Equipment mechanic jobs in Clifton, NJCreate job alerts

Job DescriptionCarpenter: SCOPE AND FUNCTION: Works independently in a "zone", or as the only Carpenter/Maintenance Mechanic on a particular campus reporting directly to a second level supervisor. May guide and instruct other staff in the performance of a wide range of carpentry and mechanical duties required for all facilities. Such duties may be based on work orders which provide little or no instruction or assistance. Responsible for estimation of work and procuring appropriate materials for him/herself or the group. May guide and instruct craft trainees. May perform any duties of the group. May be assigned to perform general duties in other trade areas. DUTIES: -Primarily responsible for the planning and coordination of carpentry duties. -Selects specified materials in accordance with various building codes. -Prepares layouts and marks cutting and assembly lines. -Erects scaffolding and structural framework. -Applies dry wall and paneling to walls and ceilings. -Lays and repairs subflooring; installs and repairs flooring tile and linoleum. -Repairs, fits and installs window, doors, weather stripping, trim, etc. -Uses a variety of hand and power tools and measuring instruments. -Cleans shop and work areas. -Detects faulty operation of equipment; reports questionable conditions to supervisor; issues work orders to supervisor as necessary. -Conducts inventory of equipment, materials and supplies. -Advises management when to reorder stock. -Responsible for estimating work time, writing up lists of appropriate and needed materials, and providing such materials for him/herself or the group. -Performs related duties as required. -Provides guidance and instruction to craft trainees. REQUIREMENTS: -Requires a high school/vocational school education or equivalent, plus four years experience performing carpentry work. -Must be competent in performing complex and varied carpentry tasks. -Successful completion of an approved training program or of a certified apprenticeship program in the trade, plus two years experience and proven competency in performing complex and varied carpentry work may be substituted for the above experience. -Requires good communication skills, the ability to lift and carry up to 50 pounds, and the ability to read and comprehend technical manuals and blueprints. Pay Rate Range - 27.00+ #ZRSS Anthony Borbely Synerfac Technical Staffing 732-271-9333

Job Description Reporting to the Maintenance Supervisor or other Manager, the HVAC Mechanic “A” will lead the daily operation of the HVAC/R shop at the College. This position will be responsible for the ongoing temperature control and comfort of the heating and cooling systems at the College to support academic, lab, administrative, and specialized HVAC/R systems. POSITION SUMMARY Responsibilities include, but are not limited to: • Installs, operates, maintains, and repairs complex HVAC/R systems including water and oil pumps, water analysis and chemical treatment systems, air compressors, pneumatic, electrical and mechanical controls, refrigeration, heating, cooling and ventilating equipment, filters, condensers, cooling towers, evaporators, and heat exchangers., • Responds to HVAC system complaints, performs troubleshooting of systems and provides feedback to Supervisors and Managers on progress., • Plans and performs preventative maintenance tasks for College HVAC/R systems to optimize system performance and energy efficiency., • Installs electric power, piping, controls and duct work to replace, maintain or to install new equipment., • Maintains logs, checklists, and prepares written reports to Supervisor, as appropriate., • Enters information into the College’s Computerized Maintenance Management System (CMMS) to document all work, parts used, system conditions, hours worked, and leverages system data., • Ensures compliance with all safety standards, buildings codes, and environmental regulations., • Leverages Building Automation and Building Management Systems (BAS/BMS) to prioritize, document, and improve system performance and facility comfort., • Monitor and oversee College and contractor staff, as needed., • Attends training sessions and meetings to stay current on all trade, College, and regulatory requirements, • Maintains the cleanliness and orderliness of department spaces., • Prepares list of materials required to maintain inventory and complete projects., • Must respond to emergencies and maintenance tasks, as required, which may include working off-hours or holidays., • Reports to the College during closures and assists with snow and ice clearing operations, as needed. Education: High School diploma or equivalent required. Vocational School education or an appropriate apprenticeship preferred. Completion of a Journeyman level training program in HVAC/R or associate’s degree in HVAC/R Experience: • Minimum of Six years’ experience maintaining and repairing sophisticated commercial and industrial air conditioning systems including electric/pneumatic controls, fume hoods, high capacity centrifugal refrigeration equipment and roof top units., • Must be EPA Certified Universal Technician in accordance with Section 608 to handle CFCs, HCFCs, and HFCs, • Must have NJ Blue Seal Refrigeration, • Additional state or local licenses and certifications is a plus, • Experience working in an inclusive, collaborative, and respectful team setting., • Demonstrates knowledge of facility operations, maintenance, and industry standards., • Knowledge of power and hand tools, chemical handing procedures, and associated safety protocols., • Knowledge of computerized building automation systems and building managements systems., • Proficiency with Microsoft Office Suite and Google business suite experience preferred., • Provides excellent customer service to students, faculty, and staff., • Excellent organizational, prioritization, time management, and communication skills., • Experience with computerized maintenance management systems (CMMS) preferred., • Interprets and understands blueprints, schematics, wiring diagrams, and layouts., • Reviews projects and capital improvement scopes of work to identify opportunities for improvement., • Prolonged periods walking, standing, bending, stretching, pushing, pulling, climbing ladders, or kneeling on uneven surfaces, • Physically able to operate powered equipment and tools, • Must be able to lift up to 50 pounds at a time, • Able to work in unconditioned, noisy, dimly light, confined, and odorous spaces, including the ability to work in variable and sometimes extreme weather conditions such as rain, snow, storms, heat, cold, and other weather indigenous to the area, • Must be able to wear personal protective equipment (PPE) for prolonged periods of time, • Must have a valid Driver’s License, • Must have or obtain a Certified Pool Operator certificate within 6 months of hire Salary and Benefits • Annual Salary is $55,000-$67,193, • NJ Educator's Health Plan with Free Dental and Vision. NJ State Pension Plan., • 13 vacation days, 15 sick days, 4 personal days, 2 floating holidays, all designated holidays and 5 non-designated holidays a year. 3 Partial Sick Days. Bergen Community College provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

Job DescriptionBenefits: • 401(k) matching, • Dental insurance, • Employee discounts, • Free uniforms, • Health insurance, • Paid time off Principle Responsibilities: Perform Setup, Change Overs and Preventive Maintenance of various production and packaging equipment. Perform Lubrication, Cleaning and Inspection of production and packaging equipment, including tooling (punches, dies and dosing discs) for equipment such as tablet presses and capsule fillers. Ability to interpret blueprints and schematics and basic understanding of electrical circuits and PLCs. Maintain personal hygienic practices to always guarantee cGMP compliance, especially when transitioning from facilities maintenance projects to production process maintenance work. Assure to always follow safety regulations. Follow written, approved, procedures for general housekeeping, cleaning of overhead structures, and the handling and disposal of solid waste and trash to achieve cGMP sanitary compliance within the building. Ensure preventative maintenance is properly scheduled with Production and Packaging departments in order to meet customer service goals. Work with Production and packaging departments to help with packaging department during down time in maintenance. Follow written, approved, cleaning and maintenance procedures exactly to always maintain cGMP sanitary standards within the Production and Packaging Departments. Maintain and secure tools, parts, and supplies. Ensure that non-food grade lubricants and chemicals are kept securely and are segregated from food grade supplies. Participate in monthly sanitation audits with QA Personnel. Document all work performed and maintain proper documentation and records of projects and work completed. Act as point of contact for outside contractors/vendors and schedule vendors to come in to perform maintenance, repairs or equipment replacement. Attend all cGMP training classes. Perform other duties, as assigned. Additional Requirements: To perform this job successfully, an individual must be able to perform each principal responsibility satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Education: High school graduate preferred, but not required if proficiency in communication, mathematics, work habits, and attitude is demonstrated during the probationary period. Experience: 2-5 years of hands-on experience in a solid, full scale, manufacturing environment. Experience working in the vitamin or food manufacturing industry is required. Physical Requirements: Work requires ability to lift up to 50 pounds unassisted, or up to 100 pounds with mechanical assistance; standing, walking, bending and/or stooping for periods of five hours or more; moving and examining objects at high and low reach, and reading for periods of three hours or more. Position requires normal visual acuity. Additional Skills and Qualifications: Knowledge of cGMP standards to ensure the maintenance of the cGMP standard of quality. Ability to read and interpret documents such as safety rules, operating and maintenance work instructions, procedure manuals and SDS sheets. Must have the ability to communicate effectively orally and in written form. Must be able to add, subtract, multiply and divide in all units of measure using whole numbers, common fractions and decimals. Ability to apply common sense understanding to carry out instructions furnished in written, oral or diagram form. Must have ability to solve moderately complex problems involving multiple variables in standardized situations. Must have a deliberate and acute sense of documentation of all activities while in the manufacturing environment. Must be familiar with and be able to communicate via e-mail, verbally and in writing. Must be able to communicate effectively in a cross functional team environment to complete work tasks as instructed. Demonstrated attention to detail and thoroughness are critical. Must have sound judgment and decision-making skills. Familiarity with and ability to use computer software including word processors & spreadsheets (Microsoft Word, Excel), and ERP Systems preferred. Certificates/Licenses/Registrations: Forklift certified.

Job Description Duties: The General Maintenance Mechanic performs a variety of maintenance and engineering duties for the hospital's Facilities Department. Would be assigned to work for the Engineering Manager or the Maintenance Planner / Coordinator on a regular basis May also be assigned at times to receive guidance and instruction from a senior mechanic. May also be assigned at times to receive guidance and instruction from the A.D.N. or Facilities Supervisor on call. Incumbent is guided by a comprehensive and proven skill in the basic knowledge of building trades, which could include carpentry, paintint, electrical, plumbing, HVAC and mechanical repairs, plaint maintenance methods, techniques, procedures, and operation and use of department equipment and supplies. Performs a variety of duties in maintaining, repairing and renovating plant and facilities. Performs a variety of building service duties. Services as a member of facility's fire response team. Assists in removing snow from facility's grounds and maintains grounds as required. 9am - 5pm 25 -32 hours/week

Job Description POSITION: Airport Facilities Maintenance (TWU Airport Mechanic – Mechanical & Electrical) REPORTS TO: Airport Maintenance Manager LOCATION: Teterboro, NJ AIRPORT: Teterboro Airport (TEB) The position works within the airport’s maintenance department and supports airport facilities maintenance at Teterboro Airport. The airport maintenance department is responsible for airport grounds and buildings and includes the airport’s runways, taxiways and associated lighting, signage, pavement, and grass areas. This job is currently a union covered position with the Transport Workers Union (TWU Airport Mechanic – Mechanical & Electrical). Duties & Responsibilities include the following: • Under general supervision, maintains and repairs all mechanical and electrical equipment on the airport that fall under the responsibility of the Company under contract with the airport operator., • Performs general maintenance of the airport facilities including the servicing, maintaining, repairing and altering of buildings and grounds (including fixtures and equipment), including such work as carpentry, masonry, plumbing, electrical, landscaping, painting, vegetation control and removal and primary snow removal; the servicing, maintaining and repairing of tools and equipment including hand tools, power tools, machine tools, vehicles and mobile equipment (including driving) provided by the Company, including such work as fabricating, repairing, assembling, disassembling, testing, inspecting, fueling, oiling and cleaning., • Removes assemblies, disassembles, cleans, repairs, or replaces defective parts and reassembles. Locates shorts, grounds or open circuits and corrects trouble on all airport electrical systems., • Supports all associated requirements under quality management system including tasks, documentation and written and practical tests., • Responsible for maintaining customer contact through positive lines of communication. Professionally representing the Company through frequent and meaningful contacts with customers., • Responsible for operation of snow removal and landscaping equipment during any and all times specified by management., • Operate equipment as assigned, with valid a CDL., • Performs other duties as assigned. Qualifications: • High school diploma or its equivalent, • Two years’ work experience in electrical and mechanical maintenance preferred., • Ability to perform the duties of this classification., • Possession of or ability to obtain a valid CDL driver’s license in the person’s state of residence., • 401(k), • Health Insurance, • Dental Insurance, • Vision Insurance, • HSA/FSA, • Life and AD&D Insurance Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand; walk; use hands to finger, handle to feel; reach with hands and arms; climb or balance; stoop, kneel, crouch, or crawl; talk or hear; and smell. The employee is occasionally required to sit. The employee must regularly lift and/or move more than 50 pounds or more. Specific vision abilities required by this job include vision, distance vision, peripheral vision, depth perception and ability to adjust focus. EOE DFWP

Job DescriptionBenefits: • 401(k), • Dental insurance We are seeking a talented Commercia Laundry Mechanic to join our team. The Commercial Laundry Mechanic has overall responsibility for the daily repair and preventative maintenance of industrial textile processing equipment and facility maintenance. The Commercial Laundry Mechanic ensure that tasks such as start-up and shut-down procedures, electrical troubleshooting, maintaining and operating boilers, welding and cutting, hydraulics, pneumatics, mechanical, or other systems are completed according to policies and procedures. As well as completing daily production workload in a timely manner, consistently providing quality standards in all areas of laundry operations. Duties include but are not limited to: • Maintain, service, and repair all models of commercial laundry equipment including but not limited to washers, driers, ironers, boilers, extractors, presses, stackers, and other machinery used., • Troubleshoot electrical, mechanical, and plumbing, issues and rebuild pumps, valves, regulators as needed while utilizing an excellent understanding of steam/thermal systems., • Diagnoses problems, replaces or repairs parts, tests and makes adjustments., • Inspect, maintain, repair, and service water treatment plant machinery and equipment, including pumps, valves, valve actuators, motors, engines, meters, drives, tanks, reservoirs, compressors, chemical feed and storage systems, UV disinfection systems, heating and air conditioning systems, and other equipment typical of a water treatment facility., • Install and rebuild pumps, motors, piping systems, and specialized water treatment equipment., • Fabricate parts and equipment; operate welding, cutting, and general fabrication equipment., • Pack, lubricate, clean, and paint mechanical equipment and motors., • Inspect newly installed mechanical equipment to ensure safe and satisfactory operation and functionality., • Ensures work is performed safely and efficiently., • Read and interpret technical operation and repair manuals., • Effectively participate with preventive maintenance schedule on all laundry equipment., • Establish an organized laundry inventory system for purchasing of all parts & materials., • Provide technical training to the laundry team. Maintain a constant awareness of safety problems and report unsafe conditions and exposures to laundry manager., • Must understand and adhere to all safety procedures., • Effectively manage daily maintenance requests to minimize equipment down-time and continually improve operational processes., • Strictly adhering to all safety rules, policies and procedures required by Alsco, law, and what is recognized as common practice in the industry., • Keep accurate and timely records of maintenance performed., • Follow written and verbal instructions and perform other tasks as directed by supervision., • Interact with all colleagues in a professional manner, • Comply with all Federal, State and local laws., • Working on boiler and fan systems, • Maintaining logs, records and reports of serviced equipment, • Qualifications:, • Minimum of 3 years hands on experience in a laundry maintenance or similar operation, • Must be able to maintain high levels of confidence., • Maintain a working knowledge of policies and procedures and their proper application., • Minimum of five years maintenance engineering experience with specific knowledge of machinery, electricity, electronics, plumbing, hydraulics, pneumatics, welder and boiler applications., • Quantifiable working knowledge of Weishi systems, dyers, folders, sorting, binding, etc. equipment preferred, • Ability to troubleshoot issues in a timely manner, • Ability to shift priorities and changing demands, • OSHA compliance, • Must be able to stand for long periods of time; able to bend, stretch reach and stoop on a continual basis Typical Physical Activity Standing, sitting, walking, stooping, driving a forklift, working on ladder, being in elevated height to perform work, grasping, moving equipment, pushing, pulling, moving loaded carts weighing up to 500 lbs, reading, speaking, hearing, and lifting up to 60 lbs. Occasionally stoop, bend, kneel, crouch, crawl, reach, and twist; push, pull, lift, and/or carry moderate to moderately heavy amounts of weights; operate assigned equipment and vehicles; ability to verbally communicate to exchange information. Typical Environmental Conditions Inside and outside areas of a typical industrial laundry facility, which includes working with and around large machinery, variations in temperature, noise, odors, humidity, lint and dust, in general offices or on outside grounds. Water treatment plant and field environment; exposure to noise, dust, grease, fumes, gases, potentially hazardous chemicals, electrical energy, and inclement weather conditions, including hot, cold, wet, and/or humid conditions; work around water; work on slippery, uneven, surfaces; work in confined spaces; routinely climb ladders, stairs; regularly work near moving mechanical parts; and work around moderately loud noise levels; incumbents must be available to work variable shifts, including evenings, nights, weekends and holidays.

Job Description MECHANICS NEEDED - $1,000 signing bonus for forklift mechanics certified on competitive equipment! We are not seeking forklift operators; this role is geared towards those with experience repairing forklifts or other heavy equipment. Candidates need minimum 1-year experience. We Service NY, NJ & Eastern PA Founded in 1977, C&C Lift Truck, Inc. has continuously grown over the last 42 years to become one of the leading forklift dealerships in the Tri-State area, and one of the leading Komatsu dealers in the country. We are family owned and operated, and ready to expand our team! We are currently looking for all experience level Forklift Mechanics to service our customers in the NY, NJ and Eastern, PA areas. Our mechanics will respond to customer service calls on location and accurately diagnose and repair customer equipment. C&C Offers: • Union Pension Plan, • Medical, Dental, Vision benefits available, • Vacation Time, • Retirement Plan Opportunities, • Overtime Opportunities, • Competitive wages, • Supplemental Pay (bonus pay, commission pay, signing bonus) Primary Responsibilities: • Job will require IC and Electric truck repairs, • Complete scheduled PM and repair assignments within the time frame allotted, • Track van inventory to meet PM schedule, • Perform routine forklift maintenance, • Use diagnostic tools to test forklift components, • The ability to work in all types of weather conditions, • The ability to stand and walk for long periods of time, • Employee must be able to push, pull, carry, grasp, reach and crouch when needed for the job, • Employee must be able to communicate effectively with management, customers, and other employees, • Job will require the employee to interpret documents, comprehend basic instructions (written or verbal), apply abstract principles to a wide range of complex tasks, • Employee must be able to analyze information and write a diagnosis on work orders, • The ability to decipher different colors, • Prefer 1 or more years' experience as a heavy equipment mechanic or related mechanic jobs, • Valid Driver’s license with a good driving record, • Strong mechanical aptitude and troubleshooting skills, • Deadline and detail-oriented, • Valid Driver’s license with a good driving record, • Ability to lift 50 lbs., • Willingness to learn Monday - Friday, 7:30 a.m to 4:00 p.m. shop hours All candidates will be required to submit to drug screening and motor vehicle background checks. We are an equal opportunity employer. We prohibit discrimination and harassment of any kind based on race, color, sex, religion, sexual orientation, national origin, disability, genetic information, pregnancy, or any other protected characteristic as outlined by federal, state, or local laws.

Overview: SCHEDULE: 12:00 PM - 9:00 PM HOURLY RATE: $32.64 Interstate Waste Services is the most progressive and innovative provider of solid waste and recycling services in the country! We primarily service Northern New Jersey, Southern New York State, New York City, Connecticut, with a landfill located in Ohio, where we also own and operate a state-of-the-art rail-served landfill. We cater to a diverse range of residential, industrial and commercial customers. Our mission has always been to provide our customers with the highest quality waste, recycling and environmental services, while keeping focus on employee, customer and environmental safety. What makes our company culture unique is we have mastered the ability to balance the standards of a large corporate company while maintaining our small business family style culture. Essential Job Summary:: Our Diesel Mechanics perform inspection, diagnosis, preventative maintenance, and repair of electrical, hydraulic, suspension, brake and air systems on vehicles and equipment, including diesel heavy trucks and engines. Utilizing diagnostic software, the Mechanic is responsible for interpreting failure modes and initiate or assign necessary repairs. At times, the Mechanic may be on call, and required to assist with emergency breakdowns. Requirements and Qualifications:: * Applicants must be at least 18 years of age and legally eligible to work in the United States. * A valid driver’s license is required. CDL preferred. * Experience working on heavy duty diesel equipment OR training from a recognized trade school is required. * Must be able to speak and read English well enough to converse with colleagues, drivers and dispatch, and be able to make legible entries on reports and records. * Must be able to meet the physical and safety requirements of the position. * Must be able to provide own tools Entry-level candidates will be considered for this position and on-the-job training provided. Candidates with the following experience may be considered for a Mechanic B or A level position which has a higher level of responsibility as well a compensation: * 2+ years experience working as a heavy duty Diesel Mechanic * Experience with troubleshooting/repairing DPF systems diagnostic software such as Premium Tech Tool (Mack), Allison transmission, Cummins, CAT, Peterbilt, and Paccar. * Working knowledge of applicable DOT and OSHA standards and regulations. * Other duties as assigned. Additional Information: This job description is intended to be an accurate representation of the general functions of the job, rather than exhaustive list of duties, responsibilities, or experience. Other duties may be assigned, requested, or required. Aspects of the job may be altered without notice. Interstate Waste Services provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Salary Range Minimum: USD $32.64/Hr. Salary Range Maximum: USD $32.64/Hr.

Overview: Schedule: Monday - Friday 8:00 AM - 6:00 PM, Occassional Satuday 6:00 AM - 2:00 PM Interstate Waste Services is the most progressive and innovative provider of solid waste and recycling services in the country! We primarily service Northern New Jersey, Southern New York State, New York City, Connecticut, with a landfill located in Ohio, where we also own and operate a state-of-the-art rail-served landfill. We cater to a diverse range of residential, industrial and commercial customers. Our mission has always been to provide our customers with the highest quality waste, recycling and environmental services, while keeping focus on employee, customer and environmental safety. What makes our company culture unique is we have mastered the ability to balance the standards of a large corporate company while maintaining our small business family style culture. Essential Job Summary:: Our Yellow Iron Diesel Technicians/Mechanics perform inspection, diagnosis, preventative maintenance, and repair of electrical, hydraulic, suspension, brake and air systems on vehicles and equipment, primarily including yellow iron machinery, diesel heavy trucks and engines. The Technician or Mechanic is not only responsible for understanding maintenance and breakdown needs and initiating/ assigning necessary repairs, but also must be able to operate the machinery being repaired. At times, the Technician may be on call and required to assist with emergency breakdowns. Essential Job Functions: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Other minor duties may be assigned.: • Maintains advanced knowledge to diagnose and repair mechanical problems on heavy equipment (heavy equipment includes but not limited to: yellow iron machinery, tractor trailers, forklifts, and other diesel trucks), • Performs repairs and assigned preventative maintenance services., • Estimates time and material cost on vehicle repairs and requisition of new parts., • Conduct safety checks on vehicles., • Completes required paperwork utilizing fleet maintenance software program associated with repairing vehicles, documenting part usage, and accounting for repair time., • Reviews, completes, or assigns repairs identified on Driver Vehicle Inspection Reports., • Maintain a clean, safe work area in compliance with Company safety protocols and OSHA standards., • This position will have no direct reports, however they will work in collaboration with the other yellow iron diesel mechanic on staff, although on different shifts., • Assists Sr. Technicians in the completion of project work. Requirements and Qualifications::, • Applicants must be at least 18 years of age and legally eligible to work in the United States., • A valid driver’s license is required. CDL a plus., • At least 5 years of experience in job duties., • Sanitation or construction industry experience a plus., • Computer diagnostic experience as diesel technician a plus., • Experience with troubleshooting/repairing DPF systems diagnostic software such as Premium Tech Tool (Mack), Allison transmission, Cummins, CAT, Peterbilt, and Paccar., • Working knowledge of applicable DOT and OSHA standards and regulations., • Must be able to speak and read English well enough to converse with colleagues, drivers and dispatch, and be able to make legible entries on reports and records., • Must be able to meet the physical and safety requirements of the position., • Must be able to provide own tools Work Environment • We are continuously investing in equipment, and many of our trucks are less than 2 years old., • Potentially hazardous work environment with many moving parts and machinery; must always be alert of surroundings., • Only during breakdowns will this position be required to enter transfer station loading/ dumping area., • Personal Protective Equipment (PPE) will be provided. Interstate Waste Services provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Salary Range Minimum: USD $25.00/Hr. Salary Range Maximum: USD $32.00/Hr.

Overview: Fuel Your Career with Us! Are you a skilled Diesel Mechanic looking for your next opportunity? Join our team at Interstate Waste Services and put your expertise to work! Interstate Waste Services is the most progressive and innovative provider of solid waste and recycling services in the country! We primarily service Northern New Jersey, Southern New York State, New York City, with a landfill located in Ohio, where we also own and operate a state-of-the-art rail-served landfill. We cater to a diverse range of residential, industrial and commercial customers. Our mission has always been to provide our customers with the highest quality waste, recycling and environmental services, while keeping focus on employee, customer and environmental safety. Our Diesel Mechanics perform inspection, diagnosis and repair of electrical, hydraulic, suspension, brake and air systems on vehicles and equipment, including diesel heavy trucks and engines. Performs preventive maintenance inspection (PMI); troubleshoots, repairs, and rebuilds major components on vehicles and equipment. Ensures accurate diagnosis and effective repair and/or replacement of component. Requirements • 2+ years’ experience working as a heavy-duty Diesel Mechanic, • Hydraulics experience is highly preferred, • Engine and transmission maintenance and repairs, • Experience with diagnostic software such as Premium Tech Tool (Mack), Allison transmission, Cummins, Peterbilt, and Paccar., • Chassis component repairs and maintenance including air brakes system, suspension, drivetrain and steering components., • Maintain and repair exhaust systems equipped with DPF systems., • Maintain a clean, safe work area in compliance with Corporate / OSHA Standards., • Must be able to provide own tools., • Assists with service calls for breakdowns, • Competitive wage (based on experience) plus Time and a half for Overtime., • 8 National Holidays., • Union Shop., • Medical, dental, vision, life, short-term and long-term disability coverage., • 401(k) We believe in providing the training and development you need to grow your career with IWS. Many of our Supervisors, Managers, and other leadership staff, started their careers as Helpers, Drivers, or Dispatchers. IWS is proud to be an equal opportunity employer. We celebrate diversity and do not discriminate based on race, religion, color, national origin, sex, sexual orientation, age, veteran status, disability status, or any other applicable characteristics protected by law. Salary Range Minimum: USD $18.63/Hr. Salary Range Maximum: USD $21.92/Hr.

Overview: Variable Shifts Available Interstate Waste Services is the most progressive and innovative provider of solid waste and recycling services in the country! We primarily service Northern New Jersey, Southern New York State, New York City, with a landfill located in Ohio, where we also own and operate a state-of-the-art rail-served landfill. We cater to a diverse range of residential, industrial and commercial customers. Our mission has always been to provide our customers with the highest quality waste, recycling and environmental services, while keeping focus on employee, customer and environmental safety. What makes our company culture unique is we have mastered the ability to balance the standards of a large corporate company while maintaining our small business family style culture. Essential Job Summary:: Our Mechanics perform inspection, diagnosis, preventative maintenance, and repair of electrical, hydraulic, suspension, brake and air systems on vehicles and equipment, including diesel heavy trucks and engines. Utilizing diagnostic software, the Mechanic is responsible for interpreting failure modes and initiate or assign necessary repairs. At times, the Mechanic may be on call, and required to assist with emergency breakdowns. Essential Job Functions: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Other minor duties may be assigned.: • Knowledge in welding and fabrication, electrical high voltage 480V, hydraulics pumps and motors, able to read electrical and hydraulic schematics Applicants must be at least 18 years of age and legally eligible to work in the United States. * A valid driver’s license is required. CDL preferred. * Experience working on heavy duty diesel equipment OR training from a recognized trade school is required. * Must be able to speak and read English well enough to converse with colleagues, drivers and dispatch, and be able to make legible entries on reports and records. * Must be able to meet the physical and safety requirements of the position. * Must be able to provide own tools Requirements and Qualifications:: • 2+ years experience working as a heavy duty Diesel Mechanic, • Experience with troubleshooting/repairing DPF systems diagnostic software such as Premium Tech Tool (Mack), Allison transmission, Cummins, CAT, Peterbilt, and Paccar., • Yellow Iron experience and/or experience as a Mechanic or Technician for a refuge company is a plus., • Working knowledge of applicable DOT and OSHA standards and regulations. Interstate Waste Services provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Salary Range Minimum: USD $29.00/Hr. Salary Range Maximum: USD $32.00/Hr.

Overview: Fuel Your Career with Us! Are you a skilled Diesel Mechanic looking for your next opportunity? Join our team at Interstate Waste Services and put your expertise to work! Interstate Waste Services is the most progressive and innovative provider of solid waste and recycling services in the country! We primarily service Northern New Jersey, Southern New York State, New York City, with a landfill located in Ohio, where we also own and operate a state-of-the-art rail-served landfill. We cater to a diverse range of residential, industrial and commercial customers. Our mission has always been to provide our customers with the highest quality waste, recycling and environmental services, while keeping focus on employee, customer and environmental safety. Our Diesel Mechanics perform inspection, diagnosis and repair of electrical, hydraulic, suspension, brake and air systems on vehicles and equipment, including diesel heavy trucks and engines. Performs preventive maintenance inspection (PMI); troubleshoots, repairs, and rebuilds major components on vehicles and equipment. Ensures accurate diagnosis and effective repair and/or replacement of component. Requirements • 2+ years’ experience working as a heavy-duty Diesel Mechanic, • Hydraulics experience is highly preferred, • Engine and transmission maintenance and repairs, • Experience with diagnostic software such as Premium Tech Tool (Mack), Allison transmission, Cummins, Peterbilt, and Paccar., • Chassis component repairs and maintenance including air brakes system, suspension, drivetrain and steering components., • Maintain and repair exhaust systems equipped with DPF systems., • Maintain a clean, safe work area in compliance with Corporate / OSHA Standards., • Assists with service calls for breakdowns, • Must be able to provide own tools., • A valid driver’s license is required., • Competitive wage (based on experience) plus Time and a half for Overtime., • Union Shop., • Medical, dental, vision, life, short-term and long-term disability coverage., • 401(k). We believe in providing the training and development you need to grow your career with IWS. Many of our Supervisors, Managers, and other leadership staff, started their careers as Helpers, Drivers, or Dispatchers. IWS is proud to be an equal opportunity employer. We celebrate diversity and do not discriminate based on race, religion, color, national origin, sex, sexual orientation, age, veteran status, disability status, or any other applicable characteristics protected by law. Salary Range Minimum: USD $30.10/Hr. Salary Range Maximum: USD $50.00/Hr.

Overview: Fuel Your Career with Us! Are you a skilled Diesel Mechanic looking for your next opportunity? Join our team at Interstate Waste Services and put your expertise to work! Interstate Waste Services is the most progressive and innovative provider of solid waste and recycling services in the country! We primarily service Northern New Jersey, Southern New York State, New York City, with a landfill located in Ohio, where we also own and operate a state-of-the-art rail-served landfill. We cater to a diverse range of residential, industrial and commercial customers. Our mission has always been to provide our customers with the highest quality waste, recycling and environmental services, while keeping focus on employee, customer and environmental safety. Our Diesel Mechanics perform inspection, diagnosis and repair of electrical, hydraulic, suspension, brake and air systems on vehicles and equipment, including diesel heavy trucks and engines. Performs preventive maintenance inspection (PMI); troubleshoots, repairs, and rebuilds major components on vehicles and equipment. Ensures accurate diagnosis and effective repair and/or replacement of component. Requirements • 2+ years’ experience working as a heavy-duty Diesel Mechanic, • Hydraulics experience is highly preferred, • Engine and transmission maintenance and repairs, • Experience with diagnostic software such as Premium Tech Tool (Mack), Allison transmission, Cummins, Peterbilt, and Paccar., • Chassis component repairs and maintenance including air brakes system, suspension, drivetrain and steering components., • Maintain and repair exhaust systems equipped with DPF systems., • Maintain a clean, safe work area in compliance with Corporate / OSHA Standards., • Must be able to provide own tools., • Assists with service calls for breakdowns, • Competitive wage (based on experience) plus Time and a half for Overtime., • 8 National Holidays., • Union Shop., • Medical, dental, vision, life, short-term and long-term disability coverage., • 401(k) We believe in providing the training and development you need to grow your career with IWS. Many of our Supervisors, Managers, and other leadership staff, started their careers as Helpers, Drivers, or Dispatchers. IWS is proud to be an equal opportunity employer. We celebrate diversity and do not discriminate based on race, religion, color, national origin, sex, sexual orientation, age, veteran status, disability status, or any other applicable characteristics protected by law. Salary Range Minimum: USD $22.00/Hr.

Job Description Job Summary The Small Engine Mechanic will be responsible for diagnosing, repairing, and maintaining a wide range of landscaping and construction equipment, including two-stroke and four-stroke engines, compact equipment, and handheld tools. Key Responsibilities: · Inspect, diagnose, and repair small engines, including lawnmowers, chainsaws, trimmers, blowers, generators, and snow blowers. · Perform routine maintenance, including oil changes, air filter replacements, carburetor adjustments, and spark plug installations. · Troubleshoot electrical, fuel, and mechanical systems to ensure optimal equipment performance. · Maintain service records and track completed repairs using internal systems. · Order necessary parts and ensure inventory is maintained for common repairs. · Communicate clearly with supervisors and operators about equipment status and timelines. · Maintain a clean, organized, and safe work environment. · Assist in seasonal equipment prep and winterization. Qualifications · High school diploma or equivalent; trade school or technical certification preferred. · Minimum of 2 years' experience repairing small engines or related mechanical work. · Strong knowledge of gas-powered and diesel-powered small engines, hydraulic systems, and two- and four-cycle engines. · Ability to read and interpret schematics and service manuals. · Valid driver's license with clean driving record. · Ability to lift 50 lbs and work in various weather conditions. Preferred Skills · Experience with landscaping or construction equipment. · Welding and fabrication skills a plus. · Bilingual (Spanish/English) is a plus. · OSHA 10/30 certification preferred, or willingness to obtain. Schedule & Compensation • Full-time position | Monday–Friday, 7:00 AM – 3:30 PM, • Pay: $24-32 hourly (Depending experience, certifications, and licensing)

Job DescriptionBenefits: • 401(k), • Dental insurance, • Free uniforms, • Paid time off, • Bonus Potential, • Paid transportation of your tools to our shops, • Opportunity for Continued Career Growth, • Fast Paced, • Friendly Team Environment, • Health/Dental/Vision Other Benefit Paid Time Off, • Certificate Reimbursement, • Weekly PayNationally Branded Auto Repair Center is looking for the Most Important Part of Our Business, GREAT people to join our team! We believe you can take us to the next level, and we can do the same for you. We have built a business that challenges the norm, rewards excellence, and provides a comfortable life for all of us. We are always innovating, making improvements, and setting the bar higher for ourselves and the automotive service industry. Why our shop? • Center opened 6 days, closed Sunday., • Interact with people every day., • Up-to-date equipment and software. We use state-of-the-art software to run our shop efficiently and provide every customer with a wonderful experience., • Electronic Diagnostic, • Latest Digital Vehicle Inspections., • Culture of continuous improvement and growthWe are currently seeking Career Driven Highly Productive Technicians to become an integral part of our team! You will diagnose, adjust, repair, and overhaul automotive vehicles. Responsibilities: • Diagnose and repair automotive vehicles., • Perform routine vehicle tune-ups and maintenance., • Provide labor and time estimates for automotive repairs., • Inspect and test vehicles for necessary adjustments., • Drive Manual, • Perform emissions test.Qualifications:, • Previous experience as an automotive technician, mechanic, or other related fields, • Knowledge of diagnostic and repair equipment, • Strong mechanical aptitude and troubleshooting skills., • Deadline and detail-oriented, • Exhaust & welding experience a plus, • Must have tools.Why Meineke?, • Meineke values personal and professional growth., • Benefit from ongoing training and development programs to enhance your automotive knowledge and stay up-to-date with the latest industry trends and advancements., • Join a team of driven and talented individuals who share your passion for high-quality repair work. Experience a supportive and collaborative work environment that encourages growth and camaraderie., • With locally-owned Meineke shops, experience a sense of community and connection with your customers and fellow team members.

Job Description First for a reason: At First Student, we are a family of 60,000+ employees who take pride in safely transporting more than 5 million students and passengers to and from their destinations each day! Our family of brands include Transco, Total Transportation, Maggies Paratransit, and GVC II. Our employees are at the forefront of safety and innovation; they create and implement the most advanced training and technology the transportation industry has to offer. This position will perform routine and some non-routine maintenance and repair work on vehicles (buses, vans etc.) which adheres to FirstGroup standards. This may include but is not limited to tire maintenance, fulfilling service calls for repair, conducting visual inspections of vehicles and related work as assigned. Performs work under minimal supervision. Handles more advanced issues and problems and may refer more complex issues to higher-level staff. All work is performed with a commitment to safety. May mentor or provide informal guidance to Technician I.In the state of Washington, this position is considered a safety-sensitive position and is therefore subject to drug and alcohol testing, including cannabis. • Job DescriptionMajor Responsibilities, • Ensure vehicles are maintained and safe for our customers by performing limited repairs with moderate supervision on basic and advanced maintenance such as replacement of light bulbs, fuses, lenses, wiper blades, belts, hoses, batteries, check fluid levels, change fluids and filters and lubricate components., • Perform mechanical repairs under moderate supervision including the repair of brakes and brake inspections, engine tune-ups, suspensions, drive trains, transmission clutches and other repairs., • Maintain records of all maintenance work completed on vehicles including parts and supplies used. Ensure that work orders are completed properly and accurately. Maintain parts usage records and order repair parts from designated suppliers, • Assist Tech III with preventative maintenance (PM's), safety maintenance inspections and annual maintenance inspections at prescribed intervals of time and usage, • Remove and replace engine, transmission and differential assemblies with Maintenance Technician III supervision., • Diagnoses and performs accurately all phases of vehicle and equipment repair under moderate supervision., • Notify supervisor of potentially dangerous equipment and corrective action taken, • Evaluates completed work prior to release and seeks approval where required, • Assist with road calls and emergency services as necessary, • Adhere to FirstGroup standards, policies and procedures, • Moves vehicles safely between job and work area, • Repair and maintain all shop equipment, • Cleans vehicles as requested or required, • Other responsibility as requested or required Minimum Education or Certifications Required • High school diploma or GED equivalent preferred; vocational or technical certification in vehicle repair (preferred), • Class B CDL with passenger endorsement required (or expected within 3 months of hire), • State inspection license (if required), • ASE Certification preferred. Must participate in ASE testing program within 1 year (expected to have 3 ASE within 12 months of hire) Minimum Experience or Skills Required • Intermediate mechanical aptitude and 3 years of automotive or diesel repair experience (preferred) or equivalent education and experience, • Adhere to standards set by state DOT for motor vehicle inspections and safety standards, • Valid driver's license, • Intermediate problem-solving ability, • Intermediate computer skills, • Comfortable using hand tools, • Strong customer service skills and communication skills, • Ability to work independently as well as part of a team, • Maintain an organized shop and clean work environment, • Regular, predictable, full attendance is an essential function of the job, • Making sure vehicles are maintained and safe for our customers, • Possess adequate mechanic tool inventory to complete all assigned duties and maintained in a clean and safe manner Physical Requirements and Working Conditions • Maintenance Shop environment with dust, dirt and grease conditions, • Ability to work under all weather conditions, • Ability to lift a minimum of 50 pounds All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status. First is also committed to providing a drug-free workplace. First will consider for employment qualified applicants with criminal histories consistent with the requirements of the San Francisco Fair Chance Ordinance, Los Angeles Fair Chance Ordinance, and any other fair chance law. Philadelphia's Fair Criminal Record Screening Standards Ordinance Poster is at this link or upon request .

Job DescriptionDescription: About Us Vantage Auto is a family-owned and operated dealership and service center known for our passion for unique, high-quality vehicles. From modern luxury cars to rare classics, we work on a wide variety of makes and models—no two days are ever the same. Our commitment to excellence, personalized customer service, and a tight-knit team culture set us apart in the industry. Position Overview We are seeking an experienced Automotive Mechanic to join our growing team. The ideal candidate is skilled, reliable, and passionate about cars. You'll be working on a diverse range of vehicles—everything from European luxury sedans to vintage Japanese coupes. If you take pride in your work and want to be part of a company that values craftsmanship and integrity, we want to hear from you. Responsibilities • Diagnose and repair a wide variety of vehicles with precision and efficiency, • Perform routine maintenance including oil changes, brake service, and inspections, • Troubleshoot mechanical and electrical issues using diagnostic tools, • Maintain clean, organized, and safe work environment, • Communicate clearly with service writers and team members about job status and requirements, • Stay current with manufacturer and industry service standards Requirements • Minimum 3 years of professional automotive repair experience, • Strong diagnostic and mechanical skills across multiple vehicle brands, • Ability to work independently and as part of a team, • Valid driver’s license and clean driving record, • ASE Certification preferred but not required, • Passion for unique and high-end vehicles a big plus What We Offer • Competitive compensation based on experience, • Family-oriented work environment with supportive management, • Opportunities to work on rare, collector, and luxury vehicles, • Access to modern equipment and tools, • Career growth opportunities in a thriving automotive businessRequirements:

Field Service Technician Mechanic or Forklift Mechanic Technician Newark, NJ areas THE POSITION: • Seeking to hire experienced Forklift Mechanic, Forklift Technician, Heavy Equipment Mechanic, Mobile Heavy Equipment Mechanic or Field Service Technicians, • Due to growth, we are hiring all experience level forklift mechanics to service our customers in the NY, NJ and Eastern, PA areas. This is a full-time, benefited position QUALIFICATIONS: • Prefer 1 or more years' experience as a heavy equipment mechanic or related mechanic jobs, • Valid Driver's license with a good driving record, • Certified Mechanic or Technician is a plus BENEFITS OFFERED: • Offer a $1,000 signing bonus for forklift mechanics certified on competitive equipment!, • Union Pension Plan, • Medical, Dental, Vision benefits available, • Vacation Time, • Retirement Plan Opportunities, • Overtime Opportunities, • Competitive wages, • Supplemental Pay (bonus pay, commission pay, signing bonus) Starting Range: $18-32 per hour We are an equal opportunity employer, and we are an organization that values diversity. We welcome applications from all qualified candidates, including minorities and persons with disabilities. req22-01201

THE ROLE The Maintenance Mechanic is responsible for equipment and systems maintenance at our facility. Safety is our top priority at Haydon Corporation. All associates are required to follow and comply with all safety rules and guidelines. Responsibilities include, but are not limited to: • Diagnose and repair mechanical problems., • Communicate daily with your direct supervisor and maintenance leadership regarding your assignments and the current statuses of machines., • Provide regular and consistent updates on machine conditions, maintenance progress, and any issues that may impact production., • Inspect A/C motors, gearboxes, presses, resistance welders, and other roll forming equipment., • Support changeover process for welders, mills, secondary punch machines, and specifically to California rooftop press., • Perform preventive maintenance on machines., • Suggest improvements and enhancements to the preventive maintenance schedule for machines., • Provide timely updates on scheduled preventive maintenance activities to avoid major downtime., • Replace worn parts and fluids as needed., • Test and adjust components to ensure proper operation., • Maintain accurate records of repairs and maintenance., • Identify critical spares and consumable parts that need to be purchased., • Conduct regular inspections of machines, following standard operating procedures (SOP), and instructions., • Consult manuals and seek clarification when necessary to ensure proper operation and maintenance of machines., • Continuously monitor production line efficiency. Promptly engage with the operations and production teams to address and resolve issues that require attention., • Respond promptly to requests and inquiries from your maintenance leadership regarding production lines and any issues on the line., • Ensure timely communication is provided to prevent misunderstandings and minimize any machine downtime., • Prepare and provide reports and updates as required by your leader and management. Share insights and information relevant to machine performance and maintenance activities., • Collaborate with your leadership to understand and execute assignments that align with your skillset and expertise. Report on the progress of assigned tasks and responsibilities., • Proficiency in using hand and power tools., • Perform general maintenance work on buildings as assigned., • Have basic understanding of Human Machine Interface (HMI) to assist and help with troubleshooting. Professional Qualifications • Commitment to safety and to adhere to all safety rules., • Knowledge of environmental regulations, adherence to applicable safety protocols., • 6+ years of repairing/maintaining manufacturing equipment., • Experience specifically with presses and mills., • Experience with welding and making minor repairs and/or adjustments., • Comprehension of single and 3 phase power requirements., • Comprehension of machinery electrical requirements., • Comprehension and experience with hydraulic systems including maintenance and troubleshooting., • Knowledge of PLCs (Programmable Logic Controllers), basic understanding of function and operation., • Able to work in a fast-paced environment and ensure accuracy., • Demonstrates ability to work in team, treat colleagues with respect and has a high level of accountability / punctuality., • Proven record of strong attendance., • Demonstrated oral and written communication skills.

Job Description We're looking for Paintless Dent Repair Technicians with a minimum of 3 years of professional automotive PDR experience to join us at Carvana - the fastest-growing used automotive retailer in U.S. history, and one of the four fastest companies to make the Fortune 500. As a Mid-Level PDR Technician, you'll be expected to have experience accessing panels, use glue-pulling techniques, and repair smaller-sized dents on both steel and aluminum vehicle panels. At Carvana, you'll receive a competitive wage and amazing perks – including a 401(k) with Carvana match and even a vehicle purchase discount – all while using state of the art tools in one of our high-tech Inspection Centers (click here to learn more). If you're joining us in an entry-level position, we offer training programs to make sure your skills and pay progress along with the company. Other perks of the Job • 100% company-paid healthcare premiums, • Generous paid-time off and your birthday is a holiday!, • ASE and tool reimbursement programs We also have a variety of other automotive roles available in one of our 18 locations across the country – take a look at our Careers site to apply for one of the following roles: • Auto Body roles: Paint, Prep/Body work, Wheel Repair, Airbrush, Interior Repair, Glass Repair, and PDR (Paintless Dent Repair) roles, • Auto Technician/Mechanic roles: Lube and Oil, Inspection, Brake and Tire, Mechanical Repair / Build, and Master Technician roles, • Ability to physically operate vehicle equipment and tools - must be able to lift up to 60 pounds independently, • Must be at least 18 years of age and possess a valid driver's license. Some positions may be subject to an Motor Vehicle Records (MVR) check, • An ability to work in a fast-paced, ever-changing production environment while sometimes being exposed to excessive weather conditions (heat/cold) To make sure our cars are in first-rate condition, we've built multiple vehicle Reconditioning Centers around the country, where our cars are inspected, perfected, and photographed before reaching the Carvana website. Think you've got what it takes to join our team? Apply today! Carvana is an equal employment opportunity employer. All applicants receive consideration for employment without regard to race, color, religion, gender, sexual orientation, gender identity or expression, marital status, national origin, age, mental or physical disability, protected veteran status, or genetic information, or any other basis protected by applicable law. Carvana also prohibits harassment of applicants or employees based on any of these protected categories. Hiring is contingent on passing a complete background check. This role is not eligible for visa sponsorship. Must be at least 18 years of age and possess a valid driver's license. Must be able to read, write, speak and understand English.

Job Description A Metal Shop in Paterson, NJ is looking for a Sheet Metal Mechanic experienced in Fabricating and Assembly of Stainless Steel Equipment, Shear, Punching and Notching

Job Description Residence Inn by Marriott-Wayne, 30 Nevins Road, Wayne, NJ 07470 We are currently looking for an experienced Chief Engineer to join our Team! Our Residence Inn® by Marriott in Wayne, with 118 full suites, is nestled in a peaceful corner of northern New Jersey. When our guests visit William Paterson University or attend a wedding at The Brownstone or The Tides Estate, there’s no closer hotel. Ice . We are an extended stay hotel, and our suites have full kitchens including a fridge, microwave, and utensils. A great place to stay, a great place to work. The Residence Inn is one of the 50 hotel properties owned and managed by the award-winning hotel management company, Buffalo Lodging Associates. Buffalo Lodging Associates, a hotel management company based out of Canton, MA has put an emphasis on true hospitality since being founded in 1996. While building an extensive portfolio of 50 hotels, we’ve partnered with the most respected hotel brands in the business including Marriott International, Hilton Worldwide, InterContinental Hotels Group, Choice Hotel International and Radisson Hotels. The core and heart of our company lies within our dedicated associates, for we wouldn’t be an award-winning company without each and every one of them. A GROWING HOTEL MANAGEMENT COMPANY – COME JOIN US! We value our associates with competitive compensation plans and other benefits and perks. Some of these benefits include: • Weekly pay, • Paid vacation, sick days and holidays, • Medical, dental, vision insurance, • 401K Retirement plan with company match, • Travel discounts on our branded properties The Chief Engineer takes ownership and pride in the maintenance of the property, while fostering the Buffalo Lodging Associates (BLA) culture and values- Excellence, Passion, Integrity, Inclusive. Responsibilities include: • Creating a safe and appealing property by completing routine preventative maintenance on laundry equipment, heating and air conditioning units, ice machines, fire extinguisher, fire and smoke alarms, lawn sprinkler, lawn equipment, exercise equipment and plumbing, • Maintaining work order assignment boards and tracking completed/pending work orders I and following up on all incomplete work orders to inform the requesting guest or department of the status., • Evaluating and selecting quality vendors that are reliable and provide good value for their price, • At least three years of supervisory or lead mechanic experience in a hotel or related field, • Demonstrated general mechanical skills are necessary, • Basic repair, painting, wall covering HVAC, electrical work, plumbing, boiler operation, pool maintenance and general maintenance skills required, • Vocational training is preferred but not required

Job Description The Company is a leader in the solid waste collection, hauling, and disposal industry. The Fleet and Maintenance Manager is responsible for the Company’s fleet of over 100 trucks, yellow-iron, equipment, and other vehicles. The Fleet and Maintenance Manager promotes a proactive, efficient, and service-oriented program aimed at maintaining the Company’s fleet in peak operating condition. He/She provides management and hands-on direction to the Maintenance Team, including direct supervision of maintenance personnel. The Fleet and Maintenance Manager is responsible for replacement schedules, preventative maintenance and repair of Company vehicles, as well as administrative duties, such as parts procurement, inventory management, asset tracking, and cost control. The Fleet and Maintenance Manager utilizes fleet management and onboard computing software to monitor vehicle performance and cost. Additional Responsibilities • Schedule and oversee all planned repair work to increase productivity and allocate resources appropriately., • Maintain an on-going preventative maintenance program, including, identifying trends in road calls, breakdowns, and maintenance needs., • Direct and coach the Maintenance Team to ensure that all maintenance and repairs are performed in a safe, efficient, and timely manner., • Supervise maintenance employees including coaching and counseling on performance and corrective actions as necessary. Render hiring/termination decisions in collaboration with HR and senior management., • Ensure adequate staffing and proper training of the Maintenance department. Identify maintenance employee training requirements and ensure successful completion., • Monitor the overall performance and efficiency of the Maintenance department and take appropriate actions to increase efficiency and effectiveness., • Accountable for fleet and maintenance budget, including the control of maintenance costs, staff, purchasing, inventory, and outsourcing of repairs., • Ensure compliance with Company safety standards, as well as federal and state regulations, including maintenance and repair records and other required documentation., • Maintain advanced knowledge of engine, emission systems, transmission, brake, hydraulic and electrical systems of heavy equipment and vehicles used by the Company, as well as compliance with changes to federal and state regulations., • 10+ years of maintenance/mechanic experience or operational management experience., • 3+ years of experience as a Maintenance Manager or Maintenance Supervisor for a large fleet of vehicles or multiple site locations, or as a Fleet Manager for a medium to large fleet of heavy equipment and yellow iron., • Experience with and knowledge of hydraulic systems, electrical systems, air brake systems, diesel engines, and vehicle computer diagnostics, • Advanced experience working with fleet management and onboard computing software, • Proficient knowledge of Microsoft Office Suite, • Strong communication and leadership skills, excellent time management and organizational skills with the ability to multi-task in a fast-paced environment., • Ability and passion for coaching, mentoring and training employees., • Strong financial acumen and ability to manage to a budget, • Experience working in the refuse industry strongly preferred, • Strong knowledge of DOT, OSHA, and other federal and local regulations and requirement, • Excellent safety record

Job DescriptionAbout the Opportunity: Are you an experienced AOG Mechanic looking for a dynamic and impactful career move? Our client, a leader in the aviation industry, is seeking driven professionals to join their Mobile Service Unit (MSU) team. In this pivotal role, you'll ensure undelayed aircraft operations by providing swift on-site maintenance services for business and corporate aviation platforms. This 7-on/7-off rotational position ensures a work-life balance with guaranteed 80 hours per week. Your expertise will directly support operational uptime across diverse aircraft models like Gulfstream, Bombardier, and Cessna. Responsibilities: * * Deploy rapidly to AOG events to deliver high-quality field maintenance. * Diagnose and resolve discrepancies in full compliance with FAA and OEM standards. * Engage customer-facing communications to manage expectations and timelines. * Document maintenance accurately using internal systems. * Maintain equipment readiness, ensuring your AOG vehicle, tools, and inventory are optimal. * Exhibit professionalism and customer service excellence on-site. * Prioritize safety and regulatory adherence in all duties. Requirements: * * Valid FAA Airframe & Powerplant (A&P) Certificate. * 5+ years of aircraft maintenance experience, with recent AOG/field service expertise preferred. * Experience with platforms such as Gulfstream (GIV–G700), Bombardier, Cessna Citation series, King Air 90/200/350, or Embraer. * Valid driver's license and capacity to travel on short notice. * Lift up to 50 lbs and work effectively in challenging environments. * Authorized to work in the U.S. with requisite identification. * Completion of a comprehensive background check and pre-employment drug test. * Participation in Anti-Drug and Alcohol Misuse Prevention Program. Benefits & Perks: * * Enjoy a straightforward 7-on/7-off schedule with guaranteed 80 hours of work weekly. * Receive a daily per diem during field assignments for added financial benefit. * Company perks include uniforms, tools, a laptop, and a fully stocked MSU truck. * Full benefits package, including 401(k), supports your long-term professional growth. Why Apply Through Total Aviation Staffing? Total Aviation Staffing connects aviation professionals with top-tier opportunities across the industry. Whether you’re looking for roles in: * Commercial Aviation – Passenger airlines, cargo operations, and aircraft leasing * Business & General Aviation – Corporate jets, charter services, and private aviation * MRO & Aftermarket Services – Aircraft maintenance, repair, overhaul, and parts distribution * Aerospace & Defense – Military aviation, space systems, and defense programs * Aviation Technology & Manufacturing – OEMs, avionics, propulsion, and emerging technologies Even if this role isn’t the perfect fit, applying with us gives you access to multiple career opportunities that may not be publicly advertised. * Work with top companies in aviation and aerospace. * Get priority access to multiple job openings. * Receive expert career guidance from specialized aviation recruiters. Apply today to take the next step in your aviation career.

Job Description We're looking for paintless dent repair technicians with a minimum of 5 years of professional automotive PDR experience to join us at Carvana - the fastest-growing used automotive retailer in U.S. history, and one of the four fastest companies to make the Fortune 500. As an Experienced PDR Technician, you'll be expected to use advanced glue-pulling techniques, hail repair, repair creases and body lines, and repair larger-sized dents on both steel and aluminum vehicle panels. At Carvana, you'll receive a competitive wage and amazing perks – including a 401(k) with Carvana match and even a vehicle purchase discount – all while using state of the art tools in one of our high-tech Inspection Centers (click here to learn more). If you're joining us in an entry-level position, we offer training programs to make sure your skills and pay progress along with the company. Other perks of the Job • 100% company-paid healthcare premiums, • Generous paid-time off and your birthday is a holiday!, • ASE and tool reimbursement programs We also have a variety of other automotive roles available in one of our 18 locations across the country – take a look at our Careers site to apply for one of the following roles: • Auto Body roles: Paint, Prep/Body work, Wheel Repair, Airbrush, Interior Repair, Glass Repair, and PDR (Paintless Dent Repair) roles, • Auto Technician/Mechanic roles: Lube and Oil, Inspection, Brake and Tire, Mechanical Repair / Build, and Master Technician roles, • Ability to physically operate vehicle equipment and tools - must be able to lift up to 60 pounds independently, • Must be at least 18 years of age and possess a valid driver's license. Some positions may be subject to an Motor Vehicle Records (MVR) check, • An ability to work in a fast-paced, ever-changing production environment while sometimes being exposed to excessive weather conditions (heat/cold) To make sure our cars are in first-rate condition, we've built multiple vehicle Reconditioning Centers around the country, where our cars are inspected, perfected, and photographed before reaching the Carvana website. Think you've got what it takes to join our team? Apply today! Carvana is an equal employment opportunity employer. All applicants receive consideration for employment without regard to race, color, religion, gender, sexual orientation, gender identity or expression, marital status, national origin, age, mental or physical disability, protected veteran status, or genetic information, or any other basis protected by applicable law. Carvana also prohibits harassment of applicants or employees based on any of these protected categories. Hiring is contingent on passing a complete background check. This role is not eligible for visa sponsorship. Must be at least 18 years of age and possess a valid driver's license. Must be able to read, write, speak and understand English.

Job Description GAL AeroStaff Ltd. is an aerospace staffing company specializing in temporary and permanent staffing for general and technical positions in the aviation and aerospace industry. In keeping with this goal, each benefit program has been carefully devised. These benefits include time-off benefits, such as vacations and holidays, and insurance and other plan benefits. We are constantly studying and evaluating our benefits programs and policies to better meet present and future requirements. Job Summary: We are seeking a skilled and reliable AOG Mechanic to join our team in the aviation industry. The AOG Mechanic will be responsible for providing immediate, on-site maintenance and repair services for aircraft that are grounded due to technical issues. This role requires exceptional technical knowledge, problem-solving skills, and the ability to work efficiently in time-sensitive environments to minimize aircraft downtime and ensure the safety and compliance of the aircraft. Key Responsibilities: • Respond promptly to AOG situations, ensuring quick and efficient repairs to minimize aircraft downtime., • Perform troubleshooting, diagnostics, and repairs on various aircraft systems, including engines, avionics, hydraulics, electrical systems, and airframes., • Ensure that all work is performed in compliance with FAA regulations and company policies., • Communicate with dispatch, maintenance control, and other departments to coordinate resources and provide updates on AOG situations., • Complete necessary documentation, including work orders, repair logs, and compliance paperwork, as per company and regulatory requirements., • Collaborate with other mechanics and engineers to ensure that repairs are completed correctly and safely., • Maintain a clean, organized, and safe work environment at all times., • Assist with routine scheduled maintenance and inspections when not involved in AOG situations., • FAA Airframe and Powerplant (A&P) License required., • Minimum of [6] years of experience as an aircraft mechanic, with a focus on AOG or emergency repair situations., • Strong knowledge of aircraft systems, troubleshooting, and repair techniques., • Ability to read and interpret technical manuals, blueprints, and schematics., • Proficiency with hand tools, power tools, and diagnostic equipment., • Ability to work well under pressure and in time-sensitive situations., • Excellent communication and teamwork skills., • Availability for on-call shifts, overtime, and travel as needed for AOG situations., • Experience working on Bombardier, Regional CRJ 200., • Additional certifications or training in specialized aircraft systems or maintenance areas., • Ability to lift up to 50 pounds and perform physical tasks such as climbing, kneeling, and crouching., • Ability to work in a variety of environmental conditions, including extreme weather or confined spaces.

Job Description Job Description: We are seeking a mechanic to repair and maintain diesel engine industrial trucks according to dealership and factory specifications. Individual must have electrical troubleshooting skills and strong computerized electrical system diagnostic capabilities Responsibilities: • Performs work as outlined on repair order with efficiency and accuracy, in accordance with dealership and factory standards., • Diagnoses cause of any malfunction and performs repair., • Examines assigned vehicle to determine if further safety or service work is required or recommended., • Documents all work performed and recommended on the repair order., • Participates in manufacturer sponsored training programs, schools, and events., • Keeps abreast of manufacturer technical bulletins., • Maintains and is accountable for all dealership-owned tools and manuals. Returns them to the proper place and in the same condition as when they were received., • Understands, keeps abreast of, and complies with federal, state, and local regulations, such as hazardous waste disposal, OSHA Right-to-Know, etc., • Operates all tools and equipment in a safe manner., • Computer skills, including, but not limited to: Microsoft Office, • CDL is a plus, • Must have own tools, • Be motivated, proactive, focused and well organized, • Maintain high level of professionalism, • At least 3 years of experience or more Gabrielli Truck Sales is an Equal Opportunity Employer. We value a diverse and inclusive working atmosphere. In furtherance of our culture, all qualified applicants will receive consideration for employment without regard to pregnancy, race, national origin, gender, age, religion, disability, sexual orientation, veteran status, marital status or any other characteristics protected by law. Gabrielli Truck Sales provides reasonable accommodations for employees and applicants with disabilities or pregnant consistent with applicable law. If you need a reasonable accommodation during the application process, please let us know. Benefits: • Medical and Dental plan, • Paid Holidays, • Paid vacation and sick/personal time, • 401k with an employer match, • EMPLOYER Paid Life insurance benefit, • Gym Reimbursement program

Job Description GOJET AIRLINES - A&P LICENSED MAINTENANCE TECHNICIAN LOCATION - NEWARK, NJ The GoJet Airlines' A&P Maintenance Team plays a vital role in ensuring the safety of our passengers and is a key driver of the airline's operational performance. We are looking for highly qualified, Licensed Mechanic Technicians to fill positions at our Chicago-O'Hare International Airport Line Maintenance Base. As an A&P Licensed Maintenance Technician at GoJet Airlines, you will be responsible for the inspection, repair, and maintenance of our aircraft to ensure they meet the highest standards of safety and performance. You will work closely with other maintenance personnel to troubleshoot and resolve issues, perform routine inspections, and comply with all regulatory requirements. QUALIFICATIONS/REQUIREMENTS: • Must hold an FAA Airframe and Power plant license, • Legal right to work in, and travel freely in and out of, the United States, • Must possess a minimum of high school diploma or equivalent, • Must possess a valid driver‘s license, • Legally operate company vehicles and equipment with no restrictions, • Must be able to provide your own tools, • FCC License Helpful, but not required, • DOT required pre-employment drug test, • TSA required fingerprint check for Criminal History Records Check, • Must be able to work any shift, • Must be able to read and converse fluently in English, • Must be able to lift 50 lbs., • Able to stand for extended periods of time, • Able to climb stairs, ladders, and work platforms, • Aircraft Maintenance:, • Perform scheduled and unscheduled maintenance on aircraft, including engines, landing gear, avionics, and other critical components., • Conduct thorough inspections to identify and address potential issues before they become problems., • Troubleshooting and Repairs:, • Diagnose and troubleshoot mechanical and electrical problems, using technical manuals and sophisticated diagnostic equipment., • Repair or replace defective parts, ensuring all work is completed to regulatory and company standards., • Compliance and Documentation:, • Ensure all maintenance activities comply with FAA regulations, company policies, and industry standards., • Accurately document all maintenance work performed, including parts used, repairs completed, and inspections conducted., • Collaboration and Communication:, • Work closely with other maintenance technicians, engineers, and flight operations personnel to ensure seamless and efficient aircraft operations., • Industry leading pay scale $26.71/hr -$49.20/hr • Generous annual pay increase, • Performance bonuses, • Health, dental & life Insurance, • 401(k) retirement plan, • Airline travel benefits GoJet Airlines operates as a regional partner for United Airlines, providing daily flights across the U.S. and Canada. Our commitment to safety, customer service, and operational excellence has established us as a leader in the regional airline industry. Join our team and be a part of our exciting journey in the aviation world!

Job DescriptionTo Apply for this Job Click Here Elevate your career as an A&P Technician/Mechanic in a fast-paced aerospace setting, upholding aircraft integrity and expanding your professional expertise. A&P Technician/Mechanic Benefits • Robust health, dental, and vision plans with 75–100% employer-covered premiums, • Highly competitive incentive programs that recognize and reward excellent performance, • 401(k) with a 3% company match after one year of service, • Two weeks of accrued paid time off, 10 paid holidays, and ongoing training to foster growth A&P Technician/Mechanic Responsibilities and Requirements • Adhere to 14 CFR Part 145 standards and maintain a well-organized, safe work environment, • Verify equipment calibrations, conduct inspections and repairs using current technical documentation, and meticulously log all work performed, • Correctly handle and store aircraft components throughout repairs and installations, • Immediately communicate any discrepancies or un-airworthy conditions to management and complete necessary sign-offs Our company was built on service, and as we have grown and expanded into a broad range of industries and specialties, that hospitality mentality has remained rooted at the core of everything we do. We are committed to providing highly personalized services, tailored to each candidate and client we work with. Across all business types, from executives to operators to administrative staff, each Goodwin Recruiting partner has an extensive background in their field of expertise. We speak your language, we know the ins and outs of recruiting, and we put our core values first, establishing game-changing partnerships with employers and job seekers alike.Goodwin Recruiting (Forbes America's Best Recruiting Firms 2020, 2021, 2022, & 2023) is a full-service recruiting agency that was founded in hospitality. \r\n\r\nOur company was built on service, and as we have grown and expanded into a broad range of industries and specialties, that hospitality mentality has remained rooted at the core of everything we do. \r\n\r\nWe are committed to providing highly personalized services, tailored to each candidate and client we work with. Across all business types, from executives to operators to administrative staff, each Goodwin Recruiting partner has an extensive background in their field of expertise. We speak your language, we know the ins and outs of recruiting, and we put our core values first, establishing game-changing partnerships with employers and job seekers alike.

Job Description Triad Service Center is seeking a qualified Field Technician for service and repair of light industrial equipment in the Paterson, NJ area. Equipment that is commonly worked on are floor scrubbers, sweepers, handicapped carts, checkout lanes, paint shakers and other commercial customer equipment found in large retail / industrial locations. Technicians will also install, and service grease containment units used in conjunction with deep fryers. This position would utilize a company vehicle regionally and therefore require a valid, good standing driver’s license. The position would be primarily Monday-Friday, averaging 40 hours a week. Vehicle, tablet, cell phone, PAID TRAINING provided. Starting Pay Range: $20-$27. Our Technicians Typical Duties, Tasks, and Responsibilities: • Have Strong mechanical aptitude with the ability to diagnose, repair and complete both service calls and scheduled PMs on light industrial equipment is essential for our mechanics., • Successfully provide customer service by performing on-location preventative maintenance and repairs on customer equipment by performing job duties., • Visually inspects, tests, and listens to machines and equipment to locate causes of malfunctions. As well as dismantles machine parts to detect wear, misalignment, or other problems., • Installs new or repaired parts; clean and lubricates shafts, bearings, gears, belts, and other parts of machinery., • Staying organized by scheduling repairs and PM’s in similar locations on the same day, as time and location permits. Record keeping and reporting of work orders, parts, supplies ordering, and a daily agenda., • Travel can be up to an average of 300 miles per day, • The associate must regularly lift and/or move up to 10 to 50 pounds and frequently lift and/or move up to 100 pounds., • Frequent exposure to moving mechanical parts, risk of electrical shock, fumes or airborne particles, and toxic or caustic chemicals., • Typically, Monday through Friday. Weekends and after hour work is possible provided customer is willing to pay emergency rates. On call status ends at 11 am EST on weekends and holidays, • Safety and Security – Observes safety and security procedures; reports potentially unsafe conditions; uses equipment and materials properly, • Medical, Dental, and Vision Coverage, • Flexible Spending Account – Medical and Dependent Care, • 401K Plan with Company Match, • Company Paid Life Insurance & Voluntary Life Insurance Options, • Company Paid Short-Term Disability Benefits & Voluntary Long-Term Disability Benefits, • Paid Holidays and Paid Time Off Find out more: Powered by JazzHR xXcXER8uqa

Job Description POSITION SUMMARY: Perform corrective and preventative maintenance as directed to maximize equipment up time and minimize equipment downtime. Respond to requests for maintenance. Troubleshoot and correct equipment problems. Inform maintenance Team Leader when additional resources are required. Complete daily inspections in accordance with company policy. Unsecure and secure the plant as needed. Complete all paperwork required on a daily basis. Performs additional tasks as required to accomplish goals. DUTIES AND RESPONSIBILITIES: • Perform corrective and preventative maintenance., • To ensure the Food Safety and Quality Culture plan is followed according to plan as is directed by the Operation Manager., • Respond to requests for maintenance., • Diagnose mechanic, electrical, or instrumental problems and make necessary repairs. This can include adjustment, parts replacement, lubrication, tear down, rebuilding, and other repairs., • Complete daily inspections in accordance with company policy., • Complete required daily paperwork., • Additional duties as assigned., • Must have personal toolbox & tools. EDUCATION, EXPERIENCE AND SKILLS REQUIRED: • High School Diploma or Equivalent, • Minimum two years’ experience as Maintenance Mechanic in an Industrial environment, • Must be able to troubleshoot, use hand tools, experience with welders is a plus, torches, meters, various hand and power tools, drill press, hand truck, forklift, basic blueprint and schematic reading, basic shop math, and basic understanding of mechanical and electrical systems., • Must be able to work 2nd or 3rd shift including overtime and some weekends. PHYSICAL REQUIREMENTS: • Climbing, Balancing, Stooping, Crouching, Crawling, Standing, Walking, Pulling, Pushing, lifting up to 50 pounds of force occasionally, Fingering, Grasping, Talking, Hearing, and Repetitive Motions. WORK ENVIRONMENT: The worker is subject to both indoor and outdoor environmental conditions. The worker is subject to noise: There is sufficient noise to cause the worker to shout in order to be heard above the ambient noise level. The worker is subject to vibration: Exposure to oscillating movements of the extremities or the whole body. The worker is subject to hazards: Includes a variety of physical conditions, such as proximity to moving mechanical parts, electrical current, working on scaffolding and high places when needed, exposure to high heat, extreme cold or exposure to chemicals. The worker is subject to atmospheric conditions. One or more of the following conditions that affect the respiratory system or the skin: Fumes, odors, dusts, mists, gases or poor ventilation. Company DescriptionMany of those employed through JobConnection Services find that their positions are temp-to-hire. Our skilled office staff works to set each employee up for success! We ensure you have a clear picture of the responsibilities of the assignment you are going to, and work as a liaison between you and the client. A personal relationship that includes constant communication with our clients makes for a pain‐free temporary or permanent placement process - and that translates to happy employees! Stop in today - and feel free to bring a friend along!Many of those employed through JobConnection Services find that their positions are temp-to-hire. Our skilled office staff works to set each employee up for success! We ensure you have a clear picture of the responsibilities of the assignment you are going to, and work as a liaison between you and the client. \r\n\r\nA personal relationship that includes constant communication with our clients makes for a pain‐free temporary or permanent placement process - and that translates to happy employees!\r\n\r\nStop in today - and feel free to bring a friend along!

Job Description About LTS Lohmann: LTS Lohmann Therapy Systems is a premier, global Contract Development and Manufacturing Organization (CDMO) and partner the pharma industry trusts most to deliver innovative oral, transdermal, and intradermal drug delivery systems. From concept to market, launch to lifecycle management, we deliver single source oral and transdermal drug delivery solutions that power partners’ market advantage. Every one of our 1,000 plus members of the LTS family, across three continents, is focused on utilizing our collective strength and innovation to explore new therapeutic opportunities, maximize partner value and improve patient outcomes. We Care. We Create. We Deliver. Job Summary: As a Maintenance Mechanic at LTS Lohmann, you will play a critical role in ensuring the smooth operation of our manufacturing facility. You will perform preventive maintenance, troubleshoot equipment issues, and provide repair and fabrication services. Your expertise will contribute to maintaining optimal production efficiency and product quality. This is a full-time, on-site role located in West Caldwell, NJ. • First shift: 6:15am to 2:30pm (Mon-Fri), • Execute maintenance tasks and preventive maintenance procedures on specialized pharmaceutical manufacturing equipment., • Provide repair, fabrication, and general labor services., • Train team members to enhance knowledge and skills within the maintenance team., • Document work performed and conduct investigations as required., • Analyze equipment issues, develop solutions, and implement corrective actions., • Work collaboratively with the team to optimize production and quality., • Adhere to strict cGMP, FDA, and DEA regulations., • High school diploma or equivalent, • 5+ years of maintenance experience in a manufacturing environment, • Strong mechanical aptitude and problem-solving skills, • Ability to read, write, and communicate effectively, • Proficiency in using various tools and equipment, • Ability to lift up to 49 pounds, • Willingness to work in a controlled environment and wear required personal protective equipment, • Competitive compensation and benefits package, • Opportunities for professional growth and development, • A collaborative and supportive work environment, • The chance to contribute to improving patient lives If this sounds like you, please apply today! Keywords: Maintenance Mechanic, Maintenance Technician, Mechanic, Manufacturing, Pharmaceutical, cGMP, FDA, DEA, repair, fabrication, preventive maintenance, troubleshooting

Job Description Must have strong experience in: • Troubleshooting and repair of manufacturing equipment and facility assets., • Installation of new and used equipment, ancillary machinery, and fixed building assets. Provides emergency/unscheduled repairs of production equipment during production and performs scheduled maintenance repairs of production equipment during machine service (preventative maintenance and unscheduled corrective repairs). * DC and VFD drive programming/setup/troubleshooting. * Control panel modification and system upgrades. * Performs mechanic repairs including, but not limited to, mechanical, electrical, pneumatic, and hydraulic troubleshooting and repair of packaging and productions machines. * Reads and interprets equipment manuals and work orders to perform required maintenance and service. * High school diploma or equivalent, or technical schooling required. * Technical training; exposure to high-speed equipment. * 5 plus years of related experience in packing machines/production machines and industrial 480V-3PH electricity. • Must have competent English verbal and written communication skills to communicate with and comprehend work instructions. Basic computer skills; ability to use tablets for work orders (selection and completion). * Light to moderate physical effort required involving lifting, pulling, pushing and bending. Must be able to lift up to 50 pounds * Regularly required to sit or stand, reach and move about the facility. * Company DescriptionMany of those employed through JobConnection Services find that their positions are temp-to-hire. Our skilled office staff works to set each employee up for success! We ensure you have a clear picture of the responsibilities of the assignment you are going to, and work as a liaison between you and the client. A personal relationship that includes constant communication with our clients makes for a pain‐free temporary or permanent placement process - and that translates to happy employees! Stop in today - and feel free to bring a friend along!Many of those employed through JobConnection Services find that their positions are temp-to-hire. Our skilled office staff works to set each employee up for success! We ensure you have a clear picture of the responsibilities of the assignment you are going to, and work as a liaison between you and the client. \r\n\r\nA personal relationship that includes constant communication with our clients makes for a pain‐free temporary or permanent placement process - and that translates to happy employees!\r\n\r\nStop in today - and feel free to bring a friend along!

Job Description Job Summary We are looking for a skilled Auto Mechanic to maintain and repair vehicles. You will be responsible for troubleshooting issues and fixing them aiming to maximum reliability and functionality. An excellent auto mechanic has good eye-hand coordination and manual dexterity. They are well-versed in complex mechanical or electronical systems of vehicles and have excellent problem-solving abilities. They must also be good communicators. Responsibilities • Inspect vehicle engine and mechanical/electrical components to diagnose issues accurately, • Inspect vehicle computer and electronic systems to repair, maintain and upgrade, • Conduct routine maintenance work (replacing fluids, lubricating parts etc.) aiming to vehicle functionality and longevity, • Schedule future maintenance sessions and advise motorists on good vehicle use, • Repair or replace broken or dysfunctional parts and fix issues (e.g. leaks), • Provide accurate estimates (cost, time, effort) for a repair or maintenance job, • Keep logs on work and issues, • Proven experience as auto mechanic, • Excellent knowledge of mechanical, electrical and electronic components of vehicles, • Working knowledge of vehicle diagnostic systems and methods, • Ability to handle various tools (e.g. pliers) and heavy equipment (e.g. lift), • Willingness to observe all safety precautions for protections against accidents, dangerous fluids, chemicals etc., • Excellent physical condition, • High school diploma is preferred; Certification from a vocational school or completion of apprenticeship is preferred, • Valid certification (e.g ASE) is a definite plus

Job Description Company Overview Haddad Plumbing and Heating Inc. has Been in Business for 25 Years Servicing New Jersey, New York City, and Westchester County in Mid-Rise and High-Rise buildings with Exceptional Work and a Proven Track Record. Haddad Plumbing and Heating Inc is looking for an Experienced Shop Mechanic for all Company Vehicles and Equipment. Summary Perform Maintenance and Repairs on Company Vehicles such as Vans and Trucks. Work Involves Diagnosing Mechanical Issues, Conduct Routine Inspections, and Servicing Engines, Transmissions, and Hydraulic Systems; Troubleshooting and Repairing Electrical and Electronic Components; Ensuring all Vehicles and Machinery Operate Efficiently and Safely. Maintain Equipment, Tools, and Supplies to Support the Fleet and Machinery. Essential Functions • Perform Diagnostics and Repairs on Vans, Trucks, and Equipment., • Ensure Work Tickets are Completed for all Vehicles and Equipment., • Perform Routine Maintenance on Our Company Fleet. Required Education and Experience • Experienced in Vehicle, Equipment, and Diesel Maintenance, • Skilled in Heavy Equipment Repairs and Preventive Maintenance, • Strong Troubleshooting and Problem-Solving Abilities, • Detail-Oriented tqslv7bmDs

Job Description Heavy equipment diesel mechanic needed. Immediate Openings!! Must have knowledge of hydraulic systems, electrical systems, and be able to read schematics for both. Experience with medium and heavy duty trucks required. Clean driving record, background check, drug test and physical expected. Applicants must be able to work well with others and have the desire to learn. Major Responsibilities -Vehicle component replacement -Electrical diagnosis and repair -Hydraulic system repairs -Cummins, Cat, and International engine experience preferred Qualifications • High school diploma or equivalent required, • Vocational or Technical certification preferred, • Must have your own tools, • A valid CDL B w/air brake and tanker endorsement preferred, • Must have a Positive attitude and willingness to grow in position Benefits Include health insurance, dental, vision, life insurance, 401K. Salary commensurate with experience. An Affirmative Action/Equal Opportunity Employer. Company DescriptionNational Water Main Cleaning Company (part of the Carylon Corporation) is a leader in the field of environmental maintenance and rehabilitation for the Water & Wastewater Industry in the United States. Our corporation includes over twenty companies that provide various environmental maintenance services all over the United States. A list of services that we provide are as follows: Closed Circuit Television Inspection of sewer or drainpipes and structures. Infiltration/Inflow studies of sewer/drain systems. Trench-less rehabilitation of sewer/drain structures. General contracting of various environmental services.National Water Main Cleaning Company (part of the Carylon Corporation) is a leader in the field of environmental maintenance and rehabilitation for the Water & Wastewater Industry in the United States. Our corporation includes over twenty companies that provide various environmental maintenance services all over the United States. \r\nA list of services that we provide are as follows: \r\nClosed Circuit Television Inspection of sewer or drainpipes and structures. \r\nInfiltration/Inflow studies of sewer/drain systems. \r\nTrench-less rehabilitation of sewer/drain structures.\r\nGeneral contracting of various environmental services.

Job DescriptionSalary: $23-25 per hour Construction material wholesaler has the following opportunity for a team player with motivation to succeed to join our team in Lyndhurst, NJ. We are in search of a Heavy Equipment Mechanic Assistant with a minimum of 2 years experience orrecent trade/vocational school graduate. Requirements: • Repairing and performing preventive maintenance on heavy equipment., • Experience working with excavators, wheel loaders etc., • Experience with screeners, crushers and stackers and major plus., • Hydraulic and electric systems repair and maintenance., • Ability to pass background, motor vehicle, and drug screens., • OSHA 10-Hour, OSHA 30-hour Construction and/or 40-Hour Hazwoper certifications, • Must be fluent in English and Spanish to work efficiently and safely with lead mechanic and yard employees. Medical, Dental, and vision insurance available. Retirement plan.

Job Description Mendon Truck Leasing and Rental, a branch of PETIT FORESTIER GROUP, a full-service leasing and rental company and a leader in the refrigerated fleet market, is searching for full-time Class B Mechanics to work at our Bronx and Newark, NJ and Lakewood, NJ Branches. Mechanic Class B Full Time - Union Local 447 - $35.01/hour Job Summary Under direction of a Supervisor, Lead Technician or an A Technician, a B Mechanic will assist in the repair and diagnosis on all types of trucks and trailers (i.e. industrial trucks, light duty trucks, tank trucks, tractors, tank trailers, etc.) including but not limited to gasoline and diesel engines, overhauls and rebuilding of transmissions and differentials, clutches, starters, alternators, refrigeration systems, air conditioning systems, power steering, electrical systems, wheels, tires, shock absorbers and brake systems, steering gear box, preventative (P.M.) maintenance and all associated component parts. Job Description RESPONSIBILITIES: • Read written job and/or oral job orders and communicate orally, document in writing (including computer documentation) regarding malfunctions, damage and repairs, parts and preventative maintenance required. • Ability to diagnosis and repair most truck and trailer breakdowns., • Be able to repair and rebuild engines with some guidance and direction., • Perform some of the less complicated repairs to transmissions, driveline, and differentials. • Possesses knowledge of and performs repairs to engine accessory components., • Has a general knowledge of, and general proficiency in the repair of steering, suspension, brake systems, frames, axle, electrical, hydraulic and refrigeration systems. • Works with the usual amount of supervision and direction. Requires assistance in unusual or complicated assignments. • Performs road service., • Performs other duties as directed., • Will need normal supervisory and instructional attentions. QUALIFICATIONS: • Must be able to obtain a CDL within 6 months after hire., • Demonstrated ability and experience performing the tasks outlined in the responsibilities detailed above with supervision on all types of trucks and trailers., • High school diploma or equivalent required., • Post-Secondary Degree, Technical Certification, or Vocational Certification is preferred., • Basic tools required., • Ability to communicate effectively., • Knowledge of computers to operate diagnostic test equipment and company software programs proficiently. WORKING CONDITIONS: • Shop, office, yards, vehicle environment, may require lifting of 50 to 75 lbs., • This position requires driving company vehicles. Job Type: Full-time Work Schedule: Monday to Friday Compensation: Hourly $35.01 Location: Openings at our Bronx and Newark, NJ and Lakewood, NJ Branches Benefits: • Dental Insurance, • Vision Insurance, • Health Insurance, • Life Insurance, • Sick Time Off, • Vacations, • Holidays, • Birthday off, • 401(k)

Job DescriptionPosition Description: Electro/Mechanic Company History: Dr. Praegers was founded in 1994 with the mission to bring delicious frozen food to everyone. Its not every day that two heart surgeons get into the food business, but over 20 years ago thats exactly what our dads did. Motivated by what they saw in their practice, our parents set out on a mission to encourage sensible eating. They knew ingredients had to be nutritious and simple, that everything had to be delicious, and that their products needed to be super simple to make. While the world has changed since our little family business first got started, our focus remains true to our dads vision and we work every day to make them proud. To learn more visit: Responsibilities: \tEnsures operation of machinery and mechanical equipment by completing preventive maintenance requirements on motors, pneumatic tools, conveyor systems, and production machines; following diagrams, sketches, operations manuals, manufacturer's instructions, and engineering specifications; troubleshooting malfunctions. \tLocates sources of problems by observing mechanical devices in operation; listening for problems; using precision measuring and testing instruments. \tRemoves defective parts by dismantling devices; using hoists, cranes, and hand and power tools; examining form and texture of parts. \tDetermines changes in dimensional requirements of parts by inspecting used parts; using rulers, calipers, micrometers, and other measuring instruments. \tAdjusts functional parts of devices and control instruments by using hand tools, levels, plumb bobs, and straightedges. \tControls downtime by informing production workers of routine preventive maintenance techniques; monitoring compliance. \tFabricates repair parts by using machine shop instrumentation and equipment. \tMaintains equipment, parts, and supplies inventories by checking stock to determine inventory level; anticipating needed equipment, parts, and supplies; placing and expediting orders; verifying receipt. \tConserves maintenance resources by using equipment and supplies as needed to accomplish job results. \tProvides mechanical maintenance information by answering questions and requests. \tPrepares mechanical maintenance reports by collecting, analyzing, and summarizing information and trends. \tMaintains technical knowledge by attending educational workshops; reviewing technical publications; establishing personal networks. \tMaintains continuity among work teams by documenting and communicating actions, irregularities, and continuing needs. \tMaintains safe and clean working environment by complying with procedures, rules, and regulations. \tContributes to team effort by accomplishing related results as needed. \tTroubleshoot PLC hardware, and programing. \tWorking knowledge of control circuits, software knowledge, and relay logic/schematics. \tAbility and or working knowledge of High voltage power. \tRemove place and or program VFD, HMI, and electrical components as needed. \tMaintain cleanliness of the work area, including sweeping, using a squeegee, and properly disposing of trash, bad product, cardboard, and plastic in designated bins. \tClean up after completing repairs, ensuring equipment and tools are cleaned and properly stored to keep the shop organized and safe. \tRegularly clean and organize maintenance tools and workspaces, especially after repairs, quality issues or equipment servicing to uphold a safe and efficient work environment. Qualifications/requirements \tMin 5 years experience \tTechnical or University degree or on-the-job experience a plus Strong bilingual communication skills (English and Spanish) to effectively interact with a diverse team and workforce \tKnowledge of packing equipment is a plus \tFreezer knowledge a plus \tStrong Sense of Safety \tAbility to walk, bend, stoop, reach, squat and lift up to 50lbs is required. \tColor Vision required. Food safety and quality responsibilities \tEnsure proper functioning of equipment necessary to support proper identification, control, monitoring, and documentation of Critical Control Point \tEnsure quality and safety specifications are met \tDemonstrate food safety and quality, SSOP and GMP policies and procedures \tIdentify employees, processes, and refresher training needed to appropriate management Disclaimer: Employee must be able to perform the essential functions of the position satisfactorily and, if requested, reasonable accommodation will be made to enable employees with disabilities to perform the essential functions of their job, absent undue hardship. Dr. Praeger's Sensible Foods is an Equal Opportunity Employer that does not discriminate on the basis of actual or perceived race, creed, color, religion, alienage or national origin, ancestry, citizenship status, age, disability or handicap, sex, marital status, veteran status, sexual orientation, genetic information, arrest record, or any other characteristic protected by applicable federal, state or local laws. Our management team is dedicated to this policy with respect to recruitment, hiring, placement, promotion, transfer, training, compensation, benefits, employee activities and general treatment during employment. $25.00 - $30.00 Hourly

Job Description We are looking for a Diesel Truck Mechanic to join our team! You will be responsible for repairing various vehicles, engines, transmission systems, dpf systems and all aspects to truck repair and maintenance. Responsibilities: • Repair heavy & medium duty trucks, buses, and other motor vehicles, • Specialize in vehicle engine, transmission, dpf and electrical systems, • Perform routine vehicle maintenance and repairs, • Use diagnostic tools to test vehicle components and perform diagnosis, • 5 + years of diesel mechanic experience, • Must have own tools, • Knowledge of computer diagnostics systems for diagnosing, • Able to diagnose repairs needed via diagnostics and diagnosis, • Knowledge of all shop equipment and Tools, • Strong mechanical aptitude and troubleshooting skills, • Deadline and detail-oriented, • Ability to thrive in a fast-paced environment

Job DescriptionWelcome to WNC, New York’s Industry Leading Hotel Laundry Service.We are a state-of-the-art facility to handle the immense demands of New York most discerning hotels. We are seeking a talented Commercia Laundry Mechanic to join our team.The Commercial Laundry Mechanic has overall responsibility for the daily repair and preventative maintenance of industrial textile processing equipment and facility maintenance. The Commercial Laundry Mechanic ensure that tasks such as start-up and shut-down procedures, electrical troubleshooting, maintaining and operating boilers, welding and cutting, hydraulics, pneumatics, mechanical, or other systems are completed according to policies and procedures. As well as completing daily production workload in a timely manner, consistently providing quality standards in all areas of laundry operations. Duties include but are not limited to: • Maintain, service, and repair all models of commercial laundry equipment including but not limited to washers, driers, ironers, boilers, extractors, presses, stackers, and other machinery used., • Troubleshoot electrical, mechanical, and plumbing, issues and rebuild pumps, valves, regulators as needed while utilizing an excellent understanding of steam/thermal systems., • Diagnoses problems, replaces or repairs parts, tests and makes adjustments., • Inspect, maintain, repair, and service water treatment plant machinery and equipment, including pumps, valves, valve actuators, motors, engines, meters, drives, tanks, reservoirs, compressors, chemical feed and storage systems, UV disinfection systems, heating and air conditioning systems, and other equipment typical of a water treatment facility., • Install and rebuild pumps, motors, piping systems, and specialized water treatment equipment., • Fabricate parts and equipment; operate welding, cutting, and general fabrication equipment., • Pack, lubricate, clean, and paint mechanical equipment and motors., • Inspect newly installed mechanical equipment to ensure safe and satisfactory operation and functionality., • Ensures work is performed safely and efficiently., • Read and interpret technical operation and repair manuals., • Effectively participate with preventive maintenance schedule on all laundry equipment., • Establish an organized laundry inventory system for purchasing of all parts & materials., • Provide technical training to the laundry team. Maintain a constant awareness of safety problems and report unsafe conditions and exposures to laundry manager., • Must understand and adhere to all safety procedures., • Effectively manage daily maintenance requests to minimize equipment down-time and continually improve operational processes., • Strictly adhering to all safety rules, policies and procedures required by Alsco, law, and what is recognized as common practice in the industry., • Keep accurate and timely records of maintenance performed., • Follow written and verbal instructions and perform other tasks as directed by supervision., • Interact with all colleagues in a professional manner, • Comply with all Federal, State and local laws., • Working on boiler and fan systems, • Maintaining logs, records and reports of serviced equipment, • Qualifications:, • Minimum of 3 years hands on experience in a laundry maintenance or similar operation, • Must be able to maintain high levels of confidence., • Maintain a working knowledge of policies and procedures and their proper application., • Minimum of five years maintenance engineering experience with specific knowledge of machinery, electricity, electronics, plumbing, hydraulics, pneumatics, welder and boiler applications., • Quantifiable working knowledge of Weishi systems, dyers, folders, sorting, binding, etc. equipment preferred, • Ability to troubleshoot issues in a timely manner, • Ability to shift priorities and changing demands, • OSHA compliance, • Must be able to stand for long periods of time; able to bend, stretch reach and stoop on a continual basis Typical Physical Activity Standing, sitting, walking, stooping, driving a forklift, working on ladder, being in elevated height to perform work, grasping, moving equipment, pushing, pulling, moving loaded carts weighing up to 500 lbs, reading, speaking, hearing, and lifting up to 60 lbs. Occasionally stoop, bend, kneel, crouch, crawl, reach, and twist; push, pull, lift, and/or carry moderate to moderately heavy amounts of weights; operate assigned equipment and vehicles; ability to verbally communicate to exchange information. Typical Environmental Conditions Inside and outside areas of a typical industrial laundry facility, which includes working with and around large machinery, variations in temperature, noise, odors, humidity, lint and dust, in general offices or on outside grounds. Water treatment plant and field environment; exposure to noise, dust, grease, fumes, gases, potentially hazardous chemicals, electrical energy, and inclement weather conditions, including hot, cold, wet, and/or humid conditions; work around water; work on slippery, uneven, surfaces; work in confined spaces; routinely climb ladders, stairs; regularly work near moving mechanical parts; and work around moderately loud noise levels; incumbents must be available to work variable shifts, including evenings, nights, weekends and holidays.

Job Description EXPERIENCED REEFER TRAILER MECHANIC WANTED Daybreak Express was established in 1980, and keeps on growing while other companies are no longer in business. We stay busy, and you will never be left without work at our company. We currently work with a fleet of about 200 trucks, and hundreds of 53' trailers, and reefers. As well as hundreds of 20' and 40' chassis with Genset reefers. • Assist other mechanics in proper diagnosis of failures and correct repair practices., • Maintains a local terminal's domiciled fleet of trucks, trailers and chassis., • Provide work orders, and invoices to the maintenance office department on a daily basis., • Performs inspections, service, and repairs on dry van trailers, reefer trailers, Chassis, and reefer gensets, • Moves, operates, lifts, stores, and uses specialized equipment, including personal and company hand and power tools, shop machines and measuring devices to perform inspections, adjustments, repair or maintenance work, • Uses diagnostic tools and computer software to assist in troubleshooting and repair of heavy duty braking and electrical systems used on trailers and Chassis, • Utilizes service information from available sources, internet, shop manuals, and industry service bulletins Along with a Competitive salary, the company offers the following: · PTO (Personal time off) · Medical, Dental, Vision · Life insurance · 401K (match) · Direct Deposit Overtime pay after 40 hours Please contact Jose Funes at 973-589-5931 Extension 1127 for further details. Or you can stop by at Daybreakexpress.com 500 Avenue P Newark. NJ 07105 Company DescriptionDaybreak Express is a unique transportation company that is able to adapt according to customer needs. We are large enough to offer a complete range of customized transportation services, but small enough to give you attentive personalized service with 24/7 support. Daybreak combines the stability and sophistication of a large freight carrier with the personal attention and responsiveness of a closely managed business to take the worry and uncertainty out of critical deliveries. We combine technology, security and customer service to closely manage every shipment throughout the supply chain. Daybreak Express understands the importance of on time delivery as well as the effects of a healthy bottom line. We can function as an extension of your traffic and transportation department or as your primary transportation resource. In either case, we can help make your job easier, reduce pressure, increase confidence and save time and money. Call Daybreak Express the next time you need reliable service anywhere in the country or require the precision and timeliness of a critical expedited shipment. Let us show you how much the Daybreak advantage can mean to you.Daybreak Express is a unique transportation company that is able to adapt according to customer needs. We are large enough to offer a complete range of customized transportation services, but small enough to give you attentive personalized service with 24/7 support. Daybreak combines the stability and sophistication of a large freight carrier with the personal attention and responsiveness of a closely managed business to take the worry and uncertainty out of critical deliveries. We combine technology, security and customer service to closely manage every shipment throughout the supply chain. Daybreak Express understands the importance of on time delivery as well as the effects of a healthy bottom line. We can function as an extension of your traffic and transportation department or as your primary transportation resource. In either case, we can help make your job easier, reduce pressure, increase confidence and save time and money.\r\n\r\nCall Daybreak Express the next time you need reliable service anywhere in the country or require the precision and timeliness of a critical expedited shipment. Let us show you how much the Daybreak advantage can mean to you.

Job Description Mendon Truck Leasing and Rental, a branch of PETIT FORESTIER GROUP, a full-service leasing and rental company and a leader in the refrigerated fleet market, is searching for full-time Class C Mechanics to work at our Bronx location. The schedule is Mon-Fri 3:30 pm-12 am. Full Time - Union Local 447 - $33.54/hour Under direction of a Supervisor, Lead Technician or a Class A Mechanic, a Class C Mechanic generally performs minor repairs and all aspects of preventive maintenance on all types of trucks and trailers (i.e., Industrial trucks, light duty truck tank truck, tractor, tank trailers, etc.) RESPONSIBILITIES: • Read written job and/or oral job orders and communicate orally, document in writing (including computer documentation) regarding malfunctions, damage and repairs, parts and preventative maintenance required., • Assists higher level mechanics when and where directed., • Performs simple mechanical repairs as directed by the supervisor or mechanics to whom assigned., • Performs clean-up duties in the shop and yard areas as directed., • Secures parts and tools for mechanic to whom assigned as directed., • May be called upon, to perform any of to perform any of the lesser skilled jobs in the shop and yard area., • Must be able to obtain a CDL within 6 months after hire., • Demonstrated ability and experience performing the tasks outlined in the responsibilities detailed above with supervision on all types of trucks and trailers., • High school diploma or equivalent required., • Post-Secondary Degree, Technical Certification, or Vocational Certification is preferred., • Basic tools required., • Ability to communicate effectively., • Shop, office, yards, vehicle environment, may require lifting of 50 to 75 lbs. Location: Bronx, NY Benefits: • Dental Insurance, • Vision Insurance, • Health Insurance, • Life Insurance, • Sick Time Off, • Vacations, • Holidays, • Birthday off, • 401(k)

Ensure operation of the mechanical equipment and machinery by performing preventative maintenance. Atlantic Coast Recycling is looking to add a Plant Mechanic to the team in Passaic, NJ. Our priority is to make sure we hire mechanics that care about the safety of our drivers and the service provided

HVAC Mechanic I - Engineering & Plant Ops - Per-Diem. Makes recommendations to supervisor in regard to safety and equipment operation procedure. Performs plumbing installation and repair.

As a Power HVAC Mechanic (Service Tech II) within the Power/HVAC division at United Rentals, you'll use your skills to perform maintenance tasks as well as minor repairs on equipment in a safe and professional manner. You will be responsible for the maintenance and repair of diesel engines, HVAC equ

Job Description Responsibilities A Diesel Mechanic is responsible for providing service & repair to our customers' fleet via assigned truck and equipment repairs, while maintaining exceptional customer service. Rush Truck Centers opens the door to the world of opportunity. We are the largest network of commercial vehicle dealerships across the US representing truck and bus manufacturers. Our franchises include Peterbilt, International, Hino, Isuzu, Ford, IC Bus and Blue Bird. We offer a rewarding career as a leader in the transportation industry. Grow with us as we continue to expand our network of locations and services. Responsibilities: • Provide technical service to vehicles and equipment., • Perform general and detailed repair of all trucks, engines and components., • Cleaning, maintenance, visual inspection, and removal of parts and attachments., • Installation with the help of proper manuals, report writing, disassembly, assembly, parts reuse evaluation, and reconditioning., • Overhaul gas or diesel engines., • Install injectors, pistons, liners, cam shafts, cylinder heads, rod and main bearings, oil pans, clutches, fan hubs, differentials, fifth wheels, brakes, change or recharge batteries, and replace transmissions and other parts., • Read job order, observe and listen to vehicle in operation to determine malfunction and plan work procedures., • Examine protective guards, loose bolts, and specified safety devices on trucks, and make adjustments as needed., • Lubricate moving parts and drive repaired vehicle to verify conformance to specifications., • Tag all warranty parts and returns to warranty clerk., • Attend training classes and keep abreast of factory technical bulletins., • Develop and maintain positive relationships with customers to increase overall customer satisfaction. Basic Qualifications: • High school diploma or general education degree (GED), • 5 years’ experience as a Class 7 & 8 technician in a dealership or related truck service facility, • Valid driver license (CDL a plus!) This job posting does not state or imply that these are the only duties to be performed by this employee. The employee will be required to follow any other instructions and to perform any other duties requested by their leader. Total Rewards & Compensation: • We offer an exceptional Total Rewards package with outstanding healthcare benefits, a robust 401(k) plan with company matching, and an employee stock purchase program to help you build long-term financial security. Additionally, we provide performance-based incentives and opportunities for professional growth through ongoing training and development. All of this is within a culture that values and rewards excellence, a positive attitude, and integrity, ensuring you thrive personally and professionally.

Maintains advanced knowledge to diagnose and repair mechanical problems on heavy equipment (heavy equipment includes but not limited to: yellow iron machinery, tractor trailers, forklifts, and other diesel trucks). The Yellow Iron Diesel Technician/Mechanic may be required to lift upwards to 50 poun

Service Desk Level 1 Technician (Windows & Mac) - Open Ended Contract (3+ Years Duration).Are you looking to tackle new challenges and improve your Level 1 Service Desk experience? We have a new exciting opportunity for you.We are currently seeking an eager Level 1 Service Desk Technician (Windows &

Maintains advanced knowledge to diagnose and repair mechanical problems on heavy equipment (heavy equipment includes but not limited to: yellow iron machinery, tractor trailers, forklifts, and other diesel trucks). Our Yellow Iron Diesel Mechanics perform inspection, diagnosis, preventative maintena

Kenworth Northeast Is Hiring Experienced Diesel Mechanics at All Locations!. Our Mechanics Deserve the Best Benefits:. At least 1 year of hands-on experience and on-the-job training in a related mechanical field graduate of vocational courses or equivalent experience and training.

Our Mechanics perform inspection, diagnosis, preventative maintenance, and repair of electrical, hydraulic, suspension, brake and air systems on vehicles and equipment, including diesel heavy trucks and engines. At times, the Mechanic may be on call, and required to assist with emergency breakdowns

Maintain accurate service records, equipment logs, and reports.

Our Diesel Mechanics perform inspection, diagnosis and repair of electrical, hydraulic, suspension, brake and air systems on vehicles and equipment, including diesel heavy trucks and engines. Are you a skilled Diesel Mechanic looking for your next opportunity? Join our team at. Performs preventive m

The Maintenance Mechanic is responsible for equipment and systems maintenance at our facility. Diagnose and repair mechanical problems. Inspect A/C motors, gearboxes, presses, resistance welders, and other roll forming equipment.

Our Diesel Mechanics perform inspection, diagnosis and repair of electrical, hydraulic, suspension, brake and air systems on vehicles and equipment, including diesel heavy trucks and engines. Are you a skilled Diesel Mechanic looking for your next opportunity? Join our team at. Performs preventive m

Our Diesel Mechanics perform inspection, diagnosis, preventative maintenance, and repair of electrical, hydraulic, suspension, brake and air systems on vehicles and equipment, including diesel heavy trucks and engines. Utilizing diagnostic software, the Mechanic is responsible for interpreting failu

Our Diesel Mechanics perform inspection, diagnosis, preventative maintenance, and repair of electrical, hydraulic, suspension, brake and air systems on vehicles and equipment, including diesel heavy trucks and engines. Utilizing diagnostic software, the Mechanic is responsible for interpreting failu

Members get everything they need under one roof robust cardio equipment, coach-led group classes, weightlifting and free weights, martial arts and MMA-inspired fitness training, martial arts equipment, youth programming, personal training, yoga, Pilates, and more!. Maintains the history file on all

Our Diesel Mechanics perform inspection, diagnosis and repair of electrical, hydraulic, suspension, brake and air systems on vehicles and equipment, including diesel heavy trucks and engines. Performs preventive maintenance inspection (PMI); troubleshoots, repairs, and rebuilds major components on v

The Aircraft Mechanic Instructor is responsible for delivering engaging and comprehensive instruction in assigned courses, ensuring that students grasp both theoretical concepts and practical applications in aircraft maintenance. Maintain a clean, organized, and safe classroom and laboratory environ

Our Diesel Mechanics perform inspection, diagnosis, preventative maintenance, and repair of electrical, hydraulic, suspension, brake and air systems on vehicles and equipment, including diesel heavy trucks and engines. Experience working on heavy duty diesel equipment OR training from a recognized t

Clean equipment and facility approximately daily.

Our Diesel Mechanics perform inspection, diagnosis and repair of electrical, hydraulic, suspension, brake and air systems on vehicles and equipment, including diesel heavy trucks and engines. Are you a skilled Diesel Mechanic looking for your next opportunity? Join our team at. Performs preventive m

The CNC Field Service Technician must have or be willing to learn through training on the job and classroom an understanding of mechanical drawings, electrical/pneumatic/hydraulic schematics, PLC ladder diagrams and testing equipment required to effectively diagnose and resolve issues with electrica

Frequent lifting, grasping and carrying materials and equipment up to 50 lbs. Ability to troubleshoot and repair plumbing, electrical, appliances, HVAC equipment (if applicable), and perform interior repairs and painting preferred.

This role includes proactive system troubleshooting, works with mechanical, electrical, diesel equipment conditions, conducts preventative maintenance and parts inventory, and anticipates and corrects safety issues (both Company and Customer owned equipment). We encourage individuals with background

Our Diesel Mechanics perform inspection, diagnosis, preventative maintenance, and repair of electrical, hydraulic, suspension, brake and air systems on vehicles and equipment, including diesel heavy trucks and engines. Utilizing diagnostic software, the Mechanic is responsible for interpreting failu

Operates an electric stand-up forklift to move pallets of merchandise and equipment throughout the warehouse.

Ability to troubleshoot and repair plumbing, electrical, appliances, HVAC equipment (if applicable), and perform interior repairs and painting preferred. Frequent lifting, grasping and carrying materials and equipment up to 50 lbs.

Health Expense Reimbursement program (including gym memberships, equipment, and subscriptions).

If finding an effective fix and supporting customers with the highest level of service standards sounds appealing to you, Canon USA, a leader in technology, solutions, and services, wants to know your story.We're actively seeking a Field Service Technician to deliver amazing experiences and elevated

Maintains Incident and Injury Free safety culture by following all AvalonBay safety policies and procedures and reporting any unsafe behavior or conditions including nonfunctioning equipment. Knowledge of Personal Protective Equipment (PPE) and ability to use properly. Completes assigned service req

Ability to trouble-shoot and solve technical issues by following technical manuals and schematics; Orders necessary parts, tools, and equipment in a timely manner by following company procurement policy; Maintains a proper Daily Schedule Control for equipment maintenance and preventative maintenance

Experience with industrial equipment such as CNC mills, CNC lathes, Robotics, Lasers, Presses, EDM, sealers, process cleaning equipment. Technical electrical and mechanical maintenance on industrial equipment. Technical maintenance activities involve numerous industrial equipment types throughout mu

Clean equipment and facility approximately daily.

PrideStaff is thrilled to partner with a nonprofit family services organization in South Orange to hire a Maintenance Technician who will be essential in maintaining the facility and its equipment in excellent condition!. The Maintenance Technician position is responsible for performing highly diver

Safely drive and operate your delivery vehicle at all times.Use handheld device for routing information, and customer delivery information.Navigate a variety of routes throughout delivery areas.Must be comfortable driving and working in varying weather conditions.Load and unload packages to be deliv

Maintenance Technician III (Washington Dodd Apartments).Carpentry, electrical, HVAC, plumbing, and you! These are some of the most important things we need to maintain our properties and keep our residents happy.If you're looking to make a difference with your technical knowledge and excellent custo

Our delivery drivers are the best and make the most!.Earn up to $18 an hour as a Papa John's Pizza delivery driver.Day shift, night shift, weekday and weekend shifts available.Delivery Driver Benefits include:.Eligibility for medical benefits.Employee discounts on Better Ingredients, Better Pizza!.P

Ability to operate some or all of the following types of equipment: Presses, Laser Turret, Welder, Table Saws, Edgers, Paint Sprayers, Mills and other Manufacturing Equipment as needed. Able to run various different types of equipment. Perform minor adjustments and daily maintenance to equipment.

MARKET ST, Saddle Brook, NJ ID#8b155a4a-4b3c-4755-ac8b-ab45010021c3.Buckle up, hit the open road and start making hungry people happy as a delivery driver for Pizza Hut.That's right, we'll pay you to cruise around in your mobile office - your car - listening to your own tunes and delivering great pi

Focus on the core content of the job post, removing all extra metadata, navigation mentions, and redundant headers.Keep the formatting beautiful and high signal to noise ratio.

Service Desk Level 1 Technician (Windows & Mac) - Open Ended Contract (3+ Years Duration).Are you looking to tackle new challenges and improve your Level 1 Service Desk experience? We have a new exciting opportunity for you.We are currently seeking an eager Level 1 Service Desk Technician (Windows &

Members get everything they need under one roof robust cardio equipment, coach-led group classes, weightlifting and free weights, martial arts and MMA-inspired fitness training, martial arts equipment, youth programming, personal training, yoga, Pilates, and more!. Procures repair parts, materials,

Drive an Amazon-branded vehicle delivering packages to your community.Work 4-5 days per week and up to 10 hours per day with shifts available seven days a week.They offer competitive compensation, benefits, and opportunities for career growth.If you are looking for outstanding pay, flexible part-tim

Parts Authority, founded in 1973, is a leading national distributor of automotive replacement parts, tools/equipment and transmissions.

Drive an Amazon-branded vehicle delivering packages to your community.Work 4-5 days per week and up to 10 hours per day with shifts available seven days a week.They offer competitive compensation, benefits, and opportunities for career growth.If you are looking for outstanding pay, flexible part-tim

Mechanical troubleshooting of industrial ovens/furnaces, packaging machines, food processing equipment. Mechanical maintenance of industrial equipment. Working with hydraulic and pneumatic equipment.

Drive an Amazon-branded vehicle delivering packages to your community.Work 4-5 days per week and up to 10 hours per day with shifts available seven days a week.They offer competitive compensation, benefits, and opportunities for career growth.If you are looking for outstanding pay, flexible part-tim

Buckle up, hit the open road and start making hungry people happy as a delivery driver for Pizza Hut.That's right, we'll pay you to cruise around in your mobile office - your car - listening to your own tunes and delivering great pizza - and pasta.What more could you want? Independence, good music a

Skilled mechanics stand ready to handle RON maintenance, turnaround checks, non-routine discrepancy reports and ground equipment maintenance via scheduled or on-call action. STS Line Maintenance is hiring A&P Mechanics in Newark, New Jersey. Position Overview: STS Line Maintenance is looking for hig

Troubleshoot mechanical, pneumatic, electrical, and plumbing issues. Mechanic maintain, troubleshoot, and repair Manhasset printing presses, Manhasset die cutter, and other production machinery.

Drive an Amazon-branded vehicle delivering packages to your community.Work 4-5 days per week and up to 10 hours per day with shifts available seven days a week.They offer competitive compensation, benefits, and opportunities for career growth.If you are looking for outstanding pay, flexible part-tim

We are looking for reliable delivery drivers, 23 years of age or older with their own vehicle, committed to handling quality deliveries with the utmost care and attention to customer service.Couriers will use their own vehicle to pick up and stage assigned orders from our Kearny warehouse between 6a

Drive an Amazon-branded vehicle delivering packages to your community.Work 4-5 days per week and up to 10 hours per day with shifts available seven days a week.They offer competitive compensation, benefits, and opportunities for career growth.If you are looking for outstanding pay, flexible part-tim

If you're a licensed CDL Driver looking to advance your career with a nationally established company, look no further.ABC Supply, America's largest wholesale distributor of exterior and interior building products, offers professional driving opportunities that allow you to do what you love every day

Drive an Amazon-branded vehicle delivering packages to your community.Work 4-5 days per week and up to 10 hours per day with shifts available seven days a week.They offer competitive compensation, benefits, and opportunities for career growth.If you are looking for outstanding pay, flexible part-tim

Job Location: 0424 Plant 424 Belleville - Belleville, NJ.Education Level: Not Specified.Job Shift: Overnight/Early Morning.Work Schedule: Overnight early morning hours, starting at 1am/2am.Number of shift hours vary by route.This is an entry level non-exempt position that primarily requires driving.

Drive an Amazon-branded vehicle delivering packages to your community.Work 4-5 days per week and up to 10 hours per day with shifts available seven days a week.They offer competitive compensation, benefits, and opportunities for career growth.If you are looking for outstanding pay, flexible part-tim

The CNC Field Service Technician must have or be willing to learn through training on the job and classroom an understanding of mechanical drawings, electrical/pneumatic/hydraulic schematics, PLC ladder diagrams and testing equipment required to effectively diagnose and resolve issues with electrica

Drive an Amazon-branded vehicle delivering packages to your community.Work 4-5 days per week and up to 10 hours per day with shifts available seven days a week.They offer competitive compensation, benefits, and opportunities for career growth.If you are looking for outstanding pay, flexible part-tim

We are Auto-Chlor System! A national leader serving the restaurant and hospitality industries, providing the latest in dishwashers, sanitizing equipment, and cleaning products to our customers.

Must position oneself to install/maintain dental equipment, including under equipment or cabinets up to 50% per day. The core responsibility for a Service Technician Specialist is to work independently on all basic core equipment installs and repairs. Install and/or Repair Dental Equipment:.

Delivery Driver Job Description.If you like working with a fun team, love our queso, have a great personality & enjoy interacting with customers, then come and talk to us about joining the QDOBA family! QDOBA is now hiring energetic, hospitality-oriented individuals!.As our catering delivery driver

Responsible for servicing products and equipment on assigned projects and ensuring customer satisfaction. Maintains equipment by inspecting for signs of wear.

Clean equipment and facility approximately daily.

Lays out and installs piping, equipment, and other mechanical systems incompliance with construction drawings and specifications. Performs complex mechanical installations per engineering direction. Works with Thermal Systems Engineers and Site Construction Manager to order tools, equipment, supplie

Service electromechanical equipment like self-checkout systems within an assigned territory. NCR Voyix is looking for Field Service Technicians! Are you a Field Technician? Field Engineer? Service Technician? Or do you want to start a career in this field? Are you tech savvy with a good mechanical a

Maintain company-required performance and maintenance records for identified equipment.

Now Hiring Delivery Experts with a good driving record, must be at least 18 years old with own CAR and insurance, also Hiring Bikers, must have own BICYCLE (electric style bikes are welcome as well).Delivery Experts receive an hourly wage, a commission, and with awesome Customer service TIPS (option

Delivery Driver Job Duties: Delivers high-quality products to our customers in a safe, courteous, and timely manner.Establishes and maintains outstanding relations with customers.Reviews and verif

KENNEDY BLVD, North Bergen, NJ.Buckle up, hit the open road and start making hungry people happy as a delivery driver for Pizza Hut.That's right, we'll pay you to cruise around in your mobile office - your car - listening to your own tunes and delivering great pizza - and pasta.What more could you w

Ilir Sela started Slice with the belief that local pizzerias deserve all of the advantages of major franchises without compromising their independence.Starting with his family's pizzerias, we now empower over tens of thousands of restaurants with the technology, services, and collective power that o

Compensation: Starting pay $22.Hours: Hours of operation are 9:30 am Reporting Time (Actual time may vary depending upon the route, seasonal demand changes etc), 7 days a week.Benefits of Working at Hain Logistics, Inc:.Competitive wages, PTO and seasonal bonuses.Be part of a local business that is

Bring your energy to the role of Costco Delivery Driver to manage daily responsibilities with a focus on quality and efficiency, gain knowledge of company offerings to better serve clients, and maintain accurate records and documentation.Other duties include assist with organizing, stocking, and gen

Clean equipment and facility approximately daily.

Industrial Maintenance Mechanic Job Duties: Ensures operation of machinery and mechanical equipment by completing preventive maintenance requirements on engines, motors, pneumatic tools, conveyor systems, and production machines

Benefits of Working at [Company Name]:.Competitive wages, PTO and weekly pay.Medical, dental and vision insurance.Tuition reimbursement Be part of a local business that is making a positive impact on the community.As a Delivery Driver at A A Huddle LLC, you will play a crucial role in ensuring order

The CDL A Driver must be able to operate company issued equipment including, but not limited to, material handling equipment, electronic delivery devices, liftgates and refrigerated equipment. Perform Pre and Post trip inspections of equipment.

Clean equipment and facility approximately daily.

Industrial Maintenance Mechanic Job Duties: Ensures operation of machinery and mechanical equipment by completing preventive maintenance requirements on engines, motors, pneumatic tools, conveyor systems, and production machines

Operates a forklift, pallet jack, order picker, reach truck, and other warehouse equipment. Operates any materials handling equipment safely and efficiently as required. Equipment Operator/Im Warehouse Associate.

As a leading global manufacturer of heating, cooling and water heating equipment, we are innovating all-new ways to deliver just the right temperature while saving energy, water and supporting a more sustainable future.

Buckle up, hit the open road and start making hungry people happy as a delivery driver for Pizza Hut.That's right, we'll pay you to cruise around in your mobile office - your car - listening to your own tunes and delivering great pizza - and pasta.What more could you want? Independence, good music a

Deliver materials to the customer, which includes assistance with unloading, ensuring delivery of ticket with material, and collecting payment, if needed.Pick up customer returns, validating product match for credit requests.Perform daily pre-trip Truck Driver, Delivery, CDL, Driver.

Ferguson, a Fortune 500 company, is proud to provide best-in-class products, service and capabilities across the following industries: Commercial/Mechanical, Facilities Supply, Fire and Fabrication, HVAC, Industrial, Residential Trade, Residential Building and Remodel, Waterworks and Residential Dig

The purpose of this job is to perform general warehouse duties ensuring timely receipt and delivery of product.This position is seasonal and expected to be needed from June to October.This position will require stepping in for occasional warehouse Delivery Driver, Warehouse, Driver, Delivery, Music

Benefits of Working at A A Huddle LLC:.Competitive wages, PTO and weekly pay.Medical, dental and vision insurance.Be part of a local business that is making a positive impact on the community.As a Delivery Driver at A A Huddle LLC, you will play a crucial role in ensuring orders are delivered prompt

Ferguson, a Fortune 500 company, is proud to provide best-in-class products, service and capabilities across the following industries: Commercial/Mechanical, Facilities Supply, Fire and Fabrication, HVAC, Industrial, Residential Trade, Residential Building and Remodel, Waterworks and Residential Dig

Safely drive and operate your delivery vehicle at all times.Use a handheld device for routing information and customer delivery information.Navigate a variety of routes throughout the delivery area.Must be comfortable driving and working in varying weather conditions.Load and unload packages to be d

Help us succeed as our next UPS Delivery Driver to perform responsibilities as a Delivery Driver.Work with your team to maintain efficiency and high standards.Deliver outstanding service to customers and colleagues.Perks include competitive pay, flexible scheduling, training opportunities, a support

Join our growing team as a FedEx Delivery Driver to perform responsibilities as a Delivery Driver.Stay adaptable to changing priorities and business needs.Stay adaptable to changing priorities and business needs.Perks include competitive pay, flexible scheduling, training opportunities, a supportive

Mechanical skills (Use of hand tools. Perform basic adjustments to the equipment to keep the lines moving Assist to troubleshoot all magazine assemble issues.

Industrial Maintenance Mechanic Job Duties: Ensures operation of machinery and mechanical equipment by completing preventive maintenance requirements on engines, motors, pneumatic tools, conveyor systems, and production machines

Clean equipment and facility approximately daily.

Safely assist in the loading and unloading of the product to customers location and/ or return products.Driver will be required to handle the windows and doors).Perform frequent lifting, pulling, pushing, and carrying of windows and doors of vary Delivery Driver, Class A, Commercial Driver, Delivery

Work closely with a veteran mechanic to learn company-specific fleet and heavy equipment maintenance. What You'll Do as the Diesel Mechanic (Apprentice to Lead):. Nice to Haves as the Diesel Mechanic (Apprentice to Lead):.

Now Hiring: Full-Time Driver / Furniture Mover Secaucus, NJ Pay: $22.At American Furniture Rental, Inc, we pride ourselves on delivering exceptional service and high-quality furniture solutions.We make homes, businesses, events, and trade shows look their best.With over 45 years of industry experi

Perform daily maintenance to vehicle, tools and equipment. Repair truck tires using inspection equipment, drills, and rollers. Perform all tasks in a safe and efficient manner, using provided safety equipment.

Take the next step as our new UPS Delivery Driver to perform daily responsibilities with dedication.Provide excellent interactions with customers and colleagues.Ensure compliance with company and safety standards.Perks include competitive pay, flexible schedules, hands-on training, a collaborative w

Your expertise in welding will ensure that our equipment remains safe, reliable, and ready for service. Understanding of quality standards and visual or mechanical weld inspection (including knowledge of AWS or ISO standards).

Industrial Maintenance Mechanic Job Duties: Ensures operation of machinery and mechanical equipment by completing preventive maintenance requirements on engines, motors, pneumatic tools, conveyor systems, and production machines

Are you ready to wrench with a mechanically savvy team with leadership that cares and wants you to succeed? Bring your tools to the fastest growing fleet maintenance network in the country.

The Welder is responsible for very precise TIG Welding / Fabrication of custom chambers and/or components using customer supplied drawings and/or blueprints while holding tolerances of +/-.Primary Responsibilities: Must be able to meet or exceed the requirement of the project through manual fabrica

Our mechanics take their careers to the next level by working on equipment that requires a high level of skill and determination. Are you seeking a safer work environment as a mechanic? Is your family's financial security important to you? Aspiring to advance in your mechanic career? Searching for