Equipment mechanic jobs in New York, New YorkCreate job alerts

Overview: Primo Brands is a leading branded beverage company in North America with a focus on healthy hydration. We are proud to offer an extensive and iconic portfolio of highly recognizable, sustainably sourced, and conveniently packaged branded beverages distributed across more than 150,000 retail outlets. Compensation: $40 / hour + Paid OT Location: Bronx, NY Schedule: Monday to Friday, 4AM to 12:30PM Responsibilities: * The Fleet Mechanic position is responsible for preventive maintenance, troubleshooting, diagnosis and repair of fleet vehicles and equipment as assigned. * Maintain, troubleshoot, and repair all fleet vehicles within assigned Primo Water North America locations. * Respond to field service calls. * Order mechanical components, services and parts and maintain inventory. * Perform and document all phases of vehicle maintenance and repair, including diagnostics. * Maintain communication with drivers and management regarding maintenance and service of vehicles and equipment. * Maintain a unit history file for each vehicle Qualifications: * Must be 21 years of age or older. * Experience with both diesel /propane vehicles and air brake systems, preferably with heavy duty vehicles. * Engine and Chassis Diagnostic software experience. * Focus on safe work practices and high quality while executing duties under minimal supervision. * Accurately record and document all maintenance activity. * Ability to use fleet software for vehicle maintenance tracking, input work orders, and inventory management. * Workflow -- Daily Vehicle Inspection Report (DVIR) and US DOT requirements for commercial vehicles. * Ability to lift parts and equipment weighing up to 50 pounds. * Must have own set of personal tools. * Ability to meet Department of Transportation (DOT) driver qualification policy requirements. * CDL preferred; ability to obtain within six (6) months of entering the position (CDL may be required in some locations) Primo Brands’ established portfolio includes billion-dollar brands Poland Spring® and Pure Life®, premium brands like Saratoga® and Mountain Valley®, regional leaders such as Arrowhead®, Deer Park®, Ice Mountain® Ozarka®, and Zephyrhills®, purified brands, Primo Water® and Sparkletts®, and flavored and enhanced brands like Splash® and AC+ION®. Our extensive direct-to-consumer offerings and industry-leading line-up of innovative water dispensers create consumer connectivity through recurring water purchases across Water Direct, Water Exchange, and Water Refill. At Primo Brands, our more than 11,000 associates are at the heart of what we do and deliver on our mission to provide healthy hydration to consumers wherever, however and whenever they want it. We believe in fostering a respectful culture, which values our associates who are deeply invested in quality hydration, our communities, and the sustainability of our packaging and water sources for generations to come. Primo Brands is proud to be an Equal Opportunity and Affirmative Action employer, seeking to create a welcoming and diverse environment. We do not discriminate based on race, religion, color, national origin, sex (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender, gender identity, gender expression, transgender status, sexual stereotypes, age, status as a protected veteran, status as an individual with a disability, or other applicable legally protected characteristics. We also consider qualified applicants with criminal histories, consistent with applicable federal, state, and local law. Candidates must possess strong English language skills to effectively communicate with customers and provide exceptional service. Proficiency in English is essential for understanding customer needs, resolving inquiries, and collaborating with team members.

How you'll help us Keep Climbing (overview & key responsibilities) At Delta Air Lines, connection is at the heart of everything we do and guides our every action. We strive to welcome and care for all of our customers during their travels with us and aim to deliver an elevated experience. As a Ground Maintenance Mechanic (GMM) in a stationary role, you will be a part of Delta’s Ground Support Equipment team. The GMM (Stationary) is responsible for the maintenance of stabilized stationary machinery and equipment. Your key maintenance functions include inspections, minor troubleshooting, repairing, removing, and replacing components, cleaning, and assembly. This opportunity requires a minimum of 6 months of experience in an industrial powered mechanical environment and an understanding of mechanical, electrical, hydraulic, and pneumatic disciplines as they apply to industrial powered systems. If you have experience as a semi-skilled industrial maintenance mechanic, then this role is right for you. You will perform all routine and non-routine maintenance on the following while reporting any issues to GSE Supervision: • Passenger loading bridges (interior, exterior, console, and dock lights) and interior and exterior painting (including bulb and lens replacement)., • Air handler hoses, adapters, air filters, condensate pans, and indicator bulbs and lenses., • Gear boxes, bearings and shafts, roller replacements, belt re-lacing, and belts replacements., • Staff’s baggage handling system (BHS) control rooms as well as reconciling bag jams to keep BHS flowing., • Ground power cables and associated clamping/saddles., • Stationary equipment like water cabinets, loading bridges, air handling systems, baggage conveyor systems, and 400 Hz gate power. Internal Movement Eligibility Internal Employees: Before applying for this position, please reference the company's Internal Mobility Policy and Residency Policy to ensure you meet all eligibility requirements. You must be in good standing, which includes meeting performance standards and tenure requirements in your current role. For more information, visit the HR portal or contact your manager or HR representative. Compliance with these policies is mandatory for consideration. What you need to succeed (minimum qualifications) • Consistently prioritizes safety and security of self, others, and personal data., • Embrace diverse people, thinking, and styles., • Possesses a high school diploma, GED, or high school equivalency., • Is at least 18 years of age and has authorization to work in the United States., • Must have a valid driver's license., • Must be proficient in English., • Ability to lift items weighing between 50 and 70 pounds., • Be willing to work a fixed and/or rotating schedule including afternoons, evenings, weekends, and holidays., • Ability to read, comprehend, and apply information found in technical documents, manuals, and schematics., • Strong communication while working as a team and coordinating repairs with other Delta personnel and outside vendors., • Respond to customers' needs with minimum direction and perform repairs in time-sensitive situations., • Competitive salary, industry-leading profit sharing program, and performance incentives., • 401(k) with generous company contributions up to 9%., • New hires are eligible for up to 2-weeks of vacation. This is earned for use in the following vacation year (April 1 – March 31)., • In addition to vacation, new hires are eligible for up to 56 hours of paid personal time within a 12-month period., • LGA/JFK employees may be reimbursed up to $250/month for specific transportation expenses through the NYC Transit Reimbursement Program., • 10 paid holidays per calendar year., • Birthing parents are eligible for 12-weeks of paid maternity/parental leave., • Non-birthing parents are eligible for 2-weeks of paid parental leave., • Comprehensive health benefits including medical, dental, vision, short/long term disability and life insurance benefits., • Family care assistance through fertility support, surrogacy and adoption assistance, lactation support, subsidized back-up care, and programs that help with loved ones in all stages., • Holistic Wellbeing programs to support physical, emotional, social, and financial health, including access to an employee assistance program offering support for you and anyone in your household, free financial coaching, and extensive resources supporting mental health., • Domestic and International space-available flight privileges for employees and eligible family members., • Career development programs to achieve your long-term career goals., • World-wide partnerships to engage in community service and innovative goals created to focus on sustainability and reducing our carbon footprint., • Business Resource Groups created to connect employees with common interests to promote inclusion, provide perspective and help implement strategies., • Recognition rewards and awards through the platform Unstoppable Together., • Access to over 500 discounts, specialty savings and voluntary benefits through Deltaperks such as car and hotel rentals and auto, home, and pet insurance, legal services, and childcare.

How you'll help us Keep Climbing (overview & key responsibilities) At Delta Air Lines, connection is at the heart of everything we do and guides our every action. We strive to welcome and care for all of our customers during their travels with us and aim to deliver an elevated experience. As a Ground Maintenance Mechanic (GMM) in a stationary role, you will be a part of Delta’s Ground Support Equipment team. The GMM (Stationary) is responsible for the maintenance of stabilized stationary machinery and equipment. Your key maintenance functions include inspections, minor troubleshooting, repairing, removing, and replacing components, cleaning, and assembly. This opportunity requires a minimum of 6 months of experience in an industrial powered mechanical environment and an understanding of mechanical, electrical, hydraulic, and pneumatic disciplines as they apply to industrial powered systems. If you have experience as a semi-skilled industrial maintenance mechanic, then this role is right for you. You will perform all routine and non-routine maintenance on the following while reporting any issues to GSE Supervision: • Passenger loading bridges (interior, exterior, console, and dock lights) and interior and exterior painting (including bulb and lens replacement)., • Air handler hoses, adapters, air filters, condensate pans, and indicator bulbs and lenses., • Gear boxes, bearings and shafts, roller replacements, belt re-lacing, and belts replacements., • Staff’s baggage handling system (BHS) control rooms as well as reconciling bag jams to keep BHS flowing., • Ground power cables and associated clamping/saddles., • Stationary equipment like water cabinets, loading bridges, air handling systems, baggage conveyor systems, and 400 Hz gate power. Eligible Delta employees based in New York City (JFK or LGA) can be reimbursed up to $250 per month for specific transportation expenses incurred while traveling to and from work. Employees using public transit, including trains, buses, subways, ferries or van pools to get to and from JFK or LGA may be eligible. Delta Air Lines will never ask candidates for money throughout our recruitment process, including for any pre-employment screenings. All email communications with Delta’s recruitment team will come from a Delta email domain. If you have any questions about the legitimacy of an outreach from Delta’s recruitment team, you can contact . Internal Movement Eligibility Internal Employees: Before applying for this position, please reference the company's Internal Mobility Policy and Residency Policy to ensure you meet all eligibility requirements. You must be in good standing, which includes meeting performance standards and tenure requirements in your current role. For more information, visit the HR portal or contact your manager or HR representative. Compliance with these policies is mandatory for consideration. What you need to succeed (minimum qualifications) • Consistently prioritizes safety and security of self, others, and personal data., • Embrace diverse people, thinking, and styles., • Possesses a high school diploma, GED, or high school equivalency., • Is at least 18 years of age and has authorization to work in the United States., • Must have a valid driver's license., • Must be proficient in English., • Ability to lift items weighing between 50 and 70 pounds., • Be willing to work a fixed and/or rotating schedule including afternoons, evenings, weekends, and holidays., • Ability to read, comprehend, and apply information found in technical documents, manuals, and schematics., • Strong communication while working as a team and coordinating repairs with other Delta personnel and outside vendors., • Respond to customers' needs with minimum direction and perform repairs in time-sensitive situations., • Competitive salary, industry-leading profit sharing program, and performance incentives., • 401(k) with generous company contributions up to 9%., • New hires are eligible for up to 2-weeks of vacation. This is earned for use in the following vacation year (April 1 – March 31)., • In addition to vacation, new hires are eligible for up to 56 hours of paid personal time within a 12-month period., • LGA/JFK employees may be reimbursed up to $250/month for specific transportation expenses through the NYC Transit Reimbursement Program., • 10 paid holidays per calendar year., • Birthing parents are eligible for 12-weeks of paid maternity/parental leave., • Non-birthing parents are eligible for 2-weeks of paid parental leave., • Comprehensive health benefits including medical, dental, vision, short/long term disability and life insurance benefits., • Family care assistance through fertility support, surrogacy and adoption assistance, lactation support, subsidized back-up care, and programs that help with loved ones in all stages., • Holistic Wellbeing programs to support physical, emotional, social, and financial health, including access to an employee assistance program offering support for you and anyone in your household, free financial coaching, and extensive resources supporting mental health., • Domestic and International space-available flight privileges for employees and eligible family members., • Career development programs to achieve your long-term career goals., • World-wide partnerships to engage in community service and innovative goals created to focus on sustainability and reducing our carbon footprint., • Business Resource Groups created to connect employees with common interests to promote inclusion, provide perspective and help implement strategies., • Recognition rewards and awards through the platform Unstoppable Together., • Access to over 500 discounts, specialty savings and voluntary benefits through Deltaperks such as car and hotel rentals and auto, home, and pet insurance, legal services, and childcare.

How you'll help us Keep Climbing (overview & key responsibilities) At Delta Air Lines, connection is at the heart of everything we do and guides our every action. We strive to welcome and care for all of our customers during their travels with us and aim to deliver an elevated experience. As a Ground Maintenance Mechanic (GMM) in a motorized role, you will be a part of Delta’s Ground Support Equipment team. This opportunity requires 6 months of experience in a vehicle/heavy equipment maintenance environment and an understanding of mechanical, electrical, hydraulic, and pneumatic fields as they apply to industrial powered systems. A GMM (Motorized) performs similar tasks of a semi-skilled vehicle/heavy equipment maintenance mechanic. Summary of responsibilities: • Applies appropriate tooling, equipment, and material to accomplish minor maintenance functions including inspections, minor troubleshooting, repairing, removing, and replacing components on select Ground Support Equipment., • Assists a Lead Ground Maintenance Technician or a Ground Maintenance Technician on motorized equipment as needed., • Consistently prioritizes safety and security of self, others, and personal data., • Embrace diverse people, thinking, and styles., • Possesses a high school diploma, GED, or high school equivalency., • Is at least 18 years of age and has authorization to work in the United States., • Must have a valid driver's license., • Must be proficient in English., • Ability to lift items weighing between 50 and 70 pounds., • Be willing to work a fixed and/or rotating schedule including afternoons, evenings, weekends, and holidays., • A detailed understanding of mechanical, electrical, hydraulic, and pneumatic subject areas., • Ability to read, comprehend, and apply information found in technical documents, manuals, and schematics., • Strong communication while working as a team and coordinating repairs with other Delta personnel and outside vendors., • Respond to customers' needs with minimum direction and perform repairs in time-sensitive situations., • Competitive salary, industry-leading profit sharing program, and performance incentives., • 401(k) with generous company contributions up to 9%., • New hires are eligible for up to 2-weeks of vacation. This is earned for use in the following vacation year (April 1 – March 31)., • In addition to vacation, new hires are eligible for up to 56 hours of paid personal time within a 12-month period., • LGA/JFK employees may be reimbursed up to $250/month for specific transportation expenses through the NYC Transit Reimbursement Program., • 10 paid holidays per calendar year., • Birthing parents are eligible for 12-weeks of paid maternity/parental leave., • Non-birthing parents are eligible for 2-weeks of paid parental leave., • Comprehensive health benefits including medical, dental, vision, short/long term disability and life insurance benefits., • Family care assistance through fertility support, surrogacy and adoption assistance, lactation support, subsidized back-up care, and programs that help with loved ones in all stages., • Holistic Wellbeing programs to support physical, emotional, social, and financial health, including access to an employee assistance program offering support for you and anyone in your household, free financial coaching, and extensive resources supporting mental health., • Domestic and International space-available flight privileges for employees and eligible family members., • Career development programs to achieve your long-term career goals., • World-wide partnerships to engage in community service and innovative goals created to focus on sustainability and reducing our carbon footprint., • Business Resource Groups created to connect employees with common interests to promote inclusion, provide perspective and help implement strategies., • Recognition rewards and awards through the platform Unstoppable Together., • Access to over 500 discounts, specialty savings and voluntary benefits through Deltaperks such as car and hotel rentals and auto, home, and pet insurance, legal services, and childcare.

How you'll help us Keep Climbing (overview & key responsibilities) At Delta Air Lines, connection is at the heart of everything we do and guides our every action. We strive to welcome and care for all of our customers during their travels with us and aim to deliver an elevated experience. As a Ground Maintenance Mechanic (GMM) in a motorized role, you will be a part of Delta’s Ground Support Equipment team. This opportunity requires 6 months of experience in a vehicle/heavy equipment maintenance environment and an understanding of mechanical, electrical, hydraulic, and pneumatic fields as they apply to industrial powered systems. A GMM (Motorized) performs similar tasks of a semi-skilled vehicle/heavy equipment maintenance mechanic. Summary of responsibilities: • Applies appropriate tooling, equipment, and material to accomplish minor maintenance functions including inspections, minor troubleshooting, repairing, removing, and replacing components on select Ground Support Equipment., • Assists a Lead Ground Maintenance Technician or a Ground Maintenance Technician on motorized equipment as needed., • Consistently prioritizes safety and security of self, others, and personal data., • Embrace diverse people, thinking, and styles., • Possesses a high school diploma, GED, or high school equivalency., • Is at least 18 years of age and has authorization to work in the United States., • Must have a valid driver's license., • Must be proficient in English., • Ability to lift items weighing between 50 and 70 pounds., • Be willing to work a fixed and/or rotating schedule including afternoons, evenings, weekends, and holidays., • A detailed understanding of mechanical, electrical, hydraulic, and pneumatic subject areas., • Ability to read, comprehend, and apply information found in technical documents, manuals, and schematics., • Strong communication while working as a team and coordinating repairs with other Delta personnel and outside vendors., • Respond to customers' needs with minimum direction and perform repairs in time-sensitive situations., • Competitive salary, industry-leading profit sharing program, and performance incentives., • 401(k) with generous company contributions up to 9%., • New hires are eligible for up to 2-weeks of vacation. This is earned for use in the following vacation year (April 1 – March 31)., • In addition to vacation, new hires are eligible for up to 56 hours of paid personal time within a 12-month period., • LGA/JFK employees may be reimbursed up to $250/month for specific transportation expenses through the NYC Transit Reimbursement Program., • 10 paid holidays per calendar year., • Birthing parents are eligible for 12-weeks of paid maternity/parental leave., • Non-birthing parents are eligible for 2-weeks of paid parental leave., • Comprehensive health benefits including medical, dental, vision, short/long term disability and life insurance benefits., • Family care assistance through fertility support, surrogacy and adoption assistance, lactation support, subsidized back-up care, and programs that help with loved ones in all stages., • Holistic Wellbeing programs to support physical, emotional, social, and financial health, including access to an employee assistance program offering support for you and anyone in your household, free financial coaching, and extensive resources supporting mental health., • Domestic and International space-available flight privileges for employees and eligible family members., • Career development programs to achieve your long-term career goals., • World-wide partnerships to engage in community service and innovative goals created to focus on sustainability and reducing our carbon footprint., • Business Resource Groups created to connect employees with common interests to promote inclusion, provide perspective and help implement strategies., • Recognition rewards and awards through the platform Unstoppable Together., • Access to over 500 discounts, specialty savings and voluntary benefits through Deltaperks such as car and hotel rentals and auto, home, and pet insurance, legal services, and childcare.

Job Description Union or Non-Union: Union Exempt or Non-Exempt: Non-Exempt Department: Facilities Report To: Facilities Director POSITION SUMMARY: Maintenance Mechanic is accountable for the entire repair and service work in a facility and is required to comply with the standard operating procedures of the center. RESPONSIBILITIES: • Painting, plastering and masonry of interior/exterior surfaces., • Plumbing repairs (except for boiler) as required., • Light electrical repair and installation., • Appliance, machinery, lock installation and office furniture repair., • Performs carpentry refurbishing and repair as required., • Responsible for coordinating (as per the direction of the Support Services Coordinator) with the NYC DOH and other contractors for the necessary maintenance and repairs of the facility:, • Assist in numerous incidental jobs relating to facility/custodial procedures and operations., • Assists custodial personnel in performing emergency custodial functions., • Assists in obtaining and dispensing of needed equipment, materials, supplies., • Secures all equipment/tools on a daily basis., • Removes debris from facility grounds to dump area. Maintains landscape and shrubbery, removes snow and performs sidewalk deicing as needed., • Removal of trash and medical hazardous waste from facility., • Assists in the transport manually or otherwise of heavy items., • Maintains facility offices/patient care areas including cleaning, vacuuming, as well as maintenance., • Responsible for opening/closing facility as required., • Does other jobs within the maintenance department as required., • Other duties as they relate to Facilities Operations MINIMUM QUALIFICATIONS: • H.S. Graduate or GED Certificate, • Minimum 5 years of experience with light electrical, plumbing and carpentry work, • Ability to follow written and oral instructions .

Job Description TopView Group, a well-established sightseeing company with over a decade of successful operations in New York City, is currently experiencing rapid growth on a global scale. Powered by in-house technology, TopView Group creates one-of-a-kind experiences for everyone around the world. Our rapidly growing portfolio of products provides a variety of popular adventures, including hop-on hop-off bus tours in NYC and London, special events such as Tea Around Town and North Pole Express, sightseeing and event cruises, bike rental and tours, walking tours, and Attraction Pass. We are also planning to expand to Paris, Washington DC, San Francisco, and many other exciting locations. Our company culture thrives on fast pace, innovation, and productivity, catering to more than one million guests annually. As we experience this exceptional growth, we are seeking a dynamic and skilled professional to join our team as the Fleet Maintenance Manager. We are searching for an individual who brings to the table a start-up mentality since our company is rapidly scaling and focused on being competitive and innovative while challenging ourselves at every opportunity. If you are ready to build something big then you are the perfect fit! We believe that in-person collaboration is critical for TopView Group’s continued success, therefore this role will be a full-time, on-site position at our current maintenance facility located in Ridgewood, New York. Responsibilities: • Lead all maintenance, fabrication and asset lifecycle management activities for the fleet of buses across the US, • Ensure compliance with internal procedures and external agency standards from OSHA, EPA, DOT etc., • Ensure adherence to and help strengthen current preventive and breakdown maintenance programs, • Lead a team of mechanics, fabricators, welders, electricians, cleaners etc. to maintain the current buses and fabricate new buses for various tour products, • Plan, hire, mentor and performance manage the team to ensure the team is prepared to adequately handle current work and future growth of the business, • Ensure that mechanics are trained on their specific roles and company equipment. Work with equipment manufacturers to contribute to the Mechanic Training Program, • Set performance targets and goals and monitor employee productivity, • Establish and sustain a culture of safety, quality, productivity and pride in workmanship across the board, • Organize workflow and ensure that employees understand their duties or delegated tasks, • Utilize the maintenance and inventory software to compile maintenance history, be proactive in resolving issues, ensure sufficient levels of inventory, prioritize work orders, and complete preventive maintenance and regular maintenance items on time, • Improve key performance indicators for the department, including but not limited to safety incident rate, policy adherence, PM compliance, frequency of breakdowns/usage, asset uptime %, fabrication compliance to design, budgetary compliance, inventory levels etc., • Maintain safe and clean working conditions in the shop facility, • Manage work schedule and payroll for the team on a weekly basis, • Be open to working on holidays and weekends and being on call on days off, as required To excel in this role, you should possess the following qualifications: • 10+ years of maintenance management experience, preferably in heavy vehicle (bus, truck, trailers etc.) maintenance dealing with fleets of over 50 units, • Deep knowledge of vehicular maintenance and fabrication operations including mechanical, electrical, powertrain and auxiliary systems, • Experience in preventive maintenance systems, • First hand knowledge of CMMS systems for workflow and inventory management, • Working knowledge of various transit agency regulations like DOT, NYDOT, etc., • Familiarity with safety and environmental regulations from agencies like EPA and OSHA, • Strong leadership experience in leading, motivating and performance managing teams of 20+, • Able to perform root cause analysis and present logical conclusions from diagnosis, • Able to comprehend and interpret technical information present in a variety of forms, including but not limited to engineering drawings, engineering specifications, mathematical equations, architectural drawings etc., • Able to establish priorities and manage workload, • Experience with various productivity, project management and financial suites like Google Workspace, MSOffice, Monday.com, ClickUp.com, SAP, Netsuite etc., • Effective verbal and written communication skills, • Experience managing a union workforce (preferred) Salary: $110k-$130k Benefits: • Employee discount, • Health, vision, and dental insurance hUGjJL6JOK

Job Description Start Time: 6:30 AM End Time: 3:00 PM Mechanic In Training - Water/Wastewater Treatment Facility At , we challenge what is currently accepted, so we can shape innovative and lasting solutions for tomorrow. Through the delivery of our operations and maintenance services, youll make it simpler and more seamless for our municipal clients to operate safely and efficiently, empowering communities to focus on what matters most to them people. As a Mechanic-in-Training, youll join a collaborative team ensuring that our clients can deliver their services uninterrupted. Based at the North Hudson Sewerage Authority in Hoboken, New Jersey, youll have the opportunity to perform a variety of tasks in the preventive and corrective maintenance on water/wastewater treatment plants and related facilities equipment on an assigned shift. Youll contribute to the success of our program with efficient preventive maintenance and effective solutions to challenges that may arise in municipal facilities. Youll perform preventive and corrective maintenance on buildings, structures, grounds, machinery and equipment; lubricate equipment and check for malfunctions; replace packing in pumps or valves; replace bearings in motors, pumps, and other equipment; tune engines, set valve clearance, clean, and adjust regulators; examine equipment failures to identify cause and to prevent recurrences; and install and sets up new equipment. Youll also clean and paint interior and exterior equipment and buildings; lean out pipes and perform other plumbing and pipe fitting tasks as required; use gas and/or arc welding equipment to heat, cut, braze, or weld; perform duties of painter in their absence; assist in keeping maintenance records; and perform other duties as required. Most importantly, youlltake actionto ensure the safety, health and well-being of you and your team. Heres What Youll Need: A valid drivers license with no major infractions Ideally, Youll Also Have: Experience in the maintenance of wastewater treatment plants and related equipment, or similar maintenance experience A valid Certified Maintenance & Reliability Technician (CMRT) certification or ability to obtain within 3 years of date of hire Experience in the use of Computerized Maintenance Management Systems (CMMS) Forklift experience Experience in serving municipal utility client Safe work practices Working Conditions & Physical Requirements: Safety is a core value at . We are committed to providing a safe and healthy workplace for all employees. This position will spend a substantial amount of time performing safety sensitive labor or services. Responsibilities: Comments/Special Instructions Candidate will work Monday-Friday 630-3PM (1/2 hr lunch and 15 min AM & PM break); once trained, will be required to be on the on-call rotating schedule and work overtime when required.

Job Description Hotel Maintenance Technician (Line Engineer) SUMMARY: Keep all equipment in good repair with a minimum of downtime by providing day-to-day maintenance of the hotel under the direction of Engineering Management. Continually work towards and support the improvement of engineering service to both guests and associates. RESPONSIBILITIES: • Report to work on time and in full uniform., • Train and instruct other members of the staff through sharing of knowledge and skills., • Operate as an independent mechanic by analyzing problems, identifying courses of action, and implementing solutions with available resources and to a high degree of quality., • Keep accurate completion and task records in the project files. Set an example of continuous self-development., • Plunging toilets, unclogging drains, repairing all types of hardware, plumbing, and electrical equipment including lamps, air conditioners and cosmetic items., • Clean, lubricate, protect, and otherwise maintain all tools and equipment in the hotel. See that all tools used are returned to the shop and secured in proper storage area., • To protect and otherwise maintain your assigned tool pouch and its tools at the discretion of the Engineering Management., • Monitor systems as necessary, to be fully informed of the system operation and to handle emergencies involving the systems., • Have a working knowledge of fire sprinkler and emergency power systems. Observe and analyze energy and utilities usage in the hotel and on the grounds., • Look for ways to conserve energy and report any ideas to the Engineering Management., • Be available for any emergencies and act in an engineering capacity to protect our guests and associates, and preserve the building and its systems during the emergency., • To act as quickly and responsibly as possible to return the building to its normal operating status. To inform Engineering Management of any such emergencies., • Be aware of all existing departmental Job Safety Analysis and to strive to work in an accident-free manner and to create a safe work environment for others., • Continuously look for conditions which may endanger associates or guests of the hotel and to take immediate action to correct any hazardous conditions found., • Read, log, track, and interpret readings from meters, gauges, and other measuring units., • Maintain a thorough log of each day’s activities and problems that occur and to ensure this information is passed on to other shifts., • Clean all engineering areas as directed by Engineering Management., • Work in a neat and efficient manner, keeping work areas clean and well organized., • Serve as otherwise directed or needed to help maintain the effective and efficient operation of the hotel at the discretion of Engineering Management or the hotel General Manager., • Complete all work assigned in a safe and professional manner. Maintain communications with supervisors to ensure that all needed materials, tools, and supplies are available or on order., • Follow up on any items that may be on back order. Keep supervisor updated on assignments., • Provide training and technical advice to other engineers as needed or requested., • Maintains a working knowledge of all federal, state, and local laws, codes, and regulations., • Maintains a professional image at all times., • Maintains the hotel facility and related equipment in a safe and efficient manner., • Provides for a safe work environment by following all safety and security procedures and rules., • Reads, learns, understands, and refers to the Standard Operating Procedures., • Each associate will be required to follow the rules as found in the M&R Employee Handbook. Performs other duties as assigned by management, of which employee is capable of performing

Job DescriptionDescription: The Maintenance Mechanic is responsible for corrective and preventive maintenance of equipment and facilities. He performs building of new equipment and other miscellaneous tasks as needed. • Performs preventive maintenance tasks as per generated work orders., • Performs corrective maintenance tasks as requested., • Works with engineering to build new manufacturing equipment., • Installs or moves equipment as requested by Engineering., • Wire electrical enclosures, • Fabricates replacement parts using machine shop equipment., • Performs miscellaneous building/facilities maintenance., • Complies with safety regulations and maintain clean and orderly work areas., • Other duties as required by Supervisor.Requirements:, • Proven experience as Maintenance Technician or relevant position., • Technical Capacity to execute equipment repairs and maintenance, • Good analytical critical thinking. Must have initiative and be results driven., • Three plus years of experience in mechanical and/or electric maintenance required., • While performing the duties of this job, the employee will often work near moving mechanical parts and is occasionally exposed to wet and/or humid conditions, ambient air, fumes or airborne particles., • The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job., • Candidate must be able to perform the physical responsibilities of the job utilizing arms, hands, and fingers to perform complex functions of manufacturing parts and performing other duties of the job; e.g., standing, sitting, walking throughout the facility and stairs, bending, squatting, and kneeling, etc. Benefits: Eligible after 1st day: • Paid holidays, • Medical, Dental, Vision, Basic Life/AD&D Insurance, Voluntary Term Life/AD&D Insurance, • Health Savings Account (HSA), Flexible Spending Account (FSA), Dependent Care Account, Commuter Transportation Management Account, • Vacation time, • 401(k) with Employer Match We’re proud to be an equal opportunity employer. This means we actively pursue ways to celebrate our differences and don’t discriminate based on an individual’s race (including traits historically associated with race, such as hair texture, hair type, and protective hairstyles including braids, locks, and twists), creed, national origin, nationality, religion, ancestry, age (40 or over), sex (including pregnancy), familial status, marital status, civil union or domestic partnership status, affectional or sexual orientation, gender identity or expression, mental or physical disability (including perceived disability, AIDS, and HIV status), atypical hereditary cellular or blood trait, genetic information, because of liability for service in military, status as a smoker or non-smoker, status as a registered medical marijuana user, or any unlawful criterion existing under applicable federal, state, or local laws. If you need assistance or an accommodation due to a disability, contact us at .

Job Description Staff Management Group is seeking a Maintenance Mechanic for our client in Lyndhurst, NJ. Please read the ENTIRE job description and ALL of the job requirements BEFORE applying for this position. Schedule: • 1st Shift: 4AM - 12:30PM, • Monday - Friday, • Plus Overtime Pay Rate: • $30 / hour Job Summary: The Maintenance Mechanic is responsible for performing routine repairs, troubleshooting issues, and supporting facility and equipment maintenance across the warehouse. This role requires strong mechanical aptitude, the ability to diagnose problems independently, and proficiency with hand tools and basic electrical systems. The ideal candidate is detail-oriented, proactive, and capable of working flexible hours within the company’s operating schedule. Saturday work is uncommon and will always be scheduled in advance. Job Responsibilities: • Perform routine maintenance and repairs on warehouse equipment and building systems, • Use hand tools, power tools, VOMs, levels, and diagnostic equipment safely and effectively, • Troubleshoot equipment issues and identify root causes with minimal supervision, • Complete work orders, document repairs, and communicate progress to supervisors, • Identify parts needed for repairs or preventive maintenance and submit requests, • Maintain a clean, organized, and safe work area at all times, • Support minor repairs on forklifts and other warehouse machinery, • Assist with basic electrical work, including troubleshooting simple circuits, • Perform basic HVAC tasks such as replacing filters, belts, and cleaning components, • Support conveyor system maintenance and monitor equipment performance, • Assist with general building maintenance as needed, • Report observed issues promptly and recommend corrective actions Job Requirements: • MUST be bilingual - English AND Spanish, • Proficiency with basic hand tools, power tools, VOMs, levels, and diagnostic equipment, • Foundational knowledge of electrical systems, including basic troubleshooting, • Strong communication skills and the ability to explain issues clearly, • Self-motivated, reliable, and able to work independently when needed, • Experience with conveyor systems, basic building repairs, minor forklift maintenance, and basic HVAC tasks preferred, • Ability to take ownership of assigned work and maintain detailed documentation, • Flexible availability within operating hours; occasional scheduled Saturday work, • Strong problem-solving skills and a diagnostic mindset. Additional Information Staff Management Group is an equal employment opportunity employer, and all qualified applicants will receive consideration for employment without unlawful discrimination based on race, color, creed, national origin, sex, age, disability, marital status, sexual orientation, or citizenship status. About Staff Management Group: Staff Management Group has over 30 years of experience placing staffing candidates in distribution, manufacturing, production, assembly, and clerical positions. Staff Management Group is one of New Jersey’s leading staffing and recruiting agencies specializing in light industrial and clerical staffing. Come join the team! #IND1

Job Description Staff Management Group is seeking a Packaging Mechanic for our client in East Hanover, NJ. Please read the ENTIRE job description and ALL of the job requirements BEFORE applying for this position. Schedule: • 3rd Shift: 11PM - 7:15AM Pay Rate: • $30 - $35 / hour Job Summary: We are seeking a highly skilled and proactive Packaging Machinery Mechanic to support our 3rd shift operations, who can expertly set up, operate, troubleshoot, and maintain all packaging equipment. Job Responsibilities: • Lead setup and changeover for packaging lines—blister machines, bottle fillers, cartoners, inkjet and UV printers, vision systems—ensuring proper tooling, alignment, and format accuracy., • Set and verify all process parameters (speed, temperature, fill levels, print registration) in accordance with documented SOPs and regulatory standards, • Diagnose and resolve mechanical, electrical, pneumatic, and automation-related issues quickly to maintain uptime., • Perform preventive maintenance tasks—lubrication, inspections, parts replacement—to reduce breakdowns and extend equipment life., • Collaborate closely with Quality Assurance to investigate packaging defects, regulatory deviations, or customer complaints, providing corrective actions and improving process controls., • Ensure strict adherence to cGMP, DEA, OSHA, and internal safety guidelines; lead safety reviews, lockout/tagout (LOTO), line clearance, and approval protocols., • Maintain detailed machine logs, maintenance records, and batch documentation in CMMS/SAP for compliance and auditing purposes., • Analyze production inefficiencies and waste, recommending and implementing process improvements and potential equipment upgrades or expansions., • Leverage solid working knowledge of PLCs and automation controls, and familiarity with continuous and thermal inkjet, UV printers, vision systems, and automotive-grade packaging machinery., • Actively recommend new technologies, retrofit opportunities, and automation strategies to support future-scale operations. Job Requirements: • Education/Experience: High school diploma or technical degree. Minimum 5 years' experience in packaging machinery maintenance and operation., • Proficient in mechanical, electrical, hydraulic, and pneumatic systems., • Skilled in PLC programming and troubleshooting., • Experienced with various packaging equipment—fillers, labelers, cartoners, blister systems, inkjet/UV printers, vision systems., • Soft Skills: Strong leadership, communication, training, and teamwork capabilities. Demonstrated ability to prioritize, solve complex issues, and drive continuous improvement., • Compliance: Deep understanding of cGMP, DEA, OSHA, and other relevant regulatory frameworks., • This role reports directly to the Director of Operations, takes hands-on responsibility for packaging machinery integrity, and works closely with QA, Production, and Engineering. Additional Information Staff Management Group is an equal employment opportunity employer, and all qualified applicants will receive consideration for employment without unlawful discrimination based on race, color, creed, national origin, sex, age, disability, marital status, sexual orientation, or citizenship status. About Staff Management Group: Staff Management Group has over 30 years of experience placing staffing candidates in distribution, manufacturing, production, assembly, and clerical positions. Staff Management Group is one of New Jersey’s leading staffing and recruiting agencies specializing in light industrial and clerical staffing. Come join the team! #IND1

Job Description We're hiring for entry-level auto roles at Carvana - the fastest-growing used automotive retailer in U.S. history and one of the four fastest companies to make the Fortune 500. In these entry-level roles, you'll have a number of positions to choose from: • Detailer: detailing vehicles, including washing, interior cleaning, and exterior buffing, • Lot Attendant: move vehicles from one department to the next in our Inspection Centers, • Photobooth Associate: take photos of our vehicles so customers can see our vehicles in our spinners, • Inspection Associate: inspect the interior and exterior of the vehicles and accurately identify any imperfections/defects At Carvana, you'll receive a competitive wage and amazing perks – including a 401(k) with Carvana match and even a vehicle purchase discount – all while using state of the art tools in one of our high-tech Inspection Centers (click here to learn more). If you're joining us in an entry-level position, we offer training programs to make sure your skills and pay progress along with the company. Pay Range: $19-$20 hourly Other perks of the Job • 100% company-paid healthcare premiums, • Generous paid-time off and your birthday is a holiday!, • ASE and tool reimbursement programs, • Tuition reimbursement and student loan repayment Schedule: We do everything we can to deliver an exceptional customer experience, and that includes delivering great vehicles when expected. If we're in a pinch, mandatory overtime is one way in which we can follow-through on this commitment to our customers. We're looking for team players who are all in on our mission and are able to work mandatory overtime based on our business needs. How To Get Started - join the Carvana team by applying on this page! We also have a variety of other automotive roles available in one of our 18 locations across the country – take a look at our Careers site to apply for one of the following roles: • Auto Body roles: Paint, Prep/Body work, Wheel Repair, Airbrush, Interior Repair, Glass Repair, and PDR (Paintless Dent Repair) roles, • Auto Technician/Mechanic roles: Lube and Oil, Inspection, Brake and Tire, Mechanical Repair / Build, and Master Technician roles, • Ability to physically operate vehicle equipment and tools - must be able to lift up to 60 pounds independently, • Must be at least 18 years of age and possess a valid driver's license. Some positions may be subject to an Motor Vehicle Records (MVR) check, • An ability to work in a fast-paced, ever-changing production environment while sometimes being exposed to excessive weather conditions (heat/cold), • Use of safety equipment that may include but not limited to face shield or goggles, non-slip shoes, gloves, mask, and other protective garments and equipment About Carvana At Carvana, we sell cars but we aren't car salesmen. Our promise is simple: we won't sell a car to a customer that we wouldn't sell to our own Mom. Period. To make sure our cars are in first-rate condition, we've built multiple vehicle Reconditioning Centers around the country, where our cars are inspected, perfected, and photographed before reaching the Carvana website. Think you've got what it takes to join our team? Apply today! Carvana is an equal employment opportunity employer. All applicants receive consideration for employment without regard to race, color, religion, gender, sexual orientation, gender identity or expression, marital status, national origin, age, mental or physical disability, protected veteran status, or genetic information, or any other basis protected by applicable law. Carvana also prohibits harassment of applicants or employees based on any of these protected categories. Hiring is contingent on passing a complete background check. This role is not eligible for visa sponsorship. Must be at least 18 years of age and possess a valid driver's license. Must be able to read, write, speak and understand English.

Job Description Maintenance Mechanic-Full Time The Parker Jewish Institute, located in New Hyde Park NY, is seeking a Full Time General Mechanic to join our building services team in our skilled nursing facility. A vital and important part of the team you will ensure the facility and its equipment are in good working condition to ensure the comfort and safety of our residents. Position Overview As a Maintenance Mechanic at Parker Jewish Institute, you will be responsible for general building repairs and preventative maintenance assignments. An essential part of the building services team, you will carry out assignments, inspections and maintenance of gas, plumbing, electrical, electronic, HVAC systems, painting, grounds maintenance, as well as other assignments as needed. About Parker The Parker Jewish Institute for Health Care and Rehabilitation, conveniently located on the Queens-Nassau County border in New Hyde Park, New York, is a non-profit health care facility that offers inpatient programs such as sub-acute/short term rehabilitation, long-term care and nursing home care, as well as community health services encompassing certified home health care and a comprehensive community hospice program that serves terminally ill patients in their own homes or in nursing facilities, including Parker's nursing home. Quality care means hiring quality people, and Parker Jewish Institute for Health Care and Rehabilitation has a longstanding reputation for excellence and innovation in resident and patient care. Why Work at Parker * Friendly, collaborative team environment and exciting career growth opportunities providing an opportunity to learn, grow and have an impact on the overall results * Excellent training and clinical education * Accessible via public transportation * Free parking on site for all staff * On-site cafeteria offering breakfast and lunch Position Requirements * High School Diploma or GED * Four (4) years of apprenticeship training in one or more trades (documented) or four (4) years of experience in the carpentry, electrical, painting, plumbing, masonry, or one of the mechanical trades * Must have a clean and active NYS Driver's License * Must have and maintain a valid FDNY and G71 certificate of fitness required by FDNY * Will be friendly and sociable and be able to provide comfort to patients with good interpersonal skills - both verbal and in writing * Team member - with a collaborative, team-based work environment, we are looking for individuals who embrace a high level of care, compassion and teamwork Job Posted by ApplicantPro

Job Description $3,000 Sign On Bonus Vitan Equipment is looking for an experienced Mobile Mechanic to repair heavy equipment. You’ll service, diagnose, and maintain forklifts and material handling equipment—no two days are the same. Why You’ll Love It Here: • Pay range $21-$33 an hour, based on experience and qualifications, • $3,000 Sign on bonus, • Commission opportunities to boost your earnings, • Company vehicle provided, • No weekends & first shift, • PTO, medical, dental, vision, retirementWhat You’ll Do:, • Diagnose and repair mechanical, electrical, and hydraulic issues, • Perform preventative maintenance to keep equipment in top shape, • Travel to customer sites—variety of work every day, • Ensure equipment is safe and meets standards, • Keep accurate records of work performedWhat You’ll Need:, • 2+ years’ experience in forklift or heavy equipment repair (electric, propane, diesel), • Strong troubleshooting skills, safety focus and customer orientated mindset 44dOGiJeO3

Job Description JOB DESCRIPTION JOB TITLE: MAINTENANCE MECHANIC FLSA: NON-EXEMPT DIVISION: SERVICES - FACILITIES REPORTS TO: FACILITY MANAGER LOCATION: BROOKLYN, NY SALARY: $45,000.00 annually SUMMARY: The Maintenance Mechanic performs all necessary interior and exterior facility repairs including plumbing, electrical, HVAC, carpentry, window, and lock work of a 200 bed men’s homeless shelter. Keeps facility in working order using troubleshooting techniques and performing repairs as necessary. Fills in for Custodian/Driver in his/her absence and on designated shifts. Reports to the Lead Mechanic. Scheduled hours of work will vary based on the needs of the facility. Weekend and evening hours are required. Proof of COVID-19 vaccinations required. DUTIES & RESPONSIBILITIES: · Escorts outside contractors, inspectors and other visitors and accepts deliveries as needed · Responsible for all repairs in building and on grounds · Troubleshoots and repairs includes light electrical and plumbing (outlets, switches, light fixtures, washers, seats and stems; drain lines; sinks; tubs; and toilets. Clears stoppages · Performs HVAC troubleshooting and servicing including cleaning units/replacing filters · Makes repairs to damaged sheetrock and plaster. Sands and paints as necessary · Repairs/replaces windows, doors, locks and flooring; assembles/repairs/installs room furniture · Repairs any client damage to rooms, furniture or room fixtures · Responsible for all mechanical work on room turnovers and for work orders for occupied rooms · Completes preventative maintenance checklists as directed by Supervisor · May assist as needed with transfers or packing and storing of residents’ belongings · In the absence of Custodian/Driver, performs all necessary custodial duties · In the absence of Custodian/Driver, drives agency vehicles to transport clients and materials · Performs other related duties as assigned EXPERIENCE, EDUCATION AND SPECIAL REQUIREMENTS: High School Diploma or GED with English and Math skills required. Trade/Technical School training a plus. Two (2) years mechanical experience and experience with floor care equipment and procedures necessary. Valid NYS Driver's License & clean record required. AGENCY PROFILE & EMPLOYEE EXPECTATIONS: Westhab is a prominent community development organization, providing housing and supportive services for more than 10,000 of the most vulnerable members of our community each year. We are staffed by an extraordinary group of hard-working professionals that are fully committed to our mission - Building Communities. Changing Lives. Working at Westhab is not easy. Our expectations for all staff are high. We believe that the people and the communities that we have the privilege to serve deserve our very best every day. We are a results-driven organization that focuses on empowerment and impact. If you want to apply for this opportunity, it should only be because you feel ready for the challenges and expectations that come with joining this kind of team. (EOE) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION (OSHA): The Occupational Safety and Health Administration (OSHA) ensures safe and healthful working conditions to workers by setting and enforcing standards and by providing training, outreach, education and assistance. Westhab complies with all applicable OSHA standards, rules and regulations in addition to keeping our workplaces free of serious recognized hazards. Powered by JazzHR mNd2aXphMM

Job Description Midwood EMS is seeking a team member to join our Maintenance Department in our Brooklyn Base located in Coney Island WHY WORK WITH MIDWOOD EMS: • Weekly Paychecks, • Paid Time Off, • Professional Work Environment Performs general cleaning and minor maintenance duties in maintaining office space, garage, vehicles, and equipment in clean, orderly and functional condition. Provides assistance to staff and other employees as necessary. General Duties: • Performs work according to standard procedure and by building's operational schedule., • Cleans rooms, hallways, restrooms, crew room, offices, stairways and windows., • Uses brooms, mops, and floor equipment to sweep, mop, and wax floors., • Uses vacuum cleaners to clean floors and upholstered furniture and blinds., • Dusts , cleans polishes furniture and equipment., • Washes walls, ceilings, woodwork, windows, doors and sills., • Makes minor carpentry, electrical, mechanical and plumbing repairs., • Performs touch up and finish painting., • Empties wastebaskets., • Replenishes restroom supplies., • Replaces light bulbs., • Sets up and tears down chairs, tables and equipment in meeting rooms, and function rooms., • Clears snow from entrances and walkways., • Picks up and delivers supplies and materials to rooms., • Follows all applicable safety rules and procedures., • Cleans and maintains vehicles including washing exterior, windshield, side mirrors, and tires., • Cleans and maintains vehicles including mopping interior., • Handle oxygen bunker for crew members when needed, • Gas up vehicles regularly Additional Duties: • Participates in general cleaning, painting, and repair work, • Uses hand tools and power tools in making minor maintenance repairs, • Assists in shipping and receiving supplies and materials, • Ability to apply common sense understanding to carry out detailed but uninvolved oral or written instructions, • Ability to relate to supervisors and staff in a courteous manner, • Ability to life and carry objects weighing 15 – 25 pounds, • Ability to work occasionally in poor weather conditions including heat, cold, rain, or snow., • Move Van size ambulances and company vehicles throughout the garage, • Drive Van size ambulances and company vehicles to Mechanic shop, dealers or auto body shops caIcFIWYZ2

Job Description JOB DESCRIPTION JOB TITLE: MAINTENANCE MECHANIC FLSA: NON-EXEMPT DIVISION: SERVICES - FACILITIES REPORTS TO: FACILITY MANAGER LOCATION : BRIARWOOD, NY SALARY: $21.63 hourly SUMMARY: The Maintenance Mechanic performs all necessary interior and exterior facility repairs including plumbing, electrical, HVAC, carpentry, window, and lock work of a 200 bed men’s homeless shelter. Keeps facility in working order using troubleshooting techniques and performing repairs as necessary. Fills in for Custodian/Driver in his/her absence and on designated shifts. Reports to the Lead Mechanic. Scheduled hours of work will vary based on the needs of the facility. Weekend and evening hours are required. Proof of COVID-19 vaccinations required. DUTIES & RESPONSIBILITIES: * Escorts outside contractors, inspectors and other visitors and accepts deliveries as needed * Responsible for all repairs in building and on grounds * Troubleshoots and repairs includes light electrical and plumbing (outlets, switches, light fixtures, washers, seats and stems; drain lines; sinks; tubs; and toilets. Clears stoppages * Performs HVAC troubleshooting and servicing including cleaning units/replacing filters * Makes repairs to damaged sheetrock and plaster. Sands and paints as necessary * Repairs/replaces windows, doors, locks and flooring; assembles/repairs/installs room furniture * Repairs any client damage to rooms, furniture or room fixtures * Responsible for all mechanical work on room turnovers and for work orders for occupied rooms * Completes preventative maintenance checklists as directed by Supervisor * May assist as needed with transfers or packing and storing of residents’ belongings * In the absence of Custodian/Driver, performs all necessary custodial duties * In the absence of Custodian/Driver, drives agency vehicles to transport clients and materials * Performs other related duties as assigned EXPERIENCE, EDUCATION AND SPECIAL REQUIREMENTS: High School Diploma or GED with English and Math skills required. Trade/Technical School training a plus. Two (2) years mechanical experience and experience with floor care equipment and procedures necessary. Valid NYS Driver license & clean record required. AGENCY PROFILE & EMPLOYEE EXPECTATIONS Westhab is a prominent community development organization, providing housing and supportive services for more than 10,000 of the most vulnerable members of our community each year. We are staffed by an extraordinary group of hard-working professionals that are fully committed to our mission - Building Communities. Changing Lives. Working at Westhab is not easy. Our expectations for all staff are high. We believe that the people and the communities that we have the privilege to serve deserve our very best every day. We are a results-driven organization that focuses on empowerment and impact. If you want to apply for this opportunity, it should only be because you feel ready for the challenges and expectations that come with joining this kind of team. (EOE) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION (OSHA): The Occupational Safety and Health Administration (OSHA) ensures safe and healthful working conditions to workers by setting and enforcing standards and by providing training, outreach, education and assistance. Westhab complies with all applicable OSHA standards, rules and regulations in addition to keeping our workplaces free of serious recognized hazards.

Job Description JOB TITLE: MAINTENANCE MECHANIC FLSA: NON-EXEMPT DIVISION: SERVICES - FACILITIES REPORTS TO: FACILITY MANAGER LOCATION: BRIARWOOD, NY SALARY: $18 - $21 per hour SUMMARY: The Maintenance Mechanic performs all necessary interior and exterior facility repairs including plumbing, electrical, HVAC, carpentry, window, and lock work of a 200 bed men’s homeless shelter. Keeps facility in working order using troubleshooting techniques and performing repairs as necessary. Fills in for Custodian/Driver in his/her absence and on designated shifts. Reports to the Lead Mechanic. Scheduled hours of work will vary based on the needs of the facility. Weekend and evening hours are required. Proof of COVID-19 vaccinations required. DUTIES & RESPONSIBILITIES: • Escorts outside contractors, inspectors and other visitors and accepts deliveries as needed, • Responsible for all repairs in building and on grounds, • Troubleshoots and repairs includes light electrical and plumbing (outlets, switches, light fixtures, washers, seats and stems; drain lines; sinks; tubs; and toilets. Clears stoppages, • Performs HVAC troubleshooting and servicing including cleaning units/replacing filters, • Makes repairs to damaged sheetrock and plaster. Sands and paints as necessary, • Repairs/replaces windows, doors, locks and flooring; assembles/repairs/installs room furniture, • Repairs any client damage to rooms, furniture or room fixtures, • Responsible for all mechanical work on room turnovers and for work orders for occupied rooms, • Completes preventative maintenance checklists as directed by Supervisor, • May assist as needed with transfers or packing and storing of residents’ belongings, • In the absence of Custodian/Driver, performs all necessary custodial duties, • In the absence of Custodian/Driver, drives agency vehicles to transport clients and materials, • Performs other related duties as assigned EXPERIENCE, EDUCATION AND SPECIAL REQUIREMENTS: High School Diploma or GED with English and Math skills required. Trade/Technical School training a plus. Two (2) years mechanical experience and experience with floor care equipment and procedures necessary. Valid NYS Driver license & clean record required. AGENCY PROFILE & EMPLOYEE EXPECTATIONS Westhab is a prominent community development organization, providing housing and supportive services for more than 10,000 of the most vulnerable members of our community each year. We are staffed by an extraordinary group of hard working professionals that are fully committed to our mission - Building Communities. Changing Lives. Working at Westhab is not easy. Our expectations for all staff are high. We believe that the people and the communities that we have the privilege to serve deserve our very best every day. We are a results-driven organization that focuses on empowerment and impact. If you want to apply for this opportunity, it should only be because you feel ready for the challenges and expectations that come with joining this kind of team. (EOE) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION (OSHA): The Occupational Safety and Health Administration (OSHA) ensures safe and healthful working conditions to workers by setting and enforcing standards and by providing training, outreach, education and assistance. Westhab complies with all applicable OSHA standards, rules and regulations in addition to keeping our workplaces free of serious recognized hazards. Powered by JazzHR fV2pjqJr6Q

Job Description • We are hiring immediately for full time BOILER MAINTENANCE TECH positions., • Location: Mondelez - 200 DeForest Avenue, East Hanover, New Jersey 07936. Note: online applications accepted only., • Schedule: Full time schedule; Monday through Friday, hours may vary. More details upon interview., • Requirement: A New Jersey Blue Seal Boiler Operator License is required., • Pay Range: $30.00 per hour to $35.00 per hour. ESFM is the corporate Integrated Facilities Management (IFM) division of Compass Group USA and a Keystone member of the International WELL Building Institute (IWBI). We Make Applying Easy! Want to apply to this job via text messaging? Text JOB to 75000 and search requisition ID number 1484461. The advertised program is a conversational recruiting assistant that helps you apply to jobs with Compass Group. Message frequency varies. Message and data rates may apply. Text STOP to opt out or HELP for help. Terms and conditions: Rooted in hospitality, ESFM elevates the workplace experience as the single source of innovative FM solutions that ensure a safe, healthy, and sustainable environment. ESFM’s clients include many household names from Life Science, Technology, Oil & Gas and Manufacturing markets. ESFM self-performs 80% of all IFM solutions provided to clients. Their portfolio of service categories includes Environment, Health & Safety, Facilities Maintenance & Engineering, Sustainability, Janitorial & Industrial Cleaning, Laboratory Support and Workplace solutions. This self-performance model creates a consistent hospitality experience for clients, resulting in higher engagement and productivity from their employees. In 2020, ESFM (formerly Eurest Services) won the George Graves Award for Facility Management Achievement from the International Facilities Management Association (IFMA). Job Summary Summary: Boiler operators perform a variety of maintenance and plan operating duties for facility’s Maintenance Department. The role operate, repair, maintain, and adjust boilers, turbines, pumps, compressors, water lines, steam lines, valves, and all related systems and equipment. Essential Duties and Responsibilities: • Updates work statuses and documents tasks completed in the CMMS utilizing a mobile device., • Monitors and maintain boilers., • Inspect fluids, water, gas, etc inside boilers and related equipment. When necessary, this role will make adjustments to the fluids to ensure systems are operating., • Repairs boiler machinery such as piping and valves., • Replaces boiler parts that are defective or in need of replacement., • Records daily readings., • Adjusts equipment as needed to make sure the boiler system is functioning safely., • Maintains cleanliness of boiler rooms and related facilities., • Read blueprints., • Performs other duties as assigned. Qualifications: • 2 years of experience as a Maintenance Mechanic or Technician in a similar sized institution in an engineering or maintenance occupation., • Valid driver’s license., • Apprentice card from the State in plumbing, electrical, HVAC or relevant trade., • A general understanding of electro-mechanical equipment., • Rudimentary ability to utilize hand-operated construction equipment., • Ability to repeatedly lift 50 pounds and kneel/bend/stoop and perform strenuous labor for extended periods of time. Working Conditions: Full-time and part-time positions offer the following benefits to associates: Retirement Plan, Associate Shopping Program, Health and Wellness Programs, Discount Marketplace, Identity Theft Protection, Pet Insurance, Voluntary Benefits, including Critical Illness Insurance, Accident Insurance, Hospital Indemnity Insurance, Legal Services, and Choice Auto and Home Program Full-time positions also offer the following benefits to associates: Medical, Dental, Vision, Life Insurance/AD, Disability Insurance, Commuter Benefits, Employee Assistance Program, Flexible Spending Accounts (FSAs) Associates may also be eligible for paid and/or unpaid time off benefits in accordance with applicable federal, state, and local laws. For positions in Washington State, Maryland, or to be performed Remotely, click here or copy/paste the link below for paid time off benefits information. About Compass Group: Achieving leadership in the foodservice and facility management industry Compass Group is an equal opportunity employer. At Compass, we are committed to treating all Applicants and Associates fairly based on their abilities, achievements, and experience without regard to race, national origin, sex, age, disability, veteran status, sexual orientation, gender identity, or any other classification protected by law. Qualified candidates must be able to perform the essential functions of this position satisfactorily with or without a reasonable accommodation. Disclaimer: this job post is not necessarily an exhaustive list of all essential responsibilities, skills, tasks, or requirements associated with this position. While this is intended to be an accurate reflection of the position posted, the Company reserves the right to modify or change the essential functions of the job based on business necessity. Applications are accepted on an ongoing basis. ESFM maintains a drug-free workplace. ESFM

Job DescriptionBenefits: • 401(k), • 401(k) matching, • Bonus based on performance, • Company parties, • Competitive salary, • Free uniforms, • Health insurance Experience: We are seeking a industrial service technician to work on pumps and motors. Comfortable environment, and overtime available. Pay: 55k to 80K Benefits: • Company contributed medical, • Pension, Life Insurance, Employee Parking, Uniforms, Etc., • Paid holiday and vacationsApplicant must have minimum five years experience and must be willing to work overtime Salary based on experience

Job Description General Summary We are seeking a maintenance worker to assist the superintendent in maintaining the physical integrity of the property. This involves insuring a safe, secure, and comfortable living environment for residents, visitors and staff. The maintenance worker will carry out assigned duties in a safe manner and other duties as requested by the Superintendent. Essential Job Functions/Responsibilities: A building maintenance worker must possess a variety of skills encompassing most of the construction trades, handling that require basic skills as an electrician, carpenter, plumber, mechanic, painter, HVAC technician and roofer, as well as be able to perform all the responsibilities of a porter, should the situation warrant. The building maintenance worker must always remain aware of their limitations and request the services of a professional when the worker’s lack of expertise requires it. Maintenance workers might touch up paint in the lobby, repair a faulty house lock, troubleshoot an open electrical short and replace a faucet, carry an extension ladder, use a 14-pound sledgehammer, all in the same day. • Plumbing: includes the repair, replacement or installation of faucets, pipes, toilets, garbage disposals, dishwashers, water-dispensing refrigerators, and washing machines., • Electrical: includes the troubleshooting, repair, replacement or installation of power switches, fuses, wall sockets, ceiling lights, and ceiling fans., • Drywall/Plaster repair: includes filling in small holes caused by nails and minor dings from normal wear and tear most performed between the time a tenant vacates a unit and a new renter assumes occupancy., • Painting: includes minor touch-ups following damage repair and new coats of paint applied to unit walls between the time a tenant vacates a unit, and a new renter assumes occupancy., • Appliance repair: includes the repair, replacement or installation of major household appliances, such as refrigerators, dishwashers, range ovens, washers and dryers, and air conditioners., • Grounds keeping includes mowing grass, pulling weeds, trimming and pruning trees and shrubs, watering lawns and plants, replacing light bulbs along pathways and parking areas, sweeping or raking leaves, and tidying up bark or other ground covering., • Cleaning/housekeeping includes maintaining a tidy appearance in shared community locations, such as the leasing office lobby, clubhouses, and fitness or recreational areas. Also includes cleaning fixtures, floors and other surfaces in vacated units before new renters assume occupancy., • Snow removal: includes shoveling, blowing or plowing snow away from covered walkways and driveways, and laying down rock salt atop icy surfaces to prevent slipping., • Customer service: includes professional, prompt and courteous correspondence with renters when scheduling and providing maintenance services, and with contracted vendors that provide additional facility services., • Time management: includes maintaining an organized scheduling and tracking system, usually on a computer, to effectively complete all maintenance requests in a timely manner and in the order by which they were received or by level of urgency., • Represent the Company in a professional manner as reflected by personal appearance, attention to detail, jobsite cleanliness, customer service and safety., • Document and record all work, purchases, deliveries, accidents, and any other related items in a timely, professional manner., • Respond to emergencies as needed including nights and weekends, being on-call with a cell phone., • Record all inspections and related maintenance on appropriate forms in an accurate and timely manner., • Prioritize all work to minimize vacancy loss, prevent property damage, and provide service to residents., • Inventory Control: Be knowledgeable of inventory levels of spare parts and supplies and inform the Superintendent of shortages., • Appearance: Neat, clean well-groomed appearance, • Education: High School Graduate or G.E.D. Read, write, & speak English, • Proficient knowledge: Knowledge of carpentry and building maintenance, safe operation of basic hand and power tools, oil burner systems, heating and ventilation systems, electrical systems, appliance maintenance and maintenance, workplace safety and safe lifting and handling procedures, as well as the knowledge of when to contact qualified service personnel., • Skills: An employee in this position must be knowledgeable and skilled in a variety of trades (see above), • Abilities: Applicant must have the physical strength to lift cleaning materials and heavy equipment, physical stamina for being on their feet all day, • Other characteristics such as personal characteristics: Interpersonal skills are necessary for interacting with building occupants and other staff members., • Professional Certification: FDNY certificates of fitness for operating a low-pressure boiler, residential sprinkler systems helpful., • Experience: 3 years’ experience in general building maintenance., • Excellent problem solving and conflict resolution skills., • Experience working with people of different income levels and ethnic backgrounds. The building maintenance worker has a physically strenuous and demanding job. He/she will be lifting, pulling and managing heavy equipment and objects. The building maintenance worker will have to work in all weather conditions and must be prepared for both extreme heat and cold. • Have constant need (66% to 100% of the time) to perform the following physical activities:, • Bend/Stoop/Squat/Kneel: Perform routine maintenance/repairs, pick up tools and needed equipment., • Climb Stairs: Service requests, make-ready needs for 2nd and 3rd floor apartments., • Push or Pull: Move equipment, appliances, open and close doors, etc., • Reach Above Shoulder: Perform routine maintenance/repairs, stock and remove equipment, parts, etc., • Climb Ladders: Perform routine maintenance/repairs., • Grasp/Grip/Turning: Handle tools and equipment, perform routine maintenance/repairs., • Finger Dexterity: Handle tools and equipment, perform routine, • Lifting/carrying (supplies, replacement parts, ladders, etc.):, • Over 150 lbs.: Rare need (less than 1% of the time), • 75 – 150 lbs.: Occasional need (1% to 33% of the time), • 25 – 75 lbs.: Frequent need (33% to 66% of the time)

Job Description Duties: The General Maintenance Mechanic performs a variety of maintenance and engineering duties for the hospital's Facilities Department. Would be assigned to work for the Engineering Manager or the Maintenance Planner / Coordinator on a regular basis May also be assigned at times to receive guidance and instruction from a senior mechanic. May also be assigned at times to receive guidance and instruction from the A.D.N. or Facilities Supervisor on call. Incumbent is guided by a comprehensive and proven skill in the basic knowledge of building trades, which could include carpentry, paintint, electrical, plumbing, HVAC and mechanical repairs, plaint maintenance methods, techniques, procedures, and operation and use of department equipment and supplies. Performs a variety of duties in maintaining, repairing and renovating plant and facilities. Performs a variety of building service duties. Services as a member of facility's fire response team. Assists in removing snow from facility's grounds and maintains grounds as required. 9am - 5pm 25 -32 hours/week

Job DescriptionBenefits: • 401(k), • Dental insurance We are seeking a talented Commercia Laundry Mechanic to join our team. The Commercial Laundry Mechanic has overall responsibility for the daily repair and preventative maintenance of industrial textile processing equipment and facility maintenance. The Commercial Laundry Mechanic ensure that tasks such as start-up and shut-down procedures, electrical troubleshooting, maintaining and operating boilers, welding and cutting, hydraulics, pneumatics, mechanical, or other systems are completed according to policies and procedures. As well as completing daily production workload in a timely manner, consistently providing quality standards in all areas of laundry operations. Duties include but are not limited to: • Maintain, service, and repair all models of commercial laundry equipment including but not limited to washers, driers, ironers, boilers, extractors, presses, stackers, and other machinery used., • Troubleshoot electrical, mechanical, and plumbing, issues and rebuild pumps, valves, regulators as needed while utilizing an excellent understanding of steam/thermal systems., • Diagnoses problems, replaces or repairs parts, tests and makes adjustments., • Inspect, maintain, repair, and service water treatment plant machinery and equipment, including pumps, valves, valve actuators, motors, engines, meters, drives, tanks, reservoirs, compressors, chemical feed and storage systems, UV disinfection systems, heating and air conditioning systems, and other equipment typical of a water treatment facility., • Install and rebuild pumps, motors, piping systems, and specialized water treatment equipment., • Fabricate parts and equipment; operate welding, cutting, and general fabrication equipment., • Pack, lubricate, clean, and paint mechanical equipment and motors., • Inspect newly installed mechanical equipment to ensure safe and satisfactory operation and functionality., • Ensures work is performed safely and efficiently., • Read and interpret technical operation and repair manuals., • Effectively participate with preventive maintenance schedule on all laundry equipment., • Establish an organized laundry inventory system for purchasing of all parts & materials., • Provide technical training to the laundry team. Maintain a constant awareness of safety problems and report unsafe conditions and exposures to laundry manager., • Must understand and adhere to all safety procedures., • Effectively manage daily maintenance requests to minimize equipment down-time and continually improve operational processes., • Strictly adhering to all safety rules, policies and procedures required by Alsco, law, and what is recognized as common practice in the industry., • Keep accurate and timely records of maintenance performed., • Follow written and verbal instructions and perform other tasks as directed by supervision., • Interact with all colleagues in a professional manner, • Comply with all Federal, State and local laws., • Working on boiler and fan systems, • Maintaining logs, records and reports of serviced equipment, • Qualifications:, • Minimum of 3 years hands on experience in a laundry maintenance or similar operation, • Must be able to maintain high levels of confidence., • Maintain a working knowledge of policies and procedures and their proper application., • Minimum of five years maintenance engineering experience with specific knowledge of machinery, electricity, electronics, plumbing, hydraulics, pneumatics, welder and boiler applications., • Quantifiable working knowledge of Weishi systems, dyers, folders, sorting, binding, etc. equipment preferred, • Ability to troubleshoot issues in a timely manner, • Ability to shift priorities and changing demands, • OSHA compliance, • Must be able to stand for long periods of time; able to bend, stretch reach and stoop on a continual basis Typical Physical Activity Standing, sitting, walking, stooping, driving a forklift, working on ladder, being in elevated height to perform work, grasping, moving equipment, pushing, pulling, moving loaded carts weighing up to 500 lbs, reading, speaking, hearing, and lifting up to 60 lbs. Occasionally stoop, bend, kneel, crouch, crawl, reach, and twist; push, pull, lift, and/or carry moderate to moderately heavy amounts of weights; operate assigned equipment and vehicles; ability to verbally communicate to exchange information. Typical Environmental Conditions Inside and outside areas of a typical industrial laundry facility, which includes working with and around large machinery, variations in temperature, noise, odors, humidity, lint and dust, in general offices or on outside grounds. Water treatment plant and field environment; exposure to noise, dust, grease, fumes, gases, potentially hazardous chemicals, electrical energy, and inclement weather conditions, including hot, cold, wet, and/or humid conditions; work around water; work on slippery, uneven, surfaces; work in confined spaces; routinely climb ladders, stairs; regularly work near moving mechanical parts; and work around moderately loud noise levels; incumbents must be available to work variable shifts, including evenings, nights, weekends and holidays.

Job DescriptionSalary: $50,000 MAINTENANCE MECHANIC This position is responsible for maintaining the physical integrity of the property at all times. This involves insuring a safe and secure living environment for residents, visitors and staff. It is the duty of the Maintenance Mechanic to follow all directives given by the Facility Manager and Real Estate Asset Manager. * Maintain a safe environment * Cultivate resident satisfaction * Protect the investment of the * Complete or abate all emergency work orders within 24 hours * Complete all urgent work orders within 48 hours * Complete all routing work orders with in 72 hours Duties and Responsibilities * Conduct all business in accordance with the NHA policies and procedures, state and federal laws, OSHA, ADA, fair housing etc. Perform activities to maintain the continuity of essential environment services in order to guarantee resident comfort and security. * Conduct building walk-downs daily and replace all burnt out bulbs from hallways and stairwells and batteries in emergency lighting as needed * Maintain curb appeal of the property at all times. * Trash-out vacant units within 48 hours * Complete assigned work orders according to company guidelines * Strip and wax assigned floors quarterly * Monitor supplies and advise supervisor of items needed as necessary * Respond to after hour emergency calls when necessary. Preventive Maintenance/Safety * Follows NHA guidelines in proper storage of chemicals, maintaining maintenance data sheets current and readily accessible * Must be aware of the condition of physical property throughout the property and immediately report unsafe conditions, e.g., broken steps, open holes, broken/burned exterior, broken (doors locks, inoperable smoke detectors, gas leaks). * Performs minor and routine maintenance on all appropriate equipment on a regular basis, inspects and maintains all tools in excellent condition * Instills a safety first attitude not only with maintenance but also with all residents * Follows NHA guidelines for wearing safety items * Maintain accurate records regarding preventive maintenance, service request (received and completed), vacancy reductions status, work in progress, etc. * Trains Janitors helpers in various areas of repairs, cleaning, etc. * Assist in the completion of annual inspections General * Performs electrical repairs on items such as appliances, fixtures, switches, outlets, circuits, etc. * Performs plumbing work, such as clearing stoppages, replace fittings, etc. * Replace broken glass, tile, carpet, screens, garbage disposals, fixtures, appliances, blinds, locks, etc. * Performs carpentry work such as fitting doors, freeing windows, replacing and buildings shelves, stripping and waxing floors. * Assists in custodial work, including sweeping, mopping, vacuuming. Emptying trash, cleaning windows, etc. * Assist with grounds work when necessary * Performs limited exterminating services when required * Participates in a standby emergency schedule for evening, weekend, and holiday coverage * Is responsible for stock control and utilization of maintenance materials * Performs scheduled maintenance on all equipment based on the manufacturers recommendations and operating manuals * Has knowledge regarding water and gas cutoffs, all apartments and fixtures cutoffs and sewer cleanouts * Has constant knowledge regarding contracts and suppliers, their services and goods * Assist with move-in and move-out inspections * Makes sure that all apartment repairs and services are completed correctly and in a timely manner * Reports all major repairs and requisitions to senior site staff * Removes and transfers heavy appliances and equipment form storage area to apartment (or visa versa) as necessary * Complete unit trash out within 48 hours * Performs work area clean up and safety related duties * Performs any additional duties as assigned by NHA senior staff Qualifications * High school education or equivalent * Five to seven years of related experience is required to acquire a thorough knowledge of low-pressure gas/oil fired boilers, central and unitary air conditioning, domestic water, electrical, plumbing and life safety systems. * Valid drivers license * Full time maintenance experience or experience in related field * In-depth working knowledge of general maintenance practices and repairs (tile, concrete floors, painting, plastering and drywall patching, basic carpentry and appliance repairs * Maintenance experience or related field * Maintain open lines of communication with internal and external contracts for continuing operations and resolution of problems. Internal contacts include company personnel on site or off and residents * Concern for work safety programs * Ability to assist management in daily duties * Must acquire a State of New Jersey Black Seal License within 1 year of employment Vision Requirements: Constant need (66% to 100% of the time) to document maintenance and complete forms, review manuals and operating instructions, read cautionary labels, respond to written instructions from staff and complaints fro residents. Constant need to see small details when performing routine maintenance duties. Hearing Requirements: Constant need (66% to 100% of the time) to communicate with staff, residents, vendors, and must use listening skills to diagnose needed repairs, etc. Speaking Requirements: Constant need (66% to 100% of the time) to verbally communicate with assistants, residents vendors, NHA and resident. Equipment Required: Require to wear back support, safety shoes, wear goggles when working with specific equipment, wear masks and gloves arid other safety equipment as tasks dictate. Work Hours: 40 hours per week. Weekend circumstances warrant on call on a rotating basis for emergencies Equipment/Machinery/Tools: An employee in this position must be knowledgeable and skilled in the safe use and maintenance of the following: * Hand tools Various wrenches, hammer, grips, saws, sledgehammer, snips, post hole digger etc. * Power tools Wrenches, grinders, sanders, drills, saws, key machines, etc. * User moved aids wheelbarrows, dollies, hand tricks, buckets, hoist, jacks, step ladders, double ladders. Physical Requirements: Constant need (66% to 100% of the time) to be on feet have constant need (66% to 100% of the time) to perform the following physical activities: • Climb Stairs Ability to climb flights of stairs in order to handle service requests Make ready needs * Release elevators when necessary * Conduct building walk downs * Assist in emergencies Push or pull Move equipment Reach above shoulder Perform routine maintenance/repairs, stock and remove equipment Climb ladders Perform routine maintenance/repairs Grasp/Grip/Turning Handle tools, equipment, perform routine maintenance/repairs Finger dexterity Handle tools and equipment, perform routine maintenance/repairs Writing Inventory maintenance, requisition request, required maintenance reports Lifting, carrying (supplies, replacement parts, ladders, etc.) Over 150 lbs Rare need (less than 1% of the time) 75-150 lbs Occasional need (1% to 33% of the time) 25-75 lbs Frequent need (33% to 66% of the time) 1 -25 lbs Constant need (66% to 100% of the time) NOTE: Lifting and carrying of weights exceeding 50 lbs is often accomplished with assistance from one or more persons. Examples: Washer, dryers, refrigerators, A/C units, abandoned furniture, etc. Working Environment * Indoors (66% to 100% of the time), frequent outdoors (33% to 66% of the time), all conditions, often for extended periods * Occasional exposure (1% to 33% of the time) to paint fumes, solvents, adhesives, etc. * Frequent need (33% to 66% of the time) to work in awkward and confining positions Reasoning Development: High Moderate - Must be able to apply logical thinking to define problems, collect pertinent information, establish facts, and draw valid conclusions and initiate proper course of action. Must effectively convey ideas, images and goals to a variety of practical situations and accurately follow standardized procedures that may occasionally call for minor deviation. Need to think rationally beyond a specific set of instructions, must effectively work within a diverse group of personalities.

Job Description Uptime champion sought: Are you ready to lead from the front? Imagine joining a food company started by two heart surgeons who believed better eating should be simple. That’s been our trajectory since 1994 at Dr. Praeger’s—keeping ingredients straightforward, flavors craveable, and prep effortless. Our heritage still guides us. Read the story at drpraegers.com. Picture this challenge A conveyor hiccups. A PLC input flickers. Production is watching the clock. You triage, reassign the crew, dive into diagnostics, adjust a VFD parameter, and coach a tech through sensor calibration—all while lining up parts with the Maintenance Coordinator and scheduling a PM for the next window. You’re the translator between mechanics and supervisors, turning complexity into clarity and results. Your mission • Technical excellence: Troubleshoot and repair motors, pneumatics, conveyors, and production machinery; use precision instruments to diagnose mechanical, electrical, and control issues; program/tune PLCs, VFDs, and HMIs; perform high-voltage work safely; fabricate components when needed; keep your skills sharp through ongoing training., • People leadership: Lead a team of mechanics; assign and follow up on work; provide hands-on guidance for complex challenges; onboard and develop new hires; collaborate on schedules to align maintenance with production; model accountability, teamwork, and continuous improvement; communicate priorities to Production and leadership., • Operational rigor: Build and run maintenance procedures and schedules; manage tools/parts inventory and procurement with the Maintenance Coordinator; uphold food safety, quality, SOP, and GMP standards; conduct safety inspections and support accident investigations with corrective actions; document logs, reports, and updates in the CMMS. What makes you effective here, • 5+ years of relevant hands-on maintenance experience (mechanical + electrical)., • Technical or university degree preferred; equivalent experience accepted., • Leadership that teaches, motivates, and elevates others., • Bilingual fluency in English and Spanish to connect with a diverse team., • Expertise in PLC hardware/troubleshooting and programming, control circuits, and high-voltage systems., • Bonus familiarity: plumbing, HVAC, and refrigeration., • Proficiency with Microsoft Office and maintenance management software., • Safety-first mindset and dedication to quality. Physical reality of the work, • Frequent plant walk-throughs to assess equipment health., • Hands-on maintenance with lifting up to 50 lbs., • Extended time on the production floor in a fast-moving environment. Career ladder clarity, • Mechanic: Specialist in execution of maintenance tasks and repairs., • Team Lead: Hybrid role—expert technician plus team leadership and coordination. *Dr. Praeger's Sensible Foods is an Equal Opportunity Employer that does not discriminate based on actual or perceived race, creed, color, religion, alienage or national origin, ancestry, citizenship status, age, disability or handicap, sex, marital status, veteran status, sexual orientation, genetic information, arrest record, or any other characteristic protected by applicable federal, state, or local laws. Our management team is dedicated to this policy with respect to recruitment, hiring, placement, promotion, transfer, training, compensation, benefits, employee activities and general treatment during employment.

Job Description We're hiring for entry-level automotive roles at Carvana - the fastest-growing used automotive retailer in U.S. history and one of the four fastest companies to make the Fortune 500. We're looking for enthusiastic, energetic, and self-motivated team players to: • Ensure each vehicle is inspected for mechanical, drivability or cosmetic concerns, • Wash and vacuum all inventory on a regular basis, • Complete multi-point inspection on arriving inventory to include fuel level, safety features, drivability test and proper display of all company and state disclosures, • Maintain positive relationships with coworkers and external vendors, • Interact and communicate with team members and management across all lines of the business., • Must adhere to regular and predictable attendance. General qualifications and requirements • Ability to physically operate vehicle equipment and tools - must be able to lift up to 60 pounds independently, • Must be at least 18 years of age and possess a valid driver's license. Some positions may be subject to an Motor Vehicle Records (MVR) check, • An ability to work in a fast-paced, ever-changing production environment while sometimes being exposed to excessive weather conditions (heat/cold), • Use of safety equipment that may include but not limited to face shield or goggles, non-slip shoes, gloves, mask, and other protective garments and equipment At Carvana, you'll receive a competitive wage and amazing perks – including a 401(k) with Carvana match and even a vehicle purchase discount – all while using state of the art tools in one of our high-tech Inspection Centers (click here to learn more). If you're joining us in an entry-level position, we offer training programs to make sure your skills and pay progress along with the company. Pay rate: $19 per hour Other perks of the Job • 100% company-paid healthcare premiums, • Generous paid-time off and your birthday is a holiday!, • ASE and tool reimbursement programs, • Tuition reimbursement and student loan repayment Schedule: Monday - Friday 7am-4pm We do everything we can to deliver an exceptional customer experience, and that includes delivering great vehicles when expected. If we're in a pinch, mandatory overtime is one way in which we can follow-through on this commitment to our customers. We're looking for team players who are all in on our mission and are able to work mandatory overtime based on our business needs. How To Get Started - join the Carvana team by applying on this page! We also have a variety of other automotive roles available in one of our many locations across the country – take a look at our Careers site to apply for one of the following roles: • Auto Body roles: Paint, Prep/Body work, Wheel Repair, Airbrush, Interior Repair, Glass Repair, and PDR (Paintless Dent Repair) roles, • Auto Technician/Mechanic roles: Lube and Oil, Inspection, Brake and Tire, Mechanical Repair / Build, and Master Technician roles To make sure our cars are in first-rate condition, we've built multiple vehicle Reconditioning Centers around the country, where our cars are inspected, perfected, and photographed before reaching the Carvana website. Think you've got what it takes to join our team? Apply today! Carvana is an equal employment opportunity employer. All applicants receive consideration for employment without regard to race, color, religion, gender, sexual orientation, gender identity or expression, marital status, national origin, age, mental or physical disability, protected veteran status, or genetic information, or any other basis protected by applicable law. Carvana also prohibits harassment of applicants or employees based on any of these protected categories. Hiring is contingent on passing a complete background check. This role is not eligible for visa sponsorship. Must be at least 18 years of age and possess a valid driver's license. Must be able to read, write, speak and understand English.

Job Description JOB TITLE: MAINTENANCE MECHANIC FLSA: NON-EXEMPT DIVISION: SERVICES - FACILITIES REPORTS TO: FACILITY MANAGER LOCATION: BROOKLYN, NY SALARY: $45,000.00 SUMMARY: The Maintenance Mechanic performs all necessary interior and exterior facility repairs including plumbing, electrical, HVAC, carpentry, window, and lock work of a 200 bed men’s homeless shelter. Keeps facility in working order using troubleshooting techniques and performing repairs as necessary. Fills in for Custodian/Driver in his/her absence and on designated shifts. Reports to the Lead Mechanic. Scheduled hours of work will vary based on the needs of the facility. Weekend and evening hours are required. Proof of COVID-19 vaccinations required. DUTIES & RESPONSIBILITIES: • Escorts outside contractors, inspectors and other visitors and accepts deliveries as needed, • Responsible for all repairs in building and on grounds, • Troubleshoots and repairs includes light electrical and plumbing (outlets, switches, light fixtures, washers, seats and stems; drain lines; sinks; tubs; and toilets. Clears stoppages, • Performs HVAC troubleshooting and servicing including cleaning units/replacing filters, • Makes repairs to damaged sheetrock and plaster. Sands and paints as necessary, • Repairs/replaces windows, doors, locks and flooring; assembles/repairs/installs room furniture, • Repairs any client damage to rooms, furniture or room fixtures, • Responsible for all mechanical work on room turnovers and for work orders for occupied rooms, • Completes preventative maintenance checklists as directed by Supervisor, • May assist as needed with transfers or packing and storing of residents’ belongings, • In the absence of Custodian/Driver, performs all necessary custodial duties, • In the absence of Custodian/Driver, drives agency vehicles to transport clients and materials High School Diploma or GED with English and Math skills required. Trade/Technical School training a plus. Two (2) years mechanical experience and experience with floor care equipment and procedures necessary. Valid NYS Driver license & clean record required. AGENCY PROFILE & EMPLOYEE EXPECTATIONS Westhab is a prominent community development organization, providing housing and supportive services for more than 10,000 of the most vulnerable members of our community each year. We are staffed by an extraordinary group of hard-working professionals that are fully committed to our mission - Building Communities. Changing Lives. Working at Westhab is not easy. Our expectations for all staff are high. We believe that the people and the communities that we have the privilege to serve deserve our very best every day. We are a results-driven organization that focuses on empowerment and impact. If you want to apply for this opportunity, it should only be because you feel ready for the challenges and expectations that come with joining this kind of team. (EOE) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION (OSHA): The Occupational Safety and Health Administration (OSHA) ensures safe and healthful working conditions to workers by setting and enforcing standards and by providing training, outreach, education and assistance. Westhab complies with all applicable OSHA standards, rules and regulations in addition to keeping our workplaces free of serious recognized hazards. Powered by JazzHR OaGzeIrsf0

Job Description Are you a mechanical problem solver looking for a rewarding part-time/seasonal opportunity? If so, keep reading about this Snow Equipment Mechanic - Maintenance Tech position with Shaw's Garage! We're hiring an experienced technician to join our skilled team in Florham Park, NJ and earn $20-$35/hour, based on experience. Keep reading to see if this role is right for you! YOUR SCHEDULE This seasonal position works from September through March. You work Monday - Friday, 8:00 am - 5:00 pm, with overtime opportunities available depending on workload. YOUR DAY As a part-time Snow Equipment Mechanic - Maintenance Tech, you service various snow removal equipment and vehicles. With a commitment to accuracy and safety, you install, upfit, repair, and maintain snowplows, salt spreaders, trailer hitches and parts, hydraulic lifts, and other machinery. You complete top-quality work that helps customers get through another snowy winter! WHAT WE NEED FROM YOU • 2+ years of relevant experience, • Ability to diagnose, service, and repair mechanical snow equipment, • Familiarity with equipment brands like Fisher or Western, • Valid driver's license and good driving record, • Ability to provide basic tools and meet the physical demands of the job, including lifting heavy objects, walking, pushing, and standing for long periods of time OUR STORY Since 1977, residents of northern New Jersey have chosen our family-owned business for their automotive and snow equipment needs. Shaw's Garage is proud to be a full-service facility with a team of highly skilled technicians. We specialize in upfitting light-duty trucks, repairing trailers, and servicing snow plows and salter spreaders. New Jersey winters are a serious business! That's why we make it OUR business to sell quality Fisher products, as well as parts for Western and Meyers snow equipment. Whether a customer needs a snow plow, salter, dump insert, or hydraulic lift gate installed on their truck or electrical wiring fixed on their trailer, they know they can rely on us for friendly, professional service! Sometimes people wonder how we've managed to operate a thriving business since the 1970s. What's our secret to success? It's simple: we hire the best people who provide the best service. We count on our team to deliver, and they can count on us! To show our appreciation, we offer great benefits, employee discounts, and a team-oriented environment. If you're looking for a career with a well-established company, join Shaw's Garage! WE CAN'T WAIT TO HEAR FROM YOU Join us this winter as our new part-time Snow Equipment Mechanic - Maintenance Tech! Apply for this seasonal position today with our short initial application. Job Posted by ApplicantPro

Job Description LEAD BUILDING MECHANIC Full Time / NY, NY Work Assignment: Bulova Corporate Center We are seeking a Lead Building Mechanic, to be directed by the Chief Engineer and supervised by the Property Manager, to oversee and perform all facility maintenance tasks. General Statement of Duties and Responsibilities: The Lead Building Mechanic oversees and performs all facility maintenance and upkeep. They shall follow a preventative maintenance program, inventory control, and the operation of all HVAC and MEP site equipment. They shall collaborate closely with management and other team members to deliver services and shall supervise technical service providers to ensure compliance with building performance specifications. The Lead Building Mechanic shall report to the Chief Engineer and or Property Manager. Required Qualifications and Experience: We are seeking candidates with 5-7 years of related experience. Candidates must possess or be willing to obtain any building required NYC licenses within (6) months of hire date. They must have completed a trade apprenticeship or technical training, and a high school diploma is required. Responsibilities include, but are not limited to the following: • Perform building repairs and maintenance of all mechanical, electrical, and craft services to ensure operation within design capabilities and achievement of proper environmental conditions as prescribed by the Property Manager., • Oversee the efficient operation of facility equipment and systems., • Communicate with management regarding matters related to services performed., • Assist the Chief Engineer to oversee that tenant improvements are performed safely and efficiently., • Work with the Chief Engineer to administer an effective and accountable preventative maintenance system tailored to the facility., • Regularly evaluate all equipment and systems, providing Management with a list of deficiency items and recommendations for improvement., • Possess licenses and permits required by local laws and ordinances to operate, repair, and maintain the facility's equipment and systems., • Monitor and adjust the Building Management System (BMS)., • Operate fire life safety systems., • Be available on-call for emergencies related to the operations of the building., • Operate, maintain, and repair all HVAC equipment which includes, but is not limited to: compressors, motors, condensers, evaporators, steam traps, pumps, expansion valves, refrigerant lines and devices used to control temperature, and air conditioning systems in their entirety, including the use of approved recovery equipment and processes to comply with all laws and regulations., • Inspect building automation systems for HVAC, lighting, and energy tracking devices., • Inspect electrical motors and engines used to power pumps, compressors, and fans., • Inspect electrical/control systems, all motor controls and related equipment drivers such as variable frequency drives (VFD's)., • Maintain and upkeep equipment / mechanical rooms., • Perform daily rounds of facilities., • Enter and complete Work Orders., • HVAC: Inspect, diagnose, and troubleshoot HVAC systems. Complete routine preventive maintenance and repairs, including changing filters, belts, checking fluid levels, adjusting space temperatures, diagnosing and repairing VAV boxes, heat pumps, changing motors, calibrating and repairing pneumatic systems, etc., • Electrical: diagnose electrical issues, troubleshoot, changing lights, ballasts, performing minor repairs., • Plumbing: bathrooms repairs, soldering, snake drains, replace flushometers., • Perform any additional duties on as required, • Must be able to work independently with little supervision, • Safety awareness, • Ability to lift more than 50 lbs., • Ability to climb a ladder., • Ability to work with hand and power tools, • Good time management, • Ability to use Microsoft Office programs (Excel, Outlook, PowerPoint, and Word), • Ability to clearly communicate in writing and verbally, • Ability to present technical information, • Experience operating Building Management System (BMS), • Advanced understanding of HVAC Systems, • S-12 City Wide Sprinkler System, • S-13 City Wide Standpipe System, • F-60 Certificate of Fitness for Fire Guard for Torch Operations, • EPA/CFC Universal Certification, • Q-01 NYC Refrigeration Machine Operators License, • F-19 Sprinkler Systems with Gravity and Pressure Tanks, • G-38 Torch Use of Flammable Gases for Cutting and Welding, • G-60 Certificate of Fitness for Torch Use of Flammable Gases, • S-14 Standpipe for Multi-zone System, • F-89 Fire, Life, Safety Director, • S-95 Supervision of Fire Alarm Systems Employee contributions and waiting periods may apply: • 401(k), • Medical, • Dental, • Life and Accidental Death Insurance, • Short and Long Term Disability Insurance, • Flexible Spending Account

Job DescriptionBenefits: • Health insurance, • Paid time off Job Summary: We are seeking a skilled Hydraulic Repair Mechanic to join our team. As a Hydraulic Repair Mechanic, you will be responsible for diagnosing and repairing various types of hydraulic equipment and machinery. Your expertise will ensure that our products function optimally and meeting customer satisfaction. Duties: • Diagnose, repair, and maintain hydraulic systems, including pumps, cylinders, valves, and hoses. Knowledge of tools, parts, and equipment., • Inspect, troubleshoot, and diagnose equipment issues, • Perform repairs and replacements of faulty components, • Conduct routine maintenance to prevent future breakdowns, • Collaborate with team members to identify and implement improvement opportunities, • Keep accurate records of repairs, parts used, and maintenance performed, • Maintain inventory of hydraulic components and spare parts, • Follow safety protocols and maintain a clean work environment, • Interact with clients to understand their hydraulic system needs, • Coordinate with suppliers for timely procurement, • Some local travel to support service calls Experience: • Proven experience as a Hydraulic Mechanic Technician or similar role, • Proficient in using diagnostic tools and equipment, • Ability to read technical manuals, schematics and blueprints, • Excellent problem-solving skills, • Detail-oriented with a focus on quality workmanship, • Welding experience a plus, • Managerial skills a plus Skills: • Strong technical aptitude, • Strong analytical and troubleshooting abilities, • Effective communication skills, • Ability to work independently or as part of a team, • Time management skills to prioritize tasks effectively We offer competitive pay based on experience and skills. Occasional overtime available. Benefits package includes health insurance and paid time off. If you have the required experience and skills for this position, we would love to hear from you. Please submit your resume for consideration.

Job DescriptionBenefits: • 401(k), • Dental insurance, • Health insurance Responsibilities: • Repair, install, and adjust industrial machinery and pipeline distribution systems, • Troubleshoot and repair defective equipment, • Perform routine preventative maintenance, • Respond to work order requests in a timely fashion, • Adhere to all safety policies and proceduresQualifications:, • Previous experience in machinery or other related fields, • Strong mechanical aptitude and troubleshooting skills, • Familiarity with industrial tools and equipment, • Ability to handle physical workload

Job Description Job Summary: As a Hydraulic Repair Mechanic, you will be responsible for diagnosing and repairing various types of hydraulic equipment and machinery. Your expertise will ensure that our products function optimally and meeting customer satisfaction. Duties: Diagnose, repair, and maintain hydraulic systems, including pumps, cylinders, valves, and hoses. Knowledge of tools, parts, and equipment. Inspect, troubleshoot, and diagnose equipment issues Perform repairs and replacements of faulty components Conduct routine maintenance to prevent future breakdowns Collaborate with team members to identify and implement improvement opportunities Keep accurate records of repairs, parts used, and maintenance performed Maintain inventory of hydraulic components and spare parts Follow safety protocols and maintain a clean work environment Interact with clients to understand their hydraulic system needs Coordinate with suppliers for timely procurement Some local travel to support service calls Experience: Proven experience as a Hydraulic Mechanic Technician or similar role Proficient in using diagnostic tools and equipment Ability to read technical manuals, schematics and blueprints Excellent problem-solving skills Detail-oriented with a focus on quality workmanship Welding experience a plus Skills: Strong technical aptitude Strong analytical and troubleshooting abilities Effective communication skills Ability to work independently or as part of a team Time management skills to prioritize tasks effectively We offer competitive pay based on experience and skills. Occasional overtime available. Benefits package includes health insurance and paid time off. If you have the required experience and skills for this position, we would love to hear from you. Please submit your resume for consideration

Job Description Power-Flo Technologies' Pump and Motor Repair Shop in New Hyde Park, NY is seeking an experienced Pump and Motor Mechanic to join our team. Pump and Motor Mechanic Responsibilities Include : • Assess machinery to accurately diagnose and repair issues, • Liaise with clients to determine their requirements and communicate defects or problems, • Provide routine inspections of equipment and inform clients of any issues, • Keep an accurate log of all work performed, • Install replacement bearings, seals, shafts, and gaskets, • Replace and wire electric motors, • Adhere to company work safety policies, • Complete jobs both in our shop and at job sights, • Respond to work orders for troubleshooting, repair and feedback to Supervisor, • Mechanic will be responsible to make emergency repairs within area of knowledge and responsibility, • Familiarity with hand tools, power tools, disassembly, multimeter, etc. Pump and Motor Mechanic Qualifications : • 5+ years experience in pump mechanics, • Knowledge of pump systems and electric motors, • Ability to work both with a team and independently, • A valid and clean driver's license to operate company vehicles This role is Monday to Friday. Usual hours are 7:00 am to 3:30 pm with overtime opportunities. Salary Range (commensurate with experience and skills): $20 - $37/hour Competitive Benefits Package • Health insurance (medical, dental, vision), • PTO program and paid holidays, • EAP, • 401K with employer match, • Company provided life insurance (after 1 year of employment) We are an equal opportunity employer. Applicants must be authorized to work for ANY employer in the US. We are unable to sponsor or take over sponsorship of employment Visa currently. Power-Flo Technologies and its subsidiaries participate in the USCIS E-Verify Program to verify that all new hires are authorized to work in the United States. Power-Flo Technologies is a unique Family of Companies consisting of distributors, fabricators, manufacturers and motor and pump repair firms serving the New York metropolitan and New England areas. We are a Master Distributor and Manufacturers Representative with REAL SYSTEMS SOLUTIONS.

Job Description We are currently looking for an Industrial Maintenance Mechanic to join our facility in Jersey City, NJ. Job Summary Repairs and maintains machinery and mechanical equipment such as pneumatic tools, conveyor systems, and production machines and equipment by performing the duties outlined below. Major Job Responsibilities/Duties • Observes mechanical equipment in operation to locate causes of trouble., • Diagnoses equipment failures and provide recommendations for proper repair course of action., • Dismantles equipment to remove and replace defective parts., • Adjusts functional parts of equipment and control instruments., • Ensure that all equipment complies with OEMs and Regulatory Agencies operating standards, Ensures proper equipment lubrication in compliance with OEMs lubrication schedule., • Follows Preventive Maintenance Work Order procedures. Educational Background • 1 year minimum mechanical repair related experience in a heavy industrial setting or equivalent combination of education and experience. Working conditions/physical demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is regularly required to stand and reach with hands and arms. The employee is frequently required to walk; use hands to finger, handle, or feel; climb or balance and stoop, kneel, crouch, or crawl. The employee is occasionally required to sit and talk or hear. The employee must regularly lift and /or move up to 25 pounds, frequently lift and/or move up to 50 pounds and occasionally lift and/or move up to 100 pounds. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception and ability to adjust focus. While performing the duties of this Job, the employee is regularly exposed to moving mechanical parts; and outside weather conditions. The employee is frequently exposed to high, precarious places and vibration. The noise level in the work environment is usually loud. Additional Comments Disclaimer: The above statements are statements are intended to describe the general nature and level of being performed by employees assigned to this classification. They are not intended to be construed as an exhaustive list of all responsibilities, duties, skills. With a promote-from-within philosophy and a variety of programs available to support continuous learning, Balcones Recycling offers the opportunity for a rewarding career. We are committed to the ecologically sound and sustainable use of resources and strive to operate in a manner that minimizes waste and protects the environment. A career with Balcones Recycling provides you with the opportunity to work with an organization whose goal is to be the world’s safest and most responsible recycling company. Our people achieve this by creating a zero-harm workplace, being exemplary members of the communities in which we operate and being responsible stewards of the environment. We also offer competitive pay and a range of attractive benefits. Find Out More… Please visit Balcones Resources - Sustainable Future Through Recycling (balconesrecycling.com) for more information on Balcones Recycling and its commitment to sustainability. Circular Services is an Equal Opportunity Employer and Prohibits Discrimination and Harassment of Any Kind: Circular Services is committed to the principle of equal employment opportunity for all employees and to providing employees with a work environment free of discrimination and harassment. All employment decisions at Circular Services are based on business needs, job requirements and individual qualifications, without regard to race, color, religion or belief, national, social or ethnic origin, sex (including pregnancy), age, physical, mental or sensory disability, HIV Status, sexual orientation, gender identity and/or expression, marital, civil union or domestic partnership status, past or present military service, family medical history or genetic information, family or parental status, or any other status protected by the laws or regulations in the locations where we operate. Circular Services will not tolerate discrimination or harassment based on any of these characteristics. Job Type: Full-time Benefits: • Dental insurance, • Health insurance, • Vision insurance, • Paid time off, • Vacation, • 401K, • Annuity Ability to commute/relocate: • Jersey City, NJ: Reliably commute or planning to relocate before starting work (Required)

Job Description Line Engineer (Maintenance Technician) Location: Brookville Hotel @ JFK NEW YORK CITY 154-71 Brookville Boulevard | Rosedale, NY 11422 SUMMARY: Keep all equipment in good repair with a minimum of downtime by providing day-to-day maintenance of the hotel under the direction of Engineering Management. Continually work towards and support the improvement of engineering service to both guests and associates. RESPONSIBILITIES: • Report to work on time and in full uniform., • Train and instruct other members of the staff through sharing of knowledge and skills., • Operate as an independent mechanic by analyzing problems, identifying courses of action, and implementing solutions with available resources and to a high degree of quality., • Keep accurate completion and task records in the project files. Set an example of continuous self-development., • Plunging toilets, unclogging drains, repairing all types of hardware, plumbing, and electrical equipment including lamps, air conditioners and cosmetic items., • Clean, lubricate, protect, and otherwise maintain all tools and equipment in the hotel. See that all tools used are returned to the shop and secured in proper storage area., • To protect and otherwise maintain your assigned tool pouch and its tools at the discretion of the Engineering Management., • Monitor systems as necessary, to be fully informed of the system operation and to handle emergencies involving the systems., • Have a working knowledge of fire sprinkler and emergency power systems. Observe and analyze energy and utilities usage in the hotel and on the grounds., • Look for ways to conserve energy and report any ideas to the Engineering Management., • Be available for any emergencies and act in an engineering capacity to protect our guests and associates, and preserve the building and its systems during the emergency., • To act as quickly and responsibly as possible to return the building to its normal operating status. To inform Engineering Management of any such emergencies., • Be aware of all existing departmental Job Safety Analysis and to strive to work in an accident-free manner and to create a safe work environment for others., • Continuously look for conditions which may endanger associates or guests of the hotel and to take immediate action to correct any hazardous conditions found., • Read, log, track, and interpret readings from meters, gauges, and other measuring units., • Maintain a thorough log of each day’s activities and problems that occur and to ensure this information is passed on to other shifts., • Clean all engineering areas as directed by Engineering Management., • Work in a neat and efficient manner, keeping work areas clean and well organized., • Serve as otherwise directed or needed to help maintain the effective and efficient operation of the hotel at the discretion of Engineering Management or the hotel General Manager., • Complete all work assigned in a safe and professional manner. Maintain communications with supervisors to ensure that all needed materials, tools, and supplies are available or on order., • Follow up on any items that may be on back order. Keep supervisor updated on assignments., • Provide training and technical advice to other engineers as needed or requested., • Maintains a working knowledge of all federal, state, and local laws, codes, and regulations., • Maintains a professional image at all times., • Maintains the hotel facility and related equipment in a safe and efficient manner., • Provides for a safe work environment by following all safety and security procedures and rules., • Reads, learns, understands, and refers to the Standard Operating Procedures., • Each associate will be required to follow the rules as found in the M&R Employee Handbook. Performs other duties as assigned by management, of which employee is capable of performing

Job Description Hotel Maintenance Technician (Line Engineer) Pay Rate : $20-$22/hr SUMMARY: Keep all equipment in good repair with a minimum of downtime by providing day-to-day maintenance of the hotel under the direction of Engineering Management. Continually work towards and support the improvement of engineering service to both guests and associates. RESPONSIBILITIES: • Report to work on time and in full uniform., • Train and instruct other members of the staff through sharing of knowledge and skills., • Operate as an independent mechanic by analyzing problems, identifying courses of action, and implementing solutions with available resources and to a high degree of quality., • Keep accurate completion and task records in the project files. Set an example of continuous self-development., • Plunging toilets, unclogging drains, repairing all types of hardware, plumbing, and electrical equipment including lamps, air conditioners and cosmetic items., • Clean, lubricate, protect, and otherwise maintain all tools and equipment in the hotel. See that all tools used are returned to the shop and secured in proper storage area., • To protect and otherwise maintain your assigned tool pouch and its tools at the discretion of the Engineering Management., • Monitor systems as necessary, to be fully informed of the system operation and to handle emergencies involving the systems., • Have a working knowledge of fire sprinkler and emergency power systems. Observe and analyze energy and utilities usage in the hotel and on the grounds., • Look for ways to conserve energy and report any ideas to the Engineering Management., • Be available for any emergencies and act in an engineering capacity to protect our guests and associates, and preserve the building and its systems during the emergency., • To act as quickly and responsibly as possible to return the building to its normal operating status. To inform Engineering Management of any such emergencies., • Be aware of all existing departmental Job Safety Analysis and to strive to work in an accident-free manner and to create a safe work environment for others., • Continuously look for conditions which may endanger associates or guests of the hotel and to take immediate action to correct any hazardous conditions found., • Read, log, track, and interpret readings from meters, gauges, and other measuring units., • Maintain a thorough log of each day’s activities and problems that occur and to ensure this information is passed on to other shifts., • Clean all engineering areas as directed by Engineering Management., • Work in a neat and efficient manner, keeping work areas clean and well organized., • Serve as otherwise directed or needed to help maintain the effective and efficient operation of the hotel at the discretion of Engineering Management or the hotel General Manager., • Complete all work assigned in a safe and professional manner. Maintain communications with supervisors to ensure that all needed materials, tools, and supplies are available or on order., • Follow up on any items that may be on back order. Keep supervisor updated on assignments., • Provide training and technical advice to other engineers as needed or requested., • Maintains a working knowledge of all federal, state, and local laws, codes, and regulations., • Maintains a professional image at all times., • Maintains the hotel facility and related equipment in a safe and efficient manner., • Provides for a safe work environment by following all safety and security procedures and rules., • Reads, learns, understands, and refers to the Standard Operating Procedures., • Each associate will be required to follow the rules as found in the M&R Employee Handbook. Performs other duties as assigned by management, of which employee is capable of performing

Job Description **Maintenance Team Lead ** ** ** **Company History: ** *Dr. Praeger’s was founded in 1994 with the mission of bringing delicious frozen food to everyone. It’s not every day that two heart surgeons get into the food business, but over 20 years ago that’s exactly what our dads did. Motivated by what they saw in their practice, our parents set out on a mission to encourage sensible eating. They knew ingredients had to be nutritious and simple, that everything had to be delicious, and that their products needed to be super simple to make. While the world has changed since our little family business first got started, our focus remains true to our dads’ vision, and we work every day to make them proud. To learn more visit: [drpraegers.com *]() Position Overview: The Maintenance Team Lead is a hands-on leadership role responsible for overseeing the daily operations and performance of the maintenance team. This position bridges the gap between mechanics and supervisors by combining technical expertise with strong leadership and communication skills. The ideal candidate will be highly skilled in mechanical and electrical maintenance, fluent in both English and Spanish, and capable of managing and developing team members. Responsibilities/Technical Duties • Perform hands-on maintenance, including troubleshooting, repairing, and maintaining machinery and equipment such as motors, pneumatic tools, conveyor systems, and production machines., • Diagnose and resolve mechanical, electrical, and control system issues using precision measuring and testing instruments., • Conduct preventive maintenance following diagrams, sketches, operations manuals, and engineering specifications., • Adjust, calibrate, and program equipment, including PLCs, VFDs, HMIs, and other control systems., • Ensure compliance with safety standards during high-voltage electrical work and other complex repairs., • Fabricate parts using machine shop tools as needed to minimize downtime., • Lead and supervise a team of mechanics, ensuring tasks are assigned and completed efficiently., • Provide technical guidance and support to team members to address complex maintenance challenges., • Assist in the training and onboarding of new mechanics, ensuring team skill development., • Collaborate with supervisors to create and manage work schedules, balancing maintenance priorities with production needs., • Foster a culture of accountability, teamwork, and continuous improvement within the maintenance department., • Support the development and implementation of maintenance procedures and schedules., • Monitor inventory levels of tools, parts, and supplies; coordinate with the Maintenance Coordinator for procurement as needed., • Ensure compliance with food safety, quality, SOP, and GMP policies and procedures., • Conduct safety inspections and participate in accident investigations, ensuring corrective actions are implemented., • Minimum of 5 years of hands-on experience in maintenance, with a strong background in mechanical and electrical systems., • Technical degree, university degree, or equivalent on-the-job experience preferred., • Proven leadership skills with the ability to train, guide, and motivate team members., • Strong bilingual communication skills (English and Spanish) to effectively interact with a diverse team and workforce., • Proficient in troubleshooting and repairing PLC hardware and programming, control circuits, and high-voltage systems., • Familiarity with building systems such as plumbing, HVAC, and refrigeration is a plus., • Proficient with Microsoft Office Suite and maintenance management software., • Must be able to walk the facility and diagnose equipment issues., • Capable of performing physical repairs, including lifting up to 50 pounds., • Mechanic: Focuses on executing technical maintenance tasks and repairs with limited leadership responsibilities., • Team Lead: Combines hands-on technical expertise with leadership responsibilities, serving as a bridge between mechanics and supervisors to ensure smooth operation and team development. ** **Disclaimer: ¨NBSP; **Employee must be able to perform the essential functions of the position satisfactorily and, if requested, reasonable accommodation will be made to enable employees with disabilities to perform the essential functions of their job, absent undue hardship. *Dr. Praeger's Sensible Foods is an Equal Opportunity Employer that does not discriminate based on actual or perceived race, creed, color, religion, alienage or national origin, ancestry, citizenship status, age, disability or handicap, sex, marital status, veteran status, sexual orientation, genetic information, arrest record, or any other characteristic protected by applicable federal, state, or local laws. Our management team is dedicated to this policy with respect to recruitment, hiring, placement, promotion, transfer, training, compensation, benefits, employee activities and general treatment during employment. Salary info: $40 - $42 / hr

Job Description We are currently seeking an Automotive Technician Automotive Mechanic to become an integral part of our team! You will diagnose, adjust, repair, and overhaul automotive vehicles. Join the Tom's Volkswagen of Union team! We’re thrilled to announce exciting opportunities at our brand-new Tom’s Volkswagen of Union site. We’re on the lookout for enthusiastic individuals to help us expand across all departments. Both of our facilities offer a collaborative and family-oriented atmosphere, making every workday enjoyable. We’re dedicated to empowering our teams to enhance productivity and efficiency, ensuring you thrive in your role. If you’re ready to become part of a winning team, we can’t wait to receive your application Job Type: Full-time Pay: Commensurate with experience Benefits: • Dental insurance, • Disability insurance, • Employee discount, • Flexible schedule, • Health insurance, • Paid time off, • Referral program, • Vision insurance, • Bonus pay · Dealer experience a PLUS but not required Language: • Dependable -- more reliable than spontaneous, • People-oriented -- enjoys interacting with people and working on group projects, • Adaptable/flexible -- enjoys doing work that requires frequent shifts in direction, • Detail-oriented -- would rather focus on the details of work than the bigger picture, • Achievement-oriented -- enjoys taking on challenges, even if they might fail, • Innovative -- prefers working in unconventional ways or on tasks that require creativity, • Diagnose and repair automotive vehicles, • Perform routine vehicle tune-ups and maintenance, • Provide labor and time estimates for automotive repairs, • Previous experience as an automotive technician, mechanic, or other related fields, • Knowledge of diagnostic and repair equipment, • Strong mechanical aptitude and troubleshooting skills, • Deadline and detail-orientedCompany DescriptionToms River Auto Group is a vibrant company with fun and energetic employees! Our dealer group is comprised of Toms River Volkswagen, and Toms River Mitsubishi, and also our newest acquisition- Tom's Volkswagen of Union.Toms River Auto Group is a vibrant company with fun and energetic employees! Our dealer group is comprised of Toms River Volkswagen, and Toms River Mitsubishi, and also our newest acquisition- Tom's Volkswagen of Union.

Job Description First for a reason: At First Student, we are a family of 60,000+ employees who take pride in safely transporting more than 5 million students and passengers to and from their destinations each day! Our family of brands include Transco, Total Transportation, Maggies Paratransit, and GVC II. Our employees are at the forefront of safety and innovation; they create and implement the most advanced training and technology the transportation industry has to offer. About the Role Are you ready to grow your career in vehicle maintenance? First Student is hiring a skilled Technician II to keep our fleet running safely and reliably. In this hands-on role, you'll perform a mix of routine and advanced mechanical work on school buses, vans, and other vehicles, while working under moderate supervision. You'll also support senior technicians and help guide junior team members. If you have solid mechanical skills, take pride in safety and organization, and are looking for an opportunity to advance-this could be the role for you. $25.00/hr What You'll Do * Perform preventative maintenance, visual inspections, and minor repairs (bulbs, belts, fluids, filters, batteries, hoses, etc.) * Complete more advanced mechanical repairs under moderate supervision-brakes, tune-ups, suspension, clutches, drive trains, and more * Assist Technician III with PMs, safety checks, and major component replacements (engine, transmission, differential) * Diagnose and troubleshoot vehicle and equipment issues with accuracy * Respond to road calls and emergency repairs as needed * Maintain accurate records of completed work, including parts usage and work orders * Move vehicles safely around the yard and maintain a clean work environment * Help maintain and repair shop equipment * Clean vehicles as requested * Follow all company safety policies and procedures What We're Looking For * High school diploma or GED preferred * Vocational or technical certification in vehicle repair preferred * 3+ years of diesel or automotive repair experience (or equivalent education/experience) * Valid driver's license * Class B CDL with passenger endorsement (or ability to obtain within 3 months) * ASE Certification preferred; must participate in ASE testing and obtain 3 ASE certifications within 12 months * Intermediate mechanical and diagnostic skills * Ability to work independently and as part of a team * Organized, detail-oriented, and safety-focused * Comfortable with hand tools and diagnostic software * Strong communication and customer service skills * Must have personal tool inventory suitable for the role Physical Requirements * Must be able to lift at least 50 pounds * Ability to work in all weather conditions and in shop environments with dust, grease, and noise * Must be able to work in crouched or prone positions using a creeper under vehicles Why Join First Student? * Competitive pay and potential shift premiums * ASE certification support and career growth opportunities * Positive and safety-first work environment * Nationwide footprint with room to advance Keep our fleet moving-and our communities safe. Apply today and take the next step in your mechanic career! In the state of Washington, all technician and driving positions, including but not limited to van drivers and any other position requiring employees to drive a company-owned vehicle, are considered safety-sensitive and are therefore subject to drug and alcohol testing, including cannabis. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status. First is also committed to providing a drug-free workplace. First will consider for employment qualified applicants with criminal histories consistent with the requirements of the San Francisco Fair Chance Ordinance, Los Angeles Fair Chance Ordinance, and any other fair chance law. Philadelphia's Fair Criminal Record Screening Standards Ordinance Poster is at this link or upon request .

Job Description Job Title: Automotive Master Technician / Mechanic (A Tech) Department: Market Operations (Field) Employee Type: Full Time, Non-Exempt Compensation: $45- $77/hr. + Benefits (day one) + Sign on Bonus $5,000* Flexcar is completely reimagining car ownership. We offer the world’s first month-to-month car lease, with insurance and maintenance included. Members can swap cars anytime as their needs change, without the commitment or hassle of traditional car ownership. By combining operational expertise with technology, data, and AI, we’re transforming every aspect of the customer journey and delivering a more affordable, flexible, and hassle-free alternative to buying or leasing. We are looking for a Master Technician to help drive our success. In this hands-on, high-impact role, you'll perform advanced diagnostics and repairs, oversee shop operations, and mentor a growing team of technicians. You’ll be the cornerstone of safety and quality in our fleet—and a key voice in shaping how we scale. What you’ll love about this role: * Top-Tier Pay * Path to leadership with responsibility over shop processes and technician development * Supportive culture that values your experience and gives you room to grow * Real impact—every repair you touch ensures a safe and reliable ride for our members What you’ll do: * Diagnose and repair complex vehicle systems (drivability, electrical, HVAC, engine, drivetrain, brakes) * Deliver quality work that exceeds internal and customer expectations * Ensure all work is completed to Flexcar standards, on time and on budget * Train and develop new and junior technicians * Lead by example in safety, professionalism, and technical accuracy * Assist in onboarding new team members and creating a strong shop culture * Manage shop workflow and prioritize high-impact work * Ensure proper use and maintenance of tools, equipment, and supplies * Maintain a clean, safe, and organized workspace aligned with 5S standards * Collaborate with site managers on planning, scheduling, and inventory needs What drives success for this role: * 5+ years of hands-on automotive repair experience * ASE Master Technician Certification (or equivalent experience; L1 preferred) * Strong leadership, coaching, and communication skills * Ability to diagnose and repair gas-powered vehicles across multiple systems * Familiarity with shop software and the ability to use Excel and diagnostic platforms * Valid driver’s license and clean driving record * Flexibility to work weekends, holidays, and varied shifts as needed * Able to lift up to 75 lbs and work in all weather conditions What tops off the tank: * Rest & Relax! Potential to accrue 80 hours of PTO your first year, and up to 120 hours in later years plus multiple company paid holidays and 40 hours of Sick time. * Save for Your Future! 401(k) with company match from day one of hire * Benefits: Excellent, low-cost healthcare coverage including: medical, dental, vision, eligibility day one. Wellness Programs, Flexible Spending Accounts, Health Savings Account, Life and Disability Insurance * Drive a Flexcar! Discounted employee rate on Flexcar products and no annual membership fee * Weekly Pay and Employee Referral Bonus * Uniforms * Tools and Education: Reimbursement for ASE certifications and yearly tool allowance paid directly to you. *Sign on bonus paid on 90th day of employment. Disclaimer: This job description may not be inclusive of all assigned duties, responsibilities, or aspects of the job described, and may be amended at anytime at the sole discretion of the Employer. Flexcar is an Equal Opportunity Employer and prohibits discrimination and harassment of any kind. Flexcar provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. Flexcar is an Equal Opportunity Employer and prohibits discrimination and harassment of any kind. Flexcar provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. Powered by JazzHR 5inOKR7UMd

Job Description TOP TECHNICIAN NEEDED! We are currently seeking a Master Automotive Technician to become an integral part of our team! We need a top level tech to complement our team. Hours and pay are negotiable and flexible. We are looking to pay top price for a top technician. Experience, certifications and level will determine level of pay. If interested and would like to do less hands on, we have options to be the shop foreman as well. You will diagnose, adjust, repair, and overhaul automotive vehicles. Responsibilities: • Diagnose and repair automotive vehicles, • Perform routine vehicle tune-ups and maintenance, • Previous experience as an automotive technician, mechanic, or other related fields, • Knowledge of diagnostic and repair equipment, • Strong mechanical aptitude and troubleshooting skills, • Deadline and detail-orientedCompany DescriptionFamily owned automotive repair business in a great town with great clientele.Family owned automotive repair business in a great town with great clientele.

Job Description WE ARE CURRENTLY PAYING UP TO $75.00 PER HOUR DEPENDING ON EXPERIENCE PLUS SIGN ON BONUS THE FOLLOWING ITEMS ARE SOME OF THE REQUIRMENTS OF PERFORMING THIS POSITION. • Oversee operations in an auto service unit to ensure compliance with quality standards, • Contact clients and convince them to bring vehicles to their unit for repairs, • Oversee the inspection of automobiles to identify faulty components and facilitate process for repairs, • Supervise the activities of automotive service technicians to ensure efficient job performance and timely repairs, • Conduct price negotiations with clients to reach a favorable bargain for both management and client, • Oversee the hiring and training of an effective auto service team, • Maintain accurate record of all accounts and relevant financial information, • Monitor inventory to regulate and ensure availability of required vehicle parts, • Ensure automotive service staff comply with environmental laws and regulations, • Oversee the procurement of vehicle parts, automotive equipment and various other items required in an auto service department, • Evaluate the performance of automotive service staff in order to acknowledge efficient employees and guide underperforming ones, • Listen to client complaints and assist in addressing their issues and resolving challenges, • Oversee the disposal of wastes such as used engine oil, soot to ensure adherence to health and safety laws, • Assign and schedule work duties to auto service staff according to their skills, • Follow up customers to obtain feedback and ensure they are satisfied with received service, • Attend workshops and study relevant publications to stay up-to-date with developments in the automotive service industry., • Strong communication and customer service orientation: A good mechanic must be able to communicate and relate very well with customers. This quality is very important in conveying information on car condition to customers and convincing them that you are capable of handling the problem. Customers will always feel at ease when complex technical issues are explained to them in plain language that they can easily understand, • Good diagnostic and problem solving skills: A good auto mechanic should be able to quickly identify the source of minor problems manually. For complex problem, using diagnostic tools is important. Also, it is very important that the mechanic is able to fix or proffer solution to the problems in real time, • Dexterous and energetic: He/she should be skilled at using complex and hand tools. In addition, he/she must be energetic and have the stamina to sit, stand, bend, kneel, and squat while carrying out his/her job, • Educated and certified: These two requirements may not be mandatory, but they are necessary. For one to be employed as a mechanic, he/she must be trained. Going ahead to obtain a recognized certificate like the ASE certificate for auto technicians presents him/her as a true professional. Also, most employers prefer to hire auto mechanics with minimum qualification of high school diploma, • Innovative and ability to learn fast: A good automobile mechanic must always be on the lookout for better techniques and tools for carrying out his/her duties. He/she must be able to learn and adapt fast to changes in diagnostic and repair technology. WE OFFER THE FOLLOWING BENEFITS • PAID SICK DAYS, • PAID VACATION, • TOP TOP, • UNIFORMS Maplecrest Ford Lincoln does not discriminate in employment opportunities or practices on the basis of race, color, religion, sex, national origin, age, disability or any other characteristic protected by law. In order to provide equal employment and advancement opportunities to all individuals, employment decisions at Maplecrest Ford Lincoln will be based on merit, qualifications and abilities. Job Description The statements included in the job description are intended to outline the general nature and level of work being performed by people assigned to this classification. They are not to be construed as an exhaustive list of all responsibilities, duties, and skills. All personnel may be required to perform duties outside of their normal responsibilities from time to time, as needed Powered by JazzHR TV8YOSIsXs

Job Description SUMMARY: Service Technicians, Quick Lane Tire & Auto Center has immediate openings for service technicians. Quick Lane offers an excellent work environment in a state-of-the-art facility. We offer factory-driven technical training with a clearly defined career path for advancement opportunities within the dealer network. In this role, the technician will have the skills to perform the following: service and repairs, brakes, alignments, scheduled maintenance, drivetrain, diagnostics, suspension, steering, and chassis parts. ESSENTIAL DUTIES AND RESPONSIBILITIES (Other duties may be assigned) • Ensures vehicle inspections are completed thoroughly and accurately, • Communicates the results of the inspection process with the service advisor, • Performs work specified on the repair order with efficiency and in accordance with dealership policies, • Works well within a team environment QUALIFICATIONS • Previous technician experience required, • ASE and/or Mechanic Certification preferred, • Valid driver's license EDUCATION and/or EXPERIENCE • High School Diploma required, • Certification from Mechanical Training a plus LANGUAGE SKILLS • English PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to do the following: • Lift automotive batteries and tires, • Work with shop tools and equipment WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • Work in a retail tire and auto service environment

Job Description Overview Amerit Fleet Solutions, one of the leading fleet maintenance companies in the US, is looking to hire a skilled Automotive/Diesel Technician in Brooklyn, New York! The Automotive Technician is responsible for the timely repair and maintenance of light to medium duty fleet vehicles to ensure a safe and efficient operation. Fantastic Shop location, 3 Technician's Shop, Medium-Duty up to Ford 450. Must have strong scan tool expertise and repairs for Front End, Suspension, Engine, Electrical repairs. Shift: Monday - Friday 9:00 am - 5:30 pm Pay Range: $30.00/hour - $40.00/hour, dependent on experience. The benefits of belonging – what’s in it for you? • Full benefits within 30 days, • Medical, dental, vision, prescription drug coverage, life insurance, disability insurance, • 401(k) match program, • Paid vacation, holidays, and sick time, • Commitment to your safety through boot and prescription safety glasses reimbursement, • Career and learning development with an extensive training program through our Amerit University, • Employee referral program, up to $1,000 bonus, • ASE certification program with fee reimbursement and bonus, • Employee recognition platform that includes opportunities to redeem points for merchandise, • Employee Assistance Program (EAP), • 24/7 nurse triage line, • Employee discounts on cell phone service and entertainment tickets, • Employee resource groups (ERGs) that foster inclusion, • Prepare vehicle records and report both manually and on a computer, • Perform repairs and preventative maintenance to light and medium duty vehicles, • Perform safety inspections of equipment and prepare safety documentation required, • Comply with all applicable laws/regulations, as well as company policies/procedures, • Inspect and perform work on the under parts of vehicles, • Access any area of the equipment or vehicle to perform necessary maintenance, • Move parts to and from the job site and remove or install these parts on vehicles, • Interact with clients through both email and phone as necessary, • At least 5 years’ experience performing vehicle maintenance or must possess auto or diesel technology diploma from an accredited technical school, • Must have valid Driver’s License, • Proficient computer skills: knowledge of Excel, Word, Fleet Management Systems, and Email, • Strong written and verbal communication skills (documentation, communication with peers, supervisors, etc.), • Must be able to operate a manual transmission vehicle to determine if operating properly, • Exposure to heavy traffic areas while performing the duties of the job., • Exposure to considerable amounts of dust, diesel fumes and noise., • Exposure to chemicals, oils, greases or other irritants, • Access any area of the equipment or vehicle to perform necessary maintenance, • Ability to move and position heavy objects, • Ability to bend, stoop, crouch, kneel and crawl to repair vehicles #Mechanic #Hiring #AutoMechanic #NowHiring #AutomotiveCareer #MechanicJobs #AutomotiveTechnician #HiringinBrooklyn #NewYork #NewJobInNewYork #HiringElectrical #HiringAutomotive #Ford #MediumDuty #Suspension #FrontEnd #Engine #Diagnostic INDTC

Job Description Overview Amerit Fleet Solutions, one of the leading fleet maintenance companies in the U.S., is looking to hire a skilled Autonomous Vehicle Service Technician/Mechanic to repair, maintain, and retrofit our fleet of Electric Autonomous Vehicles (EV/AV). The ideal candidate is an experienced and eager technician with a growth mindset, looking to propel their career in a dynamic and cutting-edge industry. If you’re interested in expanding your knowledge and experience in the Autonomous Vehicle Industry, this is the job for you! Compensation: Competitive hourly pay; paid weekly, every Friday! $40-48/hr based on experience Shift: Tuesday - Saturday: 6:00am-2:30pm The benefits of belonging – what’s in it for you? • Competitive hourly pay – paid weekly, every Friday, • Full benefits within 30 days, • Medical, dental, vision, prescription drug coverage, life insurance, disability insurance, • 401(k) match program, • Paid vacation, holidays, and sick time, • Commitment to your safety through boot and prescription safety glasses reimbursement, • Career and learning development with an extensive training program through our Amerit University, • Employee referral program, up to $1,000 bonus, • ASE certification program with fee reimbursement and bonus, • Employee recognition platform that includes opportunities to redeem points for merchandise, • Employee Assistance Program (EAP), • 24/7 nurse triage line, • Employee discounts on cell phone service and entertainment tickets, • Employee resource groups (ERGs) that foster inclusion Assisting technician team with service and repair of electrical, mechanical, and integration issues on autonomous vehicles and their equipment Performing software and firmware updates Following processes and documenting potential improvements and issues Collaborating with internal engineering and service teams to troubleshoot and diagnose issues Creating repair orders, documenting work performed stating the diagnosis, procedure performed, and parts required Creating issue tickets with engineering teams, following up with open issues to resolve Performing work with safety being top priority Participating in continuing education and training Assisting with fleet-wide hardware and software retrofits Qualifications: What you must have 4 - 8 years of experience working on cars (brakes, advanced suspension, alignment, electrical repair and diagnosis, software/firmware updates, diagnose nuanced mechanical, electrical, and A/C systems. Complex HW retrofits and AV HW replacement, diagnostic on nuanced AV and EV systems) Ability to work with hand tools, power tools, automotive shop equipment (e.g., impact guns, air tools, automotive lifts, floor jacks, etc.) Hands-on experience with mechanical, electrical, and software engineering components and an understanding of how they interact Strong computer skills, and strong aptitude to pick up new technology. Impeccable communication skills A learning mindset including an open mind to constructive feedback A proven track record of emphasizing safety and quality of work Ability to give and receive clear and concise verbal and written directives Ability to perform regular physical work including, but not limited to, stooping, lifting, and moving up to 50 pounds Ability to anticipate future setbacks to mitigate operational progress and growth Able to juggle numerous projects simultaneously with ease Comfort in a dynamic and fast-paced work environment High attention to detail A plus if you have: Experience with sensors, calibration, and/or the autonomous automotive field Dealership training and automotive experience Experience with Linux, Java, Python, C++, Jira, Confluence, G-Suite, and Slack is a plus Previous experience diagnosing and performing repairs on electric and/or hybrid vehicles ASE certifications Working conditions: Exposure to heavy traffic areas while performing the duties of the job. Exposure to considerable amounts of dust, diesel fumes and noise. Exposure to chemicals, oils, greases, or other irritants Access any area of the equipment or vehicle to perform necessary maintenance Ability to move and position heavy objects Ability to bend, stoop, crouch, kneel, and crawl to repair vehicles Ability to work outside in various weather conditions.

Job DescriptionDescription: About Us Vantage Auto is a family-owned and operated dealership and service center known for our passion for unique, high-quality vehicles. From modern luxury cars to rare classics, we work on a wide variety of makes and models—no two days are ever the same. Our commitment to excellence, personalized customer service, and a tight-knit team culture set us apart in the industry. Position Overview We are seeking an experienced Automotive Mechanic to join our growing team. The ideal candidate is skilled, reliable, and passionate about cars. You'll be working on a diverse range of vehicles—everything from European luxury sedans to vintage Japanese coupes. If you take pride in your work and want to be part of a company that values craftsmanship and integrity, we want to hear from you. Responsibilities • Diagnose and repair a wide variety of vehicles with precision and efficiency, • Perform routine maintenance including oil changes, brake service, and inspections, • Troubleshoot mechanical and electrical issues using diagnostic tools, • Maintain clean, organized, and safe work environment, • Communicate clearly with service writers and team members about job status and requirements, • Stay current with manufacturer and industry service standards Requirements • Minimum 3 years of professional automotive repair experience, • Strong diagnostic and mechanical skills across multiple vehicle brands, • Ability to work independently and as part of a team, • Valid driver’s license and clean driving record, • ASE Certification preferred but not required, • Passion for unique and high-end vehicles a big plus What We Offer • Competitive compensation based on experience, • Family-oriented work environment with supportive management, • Opportunities to work on rare, collector, and luxury vehicles, • Access to modern equipment and tools, • Career growth opportunities in a thriving automotive businessRequirements:

Job Description We're looking for Automotive Mechanics with a minimum of 6 months of professional automotive repair experience to join us at Carvana - the fastest-growing used automotive retailer in U.S. history and one of the four fastest companies to make the Fortune 500. As an Entry-Level Technician, you'll be expected to perform light maintenance, fluid checks, and/or conduct the initial inspection on our vehicles to look for any imperfections or repairs that may be needed throughout the reconditioning process. At Carvana, you'll receive a competitive wage and amazing perks – including a 401(k) with Carvana match and even a vehicle purchase discount – all while using state of the art tools in one of our high-tech Inspection Centers (click here to learn more). If you're joining us in an entry-level position, we offer training programs to make sure your skills and pay progress along with the company. Other perks of the Job • 100% company-paid healthcare premiums, • Generous paid-time off and your birthday is a holiday!, • ASE and tool reimbursement programs, • Tuition reimbursement and student loan repayment Schedule: We do everything we can to deliver an exceptional customer experience, and that includes delivering great vehicles when expected. If we're in a pinch, mandatory overtime is one way in which we can follow-through on this commitment to our customers. We're looking for team players who are all in on our mission and are able to work mandatory overtime based on our business needs. Starting Pay: $18-$20 per hour How To Get Started Join the Carvana team by applying on this page, or call one of our recruiters by phone at (888) 508-4749, Monday through Friday, between 6 AM and 4 PM MST. Not a match for this role? We have a variety of Technician roles in our Inspection Centers, depending on your level of experience - take a look below to see what you'll be doing to help us get our low-mileage, late-model cars ready for our customers: • Entry-Level Auto Technician (min 6 months professional experience): perform light maintenance, fluid checks, and/or conduct the initial inspection on our vehicles to look for any imperfections or repairs that may be needed throughout the reconditioning process., • Brake and Tire Technician (min 1 year professional experience): perform light maintenance or repairs, including changing brakes and tires, • Mid-Level (Mechanical Repair / Build / General) Technician (min 3 years of professional experience): perform light to medium automotive repairs and minimal diagnostics on our vehicles, • Auto Body roles: Paint, Prep/Body work, Wheel Repair, Airbrush, Interior Repair, Glass Repair, and PDR (Paintless Dent Repair) roles, • Auto Technician/Mechanic roles: Lube and Oil, Inspection, Brake and Tire, Mechanical Repair / Build, and Master Technician roles, • Ability to physically operate vehicle equipment and tools - must be able to lift up to 60 pounds independently, • Must be at least 18 years of age and possess a valid driver's license. Some positions may be subject to an Motor Vehicle Records (MVR) check, • An ability to work in a fast-paced, ever-changing production environment while sometimes being exposed to excessive weather conditions (heat/cold) To make sure our cars are in first-rate condition, we've built multiple vehicle Reconditioning Centers around the country, where our cars are inspected, perfected, and photographed before reaching the Carvana website. Think you've got what it takes to join our team? Apply today! Carvana is an equal employment opportunity employer. All applicants receive consideration for employment without regard to race, color, religion, gender, sexual orientation, gender identity or expression, marital status, national origin, age, mental or physical disability, protected veteran status, or genetic information, or any other basis protected by applicable law. Carvana also prohibits harassment of applicants or employees based on any of these protected categories. Hiring is contingent on passing a complete background check. This role is not eligible for visa sponsorship. Must be at least 18 years of age and possess a valid driver's license. Must be able to read, write, speak and understand English.