Trabajos carpenter en Chandler, ArizonaCrear alertas

Job DescriptionSalary: Important: This is a talent pool / evergreen posting, not a current open position. We review candidates in this pool as new positions open. If your experience matches a future opening, well reach out to you directly. Our main office is located in Chandler, AZ but we operate throughout the southwest and may need candidates throughout AZ, NM, TX, and beyond. 1) Purpose of Role Support concrete and civil carpentry tasks safely and accurately. Learn to read drawings/specs, follow the workflow for formwork and finish tasks, maintain clean workstations, and assist with basic pouring and finishing under supervision. 2) Scope & Decision Rights Assist with measuring, cutting, and assembly tasks; support setting forms and concrete placement/finishing under direction; uphold housekeeping standards. 3) Essential Duties and Standards Owns: Keeping workstations clean with proper housekeeping and tool control; staging materials to support safe production. Using hand and power tools safely to assist with formwork, rebar placement, and concrete tasks as directed. Reading and following basic drawing/spec notes with coaching; verifying measurements and layout marks. Assisting with basic concrete pours and finish work (edge, float, cure) under supervision. Participating in JSAs and following safe practices for scaffolding, shoring, and silica controls. Providing inputs to foreman for daily documentation (photos/notes) in Procore as directed. Supports: Carpenter 2/journeymen with material prep, form stripping, and rework prevention through good housekeeping. Survey/layout by protecting stakes and communicating discrepancies in measurements or elevations. Safety team by following PPE, housekeeping, scaffolding, shoring, and silica procedures. Recommends/Prepares: Material/tool needs to execute tasks safely and efficiently. Simple improvements to workstation organization and cleanup that reduce rework or delays. Notes on drawing/spec questions to clarify before task start. Escalates: Unclear drawings/specs or measurements that dont match field conditions. Unsafe conditions (unstable forms/shoring, scaffold issues, silica exposure) or defective tools. Concrete quality issues (mix, slump, curing) or damage to forms/stakes that affect tolerance. 4) Critical Competencies (must demonstrate) Construction domain: Basic formwork and rebar tasks; concrete placement and finish fundamentals; safe hand/power tool use; measurement and layout basics; reading drawings/specs with coaching; Job Safety Analysis; housekeeping; scaffolding/shoring awareness; Hand/power tools for carpentry; formwork hardware; basic finishing tools; Procore exposure for daily photos/notes. Information governance: Provide inputs to daily documentation as directed; follow drawing/spec revisions communicated by the lead. Productivity tools: Mobile field apps; tape/levels/squares; simple templates/jigs for repeatability. Mindset: Communication; adaptability; detail oriented; time management; problem solving; team orientation. 5) Qualifications 618 months experience or training in civil carpentry or concrete work. Ability to use hand/power tools safely and follow instructions on formwork, rebar, and concrete tasks. Basic ability to interpret drawings/specs with coaching; accurate measurement and layout assistance. Understands housekeeping, scaffolding/shoring awareness, and silica controls. OSHA 10 and First Aid; Silica Awareness. Valid drivers license. 6) Performance Measure Buckets Safety: JSA participation; PPE/housekeeping; scaffold/shoring and silica practices; incident/near-miss reporting. Quality: measurement accuracy; formwork/finish workmanship; rework reduction; protection of stakes/layout. Productivity: task completion to plan; material staging; minimal idle/wait time; cleanup standards. Documentation & teamwork: timely inputs to foreman; communication; tool care and accountability.

Job DescriptionSalary: About Caliente Construction: Founded in 1991, Caliente Construction is a Women-Owned Business Enterprise providing a full range of commercial construction services to clients throughout the Western United States. Caliente is an award-winning, commercial general contractor that is continually recognized for our impeccable safety, exceptional services, and sincere commitment to our community. Why Work Here? At Caliente Construction, Inc. we offer a variety of benefits including medical, dental, vision, and retirement savings plans with a 401K match. We firmly believe in the holistic health of our team and offer opportunities for professional development, personal growth and strongly believe in giving back to our community through various non-for-profit events we participate in throughout the year. This position supports a variety of commercial construction projects and works closely with superintendents and other trades to deliver high-quality work safely and efficiently. Responsibilities • Perform rough and finish carpentry on commercial construction projects, • Assist with layout, framing, and trim carpentry, • Install doors, frames, hardware, millwork, and specialty items as needed, • Read and interpret construction drawings and specifications, • Safely operate hand tools, power tools, and basic construction equipment, • Maintain a clean, organized, and safe jobsite, • Assist other trades and perform general labor duties as required, • Follow company safety policies and OSHA regulations Qualifications • Previous commercial carpentry or construction experience preferred, • Basic knowledge of carpentry tools, materials, and methods, • Ability to read tape measures and understand basic construction drawings, • Strong work ethic, reliability, and attention to detail, • Ability to lift 50+ lbs and work in varying weather and jobsite conditions, • Valid drivers license and reliable transportation required, • OSHA 10 certification a plus (or willingness to obtain) A resume is not required, however, please provide a list of previous jobs and years of experience at relevant trades. Caliente Construction provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.

Job DescriptionSalary: $25.00 - $30.00 DOE Position Summary: The Commercial Trim Carpenter is responsible for designing, building, installing, and repairing structures, fixtures, furniture, and other items using different types of materials including wood and fiberglass. This position works in diverse settings to produce steady and functional infrastructure and products. Essential Responsibilities: • Read blueprints, drawings, and sketches to fully grasp requirements., • Take measurements and calculate the size and amount of materials needed for each job., • Cut, shape, and smooth wood and other material (e.g. fiberglass, plastic, drywall) according to measurements., • Build window frames, doors, staircases, etc. by using raw materials or pre-constructed items., • Lay out flooring, roofing, or drywall ensuring they are leveled and compatible., • Carve and assemble furniture, cabinets, shelves, and other items and install them where designated., • Build scaffolding and other construction structures., • Replace panes of glass, ceiling tiles, and doors., • Install partitions, doors, and windows., • Check all work along the way to ensure it's up to code and specifications. Leadership Skills and Characteristics: • Reliable and responsible for quality work., • Effective time-management skills., • Team collaboration skills., • Able to work independently with minimal supervision and multi-task in a fast-paced environment. Immediate Supervisor: This position reports to the Doors/Hardware Superintendent. Required Education, Skills, and Experience: • Proven experience as a Trim Carpenter., • Hands-on experience in working with carpentry materials., • Excellent understanding of carpentry techniques and methods of installation and construction., • Proficient in using electrical and manual equipment and measurement tools (powered saws, hammers, rulers, etc.), • Ability to read technical documents and drawings., • Thorough knowledge of safety procedures and legal regulations and guidelines. Note: In accordance with Federal Law, Bjerk Builders, LLC does not discriminate on the basis of age, sex, color, race, national origin, religion, disability, marital status, pregnancy, sexual orientation, gender identity or expression, ancestry, political belief or activity, status as a veteran, or any other protected characteristic as established by law.

Job DescriptionDescription: Job Title: Siding Installer Carpenter - contract position 1099 Subcontractor position Job Location: Tucson, AZ Independent contractor About Us: Tacheny Exteriors is a fourth-generation, family-owned home remodeling company specializing in roofing, siding, gutters, windows & doors, soffit & fascia, and decks. With decades of excellence behind us and a growth-focused future ahead, we take pride in craftsmanship, professionalism, and creating a positive experience for our customers and team members alike. We are looking for 1099 subcontractor crew members who are for motivated, skilled, and reliable individuals who want to grow with a company that values quality, teamwork, and long-term success. Key Responsibilities: • Execute high-quality exterior remodeling projects, including installations and repairs of siding., • Collaborate with team members to ensure projects are completed on time and to specifications., • Maintain a clean and safe work environment., • Communicate effectively with clients and team members regarding project progress and any issues that arise. Skills and Qualifications: • Proven experience as a siding installer or in a similar role., • Strong knowledge of siding materials and installation techniques., • Ability to read and interpret blueprints and technical drawings., • Excellent problem-solving skills and attention to detail., • Strong communication and teamwork abilities., • Valid driver's license and reliable transportation. We offer competitive pay, If you are a dedicated professional looking to join a reputable company, we encourage you to apply. Requirements: Required Skills/Abilities: • 3+ year of experience in construction or exterior remodeling is required., • Basic knowledge of hand tools and power tools, • Ability to lift 50+ lbs and work outdoors in various weather conditions, • Reliable transportation and a valid driver’s license, • Strong work ethic, punctuality, and attention to detail, • Positive attitude and ability to work as part of a team Physical Requirements: • Prolonged periods standing, climbing, bending, and kneeling., • Must be able to lift up to 50 pounds at a time., • Must be able to safely work with sharp tools or power equipment., • Must be able to work in a variety of weather conditions and terrains., • Must have manual dexterity, a good sense of balance, and excellent hand-eye coordination.

Job Description The Craftsman, Finish Carpenter, Custom Fabrication role involves interpreting detailed blueprints and customer specifications to create precise, high-quality finished products. This position requires skilled craftsmanship in cutting, shaping, and joining various materials to meet rigorous quality standards and client expectations. Responsibilities • Read and interpret technical drawings, schematics, and customer specifications., • Measure, mark, cut, bend, and shape raw materials into required forms., • Join components using welding (TIG, MIG, Stick), soldering, or mechanical fasteners., • Inspect finished pieces for defects, dimensional accuracy, and client expectations. Preferred Qualifications • 5+ years in carpentry or fabrication.Company DescriptionWe Are Airstream is a family owned Airstream dealership. We are located at 1375 S Arizona Ave and the 202 Loop. Apply online or stop by for a same day interview.We Are Airstream is a family owned Airstream dealership. We are located at 1375 S Arizona Ave and the 202 Loop. Apply online or stop by for a same day interview.

Job DescriptionDescription: Job Title: Repair and Maintenance Carpenter Company: Tacheny Exteriors Location: Tempe, AZ Job Description: Tacheny Exteriors is seeking a skilled Repair and Maintenance Carpenter to join our team. The ideal candidate will have experience in carpentry and a strong commitment to quality workmanship. This role involves performing repairs and maintenance on various exterior structures, ensuring safety and durability. Key Responsibilities: • Conduct repairs and maintenance on roofing and exterior structures, • Collaborate with team members to assess project needs and timelines, • Follow safety protocols and maintain a clean work environment, • Utilize various carpentry tools and equipment effectively, • Communicate with clients to understand their needs and provide solutions We offer a competitive salary and comprehensive benefits package including: • Health Insurance w/HSA, • Dental Insurance, • Vision Insurance, • Heatlhiest you online virtual appointments free, • Voluntary Life Insurance, • Accident Insurance, • Critical Illness Insurance, • Short term disability, • 401k w/match, • Generous PTO, • 7 paid holidays per year We offer a competitive salary and benefits package. If you are a dedicated carpenter looking to contribute to a dynamic team, we encourage you to apply. Requirements: Skills and Qualifications: • Proven experience as a carpenter, preferably in repair and maintenance, • Strong knowledge of carpentry techniques and materials, • Ability to read and interpret blueprints and technical drawings, • Excellent problem-solving skills and attention to detail, • Strong communication and teamwork abilities, • Valid driver's license and clean driving record Education and Experience: • High school diploma or equivalent and two years of carpentry experience; OR, • Completion of vocational or apprenticeship program in carpentry/building trades; OR, • Three years of experience in carpentry under the supervision of a skilled carpenter; OR, • A satisfactory combination of experience required. Physical Requirements: • Prolonged periods standing, bending, stooping, and reaching., • Must have a full range of physical motion as required to properly operate manual and electric power tools., • Must have balance necessary to traverse and work on scaffolding and roofs., • Will work in a variety of environments and weather with exposure to dust, fumes, and chemicals in both indoor and outdoor construction and carpentry., • Must be able to regularly lift and carry 50 pounds and 100 pounds occasionally.

Job Description Trim Carpenter Responsibilities · Install doors, trim, crown, T&G, etc. in custom homes and commercial buildings · Focus on high-quality work · Travel to job sites primarily in North Scottsdale and Paradise Valley Trim Carpenter Qualifications • 2+ years’ experience in fine trim carpentry, • Have own tools and vehicle, • Dependable, • Pass E-Verification process and drug screeningCompany DescriptionDoor Works is a unique, versatile, full-service wood products manufacturer specializing in custom handcrafted doors, moulding, trim, and ceiling treatments. Since 1997, Door Works has supplied the finest architects, designers and builders with distinctive, handcrafted products combined with exceptional service and quality installation.Door Works is a unique, versatile, full-service wood products manufacturer specializing in custom handcrafted doors, moulding, trim, and ceiling treatments. Since 1997, Door Works has supplied the finest architects, designers and builders with distinctive, handcrafted products combined with exceptional service and quality installation.

Aerotek - - Responsibilities: Perform concrete work including slabs, walls, and structural elements; Set, install, and remove formwork; Finish concrete surfaces, including architectural concrete; Assist with material handling and site cleanup; Follow all safety procedures.

Minimum five years' carpenter experience. Experience with and Working knowledge of tools, materials, methods and safe working practices of the carpenter trade. Carpenters work inside classrooms, hallways, and offices as well as outside on playgrounds, athletic facilities, and school exteriors.

Carpenter/h2pA skilled carpenter involved in high level millwork that can be woodwork, casework, and/or ornamental metalwork. Preferred Qualifications/ppEducation/Experience/pulliExperience in casework, plastic laminate, and architectural millwork/li/ulpKnowledge/Skills/pulliAbility to read blueprin

The Commercial Trim Carpenter is responsible for designing, building, installing, and repairing structures, fixtures, furniture, and other items using different types of materials including wood and fiberglass. Proven experience as a Trim Carpenter.

Carpenters for commercial projects in the Tempe, AZ area. All Carpenters are scheduled 40+ hours a week. Ultimate Journeyman Carpenter Requirements.

Job Title: Siding Installer Carpenter - contract position.

SUMMARY Mortenson is currently seeking a Carpenter I that will be responsible for the construction and repair of wood and wallboard fixtures in compliance with local building codes and general construction principals.

Minimum five years' carpenter experience. Experience with and Working knowledge of tools, materials, methods and safe working practices of the carpenter trade. Carpenters work inside classrooms, hallways, and offices as well as outside on playgrounds, athletic facilities, and school exteriors.

Handyman is known for exceptional service, quality work, and our "Done Right Promise.We stand behind this commitment because we only hire the best and work hard to take care of all our team members.Handyman team, you get so much more than a job you get a career you can be proud of, and the support o

Are you an experienced concrete carpenter who takes pride in precision, craftsmanship, and contributing to large-scale construction projects? Join a team working on commercial and industrial builds across the Valley, where your skills will directly shape durable, high-quality structures. As a Concre

Role Summary The Carpenter 3 will be responsible for performing complex carpentry tasks in one or more areas of concrete carpentry or finish carpentry on a variety of construction projects including new construction, renovations, and other project types. This position may also be responsible for sup

The foreman is expected to self-perform work while coordinating a small crew as needed, adapting daily to jobsite priorities and project conditions. Working Foreman / Lead Carpenter. Big-D is looking for a dynamic Foreman/Lead Carpenter.

Repair And Maintenance Carpenter. Tacheny Exteriors is seeking a skilled Repair and Maintenance Carpenter to join our team. If you are a dedicated carpenter looking to contribute to a dynamic team, we encourage you to apply.

Job DescriptionDescription: Job Title: Siding Installer Carpenter - contract position 1099 Subcontractor position Job Location: Flagstaff Independent contractor About Us: Tacheny Exteriors is a fourth-generation, family-owned home remodeling company specializing in roofing, siding, gutters, windows & doors, soffit & fascia, and decks. With decades of excellence behind us and a growth-focused future ahead, we take pride in craftsmanship, professionalism, and creating a positive experience for our customers and team members alike. We are looking for 1099 subcontractor crew members who are for motivated, skilled, and reliable individuals who want to grow with a company that values quality, teamwork, and long-term success. Key Responsibilities: • Execute high-quality exterior remodeling projects, including installations and repairs of siding., • Collaborate with team members to ensure projects are completed on time and to specifications., • Maintain a clean and safe work environment., • Communicate effectively with clients and team members regarding project progress and any issues that arise. Skills and Qualifications: • Proven experience as a siding installer or in a similar role., • Strong knowledge of siding materials and installation techniques., • Ability to read and interpret blueprints and technical drawings., • Excellent problem-solving skills and attention to detail., • Strong communication and teamwork abilities., • Valid driver's license and reliable transportation. We offer competitive pay, If you are a dedicated professional looking to join a reputable company, we encourage you to apply. Requirements: Required Skills/Abilities: • 3+ year of experience in construction or exterior remodeling is required., • Basic knowledge of hand tools and power tools, • Ability to lift 50+ lbs and work outdoors in various weather conditions, • Reliable transportation and a valid driver’s license, • Strong work ethic, punctuality, and attention to detail, • Positive attitude and ability to work as part of a team Physical Requirements: • Prolonged periods standing, climbing, bending, and kneeling., • Must be able to lift up to 50 pounds at a time., • Must be able to safely work with sharp tools or power equipment., • Must be able to work in a variety of weather conditions and terrains., • Must have manual dexterity, a good sense of balance, and excellent hand-eye coordination.

Job DescriptionBenefits: • Employee discounts, • Free food & snacks, • Opportunity for advancement, • Paid time off, • Training & development Installer Closets by Design is a nationally recognized leader in home organizing systems. We design, manufacture, and install a complete line of custom closets, home office furniture, media systems, wall-beds, garage cabinetry and more. We desire motivated, organized, caring individuals who have a passion to provide outstanding craftsmanship and superior customer service. Job Responsibilities We are currently seeking an enthusiastic and motivated individual to immediately fill the position of Carpentry/Installer. Carpentry/Installers are responsible for the installation of products in a safe, high quality, productive, and profitable fashion. Demonstrate a commitment to client satisfaction by communicating what is necessary in a genuinely friendly and professional fashion. Operate company vehicles, tools, etc. in a safe manner. Benefits • Listed pay of $22.50/hour, with commission recommended to make more., • Direct career track to Lead with a pay increase., • Paid training and ongoing professional development., • Paid holidays and paid time off., • Monday through Friday, no weekends, no required overtime., • Tools and equipment are provided., • Open door policy with the owner.Responsibilities, • Help install custom closets and cabinets at customer homes., • Follow basic drawings or instructions to assist with setup., • Use hand and power tools safely (training provided)., • Measure, cut, and fit materials with guidance from lead carpenter., • Assist with mounting shelves and leveling parts., • Keep job sites clean and organized during and after installation.Job Requirements, • Customer oriented, friendly and enthusiastic., • Reliable, punctual with good work ethic., • Possess and maintain current drivers license., • Good driving record., • Operate company vehicle in safe manner., • Closet, garage, office installation experience preferred., • Strong verbal and written communication skills., • Strong personal organization skills.Closets by Design - Overview, • Closets by Design is a nationally recognized leader in home organizing systems., • We design, manufacture, and install a complete line of custom closets, home office furniture, media systems, wall-beds, garage cabinetry and more.Closets by Design - Our Values, • Serve Others, • Be a Problem Solver, • Trust the ProcessWe respond to candidates promptly and hire within a week.

Mortenson is currently seeking a Carpenter I that will be responsible for the construction and repair of wood and wallboard fixtures in compliance with local building codes and general construction principals.

Canyon Building & Design, LLC seeking an experienced Professional Commercial Construction Superintendent.Responsibilities: The Superintendent, in partnership with the Project Manager, is responsible for the overall success of the construction project, by effectively managing the jobsite including su

Sun Eagle Corporation is a 47-year old General Contractor.We build commercial buildings throughout Maricopa County.We are presently interviewing for a COMMERCIAL BUILDING SUPERINTENDENT for various commercial, municipal and government projects.Preference will be given to applicants who have NEW BUIL

Aerotek - JobID: JP-005850592 [General Laborer] As a General Laborer at Aerotek, you'll: Frequently lift up to 50 pounds unassisted; Have a basic understanding of how to use hand tools; Have reliable transportation.

Concord Hospitality - 1855 South Cooper Road - Responsibilities: Perform scheduled preventative maintenance in guest rooms, meeting rooms, and public spaces; Paint interior and exterior surfaces, repair damaged walls and drywall, replace windows, hang cabinets, repair kitchen counters, install carpe

Aerotek - - Responsibilities: Read and interpret blueprints, engineering drawings, schematics, and specifications to ensure accurate assembly; Coach and train lower-level assemblers and mentor junior team members; Perform final quality inspections and functional testing; Maintain accurate inventory

Verstela - - Responsibilities: Assemble prototype, pre-production, and production EV kits; Work with hand & power tools (crimpers, heat guns, wire strippers, pinning machines & more); Follow drawings and work instructions to build high-quality components; Support continuous improvement on R&D build

Aerotek - - Responsibilities: Execute complex assembly tasks, including advanced mechanical assembly of components and subassemblies on an assembly line; Read and interpret detailed blueprints, engineering drawings, schematics, and specifications to ensure correct assembly of all components; Perfor

Specialization in Avionics Required.Looking for AMTs with a rotor background, but open to 7+ years of heavy aircraft maintenance experience.Responsible for performing maintenance, repairs, inspections, and alterations of Company operated aircraft and articles as assigned in accordance with Air Metho

From inception to commissioning and beyond, we offer complete mechanical contracting and energy services solutions.Our expertise includes design-assist, HVAC, plumbing, sheet metal, and process piping construction for semiconductor, data center, healthcare, biotech, water treatment, power generation

Aircraft Maintenance Technician.Specialization in Structures Required.Looking for AMTs with a rotor background, but open to 7+ years of heavy aircraft maintenance experience.Responsible for performing maintenance, repairs, inspections, and alterations of Company operated aircraft and articles as ass

Aerotek - - Responsibilities: Execute complex assembly tasks, including advanced mechanical assembly of components and subassemblies on an assembly line.Read and interpret detailed blueprints, engineering drawings, schematics, and specifications to ensure correct assembly of all components.Perform

General Maintenance Technician III.Typical work schedule will vary based on business demand.General Maintenance Technician III (GMT III).This role supports day-to-day facility operations by responding to work orders, completing preventive maintenance, and addressing basic building repair needs while

Nesco Resource - - Responsibilities: Read, interpret, and follow blueprints and job instructions to accurately assemble product; Perform in-process checks to ensure products meet internal and customer quality standards; Maintain a clean and safe work area; Follow quality standards and safety proced

Aircraft Maintenance Technician.Specialization in Aircraft Systems Required.Looking for AMTs with a rotor background, but open to 7+ years of heavy aircraft maintenance experience.Responsible for performing maintenance, repairs, inspections, and alterations of Company operated aircraft and articles

Aerotek - - Responsibilities: Wire harness assembly with Mil-spec connectors; Solder small components on to PCBs and cables to connectors; Work under a microscope; Use small hand tools for electronic work; Sit at workstation for the full shift.

Verstela - - Responsibilities: Perform through-hole, SMT, and jumper wire soldering using a soldering iron.Assemble and inspect components using hand tools, presses, and microscopes.Follow detailed work instructions, safety standards, and J-STD-001 specifications.Operate specialized machinery inclu