Trabajos construction worker en Jersey City, New JerseyCrear alertas

Job Description Journeyman HVAC Installer needed for various commercial construction projects near Albany, New York area. Duties will include installing sheet metal ductwork systems throughout the building from Roof Top Units and Air Handler systems. Installing exterior louvers, registers, and diffusers on flexible ductwork. You will not be required to do any unit start ups or braze set lines. You must be able to take direction and work independently. You may be required to work on ladders and possible electric scissor lift up to 20ft. You must have basic hand tools of the trade. You may be required to pass a pre-employment drug test and background check upon arrival. Paying up to $40/hr Per Diem: $150/ a day for days worked Duration: 6 weeks Hours: 40/week Please call Grus Construction Personnel for an immediate interview or reply with resume! Phone: 888..230..9908 Fax: 888..230..9909 Email: registration@@gruspersonnel.com (remove the additional @ symbol) \nCompany Description We believe our mission is two-fold: to staff our client’s projects with the highest quality of skilled tradesmen available and to foster an environment in which the quality of our workers continues to increase. We are dedicated to delivering quality and efficiency in one package. Grus offers our workforce the opportunity for permanent employment and a diversified work experience through our many and varied clients. We believe the service Grus provides offers benefits to both the general contractor and the skilled worker. We believe our mission is two-fold: to staff our client’s projects with the highest quality of skilled tradesmen available and to foster an environment in which the quality of our workers continues to increase. We are dedicated to delivering quality and efficiency in one package. Grus offers our workforce the opportunity for permanent employment and a diversified work experience through our many and varied clients. We believe the service Grus provides offers benefits to both the general contractor and the skilled worker.

Job Description Sheetmetal Fabricators needed for multiple commercial construction projects near Riverdale, New Jersey area. This is primarily shop work, but occasionally there may be a need for you to assist with installation in the field. You will be fabricating various ductwork using a typical plasma machine and will need to be able to operate machine and its computer system. You must bring your own hand tools of the trade and you may be required to pass a pre employment drug and background screening upon arrival. Pay: up to $37/hour Per Diem: None Duration: 9 weeks Hours: 40/week Please call Grus Construction Personnel for an immediate interview or reply with resume! Phone: 888..230..9908 Fax: 888..230..9909 Email: registration@@gruspersonnel.com (remove the additional @ symbol) \nCompany Description We believe our mission is two-fold: to staff our client’s projects with the highest quality of skilled tradesmen available and to foster an environment in which the quality of our workers continues to increase. We are dedicated to delivering quality and efficiency in one package. Grus offers our workforce the opportunity for permanent employment and a diversified work experience through our many and varied clients. We believe the service Grus provides offers benefits to both the general contractor and the skilled worker. We believe our mission is two-fold: to staff our client’s projects with the highest quality of skilled tradesmen available and to foster an environment in which the quality of our workers continues to increase. We are dedicated to delivering quality and efficiency in one package. Grus offers our workforce the opportunity for permanent employment and a diversified work experience through our many and varied clients. We believe the service Grus provides offers benefits to both the general contractor and the skilled worker.

Job Description Construction/Maintenance Worker Job Description:Performs variety of skilled duties in a building trades, such as painting, carpentry, minor electrical, or other recognized crafts for the purpose of maintaining, repairing the building. DUTIES AND RESPONSIBILITIES: • Assists and performs semiskilled tasks of a general nature in connection with maintenance, repair and construction tasks in the upkeep of the Cbuilding, • Assists and performs with installation, maintenance, repair and construction work in the basic building maintenance trades, such as carpentry, painting, electrical, plumbing, locksmith, carpet, and mechanics, • Assists and performs functions in the construction, installation and maintenance of roofs, furniture, fences, cabinets, shelving, marker boards/chalkboards, tack boards and a variety of other structures and items, • Prepares and paints walls and woodwork or performs other types of refinish; installs or repairs carpet; performs custodial duties as required Salary - Biased on experience An Equal Opportunity Employer

Job Description Responsibilities: • Performing a variety of light construction duties such as drywall installation and patching, painting, light bulb and fixture installation, drain and sewer line stoppages, cabinet installation and repair, vinyl and ceramic tile installation and repair and window air conditioner installation and maintenance. Actions will include the use of power tools (hand drills, saws, etc.) and repetitive motions of drilling, sawing, screwing, ratcheting, etc., • Operating basic building systems including boilers and heating systems, fire prevention and alarm systems, etc., • Cleaning all elements of the facility including floors, walls, kitchens, bathroom, common areas, etc. Handling garbage collection and removal. Thoroughly cleaning residential units and all associated elements such as stoves, refrigerators, painting, plastering, etc. in order to prepare them for incoming clients., • Performing a variety of general maintenance tasks such as changing light bulbs,, • changing batteries in smoke and carbon dioxide detectors.Moving, loading, unloading, and transporting furniture, equipment, tools and supplies for use at the facility; Assembling and installing furniture and equipment. • With prior notice, the Maintenance Worker will be assigned to work temporarily at other Safe Horizon locations within the 5 boroughs to provide site coverage., • Learn and integrate a trauma-informed, client-centered approach, using an anti-oppressive lens, into your work with clients., • Cleaning all elements of the facility including floors, walls, kitchens, bathroom, common areas, etc. Handling garbage collection and removal. Thoroughly cleaning residential units and all associated elements such as stoves, refrigerators, painting, plastering, etc. in order to prepare them for incoming clients., • Performing a variety of general maintenance tasks such as changing light bulbs, changing batteries in smoke and carbon dioxide detectors., • Moving, loading, unloading, and transporting furniture, equipment, tools and supplies for use at the facility., • Assembling and installing furniture and equipment. Qualifications: • Certificate or certification in a building trade, maintenance, building systems or building equipment repair., • Ability to lift and move 50lbs on a daily basis., • Valid New York State driver’s license with no suspensions and fewer than 3 points required., • Bilingual English/Spanish preferred, • Experience working in a supportive housing setting preferred,, • Computer proficiencies are desired., • High school diploma or equivalent (or equivalent experience), • Driver's License (Preferred). If hired, I agree to abide by all of Safe Horizon’s rules and regulations, and understand that, if employed, my employment may be terminated with or without cause, and with or without notice, at any time, at the option of either the company or me. I further understand that no representation, whether oral or written by any representative or agent of the organization, at any time, constitutes a contract of employment. AmeriCorps, Peace Corps and other national service alumni are encouraged to apply. Technology Statement: Applicants may be responsible for providing the equipment and tools they need to work remotely as required, such as access to a computer, internet service, and phone service. Safe Horizon will discuss potential solutions with candidates and may assist where needed and agreed to in advance. Please follow this link to view complete EEO Law and complaint filing information: https://www.eeoc.gov/sites/default/files/2023-06/22-088EEOCKnowYourRights6.12ScreenRdr.pdf Know Your Rights: Workplace discrimination is illegal. Hiring Range: $23.08 - $25.38 Hourly Full-time Hours: 35 Hours per week Full-time Benefits: Vacation Time, Paid Sick Time, Holidays, Medical, Dental, Vision, 403(b) Retirement Plan, Company Life Insurance, Medical/Dependent Care Flexible Spending Accounts, Tuition Assistance Program, Commuter Benefits Program, Gym Reimbursement, Parental Leave, Employee Learning Center

Job Description MISSION STATEMENT Are you ready to give back to the community while pursuing your passion? For over 50 years, Acacia Network and its affiliates have been committed to improving the quality-of-life and wellbeing of underserved communities in New York City and beyond. We are one of the leading human services organizations in New York City and the largest Hispanic-led nonprofit in the State, serving over 150,000 individuals every year. Our programs serve individuals at every age and developmental level, from the very young through our daycare programs to mature adults through our older adults centers. Our extensive array of community-based services are fully integrated, bilingual and culturally competent. Salary $18.68 hourly. POSITION OVERVIEW The maintenance worker is responsible for the general maintenance of the facilities which include but are not limited to repairs on heating and air conditioning equipment, hardware repairs, repairing light fixtures, plumbing repairs, moving equipment/furniture, painting and plastering walls, driving company vehicles and general carpentry needs of the facilities. A basic familiarity with the facilities mechanical plant is required. KEY ESSENTIAL FUNCTIONS • Maintain the physical plant and facility in a safe and secure manner., • Assure that the building has adequate heat or air conditioning, light, water and sewage disposal at all times; be on duty during interruptions of any of these to coordinate repairs and emergency contingency plans., • Inspect, diagnose and repair physical plant problems as assigned., • Maintains inventory of all departmental tools; issues and records the distribution and return of all tools used for daily., • Adhere to Fire Safety / Emergency Regulations, Resident Rights and interests, general and special policies and procedures of the Facility., • Perform services as designed at the Facility Manager; maintains grounds and properties owned and/or operated by the organization in compliance with all applicable codes, rules and regulations., • Ensure that all garbage and trash, including hazardous materials, are disposed of properly., • Perform in a wide range of trades including but not limited to maintenance, test, repair, installation and replacement of parts and equipment involving general skills in carpentry, plumbing, masonry, electricity, HVAC, refrigeration, sanitation, grounds, painting, wall covering, cleaning transportation and the preventative maintenance program., • Maintain a clean, neat appearance wearing prescribed uniform at all times., • Cleans all dust, dirt and debris accumulated as a result of maintenance performed, equipment malfunction and resulting repair, construction or renovation., • Accurately completes job logs, records and other work order documentation as required. REQUIREMENTS • High School diploma preferred., • 3-5 yrs Maintenance Worker experience required., • Current Boiler Operator Certificate., • Ability to communicate effectively orally and in writing., • Highly organized, motivated self-starter. Excellent time management skills., • Ability to organize and maintain detailed records; complete necessary paperwork and meet deadlines., • Bilingual – Spanish speaking a plus WHY JOIN US? Acacia Network provides a comprehensive and competitive benefits package to our employees. In addition to a competitive salary, our benefits include medical, dental, and vision coverage. We also offer generous paid time off, including vacation days and paid holidays, to support a healthy work-life balance. We prioritize the well-being of our employees both professionally and personally. As an Equal Opportunity Employer, we encourage individuals from all backgrounds to apply.

Job Description MISSION STATEMENT Are you ready to give back to the community while pursuing your passion? For over 50 years, Acacia Network and its affiliates have been committed to improving the quality-of-life and wellbeing of underserved communities in New York City and beyond. We are one of the leading human services organizations in New York City and the largest Hispanic-led nonprofit in the State, serving over 150,000 individuals every year. Our programs serve individuals at every age and developmental level, from the very young through our daycare programs to mature adults through our older adults centers. Our extensive array of community-based services are fully integrated, bilingual and culturally competent. POSITION OVERVIEW The maintenance worker is responsible for the general maintenance of the facilities which include but are not limited to repairs on heating and air conditioning equipment, hardware repairs, repairing light fixtures, plumbing repairs, moving equipment/furniture, painting and plastering walls, driving company vehicles and general carpentry needs of the facilities. A basic familiarity with the facilities mechanical plant is required. KEY ESSENTIAL FUNCTIONS • Maintain the physical plant and facility in a safe and secure manner., • Assure that the building has adequate heat or air conditioning, light, water and sewage disposal at all times; be on duty during interruptions of any of these to coordinate repairs and emergency contingency plans., • Inspect, diagnose and repair physical plant problems as assigned., • Maintains inventory of all departmental tools; issues and records the distribution and return of all tools used for daily., • Adhere to Fire Safety / Emergency Regulations, Resident Rights and interests, general and special policies and procedures of the Facility., • Perform services as designed at the Facility Manager; maintains grounds and properties owned and/or operated by the organization in compliance with all applicable codes, rules and regulations., • Ensure that all garbage and trash, including hazardous materials, are disposed of properly., • Perform in a wide range of trades including but not limited to maintenance, test, repair, installation and replacement of parts and equipment involving general skills in carpentry, plumbing, masonry, electricity, HVAC, refrigeration, sanitation, grounds, painting, wall covering, cleaning transportation and the preventative maintenance program., • Maintain a clean, neat appearance wearing prescribed uniform at all times., • Cleans all dust, dirt and debris accumulated as a result of maintenance performed, equipment malfunction and resulting repair, construction or renovation., • Accurately completes job logs, records and other work order documentation as required. REQUIREMENTS • High School diploma preferred., • 3-5 yrs Maintenance Worker experience required., • Current Boiler Operator Certificate., • Ability to communicate effectively orally and in writing., • Highly organized, motivated self-starter. Excellent time management skills., • Ability to organize and maintain detailed records; complete necessary paperwork and meet deadlines.

Job Description ? NOW HIRING: FULL-TIME MAINTENANCE WORKER ? Axia Care Center 135 South Center Street, Orange, NJ 07050 We are seeking an experienced, reliable maintenance worker to join our team. Hours: 8:00 AM–4:00 PM, including every other weekend, with a weekday off. Required experience: Painting and plastering walls Installing and repairing baseboards Ceiling repairs and general construction Routine building maintenance and repairs Applicants must have relevant hands-on experience, be authorized to work in the United States, and complete a background check. ? To apply, call Antoinette Atkins at 973-986-8047. Experienced applicants only, please.

Job Description ? IMMEDIATE OPENING: EXPERIENCED MAINTENANCE WORKER — TEMPORARY ? Axia Care Center ? 135 South Center Street, Orange, NJ 07050 Temporary position for approximately five months. Pay: $18 per hour Hours: 30–40 hours per week Shift: 2:00 PM–10:00 PM Schedule: Every other weekend required, with one day off during the week. Benefits: No additional employer-sponsored benefits or other compensation. Legally required benefits will be provided. Required experience: Painting and surface preparation Baseboard installation and repairs Ceiling installation and repairs Plastering and wall repairs General construction and maintenance Prior hands-on experience in these duties is required. Only applicants with relevant experience will be considered for an interview. Must be legally authorized to work in the United States. Employment eligibility will be verified through the Form I-9 process. Employment is subject to a background check conducted in accordance with applicable law. ? Call Antoinette Atkins: 973-986-8047 Axia Care Center is an equal opportunity employer.

Job Description General Summary We are seeking a maintenance worker to assist the superintendent in maintaining the physical integrity of the property. This involves insuring a safe, secure, and comfortable living environment for residents, visitors and staff. The maintenance worker will carry out assigned duties in a safe manner and other duties as requested by the Superintendent. Essential Job Functions/Responsibilities: A building maintenance worker must possess a variety of skills encompassing most of the construction trades, handling that require basic skills as an electrician, carpenter, plumber, mechanic, painter, HVAC technician and roofer, as well as be able to perform all the responsibilities of a porter, should the situation warrant. The building maintenance worker must always remain aware of their limitations and request the services of a professional when the worker’s lack of expertise requires it. Maintenance workers might touch up paint in the lobby, repair a faulty house lock, troubleshoot an open electrical short and replace a faucet, carry an extension ladder, use a 14-pound sledgehammer, all in the same day. • Plumbing: includes the repair, replacement or installation of faucets, pipes, toilets, garbage disposals, dishwashers, water-dispensing refrigerators, and washing machines., • Electrical: includes the troubleshooting, repair, replacement or installation of power switches, fuses, wall sockets, ceiling lights, and ceiling fans., • Drywall/Plaster repair: includes filling in small holes caused by nails and minor dings from normal wear and tear most performed between the time a tenant vacates a unit and a new renter assumes occupancy., • Painting: includes minor touch-ups following damage repair and new coats of paint applied to unit walls between the time a tenant vacates a unit, and a new renter assumes occupancy., • Appliance repair: includes the repair, replacement or installation of major household appliances, such as refrigerators, dishwashers, range ovens, washers and dryers, and air conditioners., • Ground keeping includes mowing grass, pulling weeds, trimming and pruning trees and shrubs, watering lawns and plants, replacing light bulbs along pathways and parking areas, sweeping or raking leaves, and tidying up bark or other ground covering., • Cleaning/housekeeping includes maintaining a tidy appearance in shared community locations, such as the leasing office lobby, clubhouses, and fitness or recreational areas. Also includes cleaning fixtures, floors and other surfaces in vacated units before new renters assume occupancy., • Snow removal: includes shoveling, blowing or plowing snow away from covered walkways and driveways, and laying down rock salt atop icy surfaces to prevent slipping., • Customer service: includes professional, prompt and courteous correspondence with renters when scheduling and providing maintenance services, and with contracted vendors that provide additional facility services., • Time management: includes maintaining an organized scheduling and tracking system, usually on a computer, to effectively complete all maintenance requests in a timely manner and in the order by which they were received or by level of urgency., • Represent the Company in a professional manner as reflected by personal appearance, attention to detail, jobsite cleanliness, customer service and safety., • Document and record all work, purchases, deliveries, accidents, and any other related items in a timely, professional manner., • Respond to emergencies as needed including nights and weekends, being on-call with a cell phone., • Record all inspections and related maintenance on appropriate forms in an accurate and timely manner., • Prioritize all work to minimize vacancy loss, prevent property damage, and provide service to residents., • Inventory Control: Be knowledgeable of inventory levels of spare parts and supplies and inform the Superintendent of shortages., • Mechanical systems: Inspect and maintain boilers, pumps & other mechanical systems. Qualifications and Skills: • Appearance: Neat, clean well-groomed appearance, • Education: High School Graduate or G.E.D. Read, write, & speak English, • Proficient knowledge: Knowledge of carpentry and building maintenance, safe operation of basic hand and power tools, oil burner systems, heating and ventilation systems, electrical systems, appliance maintenance and maintenance, workplace safety and safe lifting and handling procedures, as well as the knowledge of when to contact qualified service personnel., • Skills: An employee in this position must be knowledgeable and skilled in a variety of trades (see above), • Abilities: Applicant must have the physical strength to lift cleaning materials and heavy equipment, physical stamina for being on their feet all day, • Other characteristics such as personal characteristics: Interpersonal skills are necessary for interacting with building occupants and other staff members., • Professional Certification: FDNY certificates of fitness for operating a low-pressure boiler, residential sprinkler systems helpful., • Experience: 3 years’ experience in general building maintenance., • Excellent problem solving and conflict resolution skills., • Experience working with people of different income levels and ethnic backgrounds., • Excellent communication and interpersonal skills Physical Requirements: The building maintenance worker has a physically strenuous and demanding job. He/she will be lifting, pulling and managing heavy equipment and objects. The building maintenance worker will have to work in all weather conditions and must be prepared for both extreme heat and cold. • Have constant need (66% to 100% of the time) to perform the following physical activities:, • Bend/Stoop/Squat/Kneel: Perform routine maintenance/repairs, pick up tools and needed equipment., • Climb Stairs: Service requests, make-ready needs for 2nd and 3rd floor apartments., • Push or Pull: Move equipment, appliances, open and close doors, etc., • Reach Above Shoulder: Perform routine maintenance/repairs, stock and remove equipment, parts, etc., • Climb Ladders: Perform routine maintenance/repairs., • Grasp/Grip/Turning: Handle tools and equipment, perform routine maintenance/repairs., • Finger Dexterity: Handle tools and equipment, perform routine, • Lifting/carrying (supplies, replacement parts, ladders, etc.):, • Over 150 lbs.: Rare need (less than 1% of the time), • 75 – 150 lbs.: Occasional need (1% to 33% of the time), • 25 – 75 lbs.: Frequent need (33% to 66% of the time), • 1 – 25 lbs.: Constant need (66% to 100% of the time) NOTE: Lifting and carrying weights exceeding 50 lbs. is often accomplished with assistance from one or more persons. Examples of the heaviest items lifted include washer/dryers, refrigerators, A/C units, abandoned sofas, etc.

Job DescriptionBenefits/Perks • Prevailing Wage Work for the MTAJob SummaryWe are looking for employees with experience working on commercial roofing projects and standing seam roofing projects. Responsibilities: • Always wear PPE, • Always carry ID, • Follow all safety and quality control instructionsQualifications:, • Past experience as a roofer or construction worker, • Experience with the use of hand-held and power tools, • Experience working with all types of building materials, • Must be able to climb ladders and stairs, comfortably lift 40+ pounds repetitively, and work on your feet for long periods of time, • Ability to work in extreme environments, e.g. hot sun, below freezing, crawl spaces, etc., • OSHA 40, • Scaffold stair tower osha training card, • SST, • NYC Track Training ( We may schedule you if you do not have it)

Job Description Now Hiring: Lead Paint Supervisors and Abatement Workers – Contract Roles (NYC) Are you certified in lead-based paint abatement or inspection? Join our team for ongoing contract-based projects across the five boroughs of NYC. We’re actively seeking qualified professionals for the following roles: 1. Lead Abatement Workers Avg annual: $52,573 (~$25/hr) Range: $34,031–$75,034/year ($16–$36/hr) Responsibilities: Perform lead paint removal and abatement in accordance with NYC DOHMH, EPA, and HUD regulations Use approved methods: wet scraping, HEPA vacuuming, enclosure, encapsulation Set up and maintain containment zones Use and maintain proper PPE Ensure jobsite cleanliness and safety Requirements: Valid EPA Lead Abatement Worker Certification NYC Site Safety Training (SST) Card – 40 Hours Knowledge of Local Law 1 of 2004 and HUD Guidelines OSHA 10 or 30 preferred Ability to lift 50 lbs and work in confined spaces 1. Lead Abatement Supervisors Entry–expert levels: Entry: ~$55k 1–2 yrs: ~$55.4k 2–4 yrs: ~$56.3k 5–8 yrs: ~$57.5k 8+ yrs: ~$59.0k Responsibilities: Supervise field crews and ensure work complies with city, state, and federal regulations Oversee containment setup, air monitoring, and worker safety Maintain project logs, daily reports, and worker sign-ins Communicate with project managers and regulatory agencies Conduct toolbox talks and training on-site Requirements Valid EPA Lead Abatement Supervisor Certification At least 2 years of supervisory experience in lead abatement Strong knowledge of NYC Local Laws, EPA RRP Rule, and HUD requirements SST Card (40 Hours) + OSHA 30 required 1. Lead-Based Paint Inspectors / Risk Assessors Avg: $30.89/hr (~$64,243/year) Range: $13.22–$59.86/hr Responsibilities: Conduct XRF inspections, dust wipe sampling, and visual assessments Prepare reports and risk assessments for residential and commercial properties Provide clearance testing after abatement Follow EPA, HUD, and NYC HPD protocols Requirements: Valid EPA Lead Inspector / Risk Assessor Certification NYC HPD knowledge preferred Experience using XRF analyzers Strong report-writing and communication skills Must carry own insurance or be willing to work under 1099 Job Type: Contract-Based (1099 or Corp-to-Corp) Flexible scheduling Competitive daily rates We Offer: Ongoing projects throughout NYC Weekly pay (on-time, every time) Opportunities for long-term contract work Supportive project management team Apply Now! Email your resume, certifications, and availability Please include your job title in the subject line (e.g., “Lead Worker – Bronx” or “Inspector – Brooklyn”). Equal Opportunity Employer We welcome qualified applicants regardless of race, gender, disability, or background. \nCompany Description Reset Renovation Partners, a 100% Minority Business Enterprise owned and operated in New York City by Andrew W. Douglas, is a comprehensive and full-service Real Estate Development, Construction and Construction Management firm founded in 2020. We are built on a foundation of building stronger communities by renovating and transforming properties into community assets. While our community development mission has always remained consistent, over the years our reach has extended beyond housing to other sectors integral for economic and social success. Reset Renovation Partners is focused on providing development implementation services to real estate, corporate, not-for-profits and institutional clients. Our work encompasses affordable and sustainable housing development, revitalization of disaster-impacted or distressed housing, and the building of community facilities, businesses and infrastructure that enhances and improves quality of life, such as schools, transportation and transit stations, libraries, offices, theaters, community centers and other public purpose/municipal and civic facilities. We are named Reset because we are resetting the standard. Reset Renovation Partners, a 100% Minority Business Enterprise owned and operated in New York City by Andrew W. Douglas, is a comprehensive and full-service Real Estate Development, Construction and Construction Management firm founded in 2020.\r\n\r\nWe are built on a foundation of building stronger communities by renovating and transforming properties into community assets. While our community development mission has always remained consistent, over the years our reach has extended beyond housing to other sectors integral for economic and social success. Reset Renovation Partners is focused on providing development implementation services to real estate, corporate, not-for-profits and institutional clients.\r\n\r\nOur work encompasses affordable and sustainable housing development, revitalization of disaster-impacted or distressed housing, and the building of community facilities, businesses and infrastructure that enhances and improves quality of life, such as schools, transportation and transit stations, libraries, offices, theaters, community centers and other public purpose/municipal and civic facilities.\r\n\r\nWe are named Reset because we are resetting the standard.

Job Description Job Title: Safety Manager Job Description The Safety Manager serves as the designated Site Safety Manager on projects requiring New York City Department of Buildings (NYC DOB) Site Safety oversight. This role develops, implements, and maintains comprehensive Site Safety Plans while leading all project safety activities and field safety personnel. The Safety Manager ensures full compliance with OSHA regulations, NYC DOB Chapter 33 requirements, and client-specific safety programs, and plays a key role in incident prevention, investigation, and continuous improvement. This position offers the opportunity to work on complex, high-profile construction projects and to make a direct impact on worker safety, project performance, and regulatory compliance. Responsibilities • Serve as the designated Site Safety Manager on projects requiring NYC DOB Site Safety oversight., • Develop, implement, and maintain comprehensive Site Safety Plans for assigned projects., • Direct and oversee all project safety activities and field safety personnel, including safety coordinators and site safety staff., • Conduct routine safety audits, inspections, and risk assessments to identify hazards and verify compliance., • Lead incident investigations and perform root cause analyses to prevent recurrence., • Interface directly with owners, construction managers, general contractors, and regulatory agencies to coordinate safety requirements and expectations., • Ensure compliance with OSHA regulations, NYC DOB Chapter 33 requirements, and client-specific safety programs., • Review and approve plans for fall protection, crane operations, excavation, confined space entry, and other high-risk activities., • Monitor corrective actions, verify implementation, and ensure timely resolution of identified hazards., • Prepare, maintain, and organize reports, safety metrics, and compliance documentation for internal and external stakeholders., • Support business development efforts by participating in client meetings, safety presentations, and preconstruction planning sessions., • Drive site-wide safety performance by promoting a strong safety culture, coaching field personnel, and reinforcing best practices., • Manage multiple project sites as needed, ensuring consistent application of safety standards and procedures. Essential Skills • Active NYC DOB Site Safety Manager License., • Demonstrated experience serving as a designated Site Safety Manager on projects requiring NYC DOB oversight., • Strong background in construction safety, including site safety management and safety training., • In-depth knowledge of OSHA safety regulations and NYC DOB Chapter 33 requirements., • Proven ability to develop, implement, and maintain comprehensive Site Safety Plans., • Experience leading all site safety activities and overseeing safety staff on construction projects., • Hands-on experience conducting safety audits, inspections, risk assessments, and incident investigations., • Ability to review and evaluate high-risk work such as crane operations, excavation, confined space activities, and fall protection systems., • Effective communication skills to interface with owners, construction managers, contractors, and regulatory agencies., • Strong organizational skills for managing corrective actions, tracking safety performance, and maintaining documentation., • First Aid and CPR certification., • Experience working on projects exceeding $50M in construction value., • Experience managing safety across multiple project sites simultaneously. Additional Skills & Qualifications • Professional safety credentials such as CHST, CSP, ASP, or equivalent certifications., • Experience working within a specialized construction safety organization or similar environment., • Comfort presenting safety programs and metrics in client meetings and formal presentations., • Ability to build strong partnerships with major owners, developers, contractors, and construction managers., • Interest in long-term career growth in advanced safety management and complex project environments., • Demonstrated ability to influence and promote a proactive safety culture on large construction sites. Work Environment This is an on-site role based at active construction projects. The Safety Manager spends the majority of time in the field, working closely with construction teams, site supervisors, and safety personnel to oversee day-to-day operations. The environment involves large, complex projects with significant coordination among multiple stakeholders and high-risk activities such as crane operations, excavation, confined space work, and work at height. The role requires regular site walks, inspections, and face-to-face interaction with project teams and regulatory representatives. The position offers exposure to advanced safety management practices on high-profile projects and provides opportunities to collaborate with major owners, developers, contractors, and construction managers in a dynamic, fast-paced setting. Job Type & Location This is a Contract to Hire position based out of New York, NY. Pay and Benefits The pay range for this position is $45.00 - $65.00/hr. Individual compensation offered for this position within this range will depend on many factors, including qualifications, skills, relevant experience, job knowledge, geographic location, internal equity, and other pertinent job-related factors. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: Medical, dental & vision Critical Illness, Accident, and Hospital 401(k) Retirement Plan Pre-tax and Roth post-tax contributions available Life Insurance (Voluntary Life & AD&D for the employee and dependents) Short and long-term disability Health Spending Account (HSA) Transportation benefits Employee Assistance Program Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in New York,NY. Application Deadline This position is anticipated to close on Oct 19, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 20,000 consultants and 5,000 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. We are proud to be an Engineering News-Record (ENR) Top 500 Design Firm for our engineering design services and a ClearlyRated Best of Staffing® winner for both client and talent service. The company is an equal opportunity employer and will consider all applications withoutregard to race, sex, age, color, religion, national origin, veteran status, disability,sexual orientation, gender identity, genetic information or any characteristic protectedby law. If you would like to request a reasonable accommodation, such as the modification oradjustment of the job application process or interviewing process due to a disability,please email actalentaccommodation@actalentservices.com for other accommodation options. San Francisco Fair Chance Ordinance:Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in thecity and county of San Francisco, we will consider for employment qualified applicantswith arrest and conviction records. Massachusetts Lie Detector:It is unlawful in Massachusetts to require or administer a lie detector test as acondition of employment or continued employment. An employer who violates this lawshall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI):We may use Artificial Intelligence (AI) to support parts of our hiring process,including sourcing, screening, and evaluating candidates. AI helps assess applicationsand qualifications, but final decisions are made by our hiring team. By applying, youacknowledge and agree that your application may be reviewed using AI tools.

Job DescriptionHIRING: NYC DOB Safety Manager!Job Description We are seeking an experienced Safety Manager to serve as the designated Site Safety Manager on construction projects requiring New York City Department of Buildings (NYC DOB) Site Safety oversight. This individual will be responsible for developing, implementing, and maintaining site-specific safety programs while ensuring compliance with OSHA regulations, NYC DOB Chapter 33 requirements, and client safety standards. The ideal candidate will have extensive construction safety experience, a strong understanding of regulatory requirements, and the ability to lead safety initiatives on large, complex projects. This role offers the opportunity to make a direct impact on worker safety, project success, and overall site compliance. Responsibilities • Serve as the designated NYC DOB Site Safety Manager for assigned projects., • Develop, implement, and maintain comprehensive Site Safety Plans and safety procedures., • Lead and oversee all project safety activities and site safety personnel., • Conduct routine safety audits, inspections, and hazard assessments., • Investigate incidents, perform root cause analyses, and implement corrective actions., • Ensure compliance with OSHA regulations, NYC DOB Chapter 33 requirements, and client-specific safety programs., • Interface with owners, developers, construction managers, contractors, and regulatory agencies regarding project safety matters., • Review and monitor high-risk activities, including:, • Fall protection, • Crane and hoisting operations, • Excavation and trenching, • Confined space entry, • Other critical construction activities, • Track and verify corrective actions to ensure timely resolution of safety concerns., • Maintain safety records, reports, metrics, and compliance documentation., • Support preconstruction planning efforts and participate in client meetings and safety presentations., • Promote a proactive safety culture through coaching, training, and ongoing engagement with field personnel., • Support multiple project sites as needed while maintaining consistent safety standards.Required Qualifications, • Active NYC DOB Site Safety Manager License., • Experience serving as the designated Site Safety Manager on projects requiring NYC DOB oversight., • Strong background in construction safety management., • Thorough knowledge of OSHA standards and NYC DOB Chapter 33 regulations., • Experience developing and managing Site Safety Plans., • Proven ability to lead project safety programs and safety personnel., • Experience conducting audits, inspections, risk assessments, and incident investigations., • Working knowledge of high-risk construction operations, including cranes, excavations, confined spaces, and fall protection., • Strong communication and interpersonal skills with the ability to interact effectively with clients, contractors, and regulatory agencies., • Excellent organizational and documentation skills., • Current First Aid and CPR certification., • Experience working on construction projects valued at $50M+., • Ability to manage safety responsibilities across multiple project sites.Preferred Qualifications, • CHST, ASP, CSP, or other recognized safety certifications., • Experience working for a construction safety consulting or specialized safety organization., • Strong presentation and client-facing communication skills., • Ability to develop and maintain relationships with owners, developers, contractors, and construction managers., • Demonstrated success promoting and maintaining a positive safety culture on large-scale construction projects., • Interest in long-term career growth within construction safety and risk management.Work Environment This position is based on active construction sites and requires a strong field presence. The Safety Manager will spend the majority of their time conducting site inspections, interacting with project teams, and monitoring day-to-day operations. Projects may involve complex construction activities, including crane operations, excavation work, confined space entry, and work at height. The role requires regular interaction with construction personnel, clients, and regulatory representatives in a fast-paced environment. This is an excellent opportunity to work on high-profile construction projects while helping create safer jobsites and ensuring regulatory compliance across all phases of construction. Job Type & Location This is a Contract to Hire position based out of New York, NY. Pay and Benefits The pay range for this position is $45.00 - $65.00/hr. Individual compensation offered for this position within this range will depend on many factors, including qualifications, skills, relevant experience, job knowledge, geographic location, internal equity, and other pertinent job-related factors. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: Medical, dental & vision Critical Illness, Accident, and Hospital 401(k) Retirement Plan Pre-tax and Roth post-tax contributions available Life Insurance (Voluntary Life & AD&D for the employee and dependents) Short and long-term disability Health Spending Account (HSA) Transportation benefits Employee Assistance Program Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in New York,NY. Application Deadline This position is anticipated to close on Oct 16, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 20,000 consultants and 5,000 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. We are proud to be an Engineering News-Record (ENR) Top 500 Design Firm for our engineering design services and a ClearlyRated Best of Staffing® winner for both client and talent service. The company is an equal opportunity employer and will consider all applications withoutregard to race, sex, age, color, religion, national origin, veteran status, disability,sexual orientation, gender identity, genetic information or any characteristic protectedby law. If you would like to request a reasonable accommodation, such as the modification oradjustment of the job application process or interviewing process due to a disability,please email actalentaccommodation@actalentservices.com for other accommodation options. San Francisco Fair Chance Ordinance:Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in thecity and county of San Francisco, we will consider for employment qualified applicantswith arrest and conviction records. Massachusetts Lie Detector:It is unlawful in Massachusetts to require or administer a lie detector test as acondition of employment or continued employment. An employer who violates this lawshall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI):We may use Artificial Intelligence (AI) to support parts of our hiring process,including sourcing, screening, and evaluating candidates. AI helps assess applicationsand qualifications, but final decisions are made by our hiring team. By applying, youacknowledge and agree that your application may be reviewed using AI tools.

Job Description Onsite Construction Compliance Manager Location: Lower East Side, Manhattan, New York Work Arrangement: Onsite Position Type: Full-Time Position Overview MPACT Strategic Consulting is seeking an experienced Construction Compliance Manager to provide onsite compliance oversight for a construction project located on the Lower East Side of Manhattan. This position will serve as the primary onsite compliance representative, working closely with the project team, general contractor, subcontractors, workers, and other stakeholders to support compliance with applicable workforce, labor, and business participation requirements. The ideal candidate is highly organized, comfortable working in an active construction environment, and able to balance field-based monitoring with detailed documentation, reporting, and contractor follow-up. Key Responsibilities • Serve as the primary onsite point of contact for construction compliance matters., • Monitor contractor and subcontractor compliance with applicable project requirements, including M/WBE participation, workforce requirements, prevailing wage and other labor standards, as applicable., • Conduct regular site observations and worker interviews to verify workforce activity and identify potential compliance concerns., • Review certified payrolls, workforce reports, contractor documentation, and other compliance records for completeness and accuracy., • Track subcontractor participation, workforce utilization, hiring commitments, and other required project metrics., • Coordinate with the general contractor and subcontractors to resolve missing documentation, discrepancies, and identified compliance issues., • Participate in project meetings and provide timely updates regarding compliance performance, outstanding items, and areas requiring corrective action., • Maintain secure and organized compliance files and documentation., • Prepare weekly and monthly compliance reports, summaries, and supporting documentation., • Identify potential compliance risks early and work collaboratively with the project team to develop and track corrective actions., • Support contractor education and technical assistance regarding project compliance requirements., • Escalate significant or recurring compliance concerns to project leadership as appropriate. Qualifications • Bachelor’s degree in construction management, business, public administration, compliance, or a related field preferred; relevant experience may substitute for education., • Minimum of 3–5 years of experience in construction compliance, contract compliance, labor compliance, construction administration, or a related field., • Experience working directly with general contractors, subcontractors, construction managers, or public-sector construction projects strongly preferred., • Knowledge of prevailing wage, certified payroll, M/WBE participation, workforce compliance, Section 3, or similar construction-related compliance programs preferred., • Ability to interpret contract requirements and translate them into practical monitoring activities., • Strong documentation, organizational, analytical, and follow-up skills., • Strong written and verbal communication skills, including the ability to communicate effectively with construction personnel at all levels., • Proficiency with Microsoft Excel, Word, and electronic document management/reporting systems., • Experience with compliance platforms such as LCPtracker, Elation Systems, or similar systems is a plus. Position Requirements This is an onsite position on the Lower East Side of Manhattan. The Construction Compliance Manager must be comfortable working in an active construction environment and regularly interacting with contractors, subcontractors, field personnel, and project leadership. The position requires the ability to independently manage multiple compliance priorities, meet reporting deadlines, maintain accurate records, and address issues professionally and collaboratively. Ideal Candidate The successful candidate will be someone who can move comfortably between the construction site and the compliance documentation. They understand that effective compliance is more than reviewing paperwork—it requires being present in the field, building productive relationships with contractors and workers, identifying issues early, and maintaining the documentation necessary to demonstrate compliance throughout the life of the project. MPACT Strategic Consulting LLC is an equal opportunity employer.

Job Description Job Title: Safety Coordinator Job Description The Safety Coordinator plays a critical role in ensuring a safe and compliant work environment across complex construction projects in New York City. This position focuses on conducting daily site safety inspections, implementing project-specific safety plans, and ensuring adherence to NYC Department of Buildings (DOB), OSHA, and client safety requirements. The role offers the opportunity to work on high-profile projects, collaborate with major industry stakeholders, and contribute directly to worker safety, project success, and regulatory compliance within a specialized construction safety organization. Responsibilities • Conduct daily jobsite and site safety inspections to identify hazards and assess risk conditions., • Implement and enforce project-specific Site Safety Plans in alignment with regulatory and client requirements., • Ensure full compliance with NYC DOB requirements, including Chapter 33 regulations, OSHA standards, and client safety programs., • Perform new hire safety orientations and deliver ongoing safety training to site personnel., • Lead toolbox talks and facilitate weekly safety meetings to reinforce safety awareness and best practices., • Investigate incidents, near misses, accidents, and safety violations, and prepare detailed reports documenting findings and recommendations., • Recommend corrective actions to address identified hazards and follow through on mitigation efforts to ensure closure., • Monitor subcontractor compliance with safety regulations, project standards, and site-specific safety programs., • Maintain all required safety documentation, including permits, inspections, logs, and regulatory records., • Coordinate closely with project managers, superintendents, contractors, and regulatory agencies to align safety activities with project goals., • Assist with emergency response planning and implementation, ensuring that procedures are understood and followed on site., • Support advanced safety management practices on high-profile projects and contribute to continuous improvement of safety programs. Essential Skills • Active NYC DOB Licensed Site Safety Coordinator certification., • Demonstrated experience in construction safety management, including daily site inspections and hazard assessments., • Strong knowledge of NYC DOB requirements and Chapter 33 regulations., • Thorough understanding of OSHA standards and construction safety best practices., • Ability to implement and enforce Site Safety Plans on complex construction projects., • Proficiency in conducting toolbox talks, safety orientations, and ongoing safety training sessions., • Experience investigating incidents, near misses, and safety violations and developing corrective action plans., • Capability to monitor subcontractor safety compliance and maintain accurate, organized safety documentation., • Effective collaboration skills to work directly with project managers, superintendents, contractors, and regulatory agencies., • Clear communication skills for leading meetings, delivering training, and preparing detailed safety reports. Additional Skills & Qualifications • CHST (Construction Health and Safety Technician) certification., • First Aid and CPR certification., • Experience with high-rise construction projects., • Experience with healthcare construction environments., • Experience working on infrastructure projects., • Experience with public works construction., • Interest in long-term career growth within a specialized construction safety organization., • Ability to thrive on visible, complex projects and adapt to advanced safety management practices. Work Environment This is an on-site role based at active construction project locations, primarily within New York City. The Safety Coordinator works in dynamic field conditions, regularly moving around job sites to conduct inspections, interact with project teams, and oversee safety activities. The environment involves collaboration with owners, developers, contractors, and construction managers on high-profile projects. Work is performed in and around construction areas, which may include high-rise structures, healthcare facilities, infrastructure works, and public works sites. The role requires a professional presence on site, adherence to all applicable safety procedures, and appropriate use of personal protective equipment as required by project and regulatory standards. Job Type & Location This is a Contract position based out of New York, NY. Pay and Benefits The pay range for this position is $35.00 - $55.00/hr. Individual compensation offered for this position within this range will depend on many factors, including qualifications, skills, relevant experience, job knowledge, geographic location, internal equity, and other pertinent job-related factors. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: Medical, dental & vision Critical Illness, Accident, and Hospital 401(k) Retirement Plan Pre-tax and Roth post-tax contributions available Life Insurance (Voluntary Life & AD&D for the employee and dependents) Short and long-term disability Health Spending Account (HSA) Transportation benefits Employee Assistance Program Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in New York,NY. Application Deadline This position is anticipated to close on Oct 9, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 20,000 consultants and 5,000 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. We are proud to be an Engineering News-Record (ENR) Top 500 Design Firm for our engineering design services and a ClearlyRated Best of Staffing® winner for both client and talent service. The company is an equal opportunity employer and will consider all applications withoutregard to race, sex, age, color, religion, national origin, veteran status, disability,sexual orientation, gender identity, genetic information or any characteristic protectedby law. If you would like to request a reasonable accommodation, such as the modification oradjustment of the job application process or interviewing process due to a disability,please email actalentaccommodation@actalentservices.com for other accommodation options. San Francisco Fair Chance Ordinance:Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in thecity and county of San Francisco, we will consider for employment qualified applicantswith arrest and conviction records. Massachusetts Lie Detector:It is unlawful in Massachusetts to require or administer a lie detector test as acondition of employment or continued employment. An employer who violates this lawshall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI):We may use Artificial Intelligence (AI) to support parts of our hiring process,including sourcing, screening, and evaluating candidates. AI helps assess applicationsand qualifications, but final decisions are made by our hiring team. By applying, youacknowledge and agree that your application may be reviewed using AI tools.

Job Description Michigan Licensed Journeyman Electricians needed for multiple commercial construction projects. You will be installing PVC, EMT, MC Cable, pulling wire, changing out devices, setting fixtures, receptacles, and lighting, and making terminations. You must bring your own hand tools of the trade and you may be required to pass a pre employment drug and background screening upon arrival. Paying up to $50/hr Per Diem: None Duration: 4 weeks Hours: 40 Hours a Week Please call Grus Construction Personnel for an immediate interview or reply with resume! Phone: 888..230..9908 Fax: 888..230..9909 Email: registration@@gruspersonnel.com (remove the additional @ symbol) \nCompany Description We believe our mission is two-fold: to staff our client’s projects with the highest quality of skilled tradesmen available and to foster an environment in which the quality of our workers continues to increase. We are dedicated to delivering quality and efficiency in one package. Grus offers our workforce the opportunity for permanent employment and a diversified work experience through our many and varied clients. We believe the service Grus provides offers benefits to both the general contractor and the skilled worker. We believe our mission is two-fold: to staff our client’s projects with the highest quality of skilled tradesmen available and to foster an environment in which the quality of our workers continues to increase. We are dedicated to delivering quality and efficiency in one package. Grus offers our workforce the opportunity for permanent employment and a diversified work experience through our many and varied clients. We believe the service Grus provides offers benefits to both the general contractor and the skilled worker.

Job Description Sheetmetal Fabricators needed for multiple commercial construction projects near Riverdale, New Jersey area. This is primarily shop work, but occasionally there may be a need for you to assist with installation in the field. You will be fabricating various ductwork using a typical plasma machine and will need to be able to operate machine and its computer system. You must bring your own hand tools of the trade and you may be required to pass a pre employment drug and background screening upon arrival. Pay: up to $37/hour Per Diem: None Duration: 5.5 weeks Hours: 40/week Please call Grus Construction Personnel for an immediate interview or reply with resume! Phone: 888..230..9908 Fax: 888..230..9909 Email: registration@@gruspersonnel.com (remove the additional @ symbol) \nCompany Description We believe our mission is two-fold: to staff our client’s projects with the highest quality of skilled tradesmen available and to foster an environment in which the quality of our workers continues to increase. We are dedicated to delivering quality and efficiency in one package. Grus offers our workforce the opportunity for permanent employment and a diversified work experience through our many and varied clients. We believe the service Grus provides offers benefits to both the general contractor and the skilled worker. We believe our mission is two-fold: to staff our client’s projects with the highest quality of skilled tradesmen available and to foster an environment in which the quality of our workers continues to increase. We are dedicated to delivering quality and efficiency in one package. Grus offers our workforce the opportunity for permanent employment and a diversified work experience through our many and varied clients. We believe the service Grus provides offers benefits to both the general contractor and the skilled worker.

Job Description Minimum Qualifications Education: • Equivalent to completion of twelfth grade; high school diploma or GED., • Ability to read, write, speak, and understand English. Experience: • Five years of experience in general carpentry, plumbing, electrical repair, or other related experience., • Completion of an appropriate two-year technical/trade school course may be substituted for up to 2 years of experience., • Experience must have included supervisory experience. Certifications/Licenses: • Possession of a clean valid NYS, Pennsylvania, New Jersey, or Connecticut Driver's License., • Must meet requirements to maintain a good driving record., • Ability to obtain and maintain appropriate levels of certification from the Fire Department. Work Eligibility: Must be authorized to work in the U.S. Work Location Requirement: Onsite Schedule: 7:30am-4:00pm Monday-Friday Compensation: $70,778.03 annually What We Offer We provide competitive benefits, including: • Comprehensive Health Benefits: Medical (HSA), Dental and Vision plans, • 403(b) Retirement Savings Plan with employer match, • Generous Paid Time Off: Vacation, Personal, Sick, Mental Health Days and 12 paid holidays, • Employee Wellness Programs: Employee Assistance Program and mental health resources, • Learning & Development Opportunities: Educational Leave and Tuition Assistance, Training and Career Development Tracks, • Additional Perks: Commuter Benefits, recognition programs, discount programs, flexible spending plans, voluntary benefits including pet insurance, identity theft insurance, legal plans, and voluntary ancillary benefits. About the Role The Maintenance Supervisor supervises and coordinates the activities of Maintenance Workers and other workers who perform facility maintenance, repair, and construction activities including routine carpentry, painting, plastering, minor electrical work, minor plumbing, and installing or repairing locks. The Maintenance Supervisor also assists with grounds maintenance, transportation of personnel and supplies, documentation, and implementation of facility safety activities under the guidance of the Director, Building Management. Primary Responsibilities • Supervise staff engaged in maintenance and repair projects, including carpentry, plastering, electrical work, plumbing, lock repair, vehicle maintenance, and groundskeeping., • Train, instruct, monitor, and participate in maintenance activities as necessary., • Implement maintenance schedules and conduct regular site visits., • Complete or oversee completion of work orders in a timely and acceptable manner., • Assign staff based on workload and available resources and coordinate emergency project coverage., • Inspect work in progress and completed work to ensure compliance with building codes, regulations, and project specifications., • Inspect work completed by outside contractors as assigned., • Prepare and maintain records of labor, materials, and completed work., • Conduct employee performance evaluations and initiate corrective action when appropriate., • Enforce attendance rules, work standards, and schedules., • Communicate agency policies, directives, and procedures through meetings and written communications., • Provide staff instruction regarding special procedures and assignments., • Participate in recruitment activities and recommend qualified candidates for employment., • Participate in the departmental on-call system and respond to emergencies as assigned., • Assist in regulatory inspections of building systems., • Acquire and maintain appropriate Fire Department certifications and perform required inspections., • Requisition maintenance supplies and oversee receipt, storage, distribution, and safekeeping of materials., • Oversee work request systems and other departmental tracking systems., • Participate in building security-related activities as assigned., • Maintain service and repair agreements., • Assist with identifying and securing outside vendors through the bid process., • Perform all duties and responsibilities of a Facilities Maintenance Worker when necessary., • Perform other duties reasonably related to the position as assigned.

Job Description Job Description Looking for a personable and experienced Site Foreman to lead the team on our projects, while fulfilling one of the skilled trade roles needed on site. You will be the point of contact for both workers and supervisors and you will be a key person for the projects success. You must be well-organized and ensure that safety is an on site priority. Physical requirements are: Stand, walk, or sit for extended periods; Stoop, kneel, or crouch; Talk, hear, see, read and write; Use your hands and fingers to handle, feel or move objects, tools or controls; Use a smartphone; tablet or other device Use first aid equipment, a fire extinguisher and power and hand tools; Lift, move and carry objects up to 75 pounds. Responsibilities Work and report directly to the Project Manager: Coordinate tasks according to priorities and plans; Monitor the attendance of crew; Plan and deligate general and daily responsibilities; Supervise workers and subcontractors; Site safety precautions are met; Resolve problems when they arise; Report on progress to Project Manager You are available and eligible to start full time employment in the U.S. Experience 5+ years experience in high-end home renovation in Brownstones or High-End Co-ops and Condos Prior experience as Site Foreman and / or Carpenter In-depth knowledge of construction procedures, equipment and OSHA guidelines General understanding of electrical and mechanical systems Ability to read drawings and plans Good physical condition and stamina OSHA 30 and / or SST 42 Worker Card / SST 62 Supervisor Card Pay & Benefits Competitive base salary based on experience and skill level Career path opportunities Generous vacation policy, 401K program, transit reimbursement and maternity & paternity leave. \nCompany Description Paid Vacation and Holidays. Paid Vacation and Holidays.

Job DescriptionBenefits: • 401(k), • Dental insurance, • Health insurance, • Paid time off, • Profit sharing, • Vision insurance Client / Engagement: Hudson Tunnel Project Location: New York and New Jersey (On-site) Shift / Schedule: Afternoons/Evenings (Swing Shift) Salary Range: $112,000-197,000 (depending on experience) Employment Type: Full-time Position Summary The Hudson Tunnel Project is the busiest rail connection between New York, New Jersey, and the Northeast Corridor. The project will improve the capacity, reliability, and resiliency of commuter and intercity rail transit serving 800,000 daily passengers between Washington, D.C., New York, and New England. Supported by the bipartisan Infrastructure Investment and Jobs Act (IIJA), the project is slated to receive nearly $12 billion in federal funding — the largest investment in a mass transit project in modern history. Jaquith Consulting Group is seeking an experienced Safety Manager to support the Hudson Tunnel Project. The position is responsible for implementing, monitoring, and managing safety across heavy civil construction operations, and for building a safety culture that goes beyond baseline compliance. Key Responsibilities Rail-Specific & On-Track Safety • Implement and enforce Federal Railroad Administration Roadway Worker Protection requirements (49 CFR Part 214) for all work, including on-track safety programs, job briefings, watchman/lookout and flagging protocols, and workers' good-faith challenge rights. Federal Transit Program Compliance & Certification, • Ensure the project safety program satisfies FTA Capital Investment Grant oversight expectations, including support for the Project Management Oversight Contractor's reviews and the project's Safety and Security Management Plan., • Lead or support the Safety and Security Certification process, maintaining the certifiable items list, verification records, and documentation required by the Gateway Development Commission and FTA., • Apply Safety Management System (SMS) principles consistent with FTA's approach, and produce the safety metrics and reporting the federal funding agreement requires. New York / New Jersey Regulatory Compliance, • Ensure compliance with OSHA construction and underground construction standards, which govern the private contractor workforce on both the New York and New Jersey sides., • Meet site safety requirements, including Site Safety Training (SST) card verification for workers and supervisors, and coordinate with the required site safety roles where applicable. Program Safety Leadership & Strategy, • Develop, implement, and continuously improve the project-wide health and safety management system for tunneling and heavy civil operations., • Set standards for a multibillion-dollar program and lead the development of the safety culture for the program., • Review the DB contractor’s submittals, including safety plans, permits, and other documents, for regulatory compliance, and monitor work activities accordingly., • Work with the safety team to develop and report daily on observations, negative and positive, that impact worksite safety. Risk Management & Operational Planning, • Lead task-based risk assessments and job hazard analyses for high-consequence tunneling activities: soft-ground and mixed-face excavation under the Hudson River, tunnel boring machine (TBM) operations, ground support, ventilation, confined space entry, hoisting, and, where used, compressed-air work., • Design error-tolerant controls., • Identify ways to make safe work easier through innovative procedures, better tools, and alternative materials, and champion those with operations leadership. Incident Management & Learning, • Lead incident, near-miss, and high-potential-event investigations., • Track corrective and preventive actions to closure and feed findings back into risk assessments, procedures, and training., • Respond to, report, and investigate incidents on a regular basis, and ensure the process is followed through to completion. Workforce Engagement & Culture, • Deliver or oversee orientations, toolbox talks, and competency-based training for tunneling, heavy civil, and on-track hazards. Team Leadership & Coordination, • Supervise, mentor, and develop project safety professionals, setting clear expectations and supporting their growth., • Coordinate a single standard of care across the contractor, subcontractors, owner representatives, and the operating railroads., • Maintain regular field presence through inspections and audits, adapting the program as work, personnel, and site conditions change. Emergency Preparedness & Resilience, • Develop and drill emergency response, rescue, and evacuation plans specific to underground and confined-space work., • Coordinate emergency planning. Required Qualifications, • Ten (10) years’ experience implementing, monitoring, and managing safety for heavy civil construction programs/projects., • OSHA 30 certification., • Bachelor's degree in Occupational Safety and Health, Engineering, Construction Management, or a related field; equivalent experience may be considered in lieu of degree., • Experience implementing a Behavior-Based Safety (BBS) program across a diverse workforce., • Working knowledge of OSHA construction and general industry standards (29 CFR 1926 and 29 CFR 1910)., • Experience developing and implementing Accident Prevention Plans (APPs) and Activity Hazard Analyses (AHAs) consistent with federal safety standards such as USACE EM 385-1-1, applicable to federally funded construction projects. Preferred Qualifications, • Tunneling experience., • Experience supporting/supervising safety professionals., • Experience in Federal Transit Agency projects., • Relevant degree in Environmental, Health, and/or Safety Science., • Familiarity with transit agencies (such as PANYNJ, NJT, MTA, LIRR, Amtrak)., • Experience delivering programs or portfolios of significant value (>$1 billion) is a significant advantage., • Certified Safety Professional (CSP)., • Certified Industrial Hygienist (CIH)., • OSHA 500 certification., • Proficiency in project management software and tools., • Board of Certified Safety Professionals (BCSP) credential, such as Construction Health and Safety Technician (CHST), Safety Management Specialist (SMS), or Associate Safety Professional (ASP)., • Training in incident investigation methodology (e.g., TapRooT, Latent Cause Analysis, TOP-SET)., • Active Amtrak Roadway Worker Protection (RWP) / ROW card, or completion of Amtrak safety training., • NYC Department of Buildings 40-Hour Site Safety Manager (SSM) license and current Site Safety Training (SST) Supervisor card, or equivalent New Jersey site safety certification., • Completion of USACE EM 385-1-1 40-hour Safety and Health Requirements training, for experience on federally funded construction sites., • Bilingual (English/Spanish), to support communication with a diverse, multi-shift workforce. Working Conditions Travel • Must be able to travel locally and regionally to multiple project sites to perform field visits and monitor construction work in progress., • This is a swing shift (afternoons/evenings) position requiring regular on-site presence during second-shift construction operations, with schedule flexibility to support 24/7 project activity as needed., • This role involves regular site visits to construction sites or other project locations., • May require working outdoors with exposure to varying weather conditions., • Occasional travel for meetings, trainings, and project outreach events will be required at various locations when necessary. Environment, • Must be able to work from an office setting with frequent fieldwork., • Ability to perform in varying weather conditions as required to conduct site visits during all seasons., • Ability to safely navigate construction sites, with responsibility for adhering to differing site safety, security, and PPE requirements. Physical Requirements, • Ability to walk, stand, and safely navigate construction sites for extended periods., • Capability to lift and carry materials or equipment up to a specified weight limit, if necessary., • Responsible for adhering to all instructions regarding differing site conditions, site security, safety protocols, and PPE requirements. Jaquith Consulting Group is an equal opportunity employer. All qualified applicants will receive consideration without regard to race, color, religion, sex, national origin, disability, age, veteran status, or any other protected characteristic.

Job Description The Assistant Field Supervisor supports the day-to-day field operations, maintenance, cleanliness, safety, and staffing of assigned residential properties. Working under the direction of the Field Supervisor, this position provides hands-on oversight of porter and maintenance activities, assists with staff coordination and quality-control inspections, and performs general building maintenance and repairs as needed. The role serves as a working field leader and helps ensure properties are maintained in a safe, clean, professional, and first-class manner consistent with company standards. The Assistant Field Supervisor will conduct all business in accordance with company policies and procedures and applicable NYC, state, and federal laws and regulations, including OSHA, ADA, and Fair Housing requirements. The ideal candidate combines practical building-maintenance experience with strong leadership, communication, organization, and problem-solving skills. The Assistant Field Supervisor must be able to move between assigned sites, respond to changing operational priorities, support staff in the field, and communicate effectively with residents, management, vendors, contractors, and inspectors. Essential Duties and Responsibilities • Assist the Field Supervisor with the daily oversight, direction, and coordination of porter and maintenance staff across assigned properties and shifts., • Conduct regular site visits and inspections to verify cleanliness, maintenance quality, safety, staff coverage, and compliance with company and building standards., • Provide hands-on support to porter and maintenance staff when needed to maintain service levels, complete assignments, and address urgent building needs., • Assist with training, coaching, retraining, and mentoring employees regarding work quality, safety, appearance, professionalism, customer service, and company procedures., • Help monitor daily staffing coverage, assignments, schedules, attendance, and operational priorities; promptly report coverage or performance concerns to the supervisor., • Perform general repairs, preventative maintenance, and routine building inspections., • Respond promptly and professionally to resident maintenance requests and work orders/service tickets., • Troubleshoot and complete basic repairs involving plumbing, electrical, HVAC, appliances, carpentry, painting, plastering, doors, locks, cabinets, fixtures, walls, ceilings, flooring, and general hardware., • Assist with apartment turnovers and make-ready work, including repairs, painting, cleaning, and general improvements., • Monitor the condition of common areas, apartments, grounds, building systems, equipment, tools, and maintenance spaces and report deficiencies or major repair needs., • Assist with grounds maintenance, trash collection, snow removal, seasonal work, and other property-maintenance duties as operationally required., • Perform quality-assurance checks and report progress, deficiencies, safety concerns, code issues, equipment failures, and unresolved work to management., • Assist management with compliance inspections and regulatory requirements, including HPD, DOB, FDNY, DEP, OSHA, Local Law requirements, housing quality standards, and other applicable requirements., • Coordinate and communicate with property management, building staff, contractors, outside vendors, residents, and inspectors regarding access, repairs, shutdowns, scheduling, and building conditions., • Maintain accurate records of inspections, completed work, preventative maintenance, service requests, work in progress, apartment make-ready status, incidents, and other required operational information., • Assist with documenting employee coaching, incidents, performance concerns, and other field matters for review by the supervisor or management., • Ensure staff follow company policies, building procedures, safety requirements, operational protocols, and applicable union rules., • Follow all workplace safety procedures and OSHA requirements; properly use PPE and immediately report workplace injuries, hazardous conditions, and safety incidents., • Provide courteous, professional, and respectful service to residents, visitors, vendors, inspectors, coworkers, and clients., • Assist with building emergencies and after-hours operational or maintenance issues, including evenings, weekends, and holidays as needed., • Assist with setting porter schedules and daily assignments, including timely garbage collection, building readiness, and coverage needs across assigned locations., • Assist with scheduling, assigning, monitoring, and tracking maintenance requests and work orders in RealPage; follow up on outstanding items and escalate unresolved or recurring issues to the Field Supervisor or management., • Support oversight and coordination of mold abatement, remediation, and related repairs, including follow-up to confirm required work has been completed., • Monitor construction, contractor, and vendor activity at assigned properties to ensure compliance with site and safety protocols, including keeping hallways, basements, exits, and common areas clear and safe., • Be present for tenant evictions and other property-related proceedings when required by management and in accordance with company procedures., • Work with the Inventory Manager and maintenance team to monitor supply levels and help maintain adequate materials for routine maintenance, emergency repairs, unit turns, and compliance-related work., • Assist with staff assignments and repair coordination for HQS, Section 8, HPD, and other regulatory inspection or compliance-related tasks., • Conduct daily walkthroughs of assigned properties to identify and address cleanliness, maintenance, safety, security, and building-readiness concerns., • Maintain effective and professional communication with residents, vendors, contractors, city agencies, inspectors, Property Management, and community stakeholders regarding assigned operational matters., • Promptly identify, document, and report significant safety hazards, building conditions, potential violations, staffing concerns, and other operational risks to the Lead Supervisor or management., • Perform other job-related duties and responsibilities as assigned by management.Minimum Qualifications, • High school diploma or GED required., • Minimum of three (3) years of residential building maintenance, superintendent, facilities, handyman, or related experience preferred., • Prior lead, supervisory, or team-coordination experience preferred., • Working knowledge of plumbing, electrical, carpentry, painting, plastering, boiler/heating systems, HVAC, appliances, and general building maintenance., • Strong leadership, customer service, conflict-resolution, communication, organizational, and problem-solving skills., • Ability to read and interpret procedures, work instructions, manuals, work orders, and inspection requirements and to prepare routine reports and incident documentation., • Ability to work independently with minimal supervision while also working effectively as part of a team., • Ability to multi-task, prioritize assignments, and respond effectively in high-pressure or emergency situations., • Ability to use email, mobile devices, scheduling systems, work-order management systems, and basic computer applications., • Ability to communicate effectively and professionally in English; bilingual skills are a plus., • Valid job-related certifications are a plus., • Able to write required reports., • Able to work 40 hours; weekly schedule may change as required., • Flexible schedule required, including weekends, holidays, emergency coverage, and travel between assigned properties as operationally required. Physical Demands and Work Environment • Able to operate equipment, machinery and tools (wrenches, hammer, broom, snips, hand trucks, step ladders, blowers, shovels, etc…), • Constantly required to be on feet/standing, • Regularly required to communicate with staff, visitors and residents., • Frequently is required to use hands or fingers, handle or feel objects, tools, or controls., • Frequently required to walk; sit; balance; crouch; push and pull objects; bend; and reach with hands and arms. Climb ladders and stairs., • Must be able to regularly lift and/or move up to 75 pounds; and occasionally lift/carry up to 100 pound (heavier lifts will normally be made with the assistance of a co-worker)., • Close vision, distance vision, and the ability to adjust focus., • Work environment includes climatic exposure to heat and cold (outside work), noise, vibration, heights, enclosed spaces, cleaning agents, dust and other household irritants. Note This job description in no way states or implies that these are the only duties to be performed by the employee(s) incumbent in this position. Employees will be required to follow any other job-related instructions and to perform any other job-related duties requested by any person authorized to give instructions or assignments. All duties and responsibilities are essential functions and requirements and are subject to possible modification to reasonably accommodate individuals with disabilities. To perform this job successfully, the employee will possess the skills, aptitudes, and abilities to perform each duty proficiently. Some requirements may exclude individuals who pose a direct threat or significant risk to the health or safety of themselves or others. The requirements listed in this document are the minimum levels of knowledge, skills, or abilities. This document does not create an employment contract, implied or otherwise, other than an “at will” relationship.

Job DescriptionFinal compensation will be based on a combination of: · Relevant work experience · Education · Project size · Project location · Required working hours · Candidate subject matter expertise and/or specialty · Ability to be approved by agencies/owners as required · Final salary determination is negotiable Join our "track" record of success, we are looking to grow our most valuable asset … our employees! J-Track is known for its close-knit, loyal, and dedicated staff who share one mission: completing projects on-time and under budget all while fostering an environment of growth and success. Not only is J-Track the best track and transit system contractor in New York, but we also strive to maintain our reputation as a formidable force in the heavy civil construction market. We have successfully performed railroad track work, civil construction, and architectural work for a number of governments agencies engaged in public transportation. Looking to engineer a new career path? Join the J-Track family and help us lay the foundation for the future! The Quality Manager is responsible for leading the quality control program to ensure that the project is planned, procured, documented and installed to meet the owner and company quality requirements. The QM has a full understanding of these requirements and works in the office and field - with the supervisory, craft, supplier and subcontractor employees to ensure full compliance is documented. As the main quality representative on the project site, the QM ensures that all activities are planned with quality in mind and performed to these same standards. This includes working with and providing support to the project team throughout the entire process of planning, scheduling and implementing the full scope of the project. II. EDUCATION/CERTIFICATIONS • OSHA-30 Certification, • BS in Engineering, Construction Management or related field or equivalent years' experience., • Certified Quality Engineer (CQE) as recognized by the American Society for Quality (ASQ) or a certified ISO-9000 Lead Auditor as recognized by the Registrar Accreditation Board (RAB) preferred. III. KEY RESPONSIBILITIES • Develop the Contractor's Quality Program (CQP), • Write Quality Work Plans (QWP) for each work activity as required, • Establish and maintain a Submittal Management Log to identify and track all required submittals, • Review submittals for compliance with contract requirements before they are transmitted, • Review returned submittals for their review status and comments…, • Ensure that revised submittals correctly address any review comments, • File and Distribute the submittals when approved, • Establish Document Control procedure to ensure all documents are current and readily available, • Ensure that materials and equipment delivered to the job site are as per approved submittals and are properly documented, handled and stored, • Ensure that all Subcontractors and Suppliers have Quality Programs appropriate to the work, • Perform external audits on Subcontractors and Suppliers on major items, • Schedule, document and participate in Off-Site Inspections and Testing, • Schedule, document and participate in all Special Inspections - Concrete, Welding, Bolting, etc, • Provide Hold Point and Inspection requirements for the Look Ahead Schedule, • Maintain records to ensure that the equipment is calibrated, • Maintain records to ensure that all worker certifications are updated, • Provide training as required for the Quality Staff and Management Teams, • Write Non-Conforming Reports (NCR) for work that is not in compliance, • Prepare corrective actions to address any NCR's, • Prepare and submit Daily Quality Reports for the QC activities performed IV. QUALIFICATIONS OF THE POSITION • 7+ years of Heavy Civil Construction experience., • Involvement on MTA projects including prior Quality Manager approval., • Member of the American Society for Quality preferred., • Strong oral and written communication., • Excellent time management skills., • Proficient in Microsoft Office Suite., • Familiarity with terms and conditions of Project Contracts, Subcontracts, and Purchase Orders. #ZR Salary Range: $130,000—$180,000 USD \nCompany Description Iovino Enterprises is the parent company to four New York City based construction companies that share a common commitment to excellence, innovation, and exceptional results. Unlock your potential and seize the opportunity to be at the forefront of a construction empire. As a product of 35 years in the construction business, we have harnessed expertise in cutting-edge technology, human capital management, finance, and legal/compliance, all while fostering an environment where each company retains its distinct personality and style. This “family of companies” culture is rooted in a common vision and set of values: respect, development for all employees regardless of position, and a commitment to give back to our communities. Iovino Enterprises is the parent company to four New York City based construction companies that share a common commitment to excellence, innovation, and exceptional results. Unlock your potential and seize the opportunity to be at the forefront of a construction empire.\r\n\r\nAs a product of 35 years in the construction business, we have harnessed expertise in cutting-edge technology, human capital management, finance, and legal/compliance, all while fostering an environment where each company retains its distinct personality and style. This “family of companies” culture is rooted in a common vision and set of values: respect, development for all employees regardless of position, and a commitment to give back to our communities.

Job Description C.A.C. Industries is a successful and growing heavy/civil construction contractor in NYC and surrounding areas. CAC employees are driven by four Core Values: It’s Always We, Be Green & Lean, Educate to Transform, and Be Humble & Kick Ass. These Core Values help us achieve our Core Purpose of Creating Unlimited Opportunities. Our company culture has led us to being listed on Crain's Best Places to Work in NYC for the last five years. We are currently seeking a full-time Safety Coordinator to join our team. The ideal candidate would be highly detail-oriented, proactive, and committed to continuous learning. This role is well suited for someone with practical knowledge and/or relevant experience in construction safety while supporting both the administrative and field operations of our Safety team. The position will be primarily based in our Greenpoint, Brooklyn office, with regular visits to NYC job sites as needed. The ideal candidate should be comfortable working in both office and field environments. Qualifications: • Bachelor’s degree preferred in Occupational Safety & Health or equivalent combinations of education, training and related experience., • 1-2+ years of Construction Safety experience, preferably Heavy Civil and Utility., • Working knowledge of OSHA construction standards., • Familiarity with Job Hazard and Job Safety Analyses., • Strong proficiency in Microsoft Excel, including a proven ability to organize, manipulate, and manage large, complex data sets and spreadsheets., • Proficiency in Microsoft Word and PowerPoint., • Strong attention to detail and highly organized in a fast-paced environment., • Excellent verbal and written communication skills., • Ability to work independently and collaboratively to accomplish goals., • Ability to manage multiple priorities at a time., • Strong interpersonal skills, and able to communicate effectively with field crews and project staff. Certifications: • OSHA 30-hour Construction Safety certification preferred. Major Responsibilities: • Support the administrative maintenance of project and corporate safety records, including inspections, safety forms, certifications, trainings, and reports., • Track worker certifications, trainings, and credentials., • Review Job Hazard Analyses with input from project teams., • Help schedule safety trainings and record attendance., • Assist with data entry, document preparation, filing, and recordkeeping., • Visit job sites periodically to assess compliance with company safety protocols through safety observations and inspections., • Assist the Safety staff and project teams to follow up on corrective actions. What We Offer: • Employee Stock Ownership Plan, • Medical, Dental and Vision Insurance (with 95% of insurance premiums paid by the company), • 401k Retirement Plan with Company Match, • Employee Assistance Program, • Career Development through Mentoring Program, Learning & Development, Continuing Education The above description is intended to provide a general overview of the responsibilities and requirements associated with the Safety Coordinator position. The job responsibilities may evolve and change over time to align with the needs of the projects and the organization. C.A.C. Industries, Inc. is an equal opportunity employer that does not discriminate on the basis of actual or perceived race, creed, color, religion, national origin, ancestry, alienage or citizenship status, age, disability or handicap, sex, gender identity, marital status, familial status, veteran status, sexual orientation or any other characteristic protected by applicable federal, state or local laws.

Job DescriptionDescriptionArtheon is a trusted engineering and consulting firm offering services that rival large organizations while maintaining the personalized client relationships of a boutique firm. With expertise spanning civil/site engineering, environmental permitting, transportation infrastructure, construction management, and advanced surveying technologies, we are committed to delivering high-quality, timely solutions to local, state, and federal clients. We are seeking an experienced Coating Inspector to support major rail, bridge, and transportation infrastructure projects. The Coating Inspector will be responsible for monitoring and documenting surface preparation, coating application, and quality control activities to ensure work complies with project specifications, approved coating systems, manufacturer requirements, and applicable industry standards. The ideal candidate will have hands-on experience inspecting structural steel coatings on bridges, rail infrastructure, stations, transit facilities, or other heavy civil structures. This position requires strong technical knowledge of coating systems, surface preparation, environmental conditions, inspection procedures, and documentation. The Coating Inspector will work closely with contractors, construction managers, engineers, project managers, and agency representatives to identify deficiencies, verify corrective actions, and ensure coating work meets the requirements of the contract. This position will support various rail/bridge projects throughout Nassau and Suffolk Counties with a daily schedule of Monday through Friday 7:00am to 3:30pm. Must be open to night and weekend work as needed. Duration of position is expected to be 24 months. Responsibilities • Verify the completion of surface preparation and painting on the project site., • Verify contractor monthly submittals including certified payrolls, Disadvantaged Business Enterprise (DBE), Minority Business Enterprise (MBE), and Women-Owner Business Enterprise (WBE) updates, schedules, requisitions for payment, work plans and shop drawings accuracy and completeness., • Interface with Senior Field Inspectors(s) to review the third-party contractor and consultant invoices for payment in accordance with progress of work., • Physically navigate around sites including, but not limited to, inclined embankments, train tracks and ballast, lifted work platforms, etc., • Visit alternate sites quickly and provide updates to MTA personnel immediately in urgent circumstances., • Ensure work is performed in a safe productive manner., • Document work performed, prepare daily inspectors report Manual for Uniform Record Keeping Format., • Notify appropriate MTA personnel of any event or problems requiring immediate attention., • Ensure work is executed in accordance with LIRR procedures and guidelines for design and construction., • Comply with Safety and Quality Plan requirements within the third-party contract., • Utilize the electronic filling system, Project Management Information System, per LIRR policy., • Attend an MTA Roadway Worker Protection training class which will be provided by the MTA and maintain certification during the duration of the Task Order., • Coordinate LIRR flag protection for third-party contractor., • Assist with planning and coordinating track outages and foul time as required for construction activities., • Read and interpret contract specifications and construction plans including Containment and Maintenance and Protection of Traffic (MPT) Drawings. Qualifications • Minimum of three (3) years of relevant experience in Bridge Painting, Construction and Inspection. Experience working on MTA, LIRR, and MNR projects is preferred., • Valid Association for Material Protection and Performance (AMPP) Coatings Inspector (CIP Level I Certification) or Bridge Coating Inspector Level 1 (BCI I Certification). Certifications must remain valid and maintained for the duration of the task order., • Valid OSHA 30 Certification completed within the past five (5) years., • Three (3) years experience:, • Verifying the completion of construction work., • Performing visual and physical inspections of surface cleaning and preparation, and coding system inspection for installation as defined by AMPP requirements., • Interpreting contract specifications and construction plans including Containment and MPT Drawings., • Strong written and verbal communication skills., • Experience with Microsoft Office suite of products (Teams, Word, Excel)., • A valid driver's license BenefitsThe base salary range for this role is indicated in the posting. This range reflects the company’s good faith estimate of the compensation for this position at the time of posting. Final compensation will be determined based on factors such as experience, skills, qualifications, internal equity, and geographic location. Artheon offers a competitive compensation package including medical, prescription, dental and vision coverage, 401(k) retirement plan with employer match, educational assistance program and paid time off/parental leave.

Job Description $145,600-$163,800/year estimated earnings* Heartfelt Builders is a NYC developer and general contractor hiring a full-time, W-2 NYC DOB Licensed Site Safety Manager for our active construction sites in Queens. Expected schedule: 60 hours per week. Brooklyn office; Queens sites. *Estimated annual gross pay based on $40-$45/hour and 60 paid hours every week for 52 weeks: 40 regular hours plus 20 overtime hours at 1.5x. Actual earnings depend on hours worked. Overtime is paid after 40 hours in a workweek. Responsibilities: Serve as the designated SSM on one assigned site at a time; conduct daily safety inspections and maintain safety logs; enforce NYC Building Code Chapter 33 and OSHA rules; handle DOB inspections, violations and stop-work issues; run toolbox talks and worker orientations; coordinate with the superintendent and operations team. Reassignment to other active NYC sites may be required as workload permits. Requirements: Active NYC DOB Site Safety Manager license in good standing; current SST Supervisor card and OSHA 30 Construction; at least 3 years of NYC construction-site safety experience on major-building projects with approved Site Safety Plans; U.S. work authorization; and availability for the stated 60-hour schedule. An SSC license or training certificate alone does not meet the SSM requirement. Preferred: At least 2 years serving as the designated licensed SSM; new-building, concrete or demolition experience; DOB NOW experience. Apply through ZipRecruiter with your resume, DOB SSM license number and expiration date, NYC project history, and earliest available start date. Heartfelt Builders is an equal opportunity employer.

Job Description Gallagher Bassett Technical Services, Inc. an AJ Gallagher company, is seeking an Onsite Safety Professional on a Construction Site. We are a highly energetic company and offer competitive benefits. The candidate should have a team player attitude, be a highly motivated individual, and have attention to detail. Work as an Onsite Safety Professional on Construction Sites in the NYC Metropolitan and or Tarrytown NY area Job Summary We are looking for a passionate and proactive safety professional to ensure that safety and health procedures are followed on the construction project. The individual must possess prior experience in steel erection. Job Duties The Safety Professional to act as the on-site Safety Consultant to assist in improving safety performance on the construction and/or demolition project. The Safety Professional’s activities may include the following: • Collect and maintain copies of Subcontractor Safety Programs in the jobsite field office., • Perform new worker safety orientations that are intended to provide general hazard recognition about conditions specific to the site and maintain a written record of orientations in the safety file. If approved by the Client, a Hardhat sticker program will be implemented. Verify and document the onsite subcontractor safety representatives/competent persons. • The Safety Professional will coordinate regular Project Safety Meetings, maintaining minutes or some other record. These may be a segment of the regularly scheduled coordination meetings or a separate meeting specifically for safety., • The Safety Professional will collect weekly toolbox talk meeting minutes from Subcontractor Safety Representatives/Competent Persons., • The Safety Professional shall inspect, on a regular basis, areas and items throughout the jobsite in an attempt to determine that the conditions at the site meet the requirements of Federal, State and Local Standards, and the Loss Control Program implemented for the project. Inspections shall not include technical inspections relating to any aspect of design, structural integrity or the means and method of work. The Safety Professional shall maintain a written log of inspections. If unsafe acts or conditions are observed the Safety Professional shall note these observations in the daily log, note the subcontractor that any recommendation for correction was made to, and indicate the date that the item was corrected by the person or company notified., • If necessary, comprehensive accident investigations will be conducted by the Safety Professional; investigation can include interviews, photographs and written reporting., • The Safety Professional shall coordinate loss control inspections with insurance broker, carrier representatives and accompany any regulatory official on safety inspections., • The Safety Professional must be on the job while work is in progress and must be available to work at times that coincide with the normal working hours of the job, including overtime, shift, nights, weekend and/or holiday work. Requirements Must possess prior experience in steel erection. • Minimum of five years of experience working in/with the construction field, • 62 hour supervisor SST card, • 40 hour site safety manager course, • 32 supported scaffold, • 32 suspended scaffold, • S56 CSFSM certificate, • English/Spanish speaking a plus Powered by JazzHR ZEykMWwpCg

Job Description Matrix New World Engineering, a part of True Environmental and its partner firms, have united their strengths to establish the nation's premier environmental and engineering services consulting firm. This powerhouse organization offers an extensive range of services aimed at revolutionizing the built environment and preserving the natural one. Its diverse expertise encompasses environmental remediation, urban planning, engineering iconic coastal and marine structures, developing sustainable energy sources, and pioneering resource extraction methods. Explore further at www.MWNE.com and True-Environmental.com to discover the full scope of our capabilities. We are currently seeking an Engineer Diver for our growing Marine and Coastal engineering practice in our Florham Park and NYC offices. The successful candidate will support the growth of our Marine Asset Management service line by supporting field inspections, developing inspection reports, generating rehabilitation construction documents, and providing waterfront construction oversight in the NYC metropolitan area. The ideal candidate for this position is an enthusiastic, self-motivated individual who has between 0 and 5 years of inspection and design experience. Successful candidates enjoy working in a team environment through challenging projects. Strong communication skills, both written and verbal, are critical. What You'll Do • Perform waterfront (above and underwater) inspections of marine and coastal infrastructure; including piers, wharves, bulkheads, seawalls, and revetments, • Collect field data as required to document and communicate existing conditions using measurements, sketches, destructive and non-destructive testing equipment, point cloud models, and emerging technologies, • Develop detailed inspection reports to communicate the results of field investigation efforts, tailored to the individual requirements of the client. A focus on leveraging emerging technologies to identify opportunities to maximize efficiencies., • Support the development of rehabilitation and new construction design documents., • Support the development of design calculations as required to support inspection and rehabilitation projects including load ratings, service life analysis, and rehabilitation detail design., • Assist with dive operations including dive safety planning, equipment maintenance, inspection record tracking, and planning training events., • Support the mobilization and demobilization of diving equipment small boat operations and mobilization/demobilization of dive and survey equipment, • Coordinate with clients, contractors, and regulatory agencies in the fieldRequired Qualifications, • 0–5 years of relevant professional experience, • ADCI Entry Level Tender/Diver Certification, • Bachelor's degree in engineering (civil, structural, ocean, coastal, or related discipline) from an ABET-accredited program, • Engineer in Training (EIT) certificate (or Engineer Intern as applicable), • Current commercial dive physical meeting ADCI Consensus Standards requirements, • Current safety certifications including:, • OSHA 10, • First Aid, CPR, and AED,, • O2 Provider, • Bloodborne Pathogens, • Valid Transportation Worker Identification Card (TWIC), or ability to obtain prior to employment., • Valid driver's license and acceptable driving record., • Ability and willingness to travel and work outdoors in variable weather, tidal, and current conditions., • Ability and willingness to support overnight travel and non-standard hours., • Strong quantitative/math and analytical skills, • Core competency in Microsoft Office Products, including Word, Excel, PowerPoint, Teams, and Outlook, • Excellent written and verbal communication skills with a strong attention to detail, • Ability to pass pre-employment and periodic drug and alcohol screening.Preferred Qualfications, • ADCI Air Diver certification, • Master’s degree in engineering (civil, structural, ocean, coastal, or related discipline) from an ABET-accredited program, • Professional Engineering (PE) license in New York and/or New Jersey., • Documented experience performing waterfront inspections per ASCE MOP 130, NYCEDC Waterfront Inspection Manual, and/or PANYNJ., • Experience working with underwater non-destructive testing equipment., • Point Cloud Modelling and/or Hydrographic survey experience., • Working knowledge of AutoCAD, Civil 3D, Revit, or GIS (ArcGIS Pro), • Structural analysis software experience (e.g., RISA, SAP2000, STAAD), • Asset management experience including the development and/or management of asset databases, • Current safety certifications including:, • OSHA 30, • HAZWOPER 40-hour, • Boat operator certification and/or U.S. Coast Guard Auxiliary’s Boating Skills and Seamanship (BS&S)Physical Requirements This position requires operating as a commercial diver and tender during commercial diving operations in an industrial environment. This requires, but is not limited to having the ability to load and unload commercial diving equipment from vessels and trucks; don and dof commercial diving equipment; enter and exit the water in commercial diving equipment via ladders, fulfill the requirements of a standby diver; and operate in low temperature, low visibility, and high current underwater environments. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Highway Maintenance WorkerIndividuals selected must be able to respond to emergency callout within 1 hour during inclement weather, including all snow and ice conditions, to be considered for this position.Duties include but are not limited to:Perform routine manual tasks requiring medium to heavy physical effort involving exposure to all kinds of weather conditions.Operate plows during winter operations and obtain the equipment certifications listed below.Serve a role within the Incident Command System to support the department's response to regional and statewide emergency situations.Minimum Qualifications:Highway Maintenance Worker Trainee 1:Must be 18 years old, pass physical/medical examination and drug test, and possess a Class D Driver License.Highway Maintenance Worker Trainee 2:Must be 18 years old, pass physical/medical examination and drug test; and possess a Class A or B Commercial Driver License with no airbrake restriction. Candidates will be evaluated on their ability to satisfactorily operate a NYSDOT large dump truck within two weeks of appointment. Failure to pass will result in termination.Highway Maintenance Worker 1:Satisfactory completion of the Highway Maintenance Worker Traineeship 2 or one year of experience in the operation of highway construction, maintenance equipment, or other vehicles in excess of 26,000 Gross Vehicle Weight Rating with air brakes and possession of a Class A or B Commercial Driver License with DOT-specified endorsements, and two NYSDOT equipment operation certifications, in addition to the following three specific certifications: heavy dump truck, one person plowing with single or double wing, and front-end loader.Within the first two weeks of employment, applicant must satisfactorily complete NYSDOT Heavy Dump Certification or their employment will be terminated.All candidates must pass a pre-employment physical/medical examination and drug test prior to beginning employment.Cannabis use is not permitted for employees in this title and assignment. Cannabis use will be tested for during the pre-employment screening process and may be the basis for disqualification for employment or may be a basis for removal from employment.Candidates who meet both of the following MAY be eligible to bypass the pre-employment physical: A valid CDL A or B AND a current (less than 2 years old) CDL Medical Certificate (form MCSA 5876) that meets specific criteria which will be discussed at the time of interview.Applicants must be currently authorized to work in the United States on a full-time basis.The starting salary for the Highway Maintenance Worker Trainee 1 position is $48,855. This amount is comprised of the base salary of $39,855 with an additional geographic pay differential of $9,000, specific to this title and location.The starting salary for the Highway Maintenance Worker Trainee 2 position is $51,058. This amount is comprised of the base salary of $42,058 with an additional geographic pay differential of $9,000, specific to this title and location.The starting salary for the Highway Maintenance Worker 1 position is $53,430. This amount is comprised of the base salary of $44,430 with an additional geographic pay differential of $9,000, specific to this title and location.DOT is an equal opportunity employer. Disabled persons are encouraged to apply. In compliance with Public Law 99-603, candidates selected for appointment must provide an original document to prove their citizenship and/or legal right to work in the United States. Candidates for employment must have proper authorization to work in the United States at the time an offer of employment is made.

Highway Maintenance WorkerDuties DescriptionIndividuals selected must be able to respond to emergency callout within 1 hour during inclement weather, including all snow and ice conditions, to be considered for this position. Duties include but are not limited to: Perform routine manual tasks requiring medium to heavy physical effort involving exposure to all kinds of weather conditions. Will be expected to operate plows during winter operations and to obtain the equipment certifications listed above. Responsibilities may include serving a role within the Incident Command System to support the department's response to regional and statewide emergency situations.Minimum QualificationsHighway Maintenance Worker Trainee 1: Must be 18 years old, pass physical/medical examination and drug test, and possess a Class D Driver License. Highway Maintenance Worker Trainee 2: Must be 18 years old, pass physical/medical examination and drug test; and possess a Class A or B Commercial Driver License with no airbrake restriction. Candidates will be evaluated on their ability to satisfactorily operate a NYSDOT large dump truck within two weeks of appointment. Failure to pass will result in termination. Highway Maintenance Worker 1: Satisfactory completion of the Highway Maintenance Worker Traineeship 2 or one year of experience in the operation of highway construction, maintenance equipment, or other vehicles in excess of 26,000 Gross Vehicle Weight Rating with air brakes and possession of a Class A or B Commercial Driver License with DOT-specified endorsements, and two NYSDOT equipment operation certifications, in addition to the following three specific certifications: heavy dump truck, one person plowing with single or double wing, and front-end loader. Within the first two weeks of employment, applicant must satisfactorily complete NYSDOT Heavy Dump Certification or their employment will be terminated. NOTE: All candidates must pass a pre-employment physical/medical examination and drug test prior to beginning employment. Cannabis use is not permitted for employees in this title and assignment. Cannabis use will be tested for during the pre-employment screening process and may be the basis for disqualification for employment or may be a basis for removal from employment. Candidates who meet both of the following MAY be eligible to bypass the pre-employment physical: A valid CDL A or B AND a current (less than 2 years old) CDL Medical Certificate (form MCSA 5876) that meets specific criteria which will be discussed at the time of interview.Additional CommentsThe starting salary for the Highway Maintenance Worker Trainee 1 is $48,855. This amount is comprised of the base salary of $39,855 with an additional geographic pay differential of $9,000, specific to this title and location. The starting salary for the Highway Maintenance Worker Trainee 2 is $51,058. This amount is comprised of the base salary of $42,058 with an additional geographic pay differential of $9,000, specific to this title and location. The starting salary for the Highway Maintenance Worker 1 is $53,430. This amount is comprised of the base salary of $44,430 with an additional geographic pay differential of $9,000, specific to this title and location. DOT is an equal opportunity employer. Disabled persons are encouraged to apply. In compliance with Public Law 99-603, candidates selected for appointment must provide an original document to prove their citizenship and/or legal right to work in the United States. Candidates for employment must have proper authorization to work in the United States at the time an offer of employment is made. The Department will not sponsor a nonimmigrant for a temporary employment visa (H-1B or similar), OPT STEM, or for permanent residence. Offers of permanent employment may not be made to nonimmigrants whose employment authorization is limited to a period of practical training (F-1 or similar).

Kick start your career in Construction. Cianbro is seeking individuals interested in the construction industry who are committed to working hard. Heavy construction or industrial experience is a plus.

Job DescriptionAbout E-J: The E-J Group is active in all facets of electrical contracting, bringing experience, expertise, and a national reputation to projects that range in size up to more than $300 million. With over 4,000 employees across 31 offices, E-J delivers full-service electrical solutions for rail systems, transit facilities, office buildings, hospitals, power, renewable energy, clean energy, co-generation facilities, roadway and outdoor specialty work, airports, industrial facilities, data centers, chip plants, universities, sports stadiums, extra high voltage distribution, utility, and gas infrastructure. At E-J, three generations of family expertise have built an organization that combines practical knowledge with modern technological innovation, providing rapid and efficient solutions for today’s lighting, power, energy, and communication needs. E-J has over a 125-year reputation for integrity, quality, and exceptional service in the electrical field. To learn more, visit www.ej1899.com. Title/Role: Project Manager, Signal Systems Division: Large Specialty Projects Location: Long Island City, NY, with approximately 30% travel to Boston, MA, or Boston, MA-based 100% Reporting to: Senior Project Manager, Signals Position Description: We are seeking a Project Manager to lead vital signal systems scope on transit and rail infrastructure projects. The role covers wayside signal systems, interlockings, train control and PTC interfaces, signal power, and integration with adjacent transit systems including communications and traction power. The Project Manager owns the signal scope end to end: signal subcontractor and OEM supplier management, signal design coordination, schedule, cost, submittals, procurement, and testing and cutover support, while serving as the primary interface to the client and operating railroad. Work is executed in active railroad environments under public agency contracts, and the role requires strong documentation discipline and the ability to resolve technical and contractual conflicts before they affect the schedule. What You'll Do: • Manage the vital signal supplier and integrator subcontract and any train control or PTC scope, including scope exhibits, division-of-work matrices, and pass-through of prime contract terms, • Own the signal scope matrix. Track and resolve division of work between the vital signal integrator, the train control provider, and E-J as installer and balance-of-system contractor, • Coordinate signal design submittals and review cycles, including circuit plans, control line diagrams, cable plans, signal layouts, and bonding and grounding, • Manage installation of wayside signal scope including signal cases and houses, switch machines, derails, track circuits, impedance bonds, insulated joints, signal cable and duct, and signal power distribution and standby power, • Identify conflicts between signal specifications, drawings, and equipment appendices, and drive them to written client resolution early, • Coordinate signal scope with adjacent transit systems including communications, traction power, and mechanical and controls systems, • Create and manage cost-loaded project schedules, milestones, and deliverables tied to the program baseline and assigned WBS control accounts, • Procure and coordinate signal materials and long-lead equipment. Track lead times against milestone dates and escalate exposure, • Develop project budgets, monitor costs, and implement cost-saving measures when possible, • Prepare and negotiate change orders. Maintain contemporaneous notice and documentation consistent with prime contract notice provisions, • Coordinate signal testing and commissioning, cutovers, and force account and flagging windows with the client and operating railroad, • Attend and run project meetings & liaise with field supervision, • Provide regular project updates to clients and stakeholders, informing them of project status, risks, and milestones, • Maintain accurate project documentation, including progress reports, change orders, test records, as-builts, and project closeout documents, • Address any project-related issues, conflicts, or delays promptly and effectively, seeking solutions that maintain project progress, • Identify areas of process improvement and implement best practices to enhance project efficiency and profitabilityQualifications:, • Minimum of 5 years of project manager experience required, with signal systems experience on transit or rail projects, • Working knowledge of vital signal systems, interlockings, track circuits, grade crossing warning, train control and PTC, and signal power distribution, • Ability to read and administer signal design documents including circuit plans, control line diagrams, and cable plans, • Experience managing signal subcontractors, integrators, and OEM suppliers, • Familiarity with signal testing, commissioning, and cutover in active railroad environments, • Experience with public transit agency contracts, • Ability to read and administer contract documents, including identifying conflicts between specifications and appendices, • Bachelor's degree in engineering or construction management, or equivalent work experience in the electrical contracting/engineering space, • Proficiency in Microsoft Suite and Primavera P6, in addition to project management software; E-J currently uses Procore, Emque, Riskcast, Toric, and more, • Ability to obtain OSHA 30. Roadway worker protection certification or ability to obtain. Valid driver's license, • Strong organizational and multi-tasking skills with attention to detail, • Strong business acumen in project planning and management, • Excellent written and verbal communication skillsPreferred:, • Experience with commuter, intercity, or urban transit agencies such as Amtrak, MTA, LIRR, Metro-North, NJ Transit, MBTA, PATH, PATCO, SEPTA, or comparable, • Broader transit systems experience in communications or traction power, controlsAdvantages of Working at E-J:, • Leading Electrical Contracting Organization, • Oldest family-owned and operated electrical contractor since 1899, • Job training and mentorship, • Supportive Management Team, • Rewarding project experience, • Competitive compensation packages, • Comprehensive benefits, including medical, dental, vision, and 401K plan, • Paid holidays and vacation, • Merit-Based Bonus, • Tuition Reimbursement Program, • Team-oriented company culture, • History of employment longevityAnnual Salary Range: $130,000 – $165,000 The E-J Group is an Equal Employment Opportunity Employer and ensures equal employment opportunity for all persons without discrimination on the basis of race, color, religion, sex, sexual orientation, national origin, age, disability, marital status, citizenship, or any other characteristic protected by law. Powered by JazzHR fXwzwXUNrP

Job DescriptionDescription: The Paralegal will be responsible for working with attorneys and other departments and/or staff as assigned to provide support through all aspects of litigation in a variety of practice areas. Duties and Responsibilities • Under the supervision of an attorney, coordinate, organize, prepare, and interpret complex legal documents., • Coordinate with attorneys and paralegal Is to direct workflow on various cases., • Review, and maintain documents and case files; compile documents for filing with courts and relevant agencies., • Conduct electronic document reviews, coordinate productions of documents with attorneys, conduct searches of production databases for relevant documents, and conduct other related eDiscovery tasks., • Assist with drafting discovery, pleadings, and status reports., • Organize and conduct case-related team meetings as needed., • Review and draft summaries of discovery responses, document productions, and relevant records., • Assist with preparation and review of materials for court hearings and depositions., • Attend client meetings, conference calls, and other case related meetings with attorneys., • Conduct legal research and document review; perform factual research in internal and external databases and libraries., • Review and process vendor invoices for accuracy., • Coordinate and prepare for trials; attend trials if necessary and provide support to attorneys at court and agency hearings., • Accurately document and bill for all billable work and tasks according to billing procedures; meet annual billable hours requirement., • Communicate and interact with filing clerks, court room assistants and calendar clerks., • Liaise with outside vendors such as court reporters, experts, mediators, etc. This job description reflects management's assignment of essential functions; it does not prescribe or restrict the tasks that may be assigned. Qualifications: • At least 1 year of experience preferred, working as a legal secretary or paralegal, preferably with a focus on personal injury, or construction defect cases in the State of New York., • Familiarity with online databases and resources., • Strong organizational skills with the ability to manage multiple tasks and prioritize effectively., • Excellent written and verbal communication skills, with professionalism in client and colleague interactions., • Attention to detail and accuracy in document preparation and file management., • Proficiency in Microsoft Office Suite and other relevant software applications., • Ability to work independently, as well as collaboratively within a team environment., • Knowledge of third-party e-fling providers, including but not limited to One Legal, First Legal, Odyssey File & Serve, and Green Filing, a plus., • Knowledge of PACER and the federal Judiciary’s Case Management/Electronic Case Files (CM/ECF) system, a plus. Equal Opportunity Employer Kahana Feld provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training. Job Type Full-Time, Non-Exempt Supervisory Responsibilities None Work Location In-Office. Hybrid after 90-days of employment Work Schedule 8:30-5:30pm Monday-Friday. Occasional weekends and holidays. Physical Requirements Primarily sedentary work. Exerting up to 10 pounds of force occasionally and/or negligible amount of force frequently or constantly to lift, carry, push, pull or otherwise move objects. Repetitive motion. Substantial movements (motions) of the wrists, hands, and/or fingers. The worker is required to have close visual acuity to perform an activity such as: preparing and analyzing data and figures; transcribing; viewing a computer terminal; extensive reading. Work is performed in an office environment and requires the ability to operate standard office equipment and keyboards. Must have the ability to walk short distances, and/or drive a vehicle to deliver and pick up materials. Work can be performed with or without accommodations. Travel 5-10% domestic travel by car and by plane. Requirements:

KG in the United States is seeking a skilled worker (m/f/d) for technically demanding construction projects as part of one of our construction crews. The role requires completed vocational training in asphalt/road construction or relevant experience in related fields.

Job Description Busy Mechanical HVAC Construction Company looking for motivated, responsible, and energized Assistant Field Technician to join our team. Salary: $18.00 to $28.00 per hour, depending on experience. Job Type: Full-time Job Hours: Monday to Friday 8 hrs Per Day, 30 min Lunch, Hours Variable based on Project Needs, Must be able to do Overtime when necessary. PLEASE APPLY ONLINE. If you have difficulty uploading resume please by email to jobs@ramsmechanical.com and indicate your name and the position you are applying for in the email subject so we can add to your application for review. Ideal candidate will have basic knowledge of Mechanical HVAC systems, excellent communication & organization skills, strong willingness to learn, follow instructions, be a team player and have a "Can-Do" and "Get-It-Done" attitude. As many of our projects are with the NYC public schools (where we only have access after school is out) candidate must also be flexible on work hours and overtime as needed. Job will require travel to multiple jobsites though out the NYC area so it will be best if the candidate have clean valid driver’s license and a car or reliable methos of transportation to various jobsites. As our projects are mostly public construction jobsites, candidate will also need to have at least Site Safety Training SST 40 Worker card and OSHA 30 issued within the last 5 years. Qualifications: * Willingness to learn and follow directions * Excellent communication & organization * Strong Follow-up and follow-through skills * Must have a valid Driver's License * Must have a safe / clean driving record * Must have SST 40 Worker card and willing to acquire SST 62 Supervisor card * Must be willing to work various hours as jobsite requires * Must have basic Mechanical HVAC background / MEP trade experience & knowledge * Must have basic construction experience & knowledge * Must be reliable and responsible * Must have a "Can Do" and "Get the Job Done" attitude! * Must be comfortable driving large cargo vans / sprinters when needed * Must be comfortable driving in NYC, all 5 boroughs, and go to multiple jobsite locations * Must be able to follow directions and work as a member of a team * Must be able to move up to 60 lbs on a regular basis * Must be diligent about cleaning and maintaining the vehicles * Must be comfortable moving, loading, and off loading construction materials, equipment, tools, etc... * May be exposed to extreme temperature changes of 40 degrees or less for extended periods of time and noise Previous experience with public construction jobsites is A PLUS!

Job Description Application Support & Development Specialist CMCOM | Construction Management & Digital Infrastructure Solutions Hybrid – New York / New Jersey Full-Time Contract Assignment | Task Order-Based Assignment Salary Range: $120,000 – $160,000 annually (commensurate with experience and technical expertise) release management About CMCOM CMCOM is a Construction Management and Digital Infrastructure Solutions Provider delivering program oversight, project controls, engineering support, and technology-enabled execution for complex infrastructure and capital investment initiatives. We support large-scale transportation, utilities, tunnels, bridges, facilities, and resiliency programs by integrating construction management governance with modern enterprise systems, application development, performance reporting, and digital delivery tools. Position Overview CMCOM is seeking experienced Application Support & Development Specialists to support enterprise application development, enhancement, integration, maintenance, and operational support for a major transportation and infrastructure client in the New York/New Jersey region. This position is ideal for a technically strong professional with experience supporting complex enterprise environments and developing secure, scalable, and reliable business applications. The successful candidate will collaborate with technical teams, business stakeholders, project managers, and enterprise technology groups to design, develop, integrate, enhance, test, deploy, and maintain mission-critical applications and workflows. Key Responsibilities In this role, you will: • Design, develop, configure, test, and implement custom web applications and application components, • Support existing in-house and vendor-provided enterprise applications, • Develop and enhance applications using .NET, .NET Core, ASP.NET, C#, React, JavaScript, HTML, and CSS, • Develop and maintain Microsoft SQL Server-based solutions, • Design and support applications hosted within Microsoft Azure environments, • Develop applications and workflows using Microsoft SharePoint Online and Microsoft Power Platform, • Participate in requirements gathering, business-process analysis, system design, and technical architecture planning, • Develop responsive, accessible, secure, and user-friendly web applications, • Troubleshoot and resolve application defects, performance issues, and security vulnerabilities, • Refactor and modernize legacy applications and support migrations to newer frameworks or cloud-based architectures, • Support application upgrades, patches, releases, configuration changes, and deployments, • Develop and maintain APIs, web services, data feeds, and enterprise system integrations, • Support data exchange, synchronization, and reporting across multiple systems and databases, • Prepare technical designs, system documentation, specifications, user guides, and configuration documentation, • Support unit testing, integration testing, User Acceptance Testing, and performance testing, • Participate in deployment, release management, and post-implementation support activities Technical Areas of Experience Candidates should bring professional experience in one or more of the following areas: • .NET / .NET Core, • ASP.NET, • C#, • React, • JavaScript, • HTML / CSS, • Microsoft SQL Server, • Microsoft Azure, • Microsoft SharePoint Online, • Microsoft Power Platform, • REST APIs and Web Services, • Enterprise Application Integration, • Application Maintenance and Support, • Cloud-Based Application Development, • Application Security and Quality Assurance IBM Maximo Experience Candidates with IBM Maximo experience may support: • End-to-end IBM Maximo application support, • Functional and technical solution design, • Maximo configuration and development, • Systems integration and deployment, • Asset-management business processes, • Data migration and validation, • Application enhancements, • Development, testing, and production environments, • System monitoring and defect resolution, • Performance optimization, • Upgrades and patching, • User and administrator support Esri ArcGIS Experience Candidates with GIS expertise may support: • ArcGIS Enterprise, • ArcGIS Online, • Hybrid GIS environments, • GIS application development, • Web maps, applications, and dashboards, • Geospatial data management, • Data visualization and spatial analysis, • GIS system integrations, • System configuration and administration, • Performance monitoring and optimization, • Security configuration, • Upgrades and patching Required Qualifications The ideal candidate will bring: • Bachelor’s degree in Computer Science, Information Technology, Engineering, Information Systems, Software Engineering, or a related discipline, • Professional experience in enterprise application development, systems integration, or application support, • Demonstrated experience with Microsoft-based development environments, • Strong understanding of software development lifecycle practices, • Experience working across development, testing, staging, and production environments, • Strong analytical, troubleshooting, and problem-solving capabilities, • Ability to diagnose application, integration, database, and performance issues, • Strong technical documentation skills, • Ability to communicate effectively with technical teams, business stakeholders, project managers, and leadership, • Ability to manage multiple assignments and priorities in a fast-paced project environment Preferred Skills • IBM Maximo development, configuration, integration, or administration experience, • Esri ArcGIS Enterprise and ArcGIS Online experience, • Microsoft Azure cloud development experience, • SharePoint Online and Power Platform experience, • API and enterprise systems integration experience, • Experience modernizing legacy enterprise applications, • Experience supporting transportation, engineering, infrastructure, or public-sector organizations, • Knowledge of application cybersecurity and secure coding practices, • Familiarity with WCAG accessibility standards, • Experience supporting enterprise asset-management or GIS platforms Work Environment & Requirements • Hybrid assignment supporting projects throughout the New York/New Jersey region, • Work may be performed at client facilities depending on individual project requirements, • Typical on-site hours are approximately 7:00 AM to 4:00 PM, Monday through Friday, • Occasional support may be required during critical system releases or application issues, • Candidate must comply with client information-security and confidentiality requirements, • Candidate may be required to obtain a High-Level Secure Worker Access Consortium (SWAC) ID, • Personnel accessing protected systems or information must comply with all applicable facility and cybersecurity requirements Compensation & Benefits (Dependent on qualifications, experience, technical capability, and assigned role) Benefits Include: • Comprehensive medical, dental, and vision insurance, • Employer-supported retirement plan options, • Paid Time Off (PTO) and paid holidays, • Professional development and technical training support, • Opportunity to work on major transportation and infrastructure technology programs, • Exposure to enterprise-scale application environments and digital transformation initiatives, • Career growth across application development, digital infrastructure, project controls, and technology consulting, • Collaborative, high-performance culture focused on accountability and excellence Why Join CMCOM At CMCOM, you will join a mission-driven firm delivering infrastructure projects through disciplined project management, engineering expertise, and technology-forward execution. We offer: • Competitive compensation and benefits, • High-profile infrastructure and transportation program experience, • Exposure to enterprise application development and digital-transformation initiatives, • Opportunities to work with advanced Microsoft, Maximo, GIS, and cloud technologies, • Long-term growth across major public-sector infrastructure initiatives, • A team culture built on performance, integrity, innovation, and public service\nCompany Description CMCOM is a certified MBE/DBE/SBE construction management, engineering, and technology consulting firm providing owner-side support to public agencies across the New York region. We specialize in program controls, engineering systems integration, and digital transformation for clients such as the Port Authority of NY & NJ, NYC DEP, DCAS, DDC, and MTA. Our team combines construction management and advanced technology expertise to help agencies modernize infrastructure delivery and improve project transparency. CMCOM is a certified MBE/DBE/SBE construction management, engineering, and technology \r\nconsulting firm providing owner-side support to public agencies across the New York region. \r\nWe specialize in program controls, engineering systems integration, and digital transformation \r\nfor clients such as the Port Authority of NY & NJ, NYC DEP, DCAS, DDC, and MTA. \r\nOur team combines construction management and advanced technology expertise to help \r\nagencies modernize infrastructure delivery and improve project transparency.

Job Description Our Company: Originally founded in 1975, BCI has continually evolved to become a leader in the women's fashion industry. Launching initially with CHAUS and private label lines and then expanding into a multi-brand platform business, we have been at the forefront of market trends and the changing retail environment. Our brands, including CeCe, Vince Camuto, Ted Baker, 1.State and Parker, each serve unique customer demographics but are united in their commitment to quality and style. As we expand our presence, BCI remains dedicated to innovation, excellence, and women's empowerment through fashion. The Associate Designer will work closely with the Design Director on the development of the line. Responsibilities: • Support the Creative Director with the design process from initial inspiration to final production, • Communicate daily with sales and production to ensure design sheets are being completed properly and in a timely manner, • Create and execute on the vision of the Creative Director, ensuring that the product is consistent with market trends, while defining the brand identity and overall business strategy, • Develop Design sheets in Exenta (PLM System), • Update reorder bodies with new ideas while incorporating upcoming trends, • Source trims, prints and novelty fabrics with venders/In the market, • Choose matching linings, • Set up new silhouettes in prints and new fabrications in our in-house sewing room to get cut and sewn, • Support the head designer in creating and organizing a cohesive line, • Create inspiration boards Requirements • Minimum 4+ years of fashion design experience, • Background using PLM software required, • Knowledge of garment construction and patterns, • Proficient with Microsoft Excel, • Strong written and verbal communication, • Self-starter and proactive worker, • Enthusiastic and team-oriented with sense of urgency, • Knowledge of Exenta is not required, but is definitely a plus, • Basic knowledge of Pattern construction would be great, but not required, • Must be fluent in Photoshop and be able to sketch (Flats/Floats) in Procreate or Illustrator, • Must be proficient in creating tech packs, • Must have a strong understanding of placement prints, including how to effectively layout prints within garment patterns to maximize fabric yield, • Experience working in Procreate would be great, but not required, • Learns quickly and eager to learn all parts of the industry, • Must have an eye for Merchandising, Assorting Fabrics/Garments accordingly, • Must be comfortable with long hours, if needed The annual salary range for this full-time role is dependent upon experience between $70,000 - $85,000. Benefits • Health Benefits (Medical, Dental & Vision), • Life Insurance, • Flexible Spending Account, • 401k Program, • Paid Time Off, • Robust Holiday Schedule, • Commuter Benefits, • Training & Development, • Growth Opportunities! BCI IS AN EQUAL OPPORTUNITY EMPLOYER Applicants are considered regardless of race, color, religion, creed, age, sex, pregnancy, family responsibility, national origin or ancestry citizenship, marital status, sexual orientation, transgender status, veteran’s status, genetic information, or as a qualified individual with a disability or any other characteristic in accordance with applicable law.

Job Description Our Company: Originally founded in 1975, BCI has continually evolved to become a leader in the women’s fashion industry. Launching initially with CHAUS and private label lines and then expanding into a multi-brand platform business, we have been at the forefront of market trends and the changing retail environment. Our brands, including CeCe, Vince Camuto, Ted Baker, 1.State and Parker, each serve unique customer demographics but are united in their commitment to quality and style. As we expand our presence, BCI remains dedicated to innovation, excellence, and women’s empowerment through fashion. The Associate Designer will work closely with the Design Director on the development of the line. Responsibilities: • Support the Design Director with the design process from initial inspiration to final production, • Communicate daily with sales and production to ensure design sheets are being completed properly and in a timely manner, • Create and execute on the vision of the Creative Director, ensuring that the product is consistent with market trends, while defining the brand identity and overall business strategy, • Develop Design sheets in Centric PLM, • Update reorder bodies with new ideas while incorporating upcoming trends, • Source trims, prints and novelty fabrics with venders/In the market, • Choose matching linings, • Set up new silhouettes in prints and new fabrications in our in-house sewing room to get cut and sewn, • Support the head designer in creating and organizing a cohesive line, • Create inspiration boards Requirements • Minimum 3+ years of fashion design experience, • Knowledge of garment construction and patterns, • Must have experience with Centric PLM, • Proficient with Microsoft Excel, • Strong written and verbal communication, • Self-starter and proactive worker, • Enthusiastic and team-oriented with sense of urgency, • Basic knowledge of Pattern construction would be great, but not required, • Must be fluent in Photoshop and Illustrator, • Must be proficient in creating tech packs, • Must have a strong understanding of placement prints, including how to effectively layout prints within garment patterns to maximize fabric yield, • Experience working in Procreate would be great, but not required, • Must be able to sketch (Flats/Floats) in Procreate or Illustrator, • Learns quickly and eager to learn all parts of the industry, • Must have an eye for Merchandising, Assorting Fabrics/Garments accordingly, • Portfolio required. The salary range for this full-time role is dependent upon experience between $70,000 - $80,000. Benefits • Health Benefits (Medical, Dental & Vision), • Life Insurance, • Flexible Spending Account, • 401k Program, • Paid Time Off, • Robust Holiday Schedule, • Commuter Benefits, • Training & Development, • Growth Opportunities! BCI IS AN EQUAL OPPORTUNITY EMPLOYER Applicants are considered regardless of race, color, religion, creed, age, sex, pregnancy, family responsibility, national origin or ancestry citizenship, marital status, sexual orientation, transgender status, veteran’s status, genetic information, or as a qualified individual with a disability or any other characteristic in accordance with applicable law.

Job Description Do you have a knack for style? A way with people? Then you could be the perfect fit. Proper Cloth is one of the most respected and premium menswear brands in NYC that is also values-driven and has opportunities for growth. We're looking for a part time Showroom Sales Associate to assist clients that come to one of our showrooms (either our Midtown or Soho showrooms). As a Showroom Client Advisor you will be instrumental in representing the Proper Cloth brand in person. You will learn all about dress shirt fabrics, garment construction, custom suiting, and how to design dress shirts/suits to fit properly. In this role you will become an expert in menswear and custom clothing, fabrics, shirts, and everything that goes into making someone look good and feel good. We strive to deliver an extraordinary shopping experience, and as a Showroom Client Advisor, this will be your specialty. We're a small team and the right person has the potential to make a big difference. You’ll be getting hands on experience by interacting and selling to our high end clientele. This is not a typical retail job running a cash register and folding sweaters - instead you will be immersed in the world of luxury menswear and having fun while doing it. We are open to clients by appointment. We are looking for candidates with weekend availability, ideally available Friday through Monday, or some availability within those four days of the week. Requirements • Take measurements and assist clients with creating their custom clothing sizes, • Help clients understand fabrics and design options, • Provide clients with style advice, • Help clients make adjustments to their custom garments for a perfect fit, • Assist clients in placing their orders, • Ensure showroom is orderly and product well presented Who you are: • Reliable and punctual, • Positive with a friendly attitude, • A hard worker who will do what it takes to get the job done, • Motivated to be your best self every day, • Selling is one of your key strengths, • Excited to learn everything there is to know about menswear and Proper Cloth! Benefits • Generous custom clothing allowance!, • Employee discount on items beyond clothing allowance, • Free lunches & snacks, • Hourly wage of $30 Important Notice: Recruitment scams are on the rise, and we want to ensure your safety. Please verify that any communication you receive from "Proper Cloth" is sent from an official @propercloth.com email address. If you receive a suspicious message or are unsure about its authenticity, please contact us directly through our website. Your security is our priority.

Job Description Do you have a knack for style? A way with people? Then you could be the perfect fit. Proper Cloth is one of the most respected and premium menswear brands in NYC that is also values-driven and has opportunities for growth. We're looking for a Showroom Lead Client Advisor to assist clients in our beautiful Soho showroom. As a Showroom Lead Client Advisor you will be instrumental in representing the Proper Cloth brand in person. You will possess knowledge about dress shirt fabrics, garment construction, custom suiting, and how to design dress shirts/suits to fit properly so that our customers will look and feel good after visiting us in the showrooms. Your Mission as a Showroom Lead Client Advisor is to provide Proper Cloth customers with friendly, efficient, and accurate showroom support and help ensure the showroom runs smoothly when the Showroom Manager is not present. You will act as a role model to other Client Advisors by demonstrating the behaviors and results needed to exceed the expectations of our customers. We're a small team and the right person has the potential to make a big difference. You’ll be getting hands on experience by interacting and selling to our high end clientele. This is not a typical retail job running a cash register and folding sweaters - instead you will be immersed in the world of luxury menswear and having fun while doing it. Requirements • Take measurements and assist clients with creating their custom clothing sizes, • Help clients understand fabrics and design options, • Provide clients with style advice, • Help clients make adjustments to their custom garments for a perfect fit, • Assist clients in placing their orders, • Ensure showroom is orderly and product well presented, • Handle escalated customer issues and resolve conflicts between team members when the Showroom Manager is not present, • Manage the appointment schedule to ensure appropriate time slots are open, Client Advisors are productive with similar appointment opportunities, and all customers are greeted and handled as quickly as possible when the Showroom manager is not present, • Provide advice to Client Advisors for size adjustments and product suggestions as needed, • Ensure the showroom is clean and orderly at all times, • Close the showroom according to the closing checklist at the end of day when the Showroom Manager is not present Who you are: • Possess the confidence and resilience to handle stressful, uncomfortable situations, providing polite leadership, calm diplomacy, and thoughtful suggestions to resolve conflicts amicably., • Reliable and punctual, • Respectful to customers and co-workers and contribute to a positive, productive, team oriented work atmosphere, • A hard worker who will do what it takes to get the job done and exceed goals, • Motivated to be your best self every day, • Selling is one of your key strengths, • Accepting of feedback from manager and peers graciously, and adaptive to new company initiatives with an open mind Benefits • Full health benefits, • Competitive 401(k), • Generous custom clothing allowance!, • Employee discount on items beyond clothing allowance, • Free lunches & snacks, • Monthly Bonus Incentives, • Salary range is $65,000-$70,000

Bobyard is seeking a Founding Account Executive to establish and grow our presence in the UK.You will own the full sales cycle, from outbound prospecting to closing, and build a repeatable sales motion in a market still validating product-market fit.You'll partner with a UK SDR and drive opportuniti

MAINTENANCE & FACILITIES TECHNICIAN.We are seeking a reliable, skilled, and proactive Maintenance & Facilities Technician to support our baker.This position is responsible for completing general repairs, preventive maintenance, and routine facility inspections to keep each location safe, functional,

Responsibilities Observe and comply with all company and specific site safety and project policies Supply input to Job Safety Analysis (JSA) and frequent improvements or changes to the Job Safety Analysis Plan (JSAP) Dig ditches or trenches, backfill excavations, compact and level earth to grade spe

The primary responsibility of the Facilities Handyman is to perform repairs and maintenance throughout their assigned restaurants as needed.The handyman will use problem-solving and technical skills to solve maintenance problems.The Facilities Handyman will also execute weekly walkthroughs and worki

UPS Seasonal Warehouse Workers. Looking for a fast-paced role that keeps you moving? As a seasonal warehouse worker, also known as package handlers, you’ll help keep packages moving through the UPS network by loading and unloading trailers and delivery vehicles.

UPS Seasonal Warehouse Workers Looking for a fast-paced role that keeps you moving? As a seasonal warehouse worker, also known as package handlers, you’ll help keep packages moving through the UPS network by loading and unloading trailers and delivery vehicles. Seasonal Warehouse Worker UPS Quick

McElroy, Deutsch, Mulvaney & Carpenter, LLP has nearly 120 attorneys working from 11 offices across 9 states.We deliver comprehensive legal services to individuals, corporations, and public and private organizations, spanning a variety of industries and professional disciplines.McElroy Deutsch is se