborating with multidisciplinary teams and working independently with minimal supervision\n\t, • Can work 2nd shift after initial training and are flexible for weekend/call-in requirements\n\t, • Are comfortable working in a hands-on, high-voltage environment—this is not a desk or technician helper role\n\t \n\t\t\t\t\n\t\t\t\t\t\n\t\t\t\t\n\t\t\t\t\n\t\t\t\tAs part of our promise to talent, Kelly supports those who work with us through a variety of benefits, perks, and work-related resources. Kelly offers eligible employees voluntary benefit plans including medical, dental, vision, telemedicine, term life, whole life, accident insurance, critical illness, a legal plan, and short-term disability. As a Kelly employee, you will have access to a retirement savings plan, service bonus and holiday pay plans (earn up to eight paid holidays per benefit year), and a transit spending account. In addition, employees are entitled to earn paid sick leave under the applicable state or local plan. Click here for more information on benefits and perks that may be available to you as a member of the Kelly Talent Community. Find what’s next with Kelly®. As a worker today, it’s up to you to take charge of your career and look for opportunities to learn, grow, and achieve your potential. Helping you find what’s next is what we’re all about. We know what’s going on in the evolving world of work—just ask the 440,000 people we employ each year. Connecting with us means getting the support, guidance, and opportunities needed to take your career where you may have never imagined.\n\t\t\t \n\t\t\t \n\t\t\t\t\n\t\t\t\t\t\n\t\t\t\t\n\t\t\t\t\n\t\t\t\t About Kelly Work changes everything. And at Kelly, we’re obsessed with where it can take you. To us, it’s about more than simply accepting your next job opportunity. It’s the fuel that powers every next step of your life. It’s the ripple effect that changes and improves everything for your family, your community, and the world. Which is why, here at Kelly, we are dedicated to providing you with limitless opportunities to enrich your life—just ask the 300,000 people we employ each year. Kelly is committed to providing equal employment opportunities to all qualified employees and applicants regardless of race, color, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, age, marital status, pregnancy, genetic information, or any other legally protected status, and we take affirmative action to recruit, employ, and advance qualified individuals with disabilities and protected veterans in the workforce. Requests for accommodation related to our application process can be directed to the Kelly Human Resource Knowledge Center. Kelly complies with the requirements of California’s state and local Fair Chance laws. A conviction does not automatically bar individuals from employment. Kelly participates in E-Verify and will provide the federal government with your Form I-9 information to confirm that you are authorized to work in the U.S. \n\t\t\t \n\t\t\t

Job ID: 719533BR Date posted: Mar. 10, 2026 Description: You will be the Manufacturing Engineer (Electronics Fabrication, Level 2) for the Missiles & Fire Control Manufacturing team. Our team is responsible for developing and supporting manufacturing processes for electrical components within the MFC electrical shop. What You Will Be Doing As the Manufacturing Engineer (Electronics Fabrication, Level 2) you will be responsible for delivering robust, repeatable processes that enable high‑quality wiring and harness assemblies. Your responsibilities will include, but are not limited to: \n • Develop and support manufacturing processes for wiring and harness assemblies.\n, • Create and maintain work instructions and task lists.\n, • Develop rework/repair instructions based on quality notifications.\n, • Participate in design and producibility reviews and drive process improvements.\n, • Validate new equipment and processes, and collaborate with shop‑floor, quality, and program teams.\n\n Why Join Us The ideal candidate is a collaborative engineer who thrives in a fast‑paced environment, enjoys solving complex manufacturing challenges, and is eager to influence both shop‑floor operations and product design. This role offers direct impact on critical missile and fire‑control systems and provides opportunities to work across multiple disciplines. We are committed to supporting your work‑life balance and overall well‑being, offering flexible scheduling options. Learn more about Lockheed Martin's comprehensive benefits package here. Further Information About This Opportunity This position is in Dallas. Discover more about our Dallas, Texas location. MUST BE A U.S. CITIZEN - This position is located at a facility that requires special access. The selected candidate must have the ability to obtain a Secret clearance. Basic Qualifications: • Bachelor's degree in Manufacturing Engineering, Mechanical Engineering, Electrical Engineering, Aerospace Engineering, or a related Engineering discipline from an accredited college., • Able to interpret drawings and specifications to develop and translate into work instructions., • Proficient skill level with Microsoft Office applications: Word, Excel, PowerPoint, etc., • Knowledge of lean manufacturing principles, • Process Improvement experience, • Experience creating manufacturing plans and work instructions, • This facility requires special access; therefore, you must be a US Citizen., • Experience with Standards (AS 91000 / AS9102), IPC, J-STD, and MIL-STSD specifications, • Experience with disposition of non-conforming products and with root cause/corrective action definition., • Experience in establishing Performance Metrics for identifying process improvement., • Ability to liaison between Production, • SAP ERP Experience With our employees as our priority, we provide diverse career opportunities designed to propel, develop, and boost agility. Our flexible schedules, competitive pay, and comprehensive benefits enable our employees to live a healthy, fulfilling life at and outside of work. We place an emphasis on empowering our employees by fostering an inclusive environment built upon integrity and corporate responsibility. If this sounds like a culture you connect with, you're invited to apply for this role. Or, if you are unsure whether your experience aligns with the requirements of this position, we encourage you to search on Lockheed Martin Jobs, and apply for roles that align with your qualifications. Experience Level: Experienced Professional Business Unit: MISSILES AND FIRE CONTROL Relocation Available: Possible Career Area: Manufacturing Type: Full-Time Shift: First

Job ID: 713889BR Date posted: Mar. 18, 2026 Description: You will be the General Maintenance Mechanic for the Maintenance Team. Our team is responsible for ensuring operational readiness of plant facilities and supporting production equipment. What You Will Be Doing As the General Maintenance Mechanic you will be responsible for a broad spectrum of construction, maintenance, repair, and fabrication tasks that keep our facilities running smoothly. Your responsibilities will include, but are not limited to: \n • Perform preventative maintenance on rooftop units, air handlers, hoists, paint booths, and other critical equipment.\n, • Construct and repair structures such as storage sheds, metal frames, security fencing, and equipment foundations.\n, • Fabricate and install steel, sheet‑metal, shelving, racks, benches, and air‑duct systems.\n, • Operate heavy machinery, rig loads, and move large equipment safely.\n, • Maintain clean work areas, report issues, and support the lead supervisor.\n\n Why Join Us Do you want to be part of a company culture that encourages employees to build their career, apply their knowledge while using cutting‑edge technology, and achieve challenging goals? We provide the foundation and resources to help you stay motivated, inspired, and productive. If you are driven, dedicated, and enjoy doing what you love, then we want you to join our journey and build a better tomorrow with you. We are committed to supporting your work‑life balance and overall well‑being, offering flexible scheduling options. Learn more about Lockheed Martin's comprehensive benefits package here. Further Information About This Opportunity This position is in Dallas. Discover more about our Dallas, Texas location. MUST BE A U.S. CITIZEN - This position is located at a facility that requires special access. Basic Qualifications: • High school degree or equivalent, • At least 3-5 years of related experience, • Must be able to work on 1st or 2nd shifts as defined by the Collective Bargaining Agreement, • Experience operating forklift With our employees as our priority, we provide diverse career opportunities designed to propel, develop, and boost agility. Our flexible schedules, competitive pay, and comprehensive benefits enable our employees to live a healthy, fulfilling life at and outside of work. We place an emphasis on empowering our employees by fostering an inclusive environment built upon integrity and corporate responsibility. If this sounds like a culture you connect with, you're invited to apply for this role. Or, if you are unsure whether your experience aligns with the requirements of this position, we encourage you to search on Lockheed Martin Jobs, and apply for roles that align with your qualifications. Experience Level: Hourly/Non-Exempt Business Unit: MISSILES AND FIRE CONTROL Relocation Available: No Career Area: Facilities Type: Full-Time Shift: First

February 2026 Update GL-5/7 grade levels Border Patrol Agent (BPA) – in the Federal Security and Public Safety Sector (Entry Level) A MISSION WORTHY OF A CAREER! If you’re looking for “just a job,” then stop reading right now. But, if you’re looking for a long-term federal law enforcement career, one that makes a difference every day to our country and its citizens, then the U.S. Border Patrol (USBP) would like you to take the first step to becoming an entry level Border Patrol Agent. USBP is hiring immediately to fill full-time, entry-level, career positions in federal law enforcement where your prior experience in public safety, security, military police or law enforcement may qualify. Train and work with an elite team of professionals whose camaraderie, pride, and sense of purpose are hallmarks of their daily mission of protecting America. Now is the time to make your move because, along with excellent base pay, exceptional benefits, and job stability, USBP is offering up to $60,000 in additional incentives (see details below). Salary and Benefits Annual base salary for newly appointed BPAs varies per grade, as follows: GL-5/GL-7 $51,632 - $92,219 per year. Border Patrol Agents are eligible to select from an array of federal employment benefits that include health, dental and other insurance plans, a generous annual and sick leave program, and participation in the Thrift Savings Plan, a retirement plan akin to a traditional ROTH 401(k) offering. Newly appointed Border Patrol Agents (as defined in 5 CFR 575.102 ) will be eligible for up to $20,000 in incentives. The first $10,000 will be paid upon successful completion of the Border Patrol Academy, with the remaining $10,000 awarded for accepting a prioritized location such as Sierra Blanca, Presidio, Sanderson, Comstock, Freer or Hebbronville, TX; Lordsburg, NM; or Ajo, AZ. Newly appointed Border Patrol Agents may also qualify for up to $40,000 in additional incentives distributed over their first four years. Duty Locations IMPORTANT NOTICED: Duty assignments available at the time of offer may include the Southwest Border, including prioritized locations. U.S. Border Patrol determines duty assignments at the time of offer based on operational needs, which may or may not align with candidates’ first-choice preferences. RELOCATION MAY BE REQUIRED. Duty location impacts pay rates; locality pay for federal law enforcement is higher in some locations than others. A fully trained BPA may be eligible for up to an additional 25% of base pay per the BPA Pay Reform Act of 2014. This is a career ladder position with a grade level progression of GL-5, GL-7, GL-9, GS-11, and GS-12. You will be eligible for a promotion to the next higher grade level (without reapplying) once you successfully complete 52 weeks in each grade level. Duty Locations: You will be asked to select your preferred location for one of the following mission critical locations:> Big Bend Sector Stations - *Presidio, Van Horn, *Sanderson, Alpine, *Sierra Blanca, Marfa Buffalo Sector Stations - Wellesley Island Del Rio Sector Stations - Del Rio, Brackettville, *Comstock, Eagle Pass North, Eagle Pass South, Carrizo Springs, Uvalde El Paso Sector Stations - Alamogordo, Clint, Deming, El Paso, Fort Hancock, Las Cruces, *Lordsburg, Santa Teresa, Ysleta El Centro Sector Stations - El Centro, Indio, Calexico Grand Forks Sector Stations - Pembina Havre Sector Stations - Havre, Malta, Plentywood, Scobey, Sweetgrass Houlton Sector Stations - Calais, Fort Fairfield, Jackman, Rangeley, Van Buren Laredo Sector Stations - Laredo South, Cotulla, *Hebbronville, Laredo West, *Freer, Laredo North, Zapata Rio Grande Valley Sector Stations - Rio Grande City, Fort Brown, McAllen, Brownsville, Falfurrias, Weslaco, Kingsville, Harlingen San Diego Sector Stations - Boulevard, Brownfield, Campo, Chula Vista, Imperial Beach, Murrieta, San Clemente Spokane Sector Stations - Colville, Curlew, Metaline Falls, Oroville Swanton Sector Stations - Beecher Falls, Burke, Champlain, Newport, Richford Tucson Sector Stations - *Ajo, Tucson, Nogales, Douglas, Brian A Terry, Sonoita, Casa Grande, Three Points Substation, Willcox Yuma Sector Stations - Blythe, Yuma, Wellton Duties and Responsibilities As a BPA, you will be part of our 60,000+ workforce that strives to protect the American people by safeguarding our borders, deterring illicit activity, and enhancing the nation’s economic prosperity. Being a BPA makes you a valuable member of the Federal Law Enforcement Officer (LEO) profession. Typical assignments include: Detecting and questioning people suspected of violating immigration and custom laws and inspecting documents and possessions to determine citizenship or violations Preventing and apprehending undocumented noncitizens and smugglers of noncitizens at or near the borders by maintaining surveillance from covert positions to include using infrared scopes during night operations Interpreting and following tracks, marks, and other physical evidence of illegal entry of persons or contraband Performing farm checks, building checks, traffic checks, city patrols, and transportation checks Patrolling the international boundary and coastal waterways using a variety of government assets such as vehicles, horses, vessels, watercraft, off-road vehicles, ATVs, snowmobiles, and motorcycles for the accomplishment of the USBP Mission. Qualifications You qualify for the GL-5 grade level if you possess one of the following: Experience: One (1) year of general work experience that demonstrates the ability to take charge, make sound decisions, and maintain composure in stressful situations; to learn regulations, methods, and techniques through classroom training and/or on-the-job instruction; and the ability to gather concise information through questioning, observation, and examination of documents and records; OR Education Substitution: A bachelor's degree or successful completion of a full four-year course of study in any field leading to a bachelor's degree from an accredited college or university; OR Combination of Experience and Education: A combination of general work experience AND successfully completed college education. This will be calculated using your resume and official or unofficial transcripts submitted with your application. You qualify for the GL-7 grade level if you possess one of the following: Experience: One year of specialized work experience that shows you have the skills necessary to: Make sound judgments and decisions in the use of firearms. Deal effectively with people in a courteous and tactful manner in connection with law enforcement matters. Analyze information rapidly and make prompt decisions where you will be expected to make arrests after the completion of required training and apply these skills in a law enforcement capacity such as criminal code enforcement, determining violations of laws, correctional or rehabilitation work involving criminal offenders, security, military, etc. The above experience will be applied in connection with the following: Make arrests and exercise sound judgment in the use of firearms; deal effectively with people in a courteous manner in connection with law enforcement matters; analyze information rapidly and make prompt decisions; or develop and maintain contact with a network of informants. Education Substitution for the GL-7 grade level: A bachelor's degree with superior academic achievement, which is based on (1) class standing, (2) grade-point average (i.e., GPA of 3.0 or higher out of a possible 4.0), or (3) honor society membership. Or will receive a bachelor's degree with Superior Academic Achievement. Or one full year of graduate-level education in a field of study related to law enforcement (e.g., criminal justice, homeland security, justice studies, law enforcement, courts and judicial systems, forensic technology, forensic psychology, or corrections and rehabilitation) from an accredited college or university; OR A Combination of Experience and Education: This will be calculated using your resume and official or unofficial transcripts submitted with your application. Note: If you have previous or current law enforcement or military law enforcement experience, you may qualify at the GL-9 and or GS-11 grade level. Please refer to the BPA GL-9 - 11 announcement. Other Requirements Citizenship: You must be a U.S. Citizen to apply for this position. Residency: You must have had primary U.S. residency (includes protectorates as declared under international law) for at least three of the last five years. Age Restriction: In accordance with Public Law 100-238, this position is covered under law enforcement retirement provisions. Candidates must be referred for selection to the Border Patrol Agent position before reaching their 40th birthday in accordance with Department of Homeland Security Directive 251-03. The age restriction may not apply if you are currently serving or have previously served in a federal civilian law enforcement (non-military) position covered by Title 5 U.S.C. 8336(c) or Title 5 U.S.C. 8412(d). Veterans’ Preference: You may also be eligible for an excepted service Veterans Recruitment Appointment (VRA). The age restriction does not apply if you are Veterans' Preference eligible. Formal Training: After you are hired, you will be detailed to the U.S. Border Patrol Academy in Artesia, New Mexico, for approximately six (6) months of intensive instruction in immigration and nationality laws, law enforcement and USBP-specific operations, driver training, physical techniques, firearms, and other courses. Border Patrol work requires the ability to speak and read Spanish, as well as English. Border Patrol Agents will be provided training to become proficient with the Spanish language at the Academy. How to Apply: Click the Apply button on this site. You will be linked to the CBP Talent Network registration page. For Position of Interest, select Border Patrol Agent, then complete the pre-screening questions. You’ll then receive a link(s) to the BPA Job Opening Announcements (JOAs) on USAJOBS, the federal government’s official employment site, to complete your application. Be certain to review ALL details of the job opportunity announcement and follow all instructions in the application process, including items (resume, transcripts, etc.) to submit. You will be evaluated based on your resume, supporting documents, and the BPA Entrance Exam. If you have questions about the application process, contact a recruiter through the U.S. Border Patrol page: careers.cbp.gov/s/usbp. As a subscriber to the CBP Talent Network, you’ll receive monthly emails with information about webinars, career expos, and future opportunities with CBP.

SAME MISSION, NEW DRIVE! You love protecting your community and doing your part to keep our nation safe. But maybe you’re looking for a change of scenery? USBP is hiring immediately for full-time, career positions, where your prior law enforcement officer (LEO) experience may qualify you for higher-graded Border Patrol Agent (BPA) opportunities. Continue making a difference with the nation's premier federal agency charged with securing our borders and protecting our country. Whether you gained this experience as part of a military police unit or as a member of a state or local law enforcement organization, you have an opportunity to work with highly trained professionals whose camaraderie, pride, and purpose are hallmarks of their daily mission. Check out the duties and responsibilities section below, along with the qualifications section to see if you are eligible. Now is the time to make your move, along with excellent base pay, location pay, exceptional benefits, and job stability, USBP is offering up to $60,000 in additional incentives to newly appointed Agents (see details below). DON’T FORGET TO CHECK OUT THE INCENTIVES – SEE SALARY SECTION BELOW IMPORTANT NOTICE: Duty assignments available at the time of offer may include the Southwest Border, including prioritized locations. U.S. Border Patrol determines duty assignments at the time of offer based on operational needs, which may or may not align with candidates’ first-choice preferences. Relocation may be required. U.S. Customs and Border Protection (CBP) is hiring immediately for these full-time, career Law Enforcement Officer (LEO) opportunities. Salary and Benefits: Salary for newly appointed law enforcement Border Patrol Agents varies from: • Base Salary: GL-9/GS-11, $65,545 - $124,717per year, • Locality Pay: Varies by duty location. All Border Patrol Agents may select from an array of federal employment benefits that include health and insurance plans, a generous annual and sick leave program, and participation in the Thrift Savings Plan, a retirement plan that is similar to traditional and ROTH 401(k) offerings. Newly appointed Border Patrol Agents (as defined in 5 CFR 575.102) will be offered up to a $20,000 incentive. The first $10,000 will be paid upon successful completion of the Border Patrol Academy, with the remaining $10,000 awarded for accepting a prioritized location. Prioritized locations include Sierra Blanca, TX; Presidio, TX; Sanderson, TX; Comstock, TX; Lordsburg, NM; Freer, TX; Hebbronville, TX; Ajo, AZ. Newly appointed Border Patrol Agents may also qualify for up to $40,000 in additional incentives distributed over their first four years. Duty Locations: You will be asked to select your preferred location for one of the following mission critical locations: • Big Bend Sector Stations - *Presidio, Van Horn, *Sanderson, Alpine, *Sierra Blanca, Marfa, • Buffalo Sector Stations - Wellesley Island, • Del Rio Sector Stations - Del Rio, Brackettville, *Comstock, Eagle Pass North, Eagle Pass South, Carrizo Springs, Uvalde, • El Paso Sector Stations - Alamogordo, Clint, Deming, El Paso, Fort Hancock, Las Cruces, *Lordsburg, Santa Teresa, Ysleta, • El Centro Sector Stations - El Centro, Indio, Calexico, • Grand Forks Sector Stations - Pembina, • Havre Sector Stations - Havre, Malta, Plentywood, Scobey, Sweetgrass, • Houlton Sector Stations - Calais, Fort Fairfield, Jackman, Rangeley, Van Buren, • Laredo Sector Stations - Laredo South, Cotulla, *Hebbronville, Laredo West, *Freer, Laredo North, Zapata, • Rio Grande Valley Sector Stations - Rio Grande City, Fort Brown, McAllen, Brownsville, Falfurrias, Weslaco, Kingsville, Harlingen, • San Diego Sector Stations - Boulevard, Brownfield, Campo, Chula Vista, Imperial Beach, Murrieta, San Clemente, • Spokane Sector Stations - Colville, Curlew, Metaline Falls, Oroville, • Swanton Sector Stations - Beecher Falls, Burke, Champlain, Newport, Richford, • Tucson Sector Stations - *Ajo, Tucson, Nogales, Douglas, Brian A Terry, Sonoita, Casa Grande, Three Points Substation, Willcox As a BPA, you will be part of our 60,000+ workforce that strives to protect the American people by safeguarding our borders, deterring illicit activity, and enhancing the nation’s economic prosperity. Being a BPA makes you a valuable member of the Federal Law Enforcement Officer (LEO) profession. Typical assignments include: • Detecting and questioning people suspected of violating immigration and customs laws and inspecting documents and possessions to determine citizenship or violations., • Preventing and apprehending aliens and smugglers of aliens at or near the borders by maintaining surveillance from covert positions to include using infrared scopes during night operations., • Interpreting and following tracks, marks, and other physical evidence of illegal entry of persons or contraband., • Performing farm checks, building checks, traffic checks, city patrols, and transportation checks. GL-9: You qualify for the GL-9 grade level if you possess one (1) year of specialized experience, equivalent to at least the next lower grade level, performing duties such as: • Performing physical searches of detained individuals, their vehicles, and their immediate surroundings for weapons, contraband, currency, and other evidence., • Apprehending, physically restraining, or working with law enforcement officials to identify or apprehend violators of state, federal, or immigration laws. GS-11: You qualify for the GS-11 grade level if you possess one year of specialized experience equivalent to at least the next lower grade level, with the authority granted by the state or government to enforce laws, make arrests, and investigate crimes, performing primary duties in an official law enforcement capacity such as: • Utilizing intelligence information to track illegal operations, criminal activity, threats to our nation, and/or contraband while serving as a state, federal, or military law enforcement official., • Leading investigations of fraud, contraband, criminal activity, threats to our nation, and/or illegal operations to determine sources and patterns while serving as a state, federal, or military law enforcement official. There are no education substitutions for the GL-9 or GS-11 grade-level Border Patrol Agent opportunities. Other Requirements: Citizenship: You must be a U.S. Citizen to apply for this position. Residency: You must have had primary U.S. residency (including protectorates as declared under international law) for at least three of the last five years. Age Restriction: In accordance with Public Law 100-238, this position is covered under law enforcement retirement provisions. Candidates must be referred for selection to the Border Patrol Agent position before reaching their 40th birthday in accordance with Department of Homeland Security Directive 251-03. The age restriction may not apply if you are currently serving or have previously served in a federal civilian law enforcement (non-military) position covered by Title 5 U.S.C. 8336(c) or Title 5 U.S.C. 8412(d). Veterans’ Preference: You may also be eligible for an excepted service Veterans’ Recruitment Appointment (VRA). The age restriction does not apply if you are Veterans' Preference eligible. Formal Training: After you are hired, you will be detailed to the U.S. Border Patrol Academy in Artesia, New Mexico, for approximately six (6) months of intensive instruction in immigration and nationality laws, law enforcement, and USBP-specific operations, driver training, physical techniques, firearms, and other courses. Border Patrol work requires the ability to speak and read Spanish, as well as English. Border Patrol Agents will be provided training to become proficient in the Spanish language at the Academy. How to Apply: Click the Apply button on this site. You will be linked to the CBP Talent Network registration page. For Position of Interest, select Border Patrol Agent, and then complete the pre-screening questions. You’ll then receive a link(s) to the BPA Job Opening Announcements (JOAs) on USAJOBS, the federal government’s official employment site, to complete your application. Be certain to review ALL details of the job opportunity announcement and follow all instructions in the application process, including items (resume, transcripts, etc.) to submit. You will be evaluated based on your resume, supporting documents, and the BPA Entrance Exam. If you have questions about the application process, contact a recruiter through the U.S. Border Patrol page: careers.cbp.gov/s/usbp. NOTE: As a subscriber to the CBP Talent Network, you’ll receive monthly emails with information about webinars, career expos, and future opportunities with CBP.

Interview: Video Visa: Us Citizen Or Green Card Holder.Location: Houston, TX (first choice) or Dallas TX Need Locals Only Here Onsite Job.Salary Upon Converting: $115k - $135k (It Can Go Higher Depending On The Senior Level).Description: Need To Be Us Citizen Or Green Card Holder Only Please Com S

Business Analyst With People Soft. Salary + Benefits US Citizen, Green Card and GC EAD preferred. Skills and Experience: 8+ years of related experience in Finance and Accounting Management / Business.

Date Posted: 2026-02-16 Country: United States of America Location: US-AZ-TUCSON-801 ~ 1151 E Hermans Rd ~ BLDG 801 (External Site) Position Role Type: Onsite U.S. Citizen, U.S. Person, or Immigration Status Requirements: Active and transferable U.S. government issued security clearance is required prior to start date. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance Security Clearance Type: DoD Clearance: Secret Security Clearance Status: Ability to obtain INTERIM U.S. government issued security clearance is required prior to start date At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world. The Raytheon Industry 4.0 – Connected Factory Intelligence & Automation (CFIA) organization has an immediate career-growth opportunity for an enthusiastic, highly motivated, and innovative Automation Systems Engineer (ASE) to join our team. As an Automation Systems Engineering team member, you will be responsible for the design, development, implementation, and sustainment of automation solutions in support of manufacturing. The role includes developing and improving physical automation solutions (robots, PLCs, HMIs, and vision systems) and their integration with business systems (primarily using Ignition). This role merges technical, manufacturing, and business knowledge to drive new innovations across Raytheon. The role has a foundation in controls programming but offers significant opportunities for growth through applications development, technical leadership, and coordination across functions to execute initiatives. The candidate will work in a highly collaborative team of engineers and leaders. What You Will Do • Identify opportunities for automation (assembly, inspection, test, and logistics)., • Document requirements through collaboration with factory/program stakeholders., • Provide technical leadership to projects executed internally or in collaboration with suppliers., • Integrate software (PLCs, robotics, vision system, smart tools, etc) and hardware (sensors, actuators, servos, etc) to create or upgrade solutions., • Perform system validation testing for acceptance and production prove-in, • Provide troubleshooting and debug support for production systems., • Contribute to the overall manufacturing technology strategy for the business. Qualifications You Must Have • Typically requires a degree in Science, Technology, Engineering or Mathematics (STEM) and a minimum of 5 years of prior relevant experience unless prohibited by local laws/regulations., • Experience with automation mechanisms, sensors, controls, robotics, and/or vision systems, • Experience in PLC and HMI programming (Rockwell preferred), • The ability to obtain and maintain a U.S. government issued Secret security clearance is required prior to start( active or interim) . U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance Qualifications We Prefer • Fanuc Robotics experience, • Ability to manage and execute small to medium scale automation projects, • Keyence, Cognex, or iRVision experience, • Software programming (Ignition platform, Python, MSSQL), • Experience in control system design and documentation (AutoCAD Electrical), • Strong knowledge of manufacturing or process automation, • Active DoD Secret Clearance What We Offer • Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation., • Relocation assistance is not available for this position. Learn More & Apply Now! Please consider the following role type definition as you apply for this role. ONSITE: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products. As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote. The salary range for this role is 86,800 USD - 165,200 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate’s work experience, location, education/training, and key skills. Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement. Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company’s performance. This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply. RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act. Privacy Policy and Terms: Click on this ___ to read the Policy and Terms

NO EXPERIENCE REQUIRED – PAID TRAINING PROVIDED – JOB SECURITY The Postal Service is the largest government related agency in terms of employees. The Postal Service currently employs nearly 1 million people and is hiring nationwide. There is NO experience required, paid training is provided for all job openings. There are MANY different positions available. The job openings range in starting salary from $26.47 to $43.62/hour, $72,400/year average pay with full benefits. Benefits include medical and dental insurance, paid vacations, paid sick leave, 10 paid holidays, life insurance, and a retirement plan. Postal Service employment also includes career advancement, good working conditions, and GREAT job security. The Postal Service is the largest government related agency in terms of employees, currently employing nearly 1 million people. There are retail locations, mail distribution centers and Postal hubs within the Postal Service's operations. The Postal Service is currently hiring and there are MANY different positions available. The Postal Service has excellent and challenging employment opportunities. Postal Service employment includes great pay, good working conditions, career advancement, and job security that can lead to a lifetime career. To qualify for employment, you must be 18 years of age or older, have a high school diploma or a GED (NO college required) and be a U.S. citizen (or have a Green card). Postal Service operations are wide ranging from Mail Processing, handling and sorting mail to sales and marketing teams that work with commercial customers. Postal facilities process a large volume of mail. Mail Processor is one of the most important jobs of the Postal Service. Mail Processors sort mail and handle the mail, so that it can be moved to the next destination. There are specific individuals that are responsible for shipping and receiving mail. The Postal Service currently employs nearly 1 Million people. There are many employment opportunities with the Postal Service from entry level to management. Certain career fields exist in most or all of its departments. Fields such as Mail Processor, administrative, general office, accountant, administrative assistant, auditor, bookkeeper, office assistant, secretary, staff assistant, typist, etc. To allow a better understanding of the Postal Service Mail Processor position, the following is a brief description.

NO EXPERIENCE REQUIRED – PAID TRAINING PROVIDED – JOB SECURITY The Postal Service is the largest government related agency in terms of employees. The Postal Service currently employs nearly 1 million people and is hiring nationwide. There is NO experience required, paid training is provided for all job openings. There are MANY different positions available. The job openings range in starting salary from $26.47 to $43.62/hour, $72,400/year average pay with full benefits. Benefits include medical and dental insurance, paid vacations, paid sick leave, 10 paid holidays, life insurance, and a retirement plan. Postal Service employment also includes career advancement, good working conditions, and GREAT job security. The Postal Service is the largest government related agency in terms of employees, currently employing nearly 1 million people. There are retail locations, mail distribution centers and Postal hubs within the Postal Service's operations. The Postal Service is currently hiring and there are MANY different positions available. The Postal Service has excellent and challenging employment opportunities. Postal Service employment includes great pay, good working conditions, career advancement, and job security that can lead to a lifetime career. To qualify for employment, you must be 18 years of age or older, have a high school diploma or a GED (NO college required) and be a U.S. citizen (or have a Green card). Postal Service operations are wide ranging from Mail Processing, handling and sorting mail to sales and marketing teams that work with commercial customers. Postal facilities process a large volume of mail. Mail Processor is one of the most important jobs of the Postal Service. Mail Processors sort mail and handle the mail, so that it can be moved to the next destination. There are specific individuals that are responsible for shipping and receiving mail. The Postal Service currently employs nearly 1 Million people. There are many employment opportunities with the Postal Service from entry level to management. Certain career fields exist in most or all of its departments. Fields such as Mail Processor, administrative, general office, accountant, administrative assistant, auditor, bookkeeper, office assistant, secretary, staff assistant, typist, etc. To allow a better understanding of the Postal Service Mail Processor position, the following is a brief description.