Offres Construction & Trades à San Diego, California - Page 12Créer des alertes d'emploi

Job Description Labor One is hiring Journey-Level Sheetmetal Fitters for a Ship Repair project in San Diego, California. Shipyard experience is required. Please contact our team for more information! Cell: (619)484-7267 ; (619)657-5507 or (858)717-1672 Walk-ins Accepted! Apply today! 1625 Hoover Avenue National City, CA 91950 Office Hours: 8:00 AM-5:00 PM General Information Job Description:This position is responsible for performing, with minimal supervision, sheet metal repairs and installation on maritime vessels such as Navy Ships, Military Sealift Command ships, and commercial vessels. Repairs and installation include shipboard and shop tasks required to plan, layout, fabrication, and assemble various sheetmetal structures throughout the ship. The position requires a comprehensive understanding of ship terminology, blueprint reading, measurements, and the ability to interpret job specifications and drawings. The qualifications and general capabilities listed below are representative of the knowledge, skill, and ability desired by the shipyard. QUALIFICATIONS AND EXPERIENCE 1. Must be able to comprehend instructions, drawings, and general correspondence., 2. Must have a comprehensive understanding of ship repair terminology and ship compartment location nomenclature., 3. Must be physically and medically capable of wearing all required personal protective equipment (PPE) required for the job as prescribed under OSHA standards. PPE includes hard hat, safety glasses, steel toe shoes, goggles, respirator, safety harness, safety line, flotation gear, etc.), 4. Must possess the ability to write comprehensive Condition Found Reports (CFR) describing the material condition of the ship as it pertains to the assigned work item, and provide recommended corrective action., 5. Must be able to effectively confer job related information to the structural supervisor, improvers, and helpers., 6. Must be able to read and interpret structural drawings, sketches, and specifications., 7. Must be able to interpret appropriate sections of NAVSEA, ABS, Coast Guard standards and manufacturer's tech manuals., 8. Must have experience repairing and installing shipboard habitability spaces including: berthing equipment; galley equipment; ventilation ducting (heating and cooling); and joiner doors in accordance with drawings, specifications, and sketches., 9. Must understand the principle of balancing air systems including taking proper readings and documenting the results., 10. Must have experience using hand and power tools and understand the operation of fabricating machines such as shears, brakes, presses, forming rolls and routers., 11. Must have experience tack welding using SMAW or GMAW., 12. Must be able to add, subtract, multiply, and divide whole numbers, fractions, and decimals. Must understand the US customary and metric measurement systems., 13. Six (6) years of related experience, three (3) of which were in the maritime environment. DUTIES AND RESPONSIBILITIES 1. Must comply with OSHA standards and the shipyards best safety practices., 2. Arrive at the designated work site at the assigned time and end the shift as directed by the schedule and your supervisor. 3. Work shifts and overtime as assigned., 3. Keeping the work area clean and safe at all times, especially at the end of the shift., 4. Complete daily work assignments and provide status of unfinished work for shift turnover., 5. Provide quality work and Objective Quality Evidence (OQE) as required by the work specifications or assigned by the supervisor., 6. Comply with the Company's “Non-Discrimination and Anti-Harassment Policy” which expects that all relationships among persons in the workplace will be businesslike and free of bias, prejudice, and harassment., 7. Carry out written and verbal instructions., 8. Resolve unexpected events related to your assigned task in a professional manner. WORK ENVIRONMENT The working environment in the shipyard varies from a normal office conditions to working outside where precipitation, wind, extreme cold, and extreme heat and high humidity are not unusual. When working inside of vessels the environment may be smoky, hot or cold, and have low levels of illumination may be present. There are heavy equipment and power tools operating almost at every location. Depending on the type of work available, reasonable accommodation may be made to enable individuals with disabilities to perform the job requirements. Personnel can expect to work in a variety of spaces from confined areas accessible only by manholes to high platforms accessible only by scaffolding or ladders. Work may also be accomplished using mechanical lifts as working platforms. The noise level in the shipyard environment is usually loud, especially inside of vessels. The noise encountered in the shop is generally low to moderate. The wearing of appropriate personal protective equipment is mandatory. There is always the potential of falling objects and personnel are occasionally exposed to moving mechanical parts during work. Appropriate PPE must always be worn. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Must be able to tour all vessels, piers, docks and work sites. While performing the duties of this job, the employee is regularly required to: stand; walk; use hands to finger, handle or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch or crawl; and talk or hear. The employee is occasionally required to sit. SPECIFIC PHYSICAL REQUIREMENTS: May be required to demonstrate any or all requirements. 1. Lift/push/pull 50 lbs to 100 lbs on an occasional basis (0-33% of the day)., 2. Lift/push/pull up to 20 lbs on a frequent basis (34-66% of the day)., 3. Perform prolonged standing (2-3 hours). Bend, squat crouch, crawl and kneel., 4. Climb in a safe manner (climbing, includes stairs, scaffolding, ladders and ramps)., 5. Work at a variety of levels and positions (ex. Waist, eye, above head)., 6. Good balance while working on uneven surfaces and maneuvering obstacles., 7. Sufficient handgrip and coordination to carry and operate tools and equipment., 8. Access work areas through 18” x 36” openings and work in confined spaces for prolonged periods of time (33-66% of the day)., 9. Respond to visual, verbal, and audible sounds/commands., 10. Work at heights above 12' from ladders, scaffolding, and manlifts., 11. Fully extend the arm while reaching overhead, reaching out, reaching to the side and reaching down., 12. Perceive attributes of an object/material such as size, shape, temperature and texture by means of receptors in the hands and fingers., 13. Turn head from side to side and about on the vertical axis. Turn body at the waist from side to side and about the vertical axis. 2nd Shift 40 hrs per week/ OT available per HM approval Labor One Staffing is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other basis protected by local, state, or federal law.

Job Description We are looking for a Certified Technicians to join our team. If you are tired of where you work and want to work in a clean and safe environment, come and see what we have to offer. We are looking for certified technicians to join our team. We provide an excellent working environment and temperature-controlled shop. At Perry Ford of National City, we strive to make every customer a customer for life. Happy employees make happy customers, and we reward individuals who are ready to work hard and stay motivated. Every employee at Perry Ford of National City is absolutely critical to its success. Our promise is to keep delivering the same award winning service and value that our community has come to expect from our dealership. WHAT WE OFFER • Medical and Dental, • Competitive wages, • Paid time off and vacation Perform work specified on the repair order with efficiency and in accordance with dealership * Test-drive vehicles, and test components and systems, using diagnostic tools and special service equipment * Diagnosing, maintaining, and repairing vehicle automotive systems including engine, transmission, electrical steering, suspension, brakes, air conditioning, etc. * Communicate directly with the Service Advisor so that customers can be informed if any additional service is needed. Providing an estimate of time needed for additional repairs * Executing repairs under warranty to manufacturer specifications Qualifications * 2+ years of Service Technician experience required * Certified General Motors Technician * ASE Certification required * B level qualifications, including Diagnostic, Electrical and Engine Repair * Must hold a high school diploma or equivalent * Excellent customer service skills * Basic Computer skills * Positive, friendly attitude, along with a customer service mentality * Enjoy working in a fast paced environment * Team player * Must have a valid driver’s license * Ability to learn new technology, repair and service procedures and specifications Able to operate electronic diagnostic equipment

Job DescriptionBenefits/Perks • Exclusively Whirlpool Corporation repairs! (Whirlpool, Maytag, Kitchenaid, etc..), • Be your own boss, • Optional- Company Vehicle, • Flexible Schedule, • Earn $150,000 plus per year. Income based on your performance and skill! Job Summary We are looking for Appliance Repair Technicians capable of operating independently and professionally. High earners are organized, keep themselves up to date on training, are efficient and genuinely care about their customers. Responsibilities • Meets with customers in their homes or places of business and ensures customers receive better service than they were expecting., • Interact with customers to determine service problems, explain needed repairs, and provide estimates as needed., • Meet or exceed key performance indicator metrics for performance incentives., • Masterfully diagnose and repair all major appliances such as washers and dryers, gas/electric stoves, microwave ovens, and dishwashers., • Learn and apply the details of today's connected technology to major home appliance goods., • Complete all required technician competency model training, and proactively seek to remain a knowledgeable expert in the repair industry., • Drive safely and responsibly to and from customer locations., • Utilize handheld devices to update work orders in a paperless environment., • Consistently deliver a 5 Star customer experience Qualifications • Must be enthusiastic and customer service-focused., • Knowledge of principles and processes for providing customer and personal services. This includes customer needs assessment, meeting quality standards for services, and evaluation of customer satisfaction., • Willingness to learn and develop skills., • Must have a valid drivers license., • Must be able to pass a pre-employment drug screen, criminal background check, and drivers license check., • Ability to read, write, and speak English (bi-lingual is always a plus), • Must be able to lift or maneuver 50 pounds., • High school diploma or equivalent., • Prior experience in appliance repair, HVAC, electrical, or related fields preferred., • (optional)Willing to relocate.

Job Description Overview Pride Resource Partners is seeking experienced Power Line Field Inspectors (Electric Distribution Inspector) to perform detailed overhead infrastructure inspections for transmission and distribution systems. This position plays a critical role in identifying asset conditions, documenting field findings, and supporting risk-informed maintenance programs designed to enhance grid reliability and wildfire prevention. Inspectors are responsible for performing both ground-based and aerial-assisted inspections (in coordination with a drone pilot teammate), capturing high-resolution imagery, and documenting conditions in accordance with company quality standards and governing construction and maintenance codes. Key Responsibilities • Perform visual and photographic inspections of overhead transmission and distribution assets following prescribed inspection methodologies., • Identify and document asset conditions requiring maintenance, repair, or data correction using standardized inspection tools and software., • Capture high-quality imagery from the ground or via UAS collaboration, ensuring complete 360°ree; structure coverage and accurate structure association., • Prepare and upload inspection data, photographs, and notifications to secure cloud systems with accuracy and timeliness., • Apply inspection codes, component identifiers, and defect classifications in accordance with governing construction standards., • Conduct pre-job tailboards, complete daily safety briefings, and adhere to all Safety Management System (SMS) protocols., • Communicate field constraints, access limitations, or environmental sensitivities through established reporting channels., • Engage respectfully with property owners, customers, and the public to facilitate inspection access and field coordination., • Support quality review processes and corrective actions when required., • Participate in safety meetings, orientation sessions, and ongoing refresher training., • Minimum 18 months of experience performing overhead electrical utility inspections or equivalent field construction experience within the past 3 years. Applicants with less than 18 months of experience are still encouraged to apply. Other open positions are available for those that qualify., • Strong understanding of overhead electrical systems, including pole-top equipment, conductors, and hardware., • Ability to read and interpret utility standards, work orders, and structure maps., • Proficiency with tablet- or mobile-based inspection software and structured data entry tools., • Experience documenting photographic evidence with digital cameras or mobile capture systems., • Valid driver’s license and clean driving record; ability to travel daily throughout assigned regions., • Prior experience in transmission or distribution inspection programs, vegetation management, or pole assessments., • Familiarity with General Orders 95 and 165 or equivalent regulatory standards., • Understanding of utility priority notification systems and maintenance classification processes., • OSHA 10 or 30 Construction Safety Certification., • Experience collaborating with UAS flight teams or remote inspection programs., • Field-based role with work in outdoor and remote environments., • May include extended hours or weekend work to meet inspection schedules., • Must maintain compliance with all safety protocols and SMS., • Full-time position with competitive hourly rate., • Per diem, hotel, travel reimbursement, and field allowances paid per project guidelines. Since 2015, the team at Pride Resource Partners has delivered high-value project management, inspection services, and aerial operations support for major utility and infrastructure clients across the western United States. Our team integrates advanced technology, data analytics, and safety best practices to deliver precision, reliability, and operational excellence across every project we manage. Our inspection teams uphold the highest standards of compliance, accuracy, and quality to help our clients maintain a reliable, resilient, and wildfire-safe electrical grid. Learn more about our team:

Job DescriptionSummaryOur client is currently seeking individuals for a full-time position as a Mechanical Project Engineer located in the San Diego, CA area. Backed by the strength and stability that comes with almost a century of customer care and ownership, our client adheres to the highest safety standards for its employees and clients. They offer industry-leading building information modeling (BIM) capabilities, design/build services, sustainable solutions, commercial HVAC services, and complex mechanical and industrial system installations. Duties & Responsibilities • Project Estimating (Take-Off & Analysis), • Project Scheduling (Manpower scheduling), • Manage RFIs (Requests for Information), • Prepare Submittal Packages, • Manage Flow of Contractor provided submittal data, • Assist in data population of forms, • Prepare Project Progress Billings, • Assist in Technical Analysis, Trouble shooting, and problem solving of HVAC Air Equipment, HVAC Piping Equipment Systems, HVAC & Plumbing EquipmentQualifications & Requirements, • Basic working knowledge HVAC & Plumbing Design & System OperationBasic working knowledge of Commercial & Industrial construction sequences, • Basic working knowledge of construction estimatingBasic working knowledge of testing procedures for HVAC systems., • Basic working knowledge of ASHRAE data & guidelines, • Average proficiency with MS Project scheduling program, • Average proficiency with MS Access or other database programs, • Above average proficiency with MS Excel & Word, • Above average proficiency with Internet, • Above average verbal & writing skills, • Above average organizational skills in handling & archiving technical data, • Recommended that the candidate have bachelors degree in Mechanical Engineering, Construction Management, Other Engineering Disciplines (Civil, Industrial, or Structural), and/or 5 years industry experience as a Construction Project Engineer, • Candidate should be able to demonstrate experience with project administration, project scheduling, productivity analysis, project cost control accounting, plus equipment & material procurement., • Company offers competitive benefits including 401-K, health, dental, and life and long-term disability. Includes, holiday, sick and vacation pay.They offer their employees a competitive salary and competitive benefits package and are always looking for individuals with the talent and skills required to contribute to their continued growth and success. Equal Opportunity Employer/Veterans/DisabledEmployment Type: Full time Location: San Diego, CA

Job DescriptionSalary: $20 $45 per hour About Us:GigaKOM has been a leading provider of Enterprise-level IT services in California for over 20 years. We serve schools, local and state agencies, and businesses by partnering with top distributors to deliver cost-effective and efficient IT solutions. As we expand our client base and explore new markets, we seek individuals to join our Engineering team. If you are looking for a dynamic environment to grow and develop your career in technology integration, this is the opportunity for you. This role offers potential advancement into upper management, design, support, and training positions. Low-Voltage Lead Technician San Diego, CA (hourly / hands-on crew lead) Pay scale$20 $45 per hour DOE prevailing-wage public work may exceed $55 per hour (Hourly Rate Band based on hour classification-different travel, admin, and installation rates) ( $60 k $93 k a year at 2,080 hrs + OT) Position highlights Home base San Diego; travel up to 60 % statewide (per-diem & hotel paid) Full-time (contract options available) overtime-eligible Company truck or mileage plan 100 % employee medical / dental / vision PTO Day 1 401(k) match -Clear promotion and growth pathways to leadership positions and provided trainings What youll lead 36 technicians pulling and terminating Cat 6A & OM4 fiber, labeling, Fluke/OTDR testing Installation and start-up of UPS units, PoE switches, Wi-Fi 6E access points, IP-CCTV and structured cabling Daily huddles, material staging, progress tracking, as-built docs, Cal/OSHA safety tailboards On-site coaching and performance feedback for apprentices What youll do hands-on Rack, ladder-tray and patch-panel builds; Layer 1/2 troubleshooting; client cut-overs Resource scheduling and rapid issue resolution in partnership with Project Managers Minimum qualifications 3 + years leading low-voltage install crews (copper, fiber, network gear, UPS) California drivers license (clean) able to lift 50 lbs and work ladders & lifts No criminal record available for regular day trips and occasional overnights Reporting lineReports to the Manager Engineering Field Services and collaborates daily with Sales Engineers & PMs. Performance metricsOn-time task delivery, test-pass rate, accurate documentation, positive customer feedback. If youre ready to run crews and still stay deeply technical, click Apply and join GigaKOMs growth story.

Job DescriptionCompany Description Breathe deeply, dream wildly, and discover a soulful sanctuary where finding yourself comes naturally. Magic sits around every corner and within every conversation. It enchants through the charm of Los Peñasquitos Canyon and the sunshine of San Diego. It’s where classic meets cool, the fine unwinds into fun and inspiration leads to immersion. Bask in the San Diego sunshine and enjoy our five-star setting at Fairmont Grand Del Mar. Immersed in nature, the resort hosts 249 elegantly appointed guestrooms and suites, an 18-hole private Tom Fazio-designed golf course, a five-star spa and offers two dozen weekly outdoor activities across the 400 acres of dramatic canyon scenery including yoga, meditation and archery. The Grand includes six different dining venues, including San Diego’s only three-Michelin starred restaurant, Addison. Growth and advancement are not only accessible but actively encouraged. We promote a balanced life for our colleagues and continually seek new ways to enhance our environment and support our beautiful home of San Diego. What is in it for you: • Employee benefit card offering discounted rates in Accor worldwide for you and your family, • Learning programs through our Academies designed to sharpen your skills, • Ability to make a difference through our Corporate Social Responsibility activities, • Career development opportunities with national and international promotion opportunities. The sky is your limit., • Hourly Rate of Pay: $23.69 - $36.05/hour USDJob Description This position is responsible for the maintenance and repair of all of Electrical systems and equipment including planned maintenance, installation and modifications. • Maintain and repair all electrical systems including troubleshooting, preventative maintenance, electrical system installation and temporary power installations., • Ensure adherence to all OSHA and NEC codes and regulations, follow internal safety policies and procedures., • Conduct routine preventative maintenance on all equipment as assigned. Install wiring and devices., • Operate and maintain in-house lighting control systems., • May be responsible for assisting with the setup, tear down and distribution of temporary power for shows and events held on property., • Perform safety checks all electrical devices., • Maintain an adequate stock of parts and ensure cleanliness in assigned spaces., • Perform other duties as assigned. Qualifications To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • High school diploma or equivalent preferred., • Journeymen electrician certification., • Must have five years of verifiable commercial experience., • Must be able to read Engineering drawings and technical literature., • Valid Driver's License and a satisfactory driving record may be required., • Material Handling Equipment certification as required., • Strong organizational and interpersonal skills required. Ability to read and interpret documents such as safety procedures, operating and maintenance instructions, and procedure and technical manuals. Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers or colleagues of the organization., • Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations., • Ability to define problems, collects data, establish facts, and draw valid conclusions. Ability to interpret and extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables. Additional Information Our commitment to Diversity & Inclusion: We are an inclusive company, and our ambition is to attract, recruit and promote diverse talent. Fairmont Grand Del Mar is proud to be an Equal Opportunity Employer. EOE/M/F/D/V Why work for Accor? We are far more than a worldwide leader. We welcome you as you are and you can find a job and brand that matches your personality. We support you to grow and learn every day, making sure that work brings purpose to your life, so that during your journey with us, you can continue to explore Accor’s limitless possibilities. By joining Accor, every chapter of your story is yours to write and together we can imagine tomorrow's hospitality. Discover the life that awaits you at Accor, visit Do what you love, care for the world, dare to challenge the status quo! #BELIMITLESS

Job Description For over 35 years, Yorktel has been the video managed services partner around the world for some of the largest business and government agencies. With over 10,000 video systems under management worldwide – more than any other video communications service provider – Yorktel has the proven expertise and global reach to deliver enterprise-quality visual communications. Yorktel is currently seeking a Senior AV Technician who will play a key role in the support of the assigned customer. This position is client facing and must be professional with a strong customer service attitude. The Sr. Tech will work with the Site Lead and other techs assigned to their site to provide excellent support of the clients. Roles & Responsibilities: • Provide excellent customer service., • Provide client assistance to support collaboration technology or process., • Provide support on all collaboration technologies including, but not limited to:, • Microsoft Teams, • Meetup devices, • Owl video devices, • Webex, • Zoom, • Provide end-user support on process:, • Scheduling meetings with technology, • Requesting support, • Basic use of technology, • Troubleshoot, to level 1, all issues to capability and resolution., • Simple replacement of equipment, • Swap of cables, • Basic troubleshooting, • Escalate issues, as required, to necessary parties following process., • Weekly room checks, • Quarterly room preventative maintenance, • Maintain and report on all technology requests within Client’s Incident Management System., • Ensure all assigned tickets are updated and closed once resolved., • Provide standard weekly, monthly and quarterly reports as required and on-time., • Adhere to all Yorktel policies including, but not limited to:, • Time keeping, • Overtime requests and authorizations, • Vacation and sick time requests Leadership & Supervisory Responsibilities: • 1-3 years’ experience working with audio/visual equipment., • 1-3 years’ experience with troubleshooting technical issues., • 1-3 years’ experience in a customer facing position., • Basic understanding of IP networking., • Basic understanding of A/V signal flows., • Ability to lift up to 50 lbs, • Climbing of ladders, up to 10 feet/3 meters., • Ability to walk and be on your feet for long periods of time., • Some overtime required, as allowed by local labor law., • Travel within NJ (no overnight stay) required as directed by their manager. We conform to all the laws, statutes, and regulations concerning equal employment opportunities and affirmative action. We strongly encourage women, minorities, individuals with disabilities and veterans to apply to all of our job openings. We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, gender, national origin, disability status, genetic information and testing, family and medical leave, sexual orientation and gender identity or expression, protected veteran status, or any other characteristics protected by law. We prohibit retaliation against individuals who bring forth any complaint, orally or in writing, to the employer or the government, or against any individuals who assist or participate in the investigation of any complaint or otherwise oppose discrimination.

Job DescriptionBenefits: • 100% Covered Health Insurance, • Birthday and Work Anniversary Paid Off, • Full Service Gym with Shower Access, • 401(k) matching, • Bonus based on performance, • Company car, • Competitive salary, • Dental insurance, • Employee discounts, • Free uniforms, • Paid time off We are seeking experienced HVAC Technicians with sales focus for residential service (light repairs) and HVAC system replacement sales. You will provide system options, design recommendations, and financing to homeowners and light commercial clients while delivering excellent service. If youre an HVAC tech ready to step into sales and earn BIG commissions, this is your opportunity. Compensation & Benefits: Highest Compensation Structure in San Diego Up to 25% Commission on Repair Sales 10% Commission on Replacement Sales Base Salary No Draw! Up to 5% 401(k) Match 100% Employer-Paid Health Insurance Bonuses & Incentives Ongoing Training Multiple Sessions Per Week On-Site Gym Brand New, Fully Equipped Vans Provided Why Join Our Team? We have the tools you need to succeed: 2 Years No Interest & No Payments on Repairs and Replacements, Lifetime Parts and Labor Warranties, etc.! Industrys Best Membership Program Highly Competitive Pricing Strong Close Rates Ethical Sales System No Pushy Tactics Strong Support & Leads Provided Key Responsibilities: • Present system replacement options & upgrades, • Provide clear financing options, • Conduct light repairs / service as needed, • Follow One Hour sales system & ethical selling practices, • Maintain sales margins and revenue targets, • Keep company vehicle clean, organized, and professional, • Respect customer homes wear floor savers and maintain professionalismQualifications:, • High school diploma or equivalent, • HVAC trade experience (required), • Sales experience preferred, • Excellent communication and listening skills, • Strong technical competence in HVAC systems, • Clean driving record, • Pass background check & drug screeningIf youre an HVAC tech who wants to close more sales, earn industry-leading commissions, and work with a professional team apply now!

Job DescriptionFounded in 2015, Shield AI is a venture-backed deep-tech company with the mission of protecting service members and civilians with intelligent systems. Its products include the V-BAT and X-BAT aircraft, Hivemind Enterprise, and the Hivemind Vision product lines. With nine offices and facilities across the U.S., Europe, the Middle East, and the Asia-Pacific, Shield AI’s technology actively supports operations worldwide. For more information, visit . Follow Shield AI on LinkedIn, X, Instagram, and YouTube. Job Description: Shield AI is seeking a Principal Mechanical Design Engineer with deep expertise in mechanism design to support the development of our next-generation autonomous UAV platform. In this high-ownership role, you will lead the architecture, design, and development of precision mechanical systems and actuation mechanisms that are critical to mission success. You will work closely with cross-functional teams to create rugged, lightweight, and manufacturable mechanisms-ranging from landing gear to deployable payload systems-while delivering high performance in dynamic and harsh environments. This is an opportunity to design at the edge of innovation and autonomy, with real-world impact.What you'll do: • Design complex electro-mechanical mechanisms for autonomous aircraft, • Own the full design process: concept, CAD, tolerance analysis, material selection, and drawing release, • Perform structural and kinematic calculations and preliminary FEA, • Prototype, test, and iterate mechanism designs for functionality and reliability, • Collaborate with electrical, avionics, flight controls, and propulsion teams, • Mentor junior engineers and promote engineering excellence, • Support pre-production builds, prototype integration, and ground/flight testing Required qualifications:, • B.S. in Mechanical/Aerospace Engineering, • 10+ years in mechanical or mechanism design, • Strong CAD skills (NX preferred), • Kinematic analysis and optimization, • Structural analysis utilizing hand calculations and finite element methods, • FEA analysis: Modal, non-linear and linear, buckling, fatigue, • GD&T and tolerance stack-ups for mechanical systems, • Materials selection inclusive of alloys, heat treatments, allowables, and finishes, • Ability to work independently and lead in fast-paced, cross-functional teams, • A demonstrated record of working hard, being trustworthy, holding yourself to high standards, and being kind to others Preferred qualifications:, • Experience with UAVs, aircraft, or robotic systems, • Familiarity with electro-mechanical actuators, • Proficiency in FMEA, DOE, and root cause analysis, • Hands-on machine shop or mechanic experience (professional or hobby), • RTCA DO-160, structural, or actuated mechanism testing experience Shield AI is proud to be an equal opportunity workplace and is an affirmative action employer. We are committed to equal employment opportunity regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, marital status, disability, gender identity or Veteran status. If you have a disability or special need that requires accommodation, please let us know. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job DescriptionFounded in 2015, Shield AI is a venture-backed deep-tech company with the mission of protecting service members and civilians with intelligent systems. Its products include the V-BAT and X-BAT aircraft, Hivemind Enterprise, and the Hivemind Vision product lines. With nine offices and facilities across the U.S., Europe, the Middle East, and the Asia-Pacific, Shield AI’s technology actively supports operations worldwide. For more information, visit . Follow Shield AI on LinkedIn, X, Instagram, and YouTube. Job Description: Shield AI is seeking a Senior Mechanisms Design Engineer with deep expertise in mechanism design to support the development of our next-generation autonomous UAV platform. In this high-ownership role, you will lead the architecture, design, and development of precision mechanical systems and actuation mechanisms that are critical to mission success. You will work closely with cross-functional teams to create rugged, lightweight, and manufacturable mechanisms-ranging from landing gear to deployable payload systems-while delivering high performance in dynamic and harsh environments. This is an opportunity to design at the edge of innovation and autonomy, with real-world impact.What you'll do: • Design complex electro-mechanical mechanisms for autonomous aircraft, • Own the full design process: concept, CAD, tolerance analysis, material selection, and drawing release, • Perform structural and kinematic calculations and preliminary FEA, • Prototype, test, and iterate mechanism designs for functionality and reliability, • Collaborate with electrical, avionics, flight controls, and propulsion teams, • Mentor junior engineers and promote engineering excellence, • Support pre-production builds, prototype integration, and ground/flight testing Required qualifications:, • B.S. in Mechanical/Aerospace Engineering, • 5+ years in mechanical or mechanism design, • Strong CAD skills (NX preferred), • Kinematic analysis and optimization, • Structural analysis utilizing hand calculations and finite element methods, • FEA analysis: Modal, non-linear and linear, buckling, fatigue, • GD&T and tolerance stack-ups for mechanical systems, • Materials selection inclusive of alloys, heat treatments, allowables, and finishes, • Ability to work independently and lead in fast-paced, cross-functional teams, • A demonstrated record of working hard, being trustworthy, holding yourself to high standards, and being kind to others Preferred qualifications:, • Experience with UAVs, aircraft, or robotic systems, • Familiarity with electro-mechanical actuators, • Proficiency in FMEA, DOE, and root cause analysis, • Hands-on machine shop or mechanic experience (professional or hobby), • RTCA DO-160, structural, or actuated mechanism testing experience Shield AI is proud to be an equal opportunity workplace and is an affirmative action employer. We are committed to equal employment opportunity regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, marital status, disability, gender identity or Veteran status. If you have a disability or special need that requires accommodation, please let us know. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description Electromechanical Assembler - 1st Shift - Miramar Location Job Description As an Electromechanical Assembler, you will be responsible for building both new and existing products, including up to five sub-assemblies per week. You will work primarily in mechanical assembly, following work instructions and blueprints. You will collaborate with the engineering team on custom assemblies, utilizing drawings and occasionally developing work instructions. The role involves assembling components and troubleshooting mechanical systems such as gears, motors, and pumps using hand and power tools in line with design specifications. Responsibilities • Assemble and troubleshoot mechanical systems, such as gears, motors, and pumps, using hand and power tools., • Hand-solder electronic components on Printed Circuit Boards (PCBs) in accordance with IPC-J-STD-001 soldering requirements., • Perform precision soldering on PCBs and assemble mechanical subsystems of medium to high complexity., • Conduct in-process inspections and connect units to test equipment, measuring voltage, amps, wattage, and frequency., • Experience in mechanical assembly, including the use of calipers, torque wrenches, and micrometers., • Proficiency in reading and interpreting blueprints and work instructions., • Familiarity with electronic assembly and soldering techniques., • Experience with IPC 610 or J-STD 001 standards is preferred., • Ability to check and verify drawings for accuracy and communicate any discrepancies. Join a small R&D company where you can make a real impact and know everyone you work with. We offer extensive training opportunities, including certification support for those with a mechanical background. Enjoy a collaborative work environment with your own workstation and space to innovate. Work Environment The work schedule is Monday through Friday, from 7:00 AM to 3:30 PM, with occasional Saturday work once a month and potential for overtime. As part of a small R&D company, you'll engage in hands-on work, taking apart and rebuilding products daily. Training on custom builds will last nearly a year, ensuring you are well-prepared for success in your role. Job Type & Location This is a Contract to Hire position based out of San Diego, CA. Pay and Benefits The pay range for this position is $23.00 - $26.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program, • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in San Diego,CA. Application Deadline This position is anticipated to close on Nov 26, 2025. About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description Job Title: Construction Technician Job Description We are seeking a skilled Construction Technician to join our team. The successful candidate will be responsible for installing and maintaining plumbing, electrical work, framing, and painting. Responsibilities • Install and maintain all plumbing systems., • Perform electrical work with precision and safety., • Handle framing and painting tasks efficiently., • Proficiency in carpentry., • Expertise in plumbing and electrical systems., • Experience with drywall, framing, and painting. The role is primarily based at Chevron gas stations, requiring work in various settings that may involve indoor and outdoor tasks. Job Type & Location This is a Contract position based out of San Diego, CA. Pay and Benefits The pay range for this position is $25.00 - $30.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program, • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a hybrid position in San Diego,CA. Application Deadline This position is anticipated to close on Dec 2, 2025. About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job DescriptionBefore applying to this job opening, please review the Company's Applicant Privacy Policy located at: This Applicant Privacy Policy governs the Company's collection, use, and sharing of personal information you provide during the application process. Service Technician I - Kearny Mesa Hyundai Non-Exempt Job Summary: A Service Technician I assists experienced Service Technician II with a variety of tasks, including routine maintenance, diagnostics, and repairs. This role is designed for individuals passionate about automotive technology and committed to learning the skills necessary to advance in the field. You will receive on-the-job training, support, and guidance to develop your technical expertise and contribute effectively to our service. Essential Functions: • Assist experienced service technician II with routine maintenance and repair tasks. Observe and learn various aspects of automotive repair, including diagnostics, parts replacement, and system servicing., • Perform basic repair and maintenance tasks such as oil changes, tire rotations, brake servicing, and fluid checks. Follow instructions and procedures to ensure quality workmanship., • Help with the use of diagnostic tools and equipment to identify vehicle issues. Learn to interpret diagnostic data and assist in troubleshooting problems., • Drive vehicles to assess its performance after modification or adjustments have been made., • Move vehicles around the shop to reposition them for further work or to make space for other vehicles., • Provide support in interacting with customers when required. Communicate effectively to understand service needs and relay information to technicians., • Maintain a clean and organized work environment. Ensure tools and equipment are properly stored and in good working condition., • Document all work performed, including parts used and labor hours; maintain accurate records of repairs and services., • Follow all federal, state, and local regulations governing automotive service and repair, including Cal/OSHA., • Work closely with other technicians, parts associates, and service advisors to ensure efficient workflow., • Participate in team meetings and training sessions to stay updated on the latest automotive technologies and repair techniques., • Adhere to all safety protocols and procedures—; including wearing protective gear and equipment as required., • Maintain a clean workspace., • Maintain satisfactory attendance. Minimum Qualifications: • 2 years’ experience as an entry-level automotive technician., • Valid Driver’s license and safe driving record; If currently out-of-state, a California driver’s license must be obtained within 30 days of employment., • Ability to lift up to 50 pounds., • Willingness to participate in ongoing training and professional development., • Completion of National Automotive Technicians Education Foundation (NATEF), a certified technical training program in automotive technology at a high school or at a community college., • Mechanical knowledge and understanding of vehicle systems., • Good verbal communication skills and the ability to work well within a team. Ability to understand and follow written and verbal instructions., • Strong attention to detail and a commitment to performing high-quality., • Ability to follow instructions and work efficiently., • Physical ability to stand, walk, and work in various positions (e.g., bending, kneeling) for extended periods., • Manual dexterity to handle tools and small parts., • Ability to work in a fast-paced environment and meet deadlines., • Ability to frequently lift 30 pounds and occasionally lift up to 50 pounds., • Must be able to work in tight spaces., • Work in well-ventilated and well-lit repair shop., • Exposure to hazardous conditions and equipment that may result in minor injuries., • Frequent use of protective gear such as goggles and earplugs., • Work both indoors and outdoors, something in cramped spaces and awkward positions., • Regular exposure to contaminants such as antifreeze and chemical degreasers., • Work in close proximity to other technicians and mechanics., • Noise level is moderate. Employee Benefits Include: • Medical, Dental, & Vision Insurance, • Employer Paid Life Insurance, • Employer Paid AD&D, • 401k (with Employer match), • Generous Vacation Package, • Inter-Company Transfers and Promotion Opportunities, • Tenure recognition and awards, • Vehicle Purchase Discount Program, • Vehicle Service Discount Program, • Golf Benefits at Maderas Golf Club (subject to qualification) If you receive an offer of employment, it will be a conditional offer contingent on the successful completion of a pre-employment drug screen and background check. Sunroad is committed to providing reasonable accommodations to qualified individuals with disabilities to ensure equal employment opportunities and access to all programs, services, and activities. If you require accommodations to participate in the application process or to perform the essential functions of the job, please contact the HR Department to discuss your needs confidentially. We will work with you to identify appropriate accommodations based on your specific circumstances and in compliance with applicable laws. We are an Equal Opportunity Employer (M/F/D/V) and maintain a drug-free workplace. If you receive an offer of employment, it will be a conditional offer contingent on the successful completion of a pre-employment drug screen and background check. Sunroad is an Equal Employment opportunity and Affirmative Action Employer. We are committed to providing equal opportunity in all of our employment practices, including selection, race (including traits historically associated with race such as hair texture and protective hairstyles such as braids, locks, and twists); religion; religious creed; religious dress/grooming; color; age (40 and over); sex; sexual orientation; gender; gender identity (meaning a person’s identification as male, female, a gender different from the person’s sex at birth, or transgender); gender expression (including a person’s gender-related appearance or behavior, whether or not stereotypically associated with the person’s sex at birth); national origin; ancestry; citizenship status; uniform service member status; military or veteran status; marital status; pregnancy; childbirth; medical conditions related to pregnancy, childbirth, or breast feeding; medical condition (including cancer related or HIV/AIDS related); handicap; physical disability; mental disability; genetic characteristics; genetic information; or any other protected status in accordance with the requirements of all federal, state and local laws. Our Equal Employment Opportunity Policy applies equally to interns and volunteers. Company DescriptionFounded in 1977, Sunroad Enterprises is a diversified holding company based in San Diego. Sunroad consists of three distinct divisions: Automotive, Real Estate and Maderas Golf. With successful ventures across multiple countries, we bring a strategic focus to seeing developments come to life. Sunroad Enterprises is one of the largest minority-owned businesses in San Diego and has earned numerous quality commendations from local, regional, and national organizations. Please visit our website to learn more about our endeavors and career opportunities: in 1977, Sunroad Enterprises is a diversified holding company based in San Diego. Sunroad consists of three distinct divisions: Automotive, Real Estate and Maderas Golf. With successful ventures across multiple countries, we bring a strategic focus to seeing developments come to life. Sunroad Enterprises is one of the largest minority-owned businesses in San Diego and has earned numerous quality commendations from local, regional, and national organizations. Please visit our website to learn more about our endeavors and career opportunities:

Job DescriptionJob Title: Quality Assurance Inspector Job Description The Quality Assurance Specialist ensures timely and effective implementation of company policies, procedures, and activities involved in assuring the quality of services and products for shipboard installations. This role focuses on inspection, compliance, and documentation for fiber optic and electrical cable assemblies installed aboard U.S. Navy vessels, in accordance with NAVSEA and MIL-STD requirements. The role emphasizes maintaining product and service quality, identifying, solving, and preventing problems affecting service/product quality, maximizing productivity, and complying with regulatory requirements. Responsibilities • Support the development and compliance of Quality Assurance Work Procedures, Test Procedures, and Objective Quality Evidence (OQE)., • Review and ensure compliance with on-site production Work Packages and Technical Work Documents (TWD)., • Ensure the Quality Management System aligns with NAVSEA Standard Items and NAVSEA Technical Specifications., • Implement and administer Corrective Action and Preventive Action processes., • Conduct periodic internal audits and frequent surveillance inspections to maintain quality and safety standards., • Perform in-process and final inspections of fiber optic and copper cable installations onboard Navy ships., • Conduct functional and continuity tests using OTDR, TDR, and other diagnostic tools., • Verify proper termination, labeling, and routing of cable assemblies., • Maintain and calibrate test equipment to ensure accuracy., • Compile and review test and inspection records for all completed tasks., • Prepare reports on nonconformance issues and corrective actions., • Maintain training and compliance records as required by contract., • Read, understand, and follow customer work item instructions, drawings, and routing diagrams., • Provide input for clear and concise work instructions to ensure compliance with specifications., • Capture and report Lessons Learned for continuous improvement., • Support the maintenance of test equipment and ensure proper setup and calibration.Essential Skills, • Quality assurance expertise, • Blueprint reading, • Familiarity with NAVSEA Standard Items and specified test requirements, • Ability to read, understand, and follow customer work item requirements, drawings, and wiring diagrams, • Experience with Quality Management System in compliance with NAVSEA Standard Items and NAVSEA Technical SpecificationsAdditional Skills & Qualifications, • 3-5 years of relevant experience working in ship repair onboard US Navy ships, • Experience installing, terminating, and testing fiber optic and copper multi-pin and RF cable assemblies is a plusWork Environment Work will be performed both at shop facilities, various shipyards, and Navy bases as needed. Why Work Here? Join a dynamic team that values quality and precision. Enjoy a role that offers opportunities for professional growth and development while working in an environment that supports continuous improvement and innovation. Job Type & Location This is a Contract to Hire position based out of National City, CA. Pay and Benefits The pay range for this position is $30.00 - $34.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program, • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in National City,CA. Application Deadline This position is anticipated to close on Dec 1, 2025. About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description Solderer Assembler - Kearny Mesa Location - $22/hr-$30/hr 1st shift M-F, Contract-to-Hire Employee stock once full-time Responsibilities • Read work orders and follow production documentation or sample assemblies., • Receive verbal instructions regarding duties., • Perform tasks such as labeling, wire cutting, stuffing, crimping, bag and tag, soldering, potting, IDC, SCSI, heat shrink, PC board soldering, backshelling, harnessing, harness board construction, box builds, kitting, create wire lists, and pin extraction., • Proficient in soldering, assembly, labeling, wire cutting, crimping, and harness assembly., • Knowledge of IPC 610 and IPC 620 standards., • Possess J-STD-001 Certification (can be expired)., • Ability to use microscopes., • Experience with heat shrinking, stuffing, and soldering wire to wire, connectors, and thru-hole., • Ability to handle epoxy and solder cups. This is a Contract to Hire position based out of San Diego, CA. Pay and Benefits The pay range for this position is $22.00 - $26.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program, • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in San Diego,CA. Application Deadline This position is anticipated to close on Nov 28, 2025. About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job DescriptionOverview Company Overview: Join Allied Universal® Technology Services, a global leader in transforming the security industry. We integrate advanced technology - video surveillance, electronic access control, alarm monitoring and augmented solutions with physical security to help people feel safe. Whether you're an installation technician, service technician, engineer, or project manager, you'll discover rewarding opportunities to grow your career as part of a valued team. Apply today and be phenomenal-build a meaningful career while protecting what matters most through innovative security technology. Job Description: Job Description Allied Universal® is hiring a Solutions Architect II to support the Nuclear division. The Solutions Architect II works independently on system design, proposals, estimating, planning and supporting the achievement of meeting sales goals. Pay Range: $70,000 - $90,000 annually + 2.5% quarterly bonus RESPONSIBILITIES: • Conduct site walkthroughs with client and sales understanding the need, • Develop technical solutions that map customer business requirements to security technology solutions, • Generation of technical scopes of work (SOW) and detailed design narratives for technical solutions and associated cost estimates, • Manage estimation process to include interfacing with multiple representatives of sales, management, and customer teams, • Analyze blueprints, construction drawings, and technical/functional design specifications to prepare compliant solutions, • Research emerging technologies in support of security integration solutions, • Interface with product and distribution partners to obtain systems, device, and equipment pricing during estimating process, • Support Sales Team by participating in technical discussions and meetings with customers and/or product partners, to include ROI (Return on Investment) conversations and presentations, • Understanding construction divisions, as they relate to Electronics -Safety and Security for RFP responses, • Maintain quality assurance by following organization and department standards QUALIFICATIONS (MUST HAVE): • High school diploma or equivalent, • Experience working with access control and video systems, • Licensing requirements are subject to state and/or local laws and regulations and may be required prior to employment, • Must possess one or more of the following:, • Minimum of three (3) years of experience with integrated electronic security solutions, • Minimum of two (2) years of experience in a pre-sales support/engineering position, • Working knowledge of network infrastructure including switches, routers, IP configuration, • General understanding of technologies enabling network redundancy and high availability, • Understanding of IP-based video management system design, including bandwidth and protocol considerations, • Knowledge of access control systems, including alarm panel communication structures (Apollo and Mercury) and line supervision, • Familiar with Iris biometric deployment requirements and general access control concepts, • Knowledge of advanced video analytics, • General understanding of operating system virtualization, • Familiarity with cybersecurity fundamentals within physical security environments, • Knowledge of Software as a Service (SAAS) and cloud-based security solutions, • Ability to work in a dynamic environment; capable of managing multiple tasks, setting priorities, and meeting deadlines, • Excellent oral and written communication skills internally and with stakeholders, • Ability to maintain proprietary information with high level of discretion, • Proficiency with Microsoft Office (Excel, Outlook, PowerPoint, Project, Visio, and Word), • Ability to travel (20%-30%) on an as-needed basis, • Skilled in utilizing PDF editing software and creation tools such as Bluebeam for device plotting and team collaboration PREFERRED QUALIFICATIONS (NICE TO HAVE): • College degree in Computer Science, Engineering, or another related major, • Project Management (PMP) certification, • Utilities and Nuclear Power Generation Knowledge, • DOD and DOE Knowledge, • Any of the following:, • Physical Security Professional (PSP), • Cisco Certified Network Associate (CCNA), • Pay Range: $70,000 - $90,000 annually + 2.5% quarterly bonus, • Medical, dental, vision, basic life, AD&D, retirement plan and disability insurance, • Eight paid holidays annually, five sick days, and four personal days, • Vacation time offered at an accrual rate of 3.08 hours biweekly. Unused vacation is only paid out where required by law. Closing Allied Universal® is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race/ethnicity, age, color, religion, sex, sexual orientation, gender identity, national origin, genetic information, disability, protected veteran status or relationship/association with a protected veteran, or any other basis or characteristic protected by law. For more information: If you have any questions regarding Equal Employment Opportunity, have difficulty using the online system and require an alternate method to apply, or require an accommodation at any time during the recruitment and/or employment process, please contact our local Human Resources department. To find an office near you, please visit: . Requisition ID 2025-1468589

Job Description Overview We are seeking a skilled Electrician to join our team. The ideal candidate will have a strong background in electrical systems, construction, and the ability to work independently or as part of a team. This role will primarily be residential and light commercial work throughout San Diego County. Duties • Install, maintain, and repair electrical systems in residential and commercial settings., • Read and interpret blueprints and schematics to determine the layout of electrical systems., • Ensure compliance with codes and local regulations., • Perform installations., • Utilize hand tools effectively for building and framing carpentry tasks related to electrical installations., • Troubleshoot electrical issues and provide effective solutions., • Collaborate with other tradespeople on job sites to ensure project timelines are met., • Minimum 2-3 years of electrical experience preferred, • Electrical Trainee (ET card) preferred, • Proficiency in reading blueprints, schematics, and technical drawings., • Strong knowledge of codes and safety regulations, • Experience working in residential and commercial service jobs, • Familiarity with hand tools used in electrical work and basic is an asset., • Company vehicle, • Monday - Friday schedule, • Professional development assistance to support you taking the licensing test and reaching your goals., • Monthly health insurance stipend, • Sick Time and Vacation Time (after probationary period) Company DescriptionHere at Interwest Electric, we're not just flipping switches—we're powering possibilities! With a reputation for excellence in the electrical industry since 1985, Interwest Electric is dedicated to delivering top-tier solutions that light up the path to success. Recently under new ownership, we are looking to grow our business and our team in a big way. Join us in our mission to electrify the future and be part of something truly remarkable!Here at Interwest Electric, we're not just flipping switches—we're powering possibilities! With a reputation for excellence in the electrical industry since 1985, Interwest Electric is dedicated to delivering top-tier solutions that light up the path to success. Recently under new ownership, we are looking to grow our business and our team in a big way. Join us in our mission to electrify the future and be part of something truly remarkable!

Job Description Our client is a Nationwide and Multi-Regional Top Workplace of 2023! They are an Employee-Owned Company and their foundation is built around construction done right by people who care, in partnership with people they care about! As a Senior Project Manager you will grow your skills, knowledge, and learn best practices from an industry innovator that is also employee-owned! To be successful in this position you will need to be open to learning, disciplined and systems-driven, detail-oriented, comfortable working independently and have a genuine interest in helping team members with a positive and pro-active attitude. Duties • Manage the clients expectations, • Provide project leadership and supervisory skills, • Project document control ensuring project documents are complete, current, and managed appropriately, • Manage/prepare cost proposals and change orders, • Development of project budgets and buy-out/contracting of the work, • Project accounting functions including preparing Owner billings and reviewing/approving Subcontractor progress payments, • Responsible for budgets and cost control throughout the life of the project, • Manage the submittal, RFI, and project documentation requirements., • Develop and manage CPM schedule, • Manage project subcontractors including coordination, procurement of materials and equipment, monitoring budget and cost, manage billings, • Coordinate with project architects, designers, owners, subcontractors, and field personnel Requirements • Commercial and/or Public Works experience managing multiple construction projects or a single larger and complex project., • Graduates of a four-year degree program in construction management, construction science, or other industry-related degree programs preferred, • Strong understanding about current construction methods, materials, and regulations, • Ability to work under pressure and coordinate numerous activities and groups of people who need to cooperate to achieve maximum efficiency, • Must have good communication, teamwork, and organizational skills, • Fluent in Microsoft Office Suite and MS Project scheduling (or other scheduling software)., • A valid drivers license and acceptable driving history is required Special Consideration • Previous experience working on projects as part of a larger school bond program (ie. SDUSD, LAUSD, etc.), • Procore project management software experience, • Higher Education market sector experience, • Healthcare market experience Benefits • Employee Stock Ownership Plan (ESOP), • Profit-Sharing, • 100% employer-paid Health/Dentalpremiumsfor team members, • Generous Vacation and Sick Time off, • Nine (9) Paid Holidays - Including your Birthday!, • 100% employer-paid Life, AD&D, and Long Term Disability insurance, • Retirement plans with company contribution, • Subsidizedtuition on Child Care, • Health/Dependent care FSA's, • Making a difference in the communities you serve Acknowledgments Our client is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to any of the following, whether actual or perceived or based upon identification or association: race, color, religious creed, national origin, ancestry, age, medical condition, pregnancy or childbirth (and related medical conditions), physical or mental disability, genetic information, sex, gender (including gender identity and gender expression), sexual orientation, marital status, registered domestic partner status, military status, veteran status, political activity or affiliation or any other basis protected by law. Employment Type: Full time Location: San Diego, CA

Job Description Kaizen Collision: Rebuilding, Rebranding, and Ready for the Future Kaizen Collision is in a new era — under new ownership and focused on building something better than ever before. We’re rebuilding from the ground up and are looking for dedicated, hard-working individuals who want to be part of a team determined to grow, improve, and lead the way in the collision repair industry. If you’re strong, motivated, and ready to roll up your sleeves to be part of something meaningful — we want you. At Kaizen, our name says it all: Kaizen means continuous improvement, and it's exactly what we strive for every day. We are committed to delivering the highest level of auto repair service in a friendly, honest, and comfortable environment. We’re hungry to show the industry what we’re capable of and to earn the trust of every customer who walks through our doors. With growth comes opportunity. As we expand, we’re committed to creating pathways for our employees to thrive and to building lasting relationships with our clients based on quality and care. What We Offer: Exceptional Health Coverage with Zero Out-of-Pocket Costs We offer health insurance through Curative, a plan designed to make healthcare simple and accessible. After completing a baseline visit, you'll receive access to the First Health network of providers and: $0 deductible $0 copays for in-network care and prescriptions A preloaded cash card for approved out-of-network services After your baseline visit, you’ll unlock $0 out-of-pocket for care—no copays, no deductibles. Just the monthly premium, and that’s it. Competitive salary and performance incentives Dental and vision insurance Paid time off and holidays Career advancement opportunities Join us — and let’s build something great, together. We have an immediate need for an Estimator! The Automotive Estimator will be responsible for assessing vehicle damage, preparing repair estimates, and ensuring the timely and accurate completion of repair work. This includes communicating with customers, managing repair schedules, and ensuring the highest levels of quality and customer satisfaction. Responsibilities: • Assess vehicle damage and prepare accurate repair estimates using industry-standard estimating software, • Communicate effectively with customers and colleagues, ensuring customer satisfaction throughout the repair process, • Manage repair schedules and ensure timely completion of work, • Review repair work and ensure the highest levels of quality control, • Develop and maintain relationships with insurance providers and vendors, • Ensure compliance with safety regulations and environmental standards, • Monitor financial performance and develop plans to improve profitability, • 1-2 years of experience in auto body repair and estimating, • Strong knowledge of automotive repair techniques, tools, and materials, • Familiarity with estimating and repair software, • Ability to work well under pressure and manage multiple priorities, • Excellent communication, interpersonal, and organizational skills, • Valid driver's license and clean driving record

Job Description PM2CM, Inc., (Project Management to Construction Management) is a professional services company dedicated to providing Program and Project Management, Construction Management and Project Controls services during the design and construction phase of projects. Our core expertise is in Project Controls which includes Scheduling, Cost Controls, Document Management and Controls, Budget tracking and monitoring, Estimating, Risk Analysis, Claims avoidance and Mitigation, Change Management and Earned Value Management. Position is located in Pomona, California. Hybrid-Remote (Tuesday and Wednesday in the office/field) The Project Controls Advisor leads the effort to consolidate scope and cost for projects ranging from ~$25M to $1B+. This role will ensure projects follow the governance process and assist the Project Manager with receiving executive approval for projects throughout their lifecycle. In addition to aggregating and reporting on estimated project costs, the position will develop responses to regulatory and legal data requests as it pertains to the estimated costs. The advisor will be a subject matter expert on project estimation and aggregation methodology, including risk and contingency application. • Work with Project Management, Project Controls, Engineering, Finance, Law, Regulatory, and others to:, • Plan, schedule, and manage the process for gathering scope and cost for project aggregations at each stage gate from all disciplines., • Analyze cost estimates to verify that they are in-line with historical benchmarks for projects with comparable scope. Investigate rationale and drivers for estimates that are out-of-line with historical costs or expectations with estimators from functional groups, • Manage supporting documentation for stage gate updates and regulatory filings, • Peer review project aggregations. Operate with minimal supervision., • Develop Cost Estimates for new Transmission & Distribution Substations, Rebuild/Expansion of Substations, Major Equipment Replacements, Protection Upgrades/SA3, and new Customer Substations., • Prepare scope take‐off based on Design Specification, Meeting Minutes/Scope of Work, and Electrical & Civil drawings., • Estimate material & labor costs applied estimating standards for direct & indirect costs and prepare estimates into Cost Estimating Tools i.e., SCMT and InEight., • Collaborate among cross functional impacted stakeholders and utilized Engineering, Cost Estimating, Scheduling and Project Management knowledge to review cost estimates and obtained approvals., • Perform detailed variance analysis for cost estimates at various stages of project life cycle. Prepare & updated estimates based on change requests for scope, cost & Schedule. Required Skills/Abilities: • Minimum of one year construction industry experience., • Understanding of civil engineering principles, practices, and tools., • Proficient in computer-assisted design (AutoCAD) and other design, data recording, and analyzation software., • Ability to read, interpret and understand engineering plans and schematics, and soils reports., • Capability to visualize the finished grade production., • Knowledge of Best Management Practices (BMP)., • Understanding of materials, methods, and tools involved in the construction or repair of buildings., • Understanding of safety regulations related to assigned projects., • Ability to identify and solve complex problems., • Excellent verbal and written communication skills., • Ability to be both creative and analytical., • Extremely detail-oriented and accurate. Benefits Education and Experience: Bachelor's degree in civil engineering or eq required.

Job Description At Artisan West Appliance, we specialize in premium kitchen appliance solutions tailored to high-end remodels, custom homes, and the needs of discerning design professionals. As a curated, design-forward showroom, we are more than a retailer-we are a trusted partner to builders, designers, and architects across San Diego and beyond. We operate in a fast-paced, high-growth environment where creativity, collaboration, and excellence are the standard. Our product selection is intentionally curated, and our service model is highly personalized-earning us a reputation as a valued resource in the luxury home space. If you're energized by meaningful client interactions, passionate about residential construction and interior design, and driven to deliver results through tailored solutions, you'll thrive at Artisan West. Elevating the client experience is at the core of everything we do. We are seeking a dynamic, relationship-driven Outside Builder & Designer Account Representative to join our team and grow our presence within the design and build community. Key Responsibilities • Cultivate and manage a portfolio of builders, designers, contractors, and developers, acting as a trusted advisor and brand ambassador for Artisan West Appliance, • Provide strategic product recommendations, education, and luxury appliance solutions tailored to each project's scope and client needs, • Create accurate project bids, pricing proposals, and product packages, collaborating closely with internal and external teams to ensure seamless execution, • Build long-term, self-sustaining relationships within the design trade, leveraging customer insights and ongoing follow-up to support repeat and referral business, • Maintain detailed CRM records, manage pipeline activity, and report on sales performance, • Represent Artisan West at industry events, showroom appointments, and client meetings-becoming a visible and respected resource in the field, • Partner with operations teams to ensure project alignment, order accuracy, and timely communication throughout the sales cycle, • Stay current on industry trends, emerging brands, and category innovations through proactive learning and manufacturer trainings, • Exceptional interpersonal and communication skills-both written and verbal-with a strong sense of empathy and professionalism, • Highly organized with the ability to manage multiple accounts and deadlines in a fast-paced environment, • Self-starter with a proactive, solutions-oriented mindset and a collaborative approach to teamwork, • Experience working with (or managing relationships with) designers, architects, contractors, and developers, • 5+ years of successful sales experience, preferably in appliances, building materials, or interior design-related industries, • Trade or bachelor's degree preferred; advanced degree a plus, • Demonstrated track record of meeting or exceeding sales targets while maintaining exceptional client relationships, • Familiarity with CRM systems, quoting tools, and sales tracking applications Why Join Artisan West Appliance? • Represent premium, design-forward brands in a beautifully curated showroom, • Be part of a passionate, knowledgeable team dedicated to exceptional client service, • Build lasting relationships with some of the region's top design and building professionals, • Competitive compensation and growth potential within a respected and growing company

Job Description Employment Type: Full-Time | Hourly | Non-Exempt Pay Range: $30.00 - $37.00 Location: Vigor Marine CM San Diego, 1995 Bay Front Street, San Diego, CA 92113 Who We Are Vigor Marine CM San Diego, a Vigor Marine Group company, builds on the proud legacy of Continental Maritime of San Diego (CMSD) to stand as a vital force on San Diego’s working waterfront. As a certified Master Ship Repair Contractor for the U.S. Navy, our skilled professionals have successfully completed hundreds of ship repair and modernization projects for the Navy and Military Sealift Command. We perform maintenance and modernization on all classes of major surface vessels, including CVN, CG, and DDG, as well as amphibious ships such as LHD, LHA, LSD, LPD, and auxiliary ships. Our work spans a full range of Combatant, Hull, Mechanical and Electrical, and Habitability systems, supporting the readiness and mission success of the U.S. Fleet. Position Specifics Vigor Marine CM San Diego is currently seeking an experienced Quality assurance Inspector 3 to support our operations. The Quality Assurance Inspector (QAI) reports to the Quality Assurance Manager and is responsible for maintaining, implementing, and applying the Company’s quality systems. The position works from blueprints, diagrams, customer specifications, drawing or inspection instructions and checklists. The QAI is the principal point of contact relative to customer inspection personnel and ensures the Company and Subcontractors comply with specification requirements and document results via the appropriate system of record. Minimum Requirements • Strong background in quality assurance and environmental/health/safety programs, • Must be familiar with US Navy quality assurance requirements, • Must have demonstrated experience in execution and engineering support of test related functions, • Ability to plan and develop testing strategies based on extensive experience and judgement, • Ability to read technical drawings and interpret the Navy Engineering Operational Sequencing System (EOSS), • Familiar with commonly used shipboard concepts, practices, and procedures, • Exceptional understanding of the NAVSEA Standard Items and associated military and commercial regulatory requirements, • Must be able to read and interpret work specifications, standards, and references, • Must be available for unscheduled extended work hours and non-standard workweeks, • Desire to learn new industry-related activities, • Superb communication and time management skills, • Computer skills in work processing, databases, and spreadsheets, • Ability to get along with and foster good relationships among peers, supervisory, and customer personnel, • US Citizenship is required, • The ability to acquire a DBIDS credential is required, • NBPI and/or NACE certification required Physical Requirements • May be exposed to fumes, irritants, laser light, toxic chemicals, and potential electrical shock in an industrial or shipboard environment, • May involve gathering data while observing rotating or operating machinery, • Requires working in an industrial or shipboard environment, • Frequently moves throughout the yard, • Must be able to maneuver, ascend and descend stairs/ladders/ramps located inside various ships, • Ability to move more than 40lbs., • May be exposed to rapid changes in microclimates, industrial processes, and other environmental factors while collecting data, providing direction, and observing performance of task teams Our Commitment The Vigor Marine CM San Diego Management Team is committed to providing the necessary structure, tools, and environment for our employees. We act in the economic best interests of our customers and our company, in a professional, honest, and sincere manner. Our mission is accomplished through unwavering commitment to the following principles: • Teamwork, • Professional Conduct, • Integrity, • Total Quality, • Customer Satisfaction, • Open, honest communication at all levels, • Awareness of environmental issues, • Empowerment at every level Vigor Marine CM San Diego is an Equal Opportunity Employer of Veterans and individuals with disabilities. U.S. Citizenship may be required for certain positions. We offer excellent company-paid benefits and a savings plan. How to Apply In Person: Vigor Marine CM San Diego1995 Bay Front Street San Diego, CA 92113 Online:

Job Description Overview Who we are— Transcat is a dynamic, innovative, growing company that has been recognized as the leading calibration and compliance services provider in North America and beyond. With over 1,000 employees—in technical, consulting, operational, sales, finance, and corporate roles—we have stood the test of time by delivering on our Trust in Every Measure promise to our customers in vital industries, including life sciences, aerospace, defense, energy, and utilities. We fulfill this promise through our employees, who live Our Values every day, the Transcat Way. Our employees are at the center of the rewarding, challenging, and life-changing work we do for our customers and those they serve. Are you ready to join a company where the work you do makes a difference, and where you can grow in your career? Here’s what Transcat has to offer— • Work that matters., • A values-based culture where people care about each other and the work they do together., • Flexibility, • Training and development to accelerate learning and career advancement., • Competitive compensation and benefits, including paid time off, health insurance, tuition reimbursement, retirement, stock purchase plan, and MORE! Responsibilities Essential Duties and Responsibilities • Perform calibration work with little to no supervision, • Conduct independent research when necessary, • Coordinate and manage daily workloads without direction from manager, • Identify and utilize appropriate measurement techniques, • Maintain calibration standards, • Understand and apply uncertainties to measurements made, • Be able to read and interpret labs’ scopes of accreditation, • Work effectively with lab support staff, • Working knowledge and competency in at least four (4) disciplines and expert in one (1) discipline preferred, • Perform calibrations within a laboratory or customer on-site setting, • Work at customer on-sites with little to no direction, • Fulfill duties safely under working conditions, in keeping with Company requirements and standards, • Other duties as may be assigned, • Travel requirements: up to 50% of work schedule Primary Objectives • Learn and develop fundamental skills necessary to calibration techniques and processes, which includes high level production with minimal errors, • Develop team lead skills and responsibilities, • Develop skills necessary to train and advise lower-level technicians, • Develop skills necessary to advance to Tech III position, which includes a working knowledge and competency in at least six (6) disciplines and expert in two (2) disciplines, • Strive to obtain the ASQ/CCT or CMT certification, • Deliver on Transcat’s Quality Policy (QAC-F01-001) Qualifications Required Knowledge, Skills, Abilities, and Qualifications • Successful completion of assigned training materials through on-the-job training, online content, LMS, and classroom led instruction, • Strong interpersonal and customer service skills, • Excellent attention to detail, • Self-motivated learner with the ability to learn new skills related to calibration and calibration processes, • Ability to take direction and learn from feedback, • Ability to communicate well with supervisor, solve problems effectively, and work both independently and as part of a team, • 3+ years driving experience with a valid driver’s license and acceptable driver history Education and Experience Associates degree from college or technical school, or 3+ years related experience and/or training, or equivalent combination of education and experience Preferred: • Three+ (3+) years of commercial calibration experience, • Previous experience or training in electronics or machining, • Basic mathematical skills including algebra, geometry, and statistics, • Familiarity with basic hand tools, • Proficiency with Microsoft Office computer software including Word, Excel, and Outlook, • Basic organizational and time management skills, • Familiarity with basic hand tools, • Proficiency with Microsoft Office computer software including Word, Excel, and Outlook, • Advanced organizational and time management skills, • Experience in PMEL, PME, TMDE, Metrology, Calibration, ASQ CCT, METCAL, GPETE, Electronics, GCAMS, or Avionics The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. We will reasonably accommodate individuals with disabilities to perform the essential functions of the position. While performing the responsibilities of the job, the employee is required to read, write, talk, and hear. The employee is often required to sit and use their hands and fingers to handle tools and equipment. The employee is occasionally required to stand, walk, reach with arms and hands, climb or balance, and to stoop, kneel, crouch or crawl. Occasionally will be required to lift up to 75 lbs. Work Environment The work environment described here is representative of what an employee encounters while performing the essential functions of this job. While performing the duties of this job, the employee is regularly exposed to risk of electrical shock. The employee is frequently exposed to moving mechanical parts. The employee is occasionally exposed to wet and/or humid conditions; high, precarious places; fumes or airborne particles; toxic or caustic chemicals; outside weather conditions; and vibration. The noise level in the work environment is usually moderate. Equal Opportunity and Non-Discrimination Transcat is an equal-opportunity employer and prohibits discrimination based on any protected status. As required by United States law, all qualified applicants will receive consideration for employment without regard to age, color, disability, genetic predisposition or carrier status, national origin, race, religion, sex (including pregnancy, sexual orientation, and gender identity), status as a protected veteran, or as a member of any other protected group or activity under federal, state, and local law. We will make reasonable accommodations for employees with disabilities to enable them to perform the essential functions of their position unless doing so poses an undue hardship to the company or a direct threat to health or safety. Contingencies All offers of employment are contingent upon successfully completing all pre-employment requirements, which include verification of identity and employment eligibility, and when applicable, a motor vehicle driving record report. #ZR

Job DescriptionSummary Our client, a leading mechanical contractor, is seeking an experienced Mechanical Construction Project Manager to join their team in San Diego, CA. With nearly a century of proven customer commitment and ownership, they operate with the highest safety standards for employees and clients alike. Their services include industry-leading Building Information Modeling (BIM), design/build solutions, sustainable practices, commercial HVAC services, and complex mechanical and industrial system installations. This role will oversee mechanical construction projects—ensuring they are completed safely, on time, and within budget—across a range of markets including Healthcare, Life Sciences, Commercial, Industrial, and more. Duties and Responsibilities The Project Manager will be responsible for: * Ensuring the safety of field personnel assigned to projects * Overseeing field labor productivity, quality control, and project coordination * Managing project financial performance, forecasts, and reporting * Procuring materials and equipment * Administering change orders and maintaining strong client relationships * Managing project cash flow and personnel * Complying with all company operating policies, procedures, and plans Additional duties may be assigned. Project Managers are expected to oversee and direct their teams effectively and be available during the working hours of any direct reports. Qualifications & Requirements To be successful in this position, the candidate must be able to perform each essential duty effectively. The requirements below outline the knowledge, skills, and abilities necessary. Reasonable accommodations will be considered for individuals with disabilities. • Computer Skills Microsoft Suite (Excel, Word, Project, Access, PowerPoint) * Bluebeam Revu (PDF editing) * Vista-Viewpoint (Project Management & Accounting Software) * Quotesoft Estimating Software • Required Attributes Strong written and verbal communication skills * Ability to prioritize in a fast-paced, multi-tasking environment * Proficiency in basic business mathematical functions * Ability to work with minimal supervision * Strong time management and attention to detail * Ability to interpret instructions in written, oral, diagram, or schedule form * Organizational skills for handling and archiving technical documentation * Adherence to all operating policies, procedures, plans, and programs • Education & Experience 3–7 years of construction-related experience and/or * Bachelor’s degree in Mechanical Engineering or Construction Management Our client offers a competitive salary, a comprehensive benefits package, and opportunities for professional growth. They welcome skilled individuals who can contribute to their continued success. Equal Opportunity Employer/Veterans/Disabled.

Job DescriptionDescription PRIMARY FUNCTION The Plumbing Lead Estimator partners with preconstruction team through the development of cost estimates, value management, and estimate proposal reports. This position is responsible for preparing and providing complete Plumbing Estimates for the company in partnership with the Division Vice President and reports directly to the Division Preconstruction Manager and / or Division Vice President. The successful candidate will have a strong background in commercial plumbing estimating, extensive knowledge of industry standards and regulations, and the ability to identify and engage with prospective clients. TYPICAL DUTIES • Prepare complete Plumbing estimates / proposals from start to finish utilizing Company’s latest Estimating platforms. Establish projects estimating database, perform take-off, solicit vendor and subcontractor’s quotes, recap the estimate, and prepare proposal letter with qualifications/exclusions as applicable., • Prepare project proposals/presentations which exhibit the Company’s capabilities (i.e. coordination, engineering, etc.) and specific understanding for the project being pursued., • Provide guidance / Oversight to Support Staff as necessary specific to project estimates / proposals., • Identify and manage client entertainment based on work opportunities in pursuit of ideal engagements aligned to business goals and objectives. Pursue business opportunities with existing customers and new customers on a select basis., • Review project proposals to determine scheduling, funding limitations, alternate means and methods, procedures for design, staffing requirements, and allotment of various resources to project phases., • Ensure fairness and integrity in contract and vendor negotiations when needed., • Develop and maintain relationships with subcontractors and partners., • Attend and participate in both company and outside sponsored events and business seminars. Qualifications Required • 5+ years of experience in commercial plumbing estimating, • Advanced proficiency in Quickpen / Auto Bid estimating platform, • Advanced proficiency in Excel, • Advanced proficiency in Microsoft Office products and other software products (softphones, shared drives, etc.) Physical Requirements • Prolonged periods of sitting at a desk., • Must be able to lift to 15 pounds at times., • Ability to traverse uneven surfaces, climb ladder, and walk up and down stairs.

Job Description Come grow with us... At Murray Company, how we operate is defined by shared values that are 100 years in the making -Safety, Quality, Honesty, Hard Work and Pride of Ownership. These values have led to our company consistently being in the top 15% on ENRs Best Specialty Contractor’s list. Bring your enthusiasm and unique perspective to Murray Company where you will have the opportunity to grow with us professionally, personally, and financially. Join a team that cares about helping you thrive and succeed. You'll work alongside talented colleagues while establishing lifelong friendships and making a difference in our company and the specialty contracting community. As a part of Murray Company, you'll build long-term wealth by enjoying employee-ownership, great compensation, health & wellness benefits, and matched 401(k) retirement plan. Position Summary The Plumbing Lead Estimator partners with preconstruction team through the development of cost estimates, value management, and estimate proposal reports. This position is responsible for preparing and providing complete Plumbing Estimates for the company in partnership with the Division Vice President and reports directly to the Division Preconstruction Manager and / or Division Vice President. The successful candidate will have a strong background in commercial plumbing estimating, extensive knowledge of industry standards and regulations, and the ability to identify and engage with prospective clients. Key Responsibilities • Prepare complete Plumbing estimates / proposals from start to finish utilizing Company’s latest Estimating platforms. Establish projects estimating database, perform take-off, solicit vendor and subcontractor’s quotes, recap the estimate, and prepare proposal letter with qualifications/exclusions as applicable., • Prepare project proposals/presentations which exhibit Murray Company’s capabilities (i.e. coordination, engineering, etc.) and specific understanding for the project being pursued., • Provide guidance / Oversight to Support Staff as necessary specific to project estimates / proposals., • Identify and manage client entertainment based on work opportunities in pursuit of ideal engagements aligned to business goals and objectives. Pursue business opportunities with existing customers and new customers on a select basis., • Review project proposals to determine scheduling, funding limitations, alternate means and methods, procedures for design, staffing requirements, and allotment of various resources to project phases., • Ensure fairness and integrity in contract and vendor negotiations when needed., • Develop and maintain relationships with subcontractors and partners., • Attend and participate in both company and outside sponsored events and business seminars. Qualifications Required • 5+ years of experience in commercial plumbing estimating, • Advanced proficiency in Quickpen / Auto Bid estimating platform, • Advanced proficiency in Excel, • Advanced proficiency in Microsoft Office products and other software products (softphones, shared drives, etc.) Physical Requirements • Prolonged periods of sitting at a desk., • Must be able to lift to 15 pounds at times., • Must have visual acuity to see and interpret detailed construction drawings on computer screens and on paper., • Must be able to traverse uneven surfaces on project sites and climb stairs to access project site temporary offices. Compensation $85,000.00 - $125,000.00 per year Total Rewards Murray Company offers a generous total rewards package to include no less than a 15% Employee Stock Ownership (ESOP) contribution annually on top of a discretionary cash bonus program. Additional benefits include a 3% 401(k) match, 100% company-paid medical coverage for employee (up to 2/3 for family), company provided life insurance, optional vision and dental insurance, and more. Murray Company 3rd Party Recruiter Engagements Murray Company does not accept unsolicited resumes or candidate profiles from third-party recruiting agencies or individual recruiters in response to job postings. Resumes submitted to any employee of Murray Company without a signed agreement by an officer of the company (or his or her delegate) AND without the express written agreement by the Talent Acquisition or Human Resources function to engage in a search on behalf of the company will become property of Murray Company. Verbal or written commitments from any other remember of Murray Company will not be considered binding terms. Murray Company will not pay a fee to any third-party recruiting firms or individual recruiters that have not coordinated their recruiting activity through the Talent Acquisition or Human Resources function.

Job Description Production Managers at LandCare are crucial members of our operations team. Production Managers lead the frontline crews to ensure quality, efficiency, and safety while creating beautiful landscapes that inspire our clients. This position oversees production planning, cost estimation, materials procurement, and is directly involved with the hiring and training of crew members. WHAT WILL YOU BE DOING? Landscape Quality and Efficiency • Partner with Account Manager and clients to perform landscape quality audits to review landscape quality, task execution, identify maintenance needs, and recommend enhancement opportunities, • Create detailed job service plans for each client using LandCare’s Aspire software system, • Provide production planning, oversight and guidance to supervisors and team members on client jobsites to drive customer satisfaction with timely and effective service, • Identify opportunities to improve production methods and provide additional training to team members, • Oversee hiring and staffing needs of the business to ensure teams are appropriately staffed, • Demonstrate ongoing leadership of a safety-oriented culture and hold all team members accountable for following safety procedures, • Educate and train crew members on a variety of safety topics Besides the great team environment and the ability to work outside, we also have a strong benefits package for our team members: • Competitive base salary, • Team based profit sharing program, • 401K for all employees with 3.5% company match, • Company-provided vehicle, • Medical, dental, and vision coverage, • Paid Time Off Policy + 9 corporate holidays, • Formal training and development program This opportunity has a base range that represents a full-time annual salary starting at $70,000+ (commensurate with experience).

Job Description Summary Our client, a top mechanical contractor with nearly 100 years of excellence in customer service and employee ownership, is seeking an experienced Senior Mechanical Construction Project Manager for their San Diego, CA location. Renowned for upholding the highest safety standards and delivering exceptional quality, they provide design/build services, sustainable solutions, commercial HVAC, advanced mechanical and industrial system installations, and cutting-edge Building Information Modeling (BIM). This position will oversee large-scale mechanical construction projects—ensuring safe, on-time, and within-budget delivery—across multiple sectors, including Healthcare, Life Sciences, Commercial, and Industrial markets. Duties & Responsibilities * Lead all phases of the project lifecycle, including preconstruction/design-assist, execution, and close-out * Ensure safety, productivity, and efficiency of field personnel * Manage schedules, budgets, cash flow, cost projections, and reporting * Oversee procurement of materials and equipment and administer change orders * Maintain quality control, contract compliance, and project documentation * Serve as the primary point of contact for owners, clients, subcontractors, and vendors * Drive financial performance, cost control, and timely billing * Mentor and lead project teams, ensuring accountability and professional growth * Enforce company policies, procedures, and safety programs throughout the project Qualifications & Requirements • Education & Experience 10+ years of project management experience in mechanical contracting * 5+ years in industrial projects and design-assist roles * Proven success managing projects valued between $15M–$200M * Experience in healthcare, data centers, labs, higher education, or semiconductor environments * Bachelor’s degree in Construction Management or Engineering preferred • Technical & Computer Skills Proficiency with MS Project, Microsoft Office Suite, and Viewpoint * Strong business mathematics and analytical abilities • Core Attributes Exceptional written and verbal communication skills * Ability to prioritize, multitask, and work independently in a fast-paced setting * High attention to detail and accuracy when interpreting oral, written, diagram, and schedule-based instructions * Collaborative and professional approach with consistent adherence to company policies Benefits & Compensation * Salary range: $155,000–$175,000 * Comprehensive benefits including health, dental, life, and long-term disability insurance * 401(k) with company match and Employee Stock Purchase Plan * Paid holidays, vacation, and sick leave Equal Opportunity Employer – Veterans and individuals with disabilities are encouraged to apply.

Job DescriptionDescription: This position is currently filled, however we are accepting applications for Ready Replacement Pool consideration. Prevailance is seeking a dedicated and experienced Diesel Engine Inspector Contractor Instructor (DEI CI) to support the Surface Warfare Schools Command (SWSC). This role involves delivering high-quality technical and military training to Department of Defense (DOD) personnel, including Navy and Allied Forces officers and enlisted personnel temporarily assigned for training. Key Responsibilities: • Provide instruction, testing, remediation, and curriculum support, including updates and maintenance of course materials, • Operate and maintain training equipment, training aids, and lab tools, • Ensure the safe delivery of training content and oversee compliance with safety standards, • Minimum of three (3) years of technical experience in diesel engine inspection processes, • At least two (2) years of experience in a Military Training Environment, • Graduate of:, • Diesel Engine Core (A-652-0320), • Comprehensive knowledge of diesel engine inspection processes and safety protocols, • Certified as an instructor in the Diesel Engine Inspector functional area Prevailance, Inc. proudly supports veterans as a member of the V3 (Virginia Values Veterans) program and the Hire Vets initiative. Recognized as a Top Workplace in 2025, Prevailance fosters a supportive, mission-driven environment for its team members. We provide a comprehensive benefits package to eligible employees, designed to support health, wellness, and financial security. Our benefits include: • Medical Insurance, • TriCare Supplemental, • Dental Insurance, • Vision Insurance, • Life & Accidental Death & Dismemberment (AD&D) Coverage, • 401(k) Plan with Company Matching Contributions, • Paid Time Off (PTO), • 11 Paid Holidays, • Education Reimbursement Program

Job DescriptionOverview An established general contractor is seeking an experienced Commercial Superintendent to lead field operations for a high-end, $25M+ commercial project. Roughly 75% of the work remains, including site improvements, utility coordination, foundation tie-ins, and premium interior finishes. This role is ideal for a Superintendent who thrives in complex, fast-paced environments — particularly on tight sites with intricate logistics and high-end architectural details. The right candidate will bring strong leadership, communication, and field coordination skills to ensure top-quality results. Key Responsibilities * Oversee all onsite construction activities from groundwork through final punch list, ensuring safety, schedule, and quality standards are met. * Manage subcontractor performance, site logistics, equipment, and material deliveries within limited space constraints. * Direct the completion of civil, structural, and utility scopes, coordinating closely with design and engineering teams. * Lead the installation of premium architectural finishes, millwork, and specialty interiors with precision and attention to design intent. * Maintain a clean, organized, and safe jobsite that reflects the professionalism of the team and the client’s expectations. * Serve as the primary field liaison for owners, architects, engineers, and vendors to resolve construction challenges and maintain progress. * Use Procore (or similar software) to track RFIs, submittals, daily reports, photos, change orders, and punch list items. * Partner with the Project Manager to maintain accurate schedules, manpower forecasts, and project documentation. * Support the transition into future project phases and potential additional developments on the same site. Qualifications * 7+ years of experience as a Superintendent in commercial or institutional construction. * Proven ability to manage projects with challenging site conditions and aggressive schedules. * Strong understanding of site development, foundation systems, and complex utility coordination. * Demonstrated success managing high-end interiors and architectural finish scopes. * Proficiency with Procore, Microsoft Office, and scheduling software such as MS Project. * Strong written and verbal communication skills, with the ability to lead diverse field teams and engage directly with clients. * Commitment to safety, quality, and on-time project delivery. Compensation & Benefits * Competitive salary commensurate with experience * Comprehensive medical, dental, and vision coverage * 401(k) with company match * Paid holidays and generous PTO * Performance-based bonus eligibility * Opportunity for long-term growth with future project phases

Job Description ABOUT ALVEST EQUIPMENT SERVICES (AES) Alvest Equipment Services (AES) is a trusted leader in ground support equipment (GSE) maintenance, rental, and overhaul services. As part of the global ALVEST Group, AES operates in 10 countries and continues to expand, delivering high-quality service solutions that keep airport operations running smoothly. In North America, AES USA has the largest presence within the company, providing comprehensive GSE support across the U.S. and Canada. Our team of skilled mechanics and industry professionals are committed to maximizing equipment reliability, reducing downtime, and ensuring operational efficiency for our customers. WHY CHOOSE AES? At AES, we are more than a service provider—we are a trusted partner in keeping aviation moving. We offer: • A dynamic and growing company with global reach and local impact, • Exciting career opportunities with room for growth and development, • A culture of innovation, safety, and collaboration At Alvest Equipment Services, we look for mechanics who not only enjoy using their skills in troubleshooting hydraulic, electrical or HVAC issues but like having fun while doing so! We foster an environment where teamwork and ingenuity are rewarded and encourage job growth. Those who will excel in this role: Automotive, Diesel, Forklift and Heavy Equipment Mechanics. Compensation: The expected pay rate for this position is $34.00 - $37.00 per hour. The actual pay rate offered may vary on multiple factors including, but not limited to, experience, knowledge, skills, certifications and/or location. Work Schedule Shift: 7:00am - 3:30pm Monday - Friday WHAT WE OFFER • Flight benefits that include savings on airfare, hotel and rental cars, • 11 Paid Holidays + Your Birthday, • PTO – Minimum 3 weeks per year, • Annual Profit Sharing Bonus, • 401(K) and Roth Matching, • Medical, Dental and Vision, • Company Provided Short Term and Long Term Disability Insurance, • Company Paid Life Insurance & Accidental Death and Dismemberment, • Employee Assistance Program, • Tuition Reimbursement, • Employee Referral Bonus – $1,000, • Earn more by completing your ASE certifications in T-Series Medium/Heavy Equipment or A-Series Light Truck and receive a one-time bonus for becoming a Certified Master Technician. As an employee, the first test attempt paid for by AES. You’ll maintain and repair various ground support equipment (GSE), including tow tractors, belt loaders, pushback tractors, deicers, and more. You’ll troubleshoot mechanical, electrical, hydraulic, and HVAC systems and ensure proper documentation, safety, and quality standards are met. Position is based at the San Diego International Airport (SAN). WHAT YOU WILL DO • Diagnose and repair mechanical, electrical, hydraulic, and HVAC systems, • Perform preventative maintenance and inspections, • Use Maintenance Information Systems (MIS) to document all repairs, • Follow safety and regulatory standards (OSHA, EPA), • 1–4 years’ experience in mechanical, hydraulic, pneumatic, or HVAC systems, • Diesel, automotive, or heavy equipment repair background, • Strong troubleshooting skills and computer proficiency, • Ability to lift 50+ lbs and work in all weather conditions, • Must provide own hand tools, • Strong communication skills, • Must be 18+, eligible to work in the U.S., and possess a valid driver’s license, • Team player with the ability to work independently, • Med/Heavy Truck or Light Truck Automotive Service Excellence (ASE) certification preferred.

Job Description Solid Rock Recruiting - #1 Specialty Recruiting Firm in the USA Exciting Opportunity: Commercial Drywall Estimator Wanted! Solid Rock Recruiting has partnered with a TOP drywall contractor in the Southeast Bay Area. With over 40 years of combined industry experience and an outstanding reputation for excellence, our client has established themselves as a preferred contractor for prestigious commercial projects throughout the region. Position: Commercial Drywall Estimator The Opportunity: Join an established industry leader specializing in high-end commercial projects. As their Estimator, you'll play a crucial role in bidding on significant projects valued at over $1MM, focusing on metal stud framing, and drywall systems.. What You'll Do: • Prepare accurate and competitive estimates for commercial drywall/division 9 packages exceeding $1MM., • Collaborate with project managers, clients, and subcontractors to gather essential project details., • Utilize On-Screen Takeoff Software to perform detailed quantity takeoffs and cost analysis., • Analyze project specifications and drawings to ensure comprehensive bid proposals., • Maintain strong relationships with suppliers and subcontractors to obtain competitive pricing. What We're Looking For: • Proven experience as an Estimator in the commercial drywall and/or commercial plaster sector., • Proficiency in On-Screen Takeoff Software is essential., • Strong analytical skills and attention to detail., • Excellent communication and negotiation abilities., • Ability to manage multiple bids and meet tight deadlines. Why Join Us? • Work on challenging projects that push your skills to new heights., • Enjoy a supportive work culture that encourages professional growth and development., • Competitive salary and benefits package. Contact Us: If you're ready to take your career to the next level and be part of something great, apply today! We can't wait to meet you and explore the amazing things we can achieve together. For more information, please contact John Chisham at We are an equal opportunity employer and welcome applicants from all backgrounds. We are committed to creating an inclusive environment for all employees and do not discriminate on the basis of race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, disability, age, or veteran status.

Job DescriptionDevelop the West Coast’s Premier Retail and Healthcare Projects - Join us and bring landmark properties to life! Base, bonuses, benefits, and sign on bonus! This Jobot Job is hosted by: Chris Gorman Are you a fit? Easy Apply now by clicking the "Apply Now" buttonand sending us your resume. Salary: $135,000 - $160,000 per year A bit about us: We are a full‑service real estate development and construction firm delivering more than three decades of construction expertise in commercial developments across California. We’re seeking a dynamic Senior Estimator with experience in Commercial projects in San Diego. This role also requires strong sales acumen and comfort with face-to-face client interactions. As part of our dynamic team, you will play a key role in securing new business opportunities while ensuring accuracy, competitiveness, and alignment with company standards. Why join us? • Competitive base pay and overall compensation package, • Full benefits: Medical, Dental, Vision, • Generous PTO, vacation, sick, and holidays Job Details Responsibilities: 1. Preparing comprehensive and accurate cost estimates for commercial and retail projects., 2. Analyzing blueprints, specifications, proposals, and other documentation to prepare time, cost, and labor estimates., 3. Collaborating with project managers, engineers, and architects during the cost estimation process., 4. Reviewing design options and recommending best solution based on cost, engineering quality, or availability of materials., 5. Assessing cost effectiveness of products, projects or services, tracking actual costs relative to bids as the project develops., 6. Conducting risk analysis and providing strategies to mitigate them., 7. Utilizing estimating software systems to maximize efficiency and accuracy., 8. Keeping abreast of industry trends and advancements in construction technology., 9. Participating in proposal presentations and client meetings. Qualifications: 1. A minimum of 4 years of experience as a Estimator in the construction industry., 2. Proven experience in commercial projects., 3. Proficiency in using estimating software systems(e.g., PlanSwift, Bluebeam, CostX) and MS Office suite., 4. Exceptional analytical and mathematical skills, with high levels of accuracy., 5. Excellent communication and negotiation skills., 6. Ability to work under pressure and meet tight deadlines., 7. Strong understanding of construction processes, materials, and legal regulations. Interested in hearing more? Easy Apply now by clicking the "Apply Now" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policyCompany DescriptionJobot is on a mission to connect good people with good jobs. By combining AI-powered technology with the expertise of Jobot Pros, our experienced recruiters, we help you find career opportunities that align with your goals and values. Founded in 2018 and employee-owned since 2024, Jobot is committed to fostering a culture of kindness, respect, innovation, and connection. As an industry leader, we’ve been recognized as a top workplace by Forbes, Fortune, USA Today, and Staffing Industry Analysts (SIA). Ready to find a good job? Create your profile today at Jobot.com.Jobot is on a mission to connect good people with good jobs. By combining AI-powered technology with the expertise of Jobot Pros, our experienced recruiters, we help you find career opportunities that align with your goals and values.\r\n\r\nFounded in 2018 and employee-owned since 2024, Jobot is committed to fostering a culture of kindness, respect, innovation, and connection. As an industry leader, we’ve been recognized as a top workplace by Forbes, Fortune, USA Today, and Staffing Industry Analysts (SIA).\r\n\r\nReady to find a good job? Create your profile today at Jobot.com.

Job Description Position: Clinical Technician Type: Hourly, Full-Time, Non-Exempt Compensation: $21-23 hourly Benefits: • Health Insurance (Medical, Vision, Dental), • PTO (Vacation, Sick), • AM (6:30am-3:00pm), • PM (2:30pm-11:00pm), • Client Care: Support patients struggling with addiction and mental health disorders through daily activities and programming, appointments, and crisis intervention., • Safety Checks: Conduct regular physical checks on all patients within care (a.k.a. “rounds”)., • Intakes & Discharges: Play a leading role in patient intakes and discharges from the treatment facility, ensuring all clients feel comfortable and welcome., • Medication Observation: Monitor and document client self-administration of medications in accordance with the facility’s policies and procedures., • Group Facilitation: Participate in and facilitate applicable group sessions (e.g. life skills, art therapy, outings, etc.)., • License/Credentials: RADT, SUDRC, or RAC (required), • Candidates with EMT/CMA/CNA who are willing to get their RADT/SUDRC/RAC are encouraged to apply., • These registrations require only a 9-hour online course and proof of enrollment is sufficient to start. RADT (Registered Alcohol and Drug Technician) is offered through CCAPP. SUDRC (Substance Use Disorder Registered Counselor) is offered through CADTP. RAC (Registered Addiction Counselor) is offered through CAADE., • Education: High School Diploma / GED or Bachelor’s Degree (preferred), • Experience: 1+ years of behavioral healthcare experience (preferred), • Compassion for clients and employees in all interactions, • Strong professional ethics, boundaries, and integrity, • Positive attitude and emotional composure Akua Behavioral Health is California’s leading mental health and substance abuse treatment center. We provide our clients with individualized, compassionate treatment from Master’s and Doctorate level clinicians across various levels of care at fully licensed and accredited facilities throughout Northern and Southern California. To give our clients the best chance at lasting recovery, we pioneered an integrative East-meets-West approach that combines Western evidence-based treatment with holistic Eastern traditions to treat the mind, body, and spirit. Our mission is to create an environment of healing and transformation for each client seeking change. Company DescriptionAkua Behavioral Health is California’s leading mental health and substance abuse treatment center. We provide our clients with individualized, compassionate treatment from Master’s and Doctorate level clinicians across various levels of care at fully licensed and accredited facilities throughout Northern and Southern California. To give our clients the best chance at lasting recovery, we pioneered an integrative East-meets-West approach that combines Western evidence-based treatment with holistic Eastern traditions to treat the mind, body, and spirit. Our mission is to create an environment of healing and transformation for each client seeking change.Akua Behavioral Health is California’s leading mental health and substance abuse treatment center. We provide our clients with individualized, compassionate treatment from Master’s and Doctorate level clinicians across various levels of care at fully licensed and accredited facilities throughout Northern and Southern California. To give our clients the best chance at lasting recovery, we pioneered an integrative East-meets-West approach that combines Western evidence-based treatment with holistic Eastern traditions to treat the mind, body, and spirit. Our mission is to create an environment of healing and transformation for each client seeking change.

Job DescriptionBenefits: • Dental insurance, • Free food & snacks Were looking for a reliable and motivated Field Technician to join our Managed Services Provider (MSP) team. This position requires frequent travel, with up to 4 hours of driving per day and occasional overnight stays (covered under per diem). The ideal candidate will independently manage a schedule of site visits, perform hands-on IT maintenance, conduct asset audits, verify device compliance, and resolve basic technical issues on-site. Follow the site for job updates Responsibilities Travel & Field Work • Drive up to 4 hours per day; some days may be fully dedicated to travel., • Use a personal vehicle (mileage reimbursement provided)., • Stay overnight when required (expenses covered under per diem)., • Begin and end most workdays at our Mission Valley office.On-Site Support & IT Maintenance, • Independently manage and maintain a schedule of site visits, with central team approval., • Address Tier 1 field tickets promptly and efficiently., • Maintain clear communication with the central team about ongoing or unresolved site issues., • Use Microsoft Intune, RMM, and other MDM tools to verify device compliance., • Ensure all devices are online, internet-connected, and up to date., • Coordinate with the internal team for tasks requiring on-site presence.Asset Management & Inventory Control, • Perform regular asset audits and inventory checks, confirming device counts., • Transfer devices between MDM/RMM systems as needed., • Conduct basic workstation upkeep, including cable management and workspace organization.Reporting & Compliance, • Confirm device maintenance and resolve outstanding maintenance tickets., • Accurately close and verify tickets within the system., • Submit daily quantitative reports that include:, • Number of assets serviced, • Number of assets audited or inventoried, • Number of staff assisted, • Number of tickets resolved, • Practice safe and responsible driving while traveling to client locations.Qualifications:, • Associate degree in Information Technology or related field (Bachelor's degree preferred)., • At least 1 year experience in hands-on Helpdesk with over 100 computers\users., • New graduates with a technology or cybersecurity degree are welcome to apply., • Proven experience in a help desk or technical support role., • Proficient in troubleshooting hardware, software, and network issues., • Familiarity with Active Directory and Microsoft Office 365., • Strong customer service and communication skills., • Ability to work independently and prioritize tasks effectively., • Candidates must reside within a maximum 30-minute commute to San Diego, CA., • Eligible candidates will be subject to a background verification process., • Excellent written and verbal communication skills and professional demeanor when interacting with clients., • Maintain a clean and presentable appearance., • A valid driver's license and a clean driving record are mandatory., • Reliable transportation is essential., • Ability to produce precise, concise, accurate documentation, notes, and reports., • CompTIA A+, Microsoft Certified IT Professional (MCITP), or similar certifications are a plus.

Job Description Associated Health Professionals is looking for MRI Technicians for a busy, large, acute care, multi-disciplinary Hospital in La Jolla, CA Must have a minimum of 2 years paid experience working in a hospital setting This is a new 5 year contract and is a long term assignment (not 13 weeks) Pay is $71/hour-Stipend available! We are looking for full and part time MRI Techs and can work with your schedule! Shifts available: Monday-Friday 6am-2:30pm, Saturday and Sunday 6am-2:30pm, 2pm-10:30pm Benefits available upon request Company DescriptionAbout Associated Health Professionals: AHP is an award-winning staffing company with unwavering commitment to excellence connecting highly qualified job seekers with once in a life time opportunities. We offer contract, temporary and permanent placement solutions for Healthcare in administration, finance and accounting, customer support roles, clinical and non-clinical positions. Company website: Associated Health Professionals:\r\n\r\nAHP is an award-winning staffing company with unwavering commitment to\r\n\r\nexcellence connecting highly qualified job seekers with once in a life time opportunities. We offer\r\n\r\ncontract, temporary and permanent placement solutions for Healthcare in administration, finance\r\n\r\nand accounting, customer support roles, clinical and non-clinical positions.\r\n\r\nCompany website:

Job Description Job Title: Engine Mechanic Client: Aerospace Industry Duration: 6 Months (Temp to Hire) Location: San Diego, CA 92121 Shift: 2nd Shift (12:00 PM – 8:30 PM) Job Summary: The Engine Mechanic I is an entry-level role responsible for assisting in the disassembly, inspection, repair, and reassembly of aero-derivative gas turbine engines. The position offers hands-on learning under the supervision of senior mechanics and subject-matter experts in a precision aerospace maintenance environment. Key Responsibilities: • Support engine disassembly, repair, and assembly processes following established work instructions., • Assist in preparing, cleaning, and visually inspecting engine parts and tools., • Learn and apply manufacturing methods and repair techniques through on-the-job training., • Review sketches, technical drawings, and related documents to support work accuracy., • Ensure all tasks comply with Environmental, Health, Safety, and Quality (EHSQ) standards., • Maintain punctuality, professionalism, and adherence to company values., • Perform other duties as assigned by leadership. Qualifications: • High School Diploma or equivalent required., • Technical education or training in a related field preferred., • Hands-on experience with gas turbine engines a plus., • Basic understanding of manufacturing principles and data systems., • Must be a U.S. Citizen or Green Card holder (per FAA requirements)., • Willingness to work 2nd shift. #ZR Company DescriptionAs a leading contract, contract-to-hire and professional placement firm, Three Point Solution understands the importance of aligning our client with the right resource at the right time. We are committed to the highest caliber of service that will benefit our clients, candidates and employees. Unlike large, corporate style recruiting firms, we commit to individualized attention that uniquely positions us to bridge the communication gap between recruiter, employer and candidate. Our goal is to cultivate and maintain true partnerships with our clients and candidates.As a leading contract, contract-to-hire and professional placement firm, Three Point Solution understands the importance of aligning our client with the right resource at the right time. We are committed to the highest caliber of service that will benefit our clients, candidates and employees. Unlike large, corporate style recruiting firms, we commit to individualized attention that uniquely positions us to bridge the communication gap between recruiter, employer and candidate. Our goal is to cultivate and maintain true partnerships with our clients and candidates.

Job Description Job Summary Commercial Van Interiors, a nationally known upfitter of commercial equipment, is looking for someone with a strong work ethic to work in a fast-paced shop environment. Some of the responsibilities will include assembly and installation of van and truck tool boxes, ladder racks, shelving packages, and various lighting and electrical components. Applicants must be capable of maintaining a clean environment in the shop, follow all safety rules, and operate all company equipment in a safe manner using required safety equipment. Tools and equipment are provided by CVI. Supervisory Responsibility This position has no current supervisory responsibilities, but we are always looking to promote leaders from within the company. Work Environment This position requires that team members can stand, kneel, or bend over while working on vehicles and lift up to 50 pounds frequently throughout the day. Position Type/Expected Hours of Work This is a full-time position, and hours of work are Monday through Friday, 8:00 a.m. to 4:30 p.m. Travel Only local occasional travel is expected for this position. Required Education and Experience • 18 years old with a valid state driver’s license and clean driving record, • Must be able to pass a drug screen and background check, • Must be able to read, understand, and follow detailed written instructions as provided by the manufacturer’s suppliers. Preferred Education and Experience • Previous vehicle installation or repair experience Benefits • Medical- Eligible at 30 days, • Dental- Eligible at 30 days, • Life- Eligible at 30 days, • Flex Benefits, • Vacation accrual after 90 days, • 401k after one year, • Profit Sharing after one year, • Commercial Van Skills Training Program is provided and Educational assistance is available., • Salary increase of $1.00 per hour after completion of 90 days. AAP/EEO Statement All recruiting, hiring, training, promotion, compensation, and other employment related programs are provided fairly to all persons on an equal opportunity basis without regard to race, creed, color, religion, sex, age, veteran status, disability, national origin, or any other protected status based on local or national law. Job Type: Full-time Benefits: • 401(k), • Dental insurance, • Health insurance, • Life insurance, • Paid time off, • Vision insurance Schedule: • 8 hour shift Supplemental Pay: • Bonus opportunities Work Location: In person

Job Description We are currently accepting applications for a Customer Service Plumber. The Customer Service Plumber will work as a representative of Pacific Production Plumbing and address warranty issues in newly built tract homes. Daily interactions with homeowners, builder reps, and field personnel will be necessary to resolve these issues. The ideal candidate will possess a professional attitude, extensive knowledge in New Construction Plumbing Installation and the presence of mind to address recurring issues. A valid driver's license with a clean driving record is required in order to operate a company vehicle. This position requires being on-call on a rotational basis of one week every four weeks. Pacific Production Plumbing offers: • Hourly Wages, • Weekly Pay, • Paid Holidays, • Paid Time Off, • Medical, • Dental, • Life Insurance, • 401K, • Company Vehicle with Fuel Card

Job Description Job Summary: We are seeking motivated and detail-oriented Assemblers to join a high-performance team focused on manufacturing custom wire harnesses. This is a hands-on position requiring attention to detail, the ability to follow technical diagrams, and a strong commitment to quality. Assemblers will be responsible for creating sub-assemblies and full harness builds using both hand and power tools in a team-based environment. Key Responsibilities: • Pull wire from racks and cut to specific lengths per diagram specifications, • Terminate wires using hand and machine terminal crimpers, • Assemble connectors by hand according to provided diagrams, • Perform quality inspections of sub-assemblies before moving to final assembly, • Use harness boards to add additional wires, terminals, and fuse blocks, • Conduct final quality checks prior to loom and tape application, • Box, label, and log completed harnesses for shipping, • Maintain clean and organized workspaces, • Attention to detail – zero tolerance for defects; product safety is critical, • Manual dexterity – ability to use hand tools and crimpers effectively, • Ability to follow diagrams and schematics, • Team player – able to work independently while contributing to a small team, • Physical stamina – ability to stand for extended periods and lift up to 50 lbs, • Prior experience in wire harness assembly or similar manufacturing roles, • Basic understanding of electrical components and vehicle wiring, • Familiarity with quality control standardsCompany DescriptionPrideStaff is a national staffing organization, delivering innovative solutions to the challenges employers face every day. Over the years, PrideStaff has been a consistent industry leader, developing technology and service processes that allow our organization to deliver superior performance. With locations across the United States, we're well positioned to partner with clients and candidates to ensure a successful match of employee talent with customer needs. When it comes to your success, we leave nothing to chance! Our Mission: Consistently provide client experiences focused on what they value most.PrideStaff is a national staffing organization, delivering innovative solutions to the challenges employers face every day. Over the years, PrideStaff has been a consistent industry leader, developing technology and service processes that allow our organization to deliver superior performance. With locations across the United States, we're well positioned to partner with clients and candidates to ensure a successful match of employee talent with customer needs. When it comes to your success, we leave nothing to chance! \r\n\r\nOur Mission: Consistently provide client experiences focused on what they value most.

Job Description A successful candidate can adapt to a variety of work environments and quickly solve problems. Their main responsibility is to provide excellent customer service while maintaining equipment, with specific duties including: • Repair Trucks and various types of equipment, • Perform quality control inspections before releasing unit back to customer, • Installing or upgrading customer owned equipment in various field locations, • Configuring hardware and software components after installation, • Performing routine maintenance on equipment, • Use diagnostic tools to test equipment to troubleshoot issues, • Documenting installation and repairs, • Maintaining all tools and equipment used during service calls, • Managing and ordering the required replacement parts necessary to complete the outlined service and repairs on customers equipment, • Operate commercial vehicles and equipment to properly diagnose performance and drivability concerns, • Strong customer service skills, • Deadline and detail-oriented, • Ability to thrive in a fast paced environment, • Written and verbal communication skills to understand issues customers have and to explain technical information to customers in clear terms, • Problem-solving skills to diagnose issues with equipment, • Time-management skills to handle appointments efficiently and stay on schedule, • Attention to detail to spot issues before returning unit to work and complete accurate reports about the repairs, • Organizational skills to keep tools and paperwork organized while in the field, • Computer and technical skills to aid in troubleshooting and understand the equipment fully, • Scheduling flexibility for after hours calls, • Previous experience working on heavy equipment, and on highway trucks, • Proper use of PPE and shop tools, • Technical schooling relating to automotive, heavy trucks, and heavy equipment technology, • Familiar with most makes of heavy trucks and/ or equipment, • Experience in troubleshooting electronic controlled diesel engines, and transmissions, • Experience in troubleshooting and repairing mechanically governed diesel engines, • Experience in troubleshooting transmissions and drivetrain complaints relating to noise and/ or vibrations, • Understanding of electrical systems and familiarity with electrical components, • Understanding of hydraulic systems and familiarity with hydraulic componentsCompany DescriptionWe are a mobile truck and equipment repair company based in San Diego. We are currently in the start up phase, established at the beginning of 2022. We are laying the foundation for something bigger. We support a wide range of industries and work on a wide variety of equipment from on highway trucks, off road machinery, and ocean going vessels to engine powered stationary equipment. Aside from our daily outside work we also support our trucking division. We haul material in support of the aggregate business such as dirt for large construction projects and rock for customers who manufacture concrete.We are a mobile truck and equipment repair company based in San Diego. We are currently in the start up phase, established at the beginning of 2022. We are laying the foundation for something bigger. We support a wide range of industries and work on a wide variety of equipment from on highway trucks, off road machinery, and ocean going vessels to engine powered stationary equipment. Aside from our daily outside work we also support our trucking division. We haul material in support of the aggregate business such as dirt for large construction projects and rock for customers who manufacture concrete.

Job DescriptionBenefits: • Competitive salary, • Free uniforms, • Opportunity for advancement Position Overview The Job site Foreman leads daily on-site operations, (hands on, bags on), working with, and overseeing the crew, training new crew, assigning tasks, maintaining quality, safety, and cleanliness, and coordinating with subcontractors. This role requires a solid background in high end residential construction, strong communication, problem-solving skills, and the ability to keep projects on schedule while working closely with the field team, PM's, and clients. Key Responsibilities • Oversee all day-to-day site operations and personnel, • Coordinate with subcontractors onsite and ensure timely execution of work, • Ensure safety protocols, cleanliness standards, and site protection measures, • Conduct daily walk-throughs and quality control checks, • Communicate regularly with the Project Manager to report progress and issues, • Ensure materials and tools are available and used properly, • Read and interpret blueprints and construction documents, • Maintain detailed job site daily logs, and photo documentation, • Resolve on-site conflicts and communicate with Project Management to adapt schedules as needed, • Represent the company professionally to clients, inspectors, and vendorsQualifications, • Minimum 10 years of hands-on residential construction experience, • 2+ years in a leadership or supervisory role preferred, • Deep understanding of construction sequencing, materials, and codes, • Ability to read and interpret plans, specs, and scopes of work, • Strong organizational and time management skills, • Professional communication and problem-solving abilities, • Proficient with smartphones, tablets, and basic construction apps, • Clean driving record and reliable transportationWhat We Offer, • Competitive pay based on experience, • Paid time off and holidays, • Opportunities for growth within a high-performing team, • Collaborative, respectful work culture, • Projects that reflect pride, quality, and design excellence

Job DescriptionDescription: National Firm Looking for a Construction Defect Partner to join our California Team! Kahana Feld is an award-winning national law firm with twelve offices nationally and growing. We are seeking Construction Defect Partners that are looking for an opportunity to: • Become an Equity Partner at a fast-growing national firm that values teamwork, does not require a “book” of business to become an equity partner, and will help you market., • Work with great attorneys at a firm that prides itself on having a supportive culture., • Contribute to a diverse environment fundamentally built on respect for all team members and where mentorship and a positive culture are a priority. We have a unique business model designed to support the success of all our attorneys, from day one! Building a law practice with a great culture is the purpose of the firm. Here are a few of the many things that make KF a great firm! • Excellent benefits (including recently added Paid Parental Leave)., • Flexible PTO., • Leadership positions are open to all attorneys in every office., • Partner level Construction Defect experience, including the ability to run files and manage clients and carrier relationships, • Excellent references and a record of job stability. This organization participates in E-Verify. Equal Opportunity Employer Kahana Feld provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training. Requirements: • Partner level Construction Defect experience, including the ability to run files and manage clients and carrier relationships, • Excellent references and a record of job stability., • Member of the California bar in good standing.

Job Description Construction Superintendent - GG Homes | San Diego, CA Ready to lead transformative real estate projects from the ground up? GG Homes is seeking a hands-on, experienced Construction Superintendent to oversee our construction operations and ensure projects are executed with precision, quality, and efficiency. At GG Homes, we are redefining real estate investment and development in San Diego. Our team drives excellence, innovation, and results, managing impactful projects that shape neighborhoods and communities. Role Overview: As a Construction Superintendent, you will be the on-site leader responsible for directing construction activities, managing crews, ensuring compliance, and maintaining high standards from groundbreaking to project completion. This role is perfect for someone who is decisive, detail-oriented, and thrives in a fast-paced environment, with a talent for problem-solving and team leadership. Compensation: $80,000 Base + Quarterly Bonus for $120k OTE Compensation: $80,000 Base + Quarterly Bonus Responsibilities: • Oversee daily construction operations and ensure projects stay on schedule and within budget., • Lead, manage, and motivate on-site crews, subcontractors, and vendors., • Ensure strict adherence to safety, quality, and regulatory standards., • Collaborate with project managers and stakeholders to coordinate resources, timelines, and project scope., • Conduct regular site inspections to monitor progress, identify risks, and provide actionable solutions., • Maintain accurate project documentation, including reports, schedules, and budgets., • Implement organizational systems for equipment, tools, and materials management., • Serve as the primary on-site point of contact for all project-related issues.Qualifications:, • 3+ years of experience in construction supervision or management., • Proven track record of managing multiple construction projects simultaneously., • Strong leadership skills with the ability to motivate teams and manage subcontractors., • Excellent organizational, communication, and interpersonal skills., • Proficient in reading plans, specifications, and construction documents., • Detail-oriented with strong problem-solving and decision-making capabilities., • Valid driver’s license and ability to pass a background check and drug test. Bonus Points: • Experience in real estate, development, or residential flips., • Familiarity with ADUs, multifamily, or new builds.About Company At GG Homes, we are changing the landscape of the real estate industry by helping homeowners achieve their goals with ease. Our team is dedicated to providing innovative solutions and top-tier service to clients. We pride ourselves on being leaders in the market while fostering a collaborative and supportive work culture. Benefits: • Unlimited PTO, • Competitive Pay, • Medical, Dental, Vision, 401(k), • Homebuyers Program – we’ll help you become a homeowner!, • Real Estate License – we’ll pay to make it happen!

Job DescriptionBenefits: • Company car, • Dental insurance, • Health insurance We are an end-to-end Renewable Energy provider, offering products to commercial and enterprise clients in EV Charging solutions, Fleet Electrification, Solar Micro-grids, Energy storage, Hydroponic farming and Rain Water/Grey Water collection systems. We have been experiencing tremendous growth in all these areas and operate under several government rebate programs that ensure a steady and reliable flow of revenues. Our company handles the entire flow of providing these products and services beginning with Sales, Provisioning, Design and Engineering, Contracting and Construction, Servicing and Maintenance. We are a licensed C-10 contractor and operate construction crews in various areas of CA and soon the rest of the U.S. Overview of Position We are looking for experienced Foremen for several jobs in CA. Job tasks include the following Job Duties & Responsibilities: • Manage a crew of 5 10 workers;, • Read and interpret drawings, blueprints, schematics/ electrical code specifications to determine layout of equipment installations, • Supervise and manage trenching for utility conduits, directing operators on backhoes, backfilling and underground scanning, • Supervise and manage pouring and finishing concrete pads for switchgear, Electrical Chargers, Bollards, directing paving, and overhead EMT conduit placement, • Supervise and manage Electrical resources on the job, • Arrange and coordinate safety meetings;, • Delegate tasks and responsibilities to crew members;, • Be the point of contact with the employers site superintendent;, • Supervise and train apprentices on the job, as required;, • Maintain a safe work environment by adhering to all company guidelines and OSHA safety requirements and also through reporting violations of policies, procedures and guidelines to immediate supervisor;, • Controlling inventory on truck, job-site, and in/out of stock (for active jobs);, • Organize and maintain material lists for your crew;, • Gathering required material;, • Responsible for maintaining company tools;, • Inspect jobs upon completion and ensure areas are clean;, • Work with building principals and supervisors to complete projects;, • Respond to emergency calls as needed;, • Updating work logs, client accounts, and handling other administrative duties., • Communicating with clients in a professional, courteous manner at all times., • Take AHJ inspections and follow up with the utilities.Secondary Functions, • Interpersonal Skills - Focuses on solving conflict, not blaming; maintains confidentiality; listens to others, is proactive in resolving issues., • Written Communication - Write clearly and informatively; conscious of audience and varies writing style accordingly, able to read and interpret written requirements., • Contributes to building a positive team spirit, • Time Management: Prioritizes and plans work activities, uses time efficiently, • Professionalism At all timesWhat we Offer:, • Salaried position, • Up to Two weeks of PTO, • Medical and Dental, • Company Truck with company credit card, • At least two crews with one foreman each, • Room for growthZero Impact Builders is an equal-opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, disability, sex, sexual orientation, gender identity or expression, age, national origin, veteran status, genetic information, union status and/or beliefs, or any other characteristic protected by federal, state, or local law.

Job DescriptionOur client is a Nationwide and Multi-Regional Top Workplace of 2023 and also an Employee-Owned Company! Their foundation is built around construction done right by people who care, in partnership with people we care about! Please note this position is based out of San Diego, CA. As a Superintendent, you will grow your skills, knowledge, and learn best practices from an industry innovator that is also employee-owned! To be successful in this position you will need to be open to learning, disciplined and systems-driven, detail-oriented, comfortable working independently and have a genuine interest in helping team members with a positive and pro-active attitude. Your primary objective is to provide our client with successful projects by assuring the efficient use of materials, labor, equipment, and contractors to complete a project on schedule, within budget, and in accordance with the required quality, and in a manner consistent with appropriate safety standards. Duties • Take responsibility for the onsite construction of assigned projects including:, • Coordinating subcontractors or multi-primes, • Maintaining a positive relationship with Owners, Architects, Consultants, and Contractors, • Managing and supervising self-performed work items, • Processing requests for clarifications, • Updating as-built drawings, • Tracking costs and other items required to properly supervise the construction process, • Developing initial project schedule and update on regular basis throughout the project, • Assuring that progress photos are taken throughout the course of construction, • Assuring that daily reports are accurately and promptly prepared, • Complying with contract documents. Assure that the quality of materials and workmanship complies with applicable specifications and standards, • Reviewing shop drawings and submittals to ensure proper coordination of the work, • Assisting Project Manager in identifying and estimating changes in the work, • Taking the lead in implementing the project and company safety plans, • Working with the Project Manager assigned to the project as required Requirements • Minimum of 5 years of Commercial and Public Works experience preferred, • Excellent attention to detail and facility with numbers, • Ability to prioritize and multi-task, in a busy job site environment, • Ability to resolve issues independently based on project/company standards and verification of facts prior to releasing documents to the client or outside agencies, • Good judgment, logic, and ability to learn new things quickly, • Must have good communication, teamwork, and organizational skills, • Knowledge of Microsoft Office Suite. Procore, and MS Project scheduling software a plus, • A valid driver's license and acceptable driving history are required Benefits • Employee Stock Ownership Plan (ESOP), • Profit-Sharing, • 100% employer-paid Health/Dental premium options for team members, • Generous Vacation and Sick Time off, • Nine(9) Paid Holidays - Including your Birthday!, • 100% employer-paid Life, AD&D, and Long Term Disability insurance, • Retirement plans with company contribution, • Subsidizedtuition on Child Care, • Health/Dependent care FSA's, • Making a difference in the communities you serve Acknowledgments Our client is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to any of the following, whether actual or perceived or based upon identification or association: race, color, religious creed, national origin, ancestry, age, medical condition, pregnancy or childbirth (and related medical conditions), physical or mental disability, genetic information, sex, gender (including gender identity and gender expression), sexual orientation, marital status, registered domestic partner status, military status, veteran status, political activity or affiliation or any other basis protected by law. Employment Type: Full time Location: San Diego, CA

Job Description Summary Our client is a leading custom home builder in San Diego Coastal Communitiesand they are seeking an experienced LeadSuperintendent. This individual will be the on-site face of our client for the homeowner and trade contractors. You will be interpreting plans and specifications, creating schedules, and executing the delivery of the home. You must be able to effectively manage subcontractors and trade partners, always keeping an organized and immaculately clean job site. The responsibilities also include daily project operations such as keeping costs within budget, assisting with bid packages, estimating, and foreseeing long-lead items due to the intricate nature of our client's custom homes. Duties & Responsibilities • Responsible for several simultaneous custom home construction projects., • Serve as primary point-of-contact for the custom home client., • Act as the face of the company., • Manage the clients concerns and needs., • Maintain the project budget and timeline., • Coordinate and manage subcontractors., • Solicit bids and award subcontracts., • Significant experience in residential construction, preferably in custom homes., • Strong interpersonal skills and a customer service focus., • Must be highly organized, responsible and conscientious., • Ability to multitask, handle complexity, and thrive in a very fast-paced environment., • Strong written and verbal communication skills, as well as basic computer skills (Microsoft Excel, etc).What our client is offering, • A competitive base salary plus bonus, • A robust benefits package, including medical, dental, vision, and matching 401k, • Relocation expense packageEmployment Type: Full time Location: San Diego, CA