Offres Construction & Trades à Chandler, Arizona - Page 10Créer des alertes d'emploi

Job Description Staff Experts, LLC is a highly specialized full-service Staffing & Recruiting Firm. We specialize in staffing in the areas of Engineering, Construction Management, Manufacturing, Information Technology, Aerospace & Defense, Administrative-Accounting-Finance, Call Center Operations, Life Sciences, Healthcare, Skilled Trades and Logistics. Staff Experts is currently seeking to fill permanent Industrial Electrician positions. If you are interested, please email us your resume and call 602-666-6500 to schedule an interview appointment. Qualifications: Highly skilled workers in the Electrical/Instrumentation craft who perform at or above a Journeyman level including but not limited to removal, repair and installation of electrical components, electrical systems analysis and diagnosis, advanced troubleshooting and systems/process optimization. Employees may mentor or train other electrical employees. Employee will work under minimal supervision where the primary objective is safe production. • Removal, repair and installation of electrical components, electrical systems, analysis and diagnosis, advanced troubleshooting and systems/process optimization; may mentor or train other electrical workers, • Safe completion of routine and non-routine repairs and construction, • Perform preventative maintenance including installation, repair and troubleshooting of industrial electrical and/or instrumentation equipment (i.e. substations, power distribution systems, switchgear motors, motor controls, systems and components, process controls, instrumentation and pneumatic equipment), • Must have strong knowledge in the maintenance and troubleshooting of AC/DC drives, PLCs, overhead cranes, management control systems, calibration of field transmitters/transducers and weigh scales, and low and medium voltage equipment, • Ability to perform installations and renovations compliant with regulatory agency standards, • Follow Standard Operating Procedures (SOP) and work area instructions, participate in safety and environmental activities, and use plant and equipment correctly at all times, • Completion of an approved Certified Electronics, Electrical and/or Instrumentation Program, OR, • Minimum of four (4) years of experience in Industrial Electrical and/or Instrumentation repair and maintenance, OR, • Associate's degree or Trade School Certification in a related field and two (2) years of experience in Industrial Electrical and/or Instrumentation repair and maintenance, • Experience in troubleshooting, maintenance and repair of electrical circuits and connected equipment; this includes the ability to read, understand and apply information from technical manuals, prints, and schematics for trouble shooting and repair, • Effective written and verbal communication skills to satisfy training, safety, and electronic message transmission policies of the company, • High School diploma or GED, • Experience with VFDs, PLC, HMI, and/or SCADA Control Systems, • Experience working with low and medium voltages, • Experience with AC and/or DC controls, • Experience with instrumentation devices, • Experience with diagnostic electrical test equipment Contact Information: Staff Experts, LLC (Phoenix Branch) 7776 S. Pointe Parkway West, Suite 148 Phoenix, AZ 85044 602-666-6500 Office 602-391-2369 Fax

Job Description Together We Build – Partnership, Innovation, Excellence, and Safety at Kelso Industries and Icon Electric We're not just offering a job, we're inviting you to be part of a team built on PARTNERSHIP, INNOVATION, EXCELLENCE, and SAFETY. • PARTNERSHIP means we work together with trust, loyalty, and an owner mindset, always striving for win-win outcomes., • INNOVATION drives us to think differently and create real value in everything we do., • EXCELLENCE pushes us to set high expectations and deliver exceptional results. The Kelso Industries company is comprised of 26 (and growing) market-leading operating companies with over 2,600 employees that deliver unmatched HVAC, mechanical, refrigeration, plumbing, and electrical solutions. We are actively building the nation's preferred technical service partnership for commercial MEP+ ecosystems, empowering industrial, commercial, and institutional clients—including Fortune 500 companies and other industry leaders across the United States—with reliable, innovative service. Learn more about us at Please note: We do not use agencies or third-party recruiters and do not accept unsolicited resumes from them. About Us Icon Electric is the 15th largest electrical contractor in the Greater Phoenix area. We are known for delivering iconic performance with a team of high-performing professionals driven to succeed. We specialize in streamlining electrical system installations through innovation, precision, and a relentless commitment to quality and safety. From pre-construction planning to final execution, our team leads with communication, collaboration, and a results-driven mindset that keeps projects on time and on budget. About the Role Icon Electric is hiring an experienced Senior Electrical Estimator to prepare cost estimates for electrical construction projects. This role involves working closely with contractors, vendors, and stakeholders to ensure accurate project pricing. What You'll Do • Estimate costs for electrical construction projects ($10,000 to $5 million), • Provide preliminary pricing based on discussions and available site conditions, • Assist in designing projects that are not fully developed, • Identify value engineering opportunities to optimize costs, • Account for hidden costs (engineering, testing, commissioning, etc.), • Consult with clients, vendors, and internal teams to refine estimates, • Attend job site walk-throughs to assess field conditions, • Request and analyze material and equipment quotes, • Prepare detailed bid documents with scope letters and labor estimates, • Convert preliminary budgets into finalized pricing, • Participate in sales efforts and client meetings, • Maintain strong relationships with vendors, clients, and contractors, • Keep project stakeholders updated on bid progress, • High school diploma or GED equivalent, • Electrical apprenticeship or bachelor's in Construction Management preferred, but not required, • 5+ years of electrical estimating experience in the commercial and/or industrial space, • Proficiency in Accubid, Word, Excel, Outlook, Bluebeam, • Stable work history (4-6 years per previous company), • Strong understanding of labor factoring and takeoff strategies, • Ability to supervise and lead an estimating team, • $120,000 to $140,000 base salary depending on experience, • Sign-on bonus, • Performance and retention bonus potential, • Company pays for Cobra for up to 90 days, • Generous PTO, • Relocation assistance if moving from out of state, • Comprehensive insurance benefits Why Join Us? We're committed to attracting talented individuals who seek a company with a strong foundation of success and an outstanding culture. We proactively provide competitive compensation, comprehensive benefits, and clear pathways for career advancement with autonomy and flexibility in an entrepreneurial environment. Learn more about us at We celebrate diversity and are committed to creating an inclusive environment for all employees. We do not discriminate in any aspect of employment on the basis of race, color, religion, national origin, ancestry, gender, sexual orientation, gender identity and/or expression, age, veteran status, disability, or any other characteristic protected by federal, state, or local employment discrimination laws where Kelso does business.

Job Description Staff Experts, LLC is a highly specialized full-service Staffing & Recruiting Firm. We specialize in staffing in the areas of Engineering, Construction Management, Manufacturing, Information Technology, Aerospace & Defense, Administrative-Accounting-Finance, Call Center Operations, Life Sciences, Healthcare, Skilled Trades and Logistics. Staff Experts, LLC is currently seeking to fill Industrial Service Electrician positions. If you are interested, please email us your resume and call 602-666-6500 to schedule an interview appointment. Job Duties: • Removal, repair and installation of electrical components, electrical systems, analysis and diagnosis, advanced troubleshooting and systems/process optimization; may mentor or train other electrical workers, • Safe completion of routine and non-routine repairs and construction, • Perform preventative maintenance including installation, repair and troubleshooting of industrial electrical and/or instrumentation equipment (i.e. substations, power distribution systems, switchgear motors, motor controls, systems and components, process controls, instrumentation and pneumatic equipment), • Completion of an approved Certified Electronics, Electrical and/or Instrumentation Program, OR, • Minimum of four (4) years of experience in Industrial Electrical and/or Instrumentation repair and maintenance, OR, • Associate's degree or Trade School Certification in a related field and two (2) years of experience in Industrial Electrical and/or Instrumentation repair and maintenance, • Experience in troubleshooting, maintenance and repair of electrical circuits and connected equipment; this includes the ability to read, understand and apply information from technical manuals, prints, and schematics for trouble shooting and repair, • High School diploma or GED, • Experience with VFDs, PLC, HMI, and/or SCADA Control Systems, • Experience working with low and medium voltages, • Experience with AC and/or DC controls, • Experience with instrumentation devices, • Experience with diagnostic electrical test equipment Staff Experts, LLC is an Equal Opportunity Employer. Contact Information: Staff Experts, LLC (Phoenix Branch) 7776 S. Pointe Parkway West, Suite 148 Phoenix, AZ 85044 602-666-6500 Office 602-391-2369 Fax

Job DescriptionJob Title: Medium Voltage Technician it's what's inside that counts There’s more to CMC than our products and the buildings, structures, and roads they go into. At CMC, it’s the people inside our recycling centers, fabrication plants, manufacturing facilities, steel mills and offices that make us who we are as a company. Our success comes from finding, retaining, and supporting the highest quality talent by offering: • Day 1 Benefits Coverage with low cost Medical, Vision, Dental, • Day 1 Paid-time Off and Vacation, • 4.5% Company Match 401(k) plan, • $500 Annual Company-paid Lifestyle Benefit, • Competitive Compensation and Bonuses, • Company-paid Life and Disability Insurance, • Employee Stock Purchase Plan, • Ability to troubleshoot all aspects of Medium/High Voltage equipment for an industrial steel production facility, • Lead facility’s annual testing and inspection requirements, • Diagnose and remedy complex problems related to incoming power irregularities and substation problems, • Diagnose and remedy complex problems related to transformer protection Relays, complex faults and trips in all protective, • Assist in developing other team member’s skills and knowledge, • Serve as Shift Supervisor in his/her absence and provide supervisory support, as necessary, • Install, monitor, inspect, troubleshoot, and ensure reliability of all electrical, electronic control systems and components, process equipment, and AC/DC utilities, • Perform troubleshooting and repair or replacement of defective and damaged parts, • Learn and maintain the variety of electromechanical starters and motors using sophisticated electronic interface boards, VFDs, PLCs, HMIs, instrumentation, and controllers, • Procure supplies and spare parts to ensure effective and timely maintenance of equipment, • Maintain and revise instruction manuals, drawings, schematics, maintenance logs, and other documentation, as required, • Performs other duties as assignedWhat You'll Need, • Minimum 2 years electrical maintenance experience preferred, • CMMS experience preferred, • PLC troubleshooting experience preferred, • Required to know and understand Grounding systems and Maintenance, • Must understand and demonstrate abilities in the following; Electrical and Mechanical Maintenance, Hydraulics and Pneumatics and Arc Flash Safety, • Must understand and demonstrate abilities in the following; Predictive Maintenance Technology, Furnace Grounding Systems and Testing, Induced Harmonics and related mitigation technology, • Experience with Electrical relay control maintenance and repair proficiency, especially for cranes, • Extensive experience in maintenance of electrical control and distribution systems and analog and digital circuits, • Extensive experience in maintenance of relay and ladder logic, industrial communications networks, instrumentation and automation control systems, • Experience or formal education and lab training on PLCs, or the ability to navigate block logic, ladder logic, or other digital logic interfaces, • Experience with MRO system, SAP system preferred, • Experience in manufacturing equipment processes and working knowledge of associated controls, • Training and/or experience in instrument and sensor calibration, • Knowledge of hydraulic and pneumatic circuit components, • Competent in the use of hand tools as well as electrical and electronic test equipment, • Experience in a heavy industrial environment is preferred, but not required, • Experience with industrial electrical repairs including troubleshooting and repair of electrical valves and switches, • Experience with industrial electrical repairs including troubleshooting and repair of A/C - D/C drives and motors, PLC's and 480 Volt 3 phase electrical, • Possess specific knowledge of both hydraulic and electrical systems and equipment, • Must be able to read technical documents and manuals and write job instructional training documents, • Must be able to work effectively with others by sharing ideas in a constructive, positive manner, • Must practice safe working habits and follow OSHA, EPA, and company safety policies, rules, and regulations, • Must be able to push and pull up to 90 lbs, carry 50 lbs, and climb ladders and steps, • Must be able to work overtime and cross train as required, • Must be able to work outside under all weather conditions, including extreme heat and cold temperaturesYour Education, • High School Diploma or GED required If you’re ready to join a team working to make our industry more sustainable, support the bridges, roadways, buildings and infrastructure that connects our communities, and do meaningful work, you’re ready to join CMC. Apply today and start moving your career — and our world — forward. Let's build a better world! CMC is committed to providing equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, age, physical or mental disability, national origin, citizenship, military or veteran status, sexual orientation, gender identity and/or expression, genetic information, or other status protected by federal, state or local law. You should be proficient in: • 120/208/240/480 Voltage Systems, • Commercial Electrical Expertise, • Electrical Troubleshooting, • Programmable Logic Controller (PLC) (Siemens)

Job DescriptionKHI MEDICAL Traveling Construction Foreman Summary KHI Medical is a growing medical construction company specializing in renovating operating rooms and installing surgical equipment nationwide. Our team is growing due to the principles of quality service, integrity, transparency, and hard work focused on superior customer satisfaction. We are looking for a construction foreman who is willing and able to manage while working with the crew and small renovation teams. Candidates are expected to have a construction background and familiarity with electrical work, structural steelwork, and reading blueprints. Job Purpose KHI Construction Formans are vital to success by being the face of the company while keeping workers, sub-contractors, material deliveries, and on-site activities on schedule. KHI Construction Formans are expected to work with and lead their small team of professionals on jobs ranging from equipment installation (surgical booms, lights, and computers) to complete Operating Room demos/renovations. Foremen must effectively plan, communicate, execute, and debrief on all projects to achieve consistency. As the face of KHIM, the foreman must also be comfortable in front of the client and accomplish administrative requirements and communications. These traits build client trust and facilitate repeat business. Key Attributes of a KHI Construction Foreman KHI construction foremen must be construction experts for a team of medical equipment technicians, network specialists, and sub-contractors. They must be able to facilitate success from their workers, establish a high standard of quality, and hold everyone accountable while cultivating a sense of teamwork and accomplishment. Specifically, this includes: • Experience in and knowledge of the construction industry., • Must be able to read blueprints and drawings., • Understand building code basics for electrical, fire suppression, medical gas, etc, • Preparation and planning before an event to facilitate efficiency while on the client's site., • Communicating the plan of action with team members and clients before work., • Manage change in accordance with KHI priorities (client, efficiency, and safety)., • Provide clients with consistent updates in person, via email, and online., • High School diploma, College degree preferredKnowledge, skills, and abilities, • Three years in leadership role desired, • Ability to travel out of town 80% or more of the time, • Ability to work alongside the team in installing equipment, • Familiarity with hand and power tools, • Knowledge of plumbing, electrical, mechanical, and low-voltage systems, • Ability to read plans, decipher instructions and follow the scope of work, • Ability to assess changes in the scope of a job and appropriately request a change order, • Construction Foremans may be required to work evenings and weekends to meet project milestones(Nationwide), • Ability to work in a crouched or kneeling position and confined spaces, • Ability to lift 70 poundsProficiency in the use of computers for:, • Google Drive, • Use of Google Calendar, • Word processing, • Spreadsheets, • E-mail, • InternetCompensation:, • Starting salary of $60k-$85k based on experience., • Benefits include Medical and 401K retirement plan.

Job DescriptionSummary: Our mission is to make communities SHINE! Our team provides excellent service to our clients, all while nurturing communities, acting with integrity, and hustling to get the job done. A reliable JR HVAC Technician you will assist in the installation, maintenance, and repair of heating, ventilation, and air conditioning systems under the supervision of a senior technician. This is an excellent opportunity to gain hands-on experience and grow within the HVAC industry. Essential Duties & Responsibilities: • Installing, maintaining and repairing ventilation and air conditioning systems and equipment., • Basic understanding of HVAC systems, Refrigeration, Low Temp, Ice machines and components., • Support senior technicians with inspections, diagnostics, and troubleshooting HVAC issues., • Identifying maintenance risks on equipment., • Perform routine maintenance tasks such as filter changes, system cleaning, and testing., • Diagnosing electrical and mechanical faults for HVAC systems., • Cleaning, adjusting and repairing systems, and performing warranty services., • Performing emergency repairs promptly and efficiently., • Ensuring compliance with appliance standards and with Occupational Health and Safety Act., • Complying with service standards, work instructions and customers' requirements., • Assisting with customers' queries., • Ability to climb ladders, ascend. Descend stairs and navigate various areas throughout the property. Supervisory Responsibilities: This position has no supervisory responsibilities This position has supervisory responsibilities Competencies: • Completion of or current enrollment in an HVAC training program preferred, and willingness to continue education in HVAC field., • Valid driver’s license., • Basic understanding of HVAC systems and components., • Strong mechanical aptitude and willingness to learn., • Working knowledge of boiler systems., • Proficient in balancing air and water treatment systems in line with HVAC protocols., • Excellent written, verbal and interpersonal skills., • Ability to work after hours, over weekends and on public holidays with short or no notice., • Ability to work in confined spaces. Education and Experience: Education: High school diploma or equivalent work experience in a similar environment. Experience: • Must have experience in maintenance, repairs and replacement, • Must have experience with HVAC, Refrigeration and Low temp;, • Commercial single phase and 3 phase units up to minimum of 20 tons Preferred: • EPA 608 Certification (or willingness to obtain), • Basic computer skills. Experience in Excel, Word, and Outlook preferred. Physical Requirements and Work Content: Americans with Disability Specifications: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is required to stand, move, operate with hands and arms, and lift up to 50 pounds at times. The employee is regularly required to use hands to operate or feel objects, tools or controls, communicate, distinguish or identify, adjust or focus. Work Environment: Work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Additional Comments: These declarations are not to be an “all-inclusive” list of the duties and responsibilities nor of the skills and abilities required to do the job. They are intended only to describe the general nature of the job and a reasonable representation of its activities. Additional essential functions and/or tasks may be identified by the company and listed as such in the incumbent’s performance appraisal. Various tasks may be assigned under each task or function. The incumbent performs other job-related duties as assigned and required. This document does not create an employment contract, implied or otherwise, other than an “at-will” employment relationship. EOE/Minority/Female/Disabled/Veteran

Job Description Job description: Install and repair electrical & mechanical systems, assemblies, and electrical and electronic components of industrial machinery and equipment. Follow and interpret NEC (NFPA 70), OSHA, MSHA or applicable local electrical codes, manuals, schematic diagrams, blueprints, and other specifications, using hand tools, power tools, and electrical and electronic test equipment. Formal Requirements and Certifications of Job – Required • 6 years’ experience in the electrical field, • Knowledge of shop mechanics and mechanical and electrical operations of equipment, • Ability to troubleshoot, identify and correct problems, • Good verbal and written communication, • Team player with focus on safety and quality, • Computer literate with knowledge of Microsoft applications, PLC and related programing, etc., • Ability to prioritize, organize and multi-task daily, • MSHA (Mine, Safety, Health Administration) Electrical Certification or able to obtain, • Journeyman level electrician Special Demands “Equal Opportunity Employer: all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.”

Job DescriptionSalary: DOE If your core values align with the following, TEPCON Construction Inc. is the place for you to work: Respect, Teamwork, Safety, Family Orientated, Purpose Driven, Fun Loving Job Description TEPCON Construction, Inc. has a reputation for building relationships and providing outstanding leadership and expertise in the field. We look for employees who use their skills and talent to meet the demands that present themselves on a daily basis. Hiring quality individuals with active involvement, creativity and integrity, ensures TEPCON will continue to achieve its goals. We are actively seeking a qualified Facilities Electrician to join our team. Primary Objective:Safe and timely performance of any electrical tasks; assisting Superintendent/Project Manager with any other tasks assigned. Primary Responsibilities: • Maintain a clean, organized service van, • Restock materials in service van on a routine basis, • Comply with current NEC Standards, • Organize, plan and prioritize workload, • Clear, concise communication with all parties involved with the construction project, • Maintain daily logs, along with records of time and materials utilized on each project, • Ability to perform job walks and assist with estimating and plan take offs, • Utilization of company computer tracking software for attendance, timecard entry and change order tracking, • Supervise and expedite material orders, • Review plans, specifications and notes, • Provide Supervisor with accurate start and completion timelines, • Resolve conflicts and negotiate well with others, • Complete other responsibilities as assigned Goals to Measure Performance: • Integrate Core Values: Respect, Teamwork, Safety, • Demonstrate proficiency and understanding of current NEC Standards, • Perform with a strong sense of urgency and follow through, • Adhere to project schedules and estimated budgets resulting in on-time project completion and project profitability, • Monitor and follow all safety policies and procedures, • Create an environment where safety first is the culture and all trades people work with an incident and injury free attitude, • Exhibit positive project team attitude, • Effectively communicate with clients, vendors and co-workers, • Improve professional growth and industry knowledge Education, Skills and Experience: • Minimum 5 years journeyman electrician experience required, • Experienced in working within occupied environments and high rise, or multi-tenant buildings, • OSHA 10 Certification preferred, • Must have AZ Drivers License and clean MVR Compensation: Medical, Dental, Vision eligibility after 60 days This job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee. Other duties, responsibilities and activities may change or be assigned at any time with or without notice as the needs of the team or company change. This position maintains a Safety-Sensitive designation as a condition of employment. Job Type: Full-time Salary: $26.00 to $32.00 /hour

Job DescriptionBenefits: • 401(k), • Bonus based on performance, • Company car, • Free uniforms, • Opportunity for advancement, • Flexible Scheduling, • Competitive Compensation You have past experience in an HVAC service technician role and hold an EPA certification. A team player who is comfortable working independently, you love the feeling of a job well done and take pride in completing customer jobs with efficiency. A positive attitude is a must! Responsibilities: • Repair or service heating, ventilating, and air conditioning (HVAC) systems to improve efficiency, such as by changing filters, cleaning ducts, or refilling non-toxic refrigerants, • Establish customer rapport to ensure the highest levels of satisfaction, • Test pipe or tubing joints or connections for leaks, using a pressure gauge or soap-and-water solution, • Test electrical circuits or components for continuity, using electrical test equipment, • Repair or replace defective equipment, components, or wiringQualifications:, • Past experience as an HVAC service technician or comparable education, • Valid Drivers License, • EPA Certification, • Experience with operation and maintenance of chillers, heat pumps, air handlers, and geothermal systems, • Ability to climb ladders, crawl, and lift 40 pounds

Job DescriptionDescription: William Ryan Homes is seeking an experienced, highly motivated Production Manager/Director of Construction to lead the Phoenix Construction and Warranty TEAMS in the building of high-quality homes. This person’s responsibilities include but are not limited to: • Assume responsibility for all work of the Production and Warranty departments. Recruit, train, supervise, and motivate department staff and subcontractors continuously improving the team., • Maintaining high standards of quality and customer service throughout the building process., • Facilitate weekly Production meetings, setting team goals and process invoices and purchase orders., • Participate in weekly Division meetings as an active member of the division management team, providing insight to the team on improving start cycle times, building cycle times & customer satisfaction., • Developing a thorough understanding of all processes, plans options, specifications, costs, takeoffs, and Vendor Scope of Work documents., • Provide direction and support to meet Start Cycle time goals while maintaining and even flow production., • Ensuring that safety guidelines are followed on all job sites; acting as the Division Safety Manager, handle OSHA inquiries and inspections., • A competitive salary with incentives., • Vehicle and Cell Phone Allowance., • Demonstrated leadership skills to manage and develop a high-performance team., • Competent in conflict and crisis management., • Expert knowledge of local trades’ building products, construction details and relevant rules, regulations and quality standards., • Understands of all facets of construction process; ability to read and comprehend detailed construction blueprints, specifications, and detailed development drawings., • Excellent verbal and written communication skills., • Detail-oriented with outstanding organizational, project, and time-management skills., • 10 years of experience in new home Production/Field Supervision., • Minimal travel required; must own or lease a truck and have a valid driver’s license with insurance coverage.

Job Description Laser Technician Esthetician Come join a major aesthetic services company in the Medical Spa Industry with locations across the country where we believe confidence is beautiful. Are you tired of calculating your commission using different percentage points based on products, services, and other confusing breakdowns? We offer the opportunity to work with a team and earn top wages, benefits, and monthly bonus. We use lasers from vendors such as Venus Concepts, Sofwave, Aerolase, and Hydrafacial. All training is provided on site, but an interest to use lasers in the Aesthetic space is required. We do not provide standard facials, all of our treatments involve some type of technology Our Technicians average between $22-32 hourly! This average includes the base hourly pay and the average monthly bonus! We are open Monday-Friday 10:00am-7:00pm, and Saturdays 10:00am-3:00pm. Evening & Saturday Availability required. The position is located at:1652 South Val Vista Drive Building 7 Suite 127 Mesa, Arizona 85204 Opportunity: • Perform aesthetic treatments with state-of-the art equipment, • Ability to work in a team environment with the expectation of advancement, • Generous Monthly Bonus compensation potential, • Medical/Vision/Dental benefits + others available to Full Time employees Qualifications: • You must be a state licensed Esthetician, • You MUST be laser certified, • You must be passionate about the beauty industry and helping people achieve their confidence goals., • You must have great people skills and work well in a busy environment, • You must be a team player!! ***Due to the high volume of applicants, we are unable to respond directly to each candidate Job Posted by ApplicantPro

Job Description Responsibilities: • Maintain safe, clean workspace, • Work in team setting, • Operate machinery, • Move materials and equipment, • Assemble product, • Assemble pallets, • Use hand/power tools, • Package and label orders, • Shipping/Receiving product, • Operate forklift (if experienced) Job Type: Full-time Hours 8am-4pm Monday-Friday, 1/2 hour lunch break (paid) Company provides PAID Life Insurance, Short-Term and Long-Term Disability Insurance, and pays 75% of Health Insurance Premiums Company offers group rates on Dental Insurance, Vision Insurance, additional Life Insurance, and more Rapid growth and pay raise opportunities offered Company DescriptionFinished Edge Technology manufactures stair nosings from vinyl plank, laminate, and engineered wood flooring.Finished Edge Technology manufactures stair nosings from vinyl plank, laminate, and engineered wood flooring.

Job Description Job Summary: Medivant Healthcare is seeking a detail-oriented and reliable Visual Inspector to join our team. The ideal candidate will be responsible for inspecting and ensuring the quality of our medical products and packaging by visually identifying defects or discrepancies. We are considering both experienced professionals and freshers with strong eyesight who can contribute to the high standards of quality our company upholds. Key Responsibilities: • Perform detailed visual inspections of medical devices, products, and packaging to ensure they meet quality and regulatory standards., • Identify defects, damages, or irregularities in materials or finished goods., • Report and document any findings or discrepancies to the Quality Control team., • Ensure that all products are in compliance with safety and quality specifications before being released for shipment., • Maintain a clean and organized work area to ensure efficient operations., • Collaborate with the production team to communicate any quality concerns or potential improvements., • Experience: Prior experience in visual inspection or quality control is preferred but not required. Freshers with a strong ability to identify visual defects and attention to detail are encouraged to apply., • Skills:, • Strong eyesight and ability to spot even minor discrepancies., • Excellent attention to detail and focus on precision., • Ability to work independently and as part of a team., • Good communication skills to report issues clearly., • Familiarity with basic quality control procedures (an advantage)., • Education: High school diploma or equivalent; a background in life sciences or healthcare is a plus.

Job DescriptionWGNSTAR is a dynamic and growing company with a global footprint. Primarily focused on the semiconductor industry, we provide a platform for you to expand your career with knowledge gained on the job, and tailored development. We know we need talented people like you that hold similar values, which is why we do not put limits on learning, development, industry, and personal growth. Start your path to a WGNSTAR career today! Schedule: Compressed Work Week Pay Rate: $24 - $26 Location: Chandler, AZ Position Type: Full Time Benefits: This position is eligible for WGNSTAR’s full benefits package, including Medical, Dental, Vision, and 401(k). Additional benefits are listed at the end of this posting. Principal Duties and Responsibilities: • Work on systems and maintain supply of chemicals and gases to a semiconductor manufacturing environment that makes the chips used in electronic devices such as Smart Phones, LEDs, and Flat Screen TV's., • Operate assigned chemical and/or gas distribution systems., • Perform the handling and change-out of gas, chemical, and slurry containers., • Troubleshooting and preventative/repair maintenance on gas and chemical equipment., • Operate a computer to support job functions.Requirements:, • Must be comfortable with physical activity, including walking up to 5 miles per day and occasionally climbing ladders with fall protection., • Ability to work with chemicals, including using a Supplied Contained Breathing Air Respirator for short periods of time., • Ability to lift up to 40 pounds and perform tasks requiring bending, overhead reaching, and basic physical agility., • Previous experience in a technical or maintenance role, ideally in a manufacturing or semiconductor environment., • Familiarity with chemical or gas handling and distribution systems. Additional Benefits: Paid Vacation, Select Holidays, Overtime Opportunities, On-site Facilities & Career Development Opportunities. This job description is intended to convey information essential to understanding the scope of the job and the general nature and level of work performed by job holders within this job. But this job description is not intended to be an exhaustive list of qualifications, skills, efforts, duties, responsibilities or working conditions associated with the position. The people who thrive most on our teams are those individuals who perform well in a team environment, enjoy interacting and engaging with several different stakeholders, adapt quickly to changing environments, and leverage their skills, quality, and knowledge to drive themselves and their teams towards continuous improvement and success. This position is not eligible for visa sponsorship. All applicants must be legally authorized to work in the United States without the need for current or future sponsorship (e.g., H-1B, O-1, etc). Additionally, WGNSTAR does not participate in the STEM OPT extension program for this role. Equal opportunities and Social Governance WGNSTAR is an Equal Opportunity Employer, drug free workplace, and complies with ADA regulations as applicable. WGNSTAR places an immense emphasis on equal employment, encourages diversity in the workplace, and applies an open-door policy for inclusion of all employees. Our diversity program encourages people from any gender, background, ethnicity, culture, education, and experience to join the company and more importantly build a career through employee development. Through our Global wellness programs, WGNSTAR ensures our employees and families have access to a full range of wellness services through our Employee Assistance Program (EAP). In the communities that surround our business operations, we support individual and group sponsorships for local sports and those that are vulnerable in society. Powered by JazzHR py7ujtRHxf

Job Description Job Title: Appliance Repair Technician (sealed system preferred) Location: Tempe, AZ Job Description: Do you get excited when figuring out how things work? Do you love the challenge of troubleshooting something that’s broken? Would you like to have a part in improving the home life of families in your community? If so, we are looking for you! If you value working with people you actually like, having fun while you work, and protecting your free time, this is the place for you. You’ll enjoy working with our team. Oh, and did we mention no nights or weekends! We’ll also give you the ongoing training that you’ll need. Responsibilities: As an Appliance Repair Technician, you are the key component in providing excellent customer service by providing high-quality maintenance services for our customer’s appliances. Here are your primary responsibilities: • Diagnose and repair home appliances and equipment such as Refrigerators, Ranges, Ovens, Washers, Dryers, Dishwashers, Microwaves, etc..., • Provide cost estimates for repairs., • Effectively communicate with the customer to ensure they understand the services needed., • Order parts and ensure efficient use of company materials., • 2+ years of proven experience as an Appliance Repair Technician or similar role, • Familiarity with schematics and technical manuals, • Strong mechanical knowledge and understanding of electrical systems, • Excellent problem-solving skills and attention to detail, • Ability to work independently, • EPA certification and Sealed System Experience is a big plus, • No nights or weekends: We value having a solid work-life balance. We work to make a living, without being overworked., • Paid Training: We will train you and help you build a career. Our Appliance Academy is designed to take you from Apprentice to Master Technician quickly., • Bonus & Incentives: We reward hard work with generous bonuses and incentive pay., • Company-Provided Perks: We provide you with a company vehicle and iPad., • Benefits: Health, Dental benefits are offered., • PTO: paid time off and holiday pay Apply and join our team today!

Job Description JOB HIGHLIGHT: EverLine Coatings and Services is a premier line painting and maintenance company that proudly has a location in Gilbert, AZ. We provide high quality line striping, crack-filling, sealcoating, potholes repair as well as others garages and warehouses services. If you are eady for growth and opportunity for leadership, EverLine is currently seeking a Pavement Tech to join our Gilbert/Chandler office team. As a Pavement Technicien, you will be responsible for performing works including Seal Coatings. Crack Filling, Line striping etc We work hard, have fun and have an amazing corporate culture. Our teams are DRIVEN, Dedicated, Resourceful, Integrity-Focused, Value-Based, Excelling, and Nourishing. Are you ready to make an impact? RESPONSIBILITIES: * Organize lead and encourage the team to complete daily responsibilities in a safe and timely manner * Fill out digital safety, operation, and other job related reports daily * Communicate effectively between GM, crew, and clients when necessary * Use equipment to perform line painting, asphalt crack filling, and sealcoating, among other pavement maintenance services * Maintain a clean and organized work environment * Drive and back up Truck with a trailer on a hitch * Assist with operations across the company * Use in software for organizing team and competing scheduled jobs * Plan and facilitate the production of a high-quality project * Maintain a safe, hazard-free job site QUALIFICATIONS: * Will be nice to have a minimum of 6 months of working experience in the field or related field. (Seal coating, crack-filling, line striping, pothole repair, asphalt paving) * High school diploma or equivalent * Have a valid Arizona Drivers License and a reliable mode of transportation * Able to work during the Arizona summer heat. * Ability to work in a physically demanding role with lots of walking, bending and lifting (up to 75lbs) * Familiar with small engines (like lawnmowers or paint sprayers) * Able to read and understand work orders * Able to back up trailers into tight spaces * Self-motivated, critical thinker that likes to problem solve * Punctual, organized, and have high attention to detail * Ability to work well independently and unsupervised * Results motivated WHAT WE OFFER: * Competitive wages: $22-$28+ based on experience and qualifications. * Flexible working schedule * A challenging, fun atmosphere with a great team * Training opportunities and advancement within the company Company DescriptionThis job post is for a direct hire. Employees will report directly to Everline coatings and Services.This job post is for a direct hire. Employees will report directly to Everline coatings and Services.

Job Description Welcome to Air Comm, where innovation meets communication! Since 1973, we've been on a mission to revolutionize wireless solutions for clients worldwide. We tailor our services to fit the unique needs of every industry, big or small. We specialize in integrated technologies from cell phone integration, dispatch consoles, intelligent surveillance cameras and more to find the right solution for our customers. With a knack for creativity and a passion for problem-solving, we're not just your average communications provider—we're your trusted partner in navigating the ever-changing landscape of connectivity. Join us as we continue to soar to new heights, making waves in the world of two-way radios. Location Tempe, AZ Employment Type Full-Time, Regular, Non-Exempt Manager Position No Reports To Regional Service Manager or designee Travel 25% Revision Date August 2025 Job Description Seeking a mobile installer that can install electronics into vehicles - A background in GPS, Stereos, Radio, Lights, etc! The Install Tech will assist with the customer installation of radio and wireless communications systems in customer’s vehicles and on-site. Successful candidates will be motivated, customer service oriented and professional in appearance. Applicant should have experience with the following: • Audio Systems, • Mobile Video Systems, • Remote Starters, • Security Systems, • Navigation Systems, • Subwoofers, • Car Speakers, • Marine Electronics and Speakers, • Bluetooth, • Radar, • Motorcycles, • I-pod Integration, • Strobes - LED - HID Lighting, • An ideal candidate will have a minimum of 2+ years of experience with 12 volt automotive systems., • Installation of vehicle lighting, controls, sirens, cameras, electronic locks, and other similar technologies., • Dismantle the interior and exterior of new vehicles (seats, carpeting, flooring, dash and interior panels, headliners, lights to prepare vehicle for installation of new systems., • Install radio communications systems, antennas and GPS equipment into vehicles or mobile command centers., • Vehicle repairs on systems as well as retrofitting and upgrading to refresh existing fleets., • Maintains positive customer relations., • Trains junior installers as needed. Work Environment The job environment may vary, but commonly associated outdoors at construction sites, mine sites, hotels, and hospitals. The following environmental/atmospheric working conditions are commonly, but not always, associated with the performance of this position. The actual working conditions will vary. • Job Site environment, including, but not limited to, machines, tools, heavy equipment, chemicals, solvents, dust and fumes., • Occasional exposure to extreme weather conditions., • Uneven ground. Perks and Benefits Air Comm offers a comprehensive benefits package including medical, dental, vision, a retirement plan, AD&D Insurance options, and more. We also reward our employees’ hard work with bonuses, paid time off, and paid holidays. As an added bonus, we also offer a brand-new facility with a gym and fully stocked coffee bar. The above job description is meant to describe the general nature and level of work being performed; it is not intended to be construed as an exhaustive list of all responsibilities, duties and skills required for the position. Employees will be required to follow any other job-related instructions and to perform other job-related duties requested by their supervisor. All job requirements are subject to possible modification to reasonably accommodate individuals with disabilities. Some requirements may exclude individuals who pose a direct threat or significant risk to the health and safety of themselves or other employees. It is the policy of Air Comm to fill every position without regard to race, color, religious creed, sex, marital status, physical disability, mental disability, medical condition, age 40 and over, national origin, ancestry, sexual orientation, gender identity, genetic information, military or veteran status, or any other basis made unlawful by applicable law. Air Comm is an equal opportunity employer, and strictly prohibits unlawful discrimination by any employee, including managers, supervisors and co-workers. Include shift schedule

Job Description Job Description Are you a skilled Diesel Mechanic looking to pivot and expand your expertise into generator technology, or an experienced Generator Technician seeking a dynamic role? Join our team and be a crucial part of keeping essential power systems running. The Opportunity We're looking for a dedicated Generator Technician to perform essential inspection, repair, and comprehensive preventive and corrective maintenance on various power systems. Your work will primarily focus on Internal Combustion (IC) engines, diesel generators, and other IC gaseous engines. This is an excellent opportunity for an Diesel Mechanic who is eager to learn and receive training in generator systems. What You'll Do • Execute maintenance, modifications, and repairs on IC engines and diesel/gaseous generators., • Ensure a safe worksite with a focus on quality and efficiency., • Manage and maintain accurate paperwork, logs, and records (including using programs like Excel and Word)., • Provide leadership, teaching, and training on proper work and safety procedures to others., • Comply with all company motor vehicle policies and maintain applicable logbooks (e.g., FDOT). What You'll Bring • Experience: At least 2–5 years of relevant industry experience., • Certifications: Job-related certifications are required., • Skills: Strong organizational, computer, and communication skills., • License: A valid Driver's License is required., • Availability: Must be willing to work a flexible schedule, including 12-hour shifts, holidays, overtime, weekends, and on-call rotations., • Travel: Ability to travel extensively and work away from home (out of market) as required by job demands, potentially in extreme weather conditions., • Education: High school diploma or equivalent (preferred). Compensation & Benefits • Job Type: Full-time, • Comprehensive Benefits: Health, Dental, Vision, and Life Insurance., • Retirement: 401(k) plan., • Time Off: Paid time off., • Support: Per diem and lodging provided when traveling., • Equipment: All Personal Protective Equipment (PPE) is provided., • Location: This is not a remote position; significant overnight travel is required.Company DescriptionFounded in 2012, Infinity Communications Group has leveraged a diversified portfolio of experience that began in the mid 80’s. Our experience includes, but is not limited to, erecting new towers, system upgrades, maintenance, power outages, generator support and storage, generator and fleet refueling, and disaster recovery. Infinity provides qualified and experienced professionals and crews with at least 10-15 years of experience. Infinity holds to the belief that customers deserve an immediate response from qualified personnel. As a primary provider of repair and maintenance services for major wireless carriers, Infinity stores, maintains, and deploys emergency generators from our strategically placed facilities around the United States.Founded in 2012, Infinity Communications Group has leveraged a diversified portfolio of experience that began in the mid 80’s. Our experience includes, but is not limited to, erecting new towers, system upgrades, maintenance, power outages, generator support and storage, generator and fleet refueling, and disaster recovery. Infinity provides qualified and experienced professionals and crews with at least 10-15 years of experience.\r\n\r\nInfinity holds to the belief that customers deserve an immediate response from qualified personnel. As a primary provider of repair and maintenance services for major wireless carriers, Infinity stores, maintains, and deploys emergency generators from our strategically placed facilities around the United States.

Job Description We are a rapidly growing Appliance & HVAC company with an immediate need for Technicians. A little about us, We are family owned & family operated, been in the industry for 20yrs. We pride ourselves on being True to our customers. Located in East Mesa but provide Valleywide service. We are looking for another member or 2 to join us! Is this you? Then call us for immediate interview 480-813-TRUE (8783) Requirements; 1yr Appliance Experience as a Service/Repair Technician A+ Able to Troubleshoot, Repair, Maintenance & Install On Time, Good Work Ethic, Independent, Good Workmanship People Person -Communication is Key EPA Certified Residential & Commercial Clean MVR, Pass Background & Drug Test We Offer; Competitive Pay 401K Medical Insurance PTO & Sick Time Paid Major Holidays Tool Account Work Vehicle w/ Gas Card Cell Phone & Tablet Uniform Shirts Are you ready to Join our Family & Be True? Call for immediate interview 480-813*8783 or reply by email Job Type: Full-time Benefits: • 401(k) matching, • Health insurance, • Paid time off Schedule: • 8 hour shift Experience: • Appliance repair: 1 year (Required) Ability to Commute: • Mesa, AZ 85215 (Required) Work Location: In person Company DescriptionWe are family owned & family operated, been established since 2013. We pride ourselves on being True to our customers.We are family owned & family operated, been established since 2013. We pride ourselves on being True to our customers.

Job Description As an industry leader providing time and labor management solutions for over 25 years, Synel Americas () offers a small company culture within an international company. We work hard but enjoy a relaxed atmosphere and many employees have been with our organization for years. Our office is conveniently located in North Scottsdale. We are seeking a self-motivated, detail-oriented, and goal-driven individual to join our production/computer hardware department. We currently have both part-time and full-time positions available: * Part-Time: 4–5 hours/day, mornings, Monday through Friday * Full-Time: 8:00 AM – 4:00 PM, Monday through Friday Synel Americas offers competitive salaries and benefits, along with a supportive, small-company culture backed by an international organization. Primary Responsibilities Include: • Inspection and testing of hardware devices related attachments, • Filling orders, • Repair of hardware devices, • Shipping and receiving (boxes up to 50 POUNDS), • Inventory counts, • Cleaning of work area, • Inspection and performing QC on hardware devices, • Putting each new device through a multi-point check process (bench testing), • Shipping out product orders to customers, • Diagnosis and repair of hardware devices, • Receiving new hardware devices, • Cleaning maintaining work area Desired Skill Set: • Previous bench testing experience or exposure to bench testing, • Previous computer or electronic hardware repair/troubleshooting experience, • Someone with mechanical aptitude, • Someone who follows process protocols, • Someone ok with repetitive tasks, • Someone who is punctual, • Someone who is patient, • Someone who is detail oriented, • Someone with a technical aptitude, • Basic knowledge of how to use computers and average typing speed, • Ability to lift boxes up to 50 POUNDS Salary: $16 - $20/hour depending on experience Company DescriptionSynel is a world leader in the development and production of data collection systems and solutions for workforce management of time & attendance, including access control and job costing. SynelAmerica's portfolio of products provides complete hardware and software solutions, including advanced biometric data capture devices with fingerprint scanning technology, facial recognition and more. Solutions are available for complex, multi-location enterprises and single-building facilities of all sizes. SynelAmerica's solutions provide on-line and real-time data collection for immediate access to information throughout an organization. Harness the ability to improve efficiency and effectiveness, reduce costs, and provide an innovative user experience while maintaining compliance.Synel is a world leader in the development and production of data collection systems and solutions for workforce management of time & attendance, including access control and job costing. SynelAmerica's portfolio of products provides complete hardware and software solutions, including advanced biometric data capture devices with fingerprint scanning technology, facial recognition and more. Solutions are available for complex, multi-location enterprises and single-building facilities of all sizes.\r\n\r\nSynelAmerica's solutions provide on-line and real-time data collection for immediate access to information throughout an organization. Harness the ability to improve efficiency and effectiveness, reduce costs, and provide an innovative user experience while maintaining compliance.

Job Description We are a high volume Toyota Scion store averaging over 5,000 service vehicles a month. Work in a totally air conditional shop that is one of the largest and most advanced in the valley. Parts delivered to your bay. Job Responsibilities: Ability to Diagnosis Problems and Determine the Appropriate Repair Repair Vehicle in a Quality Manner Check your Work to Prevent Repeat Repairs Prompt, Courteous, Efficient Energetic, Self-Starter & Highly Motivated Analytical & Problem Solving Ability Qualifications: 5+ Years Automotive Experience 3+ Years Import Experience ASE Certified a Plus Judgment & Decision Making Skills – Ability to consider the relative costs and benefits of potential actions and choose the appropriate path to repair Proven Track Record for Production Proven Track Record for CSI Standards Good Driving Record Good Understanding of Dealership DMS System Neat Appearance and Grooming Positive Enthusiastic Team Player Pay Plan: Flat Rate Hours Produced times an Hourly Rate, Rate determined by Experience, Paid Vacation, Medical, Dental, 401K & Profit Sharing. Company DescriptionSince 1937, Big Two Toyota/Scion in Chandler, Arizona has strived to meet the ever-changing needs of their customers. Over the years, they have expanded and refined their facilities and staff to better serve each customer with a high level of honesty, integrity, and service. Not your ordinary dealership, not your ordinary place to build your career. Big Two is a great place to start or continue your career in the automotive industry - whether your are looking for opportunities in sales, service, repair, finance or accounting we are a growing dealership that is always looking for great people. View our postings and apply today!Since 1937, Big Two Toyota/Scion in Chandler, Arizona has strived to meet the ever-changing needs of their customers. Over the years, they have expanded and refined their facilities and staff to better serve each customer with a high level of honesty, integrity, and service.\r\n\r\nNot your ordinary dealership, not your ordinary place to build your career. Big Two is a great place to start or continue your career in the automotive industry - whether your are looking for opportunities in sales, service, repair, finance or accounting we are a growing dealership that is always looking for great people. View our postings and apply today!

Job Description Join our TEAM at Ace Handyman Services and come work for one of the most trusted brands in hardware! We are a top-rated home repair company, who is under the same corporate umbrella as Ace Hardware. We are looking for trade professionals, who want to work for our company directly, not as a subcontractor. The job involves completing a variety of property improvements and repairs for our residential and commercial customers. Our sales team books jobs for you that are compatible with your skillset. We service customers in the East Valley of the Phoenix area only. Some projects require working by yourself and other projects require working with other technicians. The top skills we need are professional carpentry, remodeling, painting, drywall experience, and door repair or installation. Our employees are well supported in the field and have the business owner and peers readily available to help troubleshoot or to ask questions. In addition to hourly pay, we pay employees to use their own trucks or vans and their own tools. Carpenter Handyman Benefits: • Stable year round work, • Monday through Friday work week (8 am to 5 pm) - Weekend work is optional, • Schedule flexibility, • Competitive pay and paid time off, • Pay for windshield time and the use of personal truck or van, • Full time employment with the flexibility of an independent job, • Positive work environment, • Advancement into a well-paying lifelong career, • Locally owned company with the backing of a national brand, Ace Hardware, • Health Insurance, • Dental and Vision Insurance, • 401(k) Plan, • Represents the Ace brand well: professional, reliable, skilled, high integrity, problem solver, and has a strong work ethic, • 10+ years of construction experience desired

Job Description Overview Ansible Government Solutions, LLC (Ansible) is currently recruiting Phlebotomists to support the Phoenix VA Health Care System, specifically at the South East CBOC located at 3285 S Val Vista, Dr, Gilbert, AZ 85297. The shift schedule is typically Monday-Frida 0730-1600 no weekends or holidays. If you accept employment with Ansible, you must also acknowledge that any assigned schedule is subject to change at the direction of either Ansible or its customers. Exceptional compensation packages with full benefits are available. Ansible is a Service-Disabled Veteran-Owned Small Business (SDVOSB) providing Federal customers with solutions in many arenas. Our customers face wide-ranging challenges in the fields of national security, health care, and information technology. To address these challenges, we employ intelligent and committed staff who take care of our customers’ success as if it is their own. Responsibilities • Performs proper specimen collection and labeling procedures used for routine and special procedures, • Performs all standard laboratory techniques related to phlebotomy such as correcting patient identification, proper collection of samples (volume, tube type, temperature and/or timing conditions) and collection of specimens for urinalysis, 24-hour urines, toxicology and microbiological (sputum and urine), all defined within the standard operating procedures, • High school diploma or equivalent, • Phlebotomy certification from an accredited agency (i.e. CPT I/II licensing in California), • Completion of an approved phlebotomy training course (or equivalent), • American Heart Association (AHA) CPR/Basic Life Support (BLS), • Minimum of 1 year of experience within the last 3 years as a patient service technician/phlebotomist, • 2-3 years of phlebotomist experience in an acute care setting is preferred, • Proficiency in the following: blood collection by venipuncture and capillary technique from patients of all age groups, urine drug screen collections, paternity collections, breath/saliva alcohol testing, LCM/Cyber Tools, TestCup, pediatric blood collections, and difficult draws, • Sit, stand, walk, lift, squat, bend, twist, and reach above shoulders during the work shift, • Lift up to 50 lbs from floor to waist, • Lift up to 20 lbs, • Carry up to 40 lbs a reasonable distance Powered by JazzHR xtrgfxm2He

Job Description ABOUT UDA: UDA is a local, family-owned, dairy cooperative committed to serve the needs of our members, community, and customers by providing high quality milk and dairy products. As the only milk marketing co-op in the state, UDA oversees the production, processing, and marketing of Arizona's finest milk products from farm to Retail in 48 hours or less. From sweet cream and butter to non-fat dry milk, UDA provides milk products to manufactures and supermarket chains throughout the Grand Canyon State. Our motto at UDA is “United in Excellence.” The dairy industry's success isn't built on one dairy or brand, its built on the community as a whole - this includes our amazing employees. When you join UDA, you're not just joining a business, you're joining a family. Since 1960 UDA has been headquartered, operated, and managed in Arizona. We strive to provide our employees with rewarding career opportunities aimed at long-term stability, growth, and advancement. We put our heart and soul into our products and value our team who show up, every day and do the work. JOB SUMMARY DESCRIPTION: Managing a dairy farm is no easy task - especially when equipment or tools stop functioning. When things start breaking our members need quick, effective, fixes to get things moovin' again. That's where our Service Maintenance Technician will come in! The Service Technician is responsible for providing mechanical service, equipment installations, and repairs to all UDA member dairies. SCHEDULE: M-F. Start time: 7am. End time: when the job gets done! Also requires night & weekend (days/nights) on call rotation availability! SERVICE TECHNICIAN PRIMARY FUNCTIONS AND RESPONSIBILITIES: • Service member dairy farms with equipment maintenance, repairs, and replacements in an accurate and timely manner, • Collaborate with famers to understand service needs and ensure all equipment is functioning with minimal downtown, • Drive to various farms, throughout Arizona, to assist with scheduled and unplanned service needs, • Ensure fans, coolers, refrigeration equipment is operating efficiently, • Prioritize multiple service requests and projects, • Report and manage accurate and legible records of all services completed and pending, • Request and prepare equipment and tools needed for each project, • Always maintain food safety and quality standards, resolving and/or reporting compliance issues immediately QUALIFICATIONS: Skills & Abilities: • Excellent organizational and time management skills, • Comfortable working with and around livestock (Yes, we do mean cows), • Effective problem analysis and problem resolution skills, • Strong written and oral communication skills with the ability to communicate effectively with a diverse range of individuals, • PLC and process controllers helpful, • Mechanical experience with drives, pumps boilers, air compressors, etc., • Electrical experience 120, 240 & 480 volt systems, • Knowledge of commercial Freon refrigeration systems, • Must be able to use technical manual and testing equipment, • Must be familiar with dairy product concepts, practices and procedures, • Ability to make decisions impacting products and safety based on independent judgment and discretion, • Must provide personal hand tools, • Self-motivated with the ability to work with minimal direction and supervision, • Shift work required, willingness to work nights, weekends and holidays Experience: • Minimum of 2 years in refrigeration, electrical, plumbing, hydraulic experience or certificate from refrigeration technical school, • Clean driving record to drive a company vehicle Education/Certifications: • High School Diploma, or equivalent PHYSICAL REQUIREMENTS: • Requires ability to sit, walk and stand for prolonged periods of time, • Requires ability to stoop, bend, reach, lift and carry items up to 50lbs, • Requires ability to climb ladders and stairs of varying heights, • Requires ability to work outdoors in varying weather conditions and extreme heat, • Requires ability to visually observe the condition of surroundings, • Requires ability to hear and speak BENEFITS: • Medical, Dental & Vision plans, • 401(k) Retirement Plan with employer match, • Disability Insurance, • Life Insurance, • Employee Assistance Program, • Health & Wellness Programs, • Paid Time Off, • Shift Pay Differential, • Education Assistance, • On-site Fitness Center UDA is an equal opportunity employer. Applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability, or protected veteran status. Powered by JazzHR rpBPu7NA5b

Job DescriptionCompany Description Express Oil Change & Tire Engineers is the pre-eminent automotive maintenance provider in the nation with over 350 locations across 21 states, leading our industry through excellence, innovation, and growth. Don’t let our name fool you, in addition to our fast oil change bays, our locations can be your one-stop shop with certified technicians providing a variety of mechanical services, as well as tire services. Job Description The General Service Technician is responsible for providing quality service and premium vehicle repair in a timely manner. This position will adhere to and promote the Company mission while operating within the confines of the Company’s core values and contributing to the success of their functional team. Primary Responsibilities include (but are not limited to): • Change oil and oil filters in cars and light trucks, • Provide automobile tire care in the form of installation, repair and rotation, • Inspect and top off engine fluids, • Lubricate Frontend parts as needed, • Perform accurate and thorough vehicle inspections following a checklist of potential trouble spots such as: belts, hoses, brakes, etc., • Move and operate customer vehicles into and out of service bays, • Maintain positive customer relationships, • Maintain positive and productive working relationships with co-workers and management, • Keep tools, equipment and work areas clean and functional, • Maintain a safe, clean, and organized work area, • Act in a professional manner suitable as to represent our organization with which you are employed, always and in every instance projecting an attitude of trust, honesty, and respectQualifications We are looking for: • A High School Diploma, GED or equivalent, • One year or more years of experience in basic car care helpful but not necessary, • Customer-focused attitude with ability to work well in a team environment, • Must be mechanically inclined, • Valid driver’s license, • Ability to pass a pre-employment background screen, • Effective communication and interpersonal skills, • Top-notch customer service skills with a desire to build long term trust and relationships with our customers, • Willingness to work Saturdays Additional Information All your information will be kept confidential according to EEO guidelines. Physical Requirements: • Prolonged periods of standing, stooping, and bending, • At time, exerting 50 - 100 lbs of force occasionally and/or 10 - 25 lbs of force frequently and/or greater than 10 lbs of force constantly to move objects

Job DescriptionJob Summary: We are looking for a Service Technician to join our growing team! The right candidate will have a strong service technician background and ASE certified. The day-to-day duties include performing work on specific repair orders and diagnosing what repairs need to be done. About us: Since 1923 the Coulter Automotive Group has been a family owned and operated business in the Valley. We are one of the most stable auto dealers in Arizona and are in the highest percentile in customer satisfaction scores. We believe our employees are our greatest asset. As such, we treat all employees with respect and appreciation for their contributions to the company. We believe not only in providing ongoing training, but also rewarding outstanding effort and results. We are always looking for talented and enthusiastic individuals to join our team! Benefits • 401k, • Medical and dental insurance, • Paid vacation, • Opportunity to progress to higher levels of responsibility throughout the organization - promoting from within is part of our family philosophyResponsibilities, • Perform work specified on the repair order with efficiency and in accordance with dealership, • Test-drive vehicles, and test components and systems, using diagnostic tools and special service equipment, • Diagnose, maintain, and repair vehicle automotive systems including engine, transmission, electrical steering, suspension, brakes, air conditioning, etc., • Communicate directly with the Service Advisor so that customers are informed if any additional service is needed. Provide an estimate of time needed for additional repairs, • Execute repairs under warranty to manufacturer specificationsQualifications, • 2+ years of Service Technician experience preferred, • High school diploma or equivalent,, • B level qualifications, including Diagnostic, Electrical and Engine Repair, • Dexterity, requiring a steady hand, excellent hand-eye coordination, • Mechanical and troubleshooting skills and ability to operate electronic diagnostic equipment, • Excellent customer service skills and basic computer competencies, • Positive, friendly attitude, along with an eagerness to improve, • Enjoy working in a dynamic environment, • Teammate with ability to collaborate with others effectively, • Ability to learn new technology, repair and service procedures and specifications, • Valid driver's license and clean driving record We are an equal opportunity employer and prohibit discrimination/harassment without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

Job DescriptionRV Technician East ValleyAbout Us We are a trusted, Local family-owned RV dealership dedicated to delivering exceptional service to our customers. With a tight-knit team and a passion for the RV lifestyle, we create a supportive work environment where your skills are valued, and your growth is encouraged. Join us to make a difference for RV enthusiasts while building a rewarding career! Job Description We’re seeking experienced RV Technicians to join our team. As an RV Technician, you’ll diagnose, repair, and maintain recreational vehicles to ensure our customers hit the road with confidence. If you’re skilled, reliable, and share our commitment to quality, we’d love to meet you! Key Responsibilities: * Diagnose and repair RV systems, including electrical, plumbing, HVAC, and appliances. * Perform routine maintenance, inspections, and installations. * Troubleshoot complex issues and provide high-quality repairs. * Collaborate with our team to ensure top-notch customer satisfaction. * Maintain a clean, safe, and organized work environment. Qualifications: * 2+ years of RV repair experience (dealership or independent). * RVIA/RVDA certification or equivalent preferred. * Proficiency in RV systems (electrical, propane, plumbing, etc.). * Strong problem-solving skills and attention to detail. * Valid driver’s license and reliable transportation. * Team player with a positive attitude and strong work ethic. Why Join Us? * Competitive Pay: Earn $20–$45/hour based on experience, plus performance bonuses. * Supportive Environment: Work with a family-oriented team that values your expertise. * Benefits: Health insurance, paid time off, and tool allowances. * Growth Opportunities: Access to ongoing training and career advancement. * Flexible Schedule: Enjoy work-life balance with options for flexible hours. * RV Lifestyle: Be part of a community passionate about adventure and travel. Our People Make the Difference If you're considering a RV lifestyle, chances are you share our love for the open road. For us, this love goes back over 60 years when we sold our very first trailer in Mesa, Arizona. We are an Arizona RV Dealer who is proud of our history and we look forward to continuing this legacy for years to come. Our dealership provides unmatched customer service that you won't find anywhere else. We are proud to offer lifetime warranty on all new and gently used RVs. Lastly, we are dedicated to our mission statement that "Our People Make the Difference!"

Job DescriptionSalary: Important: This is a talent pool / evergreen posting, not a current open position. We review candidates in this pool as new positions open. If your experience matches a future opening, well reach out to you directly. Our main office is located in Chandler, AZ but we operate throughout the southwest and may need candidates throughout AZ, NM, TX, and beyond. 1. Purpose of Role Perform demolition, framing, drywall, painting, and fixture installation so residential/commercial remodel scopes meet plan requirements, safety rules, and quality standards. 2. Scope & Decision Rights Responsible for site preparation, cleanup, and adhering to safety regulations and quality standards. Performs various construction and repair tasks in residential and commercial properties, which may include minor electrical, plumbing, and carpentry work. Communicate effectively with homeowners and project managers. 3. Essential Duties and Standards Owns: Demolition, framing, drywall, painting, and fixture install, and Site protection, cleanup, and punchlist closeout. Supports: Minor electrical/plumbing under licensed direction and staging. Recommends/Prepares: Detail improvements for fit and finish. Escalates: Hazards, unplanned conditions, or drawing conflicts. 4. Critical Competencies (must-demonstrate) • Communication, • Problem Solving, • Teamwork, • Safety Awareness and PPE Use, • Reading Drawings/Isometrics, • Problem Solving and Root Cause Thinking, • Time Management and Prioritization, • Perform demolition per standards and procedures, • Perform finish carpentry per standards and procedures, • Use hand tools safely and effectively for trade tasks, • Perform painting per standards and procedures 5. Qualifications • Entrylevel experience in wide range of trade tasks; reliable attendance; ability to follow safety rules and work procedures., • Proficiency with trade tasks such as Demolition, Finish Carpentry, Hand Tools, and Painting., • Demonstrated work practices including Communication, Problem Solving, and Teamwork. 6. Performance Measure Buckets • Finish quality and punchlist closure, • Schedule adherence, • Customer/PM feedback, • Attendance

Job DescriptionDescriptionWilson Engineers is an Arizona-based firm with a staff of more than 180 personnel specializing in water and wastewater engineering and construction management services. We are dedicated to delivering ethical, reliable, high quality services to our clients based on innovation, while sustaining a challenging and rewarding work environment for our greatest assets, our employees. We are seeking an entry-level Construction Management Technician to join our team. This position requires 40 hours per week working in the field in various locations around the greater Phoenix Metropolitan area. (This job is not remote nor hybrid.) Join our team as a Construction Management Technician, where you’ll play a vital role in supporting construction management staff through all project phases—from preconstruction to construction. This entry-level position provides hands-on experience, professional growth opportunities, and the chance to work alongside experienced engineers and construction managers in a collaborative, fast-paced environment. As a Construction Management Technician, you will contribute to construction projects by assisting with fieldwork, construction project documentation, and project coordination while receiving comprehensive training and mentorship. Essential Duties and Responsibilities• Assist with construction management tasks on multiple projects, including preconstruction services, and construction administration. • Perform field inspections, collect test data, and provide support for civil, mechanical, electrical, or instrumentation construction activities., • Assist with reviewing submittals, RFIs, and engineering directives/clarifications., • Support construction managers with monitoring project schedules, tracking milestones, and reporting progress., • Prepare meeting agendas, schedule meetings, and document meeting minutes accurately., • Support key construction project documentation management., • Coordinate with sub-consultants, contractors, and utility providers to help advance project goals., • Support the preparation, organization, and review of daily, weekly, and monthly reports, and other project documents., • Collaborate effectively with internal teams, including engineering staff, inspection staff, and administrative staff., • Communicate clearly with project stakeholders, including clients, consultants, and team members. #LI-DH1 Requirements• Associate degree (or higher) in a related field from an accredited institution preferred. • Proficiency in Microsoft Office Suite (Word, Excel, PowerPoint) required; familiarity with tools such as AutoCAD, Microsoft Project, or Primavera P6 software is a plus., • Strong attention to detail, analytical skills, and ability to document project progress effectively., • Excellent verbal and written communication skills., • Ability to thrive in a team-based environment while managing tasks independently with guidance., • A valid driver’s license may be required for travel to field sites. Why Join Us? • Professional Development: Hands-on training and mentorship to support your growth in advanced construction management roles., • Career Growth Opportunities: Clear pathways to advance within inspection and construction management teams., • Work-Life Balance: Supportive, collaborative work environment with a mix of office and field-based tasks. Location: This position is based in Phoenix/Tempe, AZ with opportunities to visit project sites in the surrounding area as needed. BenefitsThe comprehensive benefits plan offered by Wilson Engineers exceeds industry standards, and is aimed at meeting each employee's personal and professional expectations. Benefits include personal time off, paid holidays, medical, dental and vision coverage; plus a flexible spending plan and short and long-term disability. Wilson Engineers also helps in securing your financial future by offering 401k plans with employer matching.Benefits plan offered to our full-time employees: • Medical Plan, • Vision Plan, • Dental Plan, • Group Life Insurance, • Short Term Disability, • Long Term Disability, • Voluntary Term Life Insurance, • Liberty Mutual Insurance, • Personal Time Off (PTO), • Paid Holidays, • 401(K) Retirement Plan, • Section 125 Flexible Benefits Plan, • Tuition Reimbursement, • Employee Referral Bonus

Job Description Clean Tech Job Description Job Title: Field Service Technician (FST1) Department: Field Service Reports to: Site Manager FLSA Status: Non-exempt Position Summary / Job Scope If you like to make equipment work better, this is the role for you. As a Field Service Technician, you’ll work at customer sites where you are the face of Clean Tech and an integral part of a vibrant and diverse team. We train our Field Service Technicians to support the technology that the world relies on to ensure clean air. You are a steward of the environment when Centrotherm Abatement Systems perform to their potential. You’ll work beside global customers to install, maintain and upgrade their Centrotherm equipment, delivering world-class support for multimillion-dollar production systems. Minimum Knowledge and Skills This is an entry-level position and will be compensated on an hourly (non-exempt) basis. You must possess the minimum qualifications to be initially considered for this position. Preferred qualifications are in addition to the minimum requirements and are considered a plus factor in identifying top candidates. Experience would be obtained through a combination of prior education level classes, and current level school classes, projects, research, and relevant previous job and/or internship experience. The following skills are valued for success: • Good communication skills to interact with the factory and other customers/stakeholders within a diverse organization, • Role modeling safety and attention to detail in following procedural requirements related to the handling of hazardous production materials, • Good verbal and written communication skills, • Teamwork skills, • Interpersonal skills, • Usage and understanding of basic hand tools, • Proficiency with Microsoft Office, • Personal focus on safety for the individual and those around them Essential Functions and Major Responsibilities ((An * denotes duties or responsibilities judged to be "secondary functions" in terms of the American with Disabilities Act or ADA) • Performs preventative maintenance inspections and required preventative maintenance duties on Centrotherm equipment., • Under supervision, perform periodic system maintenance and minor corrective maintenance per customer schedules and requirements., • Performs prescribed maintenance per defined procedures and work instructions., • Performs work within generally defined parameters., • Assignments are semi-routine and accomplished with supervision from senior FST or appropriate lead/supervisor., • All other duties as assigned by Supervisor., • Adheres to all company and customer safety policies., • 6+ months of experience operating and performing repairs and preventative maintenance in a semiconductor manufacturing or other similar industry. Minimum and Preferred Education/Training/Experience The candidate must possess at least one of the following educational or experience requirements: • Associate of Arts or Associate of Science degree in STEM or technical program., • Military service with 6+ months of experience considered in lieu of degree and/or equivalent technical degree., • Technical certification or trade school diploma., • 6+ months of experience gained through a certification, apprenticeship, or other facilities experience. Physical Requirements and Working Conditions Must be able to: • Work in an environment with potentially hazardous materials wearing coveralls, hoods, booties, safety glasses and gloves., • May require use of a respirator., • May require the ability to carry out a coworker in case of emergency., • Able to lift up to 30 pounds. Typically walks 3-5 miles a day with additional time spent standing/sitting., • Work a fixed schedule as determined by management and customer requirements. Monday-Friday or compressed work weeks both day and night. Benefits include: Medical, Dental, Vision, 401(k) Profit Sharing, STD/LTD, Life Insurance, Vacation, Sick Pay, Holidays, EAP and more All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran or any other protected class by local/state/federal laws. Shift 4 - 2 openings - (17:45 - 06:15 Sun, Mon, Tues, and every other Sat - 30 Min Lunch) Shift 6 - 2 openings - (17:45 – 06:15 Weds, Thurs, Fri, and every other Sat – 30 Min Lunch)

Job Description Service Technician – Recreational Vehicles Are you a skilled RV Technician looking to work for an honest company that believes "Our People Make Thae Difference"? We are a 61 year old Mesa, AZ multiline RV dealership that believes in taking care of our customer. We are looking to continue our legacy for many years with exceptionaL technicians eagerly working to help and assist our customers. We need you if you enjoy diagnosing and repairing RVs. We want technicians that are able to work with minimum supervision. Someone with a desire to learn and keep current with technology. One who can communicate technical information both written and verbal to the service advisor. As an experienced technician, you would be expected to be competent in skills such as: RV roofing, structure repair, plumbing (fresh water, gray water and black water systems),hydraulic system repair, heating, air conditioning,electrical (110v AC and 12v DC), converters, inverters, entertainment and functional electronics, towing system installations, tow vehicle wiring, propane systems, metal work etc. You will supply your own tools. Education and/or Experience High school diploma or GED (general equivalency diploma) Certificates, Licenses, Registrations Operator Driver's License Compensation $17 - $40 / hour Flat rate based on experience Benefits Health, Dental, Vision, 401k, Paid Vacation, Paid Holidays Our People Make the Difference

Job Description Job Title: Foreman II – Commercial Plumbing Tempe Mechanical is growing, and we need you! We offer competitive pay, a full range of benefits, PTO, sick time, company events and more. Join our team today! Our Mission and Vision To Empower people, families, and clients by creating a workplace where tradesmen and women can learn and develop essential life skills. To raise a community of skilled people that will build the future and improve the quality of life for individuals and organizations. Your Purpose in this Role We are one of the top premier Commercial HVAC and Plumbing Contractors in the state of Arizona. We are looking for growth-motivated and self-starting individuals who value efficiency, reliability, and family. Your purpose as a Commercial Plumbing Foreman will be managing and overseeing plumbing projects pertaining to commercial construction projects. The non-negotiables will be to ensure that plumbing systems are installed to IPC requirements, safety rules are enforced, and you train and develop your team. Pay $35.00 to $40.00 – Pay Rate Determined in Interview. Your Duties and Responsibilities • Assigning and supervising plumbing personnel engaged in installing, repairing, and maintaining various plumbing systems., • Overseeing and inspecting the installation and repair of plumbing equipment, fixtures, and apparatus, such as pipes, sinks, traps, valves, faucets, vents, and pumps., • Estimating labor and material costs for jobs, maintaining records, and requisitioning necessary materials and supplies., • Planning and organizing work based on oral and written instructions., • Conducting regular inspections of ongoing work and completed projects, and occasionally participating in more complex plumbing tasks., • Collaborating with the Project Manager on proposed plumbing projects and offering recommendations., • Recruiting and training plumbing trade personnel., • Be able to read submittal data and RFI's., • Provide the project manager with information to write RFI when needed., • Keep and update redline drawings., • Establishing safety and work performance standards for subordinates in accordance with Javits Center policies and procedures., • Must have strong communication skills., • Clean Driving Record., • Strong knowledge of the IPC requirements., • Current OSHA 30 Card (Or willing to get it in the first 6 weeks of employment.), • Ability to run projects over $200,000. Plumbing Superintendent Benefits • Medical Insurance, • Dental Insurance, • Vision Insurance, • Life Insurance, • Profit Sharing Retirement Plan, • ZayZoon – Wages on Demand, • 6 Paid Holidays, • 48 Hours of Paid Time Off, • Travel to job sites across the Greater Phoenix Area. We're an equal opportunity employer. All applicants will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran, or disability status.

Job Description SUNLAND ASPHALT Build your career from the ground up. Come join our Award Winning Team. Sunland Asphalt & Construction, LLC. strives to recruit top talent and we are committed to help you grow both professionally and personally. We are confident you will find our Company a dynamic and rewarding place in which to work because here at Sunland Asphalt our vision is: 'To be the best place in the world to work.' Voted as one of Phoenix Business Journal's 'Best Places to Work,' Sunland offers employees: • Competitive Weekly Pay and Paid Time Off, • 401(K) with Employer Match, • Work/Life Balance and Community Involvement, • Comprehensive Health Benefits including; Health, Dental, Vision, • Award Winning Peers & Projects, • And A Foundation Built on Safety POSITION PURPOSE The Survey Technician set grade stakes to guide earth moving equipment operators in sloping highways and fill embankments. Grade checkers may also perform a variety of physical tasks to include operating heavy equipment and machinery and using power tools and/or hand tools as defined by each job/project. ESSENTIAL DUTIES AND RESPONSIBILITIES • Employee shall perform all duties and responsibilities with Sunland's Core Values at the forefront., • Sets grade stakes to guide earth moving equipment operators in sloping highways and fill embankments, using measuring instruments and hand tools: Reads survey stakes along highway right-of-way to determine grade specification for embankment, • Measures horizontally and vertically, in specified ratio, from survey stake to juncture of embankment and initial excavation, using survey rod and eye level., • Sets grade stakes, using hatchet, and chalk-marks excavation reference points on stake., • Repeats measuring and staking at specified intervals to form horizontal stake lines along embankment., • Observes excavating activities to verify conformance to stake references and notifies equipment operators or supervisor of deviations., • Must be a strong communicator and be in constant contact with the earthmovers, paver operators, truck drivers and general laborers., • Must work quickly, productively and safely to meet production goals as outlined by the Foreman, Superintendent and/or Production Manager and concerning daily production schedule., • Must be an advocate of safety and follow safety policies and procedures., • Actively participate in job-site and safety meetings and all Company related training., • Inspect, clean and maintain equipment and machinery., • May set up and tear down equipment., • Maintain a clean job site; pick up all tools, equipment, and secure job site each day., • Understand material handling and storage in compliance with SDS sheets., • Coordinate and work with contractors, sub-contractors and vendors to complete job., • Serve as front-line Company representative and must provide excellent service to the customer and to the public., • Use equipment and/or an assortment of hand tools such as rakes, shovels, wheel barrels, etc., • Perform all other general laborer work as needed., • Any and all other duties assigned. Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. SUPERVISORY RESPONSIBLITIES • This position has no supervisory responsibilities. COMPETENCIES • C ustomer Focus - Customer Orientation, • O wnership - Results Driven, Performance, Time and Stress Management and Composure, • R elationships - Teamwork Orientation, Diversity and Inclusion, • E thics - Honesty, Integrity, Do the Right Thing, • S AFETY - The Foundation of Everything We Do Safety • This position is considered a safety-sensitive position and is subject to the company's drug and alcohol policy, as well as all OHSA regulations., • All employees must wear the appropriate personal protective equipment (PPE)., • Serves as a safety ambassador by complying with federal, state and local laws, as well as Company safety policy, enforces safe work practices, and proactively identifies and remedies worksite hazards. Physical Demands and Work Environment • This position operates at professional construction sites, requiring the ability to communicate with verbally others on site, in person and over the telephone, ability to read printed materials, signs and directions, stamina to maintain attention despite interruptions, ability to lift, push, pull, carry, handle or feel objects, supplies, tools, machinery and/or controls weighing up to 50 pounds and reach with hands and arms; climb stairs and/or ladders; balance, bend, stoop, kneel, crouch, crawl, lift overhead, traverse around or otherwise position one's self around the required work and safety requirements to navigating and perform activities on various construction sites in a safe manner., • Will be required to work on project sites and operate vehicles, trailers, machinery, equipment and other tools within local, state and federal safety guidelines., • This position operates in a professional field environment. The position requires working outside, frequently for long periods of time in all weather, including extreme hot and cold temperatures., • While working, the employee might be exposed to various chemicals, vapors, pollutants, virus or other air-borne pathogens, gases, uneven surfaces, loud noises, moving vehicles or machines and dust/debris. POSITION TYPE/ EXPECTED HOURS • This is a full time position. Occasional evening and weekend work may be required as job duties demand. TRAVEL Education, Work Experience and Requirements • A high school diploma or GED is preferred., • Six (6) months to one (1) year related experience is preferred., • Must be fluent in English, i.e., must be able to speak, read and write English. Certifications, Licenses, and Registrations • A valid driver's license and a clean motor-vehicle record preferred., • Passing a pre-employment drug and alcohol screening and background check is required. AAP/EEO STATEMENT Sunland Asphalt is an EEO/Affirmative Action Employer DISCLAIMER: The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not intended to be construed as an exhaustive list of all responsibilities, duties and skills required of personnel so classified. The roles and objectives of this job do not include setting corporate policy and does not constitute a managing agent of the company. Sunland Asphalt, LLC. is an equal opportunity employer. We evaluate applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, and other legally protected characteristics. Sunland Asphalt is committed to working with and providing reasonable accommodation to individuals with disabilities. If because of a medical condition or disability you need a reasonable accommodation for any part of the employment process, please email and let us know the nature of your request and your contact information. Job Posted by ApplicantPro

Job Description The Field Service Technician II plays a crucial role in troubleshooting, maintaining, and repairing low voltage systems, including network infrastructure, surveillance cameras, servers, NVRs, access control hardware and software, and audio-visual systems. Reporting directly to the Service Manager, this position requires a highly motivated self-starter with exceptional technical expertise in low voltage systems and a strong commitment to delivering outstanding customer service. The Field Service Technician II also acts as a mentor and leader for the Field Service Technician I, providing guidance and support to help them develop the skills necessary for advancement. Participation in Premise One's on-call service program is a key component of this role. Key Responsibilities • Safety & Site Preparation: Conduct pre-work site assessments and safety checks to ensure a safe working environment., • Customer Service Excellence: Provide exemplary customer service, consistently maintaining the highest service standards and client satisfaction., • Field Leadership: Lead by example, guiding Field Service Technician I employees to ensure efficient, first-time resolution of service issues., • Project Execution: Implement job plans with a focus on quality assurance and safety compliance, ensuring project completion meets company standards., • Autonomous Field Operations: Operate independently in the field, making informed decisions to resolve technical issues on-site., • Technical Troubleshooting: Diagnose, service, and repair low voltage systems in commercial and enterprise environments, ensuring all repairs adhere to company and industry standards., • Testing & Documentation: Test all repairs on-site in alignment with Service Operations and Engineering policies. Accurately document all work performed, including notes, photos, and communications, in online ticketing systems and timecards., • On-Call Rotation: Participate in the on-call rotation, providing emergency after-hours service as required., • Vehicle Maintenance: Maintain the company-issued vehicle in accordance with company standards, ensuring it is always in optimal condition., • Professional Conduct: Maintain a professional appearance and demeanor at all times, representing the company positively in all interactions., • Continuous Improvement: Provide feedback and suggestions to the Field Superintendent or Service Manager to enhance service delivery and field operations., • Communication: Proactively communicate scheduling issues and other concerns to the Field Superintendent, Service Manager, and dispatchers., • Experience: 5+ years of experience in Audio Visual, Security, Intercom/Paging, and Infrastructure Cabling., • Technical Knowledge: Strong understanding of programming, technical commissioning guidelines, and troubleshooting philosophies., • Industry Expertise: Familiarity with industry-standard tools, equipment, and test devices, such as Fluke testers, meters, and OTDR., • Security Background: Preferred candidates will have a robust background in physical security systems., • Genetec, • Software House, • Lenel, • Feenics, • Milestone, • Avigilon, • Flexibility: Willingness to work overtime as needed to meet construction and service schedules., • On-Call Capability: Ability to support 24/7 client SLAs and respond to emergencies when required., • Travel: Willingness to travel at least 60% of the time within the designated service market, with occasional out-of-town travel up to 20%., • Technical Proficiency: Competent in using computers and industry-specific software., • Physical Requirements: Ability to handle physical workloads, including lifting and carrying up to 50 lbs, and the ability to walk, sit, and stand for extended periods. Powered by JazzHR iolvSfpRP3

Job Description Summary Have you dreamed of teaming with other technical professionals to solve problems and support the production of quality product? Would you like to work out of a new, state-of-the-art facility with a financially strong, global corporation eager to support your team’s goals? Amphenol is a worldwide electronics leader and one of the world’s largest manufacturers of interconnect products. Amphenol is listed on the NYSE and a component of the S&P 500 and is a top performing company with an unparalleled history of growth with over 200 locations throughout the world. Amphenol Aerospace (AAO), a division of Amphenol, has been a leader in designing and manufacturing electrical components for the aviation and commercial industry for over 90 years. Amphenol Aerospace is dedicated to providing new, creative solutions to those advanced and challenging market segments that demand an extraordinary level of supplier support and reaction. AAO is currently seeking an innovative individual that demonstrates significant ingenuity in problem solving for the position of Material Specialist Team Lead. The Test Specialist assists the Production Supervisor / Operations Manager by testing our various types of products to support monthly production goals. Essential Duties and Responsibilities • Reads, interprets, and follows blueprints and job instructions to accurately test electrical components including connectors and cable assemblies, • Performs functional and performance tests on connector and cable products to ensure products meet internal and customer quality standards, • Uses specialized testing equipment to conduct tests and collect data, • Identifies issues found during testing and communicates to production supervisors, • Collaborate with engineers or other team members to understand requirements, resolve technical problems, and improve test procedures, • Adheres to sound manufacturing processes and safety standards, • Drives Lean & 5S culture across responsible areas, • Maintain accurate, counts and records of daily transactions of materials, Works-In-Progress, and finished goods through assigned areas, whether manually or electronically, • Ability to understand basic and intermediate electrical principles, • Experience with cable assemblies or high-level electronics preferred, • Operates testing equipment daily, ensuring production schedules are met, • Identify issues from testing machine errors and test results, basic troubleshooting skills required, • Keep management and supervisors aware of testing equipment needed to ensure operational capability, • Facilitating the preparation of Works-In-Progress and finished goods for shipment with urgency in respect to delivery dates and shipping timelines, • Capable of identifying parts and materials from specifications, drawings, or instructions, • Work with peers and management to facilitate and ensure timely processing of parts and materials, • Will work with all tools, gauges, precise measuring equipment, weighing equipment, and automated equipment necessary to complete tasks, • Strong communication, Core Value commitment & excellent attendance, • Intermediate computer skills, • Motivated self-starter, possesses abilities to work under general supervision The Company - With manufacturing sites in Sidney, NY, Mesa, AZ, Nogales, MX, and a Design Center in Pasadena, CA, Amphenol Aerospace Operations has been a leader in designing and manufacturing electrical components for the aviation and commercial airplane industry for 100 years. Focusing on serving the needs of advanced and challenging market segments, we pride ourselves on our consistent ability to innovate and provide the markets with new creative solutions. Working at Amphenol means you are recognized and valued for your contributions because we believe that our human capital is the most valuable asset we have. We support and encourage career development for all employees and have ample opportunities for advancement. We pride ourselves for being customer-centric, accountable, reliable, and enthusiastic in all that we do. These values are ingrained in each of us and contribute to a culture of teamwork and meaningful work. Amphenol offers a competitive salary and benefits. The candidate must be able to legally work in the United States; we are unable to provide sponsorship.?Position requires candidate to be a U.S. person as defined in ITAR, 22 CFR 120.15 (U.S. Citizenship or Resident Alien Status) and defined by 8 U.S.C. 1101(a) (20). Amphenol is a proud Equal Opportunity/Affirmative Action Employer.? All qualified applicants will receive consideration for employment without regard to race, color, religion, marital status, sex, sexual orientation, gender identity or expression, national origin, age, protected veteran status or disability status.? We aim to create an inclusive working environment where all employees are respected and treated equally. Amphenol – Making History, Designing the Future

Job DescriptionBenefits: • Company car, • Competitive salary, • Flexible schedule, • Free uniforms, • Opportunity for advancement, • Bonus based on performance, • Employee discounts, • Flexible Scheduling, • Competitive Compensation Responsibilities • Respond to client requests for appliance service, • Evaluate and diagnose home appliance problems, • Estimate the costs of appliance repair, service, and installation, • Repair appliances, • Provide preventative maintenance and warranty services, • Adhere to manufacturer recommendations, • Teach homeowners how to operate their appliances, • Maintain accurate and detailed recordsQualifications, • High school diploma/GED, • Previous experience as an Appliance Repair Technician is preferred, • Valid drivers license, • EPA 608 refrigerant recovery certification to work on air conditioners and refrigerators is preferred, • Physical ability to stand for extended periods and lift heavy objects, • Excellent customer service skills

Job Description The Field Service Technician supports implementing and maintaining highly technical mission-critical digital mobile communication systems for commercial, Government & Public Safety Communications customers. Job tasks include but are not limited to deployment, optimization, and repair of infrastructure, public safety loggers, subscribers, microwaves, computers, servers, and network equipment. The department works with Customers, System Managers, Engineers, Sales teams, Project Managers, System Technologists to accomplish the mission. This position may be on-call to support mission-critical systems for our public safety customers. Job Description Maintenance and management of highly technical land mobile radio (LMR) communications systems. Focus on maintaining optimal performance levels across an integrated system while proactively addressing and mitigating system-level alarms and malfunctions. Manages system availability through routine system maintenance, performance monitoring, and system-wide Preventative Maintenance. Candidates must be familiar with the latest technologies and troubleshooting techniques for current model digital and analog communications equipment and system architectures. The Field Service Technician provides technical support, verifying swift and accurate responses to all alerts and ensuring appropriate repair or escalation of issues. Preferred Skills: • Experience with Mototrbo Systems, P25 Systems, LMR RF systems, wired/wireless communication systems, networking equipment, IT networks, and subscriber equipment., • Must be able to successfully pass and maintain the ability to pass background checks and obtain security clearances as well as possess and maintain a clean driving record., • Ability to be on-call, • Must have very strong knowledge of wired/wireless communications systems, such as local area networks (LAN) and wide area networks (WAN), • Must have knowledge in standard telephony and dedicated data circuits, as well as knowledge of packet-switching techniques, • Must be highly computer literate with proficiency in MS Word, Excel, Outlook, and Access, • Must have strong self-management skills and "people" skills to work closely with Air Comm’s customers and subcontractor partner community and Air Comm Sales, Engineering, Project Management, and customer service teams., • Must be self-motivated and self-managed to perform the required duties at a distance from direct supervision., • Must be able to solve customer problems quickly during stressful situations, • Knowledge of configuration and testing of channel banks, routers, hubs, and switches, • Ability to develop and present technical training., • Provides guidance in integrating new tools and solutions into the operations of the team., • Proven experience with equipment commonly used in optimizing and testing Motorola communications systems (Communications Systems Analyzers, Power Sensors and Watt Meters, TIMS sets, CPS, RSS, Antenna Systems Analyzers (FDRs), T1 test sets, etc.), • Experience in the configuration and testing of Motorola two‐way radio and subscriber products., • FCC license and industry certifications such as ETA are a plus. Basic Requirements • 2+ years of experience in one of the following: Mototrbo Systems, P25 Systems, LMR RF systems, wired/wireless communication systems and subscriber equipment. Travel Requirements 50%

Job DescriptionCraft Perfection as a Precision Deburring Technician III Imagine starting your day with a crisp traveler in hand. You review the blueprint, check your measurements, and select the exact tool that will turn a sharp edge into a flawless finish. By 5:00am, you’re on the Day Shift (Monday–Friday, 5:00am–2:30pm), shaping parts that leave our facility safe, accurate, and production-ready. Your Day, At a Glance From the first part to the last, you’re the guardian of precision. You’ll move between workbenches and machines, documenting standards, confirming counts, and ensuring nothing leaves your station until it meets the mark. You take pride in doing it right the first time—because quality matters. What You’ll Work On • Complete work per traveler instructions with total accuracy, • Deburr using hand tools tailored to each application, • Read and interpret intermediate blueprints and measurements, • Hold tight tolerances and prevent oversizing during finishing, • Operate sandblast and tumble equipment with confidence, • Scribe identification on parts with vibro-peen tools, • Apply knowledge of surface finishes and edge breaks, • Record production standards and part counts, • Fill out discrepant tag information when necessary, • Maintain a clean, organized, and safe workspace, • Pitch in on related tasks as needs ariseWhat You Bring, • 3+ years of hands-on finishing/deburring experience, • Intermediate proficiency with mechanical hand tools, • High school diploma or GED, • Meticulous attention to detail and strong finishing technique, • Comfort with blueprint tolerances and shop math, • Ability to work both independently and collaboratively, • Be part of a team that prizes quality, safety, and collaboration, • Supportive, hands-on environment where your skill is respected, • Reliable, consistent schedule you can plan your life around

Job DescriptionDescription: Vortex Doors, America’s highest quality and most customer-centric commercial and industrial door repair company, is seeking Service Technicians to join our team of door industry professionals. We are considering applicants with door experience or entry level with no experience! As an Service Technician, you will play a crucial role in installing, repairing, and maintaining various types of doors and related hardware, ensuring they function efficiently and safely. Your attention to detail, problem-solving abilities, strong mechanical aptitude, and commitment to quality workmanship will be essential in meeting our customers' needs. Key Responsibilities: • Door Installation: Install and repair a variety of commercial doors using appropriate tools and equipment., • Repairs and Maintenance: Diagnose and conduct routine repair door-related issues, such as broken springs, hinges, locks, and electrical components., • Hardware Installation: Install and configure door hardware, such as locks, handles, closers, and access control systems., • Safety Compliance: Ensure that all installed doors meet safety and building code regulations and standards., • Customer Service: Provide excellent customer service by addressing client inquiries, explaining repair processes, and offering solutions to door-related problems., • Documentation: Maintain accurate records of service visits, repairs, and installations, and provide reports as required., • Troubleshooting: Diagnose, identify, and resolve technical issues with doors efficiently. Communicate with customers offering cost-effective solutions., • Industry-Best Training., • Commercial/Retail door opening, hardware, and storefront glazing training., • Manual operated doors and dock equipment training for Industrial openings., • Hollow metal door, frame, and hardware training., • Strong Safety Culture., • Positive Work Environment., • Recognitions and Rewards., • Comprehensive health benefits, 401K match, 8 company paid holidays, and PTO., • Full-time shifts are available between Vortex business hours of 7:00 AM - 5:30 PM, Monday through Friday with potential overtime and on-call hours. Requirements: • High school diploma or equivalent., • 2+ years’ experience in the commercial door service industry is a plus., • Knowledge of various door types, brands, and hardware is a plus., • Ability to use hand and power tools effectively., • Excellent problem-solving and troubleshooting skills., • Proficiency in performing mathematical calculations involving fractions and reading a tape measure accurately for precise measurements and installations., • Good communication and customer service skills., • Attention to detail and a commitment to quality workmanship., • Knowledge of safety regulations and adherence to safety protocols., • Valid driver's license with a clean driving record, • Physical ability to lift up to 50 pounds., • Physical ability to continuously lift and bend, climb ladders up to 20’ in height, work on knees for extended periods of time and proficient operating power tools., • Additional ongoing training provided.

Job Description Field Technicians are expected to take direction and work side by side with Premise One Technicians, Lead Technicians, to successful completion of all projects. Responsibilities and Duties: * Be punctual for all scheduled shifts and meetings. * Always maintain a professional and clean appearance appropriate for the scheduled work environment. * Perform skilled technical work in the installation, maintenance, repair, modification, and testing of Security, Access Control, AV, and Infrastructure Cabling * Ability to understand blueprints, schematics, and line diagrams. * Understand troubleshooting philosophies and procedures. * Record notes and pictures in support of daily progress reports. * Installing support and pathway structures, ladder racks, j-hooks, cable trays, rack, cabinets, and fire penetrations. * Organizing and dressing backbone, closets, and labeling schemes. * Proficient at multiple cable terminations, jacks, patch panels, 66 and 110 blocks. * Proficient in testing cable & fiber. Qualifications: * 1+ year of relevant experience in AV, Security, Access Control, or Infrastructure Cabling * Must have basic hand tools to successfully perform a project. * Strong mechanical aptitude and troubleshooting skills. * Familiarity with industry tools and equipment * Must have basic hand tools to successfully perform a project. * Must be able to travel, as needed for assigned customer accounts. * Performs other duties as assigned. Skill Requirements: * Must possess at least a High School diploma or GED equivalency. * Must be proficient with Microsoft Office (Word, Excel, and MS Project) * Competent problem-solving ability with strong mathematical and communication skills * Must be willing to travel, as needed for assigned customer accounts. * Ability to handle physical workload as related to daily responsibilities. * Must be willing to work overtime. * Must be willing to work weekends. * Must be willing to work out of town. Interaction with Others: Must be able to follow Company policies; receive directions from others; work effectively with co-workers in a constructive and positive manner; listen to and objectively consider ideas and suggestions for improvement; keep others informed of work progress, deadlines, or other pertinent issues; address problems constructively to find acceptable solutions; keep commitments; and always respect the diversity of the Company's work force in actions, words and deeds. Experience: 1+ year of related experience and/or training desired. Language Skills: Ability to read and interpret documents, write correspondence, and communicate effectively with others and third parties, preferably, and sometimes exclusively, in English. Mathematical Skills: Competent ability to add, subtract, multiply and divide using whole numbers, common fractions, and decimals. Competent ability to compute rate, ratio, and percent and to draw and interpret bar graphs. Reasoning Ability: Competent ability to define problems, collect data, establish facts, and draw valid conclusions in situations where only limited standardizations exist. Certificates, Licenses, Registrations: Driving is a requirement for this position therefore A valid driver's license is required. The employee's motor vehicle record will be subject to the policies and provisions contained in the company's Fleet Safety Program. First-Aid and CPR Certification a plus Manufacturer Certifications a plus Industry Certifications a plus Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable employees with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand; walk; reach with hands and arms; climb or balance; stoop, kneel, crouch, squat or crawl; identify (colored) wires by sight; talk or hear; and use a ladder and possibly a scaffold, or A-frame. The employee frequently is required to sit. The employee must occasionally lift and/or move up to 25 pounds, and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus. It is required to Look at computer monitors for extended periods of time. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is occasionally exposed to moving mechanical parts; high, precarious places; fumes or airborne particles; toxic or caustic chemicals; outside weather conditions; risk of electrical shock; and vibration. The noise level in the work environment is sometimes loud. Safety: This position is deemed safety-sensitive and drug-free. Anyone considered for this position must adhere to the company’s safety policies, manuals, and other documents, including safety-related materials promulgated or required under applicable federal or state law. Equal Opportunity Employment: Premise One is an Equal Opportunity Employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. We do not discriminate on the basis of race, color, religion, sex, national origin, age, disability, genetic information, gender identity, sexual orientation, veteran status, or any other protected status in accordance with applicable federal, state, and local laws Compensation: * Pay Range: $21.00 to $26.00 an hour / Commensurate with Experience Powered by JazzHR FjGJl5BguT

Job Description Welcome to the unique industry of Construction Materials Testing & Inspections where the work you do is vital to construction and the growth of our communities! Your Role as a Field Technician: You will learn to inspect construction work, performed by contractors/trades, to check it complies with the requirements of the project specifications and building codes. ProTeX Field Technicians conduct a variety of construction inspections and testing each day at several different construction sites throughout the valley. Examples of Inspections and Testing Include: Post-Tension Foundation Inspections; Anchor Inspections; Drainage Inspections; Soil Testing, Concrete Sampling; Materials Sampling. Work Schedule: The Field Technician is a full-time position working upwards of 40 hours a week, Monday – Friday, and on a rotating Saturday schedule. We work when the contractors are working, which means some of our jobs start as early as 1:00 AM when concrete is being poured. The daily schedule, sent out the night before- between 5PM-6PM, provides the time of your first inspection the next day. You can expect to drive up to 200 miles a day, in a company-provided truck, as you move between job sites. Work Requirements: Must be able to work independently with little to no supervision. Lift up to 75 lbs., have a valid driver’s license, a clean driving record, and a desire to learn and grow with Arizona’s leading Geotechnical testing and inspection company. No Experience Required - at ProTeX we're Invested in YOU As a valued member of the ProTeX team, we will train you, mentor you and help you advance through, and pay for, certifications with ACI (American Concrete Institute), ATTI (Arizona Technical Training Institute), PTI (Post-Tensioning Institute), and more. As you gain experience and acquire certifications you will have the opportunity to advance from a Level I Technician up to a Level IV Senior Field Technician. BENEFITS: Starting pay is $18/hour + Self-Paced Pay Progressions + Paid Certifications Work truck- must complete training, to commute from home to the office/worksite Paid time off and 6 paid holidays/year Company Sponsored Medical, Dental, & Vision Insurance Plans 401k with a 50% Company Match PPE and Uniforms provided, including $100 to help purchase work boots and $25 for jeans Powered by JazzHR 7GyvD62bwl

Job DescriptionSalary: $23-$28 Description & Duties We are hiring a team member that will be our in-house construction lead. This person will help on job sites with the following tasks: • Carpentry, • Framing, • Drywall, • Painting, • Minor plumbing, • Minor electrical, • Doors / Windows, • Hang new doors, refinish, patch, repair & install hardware, • Drywall: patch, hang new sheets, tape, mud, skim & texture, • Tile installation (Walls, floors, backsplash, etc.), • Framing (Walls, niches, pony walls, etc.), • Painting (Interior), • Maintain accurate records on job completion Desired Skills & Experience • Ability and willingness to learn new skills, and computer programs, • Must have basic math skills, • Experience with hand tools and power equipment, • Ability to properly care for and use tools of trade, • Works well as part of a team, • Drywall texture matching is a must Physical Requirements • Prolonged periods of standing, climbing, bending, and kneeling, • Must be able to lift up to 50 pounds at a time, • Must be able to safely work with sharp tools or power equipment Schedule: • 8 hour shift, • Monday to Friday

Job DescriptionLocation: Nationwide Opportunities with WindshieldHUB About Us: WindshieldHUB is the leading name in the auto glass replacement industry, revolutionizing the service with our unparalleled infrastructure and dedication to excellence. We pride ourselves on creating a supportive environment that empowers our technicians to deliver superior customer service. At WindshieldHUB, we're not just offering a job; we're inviting you to become part of a legacy where your skills contribute to defining auto glass replacement standards. Why Join WindshieldHUB? • Unmatched Support: Benefit from our 15 specialized departments, including several that operate 24/7, ensuring you have the support you need whenever you need it., • Streamlined Operations: Our in-house marketing, scheduling, dispatch, part verification, and procurement processes allow you to focus on what you do best: the craftsmanship of auto glass installation., • Innovative Technology: Our large in-house Technology team equips you with cutting-edge tools and apps designed to simplify order management and installation processes, letting you concentrate on the quality of your work., • Broad Customer Reach: Access our extensive network of clients needing your expert services., • Competitive Pay: Choose between a steady hourly wage or per-installation earnings to suit your financial goals., • Flexible Scheduling: Enjoy work-life balance with schedules from Monday to Friday and optional Saturdays., • Perform high-quality windshield and auto glass installations., • Utilize your expertise in efficiently handling glass replacements and related equipment., • Professionals with at least 5 years of experience in auto glass installation., • Ownership of a complete set of tools for auto glass replacement., • Access to a personal vehicle (van or truck preferred)., • Advanced Technology: Get exclusive access to our proprietary iOS and Android apps for streamlined work order management., • Supplied Materials: We provide all necessary glass, moldings, parts, and materials., • Salary Range: $1,200 - $2,000 per week, based on experience and chosen compensation structure. How to Apply: For an opportunity to redefine your career with WindshieldHUB, please apply directly at WindshieldHUB Careers. Join Us: At WindshieldHUB, we're committed to your growth and success. Be a part of our journey to set new benchmarks in the auto glass replacement industry. We look forward to welcoming you to our team and shaping a brighter future together. Note: This position requires a minimum of 5 years of experience in auto glass installation. We are looking for dedicated professionals ready to elevate their careers with WindshieldHUB. Job Types: Full-time, Part-time Pay: $1,200.00 - $2,000.00 per week Schedule: Job Types: Full-time, Part-time Powered by JazzHR 3IxgbrAHce

Job Description For more than 20 years TruStop has been providing products and services across a wide range of industry segments including Oil & Gas, Filtration, Fluid Processing, Aerospace, Medical and Defense. We pride ourselves on our teamwork, employee empowerment, and together our commitment towards the highest standards in the manufacturing industry. From initial concept through design, manufacture and test, TruStop continues to be a premier manufacturer catering to many domestic and international customers with extremely high-quality demands and expectations. Scope: The mechanical and electrical assembly job involves building complex products that combine both mechanical and electrical components. Assemblers must be able to follow detailed instructions, read and understand blueprints, drawings, and wiring schematics, use hand and power tools, and perform precise work within given times. Key responsibilities include assembling, testing, and troubleshooting electromechanical systems, which often requires hands-on experience, technical training, and strong attention to detail. Responsibilities: · Assembly and wiring: Assembling mechanical parts, wire harnesses, and executing point-to-point wiring. · Component installation: Installing electrical components like motors, sensors, switches, and connectors. · Blueprint interpretation: Reading and interpreting technical documents, such as blueprints, schematics, and wiring diagrams. · Testing and troubleshooting: Performing tests to verify functionality and troubleshooting issues with both mechanical and electrical systems. · Quality control: Inspecting components and assemblies for quality and conformance to specifications. · Documentation: Completing required documentation, such as test results and traceability records. Knowledge, Skills & Abilities: The incumbent must have proficient knowledge in the following areas: · Mechanical and electrical aptitude: A strong understanding of both mechanical and electrical principles. · Technical literacy: The ability to read and interpret complex assembly drawings, diagrams, and schematics. · Tool proficiency: Experience using a variety of hand tools, power tools, and measuring instruments. · Manual dexterity: Excellent hand-eye coordination for precision assembly and soldering. · Computer skills: Familiarity with basic computer programs for documentation and following instructions. · Communication: Must be able to communicate in English (both written and verbal) as it relates to the job. · Environment: Must be adaptable to a changing work environment, completing demands and demonstrate ability to adapt to frequent changes, delays and/or unexpected events. · Experience: Must possess 1 to 2 years (minimum) of general mechanical and/or electrical assembly experience. The incumbent must also demonstrate the following skills: · Operate a forklift and lifting devices for movement of parts and other equipment as needed. · Team building skills. · Problem solving skills · Effective verbal and listening communication skills · Responsible for keeping equipment and work area clean and orderly. · Time management skills The incumbent must also demonstrate the following personal attributes: · Maintains standards of conduct · Be respectful · Possess cultural and political awareness and sensitivity · Be flexible · Demonstrate sound work ethics Physical Requirements: · Standing - ability to stand for extended periods · Walking - ability to walk for extended periods within the work area · Lifting and carrying - ability to lift/carry up to 50 lbs · Hand and finger dexterity - constant use of hands and fingers for manipulation of parts Working Conditions: TruStop is a busy facility located in Tempe, with roughly 47,000 sq/ft of A/C manufacturing/assembly space. The assembly team will have to serve several product lines and projects during any given time frame, and may be diverted from one project to another throughout the course of a work shift requiring excellent organizational and time management skills to efficiently complete the required tasks

Job DescriptionJob Opening: Mechanical Assembler - $20 to $23/hr Weekly PayOverview We're hiring experienced Mechanical Assemblers to put together central climate control units. You'll work with detailed blueprints and schematics, troubleshoot issues, and help train junior team members. This role is hands-on, collaborative, and key to maintaining high-quality production standards. Schedule • Monday- Thursday 6am- 4:30pmKey Responsibilities, • Assemble mechanical components and subassemblies with precision, • Read and follow technical drawings and specifications, • Diagnose and fix assembly and product issues, • Train and support junior assemblers, • Ensure safety and compliance across the team, • Recommend process improvements to boost efficiency, • Collaborate with engineers and other departments, • Conduct final product inspections and testing, • Manage parts inventory and maintain stock levels, • Operate and calibrate assembly equipment, • Follow lean manufacturing practicesQualifications, • 2+ years of assembly (large parts) or manufacturing experience, • Open to candidates with experience fixing cars or working in construction, • Skilled in reading technical documents and schematics, • Strong troubleshooting and problem-solving abilities, • Effective communication and teamwork skills, • Able to meet deadlines under pressureWhy Join Us?, • Competitive pay and full benefits (medical, dental, vision, 401K), • Modern, air-conditioned facility in Mesa, AZ with cutting-edge tech, • Paid time off and employee assistance program, • Career growth in a fast-paced, eco-friendly industry, • Inclusive, diverse workplace culture, • On-site electric vehicle charging stationsWork Schedule & Environment, • Monday–Thursday, 6:00 AM to 4:30 PM (Fridays off!), • 10 hours of holiday pay for Thanksgiving, Christmas Day, and New Year’s Day, • Must work the day before each holiday; paid the day after, • Physical requirements: lift/move up to 35 lbs, stand, kneel, climb ladders Pay and Benefits The pay range for this position is $20.00 - $23.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program, • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Mesa,AZ 85212. Application Deadline This position is anticipated to close on Nov 21, 2025. About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job DescriptionDescription: The Company Miner Ltd, an OnPoint Company, is an industry-leading service and equipment solutions provider with branch-based operations across the country. OnPoint Group is a fast-paced and ever-changing company and has been awarded the Best Managed Companies Award by Deloitte and WSJ for three years running, as well as having been named to the Inc. 5000 Fastest Growing Companies list for eight consecutive years! We believe in challenging the status quo and finding a better way for our customers, which is how we have grown into the company we are today. Miner drives down the cost of warehousing and materials management operations saving our customers revenue and time by understanding their business, finding efficiencies in their operation, providing faster systems repairs and delivering expertly executed scheduled maintenance. For more than 20 years, Miner has consistently delivered professional emergency maintenance service, equipment analysis and proactive preventative maintenance solutions to companies throughout North America. Miner solutions leave their customers more time to focus on their core business – not on the business of maintenance and materials management. Job Summary Our Dock & Door Technicians a.k.a. “Service Professionals” are the core of our preventative and emergency response services for our customers. You may call them a “technician”, but the role is more than using tools to fix broken items. Service Professionals are on the road, troubleshooting complex issues in places like commercial buildings, aircraft hangers, schools, fire/police departments, and much more. A Service Professional might spend an hour fixing a broken door for a hospital garage and an hour later they could be heading to a large warehouse to fix loading dock equipment. This role has unique access to see the inner workings of some of the largest operations in North America, and that’s just before lunchtime.Our people make us great and for us, that starts with finding the right person to fill our open positions. Anyone interested in this role should be able to answer yes to these questions: 1. Do I enjoy variety and complexity?, 2. Does the idea of autonomy and independence excite me?, 3. Can I have fun, while keeping it safe and efficient?, 4. Am I looking for a career family and not just a job?, 5. Would my friends and family describe me as a “tinkerer”? If you answered yes to those questions, we invite you to keep reading and hit that apply button! Room for Growth The exciting news about being a Service Professional is that you can start where your current skills best align with the level of work. Miner offers four levels of Service Professionals so that you can gain, advance, or refine your dock and door abilities. • Apprentice Level (Level I) – best for candidates who have a passion for learning and a willingness to train. Experience working in any related field is a plus, but most importantly an understanding of mechanics and the ability to fix a variety of products is needed., • Service Professional Level (Level II) – this is the sweet spot for anyone who has at least a year of experience in a related field and knowledge of the basic concepts of electrical and hydraulic troubleshooting. Service professionals are well attuned to customers and can communicate effectively while in the field., • Senior Level (Level III) – possesses experience in basic repairs in the AED, Highspeed, or gate fields with a proficient understanding of hydraulic and electrical troubleshooting. Candidates will typically have 4 years of experience in this field. What You’ll Do Service Professionals are responsible for hands-on customer care. They troubleshoot, service, inspect, install, and repair industrial equipment of all shapes and sizes. There is paperwork involved (what job doesn’t have it), as a Service Professional there is expectation that work orders be maintained on paper and digitally. The role operates a vehicle regularly to visit different customer sites and plays a major part in maintaining safety and OSHA compliance for the Company. Requirements: What We Look For Qualified candidates answered “Yes” to all of our questions AND will have in their toolbox, the following skills: • 2-4 years of relevant experience…we care more about how you execute, the quality of your work product, and if you can make an impact to Miner customers., • Ability to repair industrial facilities, including doors, loading docks, and dock-leveler’s., • Ability or a desire to learn welding, steel fabrication, and electrical. If you have Hydraulic and Pneumatics experience, awesome, call it out on your submission so we know where to find you!, • Ability to take direction and work independently while on the road for hours each day., • Strong communication, problem solving, and analytical skills. The ability to think through complex situations critically is a must., • Technical school training and OEM certifications are desired but not required., • Ability to work a flexible schedule, with nights, weekends, and Holidays. Overtime opportunities are available, so a willingness to work is what we need. We thought you’d never ask. Please view our benefits page to learn more about the Benefits to all Miner employees. The benefits listed are subject to change at any time.Please speak with an HR Representative for details. In the case of conflict between the information listed and the official plan documents, the plan documents will always govern. In addition to those benefits, Service Professionals can look forward to: • Competitive pay, including quarterly bonus incentives, • Uniform and boot allowance, • Training and the opportunity for growth, • Company issued truck for work travel, can be taken home as well, • Autonomy and independence, • Competitive PTO and Paid Holidays Miner Ltd. considers applicants for all positions without regard to race, color, religion, creed, gender, national origin, age, disability, genetic information, marital or veteran status, or any other legally protected status. Disclaimer This job posting may also appear on other job boards. Be aware that job postings on external job boards may not be authorized by OnPoint Group and may contain inaccurate or incomplete information. While we encourage you to explore these opportunities, please be aware that we do not endorse or control the content on these external sites. We are not responsible for the accuracy, completeness, or reliability of information posted on other job sites, and we are not liable for any damages or losses that may arise from your use of that information. You are solely responsible for verifying the accuracy and completeness of any information you obtain from external sources. Applicants should refer to OnPoint Group’s Careers Page for the most accurate job posting and reach out to the Company with any questions about a job posting. Salary Range The pay range noted represents the company’s good faith minimum and maximum range for this role at the time of posting. The actual compensation offered to a candidate will be dependent upon several factors, including but not limited to experience, qualifications, and geographic location. Employees may be eligible for additional incentive pay.

Job DescriptionJob Title: Install Technician Job Description The Install Technician will assist in the installation and support of heating solutions within a semiconductor manufacturing environment. This role involves installing and maintaining heat trace materials on various process lines, such as vacuum pipes and exhaust lines, ensuring proper functionality and insulation. Responsibilities • Install heat trace material wrapping on process lines, including vacuum pipes and gas lines., • Conduct tool installation for semiconductor equipment., • Run wiring and troubleshoot basic electrical issues., • Handle and operate equipment during the installation process., • Install insulation and inspect the application of insulation tape over trace material., • Troubleshoot and assist with start-up processes., • Work in confined spaces when necessary.Essential Skills, • 1 year of technical or mechanical equipment assembly experience., • Electrical aptitude with installation or troubleshooting experience., • Ability to work in confined spaces and lift up to 50 pounds., • Completion of OSHA 10 training.Additional Skills & Qualifications, • Experience in electrical, mechanical, and HVAC maintenance., • Hands-on experience with tools and construction labor.Why Work Here? The company offers comprehensive benefits when transitioned to a permanent role, including tuition reimbursement and a 401k plan with a company match. There are significant growth opportunities, with the potential to advance to Field Services Tech 1 and beyond, leading to increased pay and responsibilities. Work Environment The role is based onsite at a semiconductor facility in Chandler, with 30% of work conducted in the fab and 70% in the sub fab. The schedule consists of three shifts with alternating teams, including 4-10 hour days from Monday to Thursday and Wednesday to Saturday, plus a third team with a Monday to Friday 8-hour shift. Overtime is mandatory, and teams typically consist of 2-3 people. The initial contract period is 6-9 months, with the possibility of transitioning to a full-time position. Job Type & Location This is a Contract to Hire position based out of Chandler, AZ. Pay and Benefits The pay range for this position is $23.00 - $23.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program, • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Chandler,AZ. Application Deadline This position is anticipated to close on Dec 4, 2025. About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job DescriptionJob Summary We are seeking an experienced Service Plumber to join our growing team. The ideal candidate will be skilled in diagnosing, repairing, and installing all aspects of plumbing from faucets, sinks, and drainage systems to tankless water heaters and water softeners for residential and commercial establishments. The technician will need have excellent communication skills in order to explain solutions to our customers. Responsibilities and Duties • Diagnose, install and repair plumbing fixtures, pipes, and water drainage systems., • Ensure that local code regulations are met., • Replace any products or equipment that do not meet current safety regulations., • Troubleshoot and find the cause of various plumbing/equipment malfunctions., • Communicate effectively with customers, providing clear explanations and recommendations., • Work independently and efficiently while maintaining a clean and organized work area. Qualifications and Skills • Minimum of 2-5yrs provable plumbing service experience., • Strong analytic and problem-solving skills., • Good communication skills, both oral and written., • Ability to work together as part of a team along side other technicians and team members., • Good manual dexterity, • Valid driver's license and clean driving record Specific Expectations • Be on time, • Dress professionally, • Act Professional, • Be a team player, • Be coachable, • Be polite and respectful to our customers, • Competitive hourly wage (based on experienced)., • Company provided van, iPad and uniforms., • Paid holidays and vacation., • Career growth opportunities., • Health insurance options. E04JI802phii407h7pp