Trabajos cost engineer en Wayne, New JerseyCrear alertas

Job Title: Radiology Service Engineer Location: Cooperman Barnabas Medical Ctr Department Name: Imaging Services Req #: 0000217059 Status: Hourly Shift: Day Pay Range: $28.15 - $43.64 per hour Pay Transparency: The above reflects the anticipated hourly wage range for this position if hired to work in New Jersey. The compensation offered to the candidate selected for the position will depend on several factors, including the candidate's educational background, skills and professional experience. Reports to assigned work locations as required to meet organizational needs. RSE2 demonstrates confidence using tools and test equipment to perform preventative maintenance and service on radiological equipment. Ensures radiological equipment meets manufacture specifications and is safe for patient care. Demonstrates troubleshooting skills necessary to complete most repairs on multiple modalities. When necessary provides information to assisting engineers to minimize down time and loss of continuity of care. Aids team members and other clinical engineering staff both remotely and onsite as required. Documents all work performed in a timely fashion and participates in the radiology emergency on-call program. Staff assists management in meeting regulatory requirements and department/organizational goals. Performs other duties as assigned or required. Qualifications: Required: * • Minimum AAS degree in Biomedical Engineering, Electronics Engineering Technology or equivalent work/military experience on radiology equipment., • 3+ years of experience servicing radiology equipment on more than one vendor and/or modality, • Can demonstrate proficient use of hand tools, • Working knowledge of electricity/electronics, • Working knowledge of mechanical and electro-mechanical components, • Can demonstrate proficient use of electronic test equipment including oscilloscope, • Can complete most repairs without assistance, • Working knowledge of MS-Office and other computer applications, • Working knowledge of computers and networks, • Working knowledge of radiological safety procedures, • Multiple manufacture certifications, • Attentive to detail and excellent follow-up with customers., • Excellent customer service skills, • Ability to work under pressure, • Ability to attend vendor technical training regardless of method or location, • Valid NJ Driver’s License Scheduling Requirements: • Days to work- 8A-4P M-F, occassional Saturday, • Full-Time, • Working Location(s): Livingston, possible local travel to other RWJBH sites Essential Functions: • Conducts preventive maintenance inspections appropriate to level of job competence using appropriate productivity & quality measures., • Completes monthly assigned tasks within the specified timeframe prioritizing inspections of high risk over low risk equipment., • Recognizes unsafe conditions & notifies appropriate management team members to correct them., • Works collaboratively with senior technical staff to creates & enter PM procedures following manufacturer guidelines., • Effectively responds to service requests, competently troubleshoots & repairs medical equipment appropriate to job proficiency level using established productivity & quality measures, demonstrating good judgment on performing component vs. circuit board level repairs., • Demonstrates the need to maintain an adequate level of parts on hand as applicable, to assist in keeping downtime to an absolute minimum., • Timely and accurately documents all service requests and repairs in the biomedical equipment database., • Inspects new devices & equipment with competence appropriate to job proficiency level. This includes judgment on safety, compliance with codes, standards & ability to learn about the function/performance of new devices with speed & comprehension., • Secures all required device information for biomedical equipment database., • Demonstrates the need to have current service and operator manuals on hand for proper servicing of all types of medical equipment., • Assists Manager in maintaining and fulfilling the department/organizational regulatory requirements and goals., • Complies with system, hospital and departmental policies and procedures and objectives., • Reports witnessed violations that put patients, staff, department or facility in jeopardy to appropriate management personnel., • Demonstrates a thorough knowledge of shop safety including the use of electronic test equipment., • Assists Manager with responding to/correcting medical equipment recalls/device alerts from manufactures and/or F.D.A., • Participates in On Call duties after normal working hours. Must respond to a call within 15 minutes by telephone, and report to the facility within a maximum of one hour if required to be on site., • Ability to give technical instruction to users over the phone minimizing equipment downtime while providing the continuum in patient care, and organizational cost effectiveness.

Position Summary The Field Systems Engineer (FSE) is responsible for attending to service needs of bioMerieux customers within their assigned geographic territory, as well as nationally, on an as-needed basis, utilizing appropriate tools and test equipment. This position requires someone who is a self-starter, with the ability to deliver a best-in-class customer experience, while working remotely without direct supervision and able to conduct overnight travel on short-notice. Typical weekday travel is defined as daily customer visits not requiring overnight travel but expect daily driving of 50% or more. Weekend and Holiday rotational coverage is scheduled with the expectation of additional driving or flying within and/or outside of the standard assigned service region. Standard field service operations for customer support consists of approximately 15% of annual OnCall with the expectation of overnight travel when qualified on products. You will partner directly with a variety of Clinicians, Scientists, Technicians, Biomedical Engineers, and Lab Leadership to optimize the performance of bioMerieux’s diverse product portfolio. Primary Duties Territory Management: 60% • Customer Service & Technical Execution: Promptly respond to customer needs and perform installations, maintenance, upgrades, and repairs using electronic and computer skills to ensure instruments meet specifications., • Relationship Building & Sales Support: Build trust with customers, promote service agreements, and identify sales opportunities for cross-functional teams., • Training Travel: Attend 6–9 weeks of product training at Durham, NC or St. Louis, MO offices within the first year; future trainings occur as needed., • Customer Visit Travel: Travel includes both scheduled and unscheduled visits, with increased overnight stays for wide territories and occasional national travel., • Documentation & Compliance: Timely and accurate completion of service work orders, QA checklists, and internal training requirements., • Scheduling & Reporting: Maintain an up-to-date calendar of availability and submit travel expense reports regularly to avoid penalties., • Asset & Inventory Management: Maintain spare parts inventory, company-issued vehicle, and all assigned equipment (e.g., laptop, tools, test devices) in good condition and per policy., • Professional Development & Collaboration: Continuously improve technical and interpersonal skills, meet annual priorities, and collaborate with sales and applications teams to enhance customer experience., • Strategic & Promotional Support: Represent bioMerieux professionally, support trade shows as needed, and provide feedback to Sales, Marketing, and Customer Service to help expand service capabilities, • Perform all work in compliance with company quality procedures and standards., • Performs other duties as assigned. Qualifications Education and Training • Bachelor degree in Engineering, Electronic Technology, Computer Science, Biomedical or other related discipline., • 4 years related experience including military experience will be accepted in lieu of a bachelor's degree, • Have and maintain a valid driver’s license in state of residence Experience • 2+ years of related experience with degree in complex electro-mechanical, electronic, computer, electrical required, • 6+ years of related experience in lieu of degree in complex electro-mechanical, electronic, computer, electrical required, • Experience in troubleshooting and/or repair of biomedical, mechanical, electrical, vacuum systems, or similar systems strongly preferred, • Experience operating independently including managing schedules, customer expectations, and communications both internally and externally; prioritizing tasks; and resolving technical issues without direct oversight preferred, • Experience in a field service role preferred, • Experience with host/remote communications and network systems preferred, • Experience in the principles and practices of laboratory operations preferred Knowledge, Skills, and Abilities • Functional skills including critical thinking, adaptability, time management, communication, problem-solving and digital literacy., • Technical skills with mastery level commensurate to the job level, marked by specialization and innovation in the field of work., • Technical learning aptitude to quickly understand and acquire new technical knowledge and skills., • Flexibility, being highly adaptable and resilient to thrive in a dynamic work environment., • Learning agility to be able to learn from experiences and apply that knowledge to new situations., • Manage and meet competing deadlines, requiring careful prioritization and time management to ensure all tasks are completed on time., • Detail orientation to complete tasks without errors and produce high-quality work., • Make timely decisions by quickly choosing effective solutions in high-pressure situations for optimal outcomes, • Thriving in a fast-paced environment by managing tasks, multitasking, and adapting quickly to maintain productivity., • Organizing work and resources efficiently to ensure smooth operations, • Practicing time management to allocate tasks, balance priorities, and meet deadlines efficiently, • Troubleshooting issues to identify and resolve problems efficiently, • Demonstrates assertiveness and confidence in the face of a challenge, • Solution oriented in the face of conflict, • Action Oriented: Takes action even when facing challenges, • Perseverance: Demonstrates perseverance and a focus on outcomes, • Ability to cooperate with others at all levels including leadership, • Written Communications - including the ability to communicate technical data in written form, • Effective verbal communication skills, • Easily accessible and open to communication, • Build and maintain positive, productive interactions with colleagues, • Fosters a culture of inclusiveness among all team members, • Participate in a way that enhances team performance and cohesion., • Consistently uphold and reflects the core ethical principles and values that bioMérieux promotes, • Maintain composure by having the skill of staying calm, focused, and professional in high-pressure or stressful situations., • Emotional intelligence by having the ability to recognize, understand, and manage one's own emotions, as well as the emotions of others. Working Conditions and Physical Requirements • Ability to remain in stationary position, often standing, for prolonged periods, • Ability to ascend/descend stairs, ladders, ramps, and the like, • Ability to wear PPE correctly most of the day, • Ability to operate heavy machinery, • Ability to adjust or move objects up to 50 pounds in all directions, • Domestic travel required up to 90% of time The estimated wage range for this field based role in New Jersey is between $32.90 and $45.00 per hour. This role is eligible to receive a variable annual bonus based on company, team, and individual performance per bioMerieux’s bonus program. This range may differ from ranges offered for similar positions elsewhere in the country given differences in cost of living. Actual compensation within this range is determined based on the successful candidate’s experience and will be presented in writing at the time of the offer. In addition, bioMérieux offers a competitive Total Rewards package that may include: • A choice of medical (including prescription), dental, and vision plans providing nationwide coverage and telemedicine options, • Company-Provided Life and Accidental Death Insurance, • Short and Long-Term Disability Insurance, • Retirement Plan including a generous non-discretionary employer contribution and employer match., • Adoption Assistance, • Wellness Programs, • Employee Assistance Program, • Commuter Benefits, • Various voluntary benefit offerings, • Discount programs, • Parental leaves #li-us #biojobs PandoLogic. Keywords: Medical Laboratory Technician (MLT), Location: Clifton, NJ - 07012

Manufacturing Engineer Needed For Leading Manufacturing Company This Jobot Job is hosted by: Kevin Finlay Are you a fit? Easy Apply now by clicking the "Quick Apply" buttonand sending us your resume. Salary: $100,000 - $135,000 per year A bit about us: My client is a leading manufacturing company and is growing! They are looking to add a Manufacturing Engineer who will participate in identifying waste, defining value streams, productivity optimization, Kanban setups, takt time studies, labor tracking, ergonomics, material flow, pFMEA, and similar Lean Six Sigma tools. Why join us? Compensation Up To $135,000 Other Benefits Include Medical, Dental and Vision 401 (k) with company match Holiday, Vacation and Sick Time Tuition Reimbursement Health Savings Accounts (HAS) Flexible Spending Accounts (FSA) Cigna Wellness Incentive Program Employee Assistance Program (EAP) Short Term Disability Group Life and Accidental Insurance Sun Life – Accident, Critical Illness, and Hospital Indemnity Insurance Smoking Cessation Program Pet Insurance Job Details Responsibilities: Analyze blueprints, specifications, model files (CAD) and other documentation to prepare accurate simulations and supportive data sets / process models for manufacturing projects, particularly those involving insert injection molding of thermoplastics, precision machined components, and/or complex sub-assemblies for the MedTech industry Integrate fully as a partner to Business Development and Solutions Architecture Teams, with primary objective to drive new business opportunities, sales expansion – and further increase competitive advantage through systems engineering and application of Industry 4.0 practices Collaborate with engineering, production, procurement and accounting teams to gather actual cost data, historical summaries of previously quoted business (including tooling costs/lead-times, engineering resource utilization, and achieved manufacturing standards relative to those estimated) with the purpose of refining new business and existing business quotations to drive growth Partner with IT / ERP Teams (Business Analysts) and Manufacturing expand the use of existing systems for real-time / actual data collection, and adoption of new systems for manufacturing data acquisition and process optimization modeling Utilize software tools and engineering knowledge to develop detailed cost models for materials, labor, equipment, and other resources – beyond the print / model provided (look for optimization opportunities) Identify the best possible manufacturing processes and evaluate based on wholistic process flow, all process steps equipment / manufacturing processes for optimized efficiency and cost-effectiveness Generate internal business cases, including projected ROI for CapEx spending justification in collaboration with Accounting Partners; as well as “preferred site” status for manufacturing based on costs, labor availability, and capacity utilization Utilize SolidWorks, CAD/CAM software packages for product DFM, and conceptualization of proposals Utilize and/or identify and Deploy software tools to facilitate data acquisition and analysis, such as Minitab, Sage, Flexsim, Paperless parts or similar Requirements: Bachelor's degree in Engineering (Mechanical, Industrial engineering, Systems engineering, Value engineering) Minimum of 5 years of experience in value engineering, industrial engineering, manufacturing costing, and related role in the manufacturing industry, with specific experience utilizing industry 4.0+ best practices and/or Lea Experience working for a Contract Manufacturer or OEM Strong engineering background with a solid understanding of manufacturing processes, materials, and equipment Knowledge, Skills and Abilities Required: Ability to identify the best possible manufacturing processes Proficiency in using SolidWorks or equipment CAD/CAM software packages for estimating and DFM purposes Experience in product level design for manufacture (DFM) Ability to collaborate across engineering Centers of Excellence for multi-plant vertically integrated proposals Interested in hearing more? Easy Apply now by clicking the "Quick Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

Construction Estimator Opportunity With Private Equity & Venture Capital Backed EV and Retail Operator! Great Compensation Package, Full Benefits, Bonus and Hybrid Flexibility! This Jobot Job is hosted by: Ben Kimbrel Are you a fit? Easy Apply now by clicking the "Quick Apply" buttonand sending us your resume. Salary: $100,000 - $150,000 per year A bit about us: We specialize in deploying EV charging infrastructure along major highway corridors. we handle every aspect of our charging stations in-house, from design and development to operations and maintenance, all supported by strong partnerships with top DC fast-charging suppliers. Based in New Jersey, we are committed to expanding nationwide and making sustainable, accessible transportation a reality for all. This is a great opportunity for a construction Estimator or Cost Engineer with 3+ years of experience at an owners rep or a GC and looking to transition to the owners representative side of construction! Why join us? Health, Dental, Vision and Life insurance Remote flexibility 401k match HSA and FSA plans Annual performance based bonuses Paid time off and holidays Parental leave Job Details Is your background a fit? Apply if you meet this criteria: 4-Year Degree in Architecture, Construction Management, Engineering, Project Management, or a related discipline 3+ years construction procurement management experience (required) Experience estimating commercial vertical construction, utilities, site work or electrical projects Interested in hearing more? Easy Apply now by clicking the "Quick Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

Your new company HAYS Recruitment is currently partnered with a full service engineering, design, and consulting firm. We are looking for a driven and detail-oriented Senior Commissioning Engineer who can lead the execution of projects and provide expert consultation. Join this dynamic engineering team, who are committed to delivering high-value energy solutions. Your new role • Plans, schedule, conduct and coordinate detailed phases of a project independently with other engineering disciplines, • Provide guidance and mentorship for junior level staff, • Work on innovative projects that balance cost-saving measures with long-term sustainability goals, • Provide technical development of proposals and external presentations for clients and regulatory agencies, • Monitor progress and performance on projects to ensure efficient production What you'll need to succeed • Bachelor's degree in Mechanical Engineering or related field required, • PE License required, • 10+ years of engineering experience relating to commissioning, • Must be able to understand construction documents, and fully understand the design and intended operation of the associated mechanical systems, • Experience with BAS systems, • Advanced proficiency with AutoCad, Revit, MicroStation, • Ability to demonstrate leadership skills and effectively work in a collaborative environment; proven ability to lead a team What you'll get in return • Compensation: $105-126K base, • Significant opportunity for bonus, • 401K, • Generous PTO package, • Full medical benefits, • Opportunity to work on impactful energy projects What you need to do now If you're interested in this Senior Commissioning Engineer role, click 'apply now' to forward an up-to-date copy of your resume, or call us now. If this job isn't quite right for you, but you are looking for a new position, please contact us for a confidential discussion about your career.

Company Overview KLA is a global leader in diversified electronics for the semiconductor manufacturing ecosystem. Virtually every electronic device in the world is produced using our technologies. No laptop, smartphone, wearable device, voice-controlled gadget, flexible screen, VR device or smart car would have made it into your hands without us. KLA invents systems and solutions for the manufacturing of wafers and reticles, integrated circuits, packaging, printed circuit boards and flat panel displays. The innovative ideas and devices that are advancing humanity all begin with inspiration, research and development. KLA focuses more than average on innovation and we invest 15% of sales back into R&D. Our expert teams of physicists, engineers, data scientists and problem-solvers work together with the world's leading technology providers to accelerate the delivery of tomorrow's electronic devices. Life here is exciting and our teams thrive on tackling really hard problems. There is never a dull moment with us. Job Description/Preferred Qualifications With over 40 years of semiconductor process control experience, chipmakers around the globe rely on KLA to ensure that their fabs ramp next-generation devices to volume production quickly and cost-effectively. Enabling the movement towards advanced chip design through greater chemical process control is KLA's ECI Technology division. ECI is an industry leader of in-process chemistry control, providing the precision of analysis the industry requires for consistent wafer quality while reducing chip feature size. Advanced wafer design drives the need for precision with reliability; ECI strives to lead the design of analytical equipment which can withstand the rigorous demands of the chemical processes for damascene, wafer-level packaging, clean and wet etch processes, with our Prima, Libra, Quanta and QualiSurf product lines. A successful Mechanical Design Engineer will work in the Mechanical Department of KLA ECI division based in Totowa, NJ. You will be responsible for the design process of mechanical part of new systems, including conceptual and detailed design using CAD systems (Autodesk Inventor, AutoCAD), detailed drawings, design review presentations. • Independently execute sustaining engineering projects by creating and updating 3D CAD models, subassemblies, and system layouts for analyzers and dosers derived from existing platforms., • Develop flow diagrams and system schematics based on customer requirements and engineering specifications., • Design and integrate mechanical, fluidic, and optical assemblies (e.g., pumps, valves, tubing, fittings, spectrometers, light sources, optics, electrodes, and motors) to ensure proper mounting, alignment, routing, and service access., • Create and maintain bills of material (BOMs) to support manufacturing, service, and supply chain., • Prepare documentation packages for release (e.g., drawings, assembly instructions, installation layouts, labeling, and supporting engineering documents) in accordance with internal standards., • Adapt designs for different chemistries, including material compatibility, wetted-path requirements, sealing approaches, tubing/fitting selection, and corrosion/chemical resistance considerations., • Adapt designs for varying tank counts and configurations, including sizing/arrangement, mounting, plumbing routing, access/service clearances, and shipping constraints., • Define facility requirements (utilities, footprint, clearances, and interface constraints) for system layouts based on customer site requirements., • Create and process Engineering Change Orders (ECOs) / Change Orders (COs) to release new or revised parts, assemblies, and documentation; maintain traceability and accurate revision history., • Bachelor's degree in Mechanical Engineering or related discipline (or equivalent practical experience)., • 2-5 years of mechanical design experience in electro-mechanical products, instruments, or industrial equipment; sustaining engineering experience preferred., • Proficiency with 3D CAD and drawing creation (e.g., SolidWorks, Creo, Inventor, or similar), including assemblies, subassemblies, and configuration management., • Ability to create/read system schematics and flow diagrams (P&ID-style) and translate customer requirements into mechanical layouts., • Working knowledge of fluidic component selection and integration (pumps, valves, tubing, fittings) including routing, serviceability, and leak prevention., • Exposure to optical/electrochemical/mechatronic hardware integration (mounting, alignment, cable/tube management, access for calibration and maintenance)., • Experience creating and maintaining Bills of Material (BOMs) and supporting documentation packages (drawings, assembly instructions, installation layouts, labeling) to internal standards., • Understanding of material compatibility and chemical resistance considerations for wetted-path designs (seals, elastomers, plastics, metals) and corrosion/compatibility tradeoffs., • Knowledge of basic manufacturing methods and DFM/DFA principles; ability to assess tolerance stack-ups and perform fit checks., • Familiarity with engineering change control processes (ECO/CO), revision history, and traceability in a PLM/ERP environment., • Hands-on prototype/build support and troubleshooting skills, including root-cause analysis and implementation of corrective actions., • Strong communication and cross-functional collaboration skills (manufacturing, service, supply chain, and systems/electrical engineering); able to work independently and manage multiple priorities. Minimum Qualifications Master's Level Degree and 0 years related work experience; Bachelor's Level Degree and related work experience of 2 years Base Pay Range: $85,600.00 - $145,500.00 Annually Primary Location: USA-NJ-Totowa-KLA KLA's total rewards package for employees may also include participation in performance incentive programs and eligibility for additional benefits including but not limited to: medical, dental, vision, life, and other voluntary benefits, 401(K) including company matching, employee stock purchase program (ESPP), student debt assistance, tuition reimbursement program, development and career growth opportunities and programs, financial planning benefits, wellness benefits including an employee assistance program (EAP), paid time off and paid company holidays, and family care and bonding leave. Interns are eligible for some of the benefits listed. Our pay ranges are determined by role, level, and location. The range displayed reflects the pay for this position in the primary location identified in this posting. Actual pay depends on several factors, including state minimum pay wage rates, location, job-related skills, experience, and relevant education level or training. We are committed to complying with all applicable federal and state minimum wage requirements where applicable. If applicable, your recruiter can share more about the specific pay range for your preferred location during the hiring process. KLA is proud to be an Equal Opportunity Employer. We will ensure that qualified individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. Please contact us at ___ or at +1-408-352-2808 to request accommodation. Be aware of potentially fraudulent job postings or suspicious recruiting activity by persons that are currently posing as KLA employees. KLA never asks for any financial compensation to be considered for an interview, to become an employee, or for equipment. Further, KLA does not work with any recruiters or third parties who charge such fees either directly or on behalf of KLA. Please ensure that you have searched ___ for legitimate job postings. KLA follows a recruiting process that involves multiple interviews in person or on video conferencing with our hiring managers. If you are concerned that a communication, an interview, an offer of employment, or that an employee is not legitimate, please send an email to ___ to confirm the person you are communicating with is an employee. We take your privacy very seriously and confidentially handle your information.

Senior Electrical Engineer This Jobot Job is hosted by: Jim Forman Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $155,000 - $175,000 per year A bit about us: We are seeking a dynamic and motivated Electrical Engineer to join our fast-paced engineering team. This role offers a fantastic opportunity for an experienced professional to work on a variety of projects, applying their expertise in electrical design, circuit design, and consulting. The successful candidate will be responsible for designing and developing electrical systems, working closely with various teams to ensure project objectives and timelines are met. The role requires a deep understanding of BIM, Arcc Flash, AutoCAD or Revit. Why join us? This is a fantastic opportunity for an experienced Electrical Engineer to join a dynamic and innovative team, working on a variety of exciting projects. If you have the required skills and experience, we would love to hear from you. Job Details Responsibilities: • Design and develop complex electrical systems and circuits, ensuring compliance with all relevant regulations and standards., • Use software such as AutoCAD or Revit to create detailed electrical design drawings., • Conduct detailed calculations to establish manufacturing, construction, and installation standards and specifications., • Collaborate with multidisciplinary project teams, providing electrical engineering expertise., • Use BIM and Arcc Flash for effective project management and coordination., • Provide consulting services to clients, advising on best practices, potential improvements, and cost-effective strategies., • Conduct thorough inspections to identify faults and issues, implementing corrective actions where necessary., • Stay updated with the latest advancements in electrical engineering and propose new innovative solutions to improve project efficiency and effectiveness., • Bachelor’s degree in Electrical Engineering or a related field from an accredited institution., • A minimum of 5 years of experience in electrical engineering, specifically in design and consulting., • Proficient in the use of design software such as AutoCAD or Revit., • Extensive experience with BIM and Arcc Flash., • Proven experience in developing complex electrical designs and circuit designs., • Excellent analytical and problem-solving skills., • Strong communication and consulting skills, with the ability to effectively present complex technical information., • Detail-oriented with a strong focus on quality and accuracy., • Ability to manage multiple projects concurrently and meet tight deadlines., • Professional Engineering (PE) license is preferred. Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

Job Description A multi-discipline engineering firm with over 70 years in business is looking for a Water/Wastewater Discipline Engineer for their Parsippany office! Responsibilities: • Use technical knowledge/experience to lead projects, • Manage projects from planning/design to construction of wastewater conveyance systems (pipelines, pump stations storage, and end-of-pipe treatment facilities), • Prepare, review, and approve project drawings, specifications, schedules, and cost estimates, • Lead construction documents/specifications development, • Manage engineering services during construction, • Coordinate project tasks with other disciplines, • Develop medium/large planning and design projects, • Prepare complete construction packages, • Create/manage cost estimates and project schedule, • Complete tasks on schedule and within budget, • Prepare detailed engineering calculations and analysis, • Assist with business development (proposal development/preparation and client management), • Meet/exceed client expectations, • Mentor/train junior staff Requirements: • Bachelor’s degree in civil, environmental, chemical or mechanical engineering or related field of study, • 8+ years of experience in the planning, design, and construction of municipal water/wastewater, • Prior experience in process design, treatment plants upgrades and pump station design, • Experience writing/developing proposals, • Experience utilizing design software to solve complex issues, • PE License, • Strong data analysis and technical problem solving experience Salary is commensurate with experience. Successful applicants must be authorized to work in the USA without sponsorship. All qualified applicants will receive consideration for employment without regard to protected veteran status, disability, race, color, religion, sex, sexual orientation, gender identity, or national origin. Please contact Laura Harrison for further information! 517-906-6926

Job DescriptionPosition Summary We are seeking a talented and motivated Junior to Mid-Level Civil Engineer to join our growing team. This role would be held near the Lincoln Park, NJ office and offers the opportunity to engage in a variety of municipal, public, and private sector projects, including land development, transportation improvements, utility infrastructure, and municipal engineering. The ideal candidate will have a strong background in site design, permitting processes, and civil infrastructure development, with the flexibility to navigate both Pennsylvania and New Jersey regulatory environments. Key Responsibilities * Design and prepare detailed drawings for grading, drainage, utilities, roadways, and stormwater management systems. * Conduct site assessments and prepare feasibility studies and engineering reports. * Assist with local, state, and federal permitting processes in Pennsylvania and New Jersey. * Develop construction documents, technical specifications, and cost estimates. * Perform hydrologic and hydraulic modeling for stormwater systems. * Coordinate with project teams, clients, municipal officials, and regulatory agencies. * Support construction-phase services including RFIs, submittal reviews, field inspections, and punch lists. * Ensure all designs meet applicable codes and regulations for both Pennsylvania and New Jersey jurisdictions. Qualifications * Bachelor’s degree in Civil Engineering (required) * EIT certification (required); PE license (preferred or ability to obtain within 1–2 years) * 3+ years of civil engineering experience (land development, site engineering, or municipal projects preferred) * Proficient with AutoCAD Civil 3D (required) * Familiarity with civil engineering software * Strong communication and teamwork skills * Ability to prioritize multiple projects and meet tight deadlines * Valid driver’s license and reliable transportation to project sites in PA and NJ Benefits * Competitive Salary, Commensurate with Experience * Medical, Dental, and Vision Insurance * 401(k) Plan * Paid Time Off, Sick Leave, and Holidays * Professional Development Support

Job DescriptionThe Project Manager will be in charge of supervising the development of complex projects while observing pre-determined conditions (cost, quality, safety, timelines). The Project Manager will participate in defining the project's specifications, planning its implementation and drawing up its budget. They will be involved with both technical and financial aspects and coordinate the work of the various participants involved. Ensure that the development methods, timelines and costs are observed during each phase of the process. Serves as a primary contact for our clients and is responsible for ensuring that the contracted services are provided in a timely and professional manner. Has overall responsibility for all aspects of, and the success of, all assigned projects. Responsibilities: • As the project progresses the project manager will be responsible for identifying unanticipated tasks that can increase the cost of the project or delay meeting the assigned schedule., • The project manager will monitor the progress of the project; Interprets, organizes, executes, and coordinates assignments., • The project manager will establish the project budget, track the actual project expenditures against the forecast expenditures and will implement corrective action as needed. The project manager will prepare cost to complete estimates to determine whether the project can be completed within the assigned budget., • The project manager will be responsible for assuring that all internal project quality assurance procedures are followed., • Applies a thorough knowledge of current principles and practices of engineering as related to the variety of aspects affecting the firm., • Supervises a staff of engineers and technicians., • Plans, schedules, or coordinates the preparation of documents or activities for multiple major projects., • Responsibilities may include marketing, budgeting, financial managements, schedule coordination and resources allocation., • Performs preliminary engineering design and/or reviews the design and drafting work of staff or project engineers, CAD operators., • Coordinates work with other engineers and professionals within and outside own discipline, and with support services staff., • Assisting in company-wide business development in all disciplines of the firm’s practice.Qualifications:, • Master’s degree in engineering from an accredited college or university., • Registered Professional Engineer in New Jersey or New York., • Possess 8+ years of engineering management experience., • Proven ability to identify, develop and mentor talent., • Excellent listening, written and oral communication skills., • Effectively manage projects from concept through completion., • Proven leadership and decision-making skills., • Strong attention to detail with excellent analytical and judgment capabilities., • Establish a vision and create an environment for excellence., • Demonstrated record of ethics and high standards.Strong technical writing, communication skills and interpersonal skills are expected at this level, proven through technical presentations, technical papers and/or participation in technical committees. We offer employees competitive compensation packages; benefits packages; life insurance, short/long term disability insurance; and 401K retirement plan with company match. YU & Associates' is an Equal Employment Opportunity employer fully committed to providing equal opportunity in all areas of employment practices. No employee or applicant for employment is discriminated against because of race, creed, color, religion, gender, gender identity or expression, sexual or affectional preference, sexual orientation, sex, ancestry or national origin, citizenship status, age, disability, marital or domestic status, veteran status, atypical hereditary cellular or blood trait, genetic information or testing, or any other legally protected category in all employment decisions. We foster a work environment that’s inclusive as well as diverse, where our employees can be themselves. Every idea and perspective are valued to meet our common goals. YU & Associates is committed to supporting our employees’ well-being by providing benefits that are a valuable part of the compensation package. We partner with our employees to foster a healthy, safe and rewarding lifestyle both at work and at home. The Y&A benefits program for full-time employees include: · Benefits: • Medical-National plan with low out of pocket costs to members., • Dental-National plan., • Vision-National plan with the largest vision network., • Life/AD&D-Benefit available should an employee pass away while employed., • Short-Term Disability-Benefit in the event an employee is unable to work for a short period of time., • Long Term Disability-Benefit in the event an employee is unable to work for an extended period., • Employee Assistance Program-Employee 3rd party support available when needed., • ADP Retirement Plan with company match., • Bonus Program – based on individual and company performance., • Yearly review – based on individual and company performance.Tax Savings Tools:, • Healthcare Reimbursement Accounts-Tax Free benefit to employees., • Flexible Spending Accounts-Tax Deductible benefit for employees., • Dependent Care and Commuter Program-Tax Deductible benefit for employees.Value Adds:, • Will Preparation yRd4bApz2Q

Job Description A Great Opportunity for Growth within a Successful Company! Join one of the United States' most progressive and innovative construction, automation and engineering firms. EAD supports clients' projects on hundreds of systems in industrial manufacturing facilities specializing in food processing, pharmaceutical manufacturing and parcel handling. This opportunity will enable you to enjoy a fast-paced environment working on projects of all sizes and complexities. EAD is looking for a Staff Electrical Engineer to assist in providing engineering support for various industrial and commercial projects including: engineering calculations, power distribution, lighting design, controls design, and power analysis. Responsibilities • Prepare and modify drawings, specifications, calculations, charts and graphs, and monitor work for compliance to applicable codes, accepted engineering practices and EAD standards, • Electrical design with primary responsibilities of power, lighting and grounding per client requirements, • Provide studies of power quality, short circuit, coordination, and arc flash hazard analysis, • Development of capital expenditure cost estimates for design/build projects, • Coordinating with other internal team members on multi-discipline projects, which often includes architects, mechanical, process, civil and structural engineers, • Work with designers and drafters to produce detailed designs, • Resolve design and development problems, • Work with a team to deliver quality construction documentation – specifications, schematics, power and lighting plans, one-lines, etc., • Interface with clients, utility companies, construction administrators, project team and vendors, • Participate in discipline-specific and company-wide business development, • Perform and document technical design reviews with other disciplines on the project team to produce the highest level of quality, • Responsible for adhering to all EAD's safety standards and practices, • B.S. Degree in Electrical Engineering from an accredited institution, • 6 years' experience in electrical design of industrial and commercial projects, • Licensed Professional Engineer certification, • Knowledge of electrical engineering fundamentals, • Knowledge of the NEC, NFPA, and IEEE standards, • Possess organizational skills, • Excellent written and verbal communication skills with clients and in-house support staff, • Proficient with Excel spreadsheets, • Strong attention to detail, • Self-starter with strong attention to detail, • Possess and able to maintain a valid driver's license, • Office, plant, or client site environment*, • Ability to sit and work at computer for extended periods of time, • Ability to walk up numerous flights of stairs/ladders multiple times a day and/or work in tight spaces in extreme conditions, • May work near moving mechanical parts and equipment*, • Office, Commercial and/or Industrial setting with the potential of exposure to fumes or airborne particles, toxic or caustic chemicals*, • Ability to lift and/or move up to 50 lbs.*, • Periodic weekend, holiday or evening work as needed We strongly believe that diversity of experience, perspectives, and background will lead to a better workplace for our employees and a better product for our customers and members. EAD is an Equal Opportunity Employer

Job Description Our client in Fairfield, NJ is looking for an onsite, direct hire Manufacturing Industrial Engineer. Pay: $120k-$130k The ideal candidate will have an engineering background in mechanical engineering, industrial engineering, systems engineering, value engineering, or related engineering field with concentrated technical knowledge and previous experience in precision metals and plastics manufacturing and/or complex finished device assemblies. Responsibilities: • This role is fundamentally based on long-standing best practices in industrial engineering principles: identifying waste, defining value streams, productivity optimization, kanban setups, takt time studies, labor tracking, ergonomics, material flow, pFMEA, and similar Lean Six Sigma tools., • Support new business development with the purpose of generating accurate and detailed costing proposals that exceed customer expectations for quality, price, and delivery., • Bachelor's degree in Engineering (Mechanical, Industrial engineering, Systems engineering, Value engineering), • Minimum of 5 years of experience in value engineering, industrial engineering, manufacturing costing, or related role in the manufacturing industry, with specific experience utilizing industry 4.0 best practices and/or Lean, • Experience working for a Contract Manufacturer or OEM, • Strong engineering background with a solid understanding of manufacturing processes, materials, and equipment, • Ability to identify the best possible manufacturing processes, • Proficiency in using SolidWorks or equipment CAD/CAM software packages for estimating and DFM purposes, • Experience in product level design for manufacture (DFM), • Ability to collaborate across engineering Centers of Excellence for multi-plant vertically integrated proposals, • Excellent analytical and problem-solving skills, • Strong attention to detail and accuracy, • Effective communication and interpersonal skills, • Ability to work independently and as part of a cross-functional team, • Knowledge of industry standards and best practices in cost estimation

Job Description Cloud System Admin We are seeking a DevOps / SRE Engineer to design, build, and operate scalable AWS infrastructure with a strong emphasis on deployments, automation, and CI/CD. This role prioritizes enabling fast, reliable software delivery while maintaining high system availability and performance. You will work closely with development teams to streamline deployment pipelines, improve release velocity, and enforce infrastructure best practices. Responsibilities • Design, build, and manage AWS-based Linux infrastructure for scalable application deployments, • Own and optimize CI/CD pipelines to enable reliable, repeatable, and fast deployments, • Manage application releases, deployments, and rollback strategies across environments, • Automate infrastructure provisioning and application delivery using Infrastructure as Code, • Collaborate with development teams to improve build, test, and deployment workflows, • Troubleshoot deployment failures, pipeline issues, and production incidents, • Implement blue/green, canary, and rolling deployment strategies, • Maintain system reliability, monitoring, and alerting for production services, • Optimize performance, scalability, and cost of cloud infrastructure, • Enforce security best practices across infrastructure and deployment pipelines, • Maintain runbooks, deployment documentation, and operational procedures, • Participate in on-call rotation supporting production systems Required Skills • 5+ years of Linux system administration (RHEL, Ubuntu, Amazon Linux, Rocky/CentOS), • 3+ years of AWS experience (EC2, VPC, IAM, S3, EKS, ALB/NLB, CloudWatch), • Strong experience building and managing CI/CD pipelines (GitHub Actions, GitLab CI, Jenkins), • Hands-on experience with application deployments in cloud environments, • Proficiency in Bash and Python for automation, • Strong experience with Infrastructure as Code (Terraform preferred, CloudFormation acceptable), • Experience with containerization (Docker) and orchestration (Kubernetes/EKS), • Solid understanding of networking (TCP/IP, DNS, load balancing, firewalls), • Familiarity with observability tools (Prometheus, Grafana, ELK/OpenSearch, Datadog), • Experience implementing deployment strategies (blue/green, canary, rolling updates), • Strong focus on automation, deployment efficiency, and developer enablement, • Comfortable working in fast-paced environments with frequent releases, • Collaborative mindset with strong communication across DevOps and engineering teams, • Benefits are offered such as medical/dental/vision insurance and vacation time. 401k will be obtained as a benefit after 1 full year of service., • You will be placed at our Fair Lawn, NJ office, Please do not apply if you are not local or are not willing to relocate. I1Diud668z

Job Description We are seeking a DevOps / SRE Engineer to design, build, and operate scalable AWS infrastructure with a strong emphasis on deployments, automation, and CI/CD. This role prioritizes enabling fast, reliable software delivery while maintaining high system availability and performance. You will work closely with development teams to streamline deployment pipelines, improve release velocity, and enforce infrastructure best practices. Responsibilities • Design, build, and manage AWS-based Linux infrastructure for scalable application deployments, • Own and optimize CI/CD pipelines to enable reliable, repeatable, and fast deployments, • Manage application releases, deployments, and rollback strategies across environments, • Automate infrastructure provisioning and application delivery using Infrastructure as Code, • Collaborate with development teams to improve build, test, and deployment workflows, • Troubleshoot deployment failures, pipeline issues, and production incidents, • Implement blue/green, canary, and rolling deployment strategies, • Maintain system reliability, monitoring, and alerting for production services, • Optimize performance, scalability, and cost of cloud infrastructure, • Enforce security best practices across infrastructure and deployment pipelines, • Maintain runbooks, deployment documentation, and operational procedures, • Participate in on-call rotation supporting production systems Required Skills • 5+ years of Linux system administration (RHEL, Ubuntu, Amazon Linux, Rocky/CentOS), • 3+ years of AWS experience (EC2, VPC, IAM, S3, EKS, ALB/NLB, CloudWatch), • Strong experience building and managing CI/CD pipelines (GitHub Actions, GitLab CI, Jenkins), • Hands-on experience with application deployments in cloud environments, • Proficiency in Bash and Python for automation, • Strong experience with Infrastructure as Code (Terraform preferred, CloudFormation acceptable), • Experience with containerization (Docker) and orchestration (Kubernetes/EKS), • Solid understanding of networking (TCP/IP, DNS, load balancing, firewalls), • Familiarity with observability tools (Prometheus, Grafana, ELK/OpenSearch, Datadog), • Experience implementing deployment strategies (blue/green, canary, rolling updates), • Strong focus on automation, deployment efficiency, and developer enablement, • Comfortable working in fast-paced environments with frequent releases, • Collaborative mindset with strong communication across DevOps and engineering teams, • Ownership-driven with a focus on continuous improvement and operational excellence

Job Description About CP Engineers With over forty years of experience, CP Engineers delivers innovative solutions in site/civil, water/wastewater, municipal, MEP, and environmental engineering. Our project portfolio spans private, municipal, county, and regional clients—many of whom have partnered with us for decades. Remote work flexibility, competitive compensation and benefits, and a supportive culture have resulted in high employee satisfaction and retention and helped us win Best Places to Work awards three years in a row. Position Overview CP is experiencing exciting, sustained growth and is looking for a talented Water Resources Design Engineer to join our dynamic Water Resources practice. This role offers the opportunity to work on meaningful water and wastewater infrastructure projects, including treatment facilities, pumping stations, storage facilities, and distribution and collection systems. The ideal candidate will thrive in a collaborative environment, take pride in delivering high-quality design solutions, and play a key role in shaping projects that make a lasting impact—while ensuring compliance with industry standards and regulatory requirements. Compensation range: $120,000-$150,000 Key Responsibilities • Design & Engineering: Plan and design of water and wastewater treatment facilities, pumping stations, storage facilities, and distribution and collection systems in accordance with AWWA, ASCE, NSF/ANSI standards, and applicable regulations, including the Clean Water Act (CWA) and Safe Drinking Water Act (SDWA). Designs will thoughtfully integrate and consider client needs, operability, and constructability., • Feasibility & Planning Studies: Perform feasibility studies for water resources projects, incorporating hydraulic process and environmental evaluations and analyses in accordance with EPA and NJDEP guidelines to develop optimized, cost-effective solutions for clients., • Technical Documentation & Deliverables: Prepare engineering calculations, engineering reports, technical specifications, cost estimates, and contract documents that conform to NJDEP regulations, NPDES permitting criteria, and other applicable federal, state, and local regulations., • Site Investigations: Conduct site inspections and field assessments to support design and construction phase efforts to ensure designs are implemented in compliance with NJDEP, EPA, and local environmental standards and other applicable federal, state, and local regulations., • Regulatory Coordination & Compliance: Lead and support regulatory permitting efforts, ensuring full compliance with local, state, and federal requirements, including NJPDES permits, Treatment Works Approvals, and the Bureau of Water System Engineering., • Cross-Disciplinary Collaboration: Coordinate and Collaborate with internal multidisciplinary teams (Structural, Civil, MEP) as well as vendors and subcontractors to deliver integrated, high-quality project solutions., • Project Delivery & Growth Support: Manage technical scope, budgets, and schedules in a fast-paced environment, contributing to CP’s continued growth and expanding project portfolio. Demonstrated experience and understanding of maintaining fast-paced project budgets and schedules., • Mentorship & Team Development: Mentor and support junior engineering staff, sharing technical expertise, regulatory knowledge, and design procedures to strengthen the Water Resources Practice., • Sustainability & Best Practices: Incorporate energy and water efficiency measures, life cycle cost analysis, and sustainable design principles as recommended by EPA and national water resources planning guidelines Discover the opportunity to drive innovative water resources solutions with CP Engineers—where your expertise will shape communities, protect the environment, and ensure public health. If you’re passionate about making a meaningful impact and advancing industry standards, we invite you to join our team and be part of something extraordinary. Apply now and become a catalyst for positive change! Requirements • Bachelor’s degree in Civil or Environmental Engineering or related field, • 6+ years of experience in water resources engineering, • PE License or on track to obtain within reasonable amount of time, • Strong knowledge of NJDEP regulations, permitting processes, and relevant federal standards (EPA, CWA, SDWA), • Experience with AutoCAD and technical report writing, • Excellent analytical, problem-solving, and technical writing skills, • 401(k) match, • Hybrid/remote work flexibility, • Flexible hours, • 15 days paid time off, • Tuition, professional license, and association fee reimbursement, • Medical, dental, and vision coverage, • Support for employee work/life balance, • Training and development opportunities

Job DescriptionYU & Associates, Inc., an awarding winning engineering firm located in Elmwood Park, New Jersey is seeking a Utility Project Manager to join our team. As a Project Manager specializing in utilities engineering, you will be responsible for leading and overseeing projects related to utility design, coordination, and construction. Requirements: • Manage and supervise utilities engineering projects, including water, sewer, gas, electric, and telecommunications infrastructure. Serve as the main point of contact for clients, maintaining strong relationships and ensuring effective communication throughout the project lifecycle., • Lead and mentor a multidisciplinary project team, providing technical guidance and ensuring project objectives are met., • Develop comprehensive project plans, including scope, budget, schedule, and resource allocation., • Coordinate with internal and external stakeholders, such as utility companies, regulatory agencies, and subcontractors, to ensure seamless project execution and compliance with regulations., • Conduct thorough reviews of utility designs, ensuring constructability, efficiency, and adherence to industry standards and best practices including ASCE SUE standards, • Prepare and review project deliverables, including design plans, specifications, reports, and cost estimates., • Monitor project progress, identify potential risks and challenges, and implement effective mitigation strategies., • Prepare comprehensive technical reports or the presentation of complex data, findings, or analyses., • Coordinate complex multi-disciplinary projects., • Perform additional responsibilities as required by business needs., • Participate in project or pursuit meetings, including those onsite when necessary., • Support and participate in the development and mentorship of staff., • Stay updated on emerging trends, technologies, and regulations in the utilities engineering field. Qualifications: • Bachelor's degree in Civil Engineering or a related field. A master's degree is a plus. Professional Engineer License in New York and/or New Jersey is required, or ability to obtain within 6 months., • Minimum of 8 years of experience in utilities engineering, with a focus on project management. YU & Associates' is an Equal Employment Opportunity employer fully committed to providing equal opportunity in all areas of employment practices. No employee or applicant for employment is discriminated against because of race, creed, color, religion, gender, gender identity or expression, sexual or affectional preference, sexual orientation, sex, ancestry or national origin, citizenship status, age, disability, marital or domestic status, veteran status, atypical hereditary cellular or blood trait, genetic information or testing, or any other legally protected category in all employment decisions. We foster a work environment that’s inclusive as well as diverse, where our employees can be themselves. Every idea and perspective are valued to meet our common goals. YU & Associates is committed to supporting our employees’ well-being by providing benefits that are a valuable part of the compensation package. We partner with our employees to foster a healthy, safe and rewarding lifestyle both at work and at home. The Y&A benefits program for full-time employees include: · Benefits: • Medical-National plan with low out of pocket costs to members., • Dental-National plan., • Vision-National plan with the largest vision network., • Life/AD&D-Benefit available should an employee pass away while employed., • Short-Term Disability-Benefit in the event an employee is unable to work for a short period of time., • Long Term Disability-Benefit in the event an employee is unable to work for an extended period., • Employee Assistance Program-Employee 3rd party support available when needed., • ADP Retirement Plan with company match., • Bonus Program – based on individual and company performance., • Yearly review – based on individual and company performance.Tax Savings Tools:, • Healthcare Reimbursement Accounts-Tax Free benefit to employees., • Flexible Spending Accounts-Tax Deductible benefit for employees., • Dependent Care and Commuter Program-Tax Deductible benefit for employees.Value Adds:, • Will Preparation, • Beneficiary Grief Support SALARY RANGE: $130,000 - $150,000 Powered by JazzHR i8eKt9YC6i

Job DescriptionCoreWeave is The Essential Cloud for AI™. Built for pioneers by pioneers, CoreWeave delivers a platform of technology, tools, and teams that enables innovators to build and scale AI with confidence. Trusted by leading AI labs, startups, and global enterprises, CoreWeave combines superior infrastructure performance with deep technical expertise to accelerate breakthroughs and turn compute into capability. Founded in 2017, CoreWeave became a publicly traded company (Nasdaq: CRWV) in March 2025. Learn more at You'll Do The Data Center Planning & Construction team at CoreWeave is responsible for delivering a rapidly growing portfolio of data centers and critical infrastructure projects that power our AI cloud platform. We own the full project lifecycle—from site due diligence and design through construction, commissioning, and turnover—while partnering closely with Finance, Operations, and Executive Leadership to scale our footprint responsibly. The Construction Cost Engineer will be the owner-side commercial lead across a portfolio of complex, large-scale developments, with a focus on data centers and mission-critical infrastructure. You will build and maintain the financial "source of truth" for your projects, ensuring clarity, accountability, and control over every dollar from pre-construction through closeout. About the role: As a Construction Cost Engineer, you are responsible for the financial integrity of CoreWeave's physical build-outs. You will manage capital expenditure (CAPEX) for large-scale data center projects, ensuring our ambitious AI infrastructure deployment timelines are met without budget overruns. You will act as the "financial conscience" for our Project Managers and General Contractors. In this role, you will: • Own portfolio-level cost planning, control, and forecasting across multiple concurrent projects., • Serve as a strategic advisor to Construction, Real Estate, and Finance leadership on budget, risk, and commercial strategy., • Implement scalable tools, processes, and reporting that support CoreWeave's rapid growth and evolving data center program., • Partner with internal and external teams to anticipate risk, drive value, and protect the company's capital while enabling speed.=Who You Are:, • Cost Planning, Budgeting & Forecasting, • Develop and manage project and program-level budgets, cost plans, and capital forecasts for data center and infrastructure projects., • Build and maintain cost models and benchmarks across markets, asset types, and delivery models., • Own Anticipated Final Cost (AFC) and Estimate at Completion (EAC) forecasting; identify variances and risks early with clear mitigation plans., • Cost Control & Financial Management, • Lead end-to-end cost control for multiple projects, including tracking commitments, accruals, and actuals., • Monitor WIP, invoices, payment applications, and change events to ensure accuracy, compliance, and timeliness., • Prepare and present monthly cost reports and dashboards covering budget, forecast, exposure, contingency, and cash flow., • Implement and refine cost control systems, standards, and KPIs that can scale across the portfolio., • Change Management & Risk Analysis, • Review and validate, and negotiate change orders, claims, and potential change events from GCs, subs, and vendors., • Maintain contingency, exposure, and escalation tracking, including log management and drawdown strategy., • Partner with Construction, Design, and Operations to identify cost risks, model impacts, and recommend mitigation paths., • Lead or support post-mortem cost analyses, lessons learned, and audits to continuously improve cost performance., • Vendor & Consultant Management, • Manage and direct third-party QS/cost consultants and other commercial partners; ensure deliverables are on time, accurate, and actionable., • Review estimates, reconciliations, value engineering proposals, and cost reports for quality and alignment with CoreWeave standards., • Hold vendors accountable for scope, budget, and reporting expectations, and escalate issues as needed., • Data, Reporting & Continuous Improvement, • Build and maintain cost databases, historical benchmarks, and market intel to inform future projects and negotiations., • Analyze trends to identify value-engineering and cost-optimization opportunities without compromising performance or reliability., • Develop standardized tools, templates, and dashboards (e.g., for AFC, exposure, contingency, cash flow) to drive consistency., • Contribute to playbooks and best practices for project controls across the Construction & Data Center Planning organization., • 5+ years in or data center project controls., • Advanced MEP (Mechanical, Electrical, Plumbing) Estimating: Specific expertise in pricing high-density power systems and specialized cooling., • Ability to develop life-cycle cost models that include GPU depreciation, power usage effectiveness (PUE), and carbon offset costs., • Proficiency in using historical data to create "Cost per Megawatt" or "Cost per Rack" benchmarks specifically for AI workloads., • Expertise in validating "AI-driven design changes"—such as mid-project increases in floor loading for heavier GPU clusters or power-train upgrades., • Proficiency as a power user of construction management platforms (Procore, Autodesk Build, or e-Builder)., • Advanced proficiency in Microsoft Excel (including VBA/Power Query) required for synthesizing and analyzing large-scale vendor spreadsheets., • Quantity Surveying Expertise: The ability to perform quantity take-offs from construction drawings to accurately verify vendor quotes., • High-Velocity Performance: Ability to consistently process critical approvals and perform cost analyses with the speed required by CoreWeave's high-velocity operating schedule., • Effective Communication and Presentation Skills: Ability to translate complex cost data into clear, concise narratives and recommendations for diverse audiences., • Proven ability to influence and align cross-functional teams and senior stakeholders using data-driven insights, sound judgment, and structured thinking., • Deep knowledge of:, • Core construction cost drivers, including MEP systems, structure, envelope, and siteworks., • Estimating tools and workflows (e.g., CostX, Bluebeam, On-Screen Takeoff, Excel-based models)., • Project controls best practices, including change management, contingencies, escalation, and exposure tracking.Preferred:, • Professional certifications such as RICS, CCP, FRICS, PMP, or equivalent., • Familiarity with project management and collaboration tools (e.g., Primavera P6, MS Project, Procore, NetSuite, or similar)., • Experience building or contributing to cost databases, benchmarking frameworks, or standardized reporting suites., • You treat every dollar like it's your own, but you also know when speed and opportunity outweigh marginal savings., • You're curious about how things are built, not just what they cost, and you enjoy being close to the work in the field., • You're energized by building structure, tools, and standards that others rely on., • You love taking ownership of complex financial integrity and serving as the "financial conscience" for large construction projects., • You're curious about continuously analyzing data to find new cost efficiencies and develop better project benchmarks., • Be Curious at Your Core, • Act Like an Owner, • Empower Employees, • Deliver Best-in-Class Client Experiences The base salary range for this role is $134,000 to $179,000. The starting salary will be determined by job-related knowledge, skills, experience, and the market location. We strive for both market alignment and internal equity when determining compensation. In addition to base salary, our total rewards package includes a discretionary bonus, equity awards, and a comprehensive benefits program (all based on eligibility). What We Offer The range we've posted represents the typical compensation range for this role. To determine actual compensation, we review the market rate for each candidate which can include a variety of factors. These include qualifications, experience, interview performance, and location. In addition to a competitive salary, we offer a variety of benefits to support your needs, including: • Medical, dental, and vision insurance - 100% paid for by CoreWeave, • Company-paid Life Insurance, • Voluntary supplemental life insurance, • Short and long-term disability insurance, • Flexible Spending Account, • Health Savings Account, • Tuition Reimbursement, • Ability to Participate in Employee Stock Purchase Program (ESPP), • Mental Wellness Benefits through Spring Health, • Family-Forming support provided by Carrot, • Paid Parental Leave, • Flexible, full-service childcare support with Kinside, • 401(k) with a generous employer match, • Flexible PTO, • Catered lunch each day in our office and data center locations, • A casual work environment While we prioritize a hybrid work environment, remote work may be considered for candidates located more than 30 miles from an office, based on role requirements for specialized skill sets. New hires will be invited to attend onboarding at one of our hubs within their first month. Teams also gather quarterly to support collaboration. California Consumer Privacy Act - California applicants only CoreWeave is an equal opportunity employer, committed to fostering an inclusive and supportive workplace. All qualified applicants and candidates will receive consideration for employment without regard to race, color, religion, sex, disability, age, sexual orientation, gender identity, national origin, veteran status, or genetic information. As part of this commitment and consistent with the Americans with Disabilities Act (ADA), CoreWeave will ensure that qualified applicants and candidates with disabilities are provided reasonable accommodations for the hiring process, unless such accommodation would cause an undue hardship. If reasonable accommodation is needed, please contact: . Export Control Compliance This position requires access to export controlled information. To conform to U.S. Government export regulations applicable to that information, applicant must either be (A) a U.S. person, defined as a (i) U.S. citizen or national, (ii) U.S. lawful permanent resident (green card holder), (iii) refugee under 8 U.S.C. § 1157, or (iv) asylee under 8 U.S.C. § 1158, (B) eligible to access the export controlled information without a required export authorization, or (C) eligible and reasonably likely to obtain the required export authorization from the applicable U.S. government agency. CoreWeave may, for legitimate business reasons, decline to pursue any export licensing process.

Job Description AWS DevOps Engineer Locals only Min experience should be 10 years We are seeking a DevOps / SRE Engineer to design, build, and operate scalable AWS infrastructure with a strong emphasis on deployments, automation, and CI/CD. This role prioritizes enabling fast, reliable software delivery while maintaining high system availability and performance. You will work closely with development teams to streamline deployment pipelines, improve release velocity, and enforce infrastructure best practices. Responsibilities • Design, build, and manage AWS-based Linux infrastructure for scalable application deployments, • Own and optimize CI/CD pipelines to enable reliable, repeatable, and fast deployments, • Manage application releases, deployments, and rollback strategies across environments, • Automate infrastructure provisioning and application delivery using Infrastructure as Code, • Collaborate with development teams to improve build, test, and deployment workflows, • Troubleshoot deployment failures, pipeline issues, and production incidents, • Implement blue/green, canary, and rolling deployment strategies, • Maintain system reliability, monitoring, and alerting for production services, • Optimize performance, scalability, and cost of cloud infrastructure, • Enforce security best practices across infrastructure and deployment pipelines, • Maintain runbooks, deployment documentation, and operational procedures, • Participate in on-call rotation supporting production systems Required Skills • 5+ years of Linux system administration (RHEL, Ubuntu, Amazon Linux, Rocky/CentOS), • 3+ years of AWS experience (EC2, VPC, IAM, S3, EKS, ALB/NLB, CloudWatch), • Strong experience building and managing CI/CD pipelines (GitHub Actions, GitLab CI, Jenkins), • Hands-on experience with application deployments in cloud environments, • Proficiency in Bash and Python for automation, • Strong experience with Infrastructure as Code (Terraform preferred, CloudFormation acceptable), • Experience with containerization (Docker) and orchestration (Kubernetes/EKS), • Solid understanding of networking (TCP/IP, DNS, load balancing, firewalls), • Familiarity with observability tools (Prometheus, Grafana, ELK/OpenSearch, Datadog), • Experience implementing deployment strategies (blue/green, canary, rolling updates), • Strong focus on automation, deployment efficiency, and developer enablement, • Comfortable working in fast-paced environments with frequent releases, • Collaborative mindset with strong communication across DevOps and engineering teams, • Benefits are offered such as medical/dental/vision insurance and vacation time. 401k will be obtained as a benefit after 1 full year of service., • You will be placed at our Fair Lawn, NJ office, Please do not apply if you are not local or are not willing to relocate. Yc2tqWKrFD

Job DescriptionPosition Summary We are seeking a talented and motivated Junior to Mid-Level Civil Engineer to join our growing team. This role would be held near the Lincoln Park, NJ office and offers the opportunity to engage in a variety of municipal, public, and private sector projects, including land development, transportation improvements, utility infrastructure, and municipal engineering. The ideal candidate will have a strong background in site design, permitting processes, and civil infrastructure development, with the flexibility to navigate both Pennsylvania and New Jersey regulatory environments. Key Responsibilities * Design and prepare detailed drawings for grading, drainage, utilities, roadways, and stormwater management systems. * Conduct site assessments and prepare feasibility studies and engineering reports. * Assist with local, state, and federal permitting processes in Pennsylvania and New Jersey. * Develop construction documents, technical specifications, and cost estimates. * Perform hydrologic and hydraulic modeling for stormwater systems. * Coordinate with project teams, clients, municipal officials, and regulatory agencies. * Support construction-phase services including RFIs, submittal reviews, field inspections, and punch lists. * Ensure all designs meet applicable codes and regulations for both Pennsylvania and New Jersey jurisdictions. Qualifications * Bachelor’s degree in Civil Engineering (required) * EIT certification (required); PE license (preferred or ability to obtain within 1–2 years) * 3+ years of civil engineering experience (land development, site engineering, or municipal projects preferred) * Proficient with AutoCAD Civil 3D (required) * Familiarity with civil engineering software * Strong communication and teamwork skills * Ability to prioritize multiple projects and meet tight deadlines * Valid driver’s license and reliable transportation to project sites in PA and NJ Benefits * Competitive Salary, Commensurate with Experience * Medical, Dental, and Vision Insurance * 401(k) Plan * Paid Time Off, Sick Leave, and Holidays * Professional Development Support

Job Description A Great Opportunity for Growth within a Successful Company! Join one of the United States' most progressive and innovative construction, automation and engineering firms. EAD supports clients' projects on hundreds of systems in industrial manufacturing facilities specializing in food processing, pharmaceutical manufacturing and parcel handling. This opportunity will enable you to enjoy a fast-paced environment working on projects of all sizes and complexities. EAD is looking for an Associate Electrical Engineer to assist in providing engineering support for various industrial and commercial projects including: engineering calculations, power distribution, lighting design, controls design, and power analysis. Responsibilities • Prepare and modify drawings, specifications, calculations, charts and graphs, and monitor work for compliance to applicable codes, accepted engineering practices and EAD standards, • Electrical design with primary responsibilities of power, lighting and grounding per client requirements, • Provide studies of power quality, short circuit, coordination, and arc flash hazard analysis, • Development of capital expenditure cost estimates for design/build projects, • Coordinating with other internal team members on multi-discipline projects, which often includes architects, mechanical, process, civil and structural engineers, • Work with designers and drafters to produce detailed designs, • Resolve design and development problems, • Work with a team to deliver quality construction documentation – specifications, schematics, power and lighting plans, one-lines, etc., • Interface with clients, utility companies, construction administrators, project team and vendors, • Participate in discipline-specific and company-wide business development, • Perform and document technical design reviews with other disciplines on the project team to produce the highest level of quality, • Responsible for adhering to all EAD's safety standards and practices, • B.S. Degree in Electrical Engineering from an accredited institution, • 3 years' experience in electrical design of industrial and commercial projects, • P.E., F.E. or commitment to obtain F.E. within first 12 months required with desire to obtain Licensed Professional Engineer certification, • Knowledge of electrical engineering fundamentals, • Possess organizational skills, • Excellent written and verbal communication skills with clients and in-house support staff, • Proficient with Excel spreadsheets, • Strong attention to detail, • Self-starter with strong attention to detail, • Possess and able to maintain a valid driver's license, • Office, plant, or client site environment*, • Ability to sit and work at computer for extended periods of time, • Ability to walk up numerous flights of stairs/ladders multiple times a day and/or work in tight spaces in extreme conditions, • May work near moving mechanical parts and equipment*, • Office, Commercial and/or Industrial setting with the potential of exposure to fumes or airborne particles, toxic or caustic chemicals*, • Ability to lift and/or move up to 50 lbs.*, • Periodic weekend, holiday or evening work as needed We strongly believe that diversity of experience, perspectives, and background will lead to a better workplace for our employees and a better product for our customers and members. EAD is an Equal Opportunity Employer

Job Description Join a well-estalbished, fast-growing company recognized for providing solutions, excellence, service, and integrity. We seek dynamic individuals to support organic growth. SESI engages its employees in all aspects of its projects and encourages them to participate in design and project management functions to their full potential. SESI Consulting Engineers has been selected as one of NJBIZ’s 2020 Fifty "FASTEST GROWING" Companies! SESI Consulting Engineers, founded in 1976, is a well-established, progressive, consulting engineering firm in Pine Brook, N.J. SESI has earned an excellent reputation for providing innovative geotechnical, site/civil, and environmental engineering solutions for owners, developers, and the construction industry in the NJ, NY, CT region. SESI is currently expanding to meet the needs of existing clients. We offer a competitive compensation and benefit package to include health, dental, vision insurance, retirement plan, paid time off, tuition reimbursement, professional development assistance, bonus potential, just to name a few. Summary SESI seeks an Assistant Project Engineer to work in its Site/Civil Department. This individual will serve a key function in helping design commercial, residential, mixed-use, and industrial developments. In this role, you will have the opportunity to work in a dynamic, collaborative environment. Essential Duties and Responsibilities include the following. Other duties may be assigned. · Prepare and update various engineering documents such as reports, specifications, plans, construction schedules, cost estimates and design plans for projects using AutoCAD Civil 3D and associated software packages. · Use reports, maps, drawings, engineering plans, tests, and aerial photographs to assess soil composition, terrain, hydrological characteristics, and topographical and geologic data and their impact on the planning and design of projects. · Familiarity with current local, state (New Jersey and New York), and Federal Permitting regulations · Must be willing to work in the field as necessary; · Position requires work Monday through Friday with occasional evenings and weekends; and Performs other duties as requested Supervisory Responsibilities This job has some supervisory responsibilities. Qualifications - To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Ability to review and understand plans, specs, and reports including site, grading, utility, foundation, details, structural, drawings, architectural, grading, federal, state and local regulations. Education and/or Experience · Bachelor of Science in Civil Engineering; · 4-8 years of prior relevant professional experience in site/civil design, including site planning, grading, stormwater management, and erosion control measures; · Excellent written and verbal communication skills; · Proficient in AutoCAD and Civil 3D; · Strong attention to detail with excellent analytical, multitasking, and judgment capabilities; · Reliable transportation to access job sites with a valid driver’s license in good standing; and · Demonstrated ability to follow direction and work in a collaborative team environment Certificates, Licenses, Registrations · FE/EIT certification required; PE desired; · Valid Driver’s License and possess reliable transportation to access job sites Language Skills Proficient in communicating both verbal and written in the English language. Proficient in communicating both verbal and written in the English language. Ability to read, analyze, and interpret common scientific and technical journals, financial reports, and legal documents. Ability to respond to common inquiries or complaints from customers, regulatory agencies, or members of the business community. Ability to write speeches and articles for publication that conform to prescribed style and format. Ability to effectively present information to top management, public groups, and/or boards of directors. Mathematical Skills Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations. Reasoning Ability Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. Computer Skills Proficient or familiarity with AutoCAD, Autodesk Civil 3D, NitroPro, GSLOPE, KeyWall, Rocscience, MS Word, Excel, Adobe. Tools/Equipment Position requires ability to use tools such as a lump hammer, shovel, hand auger, Nuclear Density Gauge. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is frequently required to stand; walk; sit; use hands to finger, handle, or feel; reach with hands and arms; climb or balance; talk or hear and taste or smell. The employee must frequently lift and/or move under 50 pounds. The employee is frequently required to use hands or fingers to handle or feel objects, tools, or controls. Specific vision abilities required by this position include close vision, distance vision, and the ability to adjust focus. The noise level in the work environment is usually low to moderate. Work Environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The majority of work will be conducted in an office setting. Approximately 25% of the work is conducted outdoors. Worker must be able to walk frequently on uneven hard and soft ground/terrain in all types of weather conditions to include cold, hot rain, snow, ice, etc. Employees working in the field may also be exposed to sun, wind, insects, plants, animals, etc. As a result, appropriate clothing for outdoor work, work boots, safety glasses, hard hat, safety vest is required while working in the field. Base salary $75,000–$95,000, + mileage reimbursement, benefits, paid time off, tuition reimbursement, professional development opportunities, 401(k), and bonus potential.

Job DescriptionThis is a temporary 6-month contracted W2 position. The pay range for this position is $70-$85/hr (depending on prior experience) Job Functions: • Applies expertise as an emerging authority in the mechanical engineering discipline., • Conceives and develops solutions to difficult analytical and pneumatic/mechanical/electrical design problems., • Participates in establishing system or component design objectives and writes portions of complex specifications and engineering reports., • Reviews and helps to develop product specifications, • Conducts conceptual design studies using MCAD and other applicable design tools. Collaborates with other engineering functions, • Develops prototype hardware using internal manufacturing resources and outside vendors, • Tests product to verify that designs meet specification requirements such as environmental, regulatory and safety requirements, • Generates documentation supporting the design, • Design for Manufacturability and Assembly, DFM&A (cost/tooling/process considerations), preferably using SolidWorks CAD software., • Understanding in design and development of injection molded plastic, plastic extrusion, casting, sheet metal, metal stampings, additive manufacturing processes, and machined metal components, and assemblies with high part counts highly desirable., • Knowledge of mechanical design and development using metric ANSI/ISO dimensioning and drafting standards highly desirable., • Understanding of GD&T, mechanical measurement and testing equip., and statistical analysis of test data., • Experience with electronic document control systems in medical device and/or medical equipment design and development., • Highly skilled at analytical reasoning, mechanism design, creative problem solving, and mathematical analysis., • Ability to create and meet scheduled timelines (manage and coordinate tasks as required)., • Ability to work in a team environment., • Strong communication skills., • Familiarity with dimensioning and tolerance, thermal and structural analysis, and vibration testing/analysis, • Intermediate knowledge of FDA, IEC and UL standards relating to medical electronic equipment, • Strong technical and analytical ability, verbal and written communication skills, ingenuity and creativity, interpersonal and project management skills, • Ability to operate test equipment such as various pressure and flow measurement equipment, temperature/humidity chambers, PC-based data recorders, simulators, DVM’s and oscilloscopes, • BSME or MSME and a minimum of 10 years of related experience in design/product development of electro pneumatic assemblies including technical supervision of sub-projects, • Formal training in basic and advanced topics in Solid Works is strongly preferred, • Proficiency with Microsoft Windows, MS Office applications, and Adobe Acrobat, • Advanced proficiency with SolidWorks, MCAD/CAE software and database management software preferred, • Advanced proficiency with Microsoft Visio and Microsoft Project preferred Important Notice: Protecting Your Information Medvacon Talent Acquisition only conducts initial video interviews via Microsoft Teams or Zoom. All communication will come from an email address ending in @medvacon.com. If you receive a message that seems suspicious or is not from our official domain, please report it immediately to . Powered by JazzHR QpHnpP1sVI

Job DescriptionYU & Associates is seeking a Geotechnical Project Manager in our Elmwood Park, New Jersey Office. You will be responsible for planning, scheduling and execute common to complex projects establishing techniques and standards for analysis and design, coordinating with senior level management, performing mathematical calculations, and training subordinates. The candidate will be managing within an integrated multidiscipline environment and be further responsible for reviewing and certifying the work of staff, performance, managing billings, and maintain strong billability. Duties & Responsibilities: • Perform and oversee engineering calculations and design drawings related to geotechnical work., • Focus on public/private development with regulatory permitting expertise in NJ and PA., • Demonstrated ability to supervise and review others work., • Prepare proposals for professional services., • Perform and direct others with geotechnical inspections, site reconnaissance, soil borings, and field investigations., • Review proposed contracts to determine significant parameters, time schedules and mileposts and define the major task areas., • Resolve problems and coordinate the final turnover of the project to the client, as the primary contact with the client throughout the entire project., • Direct the planning and development of the project scope, procedures, and budget., • Ensure contractual commitments are met and the work is being performed according to the client's instructions., • Maintain effective relationships with members of all divisions and departments responsible for performing services in connection with the project., • Control and/or review all project forecasts, schedules, cost estimates and reports. Responsible for quality control over the complete project; maintain project files., • Monitor fees and budgets; report problems to the appropriate department and division managers., • Review and address health & safety concerns on projects assigned., • Work with the accounting department to keep billings and receipts current and accurate., • Perform other duties as assigned.Requirements:, • B.S. degree in Civil Engineering and M.S. degree with geotechnical specialty (preferred)., • Registered Professional Engineer in New Jersey and/or New York., • Possess 10+ years of geotechnical related regional experience., • Demonstrated ability to develop diverse clients and grow a business., • Proven ability to identify, develop and mentor talent., • Effectively manage projects from concept through completion., • Proven leadership and decision-making skills., • Strong attention to detail with excellent analytical and judgment capabilities., • Excellent communication, interpersonal, report writing, and project management skills., • Excellent listening, written and oral communication skills., • Working knowledge of computers and related geotechnical design software., • Possess a valid driver’s license in good standing., • Ability to establish a vision and create an environment for excellence., • Demonstrated record of ethics and high standards.We offer employees competitive compensation packages, medical/dental/vision, life insurance, short, and long-term disability, paid holidays, paid time off, and 401k retirement plan with company match. YU & Associates' is an Equal Employment Opportunity employer fully committed to providing equal opportunity in all areas of employment practices. No employee or applicant for employment is discriminated against because of race, creed, color, religion, gender, gender identity or expression, sexual or affectional preference, sexual orientation, sex, ancestry or national origin, citizenship status, age, disability, marital or domestic status, veteran status, atypical hereditary cellular or blood trait, genetic information or testing, or any other legally protected category in all employment decisions. We foster a work environment that’s inclusive as well as diverse, where our employees can be themselves. Every idea and perspective are valued to meet our common goals. YU & Associates is committed to supporting our employees’ well-being by providing benefits that are a valuable part of the compensation package. We partner with our employees to foster a healthy, safe and rewarding lifestyle both at work and at home. The Y&A benefits program for full-time employees include: · Benefits: • Medical-National plan with low out of pocket costs to members., • Dental-National plan., • Vision-National plan with the largest vision network., • Life/AD&D-Benefit available should an employee pass away while employed., • Short-Term Disability-Benefit in the event an employee is unable to work for a short period of time., • Long Term Disability-Benefit in the event an employee is unable to work for an extended period., • Employee Assistance Program-Employee 3rd party support available when needed., • ADP Retirement Plan with company match., • Bonus Program – based on individual and company performance., • Yearly review – based on individual and company performance.Tax Savings Tools:, • Healthcare Reimbursement Accounts-Tax Free benefit to employees., • Flexible Spending Accounts-Tax Deductible benefit for employees., • Dependent Care and Commuter Program-Tax Deductible benefit for employees.Value Adds:, • Will Preparation Powered by JazzHR PfGlhljg4P

Job DescriptionYU & Associates, Inc., an awarding winning engineering firm located in Elmwood Park, New Jersey is seeking a Supervising Project Engineer to join our team. The successful candidate will manage aspects of important projects including proposal development, budget, project execution, scheduling and client communications. Participates in conducting engineering investigations and planning work by completing well-defined tasks. These tasks may include collection and analysis of data using established procedures, performance of routine calculations, and participation in evaluating the feasibility of alternate solutions. Requirements/Responsibilities • Bachelor's degree in civil engineering (master's preferred) and a Registered Professional Engineer in the State of New York required., • Minimum of 5 years of experience., • Demonstrated ability to manage multi-discipline projects and utilize technical support staff., • Ability to develop and maintain strong relationships with clients, must possess the desire to develop new clients and expand the services of existing clients while maintaining strong billability., • Record and report all work performed, including deviations from approved work plans, contract documents, poor quality of work, unforeseen conditions, unsafe conditions, etc.;, • Interface with Senior Inspector to maintain and track various logs, reports and field records for the designated area of responsibility., • Monitor the contractor’s timely execution and quality of work., • Interact with contractor’s superintendent for on-site resolution of construction issues., • Review and proof contractor submittals and respond to RFIs., • Prepare proposal cost estimates, technical approach and scope of work write-ups., • Perform review of responses to RFPs for project subcontracts, materials and equipment., • Prepare thorough documentation of site activities, monitor project schedules and subcontractor performance and correct issues when needed., • Assist with preparing project reports, correspondence and cost tracking/status., • Provide technical assistance to engineering oversight staff as required.Qualifications, • Experience in managing large field programs as a team leader is a plus., • Geotechnical analytical and design experience., • Technical report writing skills., • Project and safety management., • Field documentation skills., • Excellent reading, writing, and verbal communication skills., • Strong computer skills., • Field and office assignments, as required.We offer employees competitive compensation packages, medical/dental/vision, life insurance, short, and long-term disability, paid holidays, paid time off, and 401k retirement plan with company match. YU & Associates' is an Equal Employment Opportunity employer fully committed to providing equal opportunity in all areas of employment practices. No employee or applicant for employment is discriminated against because of race, creed, color, religion, gender, gender identity or expression, sexual or affectional preference, sexual orientation, sex, ancestry or national origin, citizenship status, age, disability, marital or domestic status, veteran status, atypical hereditary cellular or blood trait, genetic information or testing, or any other legally protected category in all employment decisions. We foster a work environment that’s inclusive as well as diverse, where our employees can be themselves. Every idea and perspective are valued to meet our common goals. YU & Associates is committed to supporting our employees’ well-being by providing benefits that are a valuable part of the compensation package. We partner with our employees to foster a healthy, safe and rewarding lifestyle both at work and at home. The Y&A benefits program for full-time employees include: · Benefits: • Medical-National plan with low out of pocket costs to members., • Dental-National plan., • Vision-National plan with the largest vision network., • Life/AD&D-Benefit available should an employee pass away while employed., • Short-Term Disability-Benefit in the event an employee is unable to work for a short period of time., • Long Term Disability-Benefit in the event an employee is unable to work for an extended period., • Employee Assistance Program-Employee 3rd party support available when needed., • ADP Retirement Plan with company match., • Bonus Program – based on individual and company performance., • Yearly review – based on individual and company performance.Tax Savings Tools:, • Healthcare Reimbursement Accounts-Tax Free benefit to employees., • Flexible Spending Accounts-Tax Deductible benefit for employees., • Dependent Care and Commuter Program-Tax Deductible benefit for employees.Value Adds:, • Will Preparation Powered by JazzHR 1ud1ZGwSEW

Job Description Snipebridge, a strategic talent solutions company specializing in connecting exceptional talent to great career opportunities in the Architecture & Planning industry, is seeking a Supervising Engineer -Water Resources. Our client is an ENR Top 500 Design firm focused on geotechnical, environmental, water, ecological, and construction management services that has been delivering exceptional services for more than six decades. Their multidisciplinary team tackles intricate projects in diverse industries such as transportation, energy, infrastructure, and development. The firms long-standing commitment to technical excellence and client satisfaction has fueled their growth and success. They offer a collaborative and dynamic work environment where talented individuals can thrive and contribute to impactful projects. Position Summary This key position demands strong client-facing skills alongside the ability to lead and mentor staff-level engineers. A critical aspect of the role involves partnering with the firms dams/levees/water resources Practice Leaders to actively develop and expand our market footprint within New Jersey, New York, and Pennsylvania. Primary Responsibilities: • Supervising and scheduling geotechnical and structural engineering staff and providing technical direction and oversight., • Senior project management of interdisciplinary teams of geotechnical, structural, hydrologic/hydraulic, and civil engineers; to include, scheduling and supervising project meetings, producing and managing project schedules and budgets., • Managing and reviewing the preparation of construction plans and technical specifications., • Supervising and reviewing dam and/or levee safety inspections., • Providing leadership/mentoring to technical staff., • Managing and tracking budgets, creating project invoicing and Client follow-up, • Communicating effectively and efficiently with team members, clients and contractors., • Interacting with clients and regulatory agencies., • Preparing technical and cost proposals., • Supervising fieldwork including test borings and instrumentation installations and construction monitoring for dam and levee rehabilitation projects., • Providing data analysis, organization, and interpretation in support of dam/levee inspections, evaluations, and rehabilitations projects., • Executing and/or supervising engineering analyses including seepage and slope stability analyses of embankment dams and levees, drainage and filter designs, gravity dam stability analyses., • Writing and/or reviewing field reports, inspection/engineering reports, and permit applications. Education/Skills/Experience: • B.S. in Civil Engineering or related field of practice is required. Master’s Degree with a Geotechnical focus is a plus., • Professional Engineer license in NJ with the ability to obtain PE in NY and PA., • 15 to 20 years of experience in civil – geotechnical engineering, with direct involvement in dam safety inspections, condition assessments, subsurface exploration programs, engineering analyses, dam rehabilitation design, and regulatory permitting., • Experience completing projects with public sector/municipal agencies in New Jersey, New York and Pennsylvania is highly preferred., • Proven experience with design and development of engineering technical specifications, cost estimating and other related bidding documents., • Strong interpersonal skills and ability to speak publicly., • Solid project financial management skills; knowledge of production support systems and personal computer proficiency are all required competencies., • Experience in providing technical and project leadership to staff-level or junior engineers., • A strong background using various geotechnical computer software such as SEEP/W, SLOPE/W, and finite element analysis software such as PLAXIS are preferred., • Knowledgeable of dam and levee safety guidelines utilized by the U.S. Army Corps of Engineers, Bureau of Reclamation, Federal Energy Regulatory Commission, Natural Resource Conservation Service, and other Federal agencies, as well as State Dam Safety agencies. All applicants must be legally authorized to work in the United States without sponsorship and must already possess long-term work authorization.

Elevate your career at Marotta Controls, a New Jersey Top Workplace three years running! Dedicated to innovation, quality and excellence, we deliver cutting edge control systems for the Aerospace & Defense industry. At Marotta, we value bold thinking and teamwork, and we empower our employees to push boundaries while delivering top-tier solutions to our customers. Our team fosters a fun, collaborative culture where creativity and technical excellence thrive! Your next big opportunity starts here. Be part of a company where your work supports a mission that makes a difference-apply today ! Manufacturing Engineer II - Turning (2nd Shift) POSITION PROFILE: This position is primarily responsible for creating, maintaining and optimizing CNC Programs (Milling & Turning Centers), Operation/Tool Sheets, Mfg. Routers and tool/fixture designs utilizing best practices to effectively support machine shop operations for Marotta Controls, Inc. Your knowledge/expertise should include both Gibbs or Mastercam, and PRO-E. This knowledge will be applied during the design phase of new products, redesign phase of existing products, equipment set-up activities, cost estimates, facility layout plans, root cause troubleshooting and continuous improvement initiatives. The incumbent must be a dynamic individual who can multi-task and oversee various activities associated with aerospace manufacturing ensuring that Mfg. Eng. activities are conducted in a manner that complies with company requirements (i.e. regulatory, safety, administrative, etc.). This position requires effective interaction with a broad spectrum of people both internal and external to the organization to successfully support operations and the corporate strategic vision. Minimum Required Qualifications: • 5 years of related experience in a machine shop manufacturing environment (Aerospace preferred, but not required), • 2 years of Gibbs and/or Mastercam & PRO- E usage, • High School or (GED) Diploma, Bachelor's degree in Mfg. Engineering or related field preferred, • Self-motivated individual who possess the ability to analyze, organize, plan, prioritize assignments, multi-task and achieve results through interaction with others, • Possess math skills required to design tools/fixtures and generate accurate, safe CNC Programs in an effective manner. Ability to interpret various types of graphs and data required for problem solving, SPC, etc., • Demonstrate effective verbal/written communication skills required for interacting with all levels of personnel both internal and external to the organization, • Secure external resources (subcontracted services) to maintain and ensure machine shop equipment is operational, • Knowledgeable/proficient in the areas of Lean Manufacturing concepts, employee training, development of equipment, operation, & training procedures/policies, effective application of mfg. methods, tool/fixture design, material selection, facility layout plans, cost estimates, DFM concepts, GT&D practices, machine shop documentation (operator./tooling sheets, routers, etc.), root cause investigations, trouble shooting, performance metrics and machine shop operational activities, • Must be computer literate. Demonstrate proficiency using Gibbs or Mastercam & PRO-E, CAD/CAM., • Ability to read, interpret documents (i.e. procedures, blueprints/technical drawings, etc.) and use necessary measuring devices/equipment to confirm tooling/fixturing geometries and dimensions, • Must be a US Citizen ESSENTIAL DUTIES / RESPONSIBILITIES: • Abide by all safety, quality, housekeeping and company policies/procedures to ensure compliance to various regulatory and internal system requirements, • All practices and activities related to Mfg. Eng. must be performed in a manner which supports commonality, standardization (where applicable), First Past Yield and utilization of safe/best industry practices, • Create, maintain and refine detailed mfg. documentation (i.e. Operation Sheets, Routers, Set-up/Tooling sheets, etc.) through effective selection of manufacturing methods (inclusive of inspection point selection), • Assist in securing external resources (subcontracted services) to maintain and ensure machine shop equipment is operational to achieve production efficiencies, and on-time customer shipments, • Generate, optimize, validate and maintain C.N.C. Programs for CNC MILLING and CNC TURNING CENTERS through the effective application of Gibbs & PRO-E CAD/CAM software, • Design efficient/safe tools and fixtures required to support machine shop operations, • Generate accurate estimates (i.e. set-up, cycle time, material, etc.) using cost effective mfg. methods, • Define, monitor and communicate the status of performance metrics to management. Implement appropriate actions to resolve identified issues, • Effectively communicate issues in a timely manner to all affected parties internal/external to the Marotta Organization, • Train and provide guidance to personnel required to support the goals and objectives associated with Mfg. Eng. and machine shop operations, • Foster a positive, cooperative and safe work environment through effective communication at all levels of the Marotta organization, • Actively participates in team meetings, root cause investigations, trouble shooting activities (as req'd), continuous improvement initiatives/programs, etc. to provide constructive recommendations and initiate actions to support company initiatives/goals/vision Work Environment : • While performing the duties of this job, the employee is frequently exposed to conditions typical of a manufacturing/machine shop environment, including, but not limited to: fluids, fumes or airborne particles, moving mechanical parts, noise and vibration, • This job interacts both in a professional office environment and a manufacturing/machine shop environment. This role uses standard office equipment such as computers, phones, photocopiers, filing cabinets and fax machines, as well as environments inclusive of the appropriate eye, hearing and foot protection (as required)., • Temperature of work environment may be affected by outside/external temperatures, machining processes, etc., • Overtime and weekend may be required, if job duties demand., • No travel is expected for this position Physical Requirements : • While performing the duties of this job, the employee is regularly required to talk and hear., • The employee is frequently required to reach with hands and arms, and to use hands to finger, handle or feel, • Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception and ability to adjust focus., • The employee is regularly required to stand at length (7-8 hours, daily), sit, walk, stoop, bend, turn, balance, and/or crouch, and move about the facility., • The employee may be required to lift and/or move items weighing up to 40 pounds, and occasionally up to 70 lbs. This position is at our Montville, NJ corporate offices location. Pay Range: $35.00 - 44.00/hour + shift differential Many of our contracts require proof that you are a U.S. citizen and/or that an export license has been obtained for employees who are citizens of certain countries. Your employment, both initially and continually thereafter, is conditioned on production of such proof of citizenship and/or any export license that may be required to comply with any and all applicable laws, regulations, or executive orders, or required by Federal, State, or local government contracts. At Marotta Controls, we are committed to a fair, performance-driven compensation approach that promotes consistency across all levels of our organization. We ensure that pay decisions are free from bias, based on objective criteria, and are regularly reviewed. Your level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, experience, and internal consistency. Additionally, we offer a highly competitive compensation package for this opportunity, including incentive compensation and a comprehensive suite of premium benefits. These include medical, prescription, dental, vision, life, and disability insurance, a 401(k) plan with company match, tuition assistance, paid vacation, sick and personal days, paid holidays, and flexible scheduling options such as compressed workweeks. We value and reward employee achievements and host multiple engagement events each quarter to foster a strong, supportive workplace culture. If you are looking to grow or accelerate your career and be part of a best in class organization while enjoying a work-life balance, please visit our website at to learn more about us and to apply. Check out all of our openings at VETERANS ARE ENCOURAGED TO APPLY No agencies, please. Pay Range: $30 - $36 per hour

Elevate your career at Marotta Controls, a New Jersey Top Workplace three years running! Dedicated to innovation, quality and excellence, we deliver cutting edge control systems for the Aerospace & Defense industry. At Marotta, we value bold thinking and teamwork, and we empower our employees to push boundaries while delivering top-tier solutions to our customers. Our team fosters a fun, collaborative culture where creativity and technical excellence thrive! Your next big opportunity starts here. Be part of a company where your work supports a mission that makes a difference-apply today ! Manufacturing Engineer II POSITION PROFILE: This position is primarily responsible for creating, maintaining and optimizing CNC Programs (Milling & Turning Centers), Operation/Tool Sheets, Mfg. Routers and tool/fixture designs utilizing best practices to effectively support machine shop operations for Marotta Controls, Inc. Your knowledge/expertise should include both Gibbs or Mastercam, and PRO-E. This knowledge will be applied during the design phase of new products, redesign phase of existing products, equipment set-up activities, cost estimates, facility layout plans, root cause troubleshooting and continuous improvement initiatives. The incumbent must be a dynamic individual who can multi-task and oversee various activities associated with aerospace manufacturing ensuring that Mfg. Eng. activities are conducted in a manner that complies with company requirements (i.e. regulatory, safety, administrative, etc.). This position requires effective interaction with a broad spectrum of people both internal and external to the organization to successfully support operations and the corporate strategic vision. Minimum Required Qualifications: • 5 years of related experience in a machine shop manufacturing environment (Aerospace preferred, but not required), • 2 years of Gibbs and/or Mastercam & PRO- E usage, • High School or (GED) Diploma, Bachelor's degree in Mfg. Engineering or related field preferred, • Self-motivated individual who possess the ability to analyze, organize, plan, prioritize assignments, multi-task and achieve results through interaction with others, • Possess math skills required to design tools/fixtures and generate accurate, safe CNC Programs in an effective manner. Ability to interpret various types of graphs and data required for problem solving, SPC, etc., • Demonstrate effective verbal/written communication skills required for interacting with all levels of personnel both internal and external to the organization, • Secure external resources (subcontracted services) to maintain and ensure machine shop equipment is operational, • Knowledgeable/proficient in the areas of Lean Manufacturing concepts, employee training, development of equipment, operation, & training procedures/policies, effective application of mfg. methods, tool/fixture design, material selection, facility layout plans, cost estimates, DFM concepts, GT&D practices, machine shop documentation (operator./tooling sheets, routers, etc.), root cause investigations, trouble shooting, performance metrics and machine shop operational activities, • Must be computer literate. Demonstrate proficiency using Gibbs or Mastercam & PRO-E, CAD/CAM., • Ability to read, interpret documents (i.e. procedures, blueprints/technical drawings, etc.) and use necessary measuring devices/equipment to confirm tooling/fixturing geometries and dimensions, • Must be a US Citizen ESSENTIAL DUTIES / RESPONSIBILITIES: • Abide by all safety, quality, housekeeping and company policies/procedures to ensure compliance to various regulatory and internal system requirements, • All practices and activities related to Mfg. Eng. must be performed in a manner which supports commonality, standardization (where applicable), First Past Yield and utilization of safe/best industry practices, • Create, maintain and refine detailed mfg. documentation (i.e. Operation Sheets, Routers, Set-up/Tooling sheets, etc.) through effective selection of manufacturing methods (inclusive of inspection point selection), • Assist in securing external resources (subcontracted services) to maintain and ensure machine shop equipment is operational to achieve production efficiencies, and on-time customer shipments, • Generate, optimize, validate and maintain C.N.C. Programs for CNC MILLING and CNC TURNING CENTERS through the effective application of Gibbs & PRO-E CAD/CAM software, • Design efficient/safe tools and fixtures required to support machine shop operations, • Generate accurate estimates (i.e. set-up, cycle time, material, etc.) using cost effective mfg. methods, • Define, monitor and communicate the status of performance metrics to management. Implement appropriate actions to resolve identified issues, • Effectively communicate issues in a timely manner to all affected parties internal/external to the Marotta Organization, • Train and provide guidance to personnel required to support the goals and objectives associated with Mfg. Eng. and machine shop operations, • Foster a positive, cooperative and safe work environment through effective communication at all levels of the Marotta organization, • Actively participates in team meetings, root cause investigations, trouble shooting activities (as req'd), continuous improvement initiatives/programs, etc. to provide constructive recommendations and initiate actions to support company initiatives/goals/vision Work Environment : • While performing the duties of this job, the employee is frequently exposed to conditions typical of a manufacturing/machine shop environment, including, but not limited to: fluids, fumes or airborne particles, moving mechanical parts, noise and vibration, • This job interacts both in a professional office environment and a manufacturing/machine shop environment. This role uses standard office equipment such as computers, phones, photocopiers, filing cabinets and fax machines, as well as environments inclusive of the appropriate eye, hearing and foot protection (as required)., • Temperature of work environment may be affected by outside/external temperatures, machining processes, etc., • Overtime and weekend may be required, if job duties demand., • No travel is expected for this position Physical Requirements : • While performing the duties of this job, the employee is regularly required to talk and hear., • The employee is frequently required to reach with hands and arms, and to use hands to finger, handle or feel, • Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception and ability to adjust focus., • The employee is regularly required to stand at length (7-8 hours, daily), sit, walk, stoop, bend, turn, balance, and/or crouch, and move about the facility., • The employee may be required to lift and/or move items weighing up to 40 pounds, and occasionally up to 70 lbs. This position is at our Montville, NJ corporate offices location. Pay Range: $35.00 - 44.00/hour Many of our contracts require proof that you are a U.S. citizen and/or that an export license has been obtained for employees who are citizens of certain countries. Your employment, both initially and continually thereafter, is conditioned on production of such proof of citizenship and/or any export license that may be required to comply with any and all applicable laws, regulations, or executive orders, or required by Federal, State, or local government contracts. At Marotta Controls, we are committed to a fair, performance-driven compensation approach that promotes consistency across all levels of our organization. We ensure that pay decisions are free from bias, based on objective criteria, and are regularly reviewed. Your level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, experience, and internal consistency. Additionally, we offer a highly competitive compensation package for this opportunity, including incentive compensation and a comprehensive suite of premium benefits. These include medical, prescription, dental, vision, life, and disability insurance, a 401(k) plan with company match, tuition assistance, paid vacation, sick and personal days, paid holidays, and flexible scheduling options such as compressed workweeks. We value and reward employee achievements and host multiple engagement events each quarter to foster a strong, supportive workplace culture. If you are looking to grow or accelerate your career and be part of a best in class organization while enjoying a work-life balance, please visit our website at to learn more about us and to apply. Check out all of our openings at VETERANS ARE ENCOURAGED TO APPLY No agencies, please. Pay Range: $28.05 - $37.95 per hour

Crane Aerospace and Electronics has an exciting opportunity for a Sr. Manufacturing Engineer Managerat our West Caldwell, NJlocation. About Crane: Crane Aerospace & Electronics supplies critical systems and components to the aerospace and defense markets. You'll find Crane Aerospace & Electronics in some of the toughest environments: from engines to landing gear; from satellites to medical implants and from missiles to unmanned aerial systems (UAS). Every time you use phone navigation, make a bank transaction or have food delivered to your home, Crane Aerospace & Electronics Microwave product is hard at work. Located in the tight-knit, family-first West Caldwell, NJ., community, our West Caldwell facility supplies industry-leading microwave components and systems for use in space, defense and commercial applications, including GPS III satellites. With more than 60 years of expertise, our Microwave group has proven capabilities in major military, communications, electronic warfare, radar and satellite systems. Start the next chapter of your career with Crane Aerospace & Electronics! Job Summary: The Senior Manufacturing Engineer Manager leads the Manufacturing Engineering team, overseeing machining and special process development, CNC and CMM programming, tool and fixture design, and process validation. This role supports Value Stream leadership in productivity improvement, lead time reduction, and New Product Development (NPD) activities, ensuring all customer and internal cost requirements are met or exceeded. Key Responsibilities: \n • Oversee development and optimization of manufacturing processes including assembly, testing, tooling, fabrication, and SPC while ensuring compliance with company policies, customer requirements, and AS9100 standards.\n, • Drive continuous improvement through setup reduction, visual standard work, cost-reduction initiatives, Value Stream Mapping, and Kaizen activities aligned with Crane Business Systems (CBS).\n, • Evaluate and approve engineering requests, determining feasibility, make/buy status, and workload priorities; collaborate cross-functionally to ensure cost-effective manufacturing for new and revised products.\n, • Prepare and manage departmental budgets; oversee justification, selection, and acquisition of capital equipment to support operational efficiency.\n, • Support New Product Introduction (NPI) activities through participation in IPTs and ensure successful internal manufacturing readiness.\n, • Provide leadership and guidance to assigned personnel, ensuring adherence to company policies, work rules, and applicable Bargaining Unit Agreements.\n\n Minimum Qualifications: \n • \nExperience: 8+ years of relevant experience demonstrating expertise in manufacturing engineering and process development.\n, • \nKnowledge: Strong understanding of continuous improvement tools, raw materials, production processes, quality control, and cost optimization techniques.\n, • \nSkills: Critical thinking, time management, decision-making, and excellent communication skills; ability to motivate and develop teams effectively.\n, • \nEducation: Bachelor's degree in electrical, Electro-mechanical, Industrial, or Mechanical\n, • \nEligibility Requirement: This position may require access to Controlled Data or Information. Where the position requires such access only US Persons will be considered. As a US Department of Defense contractor, we are bound by International Traffic in Arms Regulations (ITAR).\n\n Preferred Qualifications: • Advanced degree (MBA or MS) preferred.\n Working Conditions: \n • Working conditions are normal for a manufacturing environment\n, • Manufacturing operations may require the use of safety equipment to include but not limited to: eye safety glasses, gowning, masks, hearing protectors, heel/wrist straps and any other required PPE\n, • May be exposed to unusual environmental conditions such as loud noises, cold temperatures, confined spaces, dust or fumes\n, • Schedule will fluctuate depending on the needs of the business\n\n Standing: up to 100% *percentage is approximate and may vary depending on work task Sitting: up to 100% *percentage is approximate and may vary depending on work task Lifting (in pounds): up to 25 pounds Pushing (in pounds): up to 25 pounds Mental/Visual: use of computer Workspace (line, cube, etc):work bench Top Benefits: As a team member at Crane Aerospace and Electronics, you'll enjoy: \n • \nBenefits: Health care, dental, vision, life and disability insurance starting the first day of the month\n, • \nTime Off: 15 days of paid time off that start accruing your first day at Crane and 12 paid holidays per year.\n, • \n401k Retirement Plan: 401k plan with company match\n, • \nEducation Reimbursement: eligible after 6 months of employment\n\n You can see a list of our benefits at or visit our website at for more information on our company and great opportunities. We are committed to operational excellence and world class processes. We employ Lean manufacturing techniques to optimize manufacturing efficiency and accuracy on all product lines. Our products are known for their technical strength, proven reliability and overall value. In our efforts to maintain a safe and drug-free workplace, Crane Aerospace & Electronics requires that candidates complete a satisfactory background check. FAA sensitive positions require employees to participate in a random drug test pool. Salary range: $185,500.00 to $220,000.00. Several factors contribute to actual salary, including experience in a similar role or performing comparable job responsibilities, skills, training, and other qualifications. Some roles may be eligible for participation in performance-based bonus programs. This description has been designed to indicate the general nature and level of work being performed by employees within this classification. It is not designed to contain or be interpreted as a comprehensive inventory of all duties, responsibilities, and qualifications required of employees assigned to this job. Crane Company. is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment and will not be discriminated against on the basis of race, color, religion, gender, sexual orientation, general identity, national origin, disability or veteran status.

With a passion for life Join our diverse teams of passionate people and a career that allows you to develop both personally and professionally. At Getinge we exist to make life-saving technology accessible for more people. To make a true difference for our customers - and to save more lives, we need team players, forward thinkers, and game changers. Are you looking for an inspiring career? You just found it. Job Overview: The Staff Engineer, Design is primarily responsible for designing and developing new production equipment and tooling to support manufacturing needs, including cost reduction, ergonomic improvements, quality enhancements, and new product introductions. Following equipment deployment, the engineer supports validation activities and assists maintenance/manufacturing teams when validation or maintenance findings require design modifications. This role ensures that equipment designs are robust, well-documented, and compliant with applicable medical device regulations. Job Responsibilities and Essential Duties • Design and develop new production equipment, tooling, jigs, and fixtures that improve manufacturability, efficiency, ergonomics, and quality., • Create detailed SolidWorks CAD models, engineering drawings, and specifications for internal fabrication or external vendor manufacturing., • Lead equipment reviews and incorporate feedback from manufacturing engineering, maintenance, and production operators., • Work with external suppliers and fabrication shops to communicate design intent, resolve build issues, and verify component quality., • Ensure all equipment designs comply with internal engineering standards, safety requirements, and medical device regulations., • Support Manufacturing Engineering and Maintenance teams during equipment validation , installation, and troubleshooting., • Implement and document equipment design modifications based on validation outcomes or equipment performance issues., • Provide updated drawings, documentation, and bills of materials when equipment changes are made., • Assist in preparing capital expenditure documentation for new equipment, including engineering rationale, cost analysis, and recommendations., • Make informed engineering decisions based on analysis, testing, and validated data., • Work independently while collaborating with cross-functional teams. Minimum Requirements • Bachelor's degree in Engineering (Mechanical Engineering preferred) or related technical discipline., • 8+ years of experience in equipment or tooling design within a manufacturing environment (medical device preferred)., • Proficiency in SolidWorks including part/assembly modeling, and drafting., • Hands-on experience with prototype builds, mechanical troubleshooting, and equipment commissioning., • Strong understanding of mechanical systems, pneumatics, electromechanical integration, and manufacturing methods., • Ability to generate and revise engineering drawings, BOMs, and technical documentation., • Excellent communication, collaboration, and timemanagement skills. Required Knowledge, Skills and Abilities • Strong mechanical design and engineering analysis skills., • Understanding of validation concepts (IQ/OQ/PQ) in a regulated environment., • High proficiency in CAD and supporting engineering software (Excel, Word, PDM, etc.)., • Ability to communicate effectively with operators, technicians, engineers, vendors, and management., • Strong problem-solving skills with a focus on robust design solutions. Targeted salary range: $115,000- $140,000, depending upon experience and location +10% bonus target #LI-LG1 About us With a firm belief that every person and community should have access to the best possible care, Getinge provides hospitals and life science institutions with products and solutions aiming to improve clinical results and optimize workflows. The offering includes products and solutions for intensive care, cardiovascular procedures, operating rooms, sterile reprocessing and life science. Getinge employs over 12,000 people worldwide and the products are sold in more than 135 countries. Benefits at Getinge: At Getinge, we offer a comprehensive benefits package, which includes: • Health, Dental, and Vision insurance benefits, • 401k plan with company match, • Paid Time Off, • Wellness initiative & Health Assistance Resources, • Life Insurance, • Short and Long Term Disability Benefits, • Health and Dependent Care Flexible Spending Accounts, • Commuter Benefits, • Parental and Caregiver Leave, • Tuition Reimbursement Getinge is an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, pregnancy, genetic information, national origin, disability, protected veteran status or any other characteristic protected by law.Reasonable accommodations are available upon request for candidates taking part in all aspects of the selection process.

This is a great opportunity for a construction Estimator or Cost Engineer with 5+ years of experience at an owners rep or a GC and looking to transition to the owners representative side of construction! Why join us? Health, Dental, Vision and Life insurance Remote flexibility 401k match HSA and FSA

Optimize performance, scalability, and cost of cloud infrastructure. We are seeking a DevOps / SRE Engineer to design, build, and operate scalable AWS infrastructure with a strong emphasis on deployments, automation, and CI/CD. Automate infrastructure provisioning and application delivery using Infr

Job DescriptionDescription: Position Overview Hawks & Company is seeking a Commercial HVAC Sales Engineer to expand our project sales capabilities and deepen relationships with both existing and newly developed customers. This role blends technical expertise, solution design, and customer relationship management. You will serve as a trusted advisor—identifying opportunities, developing engineered solutions, and guiding customers through the full lifecycle of their mechanical system needs. Key Responsibilities · Develop, cultivate, and maintain strong relationships within Hawks’ existing customer base. · Build a new book of business through networking, referrals, site visits, and proactive outreach. · Serve as the single point of contact for assigned customers, ensuring clarity, responsiveness, and trust. · Identify opportunities for equipment replacements, design-build retrofits, energy savings, and system upgrades. Conduct detailed site surveys to evaluate equipment condition, system performance, and code compliance. · Develop engineered solutions including equipment selections, conceptual designs, and scope narratives. · Identify and quantify energy savings opportunities and lifecycle cost improvements. · Collaborate with vendors, reps, and internal technical teams to validate designs, pricing, and feasibility. · Prepare accurate, professional proposals including scope, pricing, options, and value justification. · Present solutions to customers in a clear, consultative manner that supports confident decision-making. · Offer good/better/best options to align with customer budgets and operational priorities. · Ensure proposals meet Hawks’ standards for reliability, maintainability, and long-term value. Requirements: · 3–7 years of experience in commercial HVAC, mechanical systems, or related technical sales. · Strong understanding of HVAC equipment, controls, and system design principles. · Ability to conduct site surveys and translate findings into engineered solutions. · Excellent communication and relationship-building skills. · Self-driven, organized, and comfortable managing multiple opportunities simultaneously. · Proficiency with CRM tools, estimating software, and Microsoft Office. · Engineering degree, technical degree, or equivalent field experience preferred. We offer a competitive benefits package including: • PTO, • 401(k) Matching, • 9 Paid Holidays, • Bonus Plan, • Company truck/fuel card, • Employee Referral program, • 8-hour Shift, overtime available, • EAP/Wellness Program, • Health/Dental/Vision Insurance EEO

Job DescriptionYU & Associates, Inc., an awarding winning engineering firm located in Elmwood Park, New Jersey is seeking a Transportation Project Manager to join our team. As a Project Manager, you will lead and oversee transportation engineering projects, ensuring their successful execution and delivery to clients. Responsibilities: • Manage and supervise transportation engineering projects, including highway design, traffic engineering, roadway improvements, transportation planning, and airport design. Serve as the primary point of contact for clients, maintaining effective communication and building strong relationships., • Provide technical expertise and quality reviews in the areas of highway design, and protection of traffic, transportation planning, and/or any combination thereof., • Report on project staffing needs, including, but not limited to, recruitment, development, retention, and succession of project staff., • Monitor project progress, identify risks and issues, and implement appropriate mitigation strategies., • Prepare project budgets, schedules and specifications for labor and materials., • Conduct regular project meetings, providing updates to stakeholders and ensuring alignment with project objectives., • Prepare and review project deliverables, including reports, design plans, specifications, and cost estimates., • Manage project budgets and finances, including tracking expenses, approving invoices, and ensuring cost control measures are in place., • Support and participate in the development and mentorship of staff., • Stay informed about industry trends, emerging technologies, and best practices in transportation engineering.Qualifications:, • Bachelor's degree in civil engineering or a related field. A master's degree is a plus. Professional Engineer License in New York and/or New Jersey is required, or ability to obtain within 6 months., • 10+ years minimum transportation design experience. Highway/roadway design experience a plus, • Design Build project experience a plus., • Proficient with CAD/Design Software (AutoCAD, MicroStation, Civil 3d, Inroads/OpenRoads) and able to assist others as needed., • Proficient in Microsoft Office Suite, • Ability to lead a project and supervise technical staff., • Good client relationship development sills.We offer employees competitive compensation packages, medical/dental/vision, life insurance, short, and long-term disability, paid holidays, paid time off, and 401k retirement plan with company match. YU & Associates’ is an Equal Employment Opportunity employer fully committed to providing equal opportunity in all areas of employment practices. No employee or applicant for employment is discriminated against because of race, creed, color, religion, gender, gender identity or expression, sexual or affectional preference, sexual orientation, sex, ancestry or national origin, citizenship status, age, disability, marital or domestic status, veteran status, atypical hereditary cellular or blood trait, genetic information or testing, or any other legally protected category in all employment decisions. We foster a work environment that’s inclusive as well as diverse, where our employees can be themselves. Every idea and perspective are valued to meet our common goals. YU & Associates is committed to supporting our employees’ well-being by providing benefits that are a valuable part of the compensation package. We partner with our employees to foster a healthy, safe and rewarding lifestyle both at work and at home. The Y&A benefits program for full-time employees include: · Benefits: • Medical-National plan with low out of pocket costs to members., • Dental-National plan., • Vision-National plan with the largest vision network., • Life/AD&D-Benefit available should an employee pass away while employed., • Short-Term Disability-Benefit in the event an employee is unable to work for a short period of time., • Long Term Disability-Benefit in the event an employee is unable to work for an extended period., • Employee Assistance Program-Employee 3rd party support available when needed., • ADP Retirement Plan with company match., • Bonus Program – based on individual and company performance., • Yearly review – based on individual and company performance.Tax Savings Tools:, • Healthcare Reimbursement Accounts-Tax Free benefit to employees., • Flexible Spending Accounts-Tax Deductible benefit for employees., • Dependent Care and Commuter Program-Tax Deductible benefit for employees.Value Adds:, • Will Preparation Powered by JazzHR zSyMTsU93n

Be able to effectively coordinate field work, direct and support other technical staff, interact with clients, stakeholders, and contractors, and manage budgets, invoicing, accounts receivable, schedules, and subcontractors, and support proposals and cost estimates. Direct experience with New Jersey

Job Details Bachelor’s degree in Civil Engineering, Structural Engineering, or related field Engineer-in-Training (EIT) certification Understanding of geotechnical engineering principles Understanding of structural engineering fundamentals Ability to read and interpret construction drawings and sp

As a member of the Estimating Team, you will consult with the Engineering department, Field engineers, Project Managers, and other Estimating Team members to discuss and formulate estimates and resolve issues and report directly to the Estimating Manager. The Estimator is responsible for the followi

Well established commerical electrical engineering company seeking an experienced Electrical Estimator to join our growing team! This Jobot Job is hosted by: Josh Rabinowitz Are you a fit? Easy Apply now by clicking the "Quick Apply" buttonand sending us your resume. The ideal candidate will have a

As a member of the Estimating Team, you will consult with the Engineering department, Field engineers, Project Managers, and other Estimating Team members to discuss and formulate estimates and resolve issues and report directly to the Estimating Manager. The Estimator is responsible for the followi

Project Manager, multiple FT positions, Matawan, NJ.Manage, lead, coordinate, analyze, design, budget, plan , support, doc & transfer, etc.Scrum, Prince2, Agile, Processes Optim, MS tools, team lead skills, etc.BS (+5yrs related exp)/MS (3yrs related exp) in CS/Comp Apps/EE or equiv.Resumes to: Byte

Join to apply for the PMO Project Manager - Hiring ASAP (100 % Remote) role at Jobs via Dice Join to apply for the PMO Project Manager - Hiring ASAP (100 % Remote) role at Jobs via Dice TEKsystems' client is seeking a PMO Analyst/Project Manager with 4 + years of experience working in a large-scale

Restoration Estimators work with owners, adjusters, and Project Managers after traumatic events such as a fire or flood to clean up and repair damage to residential and commercial property.As a RE, you will be on scene after property disasters to accurately scope projects and sign work for our produ

Bachelor of Science in Engineering (Electrical or Mechanical Engineering is preferable). Bachelor of Science in Engineering (Electrical or Mechanical Engineering is preferable). Interfacing technical engineering including hardware & firmware development.

As an important member of our Sales team, your main responsibilities will include quoting, designing, ordering, and tracking HVAC equipment and systems for engineering firms and mechanical contractors in the NYC Metro area, Long Island, and Westchester. Utilize selection software to design customize

Candidate must have a BS degree in Civil Engineering and a minimum of 10 years of rail engineering experience. Applies broad knowledge of railroad engineering principles and practices to support design teams and junior engineers. Experience in transportation engineering, including inspection and/or

Project Engineer Glatt Group is seeking a highly skilled and motivated Project Engineer to join our team. Responsibilities Perform on‑site engineering services: FATs, commissioning, training, validation, troubleshooting, and warranty support. Qualifications Bachelor’s or Associate’s degree i